- when switching to range finder use the current terrain estimate as
height sensor offset, otherwise spikes in the range measurements could lead
to a wrong offset
Signed-off-by: Roman <bapstroman@gmail.com>
- do not subtract the height sensor offset variable when computing the
baro offset from the local origin. The baro height offset is calculated
when baro is not fused and so the height sensor offset used in that case
is associated to another sensor and has nothing to do with the baro.
Signed-off-by: Roman <bapstroman@gmail.com>
the primary height source
- moved height control into single function in order to decide which sensor
should be used for estimating height
- under certain conditions allow to use the range finder to estimate height
even if it's not the primary height source
- fixed a bug where the delta time for the baro offset calculation was always
zero
- use methods to set height control flags to reduce code duplication and
to prevent bugs
Signed-off-by: Roman <bapstroman@gmail.com>
Use horizontal acceleration to check if yaw is observable independent of the magnetometer.
Use rotation about the vertical to check if mag raises are observable.
If neither yaw of mag biases are observable, save the magnetic field variances and switch to magnetic yaw fusion.
Use the last learned declination when using magnetic yaw fusion so that the yaw reference remains consistent.
When yaw or biases become observable, reinstate the saved variances and switch back to 3D mag fusion.
Use vertical velocity and position innovation failure to detect bad accelerometer data caused by clipping or aliasing which can cause large vertical acceleration errors and loss of height estimation. When bad accel data is detected:
1) Inhibit accelerometer bias learning
2) Force fusion of vertical velocity and height data
3) Increase accelerometer process noise
This is a functionally equivalent. It moves all of the code for the terrain estimator into a single function call from the main filter update, making it clear that it is independent of the main filter.
Taking off before passing GPS checks would cause airspeed or sideslip to be fused when the filter was still using a constant position assumption. This would cause large airspeed innovations, invalid wind estimates and degrade filter performance after GPS was gained and position and velocity was reset.
Enables wind estimation without an airspeed sensor and enables synthetic sideslip to be used with an airspeed sensor for improved wind state estimation.
Wind states and covariances are reset differently depending on whether airspeed is available.
