WIP: in tree Dockerfile and github actions push to github registry

2026-05-26 02:27:35 +08:00 · 2021-05-06 15:08:03 -04:00
432 changed files with 2390 additions and 13282 deletions
@@ -48,8 +48,6 @@ pipeline {
                     "cuav_x7pro_default",
                     "cubepilot_cubeorange_default",
                     "cubepilot_cubeyellow_default",
-                     "freefly_can-rtk-gps_canbootloader",
-                     "freefly_can-rtk-gps_default",
                     "holybro_can-gps-v1_canbootloader",
                     "holybro_can-gps-v1_default",
                     "holybro_durandal-v1_default",
@@ -57,7 +55,6 @@ pipeline {
                     "holybro_pix32v5_default",
                     "modalai_fc-v1_default",
                     "modalai_fc-v1_rtps",
-                     "modalai_fc-v2_default",
                     "mro_ctrl-zero-f7_default",
                     "mro_ctrl-zero-f7-oem_default",
                     "mro_ctrl-zero-h7_default",
@@ -133,7 +130,7 @@ pipeline {
    // TODO: actually upload artifacts to S3
    // stage('S3 Upload') {
    //   agent {
-    //     docker { image 'px4io/px4-dev-base-focal:2021-04-29' }
+    //     docker { image 'ghcr.io/px4/px4-dev:2021-05-06' }
    //   }
    //   options {
    //         skipDefaultCheckout()
@@ -158,7 +155,7 @@ pipeline {
  }
  options {
    buildDiscarder(logRotator(numToKeepStr: '5', artifactDaysToKeepStr: '14'))
-    timeout(time: 90, unit: 'MINUTES')
+    timeout(time: 60, unit: 'MINUTES')
  }
 }

@@ -73,10 +73,13 @@ pipeline {
                }
                stage("reset") {
                  steps {
-                    cleanupFTDI()
+                    cleanupFTDI();
                  }
                }
              }
+              options {
+                timeout(time: 90, unit: 'MINUTES')
+              }
            } // stage test
          }
        }
@@ -146,10 +149,13 @@ pipeline {
                }
                stage("reset") {
                  steps {
-                    cleanupFTDI()
+                    cleanupFTDI();
                  }
                }
              }
+              options {
+                timeout(time: 90, unit: 'MINUTES')
+              }
            } // stage test
          }
        }
@@ -219,10 +225,13 @@ pipeline {
                }
                stage("reset") {
                  steps {
-                    cleanupFTDI()
+                    cleanupFTDI();
                  }
                }
              }
+              options {
+                timeout(time: 90, unit: 'MINUTES')
+              }
            } // stage test
          }
        }
@@ -292,10 +301,13 @@ pipeline {
                }
                stage("reset") {
                  steps {
-                    cleanupFTDI()
+                    cleanupFTDI();
                  }
                }
              }
+              options {
+                timeout(time: 90, unit: 'MINUTES')
+              }
            } // stage test
          }
        }
@@ -365,10 +377,13 @@ pipeline {
                }
                stage("reset") {
                  steps {
-                    cleanupFTDI()
+                    cleanupFTDI();
                  }
                }
              }
+              options {
+                timeout(time: 90, unit: 'MINUTES')
+              }
            } // stage test
          }
        }
@@ -438,10 +453,13 @@ pipeline {
                }
                stage("reset") {
                  steps {
-                    cleanupFTDI()
+                    cleanupFTDI();
                  }
                }
              }
+              options {
+                timeout(time: 90, unit: 'MINUTES')
+              }
            } // stage test
          }
        }
@@ -515,10 +533,13 @@ pipeline {
                }
                stage("reset") {
                  steps {
-                    cleanupFTDI()
+                    cleanupFTDI();
                  }
                }
              }
+              options {
+                timeout(time: 90, unit: 'MINUTES')
+              }
            } // stage test
          }
        }
@@ -588,10 +609,13 @@ pipeline {
                }
                stage("reset") {
                  steps {
-                    cleanupFTDI()
+                    cleanupFTDI();
                  }
                }
              }
+              options {
+                timeout(time: 90, unit: 'MINUTES')
+              }
            } // stage test
          }
        }
@@ -665,10 +689,13 @@ pipeline {
                }
                stage("reset") {
                  steps {
-                    cleanupFTDI()
+                    cleanupFTDI();
                  }
                }
              }
+              options {
+                timeout(time: 90, unit: 'MINUTES')
+              }
            } // stage test
          }
        }
@@ -742,6 +769,9 @@ pipeline {
                  }
                }
              }
+              options {
+                timeout(time: 90, unit: 'MINUTES')
+              }
            } // stage test
          }
        }
@@ -812,10 +842,13 @@ pipeline {
                }
                stage("reset") {
                  steps {
-                    cleanupFTDI()
+                    cleanupFTDI();
                  }
                }
              }
+              options {
+                timeout(time: 90, unit: 'MINUTES')
+              }
            } // stage test
          }
        }
@@ -885,10 +918,13 @@ pipeline {
                }
                stage("reset") {
                  steps {
-                    cleanupFTDI()
+                    cleanupFTDI();
                  }
                }
              }
+              options {
+                timeout(time: 90, unit: 'MINUTES')
+              }
            } // stage test
          }
        }
@@ -901,8 +937,8 @@ pipeline {
    CI = true
  }
  options {
-    buildDiscarder(logRotator(numToKeepStr: '30', artifactDaysToKeepStr: '60'))
-    timeout(time: 120, unit: 'MINUTES')
+    buildDiscarder(logRotator(numToKeepStr: '20', artifactDaysToKeepStr: '40'))
+    timeout(time: 90, unit: 'MINUTES')
    skipDefaultCheckout()
  }
 }
@@ -28,7 +28,7 @@ jobs:
          "parameters_metadata",
        ]
    container:
-      image: px4io/px4-dev-nuttx-focal:2021-04-29
+      image: ghcr.io/px4/px4-dev:2021-05-06
      options: --privileged --ulimit core=-1 --security-opt seccomp=unconfined
    steps:
    - uses: actions/checkout@v1
@@ -4,6 +4,7 @@ on:
  push:
    branches:
    - 'master'
+    - 'github-actions'
  pull_request:
    branches:
    - '*'
@@ -11,7 +12,7 @@ on:
 jobs:
  build:
    runs-on: ubuntu-latest
-    container: px4io/px4-dev-nuttx-focal:2021-04-29
+    container: ghcr.io/px4/px4-dev:2021-05-06
    strategy:
      matrix:
        config: [
@@ -19,9 +20,6 @@ jobs:
          ark_can-flow_canbootloader,
          ark_can-flow_debug,
          ark_can-flow_default,
-          ark_can-gps_canbootloader,
-          ark_can-gps_debug,
-          ark_can-gps_default,
          av_x-v1_default,
          bitcraze_crazyflie21_default,
          bitcraze_crazyflie_default,
@@ -35,8 +33,6 @@ jobs:
          cubepilot_cubeyellow_default,
          cubepilot_cubeyellow_test,
          cubepilot_io-v2_default,
-          freefly_can-rtk-gps_canbootloader,
-          freefly_can-rtk-gps_default,
          holybro_can-gps-v1_canbootloader,
          holybro_can-gps-v1_debug,
          holybro_can-gps-v1_default,
@@ -45,7 +41,6 @@ jobs:
          holybro_pix32v5_default,
          modalai_fc-v1_default,
          modalai_fc-v1_rtps,
-          modalai_fc-v2_default,
          mro_ctrl-zero-f7-oem_default,
          mro_ctrl-zero-f7_default,
          mro_ctrl-zero-h7-oem_default,
@@ -11,13 +11,12 @@ on:
 jobs:
  build:
    runs-on: ubuntu-latest
-    container: px4io/px4-dev-nuttx-focal:2021-04-29
+    container: ghcr.io/px4/px4-dev:2021-05-06
    strategy:
      matrix:
        config: [
          ark_can-flow_default,
          cuav_can-gps-v1_default,
-          freefly_can-rtk-gps_default,
          holybro_can-gps-v1_default,
          #nxp_ucans32k146_default,
          px4_fmu-v4_cannode
@@ -0,0 +1,31 @@
+name: Build and publish Docker image
+
+on:
+  push:
+    branches:
+    - 'master'
+    - 'github-actions'
+
+jobs:
+  docker:
+    runs-on: ubuntu-latest
+    steps:
+      - name: Login to GitHub Container Registry
+        uses: docker/login-action@v1
+        with:
+          registry: ghcr.io
+          username: ${{ github.repository_owner }}
+          password: ${{ secrets.GITHUB_TOKEN }}
+
+      - name: Build and push
+        uses: docker/build-push-action@v2
+        with:
+          context: .
+          platforms: linux/amd64
+          push: true
+          tags: |
+            px4/px4-dev:latest
+            ghcr.io/px4/px4-dev:latest
+
+      - name: Image digest
+        run: echo ${{ steps.docker_build.outputs.digest }}
@@ -11,7 +11,7 @@ jobs:

  airframe:
    runs-on: ubuntu-latest
-    container: px4io/px4-dev-base-focal:2021-04-29
+    container: ghcr.io/px4/px4-dev:2021-05-06
    steps:
    - uses: actions/checkout@v1
      with:
@@ -26,7 +26,7 @@ jobs:

  module:
    runs-on: ubuntu-latest
-    container: px4io/px4-dev-base-focal:2021-04-29
+    container: ghcr.io/px4/px4-dev:2021-05-06
    steps:
    - uses: actions/checkout@v1
      with:
@@ -41,7 +41,7 @@ jobs:

  parameter:
    runs-on: ubuntu-latest
-    container: px4io/px4-dev-base-focal:2021-04-29
+    container: ghcr.io/px4/px4-dev:2021-05-06
    steps:
    - uses: actions/checkout@v1
      with:
@@ -65,7 +65,7 @@ jobs:

  uorb_graph:
    runs-on: ubuntu-latest
-    container: px4io/px4-dev-nuttx-focal:2021-04-29
+    container: ghcr.io/px4/px4-dev:2021-05-06
    steps:
    - uses: actions/checkout@v1
      with:
@@ -80,7 +80,7 @@ jobs:

  micrortps_agent:
    runs-on: ubuntu-latest
-    container: px4io/px4-dev-base-focal:2021-04-29
+    container: ghcr.io/px4/px4-dev:2021-05-06
    steps:
    - uses: actions/checkout@v1
      with:
@@ -94,7 +94,7 @@ jobs:

  ROS_msgs:
    runs-on: ubuntu-latest
-    container: px4io/px4-dev-base-focal:2021-04-29
+    container: ghcr.io/px4/px4-dev:2021-05-06
    steps:
    - uses: actions/checkout@v1
      with:
@@ -107,7 +107,7 @@ jobs:

  ROS2_bridge:
    runs-on: ubuntu-latest
-    container: px4io/px4-dev-base-focal:2021-04-29
+    container: ghcr.io/px4/px4-dev:2021-05-06
    steps:
    - uses: actions/checkout@v1
      with:
@@ -65,5 +65,5 @@
 	url = https://github.com/UAVCAN/libcanard.git
 [submodule "src/drivers/uavcan_v1/legacy_data_types"]
 	path = src/drivers/uavcan_v1/legacy_data_types
-	url = https://github.com/PX4/public_regulated_data_types.git
+	url = https://github.com/px4/public_regulated_data_types/
 	branch = legacy
@@ -66,16 +66,6 @@ CONFIG:
      buildType: MinSizeRel
      settings:
        CONFIG: ark_can-flow_canbootloader
-    ark_can-gps_default:
-      short: ark_can-gps_default
-      buildType: MinSizeRel
-      settings:
-        CONFIG: ark_can-gps_default
-    ark_can-gps_canbootloader:
-      short: ark_can-gps_canbootloader
-      buildType: MinSizeRel
-      settings:
-        CONFIG: ark_can-gps_canbootloader
    av_x-v1_default:
      short: av_x-v1
      buildType: MinSizeRel
@@ -116,16 +106,6 @@ CONFIG:
      buildType: MinSizeRel
      settings:
        CONFIG: emlid_navio2_default
-    freefly_can-rtk-gps_default:
-      short: freefly_can-rtk-gps_default
-      buildType: MinSizeRel
-      settings:
-        CONFIG: freefly_can-rtk-gps_default
-    freefly_can-rtk-gps_canbootloader:
-      short: freefly_can-rtk-gps_canbootloader
-      buildType: MinSizeRel
-      settings:
-        CONFIG: freefly_can-rtk-gps_canbootloader
    holybro_can-gps-v1_canbootloader:
      short: holybro_can-gps-v1_canbootloader
      buildType: MinSizeRel
@@ -146,11 +126,6 @@ CONFIG:
      buildType: MinSizeRel
      settings:
        CONFIG: modalai_fc-v1_default
-    modalai_fc-v2_default:
-      short: modalai_fc-v2
-      buildType: MinSizeRel
-      settings:
-        CONFIG: modalai_fc-v2_default
    mro_ctrl-zero-f7_default:
      short: mro_ctrl-zero-f7
      buildType: MinSizeRel
@@ -0,0 +1,29 @@
+#
+# PX4 development environment
+#
+
+FROM ubuntu:20.04
+LABEL maintainer="Daniel Agar <daniel@agar.ca>"
+
+COPY Tools/setup/ubuntu.sh /tmp/ubuntu.sh
+COPY Tools/setup/requirements.txt /tmp/requirements.txt
+RUN DEBIAN_FRONTEND=noninteractive /tmp/ubuntu.sh --no-sim-tools \
+	&& apt-get -y autoremove \
+	&& apt-get clean autoclean \
+	&& rm -rf /var/lib/apt/lists/{apt,dpkg,cache,log} /tmp/* /var/tmp/*
+
+# create user with id 1001 (jenkins docker workflow default)
+RUN useradd --shell /bin/bash -u 1001 -c "" -m user && usermod -a -G dialout user
+
+ENV CCACHE_UMASK=000
+ENV PATH="/usr/lib/ccache:$PATH"
+
+# SITL UDP PORTS
+EXPOSE 14556/udp
+EXPOSE 14557/udp
+
+# create and start as LOCAL_USER_ID
+COPY Tools/setup/entrypoint.sh /usr/local/bin/entrypoint.sh
+ENTRYPOINT ["/usr/local/bin/entrypoint.sh"]
+
+CMD ["/bin/bash"]
@@ -85,7 +85,7 @@ pipeline {

        stage('Airframe') {
          agent {
-            docker { image 'px4io/px4-dev-base-focal:2021-04-29' }
+            docker { image 'ghcr.io/px4/px4-dev:2021-05-06' }
          }
          steps {
            sh 'make distclean'
@@ -105,7 +105,7 @@ pipeline {

        stage('Parameter') {
          agent {
-            docker { image 'px4io/px4-dev-base-focal:2021-04-29' }
+            docker { image 'ghcr.io/px4/px4-dev:2021-05-06' }
          }
          steps {
            sh 'make distclean'
@@ -125,7 +125,7 @@ pipeline {

        stage('Module') {
          agent {
-            docker { image 'px4io/px4-dev-base-focal:2021-04-29' }
+            docker { image 'ghcr.io/px4/px4-dev:2021-05-06' }
          }
          steps {
            sh 'make distclean'
@@ -176,7 +176,7 @@ pipeline {

        stage('Userguide') {
          agent {
-            docker { image 'px4io/px4-dev-base-focal:2021-04-29' }
+            docker { image 'ghcr.io/px4/px4-dev:2021-05-06' }
          }
          steps {
            sh('export')
@@ -206,7 +206,7 @@ pipeline {

        stage('QGroundControl') {
          agent {
-            docker { image 'px4io/px4-dev-base-focal:2021-04-29' }
+            docker { image 'ghcr.io/px4/px4-dev:2021-05-06' }
          }
          steps {
            sh('export')
@@ -234,7 +234,7 @@ pipeline {

        stage('microRTPS agent') {
          agent {
-            docker { image 'px4io/px4-dev-base-focal:2021-04-29' }
+            docker { image 'ghcr.io/px4/px4-dev:2021-05-06' }
          }
          steps {
            sh('export')
@@ -264,7 +264,7 @@ pipeline {

        stage('PX4 ROS msgs') {
          agent {
-            docker { image 'px4io/px4-dev-base-focal:2021-04-29' }
+            docker { image 'ghcr.io/px4/px4-dev:2021-05-06' }
          }
          steps {
            sh('export')
@@ -293,7 +293,7 @@ pipeline {

        stage('PX4 ROS2 bridge') {
          agent {
-            docker { image 'px4io/px4-dev-base-focal:2021-04-29' }
+            docker { image 'ghcr.io/px4/px4-dev:2021-05-06' }
          }
          steps {
            sh('export')
@@ -336,7 +336,7 @@ pipeline {

        stage('S3') {
          agent {
-            docker { image 'px4io/px4-dev-base-focal:2021-04-29' }
+            docker { image 'ghcr.io/px4/px4-dev:2021-05-06' }
          }
          steps {
            sh('export')
@@ -374,7 +374,7 @@ pipeline {
    GIT_COMMITTER_NAME = "PX4BuildBot"
  }
  options {
-    buildDiscarder(logRotator(numToKeepStr: '20', artifactDaysToKeepStr: '30'))
-    timeout(time: 90, unit: 'MINUTES')
+    buildDiscarder(logRotator(numToKeepStr: '10', artifactDaysToKeepStr: '20'))
+    timeout(time: 60, unit: 'MINUTES')
  }
 }
@@ -468,27 +468,26 @@ validate_module_configs:
 .PHONY: clean submodulesclean submodulesupdate gazeboclean distclean

 clean:
-	@[ ! -d "$(SRC_DIR)/build" ] || find "$(SRC_DIR)/build" -mindepth 1 -maxdepth 1 -type d -exec sh -c "echo {}; cmake --build {} -- clean || rm -rf {}" \; # use generated build system to clean, wipe build directory if it fails
-	@git submodule foreach git clean -dX --force # some submodules generate build artifacts in source
+	@rm -rf "$(SRC_DIR)"/build
+	@git submodule foreach git clean -df

 submodulesclean:
 	@git submodule foreach --quiet --recursive git clean -ff -x -d
 	@git submodule update --quiet --init --recursive --force || true
 	@git submodule sync --recursive
-	@git submodule update --init --recursive --force --jobs 4
+	@git submodule update --init --recursive --force

 submodulesupdate:
-	@git submodule update --quiet --init --recursive --jobs 4 || true
+	@git submodule update --quiet --init --recursive || true
 	@git submodule sync --recursive
-	@git submodule update --init --recursive --jobs 4
+	@git submodule update --init --recursive

 gazeboclean:
 	@rm -rf ~/.gazebo/*

 distclean: gazeboclean
-	@git submodule deinit --force $(SRC_DIR)
-	@rm -rf "$(SRC_DIR)/build"
-	@git clean --force -X "$(SRC_DIR)/msg/" "$(SRC_DIR)/platforms/" "$(SRC_DIR)/posix-configs/" "$(SRC_DIR)/ROMFS/" "$(SRC_DIR)/src/" "$(SRC_DIR)/test/" "$(SRC_DIR)/Tools/"
+	@git submodule deinit -f .
+	@git clean -ff -x -d -e ".cproject" -e ".idea" -e ".project" -e ".settings" -e ".vscode"

 # Help / Error
 # --------------------------------------------------------------------
@@ -115,7 +115,6 @@ add_custom_command(
 set(romfs_extract_stamp ${CMAKE_CURRENT_BINARY_DIR}/romfs_extract.stamp)
 add_custom_command(
 	OUTPUT ${romfs_extract_stamp}
-	COMMAND ${CMAKE_COMMAND} -E remove_directory ${romfs_gen_root_dir}/*
 	COMMAND ${CMAKE_COMMAND} -E tar xf ${romfs_tar_file}
 	COMMAND ${CMAKE_COMMAND} -E touch ${romfs_extract_stamp}
 	WORKING_DIRECTORY ${romfs_gen_root_dir}
@@ -14,8 +14,7 @@

 param set-default EKF2_ARSP_THR 8
 param set-default EKF2_FUSE_BETA 1
-
-param set-default FW_AIRSPD_STALL 8
+param set-default ASPD_STALL 10.0

 param set-default FW_P_RMAX_NEG 20.0
 param set-default FW_P_RMAX_POS 60.0
@@ -30,7 +30,7 @@ set FRC /fs/microsd/etc/rc.txt
 set IOFW "/etc/extras/px4_io-v2_default.bin"
 set IO_PRESENT no
 set LOGGER_ARGS ""
-set LOGGER_BUF 8
+set LOGGER_BUF  14
 set MAV_TYPE none
 set MIXER none
 set MIXER_AUX none
@@ -2,10 +2,7 @@

 if [ -z ${PX4_DOCKER_REPO+x} ]; then
 	echo "guessing PX4_DOCKER_REPO based on input";
-	if [[ $@ =~ .*px4_fmu.* ]]; then
-		# nuttx-px4fmu-v{1,2,3,4,5}
-		PX4_DOCKER_REPO="px4io/px4-dev-nuttx-focal:2021-04-29"
-	elif [[ $@ =~ .*navio2.* ]] || [[ $@ =~ .*raspberry.* ]] || [[ $@ =~ .*beaglebone.* ]] || [[ $@ =~ .*pilotpi.default ]]; then
+	if [[ $@ =~ .*navio2.* ]] || [[ $@ =~ .*raspberry.* ]] || [[ $@ =~ .*beaglebone.* ]] || [[ $@ =~ .*pilotpi.default ]]; then
 		# beaglebone_blue_default, emlid_navio2_default, px4_raspberrypi_default, scumaker_pilotpi_default
 		PX4_DOCKER_REPO="px4io/px4-dev-armhf:2021-02-04"
 	elif [[ $@ =~ .*pilotpi.arm64 ]]; then
@@ -30,7 +27,7 @@ fi

 # otherwise default to nuttx
 if [ -z ${PX4_DOCKER_REPO+x} ]; then
-	PX4_DOCKER_REPO="px4io/px4-dev-nuttx-focal:2021-04-29"
+	PX4_DOCKER_REPO="ghcr.io/px4/px4-dev:2021-05-06"
 fi

 # docker hygiene
@@ -67,4 +64,5 @@ docker run -it --rm -w "${SRC_DIR}" \
 	--publish 14556:14556/udp \
 	--volume=${CCACHE_DIR}:${CCACHE_DIR}:rw \
 	--volume=${SRC_DIR}:${SRC_DIR}:rw \
+	-v /tmp/.X11-unix:/tmp/.X11-unix -e DISPLAY=$DISPLAY -h $HOSTNAME
 	${PX4_DOCKER_REPO} /bin/bash -c "$1 $2 $3"
@@ -56,6 +56,7 @@ from __future__ import print_function
 import sys
 import argparse
 import binascii
+import serial
 import socket
 import struct
 import json
@@ -67,16 +68,6 @@ import os

 from sys import platform as _platform

-try:
-    import serial
-except ImportError as e:
-    print("Failed to import serial: " + str(e))
-    print("")
-    print("You may need to install it using:")
-    print("    pip3 install --user pyserial")
-    print("")
-    sys.exit(1)
-
 # Detect python version
 if sys.version_info[0] < 3:
    runningPython3 = False
@@ -735,6 +726,29 @@ def main():
        print("WARNING: You should uninstall ModemManager as it conflicts with any non-modem serial device (like Pixhawk)")
        print("==========================================================================================================")

+    # We need to check for pyserial because the import itself doesn't
+    # seem to fail, at least not on macOS.
+    pyserial_installed = False
+    try:
+        if serial.__version__:
+            pyserial_installed = True
+    except:
+        pass
+
+    try:
+        if serial.VERSION:
+            pyserial_installed = True
+    except:
+        pass
+
+    if not pyserial_installed:
+        print("Error: pyserial not installed!")
+        print("")
+        print("You may need to install it using:")
+        print("    pip3 install --user pyserial")
+        print("")
+        sys.exit(1)
+
    # Load the firmware file
    fw = firmware(args.firmware)

@@ -0,0 +1,11 @@
+.PHONY: docker_build docker_push all
+
+DATE := $(shell date +%Y-%m-%d)
+
+docker_build:
+	docker build -f Dockerfile -t px4-dev:${DATE} .
+
+docker_push: build
+        docker push px4io/px4-dev:${DATE}
+
+all: docker_build
@@ -0,0 +1,27 @@
+#!/bin/bash
+
+# Start virtual X server in the background
+# - DISPLAY default is :99, set in dockerfile
+# - Users can override with `-e DISPLAY=` in `docker run` command to avoid
+#   running Xvfb and attach their screen
+if [[ -x "$(command -v Xvfb)" && "$DISPLAY" == ":99" ]]; then
+	echo "Starting Xvfb"
+	Xvfb :99 -screen 0 1600x1200x24+32 &
+fi
+
+# Check if the ROS_DISTRO is passed and use it
+# to source the ROS environment
+if [ -n "${ROS_DISTRO}" ]; then
+	source "/opt/ros/$ROS_DISTRO/setup.bash"
+fi
+
+# Use the LOCAL_USER_ID if passed in at runtime
+if [ -n "${LOCAL_USER_ID}" ]; then
+	echo "Starting with UID : $LOCAL_USER_ID"
+	# modify existing user's id
+	usermod -u $LOCAL_USER_ID user
+	# run as user
+	exec gosu user "$@"
+else
+	exec "$@"
+fi
@@ -1,24 +1,26 @@
 argcomplete
-argparse>=1.2
+argparse
 cerberus
 coverage
 empy>=3.3
 jinja2>=2.8
+jsonschema
+kconfiglib
 matplotlib>=3.0.*
 numpy>=1.13
 nunavut>=1.1.0
 packaging
-pandas>=0.21
 pkgconfig
 psutil
 pygments
-wheel>=0.31.1
 pymavlink
 pyros-genmsg
-pyserial
+pyserial>=3.0
 pyulog>=0.5.0
 pyyaml
 requests
+serial
 setuptools>=39.2.0
 six>=1.12.0
 toml>=0.9
+wheel>=0.31.1
@@ -31,10 +31,9 @@ done
 # detect if running in docker
 if [ -f /.dockerenv ]; then
 	echo "Running within docker, installing initial dependencies";
-	apt-get --quiet -y update && DEBIAN_FRONTEND=noninteractive apt-get --quiet -y install \
+	apt-get -qq update && DEBIAN_FRONTEND=noninteractive apt-get -q -y --no-install-recommends install \
 		ca-certificates \
-		gnupg \
-		lsb-core \
+		gosu \
 		sudo \
 		wget \
 		;
@@ -53,7 +52,7 @@ fi

 # check ubuntu version
 # otherwise warn and point to docker?
-UBUNTU_RELEASE="`lsb_release -rs`"
+UBUNTU_RELEASE=$(cat /etc/os-release | grep VERSION_ID | cut -d "\"" -f 2)

 if [[ "${UBUNTU_RELEASE}" == "14.04" ]]; then
 	echo "Ubuntu 14.04 is no longer supported"
@@ -63,16 +62,18 @@ elif [[ "${UBUNTU_RELEASE}" == "16.04" ]]; then
 	exit 1
 elif [[ "${UBUNTU_RELEASE}" == "18.04" ]]; then
 	echo "Ubuntu 18.04"
+
 elif [[ "${UBUNTU_RELEASE}" == "20.04" ]]; then
 	echo "Ubuntu 20.04"
+
 fi


 echo
 echo "Installing PX4 general dependencies"

-sudo apt-get update -y --quiet
-sudo DEBIAN_FRONTEND=noninteractive apt-get -y --quiet --no-install-recommends install \
+sudo apt-get -qq update
+sudo DEBIAN_FRONTEND=noninteractive apt-get -q -y --no-install-recommends install \
 	astyle \
 	build-essential \
 	ccache \
@@ -93,20 +94,23 @@ sudo DEBIAN_FRONTEND=noninteractive apt-get -y --quiet --no-install-recommends i
 	python3-wheel \
 	rsync \
 	shellcheck \
-	unzip \
-	zip \
 	;

 if [[ "${UBUNTU_RELEASE}" == "16.04" ]]; then
 	echo "Installing Ubuntu 16.04 PX4-compatible ccache version"
-	wget -O /tmp/ccache_3.4.1-1_amd64.deb http://launchpadlibrarian.net/356662933/ccache_3.4.1-1_amd64.deb
+	wget -q -O /tmp/ccache_3.4.1-1_amd64.deb http://launchpadlibrarian.net/356662933/ccache_3.4.1-1_amd64.deb
 	sudo dpkg -i /tmp/ccache_3.4.1-1_amd64.deb
 fi

 # Python3 dependencies
 echo
 echo "Installing PX4 Python3 dependencies"
-python3 -m pip install --user -r ${DIR}/requirements.txt
+if [ -f /.dockerenv ]; then
+	# system wide for docker
+	python3 -m pip install -r ${DIR}/requirements.txt
+else
+	python3 -m pip install --user --quiet -r ${DIR}/requirements.txt
+fi

 # NuttX toolchain (arm-none-eabi-gcc)
 if [[ $INSTALL_NUTTX == "true" ]]; then
@@ -114,33 +118,13 @@ if [[ $INSTALL_NUTTX == "true" ]]; then
 	echo
 	echo "Installing NuttX dependencies"

-	sudo DEBIAN_FRONTEND=noninteractive apt-get -y --quiet --no-install-recommends install \
-		automake \
-		binutils-dev \
-		bison \
-		build-essential \
-		flex \
+	sudo DEBIAN_FRONTEND=noninteractive apt-get -q -y --no-install-recommends install \
 		g++-multilib \
 		gcc-multilib \
 		gdb-multiarch \
 		genromfs \
-		gettext \
-		gperf \
-		kconfig-frontends \
-		libelf-dev \
-		libexpat-dev \
-		libgmp-dev \
-		libisl-dev \
-		libmpc-dev \
-		libmpfr-dev \
-		libncurses5-dev \
-		libncursesw5-dev \
-		libtool \
 		pkg-config \
 		screen \
-		texinfo \
-		u-boot-tools \
-		util-linux \
 		vim-common \
 		;

@@ -164,7 +148,7 @@ if [[ $INSTALL_NUTTX == "true" ]]; then

 	else
 		echo "Installing arm-none-eabi-gcc-${NUTTX_GCC_VERSION}";
-		wget -O /tmp/gcc-arm-none-eabi-${NUTTX_GCC_VERSION}-linux.tar.bz2 https://armkeil.blob.core.windows.net/developer/Files/downloads/gnu-rm/${NUTTX_GCC_VERSION_SHORT}/gcc-arm-none-eabi-${NUTTX_GCC_VERSION}-${INSTALL_ARCH}-linux.tar.bz2 && \
+		wget -q -O /tmp/gcc-arm-none-eabi-${NUTTX_GCC_VERSION}-linux.tar.bz2 https://armkeil.blob.core.windows.net/developer/Files/downloads/gnu-rm/${NUTTX_GCC_VERSION_SHORT}/gcc-arm-none-eabi-${NUTTX_GCC_VERSION}-${INSTALL_ARCH}-linux.tar.bz2 && \
 			sudo tar -jxf /tmp/gcc-arm-none-eabi-${NUTTX_GCC_VERSION}-linux.tar.bz2 -C /opt/;

 		# add arm-none-eabi-gcc to user's PATH
@@ -185,37 +169,36 @@ if [[ $INSTALL_SIM == "true" ]]; then
 	echo "Installing PX4 simulation dependencies"

 	# General simulation dependencies
-	sudo DEBIAN_FRONTEND=noninteractive apt-get -y --quiet --no-install-recommends install \
+	sudo DEBIAN_FRONTEND=noninteractive apt-get -q -y --no-install-recommends install \
 		bc \
 		;

 	if [[ "${UBUNTU_RELEASE}" == "18.04" ]]; then
-		java_version=11
 		gazebo_version=9
+		MAVSDK_VERSION=0.39.0
+		wget -q "https://github.com/mavlink/MAVSDK/releases/download/v${MAVSDK_VERSION}/mavsdk_{MAVSDK_VERSION})_ubuntu18.04_amd64.deb" -O /tmp/mavsdk.deb && sudo dpkg -i /tmp/mavsdk.deb
 	elif [[ "${UBUNTU_RELEASE}" == "20.04" ]]; then
-		java_version=14
 		gazebo_version=11
+		MAVSDK_VERSION=0.39.0
+		wget -q "https://github.com/mavlink/MAVSDK/releases/download/v{MAVSDK_VERSION}/mavsdk_{MAVSDK_VERSION}_ubuntu20.04_amd64.deb" -O /tmp/mavsdk.deb && sudo dpkg -i /tmp/mavsdk.deb
 	else
-		java_version=14
 		gazebo_version=11
 	fi
+
 	# Java (jmavsim or fastrtps)
-	sudo DEBIAN_FRONTEND=noninteractive apt-get -y --quiet --no-install-recommends install \
+	sudo DEBIAN_FRONTEND=noninteractive apt-get -q -y --no-install-recommends install \
 		ant \
-		openjdk-$java_version-jre \
-		openjdk-$java_version-jdk \
+		default-jre-headless \
+		default-jdk-headless \
 		libvecmath-java \
 		;

-	# Set Java 11 as default
-	sudo update-alternatives --set java $(update-alternatives --list java | grep "java-$java_version")
-
 	# Gazebo
 	sudo sh -c 'echo "deb http://packages.osrfoundation.org/gazebo/ubuntu-stable `lsb_release -cs` main" > /etc/apt/sources.list.d/gazebo-stable.list'
-	wget http://packages.osrfoundation.org/gazebo.key -O - | sudo apt-key add -
+	wget -q http://packages.osrfoundation.org/gazebo.key -O - | sudo apt-key add -
 	# Update list, since new gazebo-stable.list has been added
-	sudo apt-get update -y --quiet
-	sudo DEBIAN_FRONTEND=noninteractive apt-get -y --quiet --no-install-recommends install \
+	sudo apt-get update -qq
+	sudo DEBIAN_FRONTEND=noninteractive apt-get -q -y --no-install-recommends install \
 		dmidecode \
 		gazebo$gazebo_version \
 		gstreamer1.0-plugins-bad \
@@ -94,7 +94,6 @@ px4_add_board(
 		hardfault_log
 		i2cdetect
 		led_control
-		manual_control
 		mft
 		mixer
 		motor_ramp
@@ -118,7 +117,7 @@ px4_add_board(
 		work_queue
 	EXAMPLES
 		fake_gps
-		#fake_imu
+		#fake_gyro
 		#fake_magnetometer
 		#fixedwing_control # Tutorial code from https://px4.io/dev/example_fixedwing_control
 		#hello
@@ -1,13 +0,0 @@
-include (${CMAKE_CURRENT_LIST_DIR}/uavcan_board_identity)
-
-px4_add_board(
-	PLATFORM nuttx
-	VENDOR ark
-	MODEL can-gps
-	LABEL canbootloader
-	TOOLCHAIN arm-none-eabi
-	ARCHITECTURE cortex-m4
-	CONSTRAINED_MEMORY
-	DRIVERS
-		bootloaders
-)
@@ -1,38 +0,0 @@
-include (${CMAKE_CURRENT_LIST_DIR}/uavcan_board_identity)
-
-px4_add_board(
-	PLATFORM nuttx
-	VENDOR ark
-	MODEL can-gps
-	LABEL debug
-	TOOLCHAIN arm-none-eabi
-	ARCHITECTURE cortex-m4
-	CONSTRAINED_MEMORY
-	ROMFSROOT cannode
-	UAVCAN_INTERFACES 1
-	DRIVERS
-		barometer/bmp388
-		bootloaders
-		gps
-		imu/invensense/icm42688p
-		magnetometer/bosch/bmm150
-		safety_button
-		tone_alarm
-		uavcannode
-	MODULES
-		#ekf2
-		#load_mon
-		#sensors
-	SYSTEMCMDS
-		i2cdetect
-		led_control
-		param
-		perf
-		reboot
-		top
-		topic_listener
-		tune_control
-		uorb
-		ver
-		work_queue
-)
@@ -1,38 +0,0 @@
-include (${CMAKE_CURRENT_LIST_DIR}/uavcan_board_identity)
-
-px4_add_board(
-	PLATFORM nuttx
-	VENDOR ark
-	MODEL can-gps
-	LABEL default
-	TOOLCHAIN arm-none-eabi
-	ARCHITECTURE cortex-m4
-	#CONSTRAINED_FLASH
-	CONSTRAINED_MEMORY
-	ROMFSROOT cannode
-	UAVCAN_INTERFACES 1
-	DRIVERS
-		barometer/bmp388
-		bootloaders
-		gps
-		imu/invensense/icm42688p
-		magnetometer/bosch/bmm150
-		safety_button
-		tone_alarm
-		uavcannode
-	MODULES
-		#ekf2
-		#load_mon
-		#sensors
-	SYSTEMCMDS
-		#mft
-		#mtd
-		param
-		#perf
-		#reboot
-		#system_time
-		#top
-		#topic_listener
-		#ver
-		#work_queue
-)
@@ -1,13 +0,0 @@
-{
-    "board_id": 81,
-    "magic": "PX4FWv1",
-    "description": "Firmware for the ARK gps board",
-    "image": "",
-    "build_time": 0,
-    "summary": "ARKGPS",
-    "version": "0.1",
-    "image_size": 0,
-    "image_maxsize": 2080768,
-    "git_identity": "",
-    "board_revision": 0
-}
@@ -1,9 +0,0 @@
-#!/bin/sh
-#
-# board specific defaults
-#------------------------------------------------------------------------------
-
-param set-default CBRK_IO_SAFETY 0
-
-safety_button start
-tone_alarm start
@@ -1,11 +0,0 @@
-#!/bin/sh
-#
-# board sensors init
-#------------------------------------------------------------------------------
-gps start -d /dev/ttyS0 -p ubx
-
-icm42688p -R 0 -s start
-
-bmp388 -I -b 2 start
-
-bmm150 -I -b 1 start
@@ -1,68 +0,0 @@
-#
-# This file is autogenerated: PLEASE DO NOT EDIT IT.
-#
-# You can use "make menuconfig" to make any modifications to the installed .config file.
-# You can then do "make savedefconfig" to generate a new defconfig file that includes your
-# modifications.
-#
-CONFIG_ARCH="arm"
-CONFIG_ARCH_BOARD_CUSTOM=y
-CONFIG_ARCH_BOARD_CUSTOM_DIR="../nuttx-config"
-CONFIG_ARCH_BOARD_CUSTOM_DIR_RELPATH=y
-CONFIG_ARCH_BOARD_CUSTOM_NAME="px4"
-CONFIG_ARCH_CHIP="stm32"
-CONFIG_ARCH_CHIP_STM32=y
-CONFIG_ARCH_CHIP_STM32F412CE=y
-CONFIG_ARCH_INTERRUPTSTACK=4096
-CONFIG_ARMV7M_MEMCPY=y
-CONFIG_ARMV7M_USEBASEPRI=y
-CONFIG_BINFMT_DISABLE=y
-CONFIG_BOARD_LOOPSPERMSEC=16717
-CONFIG_C99_BOOL8=y
-CONFIG_CLOCK_MONOTONIC=y
-CONFIG_DEBUG_FULLOPT=y
-CONFIG_DEBUG_SYMBOLS=y
-CONFIG_DEFAULT_SMALL=y
-CONFIG_DISABLE_MOUNTPOINT=y
-CONFIG_DISABLE_MQUEUE=y
-CONFIG_DISABLE_PTHREAD=y
-CONFIG_EXPERIMENTAL=y
-CONFIG_FDCLONE_DISABLE=y
-CONFIG_FDCLONE_STDIO=y
-CONFIG_HAVE_CXX=y
-CONFIG_HAVE_CXXINITIALIZE=y
-CONFIG_IDLETHREAD_STACKSIZE=4096
-CONFIG_LIBC_FLOATINGPOINT=y
-CONFIG_LIBC_LONG_LONG=y
-CONFIG_LIBC_STRERROR=y
-CONFIG_LIB_BOARDCTL=y
-CONFIG_MAX_TASKS=0
-CONFIG_MM_REGIONS=2
-CONFIG_NAME_MAX=0
-CONFIG_NUNGET_CHARS=0
-CONFIG_NXFONTS_DISABLE_16BPP=y
-CONFIG_NXFONTS_DISABLE_1BPP=y
-CONFIG_NXFONTS_DISABLE_24BPP=y
-CONFIG_NXFONTS_DISABLE_2BPP=y
-CONFIG_NXFONTS_DISABLE_32BPP=y
-CONFIG_NXFONTS_DISABLE_4BPP=y
-CONFIG_NXFONTS_DISABLE_8BPP=y
-CONFIG_PREALLOC_TIMERS=0
-CONFIG_PTHREAD_STACK_MIN=512
-CONFIG_RAM_SIZE=262144
-CONFIG_RAM_START=0x20010000
-CONFIG_RAW_BINARY=y
-CONFIG_SDCLONE_DISABLE=y
-CONFIG_SIG_DEFAULT=y
-CONFIG_SIG_SIGALRM_ACTION=y
-CONFIG_SIG_SIGUSR1_ACTION=y
-CONFIG_SIG_SIGUSR2_ACTION=y
-CONFIG_STACK_COLORATION=y
-CONFIG_START_DAY=30
-CONFIG_START_MONTH=11
-CONFIG_STDIO_DISABLE_BUFFERING=y
-CONFIG_STM32_NOEXT_VECTORS=y
-CONFIG_STM32_TIM8=y
-CONFIG_TASK_NAME_SIZE=0
-CONFIG_USEC_PER_TICK=1000
-CONFIG_USERMAIN_STACKSIZE=4096
@@ -1,152 +0,0 @@
-/************************************************************************************
- * configs/px4fmu/include/board.h
- * include/arch/board/board.h
- *
- *   Copyright (C) 2009 Gregory Nutt. All rights reserved.
- *   Author: Gregory Nutt <gnutt@nuttx.org>
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- * 3. Neither the name NuttX nor the names of its contributors may be
- *    used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ************************************************************************************/
-#include "board_dma_map.h"
-
-#ifndef __ARCH_BOARD_BOARD_H
-#define __ARCH_BOARD_BOARD_H
-
-#include <nuttx/config.h>
-#ifndef __ASSEMBLY__
-# include <stdint.h>
-#endif
-
-#include <stm32.h>
-
-/* HSI - 8 MHz RC factory-trimmed
- * LSI - 32 KHz RC
- * HSE - 8  MHz Crystal
- * LSE - not installed
- */
-#define STM32_BOARD_USEHSE      1
-#define STM32_BOARD_XTAL        8000000
-#define STM32_HSE_FREQUENCY     STM32_BOARD_XTAL
-
-#define STM32_HSI_FREQUENCY     16000000ul
-#define STM32_LSI_FREQUENCY     32000
-
-/* Main PLL Configuration */
-#define STM32_PLLCFG_PLLM       RCC_PLLCFG_PLLM(8)
-#define STM32_PLLCFG_PLLN       RCC_PLLCFG_PLLN(384)
-#define STM32_PLLCFG_PLLP       RCC_PLLCFG_PLLP_4
-#define STM32_PLLCFG_PLLQ       RCC_PLLCFG_PLLQ(8)
-#define STM32_PLLCFG_PLLR       RCC_PLLCFG_PLLR(2)
-
-#define STM32_RCC_PLLI2SCFGR_PLLI2SM RCC_PLLI2SCFGR_PLLI2SM(16)
-#define STM32_RCC_PLLI2SCFGR_PLLI2SN RCC_PLLI2SCFGR_PLLI2SN(192)
-#define STM32_RCC_PLLI2SCFGR_PLLI2SQ RCC_PLLI2SCFGR_PLLI2SQ(2)
-#define STM32_RCC_PLLI2SCFGR_PLLI2SR RCC_PLLI2SCFGR_PLLI2SR(2)
-#define STM32_RCC_PLLI2SCFGR_PLLI2SSRC RCC_PLLI2SCFGR_PLLI2SSRC(0) /* HSE or HSI depending on PLLSRC of PLLCFGR*/
-
-#define STM32_RCC_DCKCFGR2_CK48MSEL RCC_DCKCFGR2_CK48MSEL_PLL
-#define STM32_RCC_DCKCFGR2_FMPI2C1SEL RCC_DCKCFGR2_FMPI2C1SEL_APB
-#define STM32_RCC_DCKCFGR2_SDIOSEL RCC_DCKCFGR2_SDIOSEL_48MHZ
-
-#define STM32_SYSCLK_FREQUENCY  96000000ul
-
-/* AHB clock (HCLK) is SYSCLK (96MHz) */
-#define STM32_RCC_CFGR_HPRE     RCC_CFGR_HPRE_SYSCLK      /* HCLK  = SYSCLK / 1 */
-#define STM32_HCLK_FREQUENCY    STM32_SYSCLK_FREQUENCY
-#define STM32_BOARD_HCLK        STM32_HCLK_FREQUENCY      /* Same as above, to satisfy compiler */
-
-/* APB1 clock (PCLK1) is HCLK/2 (48MHz) */
-#define STM32_RCC_CFGR_PPRE1    RCC_CFGR_PPRE1_HCLKd2     /* PCLK1 = HCLK / 2 */
-#define STM32_PCLK1_FREQUENCY   (STM32_HCLK_FREQUENCY/2)
-
-/* Timers driven from APB1 will be twice PCLK1 (see page 112 of reference manual) */
-#define STM32_APB1_TIM2_CLKIN   (2*STM32_PCLK1_FREQUENCY)
-#define STM32_APB1_TIM3_CLKIN   (2*STM32_PCLK1_FREQUENCY)
-#define STM32_APB1_TIM4_CLKIN   (2*STM32_PCLK1_FREQUENCY)
-#define STM32_APB1_TIM5_CLKIN   (2*STM32_PCLK1_FREQUENCY)
-#define STM32_APB1_TIM12_CLKIN  (2*STM32_PCLK1_FREQUENCY)
-#define STM32_APB1_TIM13_CLKIN  (2*STM32_PCLK1_FREQUENCY)
-#define STM32_APB1_TIM14_CLKIN  (2*STM32_PCLK1_FREQUENCY)
-
-/* APB2 clock (PCLK2) is HCLK (96MHz) */
-#define STM32_RCC_CFGR_PPRE2    RCC_CFGR_PPRE2_HCLK       /* PCLK2 = HCLK */
-#define STM32_PCLK2_FREQUENCY   (STM32_HCLK_FREQUENCY)
-
-/* Timers driven from APB2 will be PCLK2 since no prescale division */
-#define STM32_APB2_TIM1_CLKIN   (STM32_PCLK2_FREQUENCY)
-#define STM32_APB2_TIM8_CLKIN   (STM32_PCLK2_FREQUENCY)
-#define STM32_APB2_TIM9_CLKIN   (STM32_PCLK2_FREQUENCY)
-#define STM32_APB2_TIM10_CLKIN  (STM32_PCLK2_FREQUENCY)
-#define STM32_APB2_TIM11_CLKIN  (STM32_PCLK2_FREQUENCY)
-
-/* Timer Frequencies, if APBx is set to 1, frequency is same to APBx otherwise frequency is 2xAPBx. */
-#define BOARD_TIM2_FREQUENCY    (2 * STM32_PCLK1_FREQUENCY)
-#define BOARD_TIM3_FREQUENCY    (2 * STM32_PCLK1_FREQUENCY)
-#define BOARD_TIM4_FREQUENCY    (2 * STM32_PCLK1_FREQUENCY)
-#define BOARD_TIM5_FREQUENCY    (2 * STM32_PCLK1_FREQUENCY)
-#define BOARD_TIM6_FREQUENCY    (2 * STM32_PCLK1_FREQUENCY)
-#define BOARD_TIM7_FREQUENCY    (2 * STM32_PCLK1_FREQUENCY)
-#define BOARD_TIM8_FREQUENCY    (2 * STM32_PCLK2_FREQUENCY)
-
-/* Alternate function pin selections ************************************************/
-
-/* UARTs */
-#define GPIO_USART1_RX	GPIO_USART1_RX_2
-#define GPIO_USART1_TX	GPIO_USART1_TX_3
-
-#define GPIO_USART2_RX	GPIO_USART2_RX_1
-#define GPIO_USART2_TX	GPIO_USART2_TX_1
-
-/* CAN */
-#define GPIO_CAN1_RX	GPIO_CAN1_RX_1
-#define GPIO_CAN1_TX	GPIO_CAN1_TX_1
-
-/* I2C */
-
-#define GPIO_MCU_I2C1_SCL
-#define GPIO_MCU_I2C1_SDA
-
-#define GPIO_I2C1_SCL	GPIO_I2C1_SCL_1
-#define GPIO_I2C1_SDA	GPIO_I2C1_SDA_1
-
-#define GPIO_I2C1_SCL_GPIO                  (GPIO_OUTPUT | GPIO_OPENDRAIN |GPIO_SPEED_50MHz | GPIO_OUTPUT_SET | GPIO_PORTB | GPIO_PIN6)
-#define GPIO_I2C1_SDA_GPIO                  (GPIO_OUTPUT | GPIO_OPENDRAIN |GPIO_SPEED_50MHz | GPIO_OUTPUT_SET | GPIO_PORTB | GPIO_PIN7)
-
-#define GPIO_I2C2_SCL	GPIO_I2C2_SCL_1
-#define GPIO_I2C2_SDA	GPIO_I2C2_SDA_4
-
-#define GPIO_I2C2_SCL_GPIO                  (GPIO_OUTPUT | GPIO_OPENDRAIN |GPIO_SPEED_50MHz | GPIO_OUTPUT_SET | GPIO_PORTB | GPIO_PIN9)
-#define GPIO_I2C2_SDA_GPIO                  (GPIO_OUTPUT | GPIO_OPENDRAIN |GPIO_SPEED_50MHz | GPIO_OUTPUT_SET | GPIO_PORTB | GPIO_PIN10)
-
-/* SPI */
-#define GPIO_SPI1_MISO  GPIO_SPI1_MISO_1
-#define GPIO_SPI1_MOSI  GPIO_SPI1_MOSI_1
-#define GPIO_SPI1_SCK   GPIO_SPI1_SCK_1
-
-#endif /* __ARCH_BOARD_BOARD_H */
@@ -1,43 +0,0 @@
-/****************************************************************************
- *
- *   Copyright (c) 2021 PX4 Development Team. All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- * 3. Neither the name PX4 nor the names of its contributors may be
- *    used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ****************************************************************************/
-
-#pragma once
-
-// DMA1 Channel/Stream Selections
-//--------------------------------------------//---------------------------//----------------
-
-
-//  DMA2 Channel/Stream Selections
-//--------------------------------------------//---------------------------//----------------
-#define DMACHAN_SPI1_RX    DMAMAP_SPI1_RX_2   // DMA2, Stream 2, Channel 3
-#define DMACHAN_SPI1_TX    DMAMAP_SPI1_TX_1   // DMA2, Stream 5, Channel 3
@@ -1,164 +0,0 @@
-#
-# This file is autogenerated: PLEASE DO NOT EDIT IT.
-#
-# You can use "make menuconfig" to make any modifications to the installed .config file.
-# You can then do "make savedefconfig" to generate a new defconfig file that includes your
-# modifications.
-#
-# CONFIG_DISABLE_OS_API is not set
-# CONFIG_DISABLE_PSEUDOFS_OPERATIONS is not set
-# CONFIG_NSH_DISABLEBG is not set
-# CONFIG_NSH_DISABLESCRIPT is not set
-# CONFIG_NSH_DISABLE_DF is not set
-# CONFIG_NSH_DISABLE_EXEC is not set
-# CONFIG_NSH_DISABLE_EXIT is not set
-# CONFIG_NSH_DISABLE_GET is not set
-# CONFIG_NSH_DISABLE_ITEF is not set
-# CONFIG_NSH_DISABLE_LOOPS is not set
-# CONFIG_NSH_DISABLE_SEMICOLON is not set
-# CONFIG_NSH_DISABLE_TIME is not set
-# CONFIG_STM32_DMACAPABLE is not set
-CONFIG_ARCH="arm"
-CONFIG_ARCH_BOARD_CUSTOM=y
-CONFIG_ARCH_BOARD_CUSTOM_DIR="../nuttx-config"
-CONFIG_ARCH_BOARD_CUSTOM_DIR_RELPATH=y
-CONFIG_ARCH_BOARD_CUSTOM_NAME="px4"
-CONFIG_ARCH_CHIP="stm32"
-CONFIG_ARCH_CHIP_STM32=y
-CONFIG_ARCH_CHIP_STM32F412CE=y
-CONFIG_ARCH_INTERRUPTSTACK=512
-CONFIG_ARCH_STACKDUMP=y
-CONFIG_ARMV7M_MEMCPY=y
-CONFIG_ARMV7M_USEBASEPRI=y
-CONFIG_BOARDCTL_RESET=y
-CONFIG_BOARD_LOOPSPERMSEC=16717
-CONFIG_BOARD_RESET_ON_ASSERT=2
-CONFIG_BUILTIN=y
-CONFIG_C99_BOOL8=y
-CONFIG_CLOCK_MONOTONIC=y
-CONFIG_DEBUG_FULLOPT=y
-CONFIG_DEBUG_HARDFAULT_ALERT=y
-CONFIG_DEBUG_SYMBOLS=y
-CONFIG_DEFAULT_SMALL=y
-CONFIG_DEV_FIFO_SIZE=0
-CONFIG_DEV_PIPE_MAXSIZE=1024
-CONFIG_DEV_PIPE_SIZE=70
-CONFIG_FDCLONE_STDIO=y
-CONFIG_FS_BINFS=y
-CONFIG_FS_CROMFS=y
-CONFIG_FS_FAT=y
-CONFIG_FS_FATTIME=y
-CONFIG_FS_PROCFS=y
-CONFIG_FS_PROCFS_INCLUDE_PROGMEM=y
-CONFIG_FS_PROCFS_REGISTER=y
-CONFIG_FS_ROMFS=y
-CONFIG_GRAN=y
-CONFIG_GRAN_INTR=y
-CONFIG_HAVE_CXX=y
-CONFIG_HAVE_CXXINITIALIZE=y
-CONFIG_I2C=y
-CONFIG_I2C_RESET=y
-CONFIG_IDLETHREAD_STACKSIZE=750
-CONFIG_LIBC_FLOATINGPOINT=y
-CONFIG_LIBC_LONG_LONG=y
-CONFIG_LIBC_STRERROR=y
-CONFIG_MEMSET_64BIT=y
-CONFIG_MEMSET_OPTSPEED=y
-CONFIG_MM_REGIONS=2
-CONFIG_MTD=y
-CONFIG_MTD_BYTE_WRITE=y
-CONFIG_MTD_PARTITION=y
-CONFIG_MTD_RAMTRON=y
-CONFIG_NAME_MAX=40
-CONFIG_NFILE_DESCRIPTORS=12
-CONFIG_NSH_ARCHINIT=y
-CONFIG_NSH_ARCHROMFS=y
-CONFIG_NSH_ARGCAT=y
-CONFIG_NSH_BUILTIN_APPS=y
-CONFIG_NSH_CMDPARMS=y
-CONFIG_NSH_CROMFSETC=y
-CONFIG_NSH_DISABLE_IFCONFIG=y
-CONFIG_NSH_DISABLE_IFUPDOWN=y
-CONFIG_NSH_DISABLE_MB=y
-CONFIG_NSH_DISABLE_MH=y
-CONFIG_NSH_DISABLE_MW=y
-CONFIG_NSH_DISABLE_TELNETD=y
-CONFIG_NSH_LINELEN=128
-CONFIG_NSH_MAXARGUMENTS=15
-CONFIG_NSH_NESTDEPTH=8
-CONFIG_NSH_QUOTE=y
-CONFIG_NSH_ROMFSETC=y
-CONFIG_NSH_ROMFSSECTSIZE=128
-CONFIG_NSH_STRERROR=y
-CONFIG_NSH_VARS=y
-CONFIG_PIPES=y
-CONFIG_PREALLOC_TIMERS=50
-CONFIG_PRIORITY_INHERITANCE=y
-CONFIG_PTHREAD_MUTEX_ROBUST=y
-CONFIG_PTHREAD_STACK_MIN=512
-CONFIG_RAMTRON_SETSPEED=y
-CONFIG_RAMTRON_WRITEWAIT=y
-CONFIG_RAM_SIZE=262144
-CONFIG_RAM_START=0x20000000
-CONFIG_RAW_BINARY=y
-CONFIG_RTC_DATETIME=y
-CONFIG_SCHED_ATEXIT=y
-CONFIG_SCHED_HPWORK=y
-CONFIG_SCHED_HPWORKPRIORITY=249
-CONFIG_SCHED_HPWORKSTACKSIZE=1280
-CONFIG_SCHED_INSTRUMENTATION=y
-CONFIG_SCHED_INSTRUMENTATION_EXTERNAL=y
-CONFIG_SCHED_LPWORK=y
-CONFIG_SCHED_LPWORKPRIORITY=50
-CONFIG_SCHED_LPWORKSTACKSIZE=1632
-CONFIG_SCHED_WAITPID=y
-CONFIG_SEM_NNESTPRIO=8
-CONFIG_SEM_PREALLOCHOLDERS=0
-CONFIG_SERIAL_TERMIOS=y
-CONFIG_SIG_DEFAULT=y
-CONFIG_SIG_SIGALRM_ACTION=y
-CONFIG_SIG_SIGUSR1_ACTION=y
-CONFIG_SIG_SIGUSR2_ACTION=y
-CONFIG_SIG_SIGWORK=4
-CONFIG_STACK_COLORATION=y
-CONFIG_START_DAY=30
-CONFIG_START_MONTH=11
-CONFIG_STDIO_BUFFER_SIZE=32
-CONFIG_STM32_ADC1=y
-CONFIG_STM32_DISABLE_IDLE_SLEEP_DURING_DEBUG=y
-CONFIG_STM32_DMA1=y
-CONFIG_STM32_DMA2=y
-CONFIG_STM32_FLASH_PREFETCH=y
-CONFIG_STM32_FLOWCONTROL_BROKEN=y
-CONFIG_STM32_I2C1=y
-CONFIG_STM32_I2C2=y
-CONFIG_STM32_JTAG_SW_ENABLE=y
-CONFIG_STM32_PWR=y
-CONFIG_STM32_RTC=y
-CONFIG_STM32_RTC_HSECLOCK=y
-CONFIG_STM32_RTC_MAGIC=0xfacefeee
-CONFIG_STM32_RTC_MAGIC_REG=1
-CONFIG_STM32_RTC_MAGIC_TIME_SET=0xfacefeef
-CONFIG_STM32_SERIALBRK_BSDCOMPAT=y
-CONFIG_STM32_SERIAL_DISABLE_REORDERING=y
-CONFIG_STM32_SPI1=y
-CONFIG_STM32_SPI1_DMA=y
-CONFIG_STM32_SPI1_DMA_BUFFER=1024
-CONFIG_STM32_SPI_DMA=y
-CONFIG_STM32_TIM8=y
-CONFIG_STM32_USART1=y
-CONFIG_STM32_USART2=y
-CONFIG_STM32_USART_BREAKS=y
-CONFIG_STM32_WWDG=y
-CONFIG_SYSTEM_NSH=y
-CONFIG_TASK_NAME_SIZE=24
-CONFIG_USART1_BAUD=57600
-CONFIG_USART1_RXBUFSIZE=600
-CONFIG_USART1_TXBUFSIZE=1100
-CONFIG_USART2_BAUD=57600
-CONFIG_USART2_RXBUFSIZE=600
-CONFIG_USART2_SERIAL_CONSOLE=y
-CONFIG_USART2_TXBUFSIZE=1100
-CONFIG_USEC_PER_TICK=1000
-CONFIG_USERMAIN_STACKSIZE=2624
-CONFIG_USER_ENTRYPOINT="nsh_main"
@@ -1,134 +0,0 @@
-/****************************************************************************
- * nuttx-config/scripts/canbootloader_script.ld
- *
- *   Copyright (C) 2015 Gregory Nutt. All rights reserved.
- *   Author: Gregory Nutt <gnutt@nuttx.org>
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- * 3. Neither the name NuttX nor the names of its contributors may be
- *    used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ****************************************************************************/
-
-/* The STM32F412 has 512Kb of FLASH beginning at address 0x0800:0000 and
- * 256Kb of SRAM. SRAM is split up into three blocks:
- *
- * 1) 112Kb of SRAM beginning at address 0x2000:0000
- * 2)  16Kb of SRAM beginning at address 0x2001:c000
- * 3)  64Kb of SRAM beginning at address 0x2002:0000
- * 4)  64Kb of TCM SRAM beginning at address 0x1000:0000
- *
- * When booting from FLASH, FLASH memory is aliased to address 0x0000:0000
- * where the code expects to begin execution by jumping to the entry point in
- * the 0x0800:0000 address range.
- *
- * The first 0x10000 of flash is reserved for the bootloader.
- */
-
-MEMORY
-{
-    flash (rx)   : ORIGIN = 0x08000000, LENGTH = 32K
-    sram (rwx)   : ORIGIN = 0x20000000, LENGTH = 192K
-}
-
-OUTPUT_ARCH(arm)
-
-ENTRY(__start)		/* treat __start as the anchor for dead code stripping */
-EXTERN(_vectors)	/* force the vectors to be included in the output */
-
-/*
- * Ensure that abort() is present in the final object.  The exception handling
- * code pulled in by libgcc.a requires it (and that code cannot be easily avoided).
- */
-EXTERN(abort)
-SECTIONS
-{
-	.text : {
-		_stext = ABSOLUTE(.);
-		*(.vectors)
-		*(.text .text.*)
-		*(.fixup)
-		*(.gnu.warning)
-		*(.rodata .rodata.*)
-		*(.gnu.linkonce.t.*)
-		*(.got)
-		*(.gcc_except_table)
-		*(.gnu.linkonce.r.*)
-		_etext = ABSOLUTE(.);
-	} > flash
-
-	/*
-	 * Init functions (static constructors and the like)
-	 */
-        .init_section : {
-                _sinit = ABSOLUTE(.);
-                KEEP(*(.init_array .init_array.*))
-                _einit = ABSOLUTE(.);
-        } > flash
-
-	.ARM.extab : {
-		*(.ARM.extab*)
-	} > flash
-
-	__exidx_start = ABSOLUTE(.);
-	.ARM.exidx : {
-		*(.ARM.exidx*)
-	} > flash
-	__exidx_end = ABSOLUTE(.);
-
-	_eronly = ABSOLUTE(.);
-
-	.data : {
-		_sdata = ABSOLUTE(.);
-		*(.data .data.*)
-		*(.gnu.linkonce.d.*)
-		CONSTRUCTORS
-		_edata = ABSOLUTE(.);
-	} > sram AT > flash
-
-	.bss : {
-		_sbss = ABSOLUTE(.);
-		*(.bss .bss.*)
-		*(.gnu.linkonce.b.*)
-		*(COMMON)
-		. = ALIGN(4);
-		_ebss = ABSOLUTE(.);
-	} > sram
-
-	/* Stabs debugging sections. */
-	.stab 0 : { *(.stab) }
-	.stabstr 0 : { *(.stabstr) }
-	.stab.excl 0 : { *(.stab.excl) }
-	.stab.exclstr 0 : { *(.stab.exclstr) }
-	.stab.index 0 : { *(.stab.index) }
-	.stab.indexstr 0 : { *(.stab.indexstr) }
-	.comment 0 : { *(.comment) }
-	.debug_abbrev 0 : { *(.debug_abbrev) }
-	.debug_info 0 : { *(.debug_info) }
-	.debug_line 0 : { *(.debug_line) }
-	.debug_pubnames 0 : { *(.debug_pubnames) }
-	.debug_aranges 0 : { *(.debug_aranges) }
-}
@@ -1,146 +0,0 @@
-/****************************************************************************
- * scripts/ld.script
- *
- *   Copyright (C) 2011 Gregory Nutt. All rights reserved.
- *   Author: Gregory Nutt <gnutt@nuttx.org>
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- * 3. Neither the name NuttX nor the names of its contributors may be
- *    used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ****************************************************************************/
-
-/* The STM32F412 has 512Kb of FLASH beginning at address 0x0800:0000 and
- * 256Kb of SRAM. SRAM is split up into three blocks:
- *
- * 1) 112Kb of SRAM beginning at address 0x2000:0000
- * 2)  16Kb of SRAM beginning at address 0x2001:c000
- * 3)  64Kb of SRAM beginning at address 0x2002:0000
- * 4)  64Kb of TCM SRAM beginning at address 0x1000:0000
- *
- * When booting from FLASH, FLASH memory is aliased to address 0x0000:0000
- * where the code expects to begin execution by jumping to the entry point in
- * the 0x0800:0000 address range.
- *
- * The first 0x10000 of flash is reserved for the bootloader.
- */
-
-MEMORY
-{
-    flash (rx)   : ORIGIN = 0x08010000, LENGTH = 448K
-    sram (rwx)   : ORIGIN = 0x20000000, LENGTH = 192K
-}
-
-OUTPUT_ARCH(arm)
-
-ENTRY(__start)		/* treat __start as the anchor for dead code stripping */
-EXTERN(_vectors)	/* force the vectors to be included in the output */
-
-/*
- * Ensure that abort() is present in the final object.  The exception handling
- * code pulled in by libgcc.a requires it (and that code cannot be easily avoided).
- */
-EXTERN(abort)
-EXTERN(_bootdelay_signature)
-
-SECTIONS
-{
-	.text : {
-		_stext = ABSOLUTE(.);
-		*(.vectors)
-		. = ALIGN(8);
-		/*
-		* This section positions the app_descriptor_t used
-		* by the make_can_boot_descriptor.py tool to set
-		* the application image's descriptor so that the
-		* uavcan bootloader has the ability to validate the
-		* image crc, size etc
-		*/
-		KEEP(*(.app_descriptor))
-		*(.text .text.*)
-		*(.fixup)
-		*(.gnu.warning)
-		*(.rodata .rodata.*)
-		*(.gnu.linkonce.t.*)
-		*(.got)
-		*(.gcc_except_table)
-		*(.gnu.linkonce.r.*)
-		_etext = ABSOLUTE(.);
-	} > flash
-
-	/*
-	 * Init functions (static constructors and the like)
-	 */
-        .init_section : {
-                _sinit = ABSOLUTE(.);
-                KEEP(*(.init_array .init_array.*))
-                _einit = ABSOLUTE(.);
-        } > flash
-
-
-	.ARM.extab : {
-		*(.ARM.extab*)
-	} > flash
-
-	__exidx_start = ABSOLUTE(.);
-	.ARM.exidx : {
-		*(.ARM.exidx*)
-	} > flash
-	__exidx_end = ABSOLUTE(.);
-
-	_eronly = ABSOLUTE(.);
-
-	.data : {
-		_sdata = ABSOLUTE(.);
-		*(.data .data.*)
-		*(.gnu.linkonce.d.*)
-		CONSTRUCTORS
-		_edata = ABSOLUTE(.);
-	} > sram AT > flash
-
-	.bss : {
-		_sbss = ABSOLUTE(.);
-		*(.bss .bss.*)
-		*(.gnu.linkonce.b.*)
-		*(COMMON)
-		. = ALIGN(4);
-		_ebss = ABSOLUTE(.);
-	} > sram
-
-	/* Stabs debugging sections. */
-	.stab 0 : { *(.stab) }
-	.stabstr 0 : { *(.stabstr) }
-	.stab.excl 0 : { *(.stab.excl) }
-	.stab.exclstr 0 : { *(.stab.exclstr) }
-	.stab.index 0 : { *(.stab.index) }
-	.stab.indexstr 0 : { *(.stab.indexstr) }
-	.comment 0 : { *(.comment) }
-	.debug_abbrev 0 : { *(.debug_abbrev) }
-	.debug_info 0 : { *(.debug_info) }
-	.debug_line 0 : { *(.debug_line) }
-	.debug_pubnames 0 : { *(.debug_pubnames) }
-	.debug_aranges 0 : { *(.debug_aranges) }
-}
@@ -1,68 +0,0 @@
-############################################################################
-#
-#   Copyright (c) 2020 PX4 Development Team. All rights reserved.
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions
-# are met:
-#
-# 1. Redistributions of source code must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-# 2. Redistributions in binary form must reproduce the above copyright
-#    notice, this list of conditions and the following disclaimer in
-#    the documentation and/or other materials provided with the
-#    distribution.
-# 3. Neither the name PX4 nor the names of its contributors may be
-#    used to endorse or promote products derived from this software
-#    without specific prior written permission.
-#
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
-# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
-# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
-# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
-# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
-# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
-# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
-# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-# POSSIBILITY OF SUCH DAMAGE.
-#
-############################################################################
-
-if("${PX4_BOARD_LABEL}" STREQUAL  "canbootloader")
-
-	add_library(drivers_board
-		boot_config.h
-		boot.c
-		led.c
-		led.h
-	)
-	target_link_libraries(drivers_board
-		PRIVATE
-			nuttx_arch
-			nuttx_drivers
-			canbootloader
-	)
-	target_include_directories(drivers_board PRIVATE ${PX4_SOURCE_DIR}/platforms/nuttx/src/canbootloader)
-
-else()
-	add_library(drivers_board
-		can.c
-		i2c.cpp
-		init.c
-		led.c
-		spi.cpp
-	)
-
-	target_link_libraries(drivers_board
-		PRIVATE
-			arch_spi
-			drivers__led # drv_led_start
-			nuttx_arch
-			nuttx_drivers
-			px4_layer
-			arch_io_pins
-	)
-endif()
@@ -1,115 +0,0 @@
-/****************************************************************************
- *
- *   Copyright (c) 2021 PX4 Development Team. All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- * 3. Neither the name PX4 nor the names of its contributors may be
- *    used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ****************************************************************************/
-
-/**
- * @file board_config.h
- *
- * board internal definitions
- */
-
-#pragma once
-
-#include <px4_platform_common/px4_config.h>
-#include <nuttx/compiler.h>
-#include <stdint.h>
-
-/* BUTTON */
-#define GPIO_BTN_SAFETY       /* PB15 */ (GPIO_INPUT|GPIO_PULLDOWN|GPIO_PORTB|GPIO_PIN15)
-
-/* Safety LED */
-#define GPIO_LED_SAFETY       /* PA1  */ (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_SET|GPIO_PORTA|GPIO_PIN1)
-
-/* Tone alarm output. */
-#define TONE_ALARM_TIMER             2    /* timer 2 */
-#define TONE_ALARM_CHANNEL           1    /* channel 1 */
-#define GPIO_TONE_ALARM_IDLE  /* PA0  */ (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTA|GPIO_PIN0)
-#define GPIO_TONE_ALARM       /* PA0  */ (GPIO_ALT|GPIO_AF1|GPIO_SPEED_2MHz|GPIO_PUSHPULL|GPIO_PORTA|GPIO_PIN0)
-
-/* CAN  Silent mode control */
-#define GPIO_CAN1_SILENT_S0   /* PB12 */ (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTB|GPIO_PIN12)
-
-/* CAN termination software control */
-#define GPIO_CAN1_TERMINATION /* PB13 */ (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTB|GPIO_PIN13)
-
-/* ICM42688p FSYNC */
-#define GPIO_42688P_FSYNC     /* PB8  */ (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTB|GPIO_PIN8)
-
-/* Boot config */
-#define GPIO_BOOT_CONFIG      /* PC15 */ (GPIO_INPUT|GPIO_PULLUP|GPIO_PORTC|GPIO_PIN15|GPIO_EXTI)
-
-/* LEDs are driven with open drain to support Anode to 5V or 3.3V */
-#define GPIO_TIM1_CH1         /* PA8  */ (GPIO_TIM1_CH1_1|GPIO_OPENDRAIN|GPIO_SPEED_2MHz)
-#define GPIO_TIM1_CH2         /* PA9  */ (GPIO_TIM1_CH2_1|GPIO_OPENDRAIN|GPIO_SPEED_2MHz)
-#define GPIO_TIM1_CH3         /* PA10 */ (GPIO_TIM1_CH3_1|GPIO_OPENDRAIN|GPIO_SPEED_2MHz)
-
-#define GPIO_I2C1_SCL_RESET   /* PB6  */  (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTB|GPIO_PIN6)
-#define GPIO_I2C1_SDA_RESET   /* PB7  */  (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTB|GPIO_PIN7)
-
-#define GPIO_I2C2_SCL_RESET   /* PB10 */  (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTB|GPIO_PIN10)
-#define GPIO_I2C2_SDA_RESET   /* PB9  */  (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTB|GPIO_PIN9)
-
-#define FLASH_BASED_PARAMS
-
-/* High-resolution timer */
-#define HRT_TIMER                    3  /* use timer 3 for the HRT */
-#define HRT_TIMER_CHANNEL            4  /* use capture/compare channel 4 */
-
-#define PX4_GPIO_INIT_LIST { \
-		GPIO_BTN_SAFETY,                  \
-		GPIO_LED_SAFETY,                  \
-		GPIO_I2C1_SCL_RESET,              \
-		GPIO_I2C1_SDA_RESET,              \
-		GPIO_I2C2_SCL_RESET,              \
-		GPIO_I2C2_SDA_RESET,              \
-		GPIO_42688P_FSYNC,                \
-		GPIO_BOOT_CONFIG,                 \
-		GPIO_CAN1_TX,                     \
-		GPIO_CAN1_RX,                     \
-		GPIO_CAN1_SILENT_S0,              \
-		GPIO_CAN1_TERMINATION,            \
-	}
-
-__BEGIN_DECLS
-
-#define BOARD_HAS_N_S_RGB_LED       1
-#define BOARD_MAX_LEDS              BOARD_HAS_N_S_RGB_LED
-
-#ifndef __ASSEMBLY__
-
-extern void stm32_spiinitialize(void);
-
-#include <px4_platform_common/board_common.h>
-
-#endif /* __ASSEMBLY__ */
-
-__END_DECLS
@@ -1,188 +0,0 @@
-/****************************************************************************
- *
- *   Copyright (c) 2021 PX4 Development Team. All rights reserved.
- *       Author: Ben Dyer <ben_dyer@mac.com>
- *               Pavel Kirienko <pavel.kirienko@zubax.com>
- *               David Sidrane <david_s5@nscdg.com>
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- * 3. Neither the name PX4 nor the names of its contributors may be
- *    used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ****************************************************************************/
-
-/****************************************************************************
- * Included Files
- ****************************************************************************/
-
-#include <px4_config.h>
-#include <stdint.h>
-#include "boot_config.h"
-#include "board.h"
-
-#include <debug.h>
-#include <string.h>
-#include <arch/board/board.h>
-
-#include <nuttx/board.h>
-#include "led.h"
-
-/************************************************************************************
- * Name: stm32_boardinitialize
- *
- * Description:
- *   All STM32 architectures must provide the following entry point.  This entry point
- *   is called early in the initialization -- after all memory has been configured
- *   and mapped but before any devices have been initialized.
- *
- ************************************************************************************/
-
-__EXPORT void stm32_boardinitialize(void)
-{
-	putreg32(getreg32(STM32_RCC_APB1ENR) | RCC_APB1ENR_CAN1EN, STM32_RCC_APB1ENR);
-	stm32_configgpio(GPIO_CAN1_RX);
-	stm32_configgpio(GPIO_CAN1_TX);
-	stm32_configgpio(GPIO_CAN1_SILENT_S0);
-	stm32_configgpio(GPIO_CAN1_TERMINATION);
-	putreg32(getreg32(STM32_RCC_APB1RSTR) | RCC_APB1RSTR_CAN1RST, STM32_RCC_APB1RSTR);
-	putreg32(getreg32(STM32_RCC_APB1RSTR) & ~RCC_APB1RSTR_CAN1RST, STM32_RCC_APB1RSTR);
-
-#if defined(OPT_WAIT_FOR_GETNODEINFO_JUMPER_GPIO)
-	stm32_configgpio(GPIO_GETNODEINFO_JUMPER);
-#endif
-
-}
-
-/************************************************************************************
- * Name: board_deinitialize
- *
- * Description:
- *   This function is called by the bootloader code prior to booting
- *   the application. Is should place the HW into an benign initialized state.
- *
- ************************************************************************************/
-
-void board_deinitialize(void)
-{
-	putreg32(getreg32(STM32_RCC_APB1RSTR) | RCC_APB1RSTR_CAN1RST, STM32_RCC_APB1RSTR);
-}
-
-/****************************************************************************
- * Name: board_get_product_name
- *
- * Description:
- *   Called to retrieve the product name. The returned value is a assumed
- *   to be written to a pascal style string that will be length prefixed
- *   and not null terminated
- *
- * Input Parameters:
- *    product_name - A pointer to a buffer to write the name.
- *    maxlen       - The maximum number of charter that can be written
- *
- * Returned Value:
- *   The length of characters written to the buffer.
- *
- ****************************************************************************/
-
-uint8_t board_get_product_name(uint8_t *product_name, size_t maxlen)
-{
-	DEBUGASSERT(maxlen > UAVCAN_STRLEN(HW_UAVCAN_NAME));
-	memcpy(product_name, HW_UAVCAN_NAME, UAVCAN_STRLEN(HW_UAVCAN_NAME));
-	return UAVCAN_STRLEN(HW_UAVCAN_NAME);
-}
-
-/****************************************************************************
- * Name: board_get_hardware_version
- *
- * Description:
- *   Called to retrieve the hardware version information. The function
- *   will first initialize the the callers struct to all zeros.
- *
- * Input Parameters:
- *    hw_version - A pointer to a uavcan_hardwareversion_t.
- *
- * Returned Value:
- *   Length of the unique_id
- *
- ****************************************************************************/
-
-size_t board_get_hardware_version(uavcan_HardwareVersion_t *hw_version)
-{
-	memset(hw_version, 0, sizeof(uavcan_HardwareVersion_t));
-
-	hw_version->major = HW_VERSION_MAJOR;
-	hw_version->minor = HW_VERSION_MINOR;
-
-	return board_get_mfguid(*(mfguid_t *) hw_version->unique_id);
-}
-
-/****************************************************************************
- * Name: board_indicate
- *
- * Description:
- *   Provides User feedback to indicate the state of the bootloader
- *   on board specific  hardware.
- *
- * Input Parameters:
- *    indication - A member of the uiindication_t
- *
- * Returned Value:
- *   None
- *
- ****************************************************************************/
-#define led(n, code, r , g , b, h) {.red = (r),.green = (g), .blue = (b),.hz = (h)}
-
-typedef begin_packed_struct struct led_t {
-	uint8_t red;
-	uint8_t green;
-	uint8_t blue;
-	uint8_t hz;
-} end_packed_struct led_t;
-
-static const  led_t i2l[] = {
-
-	led(0, off,                             0,     0,     0,     0),
-	led(1, reset,                          128,   128,   128,   30),
-	led(2, autobaud_start,                  0,   128,     0,     1),
-	led(3, autobaud_end,                    0,   128,     0,     2),
-	led(4, allocation_start,                0,     0,    64,     2),
-	led(5, allocation_end,                  0,   128,    64,     3),
-	led(6, fw_update_start,                32,   128,    64,     3),
-	led(7, fw_update_erase_fail,           32,   128,    32,     3),
-	led(8, fw_update_invalid_response,     64,     0,     0,     1),
-	led(9, fw_update_timeout,              64,     0,     0,     2),
-	led(a, fw_update_invalid_crc,          64,     0,     0,     4),
-	led(b, jump_to_app,                     0,   128,     0,    10),
-
-};
-
-void board_indicate(uiindication_t indication)
-{
-	rgb_led(i2l[indication].red,
-		i2l[indication].green,
-		i2l[indication].blue,
-		i2l[indication].hz);
-}
@@ -1,130 +0,0 @@
-/****************************************************************************
- *
- *   Copyright (c) 2021 PX4 Development Team. All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- * 3. Neither the name PX4 nor the names of its contributors may be
- *    used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ****************************************************************************/
-
-/*
- * @file boot_config.h
- *
- * bootloader definitions that configures the behavior and options
- * of the Boot loader
- * This file is relies on the parent folder's boot_config.h file and defines
- * different usages of the hardware for bootloading
- */
-
-#pragma once
-
-/************************************************************************************
- * Included Files
- ************************************************************************************/
-
-/* Bring in the board_config.h definitions
- * todo:make this be pulled in from a targed's build
- * files in nuttx*/
-
-#include "board_config.h"
-#include "uavcan.h"
-#include <nuttx/compiler.h>
-
-#include <stdint.h>
-
-#include <stm32_flash.h>
-
-/****************************************************************************
- * Pre-processor Definitions
- ****************************************************************************/
-
-#define OPT_PREFERRED_NODE_ID ANY_NODE_ID
-
-//todo:wrap OPT_x in in ifdefs for command line definitions
-#define OPT_TBOOT_MS                    5000
-#define OPT_NODE_STATUS_RATE_MS         800
-#define OPT_NODE_INFO_RATE_MS           50
-#define OPT_BL_NUMBER_TIMERS            7
-
-/*
- *  This Option set is set to 1 ensure a provider of firmware has an
- *  opportunity update the node's firmware.
- *  This Option is the default policy and can be overridden by
- *  a jumper
- *  When this Policy is set, the node will ignore tboot and
- *  wait indefinitely for a GetNodeInfo request before booting.
- *
- *  OPT_WAIT_FOR_GETNODEINFO_JUMPER_GPIO_INVERT is used to allow
- *  the polarity of the jumper to be True Active
- *
- *  wait  OPT_WAIT_FOR_GETNODEINFO  OPT_WAIT_FOR_GETNODEINFO_JUMPER_GPIO
- *                                                 Jumper
- *   yes           1                       0         x
- *   yes           1                       1       Active
- *   no            1                       1       Not Active
- *   no            0                       0         X
- *   yes           0                       1       Active
- *   no            0                       1       Not Active
- *
- */
-#define OPT_WAIT_FOR_GETNODEINFO                    0
-#define OPT_WAIT_FOR_GETNODEINFO_JUMPER_GPIO        1
-#define OPT_WAIT_FOR_GETNODEINFO_JUMPER_GPIO_INVERT 0
-
-#define OPT_ENABLE_WD           1
-
-#define OPT_RESTART_TIMEOUT_MS          20000
-
-/* Reserved for the Booloader */
-#define OPT_BOOTLOADER_SIZE_IN_K        (1024*64)
-
-/* Reserved for the application out of the total
- * system flash minus the BOOTLOADER_SIZE_IN_K
- */
-#define OPT_APPLICATION_RESERVER_IN_K    0
-
-#define OPT_APPLICATION_IMAGE_OFFSET    OPT_BOOTLOADER_SIZE_IN_K
-#define OPT_APPLICATION_IMAGE_LENGTH    (FLASH_SIZE-(OPT_BOOTLOADER_SIZE_IN_K+OPT_APPLICATION_RESERVER_IN_K))
-
-
-#define FLASH_BASE              STM32_FLASH_BASE
-#define FLASH_SIZE              STM32_FLASH_SIZE
-
-#define APPLICATION_LOAD_ADDRESS (FLASH_BASE + OPT_APPLICATION_IMAGE_OFFSET)
-#define APPLICATION_SIZE (FLASH_SIZE-OPT_APPLICATION_IMAGE_OFFSET)
-#define APPLICATION_LAST_8BIT_ADDRRESS  ((uint8_t *)((APPLICATION_LOAD_ADDRESS+APPLICATION_SIZE)-sizeof(uint8_t)))
-#define APPLICATION_LAST_32BIT_ADDRRESS ((uint32_t *)((APPLICATION_LOAD_ADDRESS+APPLICATION_SIZE)-sizeof(uint32_t)))
-#define APPLICATION_LAST_64BIT_ADDRRESS ((uint64_t *)((APPLICATION_LOAD_ADDRESS+APPLICATION_SIZE)-sizeof(uint64_t)))
-
-/* If this board uses big flash that have large sectors */
-
-#define OPT_USE_YIELD
-
-/* Bootloader Option*****************************************************************
- *
- */
-#define GPIO_GETNODEINFO_JUMPER (GPIO_BOOT_CONFIG & ~GPIO_EXTI)
@@ -1,130 +0,0 @@
-/****************************************************************************
- *
- *   Copyright (C) 2021 PX4 Development Team. All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- * 3. Neither the name PX4 nor the names of its contributors may be
- *    used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ****************************************************************************/
-
-/**
- * @file can.c
- *
- * Board-specific CAN functions.
- */
-
-/************************************************************************************
- * Included Files
- ************************************************************************************/
-
-#include <px4_platform_common/px4_config.h>
-
-#include <errno.h>
-#include <debug.h>
-
-#include <nuttx/can/can.h>
-#include <arch/board/board.h>
-
-#include "chip.h"
-#include "arm_arch.h"
-
-#include "stm32.h"
-#include "stm32_can.h"
-#include "board_config.h"
-
-#ifdef CONFIG_CAN
-
-/************************************************************************************
- * Pre-processor Definitions
- ************************************************************************************/
-/* Configuration ********************************************************************/
-
-#if defined(CONFIG_STM32_CAN1) && defined(CONFIG_STM32_CAN2)
-#  warning "Both CAN1 and CAN2 are enabled.  Assuming only CAN1."
-#  undef CONFIG_STM32_CAN2
-#endif
-
-#ifdef CONFIG_STM32_CAN1
-#  define CAN_PORT 1
-#else
-#  define CAN_PORT 2
-#endif
-
-/************************************************************************************
- * Private Functions
- ************************************************************************************/
-
-/************************************************************************************
- * Public Functions
- ************************************************************************************/
-int can_devinit(void);
-
-/************************************************************************************
- * Name: can_devinit
- *
- * Description:
- *   All STM32 architectures must provide the following interface to work with
- *   examples/can.
- *
- ************************************************************************************/
-
-int can_devinit(void)
-{
-	static bool initialized = false;
-	struct can_dev_s *can;
-	int ret;
-
-	/* Check if we have already initialized */
-
-	if (!initialized) {
-		/* Call stm32_caninitialize() to get an instance of the CAN interface */
-
-		can = stm32_caninitialize(CAN_PORT);
-
-		if (can == NULL) {
-			canerr("ERROR:  Failed to get CAN interface\n");
-			return -ENODEV;
-		}
-
-		/* Register the CAN driver at "/dev/can0" */
-
-		ret = can_register("/dev/can0", can);
-
-		if (ret < 0) {
-			canerr("ERROR: can_register failed: %d\n", ret);
-			return ret;
-		}
-
-		/* Now we are initialized */
-
-		initialized = true;
-	}
-
-	return OK;
-}
-
-#endif
@@ -1,39 +0,0 @@
-/****************************************************************************
- *
- *   Copyright (C) 2021 PX4 Development Team. All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- * 3. Neither the name PX4 nor the names of its contributors may be
- *    used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ****************************************************************************/
-
-#include <px4_arch/i2c_hw_description.h>
-
-constexpr px4_i2c_bus_t px4_i2c_buses[I2C_BUS_MAX_BUS_ITEMS] = {
-	initI2CBusInternal(1),
-	initI2CBusInternal(2),
-};
@@ -1,144 +0,0 @@
-/****************************************************************************
- *
- *   Copyright (c) 2021 PX4 Development Team. All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- * 3. Neither the name PX4 nor the names of its contributors may be
- *    used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ****************************************************************************/
-
-/**
- * @file init.c
- *
- * board specific early startup code.  This file implements the
- * board_app_initialize() function that is called early by nsh during startup.
- *
- * Code here is run before the rcS script is invoked; it should start required
- * subsystems and perform board-specific initialization.
- */
-
-#include <px4_platform_common/px4_config.h>
-#include <px4_platform_common/tasks.h>
-
-#include <stdbool.h>
-#include <stdio.h>
-#include <string.h>
-#include <debug.h>
-#include <errno.h>
-
-#include <nuttx/board.h>
-
-#include <stm32.h>
-#include "board_config.h"
-#include <stm32_uart.h>
-
-#include <arch/board/board.h>
-
-#include <drivers/drv_hrt.h>
-#include <drivers/drv_board_led.h>
-
-#include <systemlib/px4_macros.h>
-
-#include <px4_platform_common/init.h>
-#include <px4_platform/gpio.h>
-
-# if defined(FLASH_BASED_PARAMS)
-#  include <parameters/flashparams/flashfs.h>
-#endif
-
-/************************************************************************************
- * Name: stm32_boardinitialize
- *
- * Description:
- *   All STM32 architectures must provide the following entry point.  This entry point
- *   is called early in the initialization -- after all memory has been configured
- *   and mapped but before any devices have been initialized.
- *
- ************************************************************************************/
-
-__EXPORT void stm32_boardinitialize(void)
-{
-	/* configure pins */
-	const uint32_t gpio[] = PX4_GPIO_INIT_LIST;
-	px4_gpio_init(gpio, arraySize(gpio));
-
-	// Configure SPI all interfaces GPIO & enable power.
-	stm32_spiinitialize();
-}
-
-/****************************************************************************
- * Name: board_app_initialize
- *
- * Description:
- *   Perform application specific initialization.  This function is never
- *   called directly from application code, but only indirectly via the
- *   (non-standard) boardctl() interface using the command BOARDIOC_INIT.
- *
- * Input Parameters:
- *   arg - The boardctl() argument is passed to the board_app_initialize()
- *         implementation without modification.  The argument has no
- *         meaning to NuttX; the meaning of the argument is a contract
- *         between the board-specific initalization logic and the the
- *         matching application logic.  The value cold be such things as a
- *         mode enumeration value, a set of DIP switch switch settings, a
- *         pointer to configuration data read from a file or serial FLASH,
- *         or whatever you would like to do with it.  Every implementation
- *         should accept zero/NULL as a default configuration.
- *
- * Returned Value:
- *   Zero (OK) is returned on success; a negated errno value is returned on
- *   any failure to indicate the nature of the failure.
- *
- ****************************************************************************/
-
-__EXPORT int board_app_initialize(uintptr_t arg)
-{
-	px4_platform_init();
-
-#if defined(FLASH_BASED_PARAMS)
-	static sector_descriptor_t params_sector_map[] = {
-		{2, 16 * 1024, 0x08008000},
-		{3, 16 * 1024, 0x0800C000},
-		{0, 0, 0},
-	};
-
-	/* Initialize the flashfs layer to use heap allocated memory */
-	int result = parameter_flashfs_init(params_sector_map, NULL, 0);
-
-	if (result != OK) {
-		syslog(LOG_ERR, "[boot] FAILED to init params in FLASH %d\n", result);
-		return -ENODEV;
-	}
-
-#endif // FLASH_BASED_PARAMS
-
-	/* Configure the HW based on the manifest */
-
-	px4_platform_configure();
-
-	return OK;
-}
@@ -1,124 +0,0 @@
-/****************************************************************************
- *
- *   Copyright (c) 2021 PX4 Development Team. All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- * 3. Neither the name PX4 nor the names of its contributors may be
- *    used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ****************************************************************************/
-
-/**
- * @file led.c
- *
- * LED backend.
- */
-
-#include <px4_platform_common/px4_config.h>
-
-#include <stdbool.h>
-
-#include "chip.h"
-#include "stm32_gpio.h"
-#include "board_config.h"
-
-#include <nuttx/board.h>
-#include <arch/board/board.h>
-
-#include "led.h"
-
-#define TMR_BASE        STM32_TIM1_BASE
-#define TMR_FREQUENCY   STM32_APB2_TIM1_CLKIN
-#define TMR_REG(o)      (TMR_BASE+(o))
-
-void rgb_led(int r, int g, int b, int freqs)
-{
-
-	long fosc = TMR_FREQUENCY;
-	long prescale = 2048;
-	long p1s = fosc / prescale;
-	long p0p5s  = p1s / 2;
-	uint16_t val;
-	static bool once = 0;
-
-	if (!once) {
-		once = 1;
-
-		/* Enabel Clock to Block */
-		modifyreg32(STM32_RCC_APB2ENR, 0, RCC_APB2ENR_TIM1EN);
-
-		/* Reload */
-
-		val = getreg16(TMR_REG(STM32_BTIM_EGR_OFFSET));
-		val |= ATIM_EGR_UG;
-		putreg16(val, TMR_REG(STM32_BTIM_EGR_OFFSET));
-
-		/* Set Prescaler STM32_TIM_SETCLOCK */
-
-		putreg16(prescale, TMR_REG(STM32_BTIM_PSC_OFFSET));
-
-		/* Enable STM32_TIM_SETMODE*/
-
-		putreg16(ATIM_CR1_CEN | ATIM_CR1_ARPE, TMR_REG(STM32_BTIM_CR1_OFFSET));
-
-
-		putreg16((ATIM_CCMR_MODE_PWM1 << ATIM_CCMR1_OC1M_SHIFT) | ATIM_CCMR1_OC1PE |
-			 (ATIM_CCMR_MODE_PWM1 << ATIM_CCMR1_OC2M_SHIFT) | ATIM_CCMR1_OC2PE, TMR_REG(STM32_GTIM_CCMR1_OFFSET));
-		putreg16((ATIM_CCMR_MODE_PWM1 << ATIM_CCMR2_OC3M_SHIFT) | ATIM_CCMR2_OC3PE, TMR_REG(STM32_GTIM_CCMR2_OFFSET));
-		putreg16(ATIM_CCER_CC3E | ATIM_CCER_CC3P |
-			 ATIM_CCER_CC2E | ATIM_CCER_CC2P |
-			 ATIM_CCER_CC1E | ATIM_CCER_CC1P, TMR_REG(STM32_GTIM_CCER_OFFSET));
-
-
-		stm32_configgpio(GPIO_TIM1_CH1);
-		stm32_configgpio(GPIO_TIM1_CH2);
-		stm32_configgpio(GPIO_TIM1_CH3);
-
-		/* master output enable = on */
-		putreg16(ATIM_BDTR_MOE, (TMR_REG(STM32_ATIM_BDTR_OFFSET)));
-	}
-
-	long p  = freqs == 0 ? p1s : p1s / freqs;
-	putreg32(p, TMR_REG(STM32_BTIM_ARR_OFFSET));
-
-	p  = freqs == 0 ? p1s + 1 : p0p5s / freqs;
-
-	putreg32((r * p) / 255, TMR_REG(STM32_GTIM_CCR1_OFFSET));
-	putreg32((g * p) / 255, TMR_REG(STM32_GTIM_CCR2_OFFSET));
-	putreg32((b * p) / 255, TMR_REG(STM32_GTIM_CCR3_OFFSET));
-
-	val = getreg16(TMR_REG(STM32_BTIM_CR1_OFFSET));
-
-	if (freqs == 0) {
-		val &= ~ATIM_CR1_CEN;
-
-	} else {
-		val |= ATIM_CR1_CEN;
-	}
-
-	putreg16(val, TMR_REG(STM32_BTIM_CR1_OFFSET));
-
-}
@@ -1,37 +0,0 @@
-/****************************************************************************
- *
- *   Copyright (C) 2015 PX4 Development Team. All rights reserved.
- *   Author: David Sidrane<david_s5@nscdg.com>
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- * 3. Neither the name PX4 nor the names of its contributors may be
- *    used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ****************************************************************************/
-
-__BEGIN_DECLS
-void rgb_led(int r, int g, int b, int freqs);
-__END_DECLS
@@ -1,44 +0,0 @@
-/****************************************************************************
- *
- *   Copyright (C) 2021 PX4 Development Team. All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- * 3. Neither the name PX4 nor the names of its contributors may be
- *    used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ****************************************************************************/
-
-#include <px4_arch/spi_hw_description.h>
-#include <drivers/drv_sensor.h>
-#include <nuttx/spi/spi.h>
-
-constexpr px4_spi_bus_t px4_spi_buses[SPI_BUS_MAX_BUS_ITEMS] = {
-	initSPIBus(SPI::Bus::SPI1, {
-		initSPIDevice(DRV_IMU_DEVTYPE_ICM42688P, SPI::CS{GPIO::PortB, GPIO::Pin0}, SPI::DRDY{GPIO::PortB, GPIO::Pin1}),
-	}),
-};
-
-static constexpr bool unused = validateSPIConfig(px4_spi_buses);
@@ -1,17 +0,0 @@
-# UAVCAN boot loadable Module ID
-set(uavcanblid_sw_version_major 0)
-set(uavcanblid_sw_version_minor 1)
-add_definitions(
-	-DAPP_VERSION_MAJOR=${uavcanblid_sw_version_major}
-	-DAPP_VERSION_MINOR=${uavcanblid_sw_version_minor}
-)
-
-set(uavcanblid_hw_version_major 0)
-set(uavcanblid_hw_version_minor 81)
-set(uavcanblid_name "\"org.ark.can-gps\"")
-
-add_definitions(
-	-DHW_UAVCAN_NAME=${uavcanblid_name}
-	-DHW_VERSION_MAJOR=${uavcanblid_hw_version_major}
-	-DHW_VERSION_MINOR=${uavcanblid_hw_version_minor}
-)
@@ -96,7 +96,6 @@ px4_add_board(
 		esc_calib
 		#hardfault_log
 		led_control
-		manual_control
 		mixer
 		motor_ramp
 		motor_test
@@ -76,7 +76,6 @@ px4_add_board(
 		vtol_att_control
 	SYSTEMCMDS
 		led_control
-		manual_control
 		mixer
 		#motor_ramp
 		motor_test
@@ -94,7 +94,6 @@ px4_add_board(
 		esc_calib
 		#hardfault_log
 		led_control
-		manual_control
 		mixer
 		motor_ramp
 		motor_test
@@ -76,7 +76,6 @@ px4_add_board(
 		vtol_att_control
 	SYSTEMCMDS
 		led_control
-		manual_control
 		mixer
 		#motor_ramp
 		motor_test
@@ -93,7 +93,6 @@ px4_add_board(
 		hardfault_log
 		i2cdetect
 		led_control
-		manual_control
 		mixer
 		motor_ramp
 		motor_test
@@ -115,7 +114,7 @@ px4_add_board(
 		work_queue
 	EXAMPLES
 		fake_gps
-		#fake_imu
+		#fake_gyro
 		#fake_magnetometer
 		#fixedwing_control # Tutorial code from https://px4.io/dev/example_fixedwing_control
 		#hello
@@ -143,7 +143,6 @@ CONFIG_NSH_STRERROR=y
 CONFIG_NSH_TELNET=y
 CONFIG_NSH_TELNET_LOGIN=y
 CONFIG_NSH_VARS=y
-CONFIG_OTG_ID_GPIO_DISABLE=y
 CONFIG_PIPES=y
 CONFIG_PREALLOC_TIMERS=50
 CONFIG_PRIORITY_INHERITANCE=y
@@ -90,7 +90,7 @@ static int configure_switch(void);
 __EXPORT void board_on_reset(int status)
 {
 	for (int i = 0; i < DIRECT_PWM_OUTPUT_CHANNELS; ++i) {
-		px4_arch_configgpio(PX4_MAKE_GPIO_INPUT(io_timer_channel_get_as_pwm_input(i)));
+		px4_arch_configgpio(PX4_MAKE_GPIO_INPUT_PULL_DOWN(io_timer_channel_get_as_pwm_input(i)));
 	}

 	if (status >= 0) {
@@ -75,7 +75,6 @@ px4_add_board(
 		dyn
 		esc_calib
 		led_control
-		manual_control
 		mixer
 		motor_ramp
 		motor_test
@@ -96,7 +95,7 @@ px4_add_board(
 	EXAMPLES
 		dyn_hello # dynamically loading modules example
 		fake_gps
-		fake_imu
+		fake_gyro
 		fake_magnetometer
 		fixedwing_control # Tutorial code from https://px4.io/dev/example_fixedwing_control
 		hello
@@ -49,7 +49,6 @@ px4_add_board(
 		hardfault_log
 		i2cdetect
 		led_control
-		manual_control
 		mft
 		mixer
 		motor_ramp
@@ -48,7 +48,6 @@ px4_add_board(
 		hardfault_log
 		i2cdetect
 		led_control
-		manual_control
 		mixer
 		motor_ramp
 		motor_test
@@ -35,7 +35,6 @@ px4_add_board(
 		imu/invensense/icm20649
 		imu/invensense/icm20689
 		imu/invensense/icm20948 # required for ak09916 mag
-		imu/invensense/icm42688p
 		irlock
 		lights # all available light drivers
 		lights/rgbled_pwm
@@ -100,7 +99,6 @@ px4_add_board(
 		hardfault_log
 		i2cdetect
 		led_control
-		manual_control
 		mft
 		mixer
 		motor_ramp
@@ -124,7 +122,7 @@ px4_add_board(
 		work_queue
 	EXAMPLES
 		fake_gps
-		#fake_imu
+		#fake_gyro
 		#fake_magnetometer
 		#fixedwing_control # Tutorial code from https://px4.io/dev/example_fixedwing_control
 		#hello
@@ -12,17 +12,11 @@ rm3100 -s -b 2 start

 # SPI4
 bmi088 -s -b 4 -A -R 2 start
-if !bmi088 -s -b 4 -G -R 2 start
-then
-	icm42688p -R 2 -s start
-fi
+bmi088 -s -b 4 -G -R 2 start
 ms5611 -s -b 4 start

 # SPI6
-if ! icm20649 -s -b 6 -R 2 start
-then
-	icm20689 -s -b 6 -R 2 start
-fi
+icm20649 -s -b 6 -R 2 start
 ms5611 -s -b 6 start

 # External compass on GPS1/I2C1: standard CUAV GPS/compass puck (with lights, safety button, and buzzer)
@@ -41,7 +41,7 @@ if("${PX4_BOARD_LABEL}" STREQUAL  "bootloader")
 			nuttx_drivers
 			bootloader
 	)
-	target_include_directories(drivers_board PRIVATE ${PX4_SOURCE_DIR}/platforms/nuttx/src/bootloader/common)
+	target_include_directories(drivers_board PRIVATE ${PX4_SOURCE_DIR}/platforms/nuttx/src/bootloader)

 else()
 	add_library(drivers_board
@@ -106,7 +106,7 @@ __EXPORT void board_peripheral_reset(int ms)
 __EXPORT void board_on_reset(int status)
 {
 	for (int i = 0; i < DIRECT_PWM_OUTPUT_CHANNELS; ++i) {
-		px4_arch_configgpio(PX4_MAKE_GPIO_INPUT(io_timer_channel_get_as_pwm_input(i)));
+		px4_arch_configgpio(PX4_MAKE_GPIO_INPUT_PULL_DOWN(io_timer_channel_get_as_pwm_input(i)));
 	}

 	if (status >= 0) {
@@ -46,7 +46,6 @@ constexpr px4_spi_bus_t px4_spi_buses[SPI_BUS_MAX_BUS_ITEMS] = {
 	initSPIBus(SPI::Bus::SPI4, {
 		initSPIDevice(DRV_ACC_DEVTYPE_BMI088, SPI::CS{GPIO::PortF, GPIO::Pin3}, SPI::DRDY{GPIO::PortB, GPIO::Pin15}),
 		initSPIDevice(DRV_GYR_DEVTYPE_BMI088, SPI::CS{GPIO::PortF, GPIO::Pin4}, SPI::DRDY{GPIO::PortB, GPIO::Pin14}),
-		initSPIDevice(DRV_IMU_DEVTYPE_ICM42688P, SPI::CS{GPIO::PortA, GPIO::Pin15}, SPI::DRDY{GPIO::PortB, GPIO::Pin15}),
 		initSPIDevice(DRV_BARO_DEVTYPE_MS5611, SPI::CS{GPIO::PortG, GPIO::Pin10}),
 	}),
 	initSPIBusExternal(SPI::Bus::SPI5, {
@@ -56,7 +55,6 @@ constexpr px4_spi_bus_t px4_spi_buses[SPI_BUS_MAX_BUS_ITEMS] = {
 	}),
 	initSPIBus(SPI::Bus::SPI6, {
 		initSPIDevice(DRV_IMU_DEVTYPE_ICM20649, SPI::CS{GPIO::PortI, GPIO::Pin12}, SPI::DRDY{GPIO::PortH, GPIO::Pin5}),
-		initSPIDevice(DRV_IMU_DEVTYPE_ICM20689, SPI::CS{GPIO::PortE, GPIO::Pin15}, SPI::DRDY{GPIO::PortH, GPIO::Pin5}),
 		initSPIDevice(DRV_BARO_DEVTYPE_MS5611, SPI::CS{GPIO::PortI, GPIO::Pin8}),
 	}),
 };
@@ -101,7 +101,6 @@ px4_add_board(
 		hardfault_log
 		i2cdetect
 		led_control
-		manual_control
 		mft
 		mixer
 		motor_ramp
@@ -126,7 +125,7 @@ px4_add_board(
 		work_queue
 	EXAMPLES
 		fake_gps
-		#fake_imu
+		#fake_gyro
 		#fake_magnetometer
 		#fixedwing_control # Tutorial code from https://px4.io/dev/example_fixedwing_control
 		#hello
@@ -36,7 +36,6 @@ px4_add_board(
 		imu/invensense/icm20649
 		imu/invensense/icm20689
 		imu/invensense/icm20948 # required for ak09916 mag
-		imu/invensense/icm42688p
 		irlock
 		lights # all available light drivers
 		lights/rgbled_pwm
@@ -101,7 +100,6 @@ px4_add_board(
 		hardfault_log
 		i2cdetect
 		led_control
-		manual_control
 		mft
 		mixer
 		motor_ramp
@@ -125,7 +123,7 @@ px4_add_board(
 		work_queue
 	EXAMPLES
 		fake_gps
-		#fake_imu
+		#fake_gyro
 		#fake_magnetometer
 		#fixedwing_control # Tutorial code from https://px4.io/dev/example_fixedwing_control
 		#hello
@@ -15,17 +15,11 @@ rm3100 -s -b 2 start

 # SPI4
 bmi088 -s -b 4 -A -R 2 start
-if !bmi088 -s -b 4 -G -R 2 start
-then
-	icm42688p -R 2 -s start
-fi
+bmi088 -s -b 4 -G -R 2 start
 ms5611 -s -b 4 start

 # SPI6
-if ! icm20649 -s -b 6 -R 2 start
-then
-	icm20689 -s -b 6 -R 2 start
-fi
+icm20649 -s -b 6 -R 2 start
 ms5611 -s -b 6 start

 # External compass on GPS1/I2C1: standard CUAV GPS/compass puck (with lights, safety button, and buzzer)
@@ -41,7 +41,7 @@ if("${PX4_BOARD_LABEL}" STREQUAL  "bootloader")
 			nuttx_drivers
 			bootloader
 	)
-	target_include_directories(drivers_board PRIVATE ${PX4_SOURCE_DIR}/platforms/nuttx/src/bootloader/common)
+	target_include_directories(drivers_board PRIVATE ${PX4_SOURCE_DIR}/platforms/nuttx/src/bootloader)

 else()
 	add_library(drivers_board
@@ -106,7 +106,7 @@ __EXPORT void board_peripheral_reset(int ms)
 __EXPORT void board_on_reset(int status)
 {
 	for (int i = 0; i < DIRECT_PWM_OUTPUT_CHANNELS; ++i) {
-		px4_arch_configgpio(PX4_MAKE_GPIO_INPUT(io_timer_channel_get_as_pwm_input(i)));
+		px4_arch_configgpio(PX4_MAKE_GPIO_INPUT_PULL_DOWN(io_timer_channel_get_as_pwm_input(i)));
 	}

 	if (status >= 0) {
@@ -47,7 +47,6 @@ constexpr px4_spi_bus_t px4_spi_buses[SPI_BUS_MAX_BUS_ITEMS] = {
 	initSPIBus(SPI::Bus::SPI4, {
 		initSPIDevice(DRV_ACC_DEVTYPE_BMI088, SPI::CS{GPIO::PortF, GPIO::Pin3}, SPI::DRDY{GPIO::PortB, GPIO::Pin15}),
 		initSPIDevice(DRV_GYR_DEVTYPE_BMI088, SPI::CS{GPIO::PortF, GPIO::Pin4}, SPI::DRDY{GPIO::PortB, GPIO::Pin14}),
-		initSPIDevice(DRV_IMU_DEVTYPE_ICM42688P, SPI::CS{GPIO::PortA, GPIO::Pin15}, SPI::DRDY{GPIO::PortB, GPIO::Pin15}),
 		initSPIDevice(DRV_BARO_DEVTYPE_MS5611, SPI::CS{GPIO::PortG, GPIO::Pin10}),
 	}),
 	initSPIBusExternal(SPI::Bus::SPI5, {
@@ -57,7 +56,6 @@ constexpr px4_spi_bus_t px4_spi_buses[SPI_BUS_MAX_BUS_ITEMS] = {
 	}),
 	initSPIBus(SPI::Bus::SPI6, {
 		initSPIDevice(DRV_IMU_DEVTYPE_ICM20649, SPI::CS{GPIO::PortI, GPIO::Pin12}, SPI::DRDY{GPIO::PortH, GPIO::Pin5}),
-		initSPIDevice(DRV_IMU_DEVTYPE_ICM20689, SPI::CS{GPIO::PortE, GPIO::Pin15}, SPI::DRDY{GPIO::PortH, GPIO::Pin5}),
 		initSPIDevice(DRV_BARO_DEVTYPE_MS5611, SPI::CS{GPIO::PortI, GPIO::Pin8}),
 	}),
 };
@@ -59,7 +59,7 @@ px4_add_board(
 		uavcan
 	MODULES
 		airspeed_selector
-		#attitude_estimator_q
+		attitude_estimator_q
 		battery_status
 		camera_feedback
 		commander
@@ -75,7 +75,7 @@ px4_add_board(
 		land_detector
 		landing_target_estimator
 		load_mon
-		#local_position_estimator
+		local_position_estimator
 		logger
 		mavlink
 		mc_att_control
@@ -102,7 +102,6 @@ px4_add_board(
 		hardfault_log
 		i2cdetect
 		led_control
-		manual_control
 		mft
 		mixer
 		motor_ramp
@@ -127,7 +126,7 @@ px4_add_board(
 		work_queue
 	EXAMPLES
 		fake_gps
-		#fake_imu
+		#fake_gyro
 		#fake_magnetometer
 		#fixedwing_control # Tutorial code from https://px4.io/dev/example_fixedwing_control
 		#hello
@@ -97,7 +97,6 @@ px4_add_board(
 		hardfault_log
 		i2cdetect
 		led_control
-		manual_control
 		mft
 		mixer
 		motor_ramp
@@ -121,7 +120,7 @@ px4_add_board(
 		work_queue
 	EXAMPLES
 		fake_gps
-		#fake_imu
+		#fake_gyro
 		#fake_magnetometer
 		#fixedwing_control # Tutorial code from https://px4.io/dev/example_fixedwing_control
 		#hello
@@ -117,7 +117,6 @@ CONFIG_NSH_ROMFSETC=y
 CONFIG_NSH_ROMFSSECTSIZE=128
 CONFIG_NSH_STRERROR=y
 CONFIG_NSH_VARS=y
-CONFIG_OTG_ID_GPIO_DISABLE=y
 CONFIG_PIPES=y
 CONFIG_PREALLOC_TIMERS=50
 CONFIG_PRIORITY_INHERITANCE=y
@@ -116,7 +116,6 @@ CONFIG_NSH_ROMFSETC=y
 CONFIG_NSH_ROMFSSECTSIZE=128
 CONFIG_NSH_STRERROR=y
 CONFIG_NSH_VARS=y
-CONFIG_OTG_ID_GPIO_DISABLE=y
 CONFIG_PIPES=y
 CONFIG_PREALLOC_TIMERS=50
 CONFIG_PRIORITY_INHERITANCE=y
@@ -41,7 +41,7 @@ if("${PX4_BOARD_LABEL}" STREQUAL  "bootloader")
 			nuttx_drivers
 			bootloader
 	)
-	target_include_directories(drivers_board PRIVATE ${PX4_SOURCE_DIR}/platforms/nuttx/src/bootloader/common)
+	target_include_directories(drivers_board PRIVATE ${PX4_SOURCE_DIR}/platforms/nuttx/src/bootloader)

 else()
 	add_library(drivers_board
@@ -97,7 +97,7 @@ __EXPORT void board_peripheral_reset(int ms)
 __EXPORT void board_on_reset(int status)
 {
 	for (int i = 0; i < DIRECT_PWM_OUTPUT_CHANNELS; ++i) {
-		px4_arch_configgpio(PX4_MAKE_GPIO_INPUT(io_timer_channel_get_as_pwm_input(i)));
+		px4_arch_configgpio(PX4_MAKE_GPIO_INPUT_PULL_DOWN(io_timer_channel_get_as_pwm_input(i)));
 	}

 	if (status >= 0) {
@@ -98,7 +98,6 @@ px4_add_board(
 		hardfault_log
 		i2cdetect
 		led_control
-		manual_control
 		mft
 		mixer
 		motor_ramp
@@ -123,7 +122,7 @@ px4_add_board(
 		work_queue
 	EXAMPLES
 		fake_gps
-		#fake_imu
+		#fake_gyro
 		#fake_magnetometer
 		#fixedwing_control # Tutorial code from https://px4.io/dev/example_fixedwing_control
 		#hello
@@ -95,7 +95,6 @@ px4_add_board(
 		hardfault_log
 		i2cdetect
 		led_control
-		manual_control
 		mft
 		mixer
 		motor_ramp
@@ -119,7 +118,7 @@ px4_add_board(
 		work_queue
 	EXAMPLES
 		fake_gps
-		#fake_imu
+		#fake_gyro
 		#fake_magnetometer
 		#fixedwing_control # Tutorial code from https://px4.io/dev/example_fixedwing_control
 		#hello
@@ -117,7 +117,6 @@ CONFIG_NSH_ROMFSETC=y
 CONFIG_NSH_ROMFSSECTSIZE=128
 CONFIG_NSH_STRERROR=y
 CONFIG_NSH_VARS=y
-CONFIG_OTG_ID_GPIO_DISABLE=y
 CONFIG_PIPES=y
 CONFIG_PREALLOC_TIMERS=50
 CONFIG_PRIORITY_INHERITANCE=y
@@ -116,7 +116,6 @@ CONFIG_NSH_ROMFSETC=y
 CONFIG_NSH_ROMFSSECTSIZE=128
 CONFIG_NSH_STRERROR=y
 CONFIG_NSH_VARS=y
-CONFIG_OTG_ID_GPIO_DISABLE=y
 CONFIG_PIPES=y
 CONFIG_PREALLOC_TIMERS=50
 CONFIG_PRIORITY_INHERITANCE=y
@@ -97,7 +97,7 @@ __EXPORT void board_peripheral_reset(int ms)
 __EXPORT void board_on_reset(int status)
 {
 	for (int i = 0; i < DIRECT_PWM_OUTPUT_CHANNELS; ++i) {
-		px4_arch_configgpio(PX4_MAKE_GPIO_INPUT(io_timer_channel_get_as_pwm_input(i)));
+		px4_arch_configgpio(PX4_MAKE_GPIO_INPUT_PULL_DOWN(io_timer_channel_get_as_pwm_input(i)));
 	}

 	if (status >= 0) {
@@ -96,7 +96,6 @@ px4_add_board(
 		hardfault_log
 		i2cdetect
 		led_control
-		manual_control
 		mft
 		mixer
 		motor_ramp
@@ -121,7 +120,7 @@ px4_add_board(
 		work_queue
 	EXAMPLES
 		fake_gps
-		#fake_imu
+		#fake_gyro
 		#fake_magnetometer
 		#fixedwing_control # Tutorial code from https://px4.io/dev/example_fixedwing_control
 		#hello
@@ -75,7 +75,6 @@ px4_add_board(
 		dyn
 		esc_calib
 		led_control
-		manual_control
 		mixer
 		motor_ramp
 		motor_test
@@ -96,7 +95,7 @@ px4_add_board(
 	EXAMPLES
 		dyn_hello # dynamically loading modules example
 		fake_gps
-		fake_imu
+		fake_gyro
 		fake_magnetometer
 		fixedwing_control # Tutorial code from https://px4.io/dev/example_fixedwing_control
 		hello
@@ -1,14 +0,0 @@
-include (${CMAKE_CURRENT_LIST_DIR}/uavcan_board_identity)
-
-px4_add_board(
-	PLATFORM nuttx
-	VENDOR freefly
-	MODEL can-rtk-gps
-	LABEL canbootloader
-	TOOLCHAIN arm-none-eabi
-	ARCHITECTURE cortex-m7
-	CONSTRAINED_MEMORY
-	DRIVERS
-		bootloaders
-		lights/rgbled_ncp5623c
-)
@@ -1,38 +0,0 @@
-include (${CMAKE_CURRENT_LIST_DIR}/uavcan_board_identity)
-
-px4_add_board(
-	PLATFORM nuttx
-	VENDOR freefly
-	MODEL can-rtk-gps
-	LABEL default
-	TOOLCHAIN arm-none-eabi
-	ARCHITECTURE cortex-m7
-	#CONSTRAINED_FLASH
-	ROMFSROOT cannode
-	UAVCAN_INTERFACES 1
-	DRIVERS
-		barometer/bmp388
-		bootloaders
-		gps
-		lights/rgbled_ncp5623c
-		magnetometer/isentek/ist8310
-		imu/st/lsm9ds1
-		uavcannode
-	MODULES
-		#ekf2
-		load_mon
-		sensors
-	SYSTEMCMDS
-		led_control
-		manual_control
-		mft
-		mtd
-		param
-		perf
-		reboot
-		system_time
-		top
-#		topic_listener
-		ver
-		work_queue
-)
@@ -1,13 +0,0 @@
-{
-    "board_id": 85,
-    "magic": "PX4FWv1",
-    "description": "Firmware for the FreeFly RTK GPS",
-    "image": "",
-    "build_time": 0,
-    "summary": "FFRTK",
-    "version": "0.1",
-    "image_size": 0,
-    "image_maxsize": 2080768,
-    "git_identity": "",
-    "board_revision": 0
-}
@@ -1,14 +0,0 @@
-#!/bin/sh
-#
-# board sensors init
-#------------------------------------------------------------------------------
-
-rgbled_ncp5623c -I -b 1 -a 0x39 start
-
-ist8310 start -I -b 1 -a 0x0E
-
-bmp388 start -I -b b -a 0x77
-
-safety_button start
-
-gps start -d /dev/ttyS0 -g 115200 -p ubx
@@ -1,67 +0,0 @@
-#
-# This file is autogenerated: PLEASE DO NOT EDIT IT.
-#
-# You can use "make menuconfig" to make any modifications to the installed .config file.
-# You can then do "make savedefconfig" to generate a new defconfig file that includes your
-# modifications.
-#
-CONFIG_ARCH="arm"
-CONFIG_ARCH_BOARD_CUSTOM=y
-CONFIG_ARCH_BOARD_CUSTOM_DIR="../nuttx-config"
-CONFIG_ARCH_BOARD_CUSTOM_DIR_RELPATH=y
-CONFIG_ARCH_BOARD_CUSTOM_NAME="px4"
-CONFIG_ARCH_CHIP="stm32f7"
-CONFIG_ARCH_CHIP_STM32F722RE=y
-CONFIG_ARCH_CHIP_STM32F7=y
-CONFIG_ARCH_INTERRUPTSTACK=4096
-CONFIG_ARMV7M_MEMCPY=y
-CONFIG_ARMV7M_USEBASEPRI=y
-CONFIG_BINFMT_DISABLE=y
-CONFIG_BOARD_CUSTOM_LEDS=y
-CONFIG_BOARD_LOOPSPERMSEC=16717
-CONFIG_C99_BOOL8=y
-CONFIG_CLOCK_MONOTONIC=y
-CONFIG_DEBUG_FULLOPT=y
-CONFIG_DEBUG_SYMBOLS=y
-CONFIG_DEFAULT_SMALL=y
-CONFIG_DISABLE_MOUNTPOINT=y
-CONFIG_DISABLE_MQUEUE=y
-CONFIG_DISABLE_PTHREAD=y
-CONFIG_EXPERIMENTAL=y
-CONFIG_FDCLONE_DISABLE=y
-CONFIG_FDCLONE_STDIO=y
-CONFIG_HAVE_CXX=y
-CONFIG_HAVE_CXXINITIALIZE=y
-CONFIG_I2C=y
-CONFIG_I2C_POLLED=y
-CONFIG_I2C_RESET=y
-CONFIG_IDLETHREAD_STACKSIZE=4096
-CONFIG_LIBC_FLOATINGPOINT=y
-CONFIG_LIBC_LONG_LONG=y
-CONFIG_LIBC_STRERROR=y
-CONFIG_LIB_BOARDCTL=y
-CONFIG_MAX_TASKS=0
-CONFIG_MM_REGIONS=2
-CONFIG_NAME_MAX=0
-CONFIG_NUNGET_CHARS=0
-CONFIG_PREALLOC_TIMERS=0
-CONFIG_PTHREAD_STACK_MIN=512
-CONFIG_RAM_SIZE=262144
-CONFIG_RAM_START=0x20010000
-CONFIG_RAW_BINARY=y
-CONFIG_SDCLONE_DISABLE=y
-CONFIG_SIG_DEFAULT=y
-CONFIG_SIG_SIGALRM_ACTION=y
-CONFIG_SIG_SIGUSR1_ACTION=y
-CONFIG_SIG_SIGUSR2_ACTION=y
-CONFIG_STACK_COLORATION=y
-CONFIG_START_DAY=30
-CONFIG_START_MONTH=11
-CONFIG_STDIO_DISABLE_BUFFERING=y
-CONFIG_STM32F7_CAN1=y
-CONFIG_STM32F7_I2C1=y
-CONFIG_STM32F7_PROGMEM=y
-CONFIG_STM32F7_TIM8=y
-CONFIG_TASK_NAME_SIZE=0
-CONFIG_USEC_PER_TICK=1000
-CONFIG_USERMAIN_STACKSIZE=4096
@@ -1,267 +0,0 @@
-/************************************************************************************
- * configs/px4fmu/include/board.h
- * include/arch/board/board.h
- *
- *   Copyright (C) 2009 Gregory Nutt. All rights reserved.
- *   Author: Gregory Nutt <gnutt@nuttx.org>
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- * 3. Neither the name NuttX nor the names of its contributors may be
- *    used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ************************************************************************************/
-#pragma once
-
-#include "board_dma_map.h"
-
-#include <nuttx/config.h>
-#ifndef __ASSEMBLY__
-# include <stdint.h>
-#endif
-
-#include "stm32_rcc.h"
-
-/* HSI - 16 MHz RC factory-trimmed
- * LSI - 32 KHz RC
- * HSE - 16 MHz Crystal
- * LSE - not installed
- */
-
-#define STM32_BOARD_XTAL        16000000ul
-
-#define STM32_HSI_FREQUENCY     16000000ul
-#define STM32_LSI_FREQUENCY     32000
-#define STM32_HSE_FREQUENCY     STM32_BOARD_XTAL
-#define STM32_LSE_FREQUENCY     0
-
-/* Main PLL Configuration.
- *
- * PLL source is HSE = 16,000,000
- *
- * PLL_VCO = (STM32_HSE_FREQUENCY / PLLM) * PLLN
- * Subject to:
- *
- *     2 <= PLLM <= 63
- *   192 <= PLLN <= 432
- *   192 MHz <= PLL_VCO <= 432MHz
- *
- * SYSCLK  = PLL_VCO / PLLP
- * Subject to
- *
- *   PLLP = {2, 4, 6, 8}
- *   SYSCLK <= 216 MHz
- *
- * USB OTG FS, SDMMC and RNG Clock = PLL_VCO / PLLQ
- * Subject to
- *   The USB OTG FS requires a 48 MHz clock to work correctly. The SDMMC
- *   and the random number generator need a frequency lower than or equal
- *   to 48 MHz to work correctly.
- *
- * 2 <= PLLQ <= 15
- */
-
-/* Highest SYSCLK with USB OTG FS clock = 48 MHz
- *
- * PLL_VCO = (16,000,000 / 8) * 216 = 432 MHz
- * SYSCLK  = 432 MHz / 2 = 216 MHz
- * USB OTG FS, SDMMC and RNG Clock = 432 MHz / 9 = 48 MHz
- */
-
-#define STM32_PLLCFG_PLLM       RCC_PLLCFG_PLLM(8)
-#define STM32_PLLCFG_PLLN       RCC_PLLCFG_PLLN(216)
-#define STM32_PLLCFG_PLLP       RCC_PLLCFG_PLLP_2
-#define STM32_PLLCFG_PLLQ       RCC_PLLCFG_PLLQ(9)
-
-#define STM32_VCO_FREQUENCY     ((STM32_HSE_FREQUENCY / 8) * 216)
-#define STM32_SYSCLK_FREQUENCY  (STM32_VCO_FREQUENCY / 2)
-#define STM32_OTGFS_FREQUENCY   (STM32_VCO_FREQUENCY / 9)
-
-/* Configure factors for  PLLSAI clock */
-
-#define CONFIG_STM32F7_PLLSAI 1
-#define STM32_RCC_PLLSAICFGR_PLLSAIN    RCC_PLLSAICFGR_PLLSAIN(192)
-#define STM32_RCC_PLLSAICFGR_PLLSAIP    RCC_PLLSAICFGR_PLLSAIP(8)
-#define STM32_RCC_PLLSAICFGR_PLLSAIQ    RCC_PLLSAICFGR_PLLSAIQ(4)
-#define STM32_RCC_PLLSAICFGR_PLLSAIR    RCC_PLLSAICFGR_PLLSAIR(2)
-
-/* Configure Dedicated Clock Configuration Register */
-
-#define STM32_RCC_DCKCFGR1_PLLI2SDIVQ  RCC_DCKCFGR1_PLLI2SDIVQ(1)
-#define STM32_RCC_DCKCFGR1_PLLSAIDIVQ  RCC_DCKCFGR1_PLLSAIDIVQ(1)
-#define STM32_RCC_DCKCFGR1_PLLSAIDIVR  RCC_DCKCFGR1_PLLSAIDIVR(0)
-#define STM32_RCC_DCKCFGR1_SAI1SRC     RCC_DCKCFGR1_SAI1SEL(0)
-#define STM32_RCC_DCKCFGR1_SAI2SRC     RCC_DCKCFGR1_SAI2SEL(0)
-#define STM32_RCC_DCKCFGR1_TIMPRESRC   0
-#define STM32_RCC_DCKCFGR1_DFSDM1SRC   0
-#define STM32_RCC_DCKCFGR1_ADFSDM1SRC  0
-
-
-
-/* Configure factors for  PLLI2S clock */
-
-#define CONFIG_STM32F7_PLLI2S 1
-#define STM32_RCC_PLLI2SCFGR_PLLI2SN   RCC_PLLI2SCFGR_PLLI2SN(192)
-#define STM32_RCC_PLLI2SCFGR_PLLI2SP   RCC_PLLI2SCFGR_PLLI2SP(2)
-#define STM32_RCC_PLLI2SCFGR_PLLI2SQ   RCC_PLLI2SCFGR_PLLI2SQ(2)
-#define STM32_RCC_PLLI2SCFGR_PLLI2SR   RCC_PLLI2SCFGR_PLLI2SR(2)
-
-/* Configure Dedicated Clock Configuration Register 2 */
-
-#define STM32_RCC_DCKCFGR2_USART1SRC  RCC_DCKCFGR2_USART1SEL_APB
-#define STM32_RCC_DCKCFGR2_USART2SRC  RCC_DCKCFGR2_USART2SEL_APB
-#define STM32_RCC_DCKCFGR2_UART4SRC   RCC_DCKCFGR2_UART4SEL_APB
-#define STM32_RCC_DCKCFGR2_UART5SRC   RCC_DCKCFGR2_UART5SEL_APB
-#define STM32_RCC_DCKCFGR2_USART6SRC  RCC_DCKCFGR2_USART6SEL_APB
-#define STM32_RCC_DCKCFGR2_UART7SRC   RCC_DCKCFGR2_UART7SEL_APB
-#define STM32_RCC_DCKCFGR2_UART8SRC   RCC_DCKCFGR2_UART8SEL_APB
-#define STM32_RCC_DCKCFGR2_I2C1SRC    RCC_DCKCFGR2_I2C1SEL_HSI
-#define STM32_RCC_DCKCFGR2_I2C2SRC    RCC_DCKCFGR2_I2C2SEL_HSI
-#define STM32_RCC_DCKCFGR2_I2C3SRC    RCC_DCKCFGR2_I2C3SEL_HSI
-#define STM32_RCC_DCKCFGR2_I2C4SRC    RCC_DCKCFGR2_I2C4SEL_HSI
-#define STM32_RCC_DCKCFGR2_LPTIM1SRC  RCC_DCKCFGR2_LPTIM1SEL_APB
-#define STM32_RCC_DCKCFGR2_CECSRC     RCC_DCKCFGR2_CECSEL_HSI
-#define STM32_RCC_DCKCFGR2_CK48MSRC   RCC_DCKCFGR2_CK48MSEL_PLL
-#define STM32_RCC_DCKCFGR2_SDMMCSRC   RCC_DCKCFGR2_SDMMCSEL_48MHZ
-#define STM32_RCC_DCKCFGR2_SDMMC2SRC  RCC_DCKCFGR2_SDMMC2SEL_48MHZ
-#define STM32_RCC_DCKCFGR2_DSISRC     RCC_DCKCFGR2_DSISEL_PHY
-
-
-/* Several prescalers allow the configuration of the two AHB buses, the
- * high-speed APB (APB2) and the low-speed APB (APB1) domains. The maximum
- * frequency of the two AHB buses is 216 MHz while the maximum frequency of
- * the high-speed APB domains is 108 MHz. The maximum allowed frequency of
- * the low-speed APB domain is 54 MHz.
- */
-
-/* AHB clock (HCLK) is SYSCLK (216 MHz) */
-
-#define STM32_RCC_CFGR_HPRE     RCC_CFGR_HPRE_SYSCLK  /* HCLK  = SYSCLK / 1 */
-#define STM32_HCLK_FREQUENCY    STM32_SYSCLK_FREQUENCY
-#define STM32_BOARD_HCLK        STM32_HCLK_FREQUENCY  /* same as above, to satisfy compiler */
-
-/* APB1 clock (PCLK1) is HCLK/4 (54 MHz) */
-
-#define STM32_RCC_CFGR_PPRE1    RCC_CFGR_PPRE1_HCLKd4     /* PCLK1 = HCLK / 4 */
-#define STM32_PCLK1_FREQUENCY   (STM32_HCLK_FREQUENCY/4)
-
-/* Timers driven from APB1 will be twice PCLK1 */
-
-#define STM32_APB1_TIM2_CLKIN   (2*STM32_PCLK1_FREQUENCY)
-#define STM32_APB1_TIM3_CLKIN   (2*STM32_PCLK1_FREQUENCY)
-#define STM32_APB1_TIM4_CLKIN   (2*STM32_PCLK1_FREQUENCY)
-#define STM32_APB1_TIM5_CLKIN   (2*STM32_PCLK1_FREQUENCY)
-#define STM32_APB1_TIM6_CLKIN   (2*STM32_PCLK1_FREQUENCY)
-#define STM32_APB1_TIM7_CLKIN   (2*STM32_PCLK1_FREQUENCY)
-#define STM32_APB1_TIM12_CLKIN  (2*STM32_PCLK1_FREQUENCY)
-#define STM32_APB1_TIM13_CLKIN  (2*STM32_PCLK1_FREQUENCY)
-#define STM32_APB1_TIM14_CLKIN  (2*STM32_PCLK1_FREQUENCY)
-
-/* APB2 clock (PCLK2) is HCLK/2 (108MHz) */
-
-#define STM32_RCC_CFGR_PPRE2    RCC_CFGR_PPRE2_HCLKd2     /* PCLK2 = HCLK / 2 */
-#define STM32_PCLK2_FREQUENCY   (STM32_HCLK_FREQUENCY/2)
-
-/* Timers driven from APB2 will be twice PCLK2 */
-
-#define STM32_APB2_TIM1_CLKIN   (2*STM32_PCLK2_FREQUENCY)
-#define STM32_APB2_TIM8_CLKIN   (2*STM32_PCLK2_FREQUENCY)
-#define STM32_APB2_TIM9_CLKIN   (2*STM32_PCLK2_FREQUENCY)
-#define STM32_APB2_TIM10_CLKIN  (2*STM32_PCLK2_FREQUENCY)
-#define STM32_APB2_TIM11_CLKIN  (2*STM32_PCLK2_FREQUENCY)
-
-
-/* FLASH wait states
- *
- *  --------- ---------- -----------
- *  VDD       MAX SYSCLK WAIT STATES
- *  --------- ---------- -----------
- *  1.7-2.1 V   180 MHz    8
- *  2.1-2.4 V   216 MHz    9
- *  2.4-2.7 V   216 MHz    8
- *  2.7-3.6 V   216 MHz    7
- *  --------- ---------- -----------
- */
-
-#define BOARD_FLASH_WAITSTATES 7
-
-/* LED definitions ******************************************************************/
-/* The board has numerous LEDs but 1, RED LED
-
- * If CONFIG_ARCH_LEDS is not defined, then the user can control the LEDs in any way.
- * The following definitions are used to access individual LEDs.
- */
-
-
-/* If CONFIG_ARCH_LEDS is defined, the usage by the board port is defined in
- * include/board.h and src/stm32_leds.c. The LEDs are used to encode OS-related
- * events as follows:
- *
- *
- *   SYMBOL                     Meaning                      LED state
- *                                                        Red
- *   ----------------------  --------------------------  ------ */
-
-#define LED_STARTED        0 /* NuttX has been started   OFF    */
-#define LED_HEAPALLOCATE   1 /* Heap has been allocated  OFF    */
-#define LED_IRQSENABLED    2 /* Interrupts enabled       OFF    */
-#define LED_STACKCREATED   3 /* Idle stack created       OFF    */
-#define LED_INIRQ          4 /* In an interrupt          N/C    */
-#define LED_SIGNAL         5 /* In a signal handler      N/C    */
-#define LED_ASSERTION      6 /* An assertion failed      GLOW   N/C   GLOW */
-#define LED_PANIC          7 /* The system has crashed   Blink  OFF   N/C  */
-#define LED_IDLE           8 /* MCU is is sleep mode     ON     OFF   OFF  */
-
-
-/* UARTs */
-
-#define GPIO_USART2_TX   GPIO_USART2_TX_1   /* PA2  */
-#define GPIO_USART2_RX   GPIO_USART2_RX_1   /* PA3  */
-
-#define GPIO_USART3_TX   GPIO_USART3_TX_1   /* PB10 */
-#define GPIO_USART3_RX   GPIO_USART3_RX_1   /* PB11 */
-
-
-/* CAN */
-
-#define GPIO_CAN1_RX	GPIO_CAN1_RX_2      /* PB8  */
-#define GPIO_CAN1_TX	GPIO_CAN1_TX_2      /* PB9  */
-
-
-/* I2C */
-
-#define GPIO_I2C1_SCL	GPIO_I2C1_SCL_1     /* PB6  */
-#define GPIO_I2C1_SDA	GPIO_I2C1_SDA_1     /* PB7  */
-
-#define GPIO_I2C3_SCL	GPIO_I2C3_SCL_1     /* PA8  */
-#define GPIO_I2C3_SDA	GPIO_I2C3_SDA_1     /* PC9  */
-
-
-/* SPI */
-
-#define GPIO_SPI3_MISO  GPIO_SPI3_MISO_2    /* PC11 */
-#define GPIO_SPI3_MOSI  GPIO_SPI3_MOSI_3    /* PC12 */
-#define GPIO_SPI3_SCK   GPIO_SPI3_SCK_1     /* PB3  */
-
@@ -1,102 +0,0 @@
-/****************************************************************************
- *
- *   Copyright (c) 2021 PX4 Development Team. All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- * 3. Neither the name PX4 nor the names of its contributors may be
- *    used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ****************************************************************************/
-
-#pragma once
-
-/*
-|    DMA1    | Stream 0         | Stream 1         | Stream 2         | Stream 3         | Stream 4         | Stream 5         | Stream 6         | Stream 7         |
-|------------|------------------|------------------|------------------|------------------|------------------|------------------|------------------|------------------|
-| Channel 0  | SPI3_RX_1        | SPDIFRX_DT       | SPI3_RX_2        | SPI2_RX          | SPI2_TX          | SPI3_TX_1        | SPDIFRX_CS       | SPI3_TX_2        |
-| Channel 1  | I2C1_RX          | I2C3_RX          | TIM7_UP_1        | -                | TIM7_UP_2        |  I2C1_RX_1       | I2C1_TX          | I2C1_TX_1        |
-| Channel 2  | TIM4_CH1         | -                | I2C4_RX          | TIM4_CH2         | -                | I2C4_RX          | TIM4_UP          | TIM4_CH3         |
-| Channel 3  | -                | TIM2_UP_1        | I2C3_RX_1        | -                | I2C3_TX          | TIM2_CH1         | TIM2_CH2         | TIM2_UP_2        |
-|            |                  |   TIM2_CH3       |                  |                  |                  |                  |   TIM2_CH4_1     |   TIM2_CH4_2     |
-| Channel 4  | UART5_RX         | USART3_RX        | UART4_RX         | USART3_TX_1      | UART4_TX         | USART2_RX        | USART2_TX        | UART5_TX         |
-| Channel 5  | UART8_TX         | UART7_TX         | TIM3_CH4         | UART7_RX         | TIM3_CH1         | TIM3_CH2         | UART8_RX         | TIM3_CH3         |
-|            |                  |                  |   TIM3_UP        |                  |   TIM3_TRIG      |                  |                  |                  |
-| Channel 6  | TIM5_CH3         | TIM5_CH4_1       | TIM5_CH1         | TIM5_CH4_2       | TIM5_CH2         | -                | TIM5_UP_2        | -                |
-|            |   TIM5_UP_1      |   TIM5_TRIG_1    |                  |   TIM5_TRIG_2    |                  |                  |                  |                  |
-| Channel 7  | -                | TIM6_UP          | I2C2_RX          | I2C2_RX_1        | USART3_TX_2      | DAC1             | DAC2             | I2C2_TX          |
-| Channel 8  | I2C3_TX          | I2C4_RX          | -                | -                | I2C2_TX          | -                | I2C4_TX          | -                |
-| Channel 9  | -                | SPI2_RX          | -                | -                | -                | -                | SPI2_TX          | -                |
-|            |                  |                  |                  |                  |                  |                  |                  |                  |
-| Usage      | SPI3_RX_1        |                  |                  |                  |                  | USART2_RX        | USART2_TX        | SPI3_TX_2        |
-
-
-|    DMA2    | Stream 0         | Stream 1         | Stream 2         | Stream 3         | Stream 4         | Stream 5         | Stream 6         | Stream 7         |
-|------------|------------------|------------------|------------------|------------------|------------------|------------------|------------------|------------------|
-| Channel 0  | ADC1_1           | SAI1_A           | TIM8_CH1_1       | SAI1_A_1         | ADC1_2           | SAI1_B_1         | TIM1_CH1_1       | SAI2_B_2         |
-|            |                  |                  |   TIM8_CH2_1     |                  |                  |                  |   TIM1_CH2_1     |                  |
-|            |                  |                  |   TIM8_CH3_1     |                  |                  |                  |   TIM1_CH3_1     |                  |
-| Channel 1  | -                | DCMI_1           | ADC2_1           | ADC2_2           | SAI1_B           | SPI6_TX          | SPI6_RX          | DCMI_2           |
-| Channel 2  | ADC3_1           | ADC3_2           | -                | SPI5_RX_1        | SPI5_TX_1        | CRYP_OUT         | CRYP_IN          | HASH_IN          |
-| Channel 3  | SPI1_RX_1        | -                | SPI1_RX_2        | SPI1_TX_1        | SAI2_A           | SPI1_TX_2        | SAI2_B           | QUADSPI          |
-| Channel 4  | SPI4_RX_1        | SPI4_TX_1        | USART1_RX_1      | SDMMC1_1         | -                | USART1_RX_2      | SDMMC1_2         | USART1_TX        |
-| Channel 5  | -                | USART6_RX_1      | USART6_RX_2      | SPI4_RX_2        | SPI4_TX_2        | -                | USART6_TX_1      | USART6_TX_2      |
-| Channel 6  | TIM1_TRIG_1      | TIM1_CH1_2       | TIM1_CH2_2       | TIM1_CH1         | TIM1_CH4         | TIM1_UP          | TIM1_CH3_2       | -                |
-|            |                  |                  |                  |                  |   TIM1_TRIG_2    |                  |                  |                  |
-|            |                  |                  |                  |                  |   TIM1_COM       |                  |                  |                  |
-| Channel 7  | -                | TIM8_UP          | TIM8_CH1_2       | TIM8_CH2_2       | TIM8_CH3_2       | SPI5_RX_2        | SPI5_TX_2        | TIM8_CH4         |
-|            |                  |                  |                  |                  |                  |                  |                  |   TIM8_TRIG      |
-|            |                  |                  |                  |                  |                  |                  |                  |   TIM8_COM       |
-| Channel 8  | DSFDM1_FLT0      | DSFDM1_FLT1      | DSFDM1_FLT2      | DSFDM1_FLT3      | DSFDM1_FLT0      | DSFDM1_FLT1      | DSFDM1_FLT2      | DSFDM1_FLT3      |
-| Channel 9  | JPEG_IN          | JPEG_OUT         | SPI4_TX          | JPEG_IN          | JPEG_OUT         | SPI5_RX          | -                | -                |
-| Channel 10 | SAI1_B           | SAI2_B           | SAI2_A           | -                | -                | -                | SAI1_A           | -                |
-| Channel 11 | SDMMC2           | -                | QUADSPI          | -                | -                | SDMMC2           | -                | -                |
-|            |                  |                  |                  |                  |                  |                  |                  |                  |
-| Usage      | SPI4_RX_1        | TIM8_UP          |                  |                  | SPI4_TX_2        | TIM1_UP          |                  |                  |
- */
-
-// DMA1 Channel/Stream Selections
-//--------------------------------------------//---------------------------//----------------
-//      SPI3_RX_1                             // DMA1, Stream 0, Channel 0
-//      AVAILABLE                             // DMA1, Stream 1
-//      AVAILABLE                             // DMA1, Stream 1
-//      AVAILABLE                             // DMA1, Stream 3
-//      AVAILABLE                             // DMA1, Stream 4
-//      DMAMAP_USART2_RX                      // DMA1, Stream 5, Channel 4
-//      DMAMAP_USART2_TX                      // DMA1, Stream 6, Channel 4
-//      SPI3_TX_2                             // DMA1, Stream 7, Channel 0
-
-
-//  DMA2 Channel/Stream Selections
-//--------------------------------------------//---------------------------//----------------
-//      AVAILABLE                             // DMA1, Stream 0
-//      AVAILABLE                             // DMA1, Stream 1
-#define DMAMAP_USART1_RX    USART1_RX_1       // DMA1, Stream 2, Channel 4
-//      AVAILABLE                             // DMA1, Stream 3
-//      AVAILABLE                             // DMA1, Stream 4
-//      AVAILABLE                             // DMA1, Stream 5
-//      AVAILABLE                             // DMA1, Stream 6
-//      DMAMAP_USART1_TX    USART1_TX         // DMA1, Stream 7, Channel 5
-
@@ -1,176 +0,0 @@
-#
-# This file is autogenerated: PLEASE DO NOT EDIT IT.
-#
-# You can use "make menuconfig" to make any modifications to the installed .config file.
-# You can then do "make savedefconfig" to generate a new defconfig file that includes your
-# modifications.
-#
-# CONFIG_DISABLE_OS_API is not set
-# CONFIG_DISABLE_PSEUDOFS_OPERATIONS is not set
-# CONFIG_NSH_DISABLEBG is not set
-# CONFIG_NSH_DISABLESCRIPT is not set
-# CONFIG_NSH_DISABLE_DF is not set
-# CONFIG_NSH_DISABLE_EXEC is not set
-# CONFIG_NSH_DISABLE_EXIT is not set
-# CONFIG_NSH_DISABLE_GET is not set
-# CONFIG_NSH_DISABLE_ITEF is not set
-# CONFIG_NSH_DISABLE_LOOPS is not set
-# CONFIG_NSH_DISABLE_SEMICOLON is not set
-# CONFIG_NSH_DISABLE_TIME is not set
-CONFIG_ARCH="arm"
-CONFIG_ARCH_BOARD_CUSTOM=y
-CONFIG_ARCH_BOARD_CUSTOM_DIR="../nuttx-config"
-CONFIG_ARCH_BOARD_CUSTOM_DIR_RELPATH=y
-CONFIG_ARCH_BOARD_CUSTOM_NAME="px4"
-CONFIG_ARCH_CHIP="stm32f7"
-CONFIG_ARCH_CHIP_STM32F722RE=y
-CONFIG_ARCH_CHIP_STM32F7=y
-CONFIG_ARCH_INTERRUPTSTACK=512
-CONFIG_ARCH_STACKDUMP=y
-CONFIG_ARMV7M_BASEPRI_WAR=y
-CONFIG_ARMV7M_DCACHE=y
-CONFIG_ARMV7M_DTCM=y
-CONFIG_ARMV7M_ICACHE=y
-CONFIG_ARMV7M_MEMCPY=y
-CONFIG_ARMV7M_USEBASEPRI=y
-CONFIG_BOARDCTL_RESET=y
-CONFIG_BOARD_LOOPSPERMSEC=22114
-CONFIG_BOARD_RESET_ON_ASSERT=2
-CONFIG_BUILTIN=y
-CONFIG_C99_BOOL8=y
-CONFIG_CDCACM=y
-CONFIG_CDCACM_PRODUCTID=0x0016
-CONFIG_CDCACM_PRODUCTSTR="PX4 FreeFly RTK GPS"
-CONFIG_CDCACM_RXBUFSIZE=600
-CONFIG_CDCACM_TXBUFSIZE=12000
-CONFIG_CDCACM_VENDORID=0x26ac
-CONFIG_CDCACM_VENDORSTR="Freefly"
-CONFIG_CLOCK_MONOTONIC=y
-CONFIG_DEBUG_FULLOPT=y
-CONFIG_DEBUG_HARDFAULT_ALERT=y
-CONFIG_DEBUG_SYMBOLS=y
-CONFIG_DEFAULT_SMALL=y
-CONFIG_DEV_FIFO_SIZE=0
-CONFIG_DEV_PIPE_MAXSIZE=1024
-CONFIG_DEV_PIPE_SIZE=70
-CONFIG_FDCLONE_STDIO=y
-CONFIG_FS_BINFS=y
-CONFIG_FS_CROMFS=y
-CONFIG_FS_FAT=y
-CONFIG_FS_FATTIME=y
-CONFIG_FS_PROCFS=y
-CONFIG_FS_PROCFS_INCLUDE_PROGMEM=y
-CONFIG_FS_PROCFS_REGISTER=y
-CONFIG_FS_ROMFS=y
-CONFIG_GRAN=y
-CONFIG_GRAN_INTR=y
-CONFIG_HAVE_CXX=y
-CONFIG_HAVE_CXXINITIALIZE=y
-CONFIG_I2C=y
-CONFIG_I2C_RESET=y
-CONFIG_IDLETHREAD_STACKSIZE=750
-CONFIG_LIBC_FLOATINGPOINT=y
-CONFIG_LIBC_LONG_LONG=y
-CONFIG_LIBC_STRERROR=y
-CONFIG_MEMSET_64BIT=y
-CONFIG_MEMSET_OPTSPEED=y
-CONFIG_MM_REGIONS=2
-CONFIG_MTD=y
-CONFIG_MTD_BYTE_WRITE=y
-CONFIG_MTD_PARTITION=y
-CONFIG_MTD_RAMTRON=y
-CONFIG_NAME_MAX=40
-CONFIG_NFILE_DESCRIPTORS=12
-CONFIG_NSH_ARCHINIT=y
-CONFIG_NSH_ARCHROMFS=y
-CONFIG_NSH_ARGCAT=y
-CONFIG_NSH_BUILTIN_APPS=y
-CONFIG_NSH_CMDPARMS=y
-CONFIG_NSH_CROMFSETC=y
-CONFIG_NSH_DISABLE_IFCONFIG=y
-CONFIG_NSH_DISABLE_IFUPDOWN=y
-CONFIG_NSH_DISABLE_MB=y
-CONFIG_NSH_DISABLE_MH=y
-CONFIG_NSH_DISABLE_MW=y
-CONFIG_NSH_DISABLE_TELNETD=y
-CONFIG_NSH_LINELEN=128
-CONFIG_NSH_MAXARGUMENTS=15
-CONFIG_NSH_NESTDEPTH=8
-CONFIG_NSH_QUOTE=y
-CONFIG_NSH_ROMFSETC=y
-CONFIG_NSH_ROMFSSECTSIZE=128
-CONFIG_NSH_STRERROR=y
-CONFIG_NSH_VARS=y
-CONFIG_OTG_ID_GPIO_DISABLE=y
-CONFIG_PIPES=y
-CONFIG_PREALLOC_TIMERS=50
-CONFIG_PRIORITY_INHERITANCE=y
-CONFIG_PTHREAD_MUTEX_ROBUST=y
-CONFIG_PTHREAD_STACK_MIN=512
-CONFIG_RAMTRON_SETSPEED=y
-CONFIG_RAMTRON_WRITEWAIT=y
-CONFIG_RAM_SIZE=245760
-CONFIG_RAM_START=0x20010000
-CONFIG_RAW_BINARY=y
-CONFIG_RTC_DATETIME=y
-CONFIG_SCHED_ATEXIT=y
-CONFIG_SCHED_HPWORK=y
-CONFIG_SCHED_HPWORKPRIORITY=249
-CONFIG_SCHED_HPWORKSTACKSIZE=1280
-CONFIG_SCHED_INSTRUMENTATION=y
-CONFIG_SCHED_INSTRUMENTATION_EXTERNAL=y
-CONFIG_SCHED_LPWORK=y
-CONFIG_SCHED_LPWORKPRIORITY=50
-CONFIG_SCHED_LPWORKSTACKSIZE=1632
-CONFIG_SCHED_WAITPID=y
-CONFIG_SEM_NNESTPRIO=8
-CONFIG_SEM_PREALLOCHOLDERS=0
-CONFIG_SERIAL_TERMIOS=y
-CONFIG_SIG_DEFAULT=y
-CONFIG_SIG_SIGALRM_ACTION=y
-CONFIG_SIG_SIGUSR1_ACTION=y
-CONFIG_SIG_SIGUSR2_ACTION=y
-CONFIG_SIG_SIGWORK=4
-CONFIG_STACK_COLORATION=y
-CONFIG_START_DAY=30
-CONFIG_START_MONTH=11
-CONFIG_STDIO_BUFFER_SIZE=256
-CONFIG_STM32F7_CAN1=y
-CONFIG_STM32F7_DMA1=y
-CONFIG_STM32F7_DMA2=y
-CONFIG_STM32F7_DMACAPABLE=y
-CONFIG_STM32F7_I2C1=y
-CONFIG_STM32F7_I2C3=y
-CONFIG_STM32F7_I2C_DYNTIMEO=y
-CONFIG_STM32F7_I2C_DYNTIMEO_STARTSTOP=10
-CONFIG_STM32F7_OTGFS=y
-CONFIG_STM32F7_PROGMEM=y
-CONFIG_STM32F7_PWR=y
-CONFIG_STM32F7_RTC=y
-CONFIG_STM32F7_RTC_HSECLOCK=y
-CONFIG_STM32F7_RTC_MAGIC=0xfacefeee
-CONFIG_STM32F7_RTC_MAGIC_REG=1
-CONFIG_STM32F7_RTC_MAGIC_TIME_SET=0xfacefeef
-CONFIG_STM32F7_SERIALBRK_BSDCOMPAT=y
-CONFIG_STM32F7_SERIAL_DISABLE_REORDERING=y
-CONFIG_STM32F7_SPI3=y
-CONFIG_STM32F7_TIM8=y
-CONFIG_STM32F7_USART2=y
-CONFIG_STM32F7_USART3=y
-CONFIG_STM32F7_USART_BREAKS=y
-CONFIG_STM32F7_WWDG=y
-CONFIG_SYSTEM_NSH=y
-CONFIG_TASK_NAME_SIZE=24
-CONFIG_USART2_BAUD=57600
-CONFIG_USART2_RXBUFSIZE=600
-CONFIG_USART2_TXBUFSIZE=1100
-CONFIG_USART3_BAUD=57600
-CONFIG_USART3_RXBUFSIZE=600
-CONFIG_USART3_SERIAL_CONSOLE=y
-CONFIG_USART3_TXBUFSIZE=1100
-CONFIG_USBDEV=y
-CONFIG_USBDEV_BUSPOWERED=y
-CONFIG_USBDEV_MAXPOWER=500
-CONFIG_USEC_PER_TICK=1000
-CONFIG_USERMAIN_STACKSIZE=2624
-CONFIG_USER_ENTRYPOINT="nsh_main"
@@ -1,155 +0,0 @@
-/****************************************************************************
- * nuttx-config/scripts/canbootloader_script.ld
- *
- *   Copyright (C) 2015 Gregory Nutt. All rights reserved.
- *   Author: Gregory Nutt <gnutt@nuttx.org>
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- * 3. Neither the name NuttX nor the names of its contributors may be
- *    used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ****************************************************************************/
-
-/* The STM32F722ZE has 512 KiB of main FLASH memory.  This FLASH memory
- * can be accessed from either the AXIM interface at address 0x0800:0000 or
- * from the ITCM interface at address 0x0020:0000.
- *
- * Additional information, including the option bytes, is available at at
- * FLASH at address 0x1ff0:0000 (AXIM) or 0x0010:0000 (ITCM).
- *
- * In the STM32F32RE, two different boot spaces can be selected through
- * the BOOT pin and the boot base address programmed in the BOOT_ADD0 and
- * BOOT_ADD1 option bytes:
- *
- *   1) BOOT=0: Boot address defined by user option byte BOOT_ADD0[15:0].
- *      ST programmed value: Flash on ITCM at 0x0020:0000
- *   2) BOOT=1: Boot address defined by user option byte BOOT_ADD1[15:0].
- *      ST programmed value: System bootloader at 0x0010:0000
- *
- * NuttX does not modify these option bytes.  On the unmodified NUCLEO-144
- * board, the BOOT0 pin is at ground so by default, the STM32F32RE will
- * boot from address 0x0020:0000 in ITCM FLASH.
- *
- * The STM32F32RE also has 256 KiB of data SRAM (in addition to ITCM SRAM).
- * SRAM is split up into three blocks:
- *
- *   1)  64 KiB of DTCM SRM beginning at address 0x2000:0000
- *   2) 176 KiB of SRAM1 beginning at address 0x2001:0000
- *   3)  16 KiB of SRAM2 beginning at address 0x2003:c000
- *
- * When booting from FLASH, FLASH memory is aliased to address 0x0000:0000
- * where the code expects to begin execution by jumping to the entry point in
- * the 0x0800:0000 address range.
- */
-
-MEMORY
-{
-  itcm  (rwx) : ORIGIN = 0x00200000, LENGTH = 512K
-  flash (rx)  : ORIGIN = 0x08000000, LENGTH = 32K
-  dtcm  (rwx) : ORIGIN = 0x20000000, LENGTH = 64K
-  sram1 (rwx) : ORIGIN = 0x20010000, LENGTH = 176K
-  sram2 (rwx) : ORIGIN = 0x2003c000, LENGTH = 16K
-}
-
-OUTPUT_ARCH(arm)
-
-ENTRY(__start)		/* treat __start as the anchor for dead code stripping */
-EXTERN(_vectors)	/* force the vectors to be included in the output */
-
-/*
- * Ensure that abort() is present in the final object.  The exception handling
- * code pulled in by libgcc.a requires it (and that code cannot be easily avoided).
- */
-EXTERN(abort)
-SECTIONS
-{
-	.text : {
-		_stext = ABSOLUTE(.);
-		*(.vectors)
-		*(.text .text.*)
-		*(.fixup)
-		*(.gnu.warning)
-		*(.rodata .rodata.*)
-		*(.gnu.linkonce.t.*)
-		*(.got)
-		*(.gcc_except_table)
-		*(.gnu.linkonce.r.*)
-		_etext = ABSOLUTE(.);
-	} > flash
-
-	/*
-	 * Init functions (static constructors and the like)
-	 */
-	.init_section : {
-		_sinit = ABSOLUTE(.);
-		KEEP(*(.init_array .init_array.*))
-		_einit = ABSOLUTE(.);
-	} > flash
-
-
-	.ARM.extab : {
-		*(.ARM.extab*)
-	} > flash
-
-	__exidx_start = ABSOLUTE(.);
-	.ARM.exidx : {
-		*(.ARM.exidx*)
-	} > flash
-	__exidx_end = ABSOLUTE(.);
-
-	_eronly = ABSOLUTE(.);
-
-	.data : {
-		_sdata = ABSOLUTE(.);
-		*(.data .data.*)
-		*(.gnu.linkonce.d.*)
-		CONSTRUCTORS
-		_edata = ABSOLUTE(.);
-	} > sram1 AT > flash
-
-	.bss : {
-		_sbss = ABSOLUTE(.);
-		*(.bss .bss.*)
-		*(.gnu.linkonce.b.*)
-		*(COMMON)
-		. = ALIGN(4);
-		_ebss = ABSOLUTE(.);
-	} > sram1
-
-	/* Stabs debugging sections. */
-	.stab 0 : { *(.stab) }
-	.stabstr 0 : { *(.stabstr) }
-	.stab.excl 0 : { *(.stab.excl) }
-	.stab.exclstr 0 : { *(.stab.exclstr) }
-	.stab.index 0 : { *(.stab.index) }
-	.stab.indexstr 0 : { *(.stab.indexstr) }
-	.comment 0 : { *(.comment) }
-	.debug_abbrev 0 : { *(.debug_abbrev) }
-	.debug_info 0 : { *(.debug_info) }
-	.debug_line 0 : { *(.debug_line) }
-	.debug_pubnames 0 : { *(.debug_pubnames) }
-	.debug_aranges 0 : { *(.debug_aranges) }
-}
@@ -1,169 +0,0 @@
-/****************************************************************************
- * scripts/script.ld
- *
- *   Copyright (C) 2016 Gregory Nutt. All rights reserved.
- *   Author: Gregory Nutt <gnutt@nuttx.org>
- *
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- * 3. Neither the name NuttX nor the names of its contributors may be
- *    used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ****************************************************************************/
-
-/* The STM32F32RE has 512 KiB of main FLASH memory.  This FLASH memory
- * can be accessed from either the AXIM interface at address 0x0800:0000 or
- * from the ITCM interface at address 0x0020:0000.
- *
- * Additional information, including the option bytes, is available at at
- * FLASH at address 0x1ff0:0000 (AXIM) or 0x0010:0000 (ITCM).
- *
- * In the STM32F32RE, two different boot spaces can be selected through
- * the BOOT pin and the boot base address programmed in the BOOT_ADD0 and
- * BOOT_ADD1 option bytes:
- *
- *   1) BOOT=0: Boot address defined by user option byte BOOT_ADD0[15:0].
- *      ST programmed value: Flash on ITCM at 0x0020:0000
- *   2) BOOT=1: Boot address defined by user option byte BOOT_ADD1[15:0].
- *      ST programmed value: System bootloader at 0x0010:0000
- *
- * NuttX does not modify these option bytes.  On the unmodified NUCLEO-144
- * board, the BOOT0 pin is at ground so by default, the STM32F32RE will
- * boot from address 0x0020:0000 in ITCM FLASH.
- *
- * The STM32F32RE also has 256 KiB of data SRAM (in addition to ITCM SRAM).
- * SRAM is split up into three blocks:
- *
- *   1)  64 KiB of DTCM SRM beginning at address 0x2000:0000
- *   2) 176 KiB of SRAM1 beginning at address 0x2001:0000
- *   3)  16 KiB of SRAM2 beginning at address 0x2003:c000
- *
- * When booting from FLASH, FLASH memory is aliased to address 0x0000:0000
- * where the code expects to begin execution by jumping to the entry point in
- * the 0x0800:0000 address range.
- */
-
-MEMORY
-{
-  itcm  (rwx) : ORIGIN = 0x00200000, LENGTH = 512K
-  flash (rx)  : ORIGIN = 0x08010000, LENGTH = 512K-64K
-  dtcm  (rwx) : ORIGIN = 0x20000000, LENGTH = 64K
-  sram1 (rwx) : ORIGIN = 0x20010000, LENGTH = 176K
-  sram2 (rwx) : ORIGIN = 0x2003c000, LENGTH = 16K
-}
-
-OUTPUT_ARCH(arm)
-EXTERN(_vectors)
-ENTRY(_stext)
-
-/*
- * Ensure that abort() is present in the final object.  The exception handling
- * code pulled in by libgcc.a requires it (and that code cannot be easily avoided).
- */
-EXTERN(abort)
-EXTERN(_bootdelay_signature)
-
-SECTIONS
-{
-	.text : {
-		_stext = ABSOLUTE(.);
-		*(.vectors)
-		. = ALIGN(8);
-      /*
-       * This section positions the app_descriptor_t used
-       * by the make_can_boot_descriptor.py tool to set
-       * the application image's descriptor so that the
-       * uavcan bootloader has the ability to validate the
-       * image crc, size etc
-      */
-    KEEP(*(.app_descriptor))
-		*(.text .text.*)
-		*(.fixup)
-		*(.gnu.warning)
-		*(.rodata .rodata.*)
-		*(.gnu.linkonce.t.*)
-		*(.glue_7)
-		*(.glue_7t)
-		*(.got)
-		*(.gcc_except_table)
-		*(.gnu.linkonce.r.*)
-		_etext = ABSOLUTE(.);
-
-	} > flash
-
-	/*
-	 * Init functions (static constructors and the like)
-	 */
-	.init_section : {
-		_sinit = ABSOLUTE(.);
-		KEEP(*(.init_array .init_array.*))
-		_einit = ABSOLUTE(.);
-	} > flash
-
-
-	.ARM.extab : {
-		*(.ARM.extab*)
-	} > flash
-
-	__exidx_start = ABSOLUTE(.);
-	.ARM.exidx : {
-		*(.ARM.exidx*)
-	} > flash
-	__exidx_end = ABSOLUTE(.);
-
-	_eronly = ABSOLUTE(.);
-
-	.data : {
-		_sdata = ABSOLUTE(.);
-		*(.data .data.*)
-		*(.gnu.linkonce.d.*)
-		CONSTRUCTORS
-		_edata = ABSOLUTE(.);
-	} > sram1 AT > flash
-
-	.bss : {
-		_sbss = ABSOLUTE(.);
-		*(.bss .bss.*)
-		*(.gnu.linkonce.b.*)
-		*(COMMON)
-		. = ALIGN(4);
-		_ebss = ABSOLUTE(.);
-	} > sram1
-
-	/* Stabs debugging sections. */
-	.stab 0 : { *(.stab) }
-	.stabstr 0 : { *(.stabstr) }
-	.stab.excl 0 : { *(.stab.excl) }
-	.stab.exclstr 0 : { *(.stab.exclstr) }
-	.stab.index 0 : { *(.stab.index) }
-	.stab.indexstr 0 : { *(.stab.indexstr) }
-	.comment 0 : { *(.comment) }
-	.debug_abbrev 0 : { *(.debug_abbrev) }
-	.debug_info 0 : { *(.debug_info) }
-	.debug_line 0 : { *(.debug_line) }
-	.debug_pubnames 0 : { *(.debug_pubnames) }
-	.debug_aranges 0 : { *(.debug_aranges) }
-}
@@ -1,67 +0,0 @@
-############################################################################
-#
-#   Copyright (c) 2021 PX4 Development Team. All rights reserved.
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions
-# are met:
-#
-# 1. Redistributions of source code must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-# 2. Redistributions in binary form must reproduce the above copyright
-#    notice, this list of conditions and the following disclaimer in
-#    the documentation and/or other materials provided with the
-#    distribution.
-# 3. Neither the name PX4 nor the names of its contributors may be
-#    used to endorse or promote products derived from this software
-#    without specific prior written permission.
-#
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
-# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
-# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
-# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
-# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
-# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
-# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
-# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-# POSSIBILITY OF SUCH DAMAGE.
-#
-############################################################################
-
-if("${PX4_BOARD_LABEL}" STREQUAL  "canbootloader")
-
-	add_library(drivers_board
-		boot_config.h
-		boot.c
-		i2c.cpp
-		led.cpp
-	)
-	target_link_libraries(drivers_board
-		PRIVATE
-			nuttx_arch
-			nuttx_drivers
-			canbootloader
-	)
-	target_include_directories(drivers_board PRIVATE ${PX4_SOURCE_DIR}/platforms/nuttx/src/canbootloader)
-
-else()
-	add_library(drivers_board
-		can.c
-		i2c.cpp
-		init.c
-		spi.cpp
-		usb.c
-	)
-
-	target_link_libraries(drivers_board
-		PRIVATE
-			arch_spi
-			nuttx_arch
-			nuttx_drivers
-			px4_layer
-			arch_io_pins
-	)
-endif()
@@ -1,192 +0,0 @@
-/****************************************************************************
- *
- *   Copyright (c) 2021 PX4 Development Team. All rights reserved.
- *       Author: Ben Dyer <ben_dyer@mac.com>
- *               Pavel Kirienko <pavel.kirienko@zubax.com>
- *               David Sidrane <david_s5@nscdg.com>
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- * 3. Neither the name PX4 nor the names of its contributors may be
- *    used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ****************************************************************************/
-
-/****************************************************************************
- * Included Files
- ****************************************************************************/
-
-#include <px4_config.h>
-#include <stdint.h>
-#include "boot_config.h"
-#include "led.h"
-#include "board.h"
-
-#include <debug.h>
-#include <string.h>
-#include <arch/board/board.h>
-
-#include <nuttx/board.h>
-
-/************************************************************************************
- * Name: stm32_boardinitialize
- *
- * Description:
- *   All STM32 architectures must provide the following entry point.  This entry point
- *   is called early in the initialization -- after all memory has been configured
- *   and mapped but before any devices have been initialized.
- *
- ************************************************************************************/
-
-__EXPORT void stm32_boardinitialize(void)
-{
-	putreg32(getreg32(STM32_RCC_APB1ENR) | RCC_APB1ENR_CAN1EN, STM32_RCC_APB1ENR);
-	stm32_configgpio(GPIO_CAN1_RX);
-	stm32_configgpio(GPIO_CAN1_TX);
-	putreg32(getreg32(STM32_RCC_APB1RSTR) | RCC_APB1RSTR_CAN1RST, STM32_RCC_APB1RSTR);
-	putreg32(getreg32(STM32_RCC_APB1RSTR) & ~RCC_APB1RSTR_CAN1RST, STM32_RCC_APB1RSTR);
-
-	stm32_configgpio(GPIO_LED_SAFETY);
-
-#if defined(OPT_WAIT_FOR_GETNODEINFO_JUMPER_GPIO)
-	stm32_configgpio(GPIO_GETNODEINFO_JUMPER);
-#endif
-
-}
-
-/************************************************************************************
- * Name: board_deinitialize
- *
- * Description:
- *   This function is called by the bootloader code prior to booting
- *   the application. Is should place the HW into an benign initialized state.
- *
- ************************************************************************************/
-
-void board_deinitialize(void)
-{
-	putreg32(getreg32(STM32_RCC_APB1RSTR) | RCC_APB1RSTR_CAN1RST, STM32_RCC_APB1RSTR);
-}
-
-/****************************************************************************
- * Name: board_get_product_name
- *
- * Description:
- *   Called to retrieve the product name. The returned value is a assumed
- *   to be written to a pascal style string that will be length prefixed
- *   and not null terminated
- *
- * Input Parameters:
- *    product_name - A pointer to a buffer to write the name.
- *    maxlen       - The maximum number of charter that can be written
- *
- * Returned Value:
- *   The length of characters written to the buffer.
- *
- ****************************************************************************/
-
-uint8_t board_get_product_name(uint8_t *product_name, size_t maxlen)
-{
-	DEBUGASSERT(maxlen > UAVCAN_STRLEN(HW_UAVCAN_NAME));
-	memcpy(product_name, HW_UAVCAN_NAME, UAVCAN_STRLEN(HW_UAVCAN_NAME));
-	return UAVCAN_STRLEN(HW_UAVCAN_NAME);
-}
-
-/****************************************************************************
- * Name: board_get_hardware_version
- *
- * Description:
- *   Called to retrieve the hardware version information. The function
- *   will first initialize the the callers struct to all zeros.
- *
- * Input Parameters:
- *    hw_version - A pointer to a uavcan_hardwareversion_t.
- *
- * Returned Value:
- *   Length of the unique_id
- *
- ****************************************************************************/
-
-size_t board_get_hardware_version(uavcan_HardwareVersion_t *hw_version)
-{
-	memset(hw_version, 0, sizeof(uavcan_HardwareVersion_t));
-
-	hw_version->major = HW_VERSION_MAJOR;
-	hw_version->minor = HW_VERSION_MINOR;
-
-	return board_get_mfguid(*(mfguid_t *) hw_version->unique_id);
-}
-
-/****************************************************************************
- * Name: board_indicate
- *
- * Description:
- *   Provides User feedback to indicate the state of the bootloader
- *   on board specific  hardware.
- *
- * Input Parameters:
- *    indication - A member of the uiindication_t
- *
- * Returned Value:
- *   None
- *
- ****************************************************************************/
-#define led(n, code, r , g , b, h) {.red = (r),.green = (g), .blue = (b),.hz = (h)}
-
-typedef begin_packed_struct struct led_t {
-	uint8_t red;
-	uint8_t green;
-	uint8_t blue;
-	uint8_t hz;
-} end_packed_struct led_t;
-
-static const  led_t i2l[] = {
-
-	led(0, off,                             0,    0,    0,     0),
-	led(1, reset,                          10,   63,   31,   255),
-	led(2, autobaud_start,                  0,   63,    0,     1),
-	led(3, autobaud_end,                    0,   63,    0,     2),
-	led(4, allocation_start,                0,    0,   31,     2),
-	led(5, allocation_end,                  0,   63,   31,     3),
-	led(6, fw_update_start,                15,   63,   31,     3),
-	led(7, fw_update_erase_fail,           15,   63,   15,     3),
-	led(8, fw_update_invalid_response,     31,    0,    0,     1),
-	led(9, fw_update_timeout,              31,    0,    0,     2),
-	led(a, fw_update_invalid_crc,          31,    0,    0,     4),
-	led(b, jump_to_app,                     0,   63,    0,    10),
-
-};
-
-void board_indicate(uiindication_t indication)
-{
-	rgb_led(i2l[indication].red << 3,
-		i2l[indication].green << 2,
-		i2l[indication].blue << 3,
-		i2l[indication].hz);
-}
-
-__EXPORT void px4_log_modulename(int level, const char *moduleName, const char *fmt, ...)
-{
-}
@@ -1,134 +0,0 @@
-/****************************************************************************
- *
- *   Copyright (c) 2021 PX4 Development Team. All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- * 3. Neither the name PX4 nor the names of its contributors may be
- *    used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ****************************************************************************/
-
-/*
- * @file boot_config.h
- *
- * bootloader definitions that configures the behavior and options
- * of the Boot loader
- * This file is relies on the parent folder's boot_config.h file and defines
- * different usages of the hardware for bootloading
- */
-
-#pragma once
-
-/************************************************************************************
- * Included Files
- ************************************************************************************/
-
-/* Bring in the board_config.h definitions
- * todo:make this be pulled in from a targed's build
- * files in nuttx*/
-
-#include "board_config.h"
-#include "uavcan.h"
-#include <nuttx/compiler.h>
-
-#include <stdint.h>
-
-#include <hardware/stm32_flash.h>
-
-/****************************************************************************
- * Pre-processor Definitions
- ****************************************************************************/
-
-#define OPT_PREFERRED_NODE_ID ANY_NODE_ID
-
-//todo:wrap OPT_x in in ifdefs for command line definitions
-#define OPT_TBOOT_MS                    5000
-#define OPT_NODE_STATUS_RATE_MS         800
-#define OPT_NODE_INFO_RATE_MS           50
-#define OPT_BL_NUMBER_TIMERS            7
-
-/*
- *  This Option set is set to 1 ensure a provider of firmware has an
- *  opportunity update the node's firmware.
- *  This Option is the default policy and can be overridden by
- *  a jumper
- *  When this Policy is set, the node will ignore tboot and
- *  wait indefinitely for a GetNodeInfo request before booting.
- *
- *  OPT_WAIT_FOR_GETNODEINFO_JUMPER_GPIO_INVERT is used to allow
- *  the polarity of the jumper to be True Active
- *
- *  wait  OPT_WAIT_FOR_GETNODEINFO  OPT_WAIT_FOR_GETNODEINFO_JUMPER_GPIO
- *                                                 Jumper
- *   yes           1                       0         x
- *   yes           1                       1       Active
- *   no            1                       1       Not Active
- *   no            0                       0         X
- *   yes           0                       1       Active
- *   no            0                       1       Not Active
- *
- */
-#define OPT_WAIT_FOR_GETNODEINFO                    0
-#define OPT_WAIT_FOR_GETNODEINFO_JUMPER_GPIO        1
-#define OPT_WAIT_FOR_GETNODEINFO_JUMPER_GPIO_INVERT 0
-
-#define OPT_ENABLE_WD           1
-
-#define OPT_RESTART_TIMEOUT_MS          20000
-
-/* Reserved for the Booloader */
-#define OPT_BOOTLOADER_SIZE_IN_K        (1024*64)
-
-/* Reserved for the application out of the total
- * system flash minus the BOOTLOADER_SIZE_IN_K
- */
-#define OPT_APPLICATION_RESERVER_IN_K    0
-
-#define OPT_APPLICATION_IMAGE_OFFSET    OPT_BOOTLOADER_SIZE_IN_K
-#define OPT_APPLICATION_IMAGE_LENGTH    (FLASH_SIZE-(OPT_BOOTLOADER_SIZE_IN_K+OPT_APPLICATION_RESERVER_IN_K))
-
-
-#define FLASH_BASE              STM32_FLASH_BASE
-#define FLASH_SIZE              STM32_FLASH_SIZE
-
-#define APPLICATION_LOAD_ADDRESS (FLASH_BASE + OPT_APPLICATION_IMAGE_OFFSET)
-#define APPLICATION_SIZE (FLASH_SIZE-OPT_APPLICATION_IMAGE_OFFSET)
-#define APPLICATION_LAST_8BIT_ADDRRESS  ((uint8_t *)((APPLICATION_LOAD_ADDRESS+APPLICATION_SIZE)-sizeof(uint8_t)))
-#define APPLICATION_LAST_32BIT_ADDRRESS ((uint32_t *)((APPLICATION_LOAD_ADDRESS+APPLICATION_SIZE)-sizeof(uint32_t)))
-#define APPLICATION_LAST_64BIT_ADDRRESS ((uint64_t *)((APPLICATION_LOAD_ADDRESS+APPLICATION_SIZE)-sizeof(uint64_t)))
-
-/* If this board uses big flash that have large sectors */
-
-#define OPT_USE_YIELD
-
-/* I2C LED needs 8 bytes */
-
-#define OPT_SIMPLE_MALLOC_HEAP_SIZE               8
-
-/* Bootloader Option*****************************************************************
- *
- */
-#define GPIO_GETNODEINFO_JUMPER GPIO_BTN_SAFETY
@@ -1,127 +0,0 @@
-/****************************************************************************
- *
- *   Copyright (C) 2021 PX4 Development Team. All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- * 3. Neither the name PX4 nor the names of its contributors may be
- *    used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ****************************************************************************/
-
-/**
- * @file can.c
- *
- * Board-specific CAN functions.
- */
-
-#ifdef CONFIG_CAN
-
-#include "board_config.h"
-
-#include <errno.h>
-#include <debug.h>
-
-#include <nuttx/can/can.h>
-#include <arch/board/board.h>
-
-#include "chip.h"
-#include "arm_arch.h"
-
-#include "chip.h"
-#include "stm32_can.h"
-#include "board_config.h"
-
-
-/************************************************************************************
- * Pre-processor Definitions
- ************************************************************************************/
-/* Configuration ********************************************************************/
-
-#if defined(CONFIG_STM32_CAN1) && defined(CONFIG_STM32_CAN2)
-#  warning "Both CAN1 and CAN2 are enabled.  Assuming only CAN1."
-#  undef CONFIG_STM32_CAN2
-#endif
-
-#ifdef CONFIG_STM32_CAN1
-#  define CAN_PORT 1
-#else
-#  define CAN_PORT 2
-#endif
-
-/************************************************************************************
- * Private Functions
- ************************************************************************************/
-
-/************************************************************************************
- * Public Functions
- ************************************************************************************/
-int can_devinit(void);
-
-/************************************************************************************
- * Name: can_devinit
- *
- * Description:
- *   All STM32 architectures must provide the following interface to work with
- *   examples/can.
- *
- ************************************************************************************/
-
-int can_devinit(void)
-{
-	static bool initialized = false;
-	struct can_dev_s *can;
-	int ret;
-
-	/* Check if we have already initialized */
-
-	if (!initialized) {
-		/* Call stm32_caninitialize() to get an instance of the CAN interface */
-
-		can = stm32_caninitialize(CAN_PORT);
-
-		if (can == NULL) {
-			canerr("ERROR:  Failed to get CAN interface\n");
-			return -ENODEV;
-		}
-
-		/* Register the CAN driver at "/dev/can0" */
-
-		ret = can_register("/dev/can0", can);
-
-		if (ret < 0) {
-			canerr("ERROR: can_register failed: %d\n", ret);
-			return ret;
-		}
-
-		/* Now we are initialized */
-
-		initialized = true;
-	}
-
-	return OK;
-}
-
-#endif
@@ -1,39 +0,0 @@
-/****************************************************************************
- *
- *   Copyright (C) 2021 PX4 Development Team. All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- * 3. Neither the name PX4 nor the names of its contributors may be
- *    used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ****************************************************************************/
-
-#include <px4_arch/i2c_hw_description.h>
-
-constexpr px4_i2c_bus_t px4_i2c_buses[I2C_BUS_MAX_BUS_ITEMS] = {
-	initI2CBusInternal(1),
-	initI2CBusInternal(3),
-};
@@ -1,148 +0,0 @@
-/****************************************************************************
- *
- *   Copyright (c) 2021 PX4 Development Team. All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- * 3. Neither the name PX4 nor the names of its contributors may be
- *    used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ****************************************************************************/
-
-/**
- * @file init.c
- *
- * board specific early startup code.  This file implements the
- * board_app_initialize() function that is called early by nsh during startup.
- *
- * Code here is run before the rcS script is invoked; it should start required
- * subsystems and perform board-specific initialization.
- */
-
-#include <px4_platform_common/px4_config.h>
-#include <px4_platform_common/tasks.h>
-
-#include <stdbool.h>
-#include <stdio.h>
-#include <string.h>
-#include <debug.h>
-#include <errno.h>
-
-#include <nuttx/config.h>
-#include <nuttx/board.h>
-#include <chip.h>
-#include <stm32_uart.h>
-#include <arch/board/board.h>
-#include "arm_internal.h"
-
-#include <px4_arch/io_timer.h>
-#include <drivers/drv_hrt.h>
-#include <drivers/drv_board_led.h>
-#include <drivers/drv_watchdog.h>
-
-#include <systemlib/px4_macros.h>
-#include <px4_platform_common/init.h>
-#include <px4_platform/gpio.h>
-#include <px4_platform/board_dma_alloc.h>
-
-# if defined(FLASH_BASED_PARAMS)
-#  include <parameters/flashparams/flashfs.h>
-#endif
-
-/************************************************************************************
- * Name: stm32_boardinitialize
- *
- * Description:
- *   All STM32 architectures must provide the following entry point.  This entry point
- *   is called early in the initialization -- after all memory has been configured
- *   and mapped but before any devices have been initialized.
- *
- ************************************************************************************/
-
-__EXPORT void stm32_boardinitialize(void)
-{
-	//watchdog_init();
-
-	// Configure CAN interface
-	stm32_configgpio(GPIO_CAN1_RX);
-	stm32_configgpio(GPIO_CAN1_TX);
-
-	stm32_configgpio(GPIO_LED_SAFETY);
-	stm32_configgpio(GPIO_BTN_SAFETY);
-
-	// Configure SPI all interfaces GPIO & enable power.
-	stm32_spiinitialize();
-}
-
-/****************************************************************************
- * Name: board_app_initialize
- *
- * Description:
- *   Perform application specific initialization.  This function is never
- *   called directly from application code, but only indirectly via the
- *   (non-standard) boardctl() interface using the command BOARDIOC_INIT.
- *
- * Input Parameters:
- *   arg - The boardctl() argument is passed to the board_app_initialize()
- *         implementation without modification.  The argument has no
- *         meaning to NuttX; the meaning of the argument is a contract
- *         between the board-specific initalization logic and the the
- *         matching application logic.  The value cold be such things as a
- *         mode enumeration value, a set of DIP switch switch settings, a
- *         pointer to configuration data read from a file or serial FLASH,
- *         or whatever you would like to do with it.  Every implementation
- *         should accept zero/NULL as a default configuration.
- *
- * Returned Value:
- *   Zero (OK) is returned on success; a negated errno value is returned on
- *   any failure to indicate the nature of the failure.
- *
- ****************************************************************************/
-
-__EXPORT int board_app_initialize(uintptr_t arg)
-{
-	px4_platform_init();
-
-#if defined(FLASH_BASED_PARAMS)
-	static sector_descriptor_t params_sector_map[] = {
-		{1, 32 * 1024, 0x08008000},
-		{2, 32 * 1024, 0x08010000},
-		{0, 0, 0},
-	};
-
-	/* Initialize the flashfs layer to use heap allocated memory */
-	int result = parameter_flashfs_init(params_sector_map, NULL, 0);
-
-	if (result != OK) {
-		syslog(LOG_ERR, "[boot] FAILED to init params in FLASH %d\n", result);
-		return -ENODEV;
-	}
-
-#endif // FLASH_BASED_PARAMS
-
-	//px4_platform_configure();
-
-	return OK;
-}
@@ -1,239 +0,0 @@
-/****************************************************************************
- *
- *   Copyright (C) 2015 PX4 Development Team. All rights reserved.
- *   Author: David Sidrane<david_s5@nscdg.com>
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- * 3. Neither the name PX4 nor the names of its contributors may be
- *    used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ****************************************************************************/
-#include <px4_config.h>
-
-#include <stdint.h>
-#include <stdbool.h>
-
-#include <arch/board/board.h>
-#include "led.h"
-
-#include <string.h>
-
-#include <hardware/stm32_tim.h>
-#include <drivers/device/i2c.h>
-#include <lib/led/led.h>
-
-__BEGIN_DECLS
-#include "cxx_init.h"
-void board_autoled_on(int led);
-void board_autoled_off(int led);
-__END_DECLS
-
-using namespace time_literals;
-#define MODULE_NAME "LED"
-
-#define ADDR                0x39  /**< I2C adress of NCP5623C */
-
-#define NCP5623_LED_CURRENT 0x20  /**< Current register */
-#define NCP5623_LED_PWM0    0x40  /**< pwm0 register */
-#define NCP5623_LED_PWM1    0x60  /**< pwm1 register */
-#define NCP5623_LED_PWM2    0x80  /**< pwm2 register */
-
-#define NCP5623_LED_BRIGHT  0x1f  /**< full brightness */
-#define NCP5623_LED_OFF     0x00  /**< off */
-
-
-class RGBLED_NPC5623C : public device::I2C
-{
-public:
-	RGBLED_NPC5623C(const int bus, int bus_frequency, const int address);
-	virtual ~RGBLED_NPC5623C() = default;
-
-	int   init() override;
-	int   probe() override;
-
-	int   send_led_rgb(uint8_t red, uint8_t green, uint8_t blue);
-
-
-private:
-	float     _brightness{1.0f};
-	float     _max_brightness{1.0f};
-
-	int     write(uint8_t reg, uint8_t data);
-};
-
-RGBLED_NPC5623C::RGBLED_NPC5623C(const int bus, int bus_frequency, const int address) :
-	I2C(DRV_LED_DEVTYPE_RGBLED_NCP5623C, MODULE_NAME, bus, address, bus_frequency)
-{
-}
-
-int
-RGBLED_NPC5623C::write(uint8_t reg, uint8_t data)
-{
-	uint8_t msg[1] = { 0x00 };
-	msg[0] = ((reg & 0xe0) | (data & 0x1f));
-
-	int ret = transfer(&msg[0], 1, nullptr, 0);
-
-	return ret;
-}
-
-int
-RGBLED_NPC5623C::init()
-{
-	int ret = I2C::init();
-
-	if (ret != OK) {
-		return ret;
-	}
-
-	return OK;
-}
-
-int
-RGBLED_NPC5623C::probe()
-{
-	_retries = 4;
-
-	return write(NCP5623_LED_CURRENT, 0x00);
-}
-
-
-/**
- * Send RGB PWM settings to LED driver according to current color and brightness
- */
-int
-RGBLED_NPC5623C::send_led_rgb(uint8_t red, uint8_t green, uint8_t blue)
-{
-
-	uint8_t msg[7] = {0x20, 0x70, 0x40, 0x70, 0x60, 0x70, 0x80};
-	uint8_t brightness = 0x1f * _max_brightness;
-
-	msg[0] = NCP5623_LED_CURRENT | (brightness & 0x1f);
-	msg[2] = NCP5623_LED_PWM0 | (uint8_t(red * _brightness) & 0x1f);
-	msg[4] = NCP5623_LED_PWM1 | (uint8_t(green * _brightness) & 0x1f);
-	msg[6] = NCP5623_LED_PWM2 | (uint8_t(blue * _brightness) & 0x1f);
-
-	return transfer(&msg[0], 7, nullptr, 0);
-}
-
-static RGBLED_NPC5623C instance(1, 100000, ADDR);
-
-#define TMR_BASE        STM32_TIM1_BASE
-#define TMR_FREQUENCY   STM32_APB2_TIM1_CLKIN
-#define TMR_REG(o)      (TMR_BASE+(o))
-
-static  uint8_t _rgb[] = {0, 0, 0};
-
-static int timerInterrupt(int irq, void *context, void *arg)
-{
-	putreg16(~getreg16(TMR_REG(STM32_GTIM_SR_OFFSET)), TMR_REG(STM32_GTIM_SR_OFFSET));
-
-	static int d2 = 1;
-	(d2++ & 1) ? instance.send_led_rgb(0, 0, 0) : instance.send_led_rgb(_rgb[0], _rgb[1], _rgb[2]);
-
-	return 0;
-}
-
-
-void rgb_led(int r, int g, int b, int freqs)
-{
-	long fosc = TMR_FREQUENCY;
-	long prescale = 1536;
-	long p1s = fosc / prescale;
-	long p0p5s  = p1s / 2;
-	uint16_t val;
-	static bool once = false;
-
-	if (!once) {
-		cxx_initialize();
-
-		if (instance.init() != PX4_OK) {
-			return;
-		}
-
-		modifyreg32(STM32_RCC_APB2ENR, 0, RCC_APB2ENR_TIM1EN);
-
-		/* Reload */
-		val = getreg16(TMR_REG(STM32_BTIM_EGR_OFFSET));
-		val |= ATIM_EGR_UG;
-		putreg16(val, TMR_REG(STM32_BTIM_EGR_OFFSET));
-
-		/* Set Prescaler STM32_TIM_SETCLOCK */
-		putreg16(prescale, TMR_REG(STM32_BTIM_PSC_OFFSET));
-
-		/* Enable STM32_TIM_SETMODE*/
-		putreg16(ATIM_CR1_CEN | ATIM_CR1_ARPE, TMR_REG(STM32_BTIM_CR1_OFFSET));
-
-		putreg32(p0p5s + 1, TMR_REG(STM32_BTIM_ARR_OFFSET));
-
-
-		irq_attach(STM32_IRQ_TIM1CC, timerInterrupt, NULL);
-		up_enable_irq(STM32_IRQ_TIM1CC);
-		putreg16(GTIM_DIER_CC1IE, TMR_REG(STM32_GTIM_DIER_OFFSET));
-		once = true;
-	}
-
-	long p  = freqs == 0 ? p1s + 1 : p0p5s / freqs;
-	putreg32(p + 1, TMR_REG(STM32_BTIM_ARR_OFFSET));
-	putreg32(p, TMR_REG(STM32_GTIM_CCR1_OFFSET));
-	_rgb[0] = r;
-	_rgb[1] = g;
-	_rgb[2] = b;
-
-	val = getreg16(TMR_REG(STM32_BTIM_CR1_OFFSET));
-
-	if (freqs == 0) {
-		val &= ~ATIM_CR1_CEN;
-
-	} else {
-		val |= ATIM_CR1_CEN;
-	}
-
-	putreg16(val, TMR_REG(STM32_BTIM_CR1_OFFSET));
-}
-
-/****************************************************************************
- * Name: board_autoled_on
- ****************************************************************************/
-
-__EXPORT void board_autoled_on(int led)
-{
-	if (led == LED_ASSERTION || led == LED_PANIC) {
-		stm32_gpiowrite(GPIO_LED_SAFETY, true);
-	}
-}
-
-/****************************************************************************
- * Name: board_autoled_off
- ****************************************************************************/
-
-__EXPORT void board_autoled_off(int led)
-{
-	if (led == LED_ASSERTION || led == LED_PANIC) {
-		stm32_gpiowrite(GPIO_LED_SAFETY, false);
-	}
-
-}
@@ -1,37 +0,0 @@
-/****************************************************************************
- *
- *   Copyright (C) 2015 PX4 Development Team. All rights reserved.
- *   Author: David Sidrane<david_s5@nscdg.com>
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- * 3. Neither the name PX4 nor the names of its contributors may be
- *    used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ****************************************************************************/
-
-__BEGIN_DECLS
-void rgb_led(int r, int g, int b, int freqs);
-__END_DECLS
--- a/Show More
+++ b/Show More