Alex Klimaj 0e6b904e80

LightwareLaser: add SF1XX rotation parameter (#26428) ...

* Add SF1XX rotation parameter and update orientation in LightwareLaser driver

* remove rotation opt arg, update docs about supported lightware

---------

Co-authored-by: Jacob Dahl <dahl.jakejacob@gmail.com>

2026-02-17 10:54:38 -09:00

..

actuators

VOXL_ESC: bringing the driver up to date with ModalAI latest. Includes new open loop "PWM" command handling.

2026-02-09 16:38:53 -07:00

adc

fix: adjusted probe function to new revision of TLA2528 (and add status function)

2026-01-29 18:04:25 +01:00

auterion_autostarter

auterion autostarter: Added autostart for PWM_EXPANDER, generalized c… (#25925)

2026-01-21 19:05:09 +01:00

barometer

MS5837: correct unit conversion to Pascal

2025-11-13 15:52:00 -08:00

batt_smbus

batt_smbus: switch to battery_info.serial_number

2025-06-17 09:05:22 +02:00

bootloaders

drivers: bootloaders: specify UAVCAN only in KConfig (#25947)

2025-11-19 13:58:58 -05:00

camera_capture

Use defines instead of hardcoded magic values for maximum number of output channels and rpm filter time constant

2024-12-19 07:30:25 +01:00

camera_trigger

Use defines instead of hardcoded magic values for maximum number of output channels and rpm filter time constant

2024-12-19 07:30:25 +01:00

cdcacm_autostart

cdcacm_autostart: add low bandwidth profile (#25302)

2025-07-25 09:26:51 -08:00

cyphal

mixer: remove used flag stop_outputs

2025-07-11 08:53:52 -06:00

differential_pressure

drivers: auav, read sensor eeprom to get cal range (#26294)

2026-01-19 15:21:18 +01:00

distance_sensor

LightwareLaser: add SF1XX rotation parameter (#26428)

2026-02-17 10:54:38 -09:00

dshot

DSHOT: fix unit for DSHOT_MIN parameter (#25493)

2025-08-27 09:21:16 -08:00

gnss

msg: GpsDump: queue 8->16 and add device_id (#26091)

2025-12-16 08:36:02 -09:00

gpio

drivers: MCP23009 & MCP23017 shared code base (#25924)

2025-12-17 17:48:30 +01:00

gps

gps: add null check for path in GPS constructor

2026-02-12 21:20:27 -08:00

heater

heater: fix on blips when the heater is off (#25398)

2025-08-11 20:52:53 -04:00

hygrometer

SHT3X driver: change state timer variable from uint32 to uint64. (#24264)

2026-01-31 17:57:39 -09:00

imu

ARK SCH16T driver updated for new Murata modules (#24029)

2025-07-22 23:16:13 -08:00

ins

VectorNav: set global position validity

2025-11-24 12:00:55 +01:00

irlock

…

lights

add rgbled_aw2023 drivers (#25158)

2025-08-03 18:45:41 -08:00

linux_pwm_out

mixer: remove used flag stop_outputs

2025-07-11 08:53:52 -06:00

magnetometer

Improve QMC5883P magnetometer stability by optimizing OSR and ODR settings. (#26350)

2026-01-29 19:38:20 -09:00

optical_flow

drivers/optical_flow/paa3905: fix RegisterRead udelay

2024-04-18 20:57:37 -04:00

osd

msg: AirspeedValidated - uorb topic to standard (#25579)

2025-09-25 11:02:02 +02:00

pca9685_pwm_out

Adds configurable I2C address for PCA9685 PWM driver (#26051)

2025-12-12 09:31:19 -09:00

power_monitor

VOXLPM: Updated driver to publish battery status at 20ms intervals. Changed printf to PX4_INFO.

2026-02-10 11:46:44 -07:00

pps_capture

pps_capture_params: clarify description (#24641)

2025-05-07 11:15:20 +10:00

pwm_input

…

pwm_out

PWM: Add servo center setting & asymetric deflection (#25897)

2025-11-26 18:12:25 +01:00

px4io

fix: correct hex format for CRC output (#25442)

2025-08-18 08:03:44 -08:00

qshell

QuRT logging improvements (#24462)

2025-03-10 18:59:52 -04:00

rc

CRSF_RC: Replace strlcpy with strncpy and null termination. strlcpy is a BSD extension and is not part of standard C/C++. (#26381)

2026-01-29 12:02:36 -09:00

rc_input

Add Altitude Cruise mode

2025-09-18 15:50:10 +02:00

roboclaw

mixer: remove used flag stop_outputs

2025-07-11 08:53:52 -06:00

rpi_rc_in

Fix duplicate newlines at the end of files

2024-07-19 14:33:36 +02:00

rpm

RPM: clean up message

2024-12-19 07:30:25 +01:00

rpm_capture

RPM capture: improve description of param RPM_CAP_ENABLE (#24368)

2025-02-20 09:19:43 +01:00

safety_button

…

smart_battery

batmon: switch to battery_info.serial_number

2025-06-17 09:05:22 +02:00

stub_keystore

…

sw_crypto

…

tap_esc

mixer: remove used flag stop_outputs

2025-07-11 08:53:52 -06:00

tattu_can

BatteryStatus: remove voltage_filtered_a

2024-07-03 16:41:49 +02:00

telemetry

Clean up temperature msg fields (#24272)

2025-02-18 13:23:10 +01:00

temperature_sensor

Feat: Add driver for TMP102 temperature sensor for Skynode-N (#26241)

2026-01-12 18:42:51 +01:00

test_ppm

Fix duplicate newlines at the end of files

2024-07-19 14:33:36 +02:00

tone_alarm

…

transponder

SagetechMXS: remove two unused subscriptions (#26356)

2026-01-27 11:48:23 -09:00

uavcan

uavcan: add warning about CAN error counter reading issue (#26492)

2026-02-16 11:25:30 -09:00

uavcannode

uavcannode: implement hardpoint commands (#26334)

2026-02-08 18:36:11 -09:00

uwb

…

voxl2_io

Removed VOXL2_IO: tag from all voxl2_io debug messages as they are redundant

2026-02-10 15:45:40 -07:00

vtx

[vtx] Add VTX driver with Tramp and SmartAudio support

2026-01-26 11:05:22 +01:00

vtxtable

vtxtable: fix KConfig type from string to bool (#26359)

2026-02-03 13:14:47 +13:00

wind_sensor

fix files tags on the header comments (#23564)

2024-09-19 09:25:18 +03:00

drv_adc.h

…

drv_board_led.h

…

drv_dshot.h

[Sponsored by ARK] Bidirectional DShot (#23863)

2025-03-12 12:55:15 -06:00

drv_hrt.h

…

drv_input_capture.h

fix files tags on the header comments (#23564)

2024-09-19 09:25:18 +03:00

drv_io_heater.h

…

drv_led.h

…

drv_neopixel.h

fix files tags on the header comments (#23564)

2024-09-19 09:25:18 +03:00

drv_orb_dev.h

…

drv_pwm_output.h

fix files tags on the header comments (#23564)

2024-09-19 09:25:18 +03:00

drv_pwm_trigger.h

fix files tags on the header comments (#23564)

2024-09-19 09:25:18 +03:00

drv_sbus.h

…

drv_sensor.h

Feat: Add driver for TMP102 temperature sensor for Skynode-N (#26241)

2026-01-12 18:42:51 +01:00

drv_tone_alarm.h

…

drv_watchdog.h

…

Kconfig

…