WIP: in tree Dockerfile and github actions push to github registry

.ci/Jenkinsfile-compile

@@ -9,10 +9,11 @@ pipeline {
         script {
           def build_nodes = [:]
           def docker_images = [
-            armhf: "px4io/px4-dev-armhf:2021-09-08",
+            armhf: "px4io/px4-dev-armhf:2021-04-29",
-            arm64: "px4io/px4-dev-aarch64:2021-09-08",
+            arm64: "px4io/px4-dev-aarch64:2021-04-29",
-            base: "px4io/px4-dev-base-bionic:2021-09-08",
+            base: "px4io/px4-dev-base-bionic:2021-04-29",
-            nuttx: "px4io/px4-dev-nuttx-focal:2021-09-08",
+            nuttx: "px4io/px4-dev-nuttx-focal:2021-04-29",
+            snapdragon: "lorenzmeier/px4-dev-snapdragon:2020-04-01"
           ]
 
           def armhf_builds = [
@@ -28,7 +29,7 @@ pipeline {
           ]
 
           def base_builds = [
-            target: ["px4_sitl_default"],
+            target: ["px4_sitl_rtps"],
             image: docker_images.base,
             archive: false
           ]
@@ -38,11 +39,6 @@ pipeline {
                      "airmind_mindpx-v2_default",
                      "ark_can-flow_canbootloader",
                      "ark_can-flow_default",
-                     "ark_can-gps_canbootloader",
-                     "ark_can-gps_default",
-                     "ark_can-rtk-gps_canbootloader",
-                     "ark_can-rtk-gps_default",
-                     "atl_mantis-edu_default",
                      "av_x-v1_default",
                      "bitcraze_crazyflie_default",
                      "bitcraze_crazyflie21_default",
@@ -52,31 +48,18 @@ pipeline {
                      "cuav_x7pro_default",
                      "cubepilot_cubeorange_default",
                      "cubepilot_cubeyellow_default",
-                     "diatone_mamba-f405-mk2_default",
-                     "freefly_can-rtk-gps_canbootloader",
-                     "freefly_can-rtk-gps_default",
                      "holybro_can-gps-v1_canbootloader",
                      "holybro_can-gps-v1_default",
                      "holybro_durandal-v1_default",
                      "holybro_kakutef7_default",
-                     "holybro_kakuteh7_default",
                      "holybro_pix32v5_default",
-                     "matek_gnss-m9n-f4_canbootloader",
-                     "matek_gnss-m9n-f4_default",
-                     "matek_h743-mini_default",
-                     "matek_h743-slim_default",
-                     "matek_h743_default",
                      "modalai_fc-v1_default",
                      "modalai_fc-v1_rtps",
-                     "modalai_fc-v2_default",
                      "mro_ctrl-zero-f7_default",
                      "mro_ctrl-zero-f7-oem_default",
-                     "mro_ctrl-zero-h7-oem_default",
-                     "mro_ctrl-zero-h7-oem_rtps",
                      "mro_ctrl-zero-h7_default",
-                     "mro_ctrl-zero-h7_rtps",
+                     "mro_ctrl-zero-h7-oem_default",
                      "mro_pixracerpro_default",
-                     "mro_pixracerpro_rtps",
                      "mro_x21-777_default",
                      "mro_x21_default",
                      "nxp_fmuk66-e_default",
@@ -86,31 +69,33 @@ pipeline {
                      "nxp_fmuk66-v3_rtps",
                      "nxp_fmuk66-v3_socketcan",
                      "nxp_fmurt1062-v1_default",
-                     "nxp_ucans32k146_canbootloader",
                      "nxp_ucans32k146_default",
+                     "nxp_ucans32k146_canbootloader",
                      "omnibus_f4sd_default",
                      "px4_fmu-v2_default",
                      "px4_fmu-v2_fixedwing",
-                     "px4_fmu-v2_lto",
                      "px4_fmu-v2_multicopter",
                      "px4_fmu-v2_rover",
                      "px4_fmu-v3_default",
+                     "px4_fmu-v4_cannode",
                      "px4_fmu-v4_default",
                      "px4_fmu-v4pro_default",
-                     "px4_fmu-v5_cyphal",
+                     "px4_fmu-v5_ctrlalloc",
                      "px4_fmu-v5_debug",
                      "px4_fmu-v5_default",
-                     "px4_fmu-v5_lto",
+                     "px4_fmu-v5_fixedwing",
+                     "px4_fmu-v5_multicopter",
+                     "px4_fmu-v5_optimized",
+                     "px4_fmu-v5_rover",
                      "px4_fmu-v5_rtps",
                      "px4_fmu-v5_stackcheck",
                      "px4_fmu-v5_uavcanv0periph",
+                     "px4_fmu-v5_uavcanv1",
+                     "px4_fmu-v5x_base_phy_DP83848C",
                      "px4_fmu-v5x_default",
-                     "px4_fmu-v6c_default",
                      "px4_fmu-v6u_default",
                      "px4_fmu-v6x_default",
                      "px4_io-v2_default",
-                     "raspberrypi_pico_default",
-                     "sky-drones_smartap-airlink_default",
                      "spracing_h7extreme_default",
                      "uvify_core_default"
             ],
@@ -118,8 +103,14 @@ pipeline {
             archive: true
           ]
 
+          def snapdragon_builds = [
+            target: ["atlflight_eagle_qurt", "atlflight_eagle_default"],
+            image: docker_images.snapdragon,
+            archive: false
+          ]
+
           def docker_builds = [
-            armhf_builds, base_builds, nuttx_builds_archive
+            armhf_builds, base_builds, nuttx_builds_archive//, snapdragon_builds
           ]
 
           for (def build_type = 0; build_type < docker_builds.size(); build_type++) {
@@ -139,7 +130,7 @@ pipeline {
     // TODO: actually upload artifacts to S3
     // stage('S3 Upload') {
     //   agent {
-    //     docker { image 'px4io/px4-dev-base-focal:2021-09-08' }
+    //     docker { image 'ghcr.io/px4/px4-dev:2021-05-06' }
     //   }
     //   options {
     //         skipDefaultCheckout()
@@ -164,14 +155,18 @@ pipeline {
   }
   options {
     buildDiscarder(logRotator(numToKeepStr: '5', artifactDaysToKeepStr: '14'))
-    timeout(time: 90, unit: 'MINUTES')
+    timeout(time: 60, unit: 'MINUTES')
   }
 }
 
 def createBuildNode(Boolean archive, String docker_image, String target) {
   return {
 
+    // TODO: fix the snapdragon image
     bypass_entrypoint = ''
+    if (docker_image == 'lorenzmeier/px4-dev-snapdragon:2020-04-01') {
+      bypass_entrypoint = ' --entrypoint=""'
+    }
 
     node {
       docker.withRegistry('https://registry.hub.docker.com', 'docker_hub_dagar') {
@@ -180,7 +175,7 @@ def createBuildNode(Boolean archive, String docker_image, String target) {
             try {
               sh('export')
               checkout(scm)
-              sh('make distclean; git clean -ff -x -d .')
+              sh('make distclean')
               sh('git fetch --tags')
               sh('ccache -s')
               sh('make ' + target)
@@ -197,7 +192,7 @@ def createBuildNode(Boolean archive, String docker_image, String target) {
               throw (exc)
             }
             finally {
-              sh('make distclean; git clean -ff -x -d .')
+              sh('make distclean')
             }
           }
         }

.clang-tidy

@@ -1,17 +1,11 @@
 ---
 Checks:          '*,
-                  -*-avoid-c-arrays,
-                  -*-uppercase-literal-suffix,
-                  -*-magic-numbers,
-                  -altera-id-dependent-backward-branch,
-                  -altera-unroll-loops,
                   -android*,
                   -bugprone-integer-division,
                   -cert-dcl50-cpp,
                   -cert-env33-c,
                   -cert-err34-c,
                   -cert-err58-cpp,
-                  -cert-flp30-c,
                   -cert-msc30-c,
                   -cert-msc50-cpp,
                   -clang-analyzer-core.CallAndMessage,
@@ -24,7 +18,6 @@ Checks:          '*,
                   -clang-analyzer-deadcode.DeadStores,
                   -clang-analyzer-optin.cplusplus.VirtualCall,
                   -clang-analyzer-optin.performance.Padding,
-                  -clang-analyzer-security.FloatLoopCounter,
                   -clang-analyzer-security.insecureAPI.strcpy,
                   -clang-analyzer-unix.API,
                   -clang-analyzer-unix.cstring.BadSizeArg,
@@ -44,7 +37,8 @@ Checks:          '*,
                   -cppcoreguidelines-pro-type-union-access,
                   -cppcoreguidelines-pro-type-vararg,
                   -cppcoreguidelines-special-member-functions,
-                  -fuchsia-*,
+                  -fuchsia-default-arguments,
+                  -fuchsia-overloaded-operator,
                   -google-build-using-namespace,
                   -google-explicit-constructor,
                   -google-global-names-in-headers,
@@ -68,7 +62,6 @@ Checks:          '*,
                   -hicpp-use-equals-delete,
                   -hicpp-use-override,
                   -hicpp-vararg,
-                  -llvmlibc-*,
                   -llvm-header-guard,
                   -llvm-include-order,
                   -llvm-namespace-comment,
@@ -81,7 +74,6 @@ Checks:          '*,
                   -modernize-deprecated-headers,
                   -modernize-loop-convert,
                   -modernize-pass-by-value,
-                  -modernize-raw-string-literal,
                   -modernize-return-braced-init-list,
                   -modernize-use-auto,
                   -modernize-use-bool-literals,
@@ -89,9 +81,7 @@ Checks:          '*,
                   -modernize-use-equals-default,
                   -modernize-use-equals-delete,
                   -modernize-use-override,
-                  -modernize-use-trailing-return-type,
                   -modernize-use-using,
-                  -modernize-use-trailing-return-type,
                   -performance-inefficient-string-concatenation,
                   -readability-avoid-const-params-in-decls,
                   -readability-container-size-empty,

.clusterfuzzlite/Dockerfile

@@ -1,7 +0,0 @@
-FROM gcr.io/oss-fuzz-base/base-builder:v1
-COPY . $SRC/PX4-Autopilot
-RUN apt-get install -y libjpeg8-dev zlib1g-dev
-RUN pip3 install --upgrade pip
-RUN python3 -m pip install -r $SRC/PX4-Autopilot/Tools/setup/requirements.txt
-WORKDIR $SRC/PX4-Autopilot
-COPY ./.clusterfuzzlite/build.sh $SRC/

.clusterfuzzlite/build.sh

@@ -1,4 +0,0 @@
-#!/usr/bin/env bash -eu
-
-PX4_FUZZ=1 make px4_sitl
-cp build/px4_sitl_default/bin/px4 $OUT/px4

.clusterfuzzlite/project.yaml

@@ -1 +0,0 @@
-language: c++

.devcontainer/devcontainer.json

@@ -2,7 +2,7 @@
 // https://github.com/microsoft/vscode-dev-containers/tree/v0.134.0/containers/cpp
 {
 	"name": "px4-dev-nuttx",
-	"image": "px4io/px4-dev-nuttx-focal:2021-09-08",
+	"image": "px4io/px4-dev-nuttx-focal:2021-04-29",
 
 	"runArgs": [ "--cap-add=SYS_PTRACE", "--security-opt", "seccomp=unconfined" ],
 

.github/ISSUE_TEMPLATE/1_Bug_report.md

@@ -1,34 +1,32 @@
 ---
-name: 🐛 Bug report
+name: Bug report
 about: Create a report to help us improve
-labels: bug-report
 
 ---
 
-## Describe the bug
+**Describe the bug**
 A clear and concise description of the bug.
 
-## To Reproduce
+**To Reproduce**
 Steps to reproduce the behavior:
 1. Drone switched on '...'
 2. Uploaded mission '....' (attach QGC mission file)
 3. Took off '....'
 4. See error
 
-## Expected behavior
+**Expected behavior**
 A clear and concise description of what you expected to happen.
 
-## Log Files and Screenshots
+**Log Files and Screenshots**
 *Always* provide a link to the flight log file:
 - Download the flight log file from the vehicle ([tutorial](https://docs.px4.io/master/en/getting_started/flight_reporting.html)).
-- Upload the log to the [PX4 Flight Review](http://logs.px4.io/)
+- Share the link to a log showing the problem on [PX4 Flight Review](http://logs.px4.io/).
-- Share the link to the log (Copy and paste the URL of the log)
 
 Add screenshots to help explain your problem.
 
-## Drone (please complete the following information):
+**Drone (please complete the following information):**
 - Describe the type of drone.
 - Photo of the IMU / autopilot setup if possible.
 
-## Additional context
+**Additional context**
 Add any other context about the problem here.

.github/ISSUE_TEMPLATE/2_Feature_request.md

@@ -1,20 +1,19 @@
 ---
 name: 🚀 Feature Request
 about: Suggest an idea for this project
-labels: feature-request
 
 ---
 
-For general questions please use [PX4 Discuss](http://discuss.px4.io/) or Slack (you can find an invite link on this project README).
+For general questions please use [PX4 Discuss](http://discuss.px4.io/) or [Slack](http://slack.px4.io/).
 
-## Describe problem solved by the proposed feature
+**Describe problem solved by the proposed feature**
 A clear and concise description of the problem, if any, this feature will solve. E.g. I'm always frustrated when ...
 
-## Describe your preferred solution
+**Describe your preferred solution**
 A clear and concise description of what you want to happen.
 
-## Describe possible alternatives
+**Describe possible alternatives**
 A clear and concise description of alternative solutions or features you've considered.
 
-## Additional context
+**Additional context**
 Add any other context or screenshots for the feature request here.

.github/ISSUE_TEMPLATE/3_Support_question.md

@@ -1,13 +1,10 @@
 ---
 name: ⛔ Support Question
-about: See http://discuss.px4.io/ for questions about using PX4.
+about: See [PX4 Discuss](http://discuss.px4.io/) for questions about using PX4.
 
 ---
 
-## Attention! Please read the note below
+We use GitHub issues only to discuss PX4 bugs and new features. For
-
+questions about using PX4 or related components, please use [PX4 Discuss](http://discuss.px4.io/).
-We use GitHub issues only to discuss PX4 bugs and new features.
-
-**For questions about using PX4 or related components, please use [PX4 Discuss](http://discuss.px4.io/).**
 
 Thanks!

.github/ISSUE_TEMPLATE/4_Documentation_issue.md

@@ -1,11 +1,9 @@
 ---
 name: ⛔ Documentation Issue
-about: See https://github.com/PX4/px4_user_guide for documentation issues
+about: See https://github.com/PX4/Devguide for documentation issues
 
 ---
 
-## Attention! Please read the note below
+PX4 has dedicated repositories for developer documentation (https://github.com/PX4/Devguide) and user documentation (https://github.com/PX4/px4_user_guide).
-
-**Please submit the documentation issue to the [User Guide](https://github.com/PX4/px4_user_guide) repository.**
 
 Thanks!

.github/PULL_REQUEST_TEMPLATE.md

@@ -1,14 +0,0 @@
-**How this PR solves the problem**
-Depending on how complex the PR is, something between a line and a few paragraphs with logs and videos.
-
-**JIRA ID in title, and link here**
-Add a link and the title of the JIRA for context
-
-**Upstream/develop PR that this was backported from**
-If applicable, link to PR and/or commit
-
-**Critical bug that needs backporting?**
-Yes/No, link to backport PR when applicable
-
-**Additional context**
-Add any other related context or media.

.github/slack.svg

@@ -1,24 +0,0 @@
-<svg xmlns="http://www.w3.org/2000/svg" xmlns:xlink="http://www.w3.org/1999/xlink" width="90" height="20">
-  <linearGradient id="smooth" x2="0" y2="100%">
-    <stop offset="0" stop-color="#bbb" stop-opacity=".1"/>
-    <stop offset="1" stop-opacity=".1"/>
-  </linearGradient>
-
-  <mask id="round">
-    <rect width="90" height="20" rx="3" fill="#fff"/>
-  </mask>
-
-  <g mask="url(#round)">
-    <rect width="42" height="20" fill="#555"/>
-    <rect x="42" width="48" height="20" fill="#E01563"/>
-    <rect width="90" height="20" fill="url(#smooth)"/>
-  </g>
-
-  <g fill="#fff" text-anchor="middle" font-family="DejaVu Sans,Verdana,Geneva,sans-serif" font-size="11">
-    <text x="22" y="15" fill="#010101" fill-opacity=".3">slack</text>
-    <text x="22" y="14">slack</text>
-    <text x="65" y="15" fill="#010101" fill-opacity=".3">Join us!</text>
-    <text x="65" y="14">Join us!</text>
-  </g>
-</svg>
-

.github/workflows/checks.yml

@@ -0,0 +1,71 @@
+name: Checks
+
+on:
+  push:
+    branches:
+    - 'master'
+  pull_request:
+    branches:
+    - '*'
+
+jobs:
+  build:
+    runs-on: ubuntu-latest
+    strategy:
+      fail-fast: false
+      matrix:
+        check: [
+          "check_format",
+          "tests",
+          "tests_coverage",
+          "px4_fmu-v2_default stack_check",
+          "validate_module_configs",
+          "shellcheck_all",
+          "NO_NINJA_BUILD=1 px4_fmu-v5_default",
+          "NO_NINJA_BUILD=1 px4_sitl_default",
+          "airframe_metadata",
+          "module_documentation",
+          "parameters_metadata",
+        ]
+    container:
+      image: ghcr.io/px4/px4-dev:2021-05-06
+      options: --privileged --ulimit core=-1 --security-opt seccomp=unconfined
+    steps:
+    - uses: actions/checkout@v1
+      with:
+        token: ${{ secrets.ACCESS_TOKEN }}
+
+    - name: Prepare ccache timestamp
+      id: ccache_cache_timestamp
+      shell: cmake -P {0}
+      run: |
+        string(TIMESTAMP current_date "%Y-%m-%d-%H;%M;%S" UTC)
+        message("::set-output name=timestamp::${current_date}")
+    - name: ccache cache files
+      uses: actions/cache@v2
+      with:
+        path: ~/.ccache
+        key: tests_${{matrix.ubuntu_release}}-ccache-${{steps.ccache_cache_timestamp.outputs.timestamp}}
+        restore-keys: tests_${{matrix.ubuntu_release}}-ccache-
+    - name: setup ccache
+      run: |
+          mkdir -p ~/.ccache
+          echo "base_dir = ${GITHUB_WORKSPACE}" > ~/.ccache/ccache.conf
+          echo "compression = true" >> ~/.ccache/ccache.conf
+          echo "compression_level = 5" >> ~/.ccache/ccache.conf
+          echo "max_size = 100M" >> ~/.ccache/ccache.conf
+          ccache -s
+          ccache -z
+    - name: check environment
+      run: |
+          export
+          ulimit -a
+    - name: ${{matrix.check}}
+      run: make ${{matrix.check}}
+    - name: upload coverage
+      if: contains(matrix.check, 'coverage')
+      uses: codecov/codecov-action@v1
+      with:
+        token: ${{ secrets.CODECOV_TOKEN }}
+        flags: unittests
+        file: coverage/lcov.info

.github/workflows/clang-tidy.yml

@@ -0,0 +1,46 @@
+name: Clang Tidy
+
+on:
+  push:
+    branches:
+    - 'master'
+  pull_request:
+    branches:
+    - '*'
+
+jobs:
+  build:
+    runs-on: ubuntu-latest
+    container: px4io/px4-dev-clang:2021-04-29
+    steps:
+    - uses: actions/checkout@v1
+      with:
+        token: ${{secrets.ACCESS_TOKEN}}
+
+    - name: Prepare ccache timestamp
+      id: ccache_cache_timestamp
+      shell: cmake -P {0}
+      run: |
+        string(TIMESTAMP current_date "%Y-%m-%d-%H;%M;%S" UTC)
+        message("::set-output name=timestamp::${current_date}")
+    - name: ccache cache files
+      uses: actions/cache@v2
+      with:
+        path: ~/.ccache
+        key: clang-tidy-ccache-${{steps.ccache_cache_timestamp.outputs.timestamp}}
+        restore-keys: clang-tidy-ccache-
+    - name: setup ccache
+      run: |
+          mkdir -p ~/.ccache
+          echo "base_dir = ${GITHUB_WORKSPACE}" > ~/.ccache/ccache.conf
+          echo "compression = true" >> ~/.ccache/ccache.conf
+          echo "compression_level = 5" >> ~/.ccache/ccache.conf
+          echo "max_size = 100M" >> ~/.ccache/ccache.conf
+          ccache -s
+          ccache -z
+
+    - name: make clang-tidy-quiet
+      run: |
+        ccache -z
+        make clang-tidy-quiet
+        ccache -s

.github/workflows/compile_linux.yml

@@ -0,0 +1,53 @@
+name: Linux Targets
+
+on:
+  push:
+    branches:
+    - 'master'
+  pull_request:
+    branches:
+    - '*'
+
+jobs:
+  build:
+    runs-on: ubuntu-latest
+    container: px4io/px4-dev-armhf:2021-04-29
+    strategy:
+      matrix:
+        config: [
+          beaglebone_blue_default,
+          emlid_navio2_default,
+          px4_raspberrypi_default,
+          scumaker_pilotpi_default,
+          ]
+    steps:
+    - uses: actions/checkout@v1
+      with:
+        token: ${{secrets.ACCESS_TOKEN}}
+
+    - name: Prepare ccache timestamp
+      id: ccache_cache_timestamp
+      shell: cmake -P {0}
+      run: |
+        string(TIMESTAMP current_date "%Y-%m-%d-%H;%M;%S" UTC)
+        message("::set-output name=timestamp::${current_date}")
+    - name: ccache cache files
+      uses: actions/cache@v2
+      with:
+        path: ~/.ccache
+        key: ${{matrix.config}}-ccache-${{steps.ccache_cache_timestamp.outputs.timestamp}}
+        restore-keys: ${{matrix.config}}-ccache-
+    - name: setup ccache
+      run: |
+          mkdir -p ~/.ccache
+          echo "base_dir = ${GITHUB_WORKSPACE}" > ~/.ccache/ccache.conf
+          echo "compression = true" >> ~/.ccache/ccache.conf
+          echo "compression_level = 5" >> ~/.ccache/ccache.conf
+          echo "max_size = 100M" >> ~/.ccache/ccache.conf
+          ccache -s
+          ccache -z
+
+    - name: make ${{matrix.config}}
+      run: make ${{matrix.config}}
+    - name: ccache post-run
+      run: ccache -s

.github/workflows/compile_linux_arm64.yml

@@ -0,0 +1,50 @@
+name: Linux ARM64 Targets
+
+on:
+  push:
+    branches:
+    - 'master'
+  pull_request:
+    branches:
+    - '*'
+
+jobs:
+  build:
+    runs-on: ubuntu-latest
+    container: px4io/px4-dev-aarch64:2021-04-29
+    strategy:
+      matrix:
+        config: [
+          scumaker_pilotpi_arm64,
+          ]
+    steps:
+    - uses: actions/checkout@v1
+      with:
+        token: ${{secrets.ACCESS_TOKEN}}
+
+    - name: Prepare ccache timestamp
+      id: ccache_cache_timestamp
+      shell: cmake -P {0}
+      run: |
+        string(TIMESTAMP current_date "%Y-%m-%d-%H;%M;%S" UTC)
+        message("::set-output name=timestamp::${current_date}")
+    - name: ccache cache files
+      uses: actions/cache@v2
+      with:
+        path: ~/.ccache
+        key: ${{matrix.config}}-ccache-${{steps.ccache_cache_timestamp.outputs.timestamp}}
+        restore-keys: ${{matrix.config}}-ccache-
+    - name: setup ccache
+      run: |
+          mkdir -p ~/.ccache
+          echo "base_dir = ${GITHUB_WORKSPACE}" > ~/.ccache/ccache.conf
+          echo "compression = true" >> ~/.ccache/ccache.conf
+          echo "compression_level = 5" >> ~/.ccache/ccache.conf
+          echo "max_size = 100M" >> ~/.ccache/ccache.conf
+          ccache -s
+          ccache -z
+
+    - name: make ${{matrix.config}}
+      run: make ${{matrix.config}}
+    - name: ccache post-run
+      run: ccache -s

.github/workflows/compile_macos.yml

@@ -0,0 +1,55 @@
+name: MacOS build
+
+on:
+  push:
+    branches:
+    - 'master'
+  pull_request:
+    branches:
+    - '*'
+
+jobs:
+  build:
+    runs-on: macos-10.15
+    strategy:
+      matrix:
+        config: [
+          px4_fmu-v5_default,
+          px4_sitl
+          #tests, # includes px4_sitl
+          ]
+    steps:
+    - uses: actions/checkout@v1
+      with:
+        token: ${{secrets.ACCESS_TOKEN}}
+
+    - name: setup
+      run: ./Tools/setup/macos.sh; ./Tools/setup/macos.sh
+
+    - name: Prepare ccache timestamp
+      id: ccache_cache_timestamp
+      shell: cmake -P {0}
+      run: |
+        string(TIMESTAMP current_date "%Y-%m-%d-%H;%M;%S" UTC)
+        message("::set-output name=timestamp::${current_date}")
+    - name: ccache cache files
+      uses: actions/cache@v2
+      with:
+        path: ~/.ccache
+        key: macos_${{matrix.config}}-ccache-${{steps.ccache_cache_timestamp.outputs.timestamp}}
+        restore-keys: macos_${{matrix.config}}-ccache-
+    - name: setup ccache
+      run: |
+          mkdir -p ~/.ccache
+          echo "base_dir = ${GITHUB_WORKSPACE}" > ~/.ccache/ccache.conf
+          echo "compression = true" >> ~/.ccache/ccache.conf
+          echo "compression_level = 5" >> ~/.ccache/ccache.conf
+          echo "max_size = 100M" >> ~/.ccache/ccache.conf
+          ccache -s
+          ccache -z
+
+    - name: make ${{matrix.config}}
+      run: |
+          ccache -z
+          make ${{matrix.config}}
+          ccache -s

.github/workflows/compile_nuttx.yml

@@ -0,0 +1,138 @@
+name: Nuttx Targets
+
+on:
+  push:
+    branches:
+    - 'master'
+    - 'github-actions'
+  pull_request:
+    branches:
+    - '*'
+
+jobs:
+  build:
+    runs-on: ubuntu-latest
+    container: ghcr.io/px4/px4-dev:2021-05-06
+    strategy:
+      matrix:
+        config: [
+          airmind_mindpx-v2_default,
+          ark_can-flow_canbootloader,
+          ark_can-flow_debug,
+          ark_can-flow_default,
+          av_x-v1_default,
+          bitcraze_crazyflie21_default,
+          bitcraze_crazyflie_default,
+          cuav_can-gps-v1_canbootloader,
+          cuav_can-gps-v1_debug,
+          cuav_can-gps-v1_default,
+          cuav_nora_default,
+          cuav_x7pro_default,
+          cubepilot_cubeorange_default,
+          cubepilot_cubeorange_test,
+          cubepilot_cubeyellow_default,
+          cubepilot_cubeyellow_test,
+          cubepilot_io-v2_default,
+          holybro_can-gps-v1_canbootloader,
+          holybro_can-gps-v1_debug,
+          holybro_can-gps-v1_default,
+          holybro_durandal-v1_default,
+          holybro_kakutef7_default,
+          holybro_pix32v5_default,
+          modalai_fc-v1_default,
+          modalai_fc-v1_rtps,
+          mro_ctrl-zero-f7-oem_default,
+          mro_ctrl-zero-f7_default,
+          mro_ctrl-zero-h7-oem_default,
+          mro_ctrl-zero-h7_default,
+          mro_pixracerpro_default,
+          mro_x21-777_default,
+          mro_x21_default,
+          nxp_fmuk66-e_default,
+          nxp_fmuk66-e_rtps,
+          nxp_fmuk66-e_socketcan,
+          nxp_fmuk66-v3_default,
+          nxp_fmuk66-v3_rtps,
+          nxp_fmuk66-v3_socketcan,
+          nxp_fmurt1062-v1_default,
+          nxp_ucans32k146_canbootloader,
+          nxp_ucans32k146_default,
+          omnibus_f4sd_default,
+          px4_fmu-v2_default,
+          px4_fmu-v2_fixedwing,
+          px4_fmu-v2_multicopter,
+          px4_fmu-v2_rover,
+          px4_fmu-v3_default,
+          px4_fmu-v4_cannode,
+          px4_fmu-v4_default,
+          px4_fmu-v4pro_default,
+          px4_fmu-v5_ctrlalloc,
+          px4_fmu-v5_debug,
+          px4_fmu-v5_default,
+          px4_fmu-v5_fixedwing,
+          px4_fmu-v5_multicopter,
+          px4_fmu-v5_optimized,
+          px4_fmu-v5_rover,
+          px4_fmu-v5_rtps,
+          px4_fmu-v5_stackcheck,
+          px4_fmu-v5_uavcanv0periph,
+          px4_fmu-v5_uavcanv1,
+          px4_fmu-v5x_base_phy_DP83848C,
+          px4_fmu-v5x_default,
+          px4_fmu-v6u_default,
+          px4_fmu-v6x_default,
+          px4_io-v2_default,
+          spracing_h7extreme_default,
+          uvify_core_default
+          ]
+    steps:
+    - uses: actions/checkout@v1
+      with:
+        token: ${{secrets.ACCESS_TOKEN}}
+
+    - name: Prepare ccache timestamp
+      id: ccache_cache_timestamp
+      shell: cmake -P {0}
+      run: |
+        string(TIMESTAMP current_date "%Y-%m-%d-%H;%M;%S" UTC)
+        message("::set-output name=timestamp::${current_date}")
+    - name: ccache cache files
+      uses: actions/cache@v2
+      with:
+        path: ~/.ccache
+        key: ${{matrix.config}}-ccache-${{steps.ccache_cache_timestamp.outputs.timestamp}}
+        restore-keys: ${{matrix.config}}-ccache-
+    - name: setup ccache
+      run: |
+          mkdir -p ~/.ccache
+          echo "base_dir = ${GITHUB_WORKSPACE}" > ~/.ccache/ccache.conf
+          echo "compression = true" >> ~/.ccache/ccache.conf
+          echo "compression_level = 5" >> ~/.ccache/ccache.conf
+          echo "max_size = 100M" >> ~/.ccache/ccache.conf
+          ccache -s
+          ccache -z
+
+    - name: make ${{matrix.config}}
+      run: make ${{matrix.config}}
+    - name: make ${{matrix.config}} bloaty_compileunits
+      run: make ${{matrix.config}} bloaty_compileunits || true
+    - name: make ${{matrix.config}} bloaty_inlines
+      run: make ${{matrix.config}} bloaty_inlines || true
+    - name: make ${{matrix.config}} bloaty_segments
+      run: make ${{matrix.config}} bloaty_segments || true
+    - name: make ${{matrix.config}} bloaty_symbols
+      run: make ${{matrix.config}} bloaty_symbols || true
+    - name: make ${{matrix.config}} bloaty_templates
+      run: make ${{matrix.config}} bloaty_templates || true
+    - name: make ${{matrix.config}} bloaty_ram
+      run: make ${{matrix.config}} bloaty_ram || true
+    - name: make ${{matrix.config}} bloaty_compare_master
+      run: make ${{matrix.config}} bloaty_compare_master || true
+    - name: ccache post-run
+      run: ccache -s
+
+    - name: Upload px4 package
+      uses: actions/upload-artifact@v1
+      with:
+        name: px4_package_${{matrix.config}}
+        path: build/${{matrix.config}}/${{matrix.config}}.px4

.github/workflows/compile_nuttx_cannode.yml

@@ -0,0 +1,61 @@
+name: NuttX UAVCAN firmware
+
+on:
+  push:
+    branches:
+    - 'master'
+  pull_request:
+    branches:
+    - '*'
+
+jobs:
+  build:
+    runs-on: ubuntu-latest
+    container: ghcr.io/px4/px4-dev:2021-05-06
+    strategy:
+      matrix:
+        config: [
+          ark_can-flow_default,
+          cuav_can-gps-v1_default,
+          holybro_can-gps-v1_default,
+          #nxp_ucans32k146_default,
+          px4_fmu-v4_cannode
+          ]
+    steps:
+    - uses: actions/checkout@v1
+      with:
+        token: ${{secrets.ACCESS_TOKEN}}
+
+    - name: Prepare ccache timestamp
+      id: ccache_cache_timestamp
+      shell: cmake -P {0}
+      run: |
+        string(TIMESTAMP current_date "%Y-%m-%d-%H;%M;%S" UTC)
+        message("::set-output name=timestamp::${current_date}")
+    - name: ccache cache files
+      uses: actions/cache@v2
+      with:
+        path: ~/.ccache
+        key: ${{matrix.config}}-ccache-${{steps.ccache_cache_timestamp.outputs.timestamp}}
+        restore-keys: ${{matrix.config}}-ccache-
+    - name: setup ccache
+      run: |
+          mkdir -p ~/.ccache
+          echo "base_dir = ${GITHUB_WORKSPACE}" > ~/.ccache/ccache.conf
+          echo "compression = true" >> ~/.ccache/ccache.conf
+          echo "compression_level = 5" >> ~/.ccache/ccache.conf
+          echo "max_size = 100M" >> ~/.ccache/ccache.conf
+          ccache -s
+          ccache -z
+
+    - name: make ${{matrix.config}}
+      run: make ${{matrix.config}}
+
+    - name: ccache post-run
+      run: ccache -s
+
+    - name: Upload px4 package
+      uses: actions/upload-artifact@v2
+      with:
+        name: px4_cannode_${{matrix.config}}
+        path: build/${{matrix.config}}/*.uavcan.bin

.github/workflows/container.yml

@@ -0,0 +1,31 @@
+name: Build and publish Docker image
+
+on:
+  push:
+    branches:
+    - 'master'
+    - 'github-actions'
+
+jobs:
+  docker:
+    runs-on: ubuntu-latest
+    steps:
+      - name: Login to GitHub Container Registry
+        uses: docker/login-action@v1
+        with:
+          registry: ghcr.io
+          username: ${{ github.repository_owner }}
+          password: ${{ secrets.GITHUB_TOKEN }}
+
+      - name: Build and push
+        uses: docker/build-push-action@v2
+        with:
+          context: .
+          platforms: linux/amd64
+          push: true
+          tags: |
+            px4/px4-dev:latest
+            ghcr.io/px4/px4-dev:latest
+
+      - name: Image digest
+        run: echo ${{ steps.docker_build.outputs.digest }}

.github/workflows/deploy_all.yml

@@ -0,0 +1,77 @@
+name: Deploy metadata for all targets
+
+on:
+  push:
+    branches:
+    - 'master'
+    - 'release/*'
+    - 'pr-metadata-test'
+
+jobs:
+  enumerate_targets:
+    runs-on: ubuntu-latest
+    outputs:
+      matrix: ${{ steps.set-matrix.outputs.matrix }}
+    steps:
+    - uses: actions/checkout@v1
+      with:
+        token: ${{secrets.ACCESS_TOKEN}}
+    - id: set-matrix
+      run: echo "::set-output name=matrix::$(./Tools/generate_board_targets_json.py)"
+  build:
+    runs-on: ubuntu-latest
+    needs: enumerate_targets
+    strategy:
+      matrix: ${{fromJson(needs.enumerate_targets.outputs.matrix)}}
+    container: px4io/px4-dev-${{ matrix.container }}:2021-04-29
+    steps:
+    - uses: actions/checkout@v1
+      with:
+        token: ${{secrets.ACCESS_TOKEN}}
+
+    - name: Prepare ccache timestamp
+      id: ccache_cache_timestamp
+      shell: cmake -P {0}
+      run: |
+        string(TIMESTAMP current_date "%Y-%m-%d-%H;%M;%S" UTC)
+        message("::set-output name=timestamp::${current_date}")
+    - name: ccache cache files
+      uses: actions/cache@v2
+      with:
+        path: ~/.ccache
+        key: ${{matrix.target}}-ccache-${{steps.ccache_cache_timestamp.outputs.timestamp}}
+        restore-keys: ${{matrix.target}}-ccache-
+    - name: setup ccache
+      run: |
+          mkdir -p ~/.ccache
+          echo "base_dir = ${GITHUB_WORKSPACE}" > ~/.ccache/ccache.conf
+          echo "compression = true" >> ~/.ccache/ccache.conf
+          echo "compression_level = 5" >> ~/.ccache/ccache.conf
+          echo "max_size = 100M" >> ~/.ccache/ccache.conf
+          ccache -s
+          ccache -z
+
+    - name: make ${{matrix.target}}
+      run: make ${{matrix.target}}
+    - name: ccache post-run
+      run: ccache -s
+
+    - name: parameter metadata
+      run: |
+        make ${{matrix.target}} ver_gen
+        ./src/lib/version/get_git_tag_or_branch_version.sh build/${{ matrix.target }} >> $GITHUB_ENV
+        cd build/${{ matrix.target }}
+        mkdir _metadata || true
+        cp parameters.* _metadata
+
+    - uses: jakejarvis/s3-sync-action@master
+      with:
+        args: --acl public-read
+      env:
+        AWS_S3_BUCKET: 'px4-travis'
+        AWS_ACCESS_KEY_ID: ${{ secrets.AWS_ACCESS_KEY_ID }}
+        AWS_SECRET_ACCESS_KEY: ${{ secrets.AWS_SECRET_ACCESS_KEY }}
+        AWS_REGION: 'us-west-1'
+        SOURCE_DIR: 'build/${{ matrix.target }}/_metadata/'
+        DEST_DIR: 'Firmware/${{ env.version }}/${{ matrix.target }}/'
+

.github/workflows/mavros_mission_tests.yml

@@ -0,0 +1,137 @@
+name: MAVROS Mission Tests
+
+on:
+  push:
+    branches:
+    - 'master'
+  pull_request:
+    branches:
+    - '*'
+
+jobs:
+  build:
+    runs-on: ubuntu-latest
+    strategy:
+      fail-fast: false
+      matrix:
+        config:
+          - {vehicle: "iris",          mission: "MC_mission_box",  build_type: "RelWithDebInfo"}
+          - {vehicle: "rover",         mission: "rover_mission_1", build_type: "RelWithDebInfo"}
+          #- {vehicle: "plane",         mission: "FW_mission_1",    build_type: "RelWithDebInfo"}
+          #- {vehicle: "plane_catapult",mission: "FW_mission_1",    build_type: "RelWithDebInfo"}
+          #- {vehicle: "standard_vtol", mission: "VTOL_mission_1",  build_type: "Coverage"}
+          #- {vehicle: "standard_vtol", mission: "VTOL_mission_1",  build_type: "AddressSanitizer"}
+          #- {vehicle: "tailsitter",    mission: "VTOL_mission_1",  build_type: "RelWithDebInfo"}
+          #- {vehicle: "tiltrotor",     mission: "VTOL_mission_1",  build_type: "RelWithDebInfo"}
+
+    container:
+      image: px4io/px4-dev-ros-melodic:2021-04-29
+      options: --privileged --ulimit core=-1 --security-opt seccomp=unconfined
+    steps:
+    - uses: actions/checkout@v1
+      with:
+        token: ${{ secrets.ACCESS_TOKEN }}
+
+    - name: Prepare ccache timestamp
+      id: ccache_cache_timestamp
+      shell: cmake -P {0}
+      run: |
+        string(TIMESTAMP current_date "%Y-%m-%d-%H;%M;%S" UTC)
+        message("::set-output name=timestamp::${current_date}")
+    - name: ccache cache files
+      uses: actions/cache@v2
+      with:
+        path: ~/.ccache
+        key: sitl_tests-${{matrix.config.build_type}}-ccache-${{steps.ccache_cache_timestamp.outputs.timestamp}}
+        restore-keys: sitl_tests-${{matrix.config.build_type}}-ccache-
+    - name: setup ccache
+      run: |
+          mkdir -p ~/.ccache
+          echo "base_dir = ${GITHUB_WORKSPACE}" > ~/.ccache/ccache.conf
+          echo "compression = true" >> ~/.ccache/ccache.conf
+          echo "compression_level = 5" >> ~/.ccache/ccache.conf
+          echo "max_size = 100M" >> ~/.ccache/ccache.conf
+          ccache -s
+          ccache -z
+
+    - name: check environment
+      run: |
+          export
+          ulimit -a
+    - name: Build PX4 and sitl_gazebo
+      env:
+        PX4_CMAKE_BUILD_TYPE: ${{matrix.config.build_type}}
+      run: |
+        ccache -z
+        make px4_sitl_default
+        make px4_sitl_default sitl_gazebo
+        ccache -s
+
+    - name: Core dump settings
+      run: |
+          ulimit -c unlimited
+          echo "`pwd`/%e.core" > /proc/sys/kernel/core_pattern
+
+    - name: Run SITL tests
+      env:
+        PX4_CMAKE_BUILD_TYPE: ${{matrix.config.build_type}}
+      run: |
+        export
+        ./test/rostest_px4_run.sh mavros_posix_test_mission.test mission:=${{matrix.config.mission}} vehicle:=${{matrix.config.vehicle}}
+
+    - name: Look at core files
+      if: failure()
+      run: gdb build/px4_sitl_default/bin/px4 px4.core -ex "thread apply all bt" -ex "quit"
+    - name: Upload px4 coredump
+      if: failure()
+      uses: actions/upload-artifact@v2-preview
+      with:
+        name: coredump
+        path: px4.core
+
+    - name: ecl EKF analysis
+      if: always()
+      run: ./Tools/ecl_ekf/process_logdata_ekf.py ~/.ros/log/*/*.ulg || true
+
+    - name: Upload logs to flight review
+      if: always()
+      run: ./Tools/upload_log.py -q --description "${GITHUB_WORKFLOW} ${GITHUB_RUN_ID}" --feedback "${GITHUB_WORKFLOW} ${GITHUB_RUN_ID} ${GITHUB_REPOSITORY} ${GITHUB_REF}" --source CI ~/.ros/log/*/*.ulg
+
+    - name: Upload px4 binary
+      if: failure()
+      uses: actions/upload-artifact@v2
+      with:
+        name: binary
+        path: build/px4_sitl_default/bin/px4
+
+    - name: Store PX4 log
+      if: failure()
+      uses: actions/upload-artifact@v2
+      with:
+        name: px4_log
+        path: ~/.ros/log/*/*.ulg
+
+    - name: Store ROS log
+      if: failure()
+      uses: actions/upload-artifact@v2
+      with:
+        name: ros_log
+        path: ~/.ros/**/rostest-*.log
+
+    # Report test coverage
+    - name: Upload coverage
+      if: contains(matrix.config.build_type, 'Coverage')
+      run: |
+          git config --global credential.helper "" # disable the keychain credential helper
+          git config --global --add credential.helper store # enable the local store credential helper
+          echo "https://x-access-token:${{ secrets.ACCESS_TOKEN }}@github.com" >> ~/.git-credentials # add credential
+          git config --global url."https://github.com/".insteadof git@github.com: # credentials add credential
+          mkdir -p coverage
+          lcov --directory build/px4_sitl_default --base-directory build/px4_sitl_default --gcov-tool gcov --capture -o coverage/lcov.info
+    - name: Upload coverage information to Codecov
+      if: contains(matrix.config.build_type, 'Coverage')
+      uses: codecov/codecov-action@v1
+      with:
+        token: ${{ secrets.CODECOV_TOKEN }}
+        flags: mavros_mission
+        file: coverage/lcov.info

.github/workflows/mavros_offboard_tests.yml

@@ -0,0 +1,132 @@
+name: MAVROS Offboard Tests
+
+on:
+  push:
+    branches:
+    - 'master'
+  pull_request:
+    branches:
+    - '*'
+
+jobs:
+  build:
+    runs-on: ubuntu-latest
+    strategy:
+      fail-fast: false
+      matrix:
+        config:
+          - {test_file: "mavros_posix_tests_offboard_posctl.test",    vehicle: "iris", build_type: "RelWithDebInfo"}
+          #- {test_file: "mavros_posix_tests_offboard_attctl.test",    vehicle: "iris", build_type: "RelWithDebInfo"}
+          #- {test_file: "mavros_posix_tests_offboard_rpyrt_ctl.test", vehicle: "iris", build_type: "RelWithDebInfo"}
+
+    container:
+      image: px4io/px4-dev-ros-melodic:2021-04-29
+      options: --privileged --ulimit core=-1 --security-opt seccomp=unconfined
+    steps:
+    - uses: actions/checkout@v1
+      with:
+        token: ${{ secrets.ACCESS_TOKEN }}
+
+    - name: Prepare ccache timestamp
+      id: ccache_cache_timestamp
+      shell: cmake -P {0}
+      run: |
+        string(TIMESTAMP current_date "%Y-%m-%d-%H;%M;%S" UTC)
+        message("::set-output name=timestamp::${current_date}")
+    - name: ccache cache files
+      uses: actions/cache@v2
+      with:
+        path: ~/.ccache
+        key: sitl_tests-${{matrix.config.build_type}}-ccache-${{steps.ccache_cache_timestamp.outputs.timestamp}}
+        restore-keys: sitl_tests-${{matrix.config.build_type}}-ccache-
+    - name: setup ccache
+      run: |
+          mkdir -p ~/.ccache
+          echo "base_dir = ${GITHUB_WORKSPACE}" > ~/.ccache/ccache.conf
+          echo "compression = true" >> ~/.ccache/ccache.conf
+          echo "compression_level = 5" >> ~/.ccache/ccache.conf
+          echo "max_size = 100M" >> ~/.ccache/ccache.conf
+          ccache -s
+          ccache -z
+
+    - name: check environment
+      run: |
+          export
+          ulimit -a
+    - name: Build PX4 and sitl_gazebo
+      env:
+        PX4_CMAKE_BUILD_TYPE: ${{matrix.config.build_type}}
+      run: |
+        ccache -z
+        make px4_sitl_default
+        make px4_sitl_default sitl_gazebo
+        ccache -s
+
+    - name: Core dump settings
+      run: |
+          ulimit -c unlimited
+          echo "`pwd`/%e.core" > /proc/sys/kernel/core_pattern
+
+    - name: Run SITL tests
+      env:
+        PX4_CMAKE_BUILD_TYPE: ${{matrix.config.build_type}}
+      run: |
+        export
+        ./test/rostest_px4_run.sh ${{matrix.config.test_file}} vehicle:=${{matrix.config.vehicle}}
+
+    - name: Look at core files
+      if: failure()
+      run: gdb build/px4_sitl_default/bin/px4 px4.core -ex "thread apply all bt" -ex "quit"
+    - name: Upload px4 coredump
+      if: failure()
+      uses: actions/upload-artifact@v2-preview
+      with:
+        name: coredump
+        path: px4.core
+
+    - name: ecl EKF analysis
+      if: always()
+      run: ./Tools/ecl_ekf/process_logdata_ekf.py ~/.ros/log/*/*.ulg || true
+
+    - name: Upload logs to flight review
+      if: always()
+      run: ./Tools/upload_log.py -q --description "${GITHUB_WORKFLOW} ${GITHUB_RUN_ID}" --feedback "${GITHUB_WORKFLOW} ${GITHUB_RUN_ID} ${GITHUB_REPOSITORY} ${GITHUB_REF}" --source CI ~/.ros/log/*/*.ulg
+
+    - name: Upload px4 binary
+      if: failure()
+      uses: actions/upload-artifact@v2
+      with:
+        name: binary
+        path: build/px4_sitl_default/bin/px4
+
+    - name: Store PX4 log
+      if: failure()
+      uses: actions/upload-artifact@v2
+      with:
+        name: px4_log
+        path: ~/.ros/log/*/*.ulg
+
+    - name: Store ROS log
+      if: failure()
+      uses: actions/upload-artifact@v2
+      with:
+        name: ros_log
+        path: ~/.ros/**/rostest-*.log
+
+    # Report test coverage
+    - name: Upload coverage
+      if: contains(matrix.config.build_type, 'Coverage')
+      run: |
+          git config --global credential.helper "" # disable the keychain credential helper
+          git config --global --add credential.helper store # enable the local store credential helper
+          echo "https://x-access-token:${{ secrets.ACCESS_TOKEN }}@github.com" >> ~/.git-credentials # add credential
+          git config --global url."https://github.com/".insteadof git@github.com: # credentials add credential
+          mkdir -p coverage
+          lcov --directory build/px4_sitl_default --base-directory build/px4_sitl_default --gcov-tool gcov --capture -o coverage/lcov.info
+    - name: Upload coverage information to Codecov
+      if: contains(matrix.config.build_type, 'Coverage')
+      uses: codecov/codecov-action@v1
+      with:
+        token: ${{ secrets.CODECOV_TOKEN }}
+        flags: mavros_offboard
+        file: coverage/lcov.info

.github/workflows/metadata.yml

@@ -0,0 +1,119 @@
+name: Metadata
+
+on:
+  push:
+    branches:
+    - 'master'
+    - 'release/*'
+    - 'pr-metadata-test'
+
+jobs:
+
+  airframe:
+    runs-on: ubuntu-latest
+    container: ghcr.io/px4/px4-dev:2021-05-06
+    steps:
+    - uses: actions/checkout@v1
+      with:
+        token: ${{ secrets.ACCESS_TOKEN }}
+
+    - name: airframe metadata
+      run: |
+        make airframe_metadata
+        cd build/px4_sitl_default/docs
+        ls -ls *
+      # TODO: deploy to userguide gitbook and s3
+
+  module:
+    runs-on: ubuntu-latest
+    container: ghcr.io/px4/px4-dev:2021-05-06
+    steps:
+    - uses: actions/checkout@v1
+      with:
+        token: ${{ secrets.ACCESS_TOKEN }}
+
+    - name: module documentation
+      run: |
+        make module_documentation
+        cd build/px4_sitl_default/docs
+        ls -ls *
+      # TODO: deploy to userguide gitbook and s3
+
+  parameter:
+    runs-on: ubuntu-latest
+    container: ghcr.io/px4/px4-dev:2021-05-06
+    steps:
+    - uses: actions/checkout@v1
+      with:
+        token: ${{ secrets.ACCESS_TOKEN }}
+
+    - name: parameter metadata
+      run: |
+        make parameters_metadata
+        ./src/lib/version/get_git_tag_or_branch_version.sh build/px4_sitl_default >> $GITHUB_ENV
+
+    - uses: jakejarvis/s3-sync-action@master
+      with:
+        args: --acl public-read
+      env:
+        AWS_S3_BUCKET: 'px4-travis'
+        AWS_ACCESS_KEY_ID: ${{ secrets.AWS_ACCESS_KEY_ID }}
+        AWS_SECRET_ACCESS_KEY: ${{ secrets.AWS_SECRET_ACCESS_KEY }}
+        AWS_REGION: 'us-west-1'
+        SOURCE_DIR: 'build/px4_sitl_default/docs/'
+        DEST_DIR: 'Firmware/${{ env.version }}/_general/'
+
+  uorb_graph:
+    runs-on: ubuntu-latest
+    container: ghcr.io/px4/px4-dev:2021-05-06
+    steps:
+    - uses: actions/checkout@v1
+      with:
+        token: ${{ secrets.ACCESS_TOKEN }}
+
+    - name: uORB graph
+      run: |
+        make uorb_graphs
+        cd Tools/uorb_graph
+        ls -ls *
+      # TODO: deploy graph_px4_sitl.json to S3 px4-travis:Firmware/master/
+
+  micrortps_agent:
+    runs-on: ubuntu-latest
+    container: ghcr.io/px4/px4-dev:2021-05-06
+    steps:
+    - uses: actions/checkout@v1
+      with:
+        token: ${{ secrets.ACCESS_TOKEN }}
+
+    - name: microRTPS agent
+      run: |
+        make px4_sitl_rtps
+        git clone https://github.com/PX4/micrortps_agent.git
+        cp -R build/px4_sitl_rtps/src/modules/micrortps_bridge/micrortps_agent/* micrortps_agent
+
+  ROS_msgs:
+    runs-on: ubuntu-latest
+    container: ghcr.io/px4/px4-dev:2021-05-06
+    steps:
+    - uses: actions/checkout@v1
+      with:
+        token: ${{ secrets.ACCESS_TOKEN }}
+
+    - name: PX4 ROS msgs
+      run: |
+        git clone https://github.com/PX4/px4_msgs.git
+        python3 msg/tools/uorb_to_ros_msgs.py msg/ px4_msgs/msg/
+
+  ROS2_bridge:
+    runs-on: ubuntu-latest
+    container: ghcr.io/px4/px4-dev:2021-05-06
+    steps:
+    - uses: actions/checkout@v1
+      with:
+        token: ${{ secrets.ACCESS_TOKEN }}
+
+    - name: PX4 ROS2 bridge
+      run: |
+        git clone https://github.com/PX4/px4_ros_com.git
+        ./msg/tools/uorb_to_ros_rtps_ids.py -i msg/tools/uorb_rtps_message_ids.yaml -o px4_ros_com/templates/uorb_rtps_message_ids.yaml

.github/workflows/python_checks.yml

@@ -0,0 +1,25 @@
+name: Python CI Checks
+
+on:
+  push:
+    branches:
+    - 'master'
+  pull_request:
+    branches:
+    - '*'
+
+jobs:
+  build:
+    runs-on: ubuntu-latest
+    steps:
+    - uses: actions/checkout@v1
+      with:
+        token: ${{ secrets.ACCESS_TOKEN }}
+    - name: Install Python3
+      run: sudo apt-get install python3 python3-setuptools python3-pip -y
+    - name: Install tools
+      run: pip3 install --user mypy flake8
+    - name: Check MAVSDK test scripts with mypy
+      run: $HOME/.local/bin/mypy --strict test/mavsdk_tests/*.py
+    - name: Check MAVSDK test scripts with flake8
+      run: $HOME/.local/bin/flake8 test/mavsdk_tests/*.py

.github/workflows/sitl_tests.yml

@@ -0,0 +1,132 @@
+name: SITL Tests
+
+on:
+  push:
+    branches:
+    - 'master'
+  pull_request:
+    branches:
+    - '*'
+
+jobs:
+  build:
+    runs-on: ubuntu-latest
+    strategy:
+      fail-fast: false
+      matrix:
+        config:
+          - {latitude:  "59.617693", longitude: "-151.145316", altitude:  "48", build_type: "RelWithDebInfo", model: "iris"          } # Alaska
+          - {latitude: "-38.071235", longitude:  "145.281220", altitude:  "31", build_type: "RelWithDebInfo", model: "standard_vtol" } # Australia
+          - {latitude:  "29.660316", longitude:  "-82.316658", altitude:  "30", build_type: "RelWithDebInfo", model: "tailsitter"    } # Florida
+          - {latitude:  "47.397742", longitude:    "8.545594", altitude: "488", build_type: "Coverage",       model: "standard_vtol" } # Zurich
+    container:
+      image: px4io/px4-dev-simulation-focal:2021-04-29
+      options: --privileged --ulimit core=-1 --security-opt seccomp=unconfined
+    steps:
+    - uses: actions/checkout@v1
+      with:
+        token: ${{ secrets.ACCESS_TOKEN }}
+
+    - name: Download MAVSDK
+      run: wget "https://github.com/mavlink/MAVSDK/releases/download/v$(cat test/mavsdk_tests/MAVSDK_VERSION)/mavsdk_$(cat test/mavsdk_tests/MAVSDK_VERSION)_ubuntu20.04_amd64.deb"
+    - name: Install MAVSDK
+      run: dpkg -i "mavsdk_$(cat test/mavsdk_tests/MAVSDK_VERSION)_ubuntu20.04_amd64.deb"
+
+    - name: Prepare ccache timestamp
+      id: ccache_cache_timestamp
+      shell: cmake -P {0}
+      run: |
+        string(TIMESTAMP current_date "%Y-%m-%d-%H;%M;%S" UTC)
+        message("::set-output name=timestamp::${current_date}")
+    - name: ccache cache files
+      uses: actions/cache@v2
+      with:
+        path: ~/.ccache
+        key: sitl_tests-${{matrix.config.build_type}}-ccache-${{steps.ccache_cache_timestamp.outputs.timestamp}}
+        restore-keys: sitl_tests-${{matrix.config.build_type}}-ccache-
+    - name: setup ccache
+      run: |
+          mkdir -p ~/.ccache
+          echo "base_dir = ${GITHUB_WORKSPACE}" > ~/.ccache/ccache.conf
+          echo "compression = true" >> ~/.ccache/ccache.conf
+          echo "compression_level = 5" >> ~/.ccache/ccache.conf
+          echo "max_size = 100M" >> ~/.ccache/ccache.conf
+          ccache -s
+          ccache -z
+
+    - name: check environment
+      env:
+        PX4_HOME_LAT: ${{matrix.config.latitude}}
+        PX4_HOME_LON: ${{matrix.config.longitude}}
+        PX4_HOME_ALT: ${{matrix.config.altitude}}
+        PX4_CMAKE_BUILD_TYPE: ${{matrix.config.build_type}}
+      run: |
+          export
+          ulimit -a
+    - name: Build PX4
+      env:
+        PX4_CMAKE_BUILD_TYPE: ${{matrix.config.build_type}}
+      run: make px4_sitl_default
+    - name: ccache post-run px4/firmware
+      run: ccache -s
+    - name: Build SITL Gazebo
+      env:
+        PX4_CMAKE_BUILD_TYPE: ${{matrix.config.build_type}}
+      run: make px4_sitl_default sitl_gazebo
+    - name: ccache post-run sitl_gazebo
+      run: ccache -s
+    - name: Build MAVSDK tests
+      env:
+        PX4_CMAKE_BUILD_TYPE: ${{matrix.config.build_type}}
+        DONT_RUN: 1
+      run: make px4_sitl_default gazebo mavsdk_tests
+    - name: ccache post-run mavsdk_tests
+      run: ccache -s
+
+    - name: Core dump settings
+      run: |
+          ulimit -c unlimited
+          echo "`pwd`/%e.core" > /proc/sys/kernel/core_pattern
+
+    - name: Run SITL tests
+      env:
+        PX4_HOME_LAT: ${{matrix.config.latitude}}
+        PX4_HOME_LON: ${{matrix.config.longitude}}
+        PX4_HOME_ALT: ${{matrix.config.altitude}}
+        PX4_CMAKE_BUILD_TYPE: ${{matrix.config.build_type}}
+      run: test/mavsdk_tests/mavsdk_test_runner.py --speed-factor 20 --abort-early --model ${{matrix.config.model}} --upload test/mavsdk_tests/configs/sitl.json
+
+    - name: Look at core files
+      if: failure()
+      run: gdb build/px4_sitl_default/bin/px4 px4.core -ex "thread apply all bt" -ex "quit"
+    - name: Upload px4 coredump
+      if: failure()
+      uses: actions/upload-artifact@v2-preview
+      with:
+        name: coredump
+        path: px4.core
+
+    - name: Upload px4 binary
+      if: failure()
+      uses: actions/upload-artifact@v2-preview
+      with:
+        name: binary
+        path: build/px4_sitl_default/bin/px4
+
+    # Report test coverage
+    - name: Upload coverage
+      if: contains(matrix.config.build_type, 'Coverage')
+      run: |
+          git config --global credential.helper "" # disable the keychain credential helper
+          git config --global --add credential.helper store # enable the local store credential helper
+          echo "https://x-access-token:${{ secrets.ACCESS_TOKEN }}@github.com" >> ~/.git-credentials # add credential
+          git config --global url."https://github.com/".insteadof git@github.com: # credentials add credential
+          mkdir -p coverage
+          lcov --directory build/px4_sitl_default --base-directory build/px4_sitl_default --gcov-tool gcov --capture -o coverage/lcov.info
+    - name: Upload coverage information to Codecov
+      if: contains(matrix.config.build_type, 'Coverage')
+      uses: codecov/codecov-action@v1
+      with:
+        token: ${{ secrets.CODECOV_TOKEN }}
+        flags: mavsdk
+        file: coverage/lcov.info

.gitignore

@@ -105,4 +105,6 @@ src/lib/version/build_git_version.h
 src/modules/simulator/simulator_config.h
 src/systemcmds/topic_listener/listener_generated.cpp
 
-!src/drivers/distance_sensor/broadcom/afbrs50/Lib/*
+# SITL
+dataman
+eeprom/

.gitmodules

@@ -1,19 +1,31 @@
-[submodule "src/modules/mavlink/mavlink"]
+[submodule "mavlink/include/mavlink/v2.0"]
-	path = src/modules/mavlink/mavlink
+	path = mavlink/include/mavlink/v2.0
-	url = https://github.com/Auterion/mavlink.git
+	url = https://github.com/mavlink/c_library_v2.git
 	branch = master
 [submodule "src/drivers/uavcan/libuavcan"]
 	path = src/drivers/uavcan/libuavcan
-	url = https://github.com/dronecan/libuavcan.git
+	url = https://github.com/PX4/libuavcan.git
-	branch = main
+	branch = px4
 [submodule "Tools/jMAVSim"]
 	path = Tools/jMAVSim
 	url = https://github.com/PX4/jMAVSim.git
 	branch = master
 [submodule "Tools/sitl_gazebo"]
 	path = Tools/sitl_gazebo
-	url = git@github.com:Auterion/sitl_gazebo.git
+	url = https://github.com/PX4/PX4-SITL_gazebo.git
-	branch = develop
+	branch = master
+[submodule "src/lib/matrix"]
+	path = src/lib/matrix
+	url = https://github.com/PX4/PX4-Matrix.git
+	branch = master
+[submodule "src/lib/ecl"]
+	path = src/lib/ecl
+	url = https://github.com/PX4/PX4-ECL.git
+	branch = master
+[submodule "boards/atlflight/cmake_hexagon"]
+	path = boards/atlflight/cmake_hexagon
+	url = https://github.com/PX4/cmake_hexagon.git
+	branch = px4
 [submodule "src/drivers/gps/devices"]
 	path = src/drivers/gps/devices
 	url = https://github.com/PX4/PX4-GPSDrivers.git
@@ -25,45 +37,33 @@
 [submodule "platforms/nuttx/NuttX/nuttx"]
 	path = platforms/nuttx/NuttX/nuttx
 	url = https://github.com/PX4/NuttX.git
-	branch = px4_firmware_nuttx-10.1.0+
+	branch = px4_firmware_nuttx-10.0.0+
 [submodule "platforms/nuttx/NuttX/apps"]
 	path = platforms/nuttx/NuttX/apps
 	url = https://github.com/PX4/NuttX-apps.git
-	branch = px4_firmware_nuttx-10.1.0+
+	branch = px4_firmware_nuttx-10.0.0+
+[submodule "platforms/qurt/dspal"]
+	path = platforms/qurt/dspal
+	url = https://github.com/ATLFlight/dspal.git
 [submodule "Tools/flightgear_bridge"]
 	path = Tools/flightgear_bridge
 	url = https://github.com/PX4/PX4-FlightGear-Bridge.git
 [submodule "Tools/jsbsim_bridge"]
 	path = Tools/jsbsim_bridge
 	url = https://github.com/PX4/px4-jsbsim-bridge.git
-[submodule "src/drivers/cyphal/libcanard"]
+[submodule "src/drivers/uavcan_v1/libcanard"]
-	path = src/drivers/cyphal/libcanard
+	path = src/drivers/uavcan_v1/libcanard
-	url = https://github.com/opencyphal/libcanard.git
+	url = https://github.com/UAVCAN/libcanard.git
-[submodule "src/drivers/cyphal/public_regulated_data_types"]
+[submodule "src/drivers/uavcan_v1/public_regulated_data_types"]
-	path = src/drivers/cyphal/public_regulated_data_types
+	path = src/drivers/uavcan_v1/public_regulated_data_types
-	url = https://github.com/opencyphal/public_regulated_data_types.git
+	url = https://github.com/UAVCAN/public_regulated_data_types.git
-[submodule "src/drivers/cyphal/legacy_data_types"]
+[submodule "src/drivers/uavcannode_gps_demo/public_regulated_data_types"]
-	path = src/drivers/cyphal/legacy_data_types
+	path = src/drivers/uavcannode_gps_demo/public_regulated_data_types
-	url = https://github.com/PX4/public_regulated_data_types.git
+	url = https://github.com/UAVCAN/public_regulated_data_types.git
+[submodule "src/drivers/uavcannode_gps_demo/libcanard"]
+	path = src/drivers/uavcannode_gps_demo/libcanard
+	url = https://github.com/UAVCAN/libcanard.git
+[submodule "src/drivers/uavcan_v1/legacy_data_types"]
+	path = src/drivers/uavcan_v1/legacy_data_types
+	url = https://github.com/px4/public_regulated_data_types/
 	branch = legacy
-[submodule "src/lib/crypto/monocypher"]
-	path = src/lib/crypto/monocypher
-	url = https://github.com/PX4/Monocypher.git
-	branch = px4
-[submodule "src/lib/events/libevents"]
-	path = src/lib/events/libevents
-	url = https://github.com/mavlink/libevents.git
-[submodule "Tools/simulation-ignition"]
-	path = Tools/simulation-ignition
-	url = https://github.com/PX4/px4-simulation-ignition.git
-[submodule "src/lib/crypto/libtomcrypt"]
-	path = src/lib/crypto/libtomcrypt
-	url = https://github.com/PX4/libtomcrypt.git
-	branch = px4
-[submodule "src/lib/crypto/libtommath"]
-	path = src/lib/crypto/libtommath
-	url = https://github.com/PX4/libtommath.git
-	branch = px4
-[submodule "src/modules/microdds_client/Micro-XRCE-DDS-Client"]
-	path = src/modules/microdds_client/Micro-XRCE-DDS-Client
-	url = https://github.com/eProsima/Micro-XRCE-DDS-Client.git

.vscode/.gitignore

@@ -9,5 +9,3 @@ launch.json
 ipch/
 
 browse.vc.db*
-
-*.log

.vscode/cmake-variants.yaml

@@ -6,21 +6,6 @@ CONFIG:
       buildType: RelWithDebInfo
       settings:
         CONFIG: px4_sitl_default
-    px4_sitl_rtps:
-      short: px4_sitl_rtps
-      buildType: RelWithDebInfo
-      settings:
-        CONFIG: px4_sitl_rtps
-    px4_sitl_asan:
-      short: px4_sitl (AddressSanitizer)
-      buildType: AddressSanitizer
-      settings:
-        CONFIG: px4_sitl_default
-    px4_sitl_ubsan:
-      short: px4_sitl (UndefinedBehaviorSanitizer)
-      buildType: UndefinedBehaviorSanitizer
-      settings:
-        CONFIG: px4_sitl_default
     px4_sitl_replay:
       short: px4_sitl_replay
       buildType: RelWithDebInfo
@@ -61,26 +46,11 @@ CONFIG:
       buildType: MinSizeRel
       settings:
         CONFIG: px4_fmu-v5_default
-    px4_fmu-v5_debug:
-      short: px4_fmu-v5_debug
-      buildType: MinSizeRel
-      settings:
-        CONFIG: px4_fmu-v5_debug
     px4_fmu-v5x_default:
       short: px4_fmu-v5x
       buildType: MinSizeRel
       settings:
         CONFIG: px4_fmu-v5x_default
-    px4_fmu-v6x_default:
-      short: px4_fmu-v6x
-      buildType: MinSizeRel
-      settings:
-        CONFIG: px4_fmu-v6x_default
-    px4_fmu-v6x_bootloader:
-      short: px4_fmu-v6x_bootloader
-      buildType: MinSizeRel
-      settings:
-        CONFIG: px4_fmu-v6x_bootloader
     airmind_mindpx-v2_default:
       short: airmind_mindpx-v2
       buildType: MinSizeRel
@@ -96,46 +66,6 @@ CONFIG:
       buildType: MinSizeRel
       settings:
         CONFIG: ark_can-flow_canbootloader
-    ark_can-gps_default:
-      short: ark_can-gps_default
-      buildType: MinSizeRel
-      settings:
-        CONFIG: ark_can-gps_default
-    ark_can-gps_canbootloader:
-      short: ark_can-gps_canbootloader
-      buildType: MinSizeRel
-      settings:
-        CONFIG: ark_can-gps_canbootloader
-    ark_can-rtk-gps_default:
-      short: ark_can-rtk-gps_default
-      buildType: MinSizeRel
-      settings:
-        CONFIG: ark_can-rtk-gps_default
-    ark_can-rtk-gps_debug:
-      short: ark_can-rtk-gps_debug
-      buildType: MinSizeRel
-      settings:
-        CONFIG: ark_can-rtk-gps_debug
-    ark_can-rtk-gps_canbootloader:
-      short: ark_can-rtk-gps_canbootloader
-      buildType: MinSizeRel
-      settings:
-        CONFIG: ark_can-rtk-gps_canbootloader
-    ark_cannode_default:
-      short: ark_cannode_default
-      buildType: MinSizeRel
-      settings:
-        CONFIG: ark_cannode_default
-    ark_cannode_canbootloader:
-      short: ark_cannode_canbootloader
-      buildType: MinSizeRel
-      settings:
-        CONFIG: ark_cannode_canbootloader
-    atl_mantis-edu_default:
-      short: atl_mantis-edu
-      buildType: MinSizeRel
-      settings:
-        CONFIG: atl_mantis-edu_default
     av_x-v1_default:
       short: av_x-v1
       buildType: MinSizeRel
@@ -176,16 +106,6 @@ CONFIG:
       buildType: MinSizeRel
       settings:
         CONFIG: emlid_navio2_default
-    freefly_can-rtk-gps_default:
-      short: freefly_can-rtk-gps_default
-      buildType: MinSizeRel
-      settings:
-        CONFIG: freefly_can-rtk-gps_default
-    freefly_can-rtk-gps_canbootloader:
-      short: freefly_can-rtk-gps_canbootloader
-      buildType: MinSizeRel
-      settings:
-        CONFIG: freefly_can-rtk-gps_canbootloader
     holybro_can-gps-v1_canbootloader:
       short: holybro_can-gps-v1_canbootloader
       buildType: MinSizeRel
@@ -201,31 +121,11 @@ CONFIG:
       buildType: MinSizeRel
       settings:
         CONFIG: holybro_durandal-v1_default
-    matek_h743-slim_default:
-      short: matek_h743-slim
-      buildType: MinSizeRel
-      settings:
-        CONFIG: matek_h743-slim_default
-    matek_gnss-m9n-f4_canbootloader:
-      short: matek_gnss-m9n-f4_canbootloader
-      buildType: MiniSizeRel
-      settings:
-        CONFIG: matek_m9nf4can_canbootloader
-    matek_gnss-m9n-f4_default:
-      short: matek_gnss-m9n-f4_default
-      buildType: MiniSizeRel
-      settings:
-        CONFIG: matek_gnss-m9n-f4_default
     modalai_fc-v1_default:
       short: modalai_fc-v1
       buildType: MinSizeRel
       settings:
         CONFIG: modalai_fc-v1_default
-    modalai_fc-v2_default:
-      short: modalai_fc-v2
-      buildType: MinSizeRel
-      settings:
-        CONFIG: modalai_fc-v2_default
     mro_ctrl-zero-f7_default:
       short: mro_ctrl-zero-f7
       buildType: MinSizeRel
@@ -251,8 +151,3 @@ CONFIG:
       buildType: MinSizeRel
       settings:
         CONFIG: nxp_fmuk66-v3_default
-    raspberrypi_pico_default:
-      short: raspberrypi_pico
-      buildType: MinSizeRel
-      settings:
-        CONFIG: raspberrypi_pico_default

.vscode/settings.json

@@ -14,6 +14,7 @@
         "C_Cpp.workspaceParsingPriority": "low",
         "cmake.buildBeforeRun": true,
         "cmake.buildDirectory": "${workspaceFolder}/build/${variant:CONFIG}",
+        "cmake.buildTask": true,
         "cmake.configureOnOpen": true,
         "cmake.ctest.parallelJobs": 1,
         "cmake.skipConfigureIfCachePresent": true,
@@ -30,6 +31,7 @@
                 "esc"
         ],
         "debug.toolBarLocation": "docked",
+        "editor.acceptSuggestionOnEnter": "off",
         "editor.defaultFormatter": "chiehyu.vscode-astyle",
         "editor.dragAndDrop": false,
         "editor.insertSpaces": false,
@@ -126,6 +128,8 @@
         },
         "search.showLineNumbers": true,
         "telemetry.enableTelemetry": false,
+        "terminal.integrated.copyOnSelection": true,
+        "terminal.integrated.rightClickBehavior": "paste",
         "terminal.integrated.scrollback": 5000,
         "window.title": "${dirty} ${activeEditorMedium}${separator}${rootName}",
         "workbench.editor.highlightModifiedTabs": true,
@@ -133,6 +137,5 @@
         "workbench.settings.enableNaturalLanguageSearch": false,
         "yaml.schemas": {
                 "${workspaceFolder}/validation/module_schema.yaml": "${workspaceFolder}/src/modules/*/module.yaml"
-        },
+        }
-        "cortex-debug.openocdPath": "${env:PICO_SDK_PATH}/../openocd/src/openocd"       // Added for rp2040
 }

CMakeLists.txt

@@ -40,7 +40,7 @@
 # * Common functions should be included in px_base.cmake.
 #
 # * OS/ board specific fucntions should be include in
-#	px_impl_${PX4_PLATFORM}.cmake
+#	px_impl_${PX4_PLATFORM}.cmake or px4_impl_${PX4_PLATFORM}_${PX4_BOARD}.cmake.
 #
 # Formatting
 # ---------------------------------------------------------------------------
@@ -99,10 +99,10 @@
 #
 #=============================================================================
 
-cmake_minimum_required(VERSION 3.9 FATAL_ERROR)
+cmake_minimum_required(VERSION 3.2 FATAL_ERROR)
 
-set(PX4_SOURCE_DIR "${CMAKE_CURRENT_SOURCE_DIR}" CACHE FILEPATH "PX4 source directory" FORCE)
+set(PX4_SOURCE_DIR "${CMAKE_CURRENT_SOURCE_DIR}")
-set(PX4_BINARY_DIR "${CMAKE_CURRENT_BINARY_DIR}" CACHE FILEPATH "PX4 binary directory" FORCE)
+set(PX4_BINARY_DIR "${CMAKE_CURRENT_BINARY_DIR}")
 
 list(APPEND CMAKE_MODULE_PATH ${PX4_SOURCE_DIR}/cmake)
 include(px4_parse_function_args)
@@ -125,19 +125,10 @@ define_property(GLOBAL PROPERTY PX4_MODULE_LIBRARIES
                  FULL_DOCS "List of all PX4 module libraries"
                  )
 
-define_property(GLOBAL PROPERTY PX4_KERNEL_MODULE_LIBRARIES
-                 BRIEF_DOCS "PX4 kernel side module libs"
-                 FULL_DOCS "List of all PX4 kernel module libraries"
-                 )
-
 define_property(GLOBAL PROPERTY PX4_MODULE_PATHS
                  BRIEF_DOCS "PX4 module paths"
                  FULL_DOCS "List of paths to all PX4 modules"
                  )
-define_property(GLOBAL PROPERTY PX4_SRC_FILES
-                 BRIEF_DOCS "src files from all PX4 modules & libs"
-                 FULL_DOCS "SRC files from px4_add_{module,library}"
-                 )
 
 #=============================================================================
 # configuration
@@ -147,41 +138,13 @@ set(CONFIG "px4_sitl_default" CACHE STRING "desired configuration")
 
 include(px4_add_module)
 set(config_module_list)
-set(config_kernel_list)
-
-# Find Python
-# If using catkin, Python 2 is found since it points
-# to the Python libs installed with the ROS distro
-if (NOT CATKIN_DEVEL_PREFIX)
-	find_package(PythonInterp 3)
-	# We have a custom error message to tell users how to install python3.
-	if (NOT PYTHONINTERP_FOUND)
-		message(FATAL_ERROR "Python 3 not found. Please install Python 3:\n"
-			"    Ubuntu: sudo apt install python3 python3-dev python3-pip\n"
-			"    macOS: brew install python")
-	endif()
-else()
-	find_package(PythonInterp REQUIRED)
-endif()
-
-option(PYTHON_COVERAGE "Python code coverage" OFF)
-if(PYTHON_COVERAGE)
-	message(STATUS "python coverage enabled")
-	set(PYTHON_EXECUTABLE coverage run -p)
-endif()
 
 include(px4_config)
-include(kconfig)
+include(px4_add_board)
+include(${PX4_CONFIG_FILE})
 message(STATUS "PX4 config: ${PX4_CONFIG}")
 message(STATUS "PX4 platform: ${PX4_PLATFORM}")
 
-if($ENV{CLION_IDE})
-	# CLion automatically executes some compiler commands after configuring the
-	# project. This would fail on NuttX, as visibility.h tries to (indirectly)
-	# include nuttx/config.h, which at that point does not exist yet
-	add_definitions(-DPX4_DISABLE_GCC_POISON)
-endif()
-
 if(${PX4_PLATFORM} STREQUAL "posix")
 	if(ENABLE_LOCKSTEP_SCHEDULER)
 		add_definitions(-DENABLE_LOCKSTEP_SCHEDULER)
@@ -191,18 +154,6 @@ if(${PX4_PLATFORM} STREQUAL "posix")
 	endif()
 endif()
 
-
-option(PX4_RESTRICTED_BUILD "Enable restricted build (limit param access)" OFF)
-if(PX4_RESTRICTED_BUILD)
-	add_definitions(-DPX4_RESTRICTED_BUILD)
-	message(STATUS "Enabling restricted build")
-endif()
-
-if(PX4_EXPORT_CONTROLLED_BUILD)
-	add_definitions(-DPX4_EXPORT_CONTROLLED_BUILD)
-	message(STATUS "Enabling export controlled build (with flight time and wind restrictions)")
-endif()
-
 # external modules
 set(EXTERNAL_MODULES_LOCATION "" CACHE STRING "External modules source location")
 
@@ -252,14 +203,6 @@ message(STATUS "cmake build type: ${CMAKE_BUILD_TYPE}")
 #
 project(px4 CXX C ASM)
 
-# Check if LTO option and check if toolchain supports it
-if(LTO)
-    include(CheckIPOSupported)
-    check_ipo_supported()
-    message(AUTHOR_WARNING "LTO enabled: LTO is highly experimental and should not be used in production")
-    set(CMAKE_INTERPROCEDURAL_OPTIMIZATION TRUE)
-endif()
-
 set(package-contact "px4users@googlegroups.com")
 
 set(CMAKE_CXX_STANDARD 14)
@@ -336,6 +279,27 @@ if (CATKIN_DEVEL_PREFIX)
 	endif()
 endif()
 
+# Python
+# If using catkin, Python 2 is found since it points
+# to the Python libs installed with the ROS distro
+if (NOT CATKIN_DEVEL_PREFIX)
+	find_package(PythonInterp 3)
+	# We have a custom error message to tell users how to install python3.
+	if (NOT PYTHONINTERP_FOUND)
+		message(FATAL_ERROR "Python 3 not found. Please install Python 3:\n"
+			"    Ubuntu: sudo apt install python3 python3-dev python3-pip\n"
+			"    macOS: brew install python")
+	endif()
+else()
+	find_package(PythonInterp REQUIRED)
+endif()
+
+option(PYTHON_COVERAGE "Python code coverage" OFF)
+if(PYTHON_COVERAGE)
+	message(STATUS "python coverage enabled")
+	set(PYTHON_EXECUTABLE coverage run -p)
+endif()
+
 #=============================================================================
 # get chip and chip manufacturer
 #
@@ -438,7 +402,6 @@ endif()
 # subdirectories
 #
 add_library(parameters_interface INTERFACE)
-add_library(kernel_parameters_interface INTERFACE)
 
 include(px4_add_library)
 add_subdirectory(src/lib EXCLUDE_FROM_ALL)
@@ -454,20 +417,9 @@ foreach(module ${config_module_list})
 	add_subdirectory(src/${module})
 endforeach()
 
-# add events lib after modules and libs as it needs to know all source files (PX4_SRC_FILES)
-add_subdirectory(src/lib/events EXCLUDE_FROM_ALL)
-# metadata needs PX4_MODULE_CONFIG_FILES
-add_subdirectory(src/lib/metadata EXCLUDE_FROM_ALL)
-
 # must be the last module before firmware
 add_subdirectory(src/lib/parameters EXCLUDE_FROM_ALL)
-
-if(${PX4_PLATFORM} STREQUAL "nuttx" AND NOT CONFIG_BUILD_FLAT)
-target_link_libraries(parameters_interface INTERFACE usr_parameters)
-target_link_libraries(kernel_parameters_interface INTERFACE parameters)
-else()
 target_link_libraries(parameters_interface INTERFACE parameters)
-endif()
 
 # firmware added last to generate the builtin for included modules
 add_subdirectory(platforms/${PX4_PLATFORM})
@@ -484,10 +436,8 @@ endforeach()
 
 add_custom_command(OUTPUT ${uorb_graph_config}
 	COMMAND ${PYTHON_EXECUTABLE} ${PX4_SOURCE_DIR}/Tools/uorb_graph/create.py
-		${graph_module_list} --src-path src/lib
+		${graph_module_list}
-		--merge-depends
 		--exclude-path src/examples
-		--exclude-path src/lib/parameters # FIXME: enable & fix
 		--file ${PX4_SOURCE_DIR}/Tools/uorb_graph/graph_${uorb_graph_config}
 	WORKING_DIRECTORY ${PX4_SOURCE_DIR}
 	COMMENT "Generating uORB graph"

Dockerfile

@@ -0,0 +1,29 @@
+#
+# PX4 development environment
+#
+
+FROM ubuntu:20.04
+LABEL maintainer="Daniel Agar <daniel@agar.ca>"
+
+COPY Tools/setup/ubuntu.sh /tmp/ubuntu.sh
+COPY Tools/setup/requirements.txt /tmp/requirements.txt
+RUN DEBIAN_FRONTEND=noninteractive /tmp/ubuntu.sh --no-sim-tools \
+	&& apt-get -y autoremove \
+	&& apt-get clean autoclean \
+	&& rm -rf /var/lib/apt/lists/{apt,dpkg,cache,log} /tmp/* /var/tmp/*
+
+# create user with id 1001 (jenkins docker workflow default)
+RUN useradd --shell /bin/bash -u 1001 -c "" -m user && usermod -a -G dialout user
+
+ENV CCACHE_UMASK=000
+ENV PATH="/usr/lib/ccache:$PATH"
+
+# SITL UDP PORTS
+EXPOSE 14556/udp
+EXPOSE 14557/udp
+
+# create and start as LOCAL_USER_ID
+COPY Tools/setup/entrypoint.sh /usr/local/bin/entrypoint.sh
+ENTRYPOINT ["/usr/local/bin/entrypoint.sh"]
+
+CMD ["/bin/bash"]

Jenkinsfile

@@ -15,7 +15,7 @@ pipeline {
         // stage('Catkin build on ROS workspace') {
         //   agent {
         //     docker {
-        //       image 'px4io/px4-dev-ros-melodic:2021-08-18'
+        //       image 'px4io/px4-dev-ros-melodic:2021-04-29'
         //       args '-e CCACHE_BASEDIR=$WORKSPACE -v ${CCACHE_DIR}:${CCACHE_DIR}:rw -e HOME=$WORKSPACE'
         //     }
         //   }
@@ -56,7 +56,7 @@ pipeline {
         stage('Colcon build on ROS2 workspace') {
           agent {
             docker {
-              image 'px4io/px4-dev-ros2-foxy:2021-08-18'
+              image 'px4io/px4-dev-ros2-foxy:2021-04-29'
               args '-e CCACHE_BASEDIR=$WORKSPACE -v ${CCACHE_DIR}:${CCACHE_DIR}:rw -e HOME=$WORKSPACE'
             }
           }
@@ -85,10 +85,10 @@ pipeline {
 
         stage('Airframe') {
           agent {
-            docker { image 'px4io/px4-dev-base-focal:2021-08-18' }
+            docker { image 'ghcr.io/px4/px4-dev:2021-05-06' }
           }
           steps {
-            sh 'make distclean; git clean -ff -x -d .'
+            sh 'make distclean'
             sh 'git fetch --all --tags'
             sh 'make airframe_metadata'
             dir('build/px4_sitl_default/docs') {
@@ -98,17 +98,17 @@ pipeline {
           }
           post {
             always {
-              sh 'make distclean; git clean -ff -x -d .'
+              sh 'make distclean'
             }
           }
         }
 
         stage('Parameter') {
           agent {
-            docker { image 'px4io/px4-dev-base-focal:2021-08-18' }
+            docker { image 'ghcr.io/px4/px4-dev:2021-05-06' }
           }
           steps {
-            sh 'make distclean; git clean -ff -x -d .'
+            sh 'make distclean'
             sh 'git fetch --all --tags'
             sh 'make parameters_metadata'
             dir('build/px4_sitl_default/docs') {
@@ -118,17 +118,17 @@ pipeline {
           }
           post {
             always {
-              sh 'make distclean; git clean -ff -x -d .'
+              sh 'make distclean'
             }
           }
         }
 
         stage('Module') {
           agent {
-            docker { image 'px4io/px4-dev-base-focal:2021-08-18' }
+            docker { image 'ghcr.io/px4/px4-dev:2021-05-06' }
           }
           steps {
-            sh 'make distclean; git clean -ff -x -d .'
+            sh 'make distclean'
             sh 'git fetch --all --tags'
             sh 'make module_documentation'
             dir('build/px4_sitl_default/docs') {
@@ -138,25 +138,7 @@ pipeline {
           }
           post {
             always {
-              sh 'make distclean; git clean -ff -x -d .'
+              sh 'make distclean'
-            }
-          }
-        }
-
-        stage('msg file docs') {
-          agent {
-            docker { image 'px4io/px4-dev-base-focal:2021-08-18' }
-          }
-          steps {
-            sh 'mkdir -p build/msg_docs; ./msg/tools/generate_msg_docs.py -d build/msg_docs'
-            dir('build') {
-              archiveArtifacts(artifacts: 'msg_docs/*.md')
-              stash includes: 'msg_docs/*.md', name: 'msg_documentation'
-            }
-          }
-          post {
-            always {
-              sh 'make distclean; git clean -ff -x -d .'
             }
           }
         }
@@ -164,23 +146,23 @@ pipeline {
         stage('uORB graphs') {
           agent {
             docker {
-              image 'px4io/px4-dev-nuttx-focal:2021-08-18'
+              image 'px4io/px4-dev-nuttx-focal:2021-04-29'
               args '-e CCACHE_BASEDIR=$WORKSPACE -v ${CCACHE_DIR}:${CCACHE_DIR}:rw'
             }
           }
           steps {
             sh 'export'
-            sh 'make distclean; git clean -ff -x -d .'
+            sh 'make distclean'
             sh 'git fetch --all --tags'
             sh 'make uorb_graphs'
             dir('Tools/uorb_graph') {
-              archiveArtifacts(artifacts: 'graph_*.json')
+              archiveArtifacts(artifacts: 'graph_px4_sitl.json')
-              stash includes: 'graph_*.json', name: 'uorb_graph'
+              stash includes: 'graph_px4_sitl.json', name: 'uorb_graph'
             }
           }
           post {
             always {
-              sh 'make distclean; git clean -ff -x -d .'
+              sh 'make distclean'
             }
           }
         }
@@ -194,22 +176,18 @@ pipeline {
 
         stage('Userguide') {
           agent {
-            docker { image 'px4io/px4-dev-base-focal:2021-08-18' }
+            docker { image 'ghcr.io/px4/px4-dev:2021-05-06' }
           }
           steps {
             sh('export')
             unstash 'metadata_airframes'
             unstash 'metadata_parameters'
             unstash 'metadata_module_documentation'
-            unstash 'msg_documentation'
-            unstash 'uorb_graph'
             withCredentials([usernamePassword(credentialsId: 'px4buildbot_github_personal_token', passwordVariable: 'GIT_PASS', usernameVariable: 'GIT_USER')]) {
               sh('git clone https://${GIT_USER}:${GIT_PASS}@github.com/PX4/px4_user_guide.git')
               sh('cp airframes.md px4_user_guide/en/airframes/airframe_reference.md')
               sh('cp parameters.md px4_user_guide/en/advanced_config/parameter_reference.md')
               sh('cp -R modules/*.md px4_user_guide/en/modules/')
-              sh('cp -R graph_*.json px4_user_guide/.vuepress/public/en/middleware/')
-              sh('cp -R msg_docs/*.md px4_user_guide/en/msg_docs/')
               sh('cd px4_user_guide; git status; git add .; git commit -a -m "Update PX4 Firmware metadata `date`" || true')
               sh('cd px4_user_guide; git push origin master || true')
               sh('rm -rf px4_user_guide')
@@ -228,7 +206,7 @@ pipeline {
 
         stage('QGroundControl') {
           agent {
-            docker { image 'px4io/px4-dev-base-focal:2021-08-18' }
+            docker { image 'ghcr.io/px4/px4-dev:2021-05-06' }
           }
           steps {
             sh('export')
@@ -256,12 +234,12 @@ pipeline {
 
         stage('microRTPS agent') {
           agent {
-            docker { image 'px4io/px4-dev-base-focal:2021-08-18' }
+            docker { image 'ghcr.io/px4/px4-dev:2021-05-06' }
           }
           steps {
             sh('export')
             sh('git fetch --all --tags')
-            sh('make distclean; git clean -ff -x -d .')
+            sh('make distclean')
             sh('make px4_sitl_rtps')
             withCredentials([usernamePassword(credentialsId: 'px4buildbot_github_personal_token', passwordVariable: 'GIT_PASS', usernameVariable: 'GIT_USER')]) {
               sh("git clone https://${GIT_USER}:${GIT_PASS}@github.com/PX4/micrortps_agent.git -b ${BRANCH_NAME}")
@@ -286,11 +264,11 @@ pipeline {
 
         stage('PX4 ROS msgs') {
           agent {
-            docker { image 'px4io/px4-dev-base-focal:2021-08-18' }
+            docker { image 'ghcr.io/px4/px4-dev:2021-05-06' }
           }
           steps {
             sh('export')
-            sh('make distclean; git clean -ff -x -d .')
+            sh('make distclean')
             withCredentials([usernamePassword(credentialsId: 'px4buildbot_github_personal_token', passwordVariable: 'GIT_PASS', usernameVariable: 'GIT_USER')]) {
               sh("git clone https://${GIT_USER}:${GIT_PASS}@github.com/PX4/px4_msgs.git")
               // 'master' branch
@@ -315,15 +293,15 @@ pipeline {
 
         stage('PX4 ROS2 bridge') {
           agent {
-            docker { image 'px4io/px4-dev-base-focal:2021-08-18' }
+            docker { image 'ghcr.io/px4/px4-dev:2021-05-06' }
           }
           steps {
             sh('export')
-            sh('make distclean; git clean -ff -x -d .')
+            sh('make distclean')
             withCredentials([usernamePassword(credentialsId: 'px4buildbot_github_personal_token', passwordVariable: 'GIT_PASS', usernameVariable: 'GIT_USER')]) {
               sh("git clone https://${GIT_USER}:${GIT_PASS}@github.com/PX4/px4_ros_com.git -b ${BRANCH_NAME}")
               // deploy uORB RTPS ID map
-              sh('./msg/tools/uorb_to_ros_urtps_topics.py -i msg/tools/urtps_bridge_topics.yaml -o px4_ros_com/templates/urtps_bridge_topics.yaml')
+              sh('./msg/tools/uorb_to_ros_rtps_ids.py -i msg/tools/uorb_rtps_message_ids.yaml -o px4_ros_com/templates/uorb_rtps_message_ids.yaml')
               sh('cd px4_ros_com; git status; git add .; git commit -a -m "Update uORB RTPS ID map `date`" || true')
               sh('cd px4_ros_com; git push origin ${BRANCH_NAME} || true')
               // deploy uORB RTPS required tools
@@ -358,7 +336,7 @@ pipeline {
 
         stage('S3') {
           agent {
-            docker { image 'px4io/px4-dev-base-focal:2021-08-18' }
+            docker { image 'ghcr.io/px4/px4-dev:2021-05-06' }
           }
           steps {
             sh('export')
@@ -396,7 +374,7 @@ pipeline {
     GIT_COMMITTER_NAME = "PX4BuildBot"
   }
   options {
-    buildDiscarder(logRotator(numToKeepStr: '20', artifactDaysToKeepStr: '30'))
+    buildDiscarder(logRotator(numToKeepStr: '10', artifactDaysToKeepStr: '20'))
-    timeout(time: 90, unit: 'MINUTES')
+    timeout(time: 60, unit: 'MINUTES')
   }
 }

Kconfig

@@ -1,192 +0,0 @@
-# PX4 Firmware Configuration
-
-
-mainmenu "PX4 Firmware Configuration"
-
-comment "Vendor: $(VENDOR)"
-comment "Model: $(MODEL)"
-comment "Label: $(LABEL)"
-
-menu "Toolchain"
-    choice
-        prompt "Platform"
-        default PLATFORM_NUTTX
-        config PLATFORM_NUTTX
-            bool "nuttx"
-        config PLATFORM_POSIX
-            bool "posix"
-        config PLATFORM_QURT
-            bool "qurt"
-    endchoice
-
-    config BOARD_PLATFORM
-        string
-        default "nuttx" if PLATFORM_NUTTX
-        default "posix" if PLATFORM_POSIX
-        default "qurt" if PLATFORM_QURT
-
-    config BOARD_LOCKSTEP
-        bool "Force enable lockstep"
-        depends on PLATFORM_POSIX
-        help
-            forces lockstep behaviour, despite REPLAY env variable
-
-    config BOARD_NOLOCKSTEP
-        bool "Force disable lockstep"
-        depends on PLATFORM_POSIX
-        help
-            forces nolockstep behaviour, despite REPLAY env variable
-
-    config BOARD_LINUX
-        bool "Linux OS"
-        depends on PLATFORM_POSIX
-        help
-            Board Platform is running the Linux operating system
-
-    config BOARD_TOOLCHAIN
-        string "Toolchain"
-        default ""
-
-    config BOARD_ARCHITECTURE
-        string "Architecture"
-        default ""
-
-    config BOARD_LTO
-        bool "(EXPERIMENTAL) Link Time Optimization (LTO)"
-        default n
-        help
-            Enables LTO flag in linker
-            Note: Highly EXPERIMENTAL, furthermore make sure you're using a modern compiler GCC 9 or later
-
-    config BOARD_FULL_OPTIMIZATION
-        bool "Full optmization (O3)"
-        default n
-        help
-            Enables Cmake Release for -O3 optimization
-
-    config BOARD_ROMFSROOT
-        string "ROMFSROOT"
-        default "px4fmu_common"
-        help
-            relative path to the ROMFS root directory
-
-    config BOARD_IO
-        string "IO board name"
-        default "px4_io-v2_default"
-        depends on DRIVERS_PX4IO
-        help
-            name of IO board to be built and included in the ROMFS (requires a valid ROMFSROOT)
-
-    config BOARD_CONSTRAINED_FLASH
-        bool "Contrained flash"
-        help
-            flag to enable constrained flash options (eg limit init script status text)
-
-    config BOARD_NO_HELP
-        bool "No help"
-        help
-            optional condition flag to disable help text on constrained flash systems
-
-    config BOARD_CONSTRAINED_MEMORY
-        bool "Contrained memory"
-        help
-            flag to enable constrained memory options (eg limit maximum number of uORB publications)
-
-    config BOARD_EXTERNAL_METADATA
-        bool "External metadata"
-        help
-            flag to exclude metadata to reduce flash
-
-    config BOARD_LINKER_PREFIX
-        string "linker prefix"
-        help
-            optional to prefix on the Linker script.
-
-    config BOARD_COMPILE_DEFINITIONS
-        string "add custom compile definitions"
-        help
-            add custom compile defitions to this specific target
-endmenu #Toolchain
-
-config BOARD_TESTING
-    bool "Testing"
-    select SYSTEMCMDS_TESTS
-    help
-        flag to enable automatic inclusion of PX4 testing modules
-
-
-config BOARD_ETHERNET
-    bool "Ethernet"
-    help
-        flag to indicate that ethernet is enabled
-
-config BOARD_CRYPTO
-    bool "Crypto support"
-    help
-        Enable PX4 Crypto Support. Select the implementation under drivers
-
-config BOARD_PROTECTED
-    bool "Memory protection"
-    help
-        Enable memory protection via MPU/MMU
-
-menu "Serial ports"
-
-    config BOARD_SERIAL_URT6
-        string "URT6 tty port"
-
-    config BOARD_SERIAL_GPS1
-        string "GPS1 tty port"
-
-    config BOARD_SERIAL_GPS2
-        string "GPS2 tty port"
-
-    config BOARD_SERIAL_GPS3
-        string "GPS3 tty port"
-
-    config BOARD_SERIAL_GPS4
-        string "GPS4 tty port"
-
-    config BOARD_SERIAL_GPS5
-        string "GPS5 tty port"
-
-    config BOARD_SERIAL_TEL1
-        string "TEL1 tty port"
-
-    config BOARD_SERIAL_TEL2
-        string "TEL2 tty port"
-
-    config BOARD_SERIAL_TEL3
-        string "TEL3 tty port"
-
-    config BOARD_SERIAL_TEL4
-        string "TEL4 tty port"
-
-    config BOARD_SERIAL_TEL5
-        string "TEL5 tty port"
-
-    config BOARD_SERIAL_RC
-        string "RC tty port"
-
-    config BOARD_SERIAL_WIFI
-        string "WIFI tty port"
-
-    config BOARD_SERIAL_PPB
-        string "PPB (Pixhawk Payload Bus) tty port"
-endmenu
-
-menu "drivers"
-source "src/drivers/Kconfig"
-endmenu
-
-menu "modules"
-source "src/modules/Kconfig"
-endmenu
-
-menu "systemcmds"
-source "src/systemcmds/Kconfig"
-endmenu
-
-menu "examples"
-source "src/examples/Kconfig"
-endmenu

LICENSE

@@ -1,6 +1,6 @@
 BSD 3-Clause License
 
-Copyright (c) 2012 - 2022, PX4 Development Team
+Copyright (c) 2012 - 2021, PX4 Development Team
 All rights reserved.
 
 Redistribution and use in source and binary forms, with or without

Makefile

@@ -63,7 +63,7 @@ all: px4_sitl_default
 space := $(subst ,, )
 
 define make_list
-     $(shell [ -f .github/workflows/compile_${1}.yml ] && cat .github/workflows/compile_${1}.yml | sed -E 's|[[:space:]]+(.*),|check_\1|g' | grep check_${2})
+     $(shell cat .github/workflows/compile_${1}.yml | sed -E 's|[[:space:]]+(.*),|check_\1|g' | grep check_${2})
 endef
 
 # Parsing
@@ -129,22 +129,6 @@ else
 	BUILD_DIR_SUFFIX :=
 endif
 
-ifdef PX4_RESTRICTED_BUILD
-	CMAKE_ARGS += -DPX4_RESTRICTED_BUILD=ON
-	BUILD_DIR_SUFFIX := $(BUILD_DIR_SUFFIX)_restricted
-endif
-
-# pass the PX4_EXPORT_CONTROLLED_BUILD on to CMAKE_ARGS, and set it to 0 (OFF) by default
-PX4_EXPORT_CONTROLLED_BUILD ?= 0
-ifeq ($(PX4_EXPORT_CONTROLLED_BUILD),1)
-	CMAKE_ARGS += -DPX4_EXPORT_CONTROLLED_BUILD=ON
-	BUILD_DIR_SUFFIX := $(BUILD_DIR_SUFFIX)_export_controlled
-else ifeq ($(PX4_EXPORT_CONTROLLED_BUILD),0)
-	CMAKE_ARGS += -DPX4_EXPORT_CONTROLLED_BUILD=OFF
-else
-        $(error ERROR: Invalid value of flag PX4_EXPORT_CONTROLLED_BUILD, has to be '0' or '1')
-endif
-
 # additional config parameters passed to cmake
 ifdef EXTERNAL_MODULES_LOCATION
 	CMAKE_ARGS += -DEXTERNAL_MODULES_LOCATION:STRING=$(EXTERNAL_MODULES_LOCATION)
@@ -174,11 +158,6 @@ else
 		CMAKE_ARGS += -DCMAKE_BUILD_TYPE=UndefinedBehaviorSanitizer
 	endif
 
-	# Fuzz Testing
-	ifdef PX4_FUZZ
-		CMAKE_ARGS += -DCMAKE_BUILD_TYPE=FuzzTesting
-	endif
-
 endif
 
 # Pick up specific Python path if set
@@ -186,16 +165,10 @@ ifdef PYTHON_EXECUTABLE
 	CMAKE_ARGS += -DPYTHON_EXECUTABLE=${PYTHON_EXECUTABLE}
 endif
 
-# Check if the microRTPS agent is to be built
-ifdef BUILD_MICRORTPS_AGENT
-  CMAKE_ARGS += -DBUILD_MICRORTPS_AGENT=ON
-endif
-
 # Functions
 # --------------------------------------------------------------------
 # describe how to build a cmake config
 define cmake-build
-	$(eval CMAKE_ARGS += -DCONFIG=$(1))
 	@$(eval BUILD_DIR = "$(SRC_DIR)/build/$(1)")
 	@# check if the desired cmake configuration matches the cache then CMAKE_CACHE_CHECK stays empty
 	@$(call cmake-cache-check)
@@ -234,8 +207,8 @@ define colorecho
 +@echo -e '${COLOR_BLUE}${1} ${NO_COLOR}'
 endef
 
-# Get a list of all config targets boards/*/*.px4board
+# Get a list of all config targets boards/*/*.cmake
-ALL_CONFIG_TARGETS := $(shell find boards -maxdepth 3 -mindepth 3 -name '*.px4board' -print | sed -e 's|boards\/||' | sed -e 's|\.px4board||' | sed -e 's|\/|_|g' | sort)
+ALL_CONFIG_TARGETS := $(shell find boards -maxdepth 3 -mindepth 3 ! -name '*common*' ! -name '*sdflight*' -name '*.cmake' -print | sed -e 's|boards\/||' | sed -e 's|\.cmake||' | sed -e 's|\/|_|g' | sort)
 
 # ADD CONFIGS HERE
 # --------------------------------------------------------------------
@@ -243,33 +216,38 @@ ALL_CONFIG_TARGETS := $(shell find boards -maxdepth 3 -mindepth 3 -name '*.px4bo
 
 # All targets.
 $(ALL_CONFIG_TARGETS):
-	@$(call cmake-build,$@$(BUILD_DIR_SUFFIX))
+	@$(eval PX4_CONFIG = $@)
+	@$(eval CMAKE_ARGS += -DCONFIG=$(PX4_CONFIG))
+	@$(call cmake-build,$(PX4_CONFIG)$(BUILD_DIR_SUFFIX))
 
 # Filter for only default targets to allow omiting the "_default" postfix
 CONFIG_TARGETS_DEFAULT := $(patsubst %_default,%,$(filter %_default,$(ALL_CONFIG_TARGETS)))
 $(CONFIG_TARGETS_DEFAULT):
-	@$(call cmake-build,$@_default$(BUILD_DIR_SUFFIX))
+	@$(eval PX4_CONFIG = $@_default)
+	@$(eval CMAKE_ARGS += -DCONFIG=$(PX4_CONFIG))
+	@$(call cmake-build,$(PX4_CONFIG)$(BUILD_DIR_SUFFIX))
 
 all_config_targets: $(ALL_CONFIG_TARGETS)
 all_default_targets: $(CONFIG_TARGETS_DEFAULT)
 
-updateconfig:
-	@./Tools/kconfig/updateconfig.py
-
 # board reorganization deprecation warnings (2018-11-22)
 define deprecation_warning
 	$(warning $(1) has been deprecated and will be removed, please use $(2)!)
 endef
 
-skynode:
-	$(MAKE) px4_fmu-v5x $(ARGS)
-
-skynode_rtps:
-	$(MAKE) px4_fmu-v5x_rtps $(ARGS)
-
 # All targets with just dependencies but no recipe must either be marked as phony (or have the special @: as recipe).
 .PHONY: all px4_sitl_default all_config_targets all_default_targets
 
+# Multi- config targets.
+eagle_default: atlflight_eagle_default atlflight_eagle_qurt
+eagle_rtps: atlflight_eagle_rtps atlflight_eagle_qurt-rtps
+
+excelsior_default: atlflight_excelsior_default atlflight_excelsior_qurt
+excelsior_rtps: atlflight_excelsior_rtps atlflight_excelsior_qurt-rtps
+
+.PHONY: eagle_default eagle_rtps
+.PHONY: excelsior_default excelsior_rtps
+
 # Other targets
 # --------------------------------------------------------------------
 
@@ -296,6 +274,7 @@ misc_qgc_extra_firmware: \
 	check_bitcraze_crazyflie_default \
 	check_bitcraze_crazyflie21_default \
 	check_airmind_mindpx-v2_default \
+	check_px4_fmu-v2_lpe \
 	sizes
 
 # builds with RTPS
@@ -323,40 +302,12 @@ check_%:
 	@$(MAKE) --no-print-directory $(subst check_,,$@)
 	@echo
 
-all_variants_%:
-	@echo 'Building all $(subst all_variants_,,$@) variants:'  $(filter $(subst all_variants_,,$@)_%, $(ALL_CONFIG_TARGETS))
-	@echo
-	$(foreach a,$(filter $(subst all_variants_,,$@)_%, $(ALL_CONFIG_TARGETS)), $(call cmake-build,$(a)$(BUILD_DIR_SUFFIX)))
-
 uorb_graphs:
-	@./Tools/uorb_graph/create.py --src-path src --exclude-path src/examples --exclude-path src/lib/parameters --merge-depends --file Tools/uorb_graph/graph_full
+	@./Tools/uorb_graph/create.py --src-path src --exclude-path src/examples --exclude-path src/lib --file Tools/uorb_graph/graph_full
-	@./Tools/uorb_graph/create.py --src-path src --exclude-path src/examples --exclude-path src/lib/parameters --exclude-path src/modules/mavlink --merge-depends --file Tools/uorb_graph/graph_full_no_mavlink
 	@$(MAKE) --no-print-directory px4_fmu-v2_default uorb_graph
 	@$(MAKE) --no-print-directory px4_fmu-v4_default uorb_graph
-	@$(MAKE) --no-print-directory px4_fmu-v5_default uorb_graph
 	@$(MAKE) --no-print-directory px4_sitl_default uorb_graph
 
-px4io_update:
-	@$(MAKE) --no-print-directory px4_io-v2_default
-	@$(MAKE) --no-print-directory cubepilot_io-v2_default
-	# px4_io-v2_default
-	cp build/px4_io-v2_default/px4_io-v2_default.bin boards/holybro/durandal-v1/extras/px4_io-v2_default.bin
-	cp build/px4_io-v2_default/px4_io-v2_default.bin boards/holybro/pix32v5/extras/px4_io-v2_default.bin
-	cp build/px4_io-v2_default/px4_io-v2_default.bin boards/mro/x21-777/extras/px4_io-v2_default.bin
-	cp build/px4_io-v2_default/px4_io-v2_default.bin boards/px4/fmu-v2/extras/px4_io-v2_default.bin
-	cp build/px4_io-v2_default/px4_io-v2_default.bin boards/px4/fmu-v3/extras/px4_io-v2_default.bin
-	cp build/px4_io-v2_default/px4_io-v2_default.bin boards/px4/fmu-v4pro/extras/px4_io-v2_default.bin
-	cp build/px4_io-v2_default/px4_io-v2_default.bin boards/px4/fmu-v5/extras/px4_io-v2_default.bin
-	cp build/px4_io-v2_default/px4_io-v2_default.bin boards/px4/fmu-v5x/extras/px4_io-v2_default.bin
-	cp build/px4_io-v2_default/px4_io-v2_default.bin boards/px4/fmu-v6x/extras/px4_io-v2_default.bin
-	cp build/px4_io-v2_default/px4_io-v2_default.bin boards/px4/fmu-v6c/extras/px4_io-v2_default.bin
-	# cubepilot_io-v2_default
-	cp build/cubepilot_io-v2_default/cubepilot_io-v2_default.bin boards/cubepilot/cubeorange/extras/cubepilot_io-v2_default.bin
-	cp build/cubepilot_io-v2_default/cubepilot_io-v2_default.bin boards/cubepilot/cubeyellow/extras/cubepilot_io-v2_default.bin
-	git status
-
-bootloaders_update: cuav_nora_bootloader cuav_x7pro_bootloader cubepilot_cubeorange_bootloader holybro_durandal-v1_bootloader holybro_kakuteh7_bootloader matek_h743_bootloader matek_h743-mini_bootloader matek_h743-slim_bootloader modalai_fc-v2_bootloader mro_ctrl-zero-classic_bootloader mro_ctrl-zero-h7_bootloader mro_ctrl-zero-h7-oem_bootloader mro_pixracerpro_bootloader px4_fmu-v6c_bootloader px4_fmu-v6u_bootloader px4_fmu-v6x_bootloader
-	git status
 
 .PHONY: coverity_scan
 
@@ -364,21 +315,18 @@ coverity_scan: px4_sitl_default
 
 # Documentation
 # --------------------------------------------------------------------
-.PHONY: parameters_metadata airframe_metadata module_documentation extract_events px4_metadata doxygen
+.PHONY: parameters_metadata airframe_metadata module_documentation px4_metadata doxygen
 
 parameters_metadata:
 	@$(MAKE) --no-print-directory px4_sitl_default metadata_parameters ver_gen
 
 airframe_metadata:
-	@$(MAKE) --no-print-directory px4_sitl_default metadata_airframes ver_gen
+	@$(MAKE) --no-print-directory px4_sitl_default metadata_airframes
 
 module_documentation:
 	@$(MAKE) --no-print-directory px4_sitl_default metadata_module_documentation
 
-extract_events:
+px4_metadata: parameters_metadata airframe_metadata module_documentation
-	@$(MAKE) --no-print-directory px4_sitl_default metadata_extract_events ver_gen
-
-px4_metadata: parameters_metadata airframe_metadata module_documentation extract_events
 
 doxygen:
 	@mkdir -p "$(SRC_DIR)"/build/doxygen
@@ -405,6 +353,7 @@ format:
 .PHONY: rostest python_coverage
 
 tests:
+	$(eval CMAKE_ARGS += -DCONFIG=px4_sitl_test)
 	$(eval CMAKE_ARGS += -DTESTFILTER=$(TESTFILTER))
 	$(eval ARGS += test_results)
 	$(eval ASAN_OPTIONS += color=always:check_initialization_order=1:detect_stack_use_after_return=1)
@@ -512,39 +461,35 @@ shellcheck_all:
 	@make px4_fmu-v5_default shellcheck
 
 validate_module_configs:
-	@find "$(SRC_DIR)"/src/modules "$(SRC_DIR)"/src/drivers "$(SRC_DIR)"/src/lib -name *.yaml -type f \
+	@find "$(SRC_DIR)"/src/modules "$(SRC_DIR)"/src/drivers "$(SRC_DIR)"/src/lib -name *.yaml -type f -print0 | xargs -0 "$(SRC_DIR)"/Tools/validate_yaml.py --schema-file "$(SRC_DIR)"/validation/module_schema.yaml
-	-not -path "$(SRC_DIR)/src/lib/mixer_module/*" -not -path "$(SRC_DIR)/src/lib/crypto/libtommath/*" -print0 | \
-	xargs -0 "$(SRC_DIR)"/Tools/validate_yaml.py --schema-file "$(SRC_DIR)"/validation/module_schema.yaml
 
 # Cleanup
 # --------------------------------------------------------------------
 .PHONY: clean submodulesclean submodulesupdate gazeboclean distclean
 
 clean:
-	@[ ! -d "$(SRC_DIR)/build" ] || find "$(SRC_DIR)/build" -mindepth 1 -maxdepth 1 -type d -exec sh -c "echo {}; cmake --build {} -- clean || rm -rf {}" \; # use generated build system to clean, wipe build directory if it fails
+	@rm -rf "$(SRC_DIR)"/build
-	@git submodule foreach git clean -dX --force # some submodules generate build artifacts in source
+	@git submodule foreach git clean -df
 
 submodulesclean:
 	@git submodule foreach --quiet --recursive git clean -ff -x -d
 	@git submodule update --quiet --init --recursive --force || true
 	@git submodule sync --recursive
-	@git submodule update --init --recursive --force --jobs 4
+	@git submodule update --init --recursive --force
 
 submodulesupdate:
-	@git submodule update --quiet --init --recursive --jobs 4 || true
+	@git submodule update --quiet --init --recursive || true
 	@git submodule sync --recursive
-	@git submodule update --init --recursive --jobs 4
+	@git submodule update --init --recursive
-	@git fetch --all --tags --recurse-submodules=yes --jobs=4
 
 gazeboclean:
 	@rm -rf ~/.gazebo/*
 
 distclean: gazeboclean
-	@git submodule deinit --force $(SRC_DIR)
+	@git submodule deinit -f .
-	@rm -rf "$(SRC_DIR)/build"
+	@git clean -ff -x -d -e ".cproject" -e ".idea" -e ".project" -e ".settings" -e ".vscode"
-	@git clean --force -X "$(SRC_DIR)/msg/" "$(SRC_DIR)/platforms/" "$(SRC_DIR)/posix-configs/" "$(SRC_DIR)/ROMFS/" "$(SRC_DIR)/src/" "$(SRC_DIR)/test/" "$(SRC_DIR)/Tools/"
 
-# Help / Error / Misc
+# Help / Error
 # --------------------------------------------------------------------
 
 # All other targets are handled by PX4_MAKE. Add a rule here to avoid printing an error.
@@ -558,7 +503,7 @@ help:
 	@echo "Where <target> is one of:"
 	@$(MAKE) -pRrq -f $(lastword $(MAKEFILE_LIST)) : 2>/dev/null | \
 		awk -v RS= -F: '/^# File/,/^# Finished Make data base/ {if ($$1 !~ "^[#.]") {print $$1}}' | sort | \
-		egrep -v -e '^[^[:alnum:]]' -e '^($(subst $(space),|,$(ALL_CONFIG_TARGETS)))$$' -e '_default$$' -e '^(Makefile)'
+		egrep -v -e '^[^[:alnum:]]' -e '^($(subst $(space),|,$(ALL_CONFIG_TARGETS)))$$' -e '_default$$' -e '^(posix|eagle|Makefile)'
 	@echo
 	@echo "Or, $(MAKE) <config_target> [<make_target(s)>]"
 	@echo "Use '$(MAKE) list_config_targets' for a list of configuration targets."
@@ -578,18 +523,3 @@ check_px4: $(call make_list,nuttx,"px4") \
 
 check_nxp: $(call make_list,nuttx,"nxp") \
 	sizes
-
-ifneq ($(ROS2_WS_DIR),)
-  ROS2_WS_DIR := $(basename ${ROS2_WS_DIR})
-else
-  ROS2_WS_DIR := ~/colcon_ws
-endif
-
-update_ros2_bridge:
-	@Tools/update_px4_ros2_bridge.sh --ws_dir ${ROS2_WS_DIR} --all
-
-update_px4_ros_com:
-	@Tools/update_px4_ros2_bridge.sh --ws_dir ${ROS2_WS_DIR} --px4_ros_com
-
-update_px4_msgs:
-	@Tools/update_px4_ros2_bridge.sh --ws_dir ${ROS2_WS_DIR} --px4_msgs

PULL_REQUEST_TEMPLATE.md

@@ -0,0 +1,17 @@
+Please use [PX4 Discuss](http://discuss.px4.io/) or [Slack](http://slack.px4.io/) to align on pull requests if necessary. You can then open draft pull requests to get early feedback.
+
+**Describe problem solved by this pull request**
+A clear and concise description of the problem this proposed change will solve.
+E.g. For this use case I ran into...
+
+**Describe your solution**
+A clear and concise description of what you have implemented.
+
+**Describe possible alternatives**
+A clear and concise description of alternative solutions or features you've considered.
+
+**Test data / coverage**
+How was it tested? What cases were covered? Logs uploaded to https://review.px4.io/ and screenshots of the important plot parts.
+
+**Additional context**
+Add any other related context or media.

README.md

@@ -4,11 +4,11 @@
 
 [![Nuttx Targets](https://github.com/PX4/PX4-Autopilot/workflows/Nuttx%20Targets/badge.svg)](https://github.com/PX4/PX4-Autopilot/actions?query=workflow%3A%22Nuttx+Targets%22?branch=master) [![SITL Tests](https://github.com/PX4/PX4-Autopilot/workflows/SITL%20Tests/badge.svg?branch=master)](https://github.com/PX4/PX4-Autopilot/actions?query=workflow%3A%22SITL+Tests%22)
 
-[![Slack](/.github/slack.svg)](https://join.slack.com/t/px4/shared_invite/zt-si4xo5qs-R4baYFmMjlrT4rQK5yUnaA)
+[![Slack](https://px4-slack.herokuapp.com/badge.svg)](http://slack.px4.io)
 
 This repository holds the [PX4](http://px4.io) flight control solution for drones, with the main applications located in the [src/modules](https://github.com/PX4/PX4-Autopilot/tree/master/src/modules) directory. It also contains the PX4 Drone Middleware Platform, which provides drivers and middleware to run drones.
 
-PX4 is highly portable, OS-independent and supports Linux, NuttX and MacOS out of the box.
+PX4 is highly portable, OS-independent and supports Linux, NuttX and QuRT out of the box.
 
 * Official Website: http://px4.io (License: BSD 3-clause, [LICENSE](https://github.com/PX4/PX4-Autopilot/blob/master/LICENSE))
 * [Supported airframes](https://docs.px4.io/master/en/airframes/airframe_reference.html) ([portfolio](http://px4.io/#airframes)):
@@ -110,7 +110,7 @@ This repository contains code supporting Pixhawk standard boards (best supported
   * [Hex Cube Yellow](https://docs.px4.io/master/en/flight_controller/cubepilot_cube_yellow.html)
   * [Airmind MindPX V2.8](http://www.mindpx.net/assets/accessories/UserGuide_MindPX.pdf)
   * [Airmind MindRacer V1.2](http://mindpx.net/assets/accessories/mindracer_user_guide_v1.2.pdf)
-  * [Bitcraze Crazyflie 2.0](https://docs.px4.io/master/en/complete_vehicles/crazyflie2.html)
+  * [Bitcraze Crazyflie 2.0](https://docs.px4.io/master/en/flight_controller/crazyflie2.html)
   * [Omnibus F4 SD](https://docs.px4.io/master/en/flight_controller/omnibus_f4_sd.html)
   * [Holybro Kakute F7](https://docs.px4.io/master/en/flight_controller/kakutef7.html)
   * [Raspberry PI with Navio 2](https://docs.px4.io/master/en/flight_controller/raspberry_pi_navio2.html)

ROMFS/CMakeLists.txt

@@ -115,12 +115,10 @@ add_custom_command(
 set(romfs_extract_stamp ${CMAKE_CURRENT_BINARY_DIR}/romfs_extract.stamp)
 add_custom_command(
 	OUTPUT ${romfs_extract_stamp}
-	COMMAND ${CMAKE_COMMAND} -E remove_directory ${romfs_gen_root_dir}/*
 	COMMAND ${CMAKE_COMMAND} -E tar xf ${romfs_tar_file}
 	COMMAND ${CMAKE_COMMAND} -E touch ${romfs_extract_stamp}
 	WORKING_DIRECTORY ${romfs_gen_root_dir}
 	DEPENDS ${romfs_tar_file}
-	VERBATIM
 	)
 
 add_custom_command(
@@ -143,14 +141,38 @@ add_custom_command(
 	COMMENT "ROMFS: copying, generating airframes"
 	)
 
-if(EXISTS ${PX4_BOARD_DIR}/extras/${PX4_BOARD_VENDOR}_${PX4_BOARD_MODEL}_bootloader.bin)
-	set(BOARD_FIRMWARE_BIN "${PX4_BOARD_VENDOR}_${PX4_BOARD_MODEL}_bootloader.bin")
-	configure_file(${PX4_SOURCE_DIR}/platforms/nuttx/init/rc.board_bootloader_upgrade.in ${romfs_gen_root_dir}/init.d/rc.board_bootloader_upgrade @ONLY)
-endif()
-
 # copy extras into ROMFS
 set(extras_dependencies)
 
+# copy px4io binary if configured
+if(config_io_board)
+	list(APPEND extras_dependencies
+		copy_px4io_bin
+		${fw_io_bin}
+	)
+	file(RELATIVE_PATH iofw_file_relative ${PX4_SOURCE_DIR} ${fw_io_bin})
+	message(STATUS "ROMFS:  Adding ${iofw_file_relative} -> /etc/extras/${config_io_board}.bin")
+endif()
+
+
+# board bootloader (built or included)
+if(TARGET copy_bootloader_bin)
+
+	if(board_bootloader_firmware)
+		file(RELATIVE_PATH bl_file_relative ${PX4_SOURCE_DIR} ${board_bootloader_firmware})
+		message(STATUS "ROMFS:  Adding ${bl_file_relative} -> /etc/extras/bootloader.bin")
+	else()
+		file(RELATIVE_PATH bl_file_relative ${PX4_SOURCE_DIR} ${bootloader_bin})
+		message(STATUS "ROMFS:  Adding ${bl_file_relative} -> /etc/extras/bootloader.bin")
+	endif()
+
+	list(APPEND extras_dependencies
+		copy_bootloader_bin
+		${bootloader_bin}
+	)
+endif()
+
+
 # optional board architecture defaults
 set(board_arch_rc_file "rc.board_arch_defaults")
 if(EXISTS "${PX4_SOURCE_DIR}/platforms/${PX4_PLATFORM}/init/${CONFIG_ARCH_CHIP}/${board_arch_rc_file}")
@@ -175,7 +197,6 @@ if(EXISTS "${PX4_SOURCE_DIR}/platforms/${PX4_PLATFORM}/init/${CONFIG_ARCH_CHIP}/
 endif()
 
 
-# board custom init files
 set(OPTIONAL_BOARD_RC)
 list(APPEND OPTIONAL_BOARD_RC
 	rc.board_defaults
@@ -210,59 +231,21 @@ foreach(board_rc_file ${OPTIONAL_BOARD_RC})
 endforeach()
 
 
-# board extras
-set(OPTIONAL_BOARD_EXTRAS)
-file(GLOB OPTIONAL_BOARD_EXTRAS ${PX4_BOARD_DIR}/extras/*)
-
-foreach(board_extra_file ${OPTIONAL_BOARD_EXTRAS})
-
-	if(EXISTS "${board_extra_file}")
-		file(RELATIVE_PATH extra_file_base_name ${PX4_BOARD_DIR}/extras/ ${board_extra_file})
-		file(RELATIVE_PATH extra_file_relative_source ${PX4_SOURCE_DIR} ${board_extra_file})
-		message(STATUS "ROMFS:  Adding ${extra_file_relative_source} -> /etc/extras/${extra_file_base_name}")
-
-		add_custom_command(
-			OUTPUT
-				${romfs_gen_root_dir}/extras/${extra_file_base_name}
-				${extra_file_base_name}.stamp
-			COMMAND ${CMAKE_COMMAND} -E copy_if_different ${PX4_BOARD_DIR}/extras/${extra_file_base_name} ${romfs_gen_root_dir}/extras/${extra_file_base_name}
-			COMMAND ${CMAKE_COMMAND} -E touch ${extra_file_base_name}.stamp
-			DEPENDS
-				${board_extra_file}
-				romfs_copy.stamp
-			COMMENT "ROMFS: copying ${board_extra_file}"
-		)
-
-		list(APPEND extras_dependencies
-			${extra_file_base_name}.stamp
-		)
-	endif()
-
-endforeach()
-
-
-
 if(config_uavcan_peripheral_firmware)
 
 	include(ExternalProject)
 
 	foreach(uavcan_peripheral_config ${config_uavcan_peripheral_firmware})
-		# include the UAVCAN peripheral binaries in ROMFS
+		# include the px4io binary in ROMFS
 		message(STATUS "ROMFS:  Adding UAVCAN peripheral ${uavcan_peripheral_config} -> /etc/uavcan/fw/")
-
-		# ExternalProject_Add() with GIT_SUBMODULES "" initializes no submodules.
-		cmake_policy(SET CMP0097 NEW)
-
-		include(ExternalProject)
-
 		ExternalProject_Add(build_${uavcan_peripheral_config}
-			GIT_REPOSITORY ${CMAKE_SOURCE_DIR}
+			SOURCE_DIR ${CMAKE_SOURCE_DIR}
-			GIT_TAG ${PX4_GIT_TAG}
+			DOWNLOAD_COMMAND ""
-			GIT_SUBMODULES ""
+			UPDATE_COMMAND ""
-			DOWNLOAD_NO_PROGRESS true
 			CMAKE_ARGS -DCONFIG=${uavcan_peripheral_config}
 			INSTALL_COMMAND ""
 			USES_TERMINAL_BUILD true
+			DEPENDS git_nuttx git_nuttx_apps
 			BUILD_ALWAYS 1
 		)
 

ROMFS/cannode/init.d/rcS

@@ -15,6 +15,15 @@ set +e
 #
 #------------------------------------------------------------------------------
 set R /
+#
+# Mount the procfs.
+#
+mount -t procfs /proc
+
+#
+# Start CDC/ACM serial driver.
+#
+sercon
 
 #
 # Print full system version.
@@ -88,7 +97,7 @@ unset BOARD_RC_SENSORS
 # Check for flow sensor
 if param compare SENS_EN_PX4FLOW 1
 then
-	px4flow start -X &
+	px4flow start -X
 fi
 
 uavcannode start

ROMFS/px4fmu_common/init.d-posix/CMakeLists.txt

@@ -34,10 +34,9 @@
 add_subdirectory(airframes)
 
 px4_add_romfs_files(
-	px4-rc.mavlink
 	px4-rc.params
-	px4-rc.rtps
 	px4-rc.simulator
+	px4-rc.mavlink
 	rc.replay
 	rcS
 )

ROMFS/px4fmu_common/init.d-posix/airframes/10017_iris_ctrlalloc

@@ -8,30 +8,41 @@
 #
 
 . ${R}etc/init.d/rc.mc_defaults
+. ${R}etc/init.d/rc.ctrlalloc
 
-param set-default SYS_CTRL_ALLOC 1
+param set-default MPC_USE_HTE 0
 
+param set-default VM_MASS 1.5
+param set-default VM_INERTIA_XX 0.03
+param set-default VM_INERTIA_YY 0.03
+param set-default VM_INERTIA_ZZ 0.05
 
 param set-default CA_AIRFRAME 0
+param set-default CA_METHOD 1
+param set-default CA_ACT0_MIN 0.0
+param set-default CA_ACT1_MIN 0.0
+param set-default CA_ACT2_MIN 0.0
+param set-default CA_ACT3_MIN 0.0
+param set-default CA_ACT0_MAX 1.0
+param set-default CA_ACT1_MAX 1.0
+param set-default CA_ACT2_MAX 1.0
+param set-default CA_ACT3_MAX 1.0
 
-param set-default CA_ROTOR_COUNT 4
+param set-default CA_MC_R0_PX 0.1515
-param set-default CA_ROTOR0_PX 0.1515
+param set-default CA_MC_R0_PY 0.245
-param set-default CA_ROTOR0_PY 0.245
+param set-default CA_MC_R0_CT 6.5
-param set-default CA_ROTOR0_KM 0.05
+param set-default CA_MC_R0_KM 0.05
-param set-default CA_ROTOR1_PX -0.1515
+param set-default CA_MC_R1_PX -0.1515
-param set-default CA_ROTOR1_PY -0.1875
+param set-default CA_MC_R1_PY -0.1875
-param set-default CA_ROTOR1_KM 0.05
+param set-default CA_MC_R1_CT 6.5
-param set-default CA_ROTOR2_PX 0.1515
+param set-default CA_MC_R1_KM 0.05
-param set-default CA_ROTOR2_PY -0.245
+param set-default CA_MC_R2_PX 0.1515
-param set-default CA_ROTOR2_KM -0.05
+param set-default CA_MC_R2_PY -0.245
-param set-default CA_ROTOR3_PX -0.1515
+param set-default CA_MC_R2_CT 6.5
-param set-default CA_ROTOR3_PY 0.1875
+param set-default CA_MC_R2_KM -0.05
-param set-default CA_ROTOR3_KM -0.05
+param set-default CA_MC_R3_PX -0.1515
+param set-default CA_MC_R3_PY 0.1875
+param set-default CA_MC_R3_CT 6.5
+param set-default CA_MC_R3_KM -0.05
 
-param set-default PWM_MAIN_FUNC1 101
+set MIXER direct
-param set-default PWM_MAIN_FUNC2 102
-param set-default PWM_MAIN_FUNC3 103
-param set-default PWM_MAIN_FUNC4 104
-
-set MIXER skip
-set MIXER_AUX none

ROMFS/px4fmu_common/init.d-posix/airframes/10018_iris_foggy_lidar

@@ -7,5 +7,6 @@
 
 . ${R}etc/init.d-posix/airframes/10016_iris
 
+param set-default EKF2_RNG_AID 1
 param set-default EKF2_RNG_A_HMAX 10
 

ROMFS/px4fmu_common/init.d-posix/airframes/10019_omnicopter

@@ -1,101 +0,0 @@
-#!/bin/sh
-#
-# @name 6DoF Omnicopter SITL
-#
-# @type Quadrotor Wide
-#
-# @maintainer Jaeyoung Lim <jalim@ethz.ch>
-#
-
-. ${R}etc/init.d/rc.mc_defaults
-
-param set-default SYS_CTRL_ALLOC 1
-
-
-param set-default CA_AIRFRAME 0
-
-param set-default CA_ROTOR_COUNT 8
-param set-default CA_R_REV 255
-
-param set-default CA_ROTOR0_PX 0.14435
-param set-default CA_ROTOR0_PY -0.14435
-param set-default CA_ROTOR0_PZ -0.14435
-param set-default CA_ROTOR0_KM 0.05 # CCW
-param set-default CA_ROTOR0_AX -0.788675
-param set-default CA_ROTOR0_AY -0.211325
-param set-default CA_ROTOR0_AZ -0.57735
-
-param set-default CA_ROTOR1_PX -0.14435
-param set-default CA_ROTOR1_PY -0.14435
-param set-default CA_ROTOR1_PZ -0.14435
-param set-default CA_ROTOR1_KM 0.05
-param set-default CA_ROTOR1_AX 0.211325
-param set-default CA_ROTOR1_AY -0.788675
-param set-default CA_ROTOR1_AZ 0.57735
-
-param set-default CA_ROTOR2_PX 0.14435
-param set-default CA_ROTOR2_PY 0.14435
-param set-default CA_ROTOR2_PZ -0.14435
-param set-default CA_ROTOR2_KM 0.05
-param set-default CA_ROTOR2_AX -0.211325
-param set-default CA_ROTOR2_AY 0.788675
-param set-default CA_ROTOR2_AZ 0.57735
-
-param set-default CA_ROTOR3_PX -0.14435
-param set-default CA_ROTOR3_PY 0.14435
-param set-default CA_ROTOR3_PZ -0.14435
-param set-default CA_ROTOR3_KM 0.05
-param set-default CA_ROTOR3_AX 0.788675
-param set-default CA_ROTOR3_AY 0.211325
-param set-default CA_ROTOR3_AZ -0.57735
-
-param set-default CA_ROTOR4_PX 0.14435
-param set-default CA_ROTOR4_PY -0.14435
-param set-default CA_ROTOR4_PZ 0.14435
-param set-default CA_ROTOR4_KM 0.05
-param set-default CA_ROTOR4_AX 0.788675
-param set-default CA_ROTOR4_AY 0.211325
-param set-default CA_ROTOR4_AZ -0.57735
-
-param set-default CA_ROTOR5_PX -0.14435
-param set-default CA_ROTOR5_PY -0.14435
-param set-default CA_ROTOR5_PZ 0.14435
-param set-default CA_ROTOR5_KM 0.05
-param set-default CA_ROTOR5_AX -0.211325
-param set-default CA_ROTOR5_AY 0.788675
-param set-default CA_ROTOR5_AZ 0.57735
-
-param set-default CA_ROTOR6_PX 0.14435
-param set-default CA_ROTOR6_PY 0.14435
-param set-default CA_ROTOR6_PZ 0.14435
-param set-default CA_ROTOR6_KM 0.05
-param set-default CA_ROTOR6_AX 0.211325
-param set-default CA_ROTOR6_AY -0.788675
-param set-default CA_ROTOR6_AZ 0.57735
-
-param set-default CA_ROTOR7_PX -0.14435
-param set-default CA_ROTOR7_PY 0.14435
-param set-default CA_ROTOR7_PZ 0.14435
-param set-default CA_ROTOR7_KM 0.05
-param set-default CA_ROTOR7_AX -0.788675
-param set-default CA_ROTOR7_AY -0.211325
-param set-default CA_ROTOR7_AZ -0.57735
-
-param set-default PWM_MAIN_FUNC1 101
-param set-default PWM_MAIN_FUNC2 102
-param set-default PWM_MAIN_FUNC3 103
-param set-default PWM_MAIN_FUNC4 104
-param set-default PWM_MAIN_FUNC5 105
-param set-default PWM_MAIN_FUNC6 106
-param set-default PWM_MAIN_FUNC7 107
-param set-default PWM_MAIN_FUNC8 108
-
-# disable MC desaturation which improves attitude tracking
-param set-default CA_METHOD 0
-
-# disable attitude failure detection
-param set-default FD_FAIL_P 0
-param set-default FD_FAIL_R 0
-
-set MIXER skip
-set MIXER_AUX none

ROMFS/px4fmu_common/init.d-posix/airframes/10028_quadrotor_x

@@ -1,12 +0,0 @@
-#!/bin/sh
-#
-# @name Quadrotor SITL model for JSBSim
-#
-# @type Quadrotor Wide
-#
-# @maintainer Jaeyoung Lim <jaeyoung@auterion.com>
-#
-
-. ${R}etc/init.d/rc.mc_defaults
-
-set MIXER quad_w

ROMFS/px4fmu_common/init.d-posix/airframes/10029_hexarotor_x

@@ -1,30 +0,0 @@
-#!/bin/sh
-#
-# @name Hexacopter SITL model for JSBSim
-#
-# @type Hexarotor x
-#
-# @maintainer Jaeyoung Lim <jaeyoung@auterion.com>
-#
-
-. ${R}etc/init.d/rc.mc_defaults
-
-param set-default MC_PITCHRATE_P 0.1
-param set-default MC_PITCHRATE_I 0.05
-param set-default MC_PITCH_P 6.0
-param set-default MC_ROLLRATE_P 0.15
-param set-default MC_ROLLRATE_I 0.1
-param set-default MC_ROLL_P 6.0
-param set-default MPC_XY_VEL_I_ACC 4
-param set-default MPC_XY_VEL_P_ACC 3
-
-param set-default RTL_DESCEND_ALT 10
-
-param set-default TRIG_INTERFACE 3
-param set-default TRIG_MODE 4
-param set-default MNT_MODE_IN 4
-param set-default MNT_DO_STAB 2
-
-param set-default MAV_TYPE 13
-
-set MIXER hexa_x

ROMFS/px4fmu_common/init.d-posix/airframes/10040_quadx

@@ -1,23 +0,0 @@
-#!/bin/sh
-#
-# @name QuadrotorX SITL for SIH
-#
-# @type Quadrotor
-#
-# @maintainer Romain Chiappinelli <romain.chiap@gmail.com>
-#
-
-. ${R}etc/init.d/rc.mc_defaults
-
-set MIXER quad_x
-
-# disable some checks to allow to fly:
-# - with usb
-param set-default CBRK_USB_CHK 197848
-# - without real battery
-param set-default CBRK_SUPPLY_CHK 894281
-# - without safety switch
-param set-default COM_PREARM_MODE 0
-param set-default CBRK_IO_SAFETY 22027
-
-param set SIH_VEHICLE_TYPE 0

ROMFS/px4fmu_common/init.d-posix/airframes/10041_airplane

@@ -1,33 +0,0 @@
-#!/bin/sh
-#
-# @name Plane SITL for SIH
-#
-# @type Plane
-#
-# @maintainer Romain Chiappinelli <romain.chiap@gmail.com>
-
-. ${R}etc/init.d/rc.fw_defaults
-
-set MIXER AERT
-
-# disable some checks to allow to fly:
-# - with usb
-param set-default CBRK_USB_CHK 197848
-# - without real battery
-param set-default CBRK_SUPPLY_CHK 894281
-# - without safety switch
-param set-default COM_PREARM_MODE 0
-param set-default CBRK_IO_SAFETY 22027
-
-param set-default BAT_N_CELLS 3
-
-param set SIH_T_MAX 6.0
-param set SIH_MASS 0.3
-param set SIH_IXX 0.00402
-param set SIH_IYY 0.0144
-param set SIH_IZZ 0.0177
-param set SIH_IXZ 0.00046
-param set SIH_KDV 0.2
-
-param set SIH_VEHICLE_TYPE 1 	# sih as fixed wing
-param set RWTO_TKOFF 1  # enable takeoff from runway (as opposed to launched)

ROMFS/px4fmu_common/init.d-posix/airframes/10042_xvert

@@ -1,45 +0,0 @@
-#!/bin/sh
-#
-# @name SIH Tailsitter Duo
-#
-# @type VTOL
-#
-# @maintainer Romain Chiappinelli <romain.chiap@gmail.com>
-
-. ${R}etc/init.d/rc.vtol_defaults
-
-param set-default VT_ELEV_MC_LOCK 0
-param set-default VT_TYPE 0
-param set-default VT_FW_DIFTHR_EN 1
-param set-default VT_FW_DIFTHR_SC 0.3
-param set-default MPC_MAN_Y_MAX 60
-param set-default MC_PITCH_P 5
-
-param set-default MAV_TYPE 19
-set MAV_TYPE 19
-set MIXER vtol_tailsitter_duo_sat
-
-# disable some checks to allow to fly:
-# - with usb
-param set-default CBRK_USB_CHK 197848
-# - without real battery
-param set-default CBRK_SUPPLY_CHK 894281
-# - without safety switch
-param set-default COM_PREARM_MODE 0
-param set-default CBRK_IO_SAFETY 22027
-
-param set-default BAT_N_CELLS 3
-
-param set SIH_T_MAX 2.0
-param set SIH_Q_MAX 0.0165
-param set SIH_MASS 0.2
-# IXX and IZZ are inverted from the thesis as the body frame is pitched by 90 deg
-param set SIH_IXX 0.00354
-param set SIH_IYY 0.000625
-param set SIH_IZZ 0.00300
-param set SIH_IXZ 0.0
-param set SIH_KDV 0.2
-param set SIH_L_ROLL 0.145
-
-# sih as tailsitter
-param set SIH_VEHICLE_TYPE 2

ROMFS/px4fmu_common/init.d-posix/airframes/1011_iris_irlock

@@ -10,7 +10,6 @@
 # enable fusion of landing target velocity
 param set-default LTEST_MODE 1
 param set-default PLD_HACC_RAD 0.1
-param set-default RTL_PLD_MD 2
 
 # Start up Landing Target Estimator module
 landing_target_estimator start

ROMFS/px4fmu_common/init.d-posix/airframes/1014_solo

@@ -8,6 +8,6 @@
 . ${R}etc/init.d/rc.mc_defaults
 
 param set-default MC_PITCHRATE_P 0.1
-param set-default MC_ROLLRATE_P 0.05
+param set-default MC_ROLLRATE_P 0.1
 
 set MIXER quad_x

ROMFS/px4fmu_common/init.d-posix/airframes/1016_iris_rtps

@@ -0,0 +1,8 @@
+#!/bin/sh
+#
+# @name 3DR Iris Quadrotor SITL (RTPS)
+#
+# @type Quadrotor Wide
+#
+
+. ${R}etc/init.d-posix/airframes/10016_iris

ROMFS/px4fmu_common/init.d-posix/airframes/1020_uuv_generic

@@ -5,8 +5,16 @@
 
 . ${R}etc/init.d/rc.uuv_defaults
 
+#Set data link loss failsafe mode (0: disabled)
+param set-default NAV_DLL_ACT 0
+
 # disable circuit breaker for airspeed sensor
 param set-default CBRK_AIRSPD_CHK 162128
 
+#param set CBRK_GPSFAIL 240024
+
+set MAV_TYPE 12
+param set MAV_TYPE ${MAV_TYPE}
+
 set MIXER_FILE etc/mixers-sitl/uuv_x_sitl.main.mix
 set MIXER custom

ROMFS/px4fmu_common/init.d-posix/airframes/1021_uuv_hippocampus

@@ -5,8 +5,16 @@
 
 . ${R}etc/init.d/rc.uuv_defaults
 
+#Set data link loss failsafe mode (0: disabled)
+param set-default NAV_DLL_ACT 0
+
 # disable circuit breaker for airspeed sensor
 param set-default CBRK_AIRSPD_CHK 162128
 
+#param set CBRK_GPSFAIL 240024
+
+set MAV_TYPE 12
+param set MAV_TYPE ${MAV_TYPE}
+
 set MIXER_FILE etc/mixers-sitl/uuv_x_sitl.main.mix
 set MIXER custom

ROMFS/px4fmu_common/init.d-posix/airframes/1022_uuv_bluerov2_heavy

@@ -5,65 +5,12 @@
 
 . ${R}etc/init.d/rc.uuv_defaults
 
+#Set data link loss failsafe mode (0: disabled)
+param set-default NAV_DLL_ACT 0
+
 # disable circuit breaker for airspeed sensor
 param set-default CBRK_AIRSPD_CHK 162128
 
-param set-default SYS_CTRL_ALLOC 1
+set PWM_OUT 12345678
-param set-default CA_AIRFRAME 7
+set MIXER_FILE etc/mixers-sitl/vectored6dof_sitl.main.mix
-
+set MIXER custom
-param set-default CA_ROTOR_COUNT 8
-param set-default CA_R_REV 255
-param set-default CA_ROTOR0_AX 1.0000
-param set-default CA_ROTOR0_AY -1.0000
-param set-default CA_ROTOR0_AZ 0.0000
-param set-default CA_ROTOR0_KM 0.0000
-param set-default CA_ROTOR0_PX 0.5000
-param set-default CA_ROTOR0_PY 0.3000
-param set-default CA_ROTOR0_PZ 0.2000
-param set-default CA_ROTOR1_AX 1.0000
-param set-default CA_ROTOR1_AY 1.0000
-param set-default CA_ROTOR1_AZ 0.0000
-param set-default CA_ROTOR1_KM 0.0000
-param set-default CA_ROTOR1_PX 0.5000
-param set-default CA_ROTOR1_PY -0.3000
-param set-default CA_ROTOR1_PZ 0.2000
-param set-default CA_ROTOR2_AX 1.0000
-param set-default CA_ROTOR2_AY 1.0000
-param set-default CA_ROTOR2_AZ 0.0000
-param set-default CA_ROTOR2_KM 0.0000
-param set-default CA_ROTOR2_PX -0.5000
-param set-default CA_ROTOR2_PY 0.3000
-param set-default CA_ROTOR2_PZ 0.2000
-param set-default CA_ROTOR3_AX 1.0000
-param set-default CA_ROTOR3_AY -1.0000
-param set-default CA_ROTOR3_AZ 0.0000
-param set-default CA_ROTOR3_KM 0.0000
-param set-default CA_ROTOR3_PX -0.5000
-param set-default CA_ROTOR3_PY -0.3000
-param set-default CA_ROTOR3_PZ 0.2000
-param set-default CA_ROTOR4_AZ -1.0000
-param set-default CA_ROTOR4_KM 0.0000
-param set-default CA_ROTOR4_PX 0.5000
-param set-default CA_ROTOR4_PY 0.5000
-param set-default CA_ROTOR5_AZ 1.0000
-param set-default CA_ROTOR5_KM 0.0000
-param set-default CA_ROTOR5_PX 0.5000
-param set-default CA_ROTOR5_PY -0.5000
-param set-default CA_ROTOR6_AZ 1.0000
-param set-default CA_ROTOR6_KM 0.0000
-param set-default CA_ROTOR6_PX -0.5000
-param set-default CA_ROTOR6_PY 0.5000
-param set-default CA_ROTOR7_KM 0.0000
-param set-default CA_ROTOR7_PX -0.5000
-param set-default CA_ROTOR7_PY -0.5000
-
-param set-default PWM_MAIN_FUNC1 101
-param set-default PWM_MAIN_FUNC2 102
-param set-default PWM_MAIN_FUNC3 103
-param set-default PWM_MAIN_FUNC4 104
-param set-default PWM_MAIN_FUNC5 105
-param set-default PWM_MAIN_FUNC6 106
-param set-default PWM_MAIN_FUNC7 107
-param set-default PWM_MAIN_FUNC8 108
-
-set MIXER skip

ROMFS/px4fmu_common/init.d-posix/airframes/1025_iris_depth_camera

@@ -1,11 +0,0 @@
-#!/bin/sh
-#
-# @name 3DR Iris Quadrotor SITL (Depth Camera)
-#
-# @type Quadrotor Wide
-#
-
-. ${R}etc/init.d-posix/airframes/10016_iris
-
-# param set COM_OBS_AVOID 1
-param set-default MPC_XY_CRUISE 5.0

ROMFS/px4fmu_common/init.d-posix/airframes/1030_plane

@@ -5,31 +5,39 @@
 
 . ${R}etc/init.d/rc.fw_defaults
 
+param set-default EKF2_ARSP_THR 8
+param set-default EKF2_FUSE_BETA 1
 param set-default EKF2_MAG_ACCLIM 0
 param set-default EKF2_MAG_YAWLIM 0
 
 param set-default FW_LND_AIRSPD_SC 1
 param set-default FW_LND_ANG 8
+param set-default FW_THR_LND_MAX 0
 
 param set-default FW_L1_PERIOD 12
 
+param set-default FW_MAN_P_MAX 30
+
+param set-default FW_PR_I 0.4
 param set-default FW_PR_P 0.9
 param set-default FW_PR_FF 0.2
 param set-default FW_PSP_OFF 2
+param set-default FW_P_LIM_MAX 32
 param set-default FW_P_LIM_MIN -15
 
 param set-default FW_RR_FF 0.1
 param set-default FW_RR_P 0.3
 
-param set-default FW_SPOILERS_LND 0.4
-
 param set-default FW_THR_MAX 0.6
 param set-default FW_THR_MIN 0.05
-param set-default FW_THR_TRIM 0.25
+param set-default FW_THR_CRUISE 0.25
 
+param set-default FW_T_ALT_TC 2
 param set-default FW_T_CLMB_MAX 8
+param set-default FW_T_HRATE_FF 0.5
 param set-default FW_T_SINK_MAX 2.7
 param set-default FW_T_SINK_MIN 2.2
+param set-default FW_T_TAS_TC 2
 
 param set-default FW_W_EN 1
 
@@ -38,35 +46,9 @@ param set-default MIS_TAKEOFF_ALT 30
 
 param set-default NAV_ACC_RAD 15
 param set-default NAV_DLL_ACT 2
+param set-default NAV_LOITER_RAD 50
 
 param set-default RWTO_TKOFF 1
 
-#param set-default SYS_CTRL_ALLOC 1
-param set-default CA_AIRFRAME 1
-
-param set-default CA_ROTOR_COUNT 1
-param set-default CA_ROTOR0_PX 0.3
-
-param set-default CA_SV_CS_COUNT 6
-param set-default CA_SV_CS0_TRQ_R -0.5
-param set-default CA_SV_CS0_TYPE 1
-param set-default CA_SV_CS1_TRQ_R 0.5
-param set-default CA_SV_CS1_TYPE 2
-param set-default CA_SV_CS2_TRQ_P 1.0
-param set-default CA_SV_CS2_TYPE 3
-param set-default CA_SV_CS3_TRQ_Y 1.0
-param set-default CA_SV_CS3_TYPE 4
-param set-default CA_SV_CS4_TYPE 9
-param set-default CA_SV_CS5_TYPE 10
-param set-default PWM_MAIN_FUNC3 204
-param set-default PWM_MAIN_FUNC4 205
-param set-default PWM_MAIN_FUNC5 101
-param set-default PWM_MAIN_FUNC6 201
-param set-default PWM_MAIN_FUNC7 202
-param set-default PWM_MAIN_FUNC8 203
-param set-default PWM_MAIN_FUNC9 206
-param set-default PWM_MAIN_REV 256
-
-
 set MIXER_FILE etc/mixers-sitl/plane_sitl.main.mix
 set MIXER custom

ROMFS/px4fmu_common/init.d-posix/airframes/1033_rascal

@@ -5,14 +5,21 @@
 
 . ${R}etc/init.d/rc.fw_defaults
 
+param set-default EKF2_ARSP_THR 8
+param set-default EKF2_FUSE_BETA 1
+
 param set-default FW_LND_AIRSPD_SC 1.1
 param set-default FW_LND_ANG 5
+param set-default FW_THR_LND_MAX 0
+param set-default FW_LND_HHDIST 30
 param set-default FW_LND_FL_PMIN 9.5
 param set-default FW_LND_FL_PMAX 20
 param set-default FW_LND_FLALT 5
+param set-default FW_LND_TLALT 15
 
 param set-default FW_L1_PERIOD 25
 
+param set-default FW_P_TC 0.4
 param set-default FW_PR_FF 0.40
 param set-default FW_PR_I 0.05
 param set-default FW_PR_P 0.05
@@ -31,10 +38,18 @@ param set-default MIS_DIST_WPS 10000
 
 param set-default NAV_ACC_RAD 15
 param set-default NAV_DLL_ACT 2
+param set-default NAV_LOITER_RAD 50
 
 param set-default RWTO_TKOFF 1
 
+# fix takeoff failure for JSBsim in autonomous mission mode.
+#param set FW_THR_SLEW_MAX 0.3
+
 param set-default RWTO_MAX_PITCH 20
+param set-default RWTO_MAX_ROLL 10
+
+# fix takeoff failure for JSBsim in autonomous mission mode.
+#param set-default RWTO_MAX_THR 0.6
 
 param set-default RWTO_PSP 8
 param set-default RWTO_AIRSPD_SCL 1.8

ROMFS/px4fmu_common/init.d-posix/airframes/1034_rascal-electric

@@ -5,14 +5,21 @@
 
 . ${R}etc/init.d/rc.fw_defaults
 
+param set-default EKF2_ARSP_THR 8
+param set-default EKF2_FUSE_BETA 1
+
 param set-default FW_LND_AIRSPD_SC 1.1
 param set-default FW_LND_ANG 5
+param set-default FW_THR_LND_MAX 0
+param set-default FW_LND_HHDIST 30
 param set-default FW_LND_FL_PMIN 9.5
 param set-default FW_LND_FL_PMAX 20
 param set-default FW_LND_FLALT 5
+param set-default FW_LND_TLALT 15
 
 param set-default FW_L1_PERIOD 25
 
+param set-default FW_P_TC 0.4
 param set-default FW_PR_FF 0.40
 param set-default FW_PR_I 0.05
 param set-default FW_PR_P 0.05
@@ -31,10 +38,18 @@ param set-default MIS_DIST_WPS 10000
 
 param set-default NAV_ACC_RAD 15
 param set-default NAV_DLL_ACT 2
+param set-default NAV_LOITER_RAD 50
 
 param set-default RWTO_TKOFF 1
 
+# fix takeoff failure for JSBsim in autonomous mission mode.
+#param set FW_THR_SLEW_MAX 0.3
+
 param set-default RWTO_MAX_PITCH 20
+param set-default RWTO_MAX_ROLL 10
+
+# fix takeoff failure for JSBsim in autonomous mission mode.
+#param set RWTO_MAX_THR 0.6
 
 param set-default RWTO_PSP 8
 param set-default RWTO_AIRSPD_SCL 1.8

ROMFS/px4fmu_common/init.d-posix/airframes/1035_techpod

@@ -5,11 +5,14 @@
 
 . ${R}etc/init.d/rc.fw_defaults
 
+param set-default EKF2_ARSP_THR 8
+param set-default EKF2_FUSE_BETA 1
 param set-default EKF2_MAG_ACCLIM 0
 param set-default EKF2_MAG_YAWLIM 0
 
 param set-default FW_LND_AIRSPD_SC 1
 param set-default FW_LND_ANG 8
+param set-default FW_THR_LND_MAX 0
 
 param set-default FW_L1_PERIOD 15
 
@@ -32,6 +35,7 @@ param set-default MIS_TAKEOFF_ALT 30
 
 param set-default NAV_ACC_RAD 15
 param set-default NAV_DLL_ACT 2
+param set-default NAV_LOITER_RAD 50
 
 param set-default RWTO_TKOFF 1
 

ROMFS/px4fmu_common/init.d-posix/airframes/1036_malolo

@@ -5,14 +5,21 @@
 
 . ${R}etc/init.d/rc.fw_defaults
 
+param set-default EKF2_ARSP_THR 8
+param set-default EKF2_FUSE_BETA 1
+
 param set-default FW_LND_AIRSPD_SC 1.1
 param set-default FW_LND_ANG 5
+param set-default FW_THR_LND_MAX 0
+param set-default FW_LND_HHDIST 30
 param set-default FW_LND_FL_PMIN 9.5
 param set-default FW_LND_FL_PMAX 20
 param set-default FW_LND_FLALT 5
+param set-default FW_LND_TLALT 15
 
 param set-default FW_L1_PERIOD 25
 
+param set-default FW_P_TC 0.4
 param set-default FW_PR_FF 0.40
 param set-default FW_PR_I 0.05
 param set-default FW_PR_P 0.05
@@ -31,9 +38,11 @@ param set-default MIS_DIST_WPS 10000
 
 param set-default NAV_ACC_RAD 15
 param set-default NAV_DLL_ACT 2
+param set-default NAV_LOITER_RAD 50
 
 param set-default RWTO_TKOFF 1
 param set-default RWTO_MAX_PITCH 20
+param set-default RWTO_MAX_ROLL 10
 param set-default RWTO_PSP 8
 param set-default RWTO_AIRSPD_SCL 1.8
 

ROMFS/px4fmu_common/init.d-posix/airframes/1037_believer

@@ -1,48 +0,0 @@
-#!/bin/sh
-#
-# @name Plane SITL
-#
-
-. ${R}etc/init.d/rc.fw_defaults
-
-param set-default EKF2_MAG_ACCLIM 0
-param set-default EKF2_MAG_YAWLIM 0
-
-param set-default FW_LND_AIRSPD_SC 1
-param set-default FW_LND_ANG 8
-
-param set-default FW_L1_PERIOD 12
-
-param set-default FW_PR_P 0.9
-param set-default FW_PR_FF 0.2
-param set-default FW_PSP_OFF 2
-param set-default FW_P_LIM_MIN -15
-
-param set-default FW_RR_FF 0.1
-param set-default FW_RR_P 0.3
-
-param set-default FW_THR_MAX 0.6
-param set-default FW_THR_MIN 0.05
-param set-default FW_THR_TRIM 0.25
-
-param set-default FW_T_ALT_TC 2
-param set-default FW_T_CLMB_MAX 8
-param set-default FW_T_HRATE_FF 0.5
-param set-default FW_T_SINK_MAX 2.7
-param set-default FW_T_SINK_MIN 2.2
-param set-default FW_T_TAS_TC 2
-
-param set-default FW_W_EN 1
-
-param set-default MIS_LTRMIN_ALT 30
-param set-default MIS_TAKEOFF_ALT 30
-
-param set-default NAV_ACC_RAD 15
-param set-default NAV_DLL_ACT 2
-
-param set-default FW_USE_NPFG 1
-
-param set-default RWTO_TKOFF 1
-
-set MIXER_FILE etc/mixers-sitl/plane_sitl.main.mix
-set MIXER custom

ROMFS/px4fmu_common/init.d-posix/airframes/1038_glider

@@ -1,9 +0,0 @@
-#!/bin/sh
-#
-# @name Plane SITL with catapult
-#
-
-. ${R}etc/init.d-posix/airframes/1030_plane
-
-param set-default FW_THR_TRIM 0.0
-param set-default RWTO_TKOFF 0

ROMFS/px4fmu_common/init.d-posix/airframes/1040_standard_vtol

@@ -7,62 +7,26 @@
 
 . ${R}etc/init.d/rc.vtol_defaults
 
-# TODO: Enable motor failure detection when the
-# VTOL no longer reports 0A for all ESCs in SITL
-param set-default FD_ACT_EN 0
-param set-default FD_ACT_MOT_TOUT 500
-
-# param set-default SYS_CTRL_ALLOC 1
-param set-default CA_AIRFRAME 2
-
-param set-default CA_ROTOR_COUNT 5
-param set-default CA_ROTOR0_PX 0.1515
-param set-default CA_ROTOR0_PY 0.245
-param set-default CA_ROTOR0_KM 0.05
-param set-default CA_ROTOR1_PX -0.1515
-param set-default CA_ROTOR1_PY -0.1875
-param set-default CA_ROTOR1_KM 0.05
-param set-default CA_ROTOR2_PX 0.1515
-param set-default CA_ROTOR2_PY -0.245
-param set-default CA_ROTOR2_KM -0.05
-param set-default CA_ROTOR3_PX -0.1515
-param set-default CA_ROTOR3_PY 0.1875
-param set-default CA_ROTOR3_KM -0.05
-param set-default CA_ROTOR4_AX 1.0
-param set-default CA_ROTOR4_AZ 0.0
-param set-default CA_ROTOR4_PX 0.2
-
-param set-default CA_SV_CS_COUNT 3
-param set-default CA_SV_CS0_TYPE 1
-param set-default CA_SV_CS0_TRQ_R -0.5
-param set-default CA_SV_CS1_TYPE 2
-param set-default CA_SV_CS1_TRQ_R 0.5
-param set-default CA_SV_CS2_TYPE 3
-param set-default CA_SV_CS2_TRQ_P 1.0
-param set-default PWM_MAIN_FUNC1 101
-param set-default PWM_MAIN_FUNC2 102
-param set-default PWM_MAIN_FUNC3 103
-param set-default PWM_MAIN_FUNC4 104
-param set-default PWM_MAIN_FUNC5 105
-param set-default PWM_MAIN_FUNC6 201
-param set-default PWM_MAIN_FUNC7 202
-param set-default PWM_MAIN_FUNC8 203
-
 param set-default FW_L1_PERIOD 12
+param set-default FW_MAN_P_MAX 30
 param set-default FW_PR_FF 0.2
+param set-default FW_PR_I 0.4
 param set-default FW_PR_P 0.9
 param set-default FW_PSP_OFF 2
+param set-default FW_P_LIM_MAX 32
 param set-default FW_P_LIM_MIN -15
 param set-default FW_RR_FF 0.1
 param set-default FW_RR_P 0.3
-param set-default FW_THR_TRIM 0.25
+param set-default FW_THR_CRUISE 0.25
 param set-default FW_THR_MAX 0.6
 param set-default FW_THR_MIN 0.05
+param set-default FW_T_ALT_TC 2
 param set-default FW_T_CLMB_MAX 8
+param set-default FW_T_HRATE_FF 0.5
 param set-default FW_T_SINK_MAX 2.7
 param set-default FW_T_SINK_MIN 2.2
+param set-default FW_T_TAS_TC 2
 
-param set-default MC_AIRMODE 1
 param set-default MC_ROLLRATE_P 0.3
 param set-default MC_YAW_P 1.6
 
@@ -75,6 +39,7 @@ param set-default MPC_XY_VEL_I_ACC 4
 param set-default MPC_XY_VEL_D_ACC 0.1
 
 param set-default NAV_ACC_RAD 5
+param set-default NAV_LOITER_RAD 80
 
 param set-default VT_FWD_THRUST_EN 4
 param set-default VT_F_TRANS_THR 0.75
@@ -83,5 +48,7 @@ param set-default VT_FW_MOT_OFFID 1234
 param set-default VT_B_TRANS_DUR 8
 param set-default VT_TYPE 2
 
+set MAV_TYPE 22
+
 set MIXER_FILE etc/mixers-sitl/standard_vtol_sitl.main.mix
 set MIXER custom

ROMFS/px4fmu_common/init.d-posix/airframes/1041_tailsitter

@@ -7,49 +7,15 @@
 
 . ${R}etc/init.d/rc.vtol_defaults
 
-param set-default MAV_TYPE 20
-
-# param set-default SYS_CTRL_ALLOC 1
-param set-default CA_AIRFRAME 4
-
-param set-default CA_ROTOR_COUNT 4
-param set-default CA_ROTOR0_PX 1
-param set-default CA_ROTOR0_PY 2
-param set-default CA_ROTOR0_KM 0.05
-param set-default CA_ROTOR1_PX -1
-param set-default CA_ROTOR1_PY -1
-param set-default CA_ROTOR1_KM 0.05
-param set-default CA_ROTOR2_PX 1
-param set-default CA_ROTOR2_PY -1
-param set-default CA_ROTOR2_KM -0.05
-param set-default CA_ROTOR3_PX -1
-param set-default CA_ROTOR3_PY 1
-param set-default CA_ROTOR3_KM -0.05
-
-param set-default CA_SV_CS_COUNT 2
-param set-default CA_SV_CS0_TYPE 5
-param set-default CA_SV_CS0_TRQ_P 0.5
-param set-default CA_SV_CS0_TRQ_Y -0.5
-param set-default CA_SV_CS1_TYPE 6
-param set-default CA_SV_CS1_TRQ_P 0.5
-param set-default CA_SV_CS1_TRQ_Y 0.5
-
-param set-default PWM_MAIN_FUNC1 101
-param set-default PWM_MAIN_FUNC2 102
-param set-default PWM_MAIN_FUNC3 103
-param set-default PWM_MAIN_FUNC4 104
-param set-default PWM_MAIN_FUNC5 0
-param set-default PWM_MAIN_FUNC6 201
-param set-default PWM_MAIN_FUNC7 202
-param set-default PWM_MAIN_REV 96 # invert both elevons
-
 param set-default FW_L1_PERIOD 12
+param set-default FW_MAN_P_MAX 30
 param set-default FW_PR_I 0.2
-param set-default FW_PR_P 0.2
+param set-default FW_PR_P 0.3
 param set-default FW_PSP_OFF 2
+param set-default FW_P_LIM_MAX 32
 param set-default FW_P_LIM_MIN -15
-param set-default FW_RR_P 0.2
+param set-default FW_RR_P 0.3
-param set-default FW_THR_TRIM 0.33
+param set-default FW_THR_CRUISE 0.33
 param set-default FW_THR_MAX 0.6
 param set-default FW_THR_MIN 0.05
 param set-default FW_T_ALT_TC 2
@@ -59,7 +25,6 @@ param set-default FW_T_SINK_MAX 2.7
 param set-default FW_T_SINK_MIN 2.2
 param set-default FW_T_TAS_TC 2
 
-param set-default MC_AIRMODE 1
 param set-default MC_ROLLRATE_P 0.3
 
 param set-default MPC_ACC_HOR_MAX 2
@@ -69,14 +34,15 @@ param set-default MPC_XY_VEL_I_ACC 4
 param set-default MPC_XY_VEL_D_ACC 0.1
 
 param set-default NAV_ACC_RAD 5
+param set-default NAV_LOITER_RAD 80
 
-param set-default VT_FW_DIFTHR_EN 1
-param set-default VT_FW_DIFTHR_SC 0.5
 param set-default VT_F_TRANS_DUR 1.5
 param set-default VT_F_TRANS_THR 0.7
 param set-default VT_TYPE 0
 
 param set-default WV_EN 0
 
+set MAV_TYPE 20
+
 set MIXER_FILE etc/mixers-sitl/quad_x_vtol.main.mix
 set MIXER custom

ROMFS/px4fmu_common/init.d-posix/airframes/1042_tiltrotor

@@ -7,68 +7,27 @@
 
 . ${R}etc/init.d/rc.vtol_defaults
 
-param set-default MAV_TYPE 21
-
-param set-default SYS_CTRL_ALLOC 1
-param set-default CA_AIRFRAME 3
-
-param set-default CA_ROTOR_COUNT 4
-param set-default CA_ROTOR0_PX 0.1515
-param set-default CA_ROTOR0_PY 0.245
-param set-default CA_ROTOR0_KM 0.05
-param set-default CA_ROTOR1_PX -0.1515
-param set-default CA_ROTOR1_PY -0.1875
-param set-default CA_ROTOR1_KM 0.05
-param set-default CA_ROTOR2_PX 0.1515
-param set-default CA_ROTOR2_PY -0.245
-param set-default CA_ROTOR2_KM -0.05
-param set-default CA_ROTOR3_PX -0.1515
-param set-default CA_ROTOR3_PY 0.1875
-param set-default CA_ROTOR3_KM -0.05
-
-param set-default CA_ROTOR0_TILT 1
-param set-default CA_ROTOR2_TILT 3
-param set-default CA_SV_CS0_TRQ_R -0.5
-param set-default CA_SV_CS0_TYPE 1
-param set-default CA_SV_CS1_TRQ_R 0.5
-param set-default CA_SV_CS1_TYPE 2
-param set-default CA_SV_CS2_TRQ_P 1.0
-param set-default CA_SV_CS2_TYPE 3
-param set-default CA_SV_CS_COUNT 3
-param set-default CA_SV_TL1_CT 0
-param set-default CA_SV_TL3_CT 0
-param set-default CA_SV_TL_COUNT 4
-
-param set-default PWM_MAIN_FUNC1 101
-param set-default PWM_MAIN_FUNC2 102
-param set-default PWM_MAIN_FUNC3 103
-param set-default PWM_MAIN_FUNC4 104
-param set-default PWM_MAIN_FUNC5 204
-param set-default PWM_MAIN_FUNC6 205
-param set-default PWM_MAIN_FUNC7 206
-param set-default PWM_MAIN_FUNC8 207
-param set-default PWM_MAIN_FUNC9 201
-param set-default PWM_MAIN_FUNC10 202
-param set-default PWM_MAIN_FUNC11 203
-
 param set-default FW_L1_PERIOD 12
+param set-default FW_MAN_P_MAX 30
 param set-default FW_PR_FF 0.2
+param set-default FW_PR_I 0.4
 param set-default FW_PR_P 0.9
 param set-default FW_PSP_OFF 2
+param set-default FW_P_LIM_MAX 32
 param set-default FW_P_LIM_MIN -15
 param set-default FW_RR_FF 0.1
 param set-default FW_RR_P 0.3
-param set-default FW_THR_TRIM 0.38
+param set-default FW_THR_CRUISE 0.38
 param set-default FW_THR_MAX 0.6
 param set-default FW_THR_MIN 0.05
+param set-default FW_T_ALT_TC 2
 param set-default FW_T_CLMB_MAX 8
+param set-default FW_T_HRATE_FF 0.5
 param set-default FW_T_SINK_MAX 2.7
 param set-default FW_T_SINK_MIN 2.2
+param set-default FW_T_TAS_TC 2
 
 param set-default MC_YAW_P 1.6
-param set-default MC_AIRMODE 1
-param set-default MC_YAWRATE_P 0.3
-param set-default MC_YAWRATE_I 0.3
 
 param set-default MIS_TAKEOFF_ALT 10
 
@@ -79,6 +38,7 @@ param set-default MPC_XY_VEL_I_ACC 4
 param set-default MPC_XY_VEL_D_ACC 0.1
 
 param set-default NAV_ACC_RAD 5
+param set-default NAV_LOITER_RAD 80
 
 param set-default VT_B_TRANS_DUR 8
 param set-default VT_FWD_THRUST_EN 4
@@ -86,5 +46,7 @@ param set-default VT_MOT_ID 1234
 param set-default VT_TILT_TRANS 0.6
 param set-default VT_TYPE 1
 
+set MAV_TYPE 21
+
 set MIXER_FILE etc/mixers-sitl/tiltrotor_sitl.main.mix
 set MIXER custom

ROMFS/px4fmu_common/init.d-posix/airframes/1043_standard_vtol_drop

@@ -8,13 +8,16 @@
 . ${R}etc/init.d/rc.vtol_defaults
 
 param set-default FW_L1_PERIOD 12
+param set-default FW_MAN_P_MAX 30
 param set-default FW_PR_FF 0.2
+param set-default FW_PR_I 0.4
 param set-default FW_PR_P 0.9
 param set-default FW_PSP_OFF 2
+param set-default FW_P_LIM_MAX 32
 param set-default FW_P_LIM_MIN -15
 param set-default FW_RR_FF 0.1
 param set-default FW_RR_P 0.3
-param set-default FW_THR_TRIM 0.25
+param set-default FW_THR_CRUISE 0.25
 param set-default FW_THR_MAX 0.6
 param set-default FW_THR_MIN 0.05
 param set-default FW_T_ALT_TC 2
@@ -36,6 +39,7 @@ param set-default MPC_XY_VEL_I_ACC 4
 param set-default MPC_XY_VEL_D_ACC 0.1
 
 param set-default NAV_ACC_RAD 5
+param set-default NAV_LOITER_RAD 80
 
 param set-default VT_FWD_THRUST_EN 4
 param set-default VT_F_TRANS_THR 0.75
@@ -48,5 +52,7 @@ param set-default RC_MAP_AUX1 8
 param set-default RC_MAP_AUX2 9
 param set-default RC_MAP_AUX3 10
 
+set MAV_TYPE 22
+
 set MIXER_FILE etc/mixers-sitl/standard_vtol_sitl.main.mix
 set MIXER custom

ROMFS/px4fmu_common/init.d-posix/airframes/1058_standard_vtol_gimbal

@@ -1,17 +0,0 @@
-#!/bin/sh
-#
-# @name Standard VTOL with gimbal
-#
-# @type Standard VTOL with gimbal
-#
-
-. ${R}etc/init.d-posix/1040_standard_vtol
-
-param set-default TRIG_INTERFACE 3
-param set-default TRIG_MODE 4
-param set-default MNT_MODE_IN 0
-
-param set-default MAV_TYPE 22
-
-set MIXER_FILE etc/mixers-sitl/standard_vtol_sitl.main.mix
-set MIXER custom

ROMFS/px4fmu_common/init.d-posix/airframes/1058_standard_vtol_gimbal.post

@@ -1,10 +0,0 @@
-
-mixer append /dev/pwm_output0 etc/mixers/mount_legs.aux.mix
-
-mavlink start -x -u 14558 -r 4000 -f -m onboard -o 14530
-
-# shellcheck disable=SC2154
-mavlink stream -r 10 -s MOUNT_ORIENTATION -u $udp_gcs_port_local
-# shellcheck disable=SC2154
-mavlink stream -r 50 -s ATTITUDE_QUATERNION -u $udp_offboard_port_local
-mavlink stream -r 10 -s MOUNT_ORIENTATION -u $udp_offboard_port_local

ROMFS/px4fmu_common/init.d-posix/airframes/1059_tiltrotor_tri

@@ -1,54 +0,0 @@
-#!/bin/sh
-#
-# @name VTOL Tiltrotor Tricopter
-#
-# @type VTOL Tiltrotor Tricopter
-#
-
-. ${R}etc/init.d/rc.vtol_defaults
-
-param set-default FW_AIRSPD_MAX 25
-param set-default FW_AIRSPD_MIN 14
-param set-default FW_AIRSPD_TRIM 16
-param set-default FW_L1_PERIOD 12
-
-param set-default MC_ROLLRATE_P 0.3
-
-param set-default MIS_LTRMIN_ALT 10
-param set-default MIS_TAKEOFF_ALT 10
-param set-default MIS_YAW_TMT 10
-
-param set-default MC_PITCHRATE_P 0.3
-param set-default MC_PITCH_P 5.0
-param set-default MC_ROLLRATE_P 0.4
-param set-default MC_ROLL_P 5.0
-param set-default MC_YAWRATE_P 0.8
-param set-default MC_YAW_P 1.5
-
-param set-default MPC_ACC_HOR_MAX 2
-param set-default MPC_ACC_HOR_MAX 2
-param set-default MPC_MAN_Y_MAX 70
-param set-default MPC_THR_MIN 0.1
-param set-default MPC_TKO_SPEED 1
-param set-default MPC_XY_P 0.15
-param set-default MPC_XY_VEL_D 0.005
-param set-default MPC_XY_VEL_I 0.2
-param set-default MPC_XY_VEL_P 0.05
-param set-default MPC_Z_VEL_MAX_DN 1.5
-param set-default MPC_Z_VEL_P 0.8
-
-param set-default NAV_ACC_RAD 5
-param set-default NAV_LOITER_RAD 80
-
-param set-default VT_F_TRANS_DUR 5.0
-param set-default VT_F_TRANS_THR 0.75
-param set-default VT_TILT_FW 3.1415
-param set-default VT_TILT_TRANS 1.2
-param set-default VT_ELEV_MC_LOCK 0
-param set-default VT_TYPE 1
-param set-default VT_B_TRANS_DUR 8
-
-param set-default MAV_TYPE 24
-
-set MIXER_FILE etc/mixers-sitl/tiltrotor_tri_sitl.main.mix
-set MIXER custom

ROMFS/px4fmu_common/init.d-posix/airframes/1060_rover

@@ -28,13 +28,6 @@ param set-default CBRK_AIRSPD_CHK 162128
 param set-default GND_MAX_ANG 0.6
 param set-default GND_WHEEL_BASE 2.0
 
-param set-default SYS_CTRL_ALLOC 1
+set MAV_TYPE 10
-param set-default CA_AIRFRAME 5
 
-param set-default CA_R_REV 1
+set MIXER_FILE etc/mixers-sitl/rover_ackermann_sitl.main.mix
-param set-default PWM_MAIN_FUNC1 201
-param set-default PWM_MAIN_FUNC2 201
-param set-default PWM_MAIN_FUNC6 101
-param set-default PWM_MAIN_FUNC7 101
-
-set MIXER_FILE skip

ROMFS/px4fmu_common/init.d-posix/airframes/1061_r1_rover

@@ -28,13 +28,6 @@ param set-default CBRK_AIRSPD_CHK 162128
 param set-default GND_MAX_ANG 0.6
 param set-default GND_WHEEL_BASE 2.0
 
-param set-default SYS_CTRL_ALLOC 1
+set MAV_TYPE 10
-param set-default CA_AIRFRAME 6
 
-param set-default CA_R_REV 3
+set MIXER_FILE etc/mixers-sitl/rover_diff_sitl.main.mix
-param set-default PWM_MAIN_FUNC1 101
-param set-default PWM_MAIN_FUNC2 101
-param set-default PWM_MAIN_FUNC6 102
-param set-default PWM_MAIN_FUNC7 102
-
-set MIXER_FILE skip

ROMFS/px4fmu_common/init.d-posix/airframes/1062_tf-r1

@@ -10,8 +10,6 @@
 
 . ${R}etc/init.d/rc.rover_defaults
 
-param set-default MAV_TYPE 10
-
 param set-default GND_L1_DIST 5
 param set-default GND_SP_CTRL_MODE 1
 param set-default GND_SPEED_D 3
@@ -35,4 +33,6 @@ param set-default CBRK_AIRSPD_CHK 162128
 param set-default GND_MAX_ANG 0.6
 param set-default GND_WHEEL_BASE 3.0
 
+set MAV_TYPE 10
+
 set MIXER_FILE etc/mixers-sitl/rover_ackermann_sitl.main.mix

ROMFS/px4fmu_common/init.d-posix/airframes/1063_rover_gimbal

@@ -1,39 +0,0 @@
-#!/bin/sh
-#
-# @name Rover
-#
-
-. ${R}etc/init.d/rc.rover_defaults
-
-param set-default GND_L1_DIST 5
-param set-default GND_SP_CTRL_MODE 1
-param set-default GND_SPEED_D 0.001
-param set-default GND_SPEED_I 3
-param set-default GND_SPEED_IMAX 0.125
-param set-default GND_SPEED_P 0.25
-param set-default GND_SPEED_THR_SC 1
-param set-default GND_SPEED_TRIM 4
-param set-default GND_THR_CRUISE 0.3
-param set-default GND_THR_IDLE 0
-param set-default GND_THR_MAX 0.5
-param set-default GND_THR_MIN 0
-
-param set-default MIS_LTRMIN_ALT 0.01
-param set-default MIS_TAKEOFF_ALT 0.01
-param set-default NAV_ACC_RAD 0.5
-param set-default NAV_LOITER_RAD 2
-
-param set-default CBRK_AIRSPD_CHK 162128
-
-param set-default GND_MAX_ANG 0.6
-param set-default GND_WHEEL_BASE 2.0
-
-param set-default TRIG_INTERFACE 3
-param set-default TRIG_MODE 4
-param set-default MNT_MODE_IN 4
-param set-default MNT_MODE_OUT 2
-param set-default MNT_DO_STAB 2
-
-param set-default MAV_TYPE 10
-
-set MIXER_FILE etc/mixers-sitl/rover_ackermann_sitl.main.mix

ROMFS/px4fmu_common/init.d-posix/airframes/1063_rover_gimbal.post

@@ -1,10 +0,0 @@
-
-mixer append /dev/pwm_output0 etc/mixers/mount_legs.aux.mix
-
-mavlink start -x -u 14558 -r 4000 -f -m onboard -o 14530
-
-# shellcheck disable=SC2154
-mavlink stream -r 10 -s MOUNT_ORIENTATION -u $udp_gcs_port_local
-# shellcheck disable=SC2154
-mavlink stream -r 50 -s ATTITUDE_QUATERNION -u $udp_offboard_port_local
-mavlink stream -r 10 -s MOUNT_ORIENTATION -u $udp_offboard_port_local

ROMFS/px4fmu_common/init.d-posix/airframes/1070_boat

@@ -28,23 +28,6 @@ param set-default CBRK_AIRSPD_CHK 162128
 param set-default GND_MAX_ANG 0.6
 param set-default GND_WHEEL_BASE 2.0
 
-param set-default SYS_CTRL_ALLOC 1
+set MAV_TYPE 11
-param set-default CA_AIRFRAME 9
 
-param set-default CA_ROTOR_COUNT 2
+set MIXER_FILE etc/mixers-sitl/boat_sitl.main.mix
-param set-default CA_ROTOR0_AX 1
-param set-default CA_ROTOR0_AZ 0
-param set-default CA_ROTOR0_KM 0
-param set-default CA_ROTOR0_PX -2
-param set-default CA_ROTOR0_PY -1
-param set-default CA_ROTOR1_AX 1
-param set-default CA_ROTOR1_AZ 0
-param set-default CA_ROTOR1_KM 0
-param set-default CA_ROTOR1_PX -2
-param set-default CA_ROTOR1_PY 1
-param set-default CA_R_REV 3
-
-param set-default PWM_MAIN_FUNC1 101
-param set-default PWM_MAIN_FUNC2 102
-
-set MIXER skip

ROMFS/px4fmu_common/init.d-posix/airframes/17001_tf-g1

@@ -12,12 +12,20 @@
 
 . ${R}etc/init.d/rc.fw_defaults
 
-param set-default FW_AIRSPD_STALL 8
+param set-default EKF2_ARSP_THR 8
+param set-default EKF2_FUSE_BETA 1
+param set-default ASPD_STALL 10.0
 
 param set-default FW_P_RMAX_NEG 20.0
+param set-default FW_P_RMAX_POS 60.0
 param set-default FW_W_RMAX 10
 param set-default FW_W_EN 1
 
+param set-default FW_PR_IMAX 0.4
+param set-default FW_R_TC 0.4
+param set-default FW_RR_FF 0.5
+param set-default FW_RR_I 0.1
+param set-default FW_RR_IMAX 0.2
 param set-default FW_RR_P 0.08
 
 param set-default MIS_LTRMIN_ALT 50
@@ -33,14 +41,16 @@ param set-default FW_ARSP_SCALE_EN 0
 
 param set-default FW_AIRSPD_MAX 35
 param set-default FW_AIRSPD_MIN 7
+param set-default FW_AIRSPD_TRIM 15
 
 param set-default FW_P_LIM_MAX 25
 param set-default FW_P_LIM_MIN -5
 param set-default FW_R_LIM 30
 
+param set-default FW_MAN_P_MAX 30.0
 param set-default FW_MAN_R_MAX 30.0
 
-param set-default FW_THR_TRIM 0.8
+param set-default FW_THR_CRUISE 0.8
 param set-default FW_THR_IDLE 0
 param set-default COM_DISARM_PRFLT 0
 

ROMFS/px4fmu_common/init.d-posix/airframes/2507_cloudship

@@ -11,31 +11,5 @@
 
 . ${R}etc/init.d/rc.airship_defaults
 
-param set-default SYS_CTRL_ALLOC 1
+set MIXER cloudship
-param set-default CA_AIRFRAME 9
+set PWM_OUT 1234
-
-param set-default CA_ROTOR_COUNT 3
-param set-default CA_ROTOR0_AX 1.0000
-param set-default CA_ROTOR0_AZ 0.0000
-param set-default CA_ROTOR0_KM 0.0000
-param set-default CA_ROTOR0_PY 2.0000
-param set-default CA_ROTOR1_AX 1.0000
-param set-default CA_ROTOR1_AZ 0.0000
-param set-default CA_ROTOR1_KM 0.0000
-param set-default CA_ROTOR1_PY -2.0000
-param set-default CA_ROTOR2_AY -1.0000
-param set-default CA_ROTOR2_AZ 0.0000
-param set-default CA_ROTOR2_KM 0.0000
-param set-default CA_ROTOR2_PX -10.0000
-
-param set-default CA_SV_CS_COUNT 1
-param set-default CA_SV_CS0_TRQ_P 1.0000
-
-param set-default CA_R_REV 7
-
-param set-default PWM_MAIN_FUNC1 101
-param set-default PWM_MAIN_FUNC2 102
-param set-default PWM_MAIN_FUNC3 201
-param set-default PWM_MAIN_FUNC4 103
-
-set MIXER skip

ROMFS/px4fmu_common/init.d-posix/airframes/3011_hexarotor_x

@@ -9,11 +9,10 @@
 
 . ${R}etc/init.d/rc.mc_defaults
 
-param set-default MAV_TYPE 13
-
 param set-default MC_PITCHRATE_P 0.1
 param set-default MC_PITCHRATE_I 0.05
 param set-default MC_PITCH_P 6.0
+param set-default MC_ROLLRATE_P 0.15
 param set-default MC_ROLLRATE_I 0.1
 param set-default MC_ROLL_P 6.0
 param set-default MPC_XY_VEL_I_ACC 4
@@ -26,4 +25,6 @@ param set-default TRIG_MODE 4
 param set-default MNT_MODE_IN 4
 param set-default MNT_DO_STAB 2
 
+set MAV_TYPE 13
+
 set MIXER hexa_x

ROMFS/px4fmu_common/init.d-posix/airframes/6011_typhoon_h480

@@ -7,8 +7,6 @@
 
 . ${R}etc/init.d/rc.mc_defaults
 
-param set-default MAV_TYPE 13
-
 param set-default MC_PITCHRATE_P 0.0800
 param set-default MC_PITCHRATE_I 0.0400
 param set-default MC_PITCHRATE_D 0.0010
@@ -28,4 +26,6 @@ param set-default MNT_MODE_IN 4
 param set-default MNT_MODE_OUT 2
 param set-default MAV_PROTO_VER 2
 
+set MAV_TYPE 13
+
 set MIXER hexa_x

ROMFS/px4fmu_common/init.d-posix/airframes/6012_typhoon_ctrlalloc

@@ -0,0 +1,72 @@
+#!/bin/sh
+#
+# @name Typhoon H480 SITL
+#
+# @type Hexarotor x
+#
+
+. ${R}etc/init.d/rc.mc_defaults
+. ${R}etc/init.d/rc.ctrlalloc
+
+param set-default MPC_XY_VEL_I_ACC 4
+param set-default MPC_XY_VEL_P_ACC 3
+
+param set-default RTL_DESCEND_ALT 10
+param set-default RTL_LAND_DELAY 0
+
+param set-default TRIG_INTERFACE 3
+param set-default TRIG_MODE 4
+param set-default MNT_MODE_IN 0
+param set-default MAV_PROTO_VER 2
+
+param set-default MPC_USE_HTE 0
+
+param set-default VM_MASS 2.66
+param set-default VM_INERTIA_XX 0.06
+param set-default VM_INERTIA_YY 0.06
+param set-default VM_INERTIA_ZZ 0.10
+
+param set-default CA_AIRFRAME 0
+param set-default CA_METHOD 1
+param set-default CA_ACT0_MIN 0.0
+param set-default CA_ACT1_MIN 0.0
+param set-default CA_ACT2_MIN 0.0
+param set-default CA_ACT3_MIN 0.0
+param set-default CA_ACT4_MIN 0.0
+param set-default CA_ACT5_MIN 0.0
+param set-default CA_ACT0_MAX 1.0
+param set-default CA_ACT1_MAX 1.0
+param set-default CA_ACT2_MAX 1.0
+param set-default CA_ACT3_MAX 1.0
+param set-default CA_ACT4_MAX 1.0
+param set-default CA_ACT5_MAX 1.0
+
+param set-default CA_MC_R0_PX 0.0
+param set-default CA_MC_R0_PY 1.0
+param set-default CA_MC_R0_CT 9.5
+param set-default CA_MC_R0_KM -0.05
+param set-default CA_MC_R1_PX 0.0
+param set-default CA_MC_R1_PY -1.0
+param set-default CA_MC_R1_CT 9.5
+param set-default CA_MC_R1_KM 0.05
+param set-default CA_MC_R2_PX 0.866025
+param set-default CA_MC_R2_PY -0.5
+param set-default CA_MC_R2_CT 9.5
+param set-default CA_MC_R2_KM -0.05
+param set-default CA_MC_R3_PX -0.866025
+param set-default CA_MC_R3_PY 0.5
+param set-default CA_MC_R3_CT 9.5
+param set-default CA_MC_R3_KM 0.05
+param set-default CA_MC_R4_PX 0.866025
+param set-default CA_MC_R4_PY 0.5
+param set-default CA_MC_R4_CT 9.5
+param set-default CA_MC_R4_KM 0.05
+param set-default CA_MC_R5_PX -0.866025
+param set-default CA_MC_R5_PY -0.5
+param set-default CA_MC_R5_CT 9.5
+param set-default CA_MC_R5_KM -0.05
+
+set MAV_TYPE 13
+
+# set MIXER hexa_x
+set MIXER direct

ROMFS/px4fmu_common/init.d-posix/airframes/6012_typhoon_ctrlalloc.post

@@ -1,7 +1,7 @@
 
 mixer append /dev/pwm_output0 etc/mixers/mount_legs.aux.mix
 
-mavlink start -x -u 14558 -r 4000 -f -m onboard -o 14530
+mavlink start -x -u 14558 -r 4000 -f -m onboard -o 14530 -p
 
 # shellcheck disable=SC2154
 mavlink stream -r 10 -s MOUNT_ORIENTATION -u $udp_gcs_port_local

ROMFS/px4fmu_common/init.d-posix/airframes/6012_typhoon_h480_ctrlalloc

@@ -1,70 +0,0 @@
-#!/bin/sh
-#
-# @name Typhoon H480 SITL
-#
-# @type Hexarotor x
-#
-
-. ${R}etc/init.d/rc.mc_defaults
-
-param set-default MAV_TYPE 13
-
-param set-default SYS_CTRL_ALLOC 1
-
-param set-default MC_PITCHRATE_P 0.0800
-param set-default MC_PITCHRATE_I 0.0400
-param set-default MC_PITCHRATE_D 0.0010
-param set-default MC_PITCH_P 9.0
-param set-default MC_ROLLRATE_P 0.0800
-param set-default MC_ROLLRATE_I 0.0400
-param set-default MC_ROLLRATE_D 0.0010
-param set-default MC_ROLL_P 9.0
-
-param set-default MC_PITCHRATE_P 0.0800
-param set-default MC_PITCHRATE_I 0.0400
-param set-default MC_PITCHRATE_D 0.0010
-param set-default MC_PITCH_P 9.0
-param set-default MC_ROLLRATE_P 0.0800
-param set-default MC_ROLLRATE_I 0.0400
-param set-default MC_ROLLRATE_D 0.0010
-param set-default MC_ROLL_P 9.0
-
-param set-default RTL_DESCEND_ALT 10
-param set-default RTL_LAND_DELAY 0
-
-param set-default TRIG_INTERFACE 3
-param set-default TRIG_MODE 4
-param set-default MNT_MODE_IN 0
-param set-default MAV_PROTO_VER 2
-
-param set-default CA_AIRFRAME 0
-param set-default CA_ROTOR_COUNT 6
-
-param set-default CA_ROTOR0_PX 0.0
-param set-default CA_ROTOR0_PY 1.0
-param set-default CA_ROTOR0_KM -0.05
-param set-default CA_ROTOR1_PX 0.0
-param set-default CA_ROTOR1_PY -1.0
-param set-default CA_ROTOR1_KM 0.05
-param set-default CA_ROTOR2_PX 0.866025
-param set-default CA_ROTOR2_PY -0.5
-param set-default CA_ROTOR2_KM -0.05
-param set-default CA_ROTOR3_PX -0.866025
-param set-default CA_ROTOR3_PY 0.5
-param set-default CA_ROTOR3_KM 0.05
-param set-default CA_ROTOR4_PX 0.866025
-param set-default CA_ROTOR4_PY 0.5
-param set-default CA_ROTOR4_KM 0.05
-param set-default CA_ROTOR5_PX -0.866025
-param set-default CA_ROTOR5_PY -0.5
-param set-default CA_ROTOR5_KM -0.05
-
-param set-default PWM_MAIN_FUNC1 101
-param set-default PWM_MAIN_FUNC2 102
-param set-default PWM_MAIN_FUNC3 103
-param set-default PWM_MAIN_FUNC4 104
-param set-default PWM_MAIN_FUNC5 105
-param set-default PWM_MAIN_FUNC6 106
-
-set MIXER skip
-set MIXER_AUX none

ROMFS/px4fmu_common/init.d-posix/airframes/6012_typhoon_h480_ctrlalloc.post

@@ -1,8 +0,0 @@
-
-mavlink start -x -u 14558 -r 4000 -f -m onboard -o 14530 -p
-
-# shellcheck disable=SC2154
-mavlink stream -r 10 -s MOUNT_ORIENTATION -u $udp_gcs_port_local
-# shellcheck disable=SC2154
-mavlink stream -r 50 -s ATTITUDE_QUATERNION -u $udp_offboard_port_local
-mavlink stream -r 10 -s MOUNT_ORIENTATION -u $udp_offboard_port_local

ROMFS/px4fmu_common/init.d-posix/airframes/CMakeLists.txt

@@ -35,15 +35,8 @@ px4_add_romfs_files(
 	10016_iris
 	10017_iris_ctrlalloc
 	10018_iris_foggy_lidar
-	10019_omnicopter
 	10020_if750a
-	10020_if750a.post
-	10028_quadrotor_x
-	10029_hexarotor_x
 	10030_px4vision
-	10040_quadx
-	10041_airplane
-	10042_xvert
 	1010_iris_opt_flow
 	1010_iris_opt_flow.post
 	1011_iris_irlock
@@ -53,13 +46,14 @@ px4_add_romfs_files(
 	1014_solo
 	1015_iris_obs_avoid
 	1015_iris_obs_avoid.post
+	1016_iris_rtps
+	1016_iris_rtps.post
 	1017_iris_opt_flow_mockup
 	1018_iris_vision_velocity
 	1019_iris_dual_gps
 	1020_uuv_generic
 	1021_uuv_hippocampus
 	1022_uuv_bluerov2_heavy
-	1025_iris_depth_camera
 	1030_plane
 	1031_plane_cam
 	1032_plane_catapult
@@ -68,21 +62,14 @@ px4_add_romfs_files(
 	1034_rascal-electric
 	1035_techpod
 	1036_malolo
-	1037_believer
-	1038_glider
 	1040_standard_vtol
 	1041_tailsitter
 	1042_tiltrotor
 	1043_standard_vtol_drop
 	1043_standard_vtol_drop.post
-	1058_standard_vtol_gimbal
-	1058_standard_vtol_gimbal.post
-	1059_tiltrotor_tri
 	1060_rover
 	1061_r1_rover
 	1062_tf-r1
-	1063_rover_gimbal
-	1063_rover_gimbal.post
 	1070_boat
 	3010_quadrotor_x
 	3011_hexarotor_x
@@ -90,6 +77,6 @@ px4_add_romfs_files(
 	2507_cloudship
 	6011_typhoon_h480
 	6011_typhoon_h480.post
-	6012_typhoon_h480_ctrlalloc
+	6012_typhoon_ctrlalloc
-	6012_typhoon_h480_ctrlalloc.post
+	6012_typhoon_ctrlalloc.post
 )

ROMFS/px4fmu_common/init.d-posix/px4-rc.mavlink

@@ -24,19 +24,9 @@ mavlink stream -r 10 -s OPTICAL_FLOW_RAD -u $udp_gcs_port_local
 
 # API/Offboard link
 mavlink start -x -u $udp_offboard_port_local -r 4000000 -f -m onboard -o $udp_offboard_port_remote
-mavlink stream -r 2 -s COMMAND_CANCEL -u $udp_offboard_port_local
 
 # Onboard link to camera
 mavlink start -x -u $udp_onboard_payload_port_local -r 4000 -f -m onboard -o $udp_onboard_payload_port_remote
 
 # Onboard link to gimbal
 mavlink start -x -u $udp_onboard_gimbal_port_local -r 400000 -m gimbal -o $udp_onboard_gimbal_port_remote
-
-# To display for SIH sitl
-if [ "$SIM_MODE" = "sihsim" ]; then
-	udp_sihsim_port_local=$((19450+px4_instance))
-	udp_sihsim_port_remote=$((19410+px4_instance))
-	mavlink start -x -u $udp_sihsim_port_local -r 400000 -m custom -o $udp_sihsim_port_remote
-	mavlink stream -r 200 -s HIL_ACTUATOR_CONTROLS -u  $udp_sihsim_port_local
-	mavlink stream -r 25 -s HIL_STATE_QUATERNION -u  $udp_sihsim_port_local
-fi

ROMFS/px4fmu_common/init.d-posix/px4-rc.params

@@ -1,5 +1,5 @@
 #!/bin/sh
 # shellcheck disable=SC2154
 
-#param set-default MAV_SYS_ID $((px4_instance+1))
+#param set MAV_SYS_ID $((px4_instance+1))
-#param set-default IMU_INTEG_RATE 250
+#param set IMU_INTEG_RATE 250

ROMFS/px4fmu_common/init.d-posix/rc.replay

@@ -10,7 +10,7 @@ fi
 
 if [ ! -f replay_params.txt ]; then
 	echo "Creating $(pwd)/replay_params.txt"
-	ulog_params -i "${replay}" -l ' ' | grep -e '^EKF2' > replay_params.txt
+	ulog_params -i "${replay}" -d ' ' | grep -e '^EKF2' > replay_params.txt
 fi
 
 publisher_rules_file="orb_publisher.rules"
@@ -21,7 +21,6 @@ ignore_others: false
 EOF
 
 param set SDLOG_DIRS_MAX 7
-param set SDLOG_PROFILE 3
 
 # apply all params before ekf starts, as some params cannot be changed after startup
 replay tryapplyparams

ROMFS/px4fmu_common/init.d-posix/rcS

@@ -1,7 +1,5 @@
 #!/bin/sh
 
-set -e
-
 # PX4 commands need the 'px4-' prefix in bash.
 # (px4-alias.sh is expected to be in the PATH)
 # shellcheck disable=SC1091
@@ -23,14 +21,16 @@ then
 fi
 
 # initialize script variables
+set AUX_MODE                    none
+set AUX_BANK2			none
 set IO_PRESENT                  no
+set MAV_TYPE                    none
 set MIXER                       none
 set MIXER_AUX                   none
 set MIXER_FILE                  none
 set OUTPUT_MODE                 sim
 set EXTRA_MIXER_MODE            none
 set PWM_OUT                     none
-set PWM_AUX_OUT                 none
 set SDCARD_MIXERS_PATH          etc/mixers
 set USE_IO                      no
 set VEHICLE_TYPE                none
@@ -48,10 +48,10 @@ else
 	# shellcheck disable=SC2012
 	REQUESTED_AUTOSTART=$(ls "${R}etc/init.d-posix/airframes" | sed -n 's/^\([0-9][0-9]*\)_'${PX4_SIM_MODEL}'$/\1/p')
 	if [ -z "$REQUESTED_AUTOSTART" ]; then
-		echo "ERROR  [init] Unknown model $PX4_SIM_MODEL (not found by name on ${R}etc/init.d-posix/airframes)"
+		echo "Error: Unknown model $PX4_SIM_MODEL (not found by name on ${R}etc/init.d-posix/airframes)"
 		exit 1
 	else
-		echo "INFO  [init] found model autostart file as SYS_AUTOSTART=$REQUESTED_AUTOSTART"
+		echo "Info: found model autostart file as SYS_AUTOSTART=$REQUESTED_AUTOSTART"
 	fi
 fi
 
@@ -96,15 +96,15 @@ fi
 
 if param compare SYS_AUTOCONFIG 1
 then
-	# Reset params except Airframe, RC calibration, sensor calibration, flight modes, total flight time, and next flight UUID.
-	param reset_all SYS_AUTOSTART RC* CAL_* COM_FLTMODE* LND_FLIGHT* TC_* COM_FLIGHT*
 	set AUTOCNF yes
+
+	# Wipe out params except RC*, flight modes, total flight time, accel cal, gyro cal, next flight UUID
+	param reset_all SYS_AUTO* RC* COM_FLTMODE* LND_FLIGHT* TC_* CAL_ACC* CAL_GYRO* COM_FLIGHT*
 fi
 
 # multi-instance setup
 # shellcheck disable=SC2154
 param set MAV_SYS_ID $((px4_instance+1))
-param set MNT_MAV_SYSID $((px4_instance+1))
 
 if [ $AUTOCNF = yes ]
 then
@@ -122,9 +122,11 @@ then
 
 	param set SENS_BOARD_X_OFF 0.000001
 	param set SENS_DPRES_OFF 0.001
+
+	param set SYS_RESTART_TYPE 2
 fi
 
-param set-default BAT1_N_CELLS 4
+param set-default BAT_N_CELLS 4
 
 param set-default CBRK_AIRSPD_CHK 0
 param set-default CBRK_SUPPLY_CHK 894281
@@ -146,8 +148,6 @@ param set-default SENS_MAG_MODE 0
 
 param set-default IMU_GYRO_FFT_EN 1
 
-param set-default -s MC_AT_EN 1
-
 # By default log from boot until first disarm.
 param set-default SDLOG_MODE 1
 # enable default, estimator replay and vision/avoidance logging profiles
@@ -156,8 +156,6 @@ param set-default SDLOG_DIRS_MAX 7
 
 param set-default TRIG_INTERFACE 3
 
-param set-default SYS_FAILURE_EN 1
-
 # Adapt timeout parameters if simulation runs faster or slower than realtime.
 if [ -n "$PX4_SIM_SPEED_FACTOR" ]; then
 	COM_DL_LOSS_T_LONGER=$(echo "$PX4_SIM_SPEED_FACTOR * 10" | bc)
@@ -199,6 +197,14 @@ fi
 
 . "$autostart_file"
 
+#
+# If autoconfig parameter was set, reset it and save parameters.
+#
+if [ $AUTOCNF = yes ]
+then
+	param set SYS_AUTOCONFIG 0
+fi
+
 # Simulator IMU data provided at 250 Hz
 param set IMU_INTEG_RATE 250
 
@@ -206,11 +212,8 @@ param set IMU_INTEG_RATE 250
 . px4-rc.params
 
 dataman start
-# start sih in sih_sim mode, otherwise simulator module
-if [ "$SIM_MODE" = "sihsim" ]; then
-	sih start
 # only start the simulator if not in replay mode, as both control the lockstep time
-elif ! replay tryapplyparams
+if ! replay tryapplyparams
 then
   . px4-rc.simulator
 fi
@@ -218,27 +221,14 @@ load_mon start
 battery_simulator start
 tone_alarm start
 rc_update start
-manual_control start
 sensors start
 commander start
-
-# Configure vehicle type specific parameters.
-# Note: rc.vehicle_setup is the entry point for rc.interface,
-#       rc.fw_apps, rc.mc_apps, rc.rover_apps, and rc.vtol_apps.
-#
-. ${R}etc/init.d/rc.vehicle_setup
-
 navigator start
 
-# Try to start the micrortps_client with UDP transport if module exists
-if px4-micrortps_client status > /dev/null 2>&1
-then
-	. px4-rc.rtps
-fi
 
 if param greater -s MNT_MODE_IN -1
 then
-	gimbal start
+	vmount start
 fi
 
 if param greater -s TRIG_MODE 0
@@ -257,11 +247,11 @@ then
 	gyro_calibration start
 fi
 
-# Payload deliverer module if gripper is enabled
+# Configure vehicle type specific parameters.
-if param compare -s PD_GRIPPER_EN 1
+# Note: rc.vehicle_setup is the entry point for rc.interface,
-then
+#       rc.fw_apps, rc.mc_apps, rc.rover_apps, and rc.vtol_apps.
-	payload_deliverer start
+#
-fi
+. ${R}etc/init.d/rc.vehicle_setup
 
 #user defined mavlink streams for instances can be in PATH
 . px4-rc.mavlink

ROMFS/px4fmu_common/init.d/CMakeLists.txt

@@ -39,11 +39,10 @@ px4_add_romfs_files(
 	rc.balloon_apps
 	rc.balloon_defaults
 	rc.boat_defaults
-	rc.autostart_ext
 	rc.fw_apps
 	rc.fw_defaults
-	rc.heli_defaults
 	rc.interface
+	rc.io
 	rc.logging
 	rc.mc_apps
 	rc.mc_defaults
@@ -57,4 +56,5 @@ px4_add_romfs_files(
 	rc.vehicle_setup
 	rc.vtol_apps
 	rc.vtol_defaults
+	rc.ctrlalloc
 )

ROMFS/px4fmu_common/init.d/airframes/1000_rc_fw_easystar.hil

@@ -13,12 +13,12 @@
 # @output MAIN6 gear
 #
 # @maintainer Lorenz Meier <lorenz@px4.io>
-# @board px4_fmu-v2 exclude
 #
 
 . ${R}etc/init.d/rc.fw_defaults
 
-param set-default BAT1_N_CELLS 3
+
+param set-default BAT_N_CELLS 3
 
 param set-default FW_AIRSPD_MAX 20
 param set-default FW_AIRSPD_MIN 12
@@ -29,37 +29,24 @@ param set-default FW_L1_DAMPING 0.74
 param set-default FW_L1_PERIOD 16
 param set-default FW_LND_ANG 15
 param set-default FW_LND_FLALT 5
+param set-default FW_LND_HHDIST 15
+param set-default FW_LND_HVIRT 13
+param set-default FW_LND_TLALT 5
+param set-default FW_THR_LND_MAX 0
 param set-default FW_PR_FF 0.35
+param set-default FW_PR_I 0.1
+param set-default FW_PR_IMAX 0.4
 param set-default FW_PR_P 0.2
 param set-default FW_RR_FF 0.6
+param set-default FW_RR_I 0.1
+param set-default FW_RR_IMAX 0.2
 param set-default FW_RR_P 0.3
 
 param set-default RWTO_TKOFF 1
 
-param set-default CA_AIRFRAME 1
-param set-default CA_ROTOR_COUNT 1
-param set-default CA_ROTOR0_PX 0.3
-param set-default CA_SV_CS_COUNT 4
-param set-default CA_SV_CS0_TRQ_R 0.5
-param set-default CA_SV_CS0_TYPE 2
-param set-default CA_SV_CS1_TRQ_P 1.0
-param set-default CA_SV_CS1_TYPE 3
-param set-default CA_SV_CS2_TRQ_Y 1.0
-param set-default CA_SV_CS2_TYPE 4
-param set-default CA_SV_CS3_TYPE 10
-
-param set-default HIL_ACT_REV 2
-param set-default HIL_ACT_FUNC1 201
-param set-default HIL_ACT_FUNC2 202
-param set-default HIL_ACT_FUNC3 203
-param set-default HIL_ACT_FUNC4 101
-param set-default HIL_ACT_FUNC5 204
-param set-default HIL_ACT_FUNC6 400
 
 param set SYS_HITL 1
 
-param set UAVCAN_ENABLE 0
-
 # disable some checks to allow to fly
 # - with usb
 param set-default CBRK_USB_CHK 197848

ROMFS/px4fmu_common/init.d/airframes/10015_tbs_discovery

@@ -0,0 +1,43 @@
+#!/bin/sh
+#
+# @name Team Blacksheep Discovery
+#
+# @type Quadrotor Wide
+# @class Copter
+#
+# @output MAIN1 motor 1
+# @output MAIN2 motor 2
+# @output MAIN3 motor 3
+# @output MAIN4 motor 4
+# @output MAIN5 feed-through of RC AUX1 channel
+# @output MAIN6 feed-through of RC AUX2 channel
+#
+# @output AUX1 feed-through of RC AUX1 channel
+# @output AUX2 feed-through of RC AUX2 channel
+# @output AUX3 feed-through of RC AUX3 channel
+# @output AUX4 feed-through of RC FLAPS channel
+#
+# @maintainer Lorenz Meier <lorenz@px4.io>
+#
+# @board px4_fmu-v2 exclude
+# @board bitcraze_crazyflie exclude
+#
+
+. ${R}etc/init.d/rc.mc_defaults
+
+
+param set-default MC_ROLL_P 6.5
+param set-default MC_ROLLRATE_P 0.1
+param set-default MC_ROLLRATE_I 0.05
+param set-default MC_ROLLRATE_D 0.0017
+param set-default MC_PITCH_P 6.5
+param set-default MC_PITCHRATE_P 0.14
+param set-default MC_PITCHRATE_I 0.1
+param set-default MC_PITCHRATE_D 0.0025
+param set-default MC_YAW_P 2.8
+param set-default MC_YAWRATE_P 0.28
+param set-default MC_YAWRATE_I 0.1
+param set-default MC_YAWRATE_D 0
+set MIXER quad_w
+
+set PWM_OUT 1234

ROMFS/px4fmu_common/init.d/airframes/10016_3dr_iris

@@ -0,0 +1,45 @@
+#!/bin/sh
+#
+# @name 3DR Iris Quadrotor
+#
+# @type Quadrotor Wide
+# @class Copter
+#
+# @output MAIN1 motor 1
+# @output MAIN2 motor 2
+# @output MAIN3 motor 3
+# @output MAIN4 motor 4
+#
+# @output AUX1 feed-through of RC AUX1 channel
+# @output AUX2 feed-through of RC AUX2 channel
+# @output AUX3 feed-through of RC AUX3 channel
+# @output AUX4 feed-through of RC FLAPS channel
+#
+# @maintainer Lorenz Meier <lorenz@px4.io>
+#
+# @board px4_fmu-v2 exclude
+# @board bitcraze_crazyflie exclude
+#
+
+. ${R}etc/init.d/rc.mc_defaults
+
+
+# TODO tune roll/pitch separately
+param set-default MC_ROLL_P 7
+param set-default MC_ROLLRATE_P 0.15
+param set-default MC_ROLLRATE_I 0.05
+param set-default MC_ROLLRATE_D 0.004
+param set-default MC_PITCH_P 7
+param set-default MC_PITCHRATE_P 0.15
+param set-default MC_PITCHRATE_I 0.05
+param set-default MC_PITCHRATE_D 0.004
+param set-default MC_YAW_P 2.5
+param set-default MC_YAWRATE_P 0.25
+param set-default MC_YAWRATE_I 0.25
+param set-default MC_YAWRATE_D 0
+
+param set-default BAT_V_DIV 12.27559
+param set-default BAT_A_PER_V 15.39103
+set MIXER quad_w
+
+set PWM_OUT 1234

ROMFS/px4fmu_common/init.d/airframes/10017_steadidrone_qu4d

@@ -0,0 +1,45 @@
+#!/bin/sh
+#
+# @name Steadidrone QU4D
+#
+# @type Quadrotor Wide
+# @class Copter
+#
+# @output MAIN1 motor 1
+# @output MAIN2 motor 2
+# @output MAIN3 motor 3
+# @output MAIN4 motor 4
+# @output MAIN5 feed-through of RC AUX1 channel
+# @output MAIN6 feed-through of RC AUX2 channel
+#
+# @output AUX1 feed-through of RC AUX1 channel
+# @output AUX2 feed-through of RC AUX2 channel
+# @output AUX3 feed-through of RC AUX3 channel
+# @output AUX4 feed-through of RC FLAPS channel
+#
+# @maintainer Lorenz Meier <lorenz@px4.io>
+#
+# @board px4_fmu-v2 exclude
+# @board bitcraze_crazyflie exclude
+#
+
+. ${R}etc/init.d/rc.mc_defaults
+
+
+param set-default BAT_N_CELLS 4
+
+param set-default MC_ROLL_P 7
+param set-default MC_ROLLRATE_P 0.13
+param set-default MC_ROLLRATE_I 0.05
+param set-default MC_ROLLRATE_D 0.004
+param set-default MC_PITCH_P 7
+param set-default MC_PITCHRATE_P 0.19
+param set-default MC_PITCHRATE_I 0.05
+param set-default MC_PITCHRATE_D 0.004
+param set-default MC_YAW_P 4
+param set-default MC_YAWRATE_P 0.2
+param set-default MC_YAWRATE_I 0.1
+param set-default MC_YAWRATE_D 0
+set MIXER quad_w
+
+set PWM_OUT 1234

ROMFS/px4fmu_common/init.d/airframes/10018_tbs_endurance

@@ -0,0 +1,50 @@
+#!/bin/sh
+#
+# @name Team Blacksheep Discovery Endurance
+#
+# @type Quadrotor Wide
+# @class Copter
+#
+# @output MAIN1 motor 1
+# @output MAIN2 motor 2
+# @output MAIN3 motor 3
+# @output MAIN4 motor 4
+# @output MAIN5 feed-through of RC AUX1 channel
+# @output MAIN6 feed-through of RC AUX2 channel
+#
+# @output AUX1 feed-through of RC AUX1 channel
+# @output AUX2 feed-through of RC AUX2 channel
+# @output AUX3 feed-through of RC AUX3 channel
+# @output AUX4 feed-through of RC FLAPS channel
+#
+# @maintainer Simon Wilks <simon@uaventure.com>
+#
+# @board px4_fmu-v2 exclude
+# @board bitcraze_crazyflie exclude
+#
+
+. ${R}etc/init.d/rc.mc_defaults
+
+
+param set-default BAT_N_CELLS 6
+param set-default BAT_V_EMPTY 3.5
+
+param set-default MC_ROLL_P 7
+param set-default MC_ROLLRATE_P 0.08
+param set-default MC_ROLLRATE_I 0.02
+param set-default MC_ROLLRATE_D 0.003
+param set-default MC_PITCH_P 7
+param set-default MC_PITCHRATE_P 0.13
+param set-default MC_PITCHRATE_I 0.02
+param set-default MC_PITCHRATE_D 0.005
+param set-default MC_YAW_P 2.8
+param set-default MC_YAWRATE_P 0.2
+param set-default MC_YAWRATE_I 0.1
+param set-default MC_YAWRATE_D 0
+
+param set-default MPC_XY_VEL_MAX 2
+
+param set-default PWM_MAIN_MIN 1080
+set MIXER quad_w
+
+set PWM_OUT 1234

ROMFS/px4fmu_common/init.d/airframes/1001_rc_quad_x.hil

@@ -6,34 +6,15 @@
 # @class Copter
 #
 # @maintainer Lorenz Meier <lorenz@px4.io>
-# @board px4_fmu-v2 exclude
 #
 
 . ${R}etc/init.d/rc.mc_defaults
 
 set MIXER quad_x
+set PWM_OUT 1234
 
 param set SYS_HITL 1
 
-param set UAVCAN_ENABLE 0
-
-param set-default CA_ROTOR_COUNT 4
-param set-default CA_ROTOR0_PX 0.15
-param set-default CA_ROTOR0_PY 0.15
-param set-default CA_ROTOR1_PX -0.15
-param set-default CA_ROTOR1_PY -0.15
-param set-default CA_ROTOR2_PX 0.15
-param set-default CA_ROTOR2_PY -0.15
-param set-default CA_ROTOR2_KM -0.05
-param set-default CA_ROTOR3_PX -0.15
-param set-default CA_ROTOR3_PY 0.15
-param set-default CA_ROTOR3_KM -0.05
-
-param set-default HIL_ACT_FUNC1 101
-param set-default HIL_ACT_FUNC2 102
-param set-default HIL_ACT_FUNC3 103
-param set-default HIL_ACT_FUNC4 104
-
 # disable some checks to allow to fly
 # - with usb
 param set-default CBRK_USB_CHK 197848

ROMFS/px4fmu_common/init.d/airframes/1002_standard_vtol.hil

@@ -9,18 +9,19 @@
 #
 # @board px4_fmu-v2 exclude
 # @board bitcraze_crazyflie exclude
-# @board holybro_kakutef7 exclude
 #
 
 . ${R}etc/init.d/rc.vtol_defaults
 
 
-param set-default BAT1_N_CELLS 3
+param set-default BAT_N_CELLS 3
 
 param set-default COM_RC_IN_MODE 1
 
+param set-default EKF2_AID_MASK 1
 param set-default EKF2_ANGERR_INIT 0.01
 param set-default EKF2_GBIAS_INIT 0.01
+param set-default EKF2_HGT_MODE 0
 param set-default EKF2_MAG_TYPE 1
 
 param set-default FW_AIRSPD_MAX 25
@@ -45,56 +46,26 @@ param set-default MPC_XY_VEL_I_ACC 4
 param set-default MPC_XY_VEL_P_ACC 3
 param set-default MPC_Z_VEL_P_ACC 12
 param set-default MPC_Z_VEL_I_ACC 3
+param set-default MPC_Z_VEL_MAX_DN 1.5
 
 param set-default NAV_ACC_RAD 5
 param set-default NAV_DLL_ACT 2
+param set-default NAV_LOITER_RAD 80
 
 param set-default RTL_DESCEND_ALT 10
 param set-default RTL_RETURN_ALT 30
 
 param set-default SDLOG_DIRS_MAX 7
+param set-default SYS_RESTART_TYPE 2
 
 param set-default VT_F_TRANS_THR 0.75
 param set-default VT_MOT_ID 1234
 param set-default VT_FW_MOT_OFFID 1234
 param set-default VT_TYPE 2
 
-param set-default CA_AIRFRAME 2
-param set-default CA_ROTOR_COUNT 5
-param set-default CA_ROTOR0_PX 0.15
-param set-default CA_ROTOR0_PY 0.15
-param set-default CA_ROTOR1_PX -0.15
-param set-default CA_ROTOR1_PY -0.15
-param set-default CA_ROTOR2_PX 0.15
-param set-default CA_ROTOR2_PY -0.15
-param set-default CA_ROTOR2_KM -0.05
-param set-default CA_ROTOR3_PX -0.15
-param set-default CA_ROTOR3_PY 0.15
-param set-default CA_ROTOR3_KM -0.05
-param set-default CA_ROTOR4_AX 1.0
-param set-default CA_ROTOR4_AZ 0.0
-param set-default CA_ROTOR4_PX 0.2
-
-param set-default CA_SV_CS_COUNT 3
-param set-default CA_SV_CS1_TRQ_R 0.5
-param set-default CA_SV_CS1_TYPE 2
-param set-default CA_SV_CS2_TRQ_P 1.0
-param set-default CA_SV_CS2_TYPE 3
-
-param set-default HIL_ACT_FUNC1 101
-param set-default HIL_ACT_FUNC2 102
-param set-default HIL_ACT_FUNC3 103
-param set-default HIL_ACT_FUNC4 104
-param set-default HIL_ACT_FUNC5 105
-param set-default HIL_ACT_FUNC6 201
-param set-default HIL_ACT_FUNC7 202
-param set-default HIL_ACT_FUNC8 203
-
 
 param set SYS_HITL 1
 
-param set UAVCAN_ENABLE 0
-
 # disable some checks to allow to fly
 # - with usb
 param set-default CBRK_USB_CHK 197848
@@ -104,7 +75,7 @@ param set-default CBRK_SUPPLY_CHK 894281
 param set-default COM_PREARM_MODE 0
 param set-default CBRK_IO_SAFETY 22027
 
-param set-default MAV_TYPE 22
+set MAV_TYPE 22
 
 set MIXER standard_vtol_hitl