Rover module: Temp

Add differential drive control module to all targets that have rover support
Differential Rover: PR fixes
2026-05-26 09:27:38 +08:00 · 2023-12-19 15:04:34 +01:00 · 2023-12-19 11:55:52 +01:00 · 2023-12-19 11:54:41 +01:00 · 2023-12-19 11:39:36 +01:00 · 2023-12-19 11:37:08 +01:00
578 changed files with 9024 additions and 19986 deletions
@@ -0,0 +1 @@
+--ignore-dir=Documentation
@@ -40,16 +40,16 @@ pipeline {
                     "ark_can-flow_default",
                     "ark_can-gps_canbootloader",
                     "ark_can-gps_default",
-                     "ark_can-rtk-gps_canbootloader",
-                     "ark_can-rtk-gps_default",
                     "ark_cannode_canbootloader",
                     "ark_cannode_default",
+                     "ark_can-rtk-gps_canbootloader",
+                     "ark_can-rtk-gps_default",
                     "ark_fmu-v6x_bootloader",
                     "ark_fmu-v6x_default",
                     "atl_mantis-edu_default",
                     "av_x-v1_default",
-                     "bitcraze_crazyflie21_default",
                     "bitcraze_crazyflie_default",
+                     "bitcraze_crazyflie21_default",
                     "cuav_can-gps-v1_canbootloader",
                     "cuav_can-gps-v1_default",
                     "cuav_nora_default",
@@ -66,8 +66,8 @@ pipeline {
                     "holybro_durandal-v1_default",
                     "holybro_kakutef7_default",
                     "holybro_kakuteh7_default",
-                     "holybro_kakuteh7mini_default",
                     "holybro_kakuteh7v2_default",
+                     "holybro_kakuteh7mini_default",
                     "holybro_pix32v5_default",
                     "matek_gnss-m9n-f4_canbootloader",
                     "matek_gnss-m9n-f4_default",
@@ -77,8 +77,8 @@ pipeline {
                     "modalai_fc-v1_default",
                     "modalai_fc-v2_default",
                     "mro_ctrl-zero-classic_default",
-                     "mro_ctrl-zero-f7-oem_default",
                     "mro_ctrl-zero-f7_default",
+                     "mro_ctrl-zero-f7-oem_default",
                     "mro_ctrl-zero-h7-oem_default",
                     "mro_ctrl-zero-h7_default",
                     "mro_pixracerpro_default",
@@ -104,28 +104,22 @@ pipeline {
                     "px4_fmu-v5_debug",
                     "px4_fmu-v5_default",
                     "px4_fmu-v5_lto",
-                     "px4_fmu-v5_rover",
                     "px4_fmu-v5_stackcheck",
                     "px4_fmu-v5_uavcanv0periph",
                     "px4_fmu-v5x_default",
-                     "px4_fmu-v5x_rover",
                     "px4_fmu-v6c_default",
-                     "px4_fmu-v6c_rover",
                     "px4_fmu-v6u_default",
-                     "px4_fmu-v6u_rover",
                     "px4_fmu-v6x_default",
-                     "px4_fmu-v6x_rover",
                     "px4_fmu-v6xrt_bootloader",
                     "px4_fmu-v6xrt_default",
-                     "px4_fmu-v6xrt_rover",
                     "px4_io-v2_default",
                     "raspberrypi_pico_default",
-                     "siyi_n7_default"
                     "sky-drones_smartap-airlink_default",
                     "spracing_h7extreme_default",
                     "thepeach_k1_default",
                     "thepeach_r1_default",
                     "uvify_core_default",
+                     "siyi_n7_default"
            ],
            image: docker_images.nuttx,
            archive: true
@@ -25,7 +25,6 @@ jobs:
          ark_can-rtk-gps,
          ark_cannode,
          ark_fmu-v6x,
-          ark_septentrio-gps,
          atl_mantis-edu,
          av_x-v1,
          bitcraze_crazyflie,
@@ -49,7 +48,6 @@ jobs:
          matek_h743-slim,
          modalai_fc-v1,
          modalai_fc-v2,
-          mro_ctrl-zero-classic,
          mro_ctrl-zero-f7,
          mro_ctrl-zero-f7-oem,
          mro_ctrl-zero-h7,
@@ -0,0 +1,33 @@
+# How to install:
+#   gem install github_changelog_generator
+# How to run:
+#   github_changelog_generator -u PX4 -p Firmware
+# Description:
+#   The following params are sensible defaults for the PX4 project,
+#   if you want to do a changelog before a release you need to update since-tag and future-releases,
+
+# Params:
+#   github_changelog_generator --help for all options
+
+# max-issues
+#   max threshold for github api queries
+#   make sure you set your CHANGELOG_GITHUB_TOKEN before
+#   running
+max-issues=1500
+
+# exclude-tags-regex
+#   excludes release candidates
+exclude-tags-regex=rc[0-9]{1,}|beta[0-9]{1,}
+
+# since-tag
+#   version of last stable release
+#   you need to change this depending on what you need
+#   if you want a changelog between versions this is the lowest version
+since-tag=1.6.5
+
+# future-release
+#   version you are about to release
+#   if you want a changelog between a version and all unreleased changes grouped as a release
+#     eg: v1.6.5 to v1.7.0
+future-release=v1.7.0
+
@@ -79,7 +79,3 @@
 [submodule "Tools/simulation/gz"]
 	path = Tools/simulation/gz
 	url = https://github.com/PX4/PX4-gazebo-models.git
-	branch = main
-[submodule "boards/modalai/voxl2/libfc-sensor-api"]
-	path = src/modules/muorb/apps/libfc-sensor-api
-	url = https://gitlab.com/voxl-public/voxl-sdk/core-libs/libfc-sensor-api.git
@@ -0,0 +1,35 @@
+language: cpp
+
+git:
+  depth: 100
+  submodules: false
+
+matrix:
+  fast_finish: true
+  include:
+    - os: linux
+      dist: xenial
+      # In order to stay under the coverity rate limit, we only run this weekly
+      # and not on push which is configured in travis-ci settings.
+      if: branch = main
+
+before_install:
+    - echo -n | openssl s_client -connect scan.coverity.com:443 | sed -ne '/-BEGIN CERTIFICATE-/,/-END CERTIFICATE-/p' | sudo tee -a /etc/ssl/certs/ca-
+
+install:
+    - export PATH=$HOME/.local/bin:$PATH
+    - pip install --user --upgrade pip
+    - pip install --user -r Tools/setup/requirements.txt
+
+script:
+    - make
+
+addons:
+  coverity_scan:
+    project:
+      name: "PX4/Firmware"
+      description: "Build submitted via Travis CI"
+    notification_email: ci@px4.io
+    build_command_prepend: "make distclean"
+    build_command: "make px4_sitl_default"
+    branch_pattern: coverity_scan
@@ -71,26 +71,6 @@ CONFIG:
      buildType: MinSizeRel
      settings:
        CONFIG: px4_fmu-v5x_default
-    px4_fmu-v6c_default:
-      short: px4_fmu-v6c
-      buildType: MinSizeRel
-      settings:
-        CONFIG: px4_fmu-v6c_default
-    px4_fmu-v6c_bootloader:
-      short: px4_fmu-v6c_bootloader
-      buildType: MinSizeRel
-      settings:
-        CONFIG: px4_fmu-v6c_bootloader
-    px4_fmu-v6u_default:
-      short: px4_fmu-v6u
-      buildType: MinSizeRel
-      settings:
-        CONFIG: px4_fmu-v6u_default
-    px4_fmu-v6u_bootloader:
-      short: px4_fmu-v6u_bootloader
-      buildType: MinSizeRel
-      settings:
-        CONFIG: px4_fmu-v6u_bootloader
    px4_fmu-v6x_default:
      short: px4_fmu-v6x
      buildType: MinSizeRel
@@ -151,16 +131,6 @@ CONFIG:
      buildType: MinSizeRel
      settings:
        CONFIG: ark_can-rtk-gps_canbootloader
-    ark_septentrio_gps_default:
-      short: ark_septentrio_gps_default
-      buildType: MinSizeRel
-      settings:
-        CONFIG: ark_septentrio_gps_default
-    ark_septentrio_gps_canbootloader:
-      short: ark_septentrio_gps_canbootloader
-      buildType: MinSizeRel
-      settings:
-        CONFIG: ark_septentrio_gps_canbootloader
    ark_cannode_default:
      short: ark_cannode_default
      buildType: MinSizeRel
@@ -0,0 +1,172 @@
+# This file is NOT licensed under the GPLv3, which is the license for the rest
+# of YouCompleteMe.
+#
+# Here's the license text for this file:
+#
+# This is free and unencumbered software released into the public domain.
+#
+# Anyone is free to copy, modify, publish, use, compile, sell, or
+# distribute this software, either in source code form or as a compiled
+# binary, for any purpose, commercial or non-commercial, and by any
+# means.
+#
+# In jurisdictions that recognize copyright laws, the author or authors
+# of this software dedicate any and all copyright interest in the
+# software to the public domain. We make this dedication for the benefit
+# of the public at large and to the detriment of our heirs and
+# successors. We intend this dedication to be an overt act of
+# relinquishment in perpetuity of all present and future rights to this
+# software under copyright law.
+#
+# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+# EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
+# IN NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY CLAIM, DAMAGES OR
+# OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+# ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+# OTHER DEALINGS IN THE SOFTWARE.
+#
+# For more information, please refer to <http://unlicense.org/>
+
+import os
+import ycm_core
+
+# These are the compilation flags that will be used in case there's no
+# compilation database set (by default, one is not set).
+# CHANGE THIS LIST OF FLAGS. YES, THIS IS THE DROID YOU HAVE BEEN LOOKING FOR.
+flags = [
+'-Wall',
+'-Wextra',
+'-Werror',
+#'-Wc++98-compat',
+'-Wno-long-long',
+'-Wno-variadic-macros',
+'-fexceptions',
+'-DNDEBUG',
+# You 100% do NOT need -DUSE_CLANG_COMPLETER in your flags; only the YCM
+# source code needs it.
+#'-DUSE_CLANG_COMPLETER',
+# THIS IS IMPORTANT! Without a "-std=<something>" flag, clang won't know which
+# language to use when compiling headers. So it will guess. Badly. So C++
+# headers will be compiled as C headers. You don't want that so ALWAYS specify
+# a "-std=<something>".
+# For a C project, you would set this to something like 'c99' instead of
+# 'c++14'.
+'-std=c++14',
+# ...and the same thing goes for the magic -x option which specifies the
+# language that the files to be compiled are written in. This is mostly
+# relevant for c++ headers.
+# For a C project, you would set this to 'c' instead of 'c++'.
+'-x',
+'c++',
+'-undef', # get rid of standard definitions to allow us to include arm math header
+'-I', os.path.join(os.path.expanduser("~"),'gcc-arm-none-eabi-4_7-2013q3/arm-none-eabi/include'),
+'-I', 'Build/px4_io-v2_default.build/nuttx-export/include/',
+'-I', './NuttX/nuttx/arch/arm/include',
+'-include', './src/include/visibility.h',
+'-I', './src',
+'-I', './src/modules',
+'-I', './src/include',
+'-I', './src/lib',
+'-I', './NuttX',
+]
+
+
+# Set this to the absolute path to the folder (NOT the file!) containing the
+# compile_commands.json file to use that instead of 'flags'. See here for
+# more details: http://clang.llvm.org/docs/JSONCompilationDatabase.html
+#
+# Most projects will NOT need to set this to anything; you can just change the
+# 'flags' list of compilation flags. Notice that YCM itself uses that approach.
+compilation_database_folder = ''
+
+if os.path.exists( compilation_database_folder ):
+  database = ycm_core.CompilationDatabase( compilation_database_folder )
+else:
+  database = None
+
+SOURCE_EXTENSIONS = [ '.cpp', '.cxx', '.cc', '.c', '.m', '.mm' ]
+
+def DirectoryOfThisScript():
+  return os.path.dirname( os.path.abspath( __file__ ) )
+
+
+def MakeRelativePathsInFlagsAbsolute( flags, working_directory ):
+  if not working_directory:
+    return list( flags )
+  new_flags = []
+  make_next_absolute = False
+  path_flags = [ '-isystem', '-I', '-iquote', '--sysroot=' ]
+  for flag in flags:
+    new_flag = flag
+
+    if make_next_absolute:
+      make_next_absolute = False
+      if not flag.startswith( '/' ):
+        new_flag = os.path.join( working_directory, flag )
+
+    for path_flag in path_flags:
+      if flag == path_flag:
+        make_next_absolute = True
+        break
+
+      if flag.startswith( path_flag ):
+        path = flag[ len( path_flag ): ]
+        new_flag = path_flag + os.path.join( working_directory, path )
+        break
+
+    if new_flag:
+      new_flags.append( new_flag )
+  return new_flags
+
+
+def IsHeaderFile( filename ):
+  extension = os.path.splitext( filename )[ 1 ]
+  return extension in [ '.h', '.hxx', '.hpp', '.hh' ]
+
+
+def GetCompilationInfoForFile( filename ):
+  # The compilation_commands.json file generated by CMake does not have entries
+  # for header files. So we do our best by asking the db for flags for a
+  # corresponding source file, if any. If one exists, the flags for that file
+  # should be good enough.
+  if IsHeaderFile( filename ):
+    basename = os.path.splitext( filename )[ 0 ]
+    for extension in SOURCE_EXTENSIONS:
+      replacement_file = basename + extension
+      if os.path.exists( replacement_file ):
+        compilation_info = database.GetCompilationInfoForFile(
+          replacement_file )
+        if compilation_info.compiler_flags_:
+          return compilation_info
+    return None
+  return database.GetCompilationInfoForFile( filename )
+
+
+def FlagsForFile( filename, **kwargs ):
+  if database:
+    # Bear in mind that compilation_info.compiler_flags_ does NOT return a
+    # python list, but a "list-like" StringVec object
+    compilation_info = GetCompilationInfoForFile( filename )
+    if not compilation_info:
+      return None
+
+    final_flags = MakeRelativePathsInFlagsAbsolute(
+      compilation_info.compiler_flags_,
+      compilation_info.compiler_working_dir_ )
+
+    # NOTE: This is just for YouCompleteMe; it's highly likely that your project
+    # does NOT need to remove the stdlib flag. DO NOT USE THIS IN YOUR
+    # ycm_extra_conf IF YOU'RE NOT 100% SURE YOU NEED IT.
+    #try:
+    #  final_flags.remove( '-stdlib=libc++' )
+    #except ValueError:
+    #  pass
+  else:
+    relative_to = DirectoryOfThisScript()
+    final_flags = MakeRelativePathsInFlagsAbsolute( flags, relative_to )
+
+  return {
+    'flags': final_flags,
+    'do_cache': True
+  }
@@ -0,0 +1,83 @@
+{
+	"folders":
+	[
+		{
+			"path": ".",
+			"file_exclude_patterns":
+			[
+				"*.o",
+				"*.a",
+				"*.d",
+				".built",
+				".context",
+				".depend",
+				".config",
+				".version",
+				"Make.dep",
+				".configured",
+				"*.sublime-project",
+				"*.sublime-workspace",
+				".project",
+				".cproject",
+				"cscope.out"
+			],
+			"folder_exclude_patterns":
+			[
+				".settings",
+				"nuttx/arch/arm/src/board",
+				"nuttx/arch/arm/src/chip",
+				"build_*"
+			]
+		}
+	],
+	"settings":
+	{
+		"tab_size": 8,
+		"translate_tabs_to_spaces": false,
+		"highlight_line": true,
+		"AStyleFormatter":
+		{
+			"options_c":
+			{
+				"use_only_additional_options": true,
+				"additional_options_file": "${project_path}/Tools/astyle/astylerc"
+			},
+			"options_c++":
+			{
+				"use_only_additional_options": true,
+				"additional_options_file": "${project_path}/Tools/astyle/astylerc"
+			}
+		}
+	},
+	"build_systems":
+	[
+		{
+			"name": "PX4: make all",
+			"working_dir": "${project_path}",
+			"file_regex": "^(..[^:]*):([0-9]+):?([0-9]+)?:? (.*)$",
+			"cmd": ["make"],
+			"shell": true
+		},
+		{
+			"name": "PX4: make and upload",
+			"working_dir": "${project_path}",
+			"file_regex": "^(..[^:]*):([0-9]+):?([0-9]+)?:? (.*)$",
+			"cmd": ["make upload px4_fmu-v2_default -j8"],
+			"shell": true
+		},
+		{
+			"name": "PX4: make posix",
+			"working_dir": "${project_path}",
+			"file_regex": "^(..[^:]*):([0-9]+):?([0-9]+)?:? (.*)$",
+			"cmd": ["make posix"],
+			"shell": true
+		},
+		{
+			"name": "MindPX_V2: make and upload",
+			"working_dir": "${project_path}",
+			"file_regex": "^(..[^:]*):([0-9]+):?([0-9]+)?:? (.*)$",
+			"cmd": ["make upload mindpx-v2_default -j8"],
+			"shell": true
+		}
+	]
+}
@@ -22,17 +22,18 @@ param set-default CBRK_SUPPLY_CHK 894281
 # - without safety switch
 param set-default CBRK_IO_SAFETY 22027

-# Square quadrotor X PX4 numbering
 param set-default CA_ROTOR_COUNT 4
-param set-default CA_ROTOR0_PX 1
-param set-default CA_ROTOR0_PY 1
-param set-default CA_ROTOR1_PX -1
-param set-default CA_ROTOR1_PY -1
-param set-default CA_ROTOR2_PX 1
-param set-default CA_ROTOR2_PY -1
+param set-default CA_ROTOR0_PX 0.15
+param set-default CA_ROTOR0_PY 0.15
+param set-default CA_ROTOR0_KM 0.05
+param set-default CA_ROTOR1_PX -0.15
+param set-default CA_ROTOR1_PY -0.15
+param set-default CA_ROTOR1_KM 0.05
+param set-default CA_ROTOR2_PX 0.15
+param set-default CA_ROTOR2_PY -0.15
 param set-default CA_ROTOR2_KM -0.05
-param set-default CA_ROTOR3_PX -1
-param set-default CA_ROTOR3_PY 1
+param set-default CA_ROTOR3_PX -0.15
+param set-default CA_ROTOR3_PY 0.15
 param set-default CA_ROTOR3_KM -0.05

 param set-default PWM_MAIN_FUNC1 101
@@ -26,7 +26,7 @@ param set-default CBRK_IO_SAFETY 22027

 param set-default BAT_N_CELLS 3

-param set-default SIH_T_MAX 6
+param set-default SIH_T_MAX 6.0
 param set-default SIH_MASS 0.3
 param set-default SIH_IXX 0.00402
 param set-default SIH_IYY 0.0144
@@ -45,9 +45,9 @@ param set-default CA_ROTOR_COUNT 1
 param set-default CA_SV_CS_COUNT 3
 param set-default CA_SV_CS0_TRQ_R -0.5
 param set-default CA_SV_CS0_TYPE 1
-param set-default CA_SV_CS1_TRQ_P 1
+param set-default CA_SV_CS1_TRQ_P 1.0
 param set-default CA_SV_CS1_TYPE 3
-param set-default CA_SV_CS2_TRQ_Y 1
+param set-default CA_SV_CS2_TRQ_Y 1.0
 param set-default CA_SV_CS2_TYPE 4
 param set-default PWM_MAIN_FUNC3 201
 param set-default PWM_MAIN_FUNC4 202
@@ -35,14 +35,14 @@ param set-default CBRK_IO_SAFETY 22027

 param set-default BAT_N_CELLS 3

-param set-default SIH_T_MAX 2
+param set-default SIH_T_MAX 2.0
 param set-default SIH_Q_MAX 0.0165
 param set-default SIH_MASS 0.2
 # IXX and IZZ are inverted from the thesis as the body frame is pitched by 90 deg
 param set-default SIH_IXX 0.00354
 param set-default SIH_IYY 0.000625
 param set-default SIH_IZZ 0.00300
-param set-default SIH_IXZ 0
+param set-default SIH_IXZ 0.0
 param set-default SIH_KDV 0.2
 param set-default SIH_L_ROLL 0.145

@@ -47,5 +47,5 @@ param set-default MPC_ALT_MODE 2

 param set-default SENS_FLOW_ROT 6
 param set-default SENS_FLOW_MINHGT 0.7
-param set-default SENS_FLOW_MAXHGT 3
+param set-default SENS_FLOW_MAXHGT 3.0
 param set-default SENS_FLOW_MAXR 2.5
@@ -8,34 +8,34 @@
 param set-default CA_AIRFRAME 7
 param set-default CA_ROTOR_COUNT 4
 param set-default CA_R_REV 255
-param set-default CA_ROTOR0_AX 1
-param set-default CA_ROTOR0_AY 0
-param set-default CA_ROTOR0_AZ 0
-param set-default CA_ROTOR0_KM 0
-param set-default CA_ROTOR0_PX 0
-param set-default CA_ROTOR0_PY -0.3
-param set-default CA_ROTOR0_PZ -0.3
-param set-default CA_ROTOR1_AX 1
-param set-default CA_ROTOR1_AY 0
-param set-default CA_ROTOR1_AZ 0
-param set-default CA_ROTOR1_KM 0
-param set-default CA_ROTOR1_PX 0
-param set-default CA_ROTOR1_PY 0.3
-param set-default CA_ROTOR1_PZ -0.3
-param set-default CA_ROTOR2_AX 1
-param set-default CA_ROTOR2_AY 0
-param set-default CA_ROTOR2_AZ 0
-param set-default CA_ROTOR2_KM 0
-param set-default CA_ROTOR2_PX 0
-param set-default CA_ROTOR2_PY 0.3
-param set-default CA_ROTOR2_PZ 0.3
-param set-default CA_ROTOR3_AX 1
-param set-default CA_ROTOR3_AY 0
-param set-default CA_ROTOR3_AZ 0
-param set-default CA_ROTOR3_KM 0
-param set-default CA_ROTOR3_PX 0
-param set-default CA_ROTOR3_PY -0.3
-param set-default CA_ROTOR3_PZ 0.3
+param set-default CA_ROTOR0_AX 1.0000
+param set-default CA_ROTOR0_AY 0.0000
+param set-default CA_ROTOR0_AZ 0.0000
+param set-default CA_ROTOR0_KM 0.0000
+param set-default CA_ROTOR0_PX 0.0000
+param set-default CA_ROTOR0_PY -0.3000
+param set-default CA_ROTOR0_PZ -0.3000
+param set-default CA_ROTOR1_AX 1.0000
+param set-default CA_ROTOR1_AY 0.0000
+param set-default CA_ROTOR1_AZ 0.0000
+param set-default CA_ROTOR1_KM 0.0000
+param set-default CA_ROTOR1_PX 0.0000
+param set-default CA_ROTOR1_PY 0.3000
+param set-default CA_ROTOR1_PZ -0.3000
+param set-default CA_ROTOR2_AX 1.0000
+param set-default CA_ROTOR2_AY 0.0000
+param set-default CA_ROTOR2_AZ 0.0000
+param set-default CA_ROTOR2_KM 0.0000
+param set-default CA_ROTOR2_PX 0.0000
+param set-default CA_ROTOR2_PY 0.3000
+param set-default CA_ROTOR2_PZ 0.3000
+param set-default CA_ROTOR3_AX 1.0000
+param set-default CA_ROTOR3_AY 0.0000
+param set-default CA_ROTOR3_AZ 0.0000
+param set-default CA_ROTOR3_KM 0.0000
+param set-default CA_ROTOR3_PX 0.0000
+param set-default CA_ROTOR3_PY -0.3000
+param set-default CA_ROTOR3_PZ 0.3000

 param set-default PWM_MAIN_FUNC1 101
 param set-default PWM_MAIN_FUNC2 102
@@ -9,49 +9,49 @@ param set-default CA_AIRFRAME 7

 param set-default CA_ROTOR_COUNT 8
 param set-default CA_R_REV 255
-param set-default CA_ROTOR0_AX 1
-param set-default CA_ROTOR0_AY -1
-param set-default CA_ROTOR0_AZ 0
-param set-default CA_ROTOR0_KM 0
-param set-default CA_ROTOR0_PX 0.5
-param set-default CA_ROTOR0_PY 0.3
-param set-default CA_ROTOR0_PZ 0.2
-param set-default CA_ROTOR1_AX 1
-param set-default CA_ROTOR1_AY 1
-param set-default CA_ROTOR1_AZ 0
-param set-default CA_ROTOR1_KM 0
-param set-default CA_ROTOR1_PX 0.5
-param set-default CA_ROTOR1_PY -0.3
-param set-default CA_ROTOR1_PZ 0.2
-param set-default CA_ROTOR2_AX 1
-param set-default CA_ROTOR2_AY 1
-param set-default CA_ROTOR2_AZ 0
-param set-default CA_ROTOR2_KM 0
-param set-default CA_ROTOR2_PX -0.5
-param set-default CA_ROTOR2_PY 0.3
-param set-default CA_ROTOR2_PZ 0.2
-param set-default CA_ROTOR3_AX 1
-param set-default CA_ROTOR3_AY -1
-param set-default CA_ROTOR3_AZ 0
-param set-default CA_ROTOR3_KM 0
-param set-default CA_ROTOR3_PX -0.5
-param set-default CA_ROTOR3_PY -0.3
-param set-default CA_ROTOR3_PZ 0.2
-param set-default CA_ROTOR4_AZ -1
-param set-default CA_ROTOR4_KM 0
-param set-default CA_ROTOR4_PX 0.5
-param set-default CA_ROTOR4_PY 0.5
-param set-default CA_ROTOR5_AZ 1
-param set-default CA_ROTOR5_KM 0
-param set-default CA_ROTOR5_PX 0.5
-param set-default CA_ROTOR5_PY -0.5
-param set-default CA_ROTOR6_AZ 1
-param set-default CA_ROTOR6_KM 0
-param set-default CA_ROTOR6_PX -0.5
-param set-default CA_ROTOR6_PY 0.5
-param set-default CA_ROTOR7_KM 0
-param set-default CA_ROTOR7_PX -0.5
-param set-default CA_ROTOR7_PY -0.5
+param set-default CA_ROTOR0_AX 1.0000
+param set-default CA_ROTOR0_AY -1.0000
+param set-default CA_ROTOR0_AZ 0.0000
+param set-default CA_ROTOR0_KM 0.0000
+param set-default CA_ROTOR0_PX 0.5000
+param set-default CA_ROTOR0_PY 0.3000
+param set-default CA_ROTOR0_PZ 0.2000
+param set-default CA_ROTOR1_AX 1.0000
+param set-default CA_ROTOR1_AY 1.0000
+param set-default CA_ROTOR1_AZ 0.0000
+param set-default CA_ROTOR1_KM 0.0000
+param set-default CA_ROTOR1_PX 0.5000
+param set-default CA_ROTOR1_PY -0.3000
+param set-default CA_ROTOR1_PZ 0.2000
+param set-default CA_ROTOR2_AX 1.0000
+param set-default CA_ROTOR2_AY 1.0000
+param set-default CA_ROTOR2_AZ 0.0000
+param set-default CA_ROTOR2_KM 0.0000
+param set-default CA_ROTOR2_PX -0.5000
+param set-default CA_ROTOR2_PY 0.3000
+param set-default CA_ROTOR2_PZ 0.2000
+param set-default CA_ROTOR3_AX 1.0000
+param set-default CA_ROTOR3_AY -1.0000
+param set-default CA_ROTOR3_AZ 0.0000
+param set-default CA_ROTOR3_KM 0.0000
+param set-default CA_ROTOR3_PX -0.5000
+param set-default CA_ROTOR3_PY -0.3000
+param set-default CA_ROTOR3_PZ 0.2000
+param set-default CA_ROTOR4_AZ -1.0000
+param set-default CA_ROTOR4_KM 0.0000
+param set-default CA_ROTOR4_PX 0.5000
+param set-default CA_ROTOR4_PY 0.5000
+param set-default CA_ROTOR5_AZ 1.0000
+param set-default CA_ROTOR5_KM 0.0000
+param set-default CA_ROTOR5_PX 0.5000
+param set-default CA_ROTOR5_PY -0.5000
+param set-default CA_ROTOR6_AZ 1.0000
+param set-default CA_ROTOR6_KM 0.0000
+param set-default CA_ROTOR6_PX -0.5000
+param set-default CA_ROTOR6_PY 0.5000
+param set-default CA_ROTOR7_KM 0.0000
+param set-default CA_ROTOR7_PX -0.5000
+param set-default CA_ROTOR7_PY -0.5000

 param set-default PWM_MAIN_FUNC1 101
 param set-default PWM_MAIN_FUNC2 102
@@ -54,9 +54,9 @@ param set-default CA_SV_CS0_TRQ_R -0.5
 param set-default CA_SV_CS0_TYPE 1
 param set-default CA_SV_CS1_TRQ_R 0.5
 param set-default CA_SV_CS1_TYPE 2
-param set-default CA_SV_CS2_TRQ_P 1
+param set-default CA_SV_CS2_TRQ_P 1.0
 param set-default CA_SV_CS2_TYPE 3
-param set-default CA_SV_CS3_TRQ_Y 1
+param set-default CA_SV_CS3_TRQ_Y 1.0
 param set-default CA_SV_CS3_TYPE 4
 param set-default CA_SV_CS4_TYPE 9
 param set-default CA_SV_CS5_TYPE 10
@@ -57,9 +57,9 @@ param set-default CA_SV_CS0_TRQ_R -0.5
 param set-default CA_SV_CS0_TYPE 1
 param set-default CA_SV_CS1_TRQ_R 0.5
 param set-default CA_SV_CS1_TYPE 2
-param set-default CA_SV_CS2_TRQ_P 1
+param set-default CA_SV_CS2_TRQ_P 1.0
 param set-default CA_SV_CS2_TYPE 3
-param set-default CA_SV_CS3_TRQ_Y 1
+param set-default CA_SV_CS3_TRQ_Y 1.0
 param set-default CA_SV_CS3_TYPE 4
 param set-default CA_SV_CS4_TYPE 9
 param set-default CA_SV_CS5_TYPE 10
@@ -57,9 +57,9 @@ param set-default CA_SV_CS0_TRQ_R -0.5
 param set-default CA_SV_CS0_TYPE 1
 param set-default CA_SV_CS1_TRQ_R 0.5
 param set-default CA_SV_CS1_TYPE 2
-param set-default CA_SV_CS2_TRQ_P 1
+param set-default CA_SV_CS2_TRQ_P 1.0
 param set-default CA_SV_CS2_TYPE 3
-param set-default CA_SV_CS3_TRQ_Y 1
+param set-default CA_SV_CS3_TRQ_Y 1.0
 param set-default CA_SV_CS3_TYPE 4
 param set-default CA_SV_CS4_TYPE 9
 param set-default CA_SV_CS5_TYPE 10
@@ -42,9 +42,9 @@ param set-default CA_SV_CS0_TRQ_R -0.5
 param set-default CA_SV_CS0_TYPE 1
 param set-default CA_SV_CS1_TRQ_R 0.5
 param set-default CA_SV_CS1_TYPE 2
-param set-default CA_SV_CS2_TRQ_P 1
+param set-default CA_SV_CS2_TRQ_P 1.0
 param set-default CA_SV_CS2_TYPE 3
-param set-default CA_SV_CS3_TRQ_Y 1
+param set-default CA_SV_CS3_TRQ_Y 1.0
 param set-default CA_SV_CS3_TYPE 4
 param set-default CA_SV_CS4_TYPE 9
 param set-default CA_SV_CS5_TYPE 10
@@ -42,9 +42,9 @@ param set-default CA_SV_CS0_TRQ_R -0.5
 param set-default CA_SV_CS0_TYPE 1
 param set-default CA_SV_CS1_TRQ_R 0.5
 param set-default CA_SV_CS1_TYPE 2
-param set-default CA_SV_CS2_TRQ_P 1
+param set-default CA_SV_CS2_TRQ_P 1.0
 param set-default CA_SV_CS2_TYPE 3
-param set-default CA_SV_CS3_TRQ_Y 1
+param set-default CA_SV_CS3_TRQ_Y 1.0
 param set-default CA_SV_CS3_TYPE 4
 param set-default CA_SV_CS4_TYPE 9
 param set-default CA_SV_CS5_TYPE 10
@@ -40,9 +40,9 @@ param set-default CA_SV_CS0_TRQ_R -0.5
 param set-default CA_SV_CS0_TYPE 1
 param set-default CA_SV_CS1_TRQ_R 0.5
 param set-default CA_SV_CS1_TYPE 2
-param set-default CA_SV_CS2_TRQ_P 1
+param set-default CA_SV_CS2_TRQ_P 1.0
 param set-default CA_SV_CS2_TYPE 3
-param set-default CA_SV_CS3_TRQ_Y 1
+param set-default CA_SV_CS3_TRQ_Y 1.0
 param set-default CA_SV_CS3_TYPE 4
 param set-default CA_SV_CS4_TYPE 9
 param set-default CA_SV_CS5_TYPE 10
@@ -42,9 +42,9 @@ param set-default CA_SV_CS0_TRQ_R -0.5
 param set-default CA_SV_CS0_TYPE 1
 param set-default CA_SV_CS1_TRQ_R 0.5
 param set-default CA_SV_CS1_TYPE 2
-param set-default CA_SV_CS2_TRQ_P 1
+param set-default CA_SV_CS2_TRQ_P 1.0
 param set-default CA_SV_CS2_TYPE 3
-param set-default CA_SV_CS3_TRQ_Y 1
+param set-default CA_SV_CS3_TRQ_Y 1.0
 param set-default CA_SV_CS3_TYPE 4
 param set-default CA_SV_CS4_TYPE 9
 param set-default CA_SV_CS5_TYPE 10
@@ -48,9 +48,9 @@ param set-default CA_SV_CS0_TRQ_R -0.5
 param set-default CA_SV_CS0_TYPE 1
 param set-default CA_SV_CS1_TRQ_R 0.5
 param set-default CA_SV_CS1_TYPE 2
-param set-default CA_SV_CS2_TRQ_P 1
+param set-default CA_SV_CS2_TRQ_P 1.0
 param set-default CA_SV_CS2_TYPE 3
-param set-default CA_SV_CS3_TRQ_Y 1
+param set-default CA_SV_CS3_TRQ_Y 1.0
 param set-default CA_SV_CS3_TYPE 4
 param set-default CA_SV_CS4_TYPE 9
 param set-default CA_SV_CS5_TYPE 10
@@ -55,9 +55,9 @@ param set-default CA_SV_CS0_TRQ_R -0.5
 param set-default CA_SV_CS0_TYPE 1
 param set-default CA_SV_CS1_TRQ_R 0.5
 param set-default CA_SV_CS1_TYPE 2
-param set-default CA_SV_CS2_TRQ_P 1
+param set-default CA_SV_CS2_TRQ_P 1.0
 param set-default CA_SV_CS2_TYPE 3
-param set-default CA_SV_CS3_TRQ_Y 1
+param set-default CA_SV_CS3_TRQ_Y 1.0
 param set-default CA_SV_CS3_TYPE 4
 param set-default CA_SV_CS4_TYPE 9
 param set-default CA_SV_CS5_TYPE 10
@@ -47,9 +47,9 @@ param set-default CA_SV_CS0_TRQ_R -0.5
 param set-default CA_SV_CS0_TYPE 1
 param set-default CA_SV_CS1_TRQ_R 0.5
 param set-default CA_SV_CS1_TYPE 2
-param set-default CA_SV_CS2_TRQ_P 1
+param set-default CA_SV_CS2_TRQ_P 1.0
 param set-default CA_SV_CS2_TYPE 3
-param set-default CA_SV_CS3_TRQ_Y 1
+param set-default CA_SV_CS3_TRQ_Y 1.0
 param set-default CA_SV_CS3_TYPE 4
 param set-default CA_SV_CS4_TYPE 9
 param set-default CA_SV_CS5_TYPE 10
@@ -45,9 +45,9 @@ param set-default CA_SV_CS0_TRQ_R -0.5
 param set-default CA_SV_CS0_TYPE 1
 param set-default CA_SV_CS1_TRQ_R 0.5
 param set-default CA_SV_CS1_TYPE 2
-param set-default CA_SV_CS2_TRQ_P 1
+param set-default CA_SV_CS2_TRQ_P 1.0
 param set-default CA_SV_CS2_TYPE 3
-param set-default CA_SV_CS3_TRQ_Y 1
+param set-default CA_SV_CS3_TRQ_Y 1.0
 param set-default CA_SV_CS3_TYPE 4
 param set-default CA_SV_CS4_TYPE 9
 param set-default CA_SV_CS5_TYPE 10
@@ -27,8 +27,8 @@ param set-default CA_ROTOR2_KM -0.05
 param set-default CA_ROTOR3_PX -0.1515
 param set-default CA_ROTOR3_PY 0.1875
 param set-default CA_ROTOR3_KM -0.05
-param set-default CA_ROTOR4_AX 1
-param set-default CA_ROTOR4_AZ 0
+param set-default CA_ROTOR4_AX 1.0
+param set-default CA_ROTOR4_AZ 0.0
 param set-default CA_ROTOR4_PX 0.2

 param set-default CA_SV_CS_COUNT 3
@@ -37,7 +37,7 @@ param set-default CA_SV_CS0_TRQ_R -0.5
 param set-default CA_SV_CS1_TYPE 2
 param set-default CA_SV_CS1_TRQ_R 0.5
 param set-default CA_SV_CS2_TYPE 3
-param set-default CA_SV_CS2_TRQ_P 1
+param set-default CA_SV_CS2_TRQ_P 1.0
 param set-default PWM_MAIN_FUNC1 101
 param set-default PWM_MAIN_FUNC2 102
 param set-default PWM_MAIN_FUNC3 103
@@ -50,11 +50,11 @@ param set-default SENS_IMU_MODE 1

 param set-default FW_P_TC 0.6

-param set-default FW_PR_FF 0.0
+param set-default FW_PR_FF 0.1
 param set-default FW_PSP_OFF 2
 param set-default FW_RR_FF 0.1
 param set-default FW_RR_I 0.2
-param set-default FW_RR_P 0.5
+param set-default FW_RR_P 0.3
 param set-default FW_THR_TRIM 0.35
 param set-default FW_THR_MAX 0.8
 param set-default FW_THR_MIN 0.05
@@ -66,6 +66,8 @@ param set-default FW_T_SINK_MIN 1.6
 param set-default MC_AIRMODE 1
 param set-default MC_ROLL_P 3
 param set-default MC_PITCH_P 3
+param set-default MC_ROLLRATE_P 0.3
+param set-default MC_PITCHRATE_P 0.3

 param set-default VT_ARSP_TRANS 10
 param set-default VT_B_TRANS_DUR 5
@@ -31,7 +31,7 @@ param set-default CA_SV_CS0_TRQ_R -0.5
 param set-default CA_SV_CS0_TYPE 1
 param set-default CA_SV_CS1_TRQ_R 0.5
 param set-default CA_SV_CS1_TYPE 2
-param set-default CA_SV_CS2_TRQ_P 1
+param set-default CA_SV_CS2_TRQ_P 1.0
 param set-default CA_SV_CS2_TYPE 3
 param set-default CA_SV_CS_COUNT 3
 param set-default CA_SV_TL_COUNT 2
@@ -27,8 +27,8 @@ param set-default CA_ROTOR2_KM -0.05
 param set-default CA_ROTOR3_PX -0.1515
 param set-default CA_ROTOR3_PY 0.1875
 param set-default CA_ROTOR3_KM -0.05
-param set-default CA_ROTOR4_AX 1
-param set-default CA_ROTOR4_AZ 0
+param set-default CA_ROTOR4_AX 1.0
+param set-default CA_ROTOR4_AZ 0.0
 param set-default CA_ROTOR4_PX 0.2

 param set-default CA_SV_CS_COUNT 3
@@ -37,7 +37,7 @@ param set-default CA_SV_CS0_TRQ_R -0.5
 param set-default CA_SV_CS1_TYPE 2
 param set-default CA_SV_CS1_TRQ_R 0.5
 param set-default CA_SV_CS2_TYPE 3
-param set-default CA_SV_CS2_TRQ_P 1
+param set-default CA_SV_CS2_TRQ_P 1.0
 param set-default PWM_MAIN_FUNC1 101
 param set-default PWM_MAIN_FUNC2 102
 param set-default PWM_MAIN_FUNC3 103
@@ -57,9 +57,9 @@ param set-default CA_SV_CS0_TRQ_R -0.5
 param set-default CA_SV_CS0_TYPE 1
 param set-default CA_SV_CS1_TRQ_R 0.5
 param set-default CA_SV_CS1_TYPE 2
-param set-default CA_SV_CS2_TRQ_P 1
+param set-default CA_SV_CS2_TRQ_P 1.0
 param set-default CA_SV_CS2_TYPE 3
-param set-default CA_SV_CS3_TRQ_Y 1
+param set-default CA_SV_CS3_TRQ_Y 1.0
 param set-default CA_SV_CS3_TYPE 4
 param set-default CA_SV_CS4_TYPE 9
 param set-default CA_SV_CS5_TYPE 10
@@ -22,7 +22,7 @@ param set-default NAV_ACC_RAD 0.5
 param set-default NAV_LOITER_RAD 2

 param set-default GND_MAX_ANG 0.6
-param set-default GND_WHEEL_BASE 2
+param set-default GND_WHEEL_BASE 2.0

 param set-default CA_AIRFRAME 5

@@ -29,7 +29,7 @@ param set-default NAV_ACC_RAD 0.5
 param set-default NAV_LOITER_RAD 2

 param set-default GND_MAX_ANG 0.6
-param set-default GND_WHEEL_BASE 3
+param set-default GND_WHEEL_BASE 3.0

 param set-default CA_AIRFRAME 5

@@ -22,7 +22,7 @@ param set-default NAV_ACC_RAD 0.5
 param set-default NAV_LOITER_RAD 2

 param set-default GND_MAX_ANG 0.6
-param set-default GND_WHEEL_BASE 2
+param set-default GND_WHEEL_BASE 2.0

 param set-default CA_AIRFRAME 9

@@ -14,7 +14,7 @@

 param set-default FW_AIRSPD_STALL 8

-param set-default FW_P_RMAX_NEG 20
+param set-default FW_P_RMAX_NEG 20.0
 param set-default FW_W_RMAX 10
 param set-default FW_W_EN 1

@@ -37,7 +37,7 @@ param set-default FW_P_LIM_MAX 25
 param set-default FW_P_LIM_MIN -5
 param set-default FW_R_LIM 30

-param set-default FW_MAN_R_MAX 30
+param set-default FW_MAN_R_MAX 30.0

 param set-default FW_THR_TRIM 0.8
 param set-default FW_THR_IDLE 0
@@ -14,7 +14,7 @@

 param set-default FW_AIRSPD_STALL 5

-param set-default FW_P_RMAX_NEG 20
+param set-default FW_P_RMAX_NEG 20.0
 param set-default FW_W_RMAX 10
 param set-default FW_W_EN 1

@@ -29,9 +29,9 @@ param set-default NAV_LOITER_RAD 50
 # Parameters related to autogyro takeoff PR
 #param set-default AG_TKOFF 1
 #param set-default AG_PROT_TYPE 1
-#param set-default AG_PROT_MIN_RPM 50
-#param set-default AG_PROT_TRG_RPM 900
-#param set-defoult AG_ROTOR_RPM 900
+#param set-default AG_PROT_MIN_RPM 50.0
+#param set-default AG_PROT_TRG_RPM 900.0
+#param set-defoult AG_ROTOR_RPM 900.0

 param set-default FW_ARSP_SCALE_EN 0

@@ -42,7 +42,7 @@ param set-default FW_P_LIM_MAX 25
 param set-default FW_P_LIM_MIN -5
 param set-default FW_R_LIM 30

-param set-default FW_MAN_R_MAX 30
+param set-default FW_MAN_R_MAX 30.0

 param set-default FW_THR_CRUISE 0.8
 param set-default FW_THR_IDLE 0
@@ -14,21 +14,21 @@
 param set-default CA_AIRFRAME 9

 param set-default CA_ROTOR_COUNT 3
-param set-default CA_ROTOR0_AX 1
-param set-default CA_ROTOR0_AZ 0
-param set-default CA_ROTOR0_KM 0
-param set-default CA_ROTOR0_PY 2
-param set-default CA_ROTOR1_AX 1
-param set-default CA_ROTOR1_AZ 0
-param set-default CA_ROTOR1_KM 0
-param set-default CA_ROTOR1_PY -2
-param set-default CA_ROTOR2_AY -1
-param set-default CA_ROTOR2_AZ 0
-param set-default CA_ROTOR2_KM 0
-param set-default CA_ROTOR2_PX -10
+param set-default CA_ROTOR0_AX 1.0000
+param set-default CA_ROTOR0_AZ 0.0000
+param set-default CA_ROTOR0_KM 0.0000
+param set-default CA_ROTOR0_PY 2.0000
+param set-default CA_ROTOR1_AX 1.0000
+param set-default CA_ROTOR1_AZ 0.0000
+param set-default CA_ROTOR1_KM 0.0000
+param set-default CA_ROTOR1_PY -2.0000
+param set-default CA_ROTOR2_AY -1.0000
+param set-default CA_ROTOR2_AZ 0.0000
+param set-default CA_ROTOR2_KM 0.0000
+param set-default CA_ROTOR2_PX -10.0000

 param set-default CA_SV_CS_COUNT 1
-param set-default CA_SV_CS0_TRQ_P 1
+param set-default CA_SV_CS0_TRQ_P 1.0000

 param set-default CA_R_REV 7

@@ -13,9 +13,9 @@ param set-default MAV_TYPE 13

 param set-default MC_PITCHRATE_P 0.1
 param set-default MC_PITCHRATE_I 0.05
-param set-default MC_PITCH_P 6
+param set-default MC_PITCH_P 6.0
 param set-default MC_ROLLRATE_I 0.1
-param set-default MC_ROLL_P 6
+param set-default MC_ROLL_P 6.0
 param set-default MPC_XY_VEL_I_ACC 4
 param set-default MPC_XY_VEL_P_ACC 3

@@ -27,11 +27,11 @@ param set-default MNT_MODE_IN 4
 param set-default MNT_DO_STAB 2


-param set-default CA_ROTOR0_PX 0
-param set-default CA_ROTOR0_PY 1
+param set-default CA_ROTOR0_PX 0.0
+param set-default CA_ROTOR0_PY 1.0
 param set-default CA_ROTOR0_KM -0.05
-param set-default CA_ROTOR1_PX 0
-param set-default CA_ROTOR1_PY -1
+param set-default CA_ROTOR1_PX 0.0
+param set-default CA_ROTOR1_PY -1.0
 param set-default CA_ROTOR1_KM 0.05
 param set-default CA_ROTOR2_PX 0.866025
 param set-default CA_ROTOR2_PY -0.5
@@ -70,9 +70,9 @@ param set-default CA_SV_CS0_TRQ_R -0.5
 param set-default CA_SV_CS0_TYPE 1
 param set-default CA_SV_CS1_TRQ_R 0.5
 param set-default CA_SV_CS1_TYPE 2
-param set-default CA_SV_CS2_TRQ_P 1
+param set-default CA_SV_CS2_TRQ_P 1.0
 param set-default CA_SV_CS2_TYPE 3
-param set-default CA_SV_CS3_TRQ_Y 1
+param set-default CA_SV_CS3_TRQ_Y 1.0
 param set-default CA_SV_CS3_TYPE 4
 param set-default CA_SV_CS4_TYPE 9
 param set-default CA_SV_CS5_TYPE 10
@@ -40,8 +40,8 @@ param set-default CA_ROTOR2_KM -0.05
 param set-default CA_ROTOR3_PX -0.1515
 param set-default CA_ROTOR3_PY 0.1875
 param set-default CA_ROTOR3_KM -0.05
-param set-default CA_ROTOR4_AX 1
-param set-default CA_ROTOR4_AZ 0
+param set-default CA_ROTOR4_AX 1.0
+param set-default CA_ROTOR4_AZ 0.0
 param set-default CA_ROTOR4_PX 0.2

 param set-default SIM_GZ_EC_FUNC1 101
@@ -66,6 +66,7 @@ param set-default SIM_GZ_SV_FUNC2 202
 param set-default SIM_GZ_SV_FUNC3 203

 param set-default COM_RC_IN_MODE 1
+param set-default ASPD_PRIMARY 1

 param set-default CA_SV_CS_COUNT 3
 param set-default CA_SV_CS0_TYPE 1
@@ -73,7 +74,7 @@ param set-default CA_SV_CS0_TRQ_R -0.5
 param set-default CA_SV_CS1_TYPE 2
 param set-default CA_SV_CS1_TRQ_R 0.5
 param set-default CA_SV_CS2_TYPE 3
-param set-default CA_SV_CS2_TRQ_P 1
+param set-default CA_SV_CS2_TRQ_P 1.0

 param set-default NPFG_PERIOD 12
 param set-default FW_PR_FF 0.2
@@ -105,19 +105,31 @@ param set-default CBRK_IO_SAFETY 22027

 param set-default THR_MDL_FAC 0.3

-# Square quadrotor X PX4 numbering
 param set-default CA_ROTOR_COUNT 4
-param set-default CA_ROTOR0_PX 1
-param set-default CA_ROTOR0_PY 1
-param set-default CA_ROTOR1_PX -1
-param set-default CA_ROTOR1_PY -1
-param set-default CA_ROTOR2_PX 1
-param set-default CA_ROTOR2_PY -1
+param set-default CA_ROTOR0_PX 0.15
+param set-default CA_ROTOR0_PY 0.15
+param set-default CA_ROTOR0_KM 0.05
+param set-default CA_ROTOR1_PX -0.15
+param set-default CA_ROTOR1_PY -0.15
+param set-default CA_ROTOR1_KM 0.05
+param set-default CA_ROTOR2_PX 0.15
+param set-default CA_ROTOR2_PY -0.15
 param set-default CA_ROTOR2_KM -0.05
-param set-default CA_ROTOR3_PX -1
-param set-default CA_ROTOR3_PY 1
+param set-default CA_ROTOR3_PX -0.15
+param set-default CA_ROTOR3_PY 0.15
 param set-default CA_ROTOR3_KM -0.05

+# Outputs
+# param set-default PWM_AUX_FUNC1 101
+# param set-default PWM_AUX_FUNC2 102
+# param set-default PWM_AUX_FUNC3 103
+# param set-default PWM_AUX_FUNC4 104
+
+# param set-default PWM_MAIN_FUNC1 101
+# param set-default PWM_MAIN_FUNC2 102
+# param set-default PWM_MAIN_FUNC3 103
+# param set-default PWM_MAIN_FUNC4 104
+
 param set-default SIM_GZ_EC_FUNC1 101
 param set-default SIM_GZ_EC_FUNC2 102
 param set-default SIM_GZ_EC_FUNC3 103
@@ -132,3 +144,5 @@ param set-default SIM_GZ_EC_MAX1 1100
 param set-default SIM_GZ_EC_MAX2 1100
 param set-default SIM_GZ_EC_MAX3 1100
 param set-default SIM_GZ_EC_MAX4 1100
+
+
@@ -63,9 +63,9 @@ param set-default CA_SV_CS0_TRQ_R -0.5
 param set-default CA_SV_CS0_TYPE 1
 param set-default CA_SV_CS1_TRQ_R 0.5
 param set-default CA_SV_CS1_TYPE 2
-param set-default CA_SV_CS2_TRQ_P 1
+param set-default CA_SV_CS2_TRQ_P 1.0
 param set-default CA_SV_CS2_TYPE 3
-param set-default CA_SV_CS3_TRQ_Y 1
+param set-default CA_SV_CS3_TRQ_Y 1.0
 param set-default CA_SV_CS3_TYPE 4
 param set-default CA_SV_CS4_TYPE 9
 param set-default CA_SV_CS5_TYPE 10
@@ -9,14 +9,14 @@

 param set-default MAV_TYPE 13

-param set-default MC_PITCHRATE_P 0.08
-param set-default MC_PITCHRATE_I 0.04
-param set-default MC_PITCHRATE_D 0.001
-param set-default MC_PITCH_P 9
-param set-default MC_ROLLRATE_P 0.08
-param set-default MC_ROLLRATE_I 0.04
-param set-default MC_ROLLRATE_D 0.001
-param set-default MC_ROLL_P 9
+param set-default MC_PITCHRATE_P 0.0800
+param set-default MC_PITCHRATE_I 0.0400
+param set-default MC_PITCHRATE_D 0.0010
+param set-default MC_PITCH_P 9.0
+param set-default MC_ROLLRATE_P 0.0800
+param set-default MC_ROLLRATE_I 0.0400
+param set-default MC_ROLLRATE_D 0.0010
+param set-default MC_ROLL_P 9.0
 param set-default MPC_XY_VEL_I_ACC 4
 param set-default MPC_XY_VEL_P_ACC 3

@@ -31,11 +31,11 @@ param set-default MAV_PROTO_VER 2
 param set-default CA_AIRFRAME 0
 param set-default CA_ROTOR_COUNT 6

-param set-default CA_ROTOR0_PX 0
-param set-default CA_ROTOR0_PY 1
+param set-default CA_ROTOR0_PX 0.0
+param set-default CA_ROTOR0_PY 1.0
 param set-default CA_ROTOR0_KM -0.05
-param set-default CA_ROTOR1_PX 0
-param set-default CA_ROTOR1_PY -1
+param set-default CA_ROTOR1_PX 0.0
+param set-default CA_ROTOR1_PY -1.0
 param set-default CA_ROTOR1_KM 0.05
 param set-default CA_ROTOR2_PX 0.866025
 param set-default CA_ROTOR2_PY -0.5
@@ -41,6 +41,19 @@ elif [ "$PX4_SIMULATOR" = "gz" ] || [ "$(param show -q SIM_GZ_EN)" = "1" ]; then

 	echo "INFO  [init] Gazebo simulator"

+	# set local coordinate frame reference
+	if [ -n "${PX4_HOME_LAT}" ]; then
+		param set SIM_GZ_HOME_LAT ${PX4_HOME_LAT}
+	fi
+
+	if [ -n "${PX4_HOME_LON}" ]; then
+		param set SIM_GZ_HOME_LON ${PX4_HOME_LON}
+	fi
+
+	if [ -n "${PX4_HOME_ALT}" ]; then
+		param set SIM_GZ_HOME_ALT ${PX4_HOME_ALT}
+	fi
+
 	# Only start up Gazebo if PX4_GZ_STANDALONE is not set.
 	if [ -z "${PX4_GZ_STANDALONE}" ]; then

@@ -51,13 +64,6 @@ elif [ "$PX4_SIMULATOR" = "gz" ] || [ "$(param show -q SIM_GZ_EN)" = "1" ]; then
 			# "gz sim" from Garden on
 			gz_command="gz"
 			gz_sub_command="sim"
-
-			# Specify render engine if `GZ_SIM_RENDER_ENGINE` is set
-			# (for example, if you want to use Ogre 1.x instead of Ogre 2.x):
-			if [ -n "${PX4_GZ_SIM_RENDER_ENGINE}" ]; then
-				echo "INFO  [init] Setting Gazebo render engine to '${PX4_GZ_SIM_RENDER_ENGINE}'!"
-				gz_sub_command="${gz_sub_command} --render-engine ${PX4_GZ_SIM_RENDER_ENGINE}"
-			fi
 		else
 			echo "ERROR [init] Gazebo gz please install gz-garden"
 			exit 1
@@ -167,12 +173,6 @@ elif [ "$PX4_SIM_MODEL" = "jmavsim_iris" ] || [ "$(param show -q SYS_AUTOSTART)"

 else
 	# otherwise start simulator (mavlink) module
-
-	# EKF2 specifics
-	param set-default EKF2_GPS_DELAY 10
-	param set-default EKF2_MULTI_IMU 3
-	param set-default SENS_IMU_MODE 0
-
 	simulator_tcp_port=$((4560+px4_instance))

 	# Check if PX4_SIM_HOSTNAME environment variable is empty
@@ -153,6 +153,7 @@ fi

 param set-default BAT1_N_CELLS 4

+param set-default CBRK_AIRSPD_CHK 0
 param set-default CBRK_SUPPLY_CHK 894281

 # disable check, no CPU load reported on posix yet
@@ -164,6 +165,10 @@ param set-default COM_RC_IN_MODE 1
 # Speedup SITL startup
 param set-default EKF2_REQ_GPS_H 0.5

+# Multi-EKF
+param set-default EKF2_MULTI_IMU 3
+param set-default SENS_IMU_MODE 0
+
 param set-default IMU_GYRO_FFT_EN 1
 param set-default MAV_PROTO_VER 2 # Ensures QGC does not drop the first few packets after a SITL restart due to MAVLINK 1 packets

@@ -244,16 +249,11 @@ then
 fi

 load_mon start
-
-if param compare SIM_BAT_ENABLE 1
-then
-	battery_simulator start
-fi
-
+battery_simulator start
 tone_alarm start
 rc_update start
 manual_control start
-#sensors start
+sensors start
 commander start

 if ! pwm_out_sim start -m sim
@@ -11,30 +11,30 @@

 . ${R}etc/init.d/rc.mc_defaults

+
 param set SYS_HITL 1

 param set UAVCAN_ENABLE 0

-# disable some checks to allow to fly
-# - without real battery
-param set-default CBRK_SUPPLY_CHK 894281
-# - without safety switch
-param set-default CBRK_IO_SAFETY 22027
-
-# Square quadrotor X PX4 numbering
 param set-default CA_ROTOR_COUNT 4
-param set-default CA_ROTOR0_PX 1
-param set-default CA_ROTOR0_PY 1
-param set-default CA_ROTOR1_PX -1
-param set-default CA_ROTOR1_PY -1
-param set-default CA_ROTOR2_PX 1
-param set-default CA_ROTOR2_PY -1
+param set-default CA_ROTOR0_PX 0.15
+param set-default CA_ROTOR0_PY 0.15
+param set-default CA_ROTOR1_PX -0.15
+param set-default CA_ROTOR1_PY -0.15
+param set-default CA_ROTOR2_PX 0.15
+param set-default CA_ROTOR2_PY -0.15
 param set-default CA_ROTOR2_KM -0.05
-param set-default CA_ROTOR3_PX -1
-param set-default CA_ROTOR3_PY 1
+param set-default CA_ROTOR3_PX -0.15
+param set-default CA_ROTOR3_PY 0.15
 param set-default CA_ROTOR3_KM -0.05

 param set-default HIL_ACT_FUNC1 101
 param set-default HIL_ACT_FUNC2 102
 param set-default HIL_ACT_FUNC3 103
 param set-default HIL_ACT_FUNC4 104
+
+# disable some checks to allow to fly
+# - without real battery
+param set-default CBRK_SUPPLY_CHK 894281
+# - without safety switch
+param set-default CBRK_IO_SAFETY 22027
@@ -14,6 +14,7 @@

 . ${R}etc/init.d/rc.vtol_defaults

+
 param set-default BAT1_N_CELLS 3

 param set-default COM_RC_IN_MODE 1
@@ -54,29 +55,26 @@ param set-default VT_TYPE 2

 param set-default CA_AIRFRAME 2
 param set-default CA_ROTOR_COUNT 5
-param set-default CA_ROTOR4_AX 1
-param set-default CA_ROTOR4_AZ 0
-param set-default CA_ROTOR4_PX 0.2
-
-# Square quadrotor X PX4 numbering
-param set-default CA_ROTOR_COUNT 4
-param set-default CA_ROTOR0_PX 1
-param set-default CA_ROTOR0_PY 1
-param set-default CA_ROTOR1_PX -1
-param set-default CA_ROTOR1_PY -1
-param set-default CA_ROTOR2_PX 1
-param set-default CA_ROTOR2_PY -1
+param set-default CA_ROTOR0_PX 0.15
+param set-default CA_ROTOR0_PY 0.15
+param set-default CA_ROTOR1_PX -0.15
+param set-default CA_ROTOR1_PY -0.15
+param set-default CA_ROTOR2_PX 0.15
+param set-default CA_ROTOR2_PY -0.15
 param set-default CA_ROTOR2_KM -0.05
-param set-default CA_ROTOR3_PX -1
-param set-default CA_ROTOR3_PY 1
+param set-default CA_ROTOR3_PX -0.15
+param set-default CA_ROTOR3_PY 0.15
 param set-default CA_ROTOR3_KM -0.05
+param set-default CA_ROTOR4_AX 1.0
+param set-default CA_ROTOR4_AZ 0.0
+param set-default CA_ROTOR4_PX 0.2

 param set-default CA_SV_CS_COUNT 3
 param set-default CA_SV_CS0_TRQ_R -0.5
 param set-default CA_SV_CS0_TYPE 1
 param set-default CA_SV_CS1_TRQ_R 0.5
 param set-default CA_SV_CS1_TYPE 2
-param set-default CA_SV_CS2_TRQ_P 1
+param set-default CA_SV_CS2_TRQ_P 1.0
 param set-default CA_SV_CS2_TYPE 3

 param set-default HIL_ACT_FUNC1 101
@@ -100,3 +98,5 @@ param set-default CBRK_SUPPLY_CHK 894281
 param set-default CBRK_IO_SAFETY 22027

 param set-default MAV_TYPE 22
+
+
@@ -12,8 +12,26 @@

 . ${R}etc/init.d/rc.mc_defaults

+
 param set UAVCAN_ENABLE 0

+param set-default CA_ROTOR_COUNT 4
+param set-default CA_ROTOR0_PX 0.15
+param set-default CA_ROTOR0_PY 0.15
+param set-default CA_ROTOR1_PX -0.15
+param set-default CA_ROTOR1_PY -0.15
+param set-default CA_ROTOR2_PX 0.15
+param set-default CA_ROTOR2_PY -0.15
+param set-default CA_ROTOR2_KM -0.05
+param set-default CA_ROTOR3_PX -0.15
+param set-default CA_ROTOR3_PY 0.15
+param set-default CA_ROTOR3_KM -0.05
+
+param set-default HIL_ACT_FUNC1 101
+param set-default HIL_ACT_FUNC2 102
+param set-default HIL_ACT_FUNC3 103
+param set-default HIL_ACT_FUNC4 104
+
 # set SYS_HITL to 2 to start the SIH and avoid sensors startup
 param set SYS_HITL 2

@@ -24,21 +42,3 @@ param set-default CBRK_SUPPLY_CHK 894281
 param set-default CBRK_IO_SAFETY 22027

 param set SIH_VEHICLE_TYPE 0
-
-# Square quadrotor X PX4 numbering
-param set-default CA_ROTOR_COUNT 4
-param set-default CA_ROTOR0_PX 1
-param set-default CA_ROTOR0_PY 1
-param set-default CA_ROTOR1_PX -1
-param set-default CA_ROTOR1_PY -1
-param set-default CA_ROTOR2_PX 1
-param set-default CA_ROTOR2_PY -1
-param set-default CA_ROTOR2_KM -0.05
-param set-default CA_ROTOR3_PX -1
-param set-default CA_ROTOR3_PY 1
-param set-default CA_ROTOR3_KM -0.05
-
-param set-default HIL_ACT_FUNC1 101
-param set-default HIL_ACT_FUNC2 102
-param set-default HIL_ACT_FUNC3 103
-param set-default HIL_ACT_FUNC4 104
@@ -21,9 +21,9 @@ param set-default CA_ROTOR0_PX 0.3
 param set-default CA_SV_CS_COUNT 4
 param set-default CA_SV_CS0_TRQ_R 0.5
 param set-default CA_SV_CS0_TYPE 2
-param set-default CA_SV_CS1_TRQ_P 1
+param set-default CA_SV_CS1_TRQ_P 1.0
 param set-default CA_SV_CS1_TYPE 3
-param set-default CA_SV_CS2_TRQ_Y 1
+param set-default CA_SV_CS2_TRQ_Y 1.0
 param set-default CA_SV_CS2_TYPE 4
 param set-default CA_SV_CS3_TYPE 10

@@ -46,7 +46,7 @@ param set-default CBRK_IO_SAFETY 22027

 param set-default BAT_N_CELLS 3

-param set SIH_T_MAX 6
+param set SIH_T_MAX 6.0
 param set SIH_MASS 0.3
 param set SIH_IXX 0.00402
 param set SIH_IYY 0.0144
@@ -71,7 +71,7 @@ param set SIH_MASS 0.2
 param set SIH_IXX 0.00354
 param set SIH_IYY 0.000625
 param set SIH_IZZ 0.00300
-param set SIH_IXZ 0
+param set SIH_IXZ 0.0
 param set SIH_KDV 0.2
 param set SIH_L_ROLL 0.145

@@ -14,21 +14,6 @@

 param set-default CA_AIRFRAME 2
 param set-default CA_ROTOR_COUNT 5
-param set-default CA_ROTOR4_AX 1
-param set-default CA_ROTOR4_AZ 0
-param set-default CA_SV_CS_COUNT 4
-param set-default CA_SV_CS0_TYPE 1
-param set-default CA_SV_CS0_TRQ_R -0.5
-param set-default CA_SV_CS1_TYPE 2
-param set-default CA_SV_CS1_TRQ_R 0.5
-param set-default CA_SV_CS2_TYPE 3
-param set-default CA_SV_CS2_TRQ_P 1
-param set-default CA_SV_CS3_TRQ_Y 1
-param set-default CA_SV_CS3_TYPE 4
-param set-default VT_TYPE 2
-param set-default MAV_TYPE 22
-
-# Square quadrotor X PX4 numbering
 param set-default CA_ROTOR0_PX 1
 param set-default CA_ROTOR0_PY 1
 param set-default CA_ROTOR1_PX -1
@@ -39,3 +24,16 @@ param set-default CA_ROTOR2_KM -0.05
 param set-default CA_ROTOR3_PX -1
 param set-default CA_ROTOR3_PY 1
 param set-default CA_ROTOR3_KM -0.05
+param set-default CA_ROTOR4_AX 1.0
+param set-default CA_ROTOR4_AZ 0.0
+param set-default CA_SV_CS_COUNT 4
+param set-default CA_SV_CS0_TYPE 1
+param set-default CA_SV_CS0_TRQ_R -0.5
+param set-default CA_SV_CS1_TYPE 2
+param set-default CA_SV_CS1_TRQ_R 0.5
+param set-default CA_SV_CS2_TYPE 3
+param set-default CA_SV_CS2_TRQ_P 1.0
+param set-default CA_SV_CS3_TRQ_Y 1.0
+param set-default CA_SV_CS3_TYPE 4
+param set-default VT_TYPE 2
+param set-default MAV_TYPE 22
@@ -28,13 +28,13 @@ param set-default BAT1_CAPACITY 23000
 param set-default BAT1_N_CELLS 4
 param set-default BAT1_R_INTERNAL 0.0025

-param set-default SYS_HAS_NUM_ASPD 0
+param set-default CBRK_AIRSPD_CHK 162128
 param set-default CBRK_IO_SAFETY 22027

 param set-default EKF2_GPS_POS_X -0.12
 param set-default EKF2_IMU_POS_X -0.12

-param set-default FW_USE_AIRSPD 0
+param set-default FW_ARSP_MODE 1
 param set-default NPFG_PERIOD 25
 param set-default FW_PR_FF 0.7
 param set-default FW_PR_I 0.18
@@ -120,8 +120,8 @@ param set-default CA_ROTOR2_KM -0.05
 param set-default CA_ROTOR3_PX -0.1515
 param set-default CA_ROTOR3_PY 0.1875
 param set-default CA_ROTOR3_KM -0.05
-param set-default CA_ROTOR4_AX 1
-param set-default CA_ROTOR4_AZ 0
+param set-default CA_ROTOR4_AX 1.0
+param set-default CA_ROTOR4_AZ 0.0
 param set-default CA_ROTOR4_PX 0.2

 param set-default CA_SV_CS_COUNT 3
@@ -130,4 +130,4 @@ param set-default CA_SV_CS0_TRQ_R -0.5
 param set-default CA_SV_CS1_TYPE 2
 param set-default CA_SV_CS1_TRQ_R 0.5
 param set-default CA_SV_CS2_TYPE 3
-param set-default CA_SV_CS2_TRQ_P 1
+param set-default CA_SV_CS2_TRQ_P 1.0
@@ -80,10 +80,6 @@ param set-default VT_TYPE 2

 param set-default CA_AIRFRAME 2
 param set-default CA_ROTOR_COUNT 5
-param set-default CA_ROTOR4_AX 1
-param set-default CA_ROTOR4_AZ 0
-
-# Square quadrotor X PX4 numbering
 param set-default CA_ROTOR0_PX 1
 param set-default CA_ROTOR0_PY 1
 param set-default CA_ROTOR1_PX -1
@@ -94,16 +90,18 @@ param set-default CA_ROTOR2_KM -0.05
 param set-default CA_ROTOR3_PX -1
 param set-default CA_ROTOR3_PY 1
 param set-default CA_ROTOR3_KM -0.05
+param set-default CA_ROTOR4_AX 1.0
+param set-default CA_ROTOR4_AZ 0.0

 param set-default CA_SV_CS_COUNT 3
 param set-default CA_SV_CS0_TYPE 15
-param set-default CA_SV_CS0_TRQ_R 1
-param set-default CA_SV_CS1_TRQ_P 0.5
-param set-default CA_SV_CS1_TRQ_R 0
-param set-default CA_SV_CS1_TRQ_Y -0.5
+param set-default CA_SV_CS0_TRQ_R 1.0
+param set-default CA_SV_CS1_TRQ_P 0.5000
+param set-default CA_SV_CS1_TRQ_R 0.0000
+param set-default CA_SV_CS1_TRQ_Y -0.5000
 param set-default CA_SV_CS1_TYPE 13
-param set-default CA_SV_CS2_TRQ_P 0.5
-param set-default CA_SV_CS2_TRQ_Y 0.5
+param set-default CA_SV_CS2_TRQ_P 0.5000
+param set-default CA_SV_CS2_TRQ_Y 0.5000
 param set-default CA_SV_CS2_TYPE 14

 param set-default PWM_MAIN_FUNC1 201
@@ -19,30 +19,30 @@ param set-default MAV_TYPE 21
 param set-default VT_TYPE 1

 param set-default CA_AIRFRAME 3
+param set-default CA_ROTOR_COUNT 4
+param set-default CA_ROTOR0_PX 0.15
+param set-default CA_ROTOR0_PY 0.15
 param set-default CA_ROTOR0_TILT 1
+param set-default CA_ROTOR1_PX -0.15
+param set-default CA_ROTOR1_PY -0.15
 param set-default CA_ROTOR1_TILT 2
+param set-default CA_ROTOR2_PX 0.15
+param set-default CA_ROTOR2_PY -0.15
+param set-default CA_ROTOR2_KM -0.05
 param set-default CA_ROTOR2_TILT 3
+param set-default CA_ROTOR3_PX -0.15
+param set-default CA_ROTOR3_PY 0.15
+param set-default CA_ROTOR3_KM -0.05
 param set-default CA_ROTOR3_TILT 4
 param set-default CA_SV_CS_COUNT 4
 param set-default CA_SV_CS0_TYPE 1
 param set-default CA_SV_CS0_TRQ_R -0.5
 param set-default CA_SV_CS1_TRQ_R 0.5
 param set-default CA_SV_CS1_TYPE 2
-param set-default CA_SV_CS2_TRQ_P 1
+param set-default CA_SV_CS2_TRQ_P 1.0
 param set-default CA_SV_CS2_TYPE 3
-param set-default CA_SV_CS3_TRQ_Y 1
+param set-default CA_SV_CS3_TRQ_Y 1.0
 param set-default CA_SV_CS3_TYPE 4
 param set-default CA_SV_TL_COUNT 4

-# Square quadrotor X PX4 numbering
-param set-default CA_ROTOR_COUNT 4
-param set-default CA_ROTOR0_PX 1
-param set-default CA_ROTOR0_PY 1
-param set-default CA_ROTOR1_PX -1
-param set-default CA_ROTOR1_PY -1
-param set-default CA_ROTOR2_PX 1
-param set-default CA_ROTOR2_PY -1
-param set-default CA_ROTOR2_KM -0.05
-param set-default CA_ROTOR3_PX -1
-param set-default CA_ROTOR3_PY 1
-param set-default CA_ROTOR3_KM -0.05
+
@@ -12,22 +12,19 @@
 . ${R}etc/init.d/rc.vtol_defaults

 param set-default CA_AIRFRAME 3
-param set-default CA_ROTOR0_TILT 2
-param set-default CA_ROTOR2_TILT 1
-
-# Square quadrotor X PX4 numbering
 param set-default CA_ROTOR_COUNT 4
 param set-default CA_ROTOR0_PX 1
 param set-default CA_ROTOR0_PY 1
+param set-default CA_ROTOR0_TILT 2
 param set-default CA_ROTOR1_PX -1
 param set-default CA_ROTOR1_PY -1
 param set-default CA_ROTOR2_PX 1
 param set-default CA_ROTOR2_PY -1
+param set-default CA_ROTOR2_TILT 1
 param set-default CA_ROTOR2_KM -0.05
 param set-default CA_ROTOR3_PX -1
 param set-default CA_ROTOR3_PY 1
 param set-default CA_ROTOR3_KM -0.05
-
 param set-default CA_SV_CS_COUNT 4
 param set-default CA_SV_CS0_TYPE 1
 param set-default CA_SV_CS0_TRQ_R -0.5
@@ -20,16 +20,16 @@ param set-default MAV_TYPE 15

 param set-default CA_AIRFRAME 8
 # Tricopter
-param set-default CA_ROTOR0_PX 0.25
-param set-default CA_ROTOR0_PY 0.433
-param set-default CA_ROTOR1_PX 0.25
-param set-default CA_ROTOR1_PY -0.43
-param set-default CA_ROTOR2_PX -0.5
-param set-default CA_ROTOR2_PY 0
+param set-default CA_ROTOR0_PX 0.2500
+param set-default CA_ROTOR0_PY 0.4330
+param set-default CA_ROTOR1_PX 0.2500
+param set-default CA_ROTOR1_PY -0.4300
+param set-default CA_ROTOR2_PX -0.5000
+param set-default CA_ROTOR2_PY 0.0000
 param set-default CA_ROTOR2_TILT 1
 param set-default CA_ROTOR_COUNT 3
-param set-default CA_SV_TL0_MAXA 45
-param set-default CA_SV_TL0_MINA -45
+param set-default CA_SV_TL0_MAXA 45.0000
+param set-default CA_SV_TL0_MINA -45.0000
 param set-default CA_SV_TL0_TD 90
 param set-default CA_SV_TL_COUNT 1

@@ -18,7 +18,7 @@ param set-default CA_SV_CS0_TYPE 1
 param set-default CA_SV_CS0_TRQ_R -0.5
 param set-default CA_SV_CS1_TRQ_R 0.5
 param set-default CA_SV_CS1_TYPE 2
-param set-default CA_SV_CS2_TRQ_P 1
+param set-default CA_SV_CS2_TRQ_P 1.0
 param set-default CA_SV_CS2_TYPE 3
-param set-default CA_SV_CS3_TRQ_Y 1
+param set-default CA_SV_CS3_TRQ_Y 1.0
 param set-default CA_SV_CS3_TYPE 4
@@ -35,17 +35,17 @@ param set-default FW_W_RMAX 0
 param set-default CA_AIRFRAME 1
 param set-default CA_ROTOR_COUNT 1
 param set-default CA_SV_CS_COUNT 7
-param set-default CA_SV_CS0_TRQ_R -0.5
+param set-default CA_SV_CS0_TRQ_R -0.5000
 param set-default CA_SV_CS0_TYPE 1 #left aileron
-param set-default CA_SV_CS1_TRQ_R 0.5
+param set-default CA_SV_CS1_TRQ_R 0.5000
 param set-default CA_SV_CS1_TYPE 2 #right aileron
-param set-default CA_SV_CS2_TRQ_P 0.5
-param set-default CA_SV_CS2_TRQ_Y -0.5
+param set-default CA_SV_CS2_TRQ_P 0.5000
+param set-default CA_SV_CS2_TRQ_Y -0.5000
 param set-default CA_SV_CS2_TYPE 13 #left A-tail
-param set-default CA_SV_CS3_TRQ_P 0.5
-param set-default CA_SV_CS3_TRQ_Y 0.5
+param set-default CA_SV_CS3_TRQ_P 0.5000
+param set-default CA_SV_CS3_TRQ_Y 0.5000
 param set-default CA_SV_CS3_TYPE 14 #right A-tail
-param set-default CA_SV_CS4_TRQ_Y 1
+param set-default CA_SV_CS4_TRQ_Y 1.0000
 param set-default CA_SV_CS4_TYPE 12
 param set-default CA_SV_CS5_TYPE 9 #left flap
 param set-default CA_SV_CS6_TYPE 10 #right flap
@@ -21,21 +21,21 @@ param set-default CBRK_IO_SAFETY 22027
 param set-default CA_AIRFRAME 9

 param set-default CA_ROTOR_COUNT 3
-param set-default CA_ROTOR0_AX 1
-param set-default CA_ROTOR0_AZ 0
-param set-default CA_ROTOR0_KM 0
-param set-default CA_ROTOR0_PY 2
-param set-default CA_ROTOR1_AX 1
-param set-default CA_ROTOR1_AZ 0
-param set-default CA_ROTOR1_KM 0
-param set-default CA_ROTOR1_PY -2
-param set-default CA_ROTOR2_AY -1
-param set-default CA_ROTOR2_AZ 0
-param set-default CA_ROTOR2_KM 0
-param set-default CA_ROTOR2_PX -10
+param set-default CA_ROTOR0_AX 1.0000
+param set-default CA_ROTOR0_AZ 0.0000
+param set-default CA_ROTOR0_KM 0.0000
+param set-default CA_ROTOR0_PY 2.0000
+param set-default CA_ROTOR1_AX 1.0000
+param set-default CA_ROTOR1_AZ 0.0000
+param set-default CA_ROTOR1_KM 0.0000
+param set-default CA_ROTOR1_PY -2.0000
+param set-default CA_ROTOR2_AY -1.0000
+param set-default CA_ROTOR2_AZ 0.0000
+param set-default CA_ROTOR2_KM 0.0000
+param set-default CA_ROTOR2_PX -10.0000

 param set-default CA_SV_CS_COUNT 1
-param set-default CA_SV_CS0_TRQ_P 1
+param set-default CA_SV_CS0_TRQ_P 1.0000

 param set-default CA_R_REV 7

@@ -10,15 +10,15 @@

 . ${R}etc/init.d/rc.mc_defaults

-# Square quadrotor X PX4 numbering
 param set-default CA_ROTOR_COUNT 4
-param set-default CA_ROTOR0_PX 1
-param set-default CA_ROTOR0_PY 1
-param set-default CA_ROTOR1_PX -1
-param set-default CA_ROTOR1_PY -1
-param set-default CA_ROTOR2_PX 1
-param set-default CA_ROTOR2_PY -1
+param set-default CA_ROTOR0_PX 0.15
+param set-default CA_ROTOR0_PY 0.15
+param set-default CA_ROTOR1_PX -0.15
+param set-default CA_ROTOR1_PY -0.15
+param set-default CA_ROTOR2_PX 0.15
+param set-default CA_ROTOR2_PY -0.15
 param set-default CA_ROTOR2_KM -0.05
-param set-default CA_ROTOR3_PX -1
-param set-default CA_ROTOR3_PY 1
+param set-default CA_ROTOR3_PX -0.15
+param set-default CA_ROTOR3_PY 0.15
 param set-default CA_ROTOR3_KM -0.05
+
@@ -18,15 +18,14 @@ param set-default MC_PITCHRATE_P 0.18
 param set-default MC_ROLLRATE_I 0.15
 param set-default MC_PITCHRATE_I 0.15

-# Square quadrotor X PX4 numbering
 param set-default CA_ROTOR_COUNT 4
-param set-default CA_ROTOR0_PX 1
-param set-default CA_ROTOR0_PY 1
-param set-default CA_ROTOR1_PX -1
-param set-default CA_ROTOR1_PY -1
-param set-default CA_ROTOR2_PX 1
-param set-default CA_ROTOR2_PY -1
+param set-default CA_ROTOR0_PX 0.15
+param set-default CA_ROTOR0_PY 0.15
+param set-default CA_ROTOR1_PX -0.15
+param set-default CA_ROTOR1_PY -0.15
+param set-default CA_ROTOR2_PX 0.15
+param set-default CA_ROTOR2_PY -0.15
 param set-default CA_ROTOR2_KM -0.05
-param set-default CA_ROTOR3_PX -1
-param set-default CA_ROTOR3_PY 1
+param set-default CA_ROTOR3_PX -0.15
+param set-default CA_ROTOR3_PY 0.15
 param set-default CA_ROTOR3_KM -0.05
@@ -22,15 +22,14 @@ param set-default MC_PITCHRATE_I 0.3
 param set-default MC_ROLLRATE_D 0.004
 param set-default MC_PITCHRATE_D 0.004

-# Square quadrotor X PX4 numbering
 param set-default CA_ROTOR_COUNT 4
-param set-default CA_ROTOR0_PX 1
-param set-default CA_ROTOR0_PY 1
-param set-default CA_ROTOR1_PX -1
-param set-default CA_ROTOR1_PY -1
-param set-default CA_ROTOR2_PX 1
-param set-default CA_ROTOR2_PY -1
+param set-default CA_ROTOR0_PX 0.15
+param set-default CA_ROTOR0_PY 0.15
+param set-default CA_ROTOR1_PX -0.15
+param set-default CA_ROTOR1_PY -0.15
+param set-default CA_ROTOR2_PX 0.15
+param set-default CA_ROTOR2_PY -0.15
 param set-default CA_ROTOR2_KM -0.05
-param set-default CA_ROTOR3_PX -1
-param set-default CA_ROTOR3_PY 1
+param set-default CA_ROTOR3_PX -0.15
+param set-default CA_ROTOR3_PY 0.15
 param set-default CA_ROTOR3_KM -0.05
@@ -97,17 +97,18 @@ param set-default CBRK_IO_SAFETY 22027

 param set-default THR_MDL_FAC 0.3

-# Square quadrotor X PX4 numbering
 param set-default CA_ROTOR_COUNT 4
-param set-default CA_ROTOR0_PX 1
-param set-default CA_ROTOR0_PY 1
-param set-default CA_ROTOR1_PX -1
-param set-default CA_ROTOR1_PY -1
-param set-default CA_ROTOR2_PX 1
-param set-default CA_ROTOR2_PY -1
+param set-default CA_ROTOR0_PX 0.15
+param set-default CA_ROTOR0_PY 0.15
+param set-default CA_ROTOR0_KM 0.05
+param set-default CA_ROTOR1_PX -0.15
+param set-default CA_ROTOR1_PY -0.15
+param set-default CA_ROTOR1_KM 0.05
+param set-default CA_ROTOR2_PX 0.15
+param set-default CA_ROTOR2_PY -0.15
 param set-default CA_ROTOR2_KM -0.05
-param set-default CA_ROTOR3_PX -1
-param set-default CA_ROTOR3_PY 1
+param set-default CA_ROTOR3_PX -0.15
+param set-default CA_ROTOR3_PY 0.15
 param set-default CA_ROTOR3_KM -0.05

 # Outputs
@@ -115,3 +116,4 @@ param set-default PWM_AUX_FUNC1 101
 param set-default PWM_AUX_FUNC2 102
 param set-default PWM_AUX_FUNC3 103
 param set-default PWM_AUX_FUNC4 104
+
@@ -21,15 +21,14 @@ param set-default MC_ROLLRATE_I 0.15
 param set-default MC_PITCHRATE_P 0.18
 param set-default MC_PITCHRATE_I 0.15

-# Square quadrotor X PX4 numbering
 param set-default CA_ROTOR_COUNT 4
-param set-default CA_ROTOR0_PX 1
-param set-default CA_ROTOR0_PY 1
-param set-default CA_ROTOR1_PX -1
-param set-default CA_ROTOR1_PY -1
-param set-default CA_ROTOR2_PX 1
-param set-default CA_ROTOR2_PY -1
+param set-default CA_ROTOR0_PX 0.15
+param set-default CA_ROTOR0_PY 0.15
+param set-default CA_ROTOR1_PX -0.15
+param set-default CA_ROTOR1_PY -0.15
+param set-default CA_ROTOR2_PX 0.15
+param set-default CA_ROTOR2_PY -0.15
 param set-default CA_ROTOR2_KM -0.05
-param set-default CA_ROTOR3_PX -1
-param set-default CA_ROTOR3_PY 1
+param set-default CA_ROTOR3_PX -0.15
+param set-default CA_ROTOR3_PY 0.15
 param set-default CA_ROTOR3_KM -0.05
@@ -22,20 +22,19 @@ param set-default MC_PITCHRATE_I 0.3
 param set-default MC_ROLLRATE_D 0.004
 param set-default MC_PITCHRATE_D 0.004

+param set-default CA_ROTOR_COUNT 4
+param set-default CA_ROTOR0_PX 0.25
+param set-default CA_ROTOR0_PY 0.25
+param set-default CA_ROTOR1_PX -0.25
+param set-default CA_ROTOR1_PY -0.25
+param set-default CA_ROTOR2_PX 0.25
+param set-default CA_ROTOR2_PY -0.25
+param set-default CA_ROTOR2_KM -0.05
+param set-default CA_ROTOR3_PX -0.25
+param set-default CA_ROTOR3_PY 0.25
+param set-default CA_ROTOR3_KM -0.05
+
 param set-default PWM_MAIN_FUNC1 101
 param set-default PWM_MAIN_FUNC2 102
 param set-default PWM_MAIN_FUNC3 103
 param set-default PWM_MAIN_FUNC4 104
-
-# Square quadrotor X PX4 numbering
-param set-default CA_ROTOR_COUNT 4
-param set-default CA_ROTOR0_PX 1
-param set-default CA_ROTOR0_PY 1
-param set-default CA_ROTOR1_PX -1
-param set-default CA_ROTOR1_PY -1
-param set-default CA_ROTOR2_PX 1
-param set-default CA_ROTOR2_PY -1
-param set-default CA_ROTOR2_KM -0.05
-param set-default CA_ROTOR3_PX -1
-param set-default CA_ROTOR3_PY 1
-param set-default CA_ROTOR3_KM -0.05
@@ -98,17 +98,18 @@ param set-default CBRK_IO_SAFETY 22027

 param set-default THR_MDL_FAC 0.3

-# Square quadrotor X PX4 numbering
 param set-default CA_ROTOR_COUNT 4
-param set-default CA_ROTOR0_PX 1
-param set-default CA_ROTOR0_PY 1
-param set-default CA_ROTOR1_PX -1
-param set-default CA_ROTOR1_PY -1
-param set-default CA_ROTOR2_PX 1
-param set-default CA_ROTOR2_PY -1
+param set-default CA_ROTOR0_PX 0.15
+param set-default CA_ROTOR0_PY 0.15
+param set-default CA_ROTOR0_KM 0.05
+param set-default CA_ROTOR1_PX -0.15
+param set-default CA_ROTOR1_PY -0.15
+param set-default CA_ROTOR1_KM 0.05
+param set-default CA_ROTOR2_PX 0.15
+param set-default CA_ROTOR2_PY -0.15
 param set-default CA_ROTOR2_KM -0.05
-param set-default CA_ROTOR3_PX -1
-param set-default CA_ROTOR3_PY 1
+param set-default CA_ROTOR3_PX -0.15
+param set-default CA_ROTOR3_PY 0.15
 param set-default CA_ROTOR3_KM -0.05

 # Outputs
@@ -116,3 +117,4 @@ param set-default PWM_AUX_FUNC1 101
 param set-default PWM_AUX_FUNC2 102
 param set-default PWM_AUX_FUNC3 103
 param set-default PWM_AUX_FUNC4 104
+
@@ -46,20 +46,22 @@ param set-default SYS_HAS_MAG 0

 param set-default BAT1_N_CELLS 2

-# Square quadrotor X with reverse turn direction
 param set-default CA_ROTOR_COUNT 4
-param set-default CA_ROTOR0_PX 1
-param set-default CA_ROTOR0_PY 1
+param set-default CA_ROTOR0_PX 0.03
+param set-default CA_ROTOR0_PY 0.03
 param set-default CA_ROTOR0_KM -0.05
-param set-default CA_ROTOR1_PX -1
-param set-default CA_ROTOR1_PY -1
+param set-default CA_ROTOR1_PX -0.03
+param set-default CA_ROTOR1_PY -0.03
 param set-default CA_ROTOR1_KM -0.05
-param set-default CA_ROTOR2_PX 1
-param set-default CA_ROTOR2_PY -1
-param set-default CA_ROTOR3_PX -1
-param set-default CA_ROTOR3_PY 1
+param set-default CA_ROTOR2_PX 0.03
+param set-default CA_ROTOR2_PY -0.03
+param set-default CA_ROTOR2_KM 0.05
+param set-default CA_ROTOR3_PX -0.03
+param set-default CA_ROTOR3_PY 0.03
+param set-default CA_ROTOR3_KM 0.05

 param set-default PWM_MAIN_FUNC1 104
 param set-default PWM_MAIN_FUNC2 101
 param set-default PWM_MAIN_FUNC3 102
 param set-default PWM_MAIN_FUNC4 103
+
@@ -36,15 +36,16 @@ param set-default SDLOG_PROFILE 19
 param set-default IMU_DGYRO_CUTOFF 50
 param set-default IMU_GYRO_CUTOFF 90

-# Square quadrotor X PX4 numbering
 param set-default CA_ROTOR_COUNT 4
-param set-default CA_ROTOR0_PX 1
-param set-default CA_ROTOR0_PY 1
-param set-default CA_ROTOR1_PX -1
-param set-default CA_ROTOR1_PY -1
-param set-default CA_ROTOR2_PX 1
-param set-default CA_ROTOR2_PY -1
+param set-default CA_ROTOR0_PX 0.15
+param set-default CA_ROTOR0_PY 0.15
+param set-default CA_ROTOR1_PX -0.15
+param set-default CA_ROTOR1_PY -0.15
+param set-default CA_ROTOR2_PX 0.15
+param set-default CA_ROTOR2_PY -0.15
 param set-default CA_ROTOR2_KM -0.05
-param set-default CA_ROTOR3_PX -1
-param set-default CA_ROTOR3_PY 1
+param set-default CA_ROTOR3_PX -0.15
+param set-default CA_ROTOR3_PY 0.15
 param set-default CA_ROTOR3_KM -0.05
+
+
@@ -46,20 +46,20 @@ param set-default MPC_Z_VEL_I_ACC 1.7

 param set-default THR_MDL_FAC 0.3

-# Square quadrotor X PX4 numbering
 param set-default CA_ROTOR_COUNT 4
-param set-default CA_ROTOR0_PX 1
-param set-default CA_ROTOR0_PY 1
-param set-default CA_ROTOR1_PX -1
-param set-default CA_ROTOR1_PY -1
-param set-default CA_ROTOR2_PX 1
-param set-default CA_ROTOR2_PY -1
+param set-default CA_ROTOR0_PX 0.15
+param set-default CA_ROTOR0_PY 0.15
+param set-default CA_ROTOR1_PX -0.15
+param set-default CA_ROTOR1_PY -0.15
+param set-default CA_ROTOR2_PX 0.15
+param set-default CA_ROTOR2_PY -0.15
 param set-default CA_ROTOR2_KM -0.05
-param set-default CA_ROTOR3_PX -1
-param set-default CA_ROTOR3_PY 1
+param set-default CA_ROTOR3_PX -0.15
+param set-default CA_ROTOR3_PY 0.15
 param set-default CA_ROTOR3_KM -0.05

 param set-default PWM_MAIN_FUNC1 101
 param set-default PWM_MAIN_FUNC2 102
 param set-default PWM_MAIN_FUNC3 103
 param set-default PWM_MAIN_FUNC4 104
+
@@ -53,17 +53,16 @@ param set-default MC_AIRMODE 1

 param set-default EV_TSK_RC_LOSS 1

-# Square quadrotor X PX4 numbering
 param set-default CA_ROTOR_COUNT 4
-param set-default CA_ROTOR0_PX 1
-param set-default CA_ROTOR0_PY 1
-param set-default CA_ROTOR1_PX -1
-param set-default CA_ROTOR1_PY -1
-param set-default CA_ROTOR2_PX 1
-param set-default CA_ROTOR2_PY -1
+param set-default CA_ROTOR0_PX 0.15
+param set-default CA_ROTOR0_PY 0.15
+param set-default CA_ROTOR1_PX -0.15
+param set-default CA_ROTOR1_PY -0.15
+param set-default CA_ROTOR2_PX 0.15
+param set-default CA_ROTOR2_PY -0.15
 param set-default CA_ROTOR2_KM -0.05
-param set-default CA_ROTOR3_PX -1
-param set-default CA_ROTOR3_PY 1
+param set-default CA_ROTOR3_PX -0.15
+param set-default CA_ROTOR3_PY 0.15
 param set-default CA_ROTOR3_KM -0.05

 param set-default PWM_MAIN_FUNC1 104
@@ -73,3 +72,5 @@ param set-default PWM_MAIN_FUNC4 103

 param set-default PWM_MAIN_TIM0 -2
 param set-default PWM_MAIN_TIM1 -2
+
+
@@ -11,11 +11,12 @@

 . ${R}etc/init.d/rc.mc_defaults

+
 # Battery settings
 param set-default BAT_CRIT_THR 0.20
 param set-default BAT_LOW_THR 0.25

-param set-default BAT1_CAPACITY 2800
+param set-default BAT1_CAPACITY 2800.0
 param set-default BAT1_N_CELLS 3
 param set-default BAT1_R_INTERNAL 0.02
 param set-default BAT1_V_CHARGED 4.26
@@ -37,7 +38,7 @@ param set-default COM_RC_LOSS_T 3

 # ekf2
 param set-default EKF2_TERR_MASK 1
-param set-default EKF2_BARO_NOISE 2
+param set-default EKF2_BARO_NOISE 2.0

 param set-default EKF2_BCOEF_X 31.5
 param set-default EKF2_BCOEF_Y 25.5
@@ -55,11 +56,11 @@ param set-default EKF2_MAG_NOISE 0.1
 param set-default EKF2_MIN_RNG 0.15

 param set-default EKF2_OF_DELAY 38
-param set-default EKF2_OF_GATE 2
+param set-default EKF2_OF_GATE 2.0
 param set-default EKF2_OF_POS_X -0.035
 param set-default EKF2_OF_POS_Z 0.033
 param set-default EKF2_OF_MIN_RNG 0.01
-param set-default EKF2_OF_A_HMAX 7
+param set-default EKF2_OF_A_HMAX 7.0
 param set-default EKF2_OF_QMIN 30

 param set-default EKF2_PCOEF_XN -0.3
@@ -67,18 +68,18 @@ param set-default EKF2_PCOEF_XP -0.4
 param set-default EKF2_PCOEF_YN -0.4
 param set-default EKF2_PCOEF_YP -0.4

-param set-default EKF2_RNG_A_VMAX 1
+param set-default EKF2_RNG_A_VMAX 1.0
 param set-default EKF2_RNG_CTRL 0
 param set-default EKF2_RNG_DELAY 55
 param set-default EKF2_RNG_POS_X -0.035
-param set-default EKF2_RNG_POS_Y 0
+param set-default EKF2_RNG_POS_Y 0.0
 param set-default EKF2_RNG_POS_Z 0.033

-param set-default EKF2_TERR_NOISE 1
+param set-default EKF2_TERR_NOISE 1.0


 # Maximum allowed angle velocity in the landed state
-param set-default LNDMC_ROT_MAX 40
+param set-default LNDMC_ROT_MAX 40.0

 # Maximum vertical velocity allowed in the landed state
 param set-default LNDMC_Z_VEL_MAX 0.7
@@ -93,36 +94,36 @@ param set-default IMU_GYRO_CUTOFF 65
 param set-default MC_PITCHRATE_P 0.075
 param set-default MC_PITCHRATE_I 0.1
 param set-default MC_PITCHRATE_D 0.0005
-param set-default MC_PITCHRATE_MAX 360
-param set-default MC_PITCH_P 8
+param set-default MC_PITCHRATE_MAX 360.0
+param set-default MC_PITCH_P 8.0

 # Roll angle & rate setting
 param set-default MC_ROLLRATE_P 0.055
 param set-default MC_ROLLRATE_I 0.1
 param set-default MC_ROLLRATE_D 0.0005
-param set-default MC_ROLLRATE_MAX 360
-param set-default MC_ROLL_P 8
+param set-default MC_ROLLRATE_MAX 360.0
+param set-default MC_ROLL_P 8.0

 # Yaw angle & rate setting
 param set-default MC_YAWRATE_P 0.1
-param set-default MC_YAWRATE_MAX 120
+param set-default MC_YAWRATE_MAX 120.0
 param set-default MC_YAW_P 2.5

-param set-default MPC_ACC_DOWN_MAX 2
-param set-default MPC_ACC_HOR 3
-param set-default MPC_ACC_HOR_MAX 10
-param set-default MPC_ACC_UP_MAX 3
+param set-default MPC_ACC_DOWN_MAX 2.0
+param set-default MPC_ACC_HOR 3.0
+param set-default MPC_ACC_HOR_MAX 10.0
+param set-default MPC_ACC_UP_MAX 3.0
 param set-default MPC_ALT_MODE 0
 param set-default MPC_LAND_SPEED 0.5
 param set-default MPC_MAN_TILT_MAX 20
-param set-default MPC_YAWRAUTO_MAX 80
+param set-default MPC_YAWRAUTO_MAX 80.0
 param set-default MPC_THR_HOVER 0.54
 param set-default MPC_THR_MAX 0.9
 param set-default MPC_THR_MIN 0.06
 param set-default MPC_TILTMAX_AIR 30
-param set-default MPC_XY_P 1
-param set-default MPC_Z_P 2
-param set-default MPC_Z_VEL_MAX_DN 2
+param set-default MPC_XY_P 1.0
+param set-default MPC_Z_P 2.0
+param set-default MPC_Z_VEL_MAX_DN 2.0

 # gimbal configuration
 param set-default MNT_MODE_IN 0
@@ -149,22 +150,21 @@ param set-default RC1_TRIM          1000
 # optical flow
 param set-default SENS_FLOW_MAXR   7.4
 param set-default SENS_FLOW_MINHGT 0.15
-param set-default SENS_FLOW_MAXHGT 5
+param set-default SENS_FLOW_MAXHGT 5.0

 # ignore the SD card errors and use normal startup sound
 set STARTUP_TUNE "1"

-# Square quadrotor X PX4 numbering
 param set-default CA_ROTOR_COUNT 4
-param set-default CA_ROTOR0_PX 1
-param set-default CA_ROTOR0_PY 1
-param set-default CA_ROTOR1_PX -1
-param set-default CA_ROTOR1_PY -1
-param set-default CA_ROTOR2_PX 1
-param set-default CA_ROTOR2_PY -1
+param set-default CA_ROTOR0_PX 0.15
+param set-default CA_ROTOR0_PY 0.15
+param set-default CA_ROTOR1_PX -0.15
+param set-default CA_ROTOR1_PY -0.15
+param set-default CA_ROTOR2_PX 0.15
+param set-default CA_ROTOR2_PY -0.15
 param set-default CA_ROTOR2_KM -0.05
-param set-default CA_ROTOR3_PX -1
-param set-default CA_ROTOR3_PY 1
+param set-default CA_ROTOR3_PX -0.15
+param set-default CA_ROTOR3_PY 0.15
 param set-default CA_ROTOR3_KM -0.05

 param set-default TAP_ESC_FUNC1 101
@@ -73,22 +73,23 @@ param set-default MAV_1_CONFIG 102
 param set-default MAV_1_MODE 0
 param set-default SER_TEL2_BAUD 57600

-param set-default PWM_MAIN_TIM0 0

-# Square quadrotor X PX4 numbering
 param set-default CA_ROTOR_COUNT 4
-param set-default CA_ROTOR0_PX 1
-param set-default CA_ROTOR0_PY 1
-param set-default CA_ROTOR1_PX -1
-param set-default CA_ROTOR1_PY -1
-param set-default CA_ROTOR2_PX 1
-param set-default CA_ROTOR2_PY -1
+param set-default CA_ROTOR0_PX 0.15
+param set-default CA_ROTOR0_PY 0.15
+param set-default CA_ROTOR1_PX -0.15
+param set-default CA_ROTOR1_PY -0.15
+param set-default CA_ROTOR2_PX 0.15
+param set-default CA_ROTOR2_PY -0.15
 param set-default CA_ROTOR2_KM -0.05
-param set-default CA_ROTOR3_PX -1
-param set-default CA_ROTOR3_PY 1
+param set-default CA_ROTOR3_PX -0.15
+param set-default CA_ROTOR3_PY 0.15
 param set-default CA_ROTOR3_KM -0.05

+param set-default PWM_MAIN_TIM0 0
+
 param set-default PWM_MAIN_FUNC1 101
 param set-default PWM_MAIN_FUNC2 102
 param set-default PWM_MAIN_FUNC3 103
 param set-default PWM_MAIN_FUNC4 104
+
@@ -91,22 +91,22 @@ param set-default EKF2_OF_POS_Z -0.07
 # Failsafe
 param set-default COM_LOW_BAT_ACT 3

-param set-default PWM_MAIN_TIM0 -3
-
-# Square quadrotor X PX4 numbering
 param set-default CA_ROTOR_COUNT 4
-param set-default CA_ROTOR0_PX 1
-param set-default CA_ROTOR0_PY 1
-param set-default CA_ROTOR1_PX -1
-param set-default CA_ROTOR1_PY -1
-param set-default CA_ROTOR2_PX 1
-param set-default CA_ROTOR2_PY -1
+param set-default CA_ROTOR0_PX 0.15
+param set-default CA_ROTOR0_PY 0.15
+param set-default CA_ROTOR1_PX -0.15
+param set-default CA_ROTOR1_PY -0.15
+param set-default CA_ROTOR2_PX 0.15
+param set-default CA_ROTOR2_PY -0.15
 param set-default CA_ROTOR2_KM -0.05
-param set-default CA_ROTOR3_PX -1
-param set-default CA_ROTOR3_PY 1
+param set-default CA_ROTOR3_PX -0.15
+param set-default CA_ROTOR3_PY 0.15
 param set-default CA_ROTOR3_KM -0.05

+param set-default PWM_MAIN_TIM0 -3
+
 param set-default PWM_MAIN_FUNC1 101
 param set-default PWM_MAIN_FUNC2 102
 param set-default PWM_MAIN_FUNC3 103
 param set-default PWM_MAIN_FUNC4 104
+
@@ -27,17 +27,16 @@ param set-default MPC_XY_P 1.1
 param set-default MPC_Z_VEL_P_ACC 4.8
 param set-default MPC_Z_P 1.2

-# Square quadrotor X PX4 numbering
 param set-default CA_ROTOR_COUNT 4
-param set-default CA_ROTOR0_PX 1
-param set-default CA_ROTOR0_PY 1
-param set-default CA_ROTOR1_PX -1
-param set-default CA_ROTOR1_PY -1
-param set-default CA_ROTOR2_PX 1
-param set-default CA_ROTOR2_PY -1
+param set-default CA_ROTOR0_PX 0.15
+param set-default CA_ROTOR0_PY 0.15
+param set-default CA_ROTOR1_PX -0.15
+param set-default CA_ROTOR1_PY -0.15
+param set-default CA_ROTOR2_PX 0.15
+param set-default CA_ROTOR2_PY -0.15
 param set-default CA_ROTOR2_KM -0.05
-param set-default CA_ROTOR3_PX -1
-param set-default CA_ROTOR3_PY 1
+param set-default CA_ROTOR3_PX -0.15
+param set-default CA_ROTOR3_PY 0.15
 param set-default CA_ROTOR3_KM -0.05

 param set-default PWM_MAIN_FUNC1 101
@@ -17,6 +17,7 @@
 #
 . ${R}etc/init.d/rc.mc_defaults

+
 param set-default SYS_MC_EST_GROUP 2
 param set-default SYS_HAS_MAG 0
 param set-default EKF2_OF_CTRL 1
@@ -49,22 +50,22 @@ param set-default MPC_MAX_FLOW_HGT 3

 param set-default NAV_RCL_ACT 3

+param set-default CA_ROTOR_COUNT 4
+param set-default CA_ROTOR0_PX 0.03
+param set-default CA_ROTOR0_PY 0.03
+param set-default CA_ROTOR1_PX -0.03
+param set-default CA_ROTOR1_PY 0.03
+param set-default CA_ROTOR1_KM -0.05
+param set-default CA_ROTOR2_PX -0.03
+param set-default CA_ROTOR2_PY -0.03
+param set-default CA_ROTOR3_PX 0.03
+param set-default CA_ROTOR3_PY -0.03
+param set-default CA_ROTOR3_KM -0.05
+
 # Run the motors at 328.125 kHz (recommended)
 param set-default PWM_MAIN_TIM0 3921
 param set-default PWM_MAIN_TIM1 3921

-# Square quadrotor X clockwise numbering
-param set-default CA_ROTOR0_PX 1
-param set-default CA_ROTOR0_PY 1
-param set-default CA_ROTOR1_PX -1
-param set-default CA_ROTOR1_PY 1
-param set-default CA_ROTOR1_KM -0.05
-param set-default CA_ROTOR2_PX -1
-param set-default CA_ROTOR2_PY -1
-param set-default CA_ROTOR3_PX 1
-param set-default CA_ROTOR3_PY -1
-param set-default CA_ROTOR3_KM -0.05
-
 param set-default PWM_MAIN_FUNC1 101
 param set-default PWM_MAIN_FUNC2 102
 param set-default PWM_MAIN_FUNC3 103
@@ -36,9 +36,9 @@ param set-default GND_THR_MAX 0.5
 param set-default GND_MAX_ANG 1.042
 param set-default GND_WHEEL_BASE 0.17

-# TODO: Set to -1, to allow reversing. This will require many changes in the codebase
+# TODO: Set to -1.0, to allow reversing. This will require many changes in the codebase
 # to support negative throttle.
-param set-default GND_THR_MIN 0
+param set-default GND_THR_MIN 0.0
 param set-default GND_SPEED_P 0.25
 param set-default GND_SPEED_I 3
 param set-default GND_SPEED_D 0.001
@@ -1,10 +1,12 @@
 #!/bin/sh
 #
-# @name Generic Quad + geometry
+# @name Generic 10" Quad + geometry
 #
 # @type Quadrotor +
 # @class Copter
 #
+# @maintainer Lorenz Meier <lorenz@px4.io>
+#
 # @board bitcraze_crazyflie exclude
 # @board px4_fmu-v2 exclude
 #
@@ -12,17 +14,13 @@
 . ${R}etc/init.d/rc.mc_defaults

 param set-default CA_ROTOR_COUNT 4
-
-param set-default CA_ROTOR0_PX 0
-param set-default CA_ROTOR0_PY 1
-
-param set-default CA_ROTOR1_PX 0
-param set-default CA_ROTOR1_PY -1
-
-param set-default CA_ROTOR2_PX 1
-param set-default CA_ROTOR2_PY 0
-param set-default CA_ROTOR2_KM -0.05
-
-param set-default CA_ROTOR3_PX -1
-param set-default CA_ROTOR3_PY 0
-param set-default CA_ROTOR3_KM -0.05
+param set-default CA_ROTOR0_PX 0.15
+param set-default CA_ROTOR0_PY 0.15
+param set-default CA_ROTOR0_KM -0.05
+param set-default CA_ROTOR1_PX -0.15
+param set-default CA_ROTOR1_PY -0.15
+param set-default CA_ROTOR1_KM -0.05
+param set-default CA_ROTOR2_PX 0.15
+param set-default CA_ROTOR2_PY -0.15
+param set-default CA_ROTOR3_PX -0.15
+param set-default CA_ROTOR3_PY 0.15
@@ -5,6 +5,8 @@
 # @type Underwater Robot
 # @class Underwater Robot
 #
+# @maintainer
+#
 # @board px4_fmu-v2 exclude
 # @board bitcraze_crazyflie exclude
 #
@@ -12,7 +12,38 @@
 #

 . ${R}etc/init.d/rc.uuv_defaults
-. ${R}etc/init.d/airframes/60000_uuv_generic
+
+param set-default CA_AIRFRAME 7
+param set-default CA_ROTOR_COUNT 4
+param set-default CA_R_REV 255
+param set-default CA_ROTOR0_AX 1
+param set-default CA_ROTOR0_AY 0
+param set-default CA_ROTOR0_AZ 0
+param set-default CA_ROTOR0_KM 0
+param set-default CA_ROTOR0_PX 0
+param set-default CA_ROTOR0_PY -0.3
+param set-default CA_ROTOR0_PZ -0.3
+param set-default CA_ROTOR1_AX 1
+param set-default CA_ROTOR1_AY 0
+param set-default CA_ROTOR1_AZ 0
+param set-default CA_ROTOR1_KM 0
+param set-default CA_ROTOR1_PX 0
+param set-default CA_ROTOR1_PY 0.3
+param set-default CA_ROTOR1_PZ -0.3
+param set-default CA_ROTOR2_AX 1
+param set-default CA_ROTOR2_AY 0
+param set-default CA_ROTOR2_AZ 0
+param set-default CA_ROTOR2_KM 0
+param set-default CA_ROTOR2_PX 0
+param set-default CA_ROTOR2_PY 0.3
+param set-default CA_ROTOR2_PZ 0.3
+param set-default CA_ROTOR3_AX 1
+param set-default CA_ROTOR3_AY 0
+param set-default CA_ROTOR3_AZ 0
+param set-default CA_ROTOR3_KM 0
+param set-default CA_ROTOR3_PX 0
+param set-default CA_ROTOR3_PY -0.3
+param set-default CA_ROTOR3_PZ 0.3

 param set-default PWM_MAIN_FUNC1 101
 param set-default PWM_MAIN_FUNC2 102
@@ -30,7 +30,7 @@ param set-default MAV_1_CONFIG 102

 param set-default BAT1_A_PER_V 37.8798
 param set-default BAT1_CAPACITY 18000
-param set-default BAT1_V_DIV 11
+param set-default BAT1_V_DIV 11.0
 param set-default BAT1_N_CELLS 4
 param set-default BAT_V_OFFS_CURR 0.33

@@ -38,49 +38,49 @@ param set-default CA_AIRFRAME 7

 param set-default CA_ROTOR_COUNT 8
 param set-default CA_R_REV 255
-param set-default CA_ROTOR0_AX 1
-param set-default CA_ROTOR0_AY -1
-param set-default CA_ROTOR0_AZ 0
-param set-default CA_ROTOR0_KM 0
-param set-default CA_ROTOR0_PX 0.5
-param set-default CA_ROTOR0_PY 0.3
-param set-default CA_ROTOR0_PZ 0.2
-param set-default CA_ROTOR1_AX 1
-param set-default CA_ROTOR1_AY 1
-param set-default CA_ROTOR1_AZ 0
-param set-default CA_ROTOR1_KM 0
-param set-default CA_ROTOR1_PX 0.5
-param set-default CA_ROTOR1_PY -0.3
-param set-default CA_ROTOR1_PZ 0.2
-param set-default CA_ROTOR2_AX 1
-param set-default CA_ROTOR2_AY 1
-param set-default CA_ROTOR2_AZ 0
-param set-default CA_ROTOR2_KM 0
-param set-default CA_ROTOR2_PX -0.5
-param set-default CA_ROTOR2_PY 0.3
-param set-default CA_ROTOR2_PZ 0.2
-param set-default CA_ROTOR3_AX 1
-param set-default CA_ROTOR3_AY -1
-param set-default CA_ROTOR3_AZ 0
-param set-default CA_ROTOR3_KM 0
-param set-default CA_ROTOR3_PX -0.5
-param set-default CA_ROTOR3_PY -0.3
-param set-default CA_ROTOR3_PZ 0.2
-param set-default CA_ROTOR4_AZ -1
-param set-default CA_ROTOR4_KM 0
-param set-default CA_ROTOR4_PX 0.5
-param set-default CA_ROTOR4_PY 0.5
-param set-default CA_ROTOR5_AZ 1
-param set-default CA_ROTOR5_KM 0
-param set-default CA_ROTOR5_PX 0.5
-param set-default CA_ROTOR5_PY -0.5
-param set-default CA_ROTOR6_AZ 1
-param set-default CA_ROTOR6_KM 0
-param set-default CA_ROTOR6_PX -0.5
-param set-default CA_ROTOR6_PY 0.5
-param set-default CA_ROTOR7_KM 0
-param set-default CA_ROTOR7_PX -0.5
-param set-default CA_ROTOR7_PY -0.5
+param set-default CA_ROTOR0_AX 1.0000
+param set-default CA_ROTOR0_AY -1.0000
+param set-default CA_ROTOR0_AZ 0.0000
+param set-default CA_ROTOR0_KM 0.0000
+param set-default CA_ROTOR0_PX 0.5000
+param set-default CA_ROTOR0_PY 0.3000
+param set-default CA_ROTOR0_PZ 0.2000
+param set-default CA_ROTOR1_AX 1.0000
+param set-default CA_ROTOR1_AY 1.0000
+param set-default CA_ROTOR1_AZ 0.0000
+param set-default CA_ROTOR1_KM 0.0000
+param set-default CA_ROTOR1_PX 0.5000
+param set-default CA_ROTOR1_PY -0.3000
+param set-default CA_ROTOR1_PZ 0.2000
+param set-default CA_ROTOR2_AX 1.0000
+param set-default CA_ROTOR2_AY 1.0000
+param set-default CA_ROTOR2_AZ 0.0000
+param set-default CA_ROTOR2_KM 0.0000
+param set-default CA_ROTOR2_PX -0.5000
+param set-default CA_ROTOR2_PY 0.3000
+param set-default CA_ROTOR2_PZ 0.2000
+param set-default CA_ROTOR3_AX 1.0000
+param set-default CA_ROTOR3_AY -1.0000
+param set-default CA_ROTOR3_AZ 0.0000
+param set-default CA_ROTOR3_KM 0.0000
+param set-default CA_ROTOR3_PX -0.5000
+param set-default CA_ROTOR3_PY -0.3000
+param set-default CA_ROTOR3_PZ 0.2000
+param set-default CA_ROTOR4_AZ -1.0000
+param set-default CA_ROTOR4_KM 0.0000
+param set-default CA_ROTOR4_PX 0.5000
+param set-default CA_ROTOR4_PY 0.5000
+param set-default CA_ROTOR5_AZ 1.0000
+param set-default CA_ROTOR5_KM 0.0000
+param set-default CA_ROTOR5_PX 0.5000
+param set-default CA_ROTOR5_PY -0.5000
+param set-default CA_ROTOR6_AZ 1.0000
+param set-default CA_ROTOR6_KM 0.0000
+param set-default CA_ROTOR6_PX -0.5000
+param set-default CA_ROTOR6_PY 0.5000
+param set-default CA_ROTOR7_KM 0.0000
+param set-default CA_ROTOR7_PX -0.5000
+param set-default CA_ROTOR7_PY -0.5000

 param set-default PWM_MAIN_FUNC1 101
 param set-default PWM_MAIN_FUNC2 102
@@ -16,10 +16,10 @@
 param set-default MAV_TYPE 13

 param set-default CA_ROTOR_COUNT 6
-param set-default CA_ROTOR0_PX 0
+param set-default CA_ROTOR0_PX 0.0
 param set-default CA_ROTOR0_PY 0.5
 param set-default CA_ROTOR0_KM -0.05
-param set-default CA_ROTOR1_PX 0
+param set-default CA_ROTOR1_PX 0.0
 param set-default CA_ROTOR1_PY -0.5
 param set-default CA_ROTOR2_PX 0.43
 param set-default CA_ROTOR2_PY -0.25
@@ -97,10 +97,10 @@ param set-default SER_TEL2_BAUD 921600


 param set-default CA_ROTOR_COUNT 6
-param set-default CA_ROTOR0_PX 0
+param set-default CA_ROTOR0_PX 0.0
 param set-default CA_ROTOR0_PY 0.5
 param set-default CA_ROTOR0_KM -0.05
-param set-default CA_ROTOR1_PX 0
+param set-default CA_ROTOR1_PX 0.0
 param set-default CA_ROTOR1_PY -0.5
 param set-default CA_ROTOR2_PX 0.43
 param set-default CA_ROTOR2_PY -0.25
@@ -17,10 +17,10 @@ param set-default MAV_TYPE 13

 param set-default CA_ROTOR_COUNT 6
 param set-default CA_ROTOR0_PX 0.5
-param set-default CA_ROTOR0_PY 0
+param set-default CA_ROTOR0_PY 0.0
 param set-default CA_ROTOR0_KM -0.05
 param set-default CA_ROTOR1_PX -0.5
-param set-default CA_ROTOR1_PY 0
+param set-default CA_ROTOR1_PY 0.0
 param set-default CA_ROTOR2_PX -0.25
 param set-default CA_ROTOR2_PY -0.43
 param set-default CA_ROTOR2_KM -0.05
@@ -33,8 +33,8 @@ param set-default EKF2_REQ_EPH 10
 param set-default EKF2_REQ_EPV 10
 param set-default EKF2_REQ_HDRIFT 0.5
 param set-default EKF2_REQ_SACC 1
-param set-default EKF2_REQ_VDRIFT 1
-param set-default EKF2_RNG_QLTY_T 3
+param set-default EKF2_REQ_VDRIFT 1.0
+param set-default EKF2_RNG_QLTY_T 3.0

 param set-default RTL_TYPE 1
 param set-default RTL_RETURN_ALT 100
@@ -54,5 +54,3 @@ param set-default MIS_TKO_LAND_REQ 2
 # FW takeoff acceleration can easily exceed ublox GPS 2G default.
 #
 param set-default GPS_UBX_DYNMODEL 8
-
-param set-default SYS_HAS_NUM_ASPD 1 # by default require an airspeed sensor
@@ -10,6 +10,9 @@ set VEHICLE_TYPE rover
 # MAV_TYPE_GROUND_ROVER 10
 param set-default MAV_TYPE 10

+# Enable Airspeed check circuit breaker because Rovers will have no airspeed sensor
+param set-default CBRK_AIRSPD_CHK 162128
+
 param set-default MIS_TAKEOFF_ALT 0.01

 param set-default NAV_ACC_RAD 2
@@ -5,7 +5,7 @@
 ekf2 start &

 # Start rover differential drive controller.
-differential_drive start
+rover_control start

 # Start Land Detector.
 land_detector start rover
@@ -22,11 +22,6 @@ then
 	set TEMP_COMP_START "true"
 fi

-if param compare -s TC_M_ENABLE 1
-then
-	set TEMP_COMP_START "true"
-fi
-
 if [ "x$TEMP_COMP_START" != "x" ]
 then
 	temperature_compensation start
@@ -9,3 +9,6 @@ set VEHICLE_TYPE uuv

 # MAV_TYPE_SUBMARINE 12
 param set-default MAV_TYPE 12
+
+# UUV don't have an airspeed sensor, so disable checks around it
+param set-default CBRK_AIRSPD_CHK 162128
@@ -21,7 +21,7 @@ param set-default MIS_YAW_TMT 10
 param set-default EKF2_ARSP_THR 10
 param set-default EKF2_FUSE_BETA 1

-param set-default HTE_VXY_THR 2
+param set-default HTE_VXY_THR 2.0

 param set-default MIS_TKO_LAND_REQ 2

@@ -42,6 +42,4 @@ param set-default MPC_MAN_Y_MAX 90

 param set-default RTL_TYPE 1

-param set-default SYS_HAS_NUM_ASPD 1 # by default require an airspeed sensor
-
 param set-default WV_EN 1
@@ -170,7 +170,7 @@ else
 		param select-backup $PARAM_BACKUP_FILE
 	fi

-	if mft query -q -k MFT -s MFT_ETHERNET -v 1
+	if ver hwcmp PX4_FMU_V5X PX4_FMU_V6X ARK_FMU_V6X PX4_FMU_V6XRT
 	then
 		netman update -i eth0
 	fi
@@ -0,0 +1,20 @@
+{
+  "configurations": [
+    {
+      "browse": {
+        "databaseFilename": "${default}",
+        "limitSymbolsToIncludedHeaders": false
+      },
+      "includePath": [
+        "/opt/ros/humble/include/**",
+        "/usr/include/**"
+      ],
+      "name": "ROS",
+      "intelliSenseMode": "gcc-x64",
+      "compilerPath": "/usr/bin/gcc",
+      "cStandard": "gnu11",
+      "cppStandard": "c++14"
+    }
+  ],
+  "version": 4
+}
@@ -0,0 +1,10 @@
+{
+    "python.autoComplete.extraPaths": [
+        "/opt/ros/humble/lib/python3.10/site-packages",
+        "/opt/ros/humble/local/lib/python3.10/dist-packages"
+    ],
+    "python.analysis.extraPaths": [
+        "/opt/ros/humble/lib/python3.10/site-packages",
+        "/opt/ros/humble/local/lib/python3.10/dist-packages"
+    ]
+}
@@ -0,0 +1,47 @@
+# Build version
+version: "{build}"
+# do not shallow clone because we want to infer the version from the last tag
+
+branches:
+  only:
+  - master
+  - beta
+  - stable
+
+# Build worker image (build VM template)
+image: Visual Studio 2017
+
+environment:
+  matrix:
+    - PX4_CONFIG: tests # this builds posix in px4_sitl_test folder and runs tests
+    - PX4_CONFIG: px4_fmu-v5_default
+
+install:
+# if the toolchain wasn't restored from build cache download and install it
+- ps: >-
+    if (-not (Test-Path C:\PX4)) {
+        Invoke-WebRequest https://s3-us-west-2.amazonaws.com/px4-tools/PX4+Windows+Cygwin+Toolchain/PX4+Windows+Cygwin+Toolchain+0.9.msi -OutFile C:\Toolchain.msi
+        Start-Process -Wait msiexec -ArgumentList '/I C:\Toolchain.msi /quiet /qn /norestart /log C:\install.log'
+    }
+
+# Note: using Start-Process -Wait is important
+# because otherwise the install begins but non-blocking and the result cannot be used just after
+
+build_script:
+# FIXME Temporary we need to create the home folder because it's not contained in installer 0.5 and CI fails if it doesn't exist
+- if not exist "C:\PX4\home" mkdir C:\PX4\home
+# setup the environmental variables to work within the installed cygwin toolchain
+- call C:\PX4\toolchain\scripts\setup-environment.bat x
+# safe the repopath for switching to it in cygwin bash
+- for /f %%i in ('cygpath -u %%CD%%') do set repopath=%%i
+# build the make target
+- call bash --login -c "cd $repopath && make $PX4_CONFIG"
+
+# Note: using bash --login is important
+# because otherwise certain things (like python; import numpy) do not work
+
+cache:
+# cache the entire toolchain installation folder to avoid
+# downloading it from AWS S3 and installing the MSI each time
+# it's ~1.8GB > 1GB free limit for build caches
+- C:\PX4 -> appveyor.yml
@@ -39,6 +39,7 @@ CONFIG_MODULES_CAMERA_FEEDBACK=y
 CONFIG_MODULES_COMMANDER=y
 CONFIG_MODULES_CONTROL_ALLOCATOR=y
 CONFIG_MODULES_DATAMAN=y
+CONFIG_MODULES_ROVER_CONTROL=y
 CONFIG_MODULES_EKF2=y
 CONFIG_MODULES_ESC_BATTERY=y
 CONFIG_MODULES_EVENTS=y
@@ -39,6 +39,7 @@ CONFIG_MODULES_CAMERA_FEEDBACK=y
 CONFIG_MODULES_COMMANDER=y
 CONFIG_MODULES_CONTROL_ALLOCATOR=y
 CONFIG_MODULES_DATAMAN=y
+CONFIG_MODULES_ROVER_CONTROL=y
 CONFIG_MODULES_EKF2=y
 CONFIG_MODULES_ESC_BATTERY=y
 CONFIG_MODULES_EVENTS=y
@@ -22,12 +22,12 @@ param set-default SENS_IMU_TEMP 10.0
 #param set-default SENS_IMU_TEMP_I 0.025
 #param set-default SENS_IMU_TEMP_P 1.0

-if ver hwtypecmp ARKV6X000
+if ver hwtypecmp ARKV6X000000 ARKV6X001000 ARKV6X002000 ARKV6X003000 ARKV6X004000 ARKV6X005000 ARKV6X006000 ARKV6X007000
 then
 	param set-default SENS_TEMP_ID 2818058
 fi

-if ver hwtypecmp ARKV6X001
+if ver hwtypecmp ARKV6X000001 ARKV6X001001 ARKV6X002001 ARKV6X003001 ARKV6X004001 ARKV6X005001 ARKV6X006001 ARKV6X007001
 then
 	param set-default SENS_TEMP_ID 3014666
 fi
@@ -5,7 +5,7 @@
 set HAVE_PM2 yes
 set HAVE_PM3 yes

-if mft query -q -k MFT -s MFT_PM2 -v 0
+if ver hwtypecmp ARKV6X005000 ARKV6X005001 ARKV6X005002 ARKV6X005003 ARKV6X005004
 then
 	set HAVE_PM2 no
 	set HAVE_PM3 no
@@ -66,7 +66,7 @@ then
 	fi
 fi

-if ver hwtypecmp ARKV6X000
+if ver hwtypecmp ARKV6X000000 ARKV6X001000 ARKV6X002000 ARKV6X003000 ARKV6X004000 ARKV6X005000 ARKV6X006000 ARKV6X007000
 then
 	# Internal SPI bus IIM42652 with SPIX measured frequency of 32.051kHz
 	iim42652 -R 3 -s -b 1 -C 32051 start
@@ -78,7 +78,7 @@ then
 	icm42688p -R 6 -s -b 3 -C 32051 start
 fi

-if ver hwtypecmp ARKV6X001
+if ver hwtypecmp ARKV6X000001 ARKV6X001001 ARKV6X002001 ARKV6X003001 ARKV6X004001 ARKV6X005001 ARKV6X006001 ARKV6X007001
 then
 	# Internal SPI bus IIM42653 with SPIX measured frequency of 32.051kHz
 	#iim42653 -R 3 -s -b 1 -C 32051 start
@@ -248,7 +248,7 @@

 /* ADC 1 2 3 clock source */

-#define STM32_RCC_D3CCIPR_ADCSRC     RCC_D3CCIPR_ADCSEL_PLL2
+#define STM32_RCC_D3CCIPR_ADCSEL     RCC_D3CCIPR_ADCSEL_PLL2

 /* FDCAN 1 2 clock source */

@@ -380,7 +380,7 @@
 #define GPIO_UART5_RX    GPIO_UART5_RX_3    /* PD2  */
 #define GPIO_UART5_TX    GPIO_UART5_TX_3    /* PC12 */
 // GPIO_UART5_RTS  No remap                 /* PC8  */
-#define GPIO_UART5_CTS   (GPIO_ALT|GPIO_AF8|GPIO_PORTC|GPIO_PIN9|GPIO_PULLDOWN)    /* PC9  */
+// GPIO_UART5_CTS  No remap                 /* PC9  */

 #define GPIO_USART6_RX   GPIO_USART6_RX_1   /* PC7 */
 #define GPIO_USART6_TX   GPIO_USART6_TX_1   /* PC6  */
--- a/Show More
+++ b/Show More
Author	SHA1	Message	Date
PerFrivik	a471755dac	Rover module: Temp	2023-12-19 15:04:34 +01:00
Matthias Grob	7cbc6241d7	Add differential drive control module to all targets that have rover support	2023-12-19 11:55:52 +01:00
Matthias Grob	257a66d99d	Differential Rover: PR fixes	2023-12-19 11:54:41 +01:00
Matthias Grob	a26be63f54	differential_drive_control: don't build by default also add dependency on control allocation parameter CA_R_REV	2023-12-19 11:39:36 +01:00
PerFrivik	679a4e2d98	Differential Rover: Differential drive module & library	2023-12-19 11:37:08 +01:00
PerFrivik	ddd201118d	Differential Drive: Added mixing interface for motors	2023-12-19 11:29:27 +01:00
PerFrivik	6e7ed49ad3	Differential Rover: Added logging and dds topics	2023-12-19 11:22:14 +01:00
PerFrivik	a33dccfcc2	Differential Rover: Update airframe architecture	2023-12-19 11:22:05 +01:00