fly316/PX4-Autopilot
7
0
Fork 0
mirror of https://gitee.com/mirrors_PX4/PX4-Autopilot.git synced 2026-10-03 15:28:53 +08:00
Code Issues Packages Projects Releases Wiki Activity
43,475 Commits 852 Branches 161 Tags
84a7d42566b47070494fd2282edb6a8bbe81023c
Commit Graph
248 Commits
Author SHA1 Message Date
Matthias Grob 84a7d42566 rover build: correct differential drive kconfig name 2024-02-15 10:08:51 -05:00
fury1895 3de7d83e5f v6x board_sensors: publish system_power if ADC_ADS1115_EN is enabled 2024-02-08 16:11:34 +01:00
Vincent Poon 6dbb798e37 Change FMU-v6x REV 6 IMU Order 
Change IMU Order, make adis16470 in 1st priority.
 2024-02-02 05:49:21 -05:00
David Sidrane c07edd1d9a px4_fmu-v6x:Add Sensor set 8 2024-02-01 21:11:32 -05:00
Julian Oes 2cfdea2edb fmu-6x: fix Telem2 without flow control 
When flow control is used together with DMA, we need to add a pulldown
to CTS. Without it, it assumes flow control and gets stuck when
CTS is not connected.

Signed-off-by: Julian Oes <julian@oes.ch>
 2024-02-02 06:52:17 +13:00
David Sidrane 543454f12e stm32h7:ADC STM32_RCC_D3CCIPR_ADCSEL->STM32_RCC_D3CCIPR_ADCSRC 2024-01-30 18:07:57 -05:00
David Sidrane 84dddb5f40 px4_fmu-v6x:rc.board_sensors Use BOARD_HAS_HW_SPLIT_VERSIONING 2024-01-30 11:15:03 -05:00
David Sidrane 987d97d600 px4_fmu-v6x:HAVE_PM2 set by PX4_MFT_PM2 in manifest 2024-01-30 11:15:03 -05:00
David Sidrane 3057f7607f px4_fmu-v6x:Use hwbasecmp 2024-01-30 11:15:03 -05:00
David Sidrane 5ab92173f2 px4_fmu_v6x:Use common PAB manifest 2024-01-30 11:15:03 -05:00
David Sidrane 8ff4ed8321 px4_fmu-v6x:Use BOARD_HAS_HW_SPLIT_VERSIONING 2024-01-30 11:15:03 -05:00
Daniel Agar 2c81c9fdea boards: px4/fmu-{v5*,v6*} add dedicated rover board variants (eg px4_fmu-v6x_rover) 2024-01-24 14:06:49 -05:00
Daniel Agar 7fa6f4e32f boards: px4/fmu-v6x add dedicated multicopter build 2023-12-16 16:29:52 -05:00
Matthias Grob d85aaf4dfd v5x/v6x: save flash by not compiling analog OSD by default 2023-11-30 17:16:02 +01:00
PX4 BuildBot da8692c682 update all px4board kconfig 2023-11-27 20:05:50 -05:00
Julian Oes 19964d56ed fmu-6x: Use i2c_launcher by default 
This switches all SENS_EN_INAXXX params to 0 by default and instead uses
the i2c_launcher command.

However, if any one the SENS_EN_INAXXX param is set, it no longer tries
to auto-configure it.

Signed-off-by: Julian Oes <julian@oes.ch>
 2023-11-22 22:19:52 -05:00
Julian Oes fbc95ff4bd Add I2C driver launcher 
This is just a first draft of the launcher part.

Signed-off-by: Julian Oes <julian@oes.ch>
 2023-11-22 22:19:52 -05:00
PX4 BuildBot 047a5a7abf update all px4board kconfig 2023-11-17 09:14:46 -05:00
Julian Oes 19b681ca1f Remove SYS_USE_IO param 
The param is not really required anymore with the actuator
configuration. Also, when it is set to 0, RC doesn't work for some
boards which would be nice to avoid.

Signed-off-by: Julian Oes <julian@oes.ch>
 2023-11-10 12:17:23 +13:00
Konrad e4e2e6374a fmu-v6x: enable vtol takeoff again 2023-10-31 14:16:02 +01:00
David Sidrane 96ee73f295 px4_fmu-v6x:Rev 6 Sensors omit starting icm42688p, icm42670p, icm20649, icm20602 2023-10-18 20:55:46 -04:00
Peter van der Perk 019d232911 Add Zenoh pico support 2023-10-18 15:30:36 -04:00
Daniel Mesham e00b35e142 boards: default to custom participant for uXRCE-DDS client on Skynode 2023-10-05 08:03:21 +02:00
Silvan Fuhrer 563fd8427a boards: increase init stack size by 100B 
Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
 2023-10-02 09:37:06 +02:00
Niklas Hauser 43d859313b px4/fmu-v5/6x: Upstream power manager for FMU 
Detects and configures it correctly for the Auterion INA226-based power
modules.
 2023-09-27 10:39:31 -04:00
David Sidrane e920bfb188 px4_fmuv6x:Fit Rev6 Sensors 2023-09-21 16:22:44 -04:00
David Sidrane 9151d582ed px4_fmu-v6:Add Sensor Set Rev 6 2023-09-21 16:22:44 -04:00
Igor Mišić c1dbe177b8 boards: move FRAM emulated sector size to the 32-byte granularity (#21204) 2023-09-20 16:50:36 -04:00
Julian Oes f2bb548b27 6x: fix internal mag rotation 
From looking at the history the BMM150 rotation was initially 0. Then,
this was changed to 6 when the intent was to only change it for Skynode.

A bit later, the rotation was changed back to 0, but only for Skynode.

This tells me that rotation 0 was correct for all 6X including Skynode
all along.

Signed-off-by: Julian Oes <julian@oes.ch>
 2023-09-11 15:03:33 +12:00
Matthias Grob 0200ef9a60 Tools/auterion: add Skynode upload scripts (#21842) 2023-08-21 08:03:07 +02:00
Beat Küng 8e8b35dadf px4/fmu-v6x: disable batt_smbus for now to reduce flash 2023-07-24 13:10:31 +02:00
PX4 BuildBot db591f25a6 boards: update all NuttX defconfigs 2023-07-18 14:27:37 -04:00
Julian Oes 745fa3720e fmu-v6x: build battery status 
This is required to process data from the ADS1115 ADC and enables the
params BATx_I_CHANNEL and BATx_V_CHANNEL.

Testing is required whether this actually works on Pixhawk 6X though.

Signed-off-by: Julian Oes <julian@oes.ch>
 2023-07-07 13:40:58 +12:00
Vincent Poon e18da100ed Add ADC_ADS1115 Parameter to FMUv6x Default Build 
Adding ADC_ADS1115 Parameter to FMUv6x Default Build to allow FMUv6X user to use ADS1115 with Analog Power Modules.
 2023-07-07 13:40:58 +12:00
Beat Küng bae413a332 v6x: start mavlink on TELEM2 for skynode 
Equivalent to v5x
 2023-07-03 16:20:41 +02:00
Beat Küng c95539e8ce boards: increase init stack size by 150B 
External airframes need a bit more stack due to nested configs.
 2023-06-09 21:11:11 -04:00
Niklas Hauser ebe152fc22 fmu-v6x: Increase Mavlink UART buffers 
Our serial_test showed only ~84kB/s with the default 256 RX buffer size
with significant ~2.5ms periods of the flow control RTS pin being
asserted. Increasing size to 600 (same as FMU-v5x) brings the throughput
only to ~190kB/s, while a size of >1500 achieves ~350kB/s. Larger RX
buffers do not increase throughput anymore, while the theoretical
maximum is 375kB/s.

Transmit buffer size is increased to 10kB same as on FMUv5x to prevent
any future differences in queue behavior and throughput. serial_test
showed ~350kB/s throughput at 3kB TX buffer size, so this is just a
precaution.
 2023-06-01 07:55:21 +02:00
Julian Oes 40324b03f4 fmu-v6x: pulldown on RTS not required 
On CTS with DMA, we need the pulldown but not on RTS.

Signed-off-by: Julian Oes <julian@oes.ch>
 2023-05-05 02:49:25 -04:00
Beniamino Pozzan 9e5420bbbd microdds_client: rename to uxrce_dds_client 
| | old version | new version (second proposal) |
|-|-|-|
| module name | `microdds_client` | **`uxrce_dds_client`** |
| strings / comments about the module | non consistent | **UXRCE-DDS Client** |
| menuconfig option | `MODULES_MICRODDS_CLIENT` | **`MODULES_UXRCE_DDS_CLIENT`** |
| module parameters group name | `Micro XRCE-DDS` | **UXRCE-DDS Client** |
| module parameters name prefix | `XRCE_DDS_` | `UXRCE_DDS_` |
| module class name | `MicroddsClient` | **`UxrceddsClient`** |
|`init.d/rcS` whenever the module is mentioned | `microdds` | **`uxrce_dds`** |
| main doc page name | XRCE-DDS (PX4-FastDDS Bridge) | **uXRCE-DDS (PX4-micro XRCE-DDS Bridge)**|
| environment variable to have custom namespace in simulation | PX4_MICRODDS_NS | **PX4_UXRCE_DDS_NS** |

Signed-off-by: Beniamino Pozzan <beniamino.pozzan@phd.unipd.it>
 2023-05-03 11:51:53 -07:00
Thomas Stastny 82fd2987c9 fw pos control: revert name until we delineate this module a bit more (#21442) 2023-04-13 17:00:04 +02:00
Beat Küng a2ce73d39d px4/fmu-v6x: increase BL baudrate for flashing via uart to 1500000 2023-04-13 07:46:49 +02:00
Daniel Agar cbc067f235 boards: include INS drivers by default on PX4 FMU (eg VectorNav VN-100, VN-200, VN-300) 2023-04-06 14:06:57 -04:00
Daniel Agar 6ec2b902cc ROMFS: only copy bootloader binary if systemcmds/bl_update included 2023-03-16 09:43:56 -04:00
Marco Räth bdb0fe77d0 v6x: fix mag orientation for V6X009010 and V6X010010 (#21194) 2023-02-28 11:01:16 +01:00
Konrad 3e200bca0d fw_pos_control_l1: renaming to fw_path_navigation, l1 control is not used anymore, use a more generic naming. 2023-02-09 17:51:55 +01:00
FriedrichTuttasandDavid Sidrane 1830195d30 boards: px4_fmu-v6x add pulldowns to GPIO pins UART7 RTS and UART7 CTS (#20974) 
- https://github.com/PX4/PX4-Autopilot/issues/20762

Co-authored-by: David Sidrane <David.Sidrane@Nscdg.com>
 2023-01-21 10:19:57 -05:00
Daniel Agar 3822ef1519 boards: update all in tree bootloaders 2023-01-19 17:25:39 -05:00
Daniel Agar 45912066d2 fix copyright header year range 2023-01-14 09:16:16 -05:00
Tanja Baumann 0099523710 v6x: fix IMU rotations for V6X009010 and V6X010010 (#20901) 
And add V6X000010 (pixhawk base board)
 2023-01-13 14:09:35 +01:00
Daniel Agar 635daeed8a NuttX push jlink-nuttx into cmake and enable CONFIG_DEBUG_TCBINFO by default 2023-01-12 09:05:26 -05:00