* Port of the PX4 Vision gazebo-classic model to Gazebo. With Gazebo Garden, everything seems functionnal.
* Port of the PX4 Vision gazebo-classic model to Gazebo.
With Gazebo Garden, everything seems functionnal.
* Added airframe for command make px4_sitl gz_px4vision
* revert author field
* Import model from Ignition Fuel instead of defining it directly in the .sdf
- multi-instances support is removed from the parameter definitions.
- XRCE_DDS_AG_IP allows to define the agent IP when udp transport is used.
The parameter is used by default if the module is started without the -h argument.
- XRCE_DDS_PRT allows to define the agent listning udp port when the
udp transport is uded. The parameter is used by default if the module is started
without the -p argument.
- Tools/convert_ip.py assists in converting ips in decimal dot notation into int32
notation.
Signed-off-by: Beniamino Pozzan <beniamino.pozzan@phd.unipd.it>
The attitude frame is wrong for tailsitters doing side slip fusion for wind estimation.
It doesn't take into account that the frames is 90deg tilted in FW flight.
Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
- use `gazebo-classic` everywhere consistently referring to the original Gazebo (eg version 9,10,11)
- additional `gazebo_*` helper targets added for compatibility, but warn about deprecation and tell you the new target naming
- use `gz` everywhere when referring to Gazebo (aka Ignition Gazebo or new Gazebo)
Multiple agents can connect to the same client
For sitl builds, if the intance number is different from zero,
XRCE_DDS_KEY is set to the instance number and
the microdds_client is automatically started
with namespace
px4_"instance_number"
and udp port 8888
If the instance number is equal to zero
XRCE_DDS_KEY is left untouched and
the microdds_client is automatically started
without namespace
and udp port 8888
Signed-off-by: Beniamino Pozzan <beniamino.pozzan@phd.unipd.it>
The partecipant name is modified into
"client_namespace"/px4_micro_xrce_dds
For sitl builds the microdds_client is automatically started
with namespace
px4_"instance_number"
and udp port
8888+"intance_number"
Signed-off-by: Beniamino Pozzan <beniamino.pozzan@phd.unipd.it>
landing airspeed was previously defined by a scale factor multiplied by minimum airspeed. this commit changes this parameter to an explicit speed, and when unspecified, defaults to the minimum airspeed
MIS_LTRMIN_ALt was used to limit the go-to altitude of a LOITER_TO_ALT (not the exit altitude,
but the altitude that the vehicle went to to fly to WP), and during landing abort to climb to
at least this altitude. The min entry altitude of LOITER_TO_ALT I remove with this commit, while
for the min alt during abort I added the new parameter MIS_LND_ABRT_ALT.
Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
* Enable motor controls for fixed wing mode in tailsitters
This commit enable motor controls in fixed wing mode for tailsitters
This is needed for enabling quad tailsitters
* VTOL: differential thrust in FW: adapt params to be generic for all axes
Until now only suppoted on yaw axis. Not to be supported also on Roll and Pitch.
- VT_FW_DIFTHR_EN: make bitmask for all three axes independently. First bit is Yaw,
sucht that existing meaning of VT_FW_DIFTHR_EN doesn't change.
- VT_FW_DIFTHR_SC: rename to VT_FW_DIFTHR_S_Y and add same params for roll (_R) and
pitch (_P).
Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
* Integrate differential control bits to three axis control
Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
- update all msgs to be directly compatible with ROS2
- microdds_client improvements
- timesync
- reduced code size
- add to most default builds if we can afford it
- lots of other little changes
- purge fastrtps (I tried to save this multiple times, but kept hitting roadblocks)
TheotimeBlg