parameters: add boolean support (PARAM_DEFINE_BOOL)

- real boolean parameter support saves a bit of space in export (bson) and in mavlink sync
2026-05-23 23:37:34 +08:00 · 2021-12-23 17:08:12 -05:00
3219 changed files with 88622 additions and 203151 deletions
@@ -28,7 +28,7 @@ pipeline {
          ]

          def base_builds = [
-            target: ["px4_sitl_default"],
+            target: ["px4_sitl_rtps"],
            image: docker_images.base,
            archive: false
          ]
@@ -42,8 +42,6 @@ pipeline {
                     "ark_can-gps_default",
                     "ark_can-rtk-gps_canbootloader",
                     "ark_can-rtk-gps_default",
-                     "ark_fmu-v6x_bootloader",
-                     "ark_fmu-v6x_default",
                     "atl_mantis-edu_default",
                     "av_x-v1_default",
                     "bitcraze_crazyflie_default",
@@ -54,59 +52,55 @@ pipeline {
                     "cuav_x7pro_default",
                     "cubepilot_cubeorange_default",
                     "cubepilot_cubeyellow_default",
-                     "diatone_mamba-f405-mk2_default",
                     "freefly_can-rtk-gps_canbootloader",
                     "freefly_can-rtk-gps_default",
                     "holybro_can-gps-v1_canbootloader",
                     "holybro_can-gps-v1_default",
                     "holybro_durandal-v1_default",
                     "holybro_kakutef7_default",
-                     "holybro_kakuteh7_default",
                     "holybro_pix32v5_default",
-                     "matek_gnss-m9n-f4_canbootloader",
-                     "matek_gnss-m9n-f4_default",
-                     "matek_h743-mini_default",
-                     "matek_h743-slim_default",
-                     "matek_h743_default",
+                     "matek_h743-slim",
                     "modalai_fc-v1_default",
+                     "modalai_fc-v1_rtps",
                     "modalai_fc-v2_default",
-                     "modalai_voxl2-io_default",
                     "mro_ctrl-zero-f7_default",
                     "mro_ctrl-zero-f7-oem_default",
-                     "mro_ctrl-zero-h7-oem_default",
                     "mro_ctrl-zero-h7_default",
+                     "mro_ctrl-zero-h7_rtps",
+                     "mro_ctrl-zero-h7-oem_default",
+                     "mro_ctrl-zero-h7-oem_rtps",
                     "mro_pixracerpro_default",
+                     "mro_pixracerpro_rtps",
                     "mro_x21-777_default",
                     "mro_x21_default",
                     "nxp_fmuk66-e_default",
+                     "nxp_fmuk66-e_rtps",
                     "nxp_fmuk66-e_socketcan",
                     "nxp_fmuk66-v3_default",
+                     "nxp_fmuk66-v3_rtps",
                     "nxp_fmuk66-v3_socketcan",
                     "nxp_fmurt1062-v1_default",
                     "nxp_ucans32k146_canbootloader",
                     "nxp_ucans32k146_default",
                     "omnibus_f4sd_default",
+                     "raspberrypi_pico_default",
                     "px4_fmu-v2_default",
                     "px4_fmu-v2_fixedwing",
-                     "px4_fmu-v2_lto",
                     "px4_fmu-v2_multicopter",
                     "px4_fmu-v2_rover",
                     "px4_fmu-v3_default",
                     "px4_fmu-v4_default",
                     "px4_fmu-v4pro_default",
-                     "px4_fmu-v5_cyphal",
                     "px4_fmu-v5_debug",
                     "px4_fmu-v5_default",
-                     "px4_fmu-v5_lto",
+                     "px4_fmu-v5_rtps",
                     "px4_fmu-v5_stackcheck",
                     "px4_fmu-v5_uavcanv0periph",
+                     "px4_fmu-v5_uavcanv1",
                     "px4_fmu-v5x_default",
-                     "px4_fmu-v6c_default",
                     "px4_fmu-v6u_default",
                     "px4_fmu-v6x_default",
                     "px4_io-v2_default",
-                     "raspberrypi_pico_default",
-                     "sky-drones_smartap-airlink_default",
                     "spracing_h7extreme_default",
                     "uvify_core_default"
            ],
@@ -176,7 +170,7 @@ def createBuildNode(Boolean archive, String docker_image, String target) {
            try {
              sh('export')
              checkout(scm)
-              sh('make distclean; git clean -ff -x -d .')
+              sh('make distclean')
              sh('git fetch --tags')
              sh('ccache -s')
              sh('make ' + target)
@@ -193,7 +187,7 @@ def createBuildNode(Boolean archive, String docker_image, String target) {
              throw (exc)
            }
            finally {
-              sh('make distclean; git clean -ff -x -d .')
+              sh('make distclean')
            }
          }
        }
@@ -25,7 +25,7 @@ pipeline {
              }
              post {
                always {
-                  sh 'make distclean; git clean -ff -x -d .'
+                    sh 'make distclean'
                }
              }
            } // stage build
@@ -74,8 +74,7 @@ pipeline {
              }
              post {
                always {
-                  sh 'cat /tmp/pyserial_spy_file.txt || true'
-                  sh './platforms/nuttx/Debug/jlink_gdb_backtrace_simple.sh build/cubepilot_cubeorange_test/cubepilot_cubeorange_test.elf || true'
+                    sh './platforms/nuttx/Debug/jlink_gdb_backtrace_simple.sh build/cubepilot_cubeorange_test/cubepilot_cubeorange_test.elf || true'
                }
              }
            } // stage test
@@ -100,7 +99,7 @@ pipeline {
              }
              post {
                always {
-                  sh 'make distclean; git clean -ff -x -d .'
+                    sh 'make distclean'
                }
              }
            } // stage build
@@ -144,8 +143,7 @@ pipeline {
              }
              post {
                always {
-                  sh 'cat /tmp/pyserial_spy_file.txt || true'
-                  sh './platforms/nuttx/Debug/jlink_gdb_backtrace_simple.sh build/cuav_x7pro_test/cuav_x7pro_test.elf || true'
+                    sh './platforms/nuttx/Debug/jlink_gdb_backtrace_simple.sh build/cuav_x7pro_test/cuav_x7pro_test.elf || true'
                }
              }
            } // stage test
@@ -170,7 +168,7 @@ pipeline {
              }
              post {
                always {
-                  sh 'make distclean; git clean -ff -x -d .'
+                    sh 'make distclean'
                }
              }
            } // stage build
@@ -214,8 +212,7 @@ pipeline {
              }
              post {
                always {
-                  sh 'cat /tmp/pyserial_spy_file.txt || true'
-                  sh './platforms/nuttx/Debug/jlink_gdb_backtrace_simple.sh build/px4_fmu-v3_test/px4_fmu-v3_test.elf || true'
+                    sh './platforms/nuttx/Debug/jlink_gdb_backtrace_simple.sh build/px4_fmu-v3_test/px4_fmu-v3_test.elf || true'
                }
              }
            } // stage test
@@ -240,7 +237,7 @@ pipeline {
              }
              post {
                always {
-                  sh 'make distclean; git clean -ff -x -d .'
+                    sh 'make distclean'
                }
              }
            } // stage build
@@ -283,8 +280,7 @@ pipeline {
              }
              post {
                always {
-                  sh 'cat /tmp/pyserial_spy_file.txt || true'
-                  sh './platforms/nuttx/Debug/jlink_gdb_backtrace_simple.sh build/px4_fmu-v4_test/px4_fmu-v4_test.elf || true'
+                    sh './platforms/nuttx/Debug/jlink_gdb_backtrace_simple.sh build/px4_fmu-v4_test/px4_fmu-v4_test.elf || true'
                }
              }
            } // stage test
@@ -309,7 +305,7 @@ pipeline {
              }
              post {
                always {
-                  sh 'make distclean; git clean -ff -x -d .'
+                    sh 'make distclean'
                }
              }
            } // stage build
@@ -353,8 +349,7 @@ pipeline {
              }
              post {
                always {
-                  sh 'cat /tmp/pyserial_spy_file.txt || true'
-                  sh './platforms/nuttx/Debug/jlink_gdb_backtrace_simple.sh build/px4_fmu-v4pro_test/px4_fmu-v4pro_test.elf || true'
+                    sh './platforms/nuttx/Debug/jlink_gdb_backtrace_simple.sh build/px4_fmu-v4pro_test/px4_fmu-v4pro_test.elf || true'
                }
              }
            } // stage test
@@ -379,7 +374,7 @@ pipeline {
              }
              post {
                always {
-                  sh 'make distclean; git clean -ff -x -d .'
+                    sh 'make distclean'
                }
              }
            } // stage build
@@ -412,7 +407,7 @@ pipeline {

                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "sd_bench"'
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "sd_bench -v"'
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "sd_bench -u -v" || true'
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "sd_bench -u -v"'
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "sd_stress"'

                    // test dataman
@@ -431,6 +426,7 @@ pipeline {
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set IMU_GYRO_RATEMAX 200" || true' // limit cpu usage
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set MAV_0_CONFIG 0" || true'       // limit cpu usage
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set MAV_1_CONFIG 0" || true'       // limit cpu usage
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SDLOG_MODE -1" || true'        // limit cpu usage
                    checkStatus()
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "px4io status" || true'
                  }
@@ -443,8 +439,7 @@ pipeline {
              }
              post {
                always {
-                  sh 'cat /tmp/pyserial_spy_file.txt || true'
-                  sh './platforms/nuttx/Debug/jlink_gdb_backtrace_simple.sh build/px4_fmu-v5_debug/px4_fmu-v5_debug.elf || true'
+                    sh './platforms/nuttx/Debug/jlink_gdb_backtrace_simple.sh build/px4_fmu-v5_debug/px4_fmu-v5_debug.elf || true'
                }
              }
            } // stage test
@@ -469,7 +464,7 @@ pipeline {
              }
              post {
                always {
-                  sh 'make distclean; git clean -ff -x -d .'
+                    sh 'make distclean'
                }
              }
            } // stage build
@@ -513,6 +508,7 @@ pipeline {
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set IMU_GYRO_RATEMAX 200" || true' // limit cpu usage
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set MAV_0_CONFIG 0" || true'       // limit cpu usage
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set MAV_1_CONFIG 0" || true'       // limit cpu usage
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SDLOG_MODE -1" || true'        // limit cpu usage
                    checkStatus()
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "px4io status" || true'
                  }
@@ -525,8 +521,7 @@ pipeline {
              }
              post {
                always {
-                  sh 'cat /tmp/pyserial_spy_file.txt || true'
-                  sh './platforms/nuttx/Debug/jlink_gdb_backtrace_simple.sh build/px4_fmu-v5_stackcheck/px4_fmu-v5_stackcheck.elf || true'
+                    sh './platforms/nuttx/Debug/jlink_gdb_backtrace_simple.sh build/px4_fmu-v5_stackcheck/px4_fmu-v5_stackcheck.elf || true'
                }
              }
            } // stage test
@@ -551,7 +546,7 @@ pipeline {
              }
              post {
                always {
-                  sh 'make distclean; git clean -ff -x -d .'
+                    sh 'make distclean'
                }
              }
            } // stage build
@@ -595,8 +590,7 @@ pipeline {
              }
              post {
                always {
-                  sh 'cat /tmp/pyserial_spy_file.txt || true'
-                  sh './platforms/nuttx/Debug/jlink_gdb_backtrace_simple.sh build/px4_fmu-v5_test/px4_fmu-v5_test.elf || true'
+                    sh './platforms/nuttx/Debug/jlink_gdb_backtrace_simple.sh build/px4_fmu-v5_test/px4_fmu-v5_test.elf || true'
                }
              }
            } // stage test
@@ -621,7 +615,7 @@ pipeline {
              }
              post {
                always {
-                  sh 'make distclean; git clean -ff -x -d .'
+                    sh 'make distclean'
                }
              }
            } // stage build
@@ -665,8 +659,7 @@ pipeline {
              }
              post {
                always {
-                  sh 'cat /tmp/pyserial_spy_file.txt || true'
-                  sh './platforms/nuttx/Debug/jlink_gdb_backtrace_simple.sh build/nxp_fmuk66-v3_test/nxp_fmuk66-v3_test.elf || true'
+                    sh './platforms/nuttx/Debug/jlink_gdb_backtrace_simple.sh build/nxp_fmuk66-v3_test/nxp_fmuk66-v3_test.elf || true'
                }
              }
            } // stage test
@@ -692,7 +685,7 @@ void checkoutSCM() {
  retry(3) {
    checkout scm
    sh 'export'
-    sh 'make distclean; git clean -ff -x -d .'
+    sh 'make distclean'
    sh 'git fetch --tags'
    sh 'ccache -z'
  }
@@ -705,21 +698,18 @@ void quickCalibrate() {

  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "gyro_calibration status || true"'

-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "commander calibrate accel quick; sleep 1"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "commander calibrate accel quick"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param show CAL_ACC*"'

-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "commander calibrate gyro; sleep 2"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "commander calibrate gyro"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param show CAL_GYRO*"'

-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "commander calibrate level; sleep 2"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "commander calibrate level"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param show SENS*"'

-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "commander calibrate mag quick; sleep 1"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "commander calibrate mag quick"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param show CAL_MAG*"'

-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "commander calibrate baro; sleep 5"'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param show CAL_BARO*"'
-
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param show CAL_*"' // parameters after
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "sensors status"'
 }
@@ -728,59 +718,51 @@ void checkStatus() {
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param save"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param status"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param show SYS*"'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param dump"'
  sh './Tools/HIL/reboot.py --device `find /dev/serial -name *usb-*`' // reboot to apply
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param show SYS*"'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param dump"'

  // run logger
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "logger on"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "logger on" || true'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "sleep 1"' // sleep before continuing
  // status commands
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "cat /proc/fs/blocks"'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "cat /proc/fs/mount"'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "cat /proc/fs/usage"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "cat /proc/meminfo"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "cat /proc/uptime"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "commander check" || true'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "commander status"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "dataman status"'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "df -h"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "df"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "ekf2 status"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "free"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "gps status"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener cpuload; top once; listener cpuload"'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "logger status"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "logger status" || true'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "ls /"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "ls /bin"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "ls /dev"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "ls /etc"'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "ls /fs"'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "ls /fs/microsd"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "ls /obj"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "ls /proc"'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "ls /proc/fs"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "mavlink status streams" || true'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "mavlink status" || true'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "mount"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "mtd status"'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param dump"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param show" || true'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param status"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "perf latency"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "perf"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "ps"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "pwm info -d /dev/pwm_output0"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "pwm info -d /dev/pwm_output1" || true'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "pwm_out status"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "sensors status"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "top once"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "uavcan status" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "uorb status" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "uorb top -1 -a" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "uorb status"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "uorb top -1 -a"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "ver all"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "work_queue status"'
  // stop logger
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "logger off"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "logger off" || true'
 }

 void resetParameters() {
@@ -792,14 +774,12 @@ void resetParameters() {
 void runTests() {

  // test loading a range of airframes
-  sh './Tools/HIL/test_airframes.sh `find /dev/serial -name *usb-*` 2100 3000 4001 6001 8001'
+  sh './Tools/HIL/test_airframes.sh `find /dev/serial -name *usb-*` 1000 1001 2100 3000 4001 6001 8001 10016'

  resetParameters()

  sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "IMU_GYRO_CAL_EN" --value "0" || true' // disable during testing
  sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "IMU_GYRO_FFT_EN" --value "0" || true' // disable during testing
-  sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "SENS_IMU_AUTOCAL" --value "0" || true' // disable during testing
-  sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "SENS_MAG_AUTOCAL" --value "0" || true' // disable during testing

  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param save"'
  sh './Tools/HIL/reboot.py --device `find /dev/serial -name *usb-*`' // reboot to apply
@@ -807,9 +787,6 @@ void runTests() {
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "top once"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "work_queue status"'

-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "ostest"'
-  sh './Tools/HIL/reboot.py --device `find /dev/serial -name *usb-*`' // reboot after ostest
-
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "commander_tests" || true'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "controllib_test"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "lightware_laser_test"'
@@ -842,19 +819,37 @@ void runTests() {
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "sensors stop"' // ignore irrelevant sensor timeouts during microbenchmarks
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "microbench all"'

-  //sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "calib_udelay"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "calib_udelay"'
+
+  // test rebooting multiple times
+  resetParameters()
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param dump"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_AUTOSTART 4001" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param dump"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param save"'
+  sh './Tools/HIL/reboot.py --device `find /dev/serial -name *usb-*`'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param show CBRK*; param show SYS*"' // check that CBRK_BUZZER and SYS_AUTOSTART haven't been lost
+  sh './Tools/HIL/reboot.py --device `find /dev/serial -name *usb-*`'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param show CBRK*; param show SYS*"' // check that CBRK_BUZZER and SYS_AUTOSTART haven't been lost
+  sh './Tools/HIL/reboot.py --device `find /dev/serial -name *usb-*`'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param show CBRK*; param show SYS*"' // check that CBRK_BUZZER and SYS_AUTOSTART haven't been lost
+  sh './Tools/HIL/reboot.py --device `find /dev/serial -name *usb-*`'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param show CBRK*; param show SYS*"' // check that CBRK_BUZZER and SYS_AUTOSTART haven't been lost
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param dump"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param dump /fs/microsd/parameters_backup.bson" || true'
 }

 void printTopics() {
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "ls /obj"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "uorb status"'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "uorb top -1 -a" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "uorb top -1 -a"'

  // these are for casually inspecting the system, output failure doesn't matter
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener actuator_armed" || true'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener actuator_controls_0" || true'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener actuator_controls_1" || true'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener actuator_controls_2" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener actuator_controls_3" || true'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener actuator_outputs" || true'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener adc_report" || true'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener airspeed_validated" || true'
@@ -864,15 +859,12 @@ void printTopics() {
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener cpuload" || true'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener distance_sensor" || true'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener ekf2_timestamps" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener ekf_gps_drift" || true'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener esc_status" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_aid_src_fake_pos" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_aid_src_gnss_pos" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_aid_src_gnss_vel" || true'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_attitude" || true'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_baro_bias" || true'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_event_flags" || true'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_global_position" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_gps_status" || true'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_innovation_test_ratios" || true'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_innovation_variances" || true'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_innovations" || true'
@@ -916,6 +908,7 @@ void printTopics() {
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener system_power" || true'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener task_stack_info" || true'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener telemetry_status" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener test_motor" || true'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener trajectory_setpoint" || true'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener tune_control" || true'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener vehicle_acceleration" || true'
@@ -937,12 +930,16 @@ void printTopics() {
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener vehicle_odometry" || true'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener vehicle_rates_setpoint" || true'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener vehicle_status" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener failsafe_flags" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener vehicle_status_flags" || true'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener vtol_vehicle_status" || true'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener yaw_estimator_status" || true'
 }

 void resetBoard() {
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "df -h" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "ls /fs/" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "ls /fs/microsd" || true'
+
  resetParameters()

  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_AUTOSTART 0" || true'
@@ -952,4 +949,29 @@ void resetBoard() {
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SDLOG_MODE -1" || true'        // limit cpu usage
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "echo > /fs/microsd/.format" || true'
  sh './Tools/HIL/reboot.py --device `find /dev/serial -name *usb-*`' // reboot to apply
+
+  // check SD card
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "df -h" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "ls /fs/microsd" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "ls /proc/fs" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "cat /proc/fs/blocks" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "cat /proc/fs/mount" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "cat /proc/fs/usage" || true'
+  // format
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "dataman stop" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "umount /fs/microsd" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "top once" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "mkfatfs -F 32 /dev/mmcsd0" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "top once" || true'
+
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "mount -t vfat /dev/mmcsd0 /fs/microsd" || true'
+  // check SD card
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "df -h" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "ls /fs/microsd" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "ls /proc/fs" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "cat /proc/fs/blocks" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "cat /proc/fs/mount" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "cat /proc/fs/usage" || true'
+
+  sh './Tools/HIL/reboot.py --device `find /dev/serial -name *usb-*`' // reboot to apply
 }
@@ -1,17 +1,11 @@
 ---
 Checks:          '*,
-                  -*-avoid-c-arrays,
-                  -*-uppercase-literal-suffix,
-                  -*-magic-numbers,
-                  -altera-id-dependent-backward-branch,
-                  -altera-unroll-loops,
                  -android*,
                  -bugprone-integer-division,
                  -cert-dcl50-cpp,
                  -cert-env33-c,
                  -cert-err34-c,
                  -cert-err58-cpp,
-                  -cert-flp30-c,
                  -cert-msc30-c,
                  -cert-msc50-cpp,
                  -clang-analyzer-core.CallAndMessage,
@@ -24,7 +18,6 @@ Checks:          '*,
                  -clang-analyzer-deadcode.DeadStores,
                  -clang-analyzer-optin.cplusplus.VirtualCall,
                  -clang-analyzer-optin.performance.Padding,
-                  -clang-analyzer-security.FloatLoopCounter,
                  -clang-analyzer-security.insecureAPI.strcpy,
                  -clang-analyzer-unix.API,
                  -clang-analyzer-unix.cstring.BadSizeArg,
@@ -44,7 +37,8 @@ Checks:          '*,
                  -cppcoreguidelines-pro-type-union-access,
                  -cppcoreguidelines-pro-type-vararg,
                  -cppcoreguidelines-special-member-functions,
-                  -fuchsia-*,
+                  -fuchsia-default-arguments,
+                  -fuchsia-overloaded-operator,
                  -google-build-using-namespace,
                  -google-explicit-constructor,
                  -google-global-names-in-headers,
@@ -68,7 +62,6 @@ Checks:          '*,
                  -hicpp-use-equals-delete,
                  -hicpp-use-override,
                  -hicpp-vararg,
-                  -llvmlibc-*,
                  -llvm-header-guard,
                  -llvm-include-order,
                  -llvm-namespace-comment,
@@ -91,7 +84,6 @@ Checks:          '*,
                  -modernize-use-override,
                  -modernize-use-trailing-return-type,
                  -modernize-use-using,
-                  -modernize-use-trailing-return-type,
                  -performance-inefficient-string-concatenation,
                  -readability-avoid-const-params-in-decls,
                  -readability-container-size-empty,
@@ -1,7 +0,0 @@
-FROM gcr.io/oss-fuzz-base/base-builder:v1
-COPY . $SRC/PX4-Autopilot
-RUN apt-get install -y libjpeg8-dev zlib1g-dev
-RUN pip3 install --upgrade pip
-RUN python3 -m pip install -r $SRC/PX4-Autopilot/Tools/setup/requirements.txt
-WORKDIR $SRC/PX4-Autopilot
-COPY ./.clusterfuzzlite/build.sh $SRC/
@@ -1,4 +0,0 @@
-#!/usr/bin/env bash -eu
-
-PX4_FUZZ=1 make px4_sitl
-cp build/px4_sitl_default/bin/px4 $OUT/px4
@@ -1 +0,0 @@
-language: c++
@@ -19,8 +19,9 @@
 *.jar    binary
 *.xml    text eol=lf

-# PX4 msgs, etc
+# PX4 mixers, msgs, etc
 *.bin    binary
+*.mix    text eol=lf
 *.msg    text eol=lf
 *.config text eol=lf
 *.sdf    text eol=lf
@@ -1,34 +1,32 @@
 ---
-name: 🐛 Bug report
+name: Bug report
 about: Create a report to help us improve
-labels: bug-report

 ---

-## Describe the bug
+**Describe the bug**
 A clear and concise description of the bug.

-## To Reproduce
+**To Reproduce**
 Steps to reproduce the behavior:
 1. Drone switched on '...'
 2. Uploaded mission '....' (attach QGC mission file)
 3. Took off '....'
 4. See error

-## Expected behavior
+**Expected behavior**
 A clear and concise description of what you expected to happen.

-## Log Files and Screenshots
+**Log Files and Screenshots**
 *Always* provide a link to the flight log file:
- Download the flight log file from the vehicle ([tutorial](https://docs.px4.io/main/en/getting_started/flight_reporting.html)).
- Upload the log to the [PX4 Flight Review](http://logs.px4.io/)
- Share the link to the log (Copy and paste the URL of the log)
+- Download the flight log file from the vehicle ([tutorial](https://docs.px4.io/master/en/getting_started/flight_reporting.html)).
+- Share the link to a log showing the problem on [PX4 Flight Review](http://logs.px4.io/).

 Add screenshots to help explain your problem.

-## Drone (please complete the following information):
+**Drone (please complete the following information):**
 - Describe the type of drone.
 - Photo of the IMU / autopilot setup if possible.

-## Additional context
+**Additional context**
 Add any other context about the problem here.
@@ -1,20 +1,19 @@
 ---
 name: 🚀 Feature Request
 about: Suggest an idea for this project
-labels: feature-request

 ---

 For general questions please use [PX4 Discuss](http://discuss.px4.io/) or Slack (you can find an invite link on this project README).

-## Describe problem solved by the proposed feature
+**Describe problem solved by the proposed feature**
 A clear and concise description of the problem, if any, this feature will solve. E.g. I'm always frustrated when ...

-## Describe your preferred solution
+**Describe your preferred solution**
 A clear and concise description of what you want to happen.

-## Describe possible alternatives
+**Describe possible alternatives**
 A clear and concise description of alternative solutions or features you've considered.

-## Additional context
+**Additional context**
 Add any other context or screenshots for the feature request here.
@@ -1,13 +1,10 @@
 ---
 name: ⛔ Support Question
-about: See http://discuss.px4.io/ for questions about using PX4.
+about: See [PX4 Discuss](http://discuss.px4.io/) for questions about using PX4.

 ---

-## Attention! Please read the note below
-
-We use GitHub issues only to discuss PX4 bugs and new features.
-
-**For questions about using PX4 or related components, please use [PX4 Discuss](http://discuss.px4.io/).**
+We use GitHub issues only to discuss PX4 bugs and new features. For
+questions about using PX4 or related components, please use [PX4 Discuss](http://discuss.px4.io/).

 Thanks!
@@ -1,11 +1,9 @@
 ---
 name: ⛔ Documentation Issue
-about: See https://github.com/PX4/px4_user_guide for documentation issues
+about: See https://github.com/PX4/Devguide for documentation issues

 ---

-## Attention! Please read the note below
-
-**Please submit the documentation issue to the [User Guide](https://github.com/PX4/px4_user_guide) repository.**
+PX4 has dedicated repositories for developer documentation (https://github.com/PX4/Devguide) and user documentation (https://github.com/PX4/px4_user_guide).

 Thanks!
@@ -1,34 +0,0 @@
-name: ClusterFuzzLite batch fuzzing
-on:
-  schedule:
-    - cron: '0 6 * * *'  # UTC 6am every day.
-permissions: read-all
-jobs:
-  BatchFuzzing:
-    runs-on: ubuntu-latest
-    strategy:
-      fail-fast: false
-      matrix:
-        sanitizer:
-        - address
-        - undefined
-        - memory
-    steps:
-    - name: Build Fuzzers (${{ matrix.sanitizer }})
-      id: build
-      uses: google/clusterfuzzlite/actions/build_fuzzers@v1
-      with:
-        sanitizer: ${{ matrix.sanitizer }}
-    - name: Run Fuzzers (${{ matrix.sanitizer }})
-      id: run
-      uses: google/clusterfuzzlite/actions/run_fuzzers@v1
-      with:
-        github-token: ${{ secrets.GITHUB_TOKEN }}
-        fuzz-seconds: 1800 # 30 mins
-        mode: 'batch'
-        sanitizer: ${{ matrix.sanitizer }}
-        # Optional but recommended: For storing certain artifacts from fuzzing.
-        # See later section on "Git repo for storage".
-        # storage-repo: https://${{ secrets.PERSONAL_ACCESS_TOKEN }}@github.com/OWNER/STORAGE-REPO-NAME.git
-        # storage-repo-branch: main   # Optional. Defaults to "main"
-        # storage-repo-branch-coverage: gh-pages  # Optional. Defaults to "gh-pages".
@@ -3,7 +3,7 @@ name: Checks
 on:
  push:
    branches:
-    - 'main'
+    - 'master'
  pull_request:
    branches:
    - '*'
@@ -23,6 +23,7 @@ jobs:
          "shellcheck_all",
          "NO_NINJA_BUILD=1 px4_fmu-v5_default",
          "NO_NINJA_BUILD=1 px4_sitl_default",
+          "BUILD_MICRORTPS_AGENT=1 px4_sitl_rtps",
          "airframe_metadata",
          "module_documentation",
          "parameters_metadata",
@@ -3,7 +3,7 @@ name: Clang Tidy
 on:
  push:
    branches:
-    - 'main'
+    - 'master'
  pull_request:
    branches:
    - '*'
@@ -3,7 +3,7 @@ name: Linux Targets
 on:
  push:
    branches:
-    - 'main'
+    - 'master'
  pull_request:
    branches:
    - '*'
@@ -3,7 +3,7 @@ name: Linux ARM64 Targets
 on:
  push:
    branches:
-    - 'main'
+    - 'master'
  pull_request:
    branches:
    - '*'
@@ -3,7 +3,7 @@ name: MacOS build
 on:
  push:
    branches:
-    - 'main'
+    - 'master'
  pull_request:
    branches:
    - '*'
@@ -3,7 +3,7 @@ name: Nuttx Targets
 on:
  push:
    branches:
-    - 'main'
+    - 'master'
  pull_request:
    branches:
    - '*'
@@ -20,8 +20,6 @@ jobs:
          ark_can-flow,
          ark_can-gps,
          ark_can-rtk-gps,
-          ark_cannode,
-          ark_fmu-v6x,
          atl_mantis-edu,
          av_x-v1,
          bitcraze_crazyflie,
@@ -31,16 +29,11 @@ jobs:
          cuav_x7pro,
          cubepilot_cubeorange,
          cubepilot_cubeyellow,
-          diatone_mamba-f405-mk2,
          freefly_can-rtk-gps,
          holybro_can-gps-v1,
          holybro_durandal-v1,
          holybro_kakutef7,
-          holybro_kakuteh7,
          holybro_pix32v5,
-          matek_gnss-m9n-f4,
-          matek_h743,
-          matek_h743-mini,
          matek_h743-slim,
          modalai_fc-v1,
          modalai_fc-v2,
@@ -56,17 +49,15 @@ jobs:
          nxp_fmurt1062-v1,
          nxp_ucans32k146,
          omnibus_f4sd,
+          raspberrypi_pico,
          px4_fmu-v2,
          px4_fmu-v3,
          px4_fmu-v4,
          px4_fmu-v4pro,
          px4_fmu-v5,
          px4_fmu-v5x,
-          px4_fmu-v6c,
          px4_fmu-v6u,
          px4_fmu-v6x,
-          raspberrypi_pico,
-          sky-drones_smartap-airlink,
          spracing_h7extreme,
          uvify_core
          ]
@@ -3,7 +3,7 @@ name: Deploy metadata for all targets
 on:
  push:
    branches:
-    - 'main'
+    - 'master'
    - 'release/*'
    - 'pr-metadata-test'

@@ -1,44 +0,0 @@
-name: Failsafe Simulator Build
-
-on:
-  push:
-    branches:
-    - 'main'
-  pull_request:
-    branches:
-    - '*'
-
-jobs:
-  build:
-    runs-on: ubuntu-latest
-    defaults:
-      run:
-        shell: bash
-    strategy:
-      fail-fast: false
-      matrix:
-        check: [
-          "failsafe_web",
-        ]
-    container:
-      image: px4io/px4-dev-nuttx-focal:2021-09-08
-      options: --privileged --ulimit core=-1 --security-opt seccomp=unconfined
-    steps:
-    - uses: actions/checkout@v1
-      with:
-        token: ${{ secrets.ACCESS_TOKEN }}
-
-    - name: check environment
-      run: |
-          export
-          ulimit -a
-    - name: install emscripten
-      run: |
-        git clone https://github.com/emscripten-core/emsdk.git _emscripten_sdk
-        cd _emscripten_sdk
-        ./emsdk install latest
-        ./emsdk activate latest
-    - name: ${{matrix.check}}
-      run: |
-        . ./_emscripten_sdk/emsdk_env.sh
-        make ${{matrix.check}}
@@ -3,7 +3,7 @@ name: MAVROS Mission Tests
 on:
  push:
    branches:
-    - 'main'
+    - 'master'
  pull_request:
    branches:
    - '*'
@@ -3,7 +3,7 @@ name: MAVROS Offboard Tests
 on:
  push:
    branches:
-    - 'main'
+    - 'master'
  pull_request:
    branches:
    - '*'
@@ -3,7 +3,7 @@ name: Metadata
 on:
  push:
    branches:
-    - 'main'
+    - 'master'
    - 'release/*'
    - 'pr-metadata-test'

@@ -116,7 +116,7 @@ jobs:
        ls -ls *
      # TODO: deploy graph_px4_sitl.json to S3 px4-travis:Firmware/master/

-  ROS2_msgs:
+  micrortps_agent:
    runs-on: ubuntu-latest
    container: px4io/px4-dev-base-focal:2021-09-08
    steps:
@@ -124,8 +124,34 @@ jobs:
      with:
        token: ${{ secrets.ACCESS_TOKEN }}

-    - name: PX4 ROS2 msgs
+    - name: microRTPS agent
+      run: |
+        make px4_sitl_rtps
+        git clone https://github.com/PX4/micrortps_agent.git
+        cp -R build/px4_sitl_rtps/src/modules/micrortps_bridge/micrortps_agent/* micrortps_agent
+
+  ROS_msgs:
+    runs-on: ubuntu-latest
+    container: px4io/px4-dev-base-focal:2021-09-08
+    steps:
+    - uses: actions/checkout@v1
+      with:
+        token: ${{ secrets.ACCESS_TOKEN }}
+
+    - name: PX4 ROS msgs
      run: |
        git clone https://github.com/PX4/px4_msgs.git
-        rm px4_msgs/msg/*.msg
-        cp msg/*.msg px4_msgs/msg/
+        python3 msg/tools/uorb_to_ros_msgs.py msg/ px4_msgs/msg/
+
+  ROS2_bridge:
+    runs-on: ubuntu-latest
+    container: px4io/px4-dev-base-focal:2021-09-08
+    steps:
+    - uses: actions/checkout@v1
+      with:
+        token: ${{ secrets.ACCESS_TOKEN }}
+
+    - name: PX4 ROS2 bridge
+      run: |
+        git clone https://github.com/PX4/px4_ros_com.git
+        ./msg/tools/uorb_to_ros_urtps_topics.py -i msg/tools/urtps_bridge_topics.yaml -o px4_ros_com/templates/urtps_bridge_topics.yaml
@@ -3,7 +3,7 @@ name: Python CI Checks
 on:
  push:
    branches:
-    - 'main'
+    - 'master'
  pull_request:
    branches:
    - '*'
@@ -3,7 +3,7 @@ name: SITL Tests
 on:
  push:
    branches:
-    - 'main'
+    - 'master'
  pull_request:
    branches:
    - '*'
@@ -29,9 +29,9 @@ jobs:
        token: ${{ secrets.ACCESS_TOKEN }}

    - name: Download MAVSDK
-      run: wget "https://github.com/mavlink/MAVSDK/releases/download/v$(cat test/mavsdk_tests/MAVSDK_VERSION)/libmavsdk-dev_$(cat test/mavsdk_tests/MAVSDK_VERSION)_ubuntu20.04_amd64.deb"
+      run: wget "https://github.com/mavlink/MAVSDK/releases/download/v$(cat test/mavsdk_tests/MAVSDK_VERSION)/mavsdk_$(cat test/mavsdk_tests/MAVSDK_VERSION)_ubuntu20.04_amd64.deb"
    - name: Install MAVSDK
-      run: dpkg -i "libmavsdk-dev_$(cat test/mavsdk_tests/MAVSDK_VERSION)_ubuntu20.04_amd64.deb"
+      run: dpkg -i "mavsdk_$(cat test/mavsdk_tests/MAVSDK_VERSION)_ubuntu20.04_amd64.deb"

    - name: Prepare ccache timestamp
      id: ccache_cache_timestamp
@@ -93,6 +93,7 @@ rules.ninja
 /googletest-*/
 /logs
 /mavsdk_tests
+/test_mixer_multirotor
 /unit-*
 /uORB/
 DartConfiguration.tcl
@@ -6,18 +6,22 @@
 	path = src/drivers/uavcan/libuavcan
 	url = https://github.com/dronecan/libuavcan.git
 	branch = main
-[submodule "Tools/simulation/jmavsim/jMAVSim"]
-	path = Tools/simulation/jmavsim/jMAVSim
+[submodule "Tools/jMAVSim"]
+	path = Tools/jMAVSim
 	url = https://github.com/PX4/jMAVSim.git
-	branch = main
-[submodule "Tools/simulation/gazebo/sitl_gazebo"]
-	path = Tools/simulation/gazebo/sitl_gazebo
+	branch = master
+[submodule "Tools/sitl_gazebo"]
+	path = Tools/sitl_gazebo
 	url = https://github.com/PX4/PX4-SITL_gazebo.git
-	branch = main
+	branch = master
 [submodule "src/drivers/gps/devices"]
 	path = src/drivers/gps/devices
 	url = https://github.com/PX4/PX4-GPSDrivers.git
-	branch = main
+	branch = master
+[submodule "src/modules/micrortps_bridge/micro-CDR"]
+	path = src/modules/micrortps_bridge/micro-CDR
+	url = https://github.com/PX4/Micro-CDR.git
+	branch = master
 [submodule "platforms/nuttx/NuttX/nuttx"]
 	path = platforms/nuttx/NuttX/nuttx
 	url = https://github.com/PX4/NuttX.git
@@ -27,19 +31,19 @@
 	url = https://github.com/PX4/NuttX-apps.git
 	branch = px4_firmware_nuttx-10.1.0+
 [submodule "Tools/flightgear_bridge"]
-	path = Tools/simulation/flightgear/flightgear_bridge
+	path = Tools/flightgear_bridge
 	url = https://github.com/PX4/PX4-FlightGear-Bridge.git
-[submodule "Tools/simulation/jsbsim/jsbsim_bridge"]
-	path = Tools/simulation/jsbsim/jsbsim_bridge
+[submodule "Tools/jsbsim_bridge"]
+	path = Tools/jsbsim_bridge
 	url = https://github.com/PX4/px4-jsbsim-bridge.git
-[submodule "src/drivers/cyphal/libcanard"]
-	path = src/drivers/cyphal/libcanard
-	url = https://github.com/opencyphal/libcanard.git
-[submodule "src/drivers/cyphal/public_regulated_data_types"]
-	path = src/drivers/cyphal/public_regulated_data_types
-	url = https://github.com/opencyphal/public_regulated_data_types.git
-[submodule "src/drivers/cyphal/legacy_data_types"]
-	path = src/drivers/cyphal/legacy_data_types
+[submodule "src/drivers/uavcan_v1/libcanard"]
+	path = src/drivers/uavcan_v1/libcanard
+	url = https://github.com/UAVCAN/libcanard.git
+[submodule "src/drivers/uavcan_v1/public_regulated_data_types"]
+	path = src/drivers/uavcan_v1/public_regulated_data_types
+	url = https://github.com/UAVCAN/public_regulated_data_types.git
+[submodule "src/drivers/uavcan_v1/legacy_data_types"]
+	path = src/drivers/uavcan_v1/legacy_data_types
 	url = https://github.com/PX4/public_regulated_data_types.git
 	branch = legacy
 [submodule "src/lib/crypto/monocypher"]
@@ -49,7 +53,9 @@
 [submodule "src/lib/events/libevents"]
 	path = src/lib/events/libevents
 	url = https://github.com/mavlink/libevents.git
-	branch = main
+[submodule "Tools/simulation-ignition"]
+	path = Tools/simulation-ignition
+	url = https://github.com/PX4/px4-simulation-ignition.git
 [submodule "src/lib/crypto/libtomcrypt"]
 	path = src/lib/crypto/libtomcrypt
 	url = https://github.com/PX4/libtomcrypt.git
@@ -58,7 +64,3 @@
 	path = src/lib/crypto/libtommath
 	url = https://github.com/PX4/libtommath.git
 	branch = px4
-[submodule "src/modules/microdds_client/Micro-XRCE-DDS-Client"]
-	path = src/modules/microdds_client/Micro-XRCE-DDS-Client
-	url = https://github.com/PX4/Micro-XRCE-DDS-Client.git
-	branch = px4
@@ -11,7 +11,7 @@ matrix:
      dist: xenial
      # In order to stay under the coverity rate limit, we only run this weekly
      # and not on push which is configured in travis-ci settings.
-      if: branch = main
+      if: branch = master

 before_install:
    - echo -n | openssl s_client -connect scan.coverity.com:443 | sed -ne '/-BEGIN CERTIFICATE-/,/-END CERTIFICATE-/p' | sudo tee -a /etc/ssl/certs/ca-
@@ -9,5 +9,3 @@ launch.json
 ipch/

 browse.vc.db*
-
-*.log
@@ -2,15 +2,15 @@ CONFIG:
  default: px4_sitl_default
  choices:
    px4_sitl_default:
-      short: px4_sitl_default
+      short: px4_sitl
      buildType: RelWithDebInfo
      settings:
        CONFIG: px4_sitl_default
-    px4_sitl_nolockstep:
-      short: px4_sitl_nolockstep
+    px4_sitl_rtps:
+      short: px4_sitl_rtps
      buildType: RelWithDebInfo
      settings:
-        CONFIG: px4_sitl_nolockstep
+        CONFIG: px4_sitl_rtps
    px4_sitl_asan:
      short: px4_sitl (AddressSanitizer)
      buildType: AddressSanitizer
@@ -121,26 +121,6 @@ CONFIG:
      buildType: MinSizeRel
      settings:
        CONFIG: ark_can-rtk-gps_canbootloader
-    ark_cannode_default:
-      short: ark_cannode_default
-      buildType: MinSizeRel
-      settings:
-        CONFIG: ark_cannode_default
-    ark_cannode_canbootloader:
-      short: ark_cannode_canbootloader
-      buildType: MinSizeRel
-      settings:
-        CONFIG: ark_cannode_canbootloader
-    ark_fmu-v6x_bootloader:
-      short: ark_fmu-v6x_bootloader
-      buildType: MinSizeRel
-      settings:
-        CONFIG: ark_fmu-v6x_bootloader
-    ark_fmu-v6x_default:
-      short: ark_fmu-v6x_default
-      buildType: MinSizeRel
-      settings:
-        CONFIG: ark_fmu-v6x_default
    atl_mantis-edu_default:
      short: atl_mantis-edu
      buildType: MinSizeRel
@@ -216,16 +196,6 @@ CONFIG:
      buildType: MinSizeRel
      settings:
        CONFIG: matek_h743-slim_default
-    matek_gnss-m9n-f4_canbootloader:
-      short: matek_gnss-m9n-f4_canbootloader
-      buildType: MiniSizeRel
-      settings:
-        CONFIG: matek_m9nf4can_canbootloader
-    matek_gnss-m9n-f4_default:
-      short: matek_gnss-m9n-f4_default
-      buildType: MiniSizeRel
-      settings:
-        CONFIG: matek_gnss-m9n-f4_default
    modalai_fc-v1_default:
      short: modalai_fc-v1
      buildType: MinSizeRel
@@ -236,11 +206,6 @@ CONFIG:
      buildType: MinSizeRel
      settings:
        CONFIG: modalai_fc-v2_default
-    modalai_voxl2-io_default:
-      short: modalai_voxl2-io
-      buildType: MinSizeRel
-      settings:
-        CONFIG: modalai_voxl2-io_default
    mro_ctrl-zero-f7_default:
      short: mro_ctrl-zero-f7
      buildType: MinSizeRel
@@ -126,6 +126,8 @@
        },
        "search.showLineNumbers": true,
        "telemetry.enableTelemetry": false,
+        "terminal.integrated.copyOnSelection": true,
+        "terminal.integrated.rightClickBehavior": "paste",
        "terminal.integrated.scrollback": 5000,
        "window.title": "${dirty} ${activeEditorMedium}${separator}${rootName}",
        "workbench.editor.highlightModifiedTabs": true,
@@ -54,19 +54,17 @@
            "type": "shell",
            "command": "ant create_run_jar copy_res",
            "options": {
-                "cwd": "${workspaceFolder}/Tools/simulation/jmavsim/jMAVSim"
+                "cwd": "${workspaceFolder}/Tools/jMAVSim"
            },
-            "presentation": {
+            "problemMatcher": [],
+            "presentation":{
                "echo": true,
                "reveal": "never",
-                "revealProblems": "onProblem",
                "focus": false,
-                "panel": "dedicated",
+                "panel": "shared",
                "showReuseMessage": false,
                "clear": false,
-                "close": true
-            },
-            "problemMatcher": []
+            }
        },
        {
            "label": "jmavsim",
@@ -74,7 +72,7 @@
            "dependsOn": "jmavsim build",
            "command": "java -Djava.ext.dirs= -jar jmavsim_run.jar -r 250 -lockstep -tcp localhost:4560 -qgc",
            "options": {
-                "cwd": "${workspaceFolder}/Tools/simulation/jmavsim/jMAVSim/out/production",
+                "cwd": "${workspaceFolder}/Tools/jMAVSim/out/production",
                "env": {
                    "PX4_SIM_SPEED_FACTOR": "1"
                }
@@ -83,31 +81,42 @@
            "presentation": {
                "echo": true,
                "reveal": "never",
-                "revealProblems": "onProblem",
                "focus": false,
-                "panel": "dedicated",
+                "panel": "shared",
                "showReuseMessage": false,
-                "clear": false,
-                "close": true
+                "clear": false
            },
-            "problemMatcher": []
+            "problemMatcher": [
+                {
+                    "pattern": [
+                        {
+                            "regexp": ".",
+                            "file": 1,
+                            "location": 2,
+                            "message": 3
+                        }
+                    ],
+                    "background": {
+                        "activeOnStart": true,
+                        "beginsPattern": ".",
+                        "endsPattern": ".",
+                    }
+                }
+            ]
        },
        {
            "label": "jmavsim kill",
            "type": "shell",
-            "command": "kill $(ps aux | grep jmavsim | grep -v 'grep' | awk '{print $2}') || true",
+            "command": "kill $(ps aux | grep jmavsim | grep -v 'grep' | awk '{print $2}')",
            "presentation": {
-                "echo": true,
+                "echo": false,
                "reveal": "never",
-                "revealProblems": "onProblem",
                "focus": false,
-                "panel": "dedicated",
+                "panel": "shared",
                "showReuseMessage": false,
-                "clear": false,
-                "close": true
+                "clear": false
            },
-            "problemMatcher": [],
-            "dependsOn":["px4_sitl_cleanup"]
+            "problemMatcher": []
        },
        {
            "label": "gazebo build",
@@ -116,17 +125,15 @@
            "options": {
                "cwd": "${workspaceFolder}"
            },
-            "presentation": {
+            "problemMatcher": [],
+            "presentation":{
                "echo": true,
-                "reveal": "never",
-                "revealProblems": "onProblem",
+                "reveal": "always",
                "focus": false,
-                "panel": "dedicated",
+                "panel": "shared",
                "showReuseMessage": false,
                "clear": false,
-                "close": true
-            },
-            "problemMatcher": [],
+            }
        },
        {
            "label": "gazebo start",
@@ -136,21 +143,19 @@
                "cwd": "${workspaceFolder}",
                "env": {
                    "GAZEBO_PLUGIN_PATH": "${workspaceFolder}/build/px4_sitl_default/build_gazebo",
-                    "GAZEBO_MODEL_PATH": "${workspaceFolder}/Tools/simulation/gazebo/sitl_gazebo/models",
+                    "GAZEBO_MODEL_PATH": "${workspaceFolder}/Tools/sitl_gazebo/models",
                    "PX4_SIM_SPEED_FACTOR": "1"
                }
            },
-            "command": "gzserver --verbose ${workspaceFolder}/Tools/simulation/gazebo/sitl_gazebo/worlds/empty.world",
+            "command": "gzserver --verbose ${workspaceFolder}/Tools/sitl_gazebo/worlds/${input:gazeboWorld}.world",
            "isBackground": true,
            "presentation": {
                "echo": true,
                "reveal": "never",
-                "revealProblems": "onProblem",
                "focus": false,
-                "panel": "dedicated",
+                "panel": "shared",
                "showReuseMessage": false,
-                "clear": false,
-                "close": true
+                "clear": false
            },
            "problemMatcher": [
                {
@@ -178,21 +183,19 @@
                "cwd": "${workspaceFolder}",
                "env": {
                    "GAZEBO_PLUGIN_PATH": "${workspaceFolder}/build/px4_sitl_default/build_gazebo",
-                    "GAZEBO_MODEL_PATH": "${workspaceFolder}/Tools/simulation/gazebo/sitl_gazebo/models",
+                    "GAZEBO_MODEL_PATH": "${workspaceFolder}/Tools/sitl_gazebo/models",
                    "PX4_SIM_SPEED_FACTOR": "1"
                }
            },
-            "command": "gz model --verbose --spawn-file=${workspaceFolder}/Tools/simulation/gazebo/sitl_gazebo/models/iris/iris.sdf --model-name=iris -x 1.01 -y 0.98 -z 0.83",
+            "command": "gz model --verbose --spawn-file=${workspaceFolder}/Tools/sitl_gazebo/models/${input:vehicleModel}/${input:vehicleModel}.sdf --model-name=${input:vehicleModel} -x 1.01 -y 0.98 -z 0.83",
            "isBackground": false,
            "presentation": {
                "echo": true,
                "reveal": "never",
-                "revealProblems": "onProblem",
                "focus": false,
-                "panel": "dedicated",
+                "panel": "shared",
                "showReuseMessage": false,
-                "clear": false,
-                "close": true
+                "clear": false
            },
            "problemMatcher": [
                {
@@ -213,77 +216,71 @@
            ]
        },
        {
-            "label": "ign gazebo",
+            "label": "gazebo client",
            "type": "shell",
+            "dependsOn": "gazebo build",
            "options": {
                "cwd": "${workspaceFolder}",
                "env": {
-                    "IGN_GAZEBO_RESOURCE_PATH": "${workspaceFolder}/Tools/simulation/gz/models",
+                    "GAZEBO_PLUGIN_PATH": "${workspaceFolder}/build/px4_sitl_default/build_gazebo",
+                    "GAZEBO_MODEL_PATH": "${workspaceFolder}/Tools/sitl_gazebo/models",
+                    "PX4_SIM_SPEED_FACTOR": "1"
                }
            },
-            "command": "ign gazebo -v 4 -r ${workspaceFolder}/Tools/simulation/gz/worlds/${input:gzWorld}.sdf",
+            "command": "gzclient --verbose",
            "isBackground": true,
            "presentation": {
                "echo": true,
-                "reveal": "always",
-                "revealProblems": "onProblem",
-                "focus": true,
-                "panel": "dedicated",
+                "reveal": "never",
+                "focus": false,
+                "panel": "shared",
                "showReuseMessage": false,
-                "clear": false,
-                "close": false
+                "clear": false
            },
-            "problemMatcher": [],
-            "dependsOn":["ign gazebo kill"]
+            "problemMatcher": [
+                {
+                    "pattern": [
+                        {
+                            "regexp": ".",
+                            "file": 1,
+                            "location": 2,
+                            "message": 3
+                        }
+                    ],
+                    "background": {
+                        "activeOnStart": true,
+                        "beginsPattern": ".",
+                        "endsPattern": ".",
+                    }
+                }
+            ]
        },
        {
            "label": "gazebo kill",
            "type": "shell",
-            "command": "pkill -9 -f gzserver || true",
+            "command": "killall gzserver",
            "presentation": {
                "echo": true,
-                "reveal": "never",
-                "revealProblems": "onProblem",
+                "reveal": "silent",
                "focus": false,
-                "panel": "dedicated",
+                "panel": "shared",
                "showReuseMessage": false,
-                "clear": false,
-                "close": true
+                "clear": false
            },
            "problemMatcher": [],
            "dependsOn":["px4_sitl_cleanup"]
        },
-        {
-            "label": "ign gazebo kill",
-            "type": "shell",
-            "command": "pkill -9 -f 'ign gazebo' || true",
-            "presentation": {
-                "echo": true,
-                "reveal": "never",
-                "revealProblems": "onProblem",
-                "focus": false,
-                "panel": "dedicated",
-                "showReuseMessage": false,
-                "clear": false,
-                "close": true
-            },
-            "problemMatcher": [],
-            "dependsOn":["px4_sitl_cleanup"]
-        },
-
        {
            "label": "px4_sitl_cleanup",
            "type": "shell",
-            "command": "rm -rfv /tmp/px4* || true",
+            "command": "rm -rfv /tmp/px4*",
            "presentation": {
                "echo": true,
-                "reveal": "never",
-                "revealProblems": "onProblem",
+                "reveal": "silent",
                "focus": false,
-                "panel": "dedicated",
+                "panel": "shared",
                "showReuseMessage": false,
-                "clear": false,
-                "close": true
+                "clear": false
            },
            "problemMatcher": [],
            "dependsOn":["px4_kill"]
@@ -291,16 +288,14 @@
        {
            "label": "px4_kill",
            "type": "shell",
-            "command": "pkill -9 px4 || true",
+            "command": "killall px4 || true",
            "presentation": {
                "echo": true,
-                "reveal": "never",
-                "revealProblems": "onProblem",
+                "reveal": "silent",
                "focus": false,
-                "panel": "dedicated",
+                "panel": "shared",
                "showReuseMessage": false,
-                "clear": false,
-                "close": true
+                "clear": false
            },
            "problemMatcher": []
        },
@@ -342,12 +337,37 @@
    "inputs": [
        {
            "type": "pickString",
-            "id": "gzWorld",
-            "description": "gz world",
+            "id": "vehicleModel",
+            "description": "gazebo model",
            "options": [
-                "default"
+              "iris",
+              "typhoon_h480",
+              "plane",
+              "plane_catapult",
+              "plane_lidar",
+              "standard_vtol",
+              "tailsitter",
+              "tiltrotor",
+              "r1_rover",
+              "boat"
            ],
-            "default": "default"
+            "default": "iris"
+        },
+        {
+            "type": "pickString",
+            "id": "gazeboWorld",
+            "description": "gazebo world",
+            "options": [
+                "baylands",
+                "empty",
+                "ksql_airport",
+                "mcmillan_airfield",
+                "sonoma_raceway",
+                "warehouse",
+                "windy",
+                "yosemite"
+            ],
+            "default": "empty"
        }
    ]
 }
@@ -99,7 +99,7 @@
 #
 #=============================================================================

-cmake_minimum_required(VERSION 3.9 FATAL_ERROR)
+cmake_minimum_required(VERSION 3.2 FATAL_ERROR)

 set(PX4_SOURCE_DIR "${CMAKE_CURRENT_SOURCE_DIR}" CACHE FILEPATH "PX4 source directory" FORCE)
 set(PX4_BINARY_DIR "${CMAKE_CURRENT_BINARY_DIR}" CACHE FILEPATH "PX4 binary directory" FORCE)
@@ -125,11 +125,6 @@ define_property(GLOBAL PROPERTY PX4_MODULE_LIBRARIES
                 FULL_DOCS "List of all PX4 module libraries"
                 )

-define_property(GLOBAL PROPERTY PX4_KERNEL_MODULE_LIBRARIES
-                 BRIEF_DOCS "PX4 kernel side module libs"
-                 FULL_DOCS "List of all PX4 kernel module libraries"
-                 )
-
 define_property(GLOBAL PROPERTY PX4_MODULE_PATHS
                 BRIEF_DOCS "PX4 module paths"
                 FULL_DOCS "List of paths to all PX4 modules"
@@ -147,7 +142,6 @@ set(CONFIG "px4_sitl_default" CACHE STRING "desired configuration")

 include(px4_add_module)
 set(config_module_list)
-set(config_kernel_list)

 # Find Python
 # If using catkin, Python 2 is found since it points
@@ -175,12 +169,6 @@ include(kconfig)
 message(STATUS "PX4 config: ${PX4_CONFIG}")
 message(STATUS "PX4 platform: ${PX4_PLATFORM}")

-if($ENV{CLION_IDE})
-	# CLion automatically executes some compiler commands after configuring the
-	# project. This would fail on NuttX, as visibility.h tries to (indirectly)
-	# include nuttx/config.h, which at that point does not exist yet
-	add_definitions(-DPX4_DISABLE_GCC_POISON)
-endif()

 if(${PX4_PLATFORM} STREQUAL "posix")
 	if(ENABLE_LOCKSTEP_SCHEDULER)
@@ -240,14 +228,6 @@ message(STATUS "cmake build type: ${CMAKE_BUILD_TYPE}")
 #
 project(px4 CXX C ASM)

-# Check if LTO option and check if toolchain supports it
-if(LTO)
-    include(CheckIPOSupported)
-    check_ipo_supported()
-    message(AUTHOR_WARNING "LTO enabled: LTO is highly experimental and should not be used in production")
-    set(CMAKE_INTERPROCEDURAL_OPTIMIZATION TRUE)
-endif()
-
 set(package-contact "px4users@googlegroups.com")

 set(CMAKE_CXX_STANDARD 14)
@@ -410,10 +390,11 @@ if(BUILD_TESTING)
 	include(gtest)

 	add_custom_target(test_results
-			COMMAND GTEST_COLOR=1 ${CMAKE_CTEST_COMMAND} --output-on-failure -T Test -R \"${TESTFILTER}\" USES_TERMINAL
+			COMMAND GTEST_COLOR=1 ${CMAKE_CTEST_COMMAND} --output-on-failure -T Test -R ${TESTFILTER} USES_TERMINAL
 			DEPENDS
 				px4
 				examples__dyn_hello
+				test_mixer_multirotor
 			USES_TERMINAL
 			COMMENT "Running tests"
 			WORKING_DIRECTORY ${PX4_BINARY_DIR})
@@ -425,7 +406,6 @@ endif()
 # subdirectories
 #
 add_library(parameters_interface INTERFACE)
-add_library(kernel_parameters_interface INTERFACE)

 include(px4_add_library)
 add_subdirectory(src/lib EXCLUDE_FROM_ALL)
@@ -448,13 +428,7 @@ add_subdirectory(src/lib/metadata EXCLUDE_FROM_ALL)

 # must be the last module before firmware
 add_subdirectory(src/lib/parameters EXCLUDE_FROM_ALL)
-
-if(${PX4_PLATFORM} STREQUAL "nuttx" AND NOT CONFIG_BUILD_FLAT)
-target_link_libraries(parameters_interface INTERFACE usr_parameters)
-target_link_libraries(kernel_parameters_interface INTERFACE parameters)
-else()
 target_link_libraries(parameters_interface INTERFACE parameters)
-endif()

 # firmware added last to generate the builtin for included modules
 add_subdirectory(platforms/${PX4_PLATFORM})
@@ -8,7 +8,7 @@ First [fork and clone](https://help.github.com/articles/fork-a-repo) the project

 ### Create a feature branch

-*Always* branch off main for new features.
+*Always* branch off master for new features.

 ```
 git checkout -b mydescriptivebranchname
@@ -16,7 +16,7 @@ git checkout -b mydescriptivebranchname

 ### Edit and build the code

-The [developer guide](https://docs.px4.io/main/en/development/development.html) explains how to set up the development environment on Mac OS, Linux or Windows. Please take note of our [coding style](https://docs.px4.io/main/en/contribute/code.html) when editing files.
+The [developer guide](http://dev.px4.io/) explains how to set up the development environment on Mac OS, Linux or Windows. Please take note of our [coding style](https://dev.px4.io/master/en/contribute/code.html) when editing files.

 ### Commit your changes

@@ -829,6 +829,7 @@ RECURSIVE              = YES
 # run.

 EXCLUDE                = @CMAKE_SOURCE_DIR@/src/modules/uavcan/libuavcan \
+                         @CMAKE_SOURCE_DIR@/src/modules/micrortps_bridge/micro-CDR \
                         @CMAKE_SOURCE_DIR@/src/examples \
                         @CMAKE_SOURCE_DIR@/src/templates

@@ -7,19 +7,88 @@ pipeline {
    stage('Analysis') {
      when {
        anyOf {
-          branch 'main'
-          branch 'master' // should be removed, but in case there is something going on...
+          branch 'master'
          branch 'pr-jenkins' // for testing
        }
      }
      parallel {
+        // stage('Catkin build on ROS workspace') {
+        //   agent {
+        //     docker {
+        //       image 'px4io/px4-dev-ros-melodic:2021-08-18'
+        //       args '-e CCACHE_BASEDIR=$WORKSPACE -v ${CCACHE_DIR}:${CCACHE_DIR}:rw -e HOME=$WORKSPACE'
+        //     }
+        //   }
+        //   steps {
+        //     sh 'ls -l'
+        //     sh '''#!/bin/bash -l
+        //       echo $0;
+        //       mkdir -p catkin_ws/src;
+        //       cd catkin_ws;
+        //       git -C ${WORKSPACE}/catkin_ws/src/Firmware submodule update --init --recursive --force Tools/sitl_gazebo
+        //       git clone --recursive ${WORKSPACE}/catkin_ws/src/Firmware/Tools/sitl_gazebo src/mavlink_sitl_gazebo;
+        //       git -C ${WORKSPACE}/catkin_ws/src/Firmware fetch --tags;
+        //       source /opt/ros/melodic/setup.bash;
+        //       export PYTHONPATH=/opt/ros/$ROS_DISTRO/lib/python2.7/dist-packages:/usr/lib/python2.7/dist-packages:/usr/local/lib/python2.7/dist-packages;
+        //       catkin init;
+        //       catkin build -j$(nproc) -l$(nproc);
+        //     '''
+        //     // test if the binary was correctly installed and runs using 'mavros_posix_silt.launch'
+        //     sh '''#!/bin/bash -l
+        //       echo $0;
+        //       source catkin_ws/devel/setup.bash;
+        //       rostest px4 pub_test.launch;
+        //     '''
+        //   }
+        //   post {
+        //     always {
+        //       sh 'rm -rf catkin_ws'
+        //     }
+        //     failure {
+        //       archiveArtifacts(allowEmptyArchive: false, artifacts: '.ros/**/*.xml, .ros/**/*.log')
+        //     }
+        //   }
+        //   options {
+        //     checkoutToSubdirectory('catkin_ws/src/Firmware')
+        //   }
+        // }
+
+        stage('Colcon build on ROS2 workspace') {
+          agent {
+            docker {
+              image 'px4io/px4-dev-ros2-foxy:2021-08-18'
+              args '-e CCACHE_BASEDIR=$WORKSPACE -v ${CCACHE_DIR}:${CCACHE_DIR}:rw -e HOME=$WORKSPACE'
+            }
+          }
+          steps {
+            sh 'ls -l'
+            sh '''#!/bin/bash -l
+              echo $0;
+              unset ROS_DISTRO;
+              mkdir -p colcon_ws/src;
+              cd colcon_ws;
+              git -C ${WORKSPACE}/colcon_ws/src/Firmware submodule update --init --recursive --force Tools/sitl_gazebo;
+              git -C ${WORKSPACE}/colcon_ws/src/Firmware fetch --tags;
+              source /opt/ros/foxy/setup.sh;
+              colcon build --event-handlers console_direct+ --symlink-install;
+            '''
+          }
+          post {
+            always {
+              sh 'rm -rf colcon_ws'
+            }
+          }
+          options {
+            checkoutToSubdirectory('colcon_ws/src/Firmware')
+          }
+        }

        stage('Airframe') {
          agent {
            docker { image 'px4io/px4-dev-base-focal:2021-08-18' }
          }
          steps {
-            sh 'make distclean; git clean -ff -x -d .'
+            sh 'make distclean'
            sh 'git fetch --all --tags'
            sh 'make airframe_metadata'
            dir('build/px4_sitl_default/docs') {
@@ -29,7 +98,7 @@ pipeline {
          }
          post {
            always {
-              sh 'make distclean; git clean -ff -x -d .'
+              sh 'make distclean'
            }
          }
        }
@@ -39,7 +108,7 @@ pipeline {
            docker { image 'px4io/px4-dev-base-focal:2021-08-18' }
          }
          steps {
-            sh 'make distclean; git clean -ff -x -d .'
+            sh 'make distclean'
            sh 'git fetch --all --tags'
            sh 'make parameters_metadata'
            dir('build/px4_sitl_default/docs') {
@@ -49,7 +118,7 @@ pipeline {
          }
          post {
            always {
-              sh 'make distclean; git clean -ff -x -d .'
+              sh 'make distclean'
            }
          }
        }
@@ -59,7 +128,7 @@ pipeline {
            docker { image 'px4io/px4-dev-base-focal:2021-08-18' }
          }
          steps {
-            sh 'make distclean; git clean -ff -x -d .'
+            sh 'make distclean'
            sh 'git fetch --all --tags'
            sh 'make module_documentation'
            dir('build/px4_sitl_default/docs') {
@@ -69,7 +138,7 @@ pipeline {
          }
          post {
            always {
-              sh 'make distclean; git clean -ff -x -d .'
+              sh 'make distclean'
            }
          }
        }
@@ -79,7 +148,7 @@ pipeline {
            docker { image 'px4io/px4-dev-base-focal:2021-08-18' }
          }
          steps {
-            sh 'mkdir -p build/msg_docs; ./Tools/msg/generate_msg_docs.py -d build/msg_docs'
+            sh 'mkdir -p build/msg_docs; ./msg/tools/generate_msg_docs.py -d build/msg_docs'
            dir('build') {
              archiveArtifacts(artifacts: 'msg_docs/*.md')
              stash includes: 'msg_docs/*.md', name: 'msg_documentation'
@@ -87,36 +156,7 @@ pipeline {
          }
          post {
            always {
-              sh 'make distclean; git clean -ff -x -d .'
-            }
-          }
-        }
-
-        stage('failsafe docs') {
-          agent {
-            docker { image 'px4io/px4-dev-base-focal:2021-08-18' }
-          }
-          steps {
-            sh '''#!/bin/bash -l
-			echo $0;
-            git clone https://github.com/emscripten-core/emsdk.git _emscripten_sdk;
-            cd _emscripten_sdk;
-            ./emsdk install latest;
-            ./emsdk activate latest;
-            . ./_emscripten_sdk/emsdk_env.sh;
-			make failsafe_web;
-			cd build/px4_sitl_default_failsafe_web;
-			mkdir -p failsafe_sim;
-			cp index.* parameters.json failsafe_sim;
-			'''
-            dir('build/px4_sitl_default_failsafe_web') {
-              archiveArtifacts(artifacts: 'failsafe_sim/*')
-              stash includes: 'failsafe_sim/*', name: 'failsafe_sim'
-            }
-          }
-          post {
-            always {
-              sh 'make distclean; git clean -ff -x -d .'
+              sh 'make distclean'
            }
          }
        }
@@ -130,7 +170,7 @@ pipeline {
          }
          steps {
            sh 'export'
-            sh 'make distclean; git clean -ff -x -d .'
+            sh 'make distclean'
            sh 'git fetch --all --tags'
            sh 'make uorb_graphs'
            dir('Tools/uorb_graph') {
@@ -140,7 +180,7 @@ pipeline {
          }
          post {
            always {
-              sh 'make distclean; git clean -ff -x -d .'
+              sh 'make distclean'
            }
          }
        }
@@ -162,25 +202,22 @@ pipeline {
            unstash 'metadata_parameters'
            unstash 'metadata_module_documentation'
            unstash 'msg_documentation'
-            unstash 'failsafe_sim'
            unstash 'uorb_graph'
            withCredentials([usernamePassword(credentialsId: 'px4buildbot_github_personal_token', passwordVariable: 'GIT_PASS', usernameVariable: 'GIT_USER')]) {
-              sh('git clone https://${GIT_USER}:${GIT_PASS}@github.com/PX4/PX4-user_guide.git')
-              sh('cp airframes.md PX4-user_guide/en/airframes/airframe_reference.md')
-              sh('cp parameters.md PX4-user_guide/en/advanced_config/parameter_reference.md')
-              sh('cp -R modules/*.md PX4-user_guide/en/modules/')
-              sh('cp -R graph_*.json PX4-user_guide/.vuepress/public/en/middleware/')
-              sh('cp -R msg_docs/*.md PX4-user_guide/en/msg_docs/')
-              sh('cp -R failsafe_sim/* PX4-user_guide/.vuepress/public/en/config/failsafe')
-              sh('cd PX4-user_guide; git status; git add .; git commit -a -m "Update PX4 Firmware metadata `date`" || true')
-              sh('cd PX4-user_guide; git push origin main || true')
-              sh('rm -rf PX4-user_guide')
+              sh('git clone https://${GIT_USER}:${GIT_PASS}@github.com/PX4/px4_user_guide.git')
+              sh('cp airframes.md px4_user_guide/en/airframes/airframe_reference.md')
+              sh('cp parameters.md px4_user_guide/en/advanced_config/parameter_reference.md')
+              sh('cp -R modules/*.md px4_user_guide/en/modules/')
+              sh('cp -R graph_*.json px4_user_guide/.vuepress/public/en/middleware/')
+              sh('cp -R msg_docs/*.md px4_user_guide/en/msg_docs/')
+              sh('cd px4_user_guide; git status; git add .; git commit -a -m "Update PX4 Firmware metadata `date`" || true')
+              sh('cd px4_user_guide; git push origin master || true')
+              sh('rm -rf px4_user_guide')
            }
          }
          when {
            anyOf {
-              branch 'main'
-              branch 'master' // should be removed, but in case there is something going on...
+              branch 'master'
              branch 'pr-jenkins' // for testing
            }
          }
@@ -208,8 +245,7 @@ pipeline {
          }
          when {
            anyOf {
-              branch 'main'
-              branch 'master' // should be removed, but in case there is something going on...
+              branch 'master'
              branch 'pr-jenkins' // for testing
            }
          }
@@ -218,26 +254,104 @@ pipeline {
          }
        }

+        stage('microRTPS agent') {
+          agent {
+            docker { image 'px4io/px4-dev-base-focal:2021-08-18' }
+          }
+          steps {
+            sh('export')
+            sh('git fetch --all --tags')
+            sh('make distclean')
+            sh('make px4_sitl_rtps')
+            withCredentials([usernamePassword(credentialsId: 'px4buildbot_github_personal_token', passwordVariable: 'GIT_PASS', usernameVariable: 'GIT_USER')]) {
+              sh("git clone https://${GIT_USER}:${GIT_PASS}@github.com/PX4/micrortps_agent.git -b ${BRANCH_NAME}")
+              sh("rm -rf micrortps_agent/src micrortps_agent/idl")
+              sh('cp -R build/px4_sitl_rtps/src/modules/micrortps_bridge/micrortps_agent/* micrortps_agent')
+              sh('cd micrortps_agent; git status; git add src; git commit -a -m "Update microRTPS agent source code `date`" || true')
+              sh('cd micrortps_agent; git push origin ${BRANCH_NAME} || true')
+              sh('cd micrortps_agent; git status; git add idl; git commit -a -m "Update IDL definitions `date`" || true')
+              sh('cd micrortps_agent; git push origin ${BRANCH_NAME} || true')
+              sh('cd micrortps_agent; git status; git add CMakeLists.txt; git commit -a -m "Update CMakeLists.txt `date`" || true')
+              sh('cd micrortps_agent; git push origin ${BRANCH_NAME} || true')
+              sh('rm -rf micrortps_agent')
+            }
+          }
+          when {
+            anyOf {
+              branch 'master'
+              branch 'pr-jenkins' // for testing
+            }
+          }
+        }
+
        stage('PX4 ROS msgs') {
          agent {
            docker { image 'px4io/px4-dev-base-focal:2021-08-18' }
          }
          steps {
            sh('export')
-            sh('make distclean; git clean -ff -x -d .')
+            sh('make distclean')
            withCredentials([usernamePassword(credentialsId: 'px4buildbot_github_personal_token', passwordVariable: 'GIT_PASS', usernameVariable: 'GIT_USER')]) {
              sh("git clone https://${GIT_USER}:${GIT_PASS}@github.com/PX4/px4_msgs.git")
-              // 'main' branch
-              sh('rm -f px4_msgs/msg/*.msg')
-              sh('cp msg/*.msg px4_msgs/msg/')
+              // 'master' branch
+              sh('./msg/tools/uorb_to_ros_msgs.py msg/ px4_msgs/msg/')
              sh('cd px4_msgs; git status; git add .; git commit -a -m "Update message definitions `date`" || true')
-              sh('cd px4_msgs; git push origin main || true')
+              sh('cd px4_msgs; git push origin master || true')
+              // 'ros1' branch
+              sh('cd px4_msgs; git checkout ros1')
+              sh('./msg/tools/uorb_to_ros_msgs.py msg/ px4_msgs/msg/')
+              sh('cd px4_msgs; git status; git add .; git commit -a -m "Update message definitions `date`" || true')
+              sh('cd px4_msgs; git push origin ros1 || true')
              sh('rm -rf px4_msgs')
            }
          }
          when {
            anyOf {
-              branch 'main'
+              branch 'master'
+              branch 'pr-jenkins' // for testing
+            }
+          }
+        }
+
+        stage('PX4 ROS2 bridge') {
+          agent {
+            docker { image 'px4io/px4-dev-base-focal:2021-08-18' }
+          }
+          steps {
+            sh('export')
+            sh('make distclean')
+            withCredentials([usernamePassword(credentialsId: 'px4buildbot_github_personal_token', passwordVariable: 'GIT_PASS', usernameVariable: 'GIT_USER')]) {
+              sh("git clone https://${GIT_USER}:${GIT_PASS}@github.com/PX4/px4_ros_com.git -b ${BRANCH_NAME}")
+              // deploy uORB RTPS ID map
+              sh('./msg/tools/uorb_to_ros_urtps_topics.py -i msg/tools/urtps_bridge_topics.yaml -o px4_ros_com/templates/urtps_bridge_topics.yaml')
+              sh('cd px4_ros_com; git status; git add .; git commit -a -m "Update uORB RTPS ID map `date`" || true')
+              sh('cd px4_ros_com; git push origin ${BRANCH_NAME} || true')
+              // deploy uORB RTPS required tools
+              sh('cp msg/tools/uorb_rtps_classifier.py px4_ros_com/scripts/uorb_rtps_classifier.py')
+              sh('cp msg/tools/generate_microRTPS_bridge.py px4_ros_com/scripts/generate_microRTPS_bridge.py')
+              sh('cp msg/tools/px_generate_uorb_topic_files.py px4_ros_com/scripts/px_generate_uorb_topic_files.py')
+              sh('cp msg/tools/px_generate_uorb_topic_helper.py px4_ros_com/scripts/px_generate_uorb_topic_helper.py')
+              // deploy templates
+              sh('cp msg/templates/urtps/microRTPS_agent.cpp.em px4_ros_com/templates/microRTPS_agent.cpp.em')
+              sh('cp msg/templates/urtps/microRTPS_timesync.cpp.em px4_ros_com/templates/microRTPS_timesync.cpp.em')
+              sh('cp msg/templates/urtps/microRTPS_timesync.h.em px4_ros_com/templates/microRTPS_timesync.h.em')
+              sh('cp msg/templates/urtps/microRTPS_transport.cpp px4_ros_com/templates/microRTPS_transport.cpp')
+              sh('cp msg/templates/urtps/microRTPS_transport.h px4_ros_com/templates/microRTPS_transport.h')
+              sh('cp msg/templates/urtps/Publisher.cpp.em px4_ros_com/templates/Publisher.cpp.em')
+              sh('cp msg/templates/urtps/Publisher.h.em px4_ros_com/templates/Publisher.h.em')
+              sh('cp msg/templates/urtps/Subscriber.cpp.em px4_ros_com/templates/Subscriber.cpp.em')
+              sh('cp msg/templates/urtps/Subscriber.h.em px4_ros_com/templates/Subscriber.h.em')
+              sh('cp msg/templates/urtps/RtpsTopics.cpp.em px4_ros_com/templates/RtpsTopics.cpp.em')
+              sh('cp msg/templates/urtps/RtpsTopics.h.em px4_ros_com/templates/RtpsTopics.h.em')
+              sh('cd px4_ros_com; git status; git add .; git commit -a -m "Update uORB RTPS script tools `date`" || true')
+              sh('cd px4_ros_com; git push origin ${BRANCH_NAME} || true')
+              sh('rm -rf px4_msgs')
+            }
+          }
+          when {
+            anyOf {
+              branch 'master'
+              branch 'pr-jenkins' // for testing
            }
          }
        }
@@ -259,8 +373,7 @@ pipeline {
          }
          when {
            anyOf {
-              branch 'main'
-              branch 'master' // should be removed, but in case there is something going on...
+              branch 'master'
              branch 'pr-jenkins' // for testing
            }
          }
@@ -51,13 +51,6 @@ menu "Toolchain"
        string "Architecture"
        default ""

-    config BOARD_LTO
-        bool "(EXPERIMENTAL) Link Time Optimization (LTO)"
-        default n
-        help
-            Enables LTO flag in linker
-            Note: Highly EXPERIMENTAL, furthermore make sure you're using a modern compiler GCC 9 or later
-
    config BOARD_FULL_OPTIMIZATION
        bool "Full optmization (O3)"
        default n
@@ -125,11 +118,6 @@ config BOARD_CRYPTO
    help
        Enable PX4 Crypto Support. Select the implementation under drivers

-config BOARD_PROTECTED
-    bool "Memory protection"
-    help
-        Enable memory protection via MPU/MMU
-
 menu "Serial ports"

    config BOARD_SERIAL_URT6
@@ -1,6 +1,6 @@
 BSD 3-Clause License

-Copyright (c) 2012 - 2022, PX4 Development Team
+Copyright (c) 2012 - 2021, PX4 Development Team
 All rights reserved.

 Redistribution and use in source and binary forms, with or without
@@ -129,54 +129,52 @@ else
 	BUILD_DIR_SUFFIX :=
 endif

-CMAKE_ARGS ?=
-
 # additional config parameters passed to cmake
 ifdef EXTERNAL_MODULES_LOCATION
-	override CMAKE_ARGS += -DEXTERNAL_MODULES_LOCATION:STRING=$(EXTERNAL_MODULES_LOCATION)
+	CMAKE_ARGS += -DEXTERNAL_MODULES_LOCATION:STRING=$(EXTERNAL_MODULES_LOCATION)
 endif

 ifdef PX4_CMAKE_BUILD_TYPE
-	override CMAKE_ARGS += -DCMAKE_BUILD_TYPE=${PX4_CMAKE_BUILD_TYPE}
+	CMAKE_ARGS += -DCMAKE_BUILD_TYPE=${PX4_CMAKE_BUILD_TYPE}
 else

 	# Address Sanitizer
 	ifdef PX4_ASAN
-		override CMAKE_ARGS += -DCMAKE_BUILD_TYPE=AddressSanitizer
+		CMAKE_ARGS += -DCMAKE_BUILD_TYPE=AddressSanitizer
 	endif

 	# Memory Sanitizer
 	ifdef PX4_MSAN
-		override CMAKE_ARGS += -DCMAKE_BUILD_TYPE=MemorySanitizer
+		CMAKE_ARGS += -DCMAKE_BUILD_TYPE=MemorySanitizer
 	endif

 	# Thread Sanitizer
 	ifdef PX4_TSAN
-		override CMAKE_ARGS += -DCMAKE_BUILD_TYPE=ThreadSanitizer
+		CMAKE_ARGS += -DCMAKE_BUILD_TYPE=ThreadSanitizer
 	endif

 	# Undefined Behavior Sanitizer
 	ifdef PX4_UBSAN
-		override CMAKE_ARGS += -DCMAKE_BUILD_TYPE=UndefinedBehaviorSanitizer
-	endif
-
-	# Fuzz Testing
-	ifdef PX4_FUZZ
-		override CMAKE_ARGS += -DCMAKE_BUILD_TYPE=FuzzTesting
+		CMAKE_ARGS += -DCMAKE_BUILD_TYPE=UndefinedBehaviorSanitizer
 	endif

 endif

 # Pick up specific Python path if set
 ifdef PYTHON_EXECUTABLE
-	override CMAKE_ARGS += -DPYTHON_EXECUTABLE=${PYTHON_EXECUTABLE}
+	CMAKE_ARGS += -DPYTHON_EXECUTABLE=${PYTHON_EXECUTABLE}
+endif
+
+# Check if the microRTPS agent is to be built
+ifdef BUILD_MICRORTPS_AGENT
+  CMAKE_ARGS += -DBUILD_MICRORTPS_AGENT=ON
 endif

 # Functions
 # --------------------------------------------------------------------
 # describe how to build a cmake config
 define cmake-build
-	$(eval override CMAKE_ARGS += -DCONFIG=$(1))
+	$(eval CMAKE_ARGS += -DCONFIG=$(1))
 	@$(eval BUILD_DIR = "$(SRC_DIR)/build/$(1)")
 	@# check if the desired cmake configuration matches the cache then CMAKE_CACHE_CHECK stays empty
 	@$(call cmake-cache-check)
@@ -248,7 +246,7 @@ endef
 # Other targets
 # --------------------------------------------------------------------

-.PHONY: qgc_firmware px4fmu_firmware misc_qgc_extra_firmware
+.PHONY: qgc_firmware px4fmu_firmware misc_qgc_extra_firmware check_rtps

 # QGroundControl flashable NuttX firmware
 qgc_firmware: px4fmu_firmware misc_qgc_extra_firmware
@@ -273,7 +271,15 @@ misc_qgc_extra_firmware: \
 	check_airmind_mindpx-v2_default \
 	sizes

-.PHONY: sizes check quick_check uorb_graphs
+# builds with RTPS
+check_rtps: \
+	check_px4_fmu-v3_rtps \
+	check_px4_fmu-v4_rtps \
+	check_px4_fmu-v4pro_rtps \
+	check_px4_sitl_rtps \
+	sizes
+
+.PHONY: sizes check quick_check check_rtps uorb_graphs

 sizes:
 	@-find build -name *.elf -type f | xargs size 2> /dev/null || :
@@ -303,14 +309,10 @@ uorb_graphs:
 	@$(MAKE) --no-print-directory px4_fmu-v5_default uorb_graph
 	@$(MAKE) --no-print-directory px4_sitl_default uorb_graph

-px4io_update:
-	@$(MAKE) --no-print-directory px4_io-v2_default
-	@$(MAKE) --no-print-directory cubepilot_io-v2_default
+px4io_update: px4_io-v2_default cubepilot_io-v2_default
 	# px4_io-v2_default
-	cp build/px4_io-v2_default/px4_io-v2_default.bin boards/ark/fmu-v6x/extras/px4_io-v2_default.bin
 	cp build/px4_io-v2_default/px4_io-v2_default.bin boards/holybro/durandal-v1/extras/px4_io-v2_default.bin
 	cp build/px4_io-v2_default/px4_io-v2_default.bin boards/holybro/pix32v5/extras/px4_io-v2_default.bin
-	cp build/px4_io-v2_default/px4_io-v2_default.bin boards/mro/x21/extras/px4_io-v2_default.bin
 	cp build/px4_io-v2_default/px4_io-v2_default.bin boards/mro/x21-777/extras/px4_io-v2_default.bin
 	cp build/px4_io-v2_default/px4_io-v2_default.bin boards/px4/fmu-v2/extras/px4_io-v2_default.bin
 	cp build/px4_io-v2_default/px4_io-v2_default.bin boards/px4/fmu-v3/extras/px4_io-v2_default.bin
@@ -318,13 +320,12 @@ px4io_update:
 	cp build/px4_io-v2_default/px4_io-v2_default.bin boards/px4/fmu-v5/extras/px4_io-v2_default.bin
 	cp build/px4_io-v2_default/px4_io-v2_default.bin boards/px4/fmu-v5x/extras/px4_io-v2_default.bin
 	cp build/px4_io-v2_default/px4_io-v2_default.bin boards/px4/fmu-v6x/extras/px4_io-v2_default.bin
-	cp build/px4_io-v2_default/px4_io-v2_default.bin boards/px4/fmu-v6c/extras/px4_io-v2_default.bin
 	# cubepilot_io-v2_default
 	cp build/cubepilot_io-v2_default/cubepilot_io-v2_default.bin boards/cubepilot/cubeorange/extras/cubepilot_io-v2_default.bin
 	cp build/cubepilot_io-v2_default/cubepilot_io-v2_default.bin boards/cubepilot/cubeyellow/extras/cubepilot_io-v2_default.bin
 	git status

-bootloaders_update: ark_fmu-v6x_bootloader cuav_nora_bootloader cuav_x7pro_bootloader cubepilot_cubeorange_bootloader holybro_durandal-v1_bootloader holybro_kakuteh7_bootloader matek_h743_bootloader matek_h743-mini_bootloader matek_h743-slim_bootloader modalai_fc-v2_bootloader mro_ctrl-zero-classic_bootloader mro_ctrl-zero-h7_bootloader mro_ctrl-zero-h7-oem_bootloader mro_pixracerpro_bootloader px4_fmu-v6c_bootloader px4_fmu-v6u_bootloader px4_fmu-v6x_bootloader
+bootloaders_update: cuav_nora_bootloader cuav_x7pro_bootloader cubepilot_cubeorange_bootloader holybro_durandal-v1_bootloader matek_h743-slim_bootloader modalai_fc-v2_bootloader mro_ctrl-zero-h7_bootloader mro_ctrl-zero-h7-oem_bootloader mro_pixracerpro_bootloader px4_fmu-v6u_bootloader px4_fmu-v6x_bootloader
 	git status

 .PHONY: coverity_scan
@@ -374,7 +375,7 @@ format:
 .PHONY: rostest python_coverage

 tests:
-	$(eval override CMAKE_ARGS += -DTESTFILTER=$(TESTFILTER))
+	$(eval CMAKE_ARGS += -DTESTFILTER=$(TESTFILTER))
 	$(eval ARGS += test_results)
 	$(eval ASAN_OPTIONS += color=always:check_initialization_order=1:detect_stack_use_after_return=1)
 	$(eval UBSAN_OPTIONS += color=always)
@@ -386,8 +387,6 @@ tests_coverage:
 	@mkdir -p coverage
 	@lcov --directory build/px4_sitl_test --base-directory build/px4_sitl_test --gcov-tool gcov --capture -o coverage/lcov.info

-test_unit:
-	@$(MAKE) tests TESTFILTER="unit\|functional"

 rostest: px4_sitl_default
 	@$(MAKE) --no-print-directory px4_sitl_default sitl_gazebo
@@ -483,11 +482,7 @@ shellcheck_all:
 	@make px4_fmu-v5_default shellcheck

 validate_module_configs:
-	@find "$(SRC_DIR)"/src/modules "$(SRC_DIR)"/src/drivers "$(SRC_DIR)"/src/lib -name *.yaml -type f \
-	-not -path "$(SRC_DIR)/src/lib/mixer_module/*" \
-	-not -path "$(SRC_DIR)/src/modules/microdds_client/dds_topics.yaml" \
-	-not -path "$(SRC_DIR)/src/lib/crypto/libtommath/*" -print0 | \
-	xargs -0 "$(SRC_DIR)"/Tools/validate_yaml.py --schema-file "$(SRC_DIR)"/validation/module_schema.yaml
+	@find "$(SRC_DIR)"/src/modules "$(SRC_DIR)"/src/drivers "$(SRC_DIR)"/src/lib -name *.yaml -type f -not -path "$(SRC_DIR)/src/lib/mixer_module/*" -print0 | xargs -0 "$(SRC_DIR)"/Tools/validate_yaml.py --schema-file "$(SRC_DIR)"/validation/module_schema.yaml

 # Cleanup
 # --------------------------------------------------------------------
@@ -552,12 +547,17 @@ check_px4: $(call make_list,nuttx,"px4") \
 check_nxp: $(call make_list,nuttx,"nxp") \
 	sizes

-.PHONY: failsafe_web run_failsafe_web_server
-failsafe_web:
-	@if ! command -v emcc; then echo -e "Install emscripten first: https://emscripten.org/docs/getting_started/downloads.html\nAnd source the env: source <path>/emsdk_env.sh"; exit 1; fi
-	@$(MAKE) --no-print-directory px4_sitl_default failsafe_test parameters_xml \
-		PX4_CMAKE_BUILD_TYPE=Release BUILD_DIR_SUFFIX=_failsafe_web \
-		CMAKE_ARGS="-DCMAKE_CXX_COMPILER=em++ -DCMAKE_C_COMPILER=emcc"
-run_failsafe_web_server: failsafe_web
-	@cd build/px4_sitl_default_failsafe_web && \
-		python3 -m http.server
+ifneq ($(ROS2_WS_DIR),)
+  ROS2_WS_DIR := $(basename ${ROS2_WS_DIR})
+else
+  ROS2_WS_DIR := ~/colcon_ws
+endif
+
+update_ros2_bridge:
+	@Tools/update_px4_ros2_bridge.sh --ws_dir ${ROS2_WS_DIR} --all
+
+update_px4_ros_com:
+	@Tools/update_px4_ros2_bridge.sh --ws_dir ${ROS2_WS_DIR} --px4_ros_com
+
+update_px4_msgs:
+	@Tools/update_px4_ros2_bridge.sh --ws_dir ${ROS2_WS_DIR} --px4_msgs
@@ -1,17 +1,17 @@
 Please use [PX4 Discuss](http://discuss.px4.io/) or [Slack](http://slack.px4.io/) to align on pull requests if necessary. You can then open draft pull requests to get early feedback.

-## Describe problem solved by this pull request
-A clear and concise description of the problem this proposed change will solve. Or, what it will improve.
+**Describe problem solved by this pull request**
+A clear and concise description of the problem this proposed change will solve.
 E.g. For this use case I ran into...

-## Describe your solution
+**Describe your solution**
 A clear and concise description of what you have implemented.

-## Describe possible alternatives
+**Describe possible alternatives**
 A clear and concise description of alternative solutions or features you've considered.

-## Test data / coverage
+**Test data / coverage**
 How was it tested? What cases were covered? Logs uploaded to https://review.px4.io/ and screenshots of the important plot parts.

-## Additional context
+**Additional context**
 Add any other related context or media.
@@ -4,40 +4,40 @@

 [![Nuttx Targets](https://github.com/PX4/PX4-Autopilot/workflows/Nuttx%20Targets/badge.svg)](https://github.com/PX4/PX4-Autopilot/actions?query=workflow%3A%22Nuttx+Targets%22?branch=master) [![SITL Tests](https://github.com/PX4/PX4-Autopilot/workflows/SITL%20Tests/badge.svg?branch=master)](https://github.com/PX4/PX4-Autopilot/actions?query=workflow%3A%22SITL+Tests%22)

-[![Discord Shield](https://discordapp.com/api/guilds/1022170275984457759/widget.png?style=shield)](https://discord.gg/dronecode)
+[![Slack](/.github/slack.svg)](https://join.slack.com/t/px4/shared_invite/zt-si4xo5qs-R4baYFmMjlrT4rQK5yUnaA)

-This repository holds the [PX4](http://px4.io) flight control solution for drones, with the main applications located in the [src/modules](https://github.com/PX4/PX4-Autopilot/tree/main/src/modules) directory. It also contains the PX4 Drone Middleware Platform, which provides drivers and middleware to run drones.
+This repository holds the [PX4](http://px4.io) flight control solution for drones, with the main applications located in the [src/modules](https://github.com/PX4/PX4-Autopilot/tree/master/src/modules) directory. It also contains the PX4 Drone Middleware Platform, which provides drivers and middleware to run drones.

 PX4 is highly portable, OS-independent and supports Linux, NuttX and MacOS out of the box.

-* Official Website: http://px4.io (License: BSD 3-clause, [LICENSE](https://github.com/PX4/PX4-Autopilot/blob/main/LICENSE))
-* [Supported airframes](https://docs.px4.io/main/en/airframes/airframe_reference.html) ([portfolio](https://px4.io/ecosystem/commercial-systems/)):
-  * [Multicopters](https://docs.px4.io/main/en/frames_multicopter/)
-  * [Fixed wing](https://docs.px4.io/main/en/frames_plane/)
-  * [VTOL](https://docs.px4.io/main/en/frames_vtol/)
-  * [Autogyro](https://docs.px4.io/main/en/frames_autogyro/)
-  * [Rover](https://docs.px4.io/main/en/frames_rover/)
+* Official Website: http://px4.io (License: BSD 3-clause, [LICENSE](https://github.com/PX4/PX4-Autopilot/blob/master/LICENSE))
+* [Supported airframes](https://docs.px4.io/master/en/airframes/airframe_reference.html) ([portfolio](http://px4.io/#airframes)):
+  * [Multicopters](https://docs.px4.io/master/en/frames_multicopter/)
+  * [Fixed wing](https://docs.px4.io/master/en/frames_plane/)
+  * [VTOL](https://docs.px4.io/master/en/frames_vtol/)
+  * [Autogyro](https://docs.px4.io/master/en/frames_autogyro/)
+  * [Rover](https://docs.px4.io/master/en/frames_rover/)
  * many more experimental types (Blimps, Boats, Submarines, High altitude balloons, etc)
 * Releases: [Downloads](https://github.com/PX4/PX4-Autopilot/releases)


 ## Building a PX4 based drone, rover, boat or robot

-The [PX4 User Guide](https://docs.px4.io/main/en/) explains how to assemble [supported vehicles](https://docs.px4.io/main/en/airframes/airframe_reference.html) and fly drones with PX4.
-See the [forum and chat](https://docs.px4.io/main/en/#getting-help) if you need help!
+The [PX4 User Guide](https://docs.px4.io/master/en/) explains how to assemble [supported vehicles](https://docs.px4.io/master/en/airframes/airframe_reference.html) and fly drones with PX4.
+See the [forum and chat](https://docs.px4.io/master/en/#support) if you need help!


 ## Changing code and contributing

-This [Developer Guide](https://docs.px4.io/main/en/development/development.html) is for software developers who want to modify the flight stack and middleware (e.g. to add new flight modes), hardware integrators who want to support new flight controller boards and peripherals, and anyone who wants to get PX4 working on a new (unsupported) airframe/vehicle.
+This [Developer Guide](https://docs.px4.io/master/en/development/development.html) is for software developers who want to modify the flight stack and middleware (e.g. to add new flight modes), hardware integrators who want to support new flight controller boards and peripherals, and anyone who wants to get PX4 working on a new (unsupported) airframe/vehicle.

-Developers should read the [Guide for Contributions](https://docs.px4.io/main/en/contribute/).
-See the [forum and chat](https://docs.px4.io/main/en/#getting-help) if you need help!
+Developers should read the [Guide for Contributions](https://docs.px4.io/master/en/contribute/).
+See the [forum and chat](https://dev.px4.io/master/en/#support) if you need help!


 ### Weekly Dev Call

-The PX4 Dev Team syncs up on a [weekly dev call](https://docs.px4.io/main/en/contribute/).
+The PX4 Dev Team syncs up on a [weekly dev call](https://dev.px4.io/master/en/contribute/#dev_call).

 > **Note** The dev call is open to all interested developers (not just the core dev team). This is a great opportunity to meet the team and contribute to the ongoing development of the platform. It includes a QA session for newcomers. All regular calls are listed in the [Dronecode calendar](https://www.dronecode.org/calendar/).

@@ -75,7 +75,7 @@ The PX4 Dev Team syncs up on a [weekly dev call](https://docs.px4.io/main/en/con
    * [Paul Riseborough](https://github.com/priseborough)
  * Vision based navigation and Obstacle Avoidance
    * [Markus Achtelik](https://github.com/markusachtelik)
-  * DDS/ROS2 Interface
+  * RTPS/ROS2 Interface
    * [Nuno Marques](https://github.com/TSC21)

 See also [maintainers list](https://px4.io/community/maintainers/) (px4.io) and the [contributors list](https://github.com/PX4/PX4-Autopilot/graphs/contributors) (Github).
@@ -88,43 +88,35 @@ This repository contains code supporting Pixhawk standard boards (best supported
  * FMUv6X and FMUv6U (STM32H7, 2021)
    * Various vendors will provide FMUv6X and FMUv6U based designs Q3/2021
  * FMUv5 and FMUv5X (STM32F7, 2019/20)
-    * [Pixhawk 4 (FMUv5)](https://docs.px4.io/main/en/flight_controller/pixhawk4.html)
-    * [Pixhawk 4 mini (FMUv5)](https://docs.px4.io/main/en/flight_controller/pixhawk4_mini.html)
-    * [CUAV V5+ (FMUv5)](https://docs.px4.io/main/en/flight_controller/cuav_v5_plus.html)
-    * [CUAV V5 nano (FMUv5)](https://docs.px4.io/main/en/flight_controller/cuav_v5_nano.html)
-    * [Auterion Skynode (FMUv5X)](https://docs.auterion.com/skynode)
+    * [Pixhawk 4 (FMUv5)](https://docs.px4.io/master/en/flight_controller/pixhawk4.html)
+    * [Pixhawk 4 mini (FMUv5)](https://docs.px4.io/master/en/flight_controller/pixhawk4_mini.html)
+    * [CUAV V5+ (FMUv5)](https://docs.px4.io/master/en/flight_controller/cuav_v5_plus.html)
+    * [CUAV V5 nano (FMUv5)](https://docs.px4.io/master/en/flight_controller/cuav_v5_nano.html)
+    * [Auterion Skynode (FMUv5X)](https://docs.px4.io/master/en/flight_controller/auterion_skynode.html)
  * FMUv4 (STM32F4, 2015)
-    * [Pixracer](https://docs.px4.io/main/en/flight_controller/pixracer.html)
-    * [Pixhawk 3 Pro](https://docs.px4.io/main/en/flight_controller/pixhawk3_pro.html)
+    * [Pixracer](https://docs.px4.io/master/en/flight_controller/pixracer.html)
+    * [Pixhawk 3 Pro](https://docs.px4.io/master/en/flight_controller/pixhawk3_pro.html)
  * FMUv3 (STM32F4, 2014)
-    * [Pixhawk 2](https://docs.px4.io/main/en/flight_controller/pixhawk-2.html)
-    * [Pixhawk Mini](https://docs.px4.io/main/en/flight_controller/pixhawk_mini.html)
-    * [CUAV Pixhack v3](https://docs.px4.io/main/en/flight_controller/pixhack_v3.html)
+    * [Pixhawk 2](https://docs.px4.io/master/en/flight_controller/pixhawk-2.html)
+    * [Pixhawk Mini](https://docs.px4.io/master/en/flight_controller/pixhawk_mini.html)
+    * [CUAV Pixhack v3](https://docs.px4.io/master/en/flight_controller/pixhack_v3.html)
  * FMUv2 (STM32F4, 2013)
-    * [Pixhawk](https://docs.px4.io/main/en/flight_controller/pixhawk.html)
-    * [Pixfalcon](https://docs.px4.io/main/en/flight_controller/pixfalcon.html)
+    * [Pixhawk](https://docs.px4.io/master/en/flight_controller/pixhawk.html)
+    * [Pixfalcon](https://docs.px4.io/master/en/flight_controller/pixfalcon.html)

 ### Manufacturer and Community supported
-  * [Holybro Durandal](https://docs.px4.io/main/en/flight_controller/durandal.html)
-  * [Hex Cube Orange](https://docs.px4.io/main/en/flight_controller/cubepilot_cube_orange.html)
-  * [Hex Cube Yellow](https://docs.px4.io/main/en/flight_controller/cubepilot_cube_yellow.html)
+  * [Holybro Durandal](https://docs.px4.io/master/en/flight_controller/durandal.html)
+  * [Hex Cube Orange](https://docs.px4.io/master/en/flight_controller/cubepilot_cube_orange.html)
+  * [Hex Cube Yellow](https://docs.px4.io/master/en/flight_controller/cubepilot_cube_yellow.html)
  * [Airmind MindPX V2.8](http://www.mindpx.net/assets/accessories/UserGuide_MindPX.pdf)
  * [Airmind MindRacer V1.2](http://mindpx.net/assets/accessories/mindracer_user_guide_v1.2.pdf)
-  * [Bitcraze Crazyflie 2.0](https://docs.px4.io/main/en/complete_vehicles/crazyflie2.html)
-  * [Omnibus F4 SD](https://docs.px4.io/main/en/flight_controller/omnibus_f4_sd.html)
-  * [Holybro Kakute F7](https://docs.px4.io/main/en/flight_controller/kakutef7.html)
-  * [Raspberry PI with Navio 2](https://docs.px4.io/main/en/flight_controller/raspberry_pi_navio2.html)
+  * [Bitcraze Crazyflie 2.0](https://docs.px4.io/master/en/complete_vehicles/crazyflie2.html)
+  * [Omnibus F4 SD](https://docs.px4.io/master/en/flight_controller/omnibus_f4_sd.html)
+  * [Holybro Kakute F7](https://docs.px4.io/master/en/flight_controller/kakutef7.html)
+  * [Raspberry PI with Navio 2](https://docs.px4.io/master/en/flight_controller/raspberry_pi_navio2.html)

-Additional information about supported hardware can be found in [PX4 user Guide > Autopilot Hardware](https://docs.px4.io/main/en/flight_controller/).
+Additional information about supported hardware can be found in [PX4 user Guide > Autopilot Hardware](https://docs.px4.io/master/en/flight_controller/).

 ## Project Roadmap

 A high level project roadmap is available [here](https://github.com/orgs/PX4/projects/25).
-
-## Project Governance
-
-The PX4 Autopilot project including all of its trademarks is hosted under [Dronecode](https://www.dronecode.org/), part of the Linux Foundation.
-
-<a href="https://www.dronecode.org/" style="padding:20px" ><img src="https://mavlink.io/assets/site/logo_dronecode.png" alt="Dronecode Logo" width="110px"/></a>
-<a href="https://www.linuxfoundation.org/projects" style="padding:20px;"><img src="https://mavlink.io/assets/site/logo_linux_foundation.png" alt="Linux Foundation Logo" width="80px" /></a>
-<div style="padding:10px">&nbsp;</div>
@@ -112,17 +112,23 @@ add_custom_command(
 		${PX4_SOURCE_DIR}/Tools/px4airframes/xmlout.py
 		${PX4_SOURCE_DIR}/Tools/serial/generate_config.py
 	)
+set(romfs_extract_stamp ${CMAKE_CURRENT_BINARY_DIR}/romfs_extract.stamp)
+add_custom_command(
+	OUTPUT ${romfs_extract_stamp}
+	COMMAND ${CMAKE_COMMAND} -E remove_directory ${romfs_gen_root_dir}/*
+	COMMAND ${CMAKE_COMMAND} -E tar xf ${romfs_tar_file}
+	COMMAND ${CMAKE_COMMAND} -E touch ${romfs_extract_stamp}
+	WORKING_DIRECTORY ${romfs_gen_root_dir}
+	DEPENDS ${romfs_tar_file}
+	VERBATIM
+	)

-
-set(romfs_copy_stamp ${CMAKE_CURRENT_BINARY_DIR}/romfs_copy.stamp)
 add_custom_command(
 	OUTPUT
 		${romfs_gen_root_dir}/init.d/rc.serial
 		${romfs_gen_root_dir}/init.d/rc.autostart
 		${romfs_gen_root_dir}/init.d/rc.autostart.post
-		${romfs_copy_stamp}
-	COMMAND ${CMAKE_COMMAND} -E remove_directory ${romfs_gen_root_dir}/*
-	COMMAND ${CMAKE_COMMAND} -E tar xf ${romfs_tar_file}
+		romfs_copy.stamp
 	COMMAND ${PYTHON_EXECUTABLE} ${PX4_SOURCE_DIR}/Tools/px_process_airframes.py
 		--airframes-path ${romfs_gen_root_dir}/init.d
 		--start-script ${romfs_gen_root_dir}/init.d/rc.autostart
@@ -131,9 +137,9 @@ add_custom_command(
 		--rc-dir ${romfs_gen_root_dir}/init.d
 		--serial-ports ${board_serial_ports} ${added_arguments}
 		--config-files ${module_config_files} #--verbose
-	COMMAND ${CMAKE_COMMAND} -E touch ${romfs_copy_stamp}
-	WORKING_DIRECTORY ${romfs_gen_root_dir}
-	DEPENDS ${romfs_tar_file}
+	COMMAND ${CMAKE_COMMAND} -E touch romfs_copy.stamp
+	DEPENDS
+		${romfs_extract_stamp}
 	COMMENT "ROMFS: copying, generating airframes"
 	)

@@ -305,7 +311,7 @@ add_custom_command(OUTPUT romfs_extras.stamp

 add_custom_target(romfs_gen_files_target
 	DEPENDS
-		${romfs_copy_stamp}
+		${romfs_extract_stamp}
 		${romfs_gen_root_dir}/init.d/rc.serial
 		romfs_extras.stamp
 	)
@@ -86,28 +86,10 @@ unset BOARD_RC_SENSORS
 . ${R}etc/init.d/rc.serial

 # Check for flow sensor
-if param compare -s SENS_EN_PX4FLOW 1
+if param compare SENS_EN_PX4FLOW 1
 then
-	px4flow start -X &
+	px4flow start -X
 fi

-if param compare -s IMU_GYRO_CAL_EN 1
-then
-	gyro_calibration start
-fi
-
-
-if param compare -s MBE_ENABLE 1
-then
-	# conservative mag bias estimation
-	param set-default MBE_LEARN_GAIN 5
-	param set-default IMU_GYRO_CUTOFF 20
-	mag_bias_estimator start
-fi
-
-param set-default SENS_MAG_RATE 100
-
-sensors start
-
 uavcannode start
 unset R
@@ -32,7 +32,9 @@
 ############################################################################

 add_subdirectory(init.d)
+add_subdirectory(mixers)
 # TODO: make this configurable from the board config, or better combine
 if("${PX4_BOARD}" MATCHES "sitl")
+	add_subdirectory(mixers-sitl)
 	add_subdirectory(init.d-posix)
 endif()
@@ -36,6 +36,7 @@ add_subdirectory(airframes)
 px4_add_romfs_files(
 	px4-rc.mavlink
 	px4-rc.params
+	px4-rc.rtps
 	px4-rc.simulator
 	rc.replay
 	rcS
@@ -9,24 +9,4 @@

 . ${R}etc/init.d/rc.mc_defaults

-
-param set-default CA_AIRFRAME 0
-
-param set-default CA_ROTOR_COUNT 4
-param set-default CA_ROTOR0_PX 0.1515
-param set-default CA_ROTOR0_PY 0.245
-param set-default CA_ROTOR0_KM 0.05
-param set-default CA_ROTOR1_PX -0.1515
-param set-default CA_ROTOR1_PY -0.1875
-param set-default CA_ROTOR1_KM 0.05
-param set-default CA_ROTOR2_PX 0.1515
-param set-default CA_ROTOR2_PY -0.245
-param set-default CA_ROTOR2_KM -0.05
-param set-default CA_ROTOR3_PX -0.1515
-param set-default CA_ROTOR3_PY 0.1875
-param set-default CA_ROTOR3_KM -0.05
-
-param set-default PWM_MAIN_FUNC1 101
-param set-default PWM_MAIN_FUNC2 102
-param set-default PWM_MAIN_FUNC3 103
-param set-default PWM_MAIN_FUNC4 104
+set MIXER quad_w
@@ -0,0 +1,37 @@
+#!/bin/sh
+#
+# @name 3DR Iris Quadrotor SITL
+#
+# @type Quadrotor Wide
+#
+# @maintainer Julian Oes <julian@oes.ch>
+#
+
+. ${R}etc/init.d/rc.mc_defaults
+
+param set-default SYS_CTRL_ALLOC 1
+
+
+param set-default CA_AIRFRAME 0
+
+param set-default CA_MC_R_COUNT 4
+param set-default CA_MC_R0_PX 0.1515
+param set-default CA_MC_R0_PY 0.245
+param set-default CA_MC_R0_KM 0.05
+param set-default CA_MC_R1_PX -0.1515
+param set-default CA_MC_R1_PY -0.1875
+param set-default CA_MC_R1_KM 0.05
+param set-default CA_MC_R2_PX 0.1515
+param set-default CA_MC_R2_PY -0.245
+param set-default CA_MC_R2_KM -0.05
+param set-default CA_MC_R3_PX -0.1515
+param set-default CA_MC_R3_PY 0.1875
+param set-default CA_MC_R3_KM -0.05
+
+param set-default PWM_MAIN_FUNC1 101
+param set-default PWM_MAIN_FUNC2 102
+param set-default PWM_MAIN_FUNC3 103
+param set-default PWM_MAIN_FUNC4 104
+
+set MIXER skip
+set MIXER_AUX none
@@ -1,97 +0,0 @@
-#!/bin/sh
-#
-# @name 6DoF Omnicopter SITL
-#
-# @type Quadrotor Wide
-#
-# @maintainer Jaeyoung Lim <jalim@ethz.ch>
-#
-
-. ${R}etc/init.d/rc.mc_defaults
-
-
-param set-default CA_AIRFRAME 0
-
-param set-default CA_ROTOR_COUNT 8
-param set-default CA_R_REV 255
-
-param set-default CA_ROTOR0_PX 0.14435
-param set-default CA_ROTOR0_PY -0.14435
-param set-default CA_ROTOR0_PZ -0.14435
-param set-default CA_ROTOR0_KM 0.05 # CCW
-param set-default CA_ROTOR0_AX -0.788675
-param set-default CA_ROTOR0_AY -0.211325
-param set-default CA_ROTOR0_AZ -0.57735
-
-param set-default CA_ROTOR1_PX -0.14435
-param set-default CA_ROTOR1_PY -0.14435
-param set-default CA_ROTOR1_PZ -0.14435
-param set-default CA_ROTOR1_KM 0.05
-param set-default CA_ROTOR1_AX 0.211325
-param set-default CA_ROTOR1_AY -0.788675
-param set-default CA_ROTOR1_AZ 0.57735
-
-param set-default CA_ROTOR2_PX 0.14435
-param set-default CA_ROTOR2_PY 0.14435
-param set-default CA_ROTOR2_PZ -0.14435
-param set-default CA_ROTOR2_KM 0.05
-param set-default CA_ROTOR2_AX -0.211325
-param set-default CA_ROTOR2_AY 0.788675
-param set-default CA_ROTOR2_AZ 0.57735
-
-param set-default CA_ROTOR3_PX -0.14435
-param set-default CA_ROTOR3_PY 0.14435
-param set-default CA_ROTOR3_PZ -0.14435
-param set-default CA_ROTOR3_KM 0.05
-param set-default CA_ROTOR3_AX 0.788675
-param set-default CA_ROTOR3_AY 0.211325
-param set-default CA_ROTOR3_AZ -0.57735
-
-param set-default CA_ROTOR4_PX 0.14435
-param set-default CA_ROTOR4_PY -0.14435
-param set-default CA_ROTOR4_PZ 0.14435
-param set-default CA_ROTOR4_KM 0.05
-param set-default CA_ROTOR4_AX 0.788675
-param set-default CA_ROTOR4_AY 0.211325
-param set-default CA_ROTOR4_AZ -0.57735
-
-param set-default CA_ROTOR5_PX -0.14435
-param set-default CA_ROTOR5_PY -0.14435
-param set-default CA_ROTOR5_PZ 0.14435
-param set-default CA_ROTOR5_KM 0.05
-param set-default CA_ROTOR5_AX -0.211325
-param set-default CA_ROTOR5_AY 0.788675
-param set-default CA_ROTOR5_AZ 0.57735
-
-param set-default CA_ROTOR6_PX 0.14435
-param set-default CA_ROTOR6_PY 0.14435
-param set-default CA_ROTOR6_PZ 0.14435
-param set-default CA_ROTOR6_KM 0.05
-param set-default CA_ROTOR6_AX 0.211325
-param set-default CA_ROTOR6_AY -0.788675
-param set-default CA_ROTOR6_AZ 0.57735
-
-param set-default CA_ROTOR7_PX -0.14435
-param set-default CA_ROTOR7_PY 0.14435
-param set-default CA_ROTOR7_PZ 0.14435
-param set-default CA_ROTOR7_KM 0.05
-param set-default CA_ROTOR7_AX -0.788675
-param set-default CA_ROTOR7_AY -0.211325
-param set-default CA_ROTOR7_AZ -0.57735
-
-param set-default PWM_MAIN_FUNC1 101
-param set-default PWM_MAIN_FUNC2 102
-param set-default PWM_MAIN_FUNC3 103
-param set-default PWM_MAIN_FUNC4 104
-param set-default PWM_MAIN_FUNC5 105
-param set-default PWM_MAIN_FUNC6 106
-param set-default PWM_MAIN_FUNC7 107
-param set-default PWM_MAIN_FUNC8 108
-
-# disable MC desaturation which improves attitude tracking
-param set-default CA_METHOD 0
-
-# disable attitude failure detection
-param set-default FD_FAIL_P 0
-param set-default FD_FAIL_R 0
-
@@ -0,0 +1,19 @@
+#!/bin/sh
+#
+# @name IF750A SITL
+# InspiredFlight 750 Auterion edition. Gazebo Only.
+#
+# @type Quadrotor
+#
+
+. ${R}etc/init.d/rc.mc_defaults
+
+# EKF2: Multi GPS blending (as the model has 2 GPS's)
+param set-default SENS_GPS_MASK 7
+param set-default TRIG_INTERFACE 3
+param set-default TRIG_MODE 4
+param set-default MNT_MODE_IN 4
+param set-default MNT_MODE_OUT 2
+param set-default MNT_DO_STAB 2
+
+set MIXER quad_x
@@ -8,8 +8,4 @@

 . ${R}etc/init.d/airframes/4016_holybro_px4vision

-param set-default PWM_MAIN_FUNC1 101
-param set-default PWM_MAIN_FUNC2 102
-param set-default PWM_MAIN_FUNC3 103
-param set-default PWM_MAIN_FUNC4 104
-
+set MIXER quad_x
@@ -1,44 +0,0 @@
-#!/bin/sh
-#
-# @name QuadrotorX SITL for SIH
-#
-# @type Quadrotor
-#
-# @maintainer Romain Chiappinelli <romain.chiap@gmail.com>
-#
-
-. ${R}etc/init.d/rc.mc_defaults
-
-PX4_SIMULATOR=${PX4_SIMULATOR:=sihsim}
-PX4_SIM_MODEL=${PX4_SIM_MODEL:=quadx}
-
-# disable some checks to allow to fly:
-# - with usb
-param set-default CBRK_USB_CHK 197848
-# - without real battery
-param set-default CBRK_SUPPLY_CHK 894281
-# - without safety switch
-param set-default COM_PREARM_MODE 0
-param set-default CBRK_IO_SAFETY 22027
-
-param set-default CA_ROTOR_COUNT 4
-param set-default CA_ROTOR0_PX 0.15
-param set-default CA_ROTOR0_PY 0.15
-param set-default CA_ROTOR0_KM 0.05
-param set-default CA_ROTOR1_PX -0.15
-param set-default CA_ROTOR1_PY -0.15
-param set-default CA_ROTOR1_KM 0.05
-param set-default CA_ROTOR2_PX 0.15
-param set-default CA_ROTOR2_PY -0.15
-param set-default CA_ROTOR2_KM -0.05
-param set-default CA_ROTOR3_PX -0.15
-param set-default CA_ROTOR3_PY 0.15
-param set-default CA_ROTOR3_KM -0.05
-
-param set-default PWM_MAIN_FUNC1 101
-param set-default PWM_MAIN_FUNC2 102
-param set-default PWM_MAIN_FUNC3 103
-param set-default PWM_MAIN_FUNC4 104
-
-param set SIH_VEHICLE_TYPE 0
-
@@ -1,51 +0,0 @@
-#!/bin/sh
-#
-# @name Plane SITL for SIH
-#
-# @type Plane
-#
-# @maintainer Romain Chiappinelli <romain.chiap@gmail.com>
-
-. ${R}etc/init.d/rc.fw_defaults
-
-PX4_SIMULATOR=${PX4_SIMULATOR:=sihsim}
-PX4_SIM_MODEL=${PX4_SIM_MODEL:=airplane}
-
-# disable some checks to allow to fly:
-# - with usb
-param set-default CBRK_USB_CHK 197848
-# - without real battery
-param set-default CBRK_SUPPLY_CHK 894281
-# - without safety switch
-param set-default COM_PREARM_MODE 0
-param set-default CBRK_IO_SAFETY 22027
-
-param set-default BAT_N_CELLS 3
-
-param set-default SIH_T_MAX 6.0
-param set-default SIH_MASS 0.3
-param set-default SIH_IXX 0.00402
-param set-default SIH_IYY 0.0144
-param set-default SIH_IZZ 0.0177
-param set-default SIH_IXZ 0.00046
-param set-default SIH_KDV 0.2
-
-param set-default SIH_VEHICLE_TYPE 1 	# sih as fixed wing
-param set-default RWTO_TKOFF 1  # enable takeoff from runway (as opposed to launched)
-
-
-param set-default CA_AIRFRAME 1
-
-param set-default CA_ROTOR_COUNT 1
-
-param set-default CA_SV_CS_COUNT 3
-param set-default CA_SV_CS0_TRQ_R -0.5
-param set-default CA_SV_CS0_TYPE 1
-param set-default CA_SV_CS1_TRQ_P 1.0
-param set-default CA_SV_CS1_TYPE 3
-param set-default CA_SV_CS2_TRQ_Y 1.0
-param set-default CA_SV_CS2_TYPE 4
-param set-default PWM_MAIN_FUNC3 201
-param set-default PWM_MAIN_FUNC4 202
-param set-default PWM_MAIN_FUNC5 203
-param set-default PWM_MAIN_FUNC6 101
@@ -1,69 +0,0 @@
-#!/bin/sh
-#
-# @name SIH Tailsitter Duo
-#
-# @type VTOL
-#
-# @maintainer Romain Chiappinelli <romain.chiap@gmail.com>
-
-. ${R}etc/init.d/rc.vtol_defaults
-
-PX4_SIMULATOR=${PX4_SIMULATOR:=sihsim}
-PX4_SIM_MODEL=${PX4_SIM_MODEL:=xvert}
-
-param set-default VT_ELEV_MC_LOCK 0
-param set-default VT_TYPE 0
-param set-default VT_FW_DIFTHR_EN 1
-param set-default VT_FW_DIFTHR_SC 0.3
-param set-default MPC_MAN_Y_MAX 60
-param set-default MC_PITCH_P 5
-
-param set-default MAV_TYPE 19
-
-# disable some checks to allow to fly:
-# - with usb
-param set-default CBRK_USB_CHK 197848
-# - without real battery
-param set-default CBRK_SUPPLY_CHK 894281
-# - without safety switch
-param set-default COM_PREARM_MODE 0
-param set-default CBRK_IO_SAFETY 22027
-
-param set-default BAT_N_CELLS 3
-
-param set-default SIH_T_MAX 2.0
-param set-default SIH_Q_MAX 0.0165
-param set-default SIH_MASS 0.2
-# IXX and IZZ are inverted from the thesis as the body frame is pitched by 90 deg
-param set-default SIH_IXX 0.00354
-param set-default SIH_IYY 0.000625
-param set-default SIH_IZZ 0.00300
-param set-default SIH_IXZ 0.0
-param set-default SIH_KDV 0.2
-param set-default SIH_L_ROLL 0.145
-
-# sih as tailsitter
-param set-default SIH_VEHICLE_TYPE 2
-
-param set-default CA_AIRFRAME 4
-
-param set-default CA_ROTOR_COUNT 2
-param set-default CA_ROTOR0_PX 0
-param set-default CA_ROTOR0_PY 2
-param set-default CA_ROTOR0_KM 0.05
-param set-default CA_ROTOR1_PX 0
-param set-default CA_ROTOR1_PY -1
-param set-default CA_ROTOR1_KM 0.05
-
-param set-default CA_SV_CS_COUNT 2
-param set-default CA_SV_CS0_TYPE 5
-param set-default CA_SV_CS0_TRQ_P 0.5
-param set-default CA_SV_CS0_TRQ_Y -0.5
-param set-default CA_SV_CS1_TYPE 6
-param set-default CA_SV_CS1_TRQ_P 0.5
-param set-default CA_SV_CS1_TRQ_Y 0.5
-
-param set-default PWM_MAIN_FUNC1 101
-param set-default PWM_MAIN_FUNC2 102
-param set-default PWM_MAIN_FUNC5 201
-param set-default PWM_MAIN_FUNC6 202
@@ -9,7 +9,6 @@

 # EKF2
 param set-default EKF2_AID_MASK 2
-param set-default EKF2_GPS_CTRL 0
 param set-default EKF2_EVP_NOISE 0.05
 param set-default EKF2_EVA_NOISE 0.05

@@ -19,7 +18,3 @@ param set-default LPE_FAKE_ORIGIN 1

 param set-default MPC_ALT_MODE 2

-param set-default SENS_FLOW_ROT 6
-param set-default SENS_FLOW_MINHGT 0.7
-param set-default SENS_FLOW_MAXHGT 3.0
-param set-default SENS_FLOW_MAXR 2.5
@@ -10,7 +10,6 @@
 # enable fusion of landing target velocity
 param set-default LTEST_MODE 1
 param set-default PLD_HACC_RAD 0.1
-param set-default RTL_PLD_MD 2

 # Start up Landing Target Estimator module
 landing_target_estimator start
@@ -10,7 +10,6 @@
 # EKF2: Vision position and heading
 param set-default EKF2_AID_MASK 24
 param set-default EKF2_EV_DELAY 5
-param set-default EKF2_GPS_CTRL 0

 # LPE: Vision + baro
 param set-default LPE_FUSION 132
@@ -0,0 +1,13 @@
+#!/bin/sh
+#
+# @name Solo
+#
+# @type Quadrotor
+#
+
+. ${R}etc/init.d/rc.mc_defaults
+
+param set-default MC_PITCHRATE_P 0.1
+param set-default MC_ROLLRATE_P 0.05
+
+set MIXER quad_x
@@ -9,7 +9,7 @@

 # EKF2
 param set-default EKF2_AID_MASK 2
-param set-default EKF2_GPS_CTRL 0
+param set-default SENS_FLOW_ROT 0

 # LPE: Flow-only mode
 param set-default LPE_FUSION 242
@@ -10,4 +10,3 @@
 # EKF2: Vision velocity and heading
 param set-default EKF2_AID_MASK 272
 param set-default EKF2_EV_DELAY 5
-param set-default EKF2_GPS_CTRL 0
@@ -0,0 +1,15 @@
+#!/bin/sh
+#
+# @name UUV
+#
+
+. ${R}etc/init.d/rc.uuv_defaults
+
+# disable circuit breaker for airspeed sensor
+param set-default CBRK_AIRSPD_CHK 162128
+
+set MAV_TYPE 12
+param set MAV_TYPE ${MAV_TYPE}
+
+set MIXER_FILE etc/mixers-sitl/uuv_x_sitl.main.mix
+set MIXER custom
@@ -8,40 +8,8 @@
 # disable circuit breaker for airspeed sensor
 param set-default CBRK_AIRSPD_CHK 162128

-param set-default CA_AIRFRAME 7
-param set-default CA_ROTOR_COUNT 4
-param set-default CA_R_REV 255
-param set-default CA_ROTOR0_AX 1.0000
-param set-default CA_ROTOR0_AY 0.0000
-param set-default CA_ROTOR0_AZ 0.0000
-param set-default CA_ROTOR0_KM 0.0000
-param set-default CA_ROTOR0_PX 0.0000
-param set-default CA_ROTOR0_PY -0.3000
-param set-default CA_ROTOR0_PZ -0.3000
-param set-default CA_ROTOR1_AX 1.0000
-param set-default CA_ROTOR1_AY 0.0000
-param set-default CA_ROTOR1_AZ 0.0000
-param set-default CA_ROTOR1_KM 0.0000
-param set-default CA_ROTOR1_PX 0.0000
-param set-default CA_ROTOR1_PY 0.3000
-param set-default CA_ROTOR1_PZ -0.3000
-param set-default CA_ROTOR2_AX 1.0000
-param set-default CA_ROTOR2_AY 0.0000
-param set-default CA_ROTOR2_AZ 0.0000
-param set-default CA_ROTOR2_KM 0.0000
-param set-default CA_ROTOR2_PX 0.0000
-param set-default CA_ROTOR2_PY 0.3000
-param set-default CA_ROTOR2_PZ 0.3000
-param set-default CA_ROTOR3_AX 1.0000
-param set-default CA_ROTOR3_AY 0.0000
-param set-default CA_ROTOR3_AZ 0.0000
-param set-default CA_ROTOR3_KM 0.0000
-param set-default CA_ROTOR3_PX 0.0000
-param set-default CA_ROTOR3_PY -0.3000
-param set-default CA_ROTOR3_PZ 0.3000
-
-param set-default PWM_MAIN_FUNC1 101
-param set-default PWM_MAIN_FUNC2 102
-param set-default PWM_MAIN_FUNC3 103
-param set-default PWM_MAIN_FUNC4 104
+set MAV_TYPE 12
+param set MAV_TYPE ${MAV_TYPE}

+set MIXER_FILE etc/mixers-sitl/uuv_x_sitl.main.mix
+set MIXER custom
@@ -8,60 +8,6 @@
 # disable circuit breaker for airspeed sensor
 param set-default CBRK_AIRSPD_CHK 162128

-param set-default CA_AIRFRAME 7
-
-param set-default CA_ROTOR_COUNT 8
-param set-default CA_R_REV 255
-param set-default CA_ROTOR0_AX 1.0000
-param set-default CA_ROTOR0_AY -1.0000
-param set-default CA_ROTOR0_AZ 0.0000
-param set-default CA_ROTOR0_KM 0.0000
-param set-default CA_ROTOR0_PX 0.5000
-param set-default CA_ROTOR0_PY 0.3000
-param set-default CA_ROTOR0_PZ 0.2000
-param set-default CA_ROTOR1_AX 1.0000
-param set-default CA_ROTOR1_AY 1.0000
-param set-default CA_ROTOR1_AZ 0.0000
-param set-default CA_ROTOR1_KM 0.0000
-param set-default CA_ROTOR1_PX 0.5000
-param set-default CA_ROTOR1_PY -0.3000
-param set-default CA_ROTOR1_PZ 0.2000
-param set-default CA_ROTOR2_AX 1.0000
-param set-default CA_ROTOR2_AY 1.0000
-param set-default CA_ROTOR2_AZ 0.0000
-param set-default CA_ROTOR2_KM 0.0000
-param set-default CA_ROTOR2_PX -0.5000
-param set-default CA_ROTOR2_PY 0.3000
-param set-default CA_ROTOR2_PZ 0.2000
-param set-default CA_ROTOR3_AX 1.0000
-param set-default CA_ROTOR3_AY -1.0000
-param set-default CA_ROTOR3_AZ 0.0000
-param set-default CA_ROTOR3_KM 0.0000
-param set-default CA_ROTOR3_PX -0.5000
-param set-default CA_ROTOR3_PY -0.3000
-param set-default CA_ROTOR3_PZ 0.2000
-param set-default CA_ROTOR4_AZ -1.0000
-param set-default CA_ROTOR4_KM 0.0000
-param set-default CA_ROTOR4_PX 0.5000
-param set-default CA_ROTOR4_PY 0.5000
-param set-default CA_ROTOR5_AZ 1.0000
-param set-default CA_ROTOR5_KM 0.0000
-param set-default CA_ROTOR5_PX 0.5000
-param set-default CA_ROTOR5_PY -0.5000
-param set-default CA_ROTOR6_AZ 1.0000
-param set-default CA_ROTOR6_KM 0.0000
-param set-default CA_ROTOR6_PX -0.5000
-param set-default CA_ROTOR6_PY 0.5000
-param set-default CA_ROTOR7_KM 0.0000
-param set-default CA_ROTOR7_PX -0.5000
-param set-default CA_ROTOR7_PY -0.5000
-
-param set-default PWM_MAIN_FUNC1 101
-param set-default PWM_MAIN_FUNC2 102
-param set-default PWM_MAIN_FUNC3 103
-param set-default PWM_MAIN_FUNC4 104
-param set-default PWM_MAIN_FUNC5 105
-param set-default PWM_MAIN_FUNC6 106
-param set-default PWM_MAIN_FUNC7 107
-param set-default PWM_MAIN_FUNC8 108
-
+set PWM_OUT 12345678
+set MIXER_FILE etc/mixers-sitl/vectored6dof_sitl.main.mix
+set MIXER custom
@@ -10,30 +10,24 @@ param set-default EKF2_MAG_YAWLIM 0

 param set-default FW_LND_AIRSPD_SC 1
 param set-default FW_LND_ANG 8
+param set-default FW_THR_LND_MAX 0

 param set-default FW_L1_PERIOD 12

-param set-default FW_PR_P 0.9
-param set-default FW_PR_FF 0.5
-param set-default FW_PR_I 0.5
-param set-default TRIM_PITCH -0.15
+param set-default FW_MAN_P_MAX 30

+param set-default FW_PR_P 0.9
+param set-default FW_PR_FF 0.2
 param set-default FW_PSP_OFF 2
+param set-default FW_P_LIM_MAX 32
 param set-default FW_P_LIM_MIN -15

-param set-default FW_RR_FF 0.5
+param set-default FW_RR_FF 0.1
 param set-default FW_RR_P 0.3
-param set-default FW_RR_I 0.5
-
-param set-default FW_YR_FF 0.5
-param set-default FW_YR_P 0.6
-param set-default FW_YR_I 0.5
-
-param set-default FW_SPOILERS_LND 0.4

 param set-default FW_THR_MAX 0.6
 param set-default FW_THR_MIN 0.05
-param set-default FW_THR_TRIM 0.25
+param set-default FW_THR_CRUISE 0.25

 param set-default FW_T_CLMB_MAX 8
 param set-default FW_T_SINK_MAX 2.7
@@ -49,29 +43,5 @@ param set-default NAV_DLL_ACT 2

 param set-default RWTO_TKOFF 1

-param set-default CA_AIRFRAME 1
-
-param set-default CA_ROTOR_COUNT 1
-param set-default CA_ROTOR0_PX 0.3
-
-param set-default CA_SV_CS_COUNT 6
-param set-default CA_SV_CS0_TRQ_R -0.5
-param set-default CA_SV_CS0_TYPE 1
-param set-default CA_SV_CS1_TRQ_R 0.5
-param set-default CA_SV_CS1_TYPE 2
-param set-default CA_SV_CS2_TRQ_P 1.0
-param set-default CA_SV_CS2_TYPE 3
-param set-default CA_SV_CS3_TRQ_Y 1.0
-param set-default CA_SV_CS3_TYPE 4
-param set-default CA_SV_CS4_TYPE 9
-param set-default CA_SV_CS5_TYPE 10
-param set-default PWM_MAIN_FUNC3 204
-param set-default PWM_MAIN_FUNC4 205
-param set-default PWM_MAIN_FUNC5 101
-param set-default PWM_MAIN_FUNC6 201
-param set-default PWM_MAIN_FUNC7 202
-param set-default PWM_MAIN_FUNC8 203
-param set-default PWM_MAIN_FUNC9 206
-param set-default PWM_MAIN_REV 256
-
-
+set MIXER_FILE etc/mixers-sitl/plane_sitl.main.mix
+set MIXER custom
@@ -7,9 +7,12 @@

 param set-default FW_LND_AIRSPD_SC 1.1
 param set-default FW_LND_ANG 5
+param set-default FW_THR_LND_MAX 0
+param set-default FW_LND_HHDIST 30
 param set-default FW_LND_FL_PMIN 9.5
 param set-default FW_LND_FL_PMAX 20
 param set-default FW_LND_FLALT 5
+param set-default FW_LND_TLALT 15

 param set-default FW_L1_PERIOD 25

@@ -35,32 +38,11 @@ param set-default NAV_DLL_ACT 2
 param set-default RWTO_TKOFF 1

 param set-default RWTO_MAX_PITCH 20
+param set-default RWTO_MAX_ROLL 10

 param set-default RWTO_PSP 8
 param set-default RWTO_AIRSPD_SCL 1.8

-param set-default CA_AIRFRAME 1
-
-param set-default CA_ROTOR_COUNT 1
-param set-default CA_ROTOR0_PX 0.3
-
-param set-default CA_SV_CS_COUNT 6
-param set-default CA_SV_CS0_TRQ_R -0.5
-param set-default CA_SV_CS0_TYPE 1
-param set-default CA_SV_CS1_TRQ_R 0.5
-param set-default CA_SV_CS1_TYPE 2
-param set-default CA_SV_CS2_TRQ_P 1.0
-param set-default CA_SV_CS2_TYPE 3
-param set-default CA_SV_CS3_TRQ_Y 1.0
-param set-default CA_SV_CS3_TYPE 4
-param set-default CA_SV_CS4_TYPE 9
-param set-default CA_SV_CS5_TYPE 10
-param set-default PWM_MAIN_FUNC3 204
-param set-default PWM_MAIN_FUNC4 205
-param set-default PWM_MAIN_FUNC5 101
-param set-default PWM_MAIN_FUNC6 201
-param set-default PWM_MAIN_FUNC7 202
-param set-default PWM_MAIN_FUNC8 203
-param set-default PWM_MAIN_FUNC9 206
-param set-default PWM_MAIN_REV 256

+set MIXER_FILE etc/mixers-sitl/plane_sitl.main.mix
+set MIXER custom
@@ -7,9 +7,12 @@

 param set-default FW_LND_AIRSPD_SC 1.1
 param set-default FW_LND_ANG 5
+param set-default FW_THR_LND_MAX 0
+param set-default FW_LND_HHDIST 30
 param set-default FW_LND_FL_PMIN 9.5
 param set-default FW_LND_FL_PMAX 20
 param set-default FW_LND_FLALT 5
+param set-default FW_LND_TLALT 15

 param set-default FW_L1_PERIOD 25

@@ -35,32 +38,10 @@ param set-default NAV_DLL_ACT 2
 param set-default RWTO_TKOFF 1

 param set-default RWTO_MAX_PITCH 20
+param set-default RWTO_MAX_ROLL 10

 param set-default RWTO_PSP 8
 param set-default RWTO_AIRSPD_SCL 1.8

-param set-default CA_AIRFRAME 1
-
-param set-default CA_ROTOR_COUNT 1
-param set-default CA_ROTOR0_PX 0.3
-
-param set-default CA_SV_CS_COUNT 6
-param set-default CA_SV_CS0_TRQ_R -0.5
-param set-default CA_SV_CS0_TYPE 1
-param set-default CA_SV_CS1_TRQ_R 0.5
-param set-default CA_SV_CS1_TYPE 2
-param set-default CA_SV_CS2_TRQ_P 1.0
-param set-default CA_SV_CS2_TYPE 3
-param set-default CA_SV_CS3_TRQ_Y 1.0
-param set-default CA_SV_CS3_TYPE 4
-param set-default CA_SV_CS4_TYPE 9
-param set-default CA_SV_CS5_TYPE 10
-param set-default PWM_MAIN_FUNC3 204
-param set-default PWM_MAIN_FUNC4 205
-param set-default PWM_MAIN_FUNC5 101
-param set-default PWM_MAIN_FUNC6 201
-param set-default PWM_MAIN_FUNC7 202
-param set-default PWM_MAIN_FUNC8 203
-param set-default PWM_MAIN_FUNC9 206
-param set-default PWM_MAIN_REV 256
-
+set MIXER_FILE etc/mixers-sitl/plane_sitl.main.mix
+set MIXER custom
@@ -10,6 +10,7 @@ param set-default EKF2_MAG_YAWLIM 0

 param set-default FW_LND_AIRSPD_SC 1
 param set-default FW_LND_ANG 8
+param set-default FW_THR_LND_MAX 0

 param set-default FW_L1_PERIOD 15

@@ -35,28 +36,5 @@ param set-default NAV_DLL_ACT 2

 param set-default RWTO_TKOFF 1

-param set-default CA_AIRFRAME 1
-
-param set-default CA_ROTOR_COUNT 1
-param set-default CA_ROTOR0_PX 0.3
-
-param set-default CA_SV_CS_COUNT 6
-param set-default CA_SV_CS0_TRQ_R -0.5
-param set-default CA_SV_CS0_TYPE 1
-param set-default CA_SV_CS1_TRQ_R 0.5
-param set-default CA_SV_CS1_TYPE 2
-param set-default CA_SV_CS2_TRQ_P 1.0
-param set-default CA_SV_CS2_TYPE 3
-param set-default CA_SV_CS3_TRQ_Y 1.0
-param set-default CA_SV_CS3_TYPE 4
-param set-default CA_SV_CS4_TYPE 9
-param set-default CA_SV_CS5_TYPE 10
-param set-default PWM_MAIN_FUNC3 204
-param set-default PWM_MAIN_FUNC4 205
-param set-default PWM_MAIN_FUNC5 101
-param set-default PWM_MAIN_FUNC6 201
-param set-default PWM_MAIN_FUNC7 202
-param set-default PWM_MAIN_FUNC8 203
-param set-default PWM_MAIN_FUNC9 206
-param set-default PWM_MAIN_REV 256
-
+set MIXER_FILE etc/mixers-sitl/plane_sitl.main.mix
+set MIXER custom
@@ -7,9 +7,12 @@

 param set-default FW_LND_AIRSPD_SC 1.1
 param set-default FW_LND_ANG 5
+param set-default FW_THR_LND_MAX 0
+param set-default FW_LND_HHDIST 30
 param set-default FW_LND_FL_PMIN 9.5
 param set-default FW_LND_FL_PMAX 20
 param set-default FW_LND_FLALT 5
+param set-default FW_LND_TLALT 15

 param set-default FW_L1_PERIOD 25

@@ -34,31 +37,9 @@ param set-default NAV_DLL_ACT 2

 param set-default RWTO_TKOFF 1
 param set-default RWTO_MAX_PITCH 20
+param set-default RWTO_MAX_ROLL 10
 param set-default RWTO_PSP 8
 param set-default RWTO_AIRSPD_SCL 1.8

-param set-default CA_AIRFRAME 1
-
-param set-default CA_ROTOR_COUNT 1
-param set-default CA_ROTOR0_PX 0.3
-
-param set-default CA_SV_CS_COUNT 6
-param set-default CA_SV_CS0_TRQ_R -0.5
-param set-default CA_SV_CS0_TYPE 1
-param set-default CA_SV_CS1_TRQ_R 0.5
-param set-default CA_SV_CS1_TYPE 2
-param set-default CA_SV_CS2_TRQ_P 1.0
-param set-default CA_SV_CS2_TYPE 3
-param set-default CA_SV_CS3_TRQ_Y 1.0
-param set-default CA_SV_CS3_TYPE 4
-param set-default CA_SV_CS4_TYPE 9
-param set-default CA_SV_CS5_TYPE 10
-param set-default PWM_MAIN_FUNC3 204
-param set-default PWM_MAIN_FUNC4 205
-param set-default PWM_MAIN_FUNC5 101
-param set-default PWM_MAIN_FUNC6 201
-param set-default PWM_MAIN_FUNC7 202
-param set-default PWM_MAIN_FUNC8 203
-param set-default PWM_MAIN_FUNC9 206
-param set-default PWM_MAIN_REV 256
-
+set MIXER_FILE etc/mixers-sitl/plane_sitl.main.mix
+set MIXER custom
@@ -10,12 +10,16 @@ param set-default EKF2_MAG_YAWLIM 0

 param set-default FW_LND_AIRSPD_SC 1
 param set-default FW_LND_ANG 8
+param set-default FW_THR_LND_MAX 0

 param set-default FW_L1_PERIOD 12

+param set-default FW_MAN_P_MAX 30
+
 param set-default FW_PR_P 0.9
 param set-default FW_PR_FF 0.2
 param set-default FW_PSP_OFF 2
+param set-default FW_P_LIM_MAX 32
 param set-default FW_P_LIM_MIN -15

 param set-default FW_RR_FF 0.1
@@ -23,7 +27,7 @@ param set-default FW_RR_P 0.3

 param set-default FW_THR_MAX 0.6
 param set-default FW_THR_MIN 0.05
-param set-default FW_THR_TRIM 0.25
+param set-default FW_THR_CRUISE 0.25

 param set-default FW_T_ALT_TC 2
 param set-default FW_T_CLMB_MAX 8
@@ -40,32 +44,7 @@ param set-default MIS_TAKEOFF_ALT 30
 param set-default NAV_ACC_RAD 15
 param set-default NAV_DLL_ACT 2

-param set-default FW_USE_NPFG 1
-
 param set-default RWTO_TKOFF 1

-param set-default CA_AIRFRAME 1
-
-param set-default CA_ROTOR_COUNT 1
-param set-default CA_ROTOR0_PX 0.3
-
-param set-default CA_SV_CS_COUNT 6
-param set-default CA_SV_CS0_TRQ_R -0.5
-param set-default CA_SV_CS0_TYPE 1
-param set-default CA_SV_CS1_TRQ_R 0.5
-param set-default CA_SV_CS1_TYPE 2
-param set-default CA_SV_CS2_TRQ_P 1.0
-param set-default CA_SV_CS2_TYPE 3
-param set-default CA_SV_CS3_TRQ_Y 1.0
-param set-default CA_SV_CS3_TYPE 4
-param set-default CA_SV_CS4_TYPE 9
-param set-default CA_SV_CS5_TYPE 10
-param set-default PWM_MAIN_FUNC3 204
-param set-default PWM_MAIN_FUNC4 205
-param set-default PWM_MAIN_FUNC5 101
-param set-default PWM_MAIN_FUNC6 201
-param set-default PWM_MAIN_FUNC7 202
-param set-default PWM_MAIN_FUNC8 203
-param set-default PWM_MAIN_FUNC9 206
-param set-default PWM_MAIN_REV 256
-
+set MIXER_FILE etc/mixers-sitl/plane_sitl.main.mix
+set MIXER custom
@@ -5,5 +5,5 @@

 . ${R}etc/init.d-posix/airframes/1030_plane

-param set-default FW_THR_TRIM 0.0
+param set-default FW_THR_CRUISE 0.0
 param set-default RWTO_TKOFF 0
@@ -1,70 +0,0 @@
-#!/bin/sh
-#
-# @name Advanced Plane SITL
-#
-
-. ${R}etc/init.d/rc.fw_defaults
-
-param set-default EKF2_MAG_ACCLIM 0
-param set-default EKF2_MAG_YAWLIM 0
-
-param set-default FW_LND_AIRSPD_SC 1
-param set-default FW_LND_ANG 8
-param set-default FW_THR_LND_MAX 0
-
-param set-default FW_L1_PERIOD 12
-
-param set-default FW_MAN_P_MAX 30
-
-param set-default FW_PSP_OFF 2
-param set-default FW_P_LIM_MAX 32
-param set-default FW_P_LIM_MIN -15
-
-param set-default FW_SPOILERS_LND 0.4
-
-param set-default FW_THR_MIN 0.05
-param set-default FW_THR_TRIM 0.25
-
-param set-default FW_T_CLMB_MAX 8
-param set-default FW_T_SINK_MAX 2.7
-param set-default FW_T_SINK_MIN 2.2
-
-param set-default FW_W_EN 1
-
-param set-default MIS_LTRMIN_ALT 30
-param set-default MIS_TAKEOFF_ALT 30
-
-param set-default NAV_ACC_RAD 15
-param set-default NAV_DLL_ACT 2
-
-param set-default RWTO_TKOFF 1
-
-#param set-default SYS_CTRL_ALLOC 1
-param set-default CA_AIRFRAME 1
-
-param set-default CA_ROTOR_COUNT 1
-param set-default CA_ROTOR0_PX 0.3
-
-param set-default CA_SV_CS_COUNT 6
-param set-default CA_SV_CS0_TRQ_R -0.5
-param set-default CA_SV_CS0_TYPE 1
-param set-default CA_SV_CS1_TRQ_R 0.5
-param set-default CA_SV_CS1_TYPE 2
-param set-default CA_SV_CS2_TRQ_P 1.0
-param set-default CA_SV_CS2_TYPE 3
-param set-default CA_SV_CS3_TRQ_Y 1.0
-param set-default CA_SV_CS3_TYPE 4
-param set-default CA_SV_CS4_TYPE 9
-param set-default CA_SV_CS5_TYPE 10
-param set-default PWM_MAIN_FUNC3 204
-param set-default PWM_MAIN_FUNC4 205
-param set-default PWM_MAIN_FUNC5 101
-param set-default PWM_MAIN_FUNC6 201
-param set-default PWM_MAIN_FUNC7 202
-param set-default PWM_MAIN_FUNC8 203
-param set-default PWM_MAIN_FUNC9 206
-param set-default PWM_MAIN_REV 256
-
-
-set MIXER_FILE etc/mixers-sitl/plane_sitl.main.mix
-set MIXER custom
@@ -7,61 +7,22 @@

 . ${R}etc/init.d/rc.vtol_defaults

-# TODO: Enable motor failure detection when the
-# VTOL no longer reports 0A for all ESCs in SITL
-param set-default FD_ACT_EN 0
-param set-default FD_ACT_MOT_TOUT 500
-
-param set-default CA_AIRFRAME 2
-
-param set-default CA_ROTOR_COUNT 5
-param set-default CA_ROTOR0_PX 0.1515
-param set-default CA_ROTOR0_PY 0.245
-param set-default CA_ROTOR0_KM 0.05
-param set-default CA_ROTOR1_PX -0.1515
-param set-default CA_ROTOR1_PY -0.1875
-param set-default CA_ROTOR1_KM 0.05
-param set-default CA_ROTOR2_PX 0.1515
-param set-default CA_ROTOR2_PY -0.245
-param set-default CA_ROTOR2_KM -0.05
-param set-default CA_ROTOR3_PX -0.1515
-param set-default CA_ROTOR3_PY 0.1875
-param set-default CA_ROTOR3_KM -0.05
-param set-default CA_ROTOR4_AX 1.0
-param set-default CA_ROTOR4_AZ 0.0
-param set-default CA_ROTOR4_PX 0.2
-
-param set-default CA_SV_CS_COUNT 3
-param set-default CA_SV_CS0_TYPE 1
-param set-default CA_SV_CS0_TRQ_R -0.5
-param set-default CA_SV_CS1_TYPE 2
-param set-default CA_SV_CS1_TRQ_R 0.5
-param set-default CA_SV_CS2_TYPE 3
-param set-default CA_SV_CS2_TRQ_P 1.0
-param set-default PWM_MAIN_FUNC1 101
-param set-default PWM_MAIN_FUNC2 102
-param set-default PWM_MAIN_FUNC3 103
-param set-default PWM_MAIN_FUNC4 104
-param set-default PWM_MAIN_FUNC5 105
-param set-default PWM_MAIN_FUNC6 201
-param set-default PWM_MAIN_FUNC7 202
-param set-default PWM_MAIN_FUNC8 203
-
 param set-default FW_L1_PERIOD 12
+param set-default FW_MAN_P_MAX 30
 param set-default FW_PR_FF 0.2
 param set-default FW_PR_P 0.9
 param set-default FW_PSP_OFF 2
+param set-default FW_P_LIM_MAX 32
 param set-default FW_P_LIM_MIN -15
 param set-default FW_RR_FF 0.1
 param set-default FW_RR_P 0.3
-param set-default FW_THR_TRIM 0.25
+param set-default FW_THR_CRUISE 0.25
 param set-default FW_THR_MAX 0.6
 param set-default FW_THR_MIN 0.05
 param set-default FW_T_CLMB_MAX 8
 param set-default FW_T_SINK_MAX 2.7
 param set-default FW_T_SINK_MIN 2.2

-param set-default MC_AIRMODE 1
 param set-default MC_ROLLRATE_P 0.3
 param set-default MC_YAW_P 1.6

@@ -74,9 +35,16 @@ param set-default MPC_XY_VEL_I_ACC 4
 param set-default MPC_XY_VEL_D_ACC 0.1

 param set-default NAV_ACC_RAD 5
+param set-default NAV_LOITER_RAD 80

 param set-default VT_FWD_THRUST_EN 4
 param set-default VT_F_TRANS_THR 0.75
+param set-default VT_MOT_ID 1234
+param set-default VT_FW_MOT_OFFID 1234
 param set-default VT_B_TRANS_DUR 8
 param set-default VT_TYPE 2

+set MAV_TYPE 22
+
+set MIXER_FILE etc/mixers-sitl/standard_vtol_sitl.main.mix
+set MIXER custom
@@ -7,48 +7,15 @@

 . ${R}etc/init.d/rc.vtol_defaults

-param set-default MAV_TYPE 20
-
-param set-default CA_AIRFRAME 4
-
-param set-default CA_ROTOR_COUNT 4
-param set-default CA_ROTOR0_PX 1
-param set-default CA_ROTOR0_PY 2
-param set-default CA_ROTOR0_KM 0.05
-param set-default CA_ROTOR1_PX -1
-param set-default CA_ROTOR1_PY -1
-param set-default CA_ROTOR1_KM 0.05
-param set-default CA_ROTOR2_PX 1
-param set-default CA_ROTOR2_PY -1
-param set-default CA_ROTOR2_KM -0.05
-param set-default CA_ROTOR3_PX -1
-param set-default CA_ROTOR3_PY 1
-param set-default CA_ROTOR3_KM -0.05
-
-param set-default CA_SV_CS_COUNT 2
-param set-default CA_SV_CS0_TYPE 5
-param set-default CA_SV_CS0_TRQ_P 0.5
-param set-default CA_SV_CS0_TRQ_Y -0.5
-param set-default CA_SV_CS1_TYPE 6
-param set-default CA_SV_CS1_TRQ_P 0.5
-param set-default CA_SV_CS1_TRQ_Y 0.5
-
-param set-default PWM_MAIN_FUNC1 101
-param set-default PWM_MAIN_FUNC2 102
-param set-default PWM_MAIN_FUNC3 103
-param set-default PWM_MAIN_FUNC4 104
-param set-default PWM_MAIN_FUNC5 0
-param set-default PWM_MAIN_FUNC6 201
-param set-default PWM_MAIN_FUNC7 202
-param set-default PWM_MAIN_REV 96 # invert both elevons
-
 param set-default FW_L1_PERIOD 12
+param set-default FW_MAN_P_MAX 30
 param set-default FW_PR_I 0.2
-param set-default FW_PR_P 0.2
+param set-default FW_PR_P 0.3
 param set-default FW_PSP_OFF 2
+param set-default FW_P_LIM_MAX 32
 param set-default FW_P_LIM_MIN -15
-param set-default FW_RR_P 0.2
-param set-default FW_THR_TRIM 0.33
+param set-default FW_RR_P 0.3
+param set-default FW_THR_CRUISE 0.33
 param set-default FW_THR_MAX 0.6
 param set-default FW_THR_MIN 0.05
 param set-default FW_T_ALT_TC 2
@@ -58,7 +25,6 @@ param set-default FW_T_SINK_MAX 2.7
 param set-default FW_T_SINK_MIN 2.2
 param set-default FW_T_TAS_TC 2

-param set-default MC_AIRMODE 1
 param set-default MC_ROLLRATE_P 0.3

 param set-default MPC_ACC_HOR_MAX 2
@@ -68,12 +34,15 @@ param set-default MPC_XY_VEL_I_ACC 4
 param set-default MPC_XY_VEL_D_ACC 0.1

 param set-default NAV_ACC_RAD 5
+param set-default NAV_LOITER_RAD 80

-param set-default VT_FW_DIFTHR_EN 1
-param set-default VT_FW_DIFTHR_SC 0.5
 param set-default VT_F_TRANS_DUR 1.5
 param set-default VT_F_TRANS_THR 0.7
 param set-default VT_TYPE 0

 param set-default WV_EN 0

+set MAV_TYPE 20
+
+set MIXER_FILE etc/mixers-sitl/quad_x_vtol.main.mix
+set MIXER custom
@@ -7,71 +7,42 @@

 . ${R}etc/init.d/rc.vtol_defaults

-param set-default MAV_TYPE 21
-
-param set-default CA_AIRFRAME 3
-
-param set-default CA_ROTOR_COUNT 4
-param set-default CA_ROTOR0_PX 0.1515
-param set-default CA_ROTOR0_PY 0.245
-param set-default CA_ROTOR0_KM 0.05
-param set-default CA_ROTOR1_PX -0.1515
-param set-default CA_ROTOR1_PY -0.1875
-param set-default CA_ROTOR1_KM 0.05
-param set-default CA_ROTOR2_PX 0.1515
-param set-default CA_ROTOR2_PY -0.245
-param set-default CA_ROTOR2_KM -0.05
-param set-default CA_ROTOR3_PX -0.1515
-param set-default CA_ROTOR3_PY 0.1875
-param set-default CA_ROTOR3_KM -0.05
-
-param set-default CA_ROTOR0_TILT 1
-param set-default CA_ROTOR2_TILT 2
-param set-default CA_SV_CS0_TRQ_R -0.5
-param set-default CA_SV_CS0_TYPE 1
-param set-default CA_SV_CS1_TRQ_R 0.5
-param set-default CA_SV_CS1_TYPE 2
-param set-default CA_SV_CS2_TRQ_P 1.0
-param set-default CA_SV_CS2_TYPE 3
-param set-default CA_SV_CS_COUNT 3
-param set-default CA_SV_TL_COUNT 2
-
-param set-default PWM_MAIN_FUNC1 101
-param set-default PWM_MAIN_FUNC2 102
-param set-default PWM_MAIN_FUNC3 103
-param set-default PWM_MAIN_FUNC4 104
-param set-default PWM_MAIN_FUNC5 204
-param set-default PWM_MAIN_FUNC6 205
-param set-default PWM_MAIN_FUNC7 201
-param set-default PWM_MAIN_FUNC8 202
-param set-default PWM_MAIN_FUNC9 203
-
 param set-default FW_L1_PERIOD 12
+param set-default FW_MAN_P_MAX 30
 param set-default FW_PR_FF 0.2
 param set-default FW_PR_P 0.9
 param set-default FW_PSP_OFF 2
+param set-default FW_P_LIM_MAX 32
 param set-default FW_P_LIM_MIN -15
 param set-default FW_RR_FF 0.1
 param set-default FW_RR_P 0.3
-param set-default FW_THR_TRIM 0.38
+param set-default FW_THR_CRUISE 0.38
 param set-default FW_THR_MAX 0.6
 param set-default FW_THR_MIN 0.05
 param set-default FW_T_CLMB_MAX 8
 param set-default FW_T_SINK_MAX 2.7
 param set-default FW_T_SINK_MIN 2.2

-param set-default MC_AIRMODE 1
-param set-default MC_YAWRATE_P 0.3
-param set-default MC_YAWRATE_I 0.3
+param set-default MC_YAW_P 1.6

+param set-default MIS_TAKEOFF_ALT 10
+
+param set-default MPC_ACC_HOR_MAX 2
+param set-default MPC_XY_P 0.8
 param set-default MPC_XY_VEL_P_ACC 3
 param set-default MPC_XY_VEL_I_ACC 4
 param set-default MPC_XY_VEL_D_ACC 0.1

-param set-default MIS_TAKEOFF_ALT 10
+param set-default NAV_ACC_RAD 5
+param set-default NAV_LOITER_RAD 80

 param set-default VT_B_TRANS_DUR 8
 param set-default VT_FWD_THRUST_EN 4
-param set-default VT_FWD_THRUST_SC 0.6
+param set-default VT_MOT_ID 1234
 param set-default VT_TILT_TRANS 0.6
 param set-default VT_TYPE 1
+
+set MAV_TYPE 21
+
+set MIXER_FILE etc/mixers-sitl/tiltrotor_sitl.main.mix
+set MIXER custom
@@ -5,14 +5,53 @@
 # @type Standard VTOL
 #

-. ${R}etc/init.d-posix/airframes/1040_standard_vtol
+. ${R}etc/init.d/rc.vtol_defaults

-# Gimbal
-param set-default PWM_MAIN_FUNC9 420
-param set-default PWM_MAIN_FUNC10 421
-param set-default PWM_MAIN_FUNC11 422
+param set-default FW_L1_PERIOD 12
+param set-default FW_MAN_P_MAX 30
+param set-default FW_PR_FF 0.2
+param set-default FW_PR_P 0.9
+param set-default FW_PSP_OFF 2
+param set-default FW_P_LIM_MAX 32
+param set-default FW_P_LIM_MIN -15
+param set-default FW_RR_FF 0.1
+param set-default FW_RR_P 0.3
+param set-default FW_THR_CRUISE 0.25
+param set-default FW_THR_MAX 0.6
+param set-default FW_THR_MIN 0.05
+param set-default FW_T_ALT_TC 2
+param set-default FW_T_CLMB_MAX 8
+param set-default FW_T_HRATE_FF 0.5
+param set-default FW_T_SINK_MAX 2.7
+param set-default FW_T_SINK_MIN 2.2
+param set-default FW_T_TAS_TC 2
+
+param set-default MC_ROLLRATE_P 0.3
+param set-default MC_YAW_P 1.6
+
+param set-default MIS_TAKEOFF_ALT 10
+
+param set-default MPC_ACC_HOR_MAX 2
+param set-default MPC_XY_P 0.8
+param set-default MPC_XY_VEL_P_ACC 3
+param set-default MPC_XY_VEL_I_ACC 4
+param set-default MPC_XY_VEL_D_ACC 0.1
+
+param set-default NAV_ACC_RAD 5
+param set-default NAV_LOITER_RAD 80
+
+param set-default VT_FWD_THRUST_EN 4
+param set-default VT_F_TRANS_THR 0.75
+param set-default VT_MOT_ID 1234
+param set-default VT_FW_MOT_OFFID 1234
+param set-default VT_B_TRANS_DUR 8
+param set-default VT_TYPE 2

 param set-default RC_MAP_AUX1 8
 param set-default RC_MAP_AUX2 9
 param set-default RC_MAP_AUX3 10

+set MAV_TYPE 22
+
+set MIXER_FILE etc/mixers-sitl/standard_vtol_sitl.main.mix
+set MIXER custom
@@ -0,0 +1 @@
+mixer append /dev/pwm_output0 etc/mixers-sitl/package_drop.aux.mix
@@ -28,11 +28,6 @@ param set-default CBRK_AIRSPD_CHK 162128
 param set-default GND_MAX_ANG 0.6
 param set-default GND_WHEEL_BASE 2.0

-param set-default CA_AIRFRAME 5
-
-param set-default CA_R_REV 1
-param set-default PWM_MAIN_FUNC1 201
-param set-default PWM_MAIN_FUNC2 201
-param set-default PWM_MAIN_FUNC6 101
-param set-default PWM_MAIN_FUNC7 101
+set MAV_TYPE 10

+set MIXER_FILE etc/mixers-sitl/rover_ackermann_sitl.main.mix
@@ -28,11 +28,6 @@ param set-default CBRK_AIRSPD_CHK 162128
 param set-default GND_MAX_ANG 0.6
 param set-default GND_WHEEL_BASE 2.0

-param set-default CA_AIRFRAME 6
-
-param set-default CA_R_REV 3
-param set-default PWM_MAIN_FUNC1 101
-param set-default PWM_MAIN_FUNC2 101
-param set-default PWM_MAIN_FUNC6 102
-param set-default PWM_MAIN_FUNC7 102
+set MAV_TYPE 10

+set MIXER_FILE etc/mixers-sitl/rover_diff_sitl.main.mix
@@ -10,8 +10,6 @@

 . ${R}etc/init.d/rc.rover_defaults

-param set-default MAV_TYPE 10
-
 param set-default GND_L1_DIST 5
 param set-default GND_SP_CTRL_MODE 1
 param set-default GND_SPEED_D 3
@@ -35,11 +33,6 @@ param set-default CBRK_AIRSPD_CHK 162128
 param set-default GND_MAX_ANG 0.6
 param set-default GND_WHEEL_BASE 3.0

-param set-default CA_AIRFRAME 5
-
-param set-default CA_R_REV 1
-param set-default PWM_MAIN_FUNC1 201
-param set-default PWM_MAIN_FUNC2 201
-param set-default PWM_MAIN_FUNC6 101
-param set-default PWM_MAIN_FUNC7 101
+set MAV_TYPE 10

+set MIXER_FILE etc/mixers-sitl/rover_ackermann_sitl.main.mix
@@ -28,21 +28,6 @@ param set-default CBRK_AIRSPD_CHK 162128
 param set-default GND_MAX_ANG 0.6
 param set-default GND_WHEEL_BASE 2.0

-param set-default CA_AIRFRAME 9
-
-param set-default CA_ROTOR_COUNT 2
-param set-default CA_ROTOR0_AX 1
-param set-default CA_ROTOR0_AZ 0
-param set-default CA_ROTOR0_KM 0
-param set-default CA_ROTOR0_PX -2
-param set-default CA_ROTOR0_PY -1
-param set-default CA_ROTOR1_AX 1
-param set-default CA_ROTOR1_AZ 0
-param set-default CA_ROTOR1_KM 0
-param set-default CA_ROTOR1_PX -2
-param set-default CA_ROTOR1_PY 1
-param set-default CA_R_REV 3
-
-param set-default PWM_MAIN_FUNC1 101
-param set-default PWM_MAIN_FUNC2 102
+set MAV_TYPE 11

+set MIXER_FILE etc/mixers-sitl/boat_sitl.main.mix
@@ -38,31 +38,12 @@ param set-default FW_P_LIM_MAX 25
 param set-default FW_P_LIM_MIN -5
 param set-default FW_R_LIM 30

+param set-default FW_MAN_P_MAX 30.0
 param set-default FW_MAN_R_MAX 30.0

-param set-default FW_THR_TRIM 0.8
+param set-default FW_THR_CRUISE 0.8
 param set-default FW_THR_IDLE 0
 param set-default COM_DISARM_PRFLT 0

-param set-default CA_AIRFRAME 1
-
-param set-default CA_ROTOR_COUNT 1
-param set-default CA_ROTOR0_PX 0.3
-
-param set-default CA_SV_CS_COUNT 3
-param set-default CA_SV_CS0_TRQ_R 0
-param set-default CA_SV_CS0_TRQ_Y 1
-param set-default CA_SV_CS0_TYPE 4
-param set-default CA_SV_CS1_TRQ_P 0
-param set-default CA_SV_CS1_TRQ_R -0.5
-param set-default CA_SV_CS1_TYPE 1
-param set-default CA_SV_CS2_TRQ_P 1
-param set-default CA_SV_CS2_TYPE 3
-param set-default PWM_MAIN_FUNC1 201
-param set-default PWM_MAIN_FUNC2 101
-param set-default PWM_MAIN_FUNC3 202
-param set-default PWM_MAIN_FUNC4 203
-param set-default PWM_MAIN_FUNC5 407
-param set-default PWM_MAIN_FUNC6 408
-param set-default PWM_MAIN_FUNC7 409
-
+set MIXER_FILE etc/mixers-sitl/autogyro_sitl.main.mix
+set MIXER custom
@@ -1,74 +0,0 @@
-#!/bin/sh
-#
-# @name ThunderFly TF-G2
-# ThunderFly TF-G2 autogyro airframe. Only for FlightGear simulator
-#
-# @type Autogyro
-# @class Autogyro
-#
-# @url https://github.com/ThunderFly-aerospace/TF-G2/
-#
-#
-
-. ${R}etc/init.d/rc.fw_defaults
-
-param set-default FW_AIRSPD_STALL 5
-
-param set-default FW_P_RMAX_NEG 20.0
-param set-default FW_W_RMAX 10
-param set-default FW_W_EN 1
-
-param set-default FW_RR_P 0.08
-
-param set-default MIS_LTRMIN_ALT 50
-param set-default MIS_TAKEOFF_ALT 7
-
-param set-default NAV_ACC_RAD 20
-param set-default NAV_DLL_ACT 2
-param set-default NAV_LOITER_RAD 50
-
-param set-default RWTO_TKOFF 0
-# Parameters related to autogyro takeoff PR
-#param set-default AG_TKOFF 1
-#param set-default AG_PROT_TYPE 1
-#param set-default AG_PROT_MIN_RPM 50.0
-#param set-default AG_PROT_TRG_RPM 900.0
-#param set-defoult AG_ROTOR_RPM 900.0
-
-param set-default FW_ARSP_SCALE_EN 0
-
-param set-default FW_AIRSPD_MAX 35
-param set-default FW_AIRSPD_MIN 7
-
-param set-default FW_P_LIM_MAX 25
-param set-default FW_P_LIM_MIN -5
-param set-default FW_R_LIM 30
-
-param set-default FW_MAN_R_MAX 30.0
-
-param set-default FW_THR_CRUISE 0.8
-param set-default FW_THR_IDLE 0
-param set-default COM_DISARM_PRFLT 0
-
-param set-default CA_AIRFRAME 1
-
-param set-default CA_ROTOR_COUNT 1
-param set-default CA_ROTOR0_PX 0.3
-
-param set-default CA_SV_CS_COUNT 3
-param set-default CA_SV_CS0_TRQ_R 0
-param set-default CA_SV_CS0_TRQ_Y 1
-param set-default CA_SV_CS0_TYPE 4
-param set-default CA_SV_CS1_TRQ_P 0
-param set-default CA_SV_CS1_TRQ_R -0.5
-param set-default CA_SV_CS1_TYPE 1
-param set-default CA_SV_CS2_TRQ_P 1
-param set-default CA_SV_CS2_TYPE 3
-param set-default PWM_MAIN_FUNC1 201
-param set-default PWM_MAIN_FUNC2 101
-param set-default PWM_MAIN_FUNC3 202
-param set-default PWM_MAIN_FUNC4 203
-param set-default PWM_MAIN_FUNC5 407
-param set-default PWM_MAIN_FUNC6 408
-param set-default PWM_MAIN_FUNC7 409
-
@@ -11,29 +11,5 @@

 . ${R}etc/init.d/rc.airship_defaults

-param set-default CA_AIRFRAME 9
-
-param set-default CA_ROTOR_COUNT 3
-param set-default CA_ROTOR0_AX 1.0000
-param set-default CA_ROTOR0_AZ 0.0000
-param set-default CA_ROTOR0_KM 0.0000
-param set-default CA_ROTOR0_PY 2.0000
-param set-default CA_ROTOR1_AX 1.0000
-param set-default CA_ROTOR1_AZ 0.0000
-param set-default CA_ROTOR1_KM 0.0000
-param set-default CA_ROTOR1_PY -2.0000
-param set-default CA_ROTOR2_AY -1.0000
-param set-default CA_ROTOR2_AZ 0.0000
-param set-default CA_ROTOR2_KM 0.0000
-param set-default CA_ROTOR2_PX -10.0000
-
-param set-default CA_SV_CS_COUNT 1
-param set-default CA_SV_CS0_TRQ_P 1.0000
-
-param set-default CA_R_REV 7
-
-param set-default PWM_MAIN_FUNC1 101
-param set-default PWM_MAIN_FUNC2 102
-param set-default PWM_MAIN_FUNC3 201
-param set-default PWM_MAIN_FUNC4 103
-
+set MIXER cloudship
+set PWM_OUT 1234
@@ -9,24 +9,4 @@

 . ${R}etc/init.d/rc.mc_defaults

-
-param set-default CA_AIRFRAME 0
-
-param set-default CA_ROTOR_COUNT 4
-param set-default CA_ROTOR0_PX 0.1515
-param set-default CA_ROTOR0_PY 0.245
-param set-default CA_ROTOR0_KM 0.05
-param set-default CA_ROTOR1_PX -0.1515
-param set-default CA_ROTOR1_PY -0.1875
-param set-default CA_ROTOR1_KM 0.05
-param set-default CA_ROTOR2_PX 0.1515
-param set-default CA_ROTOR2_PY -0.245
-param set-default CA_ROTOR2_KM -0.05
-param set-default CA_ROTOR3_PX -0.1515
-param set-default CA_ROTOR3_PY 0.1875
-param set-default CA_ROTOR3_KM -0.05
-
-param set-default PWM_MAIN_FUNC1 101
-param set-default PWM_MAIN_FUNC2 102
-param set-default PWM_MAIN_FUNC3 103
-param set-default PWM_MAIN_FUNC4 104
+set MIXER quad_w
@@ -9,8 +9,6 @@

 . ${R}etc/init.d/rc.mc_defaults

-param set-default MAV_TYPE 13
-
 param set-default MC_PITCHRATE_P 0.1
 param set-default MC_PITCHRATE_I 0.05
 param set-default MC_PITCH_P 6.0
@@ -26,29 +24,6 @@ param set-default TRIG_MODE 4
 param set-default MNT_MODE_IN 4
 param set-default MNT_DO_STAB 2

+set MAV_TYPE 13

-param set-default CA_ROTOR0_PX 0.0
-param set-default CA_ROTOR0_PY 1.0
-param set-default CA_ROTOR0_KM -0.05
-param set-default CA_ROTOR1_PX 0.0
-param set-default CA_ROTOR1_PY -1.0
-param set-default CA_ROTOR1_KM 0.05
-param set-default CA_ROTOR2_PX 0.866025
-param set-default CA_ROTOR2_PY -0.5
-param set-default CA_ROTOR2_KM -0.05
-param set-default CA_ROTOR3_PX -0.866025
-param set-default CA_ROTOR3_PY 0.5
-param set-default CA_ROTOR3_KM 0.05
-param set-default CA_ROTOR4_PX 0.866025
-param set-default CA_ROTOR4_PY 0.5
-param set-default CA_ROTOR4_KM 0.05
-param set-default CA_ROTOR5_PX -0.866025
-param set-default CA_ROTOR5_PY -0.5
-param set-default CA_ROTOR5_KM -0.05
-
-param set-default PWM_MAIN_FUNC1 101
-param set-default PWM_MAIN_FUNC2 102
-param set-default PWM_MAIN_FUNC3 103
-param set-default PWM_MAIN_FUNC4 104
-param set-default PWM_MAIN_FUNC5 105
-param set-default PWM_MAIN_FUNC6 106
+set MIXER hexa_x
@@ -1,48 +0,0 @@
-#!/bin/sh
-#
-# @name Gazebo x500
-#
-# @type Quadrotor
-#
-
-. ${R}etc/init.d/rc.mc_defaults
-
-PX4_SIMULATOR=${PX4_SIMULATOR:=gz}
-PX4_GZ_WORLD=${PX4_GZ_WORLD:=default}
-PX4_SIM_MODEL=${PX4_SIM_MODEL:=x500}
-
-param set-default CA_AIRFRAME 0
-param set-default CA_ROTOR_COUNT 4
-
-param set-default CA_ROTOR0_PX 0.13
-param set-default CA_ROTOR0_PY 0.22
-param set-default CA_ROTOR0_KM  0.05
-
-param set-default CA_ROTOR1_PX -0.13
-param set-default CA_ROTOR1_PY -0.20
-param set-default CA_ROTOR1_KM  0.05
-
-param set-default CA_ROTOR2_PX 0.13
-param set-default CA_ROTOR2_PY -0.22
-param set-default CA_ROTOR2_KM -0.05
-
-param set-default CA_ROTOR3_PX -0.13
-param set-default CA_ROTOR3_PY 0.20
-param set-default CA_ROTOR3_KM -0.05
-
-param set-default SIM_GZ_FUNC1 101
-param set-default SIM_GZ_FUNC2 102
-param set-default SIM_GZ_FUNC3 103
-param set-default SIM_GZ_FUNC4 104
-
-param set-default SIM_GZ_MIN1 150
-param set-default SIM_GZ_MIN2 150
-param set-default SIM_GZ_MIN3 150
-param set-default SIM_GZ_MIN4 150
-
-param set-default SIM_GZ_MAX1 1000
-param set-default SIM_GZ_MAX2 1000
-param set-default SIM_GZ_MAX3 1000
-param set-default SIM_GZ_MAX4 1000
-
-param set-default MPC_THR_HOVER 0.60
@@ -7,8 +7,6 @@

 . ${R}etc/init.d/rc.mc_defaults

-param set-default MAV_TYPE 13
-
 param set-default MC_PITCHRATE_P 0.0800
 param set-default MC_PITCHRATE_I 0.0400
 param set-default MC_PITCHRATE_D 0.0010
@@ -28,39 +26,6 @@ param set-default MNT_MODE_IN 4
 param set-default MNT_MODE_OUT 2
 param set-default MAV_PROTO_VER 2

-param set-default CA_AIRFRAME 0
-param set-default CA_ROTOR_COUNT 6
-
-param set-default CA_ROTOR0_PX 0.0
-param set-default CA_ROTOR0_PY 1.0
-param set-default CA_ROTOR0_KM -0.05
-param set-default CA_ROTOR1_PX 0.0
-param set-default CA_ROTOR1_PY -1.0
-param set-default CA_ROTOR1_KM 0.05
-param set-default CA_ROTOR2_PX 0.866025
-param set-default CA_ROTOR2_PY -0.5
-param set-default CA_ROTOR2_KM -0.05
-param set-default CA_ROTOR3_PX -0.866025
-param set-default CA_ROTOR3_PY 0.5
-param set-default CA_ROTOR3_KM 0.05
-param set-default CA_ROTOR4_PX 0.866025
-param set-default CA_ROTOR4_PY 0.5
-param set-default CA_ROTOR4_KM 0.05
-param set-default CA_ROTOR5_PX -0.866025
-param set-default CA_ROTOR5_PY -0.5
-param set-default CA_ROTOR5_KM -0.05
-
-param set-default PWM_MAIN_FUNC1 101
-param set-default PWM_MAIN_FUNC2 102
-param set-default PWM_MAIN_FUNC3 103
-param set-default PWM_MAIN_FUNC4 104
-param set-default PWM_MAIN_FUNC5 105
-param set-default PWM_MAIN_FUNC6 106
-# Gimbal
-param set-default PWM_MAIN_FUNC7 420
-param set-default PWM_MAIN_FUNC8 421
-param set-default PWM_MAIN_FUNC9 422
-# Landing gear
-param set-default PWM_MAIN_FUNC10 400
-param set-default PWM_MAIN_FUNC11 400
+set MAV_TYPE 13

+set MIXER hexa_x
@@ -1,4 +1,6 @@

+mixer append /dev/pwm_output0 etc/mixers/mount_legs.aux.mix
+
 mavlink start -x -u 14558 -r 4000 -f -m onboard -o 14530 -p

 # shellcheck disable=SC2154
@@ -0,0 +1,64 @@
+#!/bin/sh
+#
+# @name Typhoon H480 SITL
+#
+# @type Hexarotor x
+#
+
+. ${R}etc/init.d/rc.mc_defaults
+
+param set-default SYS_CTRL_ALLOC 1
+
+param set-default MC_PITCHRATE_P 0.0800
+param set-default MC_PITCHRATE_I 0.0400
+param set-default MC_PITCHRATE_D 0.0010
+param set-default MC_PITCH_P 9.0
+param set-default MC_ROLLRATE_P 0.0800
+param set-default MC_ROLLRATE_I 0.0400
+param set-default MC_ROLLRATE_D 0.0010
+param set-default MC_ROLL_P 9.0
+
+param set-default MPC_XY_VEL_I_ACC 4
+param set-default MPC_XY_VEL_P_ACC 3
+
+param set-default RTL_DESCEND_ALT 10
+param set-default RTL_LAND_DELAY 0
+
+param set-default TRIG_INTERFACE 3
+param set-default TRIG_MODE 4
+param set-default MNT_MODE_IN 0
+param set-default MAV_PROTO_VER 2
+
+param set-default CA_AIRFRAME 0
+param set-default CA_MC_R_COUNT 6
+
+param set-default CA_MC_R0_PX 0.0
+param set-default CA_MC_R0_PY 1.0
+param set-default CA_MC_R0_KM -0.05
+param set-default CA_MC_R1_PX 0.0
+param set-default CA_MC_R1_PY -1.0
+param set-default CA_MC_R1_KM 0.05
+param set-default CA_MC_R2_PX 0.866025
+param set-default CA_MC_R2_PY -0.5
+param set-default CA_MC_R2_KM -0.05
+param set-default CA_MC_R3_PX -0.866025
+param set-default CA_MC_R3_PY 0.5
+param set-default CA_MC_R3_KM 0.05
+param set-default CA_MC_R4_PX 0.866025
+param set-default CA_MC_R4_PY 0.5
+param set-default CA_MC_R4_KM 0.05
+param set-default CA_MC_R5_PX -0.866025
+param set-default CA_MC_R5_PY -0.5
+param set-default CA_MC_R5_KM -0.05
+
+param set-default PWM_MAIN_FUNC1 101
+param set-default PWM_MAIN_FUNC2 102
+param set-default PWM_MAIN_FUNC3 103
+param set-default PWM_MAIN_FUNC4 104
+param set-default PWM_MAIN_FUNC5 105
+param set-default PWM_MAIN_FUNC6 106
+
+set MAV_TYPE 13
+
+set MIXER skip
+set MIXER_AUX none
@@ -0,0 +1,10 @@
+
+mixer append /dev/pwm_output0 etc/mixers/mount_legs.aux.mix
+
+mavlink start -x -u 14558 -r 4000 -f -m onboard -o 14530 -p
+
+# shellcheck disable=SC2154
+mavlink stream -r 10 -s MOUNT_ORIENTATION -u $udp_gcs_port_local
+# shellcheck disable=SC2154
+mavlink stream -r 50 -s ATTITUDE_QUATERNION -u $udp_offboard_port_local
+mavlink stream -r 10 -s MOUNT_ORIENTATION -u $udp_offboard_port_local
@@ -33,53 +33,50 @@

 px4_add_romfs_files(
 	10016_iris
+	10017_iris_ctrlalloc
 	10018_iris_foggy_lidar
-	10019_omnicopter
+	10020_if750a
 	10030_px4vision
-	10040_quadx
-	10041_airplane
-	10042_xvert
 	1010_iris_opt_flow
 	1010_iris_opt_flow.post
 	1011_iris_irlock
 	1012_iris_rplidar
 	1013_iris_vision
 	1013_iris_vision.post
+	1014_solo
 	1015_iris_obs_avoid
 	1015_iris_obs_avoid.post
 	1017_iris_opt_flow_mockup
 	1018_iris_vision_velocity
 	1019_iris_dual_gps
+	1020_uuv_generic
 	1021_uuv_hippocampus
 	1022_uuv_bluerov2_heavy
 	1030_plane
 	1031_plane_cam
 	1032_plane_catapult
+	1033_plane_lidar
 	1033_rascal
 	1034_rascal-electric
 	1035_techpod
 	1036_malolo
 	1037_believer
 	1038_glider
-	1039_advanced_plane
 	1040_standard_vtol
 	1041_tailsitter
 	1042_tiltrotor
 	1043_standard_vtol_drop
-	1044_plane_lidar
+	1043_standard_vtol_drop.post
 	1060_rover
 	1061_r1_rover
 	1062_tf-r1
 	1070_boat
 	3010_quadrotor_x
 	3011_hexarotor_x
-
-	4001_x500
-
 	17001_tf-g1
-	17002_tf-g2
 	2507_cloudship
-
 	6011_typhoon_h480
 	6011_typhoon_h480.post
+	6012_typhoon_h480_ctrlalloc
+	6012_typhoon_h480_ctrlalloc.post
 )
@@ -30,12 +30,3 @@ mavlink start -x -u $udp_onboard_payload_port_local -r 4000 -f -m onboard -o $ud

 # Onboard link to gimbal
 mavlink start -x -u $udp_onboard_gimbal_port_local -r 400000 -m gimbal -o $udp_onboard_gimbal_port_remote
-
-# To display for SIH sitl
-if [ "$PX4_SIMULATOR" = "sihsim" ]; then
-	udp_sihsim_port_local=$((19450+px4_instance))
-	udp_sihsim_port_remote=$((19410+px4_instance))
-	mavlink start -x -u $udp_sihsim_port_local -r 400000 -m custom -o $udp_sihsim_port_remote
-	mavlink stream -r 200 -s HIL_ACTUATOR_CONTROLS -u  $udp_sihsim_port_local
-	mavlink stream -r 25 -s HIL_STATE_QUATERNION -u  $udp_sihsim_port_local
-fi
@@ -0,0 +1,4 @@
+#!/bin/sh
+# shellcheck disable=SC2154
+
+micrortps_client start -t UDP -r $((2019+2*px4_instance)) -s $((2020+2*px4_instance))
@@ -1,143 +1,20 @@
 #!/bin/sh
 # shellcheck disable=SC2154

-# Simulator IMU data provided at 250 Hz
-param set-default IMU_INTEG_RATE 250
-
-if [ "$PX4_SIMULATOR" = "sihsim" ] || [ "$(param show -q SYS_AUTOSTART)" -eq "0" ]; then
-
-	if simulator_sih start; then
-
-		sensor_baro_sim start
-		sensor_gps_sim start
-		sensor_mag_sim start
-
-	else
-		echo "ERROR  [init] simulator_sih failed to start"
-		exit 1
-	fi
-
-elif [ "$PX4_SIMULATOR" = "gz" ]; then
-
-	# source generated gazebo_env.sh for IGN_GAZEBO_RESOURCE_PATH
-	if [ -f gazebo_env.sh ]; then
-		. ./gazebo_env.sh
-	elif [ -f ../gazebo_env.sh ]; then
-		. ../gazebo_env.sh
-	fi
-
-# shellcheck disable=SC2236
-	if [ ! -z $PX4_GZ_VERBOSE ]; then
-		if [ "$PX4_GZ_VERBOSE" -le "4" ] && [ "$PX4_GZ_VERBOSE" -ge "1" ]; then
-			gz_verbose=$PX4_GZ_VERBOSE
-		else
-			gz_verbose=4
-			echo "WARN  [init] PX4_GZ_VERBOSE was passed: $PX4_GZ_VERBOSE, not in range [1,4], defaulting to: $gz_verbose."
-		fi
-		echo "INFO  [init] PX4_GZ_VERBOSE set to $gz_verbose."
-	else
-		gz_verbose=1
-		echo "INFO  [init] PX4_GZ_VERBOSE not explicitly set, defaulting to: $gz_verbose."
-	fi
-
-	gz_world=$( ign topic -l | grep -m 1 -e "/world/.*/clock" | sed 's/\/world\///g; s/\/clock//g' )
-	
-	gz_version_major=$( ign gazebo --versions | sed 's/\..*//g' )
-	gz_version_minor=$( ign gazebo --versions | sed 's/'"${gz_version_major}"\.'//; s/\..*//g' )
-	gz_version_point=$( ign gazebo --versions | sed 's/'"${gz_version_major}"\.'//; s/'"${gz_version_minor}"\.'//')
-
-	if [ "$gz_version_major" -gt "6" ] || { [ "$gz_version_major" -eq "6" ] && [ "$gz_version_minor" -gt "12" ]; } || { [ "$gz_version_major" -eq "6" ] && [ "$gz_version_minor" -eq "12" ] && [ "$gz_version_point" -gt "0" ]; }; then
-		echo "INFO  [init] using latest version of MultiCopterMotor plugin."
-	else
-		echo "WARN  [init] using older version of MultiCopterMotor plugin, please update to latest gazebo > 6.12.0."
-		if [ "$PX4_SIM_MODEL" = "x500" ]; then
-			PX4_SIM_MODEL="x500-Legacy"
-			echo "WARN  [init] setting PX4_SIM_MODEL -> $PX4_SIM_MODEL from x500 till gazebo > 6.12.0"
-		fi
-	fi
-
-	if [ -z $gz_world ]; then
-
-		# starting ign gazebo with ${PX4_GZ_WORLD} world
-		echo "INFO  [init] starting ign gazebo"
-# shellcheck disable=SC2153
-		ign gazebo --verbose=$gz_verbose -r -s "${PX4_GZ_WORLDS}/${PX4_GZ_WORLD}.sdf" &
-
-		if [ -z $HEADLESS ]; then
-			# HEADLESS not set, starting ign gazebo gui
-			ign gazebo -g &
-		fi
-	else
-		echo "INFO  [init] ign gazebo already running world: $gz_world"
-		PX4_GZ_WORLD=$gz_world
-	fi
-
-# shellcheck disable=SC2236
-	if [ ! -z $PX4_GZ_MODEL ] && [ -z $PX4_GZ_MODEL_NAME ]; then
-
-# shellcheck disable=SC2236
-		if [ ! -z $PX4_GZ_MODEL_POSE ]; then
-			# Clean potential input line formatting.
-			model_pose="$( echo ${PX4_GZ_MODEL_POSE} | sed -e 's/^[ \t]*//; s/[ \t]*$//; s/,/ /g; s/  / /g; s/ /,/g' )"
-			echo "INFO  [init] PX4_GZ_MODEL_POSE set, spawning at: ${model_pose}"
-		else
-			echo "WARN  [init] PX4_GZ_MODEL_POSE not set, spawning at origin."
-			model_pose="0,0,0,0,0,0"
-		fi
-		# start gz bridge with pose arg.
-		if gz_bridge start -p "${model_pose}"  -m "${PX4_GZ_MODEL}" -w "${PX4_GZ_WORLD}" -i "${px4_instance}"; then
-			sensor_baro_sim start
-			sensor_gps_sim start
-			sensor_mag_sim start
-		else
-			echo "ERROR  [init] ign gazebo failed to start"
-			exit 1
-		fi
-	elif [ ! -z $PX4_GZ_MODEL_NAME ] && [ -z $PX4_GZ_MODEL ]; then
-		if gz_bridge start -n "${PX4_GZ_MODEL_NAME}" -w "${PX4_GZ_WORLD}"; then
-			sensor_baro_sim start
-			sensor_gps_sim start
-			sensor_mag_sim start
-		else
-			echo "ERROR  [init] ign gazebo failed to start"
-			exit 1
-		fi
-	elif [ ! -z $PX4_SIM_MODEL ] && [ -z $PX4_GZ_MODEL_NAME ] && [ -z $PX4_GZ_MODEL ]; then
-		echo "WARN  [init] PX4_GZ_MODEL_NAME or PX4_GZ_MODEL not set using PX4_SIM_MODEL."
-		if gz_bridge start -m "${PX4_SIM_MODEL}" -w "${PX4_GZ_WORLD}" -i "${px4_instance}"; then
-			sensor_baro_sim start
-			sensor_gps_sim start
-			sensor_mag_sim start
-		else
-			echo "ERROR  [init] ign gazebo failed to start"
-			exit 1
-		fi
-
-	else
-		echo "ERROR  [init] failed to pass only PX4_GZ_MODEL_NAME or PX4_GZ_MODEL"
-		exit 1
-	fi
+simulator_tcp_port=$((4560+px4_instance))

+# Check if PX4_SIM_HOSTNAME environment variable is empty
+# If empty check if PX4_SIM_HOST_ADDR environment variable is empty
+# If both are empty use localhost for simulator
+if [ -z "${PX4_SIM_HOSTNAME}" ]; then
+  if [ -z "${PX4_SIM_HOST_ADDR}" ]; then
+    echo "PX4 SIM HOST: localhost"
+    simulator start -c $simulator_tcp_port
+  else
+    echo "PX4 SIM HOST: $PX4_SIM_HOST_ADDR"
+    simulator start -t $PX4_SIM_HOST_ADDR $simulator_tcp_port
+  fi
 else
-	# otherwise start simulator (mavlink) module
-	simulator_tcp_port=$((4560+px4_instance))
-
-	# Check if PX4_SIM_HOSTNAME environment variable is empty
-	# If empty check if PX4_SIM_HOST_ADDR environment variable is empty
-	# If both are empty use localhost for simulator
-	if [ -z "${PX4_SIM_HOSTNAME}" ]; then
-
-		if [ -z "${PX4_SIM_HOST_ADDR}" ]; then
-			echo "PX4 SIM HOST: localhost"
-			simulator_mavlink start -c $simulator_tcp_port
-		else
-			echo "PX4 SIM HOST: $PX4_SIM_HOST_ADDR"
-			simulator_mavlink start -t $PX4_SIM_HOST_ADDR $simulator_tcp_port
-		fi
-
-	else
-		echo "PX4 SIM HOST: $PX4_SIM_HOSTNAME"
-		simulator_mavlink start -h $PX4_SIM_HOSTNAME $simulator_tcp_port
-	fi
-
+  echo "PX4 SIM HOST: $PX4_SIM_HOSTNAME"
+  simulator start -h $PX4_SIM_HOSTNAME $simulator_tcp_port
 fi
@@ -10,7 +10,7 @@ fi

 if [ ! -f replay_params.txt ]; then
 	echo "Creating $(pwd)/replay_params.txt"
-	ulog_params -i "${replay}" -l ' ' | grep -e '^EKF2' > replay_params.txt
+	ulog_params -i "${replay}" -d ' ' | grep -e '^EKF2' > replay_params.txt
 fi

 publisher_rules_file="orb_publisher.rules"
@@ -21,7 +21,6 @@ ignore_others: false
 EOF

 param set SDLOG_DIRS_MAX 7
-param set SDLOG_PROFILE 3

 # apply all params before ekf starts, as some params cannot be changed after startup
 replay tryapplyparams
@@ -1,9 +1,6 @@
 #!/bin/sh

-# Un comment and use set +e to ignore and set -e to enable 'exit on error control'
-set +e
-# Un comment the line below to help debug scripts by printing a trace of the script commands
-#set -x
+set -e

 # PX4 commands need the 'px4-' prefix in bash.
 # (px4-alias.sh is expected to be in the PATH)
@@ -26,92 +23,70 @@ then
 fi

 # initialize script variables
+set IO_PRESENT                  no
+set MAV_TYPE                    none
+set MIXER                       none
+set MIXER_AUX                   none
+set MIXER_FILE                  none
+set OUTPUT_MODE                 sim
+set EXTRA_MIXER_MODE            none
+set PWM_OUT                     none
+set SDCARD_MIXERS_PATH          etc/mixers
+set USE_IO                      no
 set VEHICLE_TYPE                none
 set LOGGER_ARGS                 ""
 set LOGGER_BUF                  1000

 set RUN_MINIMAL_SHELL           no

-set SYS_AUTOSTART=0
-
-if [ "$PX4_SIM_MODEL" = "shell" ]
-then
+# Use the variable set by sitl_run.sh to choose the model settings.
+if [ "$PX4_SIM_MODEL" = "shell" ]; then
 	set RUN_MINIMAL_SHELL yes
-
-elif [ -n "$PX4_SYS_AUTOSTART" ]
-then
-	echo "env SYS_AUTOSTART: ${PX4_SYS_AUTOSTART}"
-	SYS_AUTOSTART=${PX4_SYS_AUTOSTART}
-
-elif [ "$PX4_SIM_MODEL" = "none" ] || [ -z $PX4_SIM_MODEL ]
-then
-	# no airframe selected
-	SYS_AUTOSTART=0
-
-elif [ -n "$PX4_SIM_MODEL" ]
-then
+else
 	# Find the matching Autostart ID (file name has the form: [0-9]+_${PX4_SIM_MODEL})
 	# TODO: unify with rc.autostart generation
 	# shellcheck disable=SC2012
 	REQUESTED_AUTOSTART=$(ls "${R}etc/init.d-posix/airframes" | sed -n 's/^\([0-9][0-9]*\)_'${PX4_SIM_MODEL}'$/\1/p')
 	if [ -z "$REQUESTED_AUTOSTART" ]; then
-		echo "ERROR [init] Unknown model $PX4_SIM_MODEL (not found by name on ${R}etc/init.d-posix/airframes)"
+		echo "ERROR  [init] Unknown model $PX4_SIM_MODEL (not found by name on ${R}etc/init.d-posix/airframes)"
 		exit 1
 	else
-		SYS_AUTOSTART=$REQUESTED_AUTOSTART
 		echo "INFO  [init] found model autostart file as SYS_AUTOSTART=$REQUESTED_AUTOSTART"
 	fi
 fi

 # Load parameters
-set PARAM_FILE parameters.bson
-set PARAM_BACKUP_FILE parameters_backup.bson
-
+set PARAM_FILE eeprom/parameters_"$REQUESTED_AUTOSTART"
 param select $PARAM_FILE
-if [ -f $PARAM_FILE ]; then

-	if ! param import
+if [ -f $PARAM_FILE ]
+then
+	if param load
 	then
-		echo "ERROR [init] param import failed"
-
-		param dump $PARAM_FILE
-
-		# try to make a backup copy
-		cp $PARAM_FILE param_import_fail.bson
-
-		# try importing from backup file
-		if [ -f $PARAM_BACKUP_FILE ]
-		then
-			echo "[init] importing from parameter backup"
-
-			# dump current backup file contents for comparison
-			param dump $PARAM_BACKUP_FILE
-
-			param import $PARAM_BACKUP_FILE
-
-			# overwrite invalid $PARAM_FILE with backup
-			cp $PARAM_BACKUP_FILE $PARAM_FILE
-		fi
-
-		param status
+		echo "[param] Loaded: $PARAM_FILE"
+	else
+		echo "[param] FAILED loading $PARAM_FILE"
 	fi
-
-elif [ -f $PARAM_BACKUP_FILE ]; then
-	echo "ERROR [init] primary param file $PARAM_FILE unavailable, using backup $PARAM_BACKUP_FILE"
-	param import $PARAM_BACKUP_FILE
+else
+	echo "[param] parameter file not found, creating $PARAM_FILE"
 fi

-param select-backup $PARAM_BACKUP_FILE
-
-
 # exit early when the minimal shell is requested
 [ $RUN_MINIMAL_SHELL = yes ] && exit 0

-if param compare SYS_AUTOSTART $SYS_AUTOSTART
-then
-	set AUTOCNF no

-elif [ "$SYS_AUTOSTART" -eq 0 ]
+# Use environment variable PX4_ESTIMATOR to choose estimator.
+if [ "$PX4_ESTIMATOR" = "q" ]; then
+	param set SYS_MC_EST_GROUP 3
+elif [ "$PX4_ESTIMATOR" = "ekf2" ]; then
+	param set SYS_MC_EST_GROUP 2
+elif [ "$PX4_ESTIMATOR" = "lpe" ]; then
+	param set SYS_MC_EST_GROUP 1
+elif [ "$PX4_ESTIMATOR" = "inav" ]; then
+	param set SYS_MC_EST_GROUP 0
+fi
+
+if param compare SYS_AUTOSTART $REQUESTED_AUTOSTART
 then
 	set AUTOCNF no
 else
@@ -121,9 +96,10 @@ fi

 if param compare SYS_AUTOCONFIG 1
 then
-	# Reset params except Airframe, RC calibration, sensor calibration, flight modes, total flight time, and next flight UUID.
-	param reset_all SYS_AUTOSTART RC* CAL_* COM_FLTMODE* LND_FLIGHT* TC_* COM_FLIGHT*
 	set AUTOCNF yes
+
+	# Wipe out params except RC*, flight modes, total flight time, accel cal, gyro cal, next flight UUID
+	param reset_all SYS_AUTO* RC* COM_FLTMODE* LND_FLIGHT* TC_* CAL_ACC* CAL_GYRO* COM_FLIGHT*
 fi

 # multi-instance setup
@@ -132,7 +108,7 @@ param set MAV_SYS_ID $((px4_instance+1))

 if [ $AUTOCNF = yes ]
 then
-	param set SYS_AUTOSTART $SYS_AUTOSTART
+	param set SYS_AUTOSTART $REQUESTED_AUTOSTART

 	param set CAL_ACC0_ID  1310988 # 1310988: DRV_IMU_DEVTYPE_SIM, BUS: 1, ADDR: 1, TYPE: SIMULATION
 	param set CAL_GYRO0_ID 1310988 # 1310988: DRV_IMU_DEVTYPE_SIM, BUS: 1, ADDR: 1, TYPE: SIMULATION
@@ -169,7 +145,6 @@ param set-default EKF2_MULTI_MAG 2
 param set-default SENS_MAG_MODE 0

 param set-default IMU_GYRO_FFT_EN 1
-param set-default MAV_PROTO_VER 2 # Ensures QGC does not drop the first few packets after a SITL restart due to MAVLINK 1 packets

 param set-default -s MC_AT_EN 1

@@ -181,8 +156,6 @@ param set-default SDLOG_DIRS_MAX 7

 param set-default TRIG_INTERFACE 3

-param set-default SYS_FAILURE_EN 1
-
 # Adapt timeout parameters if simulation runs faster or slower than realtime.
 if [ -n "$PX4_SIM_SPEED_FACTOR" ]; then
 	COM_DL_LOSS_T_LONGER=$(echo "$PX4_SIM_SPEED_FACTOR * 10" | bc)
@@ -217,28 +190,33 @@ do
 			;;
 	esac
 done
-
-if [ -e "$autostart_file" ]
-then
-	. "$autostart_file"
-
-elif [ ! -e "$autostart_file" ] && [ "$SYS_AUTOSTART" -ne "0" ]
-then
+if [ ! -e "$autostart_file" ]; then
 	echo "Error: no autostart file found ($autostart_file)"
 	exit 1
 fi

+. "$autostart_file"
+
+#
+# If autoconfig parameter was set, reset it and save parameters.
+#
+if [ $AUTOCNF = yes ]
+then
+	param set SYS_AUTOCONFIG 0
+fi
+
+# Simulator IMU data provided at 250 Hz
+param set IMU_INTEG_RATE 250
+
 #user defined params for instances can be in PATH
 . px4-rc.params

 dataman start
-
 # only start the simulator if not in replay mode, as both control the lockstep time
 if ! replay tryapplyparams
 then
-	. px4-rc.simulator
+  . px4-rc.simulator
 fi
-
 load_mon start
 battery_simulator start
 tone_alarm start
@@ -246,25 +224,17 @@ rc_update start
 manual_control start
 sensors start
 commander start
-
-if ! pwm_out_sim start -m sim
-then
-	tune_control play error
-fi
-
-#
-# Configure vehicle type specific parameters.
-# Note: rc.vehicle_setup is the entry point for all vehicle type specific setup.
-. ${R}etc/init.d/rc.vehicle_setup
-
 navigator start

-# Try to start the microdds_client with UDP transport if module exists
-microdds_client start -t udp -p 8888
+# Try to start the micrortps_client with UDP transport if module exists
+if px4-micrortps_client status > /dev/null 2>&1
+then
+	. px4-rc.rtps
+fi

 if param greater -s MNT_MODE_IN -1
 then
-	gimbal start
+	vmount start
 fi

 if param greater -s TRIG_MODE 0
@@ -283,11 +253,11 @@ then
 	gyro_calibration start
 fi

-# Payload deliverer module if gripper is enabled
-if param compare -s PD_GRIPPER_EN 1
-then
-	payload_deliverer start
-fi
+# Configure vehicle type specific parameters.
+# Note: rc.vehicle_setup is the entry point for rc.interface,
+#       rc.fw_apps, rc.mc_apps, rc.rover_apps, and rc.vtol_apps.
+#
+. ${R}etc/init.d/rc.vehicle_setup

 #user defined mavlink streams for instances can be in PATH
 . px4-rc.mavlink
@@ -41,7 +41,7 @@ px4_add_romfs_files(
 	rc.boat_defaults
 	rc.fw_apps
 	rc.fw_defaults
-	rc.heli_defaults
+	rc.interface
 	rc.logging
 	rc.mc_apps
 	rc.mc_defaults
@@ -0,0 +1,53 @@
+#!/bin/sh
+#
+# @name HILStar (XPlane)
+#
+# @type Simulation
+# @class Plane
+#
+# @output MAIN1 aileron
+# @output MAIN2 elevator
+# @output MAIN3 rudder
+# @output MAIN4 throttle
+# @output MAIN5 flaps
+# @output MAIN6 gear
+#
+# @maintainer Lorenz Meier <lorenz@px4.io>
+# @board px4_fmu-v2 exclude
+#
+
+. ${R}etc/init.d/rc.fw_defaults
+
+param set-default BAT1_N_CELLS 3
+
+param set-default FW_AIRSPD_MAX 20
+param set-default FW_AIRSPD_MIN 12
+param set-default FW_AIRSPD_TRIM 14
+param set-default FW_R_TC 0.3
+param set-default FW_P_TC 0.3
+param set-default FW_L1_DAMPING 0.74
+param set-default FW_L1_PERIOD 16
+param set-default FW_LND_ANG 15
+param set-default FW_LND_FLALT 5
+param set-default FW_LND_HVIRT 13
+param set-default FW_LND_TLALT 5
+param set-default FW_THR_LND_MAX 0
+param set-default FW_PR_FF 0.35
+param set-default FW_PR_P 0.2
+param set-default FW_RR_FF 0.6
+param set-default FW_RR_P 0.3
+
+param set-default RWTO_TKOFF 1
+
+param set SYS_HITL 1
+
+# disable some checks to allow to fly
+# - with usb
+param set-default CBRK_USB_CHK 197848
+# - without real battery
+param set-default CBRK_SUPPLY_CHK 894281
+# - without safety switch
+param set-default COM_PREARM_MODE 0
+param set-default CBRK_IO_SAFETY 22027
+
+set MIXER AERT
@@ -0,0 +1,36 @@
+#!/bin/sh
+#
+# @name Team Blacksheep Discovery
+#
+# @type Quadrotor Wide
+# @class Copter
+#
+# @output MAIN1 motor 1
+# @output MAIN2 motor 2
+# @output MAIN3 motor 3
+# @output MAIN4 motor 4
+# @output MAIN5 feed-through of RC AUX1 channel
+# @output MAIN6 feed-through of RC AUX2 channel
+#
+# @output AUX1 feed-through of RC AUX1 channel
+# @output AUX2 feed-through of RC AUX2 channel
+# @output AUX3 feed-through of RC AUX3 channel
+# @output AUX4 feed-through of RC FLAPS channel
+#
+# @maintainer Lorenz Meier <lorenz@px4.io>
+#
+# @board px4_fmu-v2 exclude
+# @board bitcraze_crazyflie exclude
+#
+
+. ${R}etc/init.d/rc.mc_defaults
+
+param set-default MC_ROLLRATE_P 0.1
+param set-default MC_ROLLRATE_I 0.05
+param set-default MC_ROLLRATE_D 0.0017
+param set-default MC_PITCHRATE_P 0.14
+param set-default MC_PITCHRATE_I 0.1
+param set-default MC_PITCHRATE_D 0.0025
+param set-default MC_YAWRATE_P 0.28
+
+set MIXER quad_w
@@ -0,0 +1,40 @@
+#!/bin/sh
+#
+# @name 3DR Iris Quadrotor
+#
+# @type Quadrotor Wide
+# @class Copter
+#
+# @output MAIN1 motor 1
+# @output MAIN2 motor 2
+# @output MAIN3 motor 3
+# @output MAIN4 motor 4
+#
+# @output AUX1 feed-through of RC AUX1 channel
+# @output AUX2 feed-through of RC AUX2 channel
+# @output AUX3 feed-through of RC AUX3 channel
+# @output AUX4 feed-through of RC FLAPS channel
+#
+# @maintainer Lorenz Meier <lorenz@px4.io>
+#
+# @board px4_fmu-v2 exclude
+# @board bitcraze_crazyflie exclude
+#
+
+. ${R}etc/init.d/rc.mc_defaults
+
+# TODO tune roll/pitch separately
+param set-default MC_ROLL_P 7
+param set-default MC_ROLLRATE_I 0.05
+param set-default MC_ROLLRATE_D 0.004
+param set-default MC_PITCH_P 7
+param set-default MC_PITCHRATE_I 0.05
+param set-default MC_PITCHRATE_D 0.004
+param set-default MC_YAW_P 2.5
+param set-default MC_YAWRATE_P 0.25
+param set-default MC_YAWRATE_I 0.25
+
+param set-default BAT1_V_DIV 12.27559
+param set-default BAT1_A_PER_V 15.39103
+
+set MIXER quad_w
--- a/Show More
+++ b/Show More
				`@@ -0,0 +1 @@`
				`mixer append /dev/pwm_output0 etc/mixers-sitl/package_drop.aux.mix`