px4_fmuv5:Establish reset state of GPIO_VDD_3V3_SENSORS_EN

2026-05-23 23:57:35 +08:00 · 2022-03-22 10:50:29 -07:00
1458 changed files with 24586 additions and 112959 deletions
@@ -28,7 +28,7 @@ pipeline {
          ]

          def base_builds = [
-            target: ["px4_sitl_default"],
+            target: ["px4_sitl_rtps"],
            image: docker_images.base,
            archive: false
          ]
@@ -52,29 +52,25 @@ pipeline {
                     "cuav_x7pro_default",
                     "cubepilot_cubeorange_default",
                     "cubepilot_cubeyellow_default",
-                     "diatone_mamba-f405-mk2_default",
                     "freefly_can-rtk-gps_canbootloader",
                     "freefly_can-rtk-gps_default",
                     "holybro_can-gps-v1_canbootloader",
                     "holybro_can-gps-v1_default",
                     "holybro_durandal-v1_default",
                     "holybro_kakutef7_default",
-                     "holybro_kakuteh7_default",
                     "holybro_pix32v5_default",
+                     "matek_h743-slim",
                     "matek_gnss-m9n-f4_canbootloader",
                     "matek_gnss-m9n-f4_default",
-                     "matek_h743-mini_default",
-                     "matek_h743-slim_default",
-                     "matek_h743_default",
                     "modalai_fc-v1_default",
                     "modalai_fc-v1_rtps",
                     "modalai_fc-v2_default",
                     "mro_ctrl-zero-f7_default",
                     "mro_ctrl-zero-f7-oem_default",
-                     "mro_ctrl-zero-h7-oem_default",
-                     "mro_ctrl-zero-h7-oem_rtps",
                     "mro_ctrl-zero-h7_default",
                     "mro_ctrl-zero-h7_rtps",
+                     "mro_ctrl-zero-h7-oem_default",
+                     "mro_ctrl-zero-h7-oem_rtps",
                     "mro_pixracerpro_default",
                     "mro_pixracerpro_rtps",
                     "mro_x21-777_default",
@@ -89,28 +85,24 @@ pipeline {
                     "nxp_ucans32k146_canbootloader",
                     "nxp_ucans32k146_default",
                     "omnibus_f4sd_default",
+                     "raspberrypi_pico_default",
                     "px4_fmu-v2_default",
                     "px4_fmu-v2_fixedwing",
-                     "px4_fmu-v2_lto",
                     "px4_fmu-v2_multicopter",
                     "px4_fmu-v2_rover",
                     "px4_fmu-v3_default",
                     "px4_fmu-v4_default",
                     "px4_fmu-v4pro_default",
-                     "px4_fmu-v5_cyphal",
                     "px4_fmu-v5_debug",
                     "px4_fmu-v5_default",
-                     "px4_fmu-v5_lto",
                     "px4_fmu-v5_rtps",
                     "px4_fmu-v5_stackcheck",
                     "px4_fmu-v5_uavcanv0periph",
+                     "px4_fmu-v5_uavcanv1",
                     "px4_fmu-v5x_default",
-                     "px4_fmu-v6c_default",
                     "px4_fmu-v6u_default",
                     "px4_fmu-v6x_default",
                     "px4_io-v2_default",
-                     "raspberrypi_pico_default",
-                     "sky-drones_smartap-airlink_default",
                     "spracing_h7extreme_default",
                     "uvify_core_default"
            ],
@@ -705,21 +705,18 @@ void quickCalibrate() {

  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "gyro_calibration status || true"'

-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "commander calibrate accel quick; sleep 1"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "commander calibrate accel quick"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param show CAL_ACC*"'

-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "commander calibrate gyro; sleep 2"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "commander calibrate gyro"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param show CAL_GYRO*"'

-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "commander calibrate level; sleep 2"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "commander calibrate level"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param show SENS*"'

-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "commander calibrate mag quick; sleep 1"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "commander calibrate mag quick"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param show CAL_MAG*"'

-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "commander calibrate baro; sleep 5"'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param show CAL_BARO*"'
-
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param show CAL_*"' // parameters after
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "sensors status"'
 }
@@ -794,7 +791,7 @@ void resetParameters() {
 void runTests() {

  // test loading a range of airframes
-  sh './Tools/HIL/test_airframes.sh `find /dev/serial -name *usb-*` 2100 3000 4001 6001 8001 10016'
+  sh './Tools/HIL/test_airframes.sh `find /dev/serial -name *usb-*` 1000 1001 2100 3000 4001 6001 8001 10016'

  resetParameters()

@@ -809,9 +806,6 @@ void runTests() {
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "top once"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "work_queue status"'

-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "ostest"'
-  sh './Tools/HIL/reboot.py --device `find /dev/serial -name *usb-*`' // reboot after ostest
-
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "commander_tests" || true'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "controllib_test"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "lightware_laser_test"'
@@ -867,15 +861,12 @@ void printTopics() {
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener cpuload" || true'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener distance_sensor" || true'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener ekf2_timestamps" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_gps_status" || true'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener esc_status" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_aid_src_fake_pos" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_aid_src_gnss_pos" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_aid_src_gnss_vel" || true'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_attitude" || true'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_baro_bias" || true'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_event_flags" || true'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_global_position" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_gps_status" || true'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_innovation_test_ratios" || true'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_innovation_variances" || true'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_innovations" || true'
@@ -1,17 +1,11 @@
 ---
 Checks:          '*,
-                  -*-avoid-c-arrays,
-                  -*-uppercase-literal-suffix,
-                  -*-magic-numbers,
-                  -altera-id-dependent-backward-branch,
-                  -altera-unroll-loops,
                  -android*,
                  -bugprone-integer-division,
                  -cert-dcl50-cpp,
                  -cert-env33-c,
                  -cert-err34-c,
                  -cert-err58-cpp,
-                  -cert-flp30-c,
                  -cert-msc30-c,
                  -cert-msc50-cpp,
                  -clang-analyzer-core.CallAndMessage,
@@ -24,7 +18,6 @@ Checks:          '*,
                  -clang-analyzer-deadcode.DeadStores,
                  -clang-analyzer-optin.cplusplus.VirtualCall,
                  -clang-analyzer-optin.performance.Padding,
-                  -clang-analyzer-security.FloatLoopCounter,
                  -clang-analyzer-security.insecureAPI.strcpy,
                  -clang-analyzer-unix.API,
                  -clang-analyzer-unix.cstring.BadSizeArg,
@@ -44,7 +37,8 @@ Checks:          '*,
                  -cppcoreguidelines-pro-type-union-access,
                  -cppcoreguidelines-pro-type-vararg,
                  -cppcoreguidelines-special-member-functions,
-                  -fuchsia-*,
+                  -fuchsia-default-arguments,
+                  -fuchsia-overloaded-operator,
                  -google-build-using-namespace,
                  -google-explicit-constructor,
                  -google-global-names-in-headers,
@@ -68,7 +62,6 @@ Checks:          '*,
                  -hicpp-use-equals-delete,
                  -hicpp-use-override,
                  -hicpp-vararg,
-                  -llvmlibc-*,
                  -llvm-header-guard,
                  -llvm-include-order,
                  -llvm-namespace-comment,
@@ -91,7 +84,6 @@ Checks:          '*,
                  -modernize-use-override,
                  -modernize-use-trailing-return-type,
                  -modernize-use-using,
-                  -modernize-use-trailing-return-type,
                  -performance-inefficient-string-concatenation,
                  -readability-avoid-const-params-in-decls,
                  -readability-container-size-empty,
@@ -1,34 +1,32 @@
 ---
-name: 🐛 Bug report
+name: Bug report
 about: Create a report to help us improve
-labels: bug-report

 ---

-## Describe the bug
+**Describe the bug**
 A clear and concise description of the bug.

-## To Reproduce
+**To Reproduce**
 Steps to reproduce the behavior:
 1. Drone switched on '...'
 2. Uploaded mission '....' (attach QGC mission file)
 3. Took off '....'
 4. See error

-## Expected behavior
+**Expected behavior**
 A clear and concise description of what you expected to happen.

-## Log Files and Screenshots
+**Log Files and Screenshots**
 *Always* provide a link to the flight log file:
 - Download the flight log file from the vehicle ([tutorial](https://docs.px4.io/master/en/getting_started/flight_reporting.html)).
- Upload the log to the [PX4 Flight Review](http://logs.px4.io/)
- Share the link to the log (Copy and paste the URL of the log)
+- Share the link to a log showing the problem on [PX4 Flight Review](http://logs.px4.io/).

 Add screenshots to help explain your problem.

-## Drone (please complete the following information):
+**Drone (please complete the following information):**
 - Describe the type of drone.
 - Photo of the IMU / autopilot setup if possible.

-## Additional context
+**Additional context**
 Add any other context about the problem here.
@@ -1,20 +1,19 @@
 ---
 name: 🚀 Feature Request
 about: Suggest an idea for this project
-labels: feature-request

 ---

 For general questions please use [PX4 Discuss](http://discuss.px4.io/) or Slack (you can find an invite link on this project README).

-## Describe problem solved by the proposed feature
+**Describe problem solved by the proposed feature**
 A clear and concise description of the problem, if any, this feature will solve. E.g. I'm always frustrated when ...

-## Describe your preferred solution
+**Describe your preferred solution**
 A clear and concise description of what you want to happen.

-## Describe possible alternatives
+**Describe possible alternatives**
 A clear and concise description of alternative solutions or features you've considered.

-## Additional context
+**Additional context**
 Add any other context or screenshots for the feature request here.
@@ -1,13 +1,10 @@
 ---
 name: ⛔ Support Question
-about: See http://discuss.px4.io/ for questions about using PX4.
+about: See [PX4 Discuss](http://discuss.px4.io/) for questions about using PX4.

 ---

-## Attention! Please read the note below
-
-We use GitHub issues only to discuss PX4 bugs and new features.
-
-**For questions about using PX4 or related components, please use [PX4 Discuss](http://discuss.px4.io/).**
+We use GitHub issues only to discuss PX4 bugs and new features. For
+questions about using PX4 or related components, please use [PX4 Discuss](http://discuss.px4.io/).

 Thanks!
@@ -1,11 +1,9 @@
 ---
 name: ⛔ Documentation Issue
-about: See https://github.com/PX4/px4_user_guide for documentation issues
+about: See https://github.com/PX4/Devguide for documentation issues

 ---

-## Attention! Please read the note below
-
-**Please submit the documentation issue to the [User Guide](https://github.com/PX4/px4_user_guide) repository.**
+PX4 has dedicated repositories for developer documentation (https://github.com/PX4/Devguide) and user documentation (https://github.com/PX4/px4_user_guide).

 Thanks!
@@ -1,14 +0,0 @@
-**How this PR solves the problem**
-Depending on how complex the PR is, something between a line and a few paragraphs with logs and videos.
-
-**JIRA ID in title, and link here**
-Add a link and the title of the JIRA for context
-
-**Upstream/develop PR that this was backported from**
-If applicable, link to PR and/or commit
-
-**Critical bug that needs backporting?**
-Yes/No, link to backport PR when applicable
-
-**Additional context**
-Add any other related context or media.
@@ -0,0 +1,34 @@
+name: ClusterFuzzLite batch fuzzing
+on:
+  schedule:
+    - cron: '0 6 * * *'  # UTC 6am every day.
+permissions: read-all
+jobs:
+  BatchFuzzing:
+    runs-on: ubuntu-latest
+    strategy:
+      fail-fast: false
+      matrix:
+        sanitizer:
+        - address
+        - undefined
+        - memory
+    steps:
+    - name: Build Fuzzers (${{ matrix.sanitizer }})
+      id: build
+      uses: google/clusterfuzzlite/actions/build_fuzzers@v1
+      with:
+        sanitizer: ${{ matrix.sanitizer }}
+    - name: Run Fuzzers (${{ matrix.sanitizer }})
+      id: run
+      uses: google/clusterfuzzlite/actions/run_fuzzers@v1
+      with:
+        github-token: ${{ secrets.GITHUB_TOKEN }}
+        fuzz-seconds: 1800 # 30 mins
+        mode: 'batch'
+        sanitizer: ${{ matrix.sanitizer }}
+        # Optional but recommended: For storing certain artifacts from fuzzing.
+        # See later section on "Git repo for storage".
+        # storage-repo: https://${{ secrets.PERSONAL_ACCESS_TOKEN }}@github.com/OWNER/STORAGE-REPO-NAME.git
+        # storage-repo-branch: main   # Optional. Defaults to "main"
+        # storage-repo-branch-coverage: gh-pages  # Optional. Defaults to "gh-pages".
@@ -0,0 +1,51 @@
+name: Checks
+
+on:
+  push:
+    branches:
+    - 'master'
+  pull_request:
+    branches:
+    - '*'
+
+jobs:
+  build:
+    runs-on: ubuntu-latest
+    strategy:
+      fail-fast: false
+      matrix:
+        check: [
+          "check_format",
+          "tests",
+          "tests_coverage",
+          "px4_fmu-v2_default stack_check",
+          "validate_module_configs",
+          "shellcheck_all",
+          "NO_NINJA_BUILD=1 px4_fmu-v5_default",
+          "NO_NINJA_BUILD=1 px4_sitl_default",
+          "BUILD_MICRORTPS_AGENT=1 px4_sitl_rtps",
+          "airframe_metadata",
+          "module_documentation",
+          "parameters_metadata",
+        ]
+    container:
+      image: px4io/px4-dev-nuttx-focal:2021-09-08
+      options: --privileged --ulimit core=-1 --security-opt seccomp=unconfined
+    steps:
+    - uses: actions/checkout@v1
+      with:
+        token: ${{ secrets.ACCESS_TOKEN }}
+
+    - name: check environment
+      run: |
+          export
+          ulimit -a
+    - name: ${{matrix.check}}
+      run: make ${{matrix.check}}
+    - name: upload coverage
+      if: contains(matrix.check, 'coverage')
+      uses: codecov/codecov-action@v1
+      with:
+        token: ${{ secrets.CODECOV_TOKEN }}
+        flags: unittests
+        file: coverage/lcov.info
@@ -0,0 +1,21 @@
+name: Clang Tidy
+
+on:
+  push:
+    branches:
+    - 'master'
+  pull_request:
+    branches:
+    - '*'
+
+jobs:
+  build:
+    runs-on: ubuntu-latest
+    container: px4io/px4-dev-clang:2021-09-08
+    steps:
+    - uses: actions/checkout@v1
+      with:
+        token: ${{secrets.ACCESS_TOKEN}}
+
+    - name: make clang-tidy-quiet
+      run: make clang-tidy-quiet
@@ -0,0 +1,54 @@
+name: Linux Targets
+
+on:
+  push:
+    branches:
+    - 'master'
+  pull_request:
+    branches:
+    - '*'
+
+jobs:
+  build:
+    runs-on: ubuntu-latest
+    container: px4io/px4-dev-armhf:2021-09-08
+    strategy:
+      matrix:
+        config: [
+          beaglebone_blue_default,
+          emlid_navio2_default,
+          px4_raspberrypi_default,
+          scumaker_pilotpi_default,
+          ]
+    steps:
+    - uses: actions/checkout@v1
+      with:
+        token: ${{secrets.ACCESS_TOKEN}}
+
+    - name: Prepare ccache timestamp
+      id: ccache_cache_timestamp
+      shell: cmake -P {0}
+      run: |
+        string(TIMESTAMP current_date "%Y-%m-%d-%H;%M;%S" UTC)
+        message("::set-output name=timestamp::${current_date}")
+    - name: ccache cache files
+      uses: actions/cache@v2
+      with:
+        path: ~/.ccache
+        key: ${{matrix.config}}-ccache-${{steps.ccache_cache_timestamp.outputs.timestamp}}
+        restore-keys: ${{matrix.config}}-ccache-
+    - name: setup ccache
+      run: |
+          mkdir -p ~/.ccache
+          echo "base_dir = ${GITHUB_WORKSPACE}" > ~/.ccache/ccache.conf
+          echo "compression = true" >> ~/.ccache/ccache.conf
+          echo "compression_level = 6" >> ~/.ccache/ccache.conf
+          echo "max_size = 100M" >> ~/.ccache/ccache.conf
+          echo "hash_dir = false" >> ~/.ccache/ccache.conf
+          ccache -s
+          ccache -z
+
+    - name: make ${{matrix.config}}
+      run: make ${{matrix.config}}
+    - name: ccache post-run
+      run: ccache -s
@@ -0,0 +1,51 @@
+name: Linux ARM64 Targets
+
+on:
+  push:
+    branches:
+    - 'master'
+  pull_request:
+    branches:
+    - '*'
+
+jobs:
+  build:
+    runs-on: ubuntu-latest
+    container: px4io/px4-dev-aarch64:2021-09-08
+    strategy:
+      matrix:
+        config: [
+          scumaker_pilotpi_arm64,
+          ]
+    steps:
+    - uses: actions/checkout@v1
+      with:
+        token: ${{secrets.ACCESS_TOKEN}}
+
+    - name: Prepare ccache timestamp
+      id: ccache_cache_timestamp
+      shell: cmake -P {0}
+      run: |
+        string(TIMESTAMP current_date "%Y-%m-%d-%H;%M;%S" UTC)
+        message("::set-output name=timestamp::${current_date}")
+    - name: ccache cache files
+      uses: actions/cache@v2
+      with:
+        path: ~/.ccache
+        key: ${{matrix.config}}-ccache-${{steps.ccache_cache_timestamp.outputs.timestamp}}
+        restore-keys: ${{matrix.config}}-ccache-
+    - name: setup ccache
+      run: |
+          mkdir -p ~/.ccache
+          echo "base_dir = ${GITHUB_WORKSPACE}" > ~/.ccache/ccache.conf
+          echo "compression = true" >> ~/.ccache/ccache.conf
+          echo "compression_level = 6" >> ~/.ccache/ccache.conf
+          echo "max_size = 100M" >> ~/.ccache/ccache.conf
+          echo "hash_dir = false" >> ~/.ccache/ccache.conf
+          ccache -s
+          ccache -z
+
+    - name: make ${{matrix.config}}
+      run: make ${{matrix.config}}
+    - name: ccache post-run
+      run: ccache -s
@@ -0,0 +1,56 @@
+name: MacOS build
+
+on:
+  push:
+    branches:
+    - 'master'
+  pull_request:
+    branches:
+    - '*'
+
+jobs:
+  build:
+    runs-on: macos-10.15
+    strategy:
+      matrix:
+        config: [
+          px4_fmu-v5_default,
+          px4_sitl
+          #tests, # includes px4_sitl
+          ]
+    steps:
+    - uses: actions/checkout@v1
+      with:
+        token: ${{secrets.ACCESS_TOKEN}}
+
+    - name: setup
+      run: ./Tools/setup/macos.sh; ./Tools/setup/macos.sh
+
+    - name: Prepare ccache timestamp
+      id: ccache_cache_timestamp
+      shell: cmake -P {0}
+      run: |
+        string(TIMESTAMP current_date "%Y-%m-%d-%H;%M;%S" UTC)
+        message("::set-output name=timestamp::${current_date}")
+    - name: ccache cache files
+      uses: actions/cache@v2
+      with:
+        path: ~/.ccache
+        key: macos_${{matrix.config}}-ccache-${{steps.ccache_cache_timestamp.outputs.timestamp}}
+        restore-keys: macos_${{matrix.config}}-ccache-
+    - name: setup ccache
+      run: |
+          mkdir -p ~/.ccache
+          echo "base_dir = ${GITHUB_WORKSPACE}" > ~/.ccache/ccache.conf
+          echo "compression = true" >> ~/.ccache/ccache.conf
+          echo "compression_level = 6" >> ~/.ccache/ccache.conf
+          echo "max_size = 40M" >> ~/.ccache/ccache.conf
+          echo "hash_dir = false" >> ~/.ccache/ccache.conf
+          ccache -s
+          ccache -z
+
+    - name: make ${{matrix.config}}
+      run: |
+          ccache -z
+          make ${{matrix.config}}
+          ccache -s
@@ -0,0 +1,120 @@
+name: Nuttx Targets
+
+on:
+  push:
+    branches:
+    - 'master'
+  pull_request:
+    branches:
+    - '*'
+
+jobs:
+  build:
+    runs-on: ubuntu-latest
+    container: px4io/px4-dev-nuttx-focal:2021-09-08
+    strategy:
+      fail-fast: false
+      matrix:
+        config: [
+          airmind_mindpx-v2,
+          ark_can-flow,
+          ark_can-gps,
+          ark_can-rtk-gps,
+          atl_mantis-edu,
+          av_x-v1,
+          bitcraze_crazyflie,
+          bitcraze_crazyflie21,
+          cuav_can-gps-v1,
+          cuav_nora,
+          cuav_x7pro,
+          cubepilot_cubeorange,
+          cubepilot_cubeyellow,
+          freefly_can-rtk-gps,
+          holybro_can-gps-v1,
+          holybro_durandal-v1,
+          holybro_kakutef7,
+          holybro_kakuteh7,
+          holybro_pix32v5,
+          matek_h743-slim,
+          matek_gnss-m9n-f4,
+          modalai_fc-v1,
+          modalai_fc-v2,
+          mro_ctrl-zero-f7,
+          mro_ctrl-zero-f7-oem,
+          mro_ctrl-zero-h7,
+          mro_ctrl-zero-h7-oem,
+          mro_pixracerpro,
+          mro_x21,
+          mro_x21-777,
+          nxp_fmuk66-e,
+          nxp_fmuk66-v3,
+          nxp_fmurt1062-v1,
+          nxp_ucans32k146,
+          omnibus_f4sd,
+          raspberrypi_pico,
+          px4_fmu-v2,
+          px4_fmu-v3,
+          px4_fmu-v4,
+          px4_fmu-v4pro,
+          px4_fmu-v5,
+          px4_fmu-v5x,
+          px4_fmu-v6u,
+          px4_fmu-v6x,
+          spracing_h7extreme,
+          uvify_core
+          ]
+    steps:
+    - uses: actions/checkout@v1
+      with:
+        token: ${{secrets.ACCESS_TOKEN}}
+
+    - name: Prepare ccache timestamp
+      id: ccache_cache_timestamp
+      shell: cmake -P {0}
+      run: |
+        string(TIMESTAMP current_date "%Y-%m-%d-%H;%M;%S" UTC)
+        message("::set-output name=timestamp::${current_date}")
+    - name: ccache cache files
+      uses: actions/cache@v2
+      with:
+        path: ~/.ccache
+        key: ${{matrix.config}}-ccache-${{steps.ccache_cache_timestamp.outputs.timestamp}}
+        restore-keys: ${{matrix.config}}-ccache-
+    - name: setup ccache
+      run: |
+          mkdir -p ~/.ccache
+          echo "base_dir = ${GITHUB_WORKSPACE}" > ~/.ccache/ccache.conf
+          echo "compression = true" >> ~/.ccache/ccache.conf
+          echo "compression_level = 6" >> ~/.ccache/ccache.conf
+          echo "max_size = 120M" >> ~/.ccache/ccache.conf
+          echo "hash_dir = false" >> ~/.ccache/ccache.conf
+          ccache -s
+          ccache -z
+
+    - name: make all_variants_${{matrix.config}}
+      run: make all_variants_${{matrix.config}}
+      timeout-minutes: 45
+    - name: make ${{matrix.config}} bloaty_compileunits
+      run: make ${{matrix.config}} bloaty_compileunits || true
+    - name: make ${{matrix.config}} bloaty_inlines
+      run: make ${{matrix.config}} bloaty_inlines || true
+    - name: make ${{matrix.config}} bloaty_segments
+      run: make ${{matrix.config}} bloaty_segments || true
+    - name: make ${{matrix.config}} bloaty_symbols
+      run: make ${{matrix.config}} bloaty_symbols || true
+    - name: make ${{matrix.config}} bloaty_templates
+      run: make ${{matrix.config}} bloaty_templates || true
+    - name: make ${{matrix.config}} bloaty_ram
+      run: make ${{matrix.config}} bloaty_ram || true
+    - name: make ${{matrix.config}} bloaty_compare_master
+      run: make ${{matrix.config}} bloaty_compare_master || true
+    - name: ccache post-run
+      run: ccache -s
+
+    - name: Upload px4 package
+      uses: actions/upload-artifact@v2
+      with:
+        name: px4_package_${{matrix.config}}
+        path: |
+          build/**/*.px4
+          build/**/*.bin
@@ -0,0 +1,54 @@
+name: Deploy metadata for all targets
+
+on:
+  push:
+    branches:
+    - 'master'
+    - 'release/*'
+    - 'pr-metadata-test'
+
+jobs:
+  enumerate_targets:
+    runs-on: ubuntu-latest
+    container: px4io/px4-dev-base-focal:2021-09-08
+    outputs:
+      matrix: ${{ steps.set-matrix.outputs.matrix }}
+    steps:
+    - uses: actions/checkout@v1
+      with:
+        token: ${{secrets.ACCESS_TOKEN}}
+    - id: set-matrix
+      run: echo "::set-output name=matrix::$(./Tools/generate_board_targets_json.py)"
+  build:
+    runs-on: ubuntu-latest
+    needs: enumerate_targets
+    strategy:
+      matrix: ${{fromJson(needs.enumerate_targets.outputs.matrix)}}
+    container: px4io/px4-dev-${{ matrix.container }}:2021-09-08
+    steps:
+    - uses: actions/checkout@v1
+      with:
+        token: ${{secrets.ACCESS_TOKEN}}
+
+    - name: make ${{matrix.target}}
+      run: make ${{matrix.target}}
+
+    - name: parameter & events metadata
+      run: |
+        make ${{matrix.target}} ver_gen events_json actuators_json
+        ./src/lib/version/get_git_tag_or_branch_version.sh build/${{ matrix.target }} >> $GITHUB_ENV
+        cd build/${{ matrix.target }}
+        mkdir _metadata || true
+        cp parameters.* events/*.xz actuators.json* _metadata
+
+    - uses: jakejarvis/s3-sync-action@master
+      with:
+        args: --acl public-read
+      env:
+        AWS_S3_BUCKET: 'px4-travis'
+        AWS_ACCESS_KEY_ID: ${{ secrets.AWS_ACCESS_KEY_ID }}
+        AWS_SECRET_ACCESS_KEY: ${{ secrets.AWS_SECRET_ACCESS_KEY }}
+        AWS_REGION: 'us-west-1'
+        SOURCE_DIR: 'build/${{ matrix.target }}/_metadata/'
+        DEST_DIR: 'Firmware/${{ env.version }}/${{ matrix.target }}/'
+
@@ -0,0 +1,21 @@
+name: EKF Change Indicator
+
+on: pull_request
+
+jobs:
+  unit_tests:
+    runs-on: ubuntu-latest
+    container: px4io/px4-dev-base-focal:2021-09-08
+    steps:
+    - uses: actions/checkout@v2.3.1
+      with:
+        fetch-depth: 0
+    - name: checkout newest version of branch
+      run: |
+        git fetch origin pull/${{github.event.pull_request.number}}/head:${{github.head_ref}}
+        git checkout ${GITHUB_HEAD_REF}
+    - name: main test
+      run: make tests TESTFILTER=EKF
+    - name: Check if there is a functional change
+      run: git diff --exit-code
+      working-directory: src/modules/ekf2/test/change_indication
@@ -0,0 +1,29 @@
+name: EKF Update Change Indicator
+
+on: push
+
+jobs:
+  unit_tests:
+    runs-on: ubuntu-latest
+    container: px4io/px4-dev-base-focal:2021-09-08
+    env:
+      GIT_COMMITTER_EMAIL: bot@px4.io
+      GIT_COMMITTER_NAME: PX4BuildBot
+    steps:
+    - uses: actions/checkout@v2.3.1
+      with:
+        fetch-depth: 0
+    - name: main test updates change indication files
+      run: make tests TESTFILTER=EKF
+    - name: Check if there exists diff and save result in variable
+      run: echo "CHANGE_INDICATED=$(git diff --exit-code --output=/dev/null || echo $?)" >> $GITHUB_ENV
+      working-directory: src/modules/ekf2/test/change_indication
+    - name: auto-commit any changes to change indication
+      uses: stefanzweifel/git-auto-commit-action@v4
+      with:
+        commit_message: '[AUTO COMMIT] update change indication'
+        commit_user_name: ${GIT_COMMITTER_NAME}
+        commit_user_email: ${GIT_COMMITTER_EMAIL}
+    - if: ${{env.CHANGE_INDICATED}}
+      name: if there is a functional change, fail check
+      run: exit 1
@@ -0,0 +1,139 @@
+name: MAVROS Mission Tests
+
+on:
+  push:
+    branches:
+    - 'master'
+  pull_request:
+    branches:
+    - '*'
+
+jobs:
+  build:
+    runs-on: ubuntu-latest
+    strategy:
+      fail-fast: false
+      matrix:
+        config:
+          - {vehicle: "iris",          mission: "MC_mission_box",  build_type: "RelWithDebInfo"}
+          - {vehicle: "rover",         mission: "rover_mission_1", build_type: "RelWithDebInfo"}
+          #- {vehicle: "plane",         mission: "FW_mission_1",    build_type: "RelWithDebInfo"}
+          #- {vehicle: "plane_catapult",mission: "FW_mission_1",    build_type: "RelWithDebInfo"}
+          #- {vehicle: "standard_vtol", mission: "VTOL_mission_1",  build_type: "Coverage"}
+          #- {vehicle: "standard_vtol", mission: "VTOL_mission_1",  build_type: "AddressSanitizer"}
+          #- {vehicle: "tailsitter",    mission: "VTOL_mission_1",  build_type: "RelWithDebInfo"}
+          #- {vehicle: "tiltrotor",     mission: "VTOL_mission_1",  build_type: "RelWithDebInfo"}
+
+    container:
+      image: px4io/px4-dev-ros-melodic:2021-09-08
+      options: --privileged --ulimit core=-1 --security-opt seccomp=unconfined
+    steps:
+    - uses: actions/checkout@v1
+      with:
+        token: ${{ secrets.ACCESS_TOKEN }}
+
+    - name: Prepare ccache timestamp
+      id: ccache_cache_timestamp
+      shell: cmake -P {0}
+      run: |
+        string(TIMESTAMP current_date "%Y-%m-%d-%H;%M;%S" UTC)
+        message("::set-output name=timestamp::${current_date}")
+    - name: ccache cache files
+      uses: actions/cache@v2
+      with:
+        path: ~/.ccache
+        key: sitl_tests-${{matrix.config.build_type}}-ccache-${{steps.ccache_cache_timestamp.outputs.timestamp}}
+        restore-keys: sitl_tests-${{matrix.config.build_type}}-ccache-
+    - name: setup ccache
+      run: |
+          mkdir -p ~/.ccache
+          echo "base_dir = ${GITHUB_WORKSPACE}" > ~/.ccache/ccache.conf
+          echo "compression = true" >> ~/.ccache/ccache.conf
+          echo "compression_level = 6" >> ~/.ccache/ccache.conf
+          echo "max_size = 100M" >> ~/.ccache/ccache.conf
+          echo "hash_dir = false" >> ~/.ccache/ccache.conf
+          ccache -s
+          ccache -z
+
+    - name: check environment
+      run: |
+          export
+          ulimit -a
+    - name: Build PX4 and sitl_gazebo
+      env:
+        PX4_CMAKE_BUILD_TYPE: ${{matrix.config.build_type}}
+      run: |
+        ccache -z
+        make px4_sitl_default
+        make px4_sitl_default sitl_gazebo
+        ccache -s
+
+    - name: Core dump settings
+      run: |
+          ulimit -c unlimited
+          echo "`pwd`/%e.core" > /proc/sys/kernel/core_pattern
+
+    - name: Run SITL tests
+      env:
+        PX4_CMAKE_BUILD_TYPE: ${{matrix.config.build_type}}
+      run: |
+        export
+        ./test/rostest_px4_run.sh mavros_posix_test_mission.test mission:=${{matrix.config.mission}} vehicle:=${{matrix.config.vehicle}}
+      timeout-minutes: 45
+
+    - name: Look at core files
+      if: failure()
+      run: gdb build/px4_sitl_default/bin/px4 px4.core -ex "thread apply all bt" -ex "quit"
+    - name: Upload px4 coredump
+      if: failure()
+      uses: actions/upload-artifact@v2-preview
+      with:
+        name: coredump
+        path: px4.core
+
+    - name: ecl EKF analysis
+      if: always()
+      run: ./Tools/ecl_ekf/process_logdata_ekf.py ~/.ros/log/*/*.ulg || true
+
+    - name: Upload logs to flight review
+      if: always()
+      run: ./Tools/upload_log.py -q --description "${GITHUB_WORKFLOW} ${GITHUB_RUN_ID}" --feedback "${GITHUB_WORKFLOW} ${GITHUB_RUN_ID} ${GITHUB_REPOSITORY} ${GITHUB_REF}" --source CI ~/.ros/log/*/*.ulg
+
+    - name: Upload px4 binary
+      if: failure()
+      uses: actions/upload-artifact@v2
+      with:
+        name: binary
+        path: build/px4_sitl_default/bin/px4
+
+    - name: Store PX4 log
+      if: failure()
+      uses: actions/upload-artifact@v2
+      with:
+        name: px4_log
+        path: ~/.ros/log/*/*.ulg
+
+    - name: Store ROS log
+      if: failure()
+      uses: actions/upload-artifact@v2
+      with:
+        name: ros_log
+        path: ~/.ros/**/rostest-*.log
+
+    # Report test coverage
+    - name: Upload coverage
+      if: contains(matrix.config.build_type, 'Coverage')
+      run: |
+          git config --global credential.helper "" # disable the keychain credential helper
+          git config --global --add credential.helper store # enable the local store credential helper
+          echo "https://x-access-token:${{ secrets.ACCESS_TOKEN }}@github.com" >> ~/.git-credentials # add credential
+          git config --global url."https://github.com/".insteadof git@github.com: # credentials add credential
+          mkdir -p coverage
+          lcov --directory build/px4_sitl_default --base-directory build/px4_sitl_default --gcov-tool gcov --capture -o coverage/lcov.info
+    - name: Upload coverage information to Codecov
+      if: contains(matrix.config.build_type, 'Coverage')
+      uses: codecov/codecov-action@v1
+      with:
+        token: ${{ secrets.CODECOV_TOKEN }}
+        flags: mavros_mission
+        file: coverage/lcov.info
@@ -0,0 +1,134 @@
+name: MAVROS Offboard Tests
+
+on:
+  push:
+    branches:
+    - 'master'
+  pull_request:
+    branches:
+    - '*'
+
+jobs:
+  build:
+    runs-on: ubuntu-latest
+    strategy:
+      fail-fast: false
+      matrix:
+        config:
+          - {test_file: "mavros_posix_tests_offboard_posctl.test",    vehicle: "iris", build_type: "RelWithDebInfo"}
+          #- {test_file: "mavros_posix_tests_offboard_attctl.test",    vehicle: "iris", build_type: "RelWithDebInfo"}
+          #- {test_file: "mavros_posix_tests_offboard_rpyrt_ctl.test", vehicle: "iris", build_type: "RelWithDebInfo"}
+
+    container:
+      image: px4io/px4-dev-ros-melodic:2021-09-08
+      options: --privileged --ulimit core=-1 --security-opt seccomp=unconfined
+    steps:
+    - uses: actions/checkout@v1
+      with:
+        token: ${{ secrets.ACCESS_TOKEN }}
+
+    - name: Prepare ccache timestamp
+      id: ccache_cache_timestamp
+      shell: cmake -P {0}
+      run: |
+        string(TIMESTAMP current_date "%Y-%m-%d-%H;%M;%S" UTC)
+        message("::set-output name=timestamp::${current_date}")
+    - name: ccache cache files
+      uses: actions/cache@v2
+      with:
+        path: ~/.ccache
+        key: sitl_tests-${{matrix.config.build_type}}-ccache-${{steps.ccache_cache_timestamp.outputs.timestamp}}
+        restore-keys: sitl_tests-${{matrix.config.build_type}}-ccache-
+    - name: setup ccache
+      run: |
+          mkdir -p ~/.ccache
+          echo "base_dir = ${GITHUB_WORKSPACE}" > ~/.ccache/ccache.conf
+          echo "compression = true" >> ~/.ccache/ccache.conf
+          echo "compression_level = 6" >> ~/.ccache/ccache.conf
+          echo "max_size = 100M" >> ~/.ccache/ccache.conf
+          echo "hash_dir = false" >> ~/.ccache/ccache.conf
+          ccache -s
+          ccache -z
+
+    - name: check environment
+      run: |
+          export
+          ulimit -a
+    - name: Build PX4 and sitl_gazebo
+      env:
+        PX4_CMAKE_BUILD_TYPE: ${{matrix.config.build_type}}
+      run: |
+        ccache -z
+        make px4_sitl_default
+        make px4_sitl_default sitl_gazebo
+        ccache -s
+
+    - name: Core dump settings
+      run: |
+          ulimit -c unlimited
+          echo "`pwd`/%e.core" > /proc/sys/kernel/core_pattern
+
+    - name: Run SITL tests
+      env:
+        PX4_CMAKE_BUILD_TYPE: ${{matrix.config.build_type}}
+      run: |
+        export
+        ./test/rostest_px4_run.sh ${{matrix.config.test_file}} vehicle:=${{matrix.config.vehicle}}
+      timeout-minutes: 45
+
+    - name: Look at core files
+      if: failure()
+      run: gdb build/px4_sitl_default/bin/px4 px4.core -ex "thread apply all bt" -ex "quit"
+    - name: Upload px4 coredump
+      if: failure()
+      uses: actions/upload-artifact@v2-preview
+      with:
+        name: coredump
+        path: px4.core
+
+    - name: ecl EKF analysis
+      if: always()
+      run: ./Tools/ecl_ekf/process_logdata_ekf.py ~/.ros/log/*/*.ulg || true
+
+    - name: Upload logs to flight review
+      if: always()
+      run: ./Tools/upload_log.py -q --description "${GITHUB_WORKFLOW} ${GITHUB_RUN_ID}" --feedback "${GITHUB_WORKFLOW} ${GITHUB_RUN_ID} ${GITHUB_REPOSITORY} ${GITHUB_REF}" --source CI ~/.ros/log/*/*.ulg
+
+    - name: Upload px4 binary
+      if: failure()
+      uses: actions/upload-artifact@v2
+      with:
+        name: binary
+        path: build/px4_sitl_default/bin/px4
+
+    - name: Store PX4 log
+      if: failure()
+      uses: actions/upload-artifact@v2
+      with:
+        name: px4_log
+        path: ~/.ros/log/*/*.ulg
+
+    - name: Store ROS log
+      if: failure()
+      uses: actions/upload-artifact@v2
+      with:
+        name: ros_log
+        path: ~/.ros/**/rostest-*.log
+
+    # Report test coverage
+    - name: Upload coverage
+      if: contains(matrix.config.build_type, 'Coverage')
+      run: |
+          git config --global credential.helper "" # disable the keychain credential helper
+          git config --global --add credential.helper store # enable the local store credential helper
+          echo "https://x-access-token:${{ secrets.ACCESS_TOKEN }}@github.com" >> ~/.git-credentials # add credential
+          git config --global url."https://github.com/".insteadof git@github.com: # credentials add credential
+          mkdir -p coverage
+          lcov --directory build/px4_sitl_default --base-directory build/px4_sitl_default --gcov-tool gcov --capture -o coverage/lcov.info
+    - name: Upload coverage information to Codecov
+      if: contains(matrix.config.build_type, 'Coverage')
+      uses: codecov/codecov-action@v1
+      with:
+        token: ${{ secrets.CODECOV_TOKEN }}
+        flags: mavros_offboard
+        file: coverage/lcov.info
@@ -0,0 +1,157 @@
+name: Metadata
+
+on:
+  push:
+    branches:
+    - 'master'
+    - 'release/*'
+    - 'pr-metadata-test'
+
+jobs:
+
+  airframe:
+    runs-on: ubuntu-latest
+    container: px4io/px4-dev-base-focal:2021-09-08
+    steps:
+    - uses: actions/checkout@v1
+      with:
+        token: ${{ secrets.ACCESS_TOKEN }}
+
+    - name: airframe metadata
+      run: |
+        make airframe_metadata
+        ./src/lib/version/get_git_tag_or_branch_version.sh build/px4_sitl_default >> $GITHUB_ENV
+        cd build/px4_sitl_default/docs
+      # TODO: deploy to userguide gitbook
+
+    - uses: jakejarvis/s3-sync-action@master
+      with:
+        args: --acl public-read
+      env:
+        AWS_S3_BUCKET: 'px4-travis'
+        AWS_ACCESS_KEY_ID: ${{ secrets.AWS_ACCESS_KEY_ID }}
+        AWS_SECRET_ACCESS_KEY: ${{ secrets.AWS_SECRET_ACCESS_KEY }}
+        AWS_REGION: 'us-west-1'
+        SOURCE_DIR: 'build/px4_sitl_default/docs/'
+        DEST_DIR: 'Firmware/${{ env.version }}/_general/'
+
+  module:
+    runs-on: ubuntu-latest
+    container: px4io/px4-dev-base-focal:2021-09-08
+    steps:
+    - uses: actions/checkout@v1
+      with:
+        token: ${{ secrets.ACCESS_TOKEN }}
+
+    - name: module documentation
+      run: |
+        make module_documentation
+        cd build/px4_sitl_default/docs
+        ls -ls *
+      # TODO: deploy to userguide gitbook and s3
+
+  parameter:
+    runs-on: ubuntu-latest
+    container: px4io/px4-dev-base-focal:2021-09-08
+    steps:
+    - uses: actions/checkout@v1
+      with:
+        token: ${{ secrets.ACCESS_TOKEN }}
+
+    - name: parameter metadata
+      run: |
+        make parameters_metadata
+        ./src/lib/version/get_git_tag_or_branch_version.sh build/px4_sitl_default >> $GITHUB_ENV
+
+    - uses: jakejarvis/s3-sync-action@master
+      with:
+        args: --acl public-read
+      env:
+        AWS_S3_BUCKET: 'px4-travis'
+        AWS_ACCESS_KEY_ID: ${{ secrets.AWS_ACCESS_KEY_ID }}
+        AWS_SECRET_ACCESS_KEY: ${{ secrets.AWS_SECRET_ACCESS_KEY }}
+        AWS_REGION: 'us-west-1'
+        SOURCE_DIR: 'build/px4_sitl_default/docs/'
+        DEST_DIR: 'Firmware/${{ env.version }}/_general/'
+
+  events:
+    runs-on: ubuntu-latest
+    container: px4io/px4-dev-base-focal:2021-09-08
+    steps:
+    - uses: actions/checkout@v1
+      with:
+        token: ${{ secrets.ACCESS_TOKEN }}
+
+    - name: events metadata
+      run: |
+        make extract_events
+        ./src/lib/version/get_git_tag_or_branch_version.sh build/px4_sitl_default >> $GITHUB_ENV
+        cd build/px4_sitl_default
+        mkdir _events_full || true
+        cp events/all_events_full.json.xz _events_full/all_events.json.xz
+
+    - uses: jakejarvis/s3-sync-action@master
+      with:
+        args: --acl public-read
+      env:
+        AWS_S3_BUCKET: 'px4-travis'
+        AWS_ACCESS_KEY_ID: ${{ secrets.AWS_ACCESS_KEY_ID }}
+        AWS_SECRET_ACCESS_KEY: ${{ secrets.AWS_SECRET_ACCESS_KEY }}
+        AWS_REGION: 'us-west-1'
+        SOURCE_DIR: 'build/px4_sitl_default/_events_full/'
+        DEST_DIR: 'Firmware/${{ env.version }}/_general/'
+
+  uorb_graph:
+    runs-on: ubuntu-latest
+    container: px4io/px4-dev-nuttx-focal:2021-09-08
+    steps:
+    - uses: actions/checkout@v1
+      with:
+        token: ${{ secrets.ACCESS_TOKEN }}
+
+    - name: uORB graph
+      run: |
+        make uorb_graphs
+        cd Tools/uorb_graph
+        ls -ls *
+      # TODO: deploy graph_px4_sitl.json to S3 px4-travis:Firmware/master/
+
+  micrortps_agent:
+    runs-on: ubuntu-latest
+    container: px4io/px4-dev-base-focal:2021-09-08
+    steps:
+    - uses: actions/checkout@v1
+      with:
+        token: ${{ secrets.ACCESS_TOKEN }}
+
+    - name: microRTPS agent
+      run: |
+        make px4_sitl_rtps
+        git clone https://github.com/PX4/micrortps_agent.git
+        cp -R build/px4_sitl_rtps/src/modules/micrortps_bridge/micrortps_agent/* micrortps_agent
+
+  ROS_msgs:
+    runs-on: ubuntu-latest
+    container: px4io/px4-dev-base-focal:2021-09-08
+    steps:
+    - uses: actions/checkout@v1
+      with:
+        token: ${{ secrets.ACCESS_TOKEN }}
+
+    - name: PX4 ROS msgs
+      run: |
+        git clone https://github.com/PX4/px4_msgs.git
+        python3 msg/tools/uorb_to_ros_msgs.py msg/ px4_msgs/msg/
+
+  ROS2_bridge:
+    runs-on: ubuntu-latest
+    container: px4io/px4-dev-base-focal:2021-09-08
+    steps:
+    - uses: actions/checkout@v1
+      with:
+        token: ${{ secrets.ACCESS_TOKEN }}
+
+    - name: PX4 ROS2 bridge
+      run: |
+        git clone https://github.com/PX4/px4_ros_com.git
+        ./msg/tools/uorb_to_ros_urtps_topics.py -i msg/tools/urtps_bridge_topics.yaml -o px4_ros_com/templates/urtps_bridge_topics.yaml
@@ -0,0 +1,25 @@
+name: Python CI Checks
+
+on:
+  push:
+    branches:
+    - 'master'
+  pull_request:
+    branches:
+    - '*'
+
+jobs:
+  build:
+    runs-on: ubuntu-latest
+    steps:
+    - uses: actions/checkout@v1
+      with:
+        token: ${{ secrets.ACCESS_TOKEN }}
+    - name: Install Python3
+      run: sudo apt-get install python3 python3-setuptools python3-pip -y
+    - name: Install tools
+      run: pip3 install --user mypy types-requests flake8
+    - name: Check MAVSDK test scripts with mypy
+      run: $HOME/.local/bin/mypy --strict test/mavsdk_tests/*.py
+    - name: Check MAVSDK test scripts with flake8
+      run: $HOME/.local/bin/flake8 test/mavsdk_tests/*.py
@@ -0,0 +1,135 @@
+name: SITL Tests
+
+on:
+  push:
+    branches:
+    - 'master'
+  pull_request:
+    branches:
+    - '*'
+
+jobs:
+  build:
+    runs-on: ubuntu-latest
+    strategy:
+      fail-fast: false
+      matrix:
+        config:
+          - {model: "iris",          latitude:  "59.617693", longitude: "-151.145316", altitude:  "48", build_type: "RelWithDebInfo" } # Alaska
+          - {model: "standard_vtol", latitude: "-38.071235", longitude:  "145.281220", altitude:  "31", build_type: "AddressSanitizer" } # Australia
+          - {model: "tailsitter" ,   latitude:  "29.660316", longitude:  "-82.316658", altitude:  "30", build_type: "RelWithDebInfo" } # Florida
+          - {model: "standard_vtol", latitude:  "47.397742", longitude:    "8.545594", altitude: "488", build_type: "Coverage" } # Zurich
+
+    container:
+      image: px4io/px4-dev-simulation-focal:2021-09-08
+      options: --privileged --ulimit core=-1 --security-opt seccomp=unconfined
+    steps:
+    - uses: actions/checkout@v1
+      with:
+        token: ${{ secrets.ACCESS_TOKEN }}
+
+    - name: Download MAVSDK
+      run: wget "https://github.com/mavlink/MAVSDK/releases/download/v$(cat test/mavsdk_tests/MAVSDK_VERSION)/mavsdk_$(cat test/mavsdk_tests/MAVSDK_VERSION)_ubuntu20.04_amd64.deb"
+    - name: Install MAVSDK
+      run: dpkg -i "mavsdk_$(cat test/mavsdk_tests/MAVSDK_VERSION)_ubuntu20.04_amd64.deb"
+
+    - name: Prepare ccache timestamp
+      id: ccache_cache_timestamp
+      shell: cmake -P {0}
+      run: |
+        string(TIMESTAMP current_date "%Y-%m-%d-%H;%M;%S" UTC)
+        message("::set-output name=timestamp::${current_date}")
+    - name: ccache cache files
+      uses: actions/cache@v2
+      with:
+        path: ~/.ccache
+        key: sitl_tests-${{matrix.config.build_type}}-ccache-${{steps.ccache_cache_timestamp.outputs.timestamp}}
+        restore-keys: sitl_tests-${{matrix.config.build_type}}-ccache-
+    - name: setup ccache
+      run: |
+          mkdir -p ~/.ccache
+          echo "base_dir = ${GITHUB_WORKSPACE}" > ~/.ccache/ccache.conf
+          echo "compression = true" >> ~/.ccache/ccache.conf
+          echo "compression_level = 6" >> ~/.ccache/ccache.conf
+          echo "max_size = 100M" >> ~/.ccache/ccache.conf
+          echo "hash_dir = false" >> ~/.ccache/ccache.conf
+          ccache -s
+          ccache -z
+
+    - name: check environment
+      env:
+        PX4_HOME_LAT: ${{matrix.config.latitude}}
+        PX4_HOME_LON: ${{matrix.config.longitude}}
+        PX4_HOME_ALT: ${{matrix.config.altitude}}
+        PX4_CMAKE_BUILD_TYPE: ${{matrix.config.build_type}}
+      run: |
+          export
+          ulimit -a
+    - name: Build PX4
+      env:
+        PX4_CMAKE_BUILD_TYPE: ${{matrix.config.build_type}}
+      run: make px4_sitl_default
+    - name: ccache post-run px4/firmware
+      run: ccache -s
+    - name: Build SITL Gazebo
+      env:
+        PX4_CMAKE_BUILD_TYPE: ${{matrix.config.build_type}}
+      run: make px4_sitl_default sitl_gazebo
+    - name: ccache post-run sitl_gazebo
+      run: ccache -s
+    - name: Build MAVSDK tests
+      env:
+        PX4_CMAKE_BUILD_TYPE: ${{matrix.config.build_type}}
+        DONT_RUN: 1
+      run: make px4_sitl_default gazebo mavsdk_tests
+    - name: ccache post-run mavsdk_tests
+      run: ccache -s
+
+    - name: Core dump settings
+      run: |
+          ulimit -c unlimited
+          echo "`pwd`/%e.core" > /proc/sys/kernel/core_pattern
+
+    - name: Run SITL tests
+      env:
+        PX4_HOME_LAT: ${{matrix.config.latitude}}
+        PX4_HOME_LON: ${{matrix.config.longitude}}
+        PX4_HOME_ALT: ${{matrix.config.altitude}}
+        PX4_CMAKE_BUILD_TYPE: ${{matrix.config.build_type}}
+      run: test/mavsdk_tests/mavsdk_test_runner.py --speed-factor 20 --abort-early --model ${{matrix.config.model}} --upload test/mavsdk_tests/configs/sitl.json --verbose
+      timeout-minutes: 45
+
+    - name: Look at core files
+      if: failure()
+      run: gdb build/px4_sitl_default/bin/px4 px4.core -ex "thread apply all bt" -ex "quit"
+    - name: Upload px4 coredump
+      if: failure()
+      uses: actions/upload-artifact@v2-preview
+      with:
+        name: coredump
+        path: px4.core
+
+    - name: Upload px4 binary
+      if: failure()
+      uses: actions/upload-artifact@v2-preview
+      with:
+        name: binary
+        path: build/px4_sitl_default/bin/px4
+
+    # Report test coverage
+    - name: Upload coverage
+      if: contains(matrix.config.build_type, 'Coverage')
+      run: |
+          git config --global credential.helper "" # disable the keychain credential helper
+          git config --global --add credential.helper store # enable the local store credential helper
+          echo "https://x-access-token:${{ secrets.ACCESS_TOKEN }}@github.com" >> ~/.git-credentials # add credential
+          git config --global url."https://github.com/".insteadof git@github.com: # credentials add credential
+          mkdir -p coverage
+          lcov --directory build/px4_sitl_default --base-directory build/px4_sitl_default --gcov-tool gcov --capture -o coverage/lcov.info
+    - name: Upload coverage information to Codecov
+      if: contains(matrix.config.build_type, 'Coverage')
+      uses: codecov/codecov-action@v1
+      with:
+        token: ${{ secrets.CODECOV_TOKEN }}
+        flags: mavsdk
+        file: coverage/lcov.info
@@ -1,6 +1,6 @@
 [submodule "src/modules/mavlink/mavlink"]
 	path = src/modules/mavlink/mavlink
-	url = https://github.com/Auterion/mavlink.git
+	url = https://github.com/mavlink/mavlink.git
 	branch = master
 [submodule "src/drivers/uavcan/libuavcan"]
 	path = src/drivers/uavcan/libuavcan
@@ -12,8 +12,8 @@
 	branch = master
 [submodule "Tools/sitl_gazebo"]
 	path = Tools/sitl_gazebo
-	url = git@github.com:Auterion/sitl_gazebo.git
-	branch = develop
+	url = https://github.com/PX4/PX4-SITL_gazebo.git
+	branch = master
 [submodule "src/drivers/gps/devices"]
 	path = src/drivers/gps/devices
 	url = https://github.com/PX4/PX4-GPSDrivers.git
@@ -36,14 +36,14 @@
 [submodule "Tools/jsbsim_bridge"]
 	path = Tools/jsbsim_bridge
 	url = https://github.com/PX4/px4-jsbsim-bridge.git
-[submodule "src/drivers/cyphal/libcanard"]
-	path = src/drivers/cyphal/libcanard
-	url = https://github.com/opencyphal/libcanard.git
-[submodule "src/drivers/cyphal/public_regulated_data_types"]
-	path = src/drivers/cyphal/public_regulated_data_types
-	url = https://github.com/opencyphal/public_regulated_data_types.git
-[submodule "src/drivers/cyphal/legacy_data_types"]
-	path = src/drivers/cyphal/legacy_data_types
+[submodule "src/drivers/uavcan_v1/libcanard"]
+	path = src/drivers/uavcan_v1/libcanard
+	url = https://github.com/UAVCAN/libcanard.git
+[submodule "src/drivers/uavcan_v1/public_regulated_data_types"]
+	path = src/drivers/uavcan_v1/public_regulated_data_types
+	url = https://github.com/UAVCAN/public_regulated_data_types.git
+[submodule "src/drivers/uavcan_v1/legacy_data_types"]
+	path = src/drivers/uavcan_v1/legacy_data_types
 	url = https://github.com/PX4/public_regulated_data_types.git
 	branch = legacy
 [submodule "src/lib/crypto/monocypher"]
@@ -64,6 +64,3 @@
 	path = src/lib/crypto/libtommath
 	url = https://github.com/PX4/libtommath.git
 	branch = px4
-[submodule "src/modules/microdds_client/Micro-XRCE-DDS-Client"]
-	path = src/modules/microdds_client/Micro-XRCE-DDS-Client
-	url = https://github.com/eProsima/Micro-XRCE-DDS-Client.git
@@ -9,5 +9,3 @@ launch.json
 ipch/

 browse.vc.db*
-
-*.log
@@ -121,16 +121,6 @@ CONFIG:
      buildType: MinSizeRel
      settings:
        CONFIG: ark_can-rtk-gps_canbootloader
-    ark_cannode_default:
-      short: ark_cannode_default
-      buildType: MinSizeRel
-      settings:
-        CONFIG: ark_cannode_default
-    ark_cannode_canbootloader:
-      short: ark_cannode_canbootloader
-      buildType: MinSizeRel
-      settings:
-        CONFIG: ark_cannode_canbootloader
    atl_mantis-edu_default:
      short: atl_mantis-edu
      buildType: MinSizeRel
@@ -126,6 +126,8 @@
        },
        "search.showLineNumbers": true,
        "telemetry.enableTelemetry": false,
+        "terminal.integrated.copyOnSelection": true,
+        "terminal.integrated.rightClickBehavior": "paste",
        "terminal.integrated.scrollback": 5000,
        "window.title": "${dirty} ${activeEditorMedium}${separator}${rootName}",
        "workbench.editor.highlightModifiedTabs": true,
@@ -99,7 +99,7 @@
 #
 #=============================================================================

-cmake_minimum_required(VERSION 3.9 FATAL_ERROR)
+cmake_minimum_required(VERSION 3.2 FATAL_ERROR)

 set(PX4_SOURCE_DIR "${CMAKE_CURRENT_SOURCE_DIR}" CACHE FILEPATH "PX4 source directory" FORCE)
 set(PX4_BINARY_DIR "${CMAKE_CURRENT_BINARY_DIR}" CACHE FILEPATH "PX4 binary directory" FORCE)
@@ -175,12 +175,6 @@ include(kconfig)
 message(STATUS "PX4 config: ${PX4_CONFIG}")
 message(STATUS "PX4 platform: ${PX4_PLATFORM}")

-if($ENV{CLION_IDE})
-	# CLion automatically executes some compiler commands after configuring the
-	# project. This would fail on NuttX, as visibility.h tries to (indirectly)
-	# include nuttx/config.h, which at that point does not exist yet
-	add_definitions(-DPX4_DISABLE_GCC_POISON)
-endif()

 if(${PX4_PLATFORM} STREQUAL "posix")
 	if(ENABLE_LOCKSTEP_SCHEDULER)
@@ -191,18 +185,6 @@ if(${PX4_PLATFORM} STREQUAL "posix")
 	endif()
 endif()

-
-option(PX4_RESTRICTED_BUILD "Enable restricted build (limit param access)" OFF)
-if(PX4_RESTRICTED_BUILD)
-	add_definitions(-DPX4_RESTRICTED_BUILD)
-	message(STATUS "Enabling restricted build")
-endif()
-
-if(PX4_EXPORT_CONTROLLED_BUILD)
-	add_definitions(-DPX4_EXPORT_CONTROLLED_BUILD)
-	message(STATUS "Enabling export controlled build (with flight time and wind restrictions)")
-endif()
-
 # external modules
 set(EXTERNAL_MODULES_LOCATION "" CACHE STRING "External modules source location")

@@ -252,14 +234,6 @@ message(STATUS "cmake build type: ${CMAKE_BUILD_TYPE}")
 #
 project(px4 CXX C ASM)

-# Check if LTO option and check if toolchain supports it
-if(LTO)
-    include(CheckIPOSupported)
-    check_ipo_supported()
-    message(AUTHOR_WARNING "LTO enabled: LTO is highly experimental and should not be used in production")
-    set(CMAKE_INTERPROCEDURAL_OPTIMIZATION TRUE)
-endif()
-
 set(package-contact "px4users@googlegroups.com")

 set(CMAKE_CXX_STANDARD 14)
@@ -51,13 +51,6 @@ menu "Toolchain"
        string "Architecture"
        default ""

-    config BOARD_LTO
-        bool "(EXPERIMENTAL) Link Time Optimization (LTO)"
-        default n
-        help
-            Enables LTO flag in linker
-            Note: Highly EXPERIMENTAL, furthermore make sure you're using a modern compiler GCC 9 or later
-
    config BOARD_FULL_OPTIMIZATION
        bool "Full optmization (O3)"
        default n
@@ -129,22 +129,6 @@ else
 	BUILD_DIR_SUFFIX :=
 endif

-ifdef PX4_RESTRICTED_BUILD
-	CMAKE_ARGS += -DPX4_RESTRICTED_BUILD=ON
-	BUILD_DIR_SUFFIX := $(BUILD_DIR_SUFFIX)_restricted
-endif
-
-# pass the PX4_EXPORT_CONTROLLED_BUILD on to CMAKE_ARGS, and set it to 0 (OFF) by default
-PX4_EXPORT_CONTROLLED_BUILD ?= 0
-ifeq ($(PX4_EXPORT_CONTROLLED_BUILD),1)
-	CMAKE_ARGS += -DPX4_EXPORT_CONTROLLED_BUILD=ON
-	BUILD_DIR_SUFFIX := $(BUILD_DIR_SUFFIX)_export_controlled
-else ifeq ($(PX4_EXPORT_CONTROLLED_BUILD),0)
-	CMAKE_ARGS += -DPX4_EXPORT_CONTROLLED_BUILD=OFF
-else
-        $(error ERROR: Invalid value of flag PX4_EXPORT_CONTROLLED_BUILD, has to be '0' or '1')
-endif
-
 # additional config parameters passed to cmake
 ifdef EXTERNAL_MODULES_LOCATION
 	CMAKE_ARGS += -DEXTERNAL_MODULES_LOCATION:STRING=$(EXTERNAL_MODULES_LOCATION)
@@ -261,12 +245,6 @@ define deprecation_warning
 	$(warning $(1) has been deprecated and will be removed, please use $(2)!)
 endef

-skynode:
-	$(MAKE) px4_fmu-v5x $(ARGS)
-
-skynode_rtps:
-	$(MAKE) px4_fmu-v5x_rtps $(ARGS)
-
 # All targets with just dependencies but no recipe must either be marked as phony (or have the special @: as recipe).
 .PHONY: all px4_sitl_default all_config_targets all_default_targets

@@ -336,9 +314,7 @@ uorb_graphs:
 	@$(MAKE) --no-print-directory px4_fmu-v5_default uorb_graph
 	@$(MAKE) --no-print-directory px4_sitl_default uorb_graph

-px4io_update:
-	@$(MAKE) --no-print-directory px4_io-v2_default
-	@$(MAKE) --no-print-directory cubepilot_io-v2_default
+px4io_update: px4_io-v2_default cubepilot_io-v2_default
 	# px4_io-v2_default
 	cp build/px4_io-v2_default/px4_io-v2_default.bin boards/holybro/durandal-v1/extras/px4_io-v2_default.bin
 	cp build/px4_io-v2_default/px4_io-v2_default.bin boards/holybro/pix32v5/extras/px4_io-v2_default.bin
@@ -349,13 +325,12 @@ px4io_update:
 	cp build/px4_io-v2_default/px4_io-v2_default.bin boards/px4/fmu-v5/extras/px4_io-v2_default.bin
 	cp build/px4_io-v2_default/px4_io-v2_default.bin boards/px4/fmu-v5x/extras/px4_io-v2_default.bin
 	cp build/px4_io-v2_default/px4_io-v2_default.bin boards/px4/fmu-v6x/extras/px4_io-v2_default.bin
-	cp build/px4_io-v2_default/px4_io-v2_default.bin boards/px4/fmu-v6c/extras/px4_io-v2_default.bin
 	# cubepilot_io-v2_default
 	cp build/cubepilot_io-v2_default/cubepilot_io-v2_default.bin boards/cubepilot/cubeorange/extras/cubepilot_io-v2_default.bin
 	cp build/cubepilot_io-v2_default/cubepilot_io-v2_default.bin boards/cubepilot/cubeyellow/extras/cubepilot_io-v2_default.bin
 	git status

-bootloaders_update: cuav_nora_bootloader cuav_x7pro_bootloader cubepilot_cubeorange_bootloader holybro_durandal-v1_bootloader holybro_kakuteh7_bootloader matek_h743_bootloader matek_h743-mini_bootloader matek_h743-slim_bootloader modalai_fc-v2_bootloader mro_ctrl-zero-classic_bootloader mro_ctrl-zero-h7_bootloader mro_ctrl-zero-h7-oem_bootloader mro_pixracerpro_bootloader px4_fmu-v6c_bootloader px4_fmu-v6u_bootloader px4_fmu-v6x_bootloader
+bootloaders_update: cuav_nora_bootloader cuav_x7pro_bootloader cubepilot_cubeorange_bootloader holybro_durandal-v1_bootloader matek_h743-slim_bootloader modalai_fc-v2_bootloader mro_ctrl-zero-h7_bootloader mro_ctrl-zero-h7-oem_bootloader mro_pixracerpro_bootloader px4_fmu-v6u_bootloader px4_fmu-v6x_bootloader
 	git status

 .PHONY: coverity_scan
@@ -0,0 +1,17 @@
+Please use [PX4 Discuss](http://discuss.px4.io/) or [Slack](http://slack.px4.io/) to align on pull requests if necessary. You can then open draft pull requests to get early feedback.
+
+**Describe problem solved by this pull request**
+A clear and concise description of the problem this proposed change will solve.
+E.g. For this use case I ran into...
+
+**Describe your solution**
+A clear and concise description of what you have implemented.
+
+**Describe possible alternatives**
+A clear and concise description of alternative solutions or features you've considered.
+
+**Test data / coverage**
+How was it tested? What cases were covered? Logs uploaded to https://review.px4.io/ and screenshots of the important plot parts.
+
+**Additional context**
+Add any other related context or media.
@@ -88,7 +88,7 @@ unset BOARD_RC_SENSORS
 # Check for flow sensor
 if param compare SENS_EN_PX4FLOW 1
 then
-	px4flow start -X &
+	px4flow start -X
 fi

 uavcannode start
@@ -1,101 +0,0 @@
-#!/bin/sh
-#
-# @name 6DoF Omnicopter SITL
-#
-# @type Quadrotor Wide
-#
-# @maintainer Jaeyoung Lim <jalim@ethz.ch>
-#
-
-. ${R}etc/init.d/rc.mc_defaults
-
-param set-default SYS_CTRL_ALLOC 1
-
-
-param set-default CA_AIRFRAME 0
-
-param set-default CA_ROTOR_COUNT 8
-param set-default CA_R_REV 255
-
-param set-default CA_ROTOR0_PX 0.14435
-param set-default CA_ROTOR0_PY -0.14435
-param set-default CA_ROTOR0_PZ -0.14435
-param set-default CA_ROTOR0_KM 0.05 # CCW
-param set-default CA_ROTOR0_AX -0.788675
-param set-default CA_ROTOR0_AY -0.211325
-param set-default CA_ROTOR0_AZ -0.57735
-
-param set-default CA_ROTOR1_PX -0.14435
-param set-default CA_ROTOR1_PY -0.14435
-param set-default CA_ROTOR1_PZ -0.14435
-param set-default CA_ROTOR1_KM 0.05
-param set-default CA_ROTOR1_AX 0.211325
-param set-default CA_ROTOR1_AY -0.788675
-param set-default CA_ROTOR1_AZ 0.57735
-
-param set-default CA_ROTOR2_PX 0.14435
-param set-default CA_ROTOR2_PY 0.14435
-param set-default CA_ROTOR2_PZ -0.14435
-param set-default CA_ROTOR2_KM 0.05
-param set-default CA_ROTOR2_AX -0.211325
-param set-default CA_ROTOR2_AY 0.788675
-param set-default CA_ROTOR2_AZ 0.57735
-
-param set-default CA_ROTOR3_PX -0.14435
-param set-default CA_ROTOR3_PY 0.14435
-param set-default CA_ROTOR3_PZ -0.14435
-param set-default CA_ROTOR3_KM 0.05
-param set-default CA_ROTOR3_AX 0.788675
-param set-default CA_ROTOR3_AY 0.211325
-param set-default CA_ROTOR3_AZ -0.57735
-
-param set-default CA_ROTOR4_PX 0.14435
-param set-default CA_ROTOR4_PY -0.14435
-param set-default CA_ROTOR4_PZ 0.14435
-param set-default CA_ROTOR4_KM 0.05
-param set-default CA_ROTOR4_AX 0.788675
-param set-default CA_ROTOR4_AY 0.211325
-param set-default CA_ROTOR4_AZ -0.57735
-
-param set-default CA_ROTOR5_PX -0.14435
-param set-default CA_ROTOR5_PY -0.14435
-param set-default CA_ROTOR5_PZ 0.14435
-param set-default CA_ROTOR5_KM 0.05
-param set-default CA_ROTOR5_AX -0.211325
-param set-default CA_ROTOR5_AY 0.788675
-param set-default CA_ROTOR5_AZ 0.57735
-
-param set-default CA_ROTOR6_PX 0.14435
-param set-default CA_ROTOR6_PY 0.14435
-param set-default CA_ROTOR6_PZ 0.14435
-param set-default CA_ROTOR6_KM 0.05
-param set-default CA_ROTOR6_AX 0.211325
-param set-default CA_ROTOR6_AY -0.788675
-param set-default CA_ROTOR6_AZ 0.57735
-
-param set-default CA_ROTOR7_PX -0.14435
-param set-default CA_ROTOR7_PY 0.14435
-param set-default CA_ROTOR7_PZ 0.14435
-param set-default CA_ROTOR7_KM 0.05
-param set-default CA_ROTOR7_AX -0.788675
-param set-default CA_ROTOR7_AY -0.211325
-param set-default CA_ROTOR7_AZ -0.57735
-
-param set-default PWM_MAIN_FUNC1 101
-param set-default PWM_MAIN_FUNC2 102
-param set-default PWM_MAIN_FUNC3 103
-param set-default PWM_MAIN_FUNC4 104
-param set-default PWM_MAIN_FUNC5 105
-param set-default PWM_MAIN_FUNC6 106
-param set-default PWM_MAIN_FUNC7 107
-param set-default PWM_MAIN_FUNC8 108
-
-# disable MC desaturation which improves attitude tracking
-param set-default CA_METHOD 0
-
-# disable attitude failure detection
-param set-default FD_FAIL_P 0
-param set-default FD_FAIL_R 0
-
-set MIXER skip
-set MIXER_AUX none
@@ -1,10 +0,0 @@
-
-mixer append /dev/pwm_output0 etc/mixers/mount_legs.aux.mix
-
-mavlink start -x -u 14558 -r 4000 -f -m onboard -o 14530
-
-# shellcheck disable=SC2154
-mavlink stream -r 10 -s MOUNT_ORIENTATION -u $udp_gcs_port_local
-# shellcheck disable=SC2154
-mavlink stream -r 50 -s ATTITUDE_QUATERNION -u $udp_offboard_port_local
-mavlink stream -r 10 -s MOUNT_ORIENTATION -u $udp_offboard_port_local
@@ -1,12 +0,0 @@
-#!/bin/sh
-#
-# @name Quadrotor SITL model for JSBSim
-#
-# @type Quadrotor Wide
-#
-# @maintainer Jaeyoung Lim <jaeyoung@auterion.com>
-#
-
-. ${R}etc/init.d/rc.mc_defaults
-
-set MIXER quad_w
@@ -1,30 +0,0 @@
-#!/bin/sh
-#
-# @name Hexacopter SITL model for JSBSim
-#
-# @type Hexarotor x
-#
-# @maintainer Jaeyoung Lim <jaeyoung@auterion.com>
-#
-
-. ${R}etc/init.d/rc.mc_defaults
-
-param set-default MC_PITCHRATE_P 0.1
-param set-default MC_PITCHRATE_I 0.05
-param set-default MC_PITCH_P 6.0
-param set-default MC_ROLLRATE_P 0.15
-param set-default MC_ROLLRATE_I 0.1
-param set-default MC_ROLL_P 6.0
-param set-default MPC_XY_VEL_I_ACC 4
-param set-default MPC_XY_VEL_P_ACC 3
-
-param set-default RTL_DESCEND_ALT 10
-
-param set-default TRIG_INTERFACE 3
-param set-default TRIG_MODE 4
-param set-default MNT_MODE_IN 4
-param set-default MNT_DO_STAB 2
-
-param set-default MAV_TYPE 13
-
-set MIXER hexa_x
@@ -1,23 +0,0 @@
-#!/bin/sh
-#
-# @name QuadrotorX SITL for SIH
-#
-# @type Quadrotor
-#
-# @maintainer Romain Chiappinelli <romain.chiap@gmail.com>
-#
-
-. ${R}etc/init.d/rc.mc_defaults
-
-set MIXER quad_x
-
-# disable some checks to allow to fly:
-# - with usb
-param set-default CBRK_USB_CHK 197848
-# - without real battery
-param set-default CBRK_SUPPLY_CHK 894281
-# - without safety switch
-param set-default COM_PREARM_MODE 0
-param set-default CBRK_IO_SAFETY 22027
-
-param set SIH_VEHICLE_TYPE 0
@@ -1,33 +0,0 @@
-#!/bin/sh
-#
-# @name Plane SITL for SIH
-#
-# @type Plane
-#
-# @maintainer Romain Chiappinelli <romain.chiap@gmail.com>
-
-. ${R}etc/init.d/rc.fw_defaults
-
-set MIXER AERT
-
-# disable some checks to allow to fly:
-# - with usb
-param set-default CBRK_USB_CHK 197848
-# - without real battery
-param set-default CBRK_SUPPLY_CHK 894281
-# - without safety switch
-param set-default COM_PREARM_MODE 0
-param set-default CBRK_IO_SAFETY 22027
-
-param set-default BAT_N_CELLS 3
-
-param set SIH_T_MAX 6.0
-param set SIH_MASS 0.3
-param set SIH_IXX 0.00402
-param set SIH_IYY 0.0144
-param set SIH_IZZ 0.0177
-param set SIH_IXZ 0.00046
-param set SIH_KDV 0.2
-
-param set SIH_VEHICLE_TYPE 1 	# sih as fixed wing
-param set RWTO_TKOFF 1  # enable takeoff from runway (as opposed to launched)
@@ -1,45 +0,0 @@
-#!/bin/sh
-#
-# @name SIH Tailsitter Duo
-#
-# @type VTOL
-#
-# @maintainer Romain Chiappinelli <romain.chiap@gmail.com>
-
-. ${R}etc/init.d/rc.vtol_defaults
-
-param set-default VT_ELEV_MC_LOCK 0
-param set-default VT_TYPE 0
-param set-default VT_FW_DIFTHR_EN 1
-param set-default VT_FW_DIFTHR_SC 0.3
-param set-default MPC_MAN_Y_MAX 60
-param set-default MC_PITCH_P 5
-
-param set-default MAV_TYPE 19
-set MAV_TYPE 19
-set MIXER vtol_tailsitter_duo_sat
-
-# disable some checks to allow to fly:
-# - with usb
-param set-default CBRK_USB_CHK 197848
-# - without real battery
-param set-default CBRK_SUPPLY_CHK 894281
-# - without safety switch
-param set-default COM_PREARM_MODE 0
-param set-default CBRK_IO_SAFETY 22027
-
-param set-default BAT_N_CELLS 3
-
-param set SIH_T_MAX 2.0
-param set SIH_Q_MAX 0.0165
-param set SIH_MASS 0.2
-# IXX and IZZ are inverted from the thesis as the body frame is pitched by 90 deg
-param set SIH_IXX 0.00354
-param set SIH_IYY 0.000625
-param set SIH_IZZ 0.00300
-param set SIH_IXZ 0.0
-param set SIH_KDV 0.2
-param set SIH_L_ROLL 0.145
-
-# sih as tailsitter
-param set SIH_VEHICLE_TYPE 2
@@ -10,7 +10,6 @@
 # enable fusion of landing target velocity
 param set-default LTEST_MODE 1
 param set-default PLD_HACC_RAD 0.1
-param set-default RTL_PLD_MD 2

 # Start up Landing Target Estimator module
 landing_target_estimator start
@@ -1,11 +0,0 @@
-#!/bin/sh
-#
-# @name 3DR Iris Quadrotor SITL (Depth Camera)
-#
-# @type Quadrotor Wide
-#
-
-. ${R}etc/init.d-posix/airframes/10016_iris
-
-# param set COM_OBS_AVOID 1
-param set-default MPC_XY_CRUISE 5.0
@@ -10,22 +10,24 @@ param set-default EKF2_MAG_YAWLIM 0

 param set-default FW_LND_AIRSPD_SC 1
 param set-default FW_LND_ANG 8
+param set-default FW_THR_LND_MAX 0

 param set-default FW_L1_PERIOD 12

+param set-default FW_MAN_P_MAX 30
+
 param set-default FW_PR_P 0.9
 param set-default FW_PR_FF 0.2
 param set-default FW_PSP_OFF 2
+param set-default FW_P_LIM_MAX 32
 param set-default FW_P_LIM_MIN -15

 param set-default FW_RR_FF 0.1
 param set-default FW_RR_P 0.3

-param set-default FW_SPOILERS_LND 0.4
-
 param set-default FW_THR_MAX 0.6
 param set-default FW_THR_MIN 0.05
-param set-default FW_THR_TRIM 0.25
+param set-default FW_THR_CRUISE 0.25

 param set-default FW_T_CLMB_MAX 8
 param set-default FW_T_SINK_MAX 2.7
@@ -7,9 +7,12 @@

 param set-default FW_LND_AIRSPD_SC 1.1
 param set-default FW_LND_ANG 5
+param set-default FW_THR_LND_MAX 0
+param set-default FW_LND_HHDIST 30
 param set-default FW_LND_FL_PMIN 9.5
 param set-default FW_LND_FL_PMAX 20
 param set-default FW_LND_FLALT 5
+param set-default FW_LND_TLALT 15

 param set-default FW_L1_PERIOD 25

@@ -35,6 +38,7 @@ param set-default NAV_DLL_ACT 2
 param set-default RWTO_TKOFF 1

 param set-default RWTO_MAX_PITCH 20
+param set-default RWTO_MAX_ROLL 10

 param set-default RWTO_PSP 8
 param set-default RWTO_AIRSPD_SCL 1.8
@@ -7,9 +7,12 @@

 param set-default FW_LND_AIRSPD_SC 1.1
 param set-default FW_LND_ANG 5
+param set-default FW_THR_LND_MAX 0
+param set-default FW_LND_HHDIST 30
 param set-default FW_LND_FL_PMIN 9.5
 param set-default FW_LND_FL_PMAX 20
 param set-default FW_LND_FLALT 5
+param set-default FW_LND_TLALT 15

 param set-default FW_L1_PERIOD 25

@@ -35,6 +38,7 @@ param set-default NAV_DLL_ACT 2
 param set-default RWTO_TKOFF 1

 param set-default RWTO_MAX_PITCH 20
+param set-default RWTO_MAX_ROLL 10

 param set-default RWTO_PSP 8
 param set-default RWTO_AIRSPD_SCL 1.8
@@ -10,6 +10,7 @@ param set-default EKF2_MAG_YAWLIM 0

 param set-default FW_LND_AIRSPD_SC 1
 param set-default FW_LND_ANG 8
+param set-default FW_THR_LND_MAX 0

 param set-default FW_L1_PERIOD 15

@@ -7,9 +7,12 @@

 param set-default FW_LND_AIRSPD_SC 1.1
 param set-default FW_LND_ANG 5
+param set-default FW_THR_LND_MAX 0
+param set-default FW_LND_HHDIST 30
 param set-default FW_LND_FL_PMIN 9.5
 param set-default FW_LND_FL_PMAX 20
 param set-default FW_LND_FLALT 5
+param set-default FW_LND_TLALT 15

 param set-default FW_L1_PERIOD 25

@@ -34,6 +37,7 @@ param set-default NAV_DLL_ACT 2

 param set-default RWTO_TKOFF 1
 param set-default RWTO_MAX_PITCH 20
+param set-default RWTO_MAX_ROLL 10
 param set-default RWTO_PSP 8
 param set-default RWTO_AIRSPD_SCL 1.8

@@ -10,12 +10,16 @@ param set-default EKF2_MAG_YAWLIM 0

 param set-default FW_LND_AIRSPD_SC 1
 param set-default FW_LND_ANG 8
+param set-default FW_THR_LND_MAX 0

 param set-default FW_L1_PERIOD 12

+param set-default FW_MAN_P_MAX 30
+
 param set-default FW_PR_P 0.9
 param set-default FW_PR_FF 0.2
 param set-default FW_PSP_OFF 2
+param set-default FW_P_LIM_MAX 32
 param set-default FW_P_LIM_MIN -15

 param set-default FW_RR_FF 0.1
@@ -23,7 +27,7 @@ param set-default FW_RR_P 0.3

 param set-default FW_THR_MAX 0.6
 param set-default FW_THR_MIN 0.05
-param set-default FW_THR_TRIM 0.25
+param set-default FW_THR_CRUISE 0.25

 param set-default FW_T_ALT_TC 2
 param set-default FW_T_CLMB_MAX 8
@@ -5,5 +5,5 @@

 . ${R}etc/init.d-posix/airframes/1030_plane

-param set-default FW_THR_TRIM 0.0
+param set-default FW_THR_CRUISE 0.0
 param set-default RWTO_TKOFF 0
@@ -7,11 +7,6 @@

 . ${R}etc/init.d/rc.vtol_defaults

-# TODO: Enable motor failure detection when the
-# VTOL no longer reports 0A for all ESCs in SITL
-param set-default FD_ACT_EN 0
-param set-default FD_ACT_MOT_TOUT 500
-
 # param set-default SYS_CTRL_ALLOC 1
 param set-default CA_AIRFRAME 2

@@ -49,20 +44,21 @@ param set-default PWM_MAIN_FUNC7 202
 param set-default PWM_MAIN_FUNC8 203

 param set-default FW_L1_PERIOD 12
+param set-default FW_MAN_P_MAX 30
 param set-default FW_PR_FF 0.2
 param set-default FW_PR_P 0.9
 param set-default FW_PSP_OFF 2
+param set-default FW_P_LIM_MAX 32
 param set-default FW_P_LIM_MIN -15
 param set-default FW_RR_FF 0.1
 param set-default FW_RR_P 0.3
-param set-default FW_THR_TRIM 0.25
+param set-default FW_THR_CRUISE 0.25
 param set-default FW_THR_MAX 0.6
 param set-default FW_THR_MIN 0.05
 param set-default FW_T_CLMB_MAX 8
 param set-default FW_T_SINK_MAX 2.7
 param set-default FW_T_SINK_MIN 2.2

-param set-default MC_AIRMODE 1
 param set-default MC_ROLLRATE_P 0.3
 param set-default MC_YAW_P 1.6

@@ -75,6 +71,7 @@ param set-default MPC_XY_VEL_I_ACC 4
 param set-default MPC_XY_VEL_D_ACC 0.1

 param set-default NAV_ACC_RAD 5
+param set-default NAV_LOITER_RAD 80

 param set-default VT_FWD_THRUST_EN 4
 param set-default VT_F_TRANS_THR 0.75
@@ -44,12 +44,14 @@ param set-default PWM_MAIN_FUNC7 202
 param set-default PWM_MAIN_REV 96 # invert both elevons

 param set-default FW_L1_PERIOD 12
+param set-default FW_MAN_P_MAX 30
 param set-default FW_PR_I 0.2
 param set-default FW_PR_P 0.2
 param set-default FW_PSP_OFF 2
+param set-default FW_P_LIM_MAX 32
 param set-default FW_P_LIM_MIN -15
 param set-default FW_RR_P 0.2
-param set-default FW_THR_TRIM 0.33
+param set-default FW_THR_CRUISE 0.33
 param set-default FW_THR_MAX 0.6
 param set-default FW_THR_MIN 0.05
 param set-default FW_T_ALT_TC 2
@@ -59,7 +61,6 @@ param set-default FW_T_SINK_MAX 2.7
 param set-default FW_T_SINK_MIN 2.2
 param set-default FW_T_TAS_TC 2

-param set-default MC_AIRMODE 1
 param set-default MC_ROLLRATE_P 0.3

 param set-default MPC_ACC_HOR_MAX 2
@@ -69,6 +70,7 @@ param set-default MPC_XY_VEL_I_ACC 4
 param set-default MPC_XY_VEL_D_ACC 0.1

 param set-default NAV_ACC_RAD 5
+param set-default NAV_LOITER_RAD 80

 param set-default VT_FW_DIFTHR_EN 1
 param set-default VT_FW_DIFTHR_SC 0.5
@@ -9,7 +9,7 @@

 param set-default MAV_TYPE 21

-param set-default SYS_CTRL_ALLOC 1
+# param set-default SYS_CTRL_ALLOC 1
 param set-default CA_AIRFRAME 3

 param set-default CA_ROTOR_COUNT 4
@@ -27,7 +27,9 @@ param set-default CA_ROTOR3_PY 0.1875
 param set-default CA_ROTOR3_KM -0.05

 param set-default CA_ROTOR0_TILT 1
+param set-default CA_ROTOR1_TILT 2
 param set-default CA_ROTOR2_TILT 3
+param set-default CA_ROTOR3_TILT 4
 param set-default CA_SV_CS0_TRQ_R -0.5
 param set-default CA_SV_CS0_TYPE 1
 param set-default CA_SV_CS1_TRQ_R 0.5
@@ -35,7 +37,9 @@ param set-default CA_SV_CS1_TYPE 2
 param set-default CA_SV_CS2_TRQ_P 1.0
 param set-default CA_SV_CS2_TYPE 3
 param set-default CA_SV_CS_COUNT 3
+param set-default CA_SV_TL0_CT 0
 param set-default CA_SV_TL1_CT 0
+param set-default CA_SV_TL2_CT 0
 param set-default CA_SV_TL3_CT 0
 param set-default CA_SV_TL_COUNT 4

@@ -52,13 +56,15 @@ param set-default PWM_MAIN_FUNC10 202
 param set-default PWM_MAIN_FUNC11 203

 param set-default FW_L1_PERIOD 12
+param set-default FW_MAN_P_MAX 30
 param set-default FW_PR_FF 0.2
 param set-default FW_PR_P 0.9
 param set-default FW_PSP_OFF 2
+param set-default FW_P_LIM_MAX 32
 param set-default FW_P_LIM_MIN -15
 param set-default FW_RR_FF 0.1
 param set-default FW_RR_P 0.3
-param set-default FW_THR_TRIM 0.38
+param set-default FW_THR_CRUISE 0.38
 param set-default FW_THR_MAX 0.6
 param set-default FW_THR_MIN 0.05
 param set-default FW_T_CLMB_MAX 8
@@ -66,9 +72,6 @@ param set-default FW_T_SINK_MAX 2.7
 param set-default FW_T_SINK_MIN 2.2

 param set-default MC_YAW_P 1.6
-param set-default MC_AIRMODE 1
-param set-default MC_YAWRATE_P 0.3
-param set-default MC_YAWRATE_I 0.3

 param set-default MIS_TAKEOFF_ALT 10

@@ -79,6 +82,7 @@ param set-default MPC_XY_VEL_I_ACC 4
 param set-default MPC_XY_VEL_D_ACC 0.1

 param set-default NAV_ACC_RAD 5
+param set-default NAV_LOITER_RAD 80

 param set-default VT_B_TRANS_DUR 8
 param set-default VT_FWD_THRUST_EN 4
@@ -8,13 +8,15 @@
 . ${R}etc/init.d/rc.vtol_defaults

 param set-default FW_L1_PERIOD 12
+param set-default FW_MAN_P_MAX 30
 param set-default FW_PR_FF 0.2
 param set-default FW_PR_P 0.9
 param set-default FW_PSP_OFF 2
+param set-default FW_P_LIM_MAX 32
 param set-default FW_P_LIM_MIN -15
 param set-default FW_RR_FF 0.1
 param set-default FW_RR_P 0.3
-param set-default FW_THR_TRIM 0.25
+param set-default FW_THR_CRUISE 0.25
 param set-default FW_THR_MAX 0.6
 param set-default FW_THR_MIN 0.05
 param set-default FW_T_ALT_TC 2
@@ -36,6 +38,7 @@ param set-default MPC_XY_VEL_I_ACC 4
 param set-default MPC_XY_VEL_D_ACC 0.1

 param set-default NAV_ACC_RAD 5
+param set-default NAV_LOITER_RAD 80

 param set-default VT_FWD_THRUST_EN 4
 param set-default VT_F_TRANS_THR 0.75
@@ -1,17 +0,0 @@
-#!/bin/sh
-#
-# @name Standard VTOL with gimbal
-#
-# @type Standard VTOL with gimbal
-#
-
-. ${R}etc/init.d-posix/1040_standard_vtol
-
-param set-default TRIG_INTERFACE 3
-param set-default TRIG_MODE 4
-param set-default MNT_MODE_IN 0
-
-param set-default MAV_TYPE 22
-
-set MIXER_FILE etc/mixers-sitl/standard_vtol_sitl.main.mix
-set MIXER custom
@@ -1,10 +0,0 @@
-
-mixer append /dev/pwm_output0 etc/mixers/mount_legs.aux.mix
-
-mavlink start -x -u 14558 -r 4000 -f -m onboard -o 14530
-
-# shellcheck disable=SC2154
-mavlink stream -r 10 -s MOUNT_ORIENTATION -u $udp_gcs_port_local
-# shellcheck disable=SC2154
-mavlink stream -r 50 -s ATTITUDE_QUATERNION -u $udp_offboard_port_local
-mavlink stream -r 10 -s MOUNT_ORIENTATION -u $udp_offboard_port_local
@@ -1,54 +0,0 @@
-#!/bin/sh
-#
-# @name VTOL Tiltrotor Tricopter
-#
-# @type VTOL Tiltrotor Tricopter
-#
-
-. ${R}etc/init.d/rc.vtol_defaults
-
-param set-default FW_AIRSPD_MAX 25
-param set-default FW_AIRSPD_MIN 14
-param set-default FW_AIRSPD_TRIM 16
-param set-default FW_L1_PERIOD 12
-
-param set-default MC_ROLLRATE_P 0.3
-
-param set-default MIS_LTRMIN_ALT 10
-param set-default MIS_TAKEOFF_ALT 10
-param set-default MIS_YAW_TMT 10
-
-param set-default MC_PITCHRATE_P 0.3
-param set-default MC_PITCH_P 5.0
-param set-default MC_ROLLRATE_P 0.4
-param set-default MC_ROLL_P 5.0
-param set-default MC_YAWRATE_P 0.8
-param set-default MC_YAW_P 1.5
-
-param set-default MPC_ACC_HOR_MAX 2
-param set-default MPC_ACC_HOR_MAX 2
-param set-default MPC_MAN_Y_MAX 70
-param set-default MPC_THR_MIN 0.1
-param set-default MPC_TKO_SPEED 1
-param set-default MPC_XY_P 0.15
-param set-default MPC_XY_VEL_D 0.005
-param set-default MPC_XY_VEL_I 0.2
-param set-default MPC_XY_VEL_P 0.05
-param set-default MPC_Z_VEL_MAX_DN 1.5
-param set-default MPC_Z_VEL_P 0.8
-
-param set-default NAV_ACC_RAD 5
-param set-default NAV_LOITER_RAD 80
-
-param set-default VT_F_TRANS_DUR 5.0
-param set-default VT_F_TRANS_THR 0.75
-param set-default VT_TILT_FW 3.1415
-param set-default VT_TILT_TRANS 1.2
-param set-default VT_ELEV_MC_LOCK 0
-param set-default VT_TYPE 1
-param set-default VT_B_TRANS_DUR 8
-
-param set-default MAV_TYPE 24
-
-set MIXER_FILE etc/mixers-sitl/tiltrotor_tri_sitl.main.mix
-set MIXER custom
@@ -1,39 +0,0 @@
-#!/bin/sh
-#
-# @name Rover
-#
-
-. ${R}etc/init.d/rc.rover_defaults
-
-param set-default GND_L1_DIST 5
-param set-default GND_SP_CTRL_MODE 1
-param set-default GND_SPEED_D 0.001
-param set-default GND_SPEED_I 3
-param set-default GND_SPEED_IMAX 0.125
-param set-default GND_SPEED_P 0.25
-param set-default GND_SPEED_THR_SC 1
-param set-default GND_SPEED_TRIM 4
-param set-default GND_THR_CRUISE 0.3
-param set-default GND_THR_IDLE 0
-param set-default GND_THR_MAX 0.5
-param set-default GND_THR_MIN 0
-
-param set-default MIS_LTRMIN_ALT 0.01
-param set-default MIS_TAKEOFF_ALT 0.01
-param set-default NAV_ACC_RAD 0.5
-param set-default NAV_LOITER_RAD 2
-
-param set-default CBRK_AIRSPD_CHK 162128
-
-param set-default GND_MAX_ANG 0.6
-param set-default GND_WHEEL_BASE 2.0
-
-param set-default TRIG_INTERFACE 3
-param set-default TRIG_MODE 4
-param set-default MNT_MODE_IN 4
-param set-default MNT_MODE_OUT 2
-param set-default MNT_DO_STAB 2
-
-param set-default MAV_TYPE 10
-
-set MIXER_FILE etc/mixers-sitl/rover_ackermann_sitl.main.mix
@@ -1,10 +0,0 @@
-
-mixer append /dev/pwm_output0 etc/mixers/mount_legs.aux.mix
-
-mavlink start -x -u 14558 -r 4000 -f -m onboard -o 14530
-
-# shellcheck disable=SC2154
-mavlink stream -r 10 -s MOUNT_ORIENTATION -u $udp_gcs_port_local
-# shellcheck disable=SC2154
-mavlink stream -r 50 -s ATTITUDE_QUATERNION -u $udp_offboard_port_local
-mavlink stream -r 10 -s MOUNT_ORIENTATION -u $udp_offboard_port_local
@@ -38,9 +38,10 @@ param set-default FW_P_LIM_MAX 25
 param set-default FW_P_LIM_MIN -5
 param set-default FW_R_LIM 30

+param set-default FW_MAN_P_MAX 30.0
 param set-default FW_MAN_R_MAX 30.0

-param set-default FW_THR_TRIM 0.8
+param set-default FW_THR_CRUISE 0.8
 param set-default FW_THR_IDLE 0
 param set-default COM_DISARM_PRFLT 0

@@ -20,14 +20,8 @@ param set-default MC_ROLLRATE_I 0.0400
 param set-default MC_ROLLRATE_D 0.0010
 param set-default MC_ROLL_P 9.0

-param set-default MC_PITCHRATE_P 0.0800
-param set-default MC_PITCHRATE_I 0.0400
-param set-default MC_PITCHRATE_D 0.0010
-param set-default MC_PITCH_P 9.0
-param set-default MC_ROLLRATE_P 0.0800
-param set-default MC_ROLLRATE_I 0.0400
-param set-default MC_ROLLRATE_D 0.0010
-param set-default MC_ROLL_P 9.0
+param set-default MPC_XY_VEL_I_ACC 4
+param set-default MPC_XY_VEL_P_ACC 3

 param set-default RTL_DESCEND_ALT 10
 param set-default RTL_LAND_DELAY 0
@@ -1,4 +1,6 @@

+mixer append /dev/pwm_output0 etc/mixers/mount_legs.aux.mix
+
 mavlink start -x -u 14558 -r 4000 -f -m onboard -o 14530 -p

 # shellcheck disable=SC2154
@@ -35,15 +35,8 @@ px4_add_romfs_files(
 	10016_iris
 	10017_iris_ctrlalloc
 	10018_iris_foggy_lidar
-	10019_omnicopter
 	10020_if750a
-	10020_if750a.post
-	10028_quadrotor_x
-	10029_hexarotor_x
 	10030_px4vision
-	10040_quadx
-	10041_airplane
-	10042_xvert
 	1010_iris_opt_flow
 	1010_iris_opt_flow.post
 	1011_iris_irlock
@@ -59,7 +52,6 @@ px4_add_romfs_files(
 	1020_uuv_generic
 	1021_uuv_hippocampus
 	1022_uuv_bluerov2_heavy
-	1025_iris_depth_camera
 	1030_plane
 	1031_plane_cam
 	1032_plane_catapult
@@ -75,14 +67,9 @@ px4_add_romfs_files(
 	1042_tiltrotor
 	1043_standard_vtol_drop
 	1043_standard_vtol_drop.post
-	1058_standard_vtol_gimbal
-	1058_standard_vtol_gimbal.post
-	1059_tiltrotor_tri
 	1060_rover
 	1061_r1_rover
 	1062_tf-r1
-	1063_rover_gimbal
-	1063_rover_gimbal.post
 	1070_boat
 	3010_quadrotor_x
 	3011_hexarotor_x
@@ -24,19 +24,9 @@ mavlink stream -r 10 -s OPTICAL_FLOW_RAD -u $udp_gcs_port_local

 # API/Offboard link
 mavlink start -x -u $udp_offboard_port_local -r 4000000 -f -m onboard -o $udp_offboard_port_remote
-mavlink stream -r 2 -s COMMAND_CANCEL -u $udp_offboard_port_local

 # Onboard link to camera
 mavlink start -x -u $udp_onboard_payload_port_local -r 4000 -f -m onboard -o $udp_onboard_payload_port_remote

 # Onboard link to gimbal
 mavlink start -x -u $udp_onboard_gimbal_port_local -r 400000 -m gimbal -o $udp_onboard_gimbal_port_remote
-
-# To display for SIH sitl
-if [ "$SIM_MODE" = "sihsim" ]; then
-	udp_sihsim_port_local=$((19450+px4_instance))
-	udp_sihsim_port_remote=$((19410+px4_instance))
-	mavlink start -x -u $udp_sihsim_port_local -r 400000 -m custom -o $udp_sihsim_port_remote
-	mavlink stream -r 200 -s HIL_ACTUATOR_CONTROLS -u  $udp_sihsim_port_local
-	mavlink stream -r 25 -s HIL_STATE_QUATERNION -u  $udp_sihsim_port_local
-fi
@@ -30,7 +30,6 @@ set MIXER_FILE                  none
 set OUTPUT_MODE                 sim
 set EXTRA_MIXER_MODE            none
 set PWM_OUT                     none
-set PWM_AUX_OUT                 none
 set SDCARD_MIXERS_PATH          etc/mixers
 set USE_IO                      no
 set VEHICLE_TYPE                none
@@ -96,15 +95,15 @@ fi

 if param compare SYS_AUTOCONFIG 1
 then
-	# Reset params except Airframe, RC calibration, sensor calibration, flight modes, total flight time, and next flight UUID.
-	param reset_all SYS_AUTOSTART RC* CAL_* COM_FLTMODE* LND_FLIGHT* TC_* COM_FLIGHT*
 	set AUTOCNF yes
+
+	# Wipe out params except RC*, flight modes, total flight time, accel cal, gyro cal, next flight UUID
+	param reset_all SYS_AUTO* RC* COM_FLTMODE* LND_FLIGHT* TC_* CAL_ACC* CAL_GYRO* COM_FLIGHT*
 fi

 # multi-instance setup
 # shellcheck disable=SC2154
 param set MAV_SYS_ID $((px4_instance+1))
-param set MNT_MAV_SYSID $((px4_instance+1))

 if [ $AUTOCNF = yes ]
 then
@@ -156,8 +155,6 @@ param set-default SDLOG_DIRS_MAX 7

 param set-default TRIG_INTERFACE 3

-param set-default SYS_FAILURE_EN 1
-
 # Adapt timeout parameters if simulation runs faster or slower than realtime.
 if [ -n "$PX4_SIM_SPEED_FACTOR" ]; then
 	COM_DL_LOSS_T_LONGER=$(echo "$PX4_SIM_SPEED_FACTOR * 10" | bc)
@@ -199,6 +196,14 @@ fi

 . "$autostart_file"

+#
+# If autoconfig parameter was set, reset it and save parameters.
+#
+if [ $AUTOCNF = yes ]
+then
+	param set SYS_AUTOCONFIG 0
+fi
+
 # Simulator IMU data provided at 250 Hz
 param set IMU_INTEG_RATE 250

@@ -206,11 +211,8 @@ param set IMU_INTEG_RATE 250
 . px4-rc.params

 dataman start
-# start sih in sih_sim mode, otherwise simulator module
-if [ "$SIM_MODE" = "sihsim" ]; then
-	sih start
 # only start the simulator if not in replay mode, as both control the lockstep time
-elif ! replay tryapplyparams
+if ! replay tryapplyparams
 then
  . px4-rc.simulator
 fi
@@ -221,13 +223,6 @@ rc_update start
 manual_control start
 sensors start
 commander start
-
-# Configure vehicle type specific parameters.
-# Note: rc.vehicle_setup is the entry point for rc.interface,
-#       rc.fw_apps, rc.mc_apps, rc.rover_apps, and rc.vtol_apps.
-#
-. ${R}etc/init.d/rc.vehicle_setup
-
 navigator start

 # Try to start the micrortps_client with UDP transport if module exists
@@ -257,11 +252,11 @@ then
 	gyro_calibration start
 fi

-# Payload deliverer module if gripper is enabled
-if param compare -s PD_GRIPPER_EN 1
-then
-	payload_deliverer start
-fi
+# Configure vehicle type specific parameters.
+# Note: rc.vehicle_setup is the entry point for rc.interface,
+#       rc.fw_apps, rc.mc_apps, rc.rover_apps, and rc.vtol_apps.
+#
+. ${R}etc/init.d/rc.vehicle_setup

 #user defined mavlink streams for instances can be in PATH
 . px4-rc.mavlink
@@ -39,10 +39,8 @@ px4_add_romfs_files(
 	rc.balloon_apps
 	rc.balloon_defaults
 	rc.boat_defaults
-	rc.autostart_ext
 	rc.fw_apps
 	rc.fw_defaults
-	rc.heli_defaults
 	rc.interface
 	rc.logging
 	rc.mc_apps
@@ -29,6 +29,9 @@ param set-default FW_L1_DAMPING 0.74
 param set-default FW_L1_PERIOD 16
 param set-default FW_LND_ANG 15
 param set-default FW_LND_FLALT 5
+param set-default FW_LND_HVIRT 13
+param set-default FW_LND_TLALT 5
+param set-default FW_THR_LND_MAX 0
 param set-default FW_PR_FF 0.35
 param set-default FW_PR_P 0.2
 param set-default FW_RR_FF 0.6
@@ -58,8 +61,6 @@ param set-default HIL_ACT_FUNC6 400

 param set SYS_HITL 1

-param set UAVCAN_ENABLE 0
-
 # disable some checks to allow to fly
 # - with usb
 param set-default CBRK_USB_CHK 197848
@@ -0,0 +1,36 @@
+#!/bin/sh
+#
+# @name Team Blacksheep Discovery
+#
+# @type Quadrotor Wide
+# @class Copter
+#
+# @output MAIN1 motor 1
+# @output MAIN2 motor 2
+# @output MAIN3 motor 3
+# @output MAIN4 motor 4
+# @output MAIN5 feed-through of RC AUX1 channel
+# @output MAIN6 feed-through of RC AUX2 channel
+#
+# @output AUX1 feed-through of RC AUX1 channel
+# @output AUX2 feed-through of RC AUX2 channel
+# @output AUX3 feed-through of RC AUX3 channel
+# @output AUX4 feed-through of RC FLAPS channel
+#
+# @maintainer Lorenz Meier <lorenz@px4.io>
+#
+# @board px4_fmu-v2 exclude
+# @board bitcraze_crazyflie exclude
+#
+
+. ${R}etc/init.d/rc.mc_defaults
+
+param set-default MC_ROLLRATE_P 0.1
+param set-default MC_ROLLRATE_I 0.05
+param set-default MC_ROLLRATE_D 0.0017
+param set-default MC_PITCHRATE_P 0.14
+param set-default MC_PITCHRATE_I 0.1
+param set-default MC_PITCHRATE_D 0.0025
+param set-default MC_YAWRATE_P 0.28
+
+set MIXER quad_w
@@ -0,0 +1,40 @@
+#!/bin/sh
+#
+# @name 3DR Iris Quadrotor
+#
+# @type Quadrotor Wide
+# @class Copter
+#
+# @output MAIN1 motor 1
+# @output MAIN2 motor 2
+# @output MAIN3 motor 3
+# @output MAIN4 motor 4
+#
+# @output AUX1 feed-through of RC AUX1 channel
+# @output AUX2 feed-through of RC AUX2 channel
+# @output AUX3 feed-through of RC AUX3 channel
+# @output AUX4 feed-through of RC FLAPS channel
+#
+# @maintainer Lorenz Meier <lorenz@px4.io>
+#
+# @board px4_fmu-v2 exclude
+# @board bitcraze_crazyflie exclude
+#
+
+. ${R}etc/init.d/rc.mc_defaults
+
+# TODO tune roll/pitch separately
+param set-default MC_ROLL_P 7
+param set-default MC_ROLLRATE_I 0.05
+param set-default MC_ROLLRATE_D 0.004
+param set-default MC_PITCH_P 7
+param set-default MC_PITCHRATE_I 0.05
+param set-default MC_PITCHRATE_D 0.004
+param set-default MC_YAW_P 2.5
+param set-default MC_YAWRATE_P 0.25
+param set-default MC_YAWRATE_I 0.25
+
+param set-default BAT1_V_DIV 12.27559
+param set-default BAT1_A_PER_V 15.391030303103
+
+set MIXER quad_w
@@ -0,0 +1,40 @@
+#!/bin/sh
+#
+# @name Steadidrone QU4D
+#
+# @type Quadrotor Wide
+# @class Copter
+#
+# @output MAIN1 motor 1
+# @output MAIN2 motor 2
+# @output MAIN3 motor 3
+# @output MAIN4 motor 4
+# @output MAIN5 feed-through of RC AUX1 channel
+# @output MAIN6 feed-through of RC AUX2 channel
+#
+# @output AUX1 feed-through of RC AUX1 channel
+# @output AUX2 feed-through of RC AUX2 channel
+# @output AUX3 feed-through of RC AUX3 channel
+# @output AUX4 feed-through of RC FLAPS channel
+#
+# @maintainer Lorenz Meier <lorenz@px4.io>
+#
+# @board px4_fmu-v2 exclude
+# @board bitcraze_crazyflie exclude
+#
+
+. ${R}etc/init.d/rc.mc_defaults
+
+param set-default BAT1_N_CELLS 4
+
+param set-default MC_ROLL_P 7
+param set-default MC_ROLLRATE_P 0.13
+param set-default MC_ROLLRATE_I 0.05
+param set-default MC_ROLLRATE_D 0.004
+param set-default MC_PITCH_P 7
+param set-default MC_PITCHRATE_P 0.19
+param set-default MC_PITCHRATE_I 0.05
+param set-default MC_PITCHRATE_D 0.004
+param set-default MC_YAW_P 4
+
+set MIXER quad_w
@@ -0,0 +1,43 @@
+#!/bin/sh
+#
+# @name Team Blacksheep Discovery Endurance
+#
+# @type Quadrotor Wide
+# @class Copter
+#
+# @output MAIN1 motor 1
+# @output MAIN2 motor 2
+# @output MAIN3 motor 3
+# @output MAIN4 motor 4
+# @output MAIN5 feed-through of RC AUX1 channel
+# @output MAIN6 feed-through of RC AUX2 channel
+#
+# @output AUX1 feed-through of RC AUX1 channel
+# @output AUX2 feed-through of RC AUX2 channel
+# @output AUX3 feed-through of RC AUX3 channel
+# @output AUX4 feed-through of RC FLAPS channel
+#
+# @maintainer Simon Wilks <simon@uaventure.com>
+#
+# @board px4_fmu-v2 exclude
+# @board bitcraze_crazyflie exclude
+#
+
+. ${R}etc/init.d/rc.mc_defaults
+
+param set-default BAT1_N_CELLS 6
+param set-default BAT1_V_EMPTY 3.5
+
+param set-default MC_ROLL_P 7
+param set-default MC_ROLLRATE_P 0.08
+param set-default MC_ROLLRATE_I 0.02
+param set-default MC_PITCH_P 7
+param set-default MC_PITCHRATE_P 0.13
+param set-default MC_PITCHRATE_I 0.02
+param set-default MC_PITCHRATE_D 0.005
+
+param set-default MPC_XY_VEL_MAX 2
+
+param set-default PWM_MAIN_MIN 1080
+
+set MIXER quad_w
@@ -15,8 +15,6 @@ set MIXER quad_x

 param set SYS_HITL 1

-param set UAVCAN_ENABLE 0
-
 param set-default CA_ROTOR_COUNT 4
 param set-default CA_ROTOR0_PX 0.15
 param set-default CA_ROTOR0_PY 0.15
@@ -45,9 +45,11 @@ param set-default MPC_XY_VEL_I_ACC 4
 param set-default MPC_XY_VEL_P_ACC 3
 param set-default MPC_Z_VEL_P_ACC 12
 param set-default MPC_Z_VEL_I_ACC 3
+param set-default MPC_Z_VEL_MAX_DN 1.5

 param set-default NAV_ACC_RAD 5
 param set-default NAV_DLL_ACT 2
+param set-default NAV_LOITER_RAD 80

 param set-default RTL_DESCEND_ALT 10
 param set-default RTL_RETURN_ALT 30
@@ -93,8 +95,6 @@ param set-default HIL_ACT_FUNC8 203

 param set SYS_HITL 1

-param set UAVCAN_ENABLE 0
-
 # disable some checks to allow to fly
 # - with usb
 param set-default CBRK_USB_CHK 197848
@@ -0,0 +1,48 @@
+#!/bin/sh
+#
+# @name Steadidrone MAVRIK
+#
+# @type Octo Coax Wide
+# @class Copter
+#
+# @output MAIN1 motor 1
+# @output MAIN2 motor 2
+# @output MAIN3 motor 3
+# @output MAIN4 motor 4
+# @output MAIN5 motor 5
+# @output MAIN6 motor 6
+# @output MAIN7 motor 7
+# @output MAIN8 motor 8
+#
+# @maintainer Simon Wilks <simon@uaventure.com>
+#
+# @board px4_fmu-v2 exclude
+# @board bitcraze_crazyflie exclude
+#
+
+. ${R}etc/init.d/rc.mc_defaults
+
+
+param set-default MC_PITCH_P 4
+param set-default MC_PITCHRATE_P 0.24
+param set-default MC_PITCHRATE_I 0.09
+param set-default MC_PITCHRATE_D 0.013
+param set-default MC_PITCHRATE_MAX 180
+
+param set-default MC_ROLL_P 4
+param set-default MC_ROLLRATE_P 0.16
+param set-default MC_ROLLRATE_I 0.07
+param set-default MC_ROLLRATE_D 0.009
+param set-default MC_ROLLRATE_MAX 180
+
+param set-default MC_YAW_P 3
+
+param set-default MPC_HOLD_MAX_XY 0.25
+param set-default MPC_THR_MIN 0.15
+param set-default MPC_Z_VEL_MAX_DN 2
+
+param set-default BAT1_N_CELLS 4
+
+set MIXER octo_cox_w
+
+set PWM_OUT 12345678
@@ -1,10 +1,22 @@
 #!/bin/sh
 #
-# @name Generic Standard VTOL
+# @name Generic Quadplane VTOL
 #
 # @type Standard VTOL
 # @class VTOL
-
+#
+# @maintainer
+#
+# @output MAIN1 motor 1
+# @output MAIN2 motor 2
+# @output MAIN3 motor 3
+# @output MAIN4 motor 4
+# @output AUX1 Aileron 1
+# @output AUX2 Aileron 2
+# @output AUX3 Elevator
+# @output AUX4 Rudder
+# @output AUX5 Throttle
+#
 # @board px4_fmu-v2 exclude
 # @board bitcraze_crazyflie exclude
 # @board holybro_kakutef7 exclude
@@ -12,21 +24,21 @@

 . ${R}etc/init.d/rc.vtol_defaults

-param set-default SYS_CTRL_ALLOC 1
 param set-default CA_AIRFRAME 2
 param set-default CA_ROTOR_COUNT 5
-param set-default CA_ROTOR0_PX 1
-param set-default CA_ROTOR0_PY 1
-param set-default CA_ROTOR1_PX -1
-param set-default CA_ROTOR1_PY -1
-param set-default CA_ROTOR2_PX 1
-param set-default CA_ROTOR2_PY -1
+param set-default CA_ROTOR0_PX 0.15
+param set-default CA_ROTOR0_PY 0.15
+param set-default CA_ROTOR1_PX -0.15
+param set-default CA_ROTOR1_PY -0.15
+param set-default CA_ROTOR2_PX 0.15
+param set-default CA_ROTOR2_PY -0.15
 param set-default CA_ROTOR2_KM -0.05
-param set-default CA_ROTOR3_PX -1
-param set-default CA_ROTOR3_PY 1
+param set-default CA_ROTOR3_PX -0.15
+param set-default CA_ROTOR3_PY 0.15
 param set-default CA_ROTOR3_KM -0.05
 param set-default CA_ROTOR4_AX 1.0
 param set-default CA_ROTOR4_AZ 0.0
+param set-default CA_ROTOR4_PX 0.2
 param set-default CA_SV_CS_COUNT 4
 param set-default CA_SV_CS0_TYPE 1
 param set-default CA_SV_CS0_TRQ_R -0.5
@@ -36,5 +48,16 @@ param set-default CA_SV_CS2_TYPE 3
 param set-default CA_SV_CS2_TRQ_P 1.0
 param set-default CA_SV_CS3_TRQ_Y 1.0
 param set-default CA_SV_CS3_TYPE 4
+
+param set-default PWM_AUX_DIS5 950
+
 param set-default VT_TYPE 2
+param set-default VT_MOT_ID 1234
+param set-default VT_FW_MOT_OFFID 1234
+
 param set-default MAV_TYPE 22
+
+set MIXER quad_x
+set MIXER_AUX vtol_AAERT
+
+set PWM_OUT 1234
@@ -0,0 +1,43 @@
+#!/bin/sh
+#
+# @name Caipiroshka Duo Tailsitter
+#
+# @type VTOL Duo Tailsitter
+# @class VTOL
+#
+# @output MAIN1 motor right
+# @output MAIN2 motor left
+# @output MAIN5 elevon right
+# @output MAIN6 elevon left
+#
+# @maintainer Roman Bapst <roman@px4.io>
+#
+# @board px4_fmu-v2 exclude
+# @board bitcraze_crazyflie exclude
+# @board holybro_kakutef7 exclude
+#
+
+. ${R}etc/init.d/rc.vtol_defaults
+
+param set-default MAV_TYPE 19
+
+param set-default MC_ROLL_P 6
+param set-default MC_ROLLRATE_P 0.12
+param set-default MC_ROLLRATE_I 0.002
+
+param set-default MC_PITCH_P 4.5
+param set-default MC_PITCHRATE_P 0.3
+param set-default MC_PITCHRATE_I 0.002
+
+param set-default MC_YAW_P 3.8
+param set-default MC_YAWRATE_P 0.22
+param set-default MC_YAWRATE_I 0.02
+
+param set-default VT_IDLE_PWM_MC  1080
+param set-default VT_ELEV_MC_LOCK 0
+param set-default VT_MOT_ID 12
+param set-default VT_TYPE 0
+
+set MIXER vtol_tailsitter_duo
+
+set PWM_OUT 123456
@@ -0,0 +1,53 @@
+#!/bin/sh
+#
+# @name BirdsEyeView Aerobotics FireFly6
+# @type VTOL Tiltrotor
+# @class VTOL
+#
+# @maintainer Roman Bapst <roman@uaventure.com>
+#
+# @output MAIN1 Front right motor bottom
+# @output MAIN2 Front right motor top
+# @output MAIN3 Back motor bottom
+# @output MAIN4 Back motor top
+# @output MAIN5 Front left motor bottom
+# @output MAIN6 Front left motor top
+# @output AUX1 Tilt servo
+# @output AUX2 Elevon 1
+# @output AUX3 Elevon 2
+# @output AUX4 Gear
+#
+# @board px4_fmu-v2 exclude
+# @board bitcraze_crazyflie exclude
+#
+
+. ${R}etc/init.d/rc.vtol_defaults
+
+param set-default MAV_TYPE 21
+
+param set-default MC_ROLL_P 7
+param set-default MC_ROLLRATE_P 0.19
+param set-default MC_ROLLRATE_I 0.002
+param set-default MC_ROLLRATE_D 0.005
+param set-default MC_PITCH_P 7
+param set-default MC_PITCHRATE_P 0.14
+param set-default MC_PITCHRATE_I 0.002
+param set-default MC_PITCHRATE_D 0.004
+param set-default MC_YAW_P 4
+param set-default MC_YAWRATE_P 0.22
+param set-default MC_YAWRATE_I 0.02
+
+param set-default VT_FW_MOT_OFFID 34
+param set-default VT_IDLE_PWM_MC 1080
+param set-default VT_MOT_ID 123456
+param set-default VT_FW_MOT_OFFID 56
+param set-default VT_TILT_MC 0.08
+param set-default VT_TILT_TRANS 0.5
+param set-default VT_TILT_FW 0.9
+param set-default VT_ELEV_MC_LOCK 0
+param set-default VT_TYPE 1
+
+set MIXER firefly6
+set MIXER_AUX firefly6
+
+set PWM_OUT 12345678
@@ -7,8 +7,8 @@
 #
 # @output MAIN1 motor 1
 # @output MAIN2 motor 2
-# @output MAIN3 motor 3
-# @output MAIN4 motor 4
+# @output MAIN3 motor 4
+# @output MAIN4 motor 5
 # @output MAIN5 elevon left
 # @output MAIN6 elevon right
 # @output MAIN7 canard surface
@@ -43,7 +43,7 @@ param set-default MPC_YAWRAUTO_MAX 40
 param set-default FW_PR_I 0.02
 param set-default FW_RR_FF 0.6
 param set-default FW_RR_I 0.01
-param set-default FW_THR_TRIM 0.75
+param set-default FW_THR_CRUISE 0.75

 param set-default VT_ARSP_BLEND 6
 param set-default VT_ARSP_TRANS 12
@@ -0,0 +1,53 @@
+#!/bin/sh
+#
+# @name QuadRanger
+#
+# @type Standard VTOL
+# @class VTOL
+#
+# @maintainer Sander Smeets <sander@droneslab.com>
+#
+# @board px4_fmu-v2 exclude
+# @board bitcraze_crazyflie exclude
+#
+
+. ${R}etc/init.d/rc.vtol_defaults
+
+
+param set-default FW_THR_CRUISE 65
+param set-default FW_RR_FF 0.6
+
+param set-default MIS_YAW_TMT 10
+
+param set-default MC_ROLL_P 7
+param set-default MC_ROLLRATE_I 0.1
+param set-default MC_ROLLRATE_D 0.004
+param set-default MC_PITCH_P 7
+param set-default MC_PITCHRATE_I 0.1
+param set-default MC_PITCHRATE_D 0.004
+param set-default MC_YAW_P 3.5
+param set-default MC_YAWRATE_P 0.6
+param set-default MC_YAWRATE_I 0.04
+param set-default MC_YAWRATE_MAX 40
+
+param set-default MPC_ACC_HOR_MAX 2
+param set-default MPC_Z_VEL_MAX_DN 1.5
+param set-default MPC_LAND_SPEED 0.8
+param set-default MPC_YAWRAUTO_MAX 40
+
+param set-default PWM_AUX_DIS5 950
+param set-default PWM_AUX_REV1 1
+param set-default PWM_AUX_REV2 1
+
+param set-default VT_ARSP_TRANS 15
+param set-default VT_ARSP_BLEND 8
+param set-default VT_F_TRANS_THR 0.75
+param set-default VT_IDLE_PWM_MC 1080
+param set-default VT_MOT_ID 1234
+param set-default VT_FW_MOT_OFFID 1234
+param set-default VT_TYPE 2
+
+set MIXER quad_x
+set MIXER_AUX vtol_AAERT
+
+set PWM_OUT 1234
@@ -0,0 +1,83 @@
+#!/bin/sh
+#
+# @name Sparkle Tech Ranger VTOL
+#
+# @type Standard VTOL
+# @class VTOL
+#
+# @maintainer Andreas Antener <andreas@uaventure.com>
+#
+# @board px4_fmu-v2 exclude
+# @board bitcraze_crazyflie exclude
+# @board holybro_kakutef7 exclude
+#
+
+. ${R}etc/init.d/rc.vtol_defaults
+
+param set-default FW_AIRSPD_MAX   22
+param set-default FW_AIRSPD_MIN   14
+param set-default FW_AIRSPD_TRIM  16
+param set-default FW_L1_PERIOD    25
+param set-default FW_PR_P 0.060
+param set-default FW_P_RMAX_NEG   40
+param set-default FW_P_RMAX_POS   40
+param set-default FW_RR_FF    0.4
+param set-default FW_RR_P 0.04
+param set-default FW_R_RMAX   40
+
+param set-default MC_PITCHRATE_D 0.004
+param set-default MC_PITCHRATE_I 0
+param set-default MC_PITCHRATE_MAX 60
+param set-default MC_PITCHRATE_P 0.21
+param set-default MC_PITCH_P 4
+param set-default MC_ROLLRATE_D 0.004
+param set-default MC_ROLLRATE_I 0.002
+param set-default MC_ROLLRATE_MAX 60
+param set-default MC_ROLLRATE_P 0.24
+param set-default MC_ROLL_P 4
+param set-default MC_YAWRATE_I 0.02
+param set-default MC_YAWRATE_MAX 40
+param set-default MC_YAWRATE_P 0.18
+
+param set-default MIS_TAKEOFF_ALT 2.5
+param set-default MIS_YAW_TMT 20
+
+param set-default MPC_ACC_HOR_MAX 1
+param set-default MPC_HOLD_MAX_XY 0.5
+param set-default MPC_HOLD_MAX_Z  0.5
+param set-default MPC_LAND_SPEED  1
+param set-default MPC_MANTHR_MIN  0.05
+param set-default MPC_MAN_Y_MAX   120
+param set-default MPC_THR_MIN 0.07
+param set-default MPC_TILTMAX_AIR 35
+param set-default MPC_TILTMAX_LND 20
+param set-default MPC_TKO_SPEED   1
+param set-default MPC_XY_P    0.3
+param set-default MPC_XY_VEL_MAX  3
+param set-default MPC_XY_VEL_P_ACC 1
+param set-default MPC_Z_P 0.5
+param set-default MPC_Z_VEL_P_ACC 2
+param set-default MPC_YAWRAUTO_MAX 40
+
+param set-default NAV_ACC_RAD 3
+
+param set-default PWM_AUX_REV1    1
+param set-default PWM_AUX_REV2    1
+param set-default PWM_AUX_REV3    1
+param set-default PWM_AUX_REV4    1
+
+param set-default PWM_AUX_DIS5 950
+
+param set-default VT_ARSP_TRANS   15
+param set-default VT_F_TRANS_THR    0.6
+param set-default VT_IDLE_PWM_MC 1180
+param set-default VT_MOT_ID 1234
+param set-default VT_FW_MOT_OFFID 1234
+param set-default VT_TRANS_MIN_TM 5
+param set-default VT_TRANS_TIMEOUT    30
+param set-default VT_TYPE 2
+
+set MIXER quad_x
+set MIXER_AUX vtol_AAERT
+
+set PWM_OUT 1234
@@ -0,0 +1,37 @@
+#!/bin/sh
+#
+# @name CruiseAder Claire
+#
+# @type VTOL Tiltrotor
+# @class VTOL
+#
+# @maintainer Samay Siga <samay_s@icloud.com>
+#
+# @board px4_fmu-v2 exclude
+# @board bitcraze_crazyflie exclude
+#
+
+. ${R}etc/init.d/rc.vtol_defaults
+
+param set-defualt MAV_TYPE 21
+
+param set-default PWM_AUX_DISARM 1000
+param set-default PWM_AUX_MAX 2000
+param set-default PWM_AUX_MIN 1000
+param set-default PWM_AUX_RATE 50
+
+param set-default PWM_MAIN_MAX 2000
+
+param set-default VT_MOT_ID 1234
+param set-default VT_FW_MOT_OFFID 13
+param set-default VT_IDLE_PWM_MC 1080
+param set-default VT_TILT_FW 0.9
+param set-default VT_TILT_MC 0.08
+param set-default VT_TILT_TRANS 0.5
+param set-default VT_ELEV_MC_LOCK 0
+param set-default VT_TYPE 1
+
+set MIXER claire
+set MIXER_AUX claire
+
+set PWM_OUT 1234
@@ -22,7 +22,7 @@

 . ${R}etc/init.d/rc.vtol_defaults

-param set-default MAV_TYPE 21
+param set-defualt MAV_TYPE 21

 param set-default CBRK_AIRSPD_CHK 162128

@@ -34,6 +34,8 @@ param set-default FW_ACRO_X_MAX   270
 param set-default FW_ACRO_Y_MAX   270
 param set-default FW_ACRO_Z_MAX   180
 param set-default FW_PSP_OFF  5
+param set-default FW_P_LIM_MAX    30
+param set-default FW_P_LIM_MIN    -30
 param set-default FW_RR_FF    0.33
 param set-default FW_RR_P 0.11

@@ -67,9 +69,4 @@ param set-default VT_TYPE 1

 set MIXER vtol_convergence

-if ! ver hwcmp MATEK_H743
-then
-	set PWM_OUT 1234
-else
-	set PWM_OUT 3456
-fi
+set PWM_OUT 1234
@@ -53,8 +53,9 @@ param set-default FW_T_CLMB_MAX 3
 param set-default FW_T_SINK_MAX 3
 param set-default FW_T_SINK_MIN 1
 param set-default FW_T_VERT_ACC 6
-param set-default FW_THR_TRIM 0.70
+param set-default FW_THR_CRUISE 0.70
 param set-default FW_THR_SLEW_MAX 1
+param set-default FW_MAN_P_MAX 30
 param set-default FW_P_LIM_MAX 15
 param set-default FW_P_LIM_MIN -25
 param set-default FW_P_RMAX_NEG 45
@@ -89,6 +90,7 @@ param set-default MPC_ACC_HOR_MAX 2
 param set-default MPC_LAND_SPEED 1.2
 param set-default MPC_TILTMAX_LND 35
 param set-default MPC_Z_VEL_MAX_UP 1.5
+param set-default MPC_Z_VEL_MAX_DN 1.5
 param set-default MPC_HOLD_MAX_XY 0.5
 param set-default MPC_HOLD_MAX_Z 0.5
 param set-default MPC_TKO_RAMP_T 0.8
@@ -129,6 +131,7 @@ param set-default VT_F_TRANS_DUR 1
 param set-default VT_IDLE_PWM_MC 1025
 param set-default VT_B_REV_OUT 0.5
 param set-default VT_B_TRANS_THR 0.7
+param set-default VT_FW_PERM_STAB 1
 param set-default VT_TRANS_TIMEOUT 22
 param set-default VT_F_TRANS_RAMP 4

@@ -31,6 +31,7 @@ param set-default FW_AIRSPD_MAX 30
 param set-default FW_AIRSPD_MIN 19
 param set-default FW_AIRSPD_TRIM 23
 param set-default FW_L1_R_SLEW_MAX 40
+param set-default FW_MAN_P_MAX 30
 param set-default FW_PSP_OFF 3
 param set-default FW_P_LIM_MAX 18
 param set-default FW_P_LIM_MIN -25
@@ -38,7 +39,7 @@ param set-default FW_RLL_TO_YAW_FF 0.1
 param set-default FW_RR_P 0.08
 param set-default FW_R_LIM 45
 param set-default FW_R_RMAX 50
-param set-default FW_THR_TRIM 0.65
+param set-default FW_THR_CRUISE 0.65
 param set-default FW_THR_MIN 0.3
 param set-default FW_THR_SLEW_MAX 0.6
 param set-default FW_T_HRATE_FF 0
@@ -70,6 +71,7 @@ param set-default MPC_VEL_MANUAL 3
 param set-default MPC_XY_CRUISE 3
 param set-default MPC_XY_VEL_MAX 3.5
 param set-default MPC_YAWRAUTO_MAX 40
+param set-default MPC_Z_VEL_MAX_DN 1.5
 param set-default MPC_Z_VEL_MAX_UP 2

 param set-default NAV_ACC_RAD 3
@@ -1,44 +0,0 @@
-#!/bin/sh
-#
-# @name Generic Tiltrotor VTOL
-#
-# @type VTOL Tiltrotor
-# @class VTOL
-#
-# @board px4_fmu-v2 exclude
-# @board bitcraze_crazyflie exclude
-#
-
-. ${R}etc/init.d/rc.vtol_defaults
-
-param set-default SYS_CTRL_ALLOC 1
-
-param set-default CA_AIRFRAME 3
-param set-default CA_ROTOR_COUNT 4
-param set-default CA_ROTOR0_PX 1
-param set-default CA_ROTOR0_PY 1
-param set-default CA_ROTOR0_TILT 2
-param set-default CA_ROTOR1_PX -1
-param set-default CA_ROTOR1_PY -1
-param set-default CA_ROTOR2_PX 1
-param set-default CA_ROTOR2_PY -1
-param set-default CA_ROTOR2_TILT 1
-param set-default CA_ROTOR2_KM -0.05
-param set-default CA_ROTOR3_PX -1
-param set-default CA_ROTOR3_PY 1
-param set-default CA_ROTOR3_KM -0.05
-param set-default CA_SV_CS_COUNT 4
-param set-default CA_SV_CS0_TYPE 1
-param set-default CA_SV_CS0_TRQ_R -0.5
-param set-default CA_SV_CS1_TYPE 2
-param set-default CA_SV_CS1_TRQ_R 0.5
-param set-default CA_SV_CS2_TYPE 7
-param set-default CA_SV_CS2_TRQ_P 0.5
-param set-default CA_SV_CS2_TRQ_Y 0.5
-param set-default CA_SV_CS3_TYPE 8
-param set-default CA_SV_CS3_TRQ_P 0.5
-param set-default CA_SV_CS3_TRQ_Y -0.5
-param set-default CA_SV_TL_COUNT 2
-
-param set-default MAV_TYPE 21
-param set-default VT_TYPE 1
@@ -1,10 +1,17 @@
 #!/bin/sh
 #
-# @name Generic VTOL Tailsitter
+# @name Generic Tailsitter
 #
-# @type VTOL Tailsitter
+# @type VTOL Duo Tailsitter
 # @class VTOL
 #
+# @output MAIN1 motor right
+# @output MAIN2 motor left
+# @output MAIN5 elevon right
+# @output MAIN6 elevon left
+#
+# @maintainer Roman Bapst <roman@px4.io>
+#
 # @board px4_fmu-v2 exclude
 # @board bitcraze_crazyflie exclude
 # @board holybro_kakutef7 exclude
@@ -12,13 +19,18 @@

 . ${R}etc/init.d/rc.vtol_defaults

-param set-default SYS_CTRL_ALLOC 1
+param set-default MAV_TYPE 19
+
+param set-default VT_ELEV_MC_LOCK 0
+param set-default VT_MOT_COUNT 2
+param set-default VT_TYPE 0
+
 param set-default CA_AIRFRAME 4
 param set-default CA_ROTOR_COUNT 2
 param set-default CA_ROTOR0_KM -0.05
-param set-default CA_ROTOR0_PY -0.2
-param set-default CA_ROTOR1_KM 0.05
-param set-default CA_ROTOR1_PY 0.2
+param set-default CA_ROTOR0_PY 0.2
+param set-default CA_ROTOR1_KM -0.05
+param set-default CA_ROTOR1_PY -0.2
 param set-default CA_SV_CS_COUNT 2
 param set-default CA_SV_CS0_TRQ_P 0.5
 param set-default CA_SV_CS0_TRQ_Y 0.5
@@ -27,6 +39,6 @@ param set-default CA_SV_CS1_TRQ_P 0.5
 param set-default CA_SV_CS1_TRQ_Y -0.5
 param set-default CA_SV_CS1_TYPE 6

-param set-default MAV_TYPE 19
-param set-default VT_TYPE 0
-param set-default VT_ELEV_MC_LOCK 0
+set MIXER vtol_tailsitter_duo
+
+set PWM_OUT 1234
@@ -1,26 +1,54 @@
 #!/bin/sh
 #
-# @name Generic Helicopter (Tail ESC)
+# @name Blade 130X
 #
 # @type Helicopter
 # @class Copter
 #
+# @maintainer Bart Slinger <bartslinger@gmail.com>
+#
+# @output MAIN1 main motor
+# @output MAIN2 front swashplate servo
+# @output MAIN3 right swashplate servo
+# @output MAIN4 left swashplate servo
+# @output MAIN5 tail-rotor servo
+#
 # @board px4_fmu-v2 exclude
 # @board bitcraze_crazyflie exclude
 #

-. ${R}etc/init.d/rc.heli_defaults
+. ${R}etc/init.d/rc.mc_defaults

+# Configure as helicopter (number 4 defined in commander_helper.cpp)
+param set-default MAV_TYPE 4

-# Disable PID gains for initial setup. These should be enabled after setting the FF gain.
-# P is expected to be lower than FF.
+set MIXER blade130
+
+set PWM_OUT none
+
+param set-default ATT_BIAS_MAX 0
+
+param set-default CBRK_IO_SAFETY 22027
+
+param set-default MC_ROLL_P 5
 param set-default MC_ROLLRATE_P 0
 param set-default MC_ROLLRATE_I 0
 param set-default MC_ROLLRATE_D 0
-param set-default MC_ROLLRATE_FF 0.1
+param set-default MC_ROLLRATE_FF 0.15
 param set-default MC_PITCHRATE_P 0
 param set-default MC_PITCHRATE_I 0
 param set-default MC_PITCHRATE_D 0
-param set-default MC_PITCHRATE_FF 0.1
+param set-default MC_PITCHRATE_FF 0.15
+param set-default MC_YAW_P 3
+param set-default MC_YAWRATE_P 0.1
+param set-default MC_YAWRATE_I 0
+param set-default MC_ROLLRATE_MAX 720
+param set-default MC_PITCHRATE_MAX 720
+param set-default MC_YAWRATE_MAX 400
+param set-default MC_ACRO_R_MAX 360
+param set-default MC_ACRO_P_MAX 360

-param set-default CA_AIRFRAME 10
+param set-default MPC_THR_MIN 0.06
+param set-default MPC_MANTHR_MIN 0.06
+
+param set-default PWM_MAIN_MIN 1075
@@ -0,0 +1,51 @@
+#!/bin/sh
+#
+# @name ThunderFly Auto-G2
+#
+# @type Autogyro
+# @class Autogyro
+#
+# @output MAIN1 rotor_head_L
+# @output MAIN2 rotor_head_R
+# @output MAIN3 elevator
+# @output MAIN4 rudder
+# @output MAIN5 rudder (second, optional)
+# @output MAIN6 throttle
+# @output MAIN7 wheel
+#
+# @output AUX1 feed-through of RC AUX1 channel for prerotator (optional)
+# @output AUX2 feed-through of RC AUX2 channel for release device (optional)
+#
+# @url https://github.com/ThunderFly-aerospace/Auto-G2/
+# @maintainer ThunderFly s.r.o., Roman Dvorak <dvorakroman@thunderfly.cz>
+#
+# @board px4_fmu-v2 exclude
+# @board bitcraze_crazyflie exclude
+#
+
+. ${R}etc/init.d/rc.fw_defaults
+
+
+param set-default BAT1_CAPACITY 2500
+param set-default BAT1_N_CELLS 3
+
+param set-default PWM_AUX_RATE 50
+param set-default PWM_MAIN_RATE 50
+
+param set-default SENS_BOARD_ROT 8
+
+param set-default FW_AIRSPD_MAX 20
+param set-default FW_AIRSPD_MIN 7
+param set-default FW_AIRSPD_TRIM 13
+param set-default FW_THR_CRUISE 0.8
+
+param set-default FW_MAN_P_MAX 25
+param set-default FW_MAN_R_MAX 25
+param set-default FW_PR_I 0.02
+param set-default FW_R_LIM 40
+param set-default FW_P_LIM_MAX 25
+param set-default FW_P_LIM_MIN -5
+param set-default FW_P_RMAX_NEG 20
+
+set MIXER TF-AutoG2
+set MIXER_AUX pass
@@ -0,0 +1,46 @@
+#!/bin/sh
+#
+# @name ThunderFly TF-G2
+#
+# @type Autogyro
+# @class Autogyro
+#
+# @output MAIN2 rotor_head_L
+# @output MAIN3 rotor_head_R
+# @output MAIN4 rudder
+# @output MAIN5 throttle
+#
+#
+# @url https://github.com/ThunderFly-aerospace/TF-G2/
+# @maintainer ThunderFly s.r.o., Roman Dvorak <dvorakroman@thunderfly.cz>
+#
+# @board px4_fmu-v2 exclude
+# @board bitcraze_crazyflie exclude
+#
+
+. ${R}etc/init.d/rc.fw_defaults
+
+
+param set-default BAT1_CAPACITY 3300
+param set-default BAT1_N_CELLS 3
+
+param set-default PWM_AUX_RATE 50
+param set-default PWM_MAIN_RATE 50
+
+param set-default SENS_BOARD_ROT 4
+
+param set-default FW_AIRSPD_MAX 20
+param set-default FW_AIRSPD_MIN 7
+param set-default FW_AIRSPD_TRIM 13
+param set-default FW_THR_CRUISE 0.8
+
+param set-default FW_MAN_P_MAX 25
+param set-default FW_MAN_R_MAX 25
+param set-default FW_PR_I 0.02
+param set-default FW_R_LIM 40
+param set-default FW_P_LIM_MAX 25
+param set-default FW_P_LIM_MIN -5
+param set-default FW_P_RMAX_NEG 20
+
+set MIXER TF-G2
+set MIXER_AUX pass
@@ -1,16 +1,28 @@
 #!/bin/sh
 #
-# @name Generic Standard Plane
+# @name Standard Plane
 #
 # @type Standard Plane
 # @class Plane
 #
+# @output MAIN1 aileron
+# @output MAIN2 elevator
+# @output MAIN3 throttle
+# @output MAIN4 rudder
+# @output MAIN5 flaps
+# @output MAIN6 gear
+#
+# @output AUX1 feed-through of RC AUX1 channel
+# @output AUX2 feed-through of RC AUX2 channel
+# @output AUX3 feed-through of RC AUX3 channel
+#
+# @maintainer Lorenz Meier <lorenz@px4.io>
+#
 # @board bitcraze_crazyflie exclude
 #

 . ${R}etc/init.d/rc.fw_defaults

-param set-default SYS_CTRL_ALLOC 1
 param set-default CA_AIRFRAME 1
 param set-default CA_ROTOR_COUNT 1
 param set-default CA_ROTOR0_PX 0.3
@@ -22,3 +34,11 @@ param set-default CA_SV_CS2_TRQ_P 1.0
 param set-default CA_SV_CS2_TYPE 3
 param set-default CA_SV_CS3_TRQ_Y 1.0
 param set-default CA_SV_CS3_TYPE 4
+
+param set-default PWM_AUX_RATE 50
+param set-default PWM_MAIN_RATE 50
+
+set MIXER AETRFG
+
+# Rate must be set by group (see pwm info).
+# Throttle is in the same group as servos.
@@ -0,0 +1,45 @@
+#!/bin/sh
+#
+# @name Bormatec Maja
+#
+# @type Standard Plane
+# @class Plane
+#
+# @output MAIN1 aileron
+# @output MAIN2 aileron
+# @output MAIN3 elevator
+# @output MAIN4 rudder
+# @output MAIN5 throttle
+# @output MAIN6 wheel
+# @output MAIN7 flaps
+#
+# @output AUX1 feed-through of RC AUX1 channel
+# @output AUX2 feed-through of RC AUX2 channel
+# @output AUX3 feed-through of RC AUX3 channel
+#
+# @maintainer Andreas Antener <andreas@uaventure.com>
+#
+# @board px4_fmu-v2 exclude
+# @board bitcraze_crazyflie exclude
+#
+
+. ${R}etc/init.d/rc.fw_defaults
+
+param set-default FW_MAN_P_MAX 55
+param set-default FW_MAN_R_MAX 55
+param set-default FW_R_LIM 55
+
+param set-default FW_WR_FF 0.2
+param set-default FW_WR_I 0.2
+param set-default FW_WR_IMAX 0.8
+param set-default FW_WR_P 1
+param set-default FW_W_RMAX 0
+
+# set disarmed value for the ESC
+param set-default PWM_MAIN_DISARM 1000
+
+
+set MIXER AAERTWF
+
+# use PWM parameters for throttle channel
+set PWM_OUT 5
@@ -0,0 +1,48 @@
+#!/bin/sh
+#
+# @name X-UAV Mini Talon
+#
+# @type Plane V-Tail
+# @class Plane
+#
+# @output MAIN1 aileron right
+# @output MAIN2 aileron left
+# @output MAIN3 v-tail right
+# @output MAIN4 v-tail left
+# @output MAIN5 throttle
+# @output MAIN6 wheel
+# @output MAIN7 flaps right
+# @output MAIN8 flaps left
+#
+# @output AUX1 feed-through of RC AUX1 channel
+# @output AUX2 feed-through of RC AUX2 channel
+# @output AUX3 feed-through of RC AUX3 channel
+#
+# @maintainer Friedrich Beckmann <friedrich.beckmann@hs-augsburg.de>
+#
+# @board px4_fmu-v2 exclude
+# @board bitcraze_crazyflie exclude
+#
+
+. ${R}etc/init.d/rc.fw_defaults
+
+param set-default FW_MAN_P_MAX 55
+param set-default FW_MAN_R_MAX 55
+param set-default FW_R_LIM 55
+
+param set-default FW_WR_FF 0.2
+param set-default FW_WR_I 0.2
+param set-default FW_WR_IMAX 0.8
+param set-default FW_WR_P 1
+param set-default FW_W_RMAX 0
+
+# set disarmed value for the ESC
+param set-default PWM_MAIN_DISARM 1000
+
+# The Mini Talon does not have a wheel and
+# no flaps. I leave them here because the mixer
+# computes also wheel and flap controls.
+set MIXER AAVVTWFF_vtail
+
+# use PWM parameters for throttle channel
+set PWM_OUT 5
@@ -5,20 +5,19 @@
 # @type Flying Wing
 # @class Plane
 #
+# @output MAIN1 left aileron
+# @output MAIN2 right aileron
+# @output MAIN4 throttle
+#
+# @output AUX1 feed-through of RC AUX1 channel
+# @output AUX2 feed-through of RC AUX2 channel
+# @output AUX3 feed-through of RC AUX3 channel
+#
+# @maintainer
+#
 # @board bitcraze_crazyflie exclude
 #

 . ${R}etc/init.d/rc.fw_defaults

-param set-default SYS_CTRL_ALLOC 1
-param set-default CA_AIRFRAME 1
-
-param set-default CA_ROTOR_COUNT 1
-param set-default CA_ROTOR0_PX 0.15
-param set-default CA_SV_CS_COUNT 2
-param set-default CA_SV_CS0_TYPE 5
-param set-default CA_SV_CS0_TRQ_P 0.5
-param set-default CA_SV_CS0_TRQ_R -0.5
-param set-default CA_SV_CS1_TYPE 6
-param set-default CA_SV_CS1_TRQ_P 0.5
-param set-default CA_SV_CS1_TRQ_R 0.5
+set MIXER fw_generic_wing
@@ -0,0 +1,45 @@
+#!/bin/sh
+#
+# @name IO Camflyer
+#
+# @type Flying Wing
+# @class Plane
+#
+# @output MAIN1 left aileron
+# @output MAIN2 right aileron
+# @output MAIN4 throttle
+#
+# @output AUX1 feed-through of RC AUX1 channel
+# @output AUX2 feed-through of RC AUX2 channel
+# @output AUX3 feed-through of RC AUX3 channel
+#
+# @maintainer Simon Wilks <simon@uaventure.com>
+#
+# @board px4_fmu-v2 exclude
+# @board bitcraze_crazyflie exclude
+#
+
+. ${R}etc/init.d/rc.fw_defaults
+
+param set-default FW_AIRSPD_MAX 15
+param set-default FW_AIRSPD_TRIM 13
+param set-default FW_R_TC 0.3
+param set-default FW_P_TC 0.3
+param set-default FW_L1_DAMPING 0.74
+param set-default FW_L1_PERIOD 16
+param set-default FW_LND_ANG 15
+param set-default FW_LND_FLALT 5
+param set-default FW_LND_HVIRT 13
+param set-default FW_LND_TLALT 5
+param set-default FW_THR_LND_MAX 0
+param set-default FW_PR_FF 0.35
+param set-default FW_RR_FF 0.6
+param set-default FW_RR_P 0.04
+
+param set-default PWM_MAIN_DISARM 1000
+
+
+set MIXER fw_generic_wing
+
+# Provide ESC a constant 1000 us pulse while disarmed
+set PWM_OUT 4
@@ -0,0 +1,49 @@
+#!/bin/sh
+#
+# @name Phantom FPV Flying Wing
+#
+# @url https://docs.px4.io/master/en/frames_plane/wing_wing_z84.html
+#
+# @type Flying Wing
+# @class Plane
+#
+# @output MAIN1 left aileron
+# @output MAIN2 right aileron
+# @output MAIN4 throttle
+#
+# @output AUX1 feed-through of RC AUX1 channel
+# @output AUX2 feed-through of RC AUX2 channel
+# @output AUX3 feed-through of RC AUX3 channel
+#
+# @maintainer Simon Wilks <simon@uaventure.com>
+#
+# @board px4_fmu-v2 exclude
+# @board bitcraze_crazyflie exclude
+#
+
+. ${R}etc/init.d/rc.fw_defaults
+
+param set-default FW_AIRSPD_MIN 13
+param set-default FW_AIRSPD_MAX 25
+param set-default FW_R_TC 0.3
+param set-default FW_P_TC 0.3
+param set-default FW_L1_PERIOD 15
+param set-default FW_PR_FF 0.2
+param set-default FW_PR_IMAX 0.2
+param set-default FW_PR_P 0.03
+param set-default FW_P_LIM_MAX 50
+param set-default FW_P_LIM_MIN -50
+param set-default FW_RR_P 0.08
+param set-default FW_R_LIM 50
+param set-default FW_R_RMAX 50
+
+param set-default PWM_MAIN_DISARM 1000
+
+# Bottom of bay and nominal zero-pitch attitude differ
+# the payload bay is pitched up about 7 degrees
+param set-default SENS_BOARD_Y_OFF 7
+
+set MIXER fw_generic_wing
+
+# Provide ESC a constant 1000 us pulse
+set PWM_OUT 4
@@ -0,0 +1,40 @@
+#!/bin/sh
+#
+# @name Skywalker X5 Flying Wing
+#
+# @type Flying Wing
+# @class Plane
+#
+# @output MAIN1 left aileron
+# @output MAIN2 right aileron
+# @output MAIN4 throttle
+#
+# @output AUX1 feed-through of RC AUX1 channel
+# @output AUX2 feed-through of RC AUX2 channel
+# @output AUX3 feed-through of RC AUX3 channel
+#
+# @maintainer Julian Oes <julian@px4.io>
+#
+# @board px4_fmu-v2 exclude
+# @board bitcraze_crazyflie exclude
+#
+
+. ${R}etc/init.d/rc.fw_defaults
+
+param set-default FW_AIRSPD_MIN 15
+param set-default FW_AIRSPD_TRIM 20
+param set-default FW_AIRSPD_MAX 40
+param set-default FW_R_TC 0.3
+param set-default FW_P_TC 0.3
+param set-default FW_L1_DAMPING 0.74
+param set-default FW_L1_PERIOD 16
+param set-default FW_LND_ANG 15
+param set-default FW_LND_FLALT 5
+param set-default FW_LND_HVIRT 13
+param set-default FW_LND_TLALT 5
+param set-default FW_THR_LND_MAX 0
+param set-default FW_PR_FF 0.35
+param set-default FW_RR_FF 0.6
+param set-default FW_RR_P 0.04
+
+set MIXER fw_generic_wing
@@ -0,0 +1,48 @@
+#!/bin/sh
+#
+# @name Wing Wing (aka Z-84) Flying Wing
+#
+# @url https://docs.px4.io/master/en/frames_plane/wing_wing_z84.html
+#
+# @type Flying Wing
+# @class Plane
+#
+# @output MAIN1 left aileron
+# @output MAIN2 right aileron
+# @output MAIN4 throttle
+#
+# @output AUX1 feed-through of RC AUX1 channel
+# @output AUX2 feed-through of RC AUX2 channel
+# @output AUX3 feed-through of RC AUX3 channel
+#
+# @maintainer Lorenz Meier <lorenz@px4.io>
+#
+# @board px4_fmu-v2 exclude
+# @board bitcraze_crazyflie exclude
+#
+
+. ${R}etc/init.d/rc.fw_defaults
+
+param set-default BAT1_N_CELLS 2
+param set-default FW_AIRSPD_MAX 15
+param set-default FW_AIRSPD_TRIM 13
+param set-default FW_R_TC 0.3
+param set-default FW_P_TC 0.3
+param set-default FW_L1_DAMPING 0.74
+param set-default FW_L1_PERIOD 16
+param set-default FW_LND_ANG 15
+param set-default FW_LND_FLALT 5
+param set-default FW_LND_HVIRT 13
+param set-default FW_LND_TLALT 5
+param set-default FW_THR_LND_MAX 0
+param set-default FW_PR_FF 0.35
+param set-default FW_RR_FF 0.6
+param set-default FW_RR_P 0.04
+
+param set-default PWM_MAIN_DISARM 1000
+
+# Set mixer.
+set MIXER fw_generic_wing
+
+# Provide ESC a constant 1000 us pulse.
+set PWM_OUT 4
@@ -0,0 +1,29 @@
+#!/bin/sh
+#
+# @name FX-79 Buffalo Flying Wing
+#
+# @type Flying Wing
+# @class Plane
+#
+# @output MAIN1 right aileron
+# @output MAIN2 left aileron
+# @output MAIN4 throttle
+#
+# @output AUX1 feed-through of RC AUX1 channel
+# @output AUX2 feed-through of RC AUX2 channel
+# @output AUX3 feed-through of RC AUX3 channel
+#
+# @maintainer Simon Wilks <simon@uaventure.com>
+#
+# @board px4_fmu-v2 exclude
+# @board bitcraze_crazyflie exclude
+#
+
+. ${R}etc/init.d/rc.fw_defaults
+
+param set-default FW_AIRSPD_MAX 30
+param set-default FW_AIRSPD_MIN 13
+
+param set-default NAV_LOITER_RAD 150
+
+set MIXER fw_generic_wing
@@ -0,0 +1,23 @@
+#!/bin/sh
+#
+# @name Viper
+#
+# @type Flying Wing
+# @class Plane
+# @output MAIN1 left aileron
+# @output MAIN2 right aileron
+# @output MAIN4 throttle
+#
+# @output AUX1 feed-through of RC AUX1 channel
+# @output AUX2 feed-through of RC AUX2 channel
+# @output AUX3 feed-through of RC AUX3 channel
+#
+# @maintainer Simon Wilks <simon@uaventure.com>
+#
+# @board px4_fmu-v2 exclude
+# @board bitcraze_crazyflie exclude
+#
+
+. ${R}etc/init.d/rc.fw_defaults
+
+set MIXER Viper
@@ -0,0 +1,49 @@
+#!/bin/sh
+#
+# @name Sparkle Tech Pigeon
+#
+# @url http://www.sparkletech.hk/
+#
+# @type Flying Wing
+# @class Plane
+#
+# @output MAIN1 left aileron
+# @output MAIN2 right aileron
+# @output MAIN4 throttle
+#
+# @output AUX1 feed-through of RC AUX1 channel
+# @output AUX2 feed-through of RC AUX2 channel
+# @output AUX3 feed-through of RC AUX3 channel
+#
+# @maintainer Simon Wilks <simon@uaventure.com>
+#
+# @board px4_fmu-v2 exclude
+# @board bitcraze_crazyflie exclude
+#
+
+. ${R}etc/init.d/rc.fw_defaults
+
+param set-default FW_AIRSPD_MIN 15
+param set-default FW_AIRSPD_TRIM 20
+param set-default FW_AIRSPD_MAX 27
+param set-default FW_ATT_TC 0.3
+param set-default FW_PR_FF 0.35
+param set-default FW_PR_IMAX 0.2
+param set-default FW_PR_P 0.05
+param set-default FW_P_TC 0.3
+param set-default FW_RR_FF 0.3
+param set-default FW_RR_P 0.03
+param set-default FW_R_LIM 40
+param set-default FW_R_RMAX 50
+param set-default FW_R_TC 0.3
+
+param set-default PWM_MAIN_DISARM 1000
+
+# Bottom of bay and nominal zero-pitch attitude differ
+# the payload bay is pitched up about 7 degrees
+param set-default SENS_BOARD_Y_OFF 11.9
+
+set MIXER fw_generic_wing
+
+# Provide ESC a constant 1000 us pulse
+set PWM_OUT 4
@@ -0,0 +1,53 @@
+#!/bin/sh
+#
+# @name Modified Parrot Disco
+#
+# @url
+#
+# @type Flying Wing
+# @class Plane
+#
+# @output MAIN1 left aileron
+# @output MAIN2 right aileron
+# @output MAIN4 throttle
+#
+# @output AUX1 feed-through of RC AUX1 channel
+# @output AUX2 feed-through of RC AUX2 channel
+# @output AUX3 feed-through of RC AUX3 channel
+#
+# @maintainer Jan Liphardt <JTLiphardt@gmail.com>
+#
+# @board px4_fmu-v2 exclude
+# @board bitcraze_crazyflie exclude
+#
+
+. ${R}etc/init.d/rc.fw_defaults
+
+####################################
+# Airspeed
+####################################
+param set-default FW_AIRSPD_MAX  27 # = 52 knots
+
+####################################
+# Pitch
+####################################
+
+# Pitch rate feed forward (def = 0.5 %/rad/sec)
+param set-default FW_PR_FF 0.35
+
+####################################
+# Roll
+####################################
+
+# Basic limits (def = 50 deg)
+param set-default FW_R_LIM 40
+
+# Roll rate upper limit (def = 70 deg/s)
+param set-default FW_R_RMAX 50
+
+param set-default PWM_MAIN_DISARM 1000
+
+set MIXER fw_generic_wing.main.mix
+
+# Provide ESC a constant 1000 us pulse
+set PWM_OUT 4
--- a/Show More
+++ b/Show More