fly316/PX4-Autopilot
7
0
Fork 0
mirror of https://gitee.com/mirrors_PX4/PX4-Autopilot.git synced 2026-10-21 07:43:35 +08:00
Code Issues Packages Projects Releases Wiki Activity
34,166 Commits 852 Branches 161 Tags
066464c4e8be4d5fed23afc84def2fa40d5cd3bb
Commit Graph
123 Commits
Author SHA1 Message Date
Daniel Agar 1ec10bfcc6 boards: disable CONFIG_ARMV7M_LAZYFPU again (#16573) 
- this was causing hard faults on the CUAV Nora and possibly other boards, disabling everywhere until we fully understand the root cause
 2021-01-17 22:40:21 -05:00
Daniel Agar cb74cb8692 boards: enable CONFIG_ARMV7M_LAZYFPU everywhere 2021-01-12 09:04:38 +01:00
Matthias Grob 7545249215 Add flight_mode_manager to all targets with mc_pos_control 2020-12-30 10:25:08 -05:00
David Sidrane 22bc176885 Added mft for queries 2020-12-02 20:40:23 -05:00
David Sidrane 65b3b0b2e7 nxp_fmuk66-v3: Use px4_platform_configure 2020-12-02 20:40:23 -05:00
David Sidrane defa437b88 Add HY-SRF05 ultrasonic sensor driver 
* nxp_fmuk66-e: Use srf05 distance sensor
 * nxp_fmuk66-v3: Use srf05 distance sensor
 2020-11-08 13:25:58 -05:00
Daniel Agar 233949a377 NuttX upgrade to 10.0.0+ defconfig changes 2020-10-28 14:25:25 -04:00
Tanja Baumann b5ebdb8e41 add system command to get and set system time 
* add system_time command for all boards
 2020-09-26 13:09:01 -04:00
David Sidrane a7365100f4 nxp_fmuk66-v3: Updates for NuttX 9.1.0+ External schedule_note 2020-09-16 21:32:04 -04:00
David Sidrane 1936ead0b4 nxp_fmuk66-v3: Updates for NuttX 9.1.0+ External schedule_note 2020-09-16 21:32:04 -04:00
David Sidrane 8a673c8a3d nxp_fmuk66-v3 Updates for NuttX 9.1.0- 
nxp_fmuk66-v3: defconfig MMCSD enable multiblock

nxp_fmuk66-v1:Disable multiblock as it fails
 2020-09-16 21:32:04 -04:00
Peter van der Perk 0caad08dd5 Added RTPS target for FMUK66-V3 2020-09-16 09:42:34 -04:00
SalimTerryLi c037dbef21 Rename and move src/drivers/adc to src/drivers/adc/board_adc 2020-09-07 23:09:20 -04:00
David Sidrane 5d5a767143 npx_fmuk66:CONFIG_BOARD_CRASHDUMP is not supported 2020-09-03 14:55:09 +02:00
Daniel Agar 2c3441aa90 boards: reduce CONFIG_NFILE_DESCRIPTORS 15 -> 12 
- reduced now that calibration uses uORB::Subscription
 - can likely be reduced further (perhaps < 8) with additional testing
 2020-08-21 10:12:13 -04:00
Daniel Agar e3d31a881e boards: NuttX disable posix message queues 2020-07-17 17:00:21 -04:00
Jari van Ewijk fe7fcb101f NXP FMUK66 - Fix VDD_3V3_SENSORS_EN polarity 2020-06-29 07:45:47 -07:00
David Sidrane df73662d66 nxp_fmuk66-v3:Add Full networking support 2020-06-22 18:43:03 -04:00
Daniel Agar 6f6efd60b7 boards: centralize optional external I2C sensor start 
- configured with new parameter SENS_EXT_I2C_PRB
 2020-06-10 09:04:13 -04:00
Daniel Agar 5507c15bdc boards: move rgbled_pwm startup to appropriate boards 2020-06-08 16:49:46 -04:00
Daniel Agar 746a8f5cf9 commander: reboot/shutdown usability fixes 
- always check with state machine before reboot/shutdown
 - respect BOARD_HAS_POWER_CONTROL (shutdown from command, low battery, power button)
 - px4_shutdown_request add optional delay and always execute from HPWORK
 - px4_shutdown_request split out px4_reboot_request
 2020-05-06 13:53:54 -04:00
Daniel Agar 28d2aca699 boards: include all procfs entries on boards that aren't flash constrained 2020-05-01 20:59:57 -04:00
Daniel Agar 8d0c92003a boards: remove all CONFIG_NXFONTS_DISABLE* 2020-05-01 20:59:57 -04:00
Daniel Agar 76cfd8fa39 boards: add nxp fmuk66-v3 and rddrone-uavcan146 socketcan builds 2020-04-30 15:04:08 -04:00
Daniel Agar 06478d9997 delete obsolete SENSORIOCSPOLLRATE/SENSORIOCRESET and systemcmds/config 2020-04-15 23:33:41 -04:00
mcsauder 6548fde024 Whitespace cleanup to quiet new blank line at EOF git hook. 2020-04-15 23:00:39 -04:00
Daniel Agar 66eacd24bc px4_fmu-v5_stackcheck: update stack sizes and add to Jenkins 
- increase stack sizes to run cleanly under stackcheck
     - this is likely overkill for most boards, but using stackcheck to set our minimum ensures we have a very safe margin on regular builds and it's something we can currently afford
 - remove holybro_durandal-v1_stackcheck from test rack (there's only one unit)
 2020-04-11 21:16:10 -04:00
Daniel Agar 7aa7f0ed95 switch remaining boards to new InvenSense IMU drivers 2020-04-07 09:59:12 -04:00
Daniel Agar ad559a66a1 examples: add simple work_item example module 2020-04-06 09:43:55 -04:00
Daniel Agar 40b1043e12 NuttX boards minor lpwork and init stack increases 2020-04-02 23:39:17 -04:00
Daniel Agar 15332a7e56 boards: reduce CONFIG_NFILE_DESCRIPTORS 20 -> 15 2020-04-01 16:17:14 -04:00
Daniel Agar ca81175b07 rename drivers/px4fmu -> drivers/pwm_out 
- split out header
 2020-03-31 19:12:31 -04:00
Daniel Agar 44bec269b0 boards: update all NuttX configs CONFIG_NSH_MAXARGUMENTS 12 -> 15 2020-03-25 17:59:22 -04:00
Beat Küng 7ea8dff8db spi: do not deselect other chip-selects 
And make sure on reset & init everything is deselected.

Reduces CPU load on a pixhawk cube by almost 1%.
 2020-03-24 09:46:20 -04:00
Beat Küng 6a41c9e417 refactor fxos8701cq: use driver base class 2020-03-24 09:46:20 -04:00
Beat Küng 5fa4cd1019 refactor fxas21002c: use driver base class 2020-03-24 09:46:20 -04:00
Beat Küng b156fe5787 boards: remove deprecated SPI + I2C defines from board_config.h 
chip-selects are deselected in stm32_spiinitialize()
 2020-03-24 09:46:20 -04:00
Beat Küng f74474dd55 fmuk66-v3: fix spi bus numbering passing to px4_spibus_initialize 
Fixes an error on bootup ([boot] FAILED to initialize SPI port 0). Other
than that, everything was working.
 2020-03-24 09:46:20 -04:00
Daniel Agar 8738c26426 boards: enable NuttX SPI DMA buffers 
- update to NuttX with stm32f4 and stm32f7 SPI DMA internal buffers
 - remove explicit DMA buffer allocations from new IMU drivers
 - restore original BOARD_DMA_ALLOC_POOL_SIZE
 - decrease SPI DMA thresholds based on fmu-v2/v3/v4/v5 bench testing
 2020-03-22 19:24:26 -04:00
Beat Küng 8ebde51648 refactor hmc5883: use driver base class 
Removes the calibration on startup, as these values were overwritten by
the system calibration values anyway.
So the only difference is that if all calibration scales were equal to 1,
the driver startup would have failed.
 2020-03-17 23:31:17 -04:00
Beat Küng 47b329cc54 refactor bmm150: use driver base class 2020-03-17 23:31:17 -04:00
Beat Küng aeadf54a74 refactor bmp280: use driver base class 2020-03-17 23:31:17 -04:00
Beat Küng be0a205438 refactor ist8310: use driver base class 2020-03-17 23:31:17 -04:00
Daniel Agarandbresch f9794e99f8 move hover_thrust_estimator to new module (mc_hover_thrust_estimator) 
* MC_HTE: unitialize with hover_thrust parameter
* MC_HTE: constrain hover thrust setter between 0.1 and 0.9
* MC_HTE: integrate with land detector and velocity controller
* MCHoverThrustEstimator: Always publish an estimate even when not fusing measurements. This is required as the land detector and the position controller need to receive a hover thrust value.

* MC_HTE: use altitude agl threshold to start the estimator
local_position.z is relative to the origin of the EKF while dist_bottom
is above ground

Co-authored-by: bresch <brescianimathieu@gmail.com>
 2020-03-11 21:20:54 -04:00
Daniel Agar 505afc6063 boards: increase LPWORKSTACKSIZE 1536 -> 1600 2020-03-10 12:53:01 -04:00
Beat Küng 335623e11d SPI config: use enum to specify bus 2020-03-10 10:11:43 -04:00
Beat Küng 1851665fab boards: add new spi+i2c config 
Chip-select and SPI initialization uses the new config, whereas the drivers
still use the existing defines.

The configuration in board_config.h can be removed after all drivers are
updated.
 2020-03-10 10:11:43 -04:00
Daniel Agar 4698a09b98 delete unmaintained outback challenge (OBC) bottle drop example 2020-03-05 14:09:31 -05:00
Beat Küng d74d094940 nuttx configs: disable nuttx timers which are used for PWM output 
These are not required, and to be consistent we enforce disabling them now.
 2020-02-13 03:49:16 -08:00
Beat Küng c01f6811d0 nxp/fmuk66-v3: use hw description methods for timer configuration 2020-02-13 03:49:16 -08:00