Daniel Agar
713350930d
boards: px4_fmu-v5 add test variant
2021-12-05 18:08:54 -05:00
Daniel Agar
a2064cceff
boards: enable early MPU reset on any board potentially not using the PX4 bootloader
2021-12-01 20:13:41 -05:00
Daniel Agar
b9152dc4d0
boards: px4_fmu-v5x_default increase ETH pktsize to max and enable tcp delayed ack
2021-11-29 09:08:42 -05:00
Daniel Agar
0459b73520
boards: px4_fmu-v5x enable mavlink ethernet by default
2021-11-29 09:08:42 -05:00
David Sidrane
b8bdf7e1c4
px4_fmu-v5x nsh:Remove CONFIG_RAMTRON_WRITEWAIT
2021-11-26 19:27:29 -05:00
David Sidrane
3504541ebd
px4_fmu-v5x base_phy_DP83848C:Remove CONFIG_RAMTRON_WRITEWAIT
2021-11-26 19:27:29 -05:00
David Sidrane
53b579a79d
px4_fmu-v5x:Set CONFIG_MKFATFS_BUFFER_ALIGMENT=32
2021-11-24 09:46:23 -05:00
Beat Küng
4c03def6e9
boards: add CONTROL_ALLOCATOR + ACTUATOR_TEST
2021-11-23 12:40:22 -05:00
Daniel Agar
f5d9b01f5c
NuttX build in place
...
- cmake NuttX build wrapper compile in place instead of copying source tree to build directory
- slightly faster skipping necessary copying (depending on system)
- allows debugging in place
- easier to work directly in NuttX following official documentation
- simplifies overall build which should make it easier to resolve any remaining NuttX dependency issues in the build system
- the downside is switching back and forth between different builds always require rebuilding NuttX, but I think this is worth the improved developer experience
- also no longer builds px4io and bootloader in every single build, for most users these rarely change and we're wasting a lot of build time
2021-11-15 18:47:38 -05:00
Daniel Agar
2d816e0b3e
[WIP] manual_control selector hacks
2021-11-09 16:05:25 +01:00
Beat Küng
8476875b4d
Kconfig: add missing serial ports
2021-10-27 08:03:55 +02:00
bresch
6ec9ab11f2
add fw auto-tune module to board configs
2021-10-25 13:41:31 +02:00
Beat Küng
4a4acf7ead
px4/fmu-v5x: add capture pins to list of pwm pins
2021-10-18 18:45:19 -04:00
Julian Oes
f91aa76645
boards: add v5x RTPS version again
...
I just copied this from v5 and removed the heater.
2021-10-13 16:20:43 -04:00
Daniel Agar
49a4283d0d
boards: px4_fmu-v5x restore rc.board_mavlink
...
- this was unintentionally removed in https://github.com/PX4/PX4-Autopilot/pull/16180
2021-10-13 17:34:20 +02:00
Daniel Agar
cb6b1bd427
boards: delete unused test and debug variants
2021-10-07 10:09:01 -04:00
Peter van der Perk
ed5fee1a72
Backport #18311 mc atune
2021-10-07 10:09:01 -04:00
Peter van der Perk
454c907b7d
Kconfig backport #18327 mag_bias
2021-10-07 10:09:01 -04:00
Peter van der Perk
36191e649a
Kconfig backport #18289 and other flash size fixes
2021-10-07 10:09:01 -04:00
Peter van der Perk
5e98f38f78
Kconfig rebase backports 26-09-21
2021-10-07 10:09:01 -04:00
Peter van der Perk
12898ea560
[Kconfig] Update configs 06-09-21
2021-10-07 10:09:01 -04:00
Peter van der Perk
0571932e7c
[Kconfig] Backport rebase config changes
2021-10-07 10:09:01 -04:00
Peter van der Perk
33fd65e5fe
[Kconfig] Fix regressions found by bloaty and cleanup unused cmake
2021-10-07 10:09:01 -04:00
Peter van der Perk
43a3de8c18
[Kconfig] Fix px4 fmu configs
2021-10-07 10:09:01 -04:00
Peter van der Perk
efc91d2b69
[Kconfig] Fixed inclusion of microbench bydefault when TESTING was enabled
...
Added full optimization option
2021-10-07 10:09:01 -04:00
Peter van der Perk
b3e799e277
[Kconfig] Add all distance sensors
2021-10-07 10:09:01 -04:00
Peter van der Perk
21e6547ac7
[Kconfig] Toolchain & platform fixes, SITL still broken
2021-10-07 10:09:01 -04:00
Peter van der Perk
6af0477733
[Kconfig] Gnerate px4board from old cmake
...
Added make updateconfig to update all config when default's have changed
Added cmake to px4board conversion script
2021-10-07 10:09:01 -04:00
Daniel Agar
bbfaa4694c
boards: cleanup serial RX DMA hrt_call_every
...
- remove ts_to_abstime dependency
2021-10-06 14:39:59 -04:00
Daniel Agar
51758bd7e6
boards: delete unused variants
2021-10-05 23:14:04 -04:00
Daniel Agar
c271a9e3e6
add sd_stress to all boards and run on test rack
2021-10-04 17:38:31 -04:00
Julian Oes
397b1ed8d6
Add sd_stress command
2021-10-04 17:38:31 -04:00
Daniel Agar
6d78054f50
mavlink USB auto start/stop on boards with VBUS
...
- no longer start sercon or mavlink usb by default
- on USB connection (VBUS) monitor serial USB at low rate and start Mavlink if there's a HEARTBEAT or nshterm on 3 consecutive carriage returns
- the mavlink USB instance is automatically stopped and serdis executed if USB is disconnected
- skipping Mavlink USB (and sercon) saves a considerable amount of memory on older boards
2021-10-03 15:32:54 -04:00
bresch
1443f773da
mbe: add module to targets
2021-10-02 21:25:21 -04:00
bresch
5874b1f87c
mc atune: add module to all targets
...
- adjust flash constrianed targets to fit
2021-10-02 18:12:05 -04:00
Thomas Debrunner
43ece74fa0
ina238: Do not expose raw adc config to user, make specific to ina238
2021-09-22 10:02:17 +02:00
Thomas Debrunner
b8d0bb44c4
ina23X: Support for ina23X power monitors
2021-09-22 10:02:17 +02:00
Beat Küng
c5c80e31b6
boards: remove DIRECT_INPUT_TIMER_CHANNELS from board_config.h
2021-09-08 16:10:24 -04:00
Beat Küng
a8e75d174c
boards: remove BOARD_HAS_PWM and use DIRECT_PWM_OUTPUT_CHANNELS
2021-09-08 16:10:24 -04:00
Daniel Agar
cf0a4e06db
boards: px4_fmu-v5x_test disable unused drivers to save flash
2021-09-05 23:18:28 -04:00
Daniel Agar
45001d1ba4
boards: px4_fmu-v5x_test disable modules to save flash
2021-09-01 15:16:00 -04:00
Daniel Agar
40e5477edb
NuttX boards fix mkfatfs and rcS logic
2021-09-01 15:16:00 -04:00
David Sidrane
f2925d234e
px4_fmuv5x:Use parameter setting for ina22x
2021-08-22 14:48:01 -04:00
David Sidrane
7e7cbceaea
px4_fmuv5x:Add INA228
2021-08-22 14:48:01 -04:00
David Sidrane
8f4811daa8
px4_fmu-v5x:Newer HW Start BARRO on bus 2
2021-08-20 10:15:57 -04:00
David Sidrane
dc5fd25e8c
px4_fmu-v5x:Use HB 10pin GPS rotation
2021-08-20 10:15:57 -04:00
David Sidrane
bb913ae11a
system_load:Track Dynamic PID hash
2021-08-13 14:22:00 -04:00
David Sidrane
f5d679fae4
px4_fmu-v5x: Update nsh defconfig NuttX 10.1.0+ CONFIG_NET_SOCKOPTS Automatic
2021-08-13 14:22:00 -04:00
David Sidrane
cab2ba209e
px4_fmu-v5x: Update base_phy_DP83848C defconfig NuttX 10.1.0+ CONFIG_NET_SOCKOPTS Automatic
2021-08-13 14:22:00 -04:00
David Sidrane
6e93251169
px4_fmu-v5x: Update nsh defconfig NuttX 10.1.0+
2021-08-13 14:22:00 -04:00