WIP: microdds_start if installed

.ci/Jenkinsfile-hardware

@@ -794,7 +794,7 @@ void resetParameters() {
 void runTests() {
 
   // test loading a range of airframes
-  sh './Tools/HIL/test_airframes.sh `find /dev/serial -name *usb-*` 2100 3000 4001 6001 8001'
+  sh './Tools/HIL/test_airframes.sh `find /dev/serial -name *usb-*` 2100 3000 4001 6001 8001 10016'
 
   resetParameters()
 

.github/workflows/sitl_tests.yml

@@ -81,7 +81,7 @@ jobs:
       env:
         PX4_CMAKE_BUILD_TYPE: ${{matrix.config.build_type}}
         DONT_RUN: 1
-      run: make px4_sitl_default sitl_gazebo mavsdk_tests
+      run: make px4_sitl_default gazebo mavsdk_tests
     - name: ccache post-run mavsdk_tests
       run: ccache -s
 

.gitmodules

@@ -6,12 +6,12 @@
 	path = src/drivers/uavcan/libuavcan
 	url = https://github.com/dronecan/libuavcan.git
 	branch = main
-[submodule "Tools/simulation/jmavsim/jMAVSim"]
-	path = Tools/simulation/jmavsim/jMAVSim
+[submodule "Tools/jMAVSim"]
+	path = Tools/jMAVSim
 	url = https://github.com/PX4/jMAVSim.git
 	branch = master
-[submodule "Tools/simulation/gazebo/sitl_gazebo"]
-	path = Tools/simulation/gazebo/sitl_gazebo
+[submodule "Tools/sitl_gazebo"]
+	path = Tools/sitl_gazebo
 	url = https://github.com/PX4/PX4-SITL_gazebo.git
 	branch = master
 [submodule "src/drivers/gps/devices"]
@@ -31,10 +31,10 @@
 	url = https://github.com/PX4/NuttX-apps.git
 	branch = px4_firmware_nuttx-10.1.0+
 [submodule "Tools/flightgear_bridge"]
-	path = Tools/simulation/flightgear/flightgear_bridge
+	path = Tools/flightgear_bridge
 	url = https://github.com/PX4/PX4-FlightGear-Bridge.git
-[submodule "Tools/simulation/jsbsim/jsbsim_bridge"]
-	path = Tools/simulation/jsbsim/jsbsim_bridge
+[submodule "Tools/jsbsim_bridge"]
+	path = Tools/jsbsim_bridge
 	url = https://github.com/PX4/px4-jsbsim-bridge.git
 [submodule "src/drivers/cyphal/libcanard"]
 	path = src/drivers/cyphal/libcanard
@@ -53,6 +53,9 @@
 [submodule "src/lib/events/libevents"]
 	path = src/lib/events/libevents
 	url = https://github.com/mavlink/libevents.git
+[submodule "Tools/simulation-ignition"]
+	path = Tools/simulation-ignition
+	url = https://github.com/PX4/px4-simulation-ignition.git
 [submodule "src/lib/crypto/libtomcrypt"]
 	path = src/lib/crypto/libtomcrypt
 	url = https://github.com/PX4/libtomcrypt.git

.vscode/cmake-variants.yaml

@@ -2,15 +2,10 @@ CONFIG:
   default: px4_sitl_default
   choices:
     px4_sitl_default:
-      short: px4_sitl_default
+      short: px4_sitl
       buildType: RelWithDebInfo
       settings:
         CONFIG: px4_sitl_default
-    px4_sitl_ign:
-      short: px4_sitl_ign
-      buildType: RelWithDebInfo
-      settings:
-        CONFIG: px4_sitl_ign
     px4_sitl_rtps:
       short: px4_sitl_rtps
       buildType: RelWithDebInfo

.vscode/tasks.json

@@ -49,6 +49,61 @@
                 "group": "test"
             }
         },
+        {
+            "label": "jmavsim build",
+            "type": "shell",
+            "command": "ant create_run_jar copy_res",
+            "options": {
+                "cwd": "${workspaceFolder}/Tools/jMAVSim"
+            },
+            "problemMatcher": [],
+            "presentation":{
+                "echo": true,
+                "reveal": "never",
+                "focus": false,
+                "panel": "shared",
+                "showReuseMessage": false,
+                "clear": false,
+            }
+        },
+        {
+            "label": "jmavsim",
+            "type": "shell",
+            "dependsOn": "jmavsim build",
+            "command": "java -Djava.ext.dirs= -jar jmavsim_run.jar -r 250 -lockstep -tcp localhost:4560 -qgc",
+            "options": {
+                "cwd": "${workspaceFolder}/Tools/jMAVSim/out/production",
+                "env": {
+                    "PX4_SIM_SPEED_FACTOR": "1"
+                }
+            },
+            "isBackground": true,
+            "presentation": {
+                "echo": true,
+                "reveal": "never",
+                "focus": false,
+                "panel": "shared",
+                "showReuseMessage": false,
+                "clear": false
+            },
+            "problemMatcher": [
+                {
+                    "pattern": [
+                        {
+                            "regexp": ".",
+                            "file": 1,
+                            "location": 2,
+                            "message": 3
+                        }
+                    ],
+                    "background": {
+                        "activeOnStart": true,
+                        "beginsPattern": ".",
+                        "endsPattern": ".",
+                    }
+                }
+            ]
+        },
         {
             "label": "jmavsim kill",
             "type": "shell",
@@ -61,8 +116,7 @@
                 "showReuseMessage": false,
                 "clear": false
             },
-            "problemMatcher": [],
-            "dependsOn":["px4_sitl_cleanup"]
+            "problemMatcher": []
         },
         {
             "label": "gazebo build",
@@ -89,11 +143,11 @@
                 "cwd": "${workspaceFolder}",
                 "env": {
                     "GAZEBO_PLUGIN_PATH": "${workspaceFolder}/build/px4_sitl_default/build_gazebo",
-                    "GAZEBO_MODEL_PATH": "${workspaceFolder}/Tools/simulation/gazebo/sitl_gazebo/models",
+                    "GAZEBO_MODEL_PATH": "${workspaceFolder}/Tools/sitl_gazebo/models",
                     "PX4_SIM_SPEED_FACTOR": "1"
                 }
             },
-            "command": "gzserver --verbose ${workspaceFolder}/Tools/simulation/gazebo/sitl_gazebo/worlds/${input:gazeboWorld}.world",
+            "command": "gzserver --verbose ${workspaceFolder}/Tools/sitl_gazebo/worlds/${input:gazeboWorld}.world",
             "isBackground": true,
             "presentation": {
                 "echo": true,
@@ -129,11 +183,11 @@
                 "cwd": "${workspaceFolder}",
                 "env": {
                     "GAZEBO_PLUGIN_PATH": "${workspaceFolder}/build/px4_sitl_default/build_gazebo",
-                    "GAZEBO_MODEL_PATH": "${workspaceFolder}/Tools/simulation/gazebo/sitl_gazebo/models",
+                    "GAZEBO_MODEL_PATH": "${workspaceFolder}/Tools/sitl_gazebo/models",
                     "PX4_SIM_SPEED_FACTOR": "1"
                 }
             },
-            "command": "gz model --verbose --spawn-file=${workspaceFolder}/Tools/simulation/gazebo/sitl_gazebo/models/${input:gazeboModel}/${input:gazeboModel}.sdf --model-name=${input:gazeboModel} -x 1.01 -y 0.98 -z 0.83",
+            "command": "gz model --verbose --spawn-file=${workspaceFolder}/Tools/sitl_gazebo/models/${input:vehicleModel}/${input:vehicleModel}.sdf --model-name=${input:vehicleModel} -x 1.01 -y 0.98 -z 0.83",
             "isBackground": false,
             "presentation": {
                 "echo": true,
@@ -162,26 +216,26 @@
             ]
         },
         {
-            "label": "ign gazebo",
+            "label": "gazebo client",
             "type": "shell",
+            "dependsOn": "gazebo build",
             "options": {
                 "cwd": "${workspaceFolder}",
                 "env": {
-                    "IGN_GAZEBO_RESOURCE_PATH": "${workspaceFolder}/Tools/simulation/ignition/models",
+                    "GAZEBO_PLUGIN_PATH": "${workspaceFolder}/build/px4_sitl_default/build_gazebo",
+                    "GAZEBO_MODEL_PATH": "${workspaceFolder}/Tools/sitl_gazebo/models",
                     "PX4_SIM_SPEED_FACTOR": "1"
                 }
             },
-            "command": "ign gazebo -v 4 -r ${workspaceFolder}/Tools/simulation/ignition/worlds/${input:ignWorld}.sdf",
+            "command": "gzclient --verbose",
             "isBackground": true,
             "presentation": {
                 "echo": true,
                 "reveal": "never",
-                "revealProblems": "onProblem",
                 "focus": false,
-                "panel": "dedicated",
+                "panel": "shared",
                 "showReuseMessage": false,
-                "clear": false,
-                "close": true
+                "clear": false
             },
             "problemMatcher": [
                 {
@@ -204,51 +258,29 @@
         {
             "label": "gazebo kill",
             "type": "shell",
-            "command": "pkill -9 -f gzserver || true",
+            "command": "killall gzserver",
             "presentation": {
                 "echo": true,
-                "reveal": "never",
-                "revealProblems": "onProblem",
+                "reveal": "silent",
                 "focus": false,
-                "panel": "dedicated",
+                "panel": "shared",
                 "showReuseMessage": false,
-                "clear": false,
-                "close": true
+                "clear": false
             },
             "problemMatcher": [],
             "dependsOn":["px4_sitl_cleanup"]
         },
-        {
-            "label": "ign gazebo kill",
-            "type": "shell",
-            "command": "pkill -9 -f ign || true",
-            "presentation": {
-                "echo": true,
-                "reveal": "never",
-                "revealProblems": "onProblem",
-                "focus": false,
-                "panel": "dedicated",
-                "showReuseMessage": false,
-                "clear": false,
-                "close": true
-            },
-            "problemMatcher": [],
-            "dependsOn":["px4_sitl_cleanup"]
-        },
-
         {
             "label": "px4_sitl_cleanup",
             "type": "shell",
-            "command": "rm -rfv /tmp/px4* || true",
+            "command": "rm -rfv /tmp/px4*",
             "presentation": {
                 "echo": true,
-                "reveal": "never",
-                "revealProblems": "onProblem",
+                "reveal": "silent",
                 "focus": false,
-                "panel": "dedicated",
+                "panel": "shared",
                 "showReuseMessage": false,
-                "clear": false,
-                "close": true
+                "clear": false
             },
             "problemMatcher": [],
             "dependsOn":["px4_kill"]
@@ -256,16 +288,14 @@
         {
             "label": "px4_kill",
             "type": "shell",
-            "command": "pkill -9 px4 || true",
+            "command": "killall px4 || true",
             "presentation": {
                 "echo": true,
-                "reveal": "never",
-                "revealProblems": "onProblem",
+                "reveal": "silent",
                 "focus": false,
-                "panel": "dedicated",
+                "panel": "shared",
                 "showReuseMessage": false,
-                "clear": false,
-                "close": true
+                "clear": false
             },
             "problemMatcher": []
         },
@@ -307,16 +337,7 @@
     "inputs": [
         {
             "type": "pickString",
-            "id": "ignWorld",
-            "description": "Ignition world",
-            "options": [
-                "default"
-            ],
-            "default": "default"
-        },
-        {
-            "type": "pickString",
-            "id": "gazeboModel",
+            "id": "vehicleModel",
             "description": "gazebo model",
             "options": [
               "iris",

CMakeLists.txt

@@ -296,10 +296,7 @@ if(${PX4_PLATFORM} STREQUAL "posix")
 	set(CMAKE_POSITION_INDEPENDENT_CODE ON)
 	set(CMAKE_ENABLE_EXPORTS ON)
 
-	if(CMAKE_BUILD_TYPE MATCHES "Coverage")
-		include(coverage)
-	endif()
-
+	include(coverage)
 	include(sanitizers)
 
 	# Define GNU standard installation directories

Jenkinsfile

@@ -26,15 +26,15 @@ pipeline {
         //       echo $0;
         //       mkdir -p catkin_ws/src;
         //       cd catkin_ws;
-        //       git -C ${WORKSPACE}/catkin_ws/src/Firmware submodule update --init --recursive --force Tools/simulation/gazebo/sitl_gazebo
-        //       git clone --recursive ${WORKSPACE}/catkin_ws/src/Firmware/Tools/simulation/gazebo/sitl_gazebo src/mavlink_sitl_gazebo;
+        //       git -C ${WORKSPACE}/catkin_ws/src/Firmware submodule update --init --recursive --force Tools/sitl_gazebo
+        //       git clone --recursive ${WORKSPACE}/catkin_ws/src/Firmware/Tools/sitl_gazebo src/mavlink_sitl_gazebo;
         //       git -C ${WORKSPACE}/catkin_ws/src/Firmware fetch --tags;
         //       source /opt/ros/melodic/setup.bash;
         //       export PYTHONPATH=/opt/ros/$ROS_DISTRO/lib/python2.7/dist-packages:/usr/lib/python2.7/dist-packages:/usr/local/lib/python2.7/dist-packages;
         //       catkin init;
         //       catkin build -j$(nproc) -l$(nproc);
         //     '''
-        //     // test if the binary was correctly installed and runs using 'mavros_posix_sitl.launch'
+        //     // test if the binary was correctly installed and runs using 'mavros_posix_silt.launch'
         //     sh '''#!/bin/bash -l
         //       echo $0;
         //       source catkin_ws/devel/setup.bash;
@@ -68,7 +68,7 @@ pipeline {
               unset ROS_DISTRO;
               mkdir -p colcon_ws/src;
               cd colcon_ws;
-              git -C ${WORKSPACE}/colcon_ws/src/Firmware submodule update --init --recursive --force Tools/simulation/gazebo/sitl_gazebo;
+              git -C ${WORKSPACE}/colcon_ws/src/Firmware submodule update --init --recursive --force Tools/sitl_gazebo;
               git -C ${WORKSPACE}/colcon_ws/src/Firmware fetch --tags;
               source /opt/ros/foxy/setup.sh;
               colcon build --event-handlers console_direct+ --symlink-install;

Makefile

@@ -129,59 +129,57 @@ else
 	BUILD_DIR_SUFFIX :=
 endif
 
-CMAKE_ARGS ?=
-
 # additional config parameters passed to cmake
 ifdef EXTERNAL_MODULES_LOCATION
-	override CMAKE_ARGS += -DEXTERNAL_MODULES_LOCATION:STRING=$(EXTERNAL_MODULES_LOCATION)
+	CMAKE_ARGS += -DEXTERNAL_MODULES_LOCATION:STRING=$(EXTERNAL_MODULES_LOCATION)
 endif
 
 ifdef PX4_CMAKE_BUILD_TYPE
-	override CMAKE_ARGS += -DCMAKE_BUILD_TYPE=${PX4_CMAKE_BUILD_TYPE}
+	CMAKE_ARGS += -DCMAKE_BUILD_TYPE=${PX4_CMAKE_BUILD_TYPE}
 else
 
 	# Address Sanitizer
 	ifdef PX4_ASAN
-		override CMAKE_ARGS += -DCMAKE_BUILD_TYPE=AddressSanitizer
+		CMAKE_ARGS += -DCMAKE_BUILD_TYPE=AddressSanitizer
 	endif
 
 	# Memory Sanitizer
 	ifdef PX4_MSAN
-		override CMAKE_ARGS += -DCMAKE_BUILD_TYPE=MemorySanitizer
+		CMAKE_ARGS += -DCMAKE_BUILD_TYPE=MemorySanitizer
 	endif
 
 	# Thread Sanitizer
 	ifdef PX4_TSAN
-		override CMAKE_ARGS += -DCMAKE_BUILD_TYPE=ThreadSanitizer
+		CMAKE_ARGS += -DCMAKE_BUILD_TYPE=ThreadSanitizer
 	endif
 
 	# Undefined Behavior Sanitizer
 	ifdef PX4_UBSAN
-		override CMAKE_ARGS += -DCMAKE_BUILD_TYPE=UndefinedBehaviorSanitizer
+		CMAKE_ARGS += -DCMAKE_BUILD_TYPE=UndefinedBehaviorSanitizer
 	endif
 
 	# Fuzz Testing
 	ifdef PX4_FUZZ
-		override CMAKE_ARGS += -DCMAKE_BUILD_TYPE=FuzzTesting
+		CMAKE_ARGS += -DCMAKE_BUILD_TYPE=FuzzTesting
 	endif
 
 endif
 
 # Pick up specific Python path if set
 ifdef PYTHON_EXECUTABLE
-	override CMAKE_ARGS += -DPYTHON_EXECUTABLE=${PYTHON_EXECUTABLE}
+	CMAKE_ARGS += -DPYTHON_EXECUTABLE=${PYTHON_EXECUTABLE}
 endif
 
 # Check if the microRTPS agent is to be built
 ifdef BUILD_MICRORTPS_AGENT
-  override CMAKE_ARGS += -DBUILD_MICRORTPS_AGENT=ON
+  CMAKE_ARGS += -DBUILD_MICRORTPS_AGENT=ON
 endif
 
 # Functions
 # --------------------------------------------------------------------
 # describe how to build a cmake config
 define cmake-build
-	$(eval override CMAKE_ARGS += -DCONFIG=$(1))
+	$(eval CMAKE_ARGS += -DCONFIG=$(1))
 	@$(eval BUILD_DIR = "$(SRC_DIR)/build/$(1)")
 	@# check if the desired cmake configuration matches the cache then CMAKE_CACHE_CHECK stays empty
 	@$(call cmake-cache-check)
@@ -316,9 +314,7 @@ uorb_graphs:
 	@$(MAKE) --no-print-directory px4_fmu-v5_default uorb_graph
 	@$(MAKE) --no-print-directory px4_sitl_default uorb_graph
 
-px4io_update:
-	@$(MAKE) --no-print-directory px4_io-v2_default
-	@$(MAKE) --no-print-directory cubepilot_io-v2_default
+px4io_update: px4_io-v2_default cubepilot_io-v2_default
 	# px4_io-v2_default
 	cp build/px4_io-v2_default/px4_io-v2_default.bin boards/holybro/durandal-v1/extras/px4_io-v2_default.bin
 	cp build/px4_io-v2_default/px4_io-v2_default.bin boards/holybro/pix32v5/extras/px4_io-v2_default.bin
@@ -385,7 +381,7 @@ format:
 .PHONY: rostest python_coverage
 
 tests:
-	$(eval override CMAKE_ARGS += -DTESTFILTER=$(TESTFILTER))
+	$(eval CMAKE_ARGS += -DTESTFILTER=$(TESTFILTER))
 	$(eval ARGS += test_results)
 	$(eval ASAN_OPTIONS += color=always:check_initialization_order=1:detect_stack_use_after_return=1)
 	$(eval UBSAN_OPTIONS += color=always)

ROMFS/px4fmu_common/init.d-posix/airframes/10017_jmavsim_iris

@@ -1,34 +0,0 @@
-#!/bin/sh
-#
-# @name 3DR Iris Quadrotor SITL
-#
-# @type Quadrotor Wide
-#
-# @maintainer Julian Oes <julian@oes.ch>
-#
-
-. ${R}etc/init.d/rc.mc_defaults
-
-PX4_SIMULATOR=${PX4_SIMULATOR:=jmavsim}
-
-param set-default CA_AIRFRAME 0
-
-param set-default CA_ROTOR_COUNT 4
-param set-default CA_ROTOR0_PX 0.1515
-param set-default CA_ROTOR0_PY 0.245
-param set-default CA_ROTOR0_KM 0.05
-param set-default CA_ROTOR1_PX -0.1515
-param set-default CA_ROTOR1_PY -0.1875
-param set-default CA_ROTOR1_KM 0.05
-param set-default CA_ROTOR2_PX 0.1515
-param set-default CA_ROTOR2_PY -0.245
-param set-default CA_ROTOR2_KM -0.05
-param set-default CA_ROTOR3_PX -0.1515
-param set-default CA_ROTOR3_PY 0.1875
-param set-default CA_ROTOR3_KM -0.05
-
-param set-default PWM_MAIN_FUNC1 101
-param set-default PWM_MAIN_FUNC2 102
-param set-default PWM_MAIN_FUNC3 103
-param set-default PWM_MAIN_FUNC4 104
-

ROMFS/px4fmu_common/init.d-posix/airframes/10018_gazebo_iris_foggy_lidar

@@ -1,33 +0,0 @@
-#!/bin/sh
-#
-# @name 3DR Iris Quadrotor SITL (foggy_lidar)
-#
-# @type Quadrotor Wide
-#
-
-. ${R}etc/init.d/rc.mc_defaults
-
-
-param set-default CA_AIRFRAME 0
-
-param set-default CA_ROTOR_COUNT 4
-param set-default CA_ROTOR0_PX 0.1515
-param set-default CA_ROTOR0_PY 0.245
-param set-default CA_ROTOR0_KM 0.05
-param set-default CA_ROTOR1_PX -0.1515
-param set-default CA_ROTOR1_PY -0.1875
-param set-default CA_ROTOR1_KM 0.05
-param set-default CA_ROTOR2_PX 0.1515
-param set-default CA_ROTOR2_PY -0.245
-param set-default CA_ROTOR2_KM -0.05
-param set-default CA_ROTOR3_PX -0.1515
-param set-default CA_ROTOR3_PY 0.1875
-param set-default CA_ROTOR3_KM -0.05
-
-param set-default PWM_MAIN_FUNC1 101
-param set-default PWM_MAIN_FUNC2 102
-param set-default PWM_MAIN_FUNC3 103
-param set-default PWM_MAIN_FUNC4 104
-
-param set-default EKF2_RNG_A_HMAX 10
-

ROMFS/px4fmu_common/init.d-posix/airframes/10018_iris_foggy_lidar

@@ -0,0 +1,11 @@
+#!/bin/sh
+#
+# @name 3DR Iris Quadrotor SITL (foggy_lidar)
+#
+# @type Quadrotor Wide
+#
+
+. ${R}etc/init.d-posix/airframes/10016_iris
+
+param set-default EKF2_RNG_A_HMAX 10
+

ROMFS/px4fmu_common/init.d-posix/airframes/10040_quadx

@@ -9,8 +9,6 @@
 
 . ${R}etc/init.d/rc.mc_defaults
 
-PX4_SIMULATOR=${PX4_SIMULATOR:=sihsim}
-PX4_SIM_MODEL=${PX4_SIM_MODEL:=quadx}
 
 # disable some checks to allow to fly:
 # - with usb
@@ -41,3 +39,4 @@ param set-default PWM_MAIN_FUNC3 103
 param set-default PWM_MAIN_FUNC4 104
 
 param set SIH_VEHICLE_TYPE 0
+

ROMFS/px4fmu_common/init.d-posix/airframes/10041_airplane

@@ -8,8 +8,6 @@
 
 . ${R}etc/init.d/rc.fw_defaults
 
-PX4_SIMULATOR=${PX4_SIMULATOR:=sihsim}
-PX4_SIM_MODEL=${PX4_SIM_MODEL:=airplane}
 
 # disable some checks to allow to fly:
 # - with usb

ROMFS/px4fmu_common/init.d-posix/airframes/10042_xvert

@@ -8,9 +8,6 @@
 
 . ${R}etc/init.d/rc.vtol_defaults
 
-PX4_SIMULATOR=${PX4_SIMULATOR:=sihsim}
-PX4_SIM_MODEL=${PX4_SIM_MODEL:=xvert}
-
 param set-default VT_ELEV_MC_LOCK 0
 param set-default VT_TYPE 0
 param set-default VT_FW_DIFTHR_EN 1

ROMFS/px4fmu_common/init.d-posix/airframes/1010_gazebo_iris_opt_flow

@@ -1,47 +0,0 @@
-#!/bin/sh
-#
-# @name 3DR Iris Quadrotor SITL (Optical Flow)
-#
-# @type Quadrotor Wide
-#
-
-. ${R}etc/init.d/rc.mc_defaults
-
-
-param set-default CA_AIRFRAME 0
-
-param set-default CA_ROTOR_COUNT 4
-param set-default CA_ROTOR0_PX 0.1515
-param set-default CA_ROTOR0_PY 0.245
-param set-default CA_ROTOR0_KM 0.05
-param set-default CA_ROTOR1_PX -0.1515
-param set-default CA_ROTOR1_PY -0.1875
-param set-default CA_ROTOR1_KM 0.05
-param set-default CA_ROTOR2_PX 0.1515
-param set-default CA_ROTOR2_PY -0.245
-param set-default CA_ROTOR2_KM -0.05
-param set-default CA_ROTOR3_PX -0.1515
-param set-default CA_ROTOR3_PY 0.1875
-param set-default CA_ROTOR3_KM -0.05
-
-param set-default PWM_MAIN_FUNC1 101
-param set-default PWM_MAIN_FUNC2 102
-param set-default PWM_MAIN_FUNC3 103
-param set-default PWM_MAIN_FUNC4 104
-
-# EKF2
-param set-default EKF2_AID_MASK 2
-param set-default EKF2_GPS_CTRL 0
-param set-default EKF2_EVP_NOISE 0.05
-param set-default EKF2_EVA_NOISE 0.05
-
-# LPE: Flow-only mode
-param set-default LPE_FUSION 242
-param set-default LPE_FAKE_ORIGIN 1
-
-param set-default MPC_ALT_MODE 2
-
-param set-default SENS_FLOW_ROT 6
-param set-default SENS_FLOW_MINHGT 0.7
-param set-default SENS_FLOW_MAXHGT 3.0
-param set-default SENS_FLOW_MAXR 2.5

ROMFS/px4fmu_common/init.d-posix/airframes/1010_iris_opt_flow

@@ -0,0 +1,24 @@
+#!/bin/sh
+#
+# @name 3DR Iris Quadrotor SITL (Optical Flow)
+#
+# @type Quadrotor Wide
+#
+
+. ${R}etc/init.d-posix/airframes/10016_iris
+
+# EKF2
+param set-default EKF2_AID_MASK 2
+param set-default EKF2_EVP_NOISE 0.05
+param set-default EKF2_EVA_NOISE 0.05
+
+# LPE: Flow-only mode
+param set-default LPE_FUSION 242
+param set-default LPE_FAKE_ORIGIN 1
+
+param set-default MPC_ALT_MODE 2
+
+param set-default SENS_FLOW_ROT 6
+param set-default SENS_FLOW_MINHGT 0.7
+param set-default SENS_FLOW_MAXHGT 3.0
+param set-default SENS_FLOW_MAXR 2.5

ROMFS/px4fmu_common/init.d-posix/airframes/1011_gazebo_iris_irlock

@@ -1,38 +0,0 @@
-#!/bin/sh
-#
-# @name 3DR Iris Quadrotor SITL (irlock)
-#
-# @type Quadrotor Wide
-#
-
-. ${R}etc/init.d/rc.mc_defaults
-
-
-param set-default CA_AIRFRAME 0
-
-param set-default CA_ROTOR_COUNT 4
-param set-default CA_ROTOR0_PX 0.1515
-param set-default CA_ROTOR0_PY 0.245
-param set-default CA_ROTOR0_KM 0.05
-param set-default CA_ROTOR1_PX -0.1515
-param set-default CA_ROTOR1_PY -0.1875
-param set-default CA_ROTOR1_KM 0.05
-param set-default CA_ROTOR2_PX 0.1515
-param set-default CA_ROTOR2_PY -0.245
-param set-default CA_ROTOR2_KM -0.05
-param set-default CA_ROTOR3_PX -0.1515
-param set-default CA_ROTOR3_PY 0.1875
-param set-default CA_ROTOR3_KM -0.05
-
-param set-default PWM_MAIN_FUNC1 101
-param set-default PWM_MAIN_FUNC2 102
-param set-default PWM_MAIN_FUNC3 103
-param set-default PWM_MAIN_FUNC4 104
-
-# enable fusion of landing target velocity
-param set-default LTEST_MODE 1
-param set-default PLD_HACC_RAD 0.1
-param set-default RTL_PLD_MD 2
-
-# Start up Landing Target Estimator module
-landing_target_estimator start

ROMFS/px4fmu_common/init.d-posix/airframes/1011_iris_irlock

@@ -0,0 +1,16 @@
+#!/bin/sh
+#
+# @name 3DR Iris Quadrotor SITL (irlock)
+#
+# @type Quadrotor Wide
+#
+
+. ${R}etc/init.d-posix/airframes/10016_iris
+
+# enable fusion of landing target velocity
+param set-default LTEST_MODE 1
+param set-default PLD_HACC_RAD 0.1
+param set-default RTL_PLD_MD 2
+
+# Start up Landing Target Estimator module
+landing_target_estimator start

ROMFS/px4fmu_common/init.d-posix/airframes/1012_gazebo_iris_rplidar

@@ -1,33 +0,0 @@
-#!/bin/sh
-#
-# @name 3DR Iris Quadrotor SITL (rplidar)
-#
-# @type Quadrotor Wide
-#
-
-. ${R}etc/init.d/rc.mc_defaults
-
-
-param set-default CA_AIRFRAME 0
-
-param set-default CA_ROTOR_COUNT 4
-param set-default CA_ROTOR0_PX 0.1515
-param set-default CA_ROTOR0_PY 0.245
-param set-default CA_ROTOR0_KM 0.05
-param set-default CA_ROTOR1_PX -0.1515
-param set-default CA_ROTOR1_PY -0.1875
-param set-default CA_ROTOR1_KM 0.05
-param set-default CA_ROTOR2_PX 0.1515
-param set-default CA_ROTOR2_PY -0.245
-param set-default CA_ROTOR2_KM -0.05
-param set-default CA_ROTOR3_PX -0.1515
-param set-default CA_ROTOR3_PY 0.1875
-param set-default CA_ROTOR3_KM -0.05
-
-param set-default PWM_MAIN_FUNC1 101
-param set-default PWM_MAIN_FUNC2 102
-param set-default PWM_MAIN_FUNC3 103
-param set-default PWM_MAIN_FUNC4 104
-
-param set-default LPE_FUSION 242
-

ROMFS/px4fmu_common/init.d-posix/airframes/1012_iris_rplidar

@@ -0,0 +1,11 @@
+#!/bin/sh
+#
+# @name 3DR Iris Quadrotor SITL (rplidar)
+#
+# @type Quadrotor Wide
+#
+
+. ${R}etc/init.d-posix/airframes/10016_iris
+
+param set-default LPE_FUSION 242
+

ROMFS/px4fmu_common/init.d-posix/airframes/1013_gazebo_iris_vision

@@ -1,42 +0,0 @@
-#!/bin/sh
-#
-# @name 3DR Iris Quadrotor SITL (Vision)
-#
-# @type Quadrotor Wide
-#
-
-. ${R}etc/init.d/rc.mc_defaults
-
-
-param set-default CA_AIRFRAME 0
-
-param set-default CA_ROTOR_COUNT 4
-param set-default CA_ROTOR0_PX 0.1515
-param set-default CA_ROTOR0_PY 0.245
-param set-default CA_ROTOR0_KM 0.05
-param set-default CA_ROTOR1_PX -0.1515
-param set-default CA_ROTOR1_PY -0.1875
-param set-default CA_ROTOR1_KM 0.05
-param set-default CA_ROTOR2_PX 0.1515
-param set-default CA_ROTOR2_PY -0.245
-param set-default CA_ROTOR2_KM -0.05
-param set-default CA_ROTOR3_PX -0.1515
-param set-default CA_ROTOR3_PY 0.1875
-param set-default CA_ROTOR3_KM -0.05
-
-param set-default PWM_MAIN_FUNC1 101
-param set-default PWM_MAIN_FUNC2 102
-param set-default PWM_MAIN_FUNC3 103
-param set-default PWM_MAIN_FUNC4 104
-
-# EKF2: Vision position and heading
-param set-default EKF2_AID_MASK 24
-param set-default EKF2_EV_DELAY 5
-param set-default EKF2_GPS_CTRL 0
-
-# LPE: Vision + baro
-param set-default LPE_FUSION 132
-
-# AEQ: External heading set to use vision input
-param set-default ATT_EXT_HDG_M 1
-

ROMFS/px4fmu_common/init.d-posix/airframes/1013_iris_vision

@@ -0,0 +1,19 @@
+#!/bin/sh
+#
+# @name 3DR Iris Quadrotor SITL (Vision)
+#
+# @type Quadrotor Wide
+#
+
+. ${R}etc/init.d-posix/airframes/10016_iris
+
+# EKF2: Vision position and heading
+param set-default EKF2_AID_MASK 24
+param set-default EKF2_EV_DELAY 5
+
+# LPE: Vision + baro
+param set-default LPE_FUSION 132
+
+# AEQ: External heading set to use vision input
+param set-default ATT_EXT_HDG_M 1
+

ROMFS/px4fmu_common/init.d-posix/airframes/1015_gazebo_iris_obs_avoid

@@ -1,34 +0,0 @@
-#!/bin/sh
-#
-# @name 3DR Iris Quadrotor SITL (Obstacle Avoidance)
-#
-# @type Quadrotor Wide
-#
-
-. ${R}etc/init.d/rc.mc_defaults
-
-
-param set-default CA_AIRFRAME 0
-
-param set-default CA_ROTOR_COUNT 4
-param set-default CA_ROTOR0_PX 0.1515
-param set-default CA_ROTOR0_PY 0.245
-param set-default CA_ROTOR0_KM 0.05
-param set-default CA_ROTOR1_PX -0.1515
-param set-default CA_ROTOR1_PY -0.1875
-param set-default CA_ROTOR1_KM 0.05
-param set-default CA_ROTOR2_PX 0.1515
-param set-default CA_ROTOR2_PY -0.245
-param set-default CA_ROTOR2_KM -0.05
-param set-default CA_ROTOR3_PX -0.1515
-param set-default CA_ROTOR3_PY 0.1875
-param set-default CA_ROTOR3_KM -0.05
-
-param set-default PWM_MAIN_FUNC1 101
-param set-default PWM_MAIN_FUNC2 102
-param set-default PWM_MAIN_FUNC3 103
-param set-default PWM_MAIN_FUNC4 104
-
-param set-default COM_OBS_AVOID 1
-param set-default MPC_XY_CRUISE 5.0
-

ROMFS/px4fmu_common/init.d-posix/airframes/1015_iris_obs_avoid

@@ -0,0 +1,12 @@
+#!/bin/sh
+#
+# @name 3DR Iris Quadrotor SITL (Obstacle Avoidance)
+#
+# @type Quadrotor Wide
+#
+
+. ${R}etc/init.d-posix/airframes/10016_iris
+
+param set-default COM_OBS_AVOID 1
+param set-default MPC_XY_CRUISE 5.0
+

ROMFS/px4fmu_common/init.d-posix/airframes/1017_gazebo_iris_opt_flow_mockup

@@ -1,40 +0,0 @@
-#!/bin/sh
-#
-# @name 3DR Iris Quadrotor SITL (Optical Flow)
-#
-# @type Quadrotor Wide
-#
-
-. ${R}etc/init.d/rc.mc_defaults
-
-
-param set-default CA_AIRFRAME 0
-
-param set-default CA_ROTOR_COUNT 4
-param set-default CA_ROTOR0_PX 0.1515
-param set-default CA_ROTOR0_PY 0.245
-param set-default CA_ROTOR0_KM 0.05
-param set-default CA_ROTOR1_PX -0.1515
-param set-default CA_ROTOR1_PY -0.1875
-param set-default CA_ROTOR1_KM 0.05
-param set-default CA_ROTOR2_PX 0.1515
-param set-default CA_ROTOR2_PY -0.245
-param set-default CA_ROTOR2_KM -0.05
-param set-default CA_ROTOR3_PX -0.1515
-param set-default CA_ROTOR3_PY 0.1875
-param set-default CA_ROTOR3_KM -0.05
-
-param set-default PWM_MAIN_FUNC1 101
-param set-default PWM_MAIN_FUNC2 102
-param set-default PWM_MAIN_FUNC3 103
-param set-default PWM_MAIN_FUNC4 104
-
-# EKF2
-param set-default EKF2_AID_MASK 2
-param set-default EKF2_GPS_CTRL 0
-
-# LPE: Flow-only mode
-param set-default LPE_FUSION 242
-param set-default LPE_FAKE_ORIGIN 1
-
-param set-default MPC_ALT_MODE 2

ROMFS/px4fmu_common/init.d-posix/airframes/1017_iris_opt_flow_mockup

@@ -0,0 +1,17 @@
+#!/bin/sh
+#
+# @name 3DR Iris Quadrotor SITL (Optical Flow)
+#
+# @type Quadrotor Wide
+#
+
+. ${R}etc/init.d-posix/airframes/10016_iris
+
+# EKF2
+param set-default EKF2_AID_MASK 2
+
+# LPE: Flow-only mode
+param set-default LPE_FUSION 242
+param set-default LPE_FAKE_ORIGIN 1
+
+param set-default MPC_ALT_MODE 2

ROMFS/px4fmu_common/init.d-posix/airframes/1018_iris_vision_velocity

@@ -0,0 +1,12 @@
+#!/bin/sh
+#
+# @name 3DR Iris Quadrotor SITL (Vision Velocity)
+#
+# @type Quadrotor Wide
+#
+
+. ${R}etc/init.d-posix/airframes/10016_iris
+
+# EKF2: Vision velocity and heading
+param set-default EKF2_AID_MASK 272
+param set-default EKF2_EV_DELAY 5

ROMFS/px4fmu_common/init.d-posix/airframes/1019_gazebo_iris_dual_gps

@@ -1,33 +0,0 @@
-#!/bin/sh
-#
-# @name 3DR Iris Quadrotor SITL (Dual GPS)
-#
-# @type Quadrotor Wide
-#
-
-. ${R}etc/init.d/rc.mc_defaults
-
-
-param set-default CA_AIRFRAME 0
-
-param set-default CA_ROTOR_COUNT 4
-param set-default CA_ROTOR0_PX 0.1515
-param set-default CA_ROTOR0_PY 0.245
-param set-default CA_ROTOR0_KM 0.05
-param set-default CA_ROTOR1_PX -0.1515
-param set-default CA_ROTOR1_PY -0.1875
-param set-default CA_ROTOR1_KM 0.05
-param set-default CA_ROTOR2_PX 0.1515
-param set-default CA_ROTOR2_PY -0.245
-param set-default CA_ROTOR2_KM -0.05
-param set-default CA_ROTOR3_PX -0.1515
-param set-default CA_ROTOR3_PY 0.1875
-param set-default CA_ROTOR3_KM -0.05
-
-param set-default PWM_MAIN_FUNC1 101
-param set-default PWM_MAIN_FUNC2 102
-param set-default PWM_MAIN_FUNC3 103
-param set-default PWM_MAIN_FUNC4 104
-
-# EKF2: Multi GPS blending
-param set-default SENS_GPS_MASK 7

ROMFS/px4fmu_common/init.d-posix/airframes/1019_iris_dual_gps

@@ -0,0 +1,11 @@
+#!/bin/sh
+#
+# @name 3DR Iris Quadrotor SITL (Dual GPS)
+#
+# @type Quadrotor Wide
+#
+
+. ${R}etc/init.d-posix/airframes/10016_iris
+
+# EKF2: Multi GPS blending
+param set-default SENS_GPS_MASK 7

ROMFS/px4fmu_common/init.d-posix/airframes/1031_gazebo_plane_cam

@@ -1,81 +0,0 @@
-#!/bin/sh
-#
-# @name Plane SITL with camera
-#
-
-. ${R}etc/init.d/rc.fw_defaults
-
-param set-default EKF2_MAG_ACCLIM 0
-param set-default EKF2_MAG_YAWLIM 0
-
-param set-default FW_LND_AIRSPD_SC 1
-param set-default FW_LND_ANG 8
-
-param set-default FW_L1_PERIOD 12
-
-param set-default FW_PR_P 0.9
-param set-default FW_PR_FF 0.5
-param set-default FW_PR_I 0.5
-param set-default TRIM_PITCH -0.15
-
-param set-default FW_PSP_OFF 2
-param set-default FW_P_LIM_MIN -15
-
-param set-default FW_RR_FF 0.5
-param set-default FW_RR_P 0.3
-param set-default FW_RR_I 0.5
-
-param set-default FW_YR_FF 0.5
-param set-default FW_YR_P 0.6
-param set-default FW_YR_I 0.5
-
-param set-default FW_SPOILERS_LND 0.4
-
-param set-default FW_THR_MAX 0.6
-param set-default FW_THR_MIN 0.05
-param set-default FW_THR_TRIM 0.25
-
-param set-default FW_T_CLMB_MAX 8
-param set-default FW_T_SINK_MAX 2.7
-param set-default FW_T_SINK_MIN 2.2
-
-param set-default FW_W_EN 1
-
-param set-default MIS_LTRMIN_ALT 30
-param set-default MIS_TAKEOFF_ALT 30
-
-param set-default NAV_ACC_RAD 15
-param set-default NAV_DLL_ACT 2
-
-param set-default RWTO_TKOFF 1
-
-param set-default CA_AIRFRAME 1
-
-param set-default CA_ROTOR_COUNT 1
-param set-default CA_ROTOR0_PX 0.3
-
-param set-default CA_SV_CS_COUNT 6
-param set-default CA_SV_CS0_TRQ_R -0.5
-param set-default CA_SV_CS0_TYPE 1
-param set-default CA_SV_CS1_TRQ_R 0.5
-param set-default CA_SV_CS1_TYPE 2
-param set-default CA_SV_CS2_TRQ_P 1.0
-param set-default CA_SV_CS2_TYPE 3
-param set-default CA_SV_CS3_TRQ_Y 1.0
-param set-default CA_SV_CS3_TYPE 4
-param set-default CA_SV_CS4_TYPE 9
-param set-default CA_SV_CS5_TYPE 10
-param set-default PWM_MAIN_FUNC3 204
-param set-default PWM_MAIN_FUNC4 205
-param set-default PWM_MAIN_FUNC5 101
-param set-default PWM_MAIN_FUNC6 201
-param set-default PWM_MAIN_FUNC7 202
-param set-default PWM_MAIN_FUNC8 203
-param set-default PWM_MAIN_FUNC9 206
-param set-default PWM_MAIN_REV 256
-
-# Camera trigger interface is MAVLink
-param set-default TRIG_INTERFACE 3
-
-# Distance trigger mode enabled
-param set-default TRIG_MODE 4

ROMFS/px4fmu_common/init.d-posix/airframes/1031_plane_cam

@@ -0,0 +1,12 @@
+#!/bin/sh
+#
+# @name Plane SITL with camera
+#
+
+. ${R}etc/init.d-posix/airframes/1030_plane
+
+# Camera trigger interface is MAVLink
+param set-default TRIG_INTERFACE 3
+
+# Distance trigger mode enabled
+param set-default TRIG_MODE 4

ROMFS/px4fmu_common/init.d-posix/airframes/1032_gazebo_plane_catapult

@@ -1,78 +0,0 @@
-#!/bin/sh
-#
-# @name Plane SITL with catapult
-#
-
-. ${R}etc/init.d/rc.fw_defaults
-
-param set-default EKF2_MAG_ACCLIM 0
-param set-default EKF2_MAG_YAWLIM 0
-
-param set-default FW_LND_AIRSPD_SC 1
-param set-default FW_LND_ANG 8
-
-param set-default FW_L1_PERIOD 12
-
-param set-default FW_PR_P 0.9
-param set-default FW_PR_FF 0.5
-param set-default FW_PR_I 0.5
-param set-default TRIM_PITCH -0.15
-
-param set-default FW_PSP_OFF 2
-param set-default FW_P_LIM_MIN -15
-
-param set-default FW_RR_FF 0.5
-param set-default FW_RR_P 0.3
-param set-default FW_RR_I 0.5
-
-param set-default FW_YR_FF 0.5
-param set-default FW_YR_P 0.6
-param set-default FW_YR_I 0.5
-
-param set-default FW_SPOILERS_LND 0.4
-
-param set-default FW_THR_MAX 0.6
-param set-default FW_THR_MIN 0.05
-param set-default FW_THR_TRIM 0.25
-
-param set-default FW_T_CLMB_MAX 8
-param set-default FW_T_SINK_MAX 2.7
-param set-default FW_T_SINK_MIN 2.2
-
-param set-default FW_W_EN 1
-
-param set-default MIS_LTRMIN_ALT 30
-param set-default MIS_TAKEOFF_ALT 30
-
-param set-default NAV_ACC_RAD 15
-param set-default NAV_DLL_ACT 2
-
-param set-default RWTO_TKOFF 1
-
-param set-default CA_AIRFRAME 1
-
-param set-default CA_ROTOR_COUNT 1
-param set-default CA_ROTOR0_PX 0.3
-
-param set-default CA_SV_CS_COUNT 6
-param set-default CA_SV_CS0_TRQ_R -0.5
-param set-default CA_SV_CS0_TYPE 1
-param set-default CA_SV_CS1_TRQ_R 0.5
-param set-default CA_SV_CS1_TYPE 2
-param set-default CA_SV_CS2_TRQ_P 1.0
-param set-default CA_SV_CS2_TYPE 3
-param set-default CA_SV_CS3_TRQ_Y 1.0
-param set-default CA_SV_CS3_TYPE 4
-param set-default CA_SV_CS4_TYPE 9
-param set-default CA_SV_CS5_TYPE 10
-param set-default PWM_MAIN_FUNC3 204
-param set-default PWM_MAIN_FUNC4 205
-param set-default PWM_MAIN_FUNC5 101
-param set-default PWM_MAIN_FUNC6 201
-param set-default PWM_MAIN_FUNC7 202
-param set-default PWM_MAIN_FUNC8 203
-param set-default PWM_MAIN_FUNC9 206
-param set-default PWM_MAIN_REV 256
-
-param set-default RWTO_TKOFF 0
-

ROMFS/px4fmu_common/init.d-posix/airframes/1032_plane_catapult

@@ -0,0 +1,9 @@
+#!/bin/sh
+#
+# @name Plane SITL with catapult
+#
+
+. ${R}etc/init.d-posix/airframes/1030_plane
+
+param set-default RWTO_TKOFF 0
+

ROMFS/px4fmu_common/init.d-posix/airframes/1034_flightgear_rascal-electric

@@ -1,65 +0,0 @@
-#!/bin/sh
-#
-# @name Plane SITL
-#
-
-. ${R}etc/init.d/rc.fw_defaults
-
-param set-default FW_LND_AIRSPD_SC 1.1
-param set-default FW_LND_ANG 5
-param set-default FW_LND_FL_PMIN 9.5
-param set-default FW_LND_FL_PMAX 20
-param set-default FW_LND_FLALT 5
-
-param set-default FW_L1_PERIOD 25
-
-param set-default FW_PR_FF 0.40
-param set-default FW_PR_I 0.05
-param set-default FW_PR_P 0.05
-
-param set-default FW_R_TC 0.45
-param set-default FW_RR_FF 0.40
-param set-default FW_RR_I 0.132
-param set-default FW_RR_P 0.085
-
-param set-default FW_W_EN 1
-
-param set-default MIS_LTRMIN_ALT 30
-param set-default MIS_TAKEOFF_ALT 20
-param set-default MIS_DIST_1WP 2500
-param set-default MIS_DIST_WPS 10000
-
-param set-default NAV_ACC_RAD 15
-param set-default NAV_DLL_ACT 2
-
-param set-default RWTO_TKOFF 1
-
-param set-default RWTO_MAX_PITCH 20
-
-param set-default RWTO_PSP 8
-param set-default RWTO_AIRSPD_SCL 1.8
-
-param set-default CA_AIRFRAME 1
-
-param set-default CA_ROTOR_COUNT 1
-param set-default CA_ROTOR0_PX 0.3
-
-param set-default CA_SV_CS_COUNT 6
-param set-default CA_SV_CS0_TRQ_R -0.5
-param set-default CA_SV_CS0_TYPE 1
-param set-default CA_SV_CS1_TRQ_R 0.5
-param set-default CA_SV_CS1_TYPE 2
-param set-default CA_SV_CS2_TRQ_P 1.0
-param set-default CA_SV_CS2_TYPE 3
-param set-default CA_SV_CS3_TRQ_Y 1.0
-param set-default CA_SV_CS3_TYPE 4
-param set-default CA_SV_CS4_TYPE 9
-param set-default CA_SV_CS5_TYPE 10
-param set-default PWM_MAIN_FUNC3 204
-param set-default PWM_MAIN_FUNC4 205
-param set-default PWM_MAIN_FUNC5 101
-param set-default PWM_MAIN_FUNC6 201
-param set-default PWM_MAIN_FUNC7 202
-param set-default PWM_MAIN_FUNC8 203
-param set-default PWM_MAIN_FUNC9 206
-param set-default PWM_MAIN_REV 256

ROMFS/px4fmu_common/init.d-posix/airframes/1034_rascal-electric

@@ -63,3 +63,4 @@ param set-default PWM_MAIN_FUNC7 202
 param set-default PWM_MAIN_FUNC8 203
 param set-default PWM_MAIN_FUNC9 206
 param set-default PWM_MAIN_REV 256
+

ROMFS/px4fmu_common/init.d-posix/airframes/1038_gazebo_glider

@@ -1,78 +0,0 @@
-#!/bin/sh
-#
-# @name Plane SITL with catapult
-#
-
-. ${R}etc/init.d/rc.fw_defaults
-
-param set-default EKF2_MAG_ACCLIM 0
-param set-default EKF2_MAG_YAWLIM 0
-
-param set-default FW_LND_AIRSPD_SC 1
-param set-default FW_LND_ANG 8
-
-param set-default FW_L1_PERIOD 12
-
-param set-default FW_PR_P 0.9
-param set-default FW_PR_FF 0.5
-param set-default FW_PR_I 0.5
-param set-default TRIM_PITCH -0.15
-
-param set-default FW_PSP_OFF 2
-param set-default FW_P_LIM_MIN -15
-
-param set-default FW_RR_FF 0.5
-param set-default FW_RR_P 0.3
-param set-default FW_RR_I 0.5
-
-param set-default FW_YR_FF 0.5
-param set-default FW_YR_P 0.6
-param set-default FW_YR_I 0.5
-
-param set-default FW_SPOILERS_LND 0.4
-
-param set-default FW_THR_MAX 0.6
-param set-default FW_THR_MIN 0.05
-param set-default FW_THR_TRIM 0.25
-
-param set-default FW_T_CLMB_MAX 8
-param set-default FW_T_SINK_MAX 2.7
-param set-default FW_T_SINK_MIN 2.2
-
-param set-default FW_W_EN 1
-
-param set-default MIS_LTRMIN_ALT 30
-param set-default MIS_TAKEOFF_ALT 30
-
-param set-default NAV_ACC_RAD 15
-param set-default NAV_DLL_ACT 2
-
-param set-default RWTO_TKOFF 1
-
-param set-default CA_AIRFRAME 1
-
-param set-default CA_ROTOR_COUNT 1
-param set-default CA_ROTOR0_PX 0.3
-
-param set-default CA_SV_CS_COUNT 6
-param set-default CA_SV_CS0_TRQ_R -0.5
-param set-default CA_SV_CS0_TYPE 1
-param set-default CA_SV_CS1_TRQ_R 0.5
-param set-default CA_SV_CS1_TYPE 2
-param set-default CA_SV_CS2_TRQ_P 1.0
-param set-default CA_SV_CS2_TYPE 3
-param set-default CA_SV_CS3_TRQ_Y 1.0
-param set-default CA_SV_CS3_TYPE 4
-param set-default CA_SV_CS4_TYPE 9
-param set-default CA_SV_CS5_TYPE 10
-param set-default PWM_MAIN_FUNC3 204
-param set-default PWM_MAIN_FUNC4 205
-param set-default PWM_MAIN_FUNC5 101
-param set-default PWM_MAIN_FUNC6 201
-param set-default PWM_MAIN_FUNC7 202
-param set-default PWM_MAIN_FUNC8 203
-param set-default PWM_MAIN_FUNC9 206
-param set-default PWM_MAIN_REV 256
-
-param set-default FW_THR_TRIM 0.0
-param set-default RWTO_TKOFF 0

ROMFS/px4fmu_common/init.d-posix/airframes/1038_glider

@@ -0,0 +1,9 @@
+#!/bin/sh
+#
+# @name Plane SITL with catapult
+#
+
+. ${R}etc/init.d-posix/airframes/1030_plane
+
+param set-default FW_THR_TRIM 0.0
+param set-default RWTO_TKOFF 0

ROMFS/px4fmu_common/init.d-posix/airframes/1043_gazebo_standard_vtol_drop

@@ -1,93 +0,0 @@
-#!/bin/sh
-#
-# @name Standard VTOL
-#
-# @type Standard VTOL
-#
-
-. ${R}etc/init.d/rc.vtol_defaults
-
-# TODO: Enable motor failure detection when the
-# VTOL no longer reports 0A for all ESCs in SITL
-param set-default FD_ACT_EN 0
-param set-default FD_ACT_MOT_TOUT 500
-
-param set-default CA_AIRFRAME 2
-
-param set-default CA_ROTOR_COUNT 5
-param set-default CA_ROTOR0_PX 0.1515
-param set-default CA_ROTOR0_PY 0.245
-param set-default CA_ROTOR0_KM 0.05
-param set-default CA_ROTOR1_PX -0.1515
-param set-default CA_ROTOR1_PY -0.1875
-param set-default CA_ROTOR1_KM 0.05
-param set-default CA_ROTOR2_PX 0.1515
-param set-default CA_ROTOR2_PY -0.245
-param set-default CA_ROTOR2_KM -0.05
-param set-default CA_ROTOR3_PX -0.1515
-param set-default CA_ROTOR3_PY 0.1875
-param set-default CA_ROTOR3_KM -0.05
-param set-default CA_ROTOR4_AX 1.0
-param set-default CA_ROTOR4_AZ 0.0
-param set-default CA_ROTOR4_PX 0.2
-
-param set-default CA_SV_CS_COUNT 3
-param set-default CA_SV_CS0_TYPE 1
-param set-default CA_SV_CS0_TRQ_R -0.5
-param set-default CA_SV_CS1_TYPE 2
-param set-default CA_SV_CS1_TRQ_R 0.5
-param set-default CA_SV_CS2_TYPE 3
-param set-default CA_SV_CS2_TRQ_P 1.0
-param set-default PWM_MAIN_FUNC1 101
-param set-default PWM_MAIN_FUNC2 102
-param set-default PWM_MAIN_FUNC3 103
-param set-default PWM_MAIN_FUNC4 104
-param set-default PWM_MAIN_FUNC5 105
-param set-default PWM_MAIN_FUNC6 201
-param set-default PWM_MAIN_FUNC7 202
-param set-default PWM_MAIN_FUNC8 203
-
-param set-default FW_L1_PERIOD 12
-param set-default FW_PR_FF 0.2
-param set-default FW_PR_P 0.9
-param set-default FW_PSP_OFF 2
-param set-default FW_P_LIM_MIN -15
-param set-default FW_RR_FF 0.1
-param set-default FW_RR_P 0.3
-param set-default FW_THR_TRIM 0.25
-param set-default FW_THR_MAX 0.6
-param set-default FW_THR_MIN 0.05
-param set-default FW_T_CLMB_MAX 8
-param set-default FW_T_SINK_MAX 2.7
-param set-default FW_T_SINK_MIN 2.2
-
-param set-default MC_ROLLRATE_P 0.3
-param set-default MC_YAW_P 1.6
-
-param set-default MIS_TAKEOFF_ALT 10
-
-param set-default MPC_ACC_HOR_MAX 2
-param set-default MPC_XY_P 0.8
-param set-default MPC_XY_VEL_P_ACC 3
-param set-default MPC_XY_VEL_I_ACC 4
-param set-default MPC_XY_VEL_D_ACC 0.1
-
-param set-default NAV_ACC_RAD 5
-
-param set-default VT_FWD_THRUST_EN 4
-param set-default VT_F_TRANS_THR 0.75
-param set-default VT_MOT_ID 1234
-param set-default VT_FW_MOT_OFFID 1234
-param set-default VT_B_TRANS_DUR 8
-param set-default VT_TYPE 2
-
-
-# Gimbal
-param set-default PWM_MAIN_FUNC9 420
-param set-default PWM_MAIN_FUNC10 421
-param set-default PWM_MAIN_FUNC11 422
-
-param set-default RC_MAP_AUX1 8
-param set-default RC_MAP_AUX2 9
-param set-default RC_MAP_AUX3 10
-

ROMFS/px4fmu_common/init.d-posix/airframes/1043_standard_vtol_drop

@@ -0,0 +1,18 @@
+#!/bin/sh
+#
+# @name Standard VTOL
+#
+# @type Standard VTOL
+#
+
+. ${R}etc/init.d-posix/airframes/1040_standard_vtol
+
+# Gimbal
+param set-default PWM_MAIN_FUNC9 420
+param set-default PWM_MAIN_FUNC10 421
+param set-default PWM_MAIN_FUNC11 422
+
+param set-default RC_MAP_AUX1 8
+param set-default RC_MAP_AUX2 9
+param set-default RC_MAP_AUX3 10
+

ROMFS/px4fmu_common/init.d-posix/airframes/1044_gazebo_plane_lidar

@@ -1,78 +0,0 @@
-#!/bin/sh
-#
-# @name Plane SITL with downward facing LIDAR.
-#
-
-. ${R}etc/init.d/rc.fw_defaults
-
-param set-default EKF2_MAG_ACCLIM 0
-param set-default EKF2_MAG_YAWLIM 0
-
-param set-default FW_LND_AIRSPD_SC 1
-param set-default FW_LND_ANG 8
-
-param set-default FW_L1_PERIOD 12
-
-param set-default FW_PR_P 0.9
-param set-default FW_PR_FF 0.5
-param set-default FW_PR_I 0.5
-param set-default TRIM_PITCH -0.15
-
-param set-default FW_PSP_OFF 2
-param set-default FW_P_LIM_MIN -15
-
-param set-default FW_RR_FF 0.5
-param set-default FW_RR_P 0.3
-param set-default FW_RR_I 0.5
-
-param set-default FW_YR_FF 0.5
-param set-default FW_YR_P 0.6
-param set-default FW_YR_I 0.5
-
-param set-default FW_SPOILERS_LND 0.4
-
-param set-default FW_THR_MAX 0.6
-param set-default FW_THR_MIN 0.05
-param set-default FW_THR_TRIM 0.25
-
-param set-default FW_T_CLMB_MAX 8
-param set-default FW_T_SINK_MAX 2.7
-param set-default FW_T_SINK_MIN 2.2
-
-param set-default FW_W_EN 1
-
-param set-default MIS_LTRMIN_ALT 30
-param set-default MIS_TAKEOFF_ALT 30
-
-param set-default NAV_ACC_RAD 15
-param set-default NAV_DLL_ACT 2
-
-param set-default RWTO_TKOFF 1
-
-param set-default CA_AIRFRAME 1
-
-param set-default CA_ROTOR_COUNT 1
-param set-default CA_ROTOR0_PX 0.3
-
-param set-default CA_SV_CS_COUNT 6
-param set-default CA_SV_CS0_TRQ_R -0.5
-param set-default CA_SV_CS0_TYPE 1
-param set-default CA_SV_CS1_TRQ_R 0.5
-param set-default CA_SV_CS1_TYPE 2
-param set-default CA_SV_CS2_TRQ_P 1.0
-param set-default CA_SV_CS2_TYPE 3
-param set-default CA_SV_CS3_TRQ_Y 1.0
-param set-default CA_SV_CS3_TYPE 4
-param set-default CA_SV_CS4_TYPE 9
-param set-default CA_SV_CS5_TYPE 10
-param set-default PWM_MAIN_FUNC3 204
-param set-default PWM_MAIN_FUNC4 205
-param set-default PWM_MAIN_FUNC5 101
-param set-default PWM_MAIN_FUNC6 201
-param set-default PWM_MAIN_FUNC7 202
-param set-default PWM_MAIN_FUNC8 203
-param set-default PWM_MAIN_FUNC9 206
-param set-default PWM_MAIN_REV 256
-
-
-param set-default FW_LND_USETER 1

ROMFS/px4fmu_common/init.d-posix/airframes/1044_plane_lidar

@@ -0,0 +1,9 @@
+#!/bin/sh
+#
+# @name Plane SITL with downward facing LIDAR.
+#
+
+. ${R}etc/init.d-posix/airframes/1030_plane
+
+param set-default FW_LND_USETER 1
+

ROMFS/px4fmu_common/init.d-posix/airframes/4001_ign_x500

@@ -1,50 +0,0 @@
-#!/bin/sh
-#
-# @name Ignition Gazebo X3
-#
-# @type Quadrotor
-#
-
-. ${R}etc/init.d/rc.mc_defaults
-
-PX4_SIMULATOR=${PX4_SIMULATOR:=ignition}
-PX4_SIM_MODEL=${PX4_SIM_MODEL:=x500}
-PX4_SIM_WORLD=${PX4_SIM_WORLD:=default}
-
-param set-default SYS_CTRL_ALLOC 1
-
-param set-default CA_AIRFRAME 0
-param set-default CA_ROTOR_COUNT 4
-
-param set-default CA_ROTOR0_PX 0.13
-param set-default CA_ROTOR0_PY 0.22
-param set-default CA_ROTOR0_KM  0.05
-
-param set-default CA_ROTOR1_PX -0.13
-param set-default CA_ROTOR1_PY -0.20
-param set-default CA_ROTOR1_KM  0.05
-
-param set-default CA_ROTOR2_PX 0.13
-param set-default CA_ROTOR2_PY -0.22
-param set-default CA_ROTOR2_KM -0.05
-
-param set-default CA_ROTOR3_PX -0.13
-param set-default CA_ROTOR3_PY 0.20
-param set-default CA_ROTOR3_KM -0.05
-
-param set-default SIM_IGN_FUNC1 101
-param set-default SIM_IGN_FUNC2 102
-param set-default SIM_IGN_FUNC3 103
-param set-default SIM_IGN_FUNC4 104
-
-param set-default SIM_IGN_MIN1 150
-param set-default SIM_IGN_MIN2 150
-param set-default SIM_IGN_MIN3 150
-param set-default SIM_IGN_MIN4 150
-
-param set-default SIM_IGN_MAX1 1000
-param set-default SIM_IGN_MAX2 1000
-param set-default SIM_IGN_MAX3 1000
-param set-default SIM_IGN_MAX4 1000
-
-param set-default MPC_THR_HOVER 0.60

ROMFS/px4fmu_common/init.d-posix/airframes/6001_ign_x4

@@ -1,80 +0,0 @@
-#!/bin/sh
-#
-# @name Ignition Gazebo X4
-#
-# @type Quadrotor
-#
-
-. ${R}etc/init.d/rc.mc_defaults
-
-PX4_SIMULATOR=${PX4_SIMULATOR:=ignition}
-PX4_SIM_MODEL=${PX4_SIM_MODEL:=x4}
-PX4_SIM_WORLD=${PX4_SIM_WORLD:=default}
-
-param set-default SYS_CTRL_ALLOC 1
-
-param set-default CA_AIRFRAME 0
-param set-default CA_ROTOR_COUNT 6
-
-param set-default CA_ROTOR0_PX  0.25
-param set-default CA_ROTOR0_PY -0.15
-param set-default CA_ROTOR0_KM  0.05
-
-param set-default CA_ROTOR1_PX  0.00
-param set-default CA_ROTOR1_PY -0.29
-param set-default CA_ROTOR1_KM -0.05
-
-param set-default CA_ROTOR2_PX -0.25
-param set-default CA_ROTOR2_PY -0.15
-param set-default CA_ROTOR2_KM  0.05
-
-param set-default CA_ROTOR3_PX -0.25
-param set-default CA_ROTOR3_PY  0.15
-param set-default CA_ROTOR3_KM -0.05
-
-param set-default CA_ROTOR4_PX  0.00
-param set-default CA_ROTOR4_PY  0.29
-param set-default CA_ROTOR4_KM  0.05
-
-param set-default CA_ROTOR5_PX  0.25
-param set-default CA_ROTOR5_PY  0.15
-param set-default CA_ROTOR5_KM -0.05
-
-param set-default SIM_IGN_FUNC1 101
-param set-default SIM_IGN_FUNC2 102
-param set-default SIM_IGN_FUNC3 103
-param set-default SIM_IGN_FUNC4 104
-param set-default SIM_IGN_FUNC5 105
-param set-default SIM_IGN_FUNC6 106
-
-param set-default SIM_IGN_MIN1 150
-param set-default SIM_IGN_MIN2 150
-param set-default SIM_IGN_MIN3 150
-param set-default SIM_IGN_MIN4 150
-param set-default SIM_IGN_MIN5 150
-param set-default SIM_IGN_MIN6 150
-
-param set-default SIM_IGN_MAX1 1000
-param set-default SIM_IGN_MAX2 1000
-param set-default SIM_IGN_MAX3 1000
-param set-default SIM_IGN_MAX4 1000
-param set-default SIM_IGN_MAX5 1000
-param set-default SIM_IGN_MAX6 1000
-
-
-param set-default MC_PITCHRATE_D 0.0016
-param set-default MC_PITCHRATE_I 0.2500
-param set-default MC_PITCHRATE_P 0.1831
-param set-default MC_PITCH_P 5.216
-
-param set-default MC_ROLLRATE_D 0.0022
-param set-default MC_ROLLRATE_I 0.2095
-param set-default MC_ROLLRATE_P 0.1570
-param set-default MC_ROLL_P 6.081
-
-param set-default MC_YAWRATE_D 0.0009
-param set-default MC_YAWRATE_I 0.1800
-param set-default MC_YAWRATE_P 0.1773
-param set-default MC_YAW_P 5.386490
-
-param set-default MPC_THR_HOVER 0.61

ROMFS/px4fmu_common/init.d-posix/airframes/CMakeLists.txt

@@ -32,58 +32,49 @@
 ############################################################################
 
 px4_add_romfs_files(
-	1010_gazebo_iris_opt_flow
-	1010_gazebo_iris_opt_flow.post
-	1011_gazebo_iris_irlock
-	1012_gazebo_iris_rplidar
-	1013_gazebo_iris_vision
-	1013_gazebo_iris_vision.post
-	1015_gazebo_iris_obs_avoid
-	1015_gazebo_iris_obs_avoid.post
-	1017_gazebo_iris_opt_flow_mockup
-	1019_gazebo_iris_dual_gps
-	1021_gazebo_uuv_hippocampus
-	1022_gazebo_uuv_bluerov2_heavy
-	1030_gazebo_plane
-	1031_gazebo_plane_cam
-	1032_gazebo_plane_catapult
-	1033_jsbsim_rascal
-	1034_flightgear_rascal-electric
-	1035_gazebo_techpod
-	1036_jsbsim_malolo
-	1037_gazebo_believer
-	1038_gazebo_glider
-	1039_flightgear_rascal
-	1040_gazebo_standard_vtol
-	1041_gazebo_tailsitter
-	1042_gazebo_tiltrotor
-	1043_gazebo_standard_vtol_drop
-	1044_gazebo_plane_lidar
-	1060_gazebo_rover
-	1061_gazebo_r1_rover
-	1062_flightgear_tf-r1
-	1070_gazebo_boat
-
-	2507_gazebo_cloudship
-
-	3010_jsbsim_quadrotor_x
-	3011_jsbsim_hexarotor_x
-
-	4001_ign_x500
-
-	6001_ign_x4
-	6011_gazebo_typhoon_h480
-	6011_gazebo_typhoon_h480.post
-
-	10016_gazebo_iris
-	10017_jmavsim_iris
-	10018_gazebo_iris_foggy_lidar
-	10019_gazebo_omnicopter
-	10030_gazebo_px4vision
-	10040_sihsim_quadx
-	10041_sihsim_airplane
-	10042_sihsim_xvert
-
-	17001_flightgear_tf-g1
-	17002_flightgear_tf-g2
+	10016_iris
+	10018_iris_foggy_lidar
+	10019_omnicopter
+	10030_px4vision
+	10040_quadx
+	10041_airplane
+	10042_xvert
+	1010_iris_opt_flow
+	1010_iris_opt_flow.post
+	1011_iris_irlock
+	1012_iris_rplidar
+	1013_iris_vision
+	1013_iris_vision.post
+	1015_iris_obs_avoid
+	1015_iris_obs_avoid.post
+	1017_iris_opt_flow_mockup
+	1018_iris_vision_velocity
+	1019_iris_dual_gps
+	1021_uuv_hippocampus
+	1022_uuv_bluerov2_heavy
+	1030_plane
+	1031_plane_cam
+	1032_plane_catapult
+	1033_rascal
+	1034_rascal-electric
+	1035_techpod
+	1036_malolo
+	1037_believer
+	1038_glider
+	1040_standard_vtol
+	1041_tailsitter
+	1042_tiltrotor
+	1043_standard_vtol_drop
+	1044_plane_lidar
+	1060_rover
+	1061_r1_rover
+	1062_tf-r1
+	1070_boat
+	3010_quadrotor_x
+	3011_hexarotor_x
+	17001_tf-g1
+	17002_tf-g2
+	2507_cloudship
+	6011_typhoon_h480
+	6011_typhoon_h480.post
 )

ROMFS/px4fmu_common/init.d-posix/px4-rc.mavlink

@@ -32,7 +32,7 @@ mavlink start -x -u $udp_onboard_payload_port_local -r 4000 -f -m onboard -o $ud
 mavlink start -x -u $udp_onboard_gimbal_port_local -r 400000 -m gimbal -o $udp_onboard_gimbal_port_remote
 
 # To display for SIH sitl
-if [ "$PX4_SIMULATOR" = "sihsim" ]; then
+if [ "$SIM_MODE" = "sihsim" ]; then
 	udp_sihsim_port_local=$((19450+px4_instance))
 	udp_sihsim_port_remote=$((19410+px4_instance))
 	mavlink start -x -u $udp_sihsim_port_local -r 400000 -m custom -o $udp_sihsim_port_remote

ROMFS/px4fmu_common/init.d-posix/px4-rc.rtps

@@ -1,4 +1,5 @@
 #!/bin/sh
 # shellcheck disable=SC2154
 
-micrortps_client start -t UDP -r $((2019+2*px4_instance)) -s $((2020+2*px4_instance))
+#micrortps_client start -t UDP -r $((2019+2*px4_instance)) -s $((2020+2*px4_instance))
+microdds_client start -t udp -p 15555

ROMFS/px4fmu_common/init.d-posix/px4-rc.simulator

@@ -1,85 +1,20 @@
 #!/bin/sh
 # shellcheck disable=SC2154
 
-# Simulator IMU data provided at 250 Hz
-param set-default IMU_INTEG_RATE 250
-
-if [ "$PX4_SIMULATOR" = "sihsim" ] || [ "$(param show -q SYS_AUTOSTART)" -eq "0" ]; then
-
-	echo "INFO  [init] SIH simulator"
-
-	if ! simulator_sih start; then
-		echo "ERROR  [init] simulator_sih failed to start"
-		exit 1
-	fi
-
-elif [ "$PX4_SIMULATOR" = "ignition" ]; then
-
-	echo "INFO  [init] Ignition Gazebo simulator"
-
-	# source generated gazebo_env.sh for IGN_GAZEBO_RESOURCE_PATH
-	if [ -f gazebo_env.sh ]; then
-		. ./gazebo_env.sh
-	elif [ -f ../gazebo_env.sh ]; then
-		. ../gazebo_env.sh
-	fi
-
-	if ! ign service --info --service /world/${PX4_SIM_WORLD}/create | grep "ignition.msgs.EntityFactory"; then
-		# starting ign gazebo with ${PX4_SIM_WORLD} world
-		echo "INFO  [init] starting ign gazebo"
-
-		if [ -z $HEADLESS ]; then
-			ign gazebo --verbose=1 -r "${PX4_IGN_GAZEBO_WORLDS}/${PX4_SIM_WORLD}.sdf" &
-		else
-			# starting ign gazebo headless
-			ign gazebo --verbose=1 -r -s "${PX4_IGN_GAZEBO_WORLDS}/${PX4_SIM_WORLD}.sdf" &
-		fi
-	else
-		echo "INFO  [init] ign gazebo already running"
-	fi
-
-	if simulator_ignition_bridge start -m "${PX4_SIM_MODEL#*ign_}" -w "${PX4_SIM_WORLD}"; then
-		sensor_baro_sim start
-		sensor_gps_sim start
-		sensor_mag_sim start
-	else
-		echo "ERROR  [init] ign gazebo failed to start"
-		exit 1
-	fi
-
-elif [ "$PX4_SIM_MODEL" = "jmavsim_iris" ] || [ "$PX4_SIMULATOR" = "jmavsim" ]; then
-
-	echo "INFO  [init] jMAVSim simulator"
-
-	if jps | grep -i jmavsim; then
-		kill $(jps | grep -i jmavsim | awk '{print $1}') || true
-		sleep 1
-	fi
-
-	./jmavsim_run.sh -l -r 250 &
-
-	simulator_mavlink start -h localhost $((4560+px4_instance))
+simulator_tcp_port=$((4560+px4_instance))
 
+# Check if PX4_SIM_HOSTNAME environment variable is empty
+# If empty check if PX4_SIM_HOST_ADDR environment variable is empty
+# If both are empty use localhost for simulator
+if [ -z "${PX4_SIM_HOSTNAME}" ]; then
+  if [ -z "${PX4_SIM_HOST_ADDR}" ]; then
+    echo "PX4 SIM HOST: localhost"
+    simulator start -c $simulator_tcp_port
+  else
+    echo "PX4 SIM HOST: $PX4_SIM_HOST_ADDR"
+    simulator start -t $PX4_SIM_HOST_ADDR $simulator_tcp_port
+  fi
 else
-	# otherwise start simulator (mavlink) module
-	simulator_tcp_port=$((4560+px4_instance))
-
-	# Check if PX4_SIM_HOSTNAME environment variable is empty
-	# If empty check if PX4_SIM_HOST_ADDR environment variable is empty
-	# If both are empty use localhost for simulator
-	if [ -z "${PX4_SIM_HOSTNAME}" ]; then
-
-		if [ -z "${PX4_SIM_HOST_ADDR}" ]; then
-			echo "INFO  [init] PX4_SIM_HOSTNAME: localhost"
-			simulator_mavlink start -c $simulator_tcp_port
-		else
-			echo "INFO  [init] PX4_SIM_HOSTNAME: $PX4_SIM_HOST_ADDR"
-			simulator_mavlink start -t $PX4_SIM_HOST_ADDR $simulator_tcp_port
-		fi
-
-	else
-		echo "INFO  [init] PX4_SIM_HOSTNAME: $PX4_SIM_HOSTNAME"
-		simulator_mavlink start -h $PX4_SIM_HOSTNAME $simulator_tcp_port
-	fi
-
+  echo "PX4 SIM HOST: $PX4_SIM_HOSTNAME"
+  simulator start -h $PX4_SIM_HOSTNAME $simulator_tcp_port
 fi

ROMFS/px4fmu_common/init.d-posix/rcS

@@ -1,6 +1,6 @@
 #!/bin/sh
 
-#set -e
+set -e
 
 # PX4 commands need the 'px4-' prefix in bash.
 # (px4-alias.sh is expected to be in the PATH)
@@ -30,7 +30,6 @@ set MIXER_FILE                  none
 set OUTPUT_MODE                 sim
 set EXTRA_MIXER_MODE            none
 set PWM_OUT                     none
-set PWM_AUX_OUT                 none
 set SDCARD_MIXERS_PATH          etc/mixers
 set USE_IO                      no
 set VEHICLE_TYPE                none
@@ -39,24 +38,10 @@ set LOGGER_BUF                  1000
 
 set RUN_MINIMAL_SHELL           no
 
-set SYS_AUTOSTART=0
-
-if [ "$PX4_SIM_MODEL" = "shell" ]
-then
+# Use the variable set by sitl_run.sh to choose the model settings.
+if [ "$PX4_SIM_MODEL" = "shell" ]; then
 	set RUN_MINIMAL_SHELL yes
-
-elif [ -n "$PX4_SYS_AUTOSTART" ]
-then
-	echo "env SYS_AUTOSTART: ${PX4_SYS_AUTOSTART}"
-	SYS_AUTOSTART=${PX4_SYS_AUTOSTART}
-
-elif [ "$PX4_SIM_MODEL" = "none" ] || [ -z $PX4_SIM_MODEL ]
-then
-	# no airframe selected
-	SYS_AUTOSTART=0
-
-elif [ -n "$PX4_SIM_MODEL" ]
-then
+else
 	# Find the matching Autostart ID (file name has the form: [0-9]+_${PX4_SIM_MODEL})
 	# TODO: unify with rc.autostart generation
 	# shellcheck disable=SC2012
@@ -65,13 +50,12 @@ then
 		echo "ERROR  [init] Unknown model $PX4_SIM_MODEL (not found by name on ${R}etc/init.d-posix/airframes)"
 		exit 1
 	else
-		SYS_AUTOSTART=$REQUESTED_AUTOSTART
 		echo "INFO  [init] found model autostart file as SYS_AUTOSTART=$REQUESTED_AUTOSTART"
 	fi
 fi
 
 # Load parameters
-set PARAM_FILE parameters.bson
+set PARAM_FILE eeprom/parameters_"$REQUESTED_AUTOSTART"
 param select $PARAM_FILE
 
 if [ -f $PARAM_FILE ]
@@ -82,16 +66,26 @@ then
 	else
 		echo "[param] FAILED loading $PARAM_FILE"
 	fi
+else
+	echo "[param] parameter file not found, creating $PARAM_FILE"
 fi
 
 # exit early when the minimal shell is requested
 [ $RUN_MINIMAL_SHELL = yes ] && exit 0
 
-if param compare SYS_AUTOSTART $SYS_AUTOSTART
-then
-	set AUTOCNF no
 
-elif [ "$SYS_AUTOSTART" -eq 0 ]
+# Use environment variable PX4_ESTIMATOR to choose estimator.
+if [ "$PX4_ESTIMATOR" = "q" ]; then
+	param set SYS_MC_EST_GROUP 3
+elif [ "$PX4_ESTIMATOR" = "ekf2" ]; then
+	param set SYS_MC_EST_GROUP 2
+elif [ "$PX4_ESTIMATOR" = "lpe" ]; then
+	param set SYS_MC_EST_GROUP 1
+elif [ "$PX4_ESTIMATOR" = "inav" ]; then
+	param set SYS_MC_EST_GROUP 0
+fi
+
+if param compare SYS_AUTOSTART $REQUESTED_AUTOSTART
 then
 	set AUTOCNF no
 else
@@ -112,7 +106,7 @@ param set MAV_SYS_ID $((px4_instance+1))
 
 if [ $AUTOCNF = yes ]
 then
-	param set SYS_AUTOSTART $SYS_AUTOSTART
+	param set SYS_AUTOSTART $REQUESTED_AUTOSTART
 
 	param set CAL_ACC0_ID  1310988 # 1310988: DRV_IMU_DEVTYPE_SIM, BUS: 1, ADDR: 1, TYPE: SIMULATION
 	param set CAL_GYRO0_ID 1310988 # 1310988: DRV_IMU_DEVTYPE_SIM, BUS: 1, ADDR: 1, TYPE: SIMULATION
@@ -149,7 +143,6 @@ param set-default EKF2_MULTI_MAG 2
 param set-default SENS_MAG_MODE 0
 
 param set-default IMU_GYRO_FFT_EN 1
-param set-default MAV_PROTO_VER 2 # Ensures QGC does not drop the first few packets after a SITL restart due to MAVLINK 1 packets
 
 param set-default -s MC_AT_EN 1
 
@@ -197,28 +190,28 @@ do
 			;;
 	esac
 done
-
-if [ -e "$autostart_file" ]
-then
-	. "$autostart_file"
-
-elif [ ! -e "$autostart_file" ] && [ "$SYS_AUTOSTART" -ne "0" ]
-then
+if [ ! -e "$autostart_file" ]; then
 	echo "Error: no autostart file found ($autostart_file)"
 	exit 1
 fi
 
+. "$autostart_file"
+
+# Simulator IMU data provided at 250 Hz
+param set IMU_INTEG_RATE 250
+
 #user defined params for instances can be in PATH
 . px4-rc.params
 
 dataman start
-
+# start sih in sih_sim mode, otherwise simulator module
+if [ "$SIM_MODE" = "sihsim" ]; then
+	sih start
 # only start the simulator if not in replay mode, as both control the lockstep time
-if ! replay tryapplyparams
+elif ! replay tryapplyparams
 then
-	. px4-rc.simulator
+  . px4-rc.simulator
 fi
-
 load_mon start
 battery_simulator start
 tone_alarm start
@@ -235,6 +228,12 @@ commander start
 
 navigator start
 
+# Try to start the microdds_client with UDP transport if module exists
+if px4-microdds_client status > /dev/null 2>&1
+then
+	microdds_client start -t udp -p 15555
+fi
+
 # Try to start the micrortps_client with UDP transport if module exists
 if px4-micrortps_client status > /dev/null 2>&1
 then

ROMFS/px4fmu_common/init.d/airframes/4019_x500_v2

@@ -1,35 +0,0 @@
-#!/bin/sh
-#
-# @name Holybro X500 V2
-#
-# @type Quadrotor x
-# @class Copter
-#
-# @maintainer Farhang Naderi <farhang.nba@gmail.com>
-#
-# @board px4_fmu-v2 exclude
-# @board bitcraze_crazyflie exclude
-#
-
-. ${R}etc/init.d/rc.mc_defaults
-
-param set-default IMU_GYRO_CUTOFF 30
-
-param set-default MC_ROLLRATE_P 0.14
-param set-default MC_PITCHRATE_P 0.14
-param set-default MC_ROLLRATE_I 0.3
-param set-default MC_PITCHRATE_I 0.3
-param set-default MC_ROLLRATE_D 0.004
-param set-default MC_PITCHRATE_D 0.004
-
-param set-default CA_ROTOR_COUNT 4
-param set-default CA_ROTOR0_PX 0.25
-param set-default CA_ROTOR0_PY 0.25
-param set-default CA_ROTOR1_PX -0.25
-param set-default CA_ROTOR1_PY -0.25
-param set-default CA_ROTOR2_PX 0.25
-param set-default CA_ROTOR2_PY -0.25
-param set-default CA_ROTOR2_KM -0.05
-param set-default CA_ROTOR3_PX -0.25
-param set-default CA_ROTOR3_PY 0.25
-param set-default CA_ROTOR3_KM -0.05

ROMFS/px4fmu_common/init.d/airframes/4061_atl_mantis_edu

@@ -73,7 +73,7 @@ param set-default EKF2_PCOEF_YN -0.4
 param set-default EKF2_PCOEF_YP -0.4
 
 param set-default EKF2_RNG_A_VMAX 1.0
-param set-default EKF2_RNG_CTRL 0
+param set-default EKF2_RNG_AID 0
 param set-default EKF2_RNG_DELAY 55
 param set-default EKF2_RNG_POS_X -0.035
 param set-default EKF2_RNG_POS_Y 0.0

ROMFS/px4fmu_common/init.d/airframes/4071_ifo

@@ -38,7 +38,7 @@ param set-default SENS_BOARD_ROT 10
 
 # EKF2
 param set-default EKF2_GND_EFF_DZ 6
-param set-default EKF2_HGT_REF 1
+param set-default EKF2_HGT_MODE 1
 
 # Position control
 param set-default MPC_Z_P 1

ROMFS/px4fmu_common/init.d/airframes/4073_ifo-s

@@ -42,7 +42,7 @@ param set-default SENS_EN_BATT 1
 # EKF2
 param set-default EKF2_AID_MASK 3
 param set-default EKF2_GND_EFF_DZ 6
-param set-default EKF2_HGT_REF 1
+param set-default EKF2_HGT_MODE 1
 param set-default EKF2_MIN_RNG 0.3
 
 # Flow

ROMFS/px4fmu_common/init.d/airframes/4900_crazyflie

@@ -26,8 +26,7 @@ param set-default COM_RC_IN_MODE 1
 
 param set-default EKF2_ABL_LIM 2
 param set-default EKF2_AID_MASK 3
-param set-default EKF2_HGT_REF 2
-param set-default EKF2_RNG_CTRL 2
+param set-default EKF2_HGT_MODE 2
 param set-default EKF2_MAG_TYPE 1
 param set-default EKF2_OF_DELAY 10
 

ROMFS/px4fmu_common/init.d/airframes/4901_crazyflie21

@@ -20,7 +20,6 @@
 param set-default SYS_MC_EST_GROUP 2
 param set-default SYS_HAS_MAG 0
 param set-default EKF2_AID_MASK 2
-param set-default EKF2_GPS_CTRL 0
 param set-default EKF2_MAG_TYPE 5
 
 param set-default BAT1_N_CELLS 1

ROMFS/px4fmu_common/init.d/airframes/6002_draco_r

@@ -71,7 +71,7 @@ param set-default MIS_TAKEOFF_ALT 1.1
 # EKF
 #####################################
 # Height mode as GPS
-param set-default EKF2_HGT_REF 1
+param set-default EKF2_HGT_MODE 1
 # Enable optical flow and GPS
 param set-default EKF2_MAG_TYPE 1
 param set-default EKF2_OF_QMIN 80

ROMFS/px4fmu_common/init.d/airframes/CMakeLists.txt

@@ -56,7 +56,6 @@ px4_add_romfs_files(
 	4015_holybro_s500
 	4016_holybro_px4vision
 	4017_nxp_hovergames
-	4019_x500_v2
 	4040_reaper
 	4041_beta75x
 	4050_generic_250

ROMFS/px4fmu_common/init.d/rcS

@@ -368,7 +368,7 @@ else
 		# start the simulator in hardware if needed
 		if param compare SYS_HITL 2
 		then
-			simulator_sih start
+			sih start
 		fi
 
 	else

ROMFS/px4fmu_common/mixers/AAERTWF.main.mix

@@ -1,4 +1,3 @@
-# @board px4_fmu-v2 exclude
 Aileron/rudder/elevator/throttle/wheel/flaps mixer for PX4FMU
 =======================================================
 

ROMFS/px4fmu_common/mixers/AAVVTWFF.main.mix

@@ -1,4 +1,3 @@
-# @board px4_fmu-v2 exclude
 Aileron/v-tail/throttle/wheel/flaps mixer for PX4FMU
 =======================================================
 

ROMFS/px4fmu_common/mixers/AAVVTWFF_vtail.main.mix

@@ -1,4 +1,3 @@
-# @board px4_fmu-v2 exclude
 Aileron/v-tail/throttle/wheel/flaps mixer for PX4FMU
 =======================================================
 

ROMFS/px4fmu_common/mixers/AERT.main.mix

@@ -1,4 +1,3 @@
-# @board px4_fmu-v2 exclude
 Aileron/rudder/elevator/throttle mixer for PX4FMU
 ==================================================
 
@@ -74,4 +73,4 @@ Ch6: Landing gear mixer
 By default pass-through of gear switch
 
 M: 1
-S: 3 5 10000 10000 0 -10000 10000
+S: 3 5 10000 10000 0 -10000 10000

ROMFS/px4fmu_common/mixers/AETRFG.main.mix

@@ -1,4 +1,3 @@
-# @board px4_fmu-v2 exclude
 Aileron/Elevator/Throttle/Rudder/Gear/Flaps mixer
 ==================================================
 

ROMFS/px4fmu_common/mixers/CCPM.main.mix

@@ -1,4 +1,3 @@
-# @board px4_fmu-v2 exclude
 Helicopter 120 degree Cyclic-Collective-Pitch Mixing (CCPM) for PX4FMU
 ==================================================
 

ROMFS/px4fmu_common/mixers/IO_pass.main.mix

@@ -1,4 +1,3 @@
-# @board px4_fmu-v2 exclude
 Passthrough mixer for PX4IO
 ============================
 

ROMFS/px4fmu_common/mixers/coax.main.mix

@@ -1,4 +1,3 @@
-# @board px4_fmu-v2 exclude
 Coaxial helicopter mixer
 - Two servomotors act on the swashplate (90 degree angle on the swashplate, decoupled effect on roll and pitch).
 - No collective pitch.

ROMFS/px4fmu_common/mixers/fw_generic_wing.main.mix

@@ -1,4 +1,3 @@
-# @board px4_fmu-v2 exclude
 Generic wing mixer
 ===========================
 

ROMFS/px4fmu_common/mixers/generic_diff_rover.main.mix

@@ -1,4 +1,3 @@
-# @board px4_fmu-v2 exclude
 Generic differential-drive rover
 ===========================
 

ROMFS/px4fmu_common/mixers/hexa_+.main.mix

@@ -1,4 +1,3 @@
-# @board px4_fmu-v2 exclude
 # Hexa +
 
 R: 6+

ROMFS/px4fmu_common/mixers/hexa_cox.main.mix

@@ -1,4 +1,3 @@
-# @board px4_fmu-v2 exclude
 # Hexa coaxial
 
 R: 6c

ROMFS/px4fmu_common/mixers/hexa_x.main.mix

@@ -1,4 +1,3 @@
-# @board px4_fmu-v2 exclude
 # Hexa X
 
 R: 6x

ROMFS/px4fmu_common/mixers/mount.aux.mix

@@ -1,4 +1,3 @@
-# @board px4_fmu-v2 exclude
 # Mount Mixer (e.g. Gimbal, servo-controlled gimbal, etc...)
 
 

ROMFS/px4fmu_common/mixers/octo_+.main.mix

@@ -1,4 +1,3 @@
-# @board px4_fmu-v2 exclude
 # Octo +
 
 R: 8+

ROMFS/px4fmu_common/mixers/octo_cox.main.mix

@@ -1,4 +1,3 @@
-# @board px4_fmu-v2 exclude
 # Octo coaxial
 
 R: 8c