David Riseborough a32333994f The single line UART setup was replaced with a locked down configuration. ...

As per issue #9428, this code change locks down the termios configuration
for the UART to non-canonical, binary tx/rx, 8 bits, 1 stop bit, no parity.

2018-05-11 17:11:40 +02:00

..

ros

…

templates

The single line UART setup was replaced with a locked down configuration.

2018-05-11 17:11:40 +02:00

tools

Update submodule genmsg to latest Fri May 4 20:26:30 CDT 2018 (#9416)

2018-05-05 16:48:09 -04:00

actuator_armed.msg

mavlink: implement MAV_CMD_REQUEST_FLIGHT_INFORMATION

2017-08-31 09:26:39 +02:00

actuator_controls.msg

…

actuator_direct.msg

…

actuator_outputs.msg

…

adc_report.msg

PX4 System:Expunge the nuttx adc structure from the system

2017-07-17 22:28:29 +02:00

airspeed.msg

preflight check airspeed use differential_pressure

2017-07-08 21:54:04 +02:00

att_pos_mocap.msg

…

battery_status.msg

Updated batt_smbus. Expanded battery_status.msg. Fixed mavlink_messages.cpp temperature. (#8991)

2018-03-06 10:42:20 +01:00

camera_capture.msg

msg : add camera feedback message

2017-05-12 22:11:17 +02:00

camera_trigger.msg

camera_trigger : completely refactor state handling

2017-05-12 22:11:17 +02:00

CMakeLists.txt

mavlink : add advanced timesync algorithm

2018-05-03 09:59:16 +02:00

collision_report.msg

…

commander_state.msg

msgs : add support for precision landing

2018-01-15 10:27:23 +01:00

cpuload.msg

…

debug_key_value.msg

Use char* for names of debug messages

2017-08-30 14:45:02 +01:00

debug_value.msg

Wrong indentation

2017-08-30 14:45:02 +01:00

debug_vect.msg

Use char* for names of debug messages

2017-08-30 14:45:02 +01:00

differential_pressure.msg

multi diff pres sensor publication and logging

2017-08-19 22:49:29 +02:00

distance_sensor.msg

add constants for distance orientation convention

2017-09-25 08:52:21 +02:00

ekf2_innovations.msg

msgs : add support for precision landing

2018-01-15 10:27:23 +01:00

ekf2_timestamps.msg

EKF2 and replay add all consumed messages to ekf2_timestamps and refactor

2018-04-11 23:26:58 -04:00

esc_report.msg

…

esc_status.msg

…

estimator_status.msg

ekf2: added beta test ratio to estimator_status

2018-01-02 22:36:42 +01:00

follow_target.msg

…

fw_pos_ctrl_status.msg

…

geofence_result.msg

mission require valid landing after DO_LAND_START

2017-04-20 14:41:01 -04:00

gps_dump.msg

…

gps_inject_data.msg

…

home_position.msg

home_position delete unused direction_{x, y, z}

2017-12-20 10:19:07 +01:00

input_rc.msg

…

irlock_report.msg

msgs : add support for precision landing

2018-01-15 10:27:23 +01:00

landing_target_innovations.msg

msgs : add support for precision landing

2018-01-15 10:27:23 +01:00

landing_target_pose.msg

msgs : add support for precision landing

2018-01-15 10:27:23 +01:00

led_control.msg

libled: allow infinite flashing mode

2018-01-19 11:55:39 +01:00

log_message.msg

…

manual_control_setpoint.msg

Switch assignment: added manual and stabilized switch for a default stabilized switch scheme, let FW go into Acro

2017-02-18 08:03:19 +01:00

mavlink_log.msg

…

mission_result.msg

fix MISSION_ITEM REACHED message broadcast (#8332)

2017-12-10 02:30:58 -05:00

mission.msg

Mission merge offboard + onboard and simplify

2018-01-14 12:53:53 +01:00

mount_orientation.msg

…

multirotor_motor_limits.msg

multirotor_motor_limits only publish for MC

2017-09-19 02:25:30 +01:00

obstacle_distance.msg

add obstacle_distance message

2018-02-16 19:59:31 +01:00

offboard_control_mode.msg

…

optical_flow.msg

…

parameter_update.msg

Param interface: Publish instance count

2018-01-08 09:27:22 +01:00

position_setpoint_triplet.msg

uORB combine VTOL FW and MC virtual topics (#7008)

2017-04-09 13:17:20 -04:00

position_setpoint.msg

navigator move parameters out of MissionBlock

2017-10-26 22:43:53 +02:00

power_button_state.msg

fix power button shutdown: use an orb topic instead of a work queue call

2017-07-29 23:10:47 +02:00

pwm_input.msg

…

qshell_req.msg

…

rate_ctrl_status.msg

rate controller status include rates

2018-01-29 09:10:56 -05:00

rc_channels.msg

Switch assignment: added manual and stabilized switch for a default stabilized switch scheme, let FW go into Acro

2017-02-18 08:03:19 +01:00

rc_parameter_map.msg

…

safety.msg

Safety: Add field for override inputs

2017-12-02 11:39:52 +00:00

satellite_info.msg

…

sensor_accel.msg

Sensor messages device IDs: These remain unsigned

2017-01-19 19:24:52 +01:00

sensor_baro.msg

move pressure altitude from baros to sensors module

2018-04-11 23:26:58 -04:00

sensor_bias.msg

move baro and magnetometer data out of sensor_combined

2018-04-11 23:26:58 -04:00

sensor_combined.msg

move baro and magnetometer data out of sensor_combined

2018-04-11 23:26:58 -04:00

sensor_correction.msg

msg: Add mapping from uORB index to compensation parameter index

2017-02-01 08:40:23 +01:00

sensor_gyro.msg

Sensor messages device IDs: These remain unsigned

2017-01-19 19:24:52 +01:00

sensor_mag.msg

vehicle_command commands are uint16, not uint32

2017-09-08 09:06:30 +02:00

sensor_preflight.msg

msg: publish magnetometer inconsistency level

2017-10-05 09:30:26 -07:00

sensor_selection.msg

msg: create uORB topic for sensor selection data

2017-05-03 08:37:14 +02:00

servorail_status.msg

…

subsystem_info.msg

…

system_power.msg

Fixed typo usb_vaild -> usb_valid

2017-09-29 10:46:50 -10:00

task_stack_info.msg

load_mon: rename low_stack -> task_stack_info & always publish it

2017-02-04 12:15:59 +01:00

tecs_status.msg

TECS: Use version in ECL library

2017-10-22 21:56:06 +02:00

telemetry_status.msg

…

test_motor.msg

…

timesync_status.msg

mavlink : add advanced timesync algorithm

2018-05-03 09:59:16 +02:00

transponder_report.msg

Don't use ADSB messages with undefined fields in navigator (#8900)

2018-02-18 11:08:40 +01:00

tune_control.msg

tune_control: update comment

2018-03-19 14:15:52 +01:00

uavcan_parameter_request.msg

…

uavcan_parameter_value.msg

…

ulog_stream_ack.msg

…

ulog_stream.msg

…

vehicle_air_data.msg

move baro and magnetometer data out of sensor_combined

2018-04-11 23:26:58 -04:00

vehicle_attitude_setpoint.msg

mc_pos_control: multiple small fixes in position controller we acumulated over time during our PX4 deployment and want to contribute back

2017-10-09 10:20:29 +02:00

vehicle_attitude.msg

delete control_state and cleanup vehicle_attitude (#7882)

2017-09-21 16:24:53 -04:00

vehicle_command_ack.msg

vehicle_command commands are uint16, not uint32

2017-09-08 09:06:30 +02:00

vehicle_command.msg

Adopt high latency switching to new MAV_CMD design

2018-04-11 15:15:28 +02:00

vehicle_control_mode.msg

Vehicle control state: Add support for global yaw

2017-02-22 09:21:20 +01:00

vehicle_global_position.msg

move baro and magnetometer data out of sensor_combined

2018-04-11 23:26:58 -04:00

vehicle_gps_position.msg

…

vehicle_land_detected.msg

landdetector: add additional landdetection state

2017-08-01 19:31:34 +02:00

vehicle_local_position_setpoint.msg

FlightTasks: switch field name from thr to thrust + some code spacing

2018-04-05 07:30:12 +02:00

vehicle_local_position.msg

msg: Add estimator required control limits to vehicle_local_positiion

2018-01-29 22:30:34 +01:00

vehicle_magnetometer.msg

move baro and magnetometer data out of sensor_combined

2018-04-11 23:26:58 -04:00

vehicle_rates_setpoint.msg

uORB combine VTOL FW and MC virtual topics (#7008)

2017-04-09 13:17:20 -04:00

vehicle_roi.msg

fix vehicle_roi.msg: re-add ROI_WPINDEX

2018-03-19 09:42:41 +01:00

vehicle_status_flags.msg

commander status flags delete condition_system_prearm_error_reported

2018-04-16 20:43:33 -04:00

vehicle_status.msg

Fix format and remove ets driver from fmu-v2 build

2018-04-11 15:15:28 +02:00

vtol_vehicle_status.msg

vtol_att avoid unnecessary work and delete unused

2018-01-02 01:35:57 +01:00

wind_estimate.msg

wind estimate msg: added more relevant data

2018-03-21 18:46:58 +01:00