* heater: add multi-instance support, refactor parameter handling, remove legacy params file
This change introduces multi-instance heater support to allow independent temperature control for multiple IMUs.
Main changes:
- Add support for multiple heater instances
- Refactor parameter handling to use per-instance parameters
- Remove the legacy parameter file and migrate to the updated parameter structure
This improves scalability and makes heater configuration consistent across setups with multiple sensors.
* Refactor heater configuration across multiple boards
- Updated heater GPIO definitions to introduce a new naming convention for better clarity and consistency.
- Replaced `GPIO_HEATER_OUTPUT` with `GPIO_HEATER1_OUTPUT` and adjusted the corresponding output enable macros.
- Changed parameter names from `SENS_TEMP_ID` to `HEATER1_IMU_ID` in various board default configurations to reflect the new heater setup.
- Ensured all affected board configurations are updated to maintain functionality with the new heater definitions.
* heater: fix missing HEATER1_OUTPUT_EN control
* heater: fix more missing HEATER1_OUTPUT_EN control
* heater: tidy config, docs, and instance handling
- Remove unused controller period member and use CONTROLLER_PERIOD_DEFAULT
- Improve HEATER${i}_IMU_ID description and instance-related logging/behavior
- Add a guard when HEATER_NUM exceeds HEATER_MAX_INSTANCES
Note: drop intermediate/reverted change around the 'celsius' spelling.
* heater: refactor constructor to remove unused parameter and add instance name function
- Remove unused ModuleParams argument from Heater constructor
- Add heater_instance_name() helper to provide per-instance work queue task names
- Use instance-specific parameter lookup (HEATER{n}_*) during initialization
Use heater_instance_name() to label each instance (heater_1/2/3) in work queue.
Also drop unused ModuleParams argument from constructor and keep per-instance
parameter handle lookup in initialization.
* format
* board: update GPIO configuration for multiple heater instances, add HEATER_NUM for boards using PX4IO
* heater: update heater control to use HEATER1_OUTPUT_EN when using PX4IO for consistency
* heater: add a TODO for px4io multi-instance
* heater: update missing GPIO_HEATER1_OUTPUT in sky-drones
* heater: fix multiple newlines at EOF (resolve CI check failure)
* heater: switch to PublicationMulti for heater_status and log multi-instance
- Changed _heater_status_pub from Publication to PublicationMulti to support independent per-instance publications without overwriting.
- Updated logged_topics.cpp to use add_optional_topic_multi("heater_status")
This fixes the issue where multiple heater instances were writing to the same heater_status topic, causing data overwriting and incorrect update rates in logs.
---------
Co-authored-by: Jacob Dahl <dahl.jakejacob@gmail.com>
Co-authored-by: Jacob Dahl <37091262+dakejahl@users.noreply.github.com>
New GCC versions inline builtin function like memcpy. On the fmu-v6xrt we can't call the functions inside imxrt_ocram_initialize because the ram function still needs to be initialized.
This commit add a compile hint to not use builtins inside the imxrt_ocram_initialize function
nxp/rt117x:Fix Pin IRQ
nxp/rt117x:Support 4 i2c busses
nxp/rt117x:Add px4io_serial support
nxp/imxrt:Expand ToneAlarmInterface to GPT 3 & 4
px4_fmu-6xrt:Using imxrt_flexspi_nor_octal
px4_fmu-6xrt:Entry is start
px4_fmu-6xrt:Add Proper MTD
px4_fmu-6xrt:Set I2C Buses
px4_fmu-6xrt:Proper SPI usage
px4_fmu-6xrt:Adjust memory Map to use the 2 MB
px4_fmu-6xrt:Bring in ROMAPI
px4_fmu-6xrt:Push FLASH to 200Mhz
px4_fmu-6xrt:Use BOARD_I2C_LATEINIT
px4_fmu-6xrt:Clock Config remove unused devices
px4_fmu-6xrt:Remove EVK SDRAM IO
px4_fmu-6xrt:Enable SE550 using HW_VER_REV_DRIVE
px4_fmu-6xrt:Use MTD to mount FRAM on Flex SPI
px4_fmu-6xrt:Manifest
px4_fmu-6xrt:Restore board_peripheral_reset
px4_fmu-6xrt:Set I2C buss Interna/Externa and startup
nxp/rt117x:Set 6 I2C busses
px4_fmu-6xrt:Correct Clock Sources and Freqency Settings
px4_fmu-6xrt:Correct ADC Settings
px4_fmu-6xrt:Tune FlexSPI config and sync header with debug variant Linker prep for rodata ahb partitioning
px4_fmu-6xrt:FlexSPI prefetch partition split .text and .rodata
Current config
1KB Prefetch .rodata
3KB Prefetch .text
px4_fmu-6xrt:Run imxrt_flash_setup_prefetch_partition from ram with barriers
px4_fmu-6xrt:Use All OCTL setting from FLASH g_flash_config SANS lookupTable
px4_fmu-6xrt:Octal spi boot/debug problem bypass
px4_fmu-6xrt:Add PWM test
px4_fmu-6xrt:Fix clockconfig and USB vbus sense
px4_fmu-6xrt: Use TCM
px4_fmu-6xrt: Ethernet bringup
imxrt: use unique_id register for board_identity
px4_fmu-6xrt: update ITCM mapping, todo proper trap on pc hitting 0x0
px4_fmu-6xrt:correct rotation icm42688p onboard imu
rt117x: Add SSARC HP RAM driver for memory dumps
px4_fmu-6xrt: Enable hardfault_log
px4_fmu-6xrt: Enable DMA pool
px4_fmu-6xrt: fix uart mapping
px4_fmu-6xrt: enable SocketCAN & DroneCAN
px4_fmu-6xrt:Command line history TAB completion
px4_fmu-6xrt:Fix pinning duplication
px4_fmu-6xrt:Support conditional PHY address based on selected PHY
px4_fmu-6xrt:Add Pull Downs on CTS, use GPIO for RTS
px4_fmu-6xrt:Set TelemN TX Slew rate and Drive Strenth to max
px4_fmu-6xrt::Set TELEM Buffers add HW HS
px4_fmu-6xrt:Turn off DMA poll
px4_fmu-6xrt:RC_SERIAL_PORT needed to be px4io to disable rc_input using TELEM2!
px4_fmu-6xrt: bootloader (#22228)
* imxrt:Add bootloader support
* bootloader:imxrt clear BOOT_RTC_SIGNATURE
* px4_fmu-6xrt:Add bootloader
* px4_fmu-6xrt:bootloader removed ADC
* px4_fmu-6xrt:bootloader base bootloader script off of script.ld
* px4_fmu-6xrt:add _bootdelay_signature & change entry from 0x30000000 to 0x30040000
* px4_fmu-6xrt:hw_config Bootloader has to have 12 bytes
px4_fmu-6xrt:Default to use LAN8742A PHY
px4_fmu-v6xrt:VID Set to Drone Code
board_reset:Enable ability to write RTC GP regs
px4_fmu-6xrt:Fix CMP0079 error
rt117x:micro_hal Add a PX4_MAKE_GPIO_PULLED_INPUT
px4_fmu-v6xrt:Set CTS High before VDD_5V applided to ports to avoid radios fro entering bootloaders
fmu-v6xrt: increase 5v down time
fmu-v6xrt:Ready for Release DEBUGASSERTS off and Console 57600,
Bootloder updated.
imxrt:board_hw_rev_ver Rework for 3.893V Ref
px4_fmu-v6xrt:Move ADC to Port3
