fly316/PX4-Autopilot
7
0
Fork 0
mirror of https://gitee.com/mirrors_PX4/PX4-Autopilot.git synced 2026-04-14 10:07:39 +08:00
Code Issues Packages Projects Releases Wiki Activity
32,188 Commits 852 Branches 161 Tags
Commit Graph

144 Commits

Author SHA1 Message Date
Daniel Agar
7aa7f0ed95 switch remaining boards to new InvenSense IMU drivers 2020-04-07 09:59:12 -04:00
Daniel Agar
ad559a66a1 examples: add simple work_item example module 2020-04-06 09:43:55 -04:00
Daniel Agar
40b1043e12 NuttX boards minor lpwork and init stack increases 2020-04-02 23:39:17 -04:00
Daniel Agar
15332a7e56 boards: reduce CONFIG_NFILE_DESCRIPTORS 20 -> 15 2020-04-01 16:17:14 -04:00
Daniel Agar
ca81175b07 rename drivers/px4fmu -> drivers/pwm_out 
- split out header
 2020-03-31 19:12:31 -04:00
Peter van der Perk
9490f41f85 rddrone-uavcan146 removed shared clock between hrt & rtc 
Removed non-existing SW2 button
Fixed SW3 button pinmux
Added FlexCAN pin definition
hrt use external sirc clock
rtc use 32khz lpo clock
 2020-03-28 06:31:11 -07:00
Daniel Agar
44bec269b0 boards: update all NuttX configs CONFIG_NSH_MAXARGUMENTS 12 -> 15 2020-03-25 17:59:22 -04:00
Peter van der Perk
a4e6f96365
rddrone-uavcan146: HRT & RTC timer support 2020-03-25 16:37:28 -04:00
Beat Küng
7ea8dff8db spi: do not deselect other chip-selects 
And make sure on reset & init everything is deselected.

Reduces CPU load on a pixhawk cube by almost 1%.
 2020-03-24 09:46:20 -04:00
Beat Küng
6a41c9e417 refactor fxos8701cq: use driver base class 2020-03-24 09:46:20 -04:00
Beat Küng
5fa4cd1019 refactor fxas21002c: use driver base class 2020-03-24 09:46:20 -04:00
Daniel Agar
974cb30b6d nxp_rddrone-uavcan146 ignore i2c for now (platform support is incomplete) 2020-03-24 09:46:20 -04:00
Beat Küng
b156fe5787 boards: remove deprecated SPI + I2C defines from board_config.h 
chip-selects are deselected in stm32_spiinitialize()
 2020-03-24 09:46:20 -04:00
Beat Küng
f74474dd55 fmuk66-v3: fix spi bus numbering passing to px4_spibus_initialize 
Fixes an error on bootup ([boot] FAILED to initialize SPI port 0). Other
than that, everything was working.
 2020-03-24 09:46:20 -04:00
Beat Küng
6588dd0861 refactor icm20948: use driver base class 2020-03-24 09:46:20 -04:00
Beat Küng
00280d55c2 refactor rm3100: use driver base class 2020-03-24 09:46:20 -04:00
Daniel Agar
8738c26426
boards: enable NuttX SPI DMA buffers 
- update to NuttX with stm32f4 and stm32f7 SPI DMA internal buffers
 - remove explicit DMA buffer allocations from new IMU drivers
 - restore original BOARD_DMA_ALLOC_POOL_SIZE
 - decrease SPI DMA thresholds based on fmu-v2/v3/v4/v5 bench testing
 2020-03-22 19:24:26 -04:00
Beat Küng
8ebde51648 refactor hmc5883: use driver base class 
Removes the calibration on startup, as these values were overwritten by
the system calibration values anyway.
So the only difference is that if all calibration scales were equal to 1,
the driver startup would have failed.
 2020-03-17 23:31:17 -04:00
Beat Küng
47b329cc54 refactor bmm150: use driver base class 2020-03-17 23:31:17 -04:00
Beat Küng
1710cd9648 refactor px4flow: use driver base class 2020-03-17 23:31:17 -04:00
Beat Küng
aeadf54a74 refactor bmp280: use driver base class 2020-03-17 23:31:17 -04:00
Beat Küng
22a38453ab refactor bmi055: use driver base class 2020-03-17 23:31:17 -04:00
Beat Küng
969a77f889 refactor mpu6000: use driver base class 2020-03-17 23:31:17 -04:00
Beat Küng
be0a205438 refactor ist8310: use driver base class 2020-03-17 23:31:17 -04:00
Beat Küng
58f386a81c refactor pmw3910: use driver base class 2020-03-17 23:31:17 -04:00
Daniel Agar
f9794e99f8
move hover_thrust_estimator to new module (mc_hover_thrust_estimator) 
* MC_HTE: unitialize with hover_thrust parameter
* MC_HTE: constrain hover thrust setter between 0.1 and 0.9
* MC_HTE: integrate with land detector and velocity controller
* MCHoverThrustEstimator: Always publish an estimate even when not fusing measurements. This is required as the land detector and the position controller need to receive a hover thrust value.

* MC_HTE: use altitude agl threshold to start the estimator
local_position.z is relative to the origin of the EKF while dist_bottom
is above ground

Co-authored-by: bresch <brescianimathieu@gmail.com>
 2020-03-11 21:20:54 -04:00
Daniel Agar
46a09b711f boards: increase STDIO buffer size where we can afford it 2020-03-11 17:19:44 -04:00
Daniel Agar
505afc6063 boards: increase LPWORKSTACKSIZE 1536 -> 1600 2020-03-10 12:53:01 -04:00
Beat Küng
335623e11d SPI config: use enum to specify bus 2020-03-10 10:11:43 -04:00
Beat Küng
1851665fab boards: add new spi+i2c config 
Chip-select and SPI initialization uses the new config, whereas the drivers
still use the existing defines.

The configuration in board_config.h can be removed after all drivers are
updated.
 2020-03-10 10:11:43 -04:00
Daniel Agar
4698a09b98 delete unmaintained outback challenge (OBC) bottle drop example 2020-03-05 14:09:31 -05:00
David Sidrane
cad3a811d2 nxp_fmurt1062-v1:Run from OCRAM 2020-03-02 10:20:33 -08:00
David Sidrane
3ed643f3d7 fmurt1062-v1:Update imxrt_flexspi_nor_boot configurable 2020-03-02 10:20:33 -08:00
Daniel Agar
d7c3e1066a
uavcannode updates and px4_fmu-v4_cannode example 
- drivers/uavcannode add baro, mag, gps publications
 - delete old px4_cannode-v1 board
 - add stripped down simple rcS for CAN nodes
 2020-02-16 12:11:54 -05:00
Beat Küng
ccf2078c66 nxp/fmurt1062-v1: use hw description methods for timer configuration 2020-02-13 03:49:16 -08:00
Beat Küng
8cd9afc19a imxrt io_timer: remove some fields from io_timers_t and split out channel indexes 
IOMUX uses different enumeration from GPIO pin + port, so we cannot use
.gpio_out, and add a .gpio_portpin.
 2020-02-13 03:49:16 -08:00
Beat Küng
d74d094940 nuttx configs: disable nuttx timers which are used for PWM output 
These are not required, and to be consistent we enforce disabling them now.
 2020-02-13 03:49:16 -08:00
Beat Küng
c01f6811d0 nxp/fmuk66-v3: use hw description methods for timer configuration 2020-02-13 03:49:16 -08:00
Beat Küng
62b4f3487a io timer: remove some fields from io_timers_t and split out channel indexes 
- reduces amount of board configuration required
- removes the cyclic dependency between io_timers_t and timer_io_channels_t

Fixes a bug in the fmuk66-v3 config: the 2. timer has 3 channels associated
not 2.
Fixes a bug in the modelai config: the 2. timer has 4 channels associated.
 2020-02-13 03:49:16 -08:00
David Sidrane
2193cce50b rddrone-uavcan146:Board Added 2020-02-12 10:29:27 -05:00
Beat Küng
b399698306 ist8310: remove calibration code 
- it does nothing useful
- increases boot time by 2 seconds on pixhawk 4 due to a poll timeout:
IST8310 on I2C bus 3 at 0x0e (bus: 100 KHz, max: 400 KHz)
WARN  [ist8310] ERROR: TIMEOUT 2
 2020-02-06 12:39:39 -05:00
David Sidrane
78c7f98ef1 nxp_fmurt1062-v1:Memory Reorg 2020-01-29 13:54:20 -05:00
David Sidrane
962716a7c3 nxp_fmurt1062-v1:Performance tuning 2020-01-29 13:54:20 -05:00
David Sidrane
a8720057fd nxp_fmurt1062-v1:RC is on LPUART6 ttyS5 2020-01-29 13:54:20 -05:00
David Sidrane
eb30041958 nxp_fmurt1062-v1:PROBES:carry includes and path needed 2020-01-29 13:54:20 -05:00
David Sidrane
ef5ed2e43c nxp_fmurt1062-v1:OC remove Pull up - OC have series 47K 2020-01-29 13:54:20 -05:00
David Sidrane
ec0f004a7b fmurt1062-v1:Correct SPI1_DRDY4_ICM20602 2020-01-29 13:54:20 -05:00
David Sidrane
1fd2f27493 fmurt1062-v1:Add SPI4 RESET and SYNC 2020-01-29 13:54:20 -05:00
David Sidrane
1346312012 fmurt1062-v1:Add GPIO info 2020-01-29 13:54:20 -05:00
David Sidrane
5202724f19 fmurt1062-v1:Add nARMED Support 2020-01-29 13:54:20 -05:00