mirror of
https://gitee.com/mirrors_PX4/PX4-Autopilot.git
synced 2026-05-24 15:17:35 +08:00
Compare commits
1 Commits
| Author | SHA1 | Date | |
|---|---|---|---|
 Daniel Agar
|
b491356d3f |
@@ -69,18 +69,24 @@ pipeline {
|
||||
"matek_h743-slim_default",
|
||||
"matek_h743_default",
|
||||
"modalai_fc-v1_default",
|
||||
"modalai_fc-v1_rtps",
|
||||
"modalai_fc-v2_default",
|
||||
"modalai_voxl2-io_default",
|
||||
"mro_ctrl-zero-f7_default",
|
||||
"mro_ctrl-zero-f7-oem_default",
|
||||
"mro_ctrl-zero-h7-oem_default",
|
||||
"mro_ctrl-zero-h7-oem_rtps",
|
||||
"mro_ctrl-zero-h7_default",
|
||||
"mro_ctrl-zero-h7_rtps",
|
||||
"mro_pixracerpro_default",
|
||||
"mro_pixracerpro_rtps",
|
||||
"mro_x21-777_default",
|
||||
"mro_x21_default",
|
||||
"nxp_fmuk66-e_default",
|
||||
"nxp_fmuk66-e_rtps",
|
||||
"nxp_fmuk66-e_socketcan",
|
||||
"nxp_fmuk66-v3_default",
|
||||
"nxp_fmuk66-v3_rtps",
|
||||
"nxp_fmuk66-v3_socketcan",
|
||||
"nxp_fmurt1062-v1_default",
|
||||
"nxp_ucans32k146_canbootloader",
|
||||
@@ -98,6 +104,7 @@ pipeline {
|
||||
"px4_fmu-v5_debug",
|
||||
"px4_fmu-v5_default",
|
||||
"px4_fmu-v5_lto",
|
||||
"px4_fmu-v5_rtps",
|
||||
"px4_fmu-v5_stackcheck",
|
||||
"px4_fmu-v5_uavcanv0periph",
|
||||
"px4_fmu-v5x_default",
|
||||
|
||||
+86
-33
@@ -61,13 +61,9 @@ pipeline {
|
||||
sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "IMU_GYRO_RATEMAX" --value "2000"'
|
||||
sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "SYS_AUTOSTART" --value "13000"' // generic vtol standard
|
||||
sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "SYS_BL_UPDATE" --value "1"' // update bootloader
|
||||
sh './Tools/HIL/reboot.py --device `find /dev/serial -name *usb-*`' // reboot to apply
|
||||
|
||||
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "logger on"' // run logger
|
||||
checkStatus()
|
||||
quickCalibrate()
|
||||
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "px4io status"'
|
||||
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "logger off"' // stop logger
|
||||
}
|
||||
}
|
||||
stage("print topics") {
|
||||
@@ -136,12 +132,8 @@ pipeline {
|
||||
sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "IMU_GYRO_RATEMAX" --value "2000"'
|
||||
sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "SYS_AUTOSTART" --value "13000"' // generic vtol standard
|
||||
sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "SYS_BL_UPDATE" --value "1"' // update bootloader
|
||||
sh './Tools/HIL/reboot.py --device `find /dev/serial -name *usb-*`' // reboot to apply
|
||||
|
||||
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "logger on"' // run logger
|
||||
checkStatus()
|
||||
quickCalibrate()
|
||||
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "logger off"' // stop logger
|
||||
}
|
||||
}
|
||||
stage("print topics") {
|
||||
@@ -160,6 +152,76 @@ pipeline {
|
||||
}
|
||||
}
|
||||
|
||||
stage("px4_fmu-v3_test") {
|
||||
stages {
|
||||
stage("build px4_fmu-v3_test") {
|
||||
agent {
|
||||
docker {
|
||||
image 'px4io/px4-dev-nuttx-focal:2021-09-08'
|
||||
args '--cpu-shares 512 -e CCACHE_BASEDIR=$WORKSPACE -v ${CCACHE_DIR}:${CCACHE_DIR}:rw'
|
||||
}
|
||||
}
|
||||
steps {
|
||||
checkoutSCM()
|
||||
sh 'make px4_fmu-v3_test'
|
||||
sh 'make px4_fmu-v3_test bootloader_elf'
|
||||
sh 'ccache -s'
|
||||
stash includes: 'build/*/*.elf, platforms/nuttx/Debug/*, platforms/nuttx/NuttX/nuttx/tools/nuttx-gdbinit, Tools/HIL/*', name: 'px4_fmu-v3_test'
|
||||
}
|
||||
post {
|
||||
always {
|
||||
sh 'make distclean; git clean -ff -x -d .'
|
||||
}
|
||||
}
|
||||
} // stage build
|
||||
stage("hardware") {
|
||||
agent {
|
||||
label 'px4_fmu-v3'
|
||||
}
|
||||
stages {
|
||||
stage("flash") {
|
||||
steps {
|
||||
sh 'export'
|
||||
sh 'find /dev/serial'
|
||||
unstash 'px4_fmu-v3_test'
|
||||
sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/px4_fmu-v3_test/px4_fmu-v3_bootloader.elf'
|
||||
// flash board and watch bootup
|
||||
sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/px4_fmu-v3_test/px4_fmu-v3_test.elf && ./Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-*` --baudrate 57600'
|
||||
resetBoard()
|
||||
}
|
||||
}
|
||||
stage("tests") {
|
||||
steps {
|
||||
runTests()
|
||||
}
|
||||
}
|
||||
stage("status") {
|
||||
steps {
|
||||
// configure
|
||||
resetParameters()
|
||||
sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "SYS_AUTOSTART" --value "13000"' // generic vtol standard
|
||||
sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "SYS_BL_UPDATE" --value "1"' // update bootloader
|
||||
checkStatus()
|
||||
quickCalibrate()
|
||||
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "px4io status"'
|
||||
}
|
||||
}
|
||||
stage("print topics") {
|
||||
steps {
|
||||
printTopics()
|
||||
}
|
||||
}
|
||||
}
|
||||
post {
|
||||
always {
|
||||
sh 'cat /tmp/pyserial_spy_file.txt || true'
|
||||
sh './platforms/nuttx/Debug/jlink_gdb_backtrace_simple.sh build/px4_fmu-v3_test/px4_fmu-v3_test.elf || true'
|
||||
}
|
||||
}
|
||||
} // stage test
|
||||
}
|
||||
}
|
||||
|
||||
stage("px4_fmu-v4_test") {
|
||||
stages {
|
||||
stage("build px4_fmu-v4_test") {
|
||||
@@ -209,12 +271,8 @@ pipeline {
|
||||
resetParameters()
|
||||
sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "SYS_AUTOSTART" --value "4001"' // generic quadcopter
|
||||
sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "SYS_BL_UPDATE" --value "1"' // update bootloader
|
||||
sh './Tools/HIL/reboot.py --device `find /dev/serial -name *usb-*`' // reboot to apply
|
||||
|
||||
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "logger on"' // run logger
|
||||
checkStatus()
|
||||
quickCalibrate()
|
||||
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "logger off"' // stop logger
|
||||
}
|
||||
}
|
||||
stage("print topics") {
|
||||
@@ -282,13 +340,9 @@ pipeline {
|
||||
resetParameters()
|
||||
sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "SYS_AUTOSTART" --value "13000"' // generic vtol standard
|
||||
sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "SYS_BL_UPDATE" --value "1"' // update bootloader
|
||||
sh './Tools/HIL/reboot.py --device `find /dev/serial -name *usb-*`' // reboot to apply
|
||||
|
||||
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "logger on"' // run logger
|
||||
checkStatus()
|
||||
quickCalibrate()
|
||||
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "px4io status"'
|
||||
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "logger off"' // stop logger
|
||||
}
|
||||
}
|
||||
stage("print topics") {
|
||||
@@ -377,7 +431,6 @@ pipeline {
|
||||
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set IMU_GYRO_RATEMAX 200" || true' // limit cpu usage
|
||||
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set MAV_0_CONFIG 0" || true' // limit cpu usage
|
||||
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set MAV_1_CONFIG 0" || true' // limit cpu usage
|
||||
sh './Tools/HIL/reboot.py --device `find /dev/serial -name *usb-*`' // reboot to apply
|
||||
checkStatus()
|
||||
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "px4io status" || true'
|
||||
}
|
||||
@@ -460,7 +513,6 @@ pipeline {
|
||||
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set IMU_GYRO_RATEMAX 200" || true' // limit cpu usage
|
||||
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set MAV_0_CONFIG 0" || true' // limit cpu usage
|
||||
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set MAV_1_CONFIG 0" || true' // limit cpu usage
|
||||
sh './Tools/HIL/reboot.py --device `find /dev/serial -name *usb-*`' // reboot to apply
|
||||
checkStatus()
|
||||
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "px4io status" || true'
|
||||
}
|
||||
@@ -530,13 +582,9 @@ pipeline {
|
||||
resetParameters()
|
||||
sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "SYS_AUTOSTART" --value "4001"' // generic quadcopter
|
||||
sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "SYS_BL_UPDATE" --value "1"' // update bootloader
|
||||
sh './Tools/HIL/reboot.py --device `find /dev/serial -name *usb-*`' // reboot to apply
|
||||
|
||||
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "logger on"' // run logger
|
||||
checkStatus()
|
||||
quickCalibrate()
|
||||
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "px4io status" || true'
|
||||
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "logger off"' // stop logger
|
||||
}
|
||||
}
|
||||
stage("print topics") {
|
||||
@@ -605,12 +653,8 @@ pipeline {
|
||||
sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "IMU_GYRO_RATEMAX" --value "400"'
|
||||
sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "SYS_AUTOSTART" --value "4001"' // generic quadcopter
|
||||
sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "SYS_BL_UPDATE" --value "1"' // update bootloader
|
||||
sh './Tools/HIL/reboot.py --device `find /dev/serial -name *usb-*`' // reboot to apply
|
||||
|
||||
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "logger on"' // run logger
|
||||
checkStatus()
|
||||
quickCalibrate()
|
||||
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "logger off"' // stop logger
|
||||
}
|
||||
}
|
||||
stage("print topics") {
|
||||
@@ -684,8 +728,14 @@ void checkStatus() {
|
||||
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param save"'
|
||||
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param status"'
|
||||
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param show SYS*"'
|
||||
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "bsondump /fs/mtd_params"'
|
||||
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param dump"'
|
||||
sh './Tools/HIL/reboot.py --device `find /dev/serial -name *usb-*`' // reboot to apply
|
||||
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param show SYS*"'
|
||||
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param dump"'
|
||||
|
||||
// run logger
|
||||
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "logger on"'
|
||||
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "sleep 1"' // sleep before continuing
|
||||
// status commands
|
||||
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "cat /proc/fs/blocks"'
|
||||
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "cat /proc/fs/mount"'
|
||||
@@ -715,7 +765,7 @@ void checkStatus() {
|
||||
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "mavlink status" || true'
|
||||
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "mount"'
|
||||
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "mtd status"'
|
||||
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "bsondump /fs/mtd_params"'
|
||||
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param dump"'
|
||||
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param show" || true'
|
||||
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param status"'
|
||||
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "perf latency"'
|
||||
@@ -729,6 +779,8 @@ void checkStatus() {
|
||||
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "uorb top -1 -a" || true'
|
||||
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "ver all"'
|
||||
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "work_queue status"'
|
||||
// stop logger
|
||||
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "logger off"'
|
||||
}
|
||||
|
||||
void resetParameters() {
|
||||
@@ -767,13 +819,13 @@ void runTests() {
|
||||
|
||||
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "tests file" || true'
|
||||
|
||||
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "bsondump /fs/mtd_params"'
|
||||
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param dump /fs/mtd_params"'
|
||||
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "mtd readtest"'
|
||||
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "bsondump /fs/mtd_params"'
|
||||
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param dump /fs/mtd_params"'
|
||||
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "mtd rwtest"'
|
||||
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "bsondump /fs/mtd_params"'
|
||||
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param dump /fs/mtd_params"'
|
||||
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "mtd erase"'
|
||||
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "bsondump /fs/mtd_params" || true' // expected to fail after erase
|
||||
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param dump /fs/mtd_params"'
|
||||
|
||||
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "sd_bench"'
|
||||
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "sd_bench -v"'
|
||||
@@ -868,6 +920,7 @@ void printTopics() {
|
||||
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener tune_control" || true'
|
||||
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener vehicle_acceleration" || true'
|
||||
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener vehicle_air_data" || true'
|
||||
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener vehicle_angular_acceleration" || true'
|
||||
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener vehicle_angular_velocity" || true'
|
||||
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener vehicle_attitude" || true'
|
||||
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener vehicle_attitude_setpoint" || true'
|
||||
@@ -884,7 +937,7 @@ void printTopics() {
|
||||
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener vehicle_odometry" || true'
|
||||
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener vehicle_rates_setpoint" || true'
|
||||
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener vehicle_status" || true'
|
||||
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener failsafe_flags" || true'
|
||||
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener vehicle_status_flags" || true'
|
||||
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener vtol_vehicle_status" || true'
|
||||
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener yaw_estimator_status" || true'
|
||||
}
|
||||
|
||||
@@ -5,7 +5,7 @@ labels: feature-request
|
||||
|
||||
---
|
||||
|
||||
For general questions please use [PX4 Discuss](http://discuss.px4.io/) or Discord (you can find an invite link on this project README).
|
||||
For general questions please use [PX4 Discuss](http://discuss.px4.io/) or Slack (you can find an invite link on this project README).
|
||||
|
||||
## Describe problem solved by the proposed feature
|
||||
A clear and concise description of the problem, if any, this feature will solve. E.g. I'm always frustrated when ...
|
||||
|
||||
@@ -1,29 +1,17 @@
|
||||
<!--
|
||||
Please use [PX4 Discuss](http://discuss.px4.io/) or [Slack](http://slack.px4.io/) to align on pull requests if necessary. You can then open draft pull requests to get early feedback.
|
||||
|
||||
Thank you for your contribution!
|
||||
## Describe problem solved by this pull request
|
||||
A clear and concise description of the problem this proposed change will solve. Or, what it will improve.
|
||||
E.g. For this use case I ran into...
|
||||
|
||||
Get early feedback through
|
||||
- Dronecode Discord: https://discord.gg/dronecode
|
||||
- PX4 Discuss: http://discuss.px4.io/
|
||||
- opening a draft pr and sharing the link
|
||||
## Describe your solution
|
||||
A clear and concise description of what you have implemented.
|
||||
|
||||
-->
|
||||
## Describe possible alternatives
|
||||
A clear and concise description of alternative solutions or features you've considered.
|
||||
|
||||
### Solved Problem
|
||||
When ... I found that ...
|
||||
## Test data / coverage
|
||||
How was it tested? What cases were covered? Logs uploaded to https://review.px4.io/ and screenshots of the important plot parts.
|
||||
|
||||
Fixes #{Github issue ID}
|
||||
|
||||
### Solution
|
||||
- Add ... for ...
|
||||
- Refactor ...
|
||||
|
||||
### Alternatives
|
||||
We could also ...
|
||||
|
||||
### Test coverage
|
||||
- Unit/integration test: ...
|
||||
- Simulation/hardware testing logs: https://review.px4.io/
|
||||
|
||||
### Context
|
||||
Related links, screenshot before/after, video
|
||||
## Additional context
|
||||
Add any other related context or media.
|
||||
|
||||
@@ -23,6 +23,7 @@ jobs:
|
||||
"shellcheck_all",
|
||||
"NO_NINJA_BUILD=1 px4_fmu-v5_default",
|
||||
"NO_NINJA_BUILD=1 px4_sitl_default",
|
||||
"BUILD_MICRORTPS_AGENT=1 px4_sitl_rtps",
|
||||
"airframe_metadata",
|
||||
"module_documentation",
|
||||
"parameters_metadata",
|
||||
|
||||
@@ -54,7 +54,6 @@ jobs:
|
||||
nxp_fmuk66-e,
|
||||
nxp_fmuk66-v3,
|
||||
nxp_fmurt1062-v1,
|
||||
nxp_mr-canhubk3,
|
||||
nxp_ucans32k146,
|
||||
omnibus_f4sd,
|
||||
px4_fmu-v2,
|
||||
|
||||
@@ -1,44 +0,0 @@
|
||||
name: Failsafe Simulator Build
|
||||
|
||||
on:
|
||||
push:
|
||||
branches:
|
||||
- 'main'
|
||||
pull_request:
|
||||
branches:
|
||||
- '*'
|
||||
|
||||
jobs:
|
||||
build:
|
||||
runs-on: ubuntu-latest
|
||||
defaults:
|
||||
run:
|
||||
shell: bash
|
||||
strategy:
|
||||
fail-fast: false
|
||||
matrix:
|
||||
check: [
|
||||
"failsafe_web",
|
||||
]
|
||||
container:
|
||||
image: px4io/px4-dev-nuttx-focal:2021-09-08
|
||||
options: --privileged --ulimit core=-1 --security-opt seccomp=unconfined
|
||||
steps:
|
||||
- uses: actions/checkout@v1
|
||||
with:
|
||||
token: ${{ secrets.ACCESS_TOKEN }}
|
||||
|
||||
- name: check environment
|
||||
run: |
|
||||
export
|
||||
ulimit -a
|
||||
- name: install emscripten
|
||||
run: |
|
||||
git clone https://github.com/emscripten-core/emsdk.git _emscripten_sdk
|
||||
cd _emscripten_sdk
|
||||
./emsdk install latest
|
||||
./emsdk activate latest
|
||||
- name: ${{matrix.check}}
|
||||
run: |
|
||||
. ./_emscripten_sdk/emsdk_env.sh
|
||||
make ${{matrix.check}}
|
||||
@@ -116,7 +116,7 @@ jobs:
|
||||
ls -ls *
|
||||
# TODO: deploy graph_px4_sitl.json to S3 px4-travis:Firmware/master/
|
||||
|
||||
ROS2_msgs:
|
||||
micrortps_agent:
|
||||
runs-on: ubuntu-latest
|
||||
container: px4io/px4-dev-base-focal:2021-09-08
|
||||
steps:
|
||||
@@ -124,8 +124,34 @@ jobs:
|
||||
with:
|
||||
token: ${{ secrets.ACCESS_TOKEN }}
|
||||
|
||||
- name: PX4 ROS2 msgs
|
||||
- name: microRTPS agent
|
||||
run: |
|
||||
make px4_sitl_rtps
|
||||
git clone https://github.com/PX4/micrortps_agent.git
|
||||
cp -R build/px4_sitl_rtps/src/modules/micrortps_bridge/micrortps_agent/* micrortps_agent
|
||||
|
||||
ROS_msgs:
|
||||
runs-on: ubuntu-latest
|
||||
container: px4io/px4-dev-base-focal:2021-09-08
|
||||
steps:
|
||||
- uses: actions/checkout@v1
|
||||
with:
|
||||
token: ${{ secrets.ACCESS_TOKEN }}
|
||||
|
||||
- name: PX4 ROS msgs
|
||||
run: |
|
||||
git clone https://github.com/PX4/px4_msgs.git
|
||||
rm px4_msgs/msg/*.msg
|
||||
cp msg/*.msg px4_msgs/msg/
|
||||
python3 msg/tools/uorb_to_ros_msgs.py msg/ px4_msgs/msg/
|
||||
|
||||
ROS2_bridge:
|
||||
runs-on: ubuntu-latest
|
||||
container: px4io/px4-dev-base-focal:2021-09-08
|
||||
steps:
|
||||
- uses: actions/checkout@v1
|
||||
with:
|
||||
token: ${{ secrets.ACCESS_TOKEN }}
|
||||
|
||||
- name: PX4 ROS2 bridge
|
||||
run: |
|
||||
git clone https://github.com/PX4/px4_ros_com.git
|
||||
./msg/tools/uorb_to_ros_urtps_topics.py -i msg/tools/urtps_bridge_topics.yaml -o px4_ros_com/templates/urtps_bridge_topics.yaml
|
||||
|
||||
@@ -16,7 +16,7 @@ jobs:
|
||||
matrix:
|
||||
config:
|
||||
- {model: "iris", latitude: "59.617693", longitude: "-151.145316", altitude: "48", build_type: "RelWithDebInfo" } # Alaska
|
||||
# - {model: "standard_vtol", latitude: "-38.071235", longitude: "145.281220", altitude: "31", build_type: "AddressSanitizer" } # Australia
|
||||
- {model: "standard_vtol", latitude: "-38.071235", longitude: "145.281220", altitude: "31", build_type: "AddressSanitizer" } # Australia
|
||||
- {model: "tailsitter" , latitude: "29.660316", longitude: "-82.316658", altitude: "30", build_type: "RelWithDebInfo" } # Florida
|
||||
- {model: "standard_vtol", latitude: "47.397742", longitude: "8.545594", altitude: "488", build_type: "Coverage" } # Zurich
|
||||
|
||||
@@ -81,7 +81,7 @@ jobs:
|
||||
env:
|
||||
PX4_CMAKE_BUILD_TYPE: ${{matrix.config.build_type}}
|
||||
DONT_RUN: 1
|
||||
run: make px4_sitl_default sitl_gazebo mavsdk_tests
|
||||
run: make px4_sitl_default gazebo mavsdk_tests
|
||||
- name: ccache post-run mavsdk_tests
|
||||
run: ccache -s
|
||||
|
||||
|
||||
@@ -47,8 +47,6 @@ GTAGS
|
||||
*.files
|
||||
*.includes
|
||||
|
||||
Tools/jlink-nuttx.so
|
||||
|
||||
# CLion ignores
|
||||
.idea
|
||||
cmake-build-*/
|
||||
|
||||
+7
-4
@@ -18,14 +18,18 @@
|
||||
path = src/drivers/gps/devices
|
||||
url = https://github.com/PX4/PX4-GPSDrivers.git
|
||||
branch = main
|
||||
[submodule "src/modules/micrortps_bridge/micro-CDR"]
|
||||
path = src/modules/micrortps_bridge/micro-CDR
|
||||
url = https://github.com/PX4/Micro-CDR.git
|
||||
branch = master
|
||||
[submodule "platforms/nuttx/NuttX/nuttx"]
|
||||
path = platforms/nuttx/NuttX/nuttx
|
||||
url = https://github.com/PX4/NuttX.git
|
||||
branch = px4_firmware_nuttx-10.3.0+
|
||||
branch = px4_firmware_nuttx-10.1.0+
|
||||
[submodule "platforms/nuttx/NuttX/apps"]
|
||||
path = platforms/nuttx/NuttX/apps
|
||||
url = https://github.com/PX4/NuttX-apps.git
|
||||
branch = px4_firmware_nuttx-10.3.0+
|
||||
branch = px4_firmware_nuttx-10.1.0+
|
||||
[submodule "Tools/flightgear_bridge"]
|
||||
path = Tools/simulation/flightgear/flightgear_bridge
|
||||
url = https://github.com/PX4/PX4-FlightGear-Bridge.git
|
||||
@@ -60,5 +64,4 @@
|
||||
branch = px4
|
||||
[submodule "src/modules/microdds_client/Micro-XRCE-DDS-Client"]
|
||||
path = src/modules/microdds_client/Micro-XRCE-DDS-Client
|
||||
url = https://github.com/PX4/Micro-XRCE-DDS-Client.git
|
||||
branch = px4
|
||||
url = https://github.com/eProsima/Micro-XRCE-DDS-Client.git
|
||||
|
||||
Vendored
+3
-3
@@ -6,11 +6,11 @@ CONFIG:
|
||||
buildType: RelWithDebInfo
|
||||
settings:
|
||||
CONFIG: px4_sitl_default
|
||||
px4_sitl_nolockstep:
|
||||
short: px4_sitl_nolockstep
|
||||
px4_sitl_rtps:
|
||||
short: px4_sitl_rtps
|
||||
buildType: RelWithDebInfo
|
||||
settings:
|
||||
CONFIG: px4_sitl_nolockstep
|
||||
CONFIG: px4_sitl_rtps
|
||||
px4_sitl_asan:
|
||||
short: px4_sitl (AddressSanitizer)
|
||||
buildType: AddressSanitizer
|
||||
|
||||
Vendored
+3
-4
@@ -119,9 +119,7 @@
|
||||
"utility": "cpp",
|
||||
"valarray": "cpp",
|
||||
"variant": "cpp",
|
||||
"vector": "cpp",
|
||||
"Jenkinsfile*": "groovy",
|
||||
"*.sdf": "xml"
|
||||
"vector": "cpp"
|
||||
},
|
||||
"search.exclude": {
|
||||
"${workspaceFolder}/build": true
|
||||
@@ -135,5 +133,6 @@
|
||||
"workbench.settings.enableNaturalLanguageSearch": false,
|
||||
"yaml.schemas": {
|
||||
"${workspaceFolder}/validation/module_schema.yaml": "${workspaceFolder}/src/modules/*/module.yaml"
|
||||
}
|
||||
},
|
||||
"cortex-debug.openocdPath": "${env:PICO_SDK_PATH}/../openocd/src/openocd" // Added for rp2040
|
||||
}
|
||||
|
||||
Vendored
+43
@@ -49,6 +49,49 @@
|
||||
"group": "test"
|
||||
}
|
||||
},
|
||||
{
|
||||
"label": "jmavsim build",
|
||||
"type": "shell",
|
||||
"command": "ant create_run_jar copy_res",
|
||||
"options": {
|
||||
"cwd": "${workspaceFolder}/Tools/simulation/jmavsim/jMAVSim"
|
||||
},
|
||||
"presentation": {
|
||||
"echo": true,
|
||||
"reveal": "never",
|
||||
"revealProblems": "onProblem",
|
||||
"focus": false,
|
||||
"panel": "dedicated",
|
||||
"showReuseMessage": false,
|
||||
"clear": false,
|
||||
"close": true
|
||||
},
|
||||
"problemMatcher": []
|
||||
},
|
||||
{
|
||||
"label": "jmavsim",
|
||||
"type": "shell",
|
||||
"dependsOn": "jmavsim build",
|
||||
"command": "java -Djava.ext.dirs= -jar jmavsim_run.jar -r 250 -lockstep -tcp localhost:4560 -qgc",
|
||||
"options": {
|
||||
"cwd": "${workspaceFolder}/Tools/simulation/jmavsim/jMAVSim/out/production",
|
||||
"env": {
|
||||
"PX4_SIM_SPEED_FACTOR": "1"
|
||||
}
|
||||
},
|
||||
"isBackground": true,
|
||||
"presentation": {
|
||||
"echo": true,
|
||||
"reveal": "never",
|
||||
"revealProblems": "onProblem",
|
||||
"focus": false,
|
||||
"panel": "dedicated",
|
||||
"showReuseMessage": false,
|
||||
"clear": false,
|
||||
"close": true
|
||||
},
|
||||
"problemMatcher": []
|
||||
},
|
||||
{
|
||||
"label": "jmavsim kill",
|
||||
"type": "shell",
|
||||
|
||||
+56
-26
@@ -1,6 +1,6 @@
|
||||
############################################################################
|
||||
#
|
||||
# Copyright (c) 2017 - 2022 PX4 Development Team. All rights reserved.
|
||||
# Copyright (c) 2017 - 2019 PX4 Development Team. All rights reserved.
|
||||
#
|
||||
# Redistribution and use in source and binary forms, with or without
|
||||
# modification, are permitted provided that the following conditions
|
||||
@@ -143,17 +143,25 @@ define_property(GLOBAL PROPERTY PX4_SRC_FILES
|
||||
# configuration
|
||||
#
|
||||
|
||||
set(CONFIG "px4_sitl_default" CACHE STRING "desired configuration")
|
||||
|
||||
include(px4_add_module)
|
||||
set(config_module_list)
|
||||
set(config_kernel_list)
|
||||
|
||||
# Find Python
|
||||
find_package(PythonInterp 3)
|
||||
# We have a custom error message to tell users how to install python3.
|
||||
if(NOT PYTHONINTERP_FOUND)
|
||||
message(FATAL_ERROR "Python 3 not found. Please install Python 3:\n"
|
||||
" Ubuntu: sudo apt install python3 python3-dev python3-pip\n"
|
||||
" macOS: brew install python")
|
||||
# If using catkin, Python 2 is found since it points
|
||||
# to the Python libs installed with the ROS distro
|
||||
if (NOT CATKIN_DEVEL_PREFIX)
|
||||
find_package(PythonInterp 3)
|
||||
# We have a custom error message to tell users how to install python3.
|
||||
if (NOT PYTHONINTERP_FOUND)
|
||||
message(FATAL_ERROR "Python 3 not found. Please install Python 3:\n"
|
||||
" Ubuntu: sudo apt install python3 python3-dev python3-pip\n"
|
||||
" macOS: brew install python")
|
||||
endif()
|
||||
else()
|
||||
find_package(PythonInterp REQUIRED)
|
||||
endif()
|
||||
|
||||
option(PYTHON_COVERAGE "Python code coverage" OFF)
|
||||
@@ -199,11 +207,6 @@ if(EXISTS "${PX4_SOURCE_DIR}/platforms/${PX4_PLATFORM}/cmake/init.cmake")
|
||||
include(init)
|
||||
endif()
|
||||
|
||||
#=============================================================================
|
||||
# project definition
|
||||
#
|
||||
project(px4 CXX C ASM)
|
||||
|
||||
# CMake build type (Debug Release RelWithDebInfo MinSizeRel Coverage)
|
||||
if(NOT CMAKE_BUILD_TYPE)
|
||||
if(${PX4_PLATFORM} STREQUAL "nuttx")
|
||||
@@ -232,6 +235,11 @@ endif()
|
||||
set_property(CACHE CMAKE_BUILD_TYPE PROPERTY STRINGS "Debug;Release;RelWithDebInfo;MinSizeRel;Coverage;AddressSanitizer;UndefinedBehaviorSanitizer")
|
||||
message(STATUS "cmake build type: ${CMAKE_BUILD_TYPE}")
|
||||
|
||||
#=============================================================================
|
||||
# project definition
|
||||
#
|
||||
project(px4 CXX C ASM)
|
||||
|
||||
# Check if LTO option and check if toolchain supports it
|
||||
if(LTO)
|
||||
include(CheckIPOSupported)
|
||||
@@ -248,9 +256,15 @@ set(CMAKE_C_STANDARD 11)
|
||||
set(CMAKE_C_STANDARD_REQUIRED ON)
|
||||
set(CMAKE_EXPORT_COMPILE_COMMANDS ON)
|
||||
|
||||
set(CMAKE_RUNTIME_OUTPUT_DIRECTORY ${PX4_BINARY_DIR})
|
||||
set(CMAKE_RUNTIME_OUTPUT_DIRECTORY_DEBUG ${PX4_BINARY_DIR})
|
||||
set(CMAKE_RUNTIME_OUTPUT_DIRECTORY_RELEASE ${PX4_BINARY_DIR})
|
||||
# For the catkin build process, unset build of dynamically-linked binaries
|
||||
# and do not change CMAKE_RUNTIME_OUTPUT_DIRECTORY
|
||||
if (NOT CATKIN_DEVEL_PREFIX)
|
||||
set(CMAKE_RUNTIME_OUTPUT_DIRECTORY ${PX4_BINARY_DIR})
|
||||
set(CMAKE_RUNTIME_OUTPUT_DIRECTORY_DEBUG ${PX4_BINARY_DIR})
|
||||
set(CMAKE_RUNTIME_OUTPUT_DIRECTORY_RELEASE ${PX4_BINARY_DIR})
|
||||
else()
|
||||
SET(BUILD_SHARED_LIBS OFF)
|
||||
endif()
|
||||
|
||||
#=============================================================================
|
||||
|
||||
@@ -282,10 +296,7 @@ if(${PX4_PLATFORM} STREQUAL "posix")
|
||||
set(CMAKE_POSITION_INDEPENDENT_CODE ON)
|
||||
set(CMAKE_ENABLE_EXPORTS ON)
|
||||
|
||||
if(CMAKE_BUILD_TYPE MATCHES "Coverage")
|
||||
include(coverage)
|
||||
endif()
|
||||
|
||||
include(coverage)
|
||||
include(sanitizers)
|
||||
|
||||
# Define GNU standard installation directories
|
||||
@@ -298,6 +309,21 @@ endif()
|
||||
|
||||
include(ccache)
|
||||
|
||||
#=============================================================================
|
||||
# find programs and packages
|
||||
#
|
||||
|
||||
# see if catkin was invoked to build this
|
||||
if (CATKIN_DEVEL_PREFIX)
|
||||
message(STATUS "catkin ENABLED")
|
||||
find_package(catkin REQUIRED)
|
||||
if (catkin_FOUND)
|
||||
catkin_package()
|
||||
else()
|
||||
message(FATAL_ERROR "catkin not found")
|
||||
endif()
|
||||
endif()
|
||||
|
||||
#=============================================================================
|
||||
# get chip and chip manufacturer
|
||||
#
|
||||
@@ -424,10 +450,10 @@ add_subdirectory(src/lib/metadata EXCLUDE_FROM_ALL)
|
||||
add_subdirectory(src/lib/parameters EXCLUDE_FROM_ALL)
|
||||
|
||||
if(${PX4_PLATFORM} STREQUAL "nuttx" AND NOT CONFIG_BUILD_FLAT)
|
||||
target_link_libraries(parameters_interface INTERFACE usr_parameters)
|
||||
target_link_libraries(kernel_parameters_interface INTERFACE parameters)
|
||||
target_link_libraries(parameters_interface INTERFACE usr_parameters)
|
||||
target_link_libraries(kernel_parameters_interface INTERFACE parameters)
|
||||
else()
|
||||
target_link_libraries(parameters_interface INTERFACE parameters)
|
||||
target_link_libraries(parameters_interface INTERFACE parameters)
|
||||
endif()
|
||||
|
||||
# firmware added last to generate the builtin for included modules
|
||||
@@ -460,13 +486,17 @@ include(doxygen)
|
||||
include(metadata)
|
||||
include(package)
|
||||
|
||||
# print size
|
||||
add_custom_target(size
|
||||
COMMAND size $<TARGET_FILE:px4>
|
||||
DEPENDS px4
|
||||
WORKING_DIRECTORY ${PX4_BINARY_DIR}
|
||||
USES_TERMINAL
|
||||
)
|
||||
|
||||
# install python requirements using configured python
|
||||
add_custom_target(install_python_requirements
|
||||
COMMAND ${PYTHON_EXECUTABLE} -m pip install --requirement ${PX4_SOURCE_DIR}/Tools/setup/requirements.txt
|
||||
DEPENDS ${PX4_SOURCE_DIR}/Tools/setup/requirements.txt
|
||||
USES_TERMINAL
|
||||
)
|
||||
|
||||
if(EXISTS "${PX4_SOURCE_DIR}/platforms/${PX4_PLATFORM}/cmake/finalize.cmake")
|
||||
include(finalize)
|
||||
endif()
|
||||
|
||||
@@ -829,6 +829,7 @@ RECURSIVE = YES
|
||||
# run.
|
||||
|
||||
EXCLUDE = @CMAKE_SOURCE_DIR@/src/modules/uavcan/libuavcan \
|
||||
@CMAKE_SOURCE_DIR@/src/modules/micrortps_bridge/micro-CDR \
|
||||
@CMAKE_SOURCE_DIR@/src/examples \
|
||||
@CMAKE_SOURCE_DIR@/src/templates
|
||||
|
||||
|
||||
Vendored
+154
-35
@@ -13,6 +13,76 @@ pipeline {
|
||||
}
|
||||
}
|
||||
parallel {
|
||||
// stage('Catkin build on ROS workspace') {
|
||||
// agent {
|
||||
// docker {
|
||||
// image 'px4io/px4-dev-ros-melodic:2021-08-18'
|
||||
// args '-e CCACHE_BASEDIR=$WORKSPACE -v ${CCACHE_DIR}:${CCACHE_DIR}:rw -e HOME=$WORKSPACE'
|
||||
// }
|
||||
// }
|
||||
// steps {
|
||||
// sh 'ls -l'
|
||||
// sh '''#!/bin/bash -l
|
||||
// echo $0;
|
||||
// mkdir -p catkin_ws/src;
|
||||
// cd catkin_ws;
|
||||
// git -C ${WORKSPACE}/catkin_ws/src/Firmware submodule update --init --recursive --force Tools/simulation/gazebo/sitl_gazebo
|
||||
// git clone --recursive ${WORKSPACE}/catkin_ws/src/Firmware/Tools/simulation/gazebo/sitl_gazebo src/mavlink_sitl_gazebo;
|
||||
// git -C ${WORKSPACE}/catkin_ws/src/Firmware fetch --tags;
|
||||
// source /opt/ros/melodic/setup.bash;
|
||||
// export PYTHONPATH=/opt/ros/$ROS_DISTRO/lib/python2.7/dist-packages:/usr/lib/python2.7/dist-packages:/usr/local/lib/python2.7/dist-packages;
|
||||
// catkin init;
|
||||
// catkin build -j$(nproc) -l$(nproc);
|
||||
// '''
|
||||
// // test if the binary was correctly installed and runs using 'mavros_posix_sitl.launch'
|
||||
// sh '''#!/bin/bash -l
|
||||
// echo $0;
|
||||
// source catkin_ws/devel/setup.bash;
|
||||
// rostest px4 pub_test.launch;
|
||||
// '''
|
||||
// }
|
||||
// post {
|
||||
// always {
|
||||
// sh 'rm -rf catkin_ws'
|
||||
// }
|
||||
// failure {
|
||||
// archiveArtifacts(allowEmptyArchive: false, artifacts: '.ros/**/*.xml, .ros/**/*.log')
|
||||
// }
|
||||
// }
|
||||
// options {
|
||||
// checkoutToSubdirectory('catkin_ws/src/Firmware')
|
||||
// }
|
||||
// }
|
||||
|
||||
stage('Colcon build on ROS2 workspace') {
|
||||
agent {
|
||||
docker {
|
||||
image 'px4io/px4-dev-ros2-foxy:2021-08-18'
|
||||
args '-e CCACHE_BASEDIR=$WORKSPACE -v ${CCACHE_DIR}:${CCACHE_DIR}:rw -e HOME=$WORKSPACE'
|
||||
}
|
||||
}
|
||||
steps {
|
||||
sh 'ls -l'
|
||||
sh '''#!/bin/bash -l
|
||||
echo $0;
|
||||
unset ROS_DISTRO;
|
||||
mkdir -p colcon_ws/src;
|
||||
cd colcon_ws;
|
||||
git -C ${WORKSPACE}/colcon_ws/src/Firmware submodule update --init --recursive --force Tools/simulation/gazebo/sitl_gazebo;
|
||||
git -C ${WORKSPACE}/colcon_ws/src/Firmware fetch --tags;
|
||||
source /opt/ros/foxy/setup.sh;
|
||||
colcon build --event-handlers console_direct+ --symlink-install;
|
||||
'''
|
||||
}
|
||||
post {
|
||||
always {
|
||||
sh 'rm -rf colcon_ws'
|
||||
}
|
||||
}
|
||||
options {
|
||||
checkoutToSubdirectory('colcon_ws/src/Firmware')
|
||||
}
|
||||
}
|
||||
|
||||
stage('Airframe') {
|
||||
agent {
|
||||
@@ -79,7 +149,7 @@ pipeline {
|
||||
docker { image 'px4io/px4-dev-base-focal:2021-08-18' }
|
||||
}
|
||||
steps {
|
||||
sh 'mkdir -p build/msg_docs; ./Tools/msg/generate_msg_docs.py -d build/msg_docs'
|
||||
sh 'mkdir -p build/msg_docs; ./msg/tools/generate_msg_docs.py -d build/msg_docs'
|
||||
dir('build') {
|
||||
archiveArtifacts(artifacts: 'msg_docs/*.md')
|
||||
stash includes: 'msg_docs/*.md', name: 'msg_documentation'
|
||||
@@ -92,36 +162,6 @@ pipeline {
|
||||
}
|
||||
}
|
||||
|
||||
stage('failsafe docs') {
|
||||
agent {
|
||||
docker { image 'px4io/px4-dev-nuttx-focal:2021-08-18' }
|
||||
}
|
||||
steps {
|
||||
sh '''#!/bin/bash -l
|
||||
echo $0;
|
||||
git clone https://github.com/emscripten-core/emsdk.git _emscripten_sdk;
|
||||
cd _emscripten_sdk;
|
||||
./emsdk install latest;
|
||||
./emsdk activate latest;
|
||||
cd ..;
|
||||
. ./_emscripten_sdk/emsdk_env.sh;
|
||||
make failsafe_web;
|
||||
cd build/px4_sitl_default_failsafe_web;
|
||||
mkdir -p failsafe_sim;
|
||||
cp index.* parameters.json failsafe_sim;
|
||||
'''
|
||||
dir('build/px4_sitl_default_failsafe_web') {
|
||||
archiveArtifacts(artifacts: 'failsafe_sim/*')
|
||||
stash includes: 'failsafe_sim/*', name: 'failsafe_sim'
|
||||
}
|
||||
}
|
||||
post {
|
||||
always {
|
||||
sh 'make distclean; git clean -ff -x -d .'
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
stage('uORB graphs') {
|
||||
agent {
|
||||
docker {
|
||||
@@ -163,7 +203,6 @@ pipeline {
|
||||
unstash 'metadata_parameters'
|
||||
unstash 'metadata_module_documentation'
|
||||
unstash 'msg_documentation'
|
||||
unstash 'failsafe_sim'
|
||||
unstash 'uorb_graph'
|
||||
withCredentials([usernamePassword(credentialsId: 'px4buildbot_github_personal_token', passwordVariable: 'GIT_PASS', usernameVariable: 'GIT_USER')]) {
|
||||
sh('git clone https://${GIT_USER}:${GIT_PASS}@github.com/PX4/PX4-user_guide.git')
|
||||
@@ -172,7 +211,6 @@ pipeline {
|
||||
sh('cp -R modules/*.md PX4-user_guide/en/modules/')
|
||||
sh('cp -R graph_*.json PX4-user_guide/.vuepress/public/en/middleware/')
|
||||
sh('cp -R msg_docs/*.md PX4-user_guide/en/msg_docs/')
|
||||
sh('cp -R failsafe_sim/* PX4-user_guide/.vuepress/public/en/config/failsafe')
|
||||
sh('cd PX4-user_guide; git status; git add .; git commit -a -m "Update PX4 Firmware metadata `date`" || true')
|
||||
sh('cd PX4-user_guide; git push origin main || true')
|
||||
sh('rm -rf PX4-user_guide')
|
||||
@@ -219,6 +257,37 @@ pipeline {
|
||||
}
|
||||
}
|
||||
|
||||
stage('microRTPS agent') {
|
||||
agent {
|
||||
docker { image 'px4io/px4-dev-base-focal:2021-08-18' }
|
||||
}
|
||||
steps {
|
||||
sh('export')
|
||||
sh('git fetch --all --tags')
|
||||
sh('make distclean; git clean -ff -x -d .')
|
||||
sh('make px4_sitl_rtps')
|
||||
withCredentials([usernamePassword(credentialsId: 'px4buildbot_github_personal_token', passwordVariable: 'GIT_PASS', usernameVariable: 'GIT_USER')]) {
|
||||
sh("git clone https://${GIT_USER}:${GIT_PASS}@github.com/PX4/micrortps_agent.git -b ${BRANCH_NAME}")
|
||||
sh("rm -rf micrortps_agent/src micrortps_agent/idl")
|
||||
sh('cp -R build/px4_sitl_rtps/src/modules/micrortps_bridge/micrortps_agent/* micrortps_agent')
|
||||
sh('cd micrortps_agent; git status; git add src; git commit -a -m "Update microRTPS agent source code `date`" || true')
|
||||
sh('cd micrortps_agent; git push origin ${BRANCH_NAME} || true')
|
||||
sh('cd micrortps_agent; git status; git add idl; git commit -a -m "Update IDL definitions `date`" || true')
|
||||
sh('cd micrortps_agent; git push origin ${BRANCH_NAME} || true')
|
||||
sh('cd micrortps_agent; git status; git add CMakeLists.txt; git commit -a -m "Update CMakeLists.txt `date`" || true')
|
||||
sh('cd micrortps_agent; git push origin ${BRANCH_NAME} || true')
|
||||
sh('rm -rf micrortps_agent')
|
||||
}
|
||||
}
|
||||
when {
|
||||
anyOf {
|
||||
branch 'main'
|
||||
branch 'master' // should be removed, but in case there is something going on...
|
||||
branch 'pr-jenkins' // for testing
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
stage('PX4 ROS msgs') {
|
||||
agent {
|
||||
docker { image 'px4io/px4-dev-base-focal:2021-08-18' }
|
||||
@@ -229,16 +298,66 @@ pipeline {
|
||||
withCredentials([usernamePassword(credentialsId: 'px4buildbot_github_personal_token', passwordVariable: 'GIT_PASS', usernameVariable: 'GIT_USER')]) {
|
||||
sh("git clone https://${GIT_USER}:${GIT_PASS}@github.com/PX4/px4_msgs.git")
|
||||
// 'main' branch
|
||||
sh('rm -f px4_msgs/msg/*.msg')
|
||||
sh('cp msg/*.msg px4_msgs/msg/')
|
||||
sh('./msg/tools/uorb_to_ros_msgs.py msg/ px4_msgs/msg/')
|
||||
sh('cd px4_msgs; git status; git add .; git commit -a -m "Update message definitions `date`" || true')
|
||||
sh('cd px4_msgs; git push origin main || true')
|
||||
// 'ros1' branch
|
||||
sh('cd px4_msgs; git checkout ros1')
|
||||
sh('./msg/tools/uorb_to_ros_msgs.py msg/ px4_msgs/msg/')
|
||||
sh('cd px4_msgs; git status; git add .; git commit -a -m "Update message definitions `date`" || true')
|
||||
sh('cd px4_msgs; git push origin ros1 || true')
|
||||
sh('rm -rf px4_msgs')
|
||||
}
|
||||
}
|
||||
when {
|
||||
anyOf {
|
||||
branch 'main'
|
||||
branch 'master' // should be removed, but in case there is something going on...
|
||||
branch 'pr-jenkins' // for testing
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
stage('PX4 ROS2 bridge') {
|
||||
agent {
|
||||
docker { image 'px4io/px4-dev-base-focal:2021-08-18' }
|
||||
}
|
||||
steps {
|
||||
sh('export')
|
||||
sh('make distclean; git clean -ff -x -d .')
|
||||
withCredentials([usernamePassword(credentialsId: 'px4buildbot_github_personal_token', passwordVariable: 'GIT_PASS', usernameVariable: 'GIT_USER')]) {
|
||||
sh("git clone https://${GIT_USER}:${GIT_PASS}@github.com/PX4/px4_ros_com.git -b ${BRANCH_NAME}")
|
||||
// deploy uORB RTPS ID map
|
||||
sh('./msg/tools/uorb_to_ros_urtps_topics.py -i msg/tools/urtps_bridge_topics.yaml -o px4_ros_com/templates/urtps_bridge_topics.yaml')
|
||||
sh('cd px4_ros_com; git status; git add .; git commit -a -m "Update uORB RTPS ID map `date`" || true')
|
||||
sh('cd px4_ros_com; git push origin ${BRANCH_NAME} || true')
|
||||
// deploy uORB RTPS required tools
|
||||
sh('cp msg/tools/uorb_rtps_classifier.py px4_ros_com/scripts/uorb_rtps_classifier.py')
|
||||
sh('cp msg/tools/generate_microRTPS_bridge.py px4_ros_com/scripts/generate_microRTPS_bridge.py')
|
||||
sh('cp msg/tools/px_generate_uorb_topic_files.py px4_ros_com/scripts/px_generate_uorb_topic_files.py')
|
||||
sh('cp msg/tools/px_generate_uorb_topic_helper.py px4_ros_com/scripts/px_generate_uorb_topic_helper.py')
|
||||
// deploy templates
|
||||
sh('cp msg/templates/urtps/microRTPS_agent.cpp.em px4_ros_com/templates/microRTPS_agent.cpp.em')
|
||||
sh('cp msg/templates/urtps/microRTPS_timesync.cpp.em px4_ros_com/templates/microRTPS_timesync.cpp.em')
|
||||
sh('cp msg/templates/urtps/microRTPS_timesync.h.em px4_ros_com/templates/microRTPS_timesync.h.em')
|
||||
sh('cp msg/templates/urtps/microRTPS_transport.cpp px4_ros_com/templates/microRTPS_transport.cpp')
|
||||
sh('cp msg/templates/urtps/microRTPS_transport.h px4_ros_com/templates/microRTPS_transport.h')
|
||||
sh('cp msg/templates/urtps/Publisher.cpp.em px4_ros_com/templates/Publisher.cpp.em')
|
||||
sh('cp msg/templates/urtps/Publisher.h.em px4_ros_com/templates/Publisher.h.em')
|
||||
sh('cp msg/templates/urtps/Subscriber.cpp.em px4_ros_com/templates/Subscriber.cpp.em')
|
||||
sh('cp msg/templates/urtps/Subscriber.h.em px4_ros_com/templates/Subscriber.h.em')
|
||||
sh('cp msg/templates/urtps/RtpsTopics.cpp.em px4_ros_com/templates/RtpsTopics.cpp.em')
|
||||
sh('cp msg/templates/urtps/RtpsTopics.h.em px4_ros_com/templates/RtpsTopics.h.em')
|
||||
sh('cd px4_ros_com; git status; git add .; git commit -a -m "Update uORB RTPS script tools `date`" || true')
|
||||
sh('cd px4_ros_com; git push origin ${BRANCH_NAME} || true')
|
||||
sh('rm -rf px4_msgs')
|
||||
}
|
||||
}
|
||||
when {
|
||||
anyOf {
|
||||
branch 'main'
|
||||
branch 'master' // should be removed, but in case there is something going on...
|
||||
branch 'pr-jenkins' // for testing
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
@@ -17,8 +17,6 @@ menu "Toolchain"
|
||||
bool "posix"
|
||||
config PLATFORM_QURT
|
||||
bool "qurt"
|
||||
config PLATFORM_ROS2
|
||||
bool "ros2"
|
||||
endchoice
|
||||
|
||||
config BOARD_PLATFORM
|
||||
@@ -26,7 +24,6 @@ menu "Toolchain"
|
||||
default "nuttx" if PLATFORM_NUTTX
|
||||
default "posix" if PLATFORM_POSIX
|
||||
default "qurt" if PLATFORM_QURT
|
||||
default "ros2" if PLATFORM_ROS2
|
||||
|
||||
config BOARD_LOCKSTEP
|
||||
bool "Force enable lockstep"
|
||||
@@ -40,8 +37,8 @@ menu "Toolchain"
|
||||
help
|
||||
forces nolockstep behaviour, despite REPLAY env variable
|
||||
|
||||
config BOARD_LINUX_TARGET
|
||||
bool "Linux OS Target"
|
||||
config BOARD_LINUX
|
||||
bool "Linux OS"
|
||||
depends on PLATFORM_POSIX
|
||||
help
|
||||
Board Platform is running the Linux operating system
|
||||
@@ -174,8 +171,8 @@ menu "Serial ports"
|
||||
config BOARD_SERIAL_WIFI
|
||||
string "WIFI tty port"
|
||||
|
||||
config BOARD_SERIAL_EXT2
|
||||
string "EXT2 tty port"
|
||||
config BOARD_SERIAL_PPB
|
||||
string "PPB (Pixhawk Payload Bus) tty port"
|
||||
endmenu
|
||||
|
||||
menu "drivers"
|
||||
@@ -193,8 +190,3 @@ endmenu
|
||||
menu "examples"
|
||||
source "src/examples/Kconfig"
|
||||
endmenu
|
||||
|
||||
menu "platforms"
|
||||
depends on PLATFORM_QURT || PLATFORM_POSIX
|
||||
source "platforms/common/Kconfig"
|
||||
endmenu
|
||||
|
||||
@@ -172,6 +172,11 @@ ifdef PYTHON_EXECUTABLE
|
||||
override CMAKE_ARGS += -DPYTHON_EXECUTABLE=${PYTHON_EXECUTABLE}
|
||||
endif
|
||||
|
||||
# Check if the microRTPS agent is to be built
|
||||
ifdef BUILD_MICRORTPS_AGENT
|
||||
override CMAKE_ARGS += -DBUILD_MICRORTPS_AGENT=ON
|
||||
endif
|
||||
|
||||
# Functions
|
||||
# --------------------------------------------------------------------
|
||||
# describe how to build a cmake config
|
||||
@@ -248,7 +253,7 @@ endef
|
||||
# Other targets
|
||||
# --------------------------------------------------------------------
|
||||
|
||||
.PHONY: qgc_firmware px4fmu_firmware misc_qgc_extra_firmware
|
||||
.PHONY: qgc_firmware px4fmu_firmware misc_qgc_extra_firmware check_rtps
|
||||
|
||||
# QGroundControl flashable NuttX firmware
|
||||
qgc_firmware: px4fmu_firmware misc_qgc_extra_firmware
|
||||
@@ -273,7 +278,15 @@ misc_qgc_extra_firmware: \
|
||||
check_airmind_mindpx-v2_default \
|
||||
sizes
|
||||
|
||||
.PHONY: sizes check quick_check uorb_graphs
|
||||
# builds with RTPS
|
||||
check_rtps: \
|
||||
check_px4_fmu-v3_rtps \
|
||||
check_px4_fmu-v4_rtps \
|
||||
check_px4_fmu-v4pro_rtps \
|
||||
check_px4_sitl_rtps \
|
||||
sizes
|
||||
|
||||
.PHONY: sizes check quick_check check_rtps uorb_graphs
|
||||
|
||||
sizes:
|
||||
@-find build -name *.elf -type f | xargs size 2> /dev/null || :
|
||||
@@ -324,10 +337,6 @@ px4io_update:
|
||||
cp build/cubepilot_io-v2_default/cubepilot_io-v2_default.bin boards/cubepilot/cubeyellow/extras/cubepilot_io-v2_default.bin
|
||||
git status
|
||||
|
||||
jlink-nuttx:
|
||||
$(CC) -shared -fPIC platforms/nuttx/NuttX/nuttx/tools/jlink-nuttx.c -o Tools/jlink-nuttx.so
|
||||
|
||||
|
||||
bootloaders_update: ark_fmu-v6x_bootloader cuav_nora_bootloader cuav_x7pro_bootloader cubepilot_cubeorange_bootloader holybro_durandal-v1_bootloader holybro_kakuteh7_bootloader matek_h743_bootloader matek_h743-mini_bootloader matek_h743-slim_bootloader modalai_fc-v2_bootloader mro_ctrl-zero-classic_bootloader mro_ctrl-zero-h7_bootloader mro_ctrl-zero-h7-oem_bootloader mro_pixracerpro_bootloader px4_fmu-v6c_bootloader px4_fmu-v6u_bootloader px4_fmu-v6x_bootloader
|
||||
git status
|
||||
|
||||
@@ -486,9 +495,7 @@ shellcheck_all:
|
||||
|
||||
validate_module_configs:
|
||||
@find "$(SRC_DIR)"/src/modules "$(SRC_DIR)"/src/drivers "$(SRC_DIR)"/src/lib -name *.yaml -type f \
|
||||
-not -path "$(SRC_DIR)/src/lib/mixer_module/*" \
|
||||
-not -path "$(SRC_DIR)/src/modules/microdds_client/dds_topics.yaml" \
|
||||
-not -path "$(SRC_DIR)/src/lib/crypto/libtommath/*" -print0 | \
|
||||
-not -path "$(SRC_DIR)/src/lib/mixer_module/*" -not -path "$(SRC_DIR)/src/lib/crypto/libtommath/*" -print0 | \
|
||||
xargs -0 "$(SRC_DIR)"/Tools/validate_yaml.py --schema-file "$(SRC_DIR)"/validation/module_schema.yaml
|
||||
|
||||
# Cleanup
|
||||
@@ -554,20 +561,17 @@ check_px4: $(call make_list,nuttx,"px4") \
|
||||
check_nxp: $(call make_list,nuttx,"nxp") \
|
||||
sizes
|
||||
|
||||
# helpers for running olddefconfig (nuttx) and px4_savedefconfig on all boards
|
||||
.PHONY: all_oldconfig all_px4_savedefconfig
|
||||
all_oldconfig:
|
||||
@for targ in $(ALL_CONFIG_TARGETS); do $(MAKE) $$targ oldconfig; done
|
||||
ifneq ($(ROS2_WS_DIR),)
|
||||
ROS2_WS_DIR := $(basename ${ROS2_WS_DIR})
|
||||
else
|
||||
ROS2_WS_DIR := ~/colcon_ws
|
||||
endif
|
||||
|
||||
all_px4_savedefconfig:
|
||||
@for targ in $(ALL_CONFIG_TARGETS); do $(MAKE) $$targ px4_savedefconfig; done
|
||||
update_ros2_bridge:
|
||||
@Tools/update_px4_ros2_bridge.sh --ws_dir ${ROS2_WS_DIR} --all
|
||||
|
||||
.PHONY: failsafe_web run_failsafe_web_server
|
||||
failsafe_web:
|
||||
@if ! command -v emcc; then echo -e "Install emscripten first: https://emscripten.org/docs/getting_started/downloads.html\nAnd source the env: source <path>/emsdk_env.sh"; exit 1; fi
|
||||
@$(MAKE) --no-print-directory px4_sitl_default failsafe_test parameters_xml \
|
||||
PX4_CMAKE_BUILD_TYPE=Release BUILD_DIR_SUFFIX=_failsafe_web \
|
||||
CMAKE_ARGS="-DCMAKE_CXX_COMPILER=em++ -DCMAKE_C_COMPILER=emcc"
|
||||
run_failsafe_web_server: failsafe_web
|
||||
@cd build/px4_sitl_default_failsafe_web && \
|
||||
python3 -m http.server
|
||||
update_px4_ros_com:
|
||||
@Tools/update_px4_ros2_bridge.sh --ws_dir ${ROS2_WS_DIR} --px4_ros_com
|
||||
|
||||
update_px4_msgs:
|
||||
@Tools/update_px4_ros2_bridge.sh --ws_dir ${ROS2_WS_DIR} --px4_msgs
|
||||
|
||||
@@ -4,7 +4,7 @@
|
||||
|
||||
[](https://github.com/PX4/PX4-Autopilot/actions?query=workflow%3A%22Nuttx+Targets%22?branch=master) [](https://github.com/PX4/PX4-Autopilot/actions?query=workflow%3A%22SITL+Tests%22)
|
||||
|
||||
[](https://discord.gg/dronecode)
|
||||
[](https://join.slack.com/t/px4/shared_invite/zt-si4xo5qs-R4baYFmMjlrT4rQK5yUnaA)
|
||||
|
||||
This repository holds the [PX4](http://px4.io) flight control solution for drones, with the main applications located in the [src/modules](https://github.com/PX4/PX4-Autopilot/tree/main/src/modules) directory. It also contains the PX4 Drone Middleware Platform, which provides drivers and middleware to run drones.
|
||||
|
||||
@@ -75,7 +75,7 @@ The PX4 Dev Team syncs up on a [weekly dev call](https://docs.px4.io/main/en/con
|
||||
* [Paul Riseborough](https://github.com/priseborough)
|
||||
* Vision based navigation and Obstacle Avoidance
|
||||
* [Markus Achtelik](https://github.com/markusachtelik)
|
||||
* DDS/ROS2 Interface
|
||||
* RTPS/ROS2 Interface
|
||||
* [Nuno Marques](https://github.com/TSC21)
|
||||
|
||||
See also [maintainers list](https://px4.io/community/maintainers/) (px4.io) and the [contributors list](https://github.com/PX4/PX4-Autopilot/graphs/contributors) (Github).
|
||||
|
||||
@@ -31,11 +31,6 @@ then
|
||||
set PARAM_FILE /dev/eeeprom0
|
||||
fi
|
||||
|
||||
if mft query -q -k MTD -s MTD_PARAMETERS -v /mnt/qspi/params
|
||||
then
|
||||
set PARAM_FILE /mnt/qspi/params
|
||||
fi
|
||||
|
||||
#
|
||||
# Load parameters.
|
||||
#
|
||||
|
||||
@@ -36,6 +36,7 @@ add_subdirectory(airframes)
|
||||
px4_add_romfs_files(
|
||||
px4-rc.mavlink
|
||||
px4-rc.params
|
||||
px4-rc.rtps
|
||||
px4-rc.simulator
|
||||
rc.replay
|
||||
rcS
|
||||
|
||||
@@ -1,32 +0,0 @@
|
||||
#!/bin/sh
|
||||
#
|
||||
# @name 3DR Iris Quadrotor SITL jMAVSim
|
||||
#
|
||||
# @type Quadrotor Wide
|
||||
#
|
||||
# @maintainer Julian Oes <julian@oes.ch>
|
||||
#
|
||||
|
||||
. ${R}etc/init.d/rc.mc_defaults
|
||||
|
||||
param set-default CA_AIRFRAME 0
|
||||
|
||||
param set-default CA_ROTOR_COUNT 4
|
||||
param set-default CA_ROTOR0_PX 0.1515
|
||||
param set-default CA_ROTOR0_PY 0.245
|
||||
param set-default CA_ROTOR0_KM 0.05
|
||||
param set-default CA_ROTOR1_PX -0.1515
|
||||
param set-default CA_ROTOR1_PY -0.1875
|
||||
param set-default CA_ROTOR1_KM 0.05
|
||||
param set-default CA_ROTOR2_PX 0.1515
|
||||
param set-default CA_ROTOR2_PY -0.245
|
||||
param set-default CA_ROTOR2_KM -0.05
|
||||
param set-default CA_ROTOR3_PX -0.1515
|
||||
param set-default CA_ROTOR3_PY 0.1875
|
||||
param set-default CA_ROTOR3_KM -0.05
|
||||
|
||||
param set-default PWM_MAIN_FUNC1 101
|
||||
param set-default PWM_MAIN_FUNC2 102
|
||||
param set-default PWM_MAIN_FUNC3 103
|
||||
param set-default PWM_MAIN_FUNC4 104
|
||||
|
||||
@@ -1,33 +0,0 @@
|
||||
#!/bin/sh
|
||||
#
|
||||
# @name 3DR Iris Quadrotor SITL (foggy_lidar)
|
||||
#
|
||||
# @type Quadrotor Wide
|
||||
#
|
||||
|
||||
. ${R}etc/init.d/rc.mc_defaults
|
||||
|
||||
|
||||
param set-default CA_AIRFRAME 0
|
||||
|
||||
param set-default CA_ROTOR_COUNT 4
|
||||
param set-default CA_ROTOR0_PX 0.1515
|
||||
param set-default CA_ROTOR0_PY 0.245
|
||||
param set-default CA_ROTOR0_KM 0.05
|
||||
param set-default CA_ROTOR1_PX -0.1515
|
||||
param set-default CA_ROTOR1_PY -0.1875
|
||||
param set-default CA_ROTOR1_KM 0.05
|
||||
param set-default CA_ROTOR2_PX 0.1515
|
||||
param set-default CA_ROTOR2_PY -0.245
|
||||
param set-default CA_ROTOR2_KM -0.05
|
||||
param set-default CA_ROTOR3_PX -0.1515
|
||||
param set-default CA_ROTOR3_PY 0.1875
|
||||
param set-default CA_ROTOR3_KM -0.05
|
||||
|
||||
param set-default PWM_MAIN_FUNC1 101
|
||||
param set-default PWM_MAIN_FUNC2 102
|
||||
param set-default PWM_MAIN_FUNC3 103
|
||||
param set-default PWM_MAIN_FUNC4 104
|
||||
|
||||
param set-default EKF2_RNG_A_HMAX 10
|
||||
|
||||
@@ -0,0 +1,11 @@
|
||||
#!/bin/sh
|
||||
#
|
||||
# @name 3DR Iris Quadrotor SITL (foggy_lidar)
|
||||
#
|
||||
# @type Quadrotor Wide
|
||||
#
|
||||
|
||||
. ${R}etc/init.d-posix/airframes/10016_iris
|
||||
|
||||
param set-default EKF2_RNG_A_HMAX 10
|
||||
|
||||
+1
@@ -41,3 +41,4 @@ param set-default PWM_MAIN_FUNC3 103
|
||||
param set-default PWM_MAIN_FUNC4 104
|
||||
|
||||
param set SIH_VEHICLE_TYPE 0
|
||||
|
||||
+1
-1
@@ -14,7 +14,7 @@ PX4_SIM_MODEL=${PX4_SIM_MODEL:=xvert}
|
||||
param set-default VT_ELEV_MC_LOCK 0
|
||||
param set-default VT_TYPE 0
|
||||
param set-default VT_FW_DIFTHR_EN 1
|
||||
param set-default VT_FW_DIFTHR_S_Y 0.3
|
||||
param set-default VT_FW_DIFTHR_SC 0.3
|
||||
param set-default MPC_MAN_Y_MAX 60
|
||||
param set-default MC_PITCH_P 5
|
||||
|
||||
@@ -1,47 +0,0 @@
|
||||
#!/bin/sh
|
||||
#
|
||||
# @name 3DR Iris Quadrotor SITL (Optical Flow)
|
||||
#
|
||||
# @type Quadrotor Wide
|
||||
#
|
||||
|
||||
. ${R}etc/init.d/rc.mc_defaults
|
||||
|
||||
|
||||
param set-default CA_AIRFRAME 0
|
||||
|
||||
param set-default CA_ROTOR_COUNT 4
|
||||
param set-default CA_ROTOR0_PX 0.1515
|
||||
param set-default CA_ROTOR0_PY 0.245
|
||||
param set-default CA_ROTOR0_KM 0.05
|
||||
param set-default CA_ROTOR1_PX -0.1515
|
||||
param set-default CA_ROTOR1_PY -0.1875
|
||||
param set-default CA_ROTOR1_KM 0.05
|
||||
param set-default CA_ROTOR2_PX 0.1515
|
||||
param set-default CA_ROTOR2_PY -0.245
|
||||
param set-default CA_ROTOR2_KM -0.05
|
||||
param set-default CA_ROTOR3_PX -0.1515
|
||||
param set-default CA_ROTOR3_PY 0.1875
|
||||
param set-default CA_ROTOR3_KM -0.05
|
||||
|
||||
param set-default PWM_MAIN_FUNC1 101
|
||||
param set-default PWM_MAIN_FUNC2 102
|
||||
param set-default PWM_MAIN_FUNC3 103
|
||||
param set-default PWM_MAIN_FUNC4 104
|
||||
|
||||
# EKF2
|
||||
param set-default EKF2_AID_MASK 2
|
||||
param set-default EKF2_GPS_CTRL 0
|
||||
param set-default EKF2_EVP_NOISE 0.05
|
||||
param set-default EKF2_EVA_NOISE 0.05
|
||||
|
||||
# LPE: Flow-only mode
|
||||
param set-default LPE_FUSION 242
|
||||
param set-default LPE_FAKE_ORIGIN 1
|
||||
|
||||
param set-default MPC_ALT_MODE 2
|
||||
|
||||
param set-default SENS_FLOW_ROT 6
|
||||
param set-default SENS_FLOW_MINHGT 0.7
|
||||
param set-default SENS_FLOW_MAXHGT 3.0
|
||||
param set-default SENS_FLOW_MAXR 2.5
|
||||
@@ -0,0 +1,25 @@
|
||||
#!/bin/sh
|
||||
#
|
||||
# @name 3DR Iris Quadrotor SITL (Optical Flow)
|
||||
#
|
||||
# @type Quadrotor Wide
|
||||
#
|
||||
|
||||
. ${R}etc/init.d-posix/airframes/10016_iris
|
||||
|
||||
# EKF2
|
||||
param set-default EKF2_AID_MASK 2
|
||||
param set-default EKF2_GPS_CTRL 0
|
||||
param set-default EKF2_EVP_NOISE 0.05
|
||||
param set-default EKF2_EVA_NOISE 0.05
|
||||
|
||||
# LPE: Flow-only mode
|
||||
param set-default LPE_FUSION 242
|
||||
param set-default LPE_FAKE_ORIGIN 1
|
||||
|
||||
param set-default MPC_ALT_MODE 2
|
||||
|
||||
param set-default SENS_FLOW_ROT 6
|
||||
param set-default SENS_FLOW_MINHGT 0.7
|
||||
param set-default SENS_FLOW_MAXHGT 3.0
|
||||
param set-default SENS_FLOW_MAXR 2.5
|
||||
@@ -1,38 +0,0 @@
|
||||
#!/bin/sh
|
||||
#
|
||||
# @name 3DR Iris Quadrotor SITL (irlock)
|
||||
#
|
||||
# @type Quadrotor Wide
|
||||
#
|
||||
|
||||
. ${R}etc/init.d/rc.mc_defaults
|
||||
|
||||
|
||||
param set-default CA_AIRFRAME 0
|
||||
|
||||
param set-default CA_ROTOR_COUNT 4
|
||||
param set-default CA_ROTOR0_PX 0.1515
|
||||
param set-default CA_ROTOR0_PY 0.245
|
||||
param set-default CA_ROTOR0_KM 0.05
|
||||
param set-default CA_ROTOR1_PX -0.1515
|
||||
param set-default CA_ROTOR1_PY -0.1875
|
||||
param set-default CA_ROTOR1_KM 0.05
|
||||
param set-default CA_ROTOR2_PX 0.1515
|
||||
param set-default CA_ROTOR2_PY -0.245
|
||||
param set-default CA_ROTOR2_KM -0.05
|
||||
param set-default CA_ROTOR3_PX -0.1515
|
||||
param set-default CA_ROTOR3_PY 0.1875
|
||||
param set-default CA_ROTOR3_KM -0.05
|
||||
|
||||
param set-default PWM_MAIN_FUNC1 101
|
||||
param set-default PWM_MAIN_FUNC2 102
|
||||
param set-default PWM_MAIN_FUNC3 103
|
||||
param set-default PWM_MAIN_FUNC4 104
|
||||
|
||||
# enable fusion of landing target velocity
|
||||
param set-default LTEST_MODE 1
|
||||
param set-default PLD_HACC_RAD 0.1
|
||||
param set-default RTL_PLD_MD 2
|
||||
|
||||
# Start up Landing Target Estimator module
|
||||
landing_target_estimator start
|
||||
@@ -0,0 +1,16 @@
|
||||
#!/bin/sh
|
||||
#
|
||||
# @name 3DR Iris Quadrotor SITL (irlock)
|
||||
#
|
||||
# @type Quadrotor Wide
|
||||
#
|
||||
|
||||
. ${R}etc/init.d-posix/airframes/10016_iris
|
||||
|
||||
# enable fusion of landing target velocity
|
||||
param set-default LTEST_MODE 1
|
||||
param set-default PLD_HACC_RAD 0.1
|
||||
param set-default RTL_PLD_MD 2
|
||||
|
||||
# Start up Landing Target Estimator module
|
||||
landing_target_estimator start
|
||||
@@ -1,33 +0,0 @@
|
||||
#!/bin/sh
|
||||
#
|
||||
# @name 3DR Iris Quadrotor SITL (rplidar)
|
||||
#
|
||||
# @type Quadrotor Wide
|
||||
#
|
||||
|
||||
. ${R}etc/init.d/rc.mc_defaults
|
||||
|
||||
|
||||
param set-default CA_AIRFRAME 0
|
||||
|
||||
param set-default CA_ROTOR_COUNT 4
|
||||
param set-default CA_ROTOR0_PX 0.1515
|
||||
param set-default CA_ROTOR0_PY 0.245
|
||||
param set-default CA_ROTOR0_KM 0.05
|
||||
param set-default CA_ROTOR1_PX -0.1515
|
||||
param set-default CA_ROTOR1_PY -0.1875
|
||||
param set-default CA_ROTOR1_KM 0.05
|
||||
param set-default CA_ROTOR2_PX 0.1515
|
||||
param set-default CA_ROTOR2_PY -0.245
|
||||
param set-default CA_ROTOR2_KM -0.05
|
||||
param set-default CA_ROTOR3_PX -0.1515
|
||||
param set-default CA_ROTOR3_PY 0.1875
|
||||
param set-default CA_ROTOR3_KM -0.05
|
||||
|
||||
param set-default PWM_MAIN_FUNC1 101
|
||||
param set-default PWM_MAIN_FUNC2 102
|
||||
param set-default PWM_MAIN_FUNC3 103
|
||||
param set-default PWM_MAIN_FUNC4 104
|
||||
|
||||
param set-default LPE_FUSION 242
|
||||
|
||||
@@ -0,0 +1,11 @@
|
||||
#!/bin/sh
|
||||
#
|
||||
# @name 3DR Iris Quadrotor SITL (rplidar)
|
||||
#
|
||||
# @type Quadrotor Wide
|
||||
#
|
||||
|
||||
. ${R}etc/init.d-posix/airframes/10016_iris
|
||||
|
||||
param set-default LPE_FUSION 242
|
||||
|
||||
-1
@@ -10,7 +10,6 @@
|
||||
# EKF2: Vision position and heading
|
||||
param set-default EKF2_AID_MASK 24
|
||||
param set-default EKF2_EV_DELAY 5
|
||||
param set-default EKF2_EV_CTRL 15
|
||||
param set-default EKF2_GPS_CTRL 0
|
||||
|
||||
# LPE: Vision + baro
|
||||
@@ -1,34 +0,0 @@
|
||||
#!/bin/sh
|
||||
#
|
||||
# @name 3DR Iris Quadrotor SITL (Obstacle Avoidance)
|
||||
#
|
||||
# @type Quadrotor Wide
|
||||
#
|
||||
|
||||
. ${R}etc/init.d/rc.mc_defaults
|
||||
|
||||
|
||||
param set-default CA_AIRFRAME 0
|
||||
|
||||
param set-default CA_ROTOR_COUNT 4
|
||||
param set-default CA_ROTOR0_PX 0.1515
|
||||
param set-default CA_ROTOR0_PY 0.245
|
||||
param set-default CA_ROTOR0_KM 0.05
|
||||
param set-default CA_ROTOR1_PX -0.1515
|
||||
param set-default CA_ROTOR1_PY -0.1875
|
||||
param set-default CA_ROTOR1_KM 0.05
|
||||
param set-default CA_ROTOR2_PX 0.1515
|
||||
param set-default CA_ROTOR2_PY -0.245
|
||||
param set-default CA_ROTOR2_KM -0.05
|
||||
param set-default CA_ROTOR3_PX -0.1515
|
||||
param set-default CA_ROTOR3_PY 0.1875
|
||||
param set-default CA_ROTOR3_KM -0.05
|
||||
|
||||
param set-default PWM_MAIN_FUNC1 101
|
||||
param set-default PWM_MAIN_FUNC2 102
|
||||
param set-default PWM_MAIN_FUNC3 103
|
||||
param set-default PWM_MAIN_FUNC4 104
|
||||
|
||||
param set-default COM_OBS_AVOID 1
|
||||
param set-default MPC_XY_CRUISE 5.0
|
||||
|
||||
@@ -0,0 +1,12 @@
|
||||
#!/bin/sh
|
||||
#
|
||||
# @name 3DR Iris Quadrotor SITL (Obstacle Avoidance)
|
||||
#
|
||||
# @type Quadrotor Wide
|
||||
#
|
||||
|
||||
. ${R}etc/init.d-posix/airframes/10016_iris
|
||||
|
||||
param set-default COM_OBS_AVOID 1
|
||||
param set-default MPC_XY_CRUISE 5.0
|
||||
|
||||
@@ -1,40 +0,0 @@
|
||||
#!/bin/sh
|
||||
#
|
||||
# @name 3DR Iris Quadrotor SITL (Optical Flow)
|
||||
#
|
||||
# @type Quadrotor Wide
|
||||
#
|
||||
|
||||
. ${R}etc/init.d/rc.mc_defaults
|
||||
|
||||
|
||||
param set-default CA_AIRFRAME 0
|
||||
|
||||
param set-default CA_ROTOR_COUNT 4
|
||||
param set-default CA_ROTOR0_PX 0.1515
|
||||
param set-default CA_ROTOR0_PY 0.245
|
||||
param set-default CA_ROTOR0_KM 0.05
|
||||
param set-default CA_ROTOR1_PX -0.1515
|
||||
param set-default CA_ROTOR1_PY -0.1875
|
||||
param set-default CA_ROTOR1_KM 0.05
|
||||
param set-default CA_ROTOR2_PX 0.1515
|
||||
param set-default CA_ROTOR2_PY -0.245
|
||||
param set-default CA_ROTOR2_KM -0.05
|
||||
param set-default CA_ROTOR3_PX -0.1515
|
||||
param set-default CA_ROTOR3_PY 0.1875
|
||||
param set-default CA_ROTOR3_KM -0.05
|
||||
|
||||
param set-default PWM_MAIN_FUNC1 101
|
||||
param set-default PWM_MAIN_FUNC2 102
|
||||
param set-default PWM_MAIN_FUNC3 103
|
||||
param set-default PWM_MAIN_FUNC4 104
|
||||
|
||||
# EKF2
|
||||
param set-default EKF2_AID_MASK 2
|
||||
param set-default EKF2_GPS_CTRL 0
|
||||
|
||||
# LPE: Flow-only mode
|
||||
param set-default LPE_FUSION 242
|
||||
param set-default LPE_FAKE_ORIGIN 1
|
||||
|
||||
param set-default MPC_ALT_MODE 2
|
||||
@@ -0,0 +1,18 @@
|
||||
#!/bin/sh
|
||||
#
|
||||
# @name 3DR Iris Quadrotor SITL (Optical Flow)
|
||||
#
|
||||
# @type Quadrotor Wide
|
||||
#
|
||||
|
||||
. ${R}etc/init.d-posix/airframes/10016_iris
|
||||
|
||||
# EKF2
|
||||
param set-default EKF2_AID_MASK 2
|
||||
param set-default EKF2_GPS_CTRL 0
|
||||
|
||||
# LPE: Flow-only mode
|
||||
param set-default LPE_FUSION 242
|
||||
param set-default LPE_FAKE_ORIGIN 1
|
||||
|
||||
param set-default MPC_ALT_MODE 2
|
||||
@@ -0,0 +1,13 @@
|
||||
#!/bin/sh
|
||||
#
|
||||
# @name 3DR Iris Quadrotor SITL (Vision Velocity)
|
||||
#
|
||||
# @type Quadrotor Wide
|
||||
#
|
||||
|
||||
. ${R}etc/init.d-posix/airframes/10016_iris
|
||||
|
||||
# EKF2: Vision velocity and heading
|
||||
param set-default EKF2_AID_MASK 272
|
||||
param set-default EKF2_EV_DELAY 5
|
||||
param set-default EKF2_GPS_CTRL 0
|
||||
@@ -1,33 +0,0 @@
|
||||
#!/bin/sh
|
||||
#
|
||||
# @name 3DR Iris Quadrotor SITL (Dual GPS)
|
||||
#
|
||||
# @type Quadrotor Wide
|
||||
#
|
||||
|
||||
. ${R}etc/init.d/rc.mc_defaults
|
||||
|
||||
|
||||
param set-default CA_AIRFRAME 0
|
||||
|
||||
param set-default CA_ROTOR_COUNT 4
|
||||
param set-default CA_ROTOR0_PX 0.1515
|
||||
param set-default CA_ROTOR0_PY 0.245
|
||||
param set-default CA_ROTOR0_KM 0.05
|
||||
param set-default CA_ROTOR1_PX -0.1515
|
||||
param set-default CA_ROTOR1_PY -0.1875
|
||||
param set-default CA_ROTOR1_KM 0.05
|
||||
param set-default CA_ROTOR2_PX 0.1515
|
||||
param set-default CA_ROTOR2_PY -0.245
|
||||
param set-default CA_ROTOR2_KM -0.05
|
||||
param set-default CA_ROTOR3_PX -0.1515
|
||||
param set-default CA_ROTOR3_PY 0.1875
|
||||
param set-default CA_ROTOR3_KM -0.05
|
||||
|
||||
param set-default PWM_MAIN_FUNC1 101
|
||||
param set-default PWM_MAIN_FUNC2 102
|
||||
param set-default PWM_MAIN_FUNC3 103
|
||||
param set-default PWM_MAIN_FUNC4 104
|
||||
|
||||
# EKF2: Multi GPS blending
|
||||
param set-default SENS_GPS_MASK 7
|
||||
@@ -0,0 +1,11 @@
|
||||
#!/bin/sh
|
||||
#
|
||||
# @name 3DR Iris Quadrotor SITL (Dual GPS)
|
||||
#
|
||||
# @type Quadrotor Wide
|
||||
#
|
||||
|
||||
. ${R}etc/init.d-posix/airframes/10016_iris
|
||||
|
||||
# EKF2: Multi GPS blending
|
||||
param set-default SENS_GPS_MASK 7
|
||||
@@ -1,75 +0,0 @@
|
||||
#!/bin/sh
|
||||
#
|
||||
# @name Plane SITL
|
||||
#
|
||||
|
||||
. ${R}etc/init.d/rc.fw_defaults
|
||||
|
||||
param set-default EKF2_MAG_ACCLIM 0
|
||||
param set-default EKF2_MAG_YAWLIM 0
|
||||
|
||||
param set-default FW_LND_ANG 8
|
||||
|
||||
param set-default FW_L1_PERIOD 12
|
||||
|
||||
param set-default FW_PR_P 0.9
|
||||
param set-default FW_PR_FF 0.5
|
||||
param set-default FW_PR_I 0.5
|
||||
param set-default TRIM_PITCH -0.15
|
||||
|
||||
param set-default FW_PSP_OFF 2
|
||||
param set-default FW_P_LIM_MIN -15
|
||||
|
||||
param set-default FW_RR_FF 0.5
|
||||
param set-default FW_RR_P 0.3
|
||||
param set-default FW_RR_I 0.5
|
||||
|
||||
param set-default FW_YR_FF 0.5
|
||||
param set-default FW_YR_P 0.6
|
||||
param set-default FW_YR_I 0.5
|
||||
|
||||
param set-default FW_SPOILERS_LND 0.4
|
||||
|
||||
param set-default FW_THR_MAX 0.6
|
||||
param set-default FW_THR_MIN 0.05
|
||||
param set-default FW_THR_TRIM 0.25
|
||||
|
||||
param set-default FW_T_CLMB_MAX 8
|
||||
param set-default FW_T_SINK_MAX 2.7
|
||||
param set-default FW_T_SINK_MIN 2.2
|
||||
|
||||
param set-default FW_W_EN 1
|
||||
|
||||
param set-default MIS_TAKEOFF_ALT 30
|
||||
|
||||
param set-default NAV_ACC_RAD 15
|
||||
param set-default NAV_DLL_ACT 2
|
||||
|
||||
param set-default RWTO_TKOFF 1
|
||||
|
||||
param set-default CA_AIRFRAME 1
|
||||
|
||||
param set-default CA_ROTOR_COUNT 1
|
||||
param set-default CA_ROTOR0_PX 0.3
|
||||
|
||||
param set-default CA_SV_CS_COUNT 6
|
||||
param set-default CA_SV_CS0_TRQ_R -0.5
|
||||
param set-default CA_SV_CS0_TYPE 1
|
||||
param set-default CA_SV_CS1_TRQ_R 0.5
|
||||
param set-default CA_SV_CS1_TYPE 2
|
||||
param set-default CA_SV_CS2_TRQ_P 1.0
|
||||
param set-default CA_SV_CS2_TYPE 3
|
||||
param set-default CA_SV_CS3_TRQ_Y 1.0
|
||||
param set-default CA_SV_CS3_TYPE 4
|
||||
param set-default CA_SV_CS4_TYPE 9
|
||||
param set-default CA_SV_CS5_TYPE 10
|
||||
param set-default PWM_MAIN_FUNC3 204
|
||||
param set-default PWM_MAIN_FUNC4 205
|
||||
param set-default PWM_MAIN_FUNC5 101
|
||||
param set-default PWM_MAIN_FUNC6 201
|
||||
param set-default PWM_MAIN_FUNC7 202
|
||||
param set-default PWM_MAIN_FUNC8 203
|
||||
param set-default PWM_MAIN_FUNC9 206
|
||||
param set-default PWM_MAIN_REV 256
|
||||
|
||||
|
||||
+1
-2
@@ -1,6 +1,6 @@
|
||||
#!/bin/sh
|
||||
#
|
||||
# @name Plane SITL with catapult
|
||||
# @name Plane SITL
|
||||
#
|
||||
|
||||
. ${R}etc/init.d/rc.fw_defaults
|
||||
@@ -74,5 +74,4 @@ param set-default PWM_MAIN_FUNC8 203
|
||||
param set-default PWM_MAIN_FUNC9 206
|
||||
param set-default PWM_MAIN_REV 256
|
||||
|
||||
param set-default RWTO_TKOFF 0
|
||||
|
||||
@@ -1,81 +0,0 @@
|
||||
#!/bin/sh
|
||||
#
|
||||
# @name Plane SITL with camera
|
||||
#
|
||||
|
||||
. ${R}etc/init.d/rc.fw_defaults
|
||||
|
||||
param set-default EKF2_MAG_ACCLIM 0
|
||||
param set-default EKF2_MAG_YAWLIM 0
|
||||
|
||||
param set-default FW_LND_AIRSPD_SC 1
|
||||
param set-default FW_LND_ANG 8
|
||||
|
||||
param set-default FW_L1_PERIOD 12
|
||||
|
||||
param set-default FW_PR_P 0.9
|
||||
param set-default FW_PR_FF 0.5
|
||||
param set-default FW_PR_I 0.5
|
||||
param set-default TRIM_PITCH -0.15
|
||||
|
||||
param set-default FW_PSP_OFF 2
|
||||
param set-default FW_P_LIM_MIN -15
|
||||
|
||||
param set-default FW_RR_FF 0.5
|
||||
param set-default FW_RR_P 0.3
|
||||
param set-default FW_RR_I 0.5
|
||||
|
||||
param set-default FW_YR_FF 0.5
|
||||
param set-default FW_YR_P 0.6
|
||||
param set-default FW_YR_I 0.5
|
||||
|
||||
param set-default FW_SPOILERS_LND 0.4
|
||||
|
||||
param set-default FW_THR_MAX 0.6
|
||||
param set-default FW_THR_MIN 0.05
|
||||
param set-default FW_THR_TRIM 0.25
|
||||
|
||||
param set-default FW_T_CLMB_MAX 8
|
||||
param set-default FW_T_SINK_MAX 2.7
|
||||
param set-default FW_T_SINK_MIN 2.2
|
||||
|
||||
param set-default FW_W_EN 1
|
||||
|
||||
param set-default MIS_LTRMIN_ALT 30
|
||||
param set-default MIS_TAKEOFF_ALT 30
|
||||
|
||||
param set-default NAV_ACC_RAD 15
|
||||
param set-default NAV_DLL_ACT 2
|
||||
|
||||
param set-default RWTO_TKOFF 1
|
||||
|
||||
param set-default CA_AIRFRAME 1
|
||||
|
||||
param set-default CA_ROTOR_COUNT 1
|
||||
param set-default CA_ROTOR0_PX 0.3
|
||||
|
||||
param set-default CA_SV_CS_COUNT 6
|
||||
param set-default CA_SV_CS0_TRQ_R -0.5
|
||||
param set-default CA_SV_CS0_TYPE 1
|
||||
param set-default CA_SV_CS1_TRQ_R 0.5
|
||||
param set-default CA_SV_CS1_TYPE 2
|
||||
param set-default CA_SV_CS2_TRQ_P 1.0
|
||||
param set-default CA_SV_CS2_TYPE 3
|
||||
param set-default CA_SV_CS3_TRQ_Y 1.0
|
||||
param set-default CA_SV_CS3_TYPE 4
|
||||
param set-default CA_SV_CS4_TYPE 9
|
||||
param set-default CA_SV_CS5_TYPE 10
|
||||
param set-default PWM_MAIN_FUNC3 204
|
||||
param set-default PWM_MAIN_FUNC4 205
|
||||
param set-default PWM_MAIN_FUNC5 101
|
||||
param set-default PWM_MAIN_FUNC6 201
|
||||
param set-default PWM_MAIN_FUNC7 202
|
||||
param set-default PWM_MAIN_FUNC8 203
|
||||
param set-default PWM_MAIN_FUNC9 206
|
||||
param set-default PWM_MAIN_REV 256
|
||||
|
||||
# Camera trigger interface is MAVLink
|
||||
param set-default TRIG_INTERFACE 3
|
||||
|
||||
# Distance trigger mode enabled
|
||||
param set-default TRIG_MODE 4
|
||||
@@ -0,0 +1,12 @@
|
||||
#!/bin/sh
|
||||
#
|
||||
# @name Plane SITL with camera
|
||||
#
|
||||
|
||||
. ${R}etc/init.d-posix/airframes/1030_plane
|
||||
|
||||
# Camera trigger interface is MAVLink
|
||||
param set-default TRIG_INTERFACE 3
|
||||
|
||||
# Distance trigger mode enabled
|
||||
param set-default TRIG_MODE 4
|
||||
@@ -0,0 +1,9 @@
|
||||
#!/bin/sh
|
||||
#
|
||||
# @name Plane SITL with catapult
|
||||
#
|
||||
|
||||
. ${R}etc/init.d-posix/airframes/1030_plane
|
||||
|
||||
param set-default RWTO_TKOFF 0
|
||||
|
||||
+1
@@ -63,3 +63,4 @@ param set-default PWM_MAIN_FUNC7 202
|
||||
param set-default PWM_MAIN_FUNC8 203
|
||||
param set-default PWM_MAIN_FUNC9 206
|
||||
param set-default PWM_MAIN_REV 256
|
||||
|
||||
@@ -1,59 +0,0 @@
|
||||
#!/bin/sh
|
||||
#
|
||||
# @name Plane SITL
|
||||
#
|
||||
|
||||
. ${R}etc/init.d/rc.fw_defaults
|
||||
|
||||
param set-default FW_LND_ANG 5
|
||||
param set-default FW_LND_FL_PMIN 9.5
|
||||
param set-default FW_LND_FL_PMAX 20
|
||||
param set-default FW_LND_FLALT 5
|
||||
|
||||
param set-default FW_L1_PERIOD 25
|
||||
|
||||
param set-default FW_PR_FF 0.40
|
||||
param set-default FW_PR_I 0.05
|
||||
param set-default FW_PR_P 0.05
|
||||
|
||||
param set-default FW_R_TC 0.45
|
||||
param set-default FW_RR_FF 0.40
|
||||
param set-default FW_RR_I 0.132
|
||||
param set-default FW_RR_P 0.085
|
||||
|
||||
param set-default FW_W_EN 1
|
||||
|
||||
param set-default MIS_TAKEOFF_ALT 20
|
||||
param set-default MIS_DIST_1WP 2500
|
||||
param set-default MIS_DIST_WPS 10000
|
||||
|
||||
param set-default NAV_ACC_RAD 15
|
||||
param set-default NAV_DLL_ACT 2
|
||||
|
||||
param set-default RWTO_TKOFF 1
|
||||
param set-default RWTO_PSP 8
|
||||
|
||||
param set-default CA_AIRFRAME 1
|
||||
|
||||
param set-default CA_ROTOR_COUNT 1
|
||||
param set-default CA_ROTOR0_PX 0.3
|
||||
|
||||
param set-default CA_SV_CS_COUNT 6
|
||||
param set-default CA_SV_CS0_TRQ_R -0.5
|
||||
param set-default CA_SV_CS0_TYPE 1
|
||||
param set-default CA_SV_CS1_TRQ_R 0.5
|
||||
param set-default CA_SV_CS1_TYPE 2
|
||||
param set-default CA_SV_CS2_TRQ_P 1.0
|
||||
param set-default CA_SV_CS2_TYPE 3
|
||||
param set-default CA_SV_CS3_TRQ_Y 1.0
|
||||
param set-default CA_SV_CS3_TYPE 4
|
||||
param set-default CA_SV_CS4_TYPE 9
|
||||
param set-default CA_SV_CS5_TYPE 10
|
||||
param set-default PWM_MAIN_FUNC3 204
|
||||
param set-default PWM_MAIN_FUNC4 205
|
||||
param set-default PWM_MAIN_FUNC5 101
|
||||
param set-default PWM_MAIN_FUNC6 201
|
||||
param set-default PWM_MAIN_FUNC7 202
|
||||
param set-default PWM_MAIN_FUNC8 203
|
||||
param set-default PWM_MAIN_FUNC9 206
|
||||
param set-default PWM_MAIN_REV 256
|
||||
+6
@@ -5,6 +5,7 @@
|
||||
|
||||
. ${R}etc/init.d/rc.fw_defaults
|
||||
|
||||
param set-default FW_LND_AIRSPD_SC 1.1
|
||||
param set-default FW_LND_ANG 5
|
||||
param set-default FW_LND_FL_PMIN 9.5
|
||||
param set-default FW_LND_FL_PMAX 20
|
||||
@@ -23,6 +24,7 @@ param set-default FW_RR_P 0.085
|
||||
|
||||
param set-default FW_W_EN 1
|
||||
|
||||
param set-default MIS_LTRMIN_ALT 30
|
||||
param set-default MIS_TAKEOFF_ALT 20
|
||||
param set-default MIS_DIST_1WP 2500
|
||||
param set-default MIS_DIST_WPS 10000
|
||||
@@ -31,7 +33,11 @@ param set-default NAV_ACC_RAD 15
|
||||
param set-default NAV_DLL_ACT 2
|
||||
|
||||
param set-default RWTO_TKOFF 1
|
||||
|
||||
param set-default RWTO_MAX_PITCH 20
|
||||
|
||||
param set-default RWTO_PSP 8
|
||||
param set-default RWTO_AIRSPD_SCL 1.8
|
||||
|
||||
param set-default CA_AIRFRAME 1
|
||||
|
||||
+2
@@ -8,6 +8,7 @@
|
||||
param set-default EKF2_MAG_ACCLIM 0
|
||||
param set-default EKF2_MAG_YAWLIM 0
|
||||
|
||||
param set-default FW_LND_AIRSPD_SC 1
|
||||
param set-default FW_LND_ANG 8
|
||||
|
||||
param set-default FW_L1_PERIOD 15
|
||||
@@ -26,6 +27,7 @@ param set-default FW_L1_PERIOD 12
|
||||
|
||||
param set-default FW_W_EN 1
|
||||
|
||||
param set-default MIS_LTRMIN_ALT 30
|
||||
param set-default MIS_TAKEOFF_ALT 30
|
||||
|
||||
param set-default NAV_ACC_RAD 15
|
||||
+4
@@ -5,6 +5,7 @@
|
||||
|
||||
. ${R}etc/init.d/rc.fw_defaults
|
||||
|
||||
param set-default FW_LND_AIRSPD_SC 1.1
|
||||
param set-default FW_LND_ANG 5
|
||||
param set-default FW_LND_FL_PMIN 9.5
|
||||
param set-default FW_LND_FL_PMAX 20
|
||||
@@ -23,6 +24,7 @@ param set-default FW_RR_P 0.085
|
||||
|
||||
param set-default FW_W_EN 1
|
||||
|
||||
param set-default MIS_LTRMIN_ALT 30
|
||||
param set-default MIS_TAKEOFF_ALT 20
|
||||
param set-default MIS_DIST_1WP 2500
|
||||
param set-default MIS_DIST_WPS 10000
|
||||
@@ -31,7 +33,9 @@ param set-default NAV_ACC_RAD 15
|
||||
param set-default NAV_DLL_ACT 2
|
||||
|
||||
param set-default RWTO_TKOFF 1
|
||||
param set-default RWTO_MAX_PITCH 20
|
||||
param set-default RWTO_PSP 8
|
||||
param set-default RWTO_AIRSPD_SCL 1.8
|
||||
|
||||
param set-default CA_AIRFRAME 1
|
||||
|
||||
+4
@@ -8,6 +8,7 @@
|
||||
param set-default EKF2_MAG_ACCLIM 0
|
||||
param set-default EKF2_MAG_YAWLIM 0
|
||||
|
||||
param set-default FW_LND_AIRSPD_SC 1
|
||||
param set-default FW_LND_ANG 8
|
||||
|
||||
param set-default FW_L1_PERIOD 12
|
||||
@@ -33,11 +34,14 @@ param set-default FW_T_TAS_TC 2
|
||||
|
||||
param set-default FW_W_EN 1
|
||||
|
||||
param set-default MIS_LTRMIN_ALT 30
|
||||
param set-default MIS_TAKEOFF_ALT 30
|
||||
|
||||
param set-default NAV_ACC_RAD 15
|
||||
param set-default NAV_DLL_ACT 2
|
||||
|
||||
param set-default FW_USE_NPFG 1
|
||||
|
||||
param set-default RWTO_TKOFF 1
|
||||
|
||||
param set-default CA_AIRFRAME 1
|
||||
@@ -1,78 +0,0 @@
|
||||
#!/bin/sh
|
||||
#
|
||||
# @name Plane SITL with catapult
|
||||
#
|
||||
|
||||
. ${R}etc/init.d/rc.fw_defaults
|
||||
|
||||
param set-default EKF2_MAG_ACCLIM 0
|
||||
param set-default EKF2_MAG_YAWLIM 0
|
||||
|
||||
param set-default FW_LND_AIRSPD_SC 1
|
||||
param set-default FW_LND_ANG 8
|
||||
|
||||
param set-default FW_L1_PERIOD 12
|
||||
|
||||
param set-default FW_PR_P 0.9
|
||||
param set-default FW_PR_FF 0.5
|
||||
param set-default FW_PR_I 0.5
|
||||
param set-default TRIM_PITCH -0.15
|
||||
|
||||
param set-default FW_PSP_OFF 2
|
||||
param set-default FW_P_LIM_MIN -15
|
||||
|
||||
param set-default FW_RR_FF 0.5
|
||||
param set-default FW_RR_P 0.3
|
||||
param set-default FW_RR_I 0.5
|
||||
|
||||
param set-default FW_YR_FF 0.5
|
||||
param set-default FW_YR_P 0.6
|
||||
param set-default FW_YR_I 0.5
|
||||
|
||||
param set-default FW_SPOILERS_LND 0.4
|
||||
|
||||
param set-default FW_THR_MAX 0.6
|
||||
param set-default FW_THR_MIN 0.05
|
||||
param set-default FW_THR_TRIM 0.25
|
||||
|
||||
param set-default FW_T_CLMB_MAX 8
|
||||
param set-default FW_T_SINK_MAX 2.7
|
||||
param set-default FW_T_SINK_MIN 2.2
|
||||
|
||||
param set-default FW_W_EN 1
|
||||
|
||||
param set-default MIS_LTRMIN_ALT 30
|
||||
param set-default MIS_TAKEOFF_ALT 30
|
||||
|
||||
param set-default NAV_ACC_RAD 15
|
||||
param set-default NAV_DLL_ACT 2
|
||||
|
||||
param set-default RWTO_TKOFF 1
|
||||
|
||||
param set-default CA_AIRFRAME 1
|
||||
|
||||
param set-default CA_ROTOR_COUNT 1
|
||||
param set-default CA_ROTOR0_PX 0.3
|
||||
|
||||
param set-default CA_SV_CS_COUNT 6
|
||||
param set-default CA_SV_CS0_TRQ_R -0.5
|
||||
param set-default CA_SV_CS0_TYPE 1
|
||||
param set-default CA_SV_CS1_TRQ_R 0.5
|
||||
param set-default CA_SV_CS1_TYPE 2
|
||||
param set-default CA_SV_CS2_TRQ_P 1.0
|
||||
param set-default CA_SV_CS2_TYPE 3
|
||||
param set-default CA_SV_CS3_TRQ_Y 1.0
|
||||
param set-default CA_SV_CS3_TYPE 4
|
||||
param set-default CA_SV_CS4_TYPE 9
|
||||
param set-default CA_SV_CS5_TYPE 10
|
||||
param set-default PWM_MAIN_FUNC3 204
|
||||
param set-default PWM_MAIN_FUNC4 205
|
||||
param set-default PWM_MAIN_FUNC5 101
|
||||
param set-default PWM_MAIN_FUNC6 201
|
||||
param set-default PWM_MAIN_FUNC7 202
|
||||
param set-default PWM_MAIN_FUNC8 203
|
||||
param set-default PWM_MAIN_FUNC9 206
|
||||
param set-default PWM_MAIN_REV 256
|
||||
|
||||
param set-default FW_THR_TRIM 0.0
|
||||
param set-default RWTO_TKOFF 0
|
||||
@@ -0,0 +1,9 @@
|
||||
#!/bin/sh
|
||||
#
|
||||
# @name Plane SITL with catapult
|
||||
#
|
||||
|
||||
. ${R}etc/init.d-posix/airframes/1030_plane
|
||||
|
||||
param set-default FW_THR_TRIM 0.0
|
||||
param set-default RWTO_TKOFF 0
|
||||
+2
@@ -8,6 +8,7 @@
|
||||
param set-default EKF2_MAG_ACCLIM 0
|
||||
param set-default EKF2_MAG_YAWLIM 0
|
||||
|
||||
param set-default FW_LND_AIRSPD_SC 1
|
||||
param set-default FW_LND_ANG 8
|
||||
param set-default FW_THR_LND_MAX 0
|
||||
|
||||
@@ -30,6 +31,7 @@ param set-default FW_T_SINK_MIN 2.2
|
||||
|
||||
param set-default FW_W_EN 1
|
||||
|
||||
param set-default MIS_LTRMIN_ALT 30
|
||||
param set-default MIS_TAKEOFF_ALT 30
|
||||
|
||||
param set-default NAV_ACC_RAD 15
|
||||
+1
-1
@@ -70,7 +70,7 @@ param set-default MPC_XY_VEL_D_ACC 0.1
|
||||
param set-default NAV_ACC_RAD 5
|
||||
|
||||
param set-default VT_FW_DIFTHR_EN 1
|
||||
param set-default VT_FW_DIFTHR_S_Y 0.5
|
||||
param set-default VT_FW_DIFTHR_SC 0.5
|
||||
param set-default VT_F_TRANS_DUR 1.5
|
||||
param set-default VT_F_TRANS_THR 0.7
|
||||
param set-default VT_TYPE 0
|
||||
@@ -1,93 +0,0 @@
|
||||
#!/bin/sh
|
||||
#
|
||||
# @name Standard VTOL
|
||||
#
|
||||
# @type Standard VTOL
|
||||
#
|
||||
|
||||
. ${R}etc/init.d/rc.vtol_defaults
|
||||
|
||||
# TODO: Enable motor failure detection when the
|
||||
# VTOL no longer reports 0A for all ESCs in SITL
|
||||
param set-default FD_ACT_EN 0
|
||||
param set-default FD_ACT_MOT_TOUT 500
|
||||
|
||||
param set-default CA_AIRFRAME 2
|
||||
|
||||
param set-default CA_ROTOR_COUNT 5
|
||||
param set-default CA_ROTOR0_PX 0.1515
|
||||
param set-default CA_ROTOR0_PY 0.245
|
||||
param set-default CA_ROTOR0_KM 0.05
|
||||
param set-default CA_ROTOR1_PX -0.1515
|
||||
param set-default CA_ROTOR1_PY -0.1875
|
||||
param set-default CA_ROTOR1_KM 0.05
|
||||
param set-default CA_ROTOR2_PX 0.1515
|
||||
param set-default CA_ROTOR2_PY -0.245
|
||||
param set-default CA_ROTOR2_KM -0.05
|
||||
param set-default CA_ROTOR3_PX -0.1515
|
||||
param set-default CA_ROTOR3_PY 0.1875
|
||||
param set-default CA_ROTOR3_KM -0.05
|
||||
param set-default CA_ROTOR4_AX 1.0
|
||||
param set-default CA_ROTOR4_AZ 0.0
|
||||
param set-default CA_ROTOR4_PX 0.2
|
||||
|
||||
param set-default CA_SV_CS_COUNT 3
|
||||
param set-default CA_SV_CS0_TYPE 1
|
||||
param set-default CA_SV_CS0_TRQ_R -0.5
|
||||
param set-default CA_SV_CS1_TYPE 2
|
||||
param set-default CA_SV_CS1_TRQ_R 0.5
|
||||
param set-default CA_SV_CS2_TYPE 3
|
||||
param set-default CA_SV_CS2_TRQ_P 1.0
|
||||
param set-default PWM_MAIN_FUNC1 101
|
||||
param set-default PWM_MAIN_FUNC2 102
|
||||
param set-default PWM_MAIN_FUNC3 103
|
||||
param set-default PWM_MAIN_FUNC4 104
|
||||
param set-default PWM_MAIN_FUNC5 105
|
||||
param set-default PWM_MAIN_FUNC6 201
|
||||
param set-default PWM_MAIN_FUNC7 202
|
||||
param set-default PWM_MAIN_FUNC8 203
|
||||
|
||||
param set-default FW_L1_PERIOD 12
|
||||
param set-default FW_PR_FF 0.2
|
||||
param set-default FW_PR_P 0.9
|
||||
param set-default FW_PSP_OFF 2
|
||||
param set-default FW_P_LIM_MIN -15
|
||||
param set-default FW_RR_FF 0.1
|
||||
param set-default FW_RR_P 0.3
|
||||
param set-default FW_THR_TRIM 0.25
|
||||
param set-default FW_THR_MAX 0.6
|
||||
param set-default FW_THR_MIN 0.05
|
||||
param set-default FW_T_CLMB_MAX 8
|
||||
param set-default FW_T_SINK_MAX 2.7
|
||||
param set-default FW_T_SINK_MIN 2.2
|
||||
|
||||
param set-default MC_ROLLRATE_P 0.3
|
||||
param set-default MC_YAW_P 1.6
|
||||
|
||||
param set-default MIS_TAKEOFF_ALT 10
|
||||
|
||||
param set-default MPC_ACC_HOR_MAX 2
|
||||
param set-default MPC_XY_P 0.8
|
||||
param set-default MPC_XY_VEL_P_ACC 3
|
||||
param set-default MPC_XY_VEL_I_ACC 4
|
||||
param set-default MPC_XY_VEL_D_ACC 0.1
|
||||
|
||||
param set-default NAV_ACC_RAD 5
|
||||
|
||||
param set-default VT_FWD_THRUST_EN 4
|
||||
param set-default VT_F_TRANS_THR 0.75
|
||||
param set-default VT_MOT_ID 1234
|
||||
param set-default VT_FW_MOT_OFFID 1234
|
||||
param set-default VT_B_TRANS_DUR 8
|
||||
param set-default VT_TYPE 2
|
||||
|
||||
|
||||
# Gimbal
|
||||
param set-default PWM_MAIN_FUNC9 420
|
||||
param set-default PWM_MAIN_FUNC10 421
|
||||
param set-default PWM_MAIN_FUNC11 422
|
||||
|
||||
param set-default RC_MAP_AUX1 8
|
||||
param set-default RC_MAP_AUX2 9
|
||||
param set-default RC_MAP_AUX3 10
|
||||
|
||||
@@ -0,0 +1,18 @@
|
||||
#!/bin/sh
|
||||
#
|
||||
# @name Standard VTOL
|
||||
#
|
||||
# @type Standard VTOL
|
||||
#
|
||||
|
||||
. ${R}etc/init.d-posix/airframes/1040_standard_vtol
|
||||
|
||||
# Gimbal
|
||||
param set-default PWM_MAIN_FUNC9 420
|
||||
param set-default PWM_MAIN_FUNC10 421
|
||||
param set-default PWM_MAIN_FUNC11 422
|
||||
|
||||
param set-default RC_MAP_AUX1 8
|
||||
param set-default RC_MAP_AUX2 9
|
||||
param set-default RC_MAP_AUX3 10
|
||||
|
||||
@@ -1,78 +0,0 @@
|
||||
#!/bin/sh
|
||||
#
|
||||
# @name Plane SITL with downward facing LIDAR.
|
||||
#
|
||||
|
||||
. ${R}etc/init.d/rc.fw_defaults
|
||||
|
||||
param set-default EKF2_MAG_ACCLIM 0
|
||||
param set-default EKF2_MAG_YAWLIM 0
|
||||
|
||||
param set-default FW_LND_AIRSPD_SC 1
|
||||
param set-default FW_LND_ANG 8
|
||||
|
||||
param set-default FW_L1_PERIOD 12
|
||||
|
||||
param set-default FW_PR_P 0.9
|
||||
param set-default FW_PR_FF 0.5
|
||||
param set-default FW_PR_I 0.5
|
||||
param set-default TRIM_PITCH -0.15
|
||||
|
||||
param set-default FW_PSP_OFF 2
|
||||
param set-default FW_P_LIM_MIN -15
|
||||
|
||||
param set-default FW_RR_FF 0.5
|
||||
param set-default FW_RR_P 0.3
|
||||
param set-default FW_RR_I 0.5
|
||||
|
||||
param set-default FW_YR_FF 0.5
|
||||
param set-default FW_YR_P 0.6
|
||||
param set-default FW_YR_I 0.5
|
||||
|
||||
param set-default FW_SPOILERS_LND 0.4
|
||||
|
||||
param set-default FW_THR_MAX 0.6
|
||||
param set-default FW_THR_MIN 0.05
|
||||
param set-default FW_THR_TRIM 0.25
|
||||
|
||||
param set-default FW_T_CLMB_MAX 8
|
||||
param set-default FW_T_SINK_MAX 2.7
|
||||
param set-default FW_T_SINK_MIN 2.2
|
||||
|
||||
param set-default FW_W_EN 1
|
||||
|
||||
param set-default MIS_LTRMIN_ALT 30
|
||||
param set-default MIS_TAKEOFF_ALT 30
|
||||
|
||||
param set-default NAV_ACC_RAD 15
|
||||
param set-default NAV_DLL_ACT 2
|
||||
|
||||
param set-default RWTO_TKOFF 1
|
||||
|
||||
param set-default CA_AIRFRAME 1
|
||||
|
||||
param set-default CA_ROTOR_COUNT 1
|
||||
param set-default CA_ROTOR0_PX 0.3
|
||||
|
||||
param set-default CA_SV_CS_COUNT 6
|
||||
param set-default CA_SV_CS0_TRQ_R -0.5
|
||||
param set-default CA_SV_CS0_TYPE 1
|
||||
param set-default CA_SV_CS1_TRQ_R 0.5
|
||||
param set-default CA_SV_CS1_TYPE 2
|
||||
param set-default CA_SV_CS2_TRQ_P 1.0
|
||||
param set-default CA_SV_CS2_TYPE 3
|
||||
param set-default CA_SV_CS3_TRQ_Y 1.0
|
||||
param set-default CA_SV_CS3_TYPE 4
|
||||
param set-default CA_SV_CS4_TYPE 9
|
||||
param set-default CA_SV_CS5_TYPE 10
|
||||
param set-default PWM_MAIN_FUNC3 204
|
||||
param set-default PWM_MAIN_FUNC4 205
|
||||
param set-default PWM_MAIN_FUNC5 101
|
||||
param set-default PWM_MAIN_FUNC6 201
|
||||
param set-default PWM_MAIN_FUNC7 202
|
||||
param set-default PWM_MAIN_FUNC8 203
|
||||
param set-default PWM_MAIN_FUNC9 206
|
||||
param set-default PWM_MAIN_REV 256
|
||||
|
||||
|
||||
param set-default FW_LND_USETER 1
|
||||
@@ -0,0 +1,9 @@
|
||||
#!/bin/sh
|
||||
#
|
||||
# @name Plane SITL with downward facing LIDAR.
|
||||
#
|
||||
|
||||
. ${R}etc/init.d-posix/airframes/1030_plane
|
||||
|
||||
param set-default FW_LND_USETER 1
|
||||
|
||||
+1
@@ -18,6 +18,7 @@ param set-default GND_THR_CRUISE 0.3
|
||||
param set-default GND_THR_MAX 0.5
|
||||
param set-default GND_THR_MIN 0
|
||||
|
||||
param set-default MIS_LTRMIN_ALT 0.01
|
||||
param set-default MIS_TAKEOFF_ALT 0.01
|
||||
param set-default NAV_ACC_RAD 0.5
|
||||
param set-default NAV_LOITER_RAD 2
|
||||
+1
@@ -18,6 +18,7 @@ param set-default GND_THR_CRUISE 0.3
|
||||
param set-default GND_THR_MAX 0.5
|
||||
param set-default GND_THR_MIN 0
|
||||
|
||||
param set-default MIS_LTRMIN_ALT 0.01
|
||||
param set-default MIS_TAKEOFF_ALT 0.01
|
||||
param set-default NAV_ACC_RAD 0.5
|
||||
param set-default NAV_LOITER_RAD 2
|
||||
+1
@@ -25,6 +25,7 @@ param set-default GND_THR_CRUISE 0.3
|
||||
param set-default GND_THR_MAX 0.5
|
||||
param set-default GND_THR_MIN 0
|
||||
|
||||
param set-default MIS_LTRMIN_ALT 0.01
|
||||
param set-default MIS_TAKEOFF_ALT 0.01
|
||||
param set-default NAV_ACC_RAD 0.5
|
||||
param set-default NAV_LOITER_RAD 2
|
||||
+1
@@ -18,6 +18,7 @@ param set-default GND_THR_CRUISE 0.85
|
||||
param set-default GND_THR_MAX 1
|
||||
param set-default GND_THR_MIN 0
|
||||
|
||||
param set-default MIS_LTRMIN_ALT 0.01
|
||||
param set-default MIS_TAKEOFF_ALT 0.01
|
||||
param set-default NAV_ACC_RAD 0.5
|
||||
param set-default NAV_LOITER_RAD 2
|
||||
+1
@@ -20,6 +20,7 @@ param set-default FW_W_EN 1
|
||||
|
||||
param set-default FW_RR_P 0.08
|
||||
|
||||
param set-default MIS_LTRMIN_ALT 50
|
||||
param set-default MIS_TAKEOFF_ALT 3
|
||||
|
||||
param set-default NAV_ACC_RAD 20
|
||||
+1
@@ -20,6 +20,7 @@ param set-default FW_W_EN 1
|
||||
|
||||
param set-default FW_RR_P 0.08
|
||||
|
||||
param set-default MIS_LTRMIN_ALT 50
|
||||
param set-default MIS_TAKEOFF_ALT 7
|
||||
|
||||
param set-default NAV_ACC_RAD 20
|
||||
@@ -1,48 +0,0 @@
|
||||
#!/bin/sh
|
||||
#
|
||||
# @name Gazebo x500 depth
|
||||
#
|
||||
# @type Quadrotor
|
||||
#
|
||||
|
||||
. ${R}etc/init.d/rc.mc_defaults
|
||||
|
||||
PX4_SIMULATOR=${PX4_SIMULATOR:=gz}
|
||||
PX4_GZ_WORLD=${PX4_GZ_WORLD:=default}
|
||||
PX4_SIM_MODEL=${PX4_SIM_MODEL:=x500_depth}
|
||||
|
||||
param set-default CA_AIRFRAME 0
|
||||
param set-default CA_ROTOR_COUNT 4
|
||||
|
||||
param set-default CA_ROTOR0_PX 0.13
|
||||
param set-default CA_ROTOR0_PY 0.22
|
||||
param set-default CA_ROTOR0_KM 0.05
|
||||
|
||||
param set-default CA_ROTOR1_PX -0.13
|
||||
param set-default CA_ROTOR1_PY -0.20
|
||||
param set-default CA_ROTOR1_KM 0.05
|
||||
|
||||
param set-default CA_ROTOR2_PX 0.13
|
||||
param set-default CA_ROTOR2_PY -0.22
|
||||
param set-default CA_ROTOR2_KM -0.05
|
||||
|
||||
param set-default CA_ROTOR3_PX -0.13
|
||||
param set-default CA_ROTOR3_PY 0.20
|
||||
param set-default CA_ROTOR3_KM -0.05
|
||||
|
||||
param set-default SIM_GZ_FUNC1 101
|
||||
param set-default SIM_GZ_FUNC2 102
|
||||
param set-default SIM_GZ_FUNC3 103
|
||||
param set-default SIM_GZ_FUNC4 104
|
||||
|
||||
param set-default SIM_GZ_MIN1 150
|
||||
param set-default SIM_GZ_MIN2 150
|
||||
param set-default SIM_GZ_MIN3 150
|
||||
param set-default SIM_GZ_MIN4 150
|
||||
|
||||
param set-default SIM_GZ_MAX1 1000
|
||||
param set-default SIM_GZ_MAX2 1000
|
||||
param set-default SIM_GZ_MAX3 1000
|
||||
param set-default SIM_GZ_MAX4 1000
|
||||
|
||||
param set-default MPC_THR_HOVER 0.60
|
||||
@@ -1,6 +1,6 @@
|
||||
############################################################################
|
||||
#
|
||||
# Copyright (c) 2020-2023 PX4 Development Team. All rights reserved.
|
||||
# Copyright (c) 2020 PX4 Development Team. All rights reserved.
|
||||
#
|
||||
# Redistribution and use in source and binary forms, with or without
|
||||
# modification, are permitted provided that the following conditions
|
||||
@@ -32,60 +32,54 @@
|
||||
############################################################################
|
||||
|
||||
px4_add_romfs_files(
|
||||
10016_iris
|
||||
10018_iris_foggy_lidar
|
||||
10019_omnicopter
|
||||
10030_px4vision
|
||||
10040_quadx
|
||||
10041_airplane
|
||||
10042_xvert
|
||||
1010_iris_opt_flow
|
||||
1010_iris_opt_flow.post
|
||||
1011_iris_irlock
|
||||
1012_iris_rplidar
|
||||
1013_iris_vision
|
||||
1013_iris_vision.post
|
||||
1015_iris_obs_avoid
|
||||
1015_iris_obs_avoid.post
|
||||
1017_iris_opt_flow_mockup
|
||||
1018_iris_vision_velocity
|
||||
1019_iris_dual_gps
|
||||
1021_uuv_hippocampus
|
||||
1022_uuv_bluerov2_heavy
|
||||
1030_plane
|
||||
1031_plane_cam
|
||||
1032_plane_catapult
|
||||
1033_rascal
|
||||
1034_rascal-electric
|
||||
1035_techpod
|
||||
1036_malolo
|
||||
1037_believer
|
||||
1038_glider
|
||||
1039_advanced_plane
|
||||
1040_standard_vtol
|
||||
1041_tailsitter
|
||||
1042_tiltrotor
|
||||
1043_standard_vtol_drop
|
||||
1044_plane_lidar
|
||||
1060_rover
|
||||
1061_r1_rover
|
||||
1062_tf-r1
|
||||
1070_boat
|
||||
3010_quadrotor_x
|
||||
3011_hexarotor_x
|
||||
|
||||
1010_gazebo_iris_opt_flow
|
||||
1010_gazebo_iris_opt_flow.post
|
||||
1011_gazebo_iris_irlock
|
||||
1012_gazebo_iris_rplidar
|
||||
1013_gazebo_iris_vision
|
||||
1013_gazebo_iris_vision.post
|
||||
1015_gazebo_iris_obs_avoid
|
||||
1015_gazebo_iris_obs_avoid.post
|
||||
1017_gazebo_iris_opt_flow_mockup
|
||||
1019_gazebo_iris_dual_gps
|
||||
1021_gazebo_uuv_hippocampus
|
||||
1022_gazebo_uuv_bluerov2_heavy
|
||||
1030_gazebo_plane
|
||||
1031_gazebo_plane_cam
|
||||
1032_gazebo_plane_catapult
|
||||
1033_jsbsim_rascal
|
||||
1034_flightgear_rascal-electric
|
||||
1035_gazebo_techpod
|
||||
1036_jsbsim_malolo
|
||||
1037_gazebo_believer
|
||||
1038_gazebo_glider
|
||||
1039_gazebo_advanced_plane
|
||||
1040_gazebo_standard_vtol
|
||||
1041_gazebo_tailsitter
|
||||
1042_gazebo_tiltrotor
|
||||
1043_gazebo_standard_vtol_drop
|
||||
1044_gazebo_plane_lidar
|
||||
1060_gazebo_rover
|
||||
1061_gazebo_r1_rover
|
||||
1062_flightgear_tf-r1
|
||||
1070_gazebo_boat
|
||||
4001_x500
|
||||
|
||||
2507_gazebo_cloudship
|
||||
17001_tf-g1
|
||||
17002_tf-g2
|
||||
2507_cloudship
|
||||
|
||||
3010_jsbsim_quadrotor_x
|
||||
3011_jsbsim_hexarotor_x
|
||||
|
||||
4001_gz_x500
|
||||
4002_gz_x500_depth
|
||||
|
||||
6011_gazebo_typhoon_h480
|
||||
6011_gazebo_typhoon_h480.post
|
||||
|
||||
10016_gazebo_iris
|
||||
10017_jmavsim_iris
|
||||
10018_gazebo_iris_foggy_lidar
|
||||
10019_gazebo_omnicopter
|
||||
10030_gazebo_px4vision
|
||||
|
||||
10040_sihsim_quadx
|
||||
10041_sihsim_airplane
|
||||
10042_sihsim_xvert
|
||||
|
||||
17001_flightgear_tf-g1
|
||||
17002_flightgear_tf-g2
|
||||
6011_typhoon_h480
|
||||
6011_typhoon_h480.post
|
||||
)
|
||||
|
||||
@@ -3,7 +3,7 @@
|
||||
|
||||
udp_offboard_port_local=$((14580+px4_instance))
|
||||
udp_offboard_port_remote=$((14540+px4_instance))
|
||||
[ "$px4_instance" -gt 9 ] && udp_offboard_port_remote=14549 # use the same ports for more than 10 instances to avoid port overlaps
|
||||
[ $px4_instance -gt 9 ] && udp_offboard_port_remote=14549 # use the same ports for more than 10 instances to avoid port overlaps
|
||||
udp_onboard_payload_port_local=$((14280+px4_instance))
|
||||
udp_onboard_payload_port_remote=$((14030+px4_instance))
|
||||
udp_onboard_gimbal_port_local=$((13030+px4_instance))
|
||||
|
||||
@@ -0,0 +1,4 @@
|
||||
#!/bin/sh
|
||||
# shellcheck disable=SC2154
|
||||
|
||||
micrortps_client start -t UDP -r $((2019+2*px4_instance)) -s $((2020+2*px4_instance))
|
||||
@@ -6,8 +6,6 @@ param set-default IMU_INTEG_RATE 250
|
||||
|
||||
if [ "$PX4_SIMULATOR" = "sihsim" ] || [ "$(param show -q SYS_AUTOSTART)" -eq "0" ]; then
|
||||
|
||||
echo "INFO [init] SIH simulator"
|
||||
|
||||
if simulator_sih start; then
|
||||
|
||||
sensor_baro_sim start
|
||||
@@ -15,131 +13,111 @@ if [ "$PX4_SIMULATOR" = "sihsim" ] || [ "$(param show -q SYS_AUTOSTART)" -eq "0"
|
||||
sensor_mag_sim start
|
||||
|
||||
else
|
||||
echo "ERROR [init] simulator_sih failed to start"
|
||||
echo "ERROR [init] simulator_sih failed to start"
|
||||
exit 1
|
||||
fi
|
||||
|
||||
elif [ "$PX4_SIMULATOR" = "gz" ]; then
|
||||
|
||||
# source generated gz_env.sh for IGN_GAZEBO_RESOURCE_PATH
|
||||
if [ -f ./gz_env.sh ]; then
|
||||
. ./gz_env.sh
|
||||
|
||||
elif [ -f ../gz_env.sh ]; then
|
||||
. ../gz_env.sh
|
||||
# source generated gazebo_env.sh for IGN_GAZEBO_RESOURCE_PATH
|
||||
if [ -f gazebo_env.sh ]; then
|
||||
. ./gazebo_env.sh
|
||||
elif [ -f ../gazebo_env.sh ]; then
|
||||
. ../gazebo_env.sh
|
||||
fi
|
||||
|
||||
# "gz sim" only avaiilable in Garden and later
|
||||
GZ_SIM_VERSIONS=$(gz sim --versions 2>&1)
|
||||
if [ $? -eq 0 ] && [ "${GZ_SIM_VERSIONS}" != "" ]
|
||||
then
|
||||
# "gz sim" from Garden on
|
||||
gz_command="gz"
|
||||
gz_sub_command="sim"
|
||||
else
|
||||
IGN_GAZEBO_VERSIONS=$(ign gazebo --versions 2>&1)
|
||||
if [ $? -eq 0 ] && [ "${IGN_GAZEBO_VERSIONS}" != "" ]
|
||||
then
|
||||
# "ign gazebo" for Fortress and earlier
|
||||
gz_command="ign"
|
||||
gz_sub_command="gazebo"
|
||||
# shellcheck disable=SC2236
|
||||
if [ ! -z $PX4_GZ_VERBOSE ]; then
|
||||
if [ "$PX4_GZ_VERBOSE" -le "4" ] && [ "$PX4_GZ_VERBOSE" -ge "1" ]; then
|
||||
gz_verbose=$PX4_GZ_VERBOSE
|
||||
else
|
||||
echo "ERROR [init] Gazebo gz and ign commands unavailable"
|
||||
exit 1
|
||||
gz_verbose=4
|
||||
echo "WARN [init] PX4_GZ_VERBOSE was passed: $PX4_GZ_VERBOSE, not in range [1,4], defaulting to: $gz_verbose."
|
||||
fi
|
||||
fi
|
||||
|
||||
# look for running ${gz_command} gazebo world
|
||||
gz_world=$( ${gz_command} topic -l | grep -m 1 -e "/world/.*/clock" | sed 's/\/world\///g; s/\/clock//g' )
|
||||
|
||||
# shellcheck disable=SC2153
|
||||
if [ -z "${gz_world}" ] && [ -n "${PX4_GZ_WORLDS}" ] && [ -n "${PX4_GZ_WORLD}" ]; then
|
||||
|
||||
echo "INFO [init] starting gazebo with world: ${PX4_GZ_WORLDS}/${PX4_GZ_WORLD}.sdf"
|
||||
|
||||
${gz_command} ${gz_sub_command} --verbose=1 -r -s "${PX4_GZ_WORLDS}/${PX4_GZ_WORLD}.sdf" &
|
||||
|
||||
if [ -z "${HEADLESS}" ]; then
|
||||
# HEADLESS not set, starting gui
|
||||
${gz_command} ${gz_sub_command} -g &
|
||||
fi
|
||||
|
||||
echo "INFO [init] PX4_GZ_VERBOSE set to $gz_verbose."
|
||||
else
|
||||
echo "INFO [init] gazebo already running world: ${gz_world}"
|
||||
PX4_GZ_WORLD=${gz_world}
|
||||
gz_verbose=1
|
||||
echo "INFO [init] PX4_GZ_VERBOSE not explicitly set, defaulting to: $gz_verbose."
|
||||
fi
|
||||
|
||||
# start gz_bridge
|
||||
if [ -n "${PX4_GZ_MODEL}" ] && [ -z "${PX4_GZ_MODEL_NAME}" ]; then
|
||||
# model specified, gz_bridge will spawn model
|
||||
gz_world=$( ign topic -l | grep -m 1 -e "/world/.*/clock" | sed 's/\/world\///g; s/\/clock//g' )
|
||||
|
||||
gz_version_major=$( ign gazebo --versions | sed 's/\..*//g' )
|
||||
gz_version_minor=$( ign gazebo --versions | sed 's/'"${gz_version_major}"\.'//; s/\..*//g' )
|
||||
gz_version_point=$( ign gazebo --versions | sed 's/'"${gz_version_major}"\.'//; s/'"${gz_version_minor}"\.'//')
|
||||
|
||||
if [ -n "${PX4_GZ_MODEL_POSE}" ]; then
|
||||
if [ "$gz_version_major" -gt "6" ] || { [ "$gz_version_major" -eq "6" ] && [ "$gz_version_minor" -gt "12" ]; } || { [ "$gz_version_major" -eq "6" ] && [ "$gz_version_minor" -eq "12" ] && [ "$gz_version_point" -gt "0" ]; }; then
|
||||
echo "INFO [init] using latest version of MultiCopterMotor plugin."
|
||||
else
|
||||
echo "WARN [init] using older version of MultiCopterMotor plugin, please update to latest gazebo > 6.12.0."
|
||||
if [ "$PX4_SIM_MODEL" = "x500" ]; then
|
||||
PX4_SIM_MODEL="x500-Legacy"
|
||||
echo "WARN [init] setting PX4_SIM_MODEL -> $PX4_SIM_MODEL from x500 till gazebo > 6.12.0"
|
||||
fi
|
||||
fi
|
||||
|
||||
if [ -z $gz_world ]; then
|
||||
|
||||
# starting ign gazebo with ${PX4_GZ_WORLD} world
|
||||
echo "INFO [init] starting ign gazebo"
|
||||
# shellcheck disable=SC2153
|
||||
ign gazebo --verbose=$gz_verbose -r -s "${PX4_GZ_WORLDS}/${PX4_GZ_WORLD}.sdf" &
|
||||
|
||||
if [ -z $HEADLESS ]; then
|
||||
# HEADLESS not set, starting ign gazebo gui
|
||||
ign gazebo -g &
|
||||
fi
|
||||
else
|
||||
echo "INFO [init] ign gazebo already running world: $gz_world"
|
||||
PX4_GZ_WORLD=$gz_world
|
||||
fi
|
||||
|
||||
# shellcheck disable=SC2236
|
||||
if [ ! -z $PX4_GZ_MODEL ] && [ -z $PX4_GZ_MODEL_NAME ]; then
|
||||
|
||||
# shellcheck disable=SC2236
|
||||
if [ ! -z $PX4_GZ_MODEL_POSE ]; then
|
||||
# Clean potential input line formatting.
|
||||
model_pose="$( echo "${PX4_GZ_MODEL_POSE}" | sed -e 's/^[ \t]*//; s/[ \t]*$//; s/,/ /g; s/ / /g; s/ /,/g' )"
|
||||
model_pose="$( echo ${PX4_GZ_MODEL_POSE} | sed -e 's/^[ \t]*//; s/[ \t]*$//; s/,/ /g; s/ / /g; s/ /,/g' )"
|
||||
echo "INFO [init] PX4_GZ_MODEL_POSE set, spawning at: ${model_pose}"
|
||||
|
||||
else
|
||||
echo "WARN [init] PX4_GZ_MODEL_POSE not set, spawning at origin."
|
||||
model_pose="0,0,0,0,0,0"
|
||||
fi
|
||||
|
||||
# start gz bridge with pose arg.
|
||||
if gz_bridge start -p "${model_pose}" -m "${PX4_GZ_MODEL}" -w "${PX4_GZ_WORLD}" -i "${px4_instance}"; then
|
||||
if gz_bridge start -p "${model_pose}" -m "${PX4_GZ_MODEL}" -w "${PX4_GZ_WORLD}" -i "${px4_instance}"; then
|
||||
sensor_baro_sim start
|
||||
sensor_gps_sim start
|
||||
sensor_mag_sim start
|
||||
|
||||
else
|
||||
echo "ERROR [init] gz_bridge failed to start"
|
||||
echo "ERROR [init] ign gazebo failed to start"
|
||||
exit 1
|
||||
fi
|
||||
|
||||
elif [ -n "${PX4_GZ_MODEL_NAME}" ] && [ -z "${PX4_GZ_MODEL}" ]; then
|
||||
# model name specificed, gz_bridge will attach to existing model
|
||||
|
||||
elif [ ! -z $PX4_GZ_MODEL_NAME ] && [ -z $PX4_GZ_MODEL ]; then
|
||||
if gz_bridge start -n "${PX4_GZ_MODEL_NAME}" -w "${PX4_GZ_WORLD}"; then
|
||||
sensor_baro_sim start
|
||||
sensor_gps_sim start
|
||||
sensor_mag_sim start
|
||||
|
||||
else
|
||||
echo "ERROR [init] gz_bridge failed to start"
|
||||
echo "ERROR [init] ign gazebo failed to start"
|
||||
exit 1
|
||||
fi
|
||||
|
||||
elif [ -n "${PX4_SIM_MODEL}" ] && [ -z "${PX4_GZ_MODEL_NAME}" ] && [ -z "${PX4_GZ_MODEL}" ]; then
|
||||
|
||||
elif [ ! -z $PX4_SIM_MODEL ] && [ -z $PX4_GZ_MODEL_NAME ] && [ -z $PX4_GZ_MODEL ]; then
|
||||
echo "WARN [init] PX4_GZ_MODEL_NAME or PX4_GZ_MODEL not set using PX4_SIM_MODEL."
|
||||
|
||||
if gz_bridge start -m "${PX4_SIM_MODEL#*gz_}" -w "${PX4_GZ_WORLD}" -i "${px4_instance}"; then
|
||||
if gz_bridge start -m "${PX4_SIM_MODEL}" -w "${PX4_GZ_WORLD}" -i "${px4_instance}"; then
|
||||
sensor_baro_sim start
|
||||
sensor_gps_sim start
|
||||
sensor_mag_sim start
|
||||
|
||||
else
|
||||
echo "ERROR [init] gz_bridge failed to start"
|
||||
echo "ERROR [init] ign gazebo failed to start"
|
||||
exit 1
|
||||
fi
|
||||
|
||||
else
|
||||
echo "ERROR [init] failed to pass only PX4_GZ_MODEL_NAME or PX4_GZ_MODEL"
|
||||
echo "ERROR [init] failed to pass only PX4_GZ_MODEL_NAME or PX4_GZ_MODEL"
|
||||
exit 1
|
||||
fi
|
||||
|
||||
elif [ "$PX4_SIM_MODEL" = "jmavsim_iris" ] || [ "$(param show -q SYS_AUTOSTART)" -eq "10017" ]; then
|
||||
|
||||
echo "INFO [init] jMAVSim simulator"
|
||||
|
||||
if jps | grep -i jmavsim; then
|
||||
kill "$(jps | grep -i jmavsim | awk '{print $1}')" || true
|
||||
sleep 1
|
||||
fi
|
||||
|
||||
param set IMU_INTEG_RATE 250
|
||||
./jmavsim_run.sh -l -r 250 &
|
||||
|
||||
simulator_mavlink start -h localhost $((4560+px4_instance))
|
||||
|
||||
else
|
||||
# otherwise start simulator (mavlink) module
|
||||
simulator_tcp_port=$((4560+px4_instance))
|
||||
@@ -150,16 +128,16 @@ else
|
||||
if [ -z "${PX4_SIM_HOSTNAME}" ]; then
|
||||
|
||||
if [ -z "${PX4_SIM_HOST_ADDR}" ]; then
|
||||
echo "INFO [init] PX4_SIM_HOSTNAME: localhost"
|
||||
echo "PX4 SIM HOST: localhost"
|
||||
simulator_mavlink start -c $simulator_tcp_port
|
||||
else
|
||||
echo "INFO [init] PX4_SIM_HOSTNAME: ${PX4_SIM_HOST_ADDR}"
|
||||
simulator_mavlink start -t "${PX4_SIM_HOST_ADDR}" "${simulator_tcp_port}"
|
||||
echo "PX4 SIM HOST: $PX4_SIM_HOST_ADDR"
|
||||
simulator_mavlink start -t $PX4_SIM_HOST_ADDR $simulator_tcp_port
|
||||
fi
|
||||
|
||||
else
|
||||
echo "INFO [init] PX4_SIM_HOSTNAME: ${PX4_SIM_HOSTNAME}"
|
||||
simulator_mavlink start -h "${PX4_SIM_HOSTNAME}" "${simulator_tcp_port}"
|
||||
echo "PX4 SIM HOST: $PX4_SIM_HOSTNAME"
|
||||
simulator_mavlink start -h $PX4_SIM_HOSTNAME $simulator_tcp_port
|
||||
fi
|
||||
|
||||
fi
|
||||
|
||||
@@ -74,7 +74,7 @@ if [ -f $PARAM_FILE ]; then
|
||||
then
|
||||
echo "ERROR [init] param import failed"
|
||||
|
||||
bsondump $PARAM_FILE
|
||||
param dump $PARAM_FILE
|
||||
|
||||
# try to make a backup copy
|
||||
cp $PARAM_FILE param_import_fail.bson
|
||||
@@ -85,7 +85,7 @@ if [ -f $PARAM_FILE ]; then
|
||||
echo "[init] importing from parameter backup"
|
||||
|
||||
# dump current backup file contents for comparison
|
||||
bsondump $PARAM_BACKUP_FILE
|
||||
param dump $PARAM_BACKUP_FILE
|
||||
|
||||
param import $PARAM_BACKUP_FILE
|
||||
|
||||
@@ -142,9 +142,7 @@ then
|
||||
param set CAL_GYRO2_ID 1311004 # 1311004: DRV_IMU_DEVTYPE_SIM, BUS: 3, ADDR: 1, TYPE: SIMULATION
|
||||
|
||||
param set CAL_MAG0_ID 197388
|
||||
param set CAL_MAG0_PRIO 50
|
||||
param set CAL_MAG1_ID 197644
|
||||
param set CAL_MAG1_PRIO 50
|
||||
|
||||
param set SENS_BOARD_X_OFF 0.000001
|
||||
param set SENS_DPRES_OFF 0.001
|
||||
@@ -261,20 +259,11 @@ fi
|
||||
|
||||
navigator start
|
||||
|
||||
# Try to start the microdds_client with UDP transport if module exists
|
||||
microdds_ns=""
|
||||
if [ "$px4_instance" -ne "0" ]
|
||||
# Try to start the micrortps_client with UDP transport if module exists
|
||||
if px4-micrortps_client status > /dev/null 2>&1
|
||||
then
|
||||
# Assign new xrce dds key based on instance number and set default namespace
|
||||
param set XRCE_DDS_KEY ${px4_instance}
|
||||
microdds_ns="-n px4_$px4_instance"
|
||||
. px4-rc.rtps
|
||||
fi
|
||||
if [ -n "$PX4_MICRODDS_NS" ]
|
||||
then
|
||||
# Override namespace if environment variable is defined
|
||||
microdds_ns="-n $PX4_MICRODDS_NS"
|
||||
fi
|
||||
microdds_client start -t udp -p 8888 $microdds_ns
|
||||
|
||||
if param greater -s MNT_MODE_IN -1
|
||||
then
|
||||
|
||||
@@ -31,6 +31,7 @@ param set-default MC_PITCH_P 6
|
||||
param set-default MC_PITCHRATE_P 0.2
|
||||
param set-default MC_ROLL_P 6
|
||||
param set-default MC_ROLLRATE_P 0.3
|
||||
param set-default MIS_LTRMIN_ALT 10
|
||||
param set-default MIS_TAKEOFF_ALT 10
|
||||
param set-default MIS_YAW_TMT 10
|
||||
|
||||
|
||||
@@ -22,7 +22,7 @@ param set-default VT_ELEV_MC_LOCK 0
|
||||
param set-default VT_MOT_COUNT 2
|
||||
param set-default VT_TYPE 0
|
||||
param set-default VT_FW_DIFTHR_EN 1
|
||||
param set-default VT_FW_DIFTHR_S_Y 0.3
|
||||
param set-default VT_FW_DIFTHR_SC 0.3
|
||||
param set-default MPC_MAN_Y_MAX 60
|
||||
param set-default MC_PITCH_P 5
|
||||
|
||||
|
||||
@@ -39,6 +39,7 @@ param set-default GND_THR_CRUISE 0.3
|
||||
param set-default GND_THR_MAX 0.5
|
||||
param set-default GND_THR_MIN 0
|
||||
|
||||
param set-default MIS_LTRMIN_ALT 0.01
|
||||
param set-default MIS_TAKEOFF_ALT 0.01
|
||||
|
||||
param set-default NAV_ACC_RAD 0.5
|
||||
|
||||
@@ -1,74 +0,0 @@
|
||||
#!/bin/sh
|
||||
#
|
||||
# @name Aion Robotics R1 UGV
|
||||
#
|
||||
# @url https://www.aionrobotics.com/r1
|
||||
#
|
||||
# @type Rover
|
||||
# @class Rover
|
||||
#
|
||||
# @board px4_fmu-v2 exclude
|
||||
# @board bitcraze_crazyflie exclude
|
||||
#
|
||||
|
||||
. ${R}etc/init.d/rc.rover_defaults
|
||||
|
||||
param set-default BAT1_N_CELLS 4
|
||||
|
||||
param set-default EKF2_GBIAS_INIT 0.01
|
||||
param set-default EKF2_ANGERR_INIT 0.01
|
||||
param set-default EKF2_MAG_TYPE 1
|
||||
|
||||
param set-default FW_AIRSPD_MIN 0
|
||||
param set-default FW_AIRSPD_TRIM 1
|
||||
param set-default FW_AIRSPD_MAX 3
|
||||
|
||||
param set-default GND_SP_CTRL_MODE 1
|
||||
param set-default GND_L1_DIST 5
|
||||
param set-default GND_L1_PERIOD 3
|
||||
param set-default GND_THR_CRUISE 0.7
|
||||
param set-default GND_THR_MAX 0.5
|
||||
|
||||
# Because this is differential drive, it can make a turn with radius 0.
|
||||
# This corresponds to a turn angle of pi radians.
|
||||
# If a special case is made for differential-drive, this will need to change.
|
||||
param set-default GND_MAX_ANG 3.142
|
||||
param set-default GND_WHEEL_BASE 0.3
|
||||
|
||||
# TODO: Set to -1.0, to allow reversing. This will require many changes in the codebase
|
||||
# to support negative throttle.
|
||||
param set-default GND_THR_MIN 0
|
||||
param set-default GND_SPEED_P 0.25
|
||||
param set-default GND_SPEED_I 3
|
||||
param set-default GND_SPEED_D 0.001
|
||||
param set-default GND_SPEED_IMAX 0.125
|
||||
param set-default GND_SPEED_THR_SC 1
|
||||
|
||||
param set-default MIS_TAKEOFF_ALT 0.01
|
||||
|
||||
param set-default NAV_ACC_RAD 0.5
|
||||
|
||||
# Enable Airspeed check circuit breaker because Rovers will have no airspeed sensor
|
||||
param set-default CBRK_AIRSPD_CHK 162128
|
||||
|
||||
# Differential drive acts like ackermann steering with a maximum turn angle of 180 degrees, or pi radians
|
||||
param set-default GND_MAX_ANG 3.1415
|
||||
|
||||
param set-default RBCLW_BAUD 8
|
||||
param set-default RBCLW_COUNTS_REV 1200
|
||||
param set-default RBCLW_ADDRESS 128
|
||||
# 104 corresponds to Telem 4
|
||||
param set-default RBCLW_SER_CFG 104
|
||||
# Start this driver after setting parameters, because the driver uses some of those parameters.
|
||||
# roboclaw start /dev/ttyS3
|
||||
|
||||
# Set geometry & output configration
|
||||
param set-default CA_AIRFRAME 6
|
||||
param set-default CA_R_REV 3
|
||||
param set-default PWM_MAIN_FUNC1 101
|
||||
param set-default PWM_MAIN_FUNC2 102
|
||||
param set-default PWM_MAIN_DIS1 1500
|
||||
param set-default PWM_MAIN_DIS2 1500
|
||||
param set-default PWM_MAIN_TIM0 50
|
||||
param set-default PWM_MAIN_TIM1 50
|
||||
|
||||
@@ -45,6 +45,7 @@ param set-default GND_SPEED_D 0.001
|
||||
param set-default GND_SPEED_IMAX 0.125
|
||||
param set-default GND_SPEED_THR_SC 1
|
||||
|
||||
param set-default MIS_LTRMIN_ALT 0.01
|
||||
param set-default MIS_TAKEOFF_ALT 0.01
|
||||
|
||||
param set-default NAV_ACC_RAD 0.5
|
||||
|
||||
@@ -118,7 +118,6 @@ px4_add_romfs_files(
|
||||
|
||||
50000_generic_ground_vehicle
|
||||
50004_nxpcup_car_dfrobot_gpx
|
||||
50003_aion_robotics_r1_rover
|
||||
|
||||
# [60000, 61000] (Unmanned) Underwater Robots
|
||||
60000_uuv_generic
|
||||
|
||||
@@ -13,6 +13,7 @@ param set-default MAV_TYPE 11
|
||||
#
|
||||
# Default parameters for UGVs.
|
||||
#
|
||||
param set-default MIS_LTRMIN_ALT 0.01
|
||||
param set-default MIS_TAKEOFF_ALT 0.01
|
||||
|
||||
param set-default NAV_ACC_RAD 2
|
||||
|
||||
@@ -18,7 +18,6 @@ control_allocator start
|
||||
#
|
||||
# Start attitude controller.
|
||||
#
|
||||
fw_rate_control start
|
||||
fw_att_control start
|
||||
fw_pos_control_l1 start
|
||||
airspeed_selector start
|
||||
|
||||
@@ -43,8 +43,8 @@ param set-default RTL_LAND_DELAY -1
|
||||
param set-default NAV_ACC_RAD 10
|
||||
|
||||
param set-default MIS_DIST_WPS 5000
|
||||
param set-default MIS_LTRMIN_ALT 25
|
||||
param set-default MIS_TAKEOFF_ALT 25
|
||||
param set-default MIS_TKO_LAND_REQ 2
|
||||
|
||||
#
|
||||
# FW takeoff acceleration can easily exceed ublox GPS 2G default.
|
||||
|
||||
@@ -13,6 +13,7 @@ param set-default MAV_TYPE 10
|
||||
#
|
||||
# Default parameters for UGVs.
|
||||
#
|
||||
param set-default MIS_LTRMIN_ALT 0.01
|
||||
param set-default MIS_TAKEOFF_ALT 0.01
|
||||
|
||||
param set-default NAV_ACC_RAD 2
|
||||
|
||||
@@ -191,10 +191,7 @@ then
|
||||
ist8308 -X -q start
|
||||
ist8310 -X -q start
|
||||
lis2mdl -X -q start
|
||||
if ! lis3mdl -X -q start
|
||||
then
|
||||
lis3mdl -X -q -a 0x1c start
|
||||
fi
|
||||
lis3mdl -X -q start
|
||||
qmc5883l -X -q start
|
||||
rm3100 -X -q start
|
||||
|
||||
|
||||
Some files were not shown because too many files have changed in this diff Show More
Reference in New Issue
Block a user