fly316/PX4-Autopilot
7
0
Fork 0
mirror of https://gitee.com/mirrors_PX4/PX4-Autopilot.git synced 2026-06-27 10:00:35 +08:00
Code Issues Packages Projects Releases Wiki Activity
32,923 Commits 852 Branches 161 Tags
258e5ca5c986cc39e4e656dd38c071f10180e5cf
Commit Graph

32923 Commits

This Branch
This Branch
All Branches
Author SHA1 Message Date
Katrin Moritz 258e5ca5c9 Rename of the DF Robot Rover Airframe 2020-08-10 09:46:36 -04:00
Daniel Agar 97fc1db768 vehicle_local_position: rename yaw -> heading and add reset logic 
- vehicle_global_position yaw removed (redundant)
 2020-08-10 11:42:03 +02:00
bresch 33fb9d0c62 Commander: update home position yaw in case of EKF yaw reset 
This makes sure the drone lands in the correct orientation
during RTL even if the initial yaw at takeoff was wrong.
 2020-08-10 11:42:03 +02:00
bresch 0ad3ddd864 Tko ramp: fix takeoff issue with large tko ramp time 
Because the velocity starts with a positive value (down) to ramp-up
slowly the motors, the position setpoint (integral) was going down into
the ground, canceling the input of the velocity controller during the
early takeoff phase.
Instead of a smooth ramp, the behavior was a delay followed by a quick
takeoff or a land detection.
Setting the current altitude setpoint with the current altitude during
this phase avoids the canceling effect and creates a takeoff purely
velocity-based.
 2020-08-10 10:39:56 +02:00
Daniel Leonard Robinson fa4818e467 vehicles: add new vehicle type: Airship (#14862) 
Co-authored-by: Anton Erasmus <anton@flycloudline.com>
Co-authored-by: Beat Küng <beat-kueng@gmx.net>
 2020-08-10 08:52:51 +02:00
Daniel Agar 454433c2ef mpu9250: mag relax scheduling and checks 2020-08-09 14:24:49 -04:00
Daniel Agar fbc8e1b09e boards: mRo X2.1-777 fixes 
- ardupilot bootloader compatibility (first 3 sectors)
 - clock tree fixes
 - start mavlink
 - start mpu9250 magnetometer (only onboard mag)
 - fixes https://github.com/PX4/Firmware/issues/15466
 2020-08-09 14:24:49 -04:00
Daniel Agar e16c8fa345 boards: add new Holybro Pix32v5 2020-08-09 11:48:38 -04:00
SungTae Moon 9707ac5316 implement gazebo simulation based on RTPS for multiple UAVs (#15463) 
- add t option for target
   - add iris_rtps model (PX4/sitl_gazebo#558)
 2020-08-08 13:19:19 +02:00
Daniel Agar 3002e74b4f mavlink: publish telemetry_status per instance with all HEARTBEATS from the same system 
- one telemetry_status publication per mavlink instance
 - each telemetry_status has an array of HEARTBEATS
 2020-08-07 12:23:52 -04:00
Thies Lennart Alff f950fe8a38 uuv_att_control: added bodyrate setpoint to the geometric controller 
* added bodyrate setpoint to the geometric controller
* started switching to new uORB API
 2020-08-06 10:40:44 -04:00
Beat Küng 0f68121ae0 kopis 2 airframe: enable frsky telemetry 2020-08-06 00:08:23 -04:00
Beat Küng bc9be2d040 frsky_telemetry: add support for inverted single-wire S.Port on F7 2020-08-06 00:08:23 -04:00
Beat Küng b6052fbb11 nuttx: update submodule 2020-08-06 00:08:23 -04:00
Daniel Agar 3345bf39b8 cdev: remove unnecessary virtuals and increase opt level 
- poll, poll_notify, register_class_devname, unregister_class_devname aren't virtual
 - increase max optimization level on platforms that aren't flash constrained (MAX_CUSTOM_OPT_LEVEL)
 2020-08-05 19:07:32 -04:00
JacobCrabill b164174037 uavcan: stm32h7: Fix improper loopback handling 
Fixes #15305
 2020-08-05 12:42:27 -04:00
Daniel Agar f9c8d38e44 gitattributes eol=lf for nearly all file types 
- even windows notepad supports eol=lf these days, so I believe this is the right thing to do for sanity across cygwin, WSL, etc
 2020-08-05 11:32:26 -04:00
Daniel Agar de59d6c788 flight_tasks: pass previous setpoint as const reference 
- perform setpoint checks in place to simplify and avoid copy
 2020-08-05 10:50:15 -04:00
Beat Küng e28395a58b TRIG_MODE: update description to support 78 2020-08-05 09:02:58 +02:00
Hamish Willee 8c6bb697d8 Update json param field names 2020-08-05 07:35:01 +02:00
Igor Mišić f5283e0da1 spracing_h7extreme: OSD enabled with added internal SPI bus flag 2020-08-04 19:07:15 -04:00
Daniel Agar b6a17a6538 new IntrusiveSortedList container used for uORB, WorkQueues, and WorkItems 
- new intrusive linked list container (c++ template) that sorts on insertion
 - primarily for convenience inspecting things in the system like uORB or WorkQueues
 - uorb status or top sorted alphabetically 
 - work_queue status threads sorted by priority, then items sorted alphabetically within each
 2020-08-04 11:09:41 -04:00
Beat Küng dfc2160489 commander: update vehicle_status with at least 2Hz 
So we're sure it's logged.
 2020-08-04 10:53:20 -04:00
Beat Küng 5f8c6512b3 vehicle_status: add latest arming/disarming reason 
Makes it easier to debug.
 2020-08-04 10:53:20 -04:00
Daniel Agar 1f5d0cd2d0 Update submodule mavlink v2.0 to latest Tue Aug 4 12:39:39 UTC 2020 
- mavlink v2.0 in PX4/Firmware (b62b12460195df9f4cfe7d8424e79b2f47f9e599): https://github.com/mavlink/c_library_v2/commit/57be0ae2af8d020fe50d716e5ecfab7100d14816
    - mavlink v2.0 current upstream: https://github.com/mavlink/c_library_v2/commit/cdcea1c68565e435d18f88c12a4d5db20b070df1
    - Changes: https://github.com/mavlink/c_library_v2/compare/57be0ae2af8d020fe50d716e5ecfab7100d14816...cdcea1c68565e435d18f88c12a4d5db20b070df1
 2020-08-04 10:47:52 -04:00
PX4 BuildBot 201a3a19ff Update submodule ecl to latest Tue Aug 4 12:39:50 UTC 2020 
- ecl in PX4/Firmware (78d30efcf77284b21c130fd31061844ee561aa64): https://github.com/PX4/ecl/commit/77b11129fa567160a2ec442438ed513cb9de89e7
    - ecl current upstream: https://github.com/PX4/ecl/commit/7eb2b08eedb70817779bc7968cf34a4cf6f01fa0
    - Changes: https://github.com/PX4/ecl/compare/77b11129fa567160a2ec442438ed513cb9de89e7...7eb2b08eedb70817779bc7968cf34a4cf6f01fa0

    7eb2b08 2020-07-27 kamilritz - Yaw measurement jacobian to Vector4f
15d360f 2020-07-27 kamilritz - saved_mag_ef_cov to Squarematrix2f
7609bc6 2020-07-27 kamilritz - drag innov member variables to Vector2f
960b80e 2020-07-26 kamilritz - Do not update output filter a second time after reset to flow.
 2020-08-04 10:47:15 -04:00
Daniel Agar c40cf9a626 uORB: remove lost message count per DeviceNode 
- update 'uorb status' to print basic info for all advertised DeviceNodes
 - report vehicle_command gaps in commander, navigator, mavlink
 2020-08-04 10:34:11 -04:00
Beat Küng 4282b3dd47 TRIG_PINS: allow triggering on 78 while still using the lower 6 pins for pwm 2020-08-04 13:37:40 +02:00
Beat Küng ca189fefb7 v5x: use board-specific camera capture pin PI0 2020-08-04 13:37:40 +02:00
Beat Küng 316085c154 camera_capture: remove board-specific ifdef 2020-08-04 13:37:40 +02:00
Beat Küng 46208edfac fix camera_trigger: no need to check for '_pins[i] < num_gpios' 
_pins[i] >= num_gpios is a valid config.
 2020-08-04 13:37:40 +02:00
Beat Küng 002e671d3f fix pwm_out,dshot: set _num_outputs to 5 for mode_pwm5 2020-08-04 13:37:40 +02:00
Beat Küng 78e918ff3a fix pwm_out: respect _num_outputs for calling up_pwm_servo_set() 
_num_outputs is set according to the mode_pwmX call, which is required
for camera triggering.
This fixes camera triggering via PWM, as it avoids overwriting the channel.
 2020-08-04 13:37:40 +02:00
Silvan Fuhrer 7a71cbb9bf FlightTask Auto: use yaw setpoint from Navigator if disable_weather_vane is true 
When disable_weather_vane is true, the vehicle is aligning for the transition waypoint
(VTOL) and thus the yaw setpoint from Navigator should be used.

Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
 2020-08-04 11:45:08 +02:00
Daniel Agar a93052f9b2 boards/spracing/h7extreme: delete unused stackcheck build 2020-08-03 15:56:33 -04:00
Daniel Agar 834dcbeb3d add spracing_h7extreme_default to builds 2020-08-03 15:56:33 -04:00
Igor Mišić 7eaa48e36f New board: SP Racing H7 Extreme 
Authored-by: igor.misic <igor.misic@rimac@automobili.hr>
 2020-08-03 15:32:58 -04:00
Daniel Agar ba640acfcc mc_hover_thrust_estimator: validity flag and other small improvements/fixes 
- track and publish validity based on hover thrust variance, innovation test ratio, and hysteresis
 - only publish on actual updates or becoming inactive
 - fix dt (previous timestamp wasn't being saved)
 - use local position timestamp (corresponding) to accel data rather than current time to avoid unnecessary timing jitter
 - check local position validity before using
 - mc_hover_thrust_estimator: move from wq:lp_default -> wq:nav_and_controllers to ensure the hover thrust estimator runs after the position controller and uses the same vehicle_local_position data
 - land_detector: check hover thrust estimate validity and adjust low throttle thresholds if hover thrust is available
 - mc_pos_control: only use hover thrust estimate if valid
 2020-08-03 10:30:52 -04:00
Hamish Willee 958d5a36ec params: generate param metadata as MAVLink-compatible JSON component info (#15389) 2020-08-03 12:00:37 +02:00
Daniel Agar 6923d9eb64 Update submodule mavlink v2.0 to latest Sun Aug 2 16:36:28 UTC 2020 
- mavlink v2.0 in PX4/Firmware (71c633fabbc7a00f263ff8dc3d624afa73d80c4d): https://github.com/mavlink/c_library_v2/commit/cf6e8cb415d0e4e1a6722f8d0026de85f18f3057
    - mavlink v2.0 current upstream: https://github.com/mavlink/c_library_v2/commit/57be0ae2af8d020fe50d716e5ecfab7100d14816
    - Changes: https://github.com/mavlink/c_library_v2/compare/cf6e8cb415d0e4e1a6722f8d0026de85f18f3057...57be0ae2af8d020fe50d716e5ecfab7100d14816

Co-authored-by: PX4 BuildBot <bot@px4.io>
 2020-08-02 13:41:14 -04:00
PX4 BuildBot d3a14b3ff1 Update submodule sitl_gazebo to latest Sun Aug 2 16:36:22 UTC 2020 
- sitl_gazebo in PX4/Firmware (1191a0efe6): https://github.com/PX4/sitl_gazebo/commit/ce1eca2bd0bedf9305d09b622454fa21962d50ba
    - sitl_gazebo current upstream: https://github.com/PX4/sitl_gazebo/commit/037ce1b3b88b1c25abc1f525fbbbec84589d090d
    - Changes: https://github.com/PX4/sitl_gazebo/compare/ce1eca2bd0bedf9305d09b622454fa21962d50ba...037ce1b3b88b1c25abc1f525fbbbec84589d090d

    037ce1b 2020-07-24 Jan-Hendrik Ewers - Oversight fix from #544 (#553)
 2020-08-02 13:40:34 -04:00
Daniel Agar f5f2897486 land_detector: multicopter ground contact fixes, improvements, and cleanup 
- if "landed" and "maybe_landed" states are false then both the "hit_ground" and the "low_thrust" condition need to be true in order to detect landing
 - ground contact MC NAN setpoint workaround
 - ground contact additionally check acceleration setpoint
 - schedule with vehicle_local_position updates (most updates require valid local position)
 - don't allow LNDMC_Z_VEL_MAX to exceed MPC_LAND_SPEED
 - ground contact horizontal movement checks default to failed if estimates aren't available
 2020-08-02 13:37:23 -04:00
Daniel Agar 63a23957b1 rc/dsm: decode improvements 
- always check system field for validity
 - reject any data outside of "servo position" valid range from Spektrum specification
 - properly support XPlus channels (12+)
 - debug message if channel count changes
 2020-08-02 12:52:16 -04:00
Daniel Agar 1191a0efe6 Update ecl to geo_lookup, SymPy covariance, bugfixes 
Co-authored-by: Matthias Grob <maetugr@gmail.com>
 2020-08-02 12:26:48 -04:00
David Sidrane e2a9b68fc7 kinetis:Add kinetis_gpiosetevent in PX4 layer 
Adds a compatible gpiosetevent interface. The helper call the
   low level functions while providing a consistent API with
   xxxx_ gpiosetevent(uint32_t pinset, bool risingedge,
                      bool fallingedge, bool event, xcpt_t func,
                      void *arg);

   This wrapper was rjected upstream.
 2020-07-31 09:46:27 -04:00
David Sidrane 726b1aa8bb Add nxp_fmuk66-e to CI 2020-07-31 09:46:27 -04:00
David Sidrane e67486d603 nxp:Add support for rev E HW nxp_fmuk66-e 2020-07-31 09:46:27 -04:00
David Sidrane f8b6de24c7 nxp_fmurt1062-v1:Assign board_id 2020-07-31 09:46:27 -04:00
Steve Nogar 48bf9268c3 rename Mixer to MixerBase to resolve case-insensitivity on mac 2020-07-31 09:37:49 -04:00
TSC21 342b1c5ded microRTPS: client: properly set task/thread naming 2020-07-31 14:13:10 +01:00