This updates the GPS submodule which includes NMEA/Unicore fixes:
- Add correct return value for sat infos
- Only publish on position updates
- Request required topics at 5 Hz for Unicore
It looks like the BMP280 was heavily filtered, leading to a step
response of around 3 seconds. Comparing it to baro logs of BMP388 and
MS5611, it looks very slow.
I therefore suggest to disable the on device IIR filter which makes the
log data look more like the other baros.
* bugfix: NMEA GPS update rate was 0 since num_bytes_read was not being updated
* Update gps.cpp
style fix
* make format
---------
Co-authored-by: Jacob Dahl <dahl.jakejacob@gmail.com>
* uavcan: add GNSS heading from relposheading
* ekf2: new EKF2_GPS_YAW_OFF parameter to configure any offset in GNSS heading
Signed-off-by: dirksavage88 <dirksavage88@gmail.com>
Co-authored-by: Jacob Dahl <dahl.jakejacob@gmail.com>
- upstream libuavcan was broken and then marked deprecated, this fully absorbs the submodule (renamed libdronecan to deconflict) up to our last good working commit and all commit history is kept
- fixes https://github.com/PX4/PX4-Autopilot/issues/23727 (regression introduced in #23113)
- this puts us in a much better position to evolve the library as needed now that we have full control
* Use target camera in image capture start/stop messages
* Add support for MAV_CMD_SET_CAMERA_SOURCE
* Add target ID for NAV_CMD_SET_CAMERA_MODE
* Run make format
It looks like vertical velocity as well as velocity accuracy are not
available using NMEA, so we extract all velocities from the Unicore
ACRICA message instead.
* brought in the Vertiq Cpp API as a submodule. updated the serial rx handling so that we can parse out IQUART data packets
---------
Co-authored-by: Luca Scheuer <scheuer.luca@gmail.com>
* fixes to restart the state machine if sensor does not init correctly
Signed-off-by: dirksavage88 <dirksavage88@gmail.com>
* fixes
Signed-off-by: dirksavage88 <dirksavage88@gmail.com>
* increase fail count
Signed-off-by: dirksavage88 <dirksavage88@gmail.com>
* remove extra flush, switch from warn to debug, add enum states for sensor bring-up
Signed-off-by: dirksavage88 <dirksavage88@gmail.com>
* remove dead code, decrease restart fail count metric, break out of loop with consec errors if over the fail count and not init
Signed-off-by: dirksavage88 <dirksavage88@gmail.com>
---------
Signed-off-by: dirksavage88 <dirksavage88@gmail.com>
* Added AUAV absolute pressure sensing
* Moved func to abstract base class
* Probe and params
* Fixed arg parsing and added auto start
* refactorings
* Added sample perf
* Fixed CI findings
* Simplified rc.sensors condition
I could not extract the open_drone_id helpers to a separate lib because
it would require the mavlink headers while the mavlink library would
also depend on it, so it ended up being a circular dependency.
Instead, I'm now just using the headers from within the mavlink module
as well as from the uavcan driver.
This will send the System message if it is already being sent by a ground
station. Otherwise, it will assemble the message itself using the
takeoff/home location.
As the sensor can directly report the amount of samples in the fifo, use it to simplify the logic.
Also combine the fifo empty/fifo overflow checks for interrupt and polling modes.
Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>
If DRDY signal is used, the interrupt status needs to be cleared at FIFO reset
in order to make DRDY go back inactive. Otherwise there won't be a falling edge
interrupt at the next sample.
Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>
Silvan Fuhrer