TEMP

- matrix in PX4/Firmware (d9ebf2a842f611976d7ba5078d3f31ad8cde55a7): https://github.com/PX4/PX4-Matrix/commit/3679f7fd5160c7d2a8271b1134ca1e601f1a4254
    - matrix current upstream: https://github.com/PX4/PX4-Matrix/commit/1d0e7f1ca1187c90c70a9dac92ca6294a320b1d3
    - Changes: https://github.com/PX4/PX4-Matrix/compare/3679f7fd5160c7d2a8271b1134ca1e601f1a4254...1d0e7f1ca1187c90c70a9dac92ca6294a320b1d3

    1d0e7f1 2021-04-14 Daniel Agar - Matrix: use naive per element copy instead of memcpy call
1344ce0 2021-04-14 Daniel Agar - Euler: simplify DCM constructor

.ci/Jenkinsfile-compile

@@ -45,23 +45,16 @@ pipeline {
                      "cuav_can-gps-v1_canbootloader",
                      "cuav_can-gps-v1_default",
                      "cuav_nora_default",
-                     "cuav_nora_test",
                      "cuav_x7pro_default",
-                     "cuav_x7pro_test",
-                     "cubepilot_cubeorange_console",
                      "cubepilot_cubeorange_default",
-                     "cubepilot_cubeyellow_console",
                      "cubepilot_cubeyellow_default",
                      "holybro_can-gps-v1_canbootloader",
                      "holybro_can-gps-v1_default",
                      "holybro_durandal-v1_default",
-                     "holybro_durandal-v1_test",
                      "holybro_kakutef7_default",
                      "holybro_pix32v5_default",
                      "modalai_fc-v1_default",
                      "modalai_fc-v1_rtps",
-                     "mro_cannode_canbootloader",
-                     "mro_cannode_default",
                      "mro_ctrl-zero-f7_default",
                      "mro_ctrl-zero-f7-oem_default",
                      "mro_ctrl-zero-h7_default",
@@ -83,7 +76,6 @@ pipeline {
                      "px4_fmu-v2_fixedwing",
                      "px4_fmu-v2_multicopter",
                      "px4_fmu-v2_rover",
-                     "px4_fmu-v2_test",
                      "px4_fmu-v3_default",
                      "px4_fmu-v4_cannode",
                      "px4_fmu-v4_default",
@@ -102,7 +94,6 @@ pipeline {
                      "px4_fmu-v5x_base_phy_DP83848C",
                      "px4_fmu-v5x_default",
                      "px4_fmu-v6u_default",
-                     "px4_fmu-v6u_test",
                      "px4_fmu-v6x_default",
                      "px4_io-v2_default",
                      "spracing_h7extreme_default",

.ci/Jenkinsfile-hardware

@@ -7,9 +7,9 @@ pipeline {
 
       parallel {
 
-        stage("cubepilot_cubeorange_console") {
+        stage("cubepilot_cubeorange_test") {
           stages {
-            stage("build cubepilot_cubeorange_console") {
+            stage("build cubepilot_cubeorange_test") {
               agent {
                 docker {
                   image 'px4io/px4-dev-nuttx-focal:2020-09-14'
@@ -22,10 +22,10 @@ pipeline {
                 sh 'make distclean'
                 sh 'ccache -s'
                 sh 'git fetch --tags'
-                sh 'make cubepilot_cubeorange_console'
+                sh 'make cubepilot_cubeorange_test'
                 sh 'make sizes'
                 sh 'ccache -s'
-                stash includes: 'build/*/*.elf, platforms/nuttx/Debug/upload_jlink_gdb.sh, Tools/HIL/*.py', name: 'cubepilot_cubeorange_console'
+                stash includes: 'build/*/*.elf, platforms/nuttx/Debug/upload_jlink_gdb.sh, Tools/HIL/*.py', name: 'cubepilot_cubeorange_test'
               }
               post {
                 always {
@@ -42,9 +42,9 @@ pipeline {
                   steps {
                     sh 'export'
                     sh 'find /dev/serial'
-                    unstash 'cubepilot_cubeorange_console'
+                    unstash 'cubepilot_cubeorange_test'
                     // flash board and watch bootup
-                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/cubepilot_cubeorange_console/cubepilot_cubeorange_console.elf && ./Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-*` --baudrate 57600'
+                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/cubepilot_cubeorange_test/cubepilot_cubeorange_test.elf && ./Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-*` --baudrate 57600'
                   }
                 }
                 stage("configure") {
@@ -160,61 +160,9 @@ pipeline {
           }
         }
 
-        // stage("px4_fmu-v2_test") {
-        //   stages {
-        //     stage("build px4_fmu-v2_test") {
-        //       agent {
-        //         docker {
-        //           image 'px4io/px4-dev-nuttx-focal:2020-09-14'
-        //           args '-e CCACHE_BASEDIR=$WORKSPACE -v ${CCACHE_DIR}:${CCACHE_DIR}:rw'
-        //         }
-        //       }
-        //       steps {
-        //         sh 'export'
-        //         sh 'make distclean'
-        //         sh 'ccache -s'
-        //         sh 'git fetch --tags'
-        //         sh 'make px4_fmu-v2_test'
-        //         sh 'make sizes'
-        //         sh 'ccache -s'
-        //         stash includes: 'build/px4_fmu-v2_test/px4_fmu-v2_test.elf', name: 'px4_fmu-v2_test'
-        //       }
-        //       post {
-        //         always {
-        //             sh 'make distclean'
-        //         }
-        //       }
-        //     } // stage build
-        //     stage("test") {
-        //       agent {
-        //         label 'px4_fmu-v2'
-        //       }
-        //       stages {
-        //         stage("flash") {
-        //           steps {
-        //             sh 'export'
-        //             sh 'find /dev/serial'
-        //             unstash 'px4_fmu-v2_test'
-        //             // flash board and watch bootup
-        //             sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/px4_fmu-v2_test/px4_fmu-v2_test.elf && ./Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-*` --baudrate 57600'
-        //           }
-        //         }
-        //         stage("reset") {
-        //           steps {
-        //             cleanupFTDI();
-        //           }
-        //         }
-        //       }
-        //       options {
-        //         timeout(time: 90, unit: 'MINUTES')
-        //       }
-        //     }
-        //   }
-        // }
-
-        stage("px4_fmu-v3_default") {
+        stage("px4_fmu-v3_test") {
           stages {
-            stage("build px4_fmu-v3_default") {
+            stage("build px4_fmu-v3_test") {
               agent {
                 docker {
                   image 'px4io/px4-dev-nuttx-focal:2020-09-14'
@@ -227,10 +175,10 @@ pipeline {
                 sh 'make distclean'
                 sh 'ccache -s'
                 sh 'git fetch --tags'
-                sh 'make px4_fmu-v3_default'
+                sh 'make px4_fmu-v3_test'
                 sh 'make sizes'
                 sh 'ccache -s'
-                stash includes: 'build/*/*.elf, platforms/nuttx/Debug/upload_jlink_gdb.sh, Tools/HIL/*.py', name: 'px4_fmu-v3_default'
+                stash includes: 'build/*/*.elf, platforms/nuttx/Debug/upload_jlink_gdb.sh, Tools/HIL/*.py', name: 'px4_fmu-v3_test'
               }
               post {
                 always {
@@ -247,9 +195,9 @@ pipeline {
                   steps {
                     sh 'export'
                     sh 'find /dev/serial'
-                    unstash 'px4_fmu-v3_default'
+                    unstash 'px4_fmu-v3_test'
                     // flash board and watch bootup
-                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/px4_fmu-v3_default/px4_fmu-v3_default.elf && ./Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-*` --baudrate 57600'
+                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/px4_fmu-v3_test/px4_fmu-v3_test.elf && ./Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-*` --baudrate 57600'
                   }
                 }
                 stage("configure") {
@@ -288,9 +236,9 @@ pipeline {
           }
         }
 
-        stage("px4_fmu-v4_default") {
+        stage("px4_fmu-v4_test") {
           stages {
-            stage("build px4_fmu-v4_default") {
+            stage("build px4_fmu-v4_test") {
               agent {
                 docker {
                   image 'px4io/px4-dev-nuttx-focal:2020-09-14'
@@ -303,10 +251,10 @@ pipeline {
                 sh 'make distclean'
                 sh 'ccache -s'
                 sh 'git fetch --tags'
-                sh 'make px4_fmu-v4_default'
+                sh 'make px4_fmu-v4_test'
                 sh 'make sizes'
                 sh 'ccache -s'
-                stash includes: 'build/*/*.elf, platforms/nuttx/Debug/upload_jlink_gdb.sh, Tools/HIL/*.py', name: 'px4_fmu-v4_default'
+                stash includes: 'build/*/*.elf, platforms/nuttx/Debug/upload_jlink_gdb.sh, Tools/HIL/*.py', name: 'px4_fmu-v4_test'
               }
               post {
                 always {
@@ -323,9 +271,9 @@ pipeline {
                   steps {
                     sh 'export'
                     sh 'find /dev/serial'
-                    unstash 'px4_fmu-v4_default'
+                    unstash 'px4_fmu-v4_test'
                     // flash board and watch bootup
-                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/px4_fmu-v4_default/px4_fmu-v4_default.elf && ./Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-*` --baudrate 57600'
+                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/px4_fmu-v4_test/px4_fmu-v4_test.elf && ./Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-*` --baudrate 57600'
                   }
                 }
                 stage("configure") {
@@ -364,9 +312,9 @@ pipeline {
           }
         }
 
-        stage("px4_fmu-v4pro_default") {
+        stage("px4_fmu-v4pro_test") {
           stages {
-            stage("build px4_fmu-v4pro_default") {
+            stage("build px4_fmu-v4pro_test") {
               agent {
                 docker {
                   image 'px4io/px4-dev-nuttx-focal:2020-09-14'
@@ -379,10 +327,10 @@ pipeline {
                 sh 'make distclean'
                 sh 'ccache -s'
                 sh 'git fetch --tags'
-                sh 'make px4_fmu-v4pro_default'
+                sh 'make px4_fmu-v4pro_test'
                 sh 'make sizes'
                 sh 'ccache -s'
-                stash includes: 'build/*/*.elf, platforms/nuttx/Debug/upload_jlink_gdb.sh, Tools/HIL/*.py', name: 'px4_fmu-v4pro_default'
+                stash includes: 'build/*/*.elf, platforms/nuttx/Debug/upload_jlink_gdb.sh, Tools/HIL/*.py', name: 'px4_fmu-v4pro_test'
               }
               post {
                 always {
@@ -399,9 +347,9 @@ pipeline {
                   steps {
                     sh 'export'
                     sh 'find /dev/serial'
-                    unstash 'px4_fmu-v4pro_default'
+                    unstash 'px4_fmu-v4pro_test'
                     // flash board and watch bootup
-                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/px4_fmu-v4pro_default/px4_fmu-v4pro_default.elf && ./Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-*` --baudrate 57600'
+                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/px4_fmu-v4pro_test/px4_fmu-v4pro_test.elf && ./Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-*` --baudrate 57600'
                   }
                 }
                 stage("configure") {
@@ -440,9 +388,9 @@ pipeline {
           }
         }
 
-        stage("px4_fmu-v5_default") {
+        stage("px4_fmu-v5_test") {
           stages {
-            stage("build px4_fmu-v5_default") {
+            stage("build px4_fmu-v5_test") {
               agent {
                 docker {
                   image 'px4io/px4-dev-nuttx-focal:2020-09-14'
@@ -455,10 +403,10 @@ pipeline {
                 sh 'make distclean'
                 sh 'ccache -s'
                 sh 'git fetch --tags'
-                sh 'make px4_fmu-v5_default'
+                sh 'make px4_fmu-v5_test'
                 sh 'make sizes'
                 sh 'ccache -s'
-                stash includes: 'build/*/*.elf, platforms/nuttx/Debug/upload_jlink_gdb.sh, Tools/HIL/*.py', name: 'px4_fmu-v5_default'
+                stash includes: 'build/*/*.elf, platforms/nuttx/Debug/upload_jlink_gdb.sh, Tools/HIL/*.py', name: 'px4_fmu-v5_test'
               }
               post {
                 always {
@@ -475,9 +423,9 @@ pipeline {
                   steps {
                     sh 'export'
                     sh 'find /dev/serial'
-                    unstash 'px4_fmu-v5_default'
+                    unstash 'px4_fmu-v5_test'
                     // flash board and watch bootup
-                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/px4_fmu-v5_default/px4_fmu-v5_default.elf && ./Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-*` --baudrate 57600'
+                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/px4_fmu-v5_test/px4_fmu-v5_test.elf && ./Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-*` --baudrate 57600'
                   }
                 }
                 stage("configure") {
@@ -752,9 +700,9 @@ pipeline {
           }
         }
 
-        stage("modalai_fc-v1_default") {
+        stage("modalai_fc-v1_test") {
           stages {
-            stage("build modalai_fc-v1_default") {
+            stage("build modalai_fc-v1_test") {
               agent {
                 docker {
                   image 'px4io/px4-dev-nuttx-focal:2020-09-14'
@@ -767,10 +715,10 @@ pipeline {
                 sh 'make distclean'
                 sh 'ccache -s'
                 sh 'git fetch --tags'
-                sh 'make modalai_fc-v1_default'
+                sh 'make modalai_fc-v1_test'
                 sh 'make sizes'
                 sh 'ccache -s'
-                stash includes: 'build/*/*.elf, platforms/nuttx/Debug/upload_jlink_gdb.sh, Tools/HIL/*.py', name: 'modalai_fc-v1_default'
+                stash includes: 'build/*/*.elf, platforms/nuttx/Debug/upload_jlink_gdb.sh, Tools/HIL/*.py', name: 'modalai_fc-v1_test'
               }
               post {
                 always {
@@ -787,9 +735,9 @@ pipeline {
                   steps {
                     sh 'export'
                     sh 'find /dev/serial'
-                    unstash 'modalai_fc-v1_default'
+                    unstash 'modalai_fc-v1_test'
                     // flash board and watch bootup
-                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/modalai_fc-v1_default/modalai_fc-v1_default.elf && ./Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-*` --baudrate 57600'
+                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/modalai_fc-v1_test/modalai_fc-v1_test.elf && ./Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-*` --baudrate 57600'
                   }
                 }
                 stage("configure") {
@@ -905,9 +853,9 @@ pipeline {
           }
         }
 
-        stage("nxp_fmuk66-v3_default") {
+        stage("nxp_fmuk66-v3_test") {
           stages {
-            stage("build nxp_fmuk66-v3_default") {
+            stage("build nxp_fmuk66-v3_test") {
               agent {
                 docker {
                   image 'px4io/px4-dev-nuttx-focal:2020-09-14'
@@ -920,10 +868,10 @@ pipeline {
                 sh 'make distclean'
                 sh 'ccache -s'
                 sh 'git fetch --tags'
-                sh 'make nxp_fmuk66-v3_default'
+                sh 'make nxp_fmuk66-v3_test'
                 sh 'make sizes'
                 sh 'ccache -s'
-                stash includes: 'build/*/*.elf, platforms/nuttx/Debug/upload_jlink_gdb.sh, Tools/HIL/*.py', name: 'nxp_fmuk66-v3_default'
+                stash includes: 'build/*/*.elf, platforms/nuttx/Debug/upload_jlink_gdb.sh, Tools/HIL/*.py', name: 'nxp_fmuk66-v3_test'
               }
               post {
                 always {
@@ -940,9 +888,9 @@ pipeline {
                   steps {
                     sh 'export'
                     sh 'find /dev/serial'
-                    unstash 'nxp_fmuk66-v3_default'
+                    unstash 'nxp_fmuk66-v3_test'
                     // flash board and watch bootup
-                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/nxp_fmuk66-v3_default/nxp_fmuk66-v3_default.elf && ./Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-*` --baudrate 57600'
+                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/nxp_fmuk66-v3_test/nxp_fmuk66-v3_test.elf && ./Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-*` --baudrate 57600'
                   }
                 }
                 stage("configure") {

.github/workflows/compile_nuttx.yml

@@ -26,25 +26,20 @@ jobs:
           cuav_can-gps-v1_debug,
           cuav_can-gps-v1_default,
           cuav_nora_default,
-          cuav_nora_test,
           cuav_x7pro_default,
-          cuav_x7pro_test,
-          cubepilot_cubeorange_console,
           cubepilot_cubeorange_default,
-          cubepilot_cubeyellow_console,
+          cubepilot_cubeorange_test,
           cubepilot_cubeyellow_default,
+          cubepilot_cubeyellow_test,
           cubepilot_io-v2_default,
           holybro_can-gps-v1_canbootloader,
           holybro_can-gps-v1_debug,
           holybro_can-gps-v1_default,
           holybro_durandal-v1_default,
-          holybro_durandal-v1_test,
           holybro_kakutef7_default,
           holybro_pix32v5_default,
           modalai_fc-v1_default,
           modalai_fc-v1_rtps,
-          mro_cannode_canbootloader,
-          mro_cannode_default,
           mro_ctrl-zero-f7-oem_default,
           mro_ctrl-zero-f7_default,
           mro_ctrl-zero-h7-oem_default,
@@ -66,7 +61,6 @@ jobs:
           px4_fmu-v2_fixedwing,
           px4_fmu-v2_multicopter,
           px4_fmu-v2_rover,
-          px4_fmu-v2_test,
           px4_fmu-v3_default,
           px4_fmu-v4_cannode,
           px4_fmu-v4_default,
@@ -85,7 +79,6 @@ jobs:
           px4_fmu-v5x_base_phy_DP83848C,
           px4_fmu-v5x_default,
           px4_fmu-v6u_default,
-          px4_fmu-v6u_test,
           px4_fmu-v6x_default,
           px4_io-v2_default,
           spracing_h7extreme_default,

.gitmodules

@@ -59,7 +59,7 @@
 	url = https://github.com/UAVCAN/public_regulated_data_types.git
 [submodule "src/drivers/uavcannode_gps_demo/public_regulated_data_types"]
 	path = src/drivers/uavcannode_gps_demo/public_regulated_data_types
-	url = https://github.com/UAVCAN/public_regulated_data_types
+	url = https://github.com/UAVCAN/public_regulated_data_types.git
 [submodule "src/drivers/uavcannode_gps_demo/libcanard"]
 	path = src/drivers/uavcannode_gps_demo/libcanard
-	url = https://github.com/UAVCAN/libcanard
+	url = https://github.com/UAVCAN/libcanard.git

.vscode/cmake-variants.yaml

@@ -96,11 +96,11 @@ CONFIG:
       buildType: MinSizeRel
       settings:
         CONFIG: cuav_x7pro_default
-    cubepilot_cubeorange_console:
+    cubepilot_cubeorange_test:
       short: cubepilot_cubeorange
       buildType: MinSizeRel
       settings:
-        CONFIG: cubepilot_orange_console
+        CONFIG: cubepilot_orange_test
     emlid_navio2_default:
       short: emlid_navio2
       buildType: MinSizeRel
@@ -126,11 +126,6 @@ CONFIG:
       buildType: MinSizeRel
       settings:
         CONFIG: modalai_fc-v1_default
-    mro_cannode_default:
-      short: mro_cannode_default
-      buildType: MinSizeRel
-      settings:
-        CONFIG: mro_cannode_default
     mro_ctrl-zero-f7_default:
       short: mro_ctrl-zero-f7
       buildType: MinSizeRel

ROMFS/px4fmu_common/init.d/airframes/13014_vtol_babyshark

@@ -111,5 +111,6 @@ set MAV_TYPE 22
 set MIXER babyshark
 set MIXER_AUX pass
 
+# Mark outputs for the alternate rate
+# or D-Shot
 set PWM_OUT 5678
-set PWM_AUX_OUT 1234

ROMFS/px4fmu_common/init.d/rc.interface

@@ -144,6 +144,11 @@ then
 		set OUTPUT_DEV /dev/uavcan/esc
 	fi
 
+	if [ $OUTPUT_MODE = vesc ]
+	then
+		set OUTPUT_DEV /dev/vesc
+	fi
+
 	if mixer load ${OUTPUT_DEV} ${MIXER_FILE}
 	then
 		echo "INFO  [init] Mixer: ${MIXER_FILE} on ${OUTPUT_DEV}"

ROMFS/px4fmu_common/init.d/rcS

@@ -282,6 +282,11 @@ else
 		fi
 	fi
 
+	if param greater -s VESC_PORT 0
+	then
+		set OUTPUT_MODE vesc
+	fi
+
 	#
 	# Check if PX4IO present and update firmware if needed.
 	# Assumption IOFW set to firmware file and IO_PRESENT = no

boards/airmind/mindpx-v2/default.cmake

@@ -8,7 +8,6 @@ px4_add_board(
 	ARCHITECTURE cortex-m4
 	CONSTRAINED_MEMORY
 	ROMFSROOT px4fmu_common
-	TESTING
 	UAVCAN_INTERFACES 1
 	SERIAL_PORTS
 		GPS1:/dev/ttyS3
@@ -48,7 +47,6 @@ px4_add_board(
 		roboclaw
 		rpm
 		telemetry # all available telemetry drivers
-		test_ppm
 		tone_alarm
 		uavcan
 	MODULES
@@ -110,7 +108,6 @@ px4_add_board(
 		sd_bench
 		serial_test
 		system_time
-		tests # tests and test runner
 		top
 		topic_listener
 		tune_control
@@ -120,15 +117,15 @@ px4_add_board(
 		work_queue
 	EXAMPLES
 		fake_gps
-		fake_gyro
-		fake_magnetometer
-		fixedwing_control # Tutorial code from https://px4.io/dev/example_fixedwing_control
-		hello
-		hwtest # Hardware test
+		#fake_gyro
+		#fake_magnetometer
+		#fixedwing_control # Tutorial code from https://px4.io/dev/example_fixedwing_control
+		#hello
+		#hwtest # Hardware test
 		#matlab_csv_serial
-		px4_mavlink_debug # Tutorial code from http://dev.px4.io/en/debug/debug_values.html
-		px4_simple_app # Tutorial code from http://dev.px4.io/en/apps/hello_sky.html
-		rover_steering_control # Rover example app
-		uuv_example_app
-		work_item
+		#px4_mavlink_debug # Tutorial code from http://dev.px4.io/en/debug/debug_values.html
+		#px4_simple_app # Tutorial code from http://dev.px4.io/en/apps/hello_sky.html
+		#rover_steering_control # Rover example app
+		#uuv_example_app
+		#work_item
 	)

boards/atlflight/eagle/default.cmake

@@ -39,7 +39,6 @@ px4_add_board(
 	VENDOR atlflight
 	MODEL eagle
 	LABEL default
-	#TESTING
 	TOOLCHAIN arm-linux-gnueabihf
 	ROMFSROOT px4fmu_common
 	DRIVERS
@@ -108,7 +107,6 @@ px4_add_board(
 		sd_bench
 		shutdown
 		system_time
-		#tests # tests and test runner
 		#top
 		topic_listener
 		tune_control

boards/atlflight/excelsior/default.cmake

@@ -39,7 +39,6 @@ px4_add_board(
 	VENDOR atlflight
 	MODEL excelsior
 	LABEL default
-	#TESTING
 	TOOLCHAIN arm-oemllib32-linux-gnueabi
 	DRIVERS
 		#barometer # all available barometer drivers
@@ -106,7 +105,6 @@ px4_add_board(
 		sd_bench
 		shutdown
 		system_time
-		#tests # tests and test runner
 		#top
 		topic_listener
 		tune_control

boards/av/x-v1/default.cmake

@@ -7,7 +7,6 @@ px4_add_board(
 	TOOLCHAIN arm-none-eabi
 	ARCHITECTURE cortex-m7
 	ROMFSROOT px4fmu_common
-	TESTING
 	UAVCAN_INTERFACES 2
 	ETHERNET
 	SERIAL_PORTS
@@ -47,7 +46,6 @@ px4_add_board(
 		roboclaw
 		rpm
 		telemetry # all available telemetry drivers
-		test_ppm
 		#tone_alarm
 		uavcan
 	MODULES
@@ -108,7 +106,6 @@ px4_add_board(
 		sd_bench
 		serial_test
 		system_time
-		tests # tests and test runner
 		top
 		topic_listener
 		tune_control
@@ -117,15 +114,15 @@ px4_add_board(
 		work_queue
 	EXAMPLES
 		fake_gps
-		fake_gyro
-		fake_magnetometer
-		fixedwing_control # Tutorial code from https://px4.io/dev/example_fixedwing_control
-		hello
-		hwtest # Hardware test
+		#fake_gyro
+		#fake_magnetometer
+		#fixedwing_control # Tutorial code from https://px4.io/dev/example_fixedwing_control
+		#hello
+		#hwtest # Hardware test
 		#matlab_csv_serial
-		px4_mavlink_debug # Tutorial code from http://dev.px4.io/en/debug/debug_values.html
-		px4_simple_app # Tutorial code from http://dev.px4.io/en/apps/hello_sky.html
-		rover_steering_control # Rover example app
-		uuv_example_app
-		work_item
+		#px4_mavlink_debug # Tutorial code from http://dev.px4.io/en/debug/debug_values.html
+		#px4_simple_app # Tutorial code from http://dev.px4.io/en/apps/hello_sky.html
+		#rover_steering_control # Rover example app
+		#uuv_example_app
+		#work_item
 	)

boards/cuav/nora/default.cmake

@@ -113,7 +113,6 @@ px4_add_board(
 		sd_bench
 		serial_test
 		system_time
-		#tests # tests and test runner
 		top
 		topic_listener
 		tune_control

boards/cuav/x7pro/default.cmake

@@ -114,7 +114,6 @@ px4_add_board(
 		sd_bench
 		serial_test
 		system_time
-		#tests # tests and test runner
 		top
 		topic_listener
 		tune_control

boards/cubepilot/cubeorange/default.cmake

@@ -9,7 +9,6 @@ px4_add_board(
 	ROMFSROOT px4fmu_common
 	BUILD_BOOTLOADER
 	IO cubepilot_io-v2_default
-	TESTING
 	UAVCAN_INTERFACES 2
 	SERIAL_PORTS
 		TEL1:/dev/ttyS0
@@ -51,7 +50,6 @@ px4_add_board(
 		roboclaw
 		rpm
 		telemetry # all available telemetry drivers
-		#test_ppm
 		tone_alarm
 		uavcan
 	MODULES
@@ -113,7 +111,6 @@ px4_add_board(
 		sd_bench
 		#serial_test
 		system_time
-		#tests # tests and test runner
 		top
 		topic_listener
 		tune_control

boards/cubepilot/cubeorange/test.cmake

@@ -3,7 +3,7 @@ px4_add_board(
 	PLATFORM nuttx
 	VENDOR cubepilot
 	MODEL cubeorange
-	LABEL console
+	LABEL test
 	TOOLCHAIN arm-none-eabi
 	ARCHITECTURE cortex-m7
 	ROMFSROOT px4fmu_common

boards/cubepilot/cubeyellow/default.cmake

@@ -8,7 +8,6 @@ px4_add_board(
 	ARCHITECTURE cortex-m7
 	ROMFSROOT px4fmu_common
 	IO cubepilot_io-v2_default
-	TESTING
 	UAVCAN_INTERFACES 2
 	SERIAL_PORTS
 		TEL1:/dev/ttyS0
@@ -49,7 +48,6 @@ px4_add_board(
 		roboclaw
 		rpm
 		telemetry # all available telemetry drivers
-		#test_ppm
 		tone_alarm
 		uavcan
 	MODULES
@@ -111,7 +109,6 @@ px4_add_board(
 		sd_bench
 		#serial_test
 		system_time
-		#tests # tests and test runner
 		top
 		topic_listener
 		tune_control

boards/cubepilot/cubeyellow/test.cmake

@@ -3,7 +3,7 @@ px4_add_board(
 	PLATFORM nuttx
 	VENDOR cubepilot
 	MODEL cubeyellow
-	LABEL console
+	LABEL test
 	TOOLCHAIN arm-none-eabi
 	ARCHITECTURE cortex-m7
 	ROMFSROOT px4fmu_common

boards/holybro/durandal-v1/default.cmake

@@ -109,7 +109,6 @@ px4_add_board(
 		sd_bench
 		serial_test
 		system_time
-		#tests # tests and test runner
 		top
 		topic_listener
 		tune_control

boards/holybro/kakutef7/default.cmake

@@ -6,6 +6,7 @@ px4_add_board(
 	LABEL default
 	TOOLCHAIN arm-none-eabi
 	ARCHITECTURE cortex-m7
+	EXTERNAL_METADATA
 	ROMFSROOT px4fmu_common
 	SERIAL_PORTS
 		TEL1:/dev/ttyS0 # UART1

boards/holybro/pix32v5/default.cmake

@@ -8,7 +8,6 @@ px4_add_board(
 	ARCHITECTURE cortex-m7
 	ROMFSROOT px4fmu_common
 	IO px4_io-v2_default
-	TESTING
 	UAVCAN_INTERFACES 2
 	SERIAL_PORTS
 		GPS1:/dev/ttyS0
@@ -53,7 +52,6 @@ px4_add_board(
 		rpm
 		safety_button
 		telemetry # all available telemetry drivers
-		test_ppm
 		tone_alarm
 		uavcan
 	MODULES
@@ -115,7 +113,6 @@ px4_add_board(
 		sd_bench
 		serial_test
 		system_time
-		tests # tests and test runner
 		top
 		topic_listener
 		tune_control
@@ -125,15 +122,15 @@ px4_add_board(
 		work_queue
 	EXAMPLES
 		fake_gps
-		fake_gyro
-		fake_magnetometer
-		fixedwing_control # Tutorial code from https://px4.io/dev/example_fixedwing_control
-		hello
-		hwtest # Hardware test
+		#fake_gyro
+		#fake_magnetometer
+		#fixedwing_control # Tutorial code from https://px4.io/dev/example_fixedwing_control
+		#hello
+		#hwtest # Hardware test
 		#matlab_csv_serial
-		px4_mavlink_debug # Tutorial code from http://dev.px4.io/en/debug/debug_values.html
-		px4_simple_app # Tutorial code from http://dev.px4.io/en/apps/hello_sky.html
-		rover_steering_control # Rover example app
-		uuv_example_app
-		work_item
+		#px4_mavlink_debug # Tutorial code from http://dev.px4.io/en/debug/debug_values.html
+		#px4_simple_app # Tutorial code from http://dev.px4.io/en/apps/hello_sky.html
+		#rover_steering_control # Rover example app
+		#uuv_example_app
+		#work_item
 	)

boards/holybro/pix32v5/test.cmake

@@ -0,0 +1,139 @@
+
+px4_add_board(
+	PLATFORM nuttx
+	VENDOR holybro
+	MODEL pix32v5
+	LABEL test
+	TOOLCHAIN arm-none-eabi
+	ARCHITECTURE cortex-m7
+	ROMFSROOT px4fmu_common
+	IO px4_io-v2_default
+	TESTING
+	UAVCAN_INTERFACES 2
+	SERIAL_PORTS
+		GPS1:/dev/ttyS0
+		TEL1:/dev/ttyS1
+		TEL2:/dev/ttyS2
+		TEL3:/dev/ttyS4
+		TEL4:/dev/ttyS3
+	DRIVERS
+		adc/ads1115
+		adc/board_adc
+		barometer # all available barometer drivers
+		batt_smbus
+		camera_capture
+		camera_trigger
+		differential_pressure # all available differential pressure drivers
+		distance_sensor # all available distance sensor drivers
+		dshot
+		gps
+		#heater
+		#imu # all available imu drivers
+		imu/analog_devices/adis16448
+		imu/bosch/bmi055
+		imu/invensense/icm20602
+		imu/invensense/icm20689
+		imu/invensense/icm20948 # required for ak09916 mag
+		irlock
+		lights # all available light drivers
+		lights/rgbled_pwm
+		magnetometer # all available magnetometer drivers
+		optical_flow # all available optical flow drivers
+		osd
+		pca9685
+		pca9685_pwm_out
+		power_monitor/ina226
+		#protocol_splitter
+		pwm_input
+		pwm_out_sim
+		pwm_out
+		px4io
+		rc_input
+		roboclaw
+		rpm
+		safety_button
+		telemetry # all available telemetry drivers
+		test_ppm
+		tone_alarm
+		uavcan
+	MODULES
+		airspeed_selector
+		attitude_estimator_q
+		battery_status
+		camera_feedback
+		commander
+		dataman
+		ekf2
+		esc_battery
+		events
+		flight_mode_manager
+		fw_att_control
+		fw_pos_control_l1
+		gyro_calibration
+		gyro_fft
+		land_detector
+		landing_target_estimator
+		load_mon
+		local_position_estimator
+		logger
+		mavlink
+		mc_att_control
+		mc_hover_thrust_estimator
+		mc_pos_control
+		mc_rate_control
+		#micrortps_bridge
+		navigator
+		rc_update
+		rover_pos_control
+		sensors
+		sih
+		temperature_compensation
+		uuv_att_control
+		uuv_pos_control
+		vmount
+		vtol_att_control
+	SYSTEMCMDS
+		bl_update
+		dmesg
+		dumpfile
+		esc_calib
+		gpio
+		hardfault_log
+		i2cdetect
+		led_control
+		mft
+		mixer
+		motor_ramp
+		motor_test
+		mtd
+		nshterm
+		param
+		perf
+		pwm
+		reboot
+		reflect
+		sd_bench
+		serial_test
+		system_time
+		tests # tests and test runner
+		top
+		topic_listener
+		tune_control
+		uorb
+		usb_connected
+		ver
+		work_queue
+	EXAMPLES
+		fake_gps
+		fake_gyro
+		fake_magnetometer
+		fixedwing_control # Tutorial code from https://px4.io/dev/example_fixedwing_control
+		hello
+		hwtest # Hardware test
+		#matlab_csv_serial
+		px4_mavlink_debug # Tutorial code from http://dev.px4.io/en/debug/debug_values.html
+		px4_simple_app # Tutorial code from http://dev.px4.io/en/apps/hello_sky.html
+		rover_steering_control # Rover example app
+		uuv_example_app
+		work_item
+	)

boards/modalai/fc-v1/default.cmake

@@ -7,7 +7,6 @@ px4_add_board(
 	TOOLCHAIN arm-none-eabi
 	ARCHITECTURE cortex-m7
 	ROMFSROOT px4fmu_common
-	TESTING
 	UAVCAN_INTERFACES 1
 	SERIAL_PORTS
 		GPS1:/dev/ttyS0 # UART1  / J10
@@ -47,7 +46,6 @@ px4_add_board(
 		rpm
 		safety_button
 		telemetry # all available telemetry drivers
-		test_ppm
 		#tone_alarm
 		uavcan
 	MODULES
@@ -108,7 +106,6 @@ px4_add_board(
 		sd_bench
 		serial_test
 		system_time
-		tests # tests and test runner
 		top
 		topic_listener
 		tune_control
@@ -118,15 +115,15 @@ px4_add_board(
 		work_queue
 	EXAMPLES
 		fake_gps
-		fake_gyro
-		fake_magnetometer
-		fixedwing_control # Tutorial code from https://px4.io/dev/example_fixedwing_control
-		hello
-		hwtest # Hardware test
+		#fake_gyro
+		#fake_magnetometer
+		#fixedwing_control # Tutorial code from https://px4.io/dev/example_fixedwing_control
+		#hello
+		#hwtest # Hardware test
 		#matlab_csv_serial
-		px4_mavlink_debug # Tutorial code from http://dev.px4.io/en/debug/debug_values.html
-		px4_simple_app # Tutorial code from http://dev.px4.io/en/apps/hello_sky.html
-		rover_steering_control # Rover example app
-		uuv_example_app
-		work_item
+		#px4_mavlink_debug # Tutorial code from http://dev.px4.io/en/debug/debug_values.html
+		#px4_simple_app # Tutorial code from http://dev.px4.io/en/apps/hello_sky.html
+		#rover_steering_control # Rover example app
+		#uuv_example_app
+		#work_item
 	)

boards/modalai/fc-v1/init/rc.board_defaults

@@ -18,88 +18,10 @@
 # Common settings across Flight Core configurations
 #
 
-# Disable safety switch by default (pull high to 3.3V to enable)
-#  V106 - J13 pin 5
-#  V110 - J1011 pin 5
-param set-default CBRK_IO_SAFETY 22027
-
-#
-# Stand Alone configuration
-#
-if ver hwtypecmp V106
-then
-	echo "Configuring Flight Core - V106"
-
-	#
-	# In Flight Core, J1 can be setup to be used as a serial port for TELEM2
-	# and connected to VOXL via cables.  We'll configure this out of the box.
-	# The user can later change this if they want, as these are configurable
-	# and not necessarily required to be used with VOXL.
-	#
-	if [ $AUTOCNF = no ]
-	then
-		if param compare MAV_1_CONFIG 0
-		then
-			echo "V106 - Defualt configuration TELEM2 on /dev/ttyS4 at 921600 in Normal Mode"
-			# TELEM2
-			param set-default MAV_1_CONFIG 102
-			# Onboard
-			param set-default MAV_1_MODE 2
-			# VIO data
-			param set-default SER_TEL2_BAUD 921600
-		fi
-	fi
-
-	# User is setting defaults, so let's do it!
-	if [ $AUTOCNF = yes ]
-	then
-		echo "V106 - Auto Configuring TELEM2 on /dev/ttyS4 at 921600 in Normal Mode"
-		# TELEM2
-		param set-default MAV_1_CONFIG 102
-		# Onboard
-		param set-default MAV_1_MODE 2
-		# VIO data
-		param set-default SER_TEL2_BAUD 921600
-	fi
-fi
-
-#
-# VOXL-Flight configuration
-#
-if ver hwtypecmp V110
-then
-	echo "Configuring VOXL-Flight - V110"
-
-	#
-	# TELEM2 port is physically routed in the PCB, thus not configurable.
-	# The following will detect a fresh install, or if the user has changed the setting and
-	# revert to the VOXL-Flight defaults.  This does allow the user to change the mode and
-	# baud rates and mode if they choose to do so, although VOXL is expecting what is set below
-	#
-	if [ $AUTOCNF = no ]
-	then
-		if ! param compare MAV_1_CONFIG 102
-		then
-			echo "V110 - Default configuration TELEM2 on /dev/ttyS4 at 921600 in Normal Mode"
-			# TELEM2
-			param set-default MAV_1_CONFIG 102
-			# Onboard
-			param set-default MAV_1_MODE 2
-			param set-default SER_TEL2_BAUD 921600
-		fi
-	fi
-
-	# User is setting defaults, so let's do it!
-	if [ $AUTOCNF = yes ]
-	then
-		echo "V110 - Auto Configuring TELEM2 on /dev/ttyS4 at 921600 in Normal Mode"
-		# TELEM2
-		param set-default MAV_1_CONFIG 102
-		# Onboard
-		param set-default MAV_1_MODE 2
-		param set-default SER_TEL2_BAUD 921600
-	fi
-fi
 
+# TELEM2
+param set-default MAV_1_CONFIG 102
+param set-default MAV_1_MODE 2
+param set-default SER_TEL2_BAUD 921600
 
 safety_button start

boards/modalai/fc-v1/rtps.cmake

@@ -7,7 +7,6 @@ px4_add_board(
 	TOOLCHAIN arm-none-eabi
 	ARCHITECTURE cortex-m7
 	ROMFSROOT px4fmu_common
-	TESTING
 	UAVCAN_INTERFACES 1
 	SERIAL_PORTS
 		GPS1:/dev/ttyS0 # UART1  / J10
@@ -47,7 +46,6 @@ px4_add_board(
 		rpm
 		safety_button
 		telemetry # all available telemetry drivers
-		test_ppm
 		#tone_alarm
 		uavcan
 	MODULES
@@ -108,7 +106,6 @@ px4_add_board(
 		sd_bench
 		serial_test
 		system_time
-		tests # tests and test runner
 		top
 		topic_listener
 		tune_control
@@ -118,15 +115,15 @@ px4_add_board(
 		work_queue
 	EXAMPLES
 		fake_gps
-		fake_gyro
-		fake_magnetometer
-		fixedwing_control # Tutorial code from https://px4.io/dev/example_fixedwing_control
-		hello
-		hwtest # Hardware test
+		#fake_gyro
+		#fake_magnetometer
+		#fixedwing_control # Tutorial code from https://px4.io/dev/example_fixedwing_control
+		#hello
+		#hwtest # Hardware test
 		#matlab_csv_serial
-		px4_mavlink_debug # Tutorial code from http://dev.px4.io/en/debug/debug_values.html
-		px4_simple_app # Tutorial code from http://dev.px4.io/en/apps/hello_sky.html
-		rover_steering_control # Rover example app
-		uuv_example_app
-		work_item
+		#px4_mavlink_debug # Tutorial code from http://dev.px4.io/en/debug/debug_values.html
+		#px4_simple_app # Tutorial code from http://dev.px4.io/en/apps/hello_sky.html
+		#rover_steering_control # Rover example app
+		#uuv_example_app
+		#work_item
 	)

boards/modalai/fc-v1/test.cmake

@@ -0,0 +1,132 @@
+
+px4_add_board(
+	PLATFORM nuttx
+	VENDOR modalai
+	MODEL fc-v1
+	LABEL test
+	TOOLCHAIN arm-none-eabi
+	ARCHITECTURE cortex-m7
+	ROMFSROOT px4fmu_common
+	TESTING
+	UAVCAN_INTERFACES 1
+	SERIAL_PORTS
+		GPS1:/dev/ttyS0 # UART1  / J10
+		TEL1:/dev/ttyS6 # UART7  / J5
+		TEL2:/dev/ttyS4 # UART5  / J1
+		TEL3:/dev/ttyS1 # USART2 / J4
+	DRIVERS
+		adc/ads1115
+		adc/board_adc
+		barometer # all available barometer drivers
+		batt_smbus
+		camera_capture
+		camera_trigger
+		differential_pressure # all available differential pressure drivers
+		distance_sensor # all available distance sensor drivers
+		dshot
+		gps
+		imu/bosch/bmi088
+		imu/invensense/icm20602
+		imu/invensense/icm20948 # required for ak09916 mag
+		imu/invensense/icm42688p
+		irlock
+		lights # all available light drivers
+		magnetometer # all available magnetometer drivers
+		optical_flow # all available optical flow drivers
+		osd
+		pca9685
+		pca9685_pwm_out
+		power_monitor/ina226
+		power_monitor/voxlpm
+		#protocol_splitter
+		#pwm_input
+		pwm_out_sim
+		pwm_out
+		rc_input
+		roboclaw
+		rpm
+		safety_button
+		telemetry # all available telemetry drivers
+		test_ppm
+		#tone_alarm
+		uavcan
+	MODULES
+		airspeed_selector
+		attitude_estimator_q
+		camera_feedback
+		commander
+		dataman
+		ekf2
+		esc_battery
+		events
+		flight_mode_manager
+		fw_att_control
+		fw_pos_control_l1
+		gyro_calibration
+		gyro_fft
+		land_detector
+		landing_target_estimator
+		load_mon
+		local_position_estimator
+		logger
+		mavlink
+		mc_att_control
+		mc_hover_thrust_estimator
+		mc_pos_control
+		mc_rate_control
+		#micrortps_bridge
+		navigator
+		rc_update
+		rover_pos_control
+		sensors
+		sih
+		temperature_compensation
+		uuv_att_control
+		uuv_pos_control
+		vmount
+		vtol_att_control
+	SYSTEMCMDS
+		bl_update
+		dmesg
+		dumpfile
+		esc_calib
+		gpio
+		hardfault_log
+		i2cdetect
+		led_control
+		mft
+		mixer
+		motor_ramp
+		motor_test
+		mtd
+		nshterm
+		param
+		perf
+		pwm
+		reboot
+		reflect
+		sd_bench
+		serial_test
+		system_time
+		tests # tests and test runner
+		top
+		topic_listener
+		tune_control
+		uorb
+		usb_connected
+		ver
+		work_queue
+	EXAMPLES
+		fake_gps
+		fake_gyro
+		fake_magnetometer
+		fixedwing_control # Tutorial code from https://px4.io/dev/example_fixedwing_control
+		hello
+		hwtest # Hardware test
+		#matlab_csv_serial
+		px4_mavlink_debug # Tutorial code from http://dev.px4.io/en/debug/debug_values.html
+		px4_simple_app # Tutorial code from http://dev.px4.io/en/apps/hello_sky.html
+		rover_steering_control # Rover example app
+		uuv_example_app
+		work_item
+	)

boards/mro/cannode/canbootloader.cmake

@@ -1,13 +0,0 @@
-include (${CMAKE_CURRENT_LIST_DIR}/uavcan_board_identity)
-
-px4_add_board(
-	PLATFORM nuttx
-	VENDOR ark
-	MODEL can-flow
-	LABEL canbootloader
-	TOOLCHAIN arm-none-eabi
-	ARCHITECTURE cortex-m4
-	CONSTRAINED_MEMORY
-	DRIVERS
-		bootloaders
-)

boards/mro/cannode/default.cmake

@@ -1,25 +0,0 @@
-include (${CMAKE_CURRENT_LIST_DIR}/uavcan_board_identity)
-
-px4_add_board(
-	PLATFORM nuttx
-	VENDOR mro
-	MODEL cannode
-	LABEL default
-	TOOLCHAIN arm-none-eabi
-	ARCHITECTURE cortex-m4
-	CONSTRAINED_FLASH
-	CONSTRAINED_MEMORY
-	ROMFSROOT cannode
-	UAVCAN_INTERFACES 1
-	UAVCAN_TIMER_OVERRIDE 3
-	DRIVERS
-		barometer/dps310
-		bootloaders
-		#gps
-		lights/rgbled_ncp5623c
-		magnetometer/rm3100
-		uavcannode
-	MODULES
-	SYSTEMCMDS
-		param
-)

boards/mro/cannode/firmware.prototype

@@ -1,13 +0,0 @@
-{
-    "board_id": 1004,
-    "magic": "PX4FWv1",
-    "description": "Firmware for the mRO CANnode board",
-    "image": "",
-    "build_time": 0,
-    "summary": "mROCANNode",
-    "version": "0.1",
-    "image_size": 0,
-    "image_maxsize": 2080768,
-    "git_identity": "",
-    "board_revision": 0
-}

boards/mro/cannode/init/rc.board_defaults

@@ -1,9 +0,0 @@
-#!/bin/sh
-#
-# board specific defaults
-#------------------------------------------------------------------------------
-
-if [ $AUTOCNF = yes ]
-then
-
-fi

boards/mro/cannode/init/rc.board_sensors

@@ -1,8 +0,0 @@
-#!/bin/sh
-#
-# board sensors init
-#------------------------------------------------------------------------------
-
-rm3100 -s start
-
-dps310 -I start

boards/mro/cannode/nuttx-config/canbootloader/defconfig

@@ -1,61 +0,0 @@
-#
-# This file is autogenerated: PLEASE DO NOT EDIT IT.
-#
-# You can use "make menuconfig" to make any modifications to the installed .config file.
-# You can then do "make savedefconfig" to generate a new defconfig file that includes your
-# modifications.
-#
-CONFIG_ARCH="arm"
-CONFIG_ARCH_BOARD_CUSTOM=y
-CONFIG_ARCH_BOARD_CUSTOM_DIR="../nuttx-config"
-CONFIG_ARCH_BOARD_CUSTOM_DIR_RELPATH=y
-CONFIG_ARCH_BOARD_CUSTOM_NAME="px4"
-CONFIG_ARCH_CHIP="stm32"
-CONFIG_ARCH_CHIP_STM32=y
-CONFIG_ARCH_CHIP_STM32F303CC=y
-CONFIG_ARCH_INTERRUPTSTACK=4096
-CONFIG_ARMV7M_MEMCPY=y
-CONFIG_ARMV7M_USEBASEPRI=y
-CONFIG_BINFMT_DISABLE=y
-CONFIG_BOARD_LOOPSPERMSEC=16717
-CONFIG_C99_BOOL8=y
-CONFIG_CLOCK_MONOTONIC=y
-CONFIG_DEBUG_FULLOPT=y
-CONFIG_DEBUG_SYMBOLS=y
-CONFIG_DEFAULT_SMALL=y
-CONFIG_DISABLE_MOUNTPOINT=y
-CONFIG_DISABLE_MQUEUE=y
-CONFIG_DISABLE_PTHREAD=y
-CONFIG_EXPERIMENTAL=y
-CONFIG_FDCLONE_DISABLE=y
-CONFIG_FDCLONE_STDIO=y
-CONFIG_HAVE_CXX=y
-CONFIG_HAVE_CXXINITIALIZE=y
-CONFIG_IDLETHREAD_STACKSIZE=4096
-CONFIG_LIBC_FLOATINGPOINT=y
-CONFIG_LIBC_LONG_LONG=y
-CONFIG_LIBC_STRERROR=y
-CONFIG_LIB_BOARDCTL=y
-CONFIG_MAX_TASKS=0
-CONFIG_MM_REGIONS=2
-CONFIG_NAME_MAX=0
-CONFIG_NUNGET_CHARS=0
-CONFIG_PREALLOC_TIMERS=0
-CONFIG_PTHREAD_STACK_MIN=512
-CONFIG_RAM_SIZE=262144
-CONFIG_RAM_START=0x20010000
-CONFIG_RAW_BINARY=y
-CONFIG_SDCLONE_DISABLE=y
-CONFIG_SIG_DEFAULT=y
-CONFIG_SIG_SIGALRM_ACTION=y
-CONFIG_SIG_SIGUSR1_ACTION=y
-CONFIG_SIG_SIGUSR2_ACTION=y
-CONFIG_STACK_COLORATION=y
-CONFIG_START_DAY=30
-CONFIG_START_MONTH=11
-CONFIG_STDIO_DISABLE_BUFFERING=y
-CONFIG_STM32_NOEXT_VECTORS=y
-CONFIG_STM32_TIM8=y
-CONFIG_TASK_NAME_SIZE=0
-CONFIG_USEC_PER_TICK=1000
-CONFIG_USERMAIN_STACKSIZE=4096

boards/mro/cannode/nuttx-config/include/board.h

@@ -1,144 +0,0 @@
-/************************************************************************************
- * configs/px4fmu/include/board.h
- * include/arch/board/board.h
- *
- *   Copyright (C) 2009 Gregory Nutt. All rights reserved.
- *   Author: Gregory Nutt <gnutt@nuttx.org>
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- * 3. Neither the name NuttX nor the names of its contributors may be
- *    used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ************************************************************************************/
-
-#ifndef __ARCH_BOARD_BOARD_H
-#define __ARCH_BOARD_BOARD_H
-
-#include <nuttx/config.h>
-#ifndef __ASSEMBLY__
-# include <stdint.h>
-#endif
-
-#include <stm32.h>
-
-/* Clocking *****************************************************************/
-
-/* HSI - Internal 8 MHz RC Oscillator
- * LSI - 32 KHz RC
- * HSE - 8 MHz from MCO output of ST-LINK
- * LSE - 32.768 kHz
- */
-
-#define STM32_BOARD_XTAL        8000000ul        /* X1 on board */
-
-#define STM32_HSEBYP_ENABLE
-#define STM32_HSI_FREQUENCY     8000000ul
-#define STM32_LSI_FREQUENCY     40000            /* Between 30kHz and 60kHz */
-#define STM32_HSE_FREQUENCY     STM32_BOARD_XTAL
-#define STM32_LSE_FREQUENCY     0
-
-/* PLL source is HSE/1, PLL multipler is 9: PLL frequency is 8MHz (XTAL) x 9 = 72MHz */
-#define STM32_CFGR_PLLSRC       RCC_CFGR_PLLSRC
-#define STM32_CFGR_PLLXTPRE     0
-#define STM32_CFGR_PLLMUL       RCC_CFGR_PLLMUL_CLKx9
-#define STM32_PLL_FREQUENCY     (9*STM32_BOARD_XTAL)
-
-/* Use the PLL and set the SYSCLK source to be the PLL */
-#define STM32_SYSCLK_SW         RCC_CFGR_SW_PLL
-#define STM32_SYSCLK_SWS        RCC_CFGR_SWS_PLL
-#define STM32_SYSCLK_FREQUENCY  STM32_PLL_FREQUENCY
-
-/* AHB clock (HCLK) is SYSCLK (72MHz) */
-#define STM32_RCC_CFGR_HPRE     RCC_CFGR_HPRE_SYSCLK
-#define STM32_HCLK_FREQUENCY    STM32_SYSCLK_FREQUENCY
-#define STM32_BOARD_HCLK        STM32_HCLK_FREQUENCY      /* same as above, to satisfy compiler */
-
-/* APB2 clock (PCLK2) is HCLK (72MHz) */
-#define STM32_RCC_CFGR_PPRE2    RCC_CFGR_PPRE2_HCLK
-#define STM32_PCLK2_FREQUENCY   STM32_HCLK_FREQUENCY
-#define STM32_APB2_CLKIN        (STM32_PCLK2_FREQUENCY)   /* Timers 1 and 8, 15-17 */
-
-/* APB2 timers 1 and 8, 15-17 will receive PCLK2. */
-
-/* Timers driven from APB2 will be PCLK2 */
-#define STM32_APB2_TIM1_CLKIN   (STM32_PCLK2_FREQUENCY)
-#define STM32_APB2_TIM8_CLKIN   (STM32_PCLK2_FREQUENCY)
-#define STM32_APB1_TIM15_CLKIN  (STM32_PCLK2_FREQUENCY)
-#define STM32_APB1_TIM16_CLKIN  (STM32_PCLK2_FREQUENCY)
-#define STM32_APB1_TIM17_CLKIN  (STM32_PCLK2_FREQUENCY)
-
-/* APB1 clock (PCLK1) is HCLK/2 (36MHz) */
-#define STM32_RCC_CFGR_PPRE1    RCC_CFGR_PPRE1_HCLKd2
-#define STM32_PCLK1_FREQUENCY   (STM32_HCLK_FREQUENCY/2)
-
-/* APB1 timers 2-7 will be twice PCLK1 */
-#define STM32_APB1_TIM2_CLKIN   (2*STM32_PCLK1_FREQUENCY)
-#define STM32_APB1_TIM3_CLKIN   (2*STM32_PCLK1_FREQUENCY)
-#define STM32_APB1_TIM4_CLKIN   (2*STM32_PCLK1_FREQUENCY)
-#define STM32_APB1_TIM6_CLKIN   (2*STM32_PCLK1_FREQUENCY)
-#define STM32_APB1_TIM7_CLKIN   (2*STM32_PCLK1_FREQUENCY)
-
-/* USB divider -- Divide PLL clock by 1.5 */
-#define STM32_CFGR_USBPRE       0
-
-/* Timer Frequencies, if APBx is set to 1, frequency is same to APBx
- * otherwise frequency is 2xAPBx.
- * Note: TIM1,8 are on APB2, others on APB1
- */
-#define BOARD_TIM1_FREQUENCY   STM32_HCLK_FREQUENCY
-#define BOARD_TIM2_FREQUENCY   (STM32_HCLK_FREQUENCY / 2)
-#define BOARD_TIM3_FREQUENCY   (STM32_HCLK_FREQUENCY / 2)
-#define BOARD_TIM4_FREQUENCY   (STM32_HCLK_FREQUENCY / 2)
-#define BOARD_TIM5_FREQUENCY   (STM32_HCLK_FREQUENCY / 2)
-#define BOARD_TIM6_FREQUENCY   (STM32_HCLK_FREQUENCY / 2)
-#define BOARD_TIM7_FREQUENCY   (STM32_HCLK_FREQUENCY / 2)
-#define BOARD_TIM8_FREQUENCY   STM32_HCLK_FREQUENCY
-
-
-/* Alternate function pin selections ************************************************/
-
-/* UARTs */
-#define GPIO_USART1_TX	GPIO_USART1_TX_1 /* PA9  */
-#define GPIO_USART1_RX	GPIO_USART1_RX_1 /* PA10 */
-
-#define GPIO_USART2_TX	GPIO_USART2_TX_2 /* PA2  */
-#define GPIO_USART2_RX	GPIO_USART2_RX_2 /* PA3  */
-
-/* CAN */
-#define GPIO_CAN1_RX	GPIO_CAN_RX_2    /* PA11 */
-#define GPIO_CAN1_TX	GPIO_CAN_TX_2    /* PA12 */
-
-/* I2C */
-#define GPIO_I2C1_SCL	GPIO_I2C1_SCL_2  /* PB6 */
-#define GPIO_I2C1_SDA	GPIO_I2C1_SDA_2  /* PB7 */
-
-/* SPI */
-#define GPIO_SPI1_SCK   GPIO_SPI1_SCK_1  /* PA5 */
-#define GPIO_SPI1_MISO  GPIO_SPI1_MISO_1 /* PA6 */
-#define GPIO_SPI1_MOSI  GPIO_SPI1_MOSI_1 /* PA7 */
-
-
-#endif /* __ARCH_BOARD_BOARD_H */

boards/mro/cannode/nuttx-config/include/board_dma_map.h

@@ -1,45 +0,0 @@
-/****************************************************************************
- *
- *   Copyright (c) 2021 PX4 Development Team. All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- * 3. Neither the name PX4 nor the names of its contributors may be
- *    used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ****************************************************************************/
-
-#pragma once
-
-// DMA1 Channel/Stream Selections
-//--------------------------------------------//---------------------------//----------------
-
-
-//  DMA2 Channel/Stream Selections
-//--------------------------------------------//---------------------------//----------------
-#define DMACHAN_SPI1_RX    DMAMAP_SPI1_RX_2   // DMA2, Stream 2, Channel 3
-#define DMACHAN_SPI2_RX    DMAMAP_SPI2_RX     // DMA2, Stream 3, Channel 0
-#define DMACHAN_SPI2_TX    DMAMAP_SPI2_TX     // DMA2, Stream 4, Channel 0
-#define DMACHAN_SPI1_TX    DMAMAP_SPI1_TX_1   // DMA2, Stream 5, Channel 3

boards/mro/cannode/nuttx-config/nsh/defconfig

@@ -1,148 +0,0 @@
-#
-# This file is autogenerated: PLEASE DO NOT EDIT IT.
-#
-# You can use "make menuconfig" to make any modifications to the installed .config file.
-# You can then do "make savedefconfig" to generate a new defconfig file that includes your
-# modifications.
-#
-# CONFIG_DISABLE_OS_API is not set
-# CONFIG_DISABLE_PSEUDOFS_OPERATIONS is not set
-# CONFIG_NSH_DISABLEBG is not set
-# CONFIG_NSH_DISABLESCRIPT is not set
-# CONFIG_NSH_DISABLE_DF is not set
-# CONFIG_NSH_DISABLE_EXEC is not set
-# CONFIG_NSH_DISABLE_EXIT is not set
-# CONFIG_NSH_DISABLE_GET is not set
-# CONFIG_NSH_DISABLE_ITEF is not set
-# CONFIG_NSH_DISABLE_LOOPS is not set
-# CONFIG_NSH_DISABLE_SEMICOLON is not set
-# CONFIG_NSH_DISABLE_TIME is not set
-CONFIG_ARCH="arm"
-CONFIG_ARCH_BOARD_CUSTOM=y
-CONFIG_ARCH_BOARD_CUSTOM_DIR="../nuttx-config"
-CONFIG_ARCH_BOARD_CUSTOM_DIR_RELPATH=y
-CONFIG_ARCH_BOARD_CUSTOM_NAME="px4"
-CONFIG_ARCH_CHIP="stm32"
-CONFIG_ARCH_CHIP_STM32=y
-CONFIG_ARCH_CHIP_STM32F303CC=y
-CONFIG_ARCH_INTERRUPTSTACK=512
-CONFIG_ARCH_STACKDUMP=y
-CONFIG_BOARDCTL_RESET=y
-CONFIG_BOARD_LOOPSPERMSEC=6522
-CONFIG_BOARD_RESET_ON_ASSERT=2
-CONFIG_BUILTIN=y
-CONFIG_C99_BOOL8=y
-CONFIG_CLOCK_MONOTONIC=y
-CONFIG_DEBUG_FULLOPT=y
-CONFIG_DEBUG_HARDFAULT_ALERT=y
-CONFIG_DEBUG_SYMBOLS=y
-CONFIG_DEFAULT_SMALL=y
-CONFIG_DEV_FIFO_SIZE=0
-CONFIG_DEV_PIPE_MAXSIZE=1024
-CONFIG_DEV_PIPE_SIZE=70
-CONFIG_FDCLONE_STDIO=y
-CONFIG_FS_BINFS=y
-CONFIG_FS_CROMFS=y
-CONFIG_FS_FAT=y
-CONFIG_FS_FATTIME=y
-CONFIG_FS_PROCFS=y
-CONFIG_FS_PROCFS_INCLUDE_PROGMEM=y
-CONFIG_FS_PROCFS_REGISTER=y
-CONFIG_FS_ROMFS=y
-CONFIG_GRAN=y
-CONFIG_GRAN_INTR=y
-CONFIG_HAVE_CXX=y
-CONFIG_HAVE_CXXINITIALIZE=y
-CONFIG_I2C=y
-CONFIG_I2C_RESET=y
-CONFIG_IDLETHREAD_STACKSIZE=750
-CONFIG_LIBC_FLOATINGPOINT=y
-CONFIG_LIBC_LONG_LONG=y
-CONFIG_LIBC_STRERROR=y
-CONFIG_MEMSET_64BIT=y
-CONFIG_MEMSET_OPTSPEED=y
-CONFIG_MTD=y
-CONFIG_MTD_BYTE_WRITE=y
-CONFIG_MTD_PARTITION=y
-CONFIG_MTD_RAMTRON=y
-CONFIG_NAME_MAX=40
-CONFIG_NFILE_DESCRIPTORS=12
-CONFIG_NSH_ARCHINIT=y
-CONFIG_NSH_ARCHROMFS=y
-CONFIG_NSH_ARGCAT=y
-CONFIG_NSH_BUILTIN_APPS=y
-CONFIG_NSH_CMDPARMS=y
-CONFIG_NSH_CROMFSETC=y
-CONFIG_NSH_DISABLE_IFCONFIG=y
-CONFIG_NSH_DISABLE_IFUPDOWN=y
-CONFIG_NSH_DISABLE_MB=y
-CONFIG_NSH_DISABLE_MH=y
-CONFIG_NSH_DISABLE_MW=y
-CONFIG_NSH_DISABLE_TELNETD=y
-CONFIG_NSH_LINELEN=128
-CONFIG_NSH_MAXARGUMENTS=15
-CONFIG_NSH_NESTDEPTH=8
-CONFIG_NSH_QUOTE=y
-CONFIG_NSH_ROMFSETC=y
-CONFIG_NSH_ROMFSSECTSIZE=128
-CONFIG_NSH_STRERROR=y
-CONFIG_NSH_VARS=y
-CONFIG_PIPES=y
-CONFIG_PREALLOC_TIMERS=50
-CONFIG_PRIORITY_INHERITANCE=y
-CONFIG_PTHREAD_MUTEX_ROBUST=y
-CONFIG_PTHREAD_STACK_MIN=512
-CONFIG_RAM_SIZE=65536
-CONFIG_RAM_START=0x20000000
-CONFIG_RAW_BINARY=y
-CONFIG_RTC_DATETIME=y
-CONFIG_SCHED_ATEXIT=y
-CONFIG_SCHED_HPWORK=y
-CONFIG_SCHED_HPWORKPRIORITY=249
-CONFIG_SCHED_HPWORKSTACKSIZE=1280
-CONFIG_SCHED_INSTRUMENTATION=y
-CONFIG_SCHED_INSTRUMENTATION_EXTERNAL=y
-CONFIG_SCHED_LPWORK=y
-CONFIG_SCHED_LPWORKPRIORITY=50
-CONFIG_SCHED_LPWORKSTACKSIZE=1632
-CONFIG_SCHED_WAITPID=y
-CONFIG_SEM_NNESTPRIO=8
-CONFIG_SEM_PREALLOCHOLDERS=0
-CONFIG_SERIAL_TERMIOS=y
-CONFIG_SIG_DEFAULT=y
-CONFIG_SIG_SIGALRM_ACTION=y
-CONFIG_SIG_SIGUSR1_ACTION=y
-CONFIG_SIG_SIGUSR2_ACTION=y
-CONFIG_SIG_SIGWORK=4
-CONFIG_STACK_COLORATION=y
-CONFIG_START_DAY=30
-CONFIG_START_MONTH=11
-CONFIG_STDIO_BUFFER_SIZE=32
-CONFIG_STM32_ADC1=y
-CONFIG_STM32_DISABLE_IDLE_SLEEP_DURING_DEBUG=y
-CONFIG_STM32_DMA1=y
-CONFIG_STM32_DMA2=y
-CONFIG_STM32_FLOWCONTROL_BROKEN=y
-CONFIG_STM32_I2C1=y
-CONFIG_STM32_JTAG_SW_ENABLE=y
-CONFIG_STM32_PWR=y
-CONFIG_STM32_RTC=y
-CONFIG_STM32_RTC_HSECLOCK=y
-CONFIG_STM32_RTC_MAGIC=0xfacefeee
-CONFIG_STM32_RTC_MAGIC_REG=1
-CONFIG_STM32_RTC_MAGIC_TIME_SET=0xfacefeef
-CONFIG_STM32_SERIALBRK_BSDCOMPAT=y
-CONFIG_STM32_SERIAL_DISABLE_REORDERING=y
-CONFIG_STM32_SPI1=y
-CONFIG_STM32_TIM8=y
-CONFIG_STM32_USART1=y
-CONFIG_STM32_USART2=y
-CONFIG_STM32_USART_BREAKS=y
-CONFIG_STM32_WWDG=y
-CONFIG_SYSTEM_NSH=y
-CONFIG_TASK_NAME_SIZE=24
-CONFIG_USART2_BAUD=57600
-CONFIG_USART2_SERIAL_CONSOLE=y
-CONFIG_USEC_PER_TICK=1000
-CONFIG_USERMAIN_STACKSIZE=2624
-CONFIG_USER_ENTRYPOINT="nsh_main"

boards/mro/cannode/nuttx-config/scripts/canbootloader_script.ld

@@ -1,134 +0,0 @@
-/****************************************************************************
- * nuttx-config/scripts/canbootloader_script.ld
- *
- *   Copyright (C) 2015 Gregory Nutt. All rights reserved.
- *   Author: Gregory Nutt <gnutt@nuttx.org>
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- * 3. Neither the name NuttX nor the names of its contributors may be
- *    used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ****************************************************************************/
-
-/* The STM32F412 has 512Kb of FLASH beginning at address 0x0800:0000 and
- * 256Kb of SRAM. SRAM is split up into three blocks:
- *
- * 1) 112Kb of SRAM beginning at address 0x2000:0000
- * 2)  16Kb of SRAM beginning at address 0x2001:c000
- * 3)  64Kb of SRAM beginning at address 0x2002:0000
- * 4)  64Kb of TCM SRAM beginning at address 0x1000:0000
- *
- * When booting from FLASH, FLASH memory is aliased to address 0x0000:0000
- * where the code expects to begin execution by jumping to the entry point in
- * the 0x0800:0000 address range.
- *
- * The first 0x10000 of flash is reserved for the bootloader.
- */
-
-MEMORY
-{
-    flash (rx)   : ORIGIN = 0x08000000, LENGTH = 32K
-    sram (rwx)   : ORIGIN = 0x20000000, LENGTH = 192K
-}
-
-OUTPUT_ARCH(arm)
-
-ENTRY(__start)		/* treat __start as the anchor for dead code stripping */
-EXTERN(_vectors)	/* force the vectors to be included in the output */
-
-/*
- * Ensure that abort() is present in the final object.  The exception handling
- * code pulled in by libgcc.a requires it (and that code cannot be easily avoided).
- */
-EXTERN(abort)
-SECTIONS
-{
-	.text : {
-		_stext = ABSOLUTE(.);
-		*(.vectors)
-		*(.text .text.*)
-		*(.fixup)
-		*(.gnu.warning)
-		*(.rodata .rodata.*)
-		*(.gnu.linkonce.t.*)
-		*(.got)
-		*(.gcc_except_table)
-		*(.gnu.linkonce.r.*)
-		_etext = ABSOLUTE(.);
-	} > flash
-
-	/*
-	 * Init functions (static constructors and the like)
-	 */
-        .init_section : {
-                _sinit = ABSOLUTE(.);
-                KEEP(*(.init_array .init_array.*))
-                _einit = ABSOLUTE(.);
-        } > flash
-
-	.ARM.extab : {
-		*(.ARM.extab*)
-	} > flash
-
-	__exidx_start = ABSOLUTE(.);
-	.ARM.exidx : {
-		*(.ARM.exidx*)
-	} > flash
-	__exidx_end = ABSOLUTE(.);
-
-	_eronly = ABSOLUTE(.);
-
-	.data : {
-		_sdata = ABSOLUTE(.);
-		*(.data .data.*)
-		*(.gnu.linkonce.d.*)
-		CONSTRUCTORS
-		_edata = ABSOLUTE(.);
-	} > sram AT > flash
-
-	.bss : {
-		_sbss = ABSOLUTE(.);
-		*(.bss .bss.*)
-		*(.gnu.linkonce.b.*)
-		*(COMMON)
-		. = ALIGN(4);
-		_ebss = ABSOLUTE(.);
-	} > sram
-
-	/* Stabs debugging sections. */
-	.stab 0 : { *(.stab) }
-	.stabstr 0 : { *(.stabstr) }
-	.stab.excl 0 : { *(.stab.excl) }
-	.stab.exclstr 0 : { *(.stab.exclstr) }
-	.stab.index 0 : { *(.stab.index) }
-	.stab.indexstr 0 : { *(.stab.indexstr) }
-	.comment 0 : { *(.comment) }
-	.debug_abbrev 0 : { *(.debug_abbrev) }
-	.debug_info 0 : { *(.debug_info) }
-	.debug_line 0 : { *(.debug_line) }
-	.debug_pubnames 0 : { *(.debug_pubnames) }
-	.debug_aranges 0 : { *(.debug_aranges) }
-}

boards/mro/cannode/nuttx-config/scripts/script.ld

@@ -1,146 +0,0 @@
-/****************************************************************************
- * scripts/ld.script
- *
- *   Copyright (C) 2011 Gregory Nutt. All rights reserved.
- *   Author: Gregory Nutt <gnutt@nuttx.org>
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- * 3. Neither the name NuttX nor the names of its contributors may be
- *    used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ****************************************************************************/
-
-/* The STM32F412 has 512Kb of FLASH beginning at address 0x0800:0000 and
- * 256Kb of SRAM. SRAM is split up into three blocks:
- *
- * 1) 112Kb of SRAM beginning at address 0x2000:0000
- * 2)  16Kb of SRAM beginning at address 0x2001:c000
- * 3)  64Kb of SRAM beginning at address 0x2002:0000
- * 4)  64Kb of TCM SRAM beginning at address 0x1000:0000
- *
- * When booting from FLASH, FLASH memory is aliased to address 0x0000:0000
- * where the code expects to begin execution by jumping to the entry point in
- * the 0x0800:0000 address range.
- *
- * The first 0x10000 of flash is reserved for the bootloader.
- */
-
-MEMORY
-{
-    flash (rx)   : ORIGIN = 0x08010000, LENGTH = 256K
-    sram (rwx)   : ORIGIN = 0x20000000, LENGTH = 64K
-}
-
-OUTPUT_ARCH(arm)
-
-ENTRY(__start)		/* treat __start as the anchor for dead code stripping */
-EXTERN(_vectors)	/* force the vectors to be included in the output */
-
-/*
- * Ensure that abort() is present in the final object.  The exception handling
- * code pulled in by libgcc.a requires it (and that code cannot be easily avoided).
- */
-EXTERN(abort)
-EXTERN(_bootdelay_signature)
-
-SECTIONS
-{
-	.text : {
-		_stext = ABSOLUTE(.);
-		*(.vectors)
-		. = ALIGN(8);
-		/*
-		* This section positions the app_descriptor_t used
-		* by the make_can_boot_descriptor.py tool to set
-		* the application image's descriptor so that the
-		* uavcan bootloader has the ability to validate the
-		* image crc, size etc
-		*/
-		KEEP(*(.app_descriptor))
-		*(.text .text.*)
-		*(.fixup)
-		*(.gnu.warning)
-		*(.rodata .rodata.*)
-		*(.gnu.linkonce.t.*)
-		*(.got)
-		*(.gcc_except_table)
-		*(.gnu.linkonce.r.*)
-		_etext = ABSOLUTE(.);
-	} > flash
-
-	/*
-	 * Init functions (static constructors and the like)
-	 */
-        .init_section : {
-                _sinit = ABSOLUTE(.);
-                KEEP(*(.init_array .init_array.*))
-                _einit = ABSOLUTE(.);
-        } > flash
-
-
-	.ARM.extab : {
-		*(.ARM.extab*)
-	} > flash
-
-	__exidx_start = ABSOLUTE(.);
-	.ARM.exidx : {
-		*(.ARM.exidx*)
-	} > flash
-	__exidx_end = ABSOLUTE(.);
-
-	_eronly = ABSOLUTE(.);
-
-	.data : {
-		_sdata = ABSOLUTE(.);
-		*(.data .data.*)
-		*(.gnu.linkonce.d.*)
-		CONSTRUCTORS
-		_edata = ABSOLUTE(.);
-	} > sram AT > flash
-
-	.bss : {
-		_sbss = ABSOLUTE(.);
-		*(.bss .bss.*)
-		*(.gnu.linkonce.b.*)
-		*(COMMON)
-		. = ALIGN(4);
-		_ebss = ABSOLUTE(.);
-	} > sram
-
-	/* Stabs debugging sections. */
-	.stab 0 : { *(.stab) }
-	.stabstr 0 : { *(.stabstr) }
-	.stab.excl 0 : { *(.stab.excl) }
-	.stab.exclstr 0 : { *(.stab.exclstr) }
-	.stab.index 0 : { *(.stab.index) }
-	.stab.indexstr 0 : { *(.stab.indexstr) }
-	.comment 0 : { *(.comment) }
-	.debug_abbrev 0 : { *(.debug_abbrev) }
-	.debug_info 0 : { *(.debug_info) }
-	.debug_line 0 : { *(.debug_line) }
-	.debug_pubnames 0 : { *(.debug_pubnames) }
-	.debug_aranges 0 : { *(.debug_aranges) }
-}

boards/mro/cannode/src/CMakeLists.txt

@@ -1,63 +0,0 @@
-############################################################################
-#
-#   Copyright (c) 2020 PX4 Development Team. All rights reserved.
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions
-# are met:
-#
-# 1. Redistributions of source code must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-# 2. Redistributions in binary form must reproduce the above copyright
-#    notice, this list of conditions and the following disclaimer in
-#    the documentation and/or other materials provided with the
-#    distribution.
-# 3. Neither the name PX4 nor the names of its contributors may be
-#    used to endorse or promote products derived from this software
-#    without specific prior written permission.
-#
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
-# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
-# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
-# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
-# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
-# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
-# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
-# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-# POSSIBILITY OF SUCH DAMAGE.
-#
-############################################################################
-
-if("${PX4_BOARD_LABEL}" STREQUAL  "canbootloader")
-
-	add_library(drivers_board
-		boot_config.h
-		boot.c
-		led.c
-	)
-	target_link_libraries(drivers_board
-		PRIVATE
-			nuttx_arch
-			nuttx_drivers
-			canbootloader
-	)
-	target_include_directories(drivers_board PRIVATE ${PX4_SOURCE_DIR}/platforms/nuttx/src/canbootloader)
-
-else()
-	add_library(drivers_board
-		i2c.cpp
-		init.c
-		spi.cpp
-	)
-
-	target_link_libraries(drivers_board
-		PRIVATE
-			nuttx_arch
-			nuttx_drivers
-			px4_layer
-			arch_spi
-	)
-endif()

boards/mro/cannode/src/boot.c

@@ -1,197 +0,0 @@
-/****************************************************************************
- *
- *   Copyright (c) 2021 PX4 Development Team. All rights reserved.
- *       Author: Ben Dyer <ben_dyer@mac.com>
- *               Pavel Kirienko <pavel.kirienko@zubax.com>
- *               David Sidrane <david_s5@nscdg.com>
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- * 3. Neither the name PX4 nor the names of its contributors may be
- *    used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ****************************************************************************/
-
-/****************************************************************************
- * Included Files
- ****************************************************************************/
-
-#include <px4_config.h>
-#include <stdint.h>
-#include "boot_config.h"
-#include "board.h"
-
-#include <debug.h>
-#include <string.h>
-#include <arch/board/board.h>
-
-#include <nuttx/board.h>
-
-/************************************************************************************
- * Name: stm32_boardinitialize
- *
- * Description:
- *   All STM32 architectures must provide the following entry point.  This entry point
- *   is called early in the initialization -- after all memory has been configured
- *   and mapped but before any devices have been initialized.
- *
- ************************************************************************************/
-
-__EXPORT void stm32_boardinitialize(void)
-{
-	putreg32(getreg32(STM32_RCC_APB1ENR) | RCC_APB1ENR_CAN1EN, STM32_RCC_APB1ENR);
-	stm32_configgpio(GPIO_CAN1_RX);
-	stm32_configgpio(GPIO_CAN1_TX);
-	putreg32(getreg32(STM32_RCC_APB1RSTR) | RCC_APB1RSTR_CAN1RST, STM32_RCC_APB1RSTR);
-	putreg32(getreg32(STM32_RCC_APB1RSTR) & ~RCC_APB1RSTR_CAN1RST, STM32_RCC_APB1RSTR);
-
-#if defined(OPT_WAIT_FOR_GETNODEINFO_JUMPER_GPIO)
-	stm32_configgpio(GPIO_GETNODEINFO_JUMPER);
-#endif
-
-}
-
-/************************************************************************************
- * Name: board_deinitialize
- *
- * Description:
- *   This function is called by the bootloader code prior to booting
- *   the application. Is should place the HW into an benign initialized state.
- *
- ************************************************************************************/
-
-void board_deinitialize(void)
-{
-	putreg32(getreg32(STM32_RCC_APB1RSTR) | RCC_APB1RSTR_CAN1RST, STM32_RCC_APB1RSTR);
-}
-
-/****************************************************************************
- * Name: board_get_product_name
- *
- * Description:
- *   Called to retrieve the product name. The returned value is a assumed
- *   to be written to a pascal style string that will be length prefixed
- *   and not null terminated
- *
- * Input Parameters:
- *    product_name - A pointer to a buffer to write the name.
- *    maxlen       - The maximum number of charter that can be written
- *
- * Returned Value:
- *   The length of characters written to the buffer.
- *
- ****************************************************************************/
-
-uint8_t board_get_product_name(uint8_t *product_name, size_t maxlen)
-{
-	DEBUGASSERT(maxlen > UAVCAN_STRLEN(HW_UAVCAN_NAME));
-	memcpy(product_name, HW_UAVCAN_NAME, UAVCAN_STRLEN(HW_UAVCAN_NAME));
-	return UAVCAN_STRLEN(HW_UAVCAN_NAME);
-}
-
-/****************************************************************************
- * Name: board_get_hardware_version
- *
- * Description:
- *   Called to retrieve the hardware version information. The function
- *   will first initialize the the callers struct to all zeros.
- *
- * Input Parameters:
- *    hw_version - A pointer to a uavcan_hardwareversion_t.
- *
- * Returned Value:
- *   Length of the unique_id
- *
- ****************************************************************************/
-
-size_t board_get_hardware_version(uavcan_HardwareVersion_t *hw_version)
-{
-	memset(hw_version, 0, sizeof(uavcan_HardwareVersion_t));
-
-	hw_version->major = HW_VERSION_MAJOR;
-	hw_version->minor = HW_VERSION_MINOR;
-
-	return board_get_mfguid(*(mfguid_t *) hw_version->unique_id);
-}
-
-/****************************************************************************
- * Name: board_indicate
- *
- * Description:
- *   Provides User feedback to indicate the state of the bootloader
- *   on board specific  hardware.
- *
- * Input Parameters:
- *    indication - A member of the uiindication_t
- *
- * Returned Value:
- *   None
- *
- ****************************************************************************/
-// #define led(n, code, r , g , b, h) {.red = (r),.green = (g), .blue = (b),.hz = (h)}
-
-// typedef begin_packed_struct struct led_t {
-// 	uint8_t red;
-// 	uint8_t green;
-// 	uint8_t blue;
-// 	uint8_t hz;
-// } end_packed_struct led_t;
-
-// static const  led_t i2l[] = {
-
-// 	led(0, off,                             0,     0,     0,     0),
-// 	led(1, reset,                          128,   128,   128,   30),
-// 	led(2, autobaud_start,                  0,   128,     0,     1),
-// 	led(3, autobaud_end,                    0,   128,     0,     2),
-// 	led(4, allocation_start,                0,     0,    64,     2),
-// 	led(5, allocation_end,                  0,   128,    64,     3),
-// 	led(6, fw_update_start,                32,   128,    64,     3),
-// 	led(7, fw_update_erase_fail,           32,   128,    32,     3),
-// 	led(8, fw_update_invalid_response,     64,     0,     0,     1),
-// 	led(9, fw_update_timeout,              64,     0,     0,     2),
-// 	led(a, fw_update_invalid_crc,          64,     0,     0,     4),
-// 	led(b, jump_to_app,                     0,   128,     0,    10),
-
-// };
-
-void board_indicate(uiindication_t indication)
-{
-	// switch(indication) {
-	// 	case off:
-	// 		led_off(GPIO_nLED_RED);
-	// 		led_off(GPIO_nLED_BLUE);
-	// 		break;
-	// 	case reset:
-	// 		led_on(GPIO_nLED_RED);
-	// 		led_on(GPIO_nLED_BLUE);
-	// 		break;
-	// 	case jump_to_app:
-	// 		led_on(GPIO_nLED_RED);
-	// 		led_off(GPIO_nLED_BLUE);
-	// 		break;
-	// 	default:
-	// 		break;
-	// }
-}

boards/mro/cannode/src/boot_config.h

@@ -1,130 +0,0 @@
-/****************************************************************************
- *
- *   Copyright (c) 2021 PX4 Development Team. All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- * 3. Neither the name PX4 nor the names of its contributors may be
- *    used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ****************************************************************************/
-
-/*
- * @file boot_config.h
- *
- * bootloader definitions that configures the behavior and options
- * of the Boot loader
- * This file is relies on the parent folder's boot_config.h file and defines
- * different usages of the hardware for bootloading
- */
-
-#pragma once
-
-/************************************************************************************
- * Included Files
- ************************************************************************************/
-
-/* Bring in the board_config.h definitions
- * todo:make this be pulled in from a targed's build
- * files in nuttx*/
-
-#include "board_config.h"
-#include "uavcan.h"
-#include <nuttx/compiler.h>
-
-#include <stdint.h>
-
-#include <stm32_flash.h>
-
-/****************************************************************************
- * Pre-processor Definitions
- ****************************************************************************/
-
-#define OPT_PREFERRED_NODE_ID ANY_NODE_ID
-
-//todo:wrap OPT_x in in ifdefs for command line definitions
-#define OPT_TBOOT_MS                    5000
-#define OPT_NODE_STATUS_RATE_MS         800
-#define OPT_NODE_INFO_RATE_MS           50
-#define OPT_BL_NUMBER_TIMERS            7
-
-/*
- *  This Option set is set to 1 ensure a provider of firmware has an
- *  opportunity update the node's firmware.
- *  This Option is the default policy and can be overridden by
- *  a jumper
- *  When this Policy is set, the node will ignore tboot and
- *  wait indefinitely for a GetNodeInfo request before booting.
- *
- *  OPT_WAIT_FOR_GETNODEINFO_JUMPER_GPIO_INVERT is used to allow
- *  the polarity of the jumper to be True Active
- *
- *  wait  OPT_WAIT_FOR_GETNODEINFO  OPT_WAIT_FOR_GETNODEINFO_JUMPER_GPIO
- *                                                 Jumper
- *   yes           1                       0         x
- *   yes           1                       1       Active
- *   no            1                       1       Not Active
- *   no            0                       0         X
- *   yes           0                       1       Active
- *   no            0                       1       Not Active
- *
- */
-#define OPT_WAIT_FOR_GETNODEINFO                    0
-#define OPT_WAIT_FOR_GETNODEINFO_JUMPER_GPIO        1
-#define OPT_WAIT_FOR_GETNODEINFO_JUMPER_GPIO_INVERT 0
-
-#define OPT_ENABLE_WD           1
-
-#define OPT_RESTART_TIMEOUT_MS          20000
-
-/* Reserved for the Booloader */
-#define OPT_BOOTLOADER_SIZE_IN_K        (1024*64)
-
-/* Reserved for the application out of the total
- * system flash minus the BOOTLOADER_SIZE_IN_K
- */
-#define OPT_APPLICATION_RESERVER_IN_K    0
-
-#define OPT_APPLICATION_IMAGE_OFFSET    OPT_BOOTLOADER_SIZE_IN_K
-#define OPT_APPLICATION_IMAGE_LENGTH    (FLASH_SIZE-(OPT_BOOTLOADER_SIZE_IN_K+OPT_APPLICATION_RESERVER_IN_K))
-
-
-#define FLASH_BASE              STM32_FLASH_BASE
-#define FLASH_SIZE              STM32_FLASH_SIZE
-
-#define APPLICATION_LOAD_ADDRESS (FLASH_BASE + OPT_APPLICATION_IMAGE_OFFSET)
-#define APPLICATION_SIZE (FLASH_SIZE-OPT_APPLICATION_IMAGE_OFFSET)
-#define APPLICATION_LAST_8BIT_ADDRRESS  ((uint8_t *)((APPLICATION_LOAD_ADDRESS+APPLICATION_SIZE)-sizeof(uint8_t)))
-#define APPLICATION_LAST_32BIT_ADDRRESS ((uint32_t *)((APPLICATION_LOAD_ADDRESS+APPLICATION_SIZE)-sizeof(uint32_t)))
-#define APPLICATION_LAST_64BIT_ADDRRESS ((uint64_t *)((APPLICATION_LOAD_ADDRESS+APPLICATION_SIZE)-sizeof(uint64_t)))
-
-/* If this board uses big flash that have large sectors */
-
-#define OPT_USE_YIELD
-
-/* Bootloader Option*****************************************************************
- *
- */
-#define GPIO_GETNODEINFO_JUMPER (GPIO_BOOT_CONFIG & ~GPIO_EXTI)

boards/mro/cannode/src/i2c.cpp

@@ -1,38 +0,0 @@
-/****************************************************************************
- *
- *   Copyright (C) 2021 PX4 Development Team. All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- * 3. Neither the name PX4 nor the names of its contributors may be
- *    used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ****************************************************************************/
-
-#include <px4_arch/i2c_hw_description.h>
-
-constexpr px4_i2c_bus_t px4_i2c_buses[I2C_BUS_MAX_BUS_ITEMS] = {
-	initI2CBusExternal(1),
-};

boards/mro/cannode/src/init.c

@@ -1,141 +0,0 @@
-/****************************************************************************
- *
- *   Copyright (c) 2021 PX4 Development Team. All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- * 3. Neither the name PX4 nor the names of its contributors may be
- *    used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ****************************************************************************/
-
-/**
- * @file init.c
- *
- * board specific early startup code.  This file implements the
- * board_app_initialize() function that is called early by nsh during startup.
- *
- * Code here is run before the rcS script is invoked; it should start required
- * subsystems and perform board-specific initialization.
- */
-
-#include <px4_platform_common/px4_config.h>
-#include <px4_platform_common/tasks.h>
-
-#include <stdbool.h>
-#include <stdio.h>
-#include <string.h>
-#include <debug.h>
-#include <errno.h>
-
-#include <nuttx/board.h>
-
-#include <stm32.h>
-#include "board_config.h"
-#include <stm32_uart.h>
-
-#include <arch/board/board.h>
-
-#include <drivers/drv_hrt.h>
-#include <drivers/drv_board_led.h>
-
-#include <systemlib/px4_macros.h>
-
-#include <px4_platform_common/init.h>
-
-# if defined(FLASH_BASED_PARAMS)
-#  include <parameters/flashparams/flashfs.h>
-#endif
-
-/************************************************************************************
- * Name: stm32_boardinitialize
- *
- * Description:
- *   All STM32 architectures must provide the following entry point.  This entry point
- *   is called early in the initialization -- after all memory has been configured
- *   and mapped but before any devices have been initialized.
- *
- ************************************************************************************/
-
-__EXPORT void stm32_boardinitialize(void)
-{
-	// Configure CAN interface
-	stm32_configgpio(GPIO_CAN1_RX);
-	stm32_configgpio(GPIO_CAN1_TX);
-
-	// Configure SPI all interfaces GPIO & enable power.
-	stm32_spiinitialize();
-}
-
-/****************************************************************************
- * Name: board_app_initialize
- *
- * Description:
- *   Perform application specific initialization.  This function is never
- *   called directly from application code, but only indirectly via the
- *   (non-standard) boardctl() interface using the command BOARDIOC_INIT.
- *
- * Input Parameters:
- *   arg - The boardctl() argument is passed to the board_app_initialize()
- *         implementation without modification.  The argument has no
- *         meaning to NuttX; the meaning of the argument is a contract
- *         between the board-specific initalization logic and the the
- *         matching application logic.  The value cold be such things as a
- *         mode enumeration value, a set of DIP switch switch settings, a
- *         pointer to configuration data read from a file or serial FLASH,
- *         or whatever you would like to do with it.  Every implementation
- *         should accept zero/NULL as a default configuration.
- *
- * Returned Value:
- *   Zero (OK) is returned on success; a negated errno value is returned on
- *   any failure to indicate the nature of the failure.
- *
- ****************************************************************************/
-
-__EXPORT int board_app_initialize(uintptr_t arg)
-{
-	px4_platform_init();
-
-#if defined(FLASH_BASED_PARAMS)
-	static sector_descriptor_t params_sector_map[] = {
-		{2, 16 * 1024, 0x08008000},
-		{3, 16 * 1024, 0x0800C000},
-		{0, 0, 0},
-	};
-
-	/* Initialize the flashfs layer to use heap allocated memory */
-	int result = parameter_flashfs_init(params_sector_map, NULL, 0);
-
-	if (result != OK) {
-		syslog(LOG_ERR, "[boot] FAILED to init params in FLASH %d\n", result);
-		return -ENODEV;
-	}
-
-#endif // FLASH_BASED_PARAMS
-
-	//px4_platform_configure();
-
-	return OK;
-}

boards/mro/cannode/src/spi.cpp

@@ -1,44 +0,0 @@
-/****************************************************************************
- *
- *   Copyright (C) 2021 PX4 Development Team. All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- * 3. Neither the name PX4 nor the names of its contributors may be
- *    used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ****************************************************************************/
-
-#include <px4_arch/spi_hw_description.h>
-#include <drivers/drv_sensor.h>
-#include <nuttx/spi/spi.h>
-
-constexpr px4_spi_bus_t px4_spi_buses[SPI_BUS_MAX_BUS_ITEMS] = {
-	initSPIBus(SPI::Bus::SPI1, {
-		initSPIDevice(DRV_DEVTYPE_UNUSED, SPI::CS{GPIO::PortB, GPIO::Pin0}),
-	}),
-};
-
-static constexpr bool unused = validateSPIConfig(px4_spi_buses);

boards/mro/cannode/uavcan_board_identity

@@ -1,17 +0,0 @@
-# UAVCAN boot loadable Module ID
-set(uavcanblid_sw_version_major 0)
-set(uavcanblid_sw_version_minor 1)
-add_definitions(
-	-DAPP_VERSION_MAJOR=${uavcanblid_sw_version_major}
-	-DAPP_VERSION_MINOR=${uavcanblid_sw_version_minor}
-)
-
-set(uavcanblid_hw_version_major 0x3)
-set(uavcanblid_hw_version_minor 0xEC)
-set(uavcanblid_name "\"org.ardupilot.mro_m10025\"")
-
-add_definitions(
-	-DHW_UAVCAN_NAME=${uavcanblid_name}
-	-DHW_VERSION_MAJOR=${uavcanblid_hw_version_major}
-	-DHW_VERSION_MINOR=${uavcanblid_hw_version_minor}
-)

boards/mro/ctrl-zero-f7-oem/default.cmake

@@ -7,7 +7,6 @@ px4_add_board(
 	TOOLCHAIN arm-none-eabi
 	ARCHITECTURE cortex-m7
 	ROMFSROOT px4fmu_common
-	TESTING
 	UAVCAN_INTERFACES 2
 	SERIAL_PORTS
 		TEL1:/dev/ttyS0
@@ -50,7 +49,6 @@ px4_add_board(
 		rpm
 		safety_button
 		telemetry # all available telemetry drivers
-		test_ppm
 		tone_alarm
 		uavcan
 	MODULES
@@ -112,7 +110,6 @@ px4_add_board(
 		sd_bench
 		serial_test
 		system_time
-		tests # tests and test runner
 		top
 		topic_listener
 		tune_control
@@ -122,15 +119,15 @@ px4_add_board(
 		work_queue
 	EXAMPLES
 		fake_gps
-		fake_gyro
-		fake_magnetometer
-		fixedwing_control # Tutorial code from https://px4.io/dev/example_fixedwing_control
-		hello
-		hwtest # Hardware test
+		#fake_gyro
+		#fake_magnetometer
+		#fixedwing_control # Tutorial code from https://px4.io/dev/example_fixedwing_control
+		#hello
+		#hwtest # Hardware test
 		#matlab_csv_serial
-		px4_mavlink_debug # Tutorial code from http://dev.px4.io/en/debug/debug_values.html
-		px4_simple_app # Tutorial code from http://dev.px4.io/en/apps/hello_sky.html
-		rover_steering_control # Rover example app
-		uuv_example_app
-		work_item
+		#px4_mavlink_debug # Tutorial code from http://dev.px4.io/en/debug/debug_values.html
+		#px4_simple_app # Tutorial code from http://dev.px4.io/en/apps/hello_sky.html
+		#rover_steering_control # Rover example app
+		#uuv_example_app
+		#work_item
 	)

boards/mro/ctrl-zero-f7/default.cmake

@@ -7,7 +7,6 @@ px4_add_board(
 	TOOLCHAIN arm-none-eabi
 	ARCHITECTURE cortex-m7
 	ROMFSROOT px4fmu_common
-	TESTING
 	UAVCAN_INTERFACES 1
 	SERIAL_PORTS
 		TEL1:/dev/ttyS0
@@ -50,7 +49,6 @@ px4_add_board(
 		rpm
 		safety_button
 		telemetry # all available telemetry drivers
-		test_ppm
 		tone_alarm
 		uavcan
 	MODULES
@@ -112,7 +110,6 @@ px4_add_board(
 		sd_bench
 		serial_test
 		system_time
-		tests # tests and test runner
 		top
 		topic_listener
 		tune_control
@@ -122,15 +119,15 @@ px4_add_board(
 		work_queue
 	EXAMPLES
 		fake_gps
-		fake_gyro
-		fake_magnetometer
-		fixedwing_control # Tutorial code from https://px4.io/dev/example_fixedwing_control
-		hello
-		hwtest # Hardware test
+		#fake_gyro
+		#fake_magnetometer
+		#fixedwing_control # Tutorial code from https://px4.io/dev/example_fixedwing_control
+		#hello
+		#hwtest # Hardware test
 		#matlab_csv_serial
-		px4_mavlink_debug # Tutorial code from http://dev.px4.io/en/debug/debug_values.html
-		px4_simple_app # Tutorial code from http://dev.px4.io/en/apps/hello_sky.html
-		rover_steering_control # Rover example app
-		uuv_example_app
-		work_item
+		#px4_mavlink_debug # Tutorial code from http://dev.px4.io/en/debug/debug_values.html
+		#px4_simple_app # Tutorial code from http://dev.px4.io/en/apps/hello_sky.html
+		#rover_steering_control # Rover example app
+		#uuv_example_app
+		#work_item
 	)

boards/mro/ctrl-zero-h7-oem/default.cmake

@@ -108,7 +108,6 @@ px4_add_board(
 		sd_bench
 		serial_test
 		system_time
-		#tests # tests and test runner
 		top
 		topic_listener
 		tune_control

boards/mro/ctrl-zero-h7/default.cmake

@@ -108,7 +108,6 @@ px4_add_board(
 		sd_bench
 		serial_test
 		system_time
-		#tests # tests and test runner
 		top
 		topic_listener
 		tune_control

boards/mro/pixracerpro/default.cmake

@@ -109,7 +109,6 @@ px4_add_board(
 		sd_bench
 		serial_test
 		system_time
-		#tests # tests and test runner
 		top
 		topic_listener
 		tune_control

boards/mro/x21-777/default.cmake

@@ -8,7 +8,6 @@ px4_add_board(
 	ARCHITECTURE cortex-m7
 	ROMFSROOT px4fmu_common
 	IO px4_io-v2_default
-	TESTING
 	UAVCAN_INTERFACES 1
 	SERIAL_PORTS
 		# IO DEBUG:/dev/ttyS0
@@ -50,7 +49,6 @@ px4_add_board(
 		roboclaw
 		rpm
 		telemetry # all available telemetry drivers
-		test_ppm
 		tone_alarm
 		uavcan
 	MODULES
@@ -112,7 +110,6 @@ px4_add_board(
 		sd_bench
 		serial_test
 		system_time
-		tests # tests and test runner
 		top
 		topic_listener
 		tune_control

boards/mro/x21/default.cmake

@@ -9,7 +9,6 @@ px4_add_board(
 	CONSTRAINED_MEMORY
 	ROMFSROOT px4fmu_common
 	IO px4_io-v2_default
-	TESTING
 	UAVCAN_INTERFACES 1
 	SERIAL_PORTS
 		# IO DEBUG:/dev/ttyS0
@@ -51,7 +50,6 @@ px4_add_board(
 		roboclaw
 		rpm
 		telemetry # all available telemetry drivers
-		test_ppm
 		tone_alarm
 		uavcan
 	MODULES
@@ -113,7 +111,6 @@ px4_add_board(
 		sd_bench
 		serial_test
 		system_time
-		tests # tests and test runner
 		top
 		topic_listener
 		tune_control

boards/nxp/fmuk66-e/default.cmake

@@ -8,7 +8,6 @@ px4_add_board(
 	ARCHITECTURE cortex-m4
 	CONSTRAINED_MEMORY
 	ROMFSROOT px4fmu_common
-	TESTING
 	UAVCAN_INTERFACES 2
 	SERIAL_PORTS
 		GPS1:/dev/ttyS3
@@ -47,7 +46,6 @@ px4_add_board(
 		rpm
 		safety_button
 		telemetry # all available telemetry drivers
-		#test_ppm # NOT Portable YET
 		tone_alarm
 		uavcan
 	MODULES
@@ -108,7 +106,6 @@ px4_add_board(
 		sd_bench
 		serial_test
 		system_time
-		tests # tests and test runner
 		top
 		topic_listener
 		tune_control
@@ -118,15 +115,15 @@ px4_add_board(
 		work_queue
 	EXAMPLES
 		fake_gps
-		fake_gyro
-		fake_magnetometer
-		fixedwing_control # Tutorial code from https://px4.io/dev/example_fixedwing_control
-		hello
-		hwtest # Hardware test
+		#fake_gyro
+		#fake_magnetometer
+		#fixedwing_control # Tutorial code from https://px4.io/dev/example_fixedwing_control
+		#hello
+		#hwtest # Hardware test
 		#matlab_csv_serial
-		px4_mavlink_debug # Tutorial code from http://dev.px4.io/en/debug/debug_values.html
-		px4_simple_app # Tutorial code from http://dev.px4.io/en/apps/hello_sky.html
-		rover_steering_control # Rover example app
-		uuv_example_app
-		work_item
+		#px4_mavlink_debug # Tutorial code from http://dev.px4.io/en/debug/debug_values.html
+		#px4_simple_app # Tutorial code from http://dev.px4.io/en/apps/hello_sky.html
+		#rover_steering_control # Rover example app
+		#uuv_example_app
+		#work_item
 	)

boards/nxp/fmuk66-e/rtps.cmake

@@ -8,7 +8,6 @@ px4_add_board(
 	ARCHITECTURE cortex-m4
 	CONSTRAINED_MEMORY
 	ROMFSROOT px4fmu_common
-	TESTING
 	UAVCAN_INTERFACES 2
 	SERIAL_PORTS
 		GPS1:/dev/ttyS3
@@ -47,7 +46,6 @@ px4_add_board(
 		rpm
 		safety_button
 		telemetry # all available telemetry drivers
-		#test_ppm # NOT Portable YET
 		tone_alarm
 		uavcan
 	MODULES
@@ -118,15 +116,15 @@ px4_add_board(
 		work_queue
 	EXAMPLES
 		fake_gps
-		fake_gyro
-		fake_magnetometer
-		fixedwing_control # Tutorial code from https://px4.io/dev/example_fixedwing_control
-		hello
-		hwtest # Hardware test
+		#fake_gyro
+		#fake_magnetometer
+		#fixedwing_control # Tutorial code from https://px4.io/dev/example_fixedwing_control
+		#hello
+		#hwtest # Hardware test
 		#matlab_csv_serial
-		px4_mavlink_debug # Tutorial code from http://dev.px4.io/en/debug/debug_values.html
-		px4_simple_app # Tutorial code from http://dev.px4.io/en/apps/hello_sky.html
-		rover_steering_control # Rover example app
-		uuv_example_app
-		work_item
+		#px4_mavlink_debug # Tutorial code from http://dev.px4.io/en/debug/debug_values.html
+		#px4_simple_app # Tutorial code from http://dev.px4.io/en/apps/hello_sky.html
+		#rover_steering_control # Rover example app
+		#uuv_example_app
+		#work_item
 	)

boards/nxp/fmuk66-e/socketcan.cmake

@@ -8,7 +8,6 @@ px4_add_board(
 	ARCHITECTURE cortex-m4
 	CONSTRAINED_MEMORY
 	ROMFSROOT px4fmu_common
-	TESTING
 	UAVCAN_INTERFACES 2
 	SERIAL_PORTS
 		GPS1:/dev/ttyS3
@@ -47,7 +46,6 @@ px4_add_board(
 		rpm
 		safety_button
 		telemetry # all available telemetry drivers
-		#test_ppm # NOT Portable YET
 		tone_alarm
 		#uavcannode_v1
 	MODULES
@@ -118,15 +116,15 @@ px4_add_board(
 		work_queue
 	EXAMPLES
 		fake_gps
-		fake_gyro
-		fake_magnetometer
-		fixedwing_control # Tutorial code from https://px4.io/dev/example_fixedwing_control
-		hello
-		hwtest # Hardware test
+		#fake_gyro
+		#fake_magnetometer
+		#fixedwing_control # Tutorial code from https://px4.io/dev/example_fixedwing_control
+		#hello
+		#hwtest # Hardware test
 		#matlab_csv_serial
-		px4_mavlink_debug # Tutorial code from http://dev.px4.io/en/debug/debug_values.html
-		px4_simple_app # Tutorial code from http://dev.px4.io/en/apps/hello_sky.html
-		rover_steering_control # Rover example app
-		uuv_example_app
-		work_item
+		#px4_mavlink_debug # Tutorial code from http://dev.px4.io/en/debug/debug_values.html
+		#px4_simple_app # Tutorial code from http://dev.px4.io/en/apps/hello_sky.html
+		#rover_steering_control # Rover example app
+		#uuv_example_app
+		#work_item
 	)

boards/nxp/fmuk66-v3/default.cmake

@@ -8,7 +8,6 @@ px4_add_board(
 	ARCHITECTURE cortex-m4
 	CONSTRAINED_MEMORY
 	ROMFSROOT px4fmu_common
-	TESTING
 	UAVCAN_INTERFACES 2
 	SERIAL_PORTS
 		GPS1:/dev/ttyS3
@@ -107,7 +106,6 @@ px4_add_board(
 		sd_bench
 		serial_test
 		system_time
-		tests # tests and test runner
 		top
 		topic_listener
 		tune_control
@@ -117,15 +115,15 @@ px4_add_board(
 		work_queue
 	EXAMPLES
 		fake_gps
-		fake_gyro
-		fake_magnetometer
-		fixedwing_control # Tutorial code from https://px4.io/dev/example_fixedwing_control
-		hello
-		hwtest # Hardware test
+		#fake_gyro
+		#fake_magnetometer
+		#fixedwing_control # Tutorial code from https://px4.io/dev/example_fixedwing_control
+		#hello
+		#hwtest # Hardware test
 		#matlab_csv_serial
-		px4_mavlink_debug # Tutorial code from http://dev.px4.io/en/debug/debug_values.html
-		px4_simple_app # Tutorial code from http://dev.px4.io/en/apps/hello_sky.html
-		rover_steering_control # Rover example app
-		uuv_example_app
-		work_item
+		#px4_mavlink_debug # Tutorial code from http://dev.px4.io/en/debug/debug_values.html
+		#px4_simple_app # Tutorial code from http://dev.px4.io/en/apps/hello_sky.html
+		#rover_steering_control # Rover example app
+		#uuv_example_app
+		#work_item
 	)

boards/nxp/fmuk66-v3/rtps.cmake

@@ -8,7 +8,6 @@ px4_add_board(
 	ARCHITECTURE cortex-m4
 	CONSTRAINED_MEMORY
 	ROMFSROOT px4fmu_common
-	TESTING
 	UAVCAN_INTERFACES 2
 	SERIAL_PORTS
 		GPS1:/dev/ttyS3
@@ -117,15 +116,15 @@ px4_add_board(
 		work_queue
 	EXAMPLES
 		fake_gps
-		fake_gyro
-		fake_magnetometer
-		fixedwing_control # Tutorial code from https://px4.io/dev/example_fixedwing_control
-		hello
-		hwtest # Hardware test
+		#fake_gyro
+		#fake_magnetometer
+		#fixedwing_control # Tutorial code from https://px4.io/dev/example_fixedwing_control
+		#hello
+		#hwtest # Hardware test
 		#matlab_csv_serial
-		px4_mavlink_debug # Tutorial code from http://dev.px4.io/en/debug/debug_values.html
-		px4_simple_app # Tutorial code from http://dev.px4.io/en/apps/hello_sky.html
-		rover_steering_control # Rover example app
-		uuv_example_app
-		work_item
+		#px4_mavlink_debug # Tutorial code from http://dev.px4.io/en/debug/debug_values.html
+		#px4_simple_app # Tutorial code from http://dev.px4.io/en/apps/hello_sky.html
+		#rover_steering_control # Rover example app
+		#uuv_example_app
+		#work_item
 	)

boards/nxp/fmuk66-v3/socketcan.cmake

@@ -8,7 +8,6 @@ px4_add_board(
 	ARCHITECTURE cortex-m4
 	CONSTRAINED_MEMORY
 	ROMFSROOT px4fmu_common
-	TESTING
 	UAVCAN_INTERFACES 2
 	SERIAL_PORTS
 		GPS1:/dev/ttyS3
@@ -117,15 +116,15 @@ px4_add_board(
 		work_queue
 	EXAMPLES
 		fake_gps
-		fake_gyro
-		fake_magnetometer
-		fixedwing_control # Tutorial code from https://px4.io/dev/example_fixedwing_control
-		hello
-		hwtest # Hardware test
+		#fake_gyro
+		#fake_magnetometer
+		#fixedwing_control # Tutorial code from https://px4.io/dev/example_fixedwing_control
+		#hello
+		#hwtest # Hardware test
 		#matlab_csv_serial
-		px4_mavlink_debug # Tutorial code from http://dev.px4.io/en/debug/debug_values.html
-		px4_simple_app # Tutorial code from http://dev.px4.io/en/apps/hello_sky.html
-		rover_steering_control # Rover example app
-		uuv_example_app
-		work_item
+		#px4_mavlink_debug # Tutorial code from http://dev.px4.io/en/debug/debug_values.html
+		#px4_simple_app # Tutorial code from http://dev.px4.io/en/apps/hello_sky.html
+		#rover_steering_control # Rover example app
+		#uuv_example_app
+		#work_item
 	)

boards/nxp/fmuk66-v3/test.cmake

@@ -0,0 +1,131 @@
+
+px4_add_board(
+	PLATFORM nuttx
+	VENDOR nxp
+	MODEL fmuk66-v3
+	LABEL test
+	TOOLCHAIN arm-none-eabi
+	ARCHITECTURE cortex-m4
+	CONSTRAINED_MEMORY
+	ROMFSROOT px4fmu_common
+	TESTING
+	UAVCAN_INTERFACES 2
+	SERIAL_PORTS
+		GPS1:/dev/ttyS3
+		TEL1:/dev/ttyS4
+		TEL2:/dev/ttyS1
+	DRIVERS
+		adc/ads1115
+		adc/board_adc
+		barometer # all available barometer drivers
+		barometer/mpl3115a2
+		batt_smbus
+		camera_capture
+		camera_trigger
+		differential_pressure # all available differential pressure drivers
+		distance_sensor # all available distance sensor drivers
+		distance_sensor/srf05 # Specific driver
+		gps
+		#imu # all available imu drivers
+		imu/fxas21002c
+		imu/fxos8701cq
+		imu/invensense/icm20948 # required for ak09916 mag
+		irlock
+		lights # all available light drivers
+		lights/rgbled_pwm
+		magnetometer # all available magnetometer drivers
+		optical_flow # all available optical flow drivers
+		osd
+		pca9685
+		pca9685_pwm_out
+		power_monitor/ina226
+		#protocol_splitter
+		pwm_out_sim
+		pwm_out
+		rc_input
+		roboclaw
+		rpm
+		safety_button
+		telemetry # all available telemetry drivers
+		tone_alarm
+		uavcan
+	MODULES
+		airspeed_selector
+		attitude_estimator_q
+		battery_status
+		camera_feedback
+		commander
+		dataman
+		ekf2
+		esc_battery
+		events
+		flight_mode_manager
+		fw_att_control
+		fw_pos_control_l1
+		gyro_calibration
+		gyro_fft
+		land_detector
+		landing_target_estimator
+		load_mon
+		local_position_estimator
+		logger
+		mavlink
+		mc_att_control
+		mc_hover_thrust_estimator
+		mc_pos_control
+		mc_rate_control
+		#micrortps_bridge
+		navigator
+		rc_update
+		rover_pos_control
+		sensors
+		sih
+		temperature_compensation
+		#uuv_att_control
+		#uuv_pos_control
+		vmount
+		vtol_att_control
+	SYSTEMCMDS
+		#bl_update
+		#dmesg
+		dumpfile
+		esc_calib
+		#gpio
+		i2cdetect
+		led_control
+		mft
+		mixer
+		motor_ramp
+		motor_test
+		mtd
+		nshterm
+		param
+		perf
+		pwm
+		reboot
+		reflect
+		sd_bench
+		serial_test
+		system_time
+		tests # tests and test runner
+		top
+		topic_listener
+		tune_control
+		uorb
+		usb_connected
+		ver
+		work_queue
+	EXAMPLES
+		fake_gps
+		fake_gyro
+		fake_magnetometer
+		fixedwing_control # Tutorial code from https://px4.io/dev/example_fixedwing_control
+		hello
+		hwtest # Hardware test
+		#matlab_csv_serial
+		px4_mavlink_debug # Tutorial code from http://dev.px4.io/en/debug/debug_values.html
+		px4_simple_app # Tutorial code from http://dev.px4.io/en/apps/hello_sky.html
+		rover_steering_control # Rover example app
+		uuv_example_app
+		work_item
+	)

boards/omnibus/f4sd/default.cmake

@@ -37,7 +37,6 @@ px4_add_board(
 		rc_input
 		#telemetry # all available telemetry drivers
 		telemetry/frsky_telemetry
-		#test_ppm
 	MODULES
 		#airspeed_selector
 		attitude_estimator_q
@@ -97,7 +96,6 @@ px4_add_board(
 		sd_bench
 		#serial_test
 		#system_time
-		#tests # tests and test runner
 		top
 		#topic_listener
 		tune_control
@@ -105,17 +103,4 @@ px4_add_board(
 		usb_connected
 		ver
 		work_queue
-	EXAMPLES
-		#fake_gps
-		#fake_gyro
-		#fake_magnetometer
-		#fixedwing_control # Tutorial code from https://px4.io/dev/example_fixedwing_control
-		#hello
-		#hwtest # Hardware test
-		#matlab_csv_serial
-		#px4_mavlink_debug # Tutorial code from http://dev.px4.io/en/debug/debug_values.html
-		#px4_simple_app # Tutorial code from http://dev.px4.io/en/apps/hello_sky.html
-		#rover_steering_control # Rover example app
-		#uuv_example_app
-		#work_item
 	)

boards/px4/fmu-v2/default.cmake

@@ -9,7 +9,6 @@ px4_add_board(
 	CONSTRAINED_MEMORY
 	ROMFSROOT px4fmu_common
 	IO px4_io-v2_default
-	#TESTING
 	#UAVCAN_INTERFACES 2
 	CONSTRAINED_FLASH
 	SERIAL_PORTS
@@ -58,7 +57,6 @@ px4_add_board(
 		#roboclaw
 		#rpm
 		#telemetry # all available telemetry drivers
-		#test_ppm
 		tone_alarm
 		#uavcan
 	MODULES
@@ -120,7 +118,6 @@ px4_add_board(
 		#sd_bench
 		#serial_test
 		#system_time
-		#tests # tests and test runner
 		top
 		#topic_listener
 		tune_control

boards/px4/fmu-v2/fixedwing.cmake

@@ -9,7 +9,6 @@ px4_add_board(
 	CONSTRAINED_MEMORY
 	ROMFSROOT px4fmu_common
 	IO px4_io-v2_default
-	#TESTING
 	#UAVCAN_INTERFACES 2
 	CONSTRAINED_FLASH
 	SERIAL_PORTS

boards/px4/fmu-v3/default.cmake

@@ -9,7 +9,6 @@ px4_add_board(
 	CONSTRAINED_MEMORY
 	ROMFSROOT px4fmu_common
 	IO px4_io-v2_default
-	TESTING
 	UAVCAN_INTERFACES 2
 	SERIAL_PORTS
 		GPS1:/dev/ttyS3
@@ -52,7 +51,6 @@ px4_add_board(
 		roboclaw
 		rpm
 		telemetry # all available telemetry drivers
-		test_ppm
 		tone_alarm
 		uavcan
 	MODULES
@@ -114,7 +112,6 @@ px4_add_board(
 		sd_bench
 		serial_test
 		system_time
-		tests # tests and test runner
 		top
 		topic_listener
 		tune_control
@@ -124,15 +121,15 @@ px4_add_board(
 		work_queue
 	EXAMPLES
 		fake_gps
-		fake_gyro
-		fake_magnetometer
-		fixedwing_control # Tutorial code from https://px4.io/dev/example_fixedwing_control
-		hello
-		hwtest # Hardware test
+		#fake_gyro
+		#fake_magnetometer
+		#fixedwing_control # Tutorial code from https://px4.io/dev/example_fixedwing_control
+		#hello
+		#hwtest # Hardware test
 		#matlab_csv_serial
-		px4_mavlink_debug # Tutorial code from http://dev.px4.io/en/debug/debug_values.html
-		px4_simple_app # Tutorial code from http://dev.px4.io/en/apps/hello_sky.html
-		rover_steering_control # Rover example app
-		uuv_example_app
-		work_item
+		#px4_mavlink_debug # Tutorial code from http://dev.px4.io/en/debug/debug_values.html
+		#px4_simple_app # Tutorial code from http://dev.px4.io/en/apps/hello_sky.html
+		#rover_steering_control # Rover example app
+		#uuv_example_app
+		#work_item
 	)

boards/px4/fmu-v3/test.cmake

@@ -0,0 +1,138 @@
+
+px4_add_board(
+	PLATFORM nuttx
+	VENDOR px4
+	MODEL fmu-v3
+	LABEL test
+	TOOLCHAIN arm-none-eabi
+	ARCHITECTURE cortex-m4
+	CONSTRAINED_MEMORY
+	ROMFSROOT px4fmu_common
+	IO px4_io-v2_default
+	TESTING
+	UAVCAN_INTERFACES 2
+	SERIAL_PORTS
+		GPS1:/dev/ttyS3
+		TEL1:/dev/ttyS1
+		TEL2:/dev/ttyS2
+		TEL4:/dev/ttyS6
+	DRIVERS
+		adc/ads1115
+		adc/board_adc
+		barometer # all available barometer drivers
+		batt_smbus
+		camera_capture
+		camera_trigger
+		differential_pressure # all available differential pressure drivers
+		distance_sensor # all available distance sensor drivers
+		dshot
+		gps
+		heater
+		#imu # all available imu drivers
+		imu/analog_devices/adis16448
+		imu/l3gd20
+		imu/lsm303d
+		imu/invensense/icm20608g
+		imu/invensense/icm20948 # required for ak09916 mag
+		imu/invensense/mpu6000
+		imu/invensense/mpu9250
+		irlock
+		lights # all available light drivers
+		magnetometer # all available magnetometer drivers
+		optical_flow # all available optical flow drivers
+		osd
+		pca9685
+		pca9685_pwm_out
+		#power_monitor/ina226
+		#protocol_splitter
+		pwm_input
+		pwm_out_sim
+		pwm_out
+		px4io
+		roboclaw
+		rpm
+		telemetry # all available telemetry drivers
+		test_ppm
+		tone_alarm
+		uavcan
+	MODULES
+		airspeed_selector
+		attitude_estimator_q
+		battery_status
+		camera_feedback
+		commander
+		dataman
+		ekf2
+		esc_battery
+		events
+		flight_mode_manager
+		fw_att_control
+		fw_pos_control_l1
+		gyro_calibration
+		gyro_fft
+		land_detector
+		landing_target_estimator
+		load_mon
+		local_position_estimator
+		logger
+		mavlink
+		mc_att_control
+		mc_hover_thrust_estimator
+		mc_pos_control
+		mc_rate_control
+		#micrortps_bridge
+		navigator
+		rc_update
+		rover_pos_control
+		sensors
+		sih
+		temperature_compensation
+		uuv_att_control
+		uuv_pos_control
+		vmount
+		vtol_att_control
+	SYSTEMCMDS
+		bl_update
+		#dmesg
+		dumpfile
+		esc_calib
+		gpio
+		hardfault_log
+		i2cdetect
+		led_control
+		mft
+		mixer
+		motor_ramp
+		motor_test
+		mtd
+		nshterm
+		param
+		perf
+		pwm
+		reboot
+		reflect
+		sd_bench
+		serial_test
+		system_time
+		tests # tests and test runner
+		top
+		topic_listener
+		tune_control
+		uorb
+		usb_connected
+		ver
+		work_queue
+	EXAMPLES
+		fake_gps
+		fake_gyro
+		fake_magnetometer
+		fixedwing_control # Tutorial code from https://px4.io/dev/example_fixedwing_control
+		hello
+		hwtest # Hardware test
+		#matlab_csv_serial
+		px4_mavlink_debug # Tutorial code from http://dev.px4.io/en/debug/debug_values.html
+		px4_simple_app # Tutorial code from http://dev.px4.io/en/apps/hello_sky.html
+		rover_steering_control # Rover example app
+		uuv_example_app
+		work_item
+	)

boards/px4/fmu-v4/default.cmake

@@ -8,7 +8,6 @@ px4_add_board(
 	ARCHITECTURE cortex-m4
 	CONSTRAINED_MEMORY
 	ROMFSROOT px4fmu_common
-	TESTING
 	UAVCAN_INTERFACES 1
 	SERIAL_PORTS
 		GPS1:/dev/ttyS3
@@ -50,9 +49,9 @@ px4_add_board(
 		rpm
 		safety_button
 		telemetry # all available telemetry drivers
-		test_ppm
 		tone_alarm
 		uavcan
+		vesc
 	MODULES
 		airspeed_selector
 		attitude_estimator_q
@@ -91,7 +90,7 @@ px4_add_board(
 		vtol_att_control
 	SYSTEMCMDS
 		bl_update
-		#dmesg
+		dmesg
 		dumpfile
 		esc_calib
 		gpio
@@ -112,7 +111,6 @@ px4_add_board(
 		sd_bench
 		serial_test
 		system_time
-		tests # tests and test runner
 		top
 		topic_listener
 		tune_control
@@ -122,15 +120,15 @@ px4_add_board(
 		work_queue
 	EXAMPLES
 		fake_gps
-		fake_gyro
-		fake_magnetometer
-		fixedwing_control # Tutorial code from https://px4.io/dev/example_fixedwing_control
-		hello
-		hwtest # Hardware test
+		#fake_gyro
+		#fake_magnetometer
+		#fixedwing_control # Tutorial code from https://px4.io/dev/example_fixedwing_control
+		#hello
+		#hwtest # Hardware test
 		#matlab_csv_serial
-		px4_mavlink_debug # Tutorial code from http://dev.px4.io/en/debug/debug_values.html
-		px4_simple_app # Tutorial code from http://dev.px4.io/en/apps/hello_sky.html
-		rover_steering_control # Rover example app
-		uuv_example_app
-		work_item
+		#px4_mavlink_debug # Tutorial code from http://dev.px4.io/en/debug/debug_values.html
+		#px4_simple_app # Tutorial code from http://dev.px4.io/en/apps/hello_sky.html
+		#rover_steering_control # Rover example app
+		#uuv_example_app
+		#work_item
 	)

boards/px4/fmu-v4/src/board_config.h

@@ -98,6 +98,8 @@
 #define GPIO_TONE_ALARM_IDLE         (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTA|GPIO_PIN15)
 #define GPIO_TONE_ALARM              (GPIO_ALT|GPIO_AF1|GPIO_SPEED_2MHz|GPIO_PUSHPULL|GPIO_PORTA|GPIO_PIN15)
 
+#define BOARD_ENABLE_CONSOLE_BUFFER
+
 /**
  * PWM:
  *

boards/px4/fmu-v4/test.cmake

@@ -0,0 +1,136 @@
+
+px4_add_board(
+	PLATFORM nuttx
+	VENDOR px4
+	MODEL fmu-v4
+	LABEL test
+	TOOLCHAIN arm-none-eabi
+	ARCHITECTURE cortex-m4
+	CONSTRAINED_MEMORY
+	ROMFSROOT px4fmu_common
+	TESTING
+	UAVCAN_INTERFACES 1
+	SERIAL_PORTS
+		GPS1:/dev/ttyS3
+		TEL1:/dev/ttyS1
+		TEL2:/dev/ttyS2
+		WIFI:/dev/ttyS0
+	DRIVERS
+		adc/ads1115
+		adc/board_adc
+		barometer # all available barometer drivers
+		batt_smbus
+		camera_capture
+		camera_trigger
+		differential_pressure # all available differential pressure drivers
+		distance_sensor # all available distance sensor drivers
+		dshot
+		gps
+		heater
+		#imu # all available imu drivers
+		imu/analog_devices/adis16448
+		imu/invensense/icm20602
+		imu/invensense/icm20608g
+		imu/invensense/icm20948 # required for ak09916 mag
+		imu/invensense/mpu9250
+		irlock
+		lights # all available light drivers
+		magnetometer # all available magnetometer drivers
+		optical_flow # all available optical flow drivers
+		osd
+		pca9685
+		pca9685_pwm_out
+		power_monitor/ina226
+		#protocol_splitter
+		pwm_input
+		pwm_out_sim
+		pwm_out
+		rc_input
+		roboclaw
+		rpm
+		safety_button
+		telemetry # all available telemetry drivers
+		test_ppm
+		tone_alarm
+		uavcan
+	MODULES
+		airspeed_selector
+		attitude_estimator_q
+		battery_status
+		camera_feedback
+		commander
+		dataman
+		ekf2
+		esc_battery
+		events
+		flight_mode_manager
+		fw_att_control
+		fw_pos_control_l1
+		gyro_calibration
+		gyro_fft
+		land_detector
+		landing_target_estimator
+		load_mon
+		local_position_estimator
+		logger
+		mavlink
+		mc_att_control
+		mc_hover_thrust_estimator
+		mc_pos_control
+		mc_rate_control
+		#micrortps_bridge
+		navigator
+		rc_update
+		rover_pos_control
+		sensors
+		sih
+		temperature_compensation
+		uuv_att_control
+		uuv_pos_control
+		vmount
+		vtol_att_control
+	SYSTEMCMDS
+		bl_update
+		#dmesg
+		dumpfile
+		esc_calib
+		gpio
+		hardfault_log
+		i2cdetect
+		led_control
+		mft
+		mixer
+		motor_ramp
+		motor_test
+		mtd
+		nshterm
+		param
+		perf
+		pwm
+		reboot
+		reflect
+		sd_bench
+		serial_test
+		system_time
+		tests # tests and test runner
+		top
+		topic_listener
+		tune_control
+		uorb
+		usb_connected
+		ver
+		work_queue
+	EXAMPLES
+		fake_gps
+		fake_gyro
+		fake_magnetometer
+		fixedwing_control # Tutorial code from https://px4.io/dev/example_fixedwing_control
+		hello
+		hwtest # Hardware test
+		#matlab_csv_serial
+		px4_mavlink_debug # Tutorial code from http://dev.px4.io/en/debug/debug_values.html
+		px4_simple_app # Tutorial code from http://dev.px4.io/en/apps/hello_sky.html
+		rover_steering_control # Rover example app
+		uuv_example_app
+		work_item
+	)

boards/px4/fmu-v4pro/default.cmake

@@ -9,7 +9,6 @@ px4_add_board(
 	CONSTRAINED_MEMORY
 	ROMFSROOT px4fmu_common
 	IO px4_io-v2_default
-	TESTING
 	UAVCAN_INTERFACES 2
 	SERIAL_PORTS
 		GPS1:/dev/ttyS3
@@ -51,7 +50,6 @@ px4_add_board(
 		roboclaw
 		rpm
 		telemetry # all available telemetry drivers
-		test_ppm
 		tone_alarm
 		uavcan
 	MODULES
@@ -112,7 +110,6 @@ px4_add_board(
 		reflect
 		sd_bench
 		system_time
-		tests # tests and test runner
 		top
 		topic_listener
 		tune_control
@@ -122,15 +119,15 @@ px4_add_board(
 		work_queue
 	EXAMPLES
 		fake_gps
-		fake_gyro
-		fake_magnetometer
-		fixedwing_control # Tutorial code from https://px4.io/dev/example_fixedwing_control
-		hello
-		hwtest # Hardware test
+		#fake_gyro
+		#fake_magnetometer
+		#fixedwing_control # Tutorial code from https://px4.io/dev/example_fixedwing_control
+		#hello
+		#hwtest # Hardware test
 		#matlab_csv_serial
-		px4_mavlink_debug # Tutorial code from http://dev.px4.io/en/debug/debug_values.html
-		px4_simple_app # Tutorial code from http://dev.px4.io/en/apps/hello_sky.html
-		rover_steering_control # Rover example app
-		uuv_example_app
-		work_item
+		#px4_mavlink_debug # Tutorial code from http://dev.px4.io/en/debug/debug_values.html
+		#px4_simple_app # Tutorial code from http://dev.px4.io/en/apps/hello_sky.html
+		#rover_steering_control # Rover example app
+		#uuv_example_app
+		#work_item
 	)

boards/px4/fmu-v4pro/test.cmake

@@ -0,0 +1,136 @@
+
+px4_add_board(
+	PLATFORM nuttx
+	VENDOR px4
+	MODEL fmu-v4pro
+	LABEL test
+	TOOLCHAIN arm-none-eabi
+	ARCHITECTURE cortex-m4
+	CONSTRAINED_MEMORY
+	ROMFSROOT px4fmu_common
+	IO px4_io-v2_default
+	TESTING
+	UAVCAN_INTERFACES 2
+	SERIAL_PORTS
+		GPS1:/dev/ttyS3
+		TEL1:/dev/ttyS1
+		TEL2:/dev/ttyS2
+		TEL3:/dev/ttyS0
+		TEL4:/dev/ttyS6
+	DRIVERS
+		adc/ads1115
+		adc/board_adc
+		barometer # all available barometer drivers
+		batt_smbus
+		camera_capture
+		camera_trigger
+		differential_pressure # all available differential pressure drivers
+		distance_sensor # all available distance sensor drivers
+		dshot
+		gps
+		#heater
+		#imu # all available imu drivers
+		imu/analog_devices/adis16448
+		imu/invensense/icm20602
+		imu/invensense/icm20608g
+		imu/invensense/icm20948 # required for ak09916 mag
+		imu/invensense/mpu9250
+		irlock
+		lights # all available light drivers
+		magnetometer # all available magnetometer drivers
+		optical_flow # all available optical flow drivers
+		osd
+		pca9685
+		pca9685_pwm_out
+		#power_monitor/ina226
+		#protocol_splitter
+		pwm_input
+		pwm_out_sim
+		pwm_out
+		px4io
+		roboclaw
+		rpm
+		telemetry # all available telemetry drivers
+		test_ppm
+		tone_alarm
+		uavcan
+	MODULES
+		airspeed_selector
+		attitude_estimator_q
+		battery_status
+		camera_feedback
+		commander
+		dataman
+		ekf2
+		esc_battery
+		events
+		flight_mode_manager
+		fw_att_control
+		fw_pos_control_l1
+		gyro_calibration
+		gyro_fft
+		land_detector
+		landing_target_estimator
+		load_mon
+		local_position_estimator
+		logger
+		mavlink
+		mc_att_control
+		mc_hover_thrust_estimator
+		mc_pos_control
+		mc_rate_control
+		#micrortps_bridge
+		navigator
+		rc_update
+		rover_pos_control
+		sensors
+		sih
+		temperature_compensation
+		uuv_att_control
+		uuv_pos_control
+		vmount
+		vtol_att_control
+	SYSTEMCMDS
+		bl_update
+		#dmesg
+		dumpfile
+		esc_calib
+		gpio
+		hardfault_log
+		i2cdetect
+		led_control
+		mft
+		mixer
+		motor_ramp
+		motor_test
+		mtd
+		nshterm
+		param
+		perf
+		pwm
+		reboot
+		reflect
+		sd_bench
+		system_time
+		tests # tests and test runner
+		top
+		topic_listener
+		tune_control
+		uorb
+		usb_connected
+		ver
+		work_queue
+	EXAMPLES
+		fake_gps
+		fake_gyro
+		fake_magnetometer
+		fixedwing_control # Tutorial code from https://px4.io/dev/example_fixedwing_control
+		hello
+		hwtest # Hardware test
+		#matlab_csv_serial
+		px4_mavlink_debug # Tutorial code from http://dev.px4.io/en/debug/debug_values.html
+		px4_simple_app # Tutorial code from http://dev.px4.io/en/apps/hello_sky.html
+		rover_steering_control # Rover example app
+		uuv_example_app
+		work_item
+	)

boards/px4/fmu-v5/ctrlalloc.cmake

@@ -8,7 +8,6 @@ px4_add_board(
 	ARCHITECTURE cortex-m7
 	ROMFSROOT px4fmu_common
 	IO px4_io-v2_default
-	TESTING
 	UAVCAN_INTERFACES 2
 	SERIAL_PORTS
 		GPS1:/dev/ttyS0
@@ -52,7 +51,6 @@ px4_add_board(
 		rpm
 		safety_button
 		telemetry # all available telemetry drivers
-		test_ppm
 		tone_alarm
 		uavcan
 	MODULES
@@ -116,7 +114,6 @@ px4_add_board(
 		sd_bench
 		serial_test
 		system_time
-		tests # tests and test runner
 		top
 		topic_listener
 		tune_control
@@ -126,15 +123,15 @@ px4_add_board(
 		work_queue
 	EXAMPLES
 		fake_gps
-		fake_gyro
-		fake_magnetometer
-		fixedwing_control # Tutorial code from https://px4.io/dev/example_fixedwing_control
-		hello
-		hwtest # Hardware test
+		#fake_gyro
+		#fake_magnetometer
+		#fixedwing_control # Tutorial code from https://px4.io/dev/example_fixedwing_control
+		#hello
+		#hwtest # Hardware test
 		#matlab_csv_serial
-		px4_mavlink_debug # Tutorial code from http://dev.px4.io/en/debug/debug_values.html
-		px4_simple_app # Tutorial code from http://dev.px4.io/en/apps/hello_sky.html
-		rover_steering_control # Rover example app
-		uuv_example_app
-		work_item
+		#px4_mavlink_debug # Tutorial code from http://dev.px4.io/en/debug/debug_values.html
+		#px4_simple_app # Tutorial code from http://dev.px4.io/en/apps/hello_sky.html
+		#rover_steering_control # Rover example app
+		#uuv_example_app
+		#work_item
 	)

boards/px4/fmu-v5/debug.cmake

@@ -124,7 +124,7 @@ px4_add_board(
 		ver
 		work_queue
 	EXAMPLES
-		#fake_gps
+		fake_gps
 		#fake_gyro
 		#fake_magnetometer
 		#fixedwing_control # Tutorial code from https://px4.io/dev/example_fixedwing_control

boards/px4/fmu-v5/default.cmake

@@ -8,7 +8,6 @@ px4_add_board(
 	ARCHITECTURE cortex-m7
 	ROMFSROOT px4fmu_common
 	IO px4_io-v2_default
-	TESTING
 	UAVCAN_INTERFACES 2
 	SERIAL_PORTS
 		GPS1:/dev/ttyS0
@@ -52,7 +51,6 @@ px4_add_board(
 		rpm
 		safety_button
 		telemetry # all available telemetry drivers
-		test_ppm
 		tone_alarm
 		uavcan
 	MODULES
@@ -114,7 +112,6 @@ px4_add_board(
 		sd_bench
 		serial_test
 		system_time
-		tests # tests and test runner
 		top
 		topic_listener
 		tune_control
@@ -124,15 +121,15 @@ px4_add_board(
 		work_queue
 	EXAMPLES
 		fake_gps
-		fake_gyro
-		fake_magnetometer
-		fixedwing_control # Tutorial code from https://px4.io/dev/example_fixedwing_control
-		hello
-		hwtest # Hardware test
+		#fake_gyro
+		#fake_magnetometer
+		#fixedwing_control # Tutorial code from https://px4.io/dev/example_fixedwing_control
+		#hello
+		#hwtest # Hardware test
 		#matlab_csv_serial
-		px4_mavlink_debug # Tutorial code from http://dev.px4.io/en/debug/debug_values.html
-		px4_simple_app # Tutorial code from http://dev.px4.io/en/apps/hello_sky.html
-		rover_steering_control # Rover example app
-		uuv_example_app
-		work_item
+		#px4_mavlink_debug # Tutorial code from http://dev.px4.io/en/debug/debug_values.html
+		#px4_simple_app # Tutorial code from http://dev.px4.io/en/apps/hello_sky.html
+		#rover_steering_control # Rover example app
+		#uuv_example_app
+		#work_item
 	)

boards/px4/fmu-v5/multicopter.cmake

@@ -8,7 +8,6 @@ px4_add_board(
 	ARCHITECTURE cortex-m7
 	ROMFSROOT px4fmu_common
 	IO px4_io-v2_default
-	TESTING
 	UAVCAN_INTERFACES 2
 	SERIAL_PORTS
 		GPS1:/dev/ttyS0

boards/px4/fmu-v5/optimized.cmake

@@ -12,6 +12,7 @@ px4_add_board(
 	ARCHITECTURE cortex-m7
 	ROMFSROOT px4fmu_common
 	IO px4_io-v2_default
+	EXTERNAL_METADATA
 	TESTING
 	#UAVCAN_INTERFACES 2
 	SERIAL_PORTS
@@ -126,4 +127,17 @@ px4_add_board(
 		usb_connected
 		ver
 		work_queue
+	EXAMPLES
+		fake_gps
+		#fake_gyro
+		#fake_magnetometer
+		#fixedwing_control # Tutorial code from https://px4.io/dev/example_fixedwing_control
+		#hello
+		#hwtest # Hardware test
+		#matlab_csv_serial
+		#px4_mavlink_debug # Tutorial code from http://dev.px4.io/en/debug/debug_values.html
+		#px4_simple_app # Tutorial code from http://dev.px4.io/en/apps/hello_sky.html
+		#rover_steering_control # Rover example app
+		#uuv_example_app
+		#work_item
 	)

boards/px4/fmu-v5/rtps.cmake

@@ -8,7 +8,6 @@ px4_add_board(
 	ARCHITECTURE cortex-m7
 	ROMFSROOT px4fmu_common
 	IO px4_io-v2_default
-	TESTING
 	UAVCAN_INTERFACES 2
 	SERIAL_PORTS
 		GPS1:/dev/ttyS0
@@ -50,7 +49,6 @@ px4_add_board(
 		rpm
 		safety_button
 		telemetry # all available telemetry drivers
-		test_ppm
 		tone_alarm
 		uavcan
 	MODULES
@@ -107,7 +105,6 @@ px4_add_board(
 		reflect
 		sd_bench
 		system_time
-		tests # tests and test runner
 		top
 		topic_listener
 		tune_control
@@ -117,13 +114,15 @@ px4_add_board(
 		work_queue
 	EXAMPLES
 		fake_gps
-		fixedwing_control # Tutorial code from https://px4.io/dev/example_fixedwing_control
-		hello
-		hwtest # Hardware test
+		#fake_gyro
+		#fake_magnetometer
+		#fixedwing_control # Tutorial code from https://px4.io/dev/example_fixedwing_control
+		#hello
+		#hwtest # Hardware test
 		#matlab_csv_serial
-		px4_mavlink_debug # Tutorial code from http://dev.px4.io/en/debug/debug_values.html
-		px4_simple_app # Tutorial code from http://dev.px4.io/en/apps/hello_sky.html
-		rover_steering_control # Rover example app
-		uuv_example_app
-		work_item
+		#px4_mavlink_debug # Tutorial code from http://dev.px4.io/en/debug/debug_values.html
+		#px4_simple_app # Tutorial code from http://dev.px4.io/en/apps/hello_sky.html
+		#rover_steering_control # Rover example app
+		#uuv_example_app
+		#work_item
 	)

boards/px4/fmu-v5/stackcheck.cmake

@@ -122,7 +122,8 @@ px4_add_board(
 		ver
 		work_queue
 	EXAMPLES
-		#fake_gps
+		fake_gps
+		#fake_gyro
 		#fake_magnetometer
 		#fixedwing_control # Tutorial code from https://px4.io/dev/example_fixedwing_control
 		#hello

boards/px4/fmu-v5/test.cmake

@@ -0,0 +1,138 @@
+
+px4_add_board(
+	PLATFORM nuttx
+	VENDOR px4
+	MODEL fmu-v5
+	LABEL test
+	TOOLCHAIN arm-none-eabi
+	ARCHITECTURE cortex-m7
+	ROMFSROOT px4fmu_common
+	IO px4_io-v2_default
+	TESTING
+	UAVCAN_INTERFACES 2
+	SERIAL_PORTS
+		GPS1:/dev/ttyS0
+		TEL1:/dev/ttyS1
+		TEL2:/dev/ttyS2
+		TEL4:/dev/ttyS3
+	DRIVERS
+		adc/ads1115
+		adc/board_adc
+		barometer # all available barometer drivers
+		batt_smbus
+		camera_capture
+		camera_trigger
+		differential_pressure # all available differential pressure drivers
+		distance_sensor # all available distance sensor drivers
+		dshot
+		gps
+		#heater
+		#imu # all available imu drivers
+		imu/analog_devices/adis16448
+		imu/bosch/bmi055
+		imu/invensense/icm20602
+		imu/invensense/icm20689
+		imu/invensense/icm20948 # required for ak09916 mag
+		irlock
+		lights # all available light drivers
+		lights/rgbled_pwm
+		magnetometer # all available magnetometer drivers
+		optical_flow # all available optical flow drivers
+		osd
+		pca9685
+		pca9685_pwm_out
+		power_monitor/ina226
+		#protocol_splitter
+		pwm_input
+		pwm_out_sim
+		pwm_out
+		px4io
+		rc_input
+		roboclaw
+		rpm
+		safety_button
+		telemetry # all available telemetry drivers
+		test_ppm
+		tone_alarm
+		uavcan
+	MODULES
+		airspeed_selector
+		attitude_estimator_q
+		battery_status
+		camera_feedback
+		commander
+		dataman
+		ekf2
+		esc_battery
+		events
+		flight_mode_manager
+		fw_att_control
+		fw_pos_control_l1
+		gyro_calibration
+		gyro_fft
+		land_detector
+		landing_target_estimator
+		load_mon
+		local_position_estimator
+		logger
+		mavlink
+		mc_att_control
+		mc_hover_thrust_estimator
+		mc_pos_control
+		mc_rate_control
+		#micrortps_bridge
+		navigator
+		rc_update
+		rover_pos_control
+		sensors
+		sih
+		temperature_compensation
+		uuv_att_control
+		uuv_pos_control
+		vmount
+		vtol_att_control
+	SYSTEMCMDS
+		bl_update
+		dmesg
+		dumpfile
+		esc_calib
+		gpio
+		hardfault_log
+		i2cdetect
+		led_control
+		mft
+		mixer
+		motor_ramp
+		motor_test
+		mtd
+		nshterm
+		param
+		perf
+		pwm
+		reboot
+		reflect
+		sd_bench
+		serial_test
+		system_time
+		tests # tests and test runner
+		top
+		topic_listener
+		tune_control
+		uorb
+		usb_connected
+		ver
+		work_queue
+	EXAMPLES
+		fake_gps
+		fake_gyro
+		fake_magnetometer
+		fixedwing_control # Tutorial code from https://px4.io/dev/example_fixedwing_control
+		hello
+		hwtest # Hardware test
+		#matlab_csv_serial
+		px4_mavlink_debug # Tutorial code from http://dev.px4.io/en/debug/debug_values.html
+		px4_simple_app # Tutorial code from http://dev.px4.io/en/apps/hello_sky.html
+		rover_steering_control # Rover example app
+		uuv_example_app
+		work_item
+	)

boards/px4/fmu-v5/uavcanv0periph.cmake

@@ -8,7 +8,6 @@ px4_add_board(
 	ARCHITECTURE cortex-m7
 	ROMFSROOT px4fmu_common
 	IO px4_io-v2_default
-	#TESTING
 	UAVCAN_INTERFACES 2
 	UAVCAN_PERIPHERALS
 		cuav_can-gps-v1_default
@@ -56,7 +55,6 @@ px4_add_board(
 		#rpm
 		safety_button
 		telemetry # all available telemetry drivers
-		#test_ppm
 		tone_alarm
 		uavcan
 	MODULES
@@ -117,7 +115,6 @@ px4_add_board(
 		reflect
 		sd_bench
 		system_time
-		#tests # tests and test runner
 		top
 		topic_listener
 		tune_control
@@ -126,6 +123,7 @@ px4_add_board(
 		ver
 		work_queue
 	EXAMPLES
+		fake_gps
 		#fake_gyro
 		#fake_magnetometer
 		#fixedwing_control # Tutorial code from https://px4.io/dev/example_fixedwing_control

boards/px4/fmu-v5/uavcanv1.cmake

@@ -8,7 +8,6 @@ px4_add_board(
 	ARCHITECTURE cortex-m7
 	ROMFSROOT px4fmu_common
 	IO px4_io-v2_default
-	#TESTING
 	UAVCAN_INTERFACES 2
 	SERIAL_PORTS
 		GPS1:/dev/ttyS0
@@ -52,7 +51,6 @@ px4_add_board(
 		rpm
 		safety_button
 		telemetry # all available telemetry drivers
-		#test_ppm
 		tone_alarm
 		#uavcan # legacy v0
 		uavcan_v1
@@ -115,7 +113,6 @@ px4_add_board(
 		sd_bench
 		serial_test
 		system_time
-		#tests # tests and test runner
 		top
 		topic_listener
 		tune_control
@@ -124,7 +121,7 @@ px4_add_board(
 		ver
 		work_queue
 	EXAMPLES
-		#fake_gps
+		fake_gps
 		#fake_gyro
 		#fake_magnetometer
 		#fixedwing_control # Tutorial code from https://px4.io/dev/example_fixedwing_control

boards/px4/fmu-v5x/base_phy_DP83848C.cmake

@@ -8,7 +8,6 @@ px4_add_board(
 	ARCHITECTURE cortex-m7
 	ROMFSROOT px4fmu_common
 	IO px4_io-v2_default
-	TESTING
 	UAVCAN_INTERFACES 2
 	ETHERNET
 	SERIAL_PORTS
@@ -53,7 +52,6 @@ px4_add_board(
 		rpm
 		safety_button
 		telemetry # all available telemetry drivers
-		test_ppm
 		tone_alarm
 		uavcan
 	MODULES
@@ -115,7 +113,6 @@ px4_add_board(
 		sd_bench
 		serial_test
 		system_time
-		tests # tests and test runner
 		top
 		topic_listener
 		tune_control

boards/px4/fmu-v5x/default.cmake

@@ -8,7 +8,6 @@ px4_add_board(
 	ARCHITECTURE cortex-m7
 	ROMFSROOT px4fmu_common
 	IO px4_io-v2_default
-	TESTING
 	UAVCAN_INTERFACES 2
 	ETHERNET
 	SERIAL_PORTS
@@ -53,7 +52,6 @@ px4_add_board(
 		rpm
 		safety_button
 		telemetry # all available telemetry drivers
-		test_ppm
 		tone_alarm
 		uavcan
 	MODULES
@@ -115,7 +113,6 @@ px4_add_board(
 		sd_bench
 		serial_test
 		system_time
-		tests # tests and test runner
 		top
 		topic_listener
 		tune_control

boards/px4/fmu-v5x/test.cmake

@@ -0,0 +1,139 @@
+
+px4_add_board(
+	PLATFORM nuttx
+	VENDOR px4
+	MODEL fmu-v5x
+	LABEL test
+	TOOLCHAIN arm-none-eabi
+	ARCHITECTURE cortex-m7
+	ROMFSROOT px4fmu_common
+	IO px4_io-v2_default
+	TESTING
+	UAVCAN_INTERFACES 2
+	ETHERNET
+	SERIAL_PORTS
+		GPS1:/dev/ttyS0
+		TEL1:/dev/ttyS6
+		TEL2:/dev/ttyS4
+		TEL3:/dev/ttyS1
+		GPS2:/dev/ttyS7
+	DRIVERS
+		adc/ads1115
+		adc/board_adc
+		barometer # all available barometer drivers
+		batt_smbus
+		camera_capture
+		camera_trigger
+		differential_pressure # all available differential pressure drivers
+		distance_sensor # all available distance sensor drivers
+		dshot
+		gps
+		heater
+		#imu # all available imu drivers
+		imu/analog_devices/adis16448
+		imu/bosch/bmi088
+		imu/invensense/icm20602
+		imu/invensense/icm20948 # required for ak09916 mag
+		imu/invensense/icm42688p
+		irlock
+		lights # all available light drivers
+		magnetometer # all available magnetometer drivers
+		optical_flow # all available optical flow drivers
+		osd
+		pca9685
+		pca9685_pwm_out
+		power_monitor/ina226
+		#protocol_splitter
+		pwm_input
+		pwm_out_sim
+		pwm_out
+		px4io
+		rc_input
+		roboclaw
+		rpm
+		safety_button
+		telemetry # all available telemetry drivers
+		test_ppm
+		tone_alarm
+		uavcan
+	MODULES
+		airspeed_selector
+		attitude_estimator_q
+		camera_feedback
+		commander
+		dataman
+		ekf2
+		esc_battery
+		events
+		flight_mode_manager
+		fw_att_control
+		fw_pos_control_l1
+		gyro_calibration
+		gyro_fft
+		land_detector
+		landing_target_estimator
+		load_mon
+		local_position_estimator
+		logger
+		mavlink
+		mc_att_control
+		mc_hover_thrust_estimator
+		mc_pos_control
+		mc_rate_control
+		#micrortps_bridge
+		navigator
+		rc_update
+		rover_pos_control
+		sensors
+		sih
+		temperature_compensation
+		#uuv_att_control
+		#uuv_pos_control
+		vmount
+		vtol_att_control
+	SYSTEMCMDS
+		bl_update
+		dmesg
+		dumpfile
+		esc_calib
+		gpio
+		hardfault_log
+		i2cdetect
+		led_control
+		mft
+		mixer
+		motor_ramp
+		motor_test
+		mtd
+		nshterm
+		netman
+		param
+		perf
+		pwm
+		reboot
+		reflect
+		sd_bench
+		serial_test
+		system_time
+		tests # tests and test runner
+		top
+		topic_listener
+		tune_control
+		uorb
+		usb_connected
+		ver
+		work_queue
+	EXAMPLES
+		fake_gps
+		#fake_gyro
+		#fake_magnetometer
+		#fixedwing_control # Tutorial code from https://px4.io/dev/example_fixedwing_control
+		#hello
+		#hwtest # Hardware test
+		#matlab_csv_serial
+		#px4_mavlink_debug # Tutorial code from http://dev.px4.io/en/debug/debug_values.html
+		#px4_simple_app # Tutorial code from http://dev.px4.io/en/apps/hello_sky.html
+		#rover_steering_control # Rover example app
+		#uuv_example_app
+		#work_item
+	)

boards/px4/fmu-v6u/default.cmake

@@ -109,7 +109,6 @@ px4_add_board(
 		sd_bench
 		serial_test
 		system_time
-		#tests # tests and test runner
 		top
 		topic_listener
 		tune_control

boards/px4/fmu-v6x/default.cmake

@@ -9,7 +9,6 @@ px4_add_board(
 	ROMFSROOT px4fmu_common
 	BUILD_BOOTLOADER
 	IO px4_io-v2_default
-	TESTING
 	UAVCAN_INTERFACES 2
 	UAVCAN_TIMER_OVERRIDE 2
 	ETHERNET
@@ -54,7 +53,6 @@ px4_add_board(
 		rpm
 		safety_button
 		telemetry # all available telemetry drivers
-		test_ppm
 		tone_alarm
 		uavcan
 	MODULES
@@ -116,8 +114,7 @@ px4_add_board(
 		sd_bench
 		serial_test
 		system_time
-#		tests # tests and test runner
-		top
+#		top
 		topic_listener
 		tune_control
 		uorb

boards/px4/fmu-v6x/test.cmake

@@ -0,0 +1,140 @@
+
+px4_add_board(
+	PLATFORM nuttx
+	VENDOR px4
+	MODEL fmu-v6x
+	LABEL test
+	TOOLCHAIN arm-none-eabi
+	ARCHITECTURE cortex-m7
+	ROMFSROOT px4fmu_common
+	BUILD_BOOTLOADER
+	IO px4_io-v2_default
+	TESTING
+	UAVCAN_INTERFACES 2
+	UAVCAN_TIMER_OVERRIDE 2
+	ETHERNET
+	SERIAL_PORTS
+		GPS1:/dev/ttyS0
+		TEL1:/dev/ttyS6
+		TEL2:/dev/ttyS4
+		TEL3:/dev/ttyS1
+		GPS2:/dev/ttyS7
+	DRIVERS
+		adc/ads1115
+		adc/board_adc
+		barometer # all available barometer drivers
+		batt_smbus
+		camera_capture
+		camera_trigger
+		differential_pressure # all available differential pressure drivers
+		distance_sensor # all available distance sensor drivers
+		dshot
+		gps
+		heater
+		#imu # all available imu drivers
+		imu/bosch/bmi088
+		imu/invensense/icm20602
+		imu/invensense/icm20649
+		imu/invensense/icm20948 # required for ak09916 mag
+		imu/invensense/icm42688p
+		irlock
+		lights # all available light drivers
+		magnetometer # all available magnetometer drivers
+		optical_flow # all available optical flow drivers
+		osd
+		pca9685
+		pca9685_pwm_out
+		power_monitor/ina226
+		#protocol_splitter
+		pwm_out_sim
+		pwm_out
+		px4io
+		rc_input
+		roboclaw
+		rpm
+		safety_button
+		telemetry # all available telemetry drivers
+		test_ppm
+		tone_alarm
+		uavcan
+	MODULES
+		airspeed_selector
+		attitude_estimator_q
+		camera_feedback
+		commander
+		dataman
+		ekf2
+		esc_battery
+		events
+		flight_mode_manager
+		fw_att_control
+		fw_pos_control_l1
+		gyro_calibration
+		gyro_fft
+		land_detector
+		landing_target_estimator
+		load_mon
+		local_position_estimator
+		logger
+		mavlink
+		mc_att_control
+		mc_hover_thrust_estimator
+		mc_pos_control
+		mc_rate_control
+		#micrortps_bridge
+		navigator
+		rc_update
+		rover_pos_control
+		sensors
+		sih
+		temperature_compensation
+		#uuv_att_control
+		#uuv_pos_control
+		vmount
+		vtol_att_control
+	SYSTEMCMDS
+		bl_update
+		dmesg
+		dumpfile
+		esc_calib
+		gpio
+		hardfault_log
+		i2cdetect
+		led_control
+		mft
+		mixer
+		motor_ramp
+		motor_test
+		mtd
+		nshterm
+		netman
+		param
+		perf
+		pwm
+		reboot
+		reflect
+		sd_bench
+		serial_test
+		system_time
+#		tests # tests and test runner
+		top
+		topic_listener
+		tune_control
+		uorb
+		usb_connected
+		ver
+		work_queue
+	EXAMPLES
+		fake_gps
+		#fake_gyro
+		#fake_magnetometer
+		#fixedwing_control # Tutorial code from https://px4.io/dev/example_fixedwing_control
+		#hello
+		#hwtest # Hardware test
+		#matlab_csv_serial
+		#px4_mavlink_debug # Tutorial code from http://dev.px4.io/en/debug/debug_values.html
+		#px4_simple_app # Tutorial code from http://dev.px4.io/en/apps/hello_sky.html
+		#rover_steering_control # Rover example app
+		#uuv_example_app
+		#work_item
+	)

boards/px4/sitl/ctrlalloc.cmake

@@ -5,7 +5,6 @@ px4_add_board(
 	MODEL sitl
 	ROMFSROOT px4fmu_common
 	LABEL ctrlalloc
-	EMBEDDED_METADATA parameters
 	TESTING
 	DRIVERS
 		#barometer # all available barometer drivers
@@ -90,6 +89,7 @@ px4_add_board(
 	EXAMPLES
 		dyn_hello # dynamically loading modules example
 		fake_gps
+		fake_gyro
 		fake_magnetometer
 		fixedwing_control # Tutorial code from https://px4.io/dev/example_fixedwing_control
 		hello

boards/px4/sitl/default.cmake

@@ -5,7 +5,6 @@ px4_add_board(
 	MODEL sitl
 	ROMFSROOT px4fmu_common
 	LABEL default
-	EMBEDDED_METADATA parameters
 	TESTING
 	ETHERNET
 	DRIVERS

boards/px4/sitl/nolockstep.cmake

@@ -5,7 +5,6 @@ px4_add_board(
 	MODEL sitl
 	ROMFSROOT px4fmu_common
 	LABEL nolockstep
-	EMBEDDED_METADATA parameters
 	TESTING
 	DRIVERS
 		#barometer # all available barometer drivers
@@ -88,6 +87,7 @@ px4_add_board(
 	EXAMPLES
 		dyn_hello # dynamically loading modules example
 		fake_gps
+		fake_gyro
 		fake_magnetometer
 		fixedwing_control # Tutorial code from https://px4.io/dev/example_fixedwing_control
 		hello

boards/px4/sitl/rtps.cmake

@@ -5,7 +5,6 @@ px4_add_board(
 	MODEL sitl
 	ROMFSROOT px4fmu_common
 	LABEL rtps
-	EMBEDDED_METADATA parameters
 	TESTING
 	DRIVERS
 		#barometer # all available barometer drivers
@@ -87,6 +86,7 @@ px4_add_board(
 	EXAMPLES
 		dyn_hello # dynamically loading modules example
 		fake_gps
+		fake_gyro
 		fake_magnetometer
 		fixedwing_control # Tutorial code from https://px4.io/dev/example_fixedwing_control
 		hello

boards/px4/sitl/test.cmake

@@ -5,7 +5,6 @@ px4_add_board(
 	MODEL sitl
 	ROMFSROOT px4fmu_common
 	LABEL test
-	EMBEDDED_METADATA parameters
 	TESTING
 	DRIVERS
 		#barometer # all available barometer drivers
@@ -87,6 +86,7 @@ px4_add_board(
 	EXAMPLES
 		dyn_hello # dynamically loading modules example
 		fake_gps
+		fake_gyro
 		fake_magnetometer
 		fixedwing_control # Tutorial code from https://px4.io/dev/example_fixedwing_control
 		hello

boards/scumaker/pilotpi/arm64.cmake

@@ -87,6 +87,8 @@ px4_add_board(
 	EXAMPLES
 		dyn_hello # dynamically loading modules example
 		fake_gps
+		fake_gyro
+		fake_magnetometer
 		fixedwing_control # Tutorial code from https://px4.io/dev/example_fixedwing_control
 		hello
 		#hwtest # Hardware test

boards/spracing/h7extreme/default.cmake

@@ -39,16 +39,12 @@ px4_add_board(
 		#pca9685
 		#power_monitor/ina226
 		#protocol_splitter
-#		pwm_input  - Need to create arch/stm32 arch/stm32h7 arch/kinetis and reloacate
-#					   all arch dependant code there
 		pwm_out_sim
 		pwm_out
 		#roboclaw
 		rc_input
 		telemetry # all available telemetry drivers
-		#test_ppm
 		tone_alarm
-#		uavcan - No H7 or FD can support in UAVCAN yet
 	MODULES
 		#airspeed_selector
 		attitude_estimator_q
@@ -100,7 +96,6 @@ px4_add_board(
 		reflect
 		sd_bench
 		#shutdown
-		#tests # tests and test runner
 		top
 		topic_listener
 		tune_control
@@ -109,7 +104,9 @@ px4_add_board(
 		ver
 		work_queue
 	EXAMPLES
-		#bottle_drop # OBC challenge
+		fake_gps
+		#fake_gyro
+		#fake_magnetometer
 		#fixedwing_control # Tutorial code from https://px4.io/dev/example_fixedwing_control
 		#hello
 		#hwtest # Hardware test
@@ -118,4 +115,5 @@ px4_add_board(
 		#px4_simple_app # Tutorial code from http://dev.px4.io/en/apps/hello_sky.html
 		#rover_steering_control # Rover example app
 		#uuv_example_app
+		#work_item
 	)

cmake/px4_add_board.cmake

@@ -57,9 +57,9 @@
 #			[ SERIAL_PORTS <list> ]
 #			[ CONSTRAINED_FLASH ]
 #			[ CONSTRAINED_MEMORY ]
+#			[ EXTERNAL_METADATA ]
 #			[ TESTING ]
 #			[ LINKER_PREFIX <string> ]
-#			[ EMBEDDED_METADATA <string> ]
 #			[ ETHERNET ]
 #			)
 #
@@ -80,9 +80,9 @@
 #		SYSTEMCMDS		: list of system commands to build for this board (relative to src/systemcmds)
 #		EXAMPLES		: list of example modules to build for this board (relative to src/examples)
 #		SERIAL_PORTS		: mapping of user configurable serial ports and param facing name
-#		EMBEDDED_METADATA	: list of metadata to embed to ROMFS
 #		CONSTRAINED_FLASH	: flag to enable constrained flash options (eg limit init script status text)
 #		CONSTRAINED_MEMORY	: flag to enable constrained memory options (eg limit maximum number of uORB publications)
+#		EXTERNAL_METADATA	: flag to exclude metadata to reduce flash
 #		TESTING			: flag to enable automatic inclusion of PX4 testing modules
 #		LINKER_PREFIX	: optional to prefix on the Linker script.
 #		ETHERNET		: flag to indicate that ethernet is enabled
@@ -156,11 +156,11 @@ function(px4_add_board)
 			EXAMPLES
 			SERIAL_PORTS
 			UAVCAN_PERIPHERALS
-			EMBEDDED_METADATA
 		OPTIONS
 			BUILD_BOOTLOADER
 			CONSTRAINED_FLASH
 			CONSTRAINED_MEMORY
+			EXTERNAL_METADATA
 			TESTING
 			ETHERNET
 		REQUIRED
@@ -207,14 +207,11 @@ function(px4_add_board)
 
 	set(romfs_extra_files)
 	set(config_romfs_extra_dependencies)
-	foreach(metadata ${EMBEDDED_METADATA})
-		if(${metadata} STREQUAL "parameters")
-			list(APPEND romfs_extra_files ${PX4_BINARY_DIR}/parameters.json.xz)
-			list(APPEND romfs_extra_dependencies parameters_xml)
-		else()
-			message(FATAL_ERROR "invalid value for EMBEDDED_METADATA: ${metadata}")
-		endif()
-	endforeach()
+	# additional embedded metadata
+	if (NOT CONSTRAINED_FLASH AND NOT EXTERNAL_METADATA AND NOT ${PX4_BOARD_LABEL} STREQUAL "test")
+		list(APPEND romfs_extra_files ${PX4_BINARY_DIR}/parameters.json.xz)
+		list(APPEND romfs_extra_dependencies parameters_xml)
+	endif()
 	list(APPEND romfs_extra_files ${PX4_BINARY_DIR}/component_general.json.xz)
 	list(APPEND romfs_extra_dependencies component_general_json)
 	set(config_romfs_extra_files ${romfs_extra_files} CACHE INTERNAL "extra ROMFS files" FORCE)

cmake/px4_add_common_flags.cmake

@@ -95,21 +95,17 @@ function(px4_add_common_flags)
 	# compiler specific flags
 	if (("${CMAKE_CXX_COMPILER_ID}" MATCHES "Clang") OR ("${CMAKE_CXX_COMPILER_ID}" MATCHES "AppleClang"))
 
-		# force color for clang (needed for clang + ccache)
-		add_compile_options(-fcolor-diagnostics)
-		# force absolute paths
-		add_compile_options(-fdiagnostics-absolute-paths)
+		add_compile_options(
+			-fcolor-diagnostics # force color for clang (needed for clang + ccache)
+			-fdiagnostics-absolute-paths # force absolute paths
 
-		# QuRT 6.4.X compiler identifies as Clang but does not support this option
-		if (NOT "${PX4_PLATFORM}" STREQUAL "qurt")
-			add_compile_options(
-				-Qunused-arguments
+			-Qunused-arguments
 
-				-Wno-unknown-warning-option
-				-Wno-unused-const-variable
-				-Wno-varargs
-			)
-		endif()
+			-Wno-c99-designator
+			-Wno-unknown-warning-option
+			-Wno-unused-const-variable
+			-Wno-varargs
+		)
 
 	elseif ("${CMAKE_CXX_COMPILER_ID}" STREQUAL "GNU")
 

msg/battery_status.msg

@@ -25,9 +25,9 @@ uint16 manufacture_date		# manufacture date, part of serial number of the batter
 uint16 state_of_health		# state of health. FullChargeCapacity/DesignCapacity.
 uint16 max_error			# max error, expected margin of error in % in the state-of-charge calculation with a range of 1 to 100%
 uint8 id					# ID number of a battery. Should be unique and consistent for the lifetime of a vehicle. 1-indexed.
-uint16 interface_error		# SMBUS interface error counter
+uint16 interface_error		# interface error counter
 
-float32[10] voltage_cell_v		# Battery individual cell voltages
+float32[14] voltage_cell_v		# Battery individual cell voltages
 float32 max_cell_voltage_delta	# Max difference between individual cell voltages
 
 bool is_powering_off			# Power off event imminent indication, false if unknown
@@ -43,3 +43,11 @@ uint8 warning						# current battery warning
 
 
 uint8 MAX_INSTANCES = 4
+
+float32 average_power               # The average power of the current discharge
+float32 available_energy            # The predicted charge or energy remaining in the battery
+float32 remaining_capacity          # The compensated battery capacity remaining
+float32 design_capacity             # The design capacity of the battery
+uint16 average_time_to_full         # The predicted remaining time until the battery reaches full charge, in minutes
+uint16 over_discharge_count         # Number of battery overdischarge
+float32 nominal_voltage             # Nominal voltage of the battery pack

msg/templates/urtps/microRTPS_agent.cpp.em

@@ -120,8 +120,8 @@ static void usage(const char *name)
              "  -i <ip_address>         Target IP for UDP. Default 127.0.0.1\n"
              "  -n <namespace>          ROS 2 topics namespace. Identifies the vehicle in a multi-agent network\n"
              "  -p <poll_ms>            Time in ms to poll over UART. Default 1ms\n"
-             "  -r <reception port>     UDP port for receiving. Default 2019\n"
-             "  -s <sending port>       UDP port for sending. Default 2020\n"
+             "  -r <reception port>     UDP port for receiving. Default 2020\n"
+             "  -s <sending port>       UDP port for sending. Default 2019\n"
              "  -t <transport>          [UART|UDP] Default UART\n"
              "  -v <debug verbosity>    Add more verbosity\n"
              "  -w <sleep_time_us>      Time in us for which each iteration sleep. Default 1ms\n",

platforms/nuttx/src/canbootloader/arch/stm/stm32f3/CMakeLists.txt

@@ -1,44 +0,0 @@
-############################################################################
-#
-#   Copyright (c) 2019 PX4 Development Team. All rights reserved.
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions
-# are met:
-#
-# 1. Redistributions of source code must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-# 2. Redistributions in binary form must reproduce the above copyright
-#    notice, this list of conditions and the following disclaimer in
-#    the documentation and/or other materials provided with the
-#    distribution.
-# 3. Neither the name PX4 nor the names of its contributors may be
-#    used to endorse or promote products derived from this software
-#    without specific prior written permission.
-#
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
-# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
-# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
-# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
-# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
-# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
-# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
-# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-# POSSIBILITY OF SUCH DAMAGE.
-#
-############################################################################
-
-include_directories(../../../include)
-
-px4_add_library(arch_canbootloader
-	board_identity.c
-	drivers/can/driver.c
-)
-
-target_link_libraries(arch_canbootloader
-	PRIVATE
-		arch_watchdog_iwdg
-)

platforms/nuttx/src/canbootloader/arch/stm/stm32f3/board_identity.c

@@ -1,56 +0,0 @@
-/****************************************************************************
- *
- *   Copyright (C) 2017 PX4 Development Team. All rights reserved.
- *   Author: @author David Sidrane <david_s5@nscdg.com>
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- * 3. Neither the name PX4 nor the names of its contributors may be
- *    used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ****************************************************************************/
-
-/**
- * @file board_identity.c
- * Implementation of STM32 based Board identity API
- */
-
-#include <px4_config.h>
-#include <stdio.h>
-#include <string.h>
-
-#define SWAP_UINT32(x) (((x) >> 24) | (((x) & 0x00ff0000) >> 8) | (((x) & 0x0000ff00) << 8) | ((x) << 24))
-
-int board_get_mfguid(mfguid_t mfgid)
-{
-	uint32_t *chip_uuid = (uint32_t *) STM32_SYSMEM_UID;
-	uint32_t  *rv = (uint32_t *) &mfgid[0];
-
-	for (unsigned int i = 0; i < PX4_CPU_UUID_WORD32_LENGTH; i++) {
-		*rv++ = SWAP_UINT32(chip_uuid[(PX4_CPU_UUID_WORD32_LENGTH - 1) - i]);
-	}
-
-	return PX4_CPU_MFGUID_BYTE_LENGTH;
-}