fly316/PX4-Autopilot
7
0
Fork 0
mirror of https://gitee.com/mirrors_PX4/PX4-Autopilot.git synced 2026-10-18 07:13:33 +08:00
Code Issues Packages Projects Releases Wiki Activity
8,388 Commits 852 Branches 161 Tags
afc8908d38ff2eaabc2ca35363ac04697152cb6b
Commit Graph
1031 Commits
Author SHA1 Message Date
Andrew Tridgell 3f0f34a4c7 ms5611: give cleaner SPI traces 
this makes logic traces cleaner by zeroing extra bytes written
 2013-12-10 11:01:20 +01:00
Thomas Gubler cbde8d27f8 fix small copy paste error in px4io driver 2013-12-08 20:15:47 +01:00
Lorenz Meier 0ba507b640 Added support for a total of four control groups to the IO driver and IO firmware. This allows to run auxiliary payload. Cleaned up defines for RC input channel counts, this needs another sweep to then finally allow up to 16 mapped channels and up to 20-24 RAW RC channels 2013-12-08 11:25:45 +01:00
Lorenz Meier c72162cc5a Add also default descriptor for alternate sensors 2013-12-07 10:44:29 +01:00
Lorenz Meier 7becbcdbd5 Made all usual suspects default to their custom names and only register the default name if its not already taken by someone else 2013-12-07 10:34:32 +01:00
Lorenz Meier 012adc9e33 Minor fixes to bus reset 2013-12-04 09:25:07 +01:00
Lorenz Meier acc3cc087f Added sensor rail reset IOCTL and command (fmu sensor_reset 10 resets for 10 ms) 2013-12-04 08:17:35 +01:00
Lorenz Meier 881cf61553 Added IOCTL and command for sensor rail reset (does not yet re-initialize sensor drivers) 2013-12-04 07:57:23 +01:00
Andrew Tridgell edc5b68499 l3gd20: use highest possible on-chip filter bandwidth 
this allows the software filter to do its job properly
 2013-12-04 07:08:23 +01:00
Andrew Tridgell b2119839bd lsm303d: init filter to 773 Hz 2013-12-04 07:08:05 +01:00
Andrew Tridgell bdb462379a FMUv2: don't config ADC pins that are now used for MPU6k CS and other uses 2013-11-30 20:21:51 +11:00
Andrew Tridgell 19853f87a2 FMUv2: change CS pins to 2MHz 
this gives cleaner traces
 2013-11-30 20:21:44 +11:00
Andrew Tridgell 6ba54e7035 lsm303d: cleanup logic traces by pre-zeroing all transfers 2013-11-30 20:21:28 +11:00
Andrew Tridgell 9214154831 lsm303d: added I2C disable based on method from ST engineering support 2013-11-30 20:21:08 +11:00
Andrew Tridgell cb76f07d31 l3gd20: added I2C disable based on method from ST engineering support 2013-11-30 20:20:23 +11:00
Andrew Tridgell 720f6ab313 FMUv2: set MPU6000 CS as initially de-selected 2013-11-30 20:20:03 +11:00
Andrew Tridgell 3a597d1a1f FMUv2: added define for MPU DRDY pin 2013-11-30 20:19:58 +11:00
Andrew Tridgell 3decf408c2 FMUv2: added support for MPU6000 on v2.4 board 2013-11-30 20:19:52 +11:00
Andrew Tridgell b666581983 lsm303d: fixed TEMP_H register define 2013-11-30 20:19:26 +11:00
Andrew Tridgell af47a3d795 mpu6000: change bus speed based on registers being accessed 
this ensures we follow the datasheet requirement of 1MHz for general
registers and up to 20MHz for sensor and int status registers
 2013-11-30 20:17:55 +11:00
Andrew Tridgell 244c3602f2 SPI: added set_frequency() API 
this allows the bus speed to be changed on the fly by device
drivers. This is needed for the MPU6000
 2013-11-30 20:17:09 +11:00
Andrew Tridgell 7d415b0c42 lsm303d: print more registers in "lsm303d regdump" 2013-11-30 20:16:51 +11:00
Andrew Tridgell 72c53b6537 lsm303d: define some more register addresses 2013-11-30 20:16:45 +11:00
Andrew Tridgell a46042754f lsm303d: added 'lsm303d regdump' command 
useful for diagnosing issues
 2013-11-30 20:16:32 +11:00
marco 4e713a7083 motortest mode enhanced 2013-11-26 19:01:43 +01:00
Stefan Rado 5f18ce506d Add FrSky telemetry application. 
This daemon emulates an FrSky sensor hub by periodically sending data packets to an attached FrSky receiver.
 2013-11-24 13:39:02 +01:00
marco d2e32f2fc5 mkblctrl - hotfix for i2c scan 2013-11-22 21:05:40 +01:00
marco cc8e85ce7e mkblctrl scans now i2c3 and i2c1 bir connected esc's 2013-11-21 22:24:16 +01:00
marco f82a202667 actuator effective removed - unused 2013-11-19 17:35:04 +01:00
marco 21cc19cef6 mkblctrl set a default device / -d (device) parameter for alternate device added / -t testmode enhanced 2013-11-18 21:32:41 +01:00
Anton Babushkin 63d81ba415 actuator_controls_effective topic removed 2013-11-16 23:16:09 +04:00
Anton Babushkin 39634d1001 px4io driver: bug fixed 2013-11-16 15:54:24 +01:00
Anton Babushkin 8f559c73e9 px4io driver: bug fixed 2013-11-16 16:07:06 +04:00
Anton Babushkin 45e158b88c Fixed actuator_controls_effective on FMU 2013-11-16 16:06:23 +04:00
Anton Babushkin e46d60ba6d px4io driver: don’t use PX4IO_PAGE_ACTUATORS page for actuator_controls_effective 2013-11-15 11:32:05 +04:00
Thomas Gubler ae9fae5aae fix MEAS airspeed and airspeed calibration 2013-11-10 19:25:38 +01:00
Lorenz Meier c63995e91c Hotfix: Be more aggressive about SPI2 init on v1 boards 2013-11-08 14:22:27 +01:00
Julian Oes 25bf1abecf pwm_output: Allow PWM values from 900us to 2100us but use a default of 1000us to 2000us 2013-10-31 10:29:06 +01:00
Lorenz Meier 9820ed9de3 Actually allow full range in FMU driver 2013-10-31 08:23:32 +01:00
Lorenz Meier 0eabacd251 Merge branch 'pwm_ioctls' of github.com:PX4/Firmware into pwm_ioctls 2013-10-30 22:35:09 +01:00
Lorenz Meier 727342a516 Teached the FMU driver that stopping is also an option 2013-10-30 22:34:51 +01:00
Lorenz Meier dc80d6745e Merge branch 'master' of github.com:PX4/Firmware into pwm_ioctls 2013-10-30 09:15:55 +01:00
Lorenz Meier 0fa03e65ab Cleanup of Doxygen tags 2013-10-28 15:21:50 +01:00
Andrew Tridgell 52ee477137 lsm303d: try to reset the lsm303d if it goes bad in flight 
this is based on earlier work by Julian Oes
 2013-10-28 13:10:52 +01:00
Andrew Tridgell 75a0c18a9e px4io: FMU half of px4io error fixes 2013-10-28 13:10:38 +01:00
Lorenz Meier fa1c5dd343 Merge branch 'master' of github.com:PX4/Firmware 2013-10-24 09:26:13 +02:00
Lorenz Meier 2cd9ad97ea Removed unnecessary return statements 2013-10-24 09:26:03 +02:00
Lorenz Meier 17ddc7f471 Merge pull request #483 from PX4/calib_rotation 
Calibration of rotated board
 2013-10-23 03:32:20 -07:00
James Goppert c4a1a338ff Changed driver to control motor duty cycle. 2013-10-22 05:43:27 -04:00
James Goppert 108d723a49 Removed old timing hack. 2013-10-22 05:10:26 -04:00