Commit Graph
37 Commits
Author SHA1 Message Date
Daniel Agar 1ec10bfcc6 boards: disable CONFIG_ARMV7M_LAZYFPU again (#16573)
- this was causing hard faults on the CUAV Nora and possibly other boards, disabling everywhere until we fully understand the root cause
2021-01-17 22:40:21 -05:00
Daniel Agar cb74cb8692 boards: enable CONFIG_ARMV7M_LAZYFPU everywhere 2021-01-12 09:04:38 +01:00
Daniel Agar c60743b306 boards: NuttX increase file name max 32 -> 40 2020-11-08 12:51:59 -05:00
Daniel Agar 233949a377 NuttX upgrade to 10.0.0+ defconfig changes 2020-10-28 14:25:25 -04:00
David Sidrane ccc439504d px4_fmu-v4pro: Updates for NuttX 9.1.0+ External schedule_note 2020-09-16 21:32:04 -04:00
David Sidrane f98d10bf15 px4_fmu-v4pro Updates for NuttX 9.1.0-
px4_fmu-v4pro: defconfig MMCSD enable multiblock
2020-09-16 21:32:04 -04:00
Daniel Agar 2c3441aa90 boards: reduce CONFIG_NFILE_DESCRIPTORS 15 -> 12
- reduced now that calibration uses uORB::Subscription
 - can likely be reduced further (perhaps < 8) with additional testing
2020-08-21 10:12:13 -04:00
Daniel Agar e3d31a881e boards: NuttX disable posix message queues 2020-07-17 17:00:21 -04:00
Daniel Agar 5e7d2e830d boards: delete old board.h boilerplate 2020-06-08 19:10:33 -04:00
Daniel Agar 28d2aca699 boards: include all procfs entries on boards that aren't flash constrained 2020-05-01 20:59:57 -04:00
Daniel Agar 8d0c92003a boards: remove all CONFIG_NXFONTS_DISABLE* 2020-05-01 20:59:57 -04:00
Daniel Agar 66eacd24bc px4_fmu-v5_stackcheck: update stack sizes and add to Jenkins
- increase stack sizes to run cleanly under stackcheck
     - this is likely overkill for most boards, but using stackcheck to set our minimum ensures we have a very safe margin on regular builds and it's something we can currently afford
 - remove holybro_durandal-v1_stackcheck from test rack (there's only one unit)
2020-04-11 21:16:10 -04:00
Daniel Agar 40b1043e12 NuttX boards minor lpwork and init stack increases 2020-04-02 23:39:17 -04:00
Daniel Agar 15332a7e56 boards: reduce CONFIG_NFILE_DESCRIPTORS 20 -> 15 2020-04-01 16:17:14 -04:00
Daniel Agar 44bec269b0 boards: update all NuttX configs CONFIG_NSH_MAXARGUMENTS 12 -> 15 2020-03-25 17:59:22 -04:00
Daniel Agar 8738c26426 boards: enable NuttX SPI DMA buffers
- update to NuttX with stm32f4 and stm32f7 SPI DMA internal buffers
 - remove explicit DMA buffer allocations from new IMU drivers
 - restore original BOARD_DMA_ALLOC_POOL_SIZE
 - decrease SPI DMA thresholds based on fmu-v2/v3/v4/v5 bench testing
2020-03-22 19:24:26 -04:00
Daniel Agar 0ce9e113ff boards: stm32f4/f7 enable SPI_DMATHRESHOLD=32 2020-03-11 22:08:37 -04:00
Beat Küng 179c89b6bd board configs: extend board_dma_map.h with a table 2020-03-11 22:08:37 -04:00
Daniel Agar 6834f089cc px4_fmu-v4pro: cleanup board_dma_map.h 2020-03-11 22:08:37 -04:00
Daniel Agar 505afc6063 boards: increase LPWORKSTACKSIZE 1536 -> 1600 2020-03-10 12:53:01 -04:00
Beat Küng d74d094940 nuttx configs: disable nuttx timers which are used for PWM output
These are not required, and to be consistent we enforce disabling them now.
2020-02-13 03:49:16 -08:00
David Sidrane 514e1a3744 px4_fmu-v4pro:Fix USART6 RX DMA Assignment 2020-01-30 16:20:49 -05:00
Daniel Agar 709961ec8c InvenSense ICM20602 and ICM20608-G: new standalone optimized drivers
- uses the FIFO and SPI DMA to transfer full raw data (8 kHz gyro, 4 kHz accel)
 - new sensor messages for better visibility
   - sensor_{accel, gyro}_fifo: full raw data for optional logging and analysis
   - sensor_{accel, gyro}_status: metadata, clipping, etc
 - currently not enabled by default
2019-12-03 23:21:32 -05:00
Daniel Agar 99aae8b891 NuttX use toolchain math.h and avoid empty drivers/Kconfig 2019-11-16 11:43:42 +01:00
David Sidrane 7ce4f06470 px4:fmu-v4pro BSP Updated to NuttX 8.1+ 2019-11-16 11:43:42 +01:00
Daniel Agar 315141873e NuttX boards reduce CONFIG_MAX_TASKS 64 -> 32 (default) 2019-10-02 19:44:46 -04:00
Daniel Agar 0955fd2d58 NuttX boards reduce CONFIG_NFILE_DESCRIPTORS 54 -> 20 2019-08-07 21:23:27 -04:00
Daniel Agar 5421ef5535 NuttX increase HPWORK and LPWORK stack by 256 bytes 2019-08-06 23:15:07 -04:00
Daniel Agar 9d701a077d NuttX reduce stack for interrupts, HPWORK, LPWORK 2019-08-06 11:00:55 -04:00
Daniel Agar dc10a68539 NuttX and apps update 7.29 2019-07-10 12:58:35 -04:00
Daniel Agar bef7a9ba8e NuttX boards increase task limit 32 -> 64 (#12230) 2019-06-10 09:42:36 -04:00
Daniel Agar 5e6bfe1ad8 vscode updates
* working debugging (one click build and debug)
   * SITL jmavsim
   * SITL gazebo
   * jlink px4_fmu-v{2-5}
 * improved syntax highlighting
   * GNU linker files
   * ROS message files msg/*.msg
   * jinja2 template files
 * fixed intellisense support
2019-03-22 20:55:39 -04:00
Daniel Agar 7ccaf1068b px4_fmu-v4pro nsh compress defconfig 2019-03-21 08:41:01 -04:00
David Sidrane edd9f91a19 board:Set larger stack margin 2019-03-01 23:45:48 -05:00
David Sidrane 7e863456c4 px4_fmu-v4pro: Inital commit NuttX 7.27+ 2019-01-25 06:32:37 -08:00
Daniel Agar abb3817d31 boards new split VENDOR_MODEL naming convention 2018-11-26 14:40:14 -08:00
Daniel Agar f692ad04d0 boards organization 2018-11-26 14:40:14 -08:00