1164 Commits

Author SHA1 Message Date
David Sidrane
f460611098 Fix serial_test stack warning 2022-02-02 11:12:53 -05:00
Peter van der Perk
efd3bc1794 Serial_test move g_cl and g_mod from heap to stack to save memory by not preallocating them 2022-02-02 07:21:43 -08:00
David Sidrane
48c32f7795 Added serial passthru
This addes the command serial_passthru which will pass data from one
   device to another. This can be used to use u-center connected to USB
   with a GPS on a serial port.

   Usage: serial_passthru [arguments...]
      -e <val>    External device path
                  values: <file:dev>
      -d <val>    Internal device path
                  values: <file:dev>
      [-b <val>]  Baudrate
                  default: 115200
      [-t]        Track the External devices baudrate on internal device

    With the -t option baudrate changes made on the PC connected to the USB
    will be set to the intrenal device.
2022-02-01 21:49:29 -05:00
Julian Oes
1754e25920 vmount: add param to use RC input for angular rate
Until now RC input was translated to angles only. I added the param
MNT_RC_IN_MODE which allows the RC input to be used for angular rate.
2022-01-10 23:04:10 -05:00
Julian Oes
a21fefda48 tune_control: prevent segfault 2022-01-10 23:04:10 -05:00
Daniel Agar
d077ca15fb delete PWM_SERVO_SET, PWM_SERVO_SET_MODE, systemcmds/motor_ramp, and pwm_out test 2022-01-10 09:51:11 -05:00
Daniel Agar
df44df2df6 delete systemcmds/esc_calib
- this is redundant with commander esc_calibration
2022-01-10 09:51:11 -05:00
Daniel Agar
d3301ba826 delete PWM_SERVO_GET_TRIM_PWM 2022-01-10 09:51:11 -05:00
Daniel Agar
8de59dad32 delete PWM_SERVO_SET_TERMINATION_FAILSAFE 2022-01-10 09:51:11 -05:00
Daniel Agar
1739ecc981 delete PWM_SERVO_SET_FORCE_FAILSAFE 2022-01-10 09:51:11 -05:00
Daniel Agar
b7ed4fd3e0 delete PWM_SERVO_SET_DISARMED_PWM 2022-01-10 09:51:11 -05:00
Daniel Agar
551a31ce2f delete PWM_SERVO_SET_FAILSAFE_PWM 2022-01-10 09:51:11 -05:00
Daniel Agar
78b3d22471 lib/mixer_module: consume output_limit library 2022-01-10 11:59:55 +01:00
Daniel Agar
80ef6e19df tinybson: explicitly append int32 or int64 2022-01-02 10:46:34 -05:00
Daniel Agar
9cbb5c9920 parameters: fix export shutdown locking
- in NuttX bchlib keeps a sector sized buffer that might not be written
out to RAMTRON until the file is closed
2022-01-02 10:46:34 -05:00
Daniel Agar
e9283d90cc systemcmds/netman: fix code style 2022-01-01 18:40:47 -05:00
David Sidrane
db159a43cc test_dataman:Set SEM_PRIO_NONE on all semaphores 2021-12-31 10:27:24 -05:00
Daniel Agar
20d3e6f4e1 parameters: add simple BSON verification pass after export 2021-12-27 09:17:00 -05:00
Daniel Agar
3f3836afa8 parameters: simplify import mark_unsaved and don't fail bson decode unnecessarily 2021-12-24 14:32:40 -05:00
Daniel Agar
38731662c6 parameters use bitset for mark_unsaved 2021-12-24 14:32:40 -05:00
Daniel Agar
0029a75ab0 systemcmds: convert c -> c++ 2021-12-21 09:22:49 -05:00
Julian Oes
3c5bf497a3 esc_calib: remove unused variable 2021-12-20 10:56:24 -05:00
Daniel Agar
acdcc35392 tests: dataman fix ssize_t printf 2021-12-13 22:51:23 -05:00
Daniel Agar
986cf288da
dataman: remove obsolete persistence and reset reason 2021-12-12 12:06:35 -05:00
Beat Küng
7aed8c4f47 sd_bench: print errno on write failure 2021-12-10 09:03:08 -05:00
Daniel Agar
1f6acd0171 parameters: add simple backup and restore mechanism 2021-12-06 09:37:08 -05:00
Daniel Agar
7bfebf5289 parameters: add param dump to read and decode bson to console 2021-12-06 09:37:08 -05:00
Daniel Agar
1af068179e parameters: tinybson print errors and count imported types 2021-12-06 09:37:08 -05:00
Daniel Agar
10f2564ae8 systemcmds/tests: dataman test use proper signed type for dm_read() return 2021-12-05 18:08:54 -05:00
David Sidrane
ade7315e9b sd_bench:Missing free 2021-11-29 16:01:08 -05:00
David Sidrane
58a9bf0b2e sd_bench:Add verify and keep options 2021-11-25 13:11:45 -05:00
David Sidrane
e76dda545c hardfault_log:Fix formatting 2021-11-24 15:00:38 -05:00
Beat Küng
6fdcc43ea8 mixer_module: add testing for SYS_CTRL_ALLOC=1 with actuator_test cmd+uorb msg 2021-11-23 12:40:22 -05:00
Daniel Agar
f5d9b01f5c
NuttX build in place
- cmake NuttX build wrapper compile in place instead of copying source tree to build directory
    - slightly faster skipping necessary copying (depending on system)
    - allows debugging in place
    - easier to work directly in NuttX following official documentation
    - simplifies overall build which should make it easier to resolve any remaining NuttX dependency issues in the build system
 - the downside is switching back and forth between different builds always require rebuilding NuttX, but I think this is worth the improved developer experience
 - also no longer builds px4io and bootloader in every single build, for most users these rarely change and we're wasting a lot of build time
2021-11-15 18:47:38 -05:00
Daniel Agar
7b7b7acd36 i2c_spi_buses: respect CONFIG_I2C and CONFIG_SPI
- bmp280, dps310, and ms5611 barometers support boards without I2C
2021-11-15 15:57:33 -05:00
Beat Küng
fdf8461452 ver: print PX4_BOARD_LABEL for 'ver all' 2021-11-11 08:38:42 -05:00
Vatsal Asitkumar Joshi
ea1ae73526
Support for Raspberry PI RP2040 MCU (#18083) 2021-11-03 12:14:30 -04:00
Beat Küng
8a2b310b83 topic_listener: avoid code generation, use existing metadata at runtime
This reduces flash size for v5 by ~110KB, the topic listener now only adds
about 1.2KB.
2021-10-20 08:10:05 +02:00
mcsauder
21163d859e Whitespace cleanup. 2021-10-19 13:29:26 -04:00
Beat Küng
da1df5352c fix pwm: only update oneshot timers owned by the current pwm_out instance
This fixes the case where oneshot was enabled with multi-instance pwm_out,
triggering oneshot updates too close to each other and as a result could
lead to spinning motors while disarmed.
2021-10-18 18:45:19 -04:00
Peter van der Perk
d8e88aedc6 motor_ramp ram cleanup 2021-10-08 10:51:06 -04:00
Peter van der Perk
36191e649a Kconfig backport #18289 and other flash size fixes 2021-10-07 10:09:01 -04:00
Peter van der Perk
b7f03cec5e [Kconfig] Add FMU-V5 and PX4-IOv2 px4board config 2021-10-07 10:09:01 -04:00
Peter van der Perk
d5e3e9a7bc [Kconfig] Decompose Kconfig, now each module has its own Kconfig
Which is better for versioning and decomposability
2021-10-07 10:09:01 -04:00
Peter van der Perk
7a747b43f6 Initial boardconfig working with FMUK66 2021-10-07 10:09:01 -04:00
Peter van der Perk
4b89ff29ce PX4 full firmware Kconfig PoC 2021-10-07 10:09:01 -04:00
Daniel Agar
a519916d79 systemcmds/sd_stress: return -1 on FAIL 2021-10-04 17:38:31 -04:00
Julian Oes
397b1ed8d6 Add sd_stress command 2021-10-04 17:38:31 -04:00
Daniel Agar
6d78054f50
mavlink USB auto start/stop on boards with VBUS
- no longer start sercon or mavlink usb by default
 - on USB connection (VBUS) monitor serial USB at low rate and start Mavlink if there's a HEARTBEAT or nshterm on 3 consecutive carriage returns
 - the mavlink USB instance is automatically stopped and serdis executed if USB is disconnected
 - skipping Mavlink USB (and sercon) saves a considerable amount of memory on older boards
2021-10-03 15:32:54 -04:00
Daniel Agar
089c962d92 px4io: moving mixing to FMU side
Using mixers on the IO side had a remote benefit of being able to
override all control surfaces with a radio remote on a fixed wing.
This ended up not being used that much and since the original design
10 years ago (2011) we have been able to convince ourselves that the
overall system stability is at a level where this marginal benefit,
which is not present on multicopters, is not worth the hazzle.

Co-authored-by: Beat Küng <beat-kueng@gmx.net>
Co-authored-by: Daniel Agar <daniel@agar.ca>
2021-09-25 19:15:05 -04:00