Matthias Grob
7545249215
Add flight_mode_manager to all targets with mc_pos_control
2020-12-30 10:25:08 -05:00
David Sidrane
22bc176885
Added mft for queries
2020-12-02 20:40:23 -05:00
Beat Küng
d2644a3bf7
distance_sensor/sf0x: rename to lightware_laser_serial
2020-10-22 11:30:50 -04:00
SalimTerryLi
c037dbef21
Rename and move src/drivers/adc to src/drivers/adc/board_adc
2020-09-07 23:09:20 -04:00
Daniel Agar
5739cf27e5
boards: delete obsolete commented config systemcmd
2020-04-26 22:34:34 -04:00
Daniel Agar
7aa7f0ed95
switch remaining boards to new InvenSense IMU drivers
2020-04-07 09:59:12 -04:00
Daniel Agar
ad559a66a1
examples: add simple work_item example module
2020-04-06 09:43:55 -04:00
Daniel Agar
ca81175b07
rename drivers/px4fmu -> drivers/pwm_out
...
- split out header
2020-03-31 19:12:31 -04:00
Daniel Agar and bresch
f9794e99f8
move hover_thrust_estimator to new module (mc_hover_thrust_estimator)
...
* MC_HTE: unitialize with hover_thrust parameter
* MC_HTE: constrain hover thrust setter between 0.1 and 0.9
* MC_HTE: integrate with land detector and velocity controller
* MCHoverThrustEstimator: Always publish an estimate even when not fusing measurements. This is required as the land detector and the position controller need to receive a hover thrust value.
* MC_HTE: use altitude agl threshold to start the estimator
local_position.z is relative to the origin of the EKF while dist_bottom
is above ground
Co-authored-by: bresch <brescianimathieu@gmail.com >
2020-03-11 21:20:54 -04:00
Daniel Agar
4698a09b98
delete unmaintained outback challenge (OBC) bottle drop example
2020-03-05 14:09:31 -05:00
Daniel Agar
dc05ceaad2
create temperature_compensation module
...
- this is a new module for temperature compensation that consolidates the functionality previously handled in the sensors module (calculating runtime thermal corrections) and the events module (online thermal calibration)
- by collecting this functionality into a single module we can optionally disable it on systems where it's not used and save some flash (if disabled at build time) or memory (disabled at run time)
2020-01-20 21:42:42 -05:00
Daniel Agar
e951531b12
camera_feedback: move to WQ callback and uORB::Subscription
2019-11-30 15:49:55 -05:00
Daniel Agar
bc182e94e6
sensors split rc_update into new standalone module
2019-11-24 13:25:11 -05:00
Daniel Agar
8c38176d77
boards: alphabetize and sync common drivers and modules
2019-11-21 18:56:24 -05:00
Julien Lecoeur
a46581987c
Update matrix submodule and add pseudoinverse tests (tests matrix)
2019-11-21 13:06:59 -05:00
Daniel Agar
84fe64b1c2
create new multicopter rate controller module (mc_rate_control) split out of mc_att_control
2019-11-19 17:03:11 -05:00
Julien Lecoeur
8bf60662fa
fmu-v2: set CONSTRAINED_FLASH on all targets
2019-10-26 15:19:07 +01:00
Daniel Agar
6a0f5249f8
sensors: split out analog battery handling to new standalone battery_status module
2019-10-21 13:40:23 -04:00
Daniel Agar
f885d2274a
Revert "vtol_att_control: update parameter strings to class enum"
...
This reverts commit 5351f886ec
2019-10-03 11:28:51 -04:00
Daniel Agar
5351f886ec
vtol_att_control: update parameter strings to class enum
2019-10-02 19:43:32 -04:00
Daniel Agar
26364d44c9
px4_work_queue: command line status output and shutdown empty queues
...
* adds a work_queue systemcmd that will bring a tree view of all active work queues and work items
* WorkQueues now track attached WorkItems and will shutdown when the last WorkItem is detached
2019-10-02 12:23:17 -04:00
Daniel Agar
0486d69240
delete obsolete segway example
2019-09-28 15:05:50 -04:00
BazookaJoe1900
6ab5c2170e
remove unused pca8574 and oreoled drivers
2019-09-04 08:05:08 -07:00
Daniel Agar
3c8a41aff7
px4_fmu-v2 variants disable mpu9250
2019-09-02 12:42:18 -04:00
Beat Küng
f3fccf53f6
src/drivers/{kinetis,stm32}: move to arch-specific directories
2019-08-30 07:59:44 +02:00
Beat Küng
1cb6c36a00
adc: refactor into arch-specific directories
2019-08-30 07:59:44 +02:00
Beat Küng
ab43a83bed
platform: restructure (NuttX) architecture-specific code
...
updated: tone_alarm, px4io_serial, px4_micro_hal
2019-08-30 07:59:44 +02:00
Silvan Fuhrer
cedf14e2ba
Airspeed Selector: repurpose wind estimator into an airspeed (selection, validation) module.
...
This new airspeed module does:
-runns an airspeed validator for every airspeed sensor present, which checks measurement validity and estimates an airspeed scale
-selects another airspeed sensor if for the current one a failure is detected
-estimates airspeed with groundspeed-windspeed if no valid airspeed sensor is present
-outputs airspeed_validated topic
Signed-off-by: Silvan Fuhrer <silvan@auterion.com >
2019-08-09 10:55:05 +02:00
Timothy Scott
2ed00c9cb6
Rover: Rewrote gnd_pos_control and removed gnd_att_control ( #12239 )
2019-07-11 09:39:13 -04:00
Daniel Agar
15d1543f95
create systemcmds/i2cdetect tool to scan i2c bus
2019-07-06 10:28:16 -04:00
Mohammed Kabir
b334b75886
Move optical flow drivers to own subdirectory
2019-05-28 23:23:38 -04:00
Hamish Willee
257b90958f
Correct links to example docs
2019-03-15 08:05:54 +01:00
mcsauder
dc5f18bdcd
ToneAlarm class refactoring to implement an interface for hardware specific methods and a single ToneAlarm class.
2019-01-28 18:58:04 -08:00
Daniel Agar
739a02022b
position_estimator_inav: move to examples (start deprecation)
2019-01-27 22:15:39 +01:00
Daniel Agar
75b2053243
move uavcan from modules to drivers
2018-12-04 01:06:54 -05:00
Daniel Agar
bbab66d974
move vmount to modules (it's not a driver)
2018-12-04 01:06:54 -05:00
Daniel Agar
9d42480f4e
drivers create lights category (directory)
2018-12-04 01:06:54 -05:00
Daniel Agar
d4e06e517a
delete drv_gpio.h, modules/gpio_led, and fmu GPIO ioctls
2018-12-03 16:30:39 +01:00
Daniel Agar
e45e7aa8a6
move posix/tests/hello to examples/hello and include everywhere
2018-11-26 14:40:14 -08:00
Daniel Agar
3e0a3559a9
cmake use standard mechanisms for settings flags
2018-11-26 14:40:14 -08:00
Daniel Agar
c258534aa5
cmake px4_add_board document and cleanup
2018-11-26 14:40:14 -08:00
Daniel Agar
fa0fe4cac6
cmake remove need for platform px4_add_board_os
...
- explicitly set TOOLCHAIN on all NuttX targets
2018-11-26 14:40:14 -08:00
Daniel Agar
abb3817d31
boards new split VENDOR_MODEL naming convention
2018-11-26 14:40:14 -08:00
Daniel Agar
f692ad04d0
boards organization
2018-11-26 14:40:14 -08:00
Matthias Grob