- refactor all EKF backend output predictor pieces into new OutputPredictor class
- output states are now calculated immediately with new high rate IMU rather than after EKF update
- IMU delayed sample is passed as around as control data to avoid storing an extra copy and make the requirement clear
- move EV yaw and EV position to new state machines
- EV yaw and EV pos now configured via EKF2_EV_CTRL (migrated from EKF2_AID_MASK)
- new EV position offset estimator to enable EV position while GPS position is active (no more EV pos delta fusion)
- yaw_align now strictly means north (no more rotate external vision aid mask)
- automatic switching between EV yaw, and yaw align north based on GPS quality
- respect new EKF2_EV_CTRL parameter for VPOS usage
- EV hgt rotate EV position before usage (there's often a small offset in frames)
- EV hgt reset use proper EV velocity body frame
- try to keep EV hgt and EV vel state machines consistent
- small incremental piece of https://github.com/PX4/PX4-Autopilot/pull/19128
- in a lot of cases this won't really matter, although you can see it in logs (especially with things like vehicle_at_rest), but it's something we might as well do properly
Co-authored-by: Mathieu Bresciani <brescianimathieu@gmail.com>
- update all msgs to be directly compatible with ROS2
- microdds_client improvements
- timesync
- reduced code size
- add to most default builds if we can afford it
- lots of other little changes
- purge fastrtps (I tried to save this multiple times, but kept hitting roadblocks)
- for accel/gyro/mag estimated bias only consider them stable (valid
for calibration updates) if the value isn't changing (10% of limit) over
the validity period
Also remove the legacy "range aid" than can be achieved by setting the
height reference to range finder and the range finder control parameter
to "conditional".
Conditional range aiding cal also be set when the height reference isn't
the range finder. This prevents the ratchetting effect due to switching
between references.
- replace float32[21] URT covariances with smaller dedicated position/velocity/orientation variances (the crossterms are unused, awkward, and relatively costly)
- these are easier to casually inspect and more representative of what's actually being used currently and reduces the size of vehicle_odometry_s quite a bit
- ekf2: add new helper to get roll/pitch/yaw covariances
- mavlink: receiver ODOMETRY handle more frame types for both pose (MAV_FRAME_LOCAL_NED, MAV_FRAME_LOCAL_ENU, MAV_FRAME_LOCAL_FRD, MAV_FRAME_LOCAL_FLU) and velocity (MAV_FRAME_LOCAL_NED, MAV_FRAME_LOCAL_ENU, MAV_FRAME_LOCAL_FRD, MAV_FRAME_LOCAL_FLU, MAV_FRAME_BODY_FRD)
- mavlink: delete unused ATT_POS_MOCAP stream (this is just a passthrough)
Co-authored-by: Mathieu Bresciani <brescianimathieu@gmail.com>
- all sources of optical flow publish sensor_optical_flow
- sensor_optical_flow is aggregated by the sensors module, aligned with integrated gyro, and published as vehicle_optical_flow
Co-authored-by: alexklimaj <alex@arkelectron.com>
The noise spectral density, NSD, (square root of power spectral density) is a
continuous-time parameter that makes the tuning independent from the EKF
prediction rate.
NSD corresponds to the rate at which the state uncertainty increases
when no measurements are fused into the filter.
Given that the current prediction rate of EKF2 is 100Hz, the
same tuning is obtained by dividing the std_dev legacy parameter by 10:
nsd = sqrt(std_dev^2 / 100Hz)
- sensor_baro.msg use SI (pressure in Pascals)
- update all barometer drivers to publish directly and remove PX4Barometer helper
- introduce baro cal (offset) mainly as a mechanism to adjust
relative priority
- commander: add simple baro cal that sets baro offsets to align with
GPS altitude (if available)
- create new sensors_status.msg to generalize sensor reporting
bresch