fly316/PX4-Autopilot
7
0
Fork 0
mirror of https://gitee.com/mirrors_PX4/PX4-Autopilot.git synced 2026-06-26 09:20:34 +08:00
Code Issues Packages Projects Releases Wiki Activity
28,648 Commits 852 Branches 161 Tags
115c31451c4688564bcb24a91fc109e1efe8d760
Commit Graph

1644 Commits

Author SHA1 Message Date
Daniel Agar 115c31451c SITL use EKF2_MAG_TYPE default value 2019-01-31 09:23:12 -05:00
Daniel Agar 8dc0509989 mpu9250: split icm20948 support out into new separate driver 2019-01-30 09:29:08 +01:00
Daniel Agar 1ded189f58 ROMFS rcS execute (optional) rc.board_defaults after AUTOCNF set 2019-01-18 11:23:01 -05:00
Daniel Agar fef65bf5c8 ROMFS split rc.board into defaults, sensors, and extras 2019-01-15 23:52:46 -08:00
Claudio Micheli d1da46ef46 Added generic UART configuration. 
Signed-off-by: Claudio Micheli <claudio@auterion.com>
 2019-01-15 09:17:24 +01:00
Claudio Micheli 7124cbf3af Fixed CI broken build. Made TELEM2 default port. 
Device port can be set via SENS_EN_CM8JL65 parameter:
SENS_EN_CM8JL65 = 0 -> Disabled
SENS_EN_CM8JL65 = 1 -> Enabled on TELEM2
SENS_EN_CM8JL65 = 2 -> Enabled on TELEM1

Signed-off-by: Claudio Micheli <claudio@auterion.com>
 2019-01-15 09:17:24 +01:00
Claudio Micheli e4381bfc87 Added sensor enable/disable parameter (SENS_EN_CM8JL65). 
Disabled by default.

Signed-off-by: Claudio Micheli <claudio@auterion.com>
 2019-01-15 09:17:24 +01:00
bresch 766f911005 beta75 - Reduce MC_YAWRATE_P to avoid oscillations when battery is fully charged 2019-01-14 18:38:31 +01:00
bresch 118848d261 beta75 - Adjust PWM_MIN and set number of cells 2019-01-14 18:38:31 +01:00
Jake Dahl 1699c577c3 Fixed an issue with a local variable that should have been a member variable. Increased the P term to reduce rise time. Removed feedforward as it was not neccessary. Removed some custom commands that didn't serve much of a purpose. 2019-01-08 22:36:09 +01:00
Daniel Agar 1b8c2c82d5 px4flow start in rc.sensors instead of per board (#11123) 
- fixes #11009
 2019-01-01 11:39:40 -05:00
Daniel Agar 1f9b833342 ROMFS 4041 change nsh shebang to /bin/sh 2018-12-24 19:27:04 +00:00
Beat Küng 2790cace4f beta75X aiframe: exclude on most boards (only used on Omnibus) 2018-12-23 15:49:37 -05:00
Beat Küng 9f642c7ea7 airframes: add a config for the BetaFPV Beta75X 2S Brushless Whoop 2018-12-23 15:49:37 -05:00
Matthias Grob 95b472277c TBS Caipirinha: Prevent ESC beeping all the time 
Setting PWM_DISARMED to 0 results in no PWM output to the ESC for the pusher motor.
Most ESCs start beeping endless in short intervals if they don't get a signal.
I remove changing this parameter which is 900 by default to always command the motor to stand still.
 2018-12-23 12:21:30 +01:00
Julian Oes 73578a593f simulator: bring -t argument back 
The -t argument had been deleted because I didn't realize that it was
actually being used. Therefore, this brings it back and we now use -c
for TCP.
 2018-12-22 10:32:18 +01:00
Julian Oes b436f3dd56 ROMFS/Tools: switch to TCP connection for SITL 
This switches from UDP to TCP to connect to jMAVSim.
 2018-12-22 10:32:18 +01:00
Nuno Marques cfd1be584e Feature: VIO: add ODOMETRY stream (#11084) 
* mavlink_messages: remove LOCAL_POSITION_NED_COV stream

* mavlink_messages.cpp: add ODOMETRY stream

* add MAV_ODOM_LP parameter to activate odometry loopback

* EKF2: add vehicle_odometry publisher

* Replace VISION_POSITION_ESTIMATE loopback with ODOMETRY

* LPE: add vehicle_odometry publisher

* set vehicle_odometry local_frame field

* mavlink_messages.cpp: ODOMETRY frame_id depends on MAV_ODOM_LP
 2018-12-21 12:54:04 -05:00
Julian Oes 63ee101c51 rcS: fix exit value 
Shellcheck complained about returning -1 because that's essentially 255.
 2018-12-19 07:36:43 +00:00
Julian Oes 3ebf030a02 ROMFS: change shebang from #!zsh to #!/bin/sh 
This was required for shellsheck.
 2018-12-19 07:36:43 +00:00
Beat Küng 6a5108269e rcS tone_alarm: fix CBRK_BUZZER 
tone_alarm was started before the parameters were loaded, and the first
tune was played before that as well. CBRK_BUZZER was then read as default,
ignoring the user-configured value.

We now start tone_alarm after we load the parameters. Note that a
previously published startup tone or SD card error will still be played.
 2018-12-15 10:01:02 -05:00
David Sidrane 11f9925b02 rcS,rc.serial.jinja:ensure proper unset hygiene 
Delete auto generated vars, and others that were missed.
 2018-12-12 15:14:11 -05:00
Beat Küng dc49e259b3 logger: add separate profile for vision/avoidance 
Keeps things more modular.
 2018-12-07 11:51:59 +01:00
dakejahl 311c0941c9 Teal One airframe improvements for full support (#10860) 
* added a parameter for enabled the smart battery
* start tel1 and tel2 at 921600 and max rate
* turned up the max tx rate on mavlink streams for telem1 and telem2
* turned off mavlink stream for tel1 in 4250_teal. This is connected to TX1 FTDI UART and has issues.
* moved check to 4250 board ID to start mpu9250s for Teal airframe into fmuv4 rc.board.
 2018-12-05 09:49:58 -05:00
Daniel Agar 3a036021ba ROMFS defaults drop floating point decimal 2018-12-04 22:57:53 -05:00
Daniel Agar ecbf6ea77b ROMFS multicopter airframes don't call other airframes (4001/4002) 
- fixes #10980
 2018-12-04 22:57:53 -05:00
flochir ab9e9793a0 ICM20948 integration into MPU9250 driver (#10116) 
* Integrated preliminary ICM20948 support into MPU9250 driver.
Fixed temperature conversion for MPU9250/ICM20948.
* Included missing check for PX4_I2C_OBDEV_MPU9250 in main.cpp.
* Added explicit bus for internal MPU9250 on Pixhawk 2.1 to avoid implicit start
of an externally attached device with wrong orientation.
 2018-12-04 22:15:02 -05:00
Daniel Agar d4e06e517a delete drv_gpio.h, modules/gpio_led, and fmu GPIO ioctls 2018-12-03 16:30:39 +01:00
Daniel Agar 3e9e5ed372 ROMFS move airframes to subdirectory 2018-12-01 10:03:19 -05:00
Daniel Agar 7f0d2f23b7 move atmel_same70xplained init to rc.board 2018-12-01 10:03:19 -05:00
Daniel Agar 4240abad73 move bitcraze_crazyflie init to rc.board 2018-12-01 10:03:19 -05:00
Daniel Agar 0e980c1f83 move gumstix_aerocore2 init to rc.board 2018-12-01 10:03:19 -05:00
Daniel Agar a3fed608a6 move airmind_mindpx-v2 init to rc.board 2018-12-01 10:03:19 -05:00
Daniel Agar c9a2033c5b move auav_x21-v1 init to rc.board 2018-12-01 10:03:19 -05:00
Daniel Agar a8b91c7ac9 move intel_aerofc-v1 init to rc.board 2018-12-01 10:03:19 -05:00
Daniel Agar a4830f8d7b move omnibus_f4sd init to rc.board 2018-12-01 10:03:19 -05:00
Daniel Agar 60ade5d82b move av_x1-v1 init to rc.board 2018-12-01 10:03:19 -05:00
Daniel Agar aab08ad6fc move nxp_fmuk66-v3 init to rc.board 2018-12-01 10:03:19 -05:00
Daniel Agar c6a502f150 move fmu-v2/v3 init to rc.board 2018-12-01 10:03:19 -05:00
Daniel Agar 6c2436c2ca move fmu-v4pro init to rc.board 2018-12-01 10:03:19 -05:00
Daniel Agar d940f500f6 move fmu-v4 init to rc.board 2018-12-01 10:03:19 -05:00
Daniel Agar 25799c6e75 create board specific init script and use with fmu-v5 2018-12-01 10:03:19 -05:00
David Sidrane 729d1c32d3 Rename nxphlite-v3 to NXP fmuk66-v3 (#10927) 2018-11-28 12:13:21 -05:00
Daniel Agar ba6b71e619 px4fmu-v4 start ist8310 mag (optional external) 2018-11-27 09:29:48 -05:00
Daniel Agar abb3817d31 boards new split VENDOR_MODEL naming convention 2018-11-26 14:40:14 -08:00
Daniel Agar f692ad04d0 boards organization 2018-11-26 14:40:14 -08:00
CUAVcaijie eb8a3de987 add rgbled_ncp5623c driver (#10889) 
Co-Authored-By: CUAVcaijie <caijie@cuav.net>
 2018-11-25 13:40:51 -05:00
TSC21 e3af000fdb init.d-posix: make 1013_iris_vision independent of 1010_iris_opt_flow 2018-11-21 12:21:16 +01:00
TSC21 dcdddacdb2 init.d-posix: vision: set the appropriate parameters 2018-11-21 12:21:16 +01:00
Daniel Agar 8566b6b53e AV-X increase logger buffer 2018-11-21 09:13:40 +01:00