5724bef14d
VTOL att controller: Code style fix
2017-07-02 20:59:25 +02:00
c8189b9c23
navigator mission_block check range for loiter exit
...
- fixes #7510
2017-06-29 21:28:26 +02:00
d5eab23f53
airspeed error message clarification ( #7497 )
...
In day to day practice, there are two reasons for fabsf(airspeed.differential_pressure_filtered_pa) > 15.0f
1/ The sensor has not been calibrated. In this case, the sensor needs to be calibrated.
2/ It's a windy day, and the operator has powered up the system without covering the pitot tube. In that case, you need to reboot with the pitot cover in place.
The original message ('Check calibration') is ok, but why not be more direct? The user does not have to "check the calibration" - the user has to (a) either calibrate the system in the first place, or (b) not forget the pitot tube cover when powering up the system.
2017-06-28 00:28:33 -04:00
d641d776f7
mc_pos_control delete unused velocity feed forwards
2017-06-26 11:31:25 -04:00
f947205cbe
delete vehicle_global_velocity_setpoint
2017-06-26 11:31:25 -04:00
7929287f73
Fix -Werror=format-truncation on GCC 7
...
Fix formatting
Check snprintf return for error AND overflow
2017-06-26 15:50:44 +02:00
407b403e68
Fix -Werror=maybe-uninitialized on GCC7
2017-06-26 15:50:44 +02:00
06c6a0cdec
Fix -Werror=implicit-fallthrough errors on GCC7
2017-06-26 15:50:44 +02:00
13bf312263
Commander: Be less verbose
2017-06-21 21:43:28 +02:00
d68dd6ae1e
ekf2: Fix parameter description typo
2017-06-21 09:28:42 +02:00
b3ceb37272
ekf2: Add parameter to set range dependant noise
2017-06-21 09:28:42 +02:00
929ecd0e94
change to uint32 to match updated type from ecl
2017-06-21 09:28:42 +02:00
33495e8143
ekf2: added parameters to specify horizontal speed and absolute altitude
...
thresholds for range aid mode
Signed-off-by: Roman <bapstroman@gmail.com >
2017-06-21 09:28:42 +02:00
b5a94481a8
ekf2_main: support range aid feature
...
Signed-off-by: Roman <bapstroman@gmail.com >
2017-06-21 09:28:42 +02:00
68c2eb9dec
ekf2_params: added range aid parameter
...
Signed-off-by: Roman <bapstroman@gmail.com >
2017-06-21 09:28:42 +02:00
8b3fb1e999
param fix parameters.xml dependency
2017-06-19 20:24:09 +02:00
6a443765a5
cmake only include mavlink where used
2017-06-19 20:24:09 +02:00
5984e3d330
mission: clean up mavlink log messages style
2017-06-19 19:34:18 +02:00
91a94ce874
check for NAN -> use curr pos and check if first to avoid drifting
2017-06-19 13:26:11 +02:00
7d23a52871
Commander: Remove debug output
2017-06-19 09:28:38 +02:00
28017105f4
position_estimator_inav: publish vertical position derivative
2017-06-19 09:09:52 +02:00
a147179ad8
local_position_estimator: publish vertical position derivative
2017-06-19 09:09:52 +02:00
4b7ae78fda
ekf2: publish vertical position derivative
2017-06-19 09:09:52 +02:00
4afa931d80
voted_sensors_update: fix mag rotation
...
fixes a wrong index for _mag_device_id: previously, driver_index was used
(the CAL_MAG param index), but the correct index is the uorb topic
instance.
2017-06-17 06:36:54 +02:00
fd47e0cbb3
Set system real time clock once from GNSS data.
...
Fixes #7421
Tested with Pixracer and Zubax GNSS2.0
2017-06-16 07:46:39 +05:30
bc406a122e
disable min loiter altitude
2017-06-15 09:18:35 +02:00
1c56cad3b1
Uses astyle 2.06
2017-06-15 08:56:49 +02:00
08891526fd
Fixes #6484 : Bug in Offboard mode incorrect use of type_mask
2017-06-15 08:56:49 +02:00
d5c923c7ef
Navigator: Fix RTL backtransition for VTOL
...
A recent change removed the command forwarding required for VTOL transitions. This change brings this back.
Partially reverts https://github.com/PX4/Firmware/pull/7249
2017-06-15 08:27:23 +02:00
e28f8bff67
commander: make commonly spoken strings more user friendly
...
these technical messages might not be suitable for the user of a product
2017-06-15 07:50:41 +02:00
5a96490c68
sensors : fix race condition triggered by slow-to-boot external sensors
2017-06-14 19:53:07 +02:00
51b23f0b57
sensors : add parameters for 4th mag into used parameters list
2017-06-14 19:53:07 +02:00
ce7d8d2270
sensor_mag.msg: add is_external flag & set it in the mag drivers
...
With this we don't have to use the ioctl MAGIOCGEXTERNAL, which does not
work on POSIX (eg. RPi).
2017-06-14 19:53:07 +02:00
ba3d66abba
voted_sensors_update: fix invalid/stale mag data on posix
...
Problem: _mag_device_id is used to get the correct rotation matrix for each
mag. But on POSIX, _mag_device_id was always 0, leading to invalid rotation
matrices.
This resulted in stale mag error messages (rot matrix=0 ==> mag data=0).
_mag_device_id was 0 because there are no /dev/magX devices (eg. on RPi),
thus the mag driver could not be opened.
This patch does: get the device id from the uorb topic instead. We still
need the device handle on certain platforms to apply the calibration params
and to check if the mag is internal or external.
Problem left: on POSIX, the check for external mag does not work.
2017-06-14 19:53:07 +02:00
76f593afb0
fix voted_sensors_update: remove DevMgr::releaseHandle(h);
...
the 'continue' continues with the inner loop, whereas the outer loop is
responsible for opening the handle. Thus the inner loop needs to keep it
open.
2017-06-14 19:53:07 +02:00
af6846b9a8
fix voted_sensors_update: use int32 for param_get()
2017-06-14 19:53:07 +02:00
ce27e75a76
sensors: better status output
2017-06-14 19:53:07 +02:00
c41185a277
Fixes valid yaw check
2017-06-14 01:23:37 +05:30
d9cec600ed
Fixes #7313 : Invalid setpoint yaw after takeoff
2017-06-14 01:23:37 +05:30
89a8c656f2
Unneeded includes
2017-06-13 11:50:00 +02:00
1a6d2c491b
Remove explicit template instantiation of Subscription<T>
2017-06-13 11:50:00 +02:00
550aee4da3
Remove explicit template instantiation of Publication<T>
2017-06-13 11:50:00 +02:00
3ff1f4d16f
Move uORB::Subscription template implementation to header
2017-06-13 11:50:00 +02:00
bd60f87283
move param jinja templates into relevant module
2017-06-12 12:18:53 -04:00
4937449890
move parameter unittest into systemcmds
2017-06-12 12:18:53 -04:00
f26cd01d16
param gen reorganize and fix DISABLE_PARAMS_MODULE_SCOPING
2017-06-12 12:18:53 -04:00
9b5de23553
add ref_timestamp (time when origin was set) to lpe
2017-06-12 09:39:41 +05:30
a1a0dd37dc
Commander: Only report GPS lost errors if armed
2017-06-11 11:19:25 +02:00
a25330762a
Commander: Adjust airspeed checks on prearm condition
...
The previous approach would work with old low-end sensors, but with new high-end sensors we get a lot of false alarms on the bench. Relaxing the check to only apply pre-arm will ensure its now only run when the user intents to take off, at which point the airframe should be with pitot covers off in the field.
2017-06-11 11:19:25 +02:00
d104f984d4
Sensors: print airspeed validator status
2017-06-11 11:19:25 +02:00
Lorenz Meier