Daniel Agar
f5d9b01f5c
NuttX build in place
...
- cmake NuttX build wrapper compile in place instead of copying source tree to build directory
- slightly faster skipping necessary copying (depending on system)
- allows debugging in place
- easier to work directly in NuttX following official documentation
- simplifies overall build which should make it easier to resolve any remaining NuttX dependency issues in the build system
- the downside is switching back and forth between different builds always require rebuilding NuttX, but I think this is worth the improved developer experience
- also no longer builds px4io and bootloader in every single build, for most users these rarely change and we're wasting a lot of build time
2021-11-15 18:47:38 -05:00
Daniel Agar
a8c3bcca32
boards: disable CONFIG_STM32H7_SPI_DMATHRESHOLD
2021-11-08 19:20:47 -05:00
David Sidrane
38e2e6a01f
Use NuttX MPU Reset ( #18283 )
...
* NuttX with MPU reset backports
* Use NuttX MPU reset
2021-10-25 18:05:31 -04:00
Daniel Agar
40e5477edb
NuttX boards fix mkfatfs and rcS logic
2021-09-01 15:16:00 -04:00
David Sidrane
bb913ae11a
system_load:Track Dynamic PID hash
2021-08-13 14:22:00 -04:00
David Sidrane
51b1cf774c
cuav_nora: Update bootloader defconfig NuttX 10.1.0+
2021-08-13 14:22:00 -04:00
David Sidrane
b8aa6ccaa1
cuav_nora: Update nsh defconfig NuttX 10.1.0+
2021-08-13 14:22:00 -04:00
David Sidrane
07e38563ba
cuav_nora: Disable OTG_ID_GPIO
2021-05-05 20:48:06 +02:00
Daniel Agar
565c644b2e
boards: CUAV keep Nora and X7pro in sync
2021-04-05 12:54:41 -04:00
David Sidrane
df201342bb
cuav nora:Add remaining SRAM4 & DTCM to heap
2021-04-03 14:13:23 -04:00
Daniel Agar
6874e9fba0
boards: NuttX disable all NSH memory debug commands (mb, mh, mw) by default
...
- closes https://github.com/PX4/PX4-Autopilot/issues/17062
2021-03-30 09:23:43 -04:00
Daniel Agar
e77bffe582
boards: STM32H7 remove CONFIG_MM_REGIONS=3
2021-03-26 17:40:44 -04:00
David Sidrane
ba3a099775
cuav nora:Properly configure BDMA
2021-03-23 05:52:27 -07:00
David Sidrane
3581099c09
Revert "boards: disable BDMA on STM32H7 for now"
...
This reverts commit f0d1f1d679
2021-03-23 05:52:27 -07:00
David Sidrane
4f3d74b9d3
cuav nora:Enable ADC3 in support of temperature sensing
2021-03-19 15:48:47 +01:00
Daniel Agar
440e72e697
boards: cuav nora/x7pro don't have low speed external (LSE) oscillator
2021-03-09 10:49:57 -05:00
Daniel Agar
a0b9b44ff6
boards: stm32h7 set CONFIG_SDMMC1 consistently
2021-03-09 09:37:05 -05:00
Daniel Agar
8f0918a16b
boards: remove unused linker __param section
2021-02-08 23:22:48 -05:00
CUAVcaijie
e30b8495b8
Enable x7pro and nora spi4 DMA
2021-01-29 21:30:12 -05:00
Daniel Agar
f0d1f1d679
boards: disable BDMA on STM32H7 for now
2021-01-28 21:16:23 +01:00
Daniel Agar
1ec10bfcc6
boards: disable CONFIG_ARMV7M_LAZYFPU again ( #16573 )
...
- this was causing hard faults on the CUAV Nora and possibly other boards, disabling everywhere until we fully understand the root cause
2021-01-17 22:40:21 -05:00
Daniel Agar
cb74cb8692
boards: enable CONFIG_ARMV7M_LAZYFPU everywhere
2021-01-12 09:04:38 +01:00
CUAV_gitfishup
e399dbc440
boards: CUAV Nora support cuav_neo_v2_pro and disable CONFIG_STM32H7_BDMA
2020-11-13 09:45:57 -05:00
Daniel Agar
c60743b306
boards: NuttX increase file name max 32 -> 40
2020-11-08 12:51:59 -05:00
Daniel Agar
233949a377
NuttX upgrade to 10.0.0+ defconfig changes
2020-10-28 14:25:25 -04:00
David Sidrane
9bd88c34a9
cuav_nora: Updates for NuttX 9.1.0+ External schedule_note
2020-09-16 21:32:04 -04:00
David Sidrane
2745ffe946
cuav_nora:Add support for DMA on SPI6
2020-09-16 21:32:04 -04:00
David Sidrane
93e3b52515
cuav_nora Updates for NuttX 9.1.0-
2020-09-16 21:32:04 -04:00
gitfishup
f3579e473b
boards: CUAV Nora enable UAVCAN
2020-09-01 21:16:17 -04:00
Daniel Agar
2c3441aa90
boards: reduce CONFIG_NFILE_DESCRIPTORS 15 -> 12
...
- reduced now that calibration uses uORB::Subscription
- can likely be reduced further (perhaps < 8) with additional testing
2020-08-21 10:12:13 -04:00
Daniel Agar
6937dbc5fd
boards: add CUAV Nora support
2020-08-12 13:02:16 -04:00
Daniel Agar