* test: add StickYaw unit test for unaided_yaw NaN transition bug
Adds a functional gtest that verifies the yaw setpoint does not jump
discontinuously when unaided_yaw transitions from finite to NaN.
Reproduces the bug fixed in #25710.
* test(StickYaw): clarify unaided_yaw NaN root cause in test comment
NaN originates from corrupted IMU delta_angle propagating through
OutputPredictor::calculateOutputStates() Euler extraction.
* boards: cuav/x25-super: add multi-instance heater support
Restore heater support removed in #26621 using the generic
multi-instance heater driver from #26325. Defines HEATER_NUM 2
for the two IMU heater outputs (PB10, PE6).
* boards: cuav/x25-super: fix heater IMU IDs and temp from hw test
Update defaults per @cuav-chen2 hardware testing:
- HEATER1_IMU_ID: 2818066 (SCH16T)
- HEATER2_IMU_ID: 3014698 (IIM42653)
- HEATER2_TEMP: 65°C
* Update boards/cuav/x25-super/init/rc.board_defaults
* navigator:MissionFeasibility rename checkFixedWindLandApproach() to checkFixedWingLandApproach()
Renames checkFixedWindLandApproach() to checkFixedWingLandApproach() to fix a typo in the function name.
This improves code readability and makes the function name consistent with the intended FixedWing landing approach logic, without changing behavior.
* navigator:MissionFeasibility rename checkFixedWindLandApproach() to checkFixedWingLandApproach()
Renames checkFixedWindLandApproach() to checkFixedWingLandApproach() to fix a typo in the function name.
This improves code readability and makes the function name consistent with the intended FixedWing landing approach logic, without changing behavior.
* heater: add multi-instance support, refactor parameter handling, remove legacy params file
This change introduces multi-instance heater support to allow independent temperature control for multiple IMUs.
Main changes:
- Add support for multiple heater instances
- Refactor parameter handling to use per-instance parameters
- Remove the legacy parameter file and migrate to the updated parameter structure
This improves scalability and makes heater configuration consistent across setups with multiple sensors.
* Refactor heater configuration across multiple boards
- Updated heater GPIO definitions to introduce a new naming convention for better clarity and consistency.
- Replaced `GPIO_HEATER_OUTPUT` with `GPIO_HEATER1_OUTPUT` and adjusted the corresponding output enable macros.
- Changed parameter names from `SENS_TEMP_ID` to `HEATER1_IMU_ID` in various board default configurations to reflect the new heater setup.
- Ensured all affected board configurations are updated to maintain functionality with the new heater definitions.
* heater: fix missing HEATER1_OUTPUT_EN control
* heater: fix more missing HEATER1_OUTPUT_EN control
* heater: tidy config, docs, and instance handling
- Remove unused controller period member and use CONTROLLER_PERIOD_DEFAULT
- Improve HEATER${i}_IMU_ID description and instance-related logging/behavior
- Add a guard when HEATER_NUM exceeds HEATER_MAX_INSTANCES
Note: drop intermediate/reverted change around the 'celsius' spelling.
* heater: refactor constructor to remove unused parameter and add instance name function
- Remove unused ModuleParams argument from Heater constructor
- Add heater_instance_name() helper to provide per-instance work queue task names
- Use instance-specific parameter lookup (HEATER{n}_*) during initialization
Use heater_instance_name() to label each instance (heater_1/2/3) in work queue.
Also drop unused ModuleParams argument from constructor and keep per-instance
parameter handle lookup in initialization.
* format
* board: update GPIO configuration for multiple heater instances, add HEATER_NUM for boards using PX4IO
* heater: update heater control to use HEATER1_OUTPUT_EN when using PX4IO for consistency
* heater: add a TODO for px4io multi-instance
* heater: update missing GPIO_HEATER1_OUTPUT in sky-drones
* heater: fix multiple newlines at EOF (resolve CI check failure)
* heater: switch to PublicationMulti for heater_status and log multi-instance
- Changed _heater_status_pub from Publication to PublicationMulti to support independent per-instance publications without overwriting.
- Updated logged_topics.cpp to use add_optional_topic_multi("heater_status")
This fixes the issue where multiple heater instances were writing to the same heater_status topic, causing data overwriting and incorrect update rates in logs.
---------
Co-authored-by: Jacob Dahl <dahl.jakejacob@gmail.com>
Co-authored-by: Jacob Dahl <37091262+dakejahl@users.noreply.github.com>
* Fixes potential bug if unaided yaw becomes nan during execution:
if unaided yaw becomes nan during execution the yaw correction would jumpt to 0 causing a large jump in yaw
the change removes this jump by holding the current yaw correction instead
* Remove Python extra paths from settings.json
Removed Python extra paths from VS Code settings.
The core_heater driver was written against the old CRTP ModuleBase<T>
pattern which was removed in ce3e62841fd. Replace with the
descriptor-based API matching src/drivers/heater/.
Signed-off-by: Ramon Roche <mrpollo@gmail.com>
Fix logic error where `mnt_mode_in` (value) was checked against `PARAM_INVALID`
instead of `param_handle`. This caused `param_get` to be called with an invalid
handle if the parameter was missing.
The SLPI drivers dsp_hitl and mavlink_rc_in hardcoded an include path
into the voxl2-default build output for MAVLink headers. This created
an undeclared cross-target dependency that required voxl2-default to be
built first.
Generate the MAVLink common dialect headers directly during the SLPI
build using mavgen.py, outputting to the SLPI build's own directory.
An INTERFACE library (mavlink_common_headers) propagates the include
paths and warning suppression flags to both drivers.
Signed-off-by: Ramon Roche <mrpollo@gmail.com>
* mavlink: add GLOBAL_POSITION message handling
- Add handler for incoming GLOBAL_POSITION MAVLink messages
- Publish received positions to aux_global_position uORB topic
- Update GLOBAL_POSITION stream to use aux_global_position topic
* correctly handle multi AGP in mavlink pub
* move from GLOBAL_POSITION to GLOBAL_POSITION_SENSOR
* mavlink: update submodule to include GLOBAL_POSITION_SENSOR in common.xml
os.scandir() returns entries in non-deterministic order, which caused
voxl2-slpi to sometimes build before voxl2_default (which it depends
on). Sort all os.scandir() calls lexicographically by name so the
shorter prefix voxl2 always precedes voxl2-slpi.
