4a14a8bc7f
AutoLineSV: Always publish a valid yaw setpoint
...
In MPC_YAW_MODE 3 (along trajectory), the flight task is asked to
produce a yaw setpoint. If the previous yaw value was NAN (e.g.: during
early takeoff), the setpoint should then be reset to the current
estimate.
2021-11-16 18:09:37 -05:00
f751dd2242
FlightTask: set yaw_setpoint to NAN when yaw should not be controlled
2021-11-16 18:09:37 -05:00
2213343240
ft altitude: use longerThan to save a sqrt operation
2021-11-16 18:09:37 -05:00
394fa953b8
EKF: get status on yaw alignement in flight
...
1s after the in air mag reset is performed, the final yaw alignment is
complete and the yaw estimate can be used for yaw control.
2021-11-16 18:09:37 -05:00
2a5751233a
FlightTasks: remove unused StraightLine library
...
It was meant as an example for an easy to use interface of a
motion primitive with a minimal implementation. But the implementation
is much worse than the jerk optimized trajectory. We rather
work on making it easier to use. #18390 was a first step towards that.
2021-11-16 18:08:27 -05:00
e062f4fcf0
mavlink: ORBIT_EXECUTION_STATUS stream limit to 2 instances
2021-11-16 17:10:13 -05:00
7090e634cc
mission_block: always accept yaw in MC takeoff
2021-11-16 12:35:16 -05:00
0622cb8857
mavlink_ftp: disallow writes outside of /fs/microsd under NuttX
...
As these files are kept in RAM, it could just fill up the RAM.
2021-11-16 12:34:16 -05:00
4e8c234a55
ekf2: only save mag declination if changed
2021-11-16 12:33:48 -05:00
96bf3aa5d0
matrix: apply PX4 astyle
2021-11-16 12:30:51 -05:00
ab07f5300b
lib/matrix: delete unused and add testing to PX4
2021-11-16 12:27:14 -05:00
4a3d64f1d7
consume PX4/Matrix repository and preserve history
2021-11-16 12:24:19 -05:00
38516f7e9c
delete matrix submodule
2021-11-16 12:20:57 -05:00
b36dbf8de4
Remove AutoLineSmoothVel, merged into Auto
2021-11-16 10:08:47 +01:00
179b1cdf56
FlightTaskAuto: merge activate(), reActivate() and update() from FlightTaskAutoLineSmoothVel
2021-11-16 10:08:47 +01:00
51ebb0f294
FlightTaskAuto: move in helper methods from FlightTaskAutoLineSmoothVel
2021-11-16 10:08:47 +01:00
aa376c5824
FlightTaskAuto: move in parameters from FlightTaskAutoLineSmoothVel
2021-11-16 10:08:47 +01:00
50e13f132f
FlightTaskAuto: move in members from FlightTaskAutoLineSmoothVel
2021-11-16 10:08:47 +01:00
33e349d71e
FlightTask: remove unused _time
2021-11-16 10:08:47 +01:00
bfcd251a54
Update submodule mavlink to latest Tue Nov 16 00:39:28 UTC 2021
...
- mavlink in PX4/Firmware (2615146a0770ea416aa24dce70bd61845e45b939): https://github.com/mavlink/mavlink/commit/0a728aa8dcea5023b26d0df9f25ba5b2a14a71cd
- mavlink current upstream: https://github.com/mavlink/mavlink/commit/c3a4b52eb1ac6e8053d64a6a8b6ade887d4fa2d2
- Changes: https://github.com/mavlink/mavlink/compare/0a728aa8dcea5023b26d0df9f25ba5b2a14a71cd...c3a4b52eb1ac6e8053d64a6a8b6ade887d4fa2d2
c3a4b52e 2021-11-14 olliw42 - use [value:] invalid attribute style (#1742 )
5f353d79 2021-11-15 Hamish Willee - fix invalid attribute for arrays where first element sets as invalid (#1740 )
b354af1c 2021-11-11 Beat Küng - add actuator test and configuration commands (#1738 )
a8401492 2021-11-11 Beat Küng - Component information: add actuators (#1729 )
2021-11-15 23:13:02 -05:00
f5d9b01f5c
NuttX build in place
...
- cmake NuttX build wrapper compile in place instead of copying source tree to build directory
- slightly faster skipping necessary copying (depending on system)
- allows debugging in place
- easier to work directly in NuttX following official documentation
- simplifies overall build which should make it easier to resolve any remaining NuttX dependency issues in the build system
- the downside is switching back and forth between different builds always require rebuilding NuttX, but I think this is worth the improved developer experience
- also no longer builds px4io and bootloader in every single build, for most users these rarely change and we're wasting a lot of build time
2021-11-15 18:47:38 -05:00
7b7b7acd36
i2c_spi_buses: respect CONFIG_I2C and CONFIG_SPI
...
- bmp280, dps310, and ms5611 barometers support boards without I2C
2021-11-15 15:57:33 -05:00
eade2915c1
cleanup old parameter translation
2021-11-15 10:01:22 -05:00
91c48606ee
battery_status: clearly define and handle zero remaining flight time
2021-11-15 15:44:02 +01:00
73287e8e8c
battery: compute remaining flight time
2021-11-15 15:44:02 +01:00
54f2e91775
battery_status: report remaining flight time in seconds
...
This allows more accurate reporting and is compliant with the
MAVLink interface.
2021-11-15 15:44:02 +01:00
4ba84d56c9
logger: introduce optional topics
...
The current practice of adding topics to the default set isn't scalable,
as it affects all setups.
By making sure topics are advertised on init, logger can just discard
topics that don't exist. This does not work for all topics, so topics are
specifically marked as optional. It can be extended to more topics later
on though.
This reduces the list of topics by ~35 on a pixracer configured as quad,
and reduces RAM usage by ~1KB.
2021-11-15 09:02:03 -05:00
177fe4bade
logger: log write file allow single retry on write failure
2021-11-13 20:32:29 +01:00
333629ce37
Update Broadcom AFBR to v1.3.5 API
2021-11-13 12:05:08 -05:00
439400f76e
commander: don't ack gimbal commands
...
- this leads to an unnecessary amount of acks which can in turn overflow
the orb queue
Signed-off-by: RomanBapst <bapstroman@gmail.com >
2021-11-13 11:59:28 -05:00
3cb286abc8
gyro_calibration: reset on any sensor timeout
2021-11-13 10:15:25 -05:00
29b9e46664
mavlink_tests: add correct mavlink_c_generate dependency
2021-11-12 13:43:32 -05:00
17ad7071c3
fix the quaternion normalization issue
...
Be course of the numerical computing error . The normalization of the quaternion can't always equal to 1 precisely. It could occasionally trigger the error"attitude estimate no longer valid". So enlarge the threshold to 1e-6f. That keeps it silence.
2021-11-12 16:31:40 +01:00
0ec3f0d2cb
mathlib: LowPassFilter2p update cutoff freq min to match NotchFilter
...
- numerically the cutoff frequency not being smaller than 1% of the
sample frequency is probably a better choice, but we're mostly filtering
16 bit data now stored in 32 bit float
2021-11-11 11:17:15 -05:00
0d171384b3
update IMU_GYRO_DNF_BW default 8->15 Hz
...
- dshot telemetry feedback can be quite slow (~2 Hz), so I think a
larger default value here makes sense
2021-11-11 11:17:15 -05:00
452f15e985
IMU_GYRO_DNF_EN remove from developer category
2021-11-11 11:17:15 -05:00
0e2ecdc59a
sensors/vehicle_angular_velocity: perf counter naming consistentcy
2021-11-11 11:17:15 -05:00
c60a9e2981
sensors/vehicle_angular_velocity: avoid unnecessary ESC notch filter resets
2021-11-11 11:17:15 -05:00
78436e706c
mathlib: NotchFilter add optimized parameter update if only notch frequency changes
2021-11-11 11:17:15 -05:00
edce30c6de
sensors/vehicle_angular_velocity: fix ESC RPM notch filter update
2021-11-11 11:17:15 -05:00
376b72fb2f
sensors/vehicle_angular_velocity: add new parameter for ESC RPM notch filter BW
2021-11-11 11:17:15 -05:00
02709fcfab
Fixes for MPU6000 and MatekH743-slim board
...
- MPU6000: Added 10us delay for R/W of slow registers
- Board: Fixed DRDY pin from PB1 to PB2
2021-11-11 08:40:41 -05:00
fdf8461452
ver: print PX4_BOARD_LABEL for 'ver all'
2021-11-11 08:38:42 -05:00
dbacdedad1
Remove FlightTaskAutoMapper, merged into AutoLineSmoothVel
2021-11-11 09:14:49 +01:00
a94c61b896
FlightTaskAutoMapper: move parameters into FlightTaskAutoLineSmooth
2021-11-11 09:14:49 +01:00
59a395f6a0
FlightTaskAutoMapper: move remaining members into FlightTaskAutoLineSmooth
2021-11-11 09:14:49 +01:00
f5183348a6
FlightTaskAutoMapper: move remaining methods into FlightTaskAutoLineSmooth
2021-11-11 09:14:49 +01:00
0211ef3ba1
FlightTaskAutoMapper: move update() into FlightTaskAutoLineSmooth
2021-11-11 09:14:49 +01:00
1cef2ad196
FlightTaskAutoMapper: merge activate() into FlightTaskAutoLineSmooth
2021-11-11 09:14:49 +01:00
e9d50b853a
Adding MAVLink message stream of GPS_RTCM_DATA
2021-11-10 21:15:01 -05:00
bresch