Makefile: add target for unit tests

2026-05-28 04:40:06 +08:00 · 2022-10-26 19:40:31 +02:00
1237 changed files with 27189 additions and 48700 deletions
@@ -61,13 +61,9 @@ pipeline {
                    sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "IMU_GYRO_RATEMAX" --value "2000"'
                    sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "SYS_AUTOSTART" --value "13000"'   // generic vtol standard
                    sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "SYS_BL_UPDATE" --value "1"'       // update bootloader
-                    sh './Tools/HIL/reboot.py --device `find /dev/serial -name *usb-*`' // reboot to apply
-
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "logger on"' // run logger
                    checkStatus()
                    quickCalibrate()
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "px4io status"'
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "logger off"' // stop logger
                  }
                }
                stage("print topics") {
@@ -136,12 +132,8 @@ pipeline {
                    sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "IMU_GYRO_RATEMAX" --value "2000"'
                    sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "SYS_AUTOSTART" --value "13000"'   // generic vtol standard
                    sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "SYS_BL_UPDATE" --value "1"'       // update bootloader
-                    sh './Tools/HIL/reboot.py --device `find /dev/serial -name *usb-*`' // reboot to apply
-
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "logger on"' // run logger
                    checkStatus()
                    quickCalibrate()
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "logger off"' // stop logger
                  }
                }
                stage("print topics") {
@@ -160,6 +152,76 @@ pipeline {
          }
        }

+        stage("px4_fmu-v3_test") {
+          stages {
+            stage("build px4_fmu-v3_test") {
+              agent {
+                docker {
+                  image 'px4io/px4-dev-nuttx-focal:2021-09-08'
+                  args '--cpu-shares 512 -e CCACHE_BASEDIR=$WORKSPACE -v ${CCACHE_DIR}:${CCACHE_DIR}:rw'
+                }
+              }
+              steps {
+                checkoutSCM()
+                sh 'make px4_fmu-v3_test'
+                sh 'make px4_fmu-v3_test bootloader_elf'
+                sh 'ccache -s'
+                stash includes: 'build/*/*.elf, platforms/nuttx/Debug/*, platforms/nuttx/NuttX/nuttx/tools/nuttx-gdbinit, Tools/HIL/*', name: 'px4_fmu-v3_test'
+              }
+              post {
+                always {
+                  sh 'make distclean; git clean -ff -x -d .'
+                }
+              }
+            } // stage build
+            stage("hardware") {
+              agent {
+                label 'px4_fmu-v3'
+              }
+              stages {
+                stage("flash") {
+                  steps {
+                    sh 'export'
+                    sh 'find /dev/serial'
+                    unstash 'px4_fmu-v3_test'
+                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/px4_fmu-v3_test/px4_fmu-v3_bootloader.elf'
+                    // flash board and watch bootup
+                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/px4_fmu-v3_test/px4_fmu-v3_test.elf && ./Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-*` --baudrate 57600'
+                    resetBoard()
+                  }
+                }
+                stage("tests") {
+                  steps {
+                    runTests()
+                  }
+                }
+                stage("status") {
+                  steps {
+                    // configure
+                    resetParameters()
+                    sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "SYS_AUTOSTART" --value "13000"'   // generic vtol standard
+                    sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "SYS_BL_UPDATE" --value "1"'       // update bootloader
+                    checkStatus()
+                    quickCalibrate()
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "px4io status"'
+                  }
+                }
+                stage("print topics") {
+                  steps {
+                    printTopics()
+                  }
+                }
+              }
+              post {
+                always {
+                  sh 'cat /tmp/pyserial_spy_file.txt || true'
+                  sh './platforms/nuttx/Debug/jlink_gdb_backtrace_simple.sh build/px4_fmu-v3_test/px4_fmu-v3_test.elf || true'
+                }
+              }
+            } // stage test
+          }
+        }
+
        stage("px4_fmu-v4_test") {
          stages {
            stage("build px4_fmu-v4_test") {
@@ -209,12 +271,8 @@ pipeline {
                    resetParameters()
                    sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "SYS_AUTOSTART" --value "4001"'    // generic quadcopter
                    sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "SYS_BL_UPDATE" --value "1"'       // update bootloader
-                    sh './Tools/HIL/reboot.py --device `find /dev/serial -name *usb-*`' // reboot to apply
-
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "logger on"' // run logger
                    checkStatus()
                    quickCalibrate()
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "logger off"' // stop logger
                  }
                }
                stage("print topics") {
@@ -282,13 +340,9 @@ pipeline {
                    resetParameters()
                    sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "SYS_AUTOSTART" --value "13000"'   // generic vtol standard
                    sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "SYS_BL_UPDATE" --value "1"'       // update bootloader
-                    sh './Tools/HIL/reboot.py --device `find /dev/serial -name *usb-*`' // reboot to apply
-
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "logger on"' // run logger
                    checkStatus()
                    quickCalibrate()
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "px4io status"'
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "logger off"' // stop logger
                  }
                }
                stage("print topics") {
@@ -377,7 +431,6 @@ pipeline {
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set IMU_GYRO_RATEMAX 200" || true' // limit cpu usage
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set MAV_0_CONFIG 0" || true'       // limit cpu usage
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set MAV_1_CONFIG 0" || true'       // limit cpu usage
-                    sh './Tools/HIL/reboot.py --device `find /dev/serial -name *usb-*`' // reboot to apply
                    checkStatus()
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "px4io status" || true'
                  }
@@ -460,7 +513,6 @@ pipeline {
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set IMU_GYRO_RATEMAX 200" || true' // limit cpu usage
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set MAV_0_CONFIG 0" || true'       // limit cpu usage
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set MAV_1_CONFIG 0" || true'       // limit cpu usage
-                    sh './Tools/HIL/reboot.py --device `find /dev/serial -name *usb-*`' // reboot to apply
                    checkStatus()
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "px4io status" || true'
                  }
@@ -530,13 +582,9 @@ pipeline {
                    resetParameters()
                    sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "SYS_AUTOSTART" --value "4001"'    // generic quadcopter
                    sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "SYS_BL_UPDATE" --value "1"'       // update bootloader
-                    sh './Tools/HIL/reboot.py --device `find /dev/serial -name *usb-*`' // reboot to apply
-
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "logger on"' // run logger
                    checkStatus()
                    quickCalibrate()
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "px4io status" || true'
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "logger off"' // stop logger
                  }
                }
                stage("print topics") {
@@ -605,12 +653,8 @@ pipeline {
                    sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "IMU_GYRO_RATEMAX" --value "400"'
                    sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "SYS_AUTOSTART" --value "4001"'    // generic quadcopter
                    sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "SYS_BL_UPDATE" --value "1"'       // update bootloader
-                    sh './Tools/HIL/reboot.py --device `find /dev/serial -name *usb-*`' // reboot to apply
-
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "logger on"' // run logger
                    checkStatus()
                    quickCalibrate()
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "logger off"' // stop logger
                  }
                }
                stage("print topics") {
@@ -684,8 +728,14 @@ void checkStatus() {
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param save"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param status"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param show SYS*"'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "bsondump /fs/mtd_params"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param dump"'
+  sh './Tools/HIL/reboot.py --device `find /dev/serial -name *usb-*`' // reboot to apply
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param show SYS*"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param dump"'

+  // run logger
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "logger on"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "sleep 1"' // sleep before continuing
  // status commands
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "cat /proc/fs/blocks"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "cat /proc/fs/mount"'
@@ -715,7 +765,7 @@ void checkStatus() {
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "mavlink status" || true'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "mount"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "mtd status"'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "bsondump /fs/mtd_params"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param dump"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param show" || true'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param status"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "perf latency"'
@@ -729,6 +779,8 @@ void checkStatus() {
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "uorb top -1 -a" || true'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "ver all"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "work_queue status"'
+  // stop logger
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "logger off"'
 }

 void resetParameters() {
@@ -767,13 +819,13 @@ void runTests() {

  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "tests file" || true'

-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "bsondump /fs/mtd_params"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param dump /fs/mtd_params"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "mtd readtest"'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "bsondump /fs/mtd_params"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param dump /fs/mtd_params"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "mtd rwtest"'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "bsondump /fs/mtd_params"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param dump /fs/mtd_params"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "mtd erase"'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "bsondump /fs/mtd_params" || true' // expected to fail after erase
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param dump /fs/mtd_params"'

  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "sd_bench"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "sd_bench -v"'
@@ -868,6 +920,7 @@ void printTopics() {
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener tune_control" || true'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener vehicle_acceleration" || true'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener vehicle_air_data" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener vehicle_angular_acceleration" || true'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener vehicle_angular_velocity" || true'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener vehicle_attitude" || true'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener vehicle_attitude_setpoint" || true'
@@ -5,7 +5,7 @@ labels: feature-request

 ---

-For general questions please use [PX4 Discuss](http://discuss.px4.io/) or Discord (you can find an invite link on this project README).
+For general questions please use [PX4 Discuss](http://discuss.px4.io/) or Slack (you can find an invite link on this project README).

 ## Describe problem solved by the proposed feature
 A clear and concise description of the problem, if any, this feature will solve. E.g. I'm always frustrated when ...
@@ -1,29 +1,17 @@
-<!--
+Please use [PX4 Discuss](http://discuss.px4.io/) or [Slack](http://slack.px4.io/) to align on pull requests if necessary. You can then open draft pull requests to get early feedback.

-Thank you for your contribution!
+## Describe problem solved by this pull request
+A clear and concise description of the problem this proposed change will solve. Or, what it will improve.
+E.g. For this use case I ran into...

-Get early feedback through
- Dronecode Discord: https://discord.gg/dronecode
- PX4 Discuss: http://discuss.px4.io/
- opening a draft pr and sharing the link
+## Describe your solution
+A clear and concise description of what you have implemented.

-->
+## Describe possible alternatives
+A clear and concise description of alternative solutions or features you've considered.

-### Solved Problem
-When ... I found that ...
+## Test data / coverage
+How was it tested? What cases were covered? Logs uploaded to https://review.px4.io/ and screenshots of the important plot parts.

-Fixes #{Github issue ID}
-
-### Solution
- Add ... for ...
- Refactor ...
-
-### Alternatives
-We could also ...
-
-### Test coverage
- Unit/integration test: ...
- Simulation/hardware testing logs: https://review.px4.io/
-
-### Context
-Related links, screenshot before/after, video
+## Additional context
+Add any other related context or media.
@@ -54,7 +54,6 @@ jobs:
          nxp_fmuk66-e,
          nxp_fmuk66-v3,
          nxp_fmurt1062-v1,
-          nxp_mr-canhubk3,
          nxp_ucans32k146,
          omnibus_f4sd,
          px4_fmu-v2,
@@ -16,7 +16,7 @@ jobs:
      matrix:
        config:
          - {model: "iris",          latitude:  "59.617693", longitude: "-151.145316", altitude:  "48", build_type: "RelWithDebInfo" } # Alaska
-          # - {model: "standard_vtol", latitude: "-38.071235", longitude:  "145.281220", altitude:  "31", build_type: "AddressSanitizer" } # Australia
+          - {model: "standard_vtol", latitude: "-38.071235", longitude:  "145.281220", altitude:  "31", build_type: "AddressSanitizer" } # Australia
          - {model: "tailsitter" ,   latitude:  "29.660316", longitude:  "-82.316658", altitude:  "30", build_type: "RelWithDebInfo" } # Florida
          - {model: "standard_vtol", latitude:  "47.397742", longitude:    "8.545594", altitude: "488", build_type: "Coverage" } # Zurich

@@ -81,7 +81,7 @@ jobs:
      env:
        PX4_CMAKE_BUILD_TYPE: ${{matrix.config.build_type}}
        DONT_RUN: 1
-      run: make px4_sitl_default sitl_gazebo mavsdk_tests
+      run: make px4_sitl_default gazebo mavsdk_tests
    - name: ccache post-run mavsdk_tests
      run: ccache -s

@@ -47,8 +47,6 @@ GTAGS
 *.files
 *.includes

-Tools/jlink-nuttx.so
-
 # CLion ignores
 .idea
 cmake-build-*/
@@ -21,11 +21,11 @@
 [submodule "platforms/nuttx/NuttX/nuttx"]
 	path = platforms/nuttx/NuttX/nuttx
 	url = https://github.com/PX4/NuttX.git
-	branch = px4_firmware_nuttx-10.3.0+
+	branch = px4_firmware_nuttx-10.1.0+
 [submodule "platforms/nuttx/NuttX/apps"]
 	path = platforms/nuttx/NuttX/apps
 	url = https://github.com/PX4/NuttX-apps.git
-	branch = px4_firmware_nuttx-10.3.0+
+	branch = px4_firmware_nuttx-10.1.0+
 [submodule "Tools/flightgear_bridge"]
 	path = Tools/simulation/flightgear/flightgear_bridge
 	url = https://github.com/PX4/PX4-FlightGear-Bridge.git
@@ -119,9 +119,7 @@
                "utility": "cpp",
                "valarray": "cpp",
                "variant": "cpp",
-                "vector": "cpp",
-                "Jenkinsfile*": "groovy",
-                "*.sdf": "xml"
+                "vector": "cpp"
        },
        "search.exclude": {
                "${workspaceFolder}/build": true
@@ -135,5 +133,6 @@
        "workbench.settings.enableNaturalLanguageSearch": false,
        "yaml.schemas": {
                "${workspaceFolder}/validation/module_schema.yaml": "${workspaceFolder}/src/modules/*/module.yaml"
-        }
+        },
+        "cortex-debug.openocdPath": "${env:PICO_SDK_PATH}/../openocd/src/openocd"       // Added for rp2040
 }
@@ -49,6 +49,49 @@
                "group": "test"
            }
        },
+        {
+            "label": "jmavsim build",
+            "type": "shell",
+            "command": "ant create_run_jar copy_res",
+            "options": {
+                "cwd": "${workspaceFolder}/Tools/simulation/jmavsim/jMAVSim"
+            },
+            "presentation": {
+                "echo": true,
+                "reveal": "never",
+                "revealProblems": "onProblem",
+                "focus": false,
+                "panel": "dedicated",
+                "showReuseMessage": false,
+                "clear": false,
+                "close": true
+            },
+            "problemMatcher": []
+        },
+        {
+            "label": "jmavsim",
+            "type": "shell",
+            "dependsOn": "jmavsim build",
+            "command": "java -Djava.ext.dirs= -jar jmavsim_run.jar -r 250 -lockstep -tcp localhost:4560 -qgc",
+            "options": {
+                "cwd": "${workspaceFolder}/Tools/simulation/jmavsim/jMAVSim/out/production",
+                "env": {
+                    "PX4_SIM_SPEED_FACTOR": "1"
+                }
+            },
+            "isBackground": true,
+            "presentation": {
+                "echo": true,
+                "reveal": "never",
+                "revealProblems": "onProblem",
+                "focus": false,
+                "panel": "dedicated",
+                "showReuseMessage": false,
+                "clear": false,
+                "close": true
+            },
+            "problemMatcher": []
+        },
        {
            "label": "jmavsim kill",
            "type": "shell",
@@ -1,6 +1,6 @@
 ############################################################################
 #
-# Copyright (c) 2017 - 2022 PX4 Development Team. All rights reserved.
+# Copyright (c) 2017 - 2019 PX4 Development Team. All rights reserved.
 #
 # Redistribution and use in source and binary forms, with or without
 # modification, are permitted provided that the following conditions
@@ -143,17 +143,25 @@ define_property(GLOBAL PROPERTY PX4_SRC_FILES
 # configuration
 #

+set(CONFIG "px4_sitl_default" CACHE STRING "desired configuration")
+
 include(px4_add_module)
 set(config_module_list)
 set(config_kernel_list)

 # Find Python
-find_package(PythonInterp 3)
-# We have a custom error message to tell users how to install python3.
-if(NOT PYTHONINTERP_FOUND)
-	message(FATAL_ERROR "Python 3 not found. Please install Python 3:\n"
-		"    Ubuntu: sudo apt install python3 python3-dev python3-pip\n"
-		"    macOS: brew install python")
+# If using catkin, Python 2 is found since it points
+# to the Python libs installed with the ROS distro
+if (NOT CATKIN_DEVEL_PREFIX)
+	find_package(PythonInterp 3)
+	# We have a custom error message to tell users how to install python3.
+	if (NOT PYTHONINTERP_FOUND)
+		message(FATAL_ERROR "Python 3 not found. Please install Python 3:\n"
+			"    Ubuntu: sudo apt install python3 python3-dev python3-pip\n"
+			"    macOS: brew install python")
+	endif()
+else()
+	find_package(PythonInterp REQUIRED)
 endif()

 option(PYTHON_COVERAGE "Python code coverage" OFF)
@@ -199,11 +207,6 @@ if(EXISTS "${PX4_SOURCE_DIR}/platforms/${PX4_PLATFORM}/cmake/init.cmake")
 	include(init)
 endif()

-#=============================================================================
-# project definition
-#
-project(px4 CXX C ASM)
-
 # CMake build type (Debug Release RelWithDebInfo MinSizeRel Coverage)
 if(NOT CMAKE_BUILD_TYPE)
 	if(${PX4_PLATFORM} STREQUAL "nuttx")
@@ -232,6 +235,11 @@ endif()
 set_property(CACHE CMAKE_BUILD_TYPE PROPERTY STRINGS "Debug;Release;RelWithDebInfo;MinSizeRel;Coverage;AddressSanitizer;UndefinedBehaviorSanitizer")
 message(STATUS "cmake build type: ${CMAKE_BUILD_TYPE}")

+#=============================================================================
+# project definition
+#
+project(px4 CXX C ASM)
+
 # Check if LTO option and check if toolchain supports it
 if(LTO)
    include(CheckIPOSupported)
@@ -248,9 +256,15 @@ set(CMAKE_C_STANDARD 11)
 set(CMAKE_C_STANDARD_REQUIRED ON)
 set(CMAKE_EXPORT_COMPILE_COMMANDS ON)

-set(CMAKE_RUNTIME_OUTPUT_DIRECTORY ${PX4_BINARY_DIR})
-set(CMAKE_RUNTIME_OUTPUT_DIRECTORY_DEBUG ${PX4_BINARY_DIR})
-set(CMAKE_RUNTIME_OUTPUT_DIRECTORY_RELEASE ${PX4_BINARY_DIR})
+# For the catkin build process, unset build of dynamically-linked binaries
+# and do not change CMAKE_RUNTIME_OUTPUT_DIRECTORY
+if (NOT CATKIN_DEVEL_PREFIX)
+	set(CMAKE_RUNTIME_OUTPUT_DIRECTORY ${PX4_BINARY_DIR})
+	set(CMAKE_RUNTIME_OUTPUT_DIRECTORY_DEBUG ${PX4_BINARY_DIR})
+	set(CMAKE_RUNTIME_OUTPUT_DIRECTORY_RELEASE ${PX4_BINARY_DIR})
+else()
+	SET(BUILD_SHARED_LIBS OFF)
+endif()

 #=============================================================================

@@ -282,10 +296,7 @@ if(${PX4_PLATFORM} STREQUAL "posix")
 	set(CMAKE_POSITION_INDEPENDENT_CODE ON)
 	set(CMAKE_ENABLE_EXPORTS ON)

-	if(CMAKE_BUILD_TYPE MATCHES "Coverage")
-		include(coverage)
-	endif()
-
+	include(coverage)
 	include(sanitizers)

 	# Define GNU standard installation directories
@@ -298,6 +309,21 @@ endif()

 include(ccache)

+#=============================================================================
+# find programs and packages
+#
+
+# see if catkin was invoked to build this
+if (CATKIN_DEVEL_PREFIX)
+	message(STATUS "catkin ENABLED")
+	find_package(catkin REQUIRED)
+	if (catkin_FOUND)
+		catkin_package()
+	else()
+		message(FATAL_ERROR "catkin not found")
+	endif()
+endif()
+
 #=============================================================================
 # get chip and chip manufacturer
 #
@@ -384,7 +410,7 @@ if(BUILD_TESTING)
 	include(gtest)

 	add_custom_target(test_results
-			COMMAND GTEST_COLOR=1 ${CMAKE_CTEST_COMMAND} --output-on-failure -T Test -R ${TESTFILTER} USES_TERMINAL
+			COMMAND GTEST_COLOR=1 ${CMAKE_CTEST_COMMAND} --output-on-failure -T Test -R \"${TESTFILTER}\" USES_TERMINAL
 			DEPENDS
 				px4
 				examples__dyn_hello
@@ -424,10 +450,10 @@ add_subdirectory(src/lib/metadata EXCLUDE_FROM_ALL)
 add_subdirectory(src/lib/parameters EXCLUDE_FROM_ALL)

 if(${PX4_PLATFORM} STREQUAL "nuttx" AND NOT CONFIG_BUILD_FLAT)
-	target_link_libraries(parameters_interface INTERFACE usr_parameters)
-	target_link_libraries(kernel_parameters_interface INTERFACE parameters)
+target_link_libraries(parameters_interface INTERFACE usr_parameters)
+target_link_libraries(kernel_parameters_interface INTERFACE parameters)
 else()
-	target_link_libraries(parameters_interface INTERFACE parameters)
+target_link_libraries(parameters_interface INTERFACE parameters)
 endif()

 # firmware added last to generate the builtin for included modules
@@ -460,13 +486,17 @@ include(doxygen)
 include(metadata)
 include(package)

+# print size
+add_custom_target(size
+	COMMAND size $<TARGET_FILE:px4>
+	DEPENDS px4
+	WORKING_DIRECTORY ${PX4_BINARY_DIR}
+	USES_TERMINAL
+	)
+
 # install python requirements using configured python
 add_custom_target(install_python_requirements
 	COMMAND ${PYTHON_EXECUTABLE} -m pip install --requirement ${PX4_SOURCE_DIR}/Tools/setup/requirements.txt
 	DEPENDS ${PX4_SOURCE_DIR}/Tools/setup/requirements.txt
 	USES_TERMINAL
 )
-
-if(EXISTS "${PX4_SOURCE_DIR}/platforms/${PX4_PLATFORM}/cmake/finalize.cmake")
-	include(finalize)
-endif()
@@ -94,22 +94,21 @@ pipeline {

        stage('failsafe docs') {
          agent {
-            docker { image 'px4io/px4-dev-nuttx-focal:2021-08-18' }
+            docker { image 'px4io/px4-dev-base-focal:2021-08-18' }
          }
          steps {
            sh '''#!/bin/bash -l
-            echo $0;
+			echo $0;
            git clone https://github.com/emscripten-core/emsdk.git _emscripten_sdk;
            cd _emscripten_sdk;
            ./emsdk install latest;
            ./emsdk activate latest;
-            cd ..;
            . ./_emscripten_sdk/emsdk_env.sh;
-            make failsafe_web;
-            cd build/px4_sitl_default_failsafe_web;
-            mkdir -p failsafe_sim;
-            cp index.* parameters.json failsafe_sim;
-            '''
+			make failsafe_web;
+			cd build/px4_sitl_default_failsafe_web;
+			mkdir -p failsafe_sim;
+			cp index.* parameters.json failsafe_sim;
+			'''
            dir('build/px4_sitl_default_failsafe_web') {
              archiveArtifacts(artifacts: 'failsafe_sim/*')
              stash includes: 'failsafe_sim/*', name: 'failsafe_sim'
@@ -17,8 +17,6 @@ menu "Toolchain"
            bool "posix"
        config PLATFORM_QURT
            bool "qurt"
-        config PLATFORM_ROS2
-            bool "ros2"
    endchoice

    config BOARD_PLATFORM
@@ -26,7 +24,6 @@ menu "Toolchain"
        default "nuttx" if PLATFORM_NUTTX
        default "posix" if PLATFORM_POSIX
        default "qurt" if PLATFORM_QURT
-        default "ros2" if PLATFORM_ROS2

    config BOARD_LOCKSTEP
        bool "Force enable lockstep"
@@ -40,8 +37,8 @@ menu "Toolchain"
        help
            forces nolockstep behaviour, despite REPLAY env variable

-    config BOARD_LINUX_TARGET
-        bool "Linux OS Target"
+    config BOARD_LINUX
+        bool "Linux OS"
        depends on PLATFORM_POSIX
        help
            Board Platform is running the Linux operating system
@@ -174,8 +171,8 @@ menu "Serial ports"
    config BOARD_SERIAL_WIFI
        string "WIFI tty port"

-    config BOARD_SERIAL_EXT2
-        string "EXT2 tty port"
+    config BOARD_SERIAL_PPB
+        string "PPB (Pixhawk Payload Bus) tty port"
 endmenu

 menu "drivers"
@@ -193,8 +190,3 @@ endmenu
 menu "examples"
 source "src/examples/Kconfig"
 endmenu
-
-menu "platforms"
-depends on PLATFORM_QURT || PLATFORM_POSIX
-source "platforms/common/Kconfig"
-endmenu
@@ -324,10 +324,6 @@ px4io_update:
 	cp build/cubepilot_io-v2_default/cubepilot_io-v2_default.bin boards/cubepilot/cubeyellow/extras/cubepilot_io-v2_default.bin
 	git status

-jlink-nuttx:
-	$(CC) -shared -fPIC platforms/nuttx/NuttX/nuttx/tools/jlink-nuttx.c -o Tools/jlink-nuttx.so
-
-
 bootloaders_update: ark_fmu-v6x_bootloader cuav_nora_bootloader cuav_x7pro_bootloader cubepilot_cubeorange_bootloader holybro_durandal-v1_bootloader holybro_kakuteh7_bootloader matek_h743_bootloader matek_h743-mini_bootloader matek_h743-slim_bootloader modalai_fc-v2_bootloader mro_ctrl-zero-classic_bootloader mro_ctrl-zero-h7_bootloader mro_ctrl-zero-h7-oem_bootloader mro_pixracerpro_bootloader px4_fmu-v6c_bootloader px4_fmu-v6u_bootloader px4_fmu-v6x_bootloader
 	git status

@@ -390,6 +386,8 @@ tests_coverage:
 	@mkdir -p coverage
 	@lcov --directory build/px4_sitl_test --base-directory build/px4_sitl_test --gcov-tool gcov --capture -o coverage/lcov.info

+test_unit:
+	@$(MAKE) tests TESTFILTER="unit\|functional"

 rostest: px4_sitl_default
 	@$(MAKE) --no-print-directory px4_sitl_default sitl_gazebo
@@ -554,14 +552,6 @@ check_px4: $(call make_list,nuttx,"px4") \
 check_nxp: $(call make_list,nuttx,"nxp") \
 	sizes

-# helpers for running olddefconfig (nuttx) and px4_savedefconfig on all boards
-.PHONY: all_oldconfig all_px4_savedefconfig
-all_oldconfig:
-	@for targ in $(ALL_CONFIG_TARGETS); do $(MAKE) $$targ oldconfig; done
-
-all_px4_savedefconfig:
-	@for targ in $(ALL_CONFIG_TARGETS); do $(MAKE) $$targ px4_savedefconfig; done
-
 .PHONY: failsafe_web run_failsafe_web_server
 failsafe_web:
 	@if ! command -v emcc; then echo -e "Install emscripten first: https://emscripten.org/docs/getting_started/downloads.html\nAnd source the env: source <path>/emsdk_env.sh"; exit 1; fi
@@ -31,11 +31,6 @@ then
 	set PARAM_FILE /dev/eeeprom0
 fi

-if mft query -q -k MTD -s MTD_PARAMETERS -v /mnt/qspi/params
-then
-	set PARAM_FILE /mnt/qspi/params
-fi
-
 #
 # Load parameters.
 #
@@ -1,32 +0,0 @@
-#!/bin/sh
-#
-# @name 3DR Iris Quadrotor SITL jMAVSim
-#
-# @type Quadrotor Wide
-#
-# @maintainer Julian Oes <julian@oes.ch>
-#
-
-. ${R}etc/init.d/rc.mc_defaults
-
-param set-default CA_AIRFRAME 0
-
-param set-default CA_ROTOR_COUNT 4
-param set-default CA_ROTOR0_PX 0.1515
-param set-default CA_ROTOR0_PY 0.245
-param set-default CA_ROTOR0_KM 0.05
-param set-default CA_ROTOR1_PX -0.1515
-param set-default CA_ROTOR1_PY -0.1875
-param set-default CA_ROTOR1_KM 0.05
-param set-default CA_ROTOR2_PX 0.1515
-param set-default CA_ROTOR2_PY -0.245
-param set-default CA_ROTOR2_KM -0.05
-param set-default CA_ROTOR3_PX -0.1515
-param set-default CA_ROTOR3_PY 0.1875
-param set-default CA_ROTOR3_KM -0.05
-
-param set-default PWM_MAIN_FUNC1 101
-param set-default PWM_MAIN_FUNC2 102
-param set-default PWM_MAIN_FUNC3 103
-param set-default PWM_MAIN_FUNC4 104
-
@@ -1,33 +0,0 @@
-#!/bin/sh
-#
-# @name 3DR Iris Quadrotor SITL (foggy_lidar)
-#
-# @type Quadrotor Wide
-#
-
-. ${R}etc/init.d/rc.mc_defaults
-
-
-param set-default CA_AIRFRAME 0
-
-param set-default CA_ROTOR_COUNT 4
-param set-default CA_ROTOR0_PX 0.1515
-param set-default CA_ROTOR0_PY 0.245
-param set-default CA_ROTOR0_KM 0.05
-param set-default CA_ROTOR1_PX -0.1515
-param set-default CA_ROTOR1_PY -0.1875
-param set-default CA_ROTOR1_KM 0.05
-param set-default CA_ROTOR2_PX 0.1515
-param set-default CA_ROTOR2_PY -0.245
-param set-default CA_ROTOR2_KM -0.05
-param set-default CA_ROTOR3_PX -0.1515
-param set-default CA_ROTOR3_PY 0.1875
-param set-default CA_ROTOR3_KM -0.05
-
-param set-default PWM_MAIN_FUNC1 101
-param set-default PWM_MAIN_FUNC2 102
-param set-default PWM_MAIN_FUNC3 103
-param set-default PWM_MAIN_FUNC4 104
-
-param set-default EKF2_RNG_A_HMAX 10
-
@@ -0,0 +1,11 @@
+#!/bin/sh
+#
+# @name 3DR Iris Quadrotor SITL (foggy_lidar)
+#
+# @type Quadrotor Wide
+#
+
+. ${R}etc/init.d-posix/airframes/10016_iris
+
+param set-default EKF2_RNG_A_HMAX 10
+
@@ -41,3 +41,4 @@ param set-default PWM_MAIN_FUNC3 103
 param set-default PWM_MAIN_FUNC4 104

 param set SIH_VEHICLE_TYPE 0
+
@@ -14,7 +14,7 @@ PX4_SIM_MODEL=${PX4_SIM_MODEL:=xvert}
 param set-default VT_ELEV_MC_LOCK 0
 param set-default VT_TYPE 0
 param set-default VT_FW_DIFTHR_EN 1
-param set-default VT_FW_DIFTHR_S_Y 0.3
+param set-default VT_FW_DIFTHR_SC 0.3
 param set-default MPC_MAN_Y_MAX 60
 param set-default MC_PITCH_P 5

@@ -1,47 +0,0 @@
-#!/bin/sh
-#
-# @name 3DR Iris Quadrotor SITL (Optical Flow)
-#
-# @type Quadrotor Wide
-#
-
-. ${R}etc/init.d/rc.mc_defaults
-
-
-param set-default CA_AIRFRAME 0
-
-param set-default CA_ROTOR_COUNT 4
-param set-default CA_ROTOR0_PX 0.1515
-param set-default CA_ROTOR0_PY 0.245
-param set-default CA_ROTOR0_KM 0.05
-param set-default CA_ROTOR1_PX -0.1515
-param set-default CA_ROTOR1_PY -0.1875
-param set-default CA_ROTOR1_KM 0.05
-param set-default CA_ROTOR2_PX 0.1515
-param set-default CA_ROTOR2_PY -0.245
-param set-default CA_ROTOR2_KM -0.05
-param set-default CA_ROTOR3_PX -0.1515
-param set-default CA_ROTOR3_PY 0.1875
-param set-default CA_ROTOR3_KM -0.05
-
-param set-default PWM_MAIN_FUNC1 101
-param set-default PWM_MAIN_FUNC2 102
-param set-default PWM_MAIN_FUNC3 103
-param set-default PWM_MAIN_FUNC4 104
-
-# EKF2
-param set-default EKF2_AID_MASK 2
-param set-default EKF2_GPS_CTRL 0
-param set-default EKF2_EVP_NOISE 0.05
-param set-default EKF2_EVA_NOISE 0.05
-
-# LPE: Flow-only mode
-param set-default LPE_FUSION 242
-param set-default LPE_FAKE_ORIGIN 1
-
-param set-default MPC_ALT_MODE 2
-
-param set-default SENS_FLOW_ROT 6
-param set-default SENS_FLOW_MINHGT 0.7
-param set-default SENS_FLOW_MAXHGT 3.0
-param set-default SENS_FLOW_MAXR 2.5
@@ -0,0 +1,25 @@
+#!/bin/sh
+#
+# @name 3DR Iris Quadrotor SITL (Optical Flow)
+#
+# @type Quadrotor Wide
+#
+
+. ${R}etc/init.d-posix/airframes/10016_iris
+
+# EKF2
+param set-default EKF2_AID_MASK 2
+param set-default EKF2_GPS_CTRL 0
+param set-default EKF2_EVP_NOISE 0.05
+param set-default EKF2_EVA_NOISE 0.05
+
+# LPE: Flow-only mode
+param set-default LPE_FUSION 242
+param set-default LPE_FAKE_ORIGIN 1
+
+param set-default MPC_ALT_MODE 2
+
+param set-default SENS_FLOW_ROT 6
+param set-default SENS_FLOW_MINHGT 0.7
+param set-default SENS_FLOW_MAXHGT 3.0
+param set-default SENS_FLOW_MAXR 2.5
@@ -1,38 +0,0 @@
-#!/bin/sh
-#
-# @name 3DR Iris Quadrotor SITL (irlock)
-#
-# @type Quadrotor Wide
-#
-
-. ${R}etc/init.d/rc.mc_defaults
-
-
-param set-default CA_AIRFRAME 0
-
-param set-default CA_ROTOR_COUNT 4
-param set-default CA_ROTOR0_PX 0.1515
-param set-default CA_ROTOR0_PY 0.245
-param set-default CA_ROTOR0_KM 0.05
-param set-default CA_ROTOR1_PX -0.1515
-param set-default CA_ROTOR1_PY -0.1875
-param set-default CA_ROTOR1_KM 0.05
-param set-default CA_ROTOR2_PX 0.1515
-param set-default CA_ROTOR2_PY -0.245
-param set-default CA_ROTOR2_KM -0.05
-param set-default CA_ROTOR3_PX -0.1515
-param set-default CA_ROTOR3_PY 0.1875
-param set-default CA_ROTOR3_KM -0.05
-
-param set-default PWM_MAIN_FUNC1 101
-param set-default PWM_MAIN_FUNC2 102
-param set-default PWM_MAIN_FUNC3 103
-param set-default PWM_MAIN_FUNC4 104
-
-# enable fusion of landing target velocity
-param set-default LTEST_MODE 1
-param set-default PLD_HACC_RAD 0.1
-param set-default RTL_PLD_MD 2
-
-# Start up Landing Target Estimator module
-landing_target_estimator start
@@ -0,0 +1,16 @@
+#!/bin/sh
+#
+# @name 3DR Iris Quadrotor SITL (irlock)
+#
+# @type Quadrotor Wide
+#
+
+. ${R}etc/init.d-posix/airframes/10016_iris
+
+# enable fusion of landing target velocity
+param set-default LTEST_MODE 1
+param set-default PLD_HACC_RAD 0.1
+param set-default RTL_PLD_MD 2
+
+# Start up Landing Target Estimator module
+landing_target_estimator start
@@ -1,33 +0,0 @@
-#!/bin/sh
-#
-# @name 3DR Iris Quadrotor SITL (rplidar)
-#
-# @type Quadrotor Wide
-#
-
-. ${R}etc/init.d/rc.mc_defaults
-
-
-param set-default CA_AIRFRAME 0
-
-param set-default CA_ROTOR_COUNT 4
-param set-default CA_ROTOR0_PX 0.1515
-param set-default CA_ROTOR0_PY 0.245
-param set-default CA_ROTOR0_KM 0.05
-param set-default CA_ROTOR1_PX -0.1515
-param set-default CA_ROTOR1_PY -0.1875
-param set-default CA_ROTOR1_KM 0.05
-param set-default CA_ROTOR2_PX 0.1515
-param set-default CA_ROTOR2_PY -0.245
-param set-default CA_ROTOR2_KM -0.05
-param set-default CA_ROTOR3_PX -0.1515
-param set-default CA_ROTOR3_PY 0.1875
-param set-default CA_ROTOR3_KM -0.05
-
-param set-default PWM_MAIN_FUNC1 101
-param set-default PWM_MAIN_FUNC2 102
-param set-default PWM_MAIN_FUNC3 103
-param set-default PWM_MAIN_FUNC4 104
-
-param set-default LPE_FUSION 242
-
@@ -0,0 +1,11 @@
+#!/bin/sh
+#
+# @name 3DR Iris Quadrotor SITL (rplidar)
+#
+# @type Quadrotor Wide
+#
+
+. ${R}etc/init.d-posix/airframes/10016_iris
+
+param set-default LPE_FUSION 242
+
@@ -10,7 +10,6 @@
 # EKF2: Vision position and heading
 param set-default EKF2_AID_MASK 24
 param set-default EKF2_EV_DELAY 5
-param set-default EKF2_EV_CTRL 15
 param set-default EKF2_GPS_CTRL 0

 # LPE: Vision + baro
@@ -1,34 +0,0 @@
-#!/bin/sh
-#
-# @name 3DR Iris Quadrotor SITL (Obstacle Avoidance)
-#
-# @type Quadrotor Wide
-#
-
-. ${R}etc/init.d/rc.mc_defaults
-
-
-param set-default CA_AIRFRAME 0
-
-param set-default CA_ROTOR_COUNT 4
-param set-default CA_ROTOR0_PX 0.1515
-param set-default CA_ROTOR0_PY 0.245
-param set-default CA_ROTOR0_KM 0.05
-param set-default CA_ROTOR1_PX -0.1515
-param set-default CA_ROTOR1_PY -0.1875
-param set-default CA_ROTOR1_KM 0.05
-param set-default CA_ROTOR2_PX 0.1515
-param set-default CA_ROTOR2_PY -0.245
-param set-default CA_ROTOR2_KM -0.05
-param set-default CA_ROTOR3_PX -0.1515
-param set-default CA_ROTOR3_PY 0.1875
-param set-default CA_ROTOR3_KM -0.05
-
-param set-default PWM_MAIN_FUNC1 101
-param set-default PWM_MAIN_FUNC2 102
-param set-default PWM_MAIN_FUNC3 103
-param set-default PWM_MAIN_FUNC4 104
-
-param set-default COM_OBS_AVOID 1
-param set-default MPC_XY_CRUISE 5.0
-
@@ -0,0 +1,12 @@
+#!/bin/sh
+#
+# @name 3DR Iris Quadrotor SITL (Obstacle Avoidance)
+#
+# @type Quadrotor Wide
+#
+
+. ${R}etc/init.d-posix/airframes/10016_iris
+
+param set-default COM_OBS_AVOID 1
+param set-default MPC_XY_CRUISE 5.0
+
@@ -1,40 +0,0 @@
-#!/bin/sh
-#
-# @name 3DR Iris Quadrotor SITL (Optical Flow)
-#
-# @type Quadrotor Wide
-#
-
-. ${R}etc/init.d/rc.mc_defaults
-
-
-param set-default CA_AIRFRAME 0
-
-param set-default CA_ROTOR_COUNT 4
-param set-default CA_ROTOR0_PX 0.1515
-param set-default CA_ROTOR0_PY 0.245
-param set-default CA_ROTOR0_KM 0.05
-param set-default CA_ROTOR1_PX -0.1515
-param set-default CA_ROTOR1_PY -0.1875
-param set-default CA_ROTOR1_KM 0.05
-param set-default CA_ROTOR2_PX 0.1515
-param set-default CA_ROTOR2_PY -0.245
-param set-default CA_ROTOR2_KM -0.05
-param set-default CA_ROTOR3_PX -0.1515
-param set-default CA_ROTOR3_PY 0.1875
-param set-default CA_ROTOR3_KM -0.05
-
-param set-default PWM_MAIN_FUNC1 101
-param set-default PWM_MAIN_FUNC2 102
-param set-default PWM_MAIN_FUNC3 103
-param set-default PWM_MAIN_FUNC4 104
-
-# EKF2
-param set-default EKF2_AID_MASK 2
-param set-default EKF2_GPS_CTRL 0
-
-# LPE: Flow-only mode
-param set-default LPE_FUSION 242
-param set-default LPE_FAKE_ORIGIN 1
-
-param set-default MPC_ALT_MODE 2
@@ -0,0 +1,18 @@
+#!/bin/sh
+#
+# @name 3DR Iris Quadrotor SITL (Optical Flow)
+#
+# @type Quadrotor Wide
+#
+
+. ${R}etc/init.d-posix/airframes/10016_iris
+
+# EKF2
+param set-default EKF2_AID_MASK 2
+param set-default EKF2_GPS_CTRL 0
+
+# LPE: Flow-only mode
+param set-default LPE_FUSION 242
+param set-default LPE_FAKE_ORIGIN 1
+
+param set-default MPC_ALT_MODE 2
@@ -0,0 +1,13 @@
+#!/bin/sh
+#
+# @name 3DR Iris Quadrotor SITL (Vision Velocity)
+#
+# @type Quadrotor Wide
+#
+
+. ${R}etc/init.d-posix/airframes/10016_iris
+
+# EKF2: Vision velocity and heading
+param set-default EKF2_AID_MASK 272
+param set-default EKF2_EV_DELAY 5
+param set-default EKF2_GPS_CTRL 0
@@ -1,33 +0,0 @@
-#!/bin/sh
-#
-# @name 3DR Iris Quadrotor SITL (Dual GPS)
-#
-# @type Quadrotor Wide
-#
-
-. ${R}etc/init.d/rc.mc_defaults
-
-
-param set-default CA_AIRFRAME 0
-
-param set-default CA_ROTOR_COUNT 4
-param set-default CA_ROTOR0_PX 0.1515
-param set-default CA_ROTOR0_PY 0.245
-param set-default CA_ROTOR0_KM 0.05
-param set-default CA_ROTOR1_PX -0.1515
-param set-default CA_ROTOR1_PY -0.1875
-param set-default CA_ROTOR1_KM 0.05
-param set-default CA_ROTOR2_PX 0.1515
-param set-default CA_ROTOR2_PY -0.245
-param set-default CA_ROTOR2_KM -0.05
-param set-default CA_ROTOR3_PX -0.1515
-param set-default CA_ROTOR3_PY 0.1875
-param set-default CA_ROTOR3_KM -0.05
-
-param set-default PWM_MAIN_FUNC1 101
-param set-default PWM_MAIN_FUNC2 102
-param set-default PWM_MAIN_FUNC3 103
-param set-default PWM_MAIN_FUNC4 104
-
-# EKF2: Multi GPS blending
-param set-default SENS_GPS_MASK 7
@@ -0,0 +1,11 @@
+#!/bin/sh
+#
+# @name 3DR Iris Quadrotor SITL (Dual GPS)
+#
+# @type Quadrotor Wide
+#
+
+. ${R}etc/init.d-posix/airframes/10016_iris
+
+# EKF2: Multi GPS blending
+param set-default SENS_GPS_MASK 7
@@ -1,75 +0,0 @@
-#!/bin/sh
-#
-# @name Plane SITL
-#
-
-. ${R}etc/init.d/rc.fw_defaults
-
-param set-default EKF2_MAG_ACCLIM 0
-param set-default EKF2_MAG_YAWLIM 0
-
-param set-default FW_LND_ANG 8
-
-param set-default FW_L1_PERIOD 12
-
-param set-default FW_PR_P 0.9
-param set-default FW_PR_FF 0.5
-param set-default FW_PR_I 0.5
-param set-default TRIM_PITCH -0.15
-
-param set-default FW_PSP_OFF 2
-param set-default FW_P_LIM_MIN -15
-
-param set-default FW_RR_FF 0.5
-param set-default FW_RR_P 0.3
-param set-default FW_RR_I 0.5
-
-param set-default FW_YR_FF 0.5
-param set-default FW_YR_P 0.6
-param set-default FW_YR_I 0.5
-
-param set-default FW_SPOILERS_LND 0.4
-
-param set-default FW_THR_MAX 0.6
-param set-default FW_THR_MIN 0.05
-param set-default FW_THR_TRIM 0.25
-
-param set-default FW_T_CLMB_MAX 8
-param set-default FW_T_SINK_MAX 2.7
-param set-default FW_T_SINK_MIN 2.2
-
-param set-default FW_W_EN 1
-
-param set-default MIS_TAKEOFF_ALT 30
-
-param set-default NAV_ACC_RAD 15
-param set-default NAV_DLL_ACT 2
-
-param set-default RWTO_TKOFF 1
-
-param set-default CA_AIRFRAME 1
-
-param set-default CA_ROTOR_COUNT 1
-param set-default CA_ROTOR0_PX 0.3
-
-param set-default CA_SV_CS_COUNT 6
-param set-default CA_SV_CS0_TRQ_R -0.5
-param set-default CA_SV_CS0_TYPE 1
-param set-default CA_SV_CS1_TRQ_R 0.5
-param set-default CA_SV_CS1_TYPE 2
-param set-default CA_SV_CS2_TRQ_P 1.0
-param set-default CA_SV_CS2_TYPE 3
-param set-default CA_SV_CS3_TRQ_Y 1.0
-param set-default CA_SV_CS3_TYPE 4
-param set-default CA_SV_CS4_TYPE 9
-param set-default CA_SV_CS5_TYPE 10
-param set-default PWM_MAIN_FUNC3 204
-param set-default PWM_MAIN_FUNC4 205
-param set-default PWM_MAIN_FUNC5 101
-param set-default PWM_MAIN_FUNC6 201
-param set-default PWM_MAIN_FUNC7 202
-param set-default PWM_MAIN_FUNC8 203
-param set-default PWM_MAIN_FUNC9 206
-param set-default PWM_MAIN_REV 256
-
-
@@ -1,6 +1,6 @@
 #!/bin/sh
 #
-# @name Plane SITL with catapult
+# @name Plane SITL
 #

 . ${R}etc/init.d/rc.fw_defaults
@@ -74,5 +74,4 @@ param set-default PWM_MAIN_FUNC8 203
 param set-default PWM_MAIN_FUNC9 206
 param set-default PWM_MAIN_REV 256

-param set-default RWTO_TKOFF 0

@@ -1,81 +0,0 @@
-#!/bin/sh
-#
-# @name Plane SITL with camera
-#
-
-. ${R}etc/init.d/rc.fw_defaults
-
-param set-default EKF2_MAG_ACCLIM 0
-param set-default EKF2_MAG_YAWLIM 0
-
-param set-default FW_LND_AIRSPD_SC 1
-param set-default FW_LND_ANG 8
-
-param set-default FW_L1_PERIOD 12
-
-param set-default FW_PR_P 0.9
-param set-default FW_PR_FF 0.5
-param set-default FW_PR_I 0.5
-param set-default TRIM_PITCH -0.15
-
-param set-default FW_PSP_OFF 2
-param set-default FW_P_LIM_MIN -15
-
-param set-default FW_RR_FF 0.5
-param set-default FW_RR_P 0.3
-param set-default FW_RR_I 0.5
-
-param set-default FW_YR_FF 0.5
-param set-default FW_YR_P 0.6
-param set-default FW_YR_I 0.5
-
-param set-default FW_SPOILERS_LND 0.4
-
-param set-default FW_THR_MAX 0.6
-param set-default FW_THR_MIN 0.05
-param set-default FW_THR_TRIM 0.25
-
-param set-default FW_T_CLMB_MAX 8
-param set-default FW_T_SINK_MAX 2.7
-param set-default FW_T_SINK_MIN 2.2
-
-param set-default FW_W_EN 1
-
-param set-default MIS_LTRMIN_ALT 30
-param set-default MIS_TAKEOFF_ALT 30
-
-param set-default NAV_ACC_RAD 15
-param set-default NAV_DLL_ACT 2
-
-param set-default RWTO_TKOFF 1
-
-param set-default CA_AIRFRAME 1
-
-param set-default CA_ROTOR_COUNT 1
-param set-default CA_ROTOR0_PX 0.3
-
-param set-default CA_SV_CS_COUNT 6
-param set-default CA_SV_CS0_TRQ_R -0.5
-param set-default CA_SV_CS0_TYPE 1
-param set-default CA_SV_CS1_TRQ_R 0.5
-param set-default CA_SV_CS1_TYPE 2
-param set-default CA_SV_CS2_TRQ_P 1.0
-param set-default CA_SV_CS2_TYPE 3
-param set-default CA_SV_CS3_TRQ_Y 1.0
-param set-default CA_SV_CS3_TYPE 4
-param set-default CA_SV_CS4_TYPE 9
-param set-default CA_SV_CS5_TYPE 10
-param set-default PWM_MAIN_FUNC3 204
-param set-default PWM_MAIN_FUNC4 205
-param set-default PWM_MAIN_FUNC5 101
-param set-default PWM_MAIN_FUNC6 201
-param set-default PWM_MAIN_FUNC7 202
-param set-default PWM_MAIN_FUNC8 203
-param set-default PWM_MAIN_FUNC9 206
-param set-default PWM_MAIN_REV 256
-
-# Camera trigger interface is MAVLink
-param set-default TRIG_INTERFACE 3
-
-# Distance trigger mode enabled
-param set-default TRIG_MODE 4
@@ -0,0 +1,12 @@
+#!/bin/sh
+#
+# @name Plane SITL with camera
+#
+
+. ${R}etc/init.d-posix/airframes/1030_plane
+
+# Camera trigger interface is MAVLink
+param set-default TRIG_INTERFACE 3
+
+# Distance trigger mode enabled
+param set-default TRIG_MODE 4
@@ -0,0 +1,9 @@
+#!/bin/sh
+#
+# @name Plane SITL with catapult
+#
+
+. ${R}etc/init.d-posix/airframes/1030_plane
+
+param set-default RWTO_TKOFF 0
+
@@ -63,3 +63,4 @@ param set-default PWM_MAIN_FUNC7 202
 param set-default PWM_MAIN_FUNC8 203
 param set-default PWM_MAIN_FUNC9 206
 param set-default PWM_MAIN_REV 256
+
@@ -1,59 +0,0 @@
-#!/bin/sh
-#
-# @name Plane SITL
-#
-
-. ${R}etc/init.d/rc.fw_defaults
-
-param set-default FW_LND_ANG 5
-param set-default FW_LND_FL_PMIN 9.5
-param set-default FW_LND_FL_PMAX 20
-param set-default FW_LND_FLALT 5
-
-param set-default FW_L1_PERIOD 25
-
-param set-default FW_PR_FF 0.40
-param set-default FW_PR_I 0.05
-param set-default FW_PR_P 0.05
-
-param set-default FW_R_TC 0.45
-param set-default FW_RR_FF 0.40
-param set-default FW_RR_I 0.132
-param set-default FW_RR_P 0.085
-
-param set-default FW_W_EN 1
-
-param set-default MIS_TAKEOFF_ALT 20
-param set-default MIS_DIST_1WP 2500
-param set-default MIS_DIST_WPS 10000
-
-param set-default NAV_ACC_RAD 15
-param set-default NAV_DLL_ACT 2
-
-param set-default RWTO_TKOFF 1
-param set-default RWTO_PSP 8
-
-param set-default CA_AIRFRAME 1
-
-param set-default CA_ROTOR_COUNT 1
-param set-default CA_ROTOR0_PX 0.3
-
-param set-default CA_SV_CS_COUNT 6
-param set-default CA_SV_CS0_TRQ_R -0.5
-param set-default CA_SV_CS0_TYPE 1
-param set-default CA_SV_CS1_TRQ_R 0.5
-param set-default CA_SV_CS1_TYPE 2
-param set-default CA_SV_CS2_TRQ_P 1.0
-param set-default CA_SV_CS2_TYPE 3
-param set-default CA_SV_CS3_TRQ_Y 1.0
-param set-default CA_SV_CS3_TYPE 4
-param set-default CA_SV_CS4_TYPE 9
-param set-default CA_SV_CS5_TYPE 10
-param set-default PWM_MAIN_FUNC3 204
-param set-default PWM_MAIN_FUNC4 205
-param set-default PWM_MAIN_FUNC5 101
-param set-default PWM_MAIN_FUNC6 201
-param set-default PWM_MAIN_FUNC7 202
-param set-default PWM_MAIN_FUNC8 203
-param set-default PWM_MAIN_FUNC9 206
-param set-default PWM_MAIN_REV 256
@@ -5,6 +5,7 @@

 . ${R}etc/init.d/rc.fw_defaults

+param set-default FW_LND_AIRSPD_SC 1.1
 param set-default FW_LND_ANG 5
 param set-default FW_LND_FL_PMIN 9.5
 param set-default FW_LND_FL_PMAX 20
@@ -23,6 +24,7 @@ param set-default FW_RR_P 0.085

 param set-default FW_W_EN 1

+param set-default MIS_LTRMIN_ALT 30
 param set-default MIS_TAKEOFF_ALT 20
 param set-default MIS_DIST_1WP 2500
 param set-default MIS_DIST_WPS 10000
@@ -31,7 +33,11 @@ param set-default NAV_ACC_RAD 15
 param set-default NAV_DLL_ACT 2

 param set-default RWTO_TKOFF 1
+
+param set-default RWTO_MAX_PITCH 20
+
 param set-default RWTO_PSP 8
+param set-default RWTO_AIRSPD_SCL 1.8

 param set-default CA_AIRFRAME 1

@@ -8,6 +8,7 @@
 param set-default EKF2_MAG_ACCLIM 0
 param set-default EKF2_MAG_YAWLIM 0

+param set-default FW_LND_AIRSPD_SC 1
 param set-default FW_LND_ANG 8

 param set-default FW_L1_PERIOD 15
@@ -26,6 +27,7 @@ param set-default FW_L1_PERIOD 12

 param set-default FW_W_EN 1

+param set-default MIS_LTRMIN_ALT 30
 param set-default MIS_TAKEOFF_ALT 30

 param set-default NAV_ACC_RAD 15
@@ -5,6 +5,7 @@

 . ${R}etc/init.d/rc.fw_defaults

+param set-default FW_LND_AIRSPD_SC 1.1
 param set-default FW_LND_ANG 5
 param set-default FW_LND_FL_PMIN 9.5
 param set-default FW_LND_FL_PMAX 20
@@ -23,6 +24,7 @@ param set-default FW_RR_P 0.085

 param set-default FW_W_EN 1

+param set-default MIS_LTRMIN_ALT 30
 param set-default MIS_TAKEOFF_ALT 20
 param set-default MIS_DIST_1WP 2500
 param set-default MIS_DIST_WPS 10000
@@ -31,7 +33,9 @@ param set-default NAV_ACC_RAD 15
 param set-default NAV_DLL_ACT 2

 param set-default RWTO_TKOFF 1
+param set-default RWTO_MAX_PITCH 20
 param set-default RWTO_PSP 8
+param set-default RWTO_AIRSPD_SCL 1.8

 param set-default CA_AIRFRAME 1

@@ -8,6 +8,7 @@
 param set-default EKF2_MAG_ACCLIM 0
 param set-default EKF2_MAG_YAWLIM 0

+param set-default FW_LND_AIRSPD_SC 1
 param set-default FW_LND_ANG 8

 param set-default FW_L1_PERIOD 12
@@ -33,11 +34,14 @@ param set-default FW_T_TAS_TC 2

 param set-default FW_W_EN 1

+param set-default MIS_LTRMIN_ALT 30
 param set-default MIS_TAKEOFF_ALT 30

 param set-default NAV_ACC_RAD 15
 param set-default NAV_DLL_ACT 2

+param set-default FW_USE_NPFG 1
+
 param set-default RWTO_TKOFF 1

 param set-default CA_AIRFRAME 1
@@ -1,78 +0,0 @@
-#!/bin/sh
-#
-# @name Plane SITL with catapult
-#
-
-. ${R}etc/init.d/rc.fw_defaults
-
-param set-default EKF2_MAG_ACCLIM 0
-param set-default EKF2_MAG_YAWLIM 0
-
-param set-default FW_LND_AIRSPD_SC 1
-param set-default FW_LND_ANG 8
-
-param set-default FW_L1_PERIOD 12
-
-param set-default FW_PR_P 0.9
-param set-default FW_PR_FF 0.5
-param set-default FW_PR_I 0.5
-param set-default TRIM_PITCH -0.15
-
-param set-default FW_PSP_OFF 2
-param set-default FW_P_LIM_MIN -15
-
-param set-default FW_RR_FF 0.5
-param set-default FW_RR_P 0.3
-param set-default FW_RR_I 0.5
-
-param set-default FW_YR_FF 0.5
-param set-default FW_YR_P 0.6
-param set-default FW_YR_I 0.5
-
-param set-default FW_SPOILERS_LND 0.4
-
-param set-default FW_THR_MAX 0.6
-param set-default FW_THR_MIN 0.05
-param set-default FW_THR_TRIM 0.25
-
-param set-default FW_T_CLMB_MAX 8
-param set-default FW_T_SINK_MAX 2.7
-param set-default FW_T_SINK_MIN 2.2
-
-param set-default FW_W_EN 1
-
-param set-default MIS_LTRMIN_ALT 30
-param set-default MIS_TAKEOFF_ALT 30
-
-param set-default NAV_ACC_RAD 15
-param set-default NAV_DLL_ACT 2
-
-param set-default RWTO_TKOFF 1
-
-param set-default CA_AIRFRAME 1
-
-param set-default CA_ROTOR_COUNT 1
-param set-default CA_ROTOR0_PX 0.3
-
-param set-default CA_SV_CS_COUNT 6
-param set-default CA_SV_CS0_TRQ_R -0.5
-param set-default CA_SV_CS0_TYPE 1
-param set-default CA_SV_CS1_TRQ_R 0.5
-param set-default CA_SV_CS1_TYPE 2
-param set-default CA_SV_CS2_TRQ_P 1.0
-param set-default CA_SV_CS2_TYPE 3
-param set-default CA_SV_CS3_TRQ_Y 1.0
-param set-default CA_SV_CS3_TYPE 4
-param set-default CA_SV_CS4_TYPE 9
-param set-default CA_SV_CS5_TYPE 10
-param set-default PWM_MAIN_FUNC3 204
-param set-default PWM_MAIN_FUNC4 205
-param set-default PWM_MAIN_FUNC5 101
-param set-default PWM_MAIN_FUNC6 201
-param set-default PWM_MAIN_FUNC7 202
-param set-default PWM_MAIN_FUNC8 203
-param set-default PWM_MAIN_FUNC9 206
-param set-default PWM_MAIN_REV 256
-
-param set-default FW_THR_TRIM 0.0
-param set-default RWTO_TKOFF 0
@@ -0,0 +1,9 @@
+#!/bin/sh
+#
+# @name Plane SITL with catapult
+#
+
+. ${R}etc/init.d-posix/airframes/1030_plane
+
+param set-default FW_THR_TRIM 0.0
+param set-default RWTO_TKOFF 0
@@ -8,6 +8,7 @@
 param set-default EKF2_MAG_ACCLIM 0
 param set-default EKF2_MAG_YAWLIM 0

+param set-default FW_LND_AIRSPD_SC 1
 param set-default FW_LND_ANG 8
 param set-default FW_THR_LND_MAX 0

@@ -30,6 +31,7 @@ param set-default FW_T_SINK_MIN 2.2

 param set-default FW_W_EN 1

+param set-default MIS_LTRMIN_ALT 30
 param set-default MIS_TAKEOFF_ALT 30

 param set-default NAV_ACC_RAD 15
@@ -70,7 +70,7 @@ param set-default MPC_XY_VEL_D_ACC 0.1
 param set-default NAV_ACC_RAD 5

 param set-default VT_FW_DIFTHR_EN 1
-param set-default VT_FW_DIFTHR_S_Y 0.5
+param set-default VT_FW_DIFTHR_SC 0.5
 param set-default VT_F_TRANS_DUR 1.5
 param set-default VT_F_TRANS_THR 0.7
 param set-default VT_TYPE 0
@@ -1,93 +0,0 @@
-#!/bin/sh
-#
-# @name Standard VTOL
-#
-# @type Standard VTOL
-#
-
-. ${R}etc/init.d/rc.vtol_defaults
-
-# TODO: Enable motor failure detection when the
-# VTOL no longer reports 0A for all ESCs in SITL
-param set-default FD_ACT_EN 0
-param set-default FD_ACT_MOT_TOUT 500
-
-param set-default CA_AIRFRAME 2
-
-param set-default CA_ROTOR_COUNT 5
-param set-default CA_ROTOR0_PX 0.1515
-param set-default CA_ROTOR0_PY 0.245
-param set-default CA_ROTOR0_KM 0.05
-param set-default CA_ROTOR1_PX -0.1515
-param set-default CA_ROTOR1_PY -0.1875
-param set-default CA_ROTOR1_KM 0.05
-param set-default CA_ROTOR2_PX 0.1515
-param set-default CA_ROTOR2_PY -0.245
-param set-default CA_ROTOR2_KM -0.05
-param set-default CA_ROTOR3_PX -0.1515
-param set-default CA_ROTOR3_PY 0.1875
-param set-default CA_ROTOR3_KM -0.05
-param set-default CA_ROTOR4_AX 1.0
-param set-default CA_ROTOR4_AZ 0.0
-param set-default CA_ROTOR4_PX 0.2
-
-param set-default CA_SV_CS_COUNT 3
-param set-default CA_SV_CS0_TYPE 1
-param set-default CA_SV_CS0_TRQ_R -0.5
-param set-default CA_SV_CS1_TYPE 2
-param set-default CA_SV_CS1_TRQ_R 0.5
-param set-default CA_SV_CS2_TYPE 3
-param set-default CA_SV_CS2_TRQ_P 1.0
-param set-default PWM_MAIN_FUNC1 101
-param set-default PWM_MAIN_FUNC2 102
-param set-default PWM_MAIN_FUNC3 103
-param set-default PWM_MAIN_FUNC4 104
-param set-default PWM_MAIN_FUNC5 105
-param set-default PWM_MAIN_FUNC6 201
-param set-default PWM_MAIN_FUNC7 202
-param set-default PWM_MAIN_FUNC8 203
-
-param set-default FW_L1_PERIOD 12
-param set-default FW_PR_FF 0.2
-param set-default FW_PR_P 0.9
-param set-default FW_PSP_OFF 2
-param set-default FW_P_LIM_MIN -15
-param set-default FW_RR_FF 0.1
-param set-default FW_RR_P 0.3
-param set-default FW_THR_TRIM 0.25
-param set-default FW_THR_MAX 0.6
-param set-default FW_THR_MIN 0.05
-param set-default FW_T_CLMB_MAX 8
-param set-default FW_T_SINK_MAX 2.7
-param set-default FW_T_SINK_MIN 2.2
-
-param set-default MC_ROLLRATE_P 0.3
-param set-default MC_YAW_P 1.6
-
-param set-default MIS_TAKEOFF_ALT 10
-
-param set-default MPC_ACC_HOR_MAX 2
-param set-default MPC_XY_P 0.8
-param set-default MPC_XY_VEL_P_ACC 3
-param set-default MPC_XY_VEL_I_ACC 4
-param set-default MPC_XY_VEL_D_ACC 0.1
-
-param set-default NAV_ACC_RAD 5
-
-param set-default VT_FWD_THRUST_EN 4
-param set-default VT_F_TRANS_THR 0.75
-param set-default VT_MOT_ID 1234
-param set-default VT_FW_MOT_OFFID 1234
-param set-default VT_B_TRANS_DUR 8
-param set-default VT_TYPE 2
-
-
-# Gimbal
-param set-default PWM_MAIN_FUNC9 420
-param set-default PWM_MAIN_FUNC10 421
-param set-default PWM_MAIN_FUNC11 422
-
-param set-default RC_MAP_AUX1 8
-param set-default RC_MAP_AUX2 9
-param set-default RC_MAP_AUX3 10
-
@@ -0,0 +1,18 @@
+#!/bin/sh
+#
+# @name Standard VTOL
+#
+# @type Standard VTOL
+#
+
+. ${R}etc/init.d-posix/airframes/1040_standard_vtol
+
+# Gimbal
+param set-default PWM_MAIN_FUNC9 420
+param set-default PWM_MAIN_FUNC10 421
+param set-default PWM_MAIN_FUNC11 422
+
+param set-default RC_MAP_AUX1 8
+param set-default RC_MAP_AUX2 9
+param set-default RC_MAP_AUX3 10
+
@@ -1,78 +0,0 @@
-#!/bin/sh
-#
-# @name Plane SITL with downward facing LIDAR.
-#
-
-. ${R}etc/init.d/rc.fw_defaults
-
-param set-default EKF2_MAG_ACCLIM 0
-param set-default EKF2_MAG_YAWLIM 0
-
-param set-default FW_LND_AIRSPD_SC 1
-param set-default FW_LND_ANG 8
-
-param set-default FW_L1_PERIOD 12
-
-param set-default FW_PR_P 0.9
-param set-default FW_PR_FF 0.5
-param set-default FW_PR_I 0.5
-param set-default TRIM_PITCH -0.15
-
-param set-default FW_PSP_OFF 2
-param set-default FW_P_LIM_MIN -15
-
-param set-default FW_RR_FF 0.5
-param set-default FW_RR_P 0.3
-param set-default FW_RR_I 0.5
-
-param set-default FW_YR_FF 0.5
-param set-default FW_YR_P 0.6
-param set-default FW_YR_I 0.5
-
-param set-default FW_SPOILERS_LND 0.4
-
-param set-default FW_THR_MAX 0.6
-param set-default FW_THR_MIN 0.05
-param set-default FW_THR_TRIM 0.25
-
-param set-default FW_T_CLMB_MAX 8
-param set-default FW_T_SINK_MAX 2.7
-param set-default FW_T_SINK_MIN 2.2
-
-param set-default FW_W_EN 1
-
-param set-default MIS_LTRMIN_ALT 30
-param set-default MIS_TAKEOFF_ALT 30
-
-param set-default NAV_ACC_RAD 15
-param set-default NAV_DLL_ACT 2
-
-param set-default RWTO_TKOFF 1
-
-param set-default CA_AIRFRAME 1
-
-param set-default CA_ROTOR_COUNT 1
-param set-default CA_ROTOR0_PX 0.3
-
-param set-default CA_SV_CS_COUNT 6
-param set-default CA_SV_CS0_TRQ_R -0.5
-param set-default CA_SV_CS0_TYPE 1
-param set-default CA_SV_CS1_TRQ_R 0.5
-param set-default CA_SV_CS1_TYPE 2
-param set-default CA_SV_CS2_TRQ_P 1.0
-param set-default CA_SV_CS2_TYPE 3
-param set-default CA_SV_CS3_TRQ_Y 1.0
-param set-default CA_SV_CS3_TYPE 4
-param set-default CA_SV_CS4_TYPE 9
-param set-default CA_SV_CS5_TYPE 10
-param set-default PWM_MAIN_FUNC3 204
-param set-default PWM_MAIN_FUNC4 205
-param set-default PWM_MAIN_FUNC5 101
-param set-default PWM_MAIN_FUNC6 201
-param set-default PWM_MAIN_FUNC7 202
-param set-default PWM_MAIN_FUNC8 203
-param set-default PWM_MAIN_FUNC9 206
-param set-default PWM_MAIN_REV 256
-
-
-param set-default FW_LND_USETER 1
@@ -0,0 +1,9 @@
+#!/bin/sh
+#
+# @name Plane SITL with downward facing LIDAR.
+#
+
+. ${R}etc/init.d-posix/airframes/1030_plane
+
+param set-default FW_LND_USETER 1
+
@@ -18,6 +18,7 @@ param set-default GND_THR_CRUISE 0.3
 param set-default GND_THR_MAX 0.5
 param set-default GND_THR_MIN 0

+param set-default MIS_LTRMIN_ALT 0.01
 param set-default MIS_TAKEOFF_ALT 0.01
 param set-default NAV_ACC_RAD 0.5
 param set-default NAV_LOITER_RAD 2
@@ -18,6 +18,7 @@ param set-default GND_THR_CRUISE 0.3
 param set-default GND_THR_MAX 0.5
 param set-default GND_THR_MIN 0

+param set-default MIS_LTRMIN_ALT 0.01
 param set-default MIS_TAKEOFF_ALT 0.01
 param set-default NAV_ACC_RAD 0.5
 param set-default NAV_LOITER_RAD 2
@@ -25,6 +25,7 @@ param set-default GND_THR_CRUISE 0.3
 param set-default GND_THR_MAX 0.5
 param set-default GND_THR_MIN 0

+param set-default MIS_LTRMIN_ALT 0.01
 param set-default MIS_TAKEOFF_ALT 0.01
 param set-default NAV_ACC_RAD 0.5
 param set-default NAV_LOITER_RAD 2
@@ -18,6 +18,7 @@ param set-default GND_THR_CRUISE 0.85
 param set-default GND_THR_MAX 1
 param set-default GND_THR_MIN 0

+param set-default MIS_LTRMIN_ALT 0.01
 param set-default MIS_TAKEOFF_ALT 0.01
 param set-default NAV_ACC_RAD 0.5
 param set-default NAV_LOITER_RAD 2
@@ -20,6 +20,7 @@ param set-default FW_W_EN 1

 param set-default FW_RR_P 0.08

+param set-default MIS_LTRMIN_ALT 50
 param set-default MIS_TAKEOFF_ALT 3

 param set-default NAV_ACC_RAD 20
@@ -20,6 +20,7 @@ param set-default FW_W_EN 1

 param set-default FW_RR_P 0.08

+param set-default MIS_LTRMIN_ALT 50
 param set-default MIS_TAKEOFF_ALT 7

 param set-default NAV_ACC_RAD 20
@@ -1,48 +0,0 @@
-#!/bin/sh
-#
-# @name Gazebo x500 depth
-#
-# @type Quadrotor
-#
-
-. ${R}etc/init.d/rc.mc_defaults
-
-PX4_SIMULATOR=${PX4_SIMULATOR:=gz}
-PX4_GZ_WORLD=${PX4_GZ_WORLD:=default}
-PX4_SIM_MODEL=${PX4_SIM_MODEL:=x500_depth}
-
-param set-default CA_AIRFRAME 0
-param set-default CA_ROTOR_COUNT 4
-
-param set-default CA_ROTOR0_PX 0.13
-param set-default CA_ROTOR0_PY 0.22
-param set-default CA_ROTOR0_KM  0.05
-
-param set-default CA_ROTOR1_PX -0.13
-param set-default CA_ROTOR1_PY -0.20
-param set-default CA_ROTOR1_KM  0.05
-
-param set-default CA_ROTOR2_PX 0.13
-param set-default CA_ROTOR2_PY -0.22
-param set-default CA_ROTOR2_KM -0.05
-
-param set-default CA_ROTOR3_PX -0.13
-param set-default CA_ROTOR3_PY 0.20
-param set-default CA_ROTOR3_KM -0.05
-
-param set-default SIM_GZ_FUNC1 101
-param set-default SIM_GZ_FUNC2 102
-param set-default SIM_GZ_FUNC3 103
-param set-default SIM_GZ_FUNC4 104
-
-param set-default SIM_GZ_MIN1 150
-param set-default SIM_GZ_MIN2 150
-param set-default SIM_GZ_MIN3 150
-param set-default SIM_GZ_MIN4 150
-
-param set-default SIM_GZ_MAX1 1000
-param set-default SIM_GZ_MAX2 1000
-param set-default SIM_GZ_MAX3 1000
-param set-default SIM_GZ_MAX4 1000
-
-param set-default MPC_THR_HOVER 0.60
@@ -1,6 +1,6 @@
 ############################################################################
 #
-#   Copyright (c) 2020-2023 PX4 Development Team. All rights reserved.
+#   Copyright (c) 2020 PX4 Development Team. All rights reserved.
 #
 # Redistribution and use in source and binary forms, with or without
 # modification, are permitted provided that the following conditions
@@ -32,60 +32,54 @@
 ############################################################################

 px4_add_romfs_files(
+	10016_iris
+	10018_iris_foggy_lidar
+	10019_omnicopter
+	10030_px4vision
+	10040_quadx
+	10041_airplane
+	10042_xvert
+	1010_iris_opt_flow
+	1010_iris_opt_flow.post
+	1011_iris_irlock
+	1012_iris_rplidar
+	1013_iris_vision
+	1013_iris_vision.post
+	1015_iris_obs_avoid
+	1015_iris_obs_avoid.post
+	1017_iris_opt_flow_mockup
+	1018_iris_vision_velocity
+	1019_iris_dual_gps
+	1021_uuv_hippocampus
+	1022_uuv_bluerov2_heavy
+	1030_plane
+	1031_plane_cam
+	1032_plane_catapult
+	1033_rascal
+	1034_rascal-electric
+	1035_techpod
+	1036_malolo
+	1037_believer
+	1038_glider
+	1039_advanced_plane
+	1040_standard_vtol
+	1041_tailsitter
+	1042_tiltrotor
+	1043_standard_vtol_drop
+	1044_plane_lidar
+	1060_rover
+	1061_r1_rover
+	1062_tf-r1
+	1070_boat
+	3010_quadrotor_x
+	3011_hexarotor_x

-	1010_gazebo_iris_opt_flow
-	1010_gazebo_iris_opt_flow.post
-	1011_gazebo_iris_irlock
-	1012_gazebo_iris_rplidar
-	1013_gazebo_iris_vision
-	1013_gazebo_iris_vision.post
-	1015_gazebo_iris_obs_avoid
-	1015_gazebo_iris_obs_avoid.post
-	1017_gazebo_iris_opt_flow_mockup
-	1019_gazebo_iris_dual_gps
-	1021_gazebo_uuv_hippocampus
-	1022_gazebo_uuv_bluerov2_heavy
-	1030_gazebo_plane
-	1031_gazebo_plane_cam
-	1032_gazebo_plane_catapult
-	1033_jsbsim_rascal
-	1034_flightgear_rascal-electric
-	1035_gazebo_techpod
-	1036_jsbsim_malolo
-	1037_gazebo_believer
-	1038_gazebo_glider
-	1039_gazebo_advanced_plane
-	1040_gazebo_standard_vtol
-	1041_gazebo_tailsitter
-	1042_gazebo_tiltrotor
-	1043_gazebo_standard_vtol_drop
-	1044_gazebo_plane_lidar
-	1060_gazebo_rover
-	1061_gazebo_r1_rover
-	1062_flightgear_tf-r1
-	1070_gazebo_boat
+	4001_x500

-	2507_gazebo_cloudship
+	17001_tf-g1
+	17002_tf-g2
+	2507_cloudship

-	3010_jsbsim_quadrotor_x
-	3011_jsbsim_hexarotor_x
-
-	4001_gz_x500
-	4002_gz_x500_depth
-
-	6011_gazebo_typhoon_h480
-	6011_gazebo_typhoon_h480.post
-
-	10016_gazebo_iris
-	10017_jmavsim_iris
-	10018_gazebo_iris_foggy_lidar
-	10019_gazebo_omnicopter
-	10030_gazebo_px4vision
-
-	10040_sihsim_quadx
-	10041_sihsim_airplane
-	10042_sihsim_xvert
-
-	17001_flightgear_tf-g1
-	17002_flightgear_tf-g2
+	6011_typhoon_h480
+	6011_typhoon_h480.post
 )
@@ -3,7 +3,7 @@

 udp_offboard_port_local=$((14580+px4_instance))
 udp_offboard_port_remote=$((14540+px4_instance))
-[ "$px4_instance" -gt 9 ] && udp_offboard_port_remote=14549 # use the same ports for more than 10 instances to avoid port overlaps
+[ $px4_instance -gt 9 ] && udp_offboard_port_remote=14549 # use the same ports for more than 10 instances to avoid port overlaps
 udp_onboard_payload_port_local=$((14280+px4_instance))
 udp_onboard_payload_port_remote=$((14030+px4_instance))
 udp_onboard_gimbal_port_local=$((13030+px4_instance))
@@ -6,8 +6,6 @@ param set-default IMU_INTEG_RATE 250

 if [ "$PX4_SIMULATOR" = "sihsim" ] || [ "$(param show -q SYS_AUTOSTART)" -eq "0" ]; then

-	echo "INFO  [init] SIH simulator"
-
 	if simulator_sih start; then

 		sensor_baro_sim start
@@ -15,131 +13,111 @@ if [ "$PX4_SIMULATOR" = "sihsim" ] || [ "$(param show -q SYS_AUTOSTART)" -eq "0"
 		sensor_mag_sim start

 	else
-		echo "ERROR [init] simulator_sih failed to start"
+		echo "ERROR  [init] simulator_sih failed to start"
 		exit 1
 	fi

 elif [ "$PX4_SIMULATOR" = "gz" ]; then

-	# source generated gz_env.sh for IGN_GAZEBO_RESOURCE_PATH
-	if [ -f ./gz_env.sh ]; then
-		. ./gz_env.sh
-
-	elif [ -f ../gz_env.sh ]; then
-		. ../gz_env.sh
+	# source generated gazebo_env.sh for IGN_GAZEBO_RESOURCE_PATH
+	if [ -f gazebo_env.sh ]; then
+		. ./gazebo_env.sh
+	elif [ -f ../gazebo_env.sh ]; then
+		. ../gazebo_env.sh
 	fi

-	# "gz sim" only avaiilable in Garden and later
-	GZ_SIM_VERSIONS=$(gz sim --versions 2>&1)
-	if [ $? -eq 0 ] && [ "${GZ_SIM_VERSIONS}" != "" ]
-	then
-		# "gz sim" from Garden on
-		gz_command="gz"
-		gz_sub_command="sim"
-	else
-		IGN_GAZEBO_VERSIONS=$(ign gazebo --versions 2>&1)
-		if [ $? -eq 0 ] && [ "${IGN_GAZEBO_VERSIONS}" != "" ]
-		then
-			# "ign gazebo" for Fortress and earlier
-			gz_command="ign"
-			gz_sub_command="gazebo"
+# shellcheck disable=SC2236
+	if [ ! -z $PX4_GZ_VERBOSE ]; then
+		if [ "$PX4_GZ_VERBOSE" -le "4" ] && [ "$PX4_GZ_VERBOSE" -ge "1" ]; then
+			gz_verbose=$PX4_GZ_VERBOSE
 		else
-			echo "ERROR [init] Gazebo gz and ign commands unavailable"
-			exit 1
+			gz_verbose=4
+			echo "WARN  [init] PX4_GZ_VERBOSE was passed: $PX4_GZ_VERBOSE, not in range [1,4], defaulting to: $gz_verbose."
 		fi
-	fi
-
-	# look for running ${gz_command} gazebo world
-	gz_world=$( ${gz_command} topic -l | grep -m 1 -e "/world/.*/clock" | sed 's/\/world\///g; s/\/clock//g' )
-
-	# shellcheck disable=SC2153
-	if [ -z "${gz_world}" ] && [ -n "${PX4_GZ_WORLDS}" ] && [ -n "${PX4_GZ_WORLD}" ]; then
-
-		echo "INFO  [init] starting gazebo with world: ${PX4_GZ_WORLDS}/${PX4_GZ_WORLD}.sdf"
-
-		${gz_command} ${gz_sub_command} --verbose=1 -r -s "${PX4_GZ_WORLDS}/${PX4_GZ_WORLD}.sdf" &
-
-		if [ -z "${HEADLESS}" ]; then
-			# HEADLESS not set, starting gui
-			${gz_command} ${gz_sub_command} -g &
-		fi
-
+		echo "INFO  [init] PX4_GZ_VERBOSE set to $gz_verbose."
 	else
-		echo "INFO  [init] gazebo already running world: ${gz_world}"
-		PX4_GZ_WORLD=${gz_world}
+		gz_verbose=1
+		echo "INFO  [init] PX4_GZ_VERBOSE not explicitly set, defaulting to: $gz_verbose."
 	fi

-	# start gz_bridge
-	if [ -n "${PX4_GZ_MODEL}" ] && [ -z "${PX4_GZ_MODEL_NAME}" ]; then
-		# model specified, gz_bridge will spawn model
+	gz_world=$( ign topic -l | grep -m 1 -e "/world/.*/clock" | sed 's/\/world\///g; s/\/clock//g' )
+	
+	gz_version_major=$( ign gazebo --versions | sed 's/\..*//g' )
+	gz_version_minor=$( ign gazebo --versions | sed 's/'"${gz_version_major}"\.'//; s/\..*//g' )
+	gz_version_point=$( ign gazebo --versions | sed 's/'"${gz_version_major}"\.'//; s/'"${gz_version_minor}"\.'//')

-		if [ -n "${PX4_GZ_MODEL_POSE}" ]; then
+	if [ "$gz_version_major" -gt "6" ] || { [ "$gz_version_major" -eq "6" ] && [ "$gz_version_minor" -gt "12" ]; } || { [ "$gz_version_major" -eq "6" ] && [ "$gz_version_minor" -eq "12" ] && [ "$gz_version_point" -gt "0" ]; }; then
+		echo "INFO  [init] using latest version of MultiCopterMotor plugin."
+	else
+		echo "WARN  [init] using older version of MultiCopterMotor plugin, please update to latest gazebo > 6.12.0."
+		if [ "$PX4_SIM_MODEL" = "x500" ]; then
+			PX4_SIM_MODEL="x500-Legacy"
+			echo "WARN  [init] setting PX4_SIM_MODEL -> $PX4_SIM_MODEL from x500 till gazebo > 6.12.0"
+		fi
+	fi
+
+	if [ -z $gz_world ]; then
+
+		# starting ign gazebo with ${PX4_GZ_WORLD} world
+		echo "INFO  [init] starting ign gazebo"
+# shellcheck disable=SC2153
+		ign gazebo --verbose=$gz_verbose -r -s "${PX4_GZ_WORLDS}/${PX4_GZ_WORLD}.sdf" &
+
+		if [ -z $HEADLESS ]; then
+			# HEADLESS not set, starting ign gazebo gui
+			ign gazebo -g &
+		fi
+	else
+		echo "INFO  [init] ign gazebo already running world: $gz_world"
+		PX4_GZ_WORLD=$gz_world
+	fi
+
+# shellcheck disable=SC2236
+	if [ ! -z $PX4_GZ_MODEL ] && [ -z $PX4_GZ_MODEL_NAME ]; then
+
+# shellcheck disable=SC2236
+		if [ ! -z $PX4_GZ_MODEL_POSE ]; then
 			# Clean potential input line formatting.
-			model_pose="$( echo "${PX4_GZ_MODEL_POSE}" | sed -e 's/^[ \t]*//; s/[ \t]*$//; s/,/ /g; s/  / /g; s/ /,/g' )"
+			model_pose="$( echo ${PX4_GZ_MODEL_POSE} | sed -e 's/^[ \t]*//; s/[ \t]*$//; s/,/ /g; s/  / /g; s/ /,/g' )"
 			echo "INFO  [init] PX4_GZ_MODEL_POSE set, spawning at: ${model_pose}"
-
 		else
 			echo "WARN  [init] PX4_GZ_MODEL_POSE not set, spawning at origin."
 			model_pose="0,0,0,0,0,0"
 		fi
-
 		# start gz bridge with pose arg.
-		if gz_bridge start -p "${model_pose}" -m "${PX4_GZ_MODEL}" -w "${PX4_GZ_WORLD}" -i "${px4_instance}"; then
+		if gz_bridge start -p "${model_pose}"  -m "${PX4_GZ_MODEL}" -w "${PX4_GZ_WORLD}" -i "${px4_instance}"; then
 			sensor_baro_sim start
 			sensor_gps_sim start
 			sensor_mag_sim start
-
 		else
-			echo "ERROR [init] gz_bridge failed to start"
+			echo "ERROR  [init] ign gazebo failed to start"
 			exit 1
 		fi
-
-	elif [ -n "${PX4_GZ_MODEL_NAME}" ] && [ -z "${PX4_GZ_MODEL}" ]; then
-		# model name specificed, gz_bridge will attach to existing model
-
+	elif [ ! -z $PX4_GZ_MODEL_NAME ] && [ -z $PX4_GZ_MODEL ]; then
 		if gz_bridge start -n "${PX4_GZ_MODEL_NAME}" -w "${PX4_GZ_WORLD}"; then
 			sensor_baro_sim start
 			sensor_gps_sim start
 			sensor_mag_sim start
-
 		else
-			echo "ERROR [init] gz_bridge failed to start"
+			echo "ERROR  [init] ign gazebo failed to start"
 			exit 1
 		fi
-
-	elif [ -n "${PX4_SIM_MODEL}" ] && [ -z "${PX4_GZ_MODEL_NAME}" ] && [ -z "${PX4_GZ_MODEL}" ]; then
-
+	elif [ ! -z $PX4_SIM_MODEL ] && [ -z $PX4_GZ_MODEL_NAME ] && [ -z $PX4_GZ_MODEL ]; then
 		echo "WARN  [init] PX4_GZ_MODEL_NAME or PX4_GZ_MODEL not set using PX4_SIM_MODEL."
-
-		if gz_bridge start -m "${PX4_SIM_MODEL#*gz_}" -w "${PX4_GZ_WORLD}" -i "${px4_instance}"; then
+		if gz_bridge start -m "${PX4_SIM_MODEL}" -w "${PX4_GZ_WORLD}" -i "${px4_instance}"; then
 			sensor_baro_sim start
 			sensor_gps_sim start
 			sensor_mag_sim start
-
 		else
-			echo "ERROR [init] gz_bridge failed to start"
+			echo "ERROR  [init] ign gazebo failed to start"
 			exit 1
 		fi

 	else
-		echo "ERROR [init] failed to pass only PX4_GZ_MODEL_NAME or PX4_GZ_MODEL"
+		echo "ERROR  [init] failed to pass only PX4_GZ_MODEL_NAME or PX4_GZ_MODEL"
 		exit 1
 	fi

-elif [ "$PX4_SIM_MODEL" = "jmavsim_iris" ] || [ "$(param show -q SYS_AUTOSTART)" -eq "10017" ]; then
-
-	echo "INFO  [init] jMAVSim simulator"
-
-	if jps | grep -i jmavsim; then
-		kill "$(jps | grep -i jmavsim | awk '{print $1}')" || true
-		sleep 1
-	fi
-
-	param set IMU_INTEG_RATE 250
-	./jmavsim_run.sh -l -r 250 &
-
-	simulator_mavlink start -h localhost $((4560+px4_instance))
-
 else
 	# otherwise start simulator (mavlink) module
 	simulator_tcp_port=$((4560+px4_instance))
@@ -150,16 +128,16 @@ else
 	if [ -z "${PX4_SIM_HOSTNAME}" ]; then

 		if [ -z "${PX4_SIM_HOST_ADDR}" ]; then
-			echo "INFO  [init] PX4_SIM_HOSTNAME: localhost"
+			echo "PX4 SIM HOST: localhost"
 			simulator_mavlink start -c $simulator_tcp_port
 		else
-			echo "INFO  [init] PX4_SIM_HOSTNAME: ${PX4_SIM_HOST_ADDR}"
-			simulator_mavlink start -t "${PX4_SIM_HOST_ADDR}" "${simulator_tcp_port}"
+			echo "PX4 SIM HOST: $PX4_SIM_HOST_ADDR"
+			simulator_mavlink start -t $PX4_SIM_HOST_ADDR $simulator_tcp_port
 		fi

 	else
-		echo "INFO  [init] PX4_SIM_HOSTNAME: ${PX4_SIM_HOSTNAME}"
-		simulator_mavlink start -h "${PX4_SIM_HOSTNAME}" "${simulator_tcp_port}"
+		echo "PX4 SIM HOST: $PX4_SIM_HOSTNAME"
+		simulator_mavlink start -h $PX4_SIM_HOSTNAME $simulator_tcp_port
 	fi

 fi
@@ -74,7 +74,7 @@ if [ -f $PARAM_FILE ]; then
 	then
 		echo "ERROR [init] param import failed"

-		bsondump $PARAM_FILE
+		param dump $PARAM_FILE

 		# try to make a backup copy
 		cp $PARAM_FILE param_import_fail.bson
@@ -85,7 +85,7 @@ if [ -f $PARAM_FILE ]; then
 			echo "[init] importing from parameter backup"

 			# dump current backup file contents for comparison
-			bsondump $PARAM_BACKUP_FILE
+			param dump $PARAM_BACKUP_FILE

 			param import $PARAM_BACKUP_FILE

@@ -142,9 +142,7 @@ then
 	param set CAL_GYRO2_ID 1311004 # 1311004: DRV_IMU_DEVTYPE_SIM, BUS: 3, ADDR: 1, TYPE: SIMULATION

 	param set CAL_MAG0_ID 197388
-	param set CAL_MAG0_PRIO 50
 	param set CAL_MAG1_ID 197644
-	param set CAL_MAG1_PRIO 50

 	param set SENS_BOARD_X_OFF 0.000001
 	param set SENS_DPRES_OFF 0.001
@@ -262,19 +260,7 @@ fi
 navigator start

 # Try to start the microdds_client with UDP transport if module exists
-microdds_ns=""
-if [ "$px4_instance" -ne "0" ]
-then
-	# Assign new xrce dds key based on instance number and set default namespace
-	param set XRCE_DDS_KEY ${px4_instance}
-	microdds_ns="-n px4_$px4_instance"
-fi
-if [ -n "$PX4_MICRODDS_NS" ]
-then
-	# Override namespace if environment variable is defined
-	microdds_ns="-n $PX4_MICRODDS_NS"
-fi
-microdds_client start -t udp -p 8888 $microdds_ns
+microdds_client start -t udp -p 8888

 if param greater -s MNT_MODE_IN -1
 then
@@ -31,6 +31,7 @@ param set-default MC_PITCH_P 6
 param set-default MC_PITCHRATE_P 0.2
 param set-default MC_ROLL_P 6
 param set-default MC_ROLLRATE_P 0.3
+param set-default MIS_LTRMIN_ALT 10
 param set-default MIS_TAKEOFF_ALT 10
 param set-default MIS_YAW_TMT 10

@@ -22,7 +22,7 @@ param set-default VT_ELEV_MC_LOCK 0
 param set-default VT_MOT_COUNT 2
 param set-default VT_TYPE 0
 param set-default VT_FW_DIFTHR_EN 1
-param set-default VT_FW_DIFTHR_S_Y 0.3
+param set-default VT_FW_DIFTHR_SC 0.3
 param set-default MPC_MAN_Y_MAX 60
 param set-default MC_PITCH_P 5

@@ -39,6 +39,7 @@ param set-default GND_THR_CRUISE 0.3
 param set-default GND_THR_MAX 0.5
 param set-default GND_THR_MIN 0

+param set-default MIS_LTRMIN_ALT 0.01
 param set-default MIS_TAKEOFF_ALT 0.01

 param set-default NAV_ACC_RAD 0.5
@@ -44,6 +44,7 @@ param set-default GND_SPEED_D 0.001
 param set-default GND_SPEED_IMAX 0.125
 param set-default GND_SPEED_THR_SC 1

+param set-default MIS_LTRMIN_ALT 0.01
 param set-default MIS_TAKEOFF_ALT 0.01

 param set-default NAV_ACC_RAD 0.5
@@ -45,6 +45,7 @@ param set-default GND_SPEED_D 0.001
 param set-default GND_SPEED_IMAX 0.125
 param set-default GND_SPEED_THR_SC 1

+param set-default MIS_LTRMIN_ALT 0.01
 param set-default MIS_TAKEOFF_ALT 0.01

 param set-default NAV_ACC_RAD 0.5
@@ -13,6 +13,7 @@ param set-default MAV_TYPE 11
 #
 # Default parameters for UGVs.
 #
+param set-default MIS_LTRMIN_ALT 0.01
 param set-default MIS_TAKEOFF_ALT 0.01

 param set-default NAV_ACC_RAD 2
@@ -18,7 +18,6 @@ control_allocator start
 #
 # Start attitude controller.
 #
-fw_rate_control start
 fw_att_control start
 fw_pos_control_l1 start
 airspeed_selector start
@@ -43,8 +43,8 @@ param set-default RTL_LAND_DELAY -1
 param set-default NAV_ACC_RAD 10

 param set-default MIS_DIST_WPS 5000
+param set-default MIS_LTRMIN_ALT 25
 param set-default MIS_TAKEOFF_ALT 25
-param set-default MIS_TKO_LAND_REQ 2

 #
 # FW takeoff acceleration can easily exceed ublox GPS 2G default.
@@ -13,6 +13,7 @@ param set-default MAV_TYPE 10
 #
 # Default parameters for UGVs.
 #
+param set-default MIS_LTRMIN_ALT 0.01
 param set-default MIS_TAKEOFF_ALT 0.01

 param set-default NAV_ACC_RAD 2
@@ -191,10 +191,7 @@ then
 	ist8308 -X -q start
 	ist8310 -X -q start
 	lis2mdl -X -q start
-	if ! lis3mdl -X -q start
-	then
-		lis3mdl -X -q -a 0x1c start
-	fi
+	lis3mdl -X -q start
 	qmc5883l -X -q start
 	rm3100 -X -q start

@@ -35,7 +35,6 @@ then
 	mc_autotune_attitude_control start
 fi

-fw_rate_control start vtol
 fw_att_control start vtol
 fw_pos_control_l1 start vtol
 fw_autotune_attitude_control start vtol
@@ -19,7 +19,6 @@ param set-default EKF2_FUSE_BETA 1
 param set-default HTE_VXY_THR 2.0

 param set-default MIS_DIST_WPS 5000
-param set-default MIS_TKO_LAND_REQ 2

 param set-default MPC_ACC_HOR_MAX 2
 param set-default MPC_VEL_MANUAL 5
@@ -130,7 +130,7 @@ else
 		echo "ERROR [init] param import failed"
 		set STARTUP_TUNE 2 # tune 2 = ERROR_TUNE

-		bsondump $PARAM_FILE
+		param dump $PARAM_FILE

 		if [ -d "/fs/microsd" ]
 		then
@@ -143,7 +143,7 @@ else
 				echo "[init] importing from parameter backup"

 				# dump current backup file contents for comparison
-				bsondump $PARAM_BACKUP_FILE
+				param dump $PARAM_BACKUP_FILE

 				param import $PARAM_BACKUP_FILE

@@ -162,7 +162,7 @@ else
 		param select-backup $PARAM_BACKUP_FILE
 	fi

-	if ver hwcmp PX4_FMU_V5X PX4_FMU_V6X ARK_FMU_V6X
+	if ver hwcmp PX4_FMU_V5X PX4_FMU_V6X
 	then
 		netman update -i eth0
 	fi
@@ -264,6 +264,23 @@ else
 		. $FCONFIG
 	fi

+	#
+	# Check if UAVCAN is enabled, default to it for ESCs.
+	#
+	if param greater -s UAVCAN_ENABLE 0
+	then
+		# Start core UAVCAN module.
+		if ! uavcan start
+		then
+			tune_control play error
+		fi
+	else
+		if param greater -s CYPHAL_ENABLE 0
+		then
+			cyphal start
+		fi
+	fi
+
 	#
 	# Start IO for PWM output or RC input if enabled
 	#
@@ -350,7 +367,6 @@ else
 			simulator_sih start
 			sensor_baro_sim start
 			sensor_mag_sim start
-			sensor_gps_sim start
 		fi

 	else
@@ -511,23 +527,6 @@ else
 	fi
 	unset BOARD_BOOTLOADER_UPGRADE

-	#
-	# Check if UAVCAN is enabled, default to it for ESCs.
-	#
-	if param greater -s UAVCAN_ENABLE 0
-	then
-		# Start core UAVCAN module.
-		if ! uavcan start
-		then
-			tune_control play error
-		fi
-	else
-		if param greater -s CYPHAL_ENABLE 0
-		then
-			cyphal start
-		fi
-	fi
-
 #
 # End of autostart.
 #
@@ -43,13 +43,13 @@ do
 	${DIR}/run_nsh_cmd.py --device ${SERIAL_DEVICE} --cmd 'param reset SYS_HITL'
 	${DIR}/run_nsh_cmd.py --device ${SERIAL_DEVICE} --cmd 'param status'
 	${DIR}/run_nsh_cmd.py --device ${SERIAL_DEVICE} --cmd 'param save'
-	${DIR}/run_nsh_cmd.py --device ${SERIAL_DEVICE} --cmd 'bsondump /fs/mtd_params'
+	${DIR}/run_nsh_cmd.py --device ${SERIAL_DEVICE} --cmd 'param dump'

 	${DIR}/reboot.py --device ${SERIAL_DEVICE}

 	${DIR}/run_nsh_cmd.py --device ${SERIAL_DEVICE} --cmd 'param status'
-	${DIR}/run_nsh_cmd.py --device ${SERIAL_DEVICE} --cmd 'bsondump /fs/mtd_params' || true
-	${DIR}/run_nsh_cmd.py --device ${SERIAL_DEVICE} --cmd 'bsondump /fs/microsd/parameters_backup.bson' || true
+	${DIR}/run_nsh_cmd.py --device ${SERIAL_DEVICE} --cmd 'param dump /fs/mtd_params' || true
+	${DIR}/run_nsh_cmd.py --device ${SERIAL_DEVICE} --cmd 'param dump /fs/microsd/parameters_backup.bson' || true

 	${DIR}/run_nsh_cmd.py --device ${SERIAL_DEVICE} --cmd 'ps'
 	${DIR}/run_nsh_cmd.py --device ${SERIAL_DEVICE} --cmd 'work_queue status'
@@ -28,7 +28,7 @@ args = parser.parse_args()
 verbose = args.verbose

 build_configs = []
-excluded_boards = ['modalai_voxl2', 'px4_ros2']  # TODO: fix and enable
+excluded_boards = ['modalai_voxl2']  # TODO: fix and enable
 excluded_manufacturers = ['atlflight']
 excluded_platforms = ['qurt']
 excluded_labels = [
@@ -51,9 +51,9 @@ div.frame_variant td, div.frame_variant th {
  text-align : left;
 }
 </style>\n\n"""
-
+ 
        type_set = set()
-
+        
        if len(image_path) > 0 and image_path[-1] != '/':
            image_path = image_path + '/'

@@ -62,7 +62,7 @@ div.frame_variant td, div.frame_variant th {
               result += '## %s\n\n' % group.GetClass()
               type_set.add(group.GetClass())

-            result += '### %s\n\n' % group.GetType()
+            result += '### %s\n\n' % group.GetName()

            # Display an image of the frame
            image_name = group.GetImageName()
@@ -73,11 +73,11 @@ div.frame_variant td, div.frame_variant th {
            # check if all outputs are equal for the group: if so, show them
            # only once
            all_outputs = {}
-            num_configs = len(group.GetAirframes())
-            for airframe in group.GetAirframes():
-                if not self.IsExcluded(airframe, board):
-                    for output_name in airframe.GetOutputCodes():
-                        value = airframe.GetOutputValue(output_name)
+            num_configs = len(group.GetParams())
+            for param in group.GetParams():
+                if not self.IsExcluded(param, board):
+                    for output_name in param.GetOutputCodes():
+                        value = param.GetOutputValue(output_name)
                        key_value_pair = (output_name, value)
                        if key_value_pair not in all_outputs:
                            all_outputs[key_value_pair] = 0
@@ -104,17 +104,18 @@ div.frame_variant td, div.frame_variant th {
            result += ' </thead>\n'
            result += '<tbody>\n'

-            for airframe in group.GetAirframes():
-                if not self.IsExcluded(airframe, board):
-                    name = airframe.GetName()
-                    airframe_id = airframe.GetId()
+            for param in group.GetParams():
+                if not self.IsExcluded(param, board):
+                    #print("generating: {0} {1}".format(param.GetName(), excluded))
+                    name = param.GetName()
+                    airframe_id = param.GetId()
                    airframe_id_entry = '<p><code>SYS_AUTOSTART</code> = %s</p>' % (airframe_id)
-                    maintainer = airframe.GetMaintainer()
+                    maintainer = param.GetMaintainer()
                    maintainer_entry = ''
                    if maintainer != '':
                        maintainer_entry = 'Maintainer: %s' % (html.escape(maintainer))
-                    url = airframe.GetFieldValue('url')
-                    name_anchor='%s_%s_%s' % (group.GetClass(),group.GetType(),name)
+                    url = param.GetFieldValue('url')
+                    name_anchor='%s_%s_%s' % (group.GetClass(),group.GetName(),name)
                    name_anchor=name_anchor.replace(' ','_').lower()
                    name_anchor=name_anchor.replace('"','_').lower()
                    name_anchor='id="%s"' % name_anchor
@@ -123,8 +124,8 @@ div.frame_variant td, div.frame_variant th {
                        name_entry = '<a href="%s">%s</a>' % (url, name)
                    outputs = '<ul>'
                    has_outputs = False
-                    for output_name in airframe.GetOutputCodes():
-                        value = airframe.GetOutputValue(output_name)
+                    for output_name in param.GetOutputCodes():
+                        value = param.GetOutputValue(output_name)
                        valstrs = value.split(";")
                        key_value_pair = (output_name, value)
                        if all_outputs[key_value_pair] < num_configs:
@@ -151,9 +152,9 @@ div.frame_variant td, div.frame_variant th {

        self.output = result

-    def IsExcluded(self, airframe, board):
-        for code in airframe.GetArchCodes():
-            if "CONFIG_ARCH_BOARD_{0}".format(code) == board and airframe.GetArchValue(code) == "exclude":
+    def IsExcluded(self, param, board):
+        for code in param.GetArchCodes():
+            if "CONFIG_ARCH_BOARD_{0}".format(code) == board and param.GetArchValue(code) == "exclude":
                return True
        return False

@@ -3,9 +3,6 @@ import codecs
 import os

 class RCOutput():
-    """
-        Generates RC scripts for the airframes
-    """
    def __init__(self, groups, board, post_start=False):

        result = (  "#\n"
@@ -37,33 +34,33 @@ class RCOutput():
        result += "set AIRFRAME none\n"
        result += "\n"
        for group in groups:
-            result += "# GROUP: %s\n\n" % group.GetType()
-            for airframe in group.GetAirframes():
+            result += "# GROUP: %s\n\n" % group.GetName()
+            for param in group.GetParams():
                excluded = False
-                for code in airframe.GetArchCodes():
-                    if "{0}".format(code) == board and airframe.GetArchValue(code) == "exclude":
+                for code in param.GetArchCodes():
+                    if "{0}".format(code) == board and param.GetArchValue(code) == "exclude":
                        excluded = True
                if excluded:
                    continue

                if post_start:
                    # Path to post-start sript
-                    path = airframe.GetPostPath()
+                    path = param.GetPostPath()
                else:
                    # Path to start script
-                    path = airframe.GetPath()
+                    path = param.GetPath()

                if not path:
                    continue

                path = os.path.split(path)[1]

-                id_val = airframe.GetId()
-                name = airframe.GetFieldValue("short_desc")
-                long_desc = airframe.GetFieldValue("long_desc")
+                id_val = param.GetId()
+                name = param.GetFieldValue("short_desc")
+                long_desc = param.GetFieldValue("long_desc")

                result +=   "#\n"
-                result +=   "# %s\n" % airframe.GetName()
+                result +=   "# %s\n" % param.GetName()
                result +=   "if param compare SYS_AUTOSTART %s\n" % id_val
                result +=   "then\n"
                result +=   "\tset AIRFRAME %s\n" % path
@@ -2,38 +2,31 @@ import sys
 import re
 import os

-class AirframeGroup(object):
+class ParameterGroup(object):
    """
-    Airframe group
-
-    type: specific vehicle type (e.g. VTOL Tiltrotor, VTOL Quadrotor, etc.)
-    class: vehicle class (e.g. Multicopter, Fixed Wing, etc.)
+    Single parameter group
    """
-    def __init__(self, type, af_class):
-        self.type = type
+    def __init__(self, name, af_class):
+        self.name = name
        self.af_class = af_class
-        self.airframes = []
+        self.params = []


-    def AddAirframe(self, airframe):
+    def AddParameter(self, param):
        """
-        Add airframe to the airframe group
+        Add parameter to the group
        """
-        self.airframes.append(airframe)
+        self.params.append(param)

-    def GetType(self):
+    def GetName(self):
        """
-        Get airframe group's vehicle type
-
-        e.g. VTOL Tiltrotor, VTOL Quadrotor, etc.
+        Get parameter group name
        """
-        return self.type
+        return self.name

    def GetClass(self):
        """
-        Get airframe group's vehicle class
-
-        e.g. Multicopter, Fixed Wing, etc.
+        Get parameter group vehicle type.
        """
        return self.af_class

@@ -41,84 +34,86 @@ class AirframeGroup(object):
        """
        Get parameter group image base name (w/o extension)
        """
-        if (self.type == "Standard Plane"):
+        if (self.name == "Standard Plane"):
            return "Plane"
-        elif (self.type == "Flying Wing"):
+        elif (self.name == "Flying Wing"):
            return "FlyingWing"
-        elif (self.type == "Quadrotor x"):
+        elif (self.name == "Quadrotor x"):
            return "QuadRotorX"
-        elif (self.type == "Quadrotor +"):
+        elif (self.name == "Quadrotor +"):
            return "QuadRotorPlus"
-        elif (self.type == "Hexarotor x"):
+        elif (self.name == "Hexarotor x"):
            return "HexaRotorX"
-        elif (self.type == "Hexarotor +"):
+        elif (self.name == "Hexarotor +"):
            return "HexaRotorPlus"
-        elif (self.type == "Octorotor +"):
+        elif (self.name == "Octorotor +"):
            return "OctoRotorPlus"
-        elif (self.type == "Octorotor x"):
+        elif (self.name == "Octorotor x"):
            return "OctoRotorX"
-        elif (self.type == "Octorotor Coaxial"):
+        elif (self.name == "Octorotor Coaxial"):
            return "OctoRotorXCoaxial"
-        elif (self.type == "Octo Coax Wide"):
+        elif (self.name == "Octo Coax Wide"):
            return "OctoRotorXCoaxial"
-        elif (self.type == "Quadrotor Wide"):
+        elif (self.name == "Quadrotor Wide"):
            return "QuadRotorWide"
-        elif (self.type == "Quadrotor H"):
+        elif (self.name == "Quadrotor H"):
            return "QuadRotorH"
-        elif (self.type == "Dodecarotor cox"):
+        elif (self.name == "Dodecarotor cox"):
            return "DodecaRotorXCoaxial"
-        elif (self.type == "Simulation"):
+        elif (self.name == "Simulation"):
            return "AirframeSimulation"
-        elif (self.type == "Plane A-Tail"):
+        elif (self.name == "Plane A-Tail"):
            return "PlaneATail"
-        elif (self.type == "Plane V-Tail"):
+        elif (self.name == "Plane V-Tail"):
            return "PlaneVTail"
-        elif (self.type == "VTOL Duo Tailsitter"):
+        elif (self.name == "VTOL Duo Tailsitter"):
            return "VTOLDuoRotorTailSitter"
-        elif (self.type == "Standard VTOL"):
+        elif (self.name == "Standard VTOL"):
            return "VTOLPlane"
-        elif (self.type == "VTOL Quad Tailsitter"):
+        elif (self.name == "VTOL Quad Tailsitter"):
            return "VTOLQuadRotorTailSitter"
-        elif (self.type == "VTOL Tiltrotor"):
+        elif (self.name == "VTOL Tiltrotor"):
            return "VTOLTiltRotor"
-        elif (self.type == "VTOL Octoplane"):
+        elif (self.name == "VTOL Octoplane"):
            return "VTOLPlaneOcto"
-        elif (self.type == "Coaxial Helicopter"):
+        elif (self.name == "Coaxial Helicopter"):
            return "HelicopterCoaxial"
-        elif (self.type == "Helicopter"):
+        elif (self.name == "Helicopter"):
            return "Helicopter"
-        elif (self.type == "Hexarotor Coaxial"):
+        elif (self.name == "Hexarotor Coaxial"):
            return "Y6B"
-        elif (self.type == "Y6A"):
+        elif (self.name == "Y6A"):
            return "Y6A"
-        elif (self.type == "Tricopter Y-"):
+        elif (self.name == "Tricopter Y-"):
            return "YMinus"
-        elif (self.type == "Tricopter Y+"):
+        elif (self.name == "Tricopter Y+"):
            return "YPlus"
-        elif (self.type == "Autogyro"):
+        elif (self.name == "Autogyro"):
            return "Autogyro"
-        elif (self.type == "Airship"):
+        elif (self.name == "Airship"):
            return "Airship"
-        elif (self.type == "Rover"):
+        elif (self.name == "Rover"):
            return "Rover"
-        elif (self.type == "Boat"):
+        elif (self.name == "Boat"):
            return "Boat"
-        elif (self.type == "Balloon"):
+        elif (self.name == "Balloon"):
            return "Balloon"
-        elif (self.type == "Vectored 6 DOF UUV"):
+        elif (self.name == "Vectored 6 DOF UUV"):
            return "Vectored6DofUUV"
        return "AirframeUnknown"

-    def GetAirframes(self):
+    def GetParams(self):
        """
-        Returns the parsed list of airframes objects. Note that returned
-        object is not a copy. Modifications affect state of the parser.
+        Returns the parsed list of parameters. Every parameter is a Parameter
+        object. Note that returned object is not a copy. Modifications affect
+        state of the parser.
        """
-        return sorted(self.airframes, key=lambda x: x.GetId())

-class Airframe(object):
+        return sorted(self.params, key=lambda x: x.GetId())
+
+class Parameter(object):
    """
-    Single Airframe definition
+    Single parameter
    """

    # Define sorting order of the fields
@@ -293,7 +288,7 @@ class SourceParser(object):
    }

    def __init__(self):
-        self.airframe_groups = {}
+        self.param_groups = {}

    def GetSupportedExtensions(self):
        """
@@ -352,10 +347,10 @@ class SourceParser(object):
                            tag, desc = m.group(1, 2)
                            if (tag == "output"):
                                key, text = desc.split(' ', 1)
-                                outputs[key] = text
+                                outputs[key] = text;
                            elif (tag == "board"):
                                key, text = desc.split(' ', 1)
-                                archs[key] = text
+                                archs[key] = text;
                            else:
                                tags[tag] = desc
                            current_tag = tag
@@ -432,7 +427,7 @@ class SourceParser(object):
            post_path = None

        # We already know this is an airframe config, so add it
-        airframe = Airframe(path, post_path, airframe_name, airframe_type, airframe_class, airframe_id, maintainer)
+        param = Parameter(path, post_path, airframe_name, airframe_type, airframe_class, airframe_id, maintainer)

        # Done with file, store
        for tag in tags:
@@ -445,24 +440,24 @@ class SourceParser(object):
            if tag == "name":
                airframe_name = tags[tag]
            else:
-                airframe.SetField(tag, tags[tag])
+                param.SetField(tag, tags[tag])

        # Store outputs
        for output in outputs:
-            airframe.SetOutput(output, outputs[output])
+            param.SetOutput(output, outputs[output])

        # Store outputs
        for arch in archs:
-            airframe.SetArch(arch, archs[arch])
+            param.SetArch(arch, archs[arch])

        # Store the parameter

        # Create a class-specific airframe group. This is needed to catch cases where an airframe type might cross classes (e.g. simulation)
-        class_group_identifier=airframe_type + airframe_class
-        if class_group_identifier not in self.airframe_groups:
-            #self.airframe_groups[airframe_type] = ParameterGroup(airframe_type)  #HW TEST REMOVE
-            self.airframe_groups[class_group_identifier] = AirframeGroup(airframe_type, airframe_class)
-        self.airframe_groups[class_group_identifier].AddAirframe(airframe)
+        class_group_identifier=airframe_type+airframe_class
+        if class_group_identifier not in self.param_groups:
+            #self.param_groups[airframe_type] = ParameterGroup(airframe_type)  #HW TEST REMOVE
+            self.param_groups[class_group_identifier] = ParameterGroup(airframe_type, airframe_class)
+        self.param_groups[class_group_identifier].AddParameter(param)

        return True

@@ -478,8 +473,8 @@ class SourceParser(object):
        Validates the airframe meta data.
        """
        seenParamNames = []
-        for group in self.GetAirframeGroups():
-            for param in group.GetAirframes():
+        for group in self.GetParamGroups():
+            for param in group.GetParams():
                name  = param.GetName()
                board = param.GetFieldValue("board")
                # Check for duplicates
@@ -492,27 +487,27 @@ class SourceParser(object):

        return True

-    def GetAirframeGroups(self):
+    def GetParamGroups(self):
        """
-        Returns the parsed list of Airframe groups. Every Airframe is an Airframe
+        Returns the parsed list of parameters. Every parameter is a Parameter
        object. Note that returned object is not a copy. Modifications affect
        state of the parser.
        """
-        groups = self.airframe_groups.values()
-        groups = sorted(groups, key=lambda x: x.GetType())
+        groups = self.param_groups.values()
+        groups = sorted(groups, key=lambda x: x.GetName())
        groups = sorted(groups, key=lambda x: x.GetClass())
-        groups = sorted(groups, key=lambda x: self.priority.get(x.GetType(), 0), reverse=True)
+        groups = sorted(groups, key=lambda x: self.priority.get(x.GetName(), 0), reverse=True)

        #Rename duplicate groups to include the class (creating unique headings in page TOC)
        duplicate_test=set()
        duplicate_set=set()
        for group in groups:
-            if group.GetType() in duplicate_test:
-                duplicate_set.add(group.GetType())
+            if group.GetName() in duplicate_test:
+                duplicate_set.add(group.GetName())
            else:
-                duplicate_test.add(group.GetType() )
+                duplicate_test.add(group.GetName() )
        for group in groups:
-            if group.GetType() in duplicate_set:
-                group.name=group.GetType()+' (%s)' % group.GetClass()
+            if group.GetName() in duplicate_set:
+                group.name=group.GetName()+' (%s)' % group.GetClass()

        return groups
@@ -28,28 +28,28 @@ class XMLOutput():
        xml_version.text = "1"
        for group in groups:
            xml_group = ET.SubElement(xml_parameters, "airframe_group")
-            xml_group.attrib["name"] = group.GetType()
+            xml_group.attrib["name"] = group.GetName()
            xml_group.attrib["image"] = group.GetImageName()
-            for airframe in group.GetAirframes():
+            for param in group.GetParams():

                # check if there is an exclude tag for this airframe
                excluded = False
-                for code in airframe.GetArchCodes():
-                    if "CONFIG_ARCH_BOARD_{0}".format(code) == board and airframe.GetArchValue(code) == "exclude":
+                for code in param.GetArchCodes():
+                    if "CONFIG_ARCH_BOARD_{0}".format(code) == board and param.GetArchValue(code) == "exclude":
                        excluded = True

                if not excluded:
-                    #print("generating: {0} {1}".format(airframe.GetName(), excluded))
+                    #print("generating: {0} {1}".format(param.GetName(), excluded))
                    xml_param = ET.SubElement(xml_group, "airframe")
-                    xml_param.attrib["name"] = airframe.GetName()
-                    xml_param.attrib["id"] = airframe.GetId()
-                    xml_param.attrib["maintainer"] = airframe.GetMaintainer()
-                    for code in airframe.GetFieldCodes():
-                        value = airframe.GetFieldValue(code)
+                    xml_param.attrib["name"] = param.GetName()
+                    xml_param.attrib["id"] = param.GetId()
+                    xml_param.attrib["maintainer"] = param.GetMaintainer()
+                    for code in param.GetFieldCodes():
+                        value = param.GetFieldValue(code)
                        xml_field = ET.SubElement(xml_param, code)
                        xml_field.text = value
-                    for code in airframe.GetOutputCodes():
-                        value = airframe.GetOutputValue(code)
+                    for code in param.GetOutputCodes():
+                        value = param.GetOutputValue(code)
                        valstrs = value.split(";")
                        xml_field = ET.SubElement(xml_param, "output")
                        xml_field.attrib["name"] = code
@@ -35,11 +35,12 @@
 #
 # PX4 airframe config processor (main executable file)
 #
-# This tool scans the PX4 ROMFS directory for declarations of airframes
+# This tool scans the PX4 ROMFS code for declarations of airframes
+#
+# Currently supported formats are:
+#   * XML for the parametric UI generator
+#   * Markdown for the PX4 dev guide (https://github.com/PX4/Devguide)
 #
-# Currently supported output formats are:
-#   * XML for the parametric UI generator (Used in QGC)
-#   * Markdown for the PX4 User guide (https://github.com/PX4/PX4-user_guide)
 #

 from __future__ import print_function
@@ -103,31 +104,31 @@ def main():
    # We can't validate yet
    # if not parser.Validate():
    #     sys.exit(1)
-    airframe_groups = parser.GetAirframeGroups()
+    param_groups = parser.GetParamGroups()

    # Output to XML file
    if args.xml:
        if args.verbose: print("Creating XML file " + args.xml)
-        out = xmlout.XMLOutput(airframe_groups, args.board)
+        out = xmlout.XMLOutput(param_groups, args.board)
        out.Save(args.xml)

    # Output to markdown file
    if args.markdown:
        if args.verbose: print("Creating markdown file " + args.markdown)
-        out = markdownout.MarkdownTablesOutput(airframe_groups, args.board, args.image_path)
+        out = markdownout.MarkdownTablesOutput(param_groups, args.board, args.image_path)
        out.Save(args.markdown)

    # Output to start scripts
    if args.start_script:
        # Airframe start script
        if args.verbose: print("Creating start script " + args.start_script)
-        out = rcout.RCOutput(airframe_groups, args.board)
+        out = rcout.RCOutput(param_groups, args.board)
        out.Save(args.start_script)

        # Airframe post-start script
        post_start_script = args.start_script + '.post'
        if args.verbose: print("Creating post-start script " + post_start_script)
-        out_post = rcout.RCOutput(airframe_groups, args.board, post_start=True)
+        out_post = rcout.RCOutput(param_groups, args.board, post_start=True)
        out_post.Save(post_start_script)

    if (args.verbose): print("All done!")
--- a/Show More
+++ b/Show More