b2f28c977d
durandal-v1 Nuttx Based PX4 bootloader
...
durandal bootloader:Run at 480 Mhz
durandal-v1:bootloader use VBUS detection
Add Durandal bootloader to build
2019-11-16 11:43:42 +01:00
65a26ec060
nxp_fmuk66-v1:Port to NuttX 8.1+
2019-11-16 11:43:42 +01:00
e847698c9f
PX4 System changes Supporting STM32H7
...
stm32:ToneAlarmInterfacePWM TIM15-TIM17 have a BDTR Register
common:board_crashdump Add H7 support
stm32/board_mcu_version:Support H7
PX4 ADC:Use 32 interface and resoution abstraction
Added PX4 stm32h7 ADC driver
stm32h7:adc fix ADC ready check
fmu: handle BOARD_HAS_PWM==5
cmake: improve error handling for NuttX olddefconfig failures
WorkQueueManager:Quiet loadmon stack warning
camera_trigger:GPIO support < 6 GPIO
Adjust stack sizes (under hw stack check)
PX4 System changes Supporting STM32H7 PX4IO Driver
aerotenna_ocpoc:ADC add px4_arch_adc_dn_fullcount
init.cmake:Track Upstream change needing Make.def at config time
PX4 System changes Supporting STM32H7
NuttX CMakeLists.txt Track upstream changes
Common board_crashdump add header and px4 config
NuttX simplify callinb make libapps
Use UINT32_MAX for error return
drivers:uavcannode NuttX chip is now hardware
drivers:uavcanesc NuttX chip is now hardware
px4io:Avoid Race on AP to PX4 IO upgrade
2019-11-16 11:43:42 +01:00
36a75b79a4
uavcan:Changes to support Nuttx 7.31+
...
libuavcan:Update with Kinetis NuttX 8.1+ support
Traking master uavcan changes
2019-11-16 11:43:42 +01:00
522ed2d99b
NuttX based PX4 bootloader
...
stm32h7 booloader:Obey VBUS input
stm32h7 booloader:Fully deinit systic
2019-11-16 11:43:42 +01:00
78944a70c3
Upgrade NuttX to 8.2
...
Nuttx with PX4 contrib of bbsram fix
Nuttx 8.31+ with BBSRAM disable dcache
Nuttx 8.2-
2019-11-16 11:43:42 +01:00
933ff8d480
Remove duplicate EOF trailing newlines
...
because they can screw up git when merging branches.
2019-11-02 09:49:46 -04:00
1dd6b6a505
stm32f3: add libs and stubs for F3 build (thiemar_s2740vc-v1)
2019-10-30 11:48:47 +01:00
3b7c1b4ff1
src/drivers/boards: move to platforms/nuttx/src/px4/common
2019-10-30 11:48:47 +01:00
be7ed5e388
src/drivers/boards/common/{stm32,kinetis}: move under platforms/nuttx/src/px4
2019-10-30 11:48:47 +01:00
58e161347b
board_mcu_version: move to platforms/nuttx/src/px4
2019-10-30 11:48:47 +01:00
e7519c9fa0
board_identity: move to platforms/nuttx/src
...
And fix a potential alignment issue in board_get_mfguid and
board_get_px4_guid.
2019-10-30 11:48:47 +01:00
b30171ba8d
board_common.h: move under platforms/common
...
Also move board_determine_hw_info and board_gpio_init under platforms/nuttx
2019-10-30 11:48:47 +01:00
3198610f85
src/platforms: move all headers to platforms/common/include/px4_platform_common
...
and remove the px4_ prefix, except for px4_config.h.
command to update includes:
for k in app.h atomic.h cli.h console_buffer.h defines.h getopt.h i2c.h init.h log.h micro_hal.h module.h module_params.h param.h param_macros.h posix.h sem.h sem.hpp shmem.h shutdown.h tasks.h time.h workqueue.h; do for i in $(grep -rl 'include <px4_'$k src platforms boards); do sed -i 's/#include <px4_'$k'/#include <px4_platform_common\/'$k/ $i; done; done
for in $(grep -rl 'include <px4_config.h' src platforms boards); do sed -i 's/#include <px4_config.h/#include <px4_platform_common\/px4_config.h'/ $i; done
Transitional headers for submodules are added (px4_{defines,log,time}.h)
2019-10-30 11:48:47 +01:00
4192414576
clang-tidy: partially fix cppcoreguidelines-pro-type-reinterpret-cast
2019-10-28 10:50:31 -04:00
f4ee9141cb
DShot: updated driver to use NuttX DMA functions ( #13233 )
2019-10-25 09:49:03 +02:00
17551a99f8
io_timer: fix potential invalid memory access
2019-10-16 13:13:17 +02:00
8a9744d05a
dshot: allow boards to enable dshot only on a subset of the timers
2019-10-11 08:14:17 +02:00
d0a7490222
dshot: update timer generation before DMA request
...
This reloads the timer configuration before triggering DMA. Without that,
in rare cases, there were 17 bits sent instead of 16.
The 1. bit (1. pulse) was always wrong (too much), the rest of the bits
were the correct DShot packet that was meant to be sent.
2019-10-11 08:14:17 +02:00
7445c25fcc
dshot: check if DMA still in progress
...
No other functional change, just restructuring.
2019-10-11 08:14:17 +02:00
182efaa757
dshot: reduce static buffer size
...
And handle failures of up_dshot_init().
On Omnibus: reduces memory usage if dshot is enabled by ~1.0KB.
The buffer is roughly 1KB in size.
2019-10-11 08:14:17 +02:00
69c10dcaac
dshot: move implementation to a separate directory & library
...
So that the static memory overhead is not added to targets w/o dshot
2019-10-11 08:14:17 +02:00
23dbd9426a
dshot: handle dcache, flush cache before DMA transfer
2019-10-11 08:14:17 +02:00
3234aca53b
px4_micro_hal: add PX4_ARCH_DCACHE_LINESIZE definition
2019-10-11 08:14:17 +02:00
5bd9659301
stm32 timers: add dshot implementation
2019-10-11 08:14:17 +02:00
43fdcd7876
px4_middleware: remove that header and move px4::init to px4_init.h
...
delete include:
for i in $(grep -rl 'px4_middleware.h' src platforms); do sed -i '/#include <px4_middleware.h/d' $i; done
2019-08-30 07:59:44 +02:00
f32abe8534
src/platforms: move remaining source files to platforms/common
2019-08-30 07:59:44 +02:00
f8e0441e7b
src/platforms/common: move to platforms/common
...
Script to update include paths:
for i in $(grep -rl 'include <px4_work_queue' src platforms); do sed -i 's/#include <px4_work_queue/#include <px4_platform_common\/px4_work_queue/' $i; done
2019-08-30 07:59:44 +02:00
3bdfd8ce8d
ToneAlarmInterface: move to drivers/drv_tone_alarm
...
It belongs there since it's not a library providing the implementation, but
just declaring the interface.
2019-08-30 07:59:44 +02:00
f3fccf53f6
src/drivers/{kinetis,stm32}: move to arch-specific directories
2019-08-30 07:59:44 +02:00
3003e7d0fc
drv_led_pwm: move to arch-specific directory
2019-08-30 07:59:44 +02:00
bd1b267baa
NuttX hrt: move into arch-specific directory
2019-08-30 07:59:44 +02:00
1cb6c36a00
adc: refactor into arch-specific directories
2019-08-30 07:59:44 +02:00
ab43a83bed
platform: restructure (NuttX) architecture-specific code
...
updated: tone_alarm, px4io_serial, px4_micro_hal
2019-08-30 07:59:44 +02:00
0d71eeccbf
console buffer: write to log as 'boot_console_output' message
2019-06-04 11:57:54 +02:00
d947818654
console: add simple dmesg functionality (enable only on v5)
2019-06-04 11:57:54 +02:00
e9ca5d5aba
PX4 general work queue
2019-05-24 12:58:55 -04:00
dc73dd7bba
px4_init:Nuttx support boards without a console
2019-01-25 06:32:37 -08:00
8f308efa88
upstram NuttX CONFIG_EXAMPLES_NSH_CXXINITIALIZE->CONFIG_SYSTEM_NSH_CXXINITIALIZE
2019-01-25 06:32:37 -08:00
e7bf0e03d2
px4_nuttx_tasks:Support future removal of env.
...
CONFIG_DISABLE_ENVIRON can prevent task having to allocate
memory for the env.
2019-01-25 06:32:37 -08:00
320d2e9383
create PX4 platform layer initialization helper ( #11269 )
...
- starts requirements for PX4 modules (hrt, param, etc)
2019-01-22 14:13:20 -05:00
abb3817d31
boards new split VENDOR_MODEL naming convention
2018-11-26 14:40:14 -08:00
f692ad04d0
boards organization
2018-11-26 14:40:14 -08:00
246b879aea
require MODULE_NAME
2018-11-10 13:52:34 -05:00
ea3acb7121
cmake remove circular linking and reorganize
...
- px4_add_module now requires MAIN
- px4_add_library doesn't automatically link
2018-04-29 21:48:54 -04:00
2ff81393bc
move posix, nuttx, qurt components into platforms
2018-01-31 17:17:07 +01:00
David Sidrane