fly316/PX4-Autopilot
7
0
Fork 0
mirror of https://gitee.com/mirrors_PX4/PX4-Autopilot.git synced 2026-07-14 04:50:36 +08:00
Code Issues Packages Projects Releases Wiki Activity
39,950 Commits 852 Branches 161 Tags
pr-rc_input_blocking
Commit Graph

790 Commits

Author SHA1 Message Date
Oleg Kalachev 21b78f9d05 Enable mpu9250’s magnetometer on fmu-v4 2022-02-08 13:18:39 -05:00
Julian Oes 490a0c473b Rename vmount to gimbal 2022-02-07 19:21:15 -05:00
Jukka Laitinen f8a090e85e Remove HYGROMETERS from fmu-v5 stackcheck build and rename to COMMON_HYGROMETERS 
The stackcheck build flash space overflows after adding hygrometers.

Also follow the naming convention of other similar config flags, and rename the
config.

Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>
 2022-02-01 08:56:25 -05:00
Roman Dvořák ed475ca324 SHT3x driver 
SHT3x driver, clean code
changes leading to merge TFHT with CUAV hygrometer
Delete humidity_temperature.msg
Update CMakeLists.txt
rename 'atmosphefir_quantities' to 'hygrometers'
fix logging
removed cmake files
fix PR issues
 2022-01-31 21:38:26 -05:00
Jukka Laitinen 1f9ace3901 boards/px4/fmu-v5: Add linker scripts for kernel-userspace split 
These scripts are used in protected build configuration

Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>
 2022-01-31 20:26:08 -05:00
Jukka Laitinen 03c0a2d56c Fix some cmake / linker depenencies for boards 
Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>
 2022-01-27 12:42:40 -05:00
Jukka Laitinen 700c13cdff Remove linking of arch_io_pins into drivers_board 
This goes the other way around; arch_io_pins is using the pin
definitions from drivers_board, so the drivers_board needs to be linked
into arch_io_pins

Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>
 2022-01-27 12:42:40 -05:00
Beat Küng 92769bd2b2 dshot: remove BOARD_DSHOT_MOTOR_ASSIGNMENT & handle timer channel gaps 2022-01-21 20:41:15 -05:00
Daniel Agar d077ca15fb delete PWM_SERVO_SET, PWM_SERVO_SET_MODE, systemcmds/motor_ramp, and pwm_out test 2022-01-10 09:51:11 -05:00
Daniel Agar df44df2df6 delete systemcmds/esc_calib 
- this is redundant with commander esc_calibration
 2022-01-10 09:51:11 -05:00
Daniel Agar daa925137c boards: move default battery calibration defines to parameter defaults 2022-01-10 09:49:36 -05:00
Julian Oes 9eda5b373c posix: add fuzz testing using MAVLink messages 
This adds the env option PX4_FUZZ which runs the LLVM libFuzzer which
throws random bytes at mavlink_receiver using MAVLink messages over UDP.

The MAVLink messages that are being sent are valid, so the CRC is
calculated but the payload and msgid, etc. are generally garbage, unless
the fuzzing gets a msgid right by chance.

As I understand it, libFuzzer watches the test coverage and will try to
execute as much of the code as possible.
 2022-01-07 10:17:12 -05:00
Daniel Agar e835a7c4ea boards: enable readline history and tab completion on newer boards 2022-01-03 10:44:32 -05:00
Daniel Agar f76aa0e772 cmake: NuttX ARMV7M_STACKCHECK skip ekf2 
- px4_fmu-v5_stackcheck switch from icm20689 -> bmi055 (lower rate)
 - this is to make performance tolerable
 2022-01-01 18:43:27 -05:00
Daniel Agar 77b65ee564 boards: px4_fmu-v5_debug disable stack check 
- this is redundant with px4_fmu-v5_stackcheck
 2021-12-31 19:34:18 -05:00
Daniel Agar 6d0339ba0c I2CSPIDriverBase: sensor start failure ERROR if internal, WARN if external 2021-12-28 11:05:35 -05:00
Daniel Agar 990d7c159d pwm_out: cleanup and prep for linux compatibility 2021-12-28 11:04:00 -05:00
Daniel Agar 98d706772e boards: px4_fmu-v2_rover disable events module to save flash 2021-12-24 20:06:13 -05:00
Beat Küng 9bc9169b77 px4/fmu-v5x: add missing board variants to rc.board_mavlink 2021-12-24 20:06:13 -05:00
Beat Küng 6c8f322dfe px4/fmu-v2/test: disable modules to reduce flash 2021-12-24 20:06:13 -05:00
Beat Küng 8743b78474 px4/fmu-v2/rover: disable modules to reduce flash 2021-12-24 20:06:13 -05:00
Julian Oes 9686c81f7d boards: enable flow control on CDCACM 
This enables flow control on CDCACM for the NuttX boards which fixes a
problem where HITL would stall.

The stall could happen if the hardware would be a bit too slow in
keeping up with the incoming messages. Often, this happened on arming
because the logger would take some time to log all parameters right at
the beginning.

The stall would then not recover due to NuttX bug where the rx interrupt
would not be restored correctly and instead only a slower watchdog would
release the next read. This watchdog takes 200ms which means it's hard
to impossible to get out of the situation without restarting sim and/or
PX4.  For more information about the issue, see:
apache/incubator-nuttx#3633

As a workaround, until that bug is fixed, and because it makes sense
anyway, I propose to enable FLOWCONTROL for the serial via USB.
 2021-12-21 08:01:38 +01:00
Beat Küng 87ec8839c4 px4/fmu-v5x: remove unused base_phy_DP83848C build variant 2021-12-10 09:03:08 -05:00
Beat Küng ca6df035b4 px4/fmu-v5x: add arch_io_pins dependency (required in init.cpp) 2021-12-10 09:03:08 -05:00
Daniel Agar 8185e2a384 boards: board_app_initialize() don't return early on failure 
- depending on the situation we're more likely to get actionable user
feedback by allowing boot to complete rather than silently failing
 2021-12-09 20:41:54 -05:00
Cindy Hsieh ca90c785e9 correct pin in the comment, no code changed 2021-12-09 20:40:34 -05:00
Daniel Agar 3160e7a3cd Jenkins: run calib_udelay on test rack 2021-12-05 19:42:10 -05:00
Daniel Agar 713350930d boards: px4_fmu-v5 add test variant 2021-12-05 18:08:54 -05:00
Daniel Agar a2064cceff boards: enable early MPU reset on any board potentially not using the PX4 bootloader 2021-12-01 20:13:41 -05:00
Peter van der Perk 36ba8cc6dd UAVCANv1 update FMU-V5 config 2021-12-01 09:29:15 -05:00
David Sidrane df1c94dd4e px4_fmu-v5_debug:Increase stack size 2021-11-29 16:01:08 -05:00
Jukka Laitinen c2cbab1e98 Improve stub_keystore configuration 
It is possible to either set the keyfile locations in board configuration or
with the same environment variables as before.

Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>
 2021-11-29 11:09:51 -05:00
Daniel Agar 9b7c8c8a8b boards: px4_fmu-v6x_default enable ethernet by default with NuttX optimizations 2021-11-29 09:08:42 -05:00
Daniel Agar b9152dc4d0 boards: px4_fmu-v5x_default increase ETH pktsize to max and enable tcp delayed ack 2021-11-29 09:08:42 -05:00
Daniel Agar 0459b73520 boards: px4_fmu-v5x enable mavlink ethernet by default 2021-11-29 09:08:42 -05:00
David Sidrane 23c73d4e0b px4_fmu-v6x nsh:Remove CONFIG_RAMTRON_WRITEWAIT 2021-11-26 19:27:29 -05:00
David Sidrane 51b55533af px4_fmu-v6u nsh:Remove CONFIG_RAMTRON_WRITEWAIT 2021-11-26 19:27:29 -05:00
David Sidrane b8bdf7e1c4 px4_fmu-v5x nsh:Remove CONFIG_RAMTRON_WRITEWAIT 2021-11-26 19:27:29 -05:00
David Sidrane 3504541ebd px4_fmu-v5x base_phy_DP83848C:Remove CONFIG_RAMTRON_WRITEWAIT 2021-11-26 19:27:29 -05:00
David Sidrane 60229c28a8 px4_fmu-v5 uavcanv1:Remove CONFIG_RAMTRON_WRITEWAIT 2021-11-26 19:27:29 -05:00
David Sidrane 01681d6b47 px4_fmu-v5 stackcheck:Remove CONFIG_RAMTRON_WRITEWAIT 2021-11-26 19:27:29 -05:00
David Sidrane 32c2160137 px4_fmu-v5 nsh:Remove CONFIG_RAMTRON_WRITEWAIT 2021-11-26 19:27:29 -05:00
David Sidrane cf36435ed3 px4_fmu-v5 debug:Remove CONFIG_RAMTRON_WRITEWAIT 2021-11-26 19:27:29 -05:00
David Sidrane a6bc41ef75 px4_fmu-v5 cryptotest:Remove CONFIG_RAMTRON_WRITEWAIT 2021-11-26 19:27:29 -05:00
David Sidrane 0951b9b1e7 px4_fmu-v4pro nsh:Remove CONFIG_RAMTRON_WRITEWAIT 2021-11-26 19:27:29 -05:00
David Sidrane e957ebac56 px4_fmu-v4 nsh:Remove CONFIG_RAMTRON_WRITEWAIT 2021-11-26 19:27:29 -05:00
David Sidrane c3ae713ec1 px4_fmu-v3 nsh:Remove CONFIG_RAMTRON_WRITEWAIT 2021-11-26 19:27:29 -05:00
David Sidrane 394b431364 px4_fmu-v2 nsh:Remove CONFIG_RAMTRON_WRITEWAIT 2021-11-26 19:27:29 -05:00
David Sidrane 228a0ac5ed px4_fmu-v6u:Set CONFIG_MKFATFS_BUFFER_ALIGMENT=32 2021-11-24 09:46:23 -05:00
David Sidrane 3f67ece322 px4_fmu-v5:Set CONFIG_MKFATFS_BUFFER_ALIGMENT=32 2021-11-24 09:46:23 -05:00