David Sidrane
2c4d1d8fe0
Add SK6812 Serial PWM LED DMA Driver
2021-01-23 09:30:59 -05:00
David Sidrane
64531c4521
Add SK6812 Serial PWM LED Driver
2021-01-23 09:30:59 -05:00
David Sidrane
f7aea05b19
Nuttx with STM32F4412 corrected pinmap
2021-01-23 09:30:59 -05:00
David Sidrane
1c0ed74d6a
platforms/nuttx/NuttX/nuttx net backports
2021-01-15 11:44:21 -08:00
Beat Küng
3e4b8763a5
nuttx: add mcp23009 gpio driver
2021-01-15 10:57:20 -05:00
David Sidrane
1e7dfe227a
stm32_common:board_hw_rev_ver Use Analog resistor detection
...
When the VER_DRIVE and REV_DRIVE are the same GPIO
we need to use Analog detection.
2021-01-15 10:57:20 -05:00
Daniel Agar
420ceb76fc
cmake: NuttX generated vscode launch.json requires DEBUG_DEVICE found
2021-01-14 10:32:26 -05:00
Daniel Agar
a894ca30e8
cmake: add STM32F412CE debug helper
2021-01-13 22:06:46 -05:00
David Sidrane
d04216aa48
Nuttx with stmf412 fixes
2021-01-13 22:06:46 -05:00
David Sidrane
2deef30d12
canbootloader:Add 48Mhz CAN Clock Settings
2021-01-13 22:06:46 -05:00
David Sidrane
54abd997de
canbootloader:Update to use NuttX
2021-01-13 22:06:46 -05:00
David Sidrane
271f87f8d2
canbootloader:Fixed Warning
2021-01-13 22:06:46 -05:00
David Sidrane
1cd36d4c8c
PX4 NuttX 10.0.0+ With IMX backports
2020-12-04 12:59:09 -05:00
David Sidrane
171cb7119e
nxp_imxrt,rt106x add imxrt_gpiosetevent
2020-12-04 12:59:09 -05:00
David Sidrane
e83a00c604
px4_manifest:Add Queries
2020-12-02 20:40:23 -05:00
David Sidrane
68ab736b16
Refactor mtd to make available to board startup
2020-12-02 20:40:23 -05:00
Daniel Agar
b50e6bda69
cmake: NuttX apps build updates
...
- NuttX Apps no longer generates the .built file
2020-11-11 12:06:39 -05:00
Alex Mikhalev
91d1825fcf
Fix non-determinstic boot hang with crashdumps
...
On boot, if board_hardfault_init finds a hardfault stored in BBSRAM, it
checks if there is any data available on stdin to see if there is
somebody there to respond to a prompt. But on boards such as cubeorange
where there is not a serial console by default, the ioctl fails and
bytesWaiting is uninitialized. So it will non-deterministally hang the
boot process with no outside feedback if that value is not zero.
Signed-off-by: Alex Mikhalev <alexmikhalevalex@gmail.com >
2020-11-05 12:41:01 -08:00
Martin Povišer
b0a73b5144
platforms/nuttx: change bash references
...
There is a platform, NixOS Linux, on which '/bin/bash' is not available.
This commit changes the interpreter to '/usr/bin/env bash' in some
scripts essential to firmware building.
2020-11-02 13:52:42 -05:00
Daniel Agar
d5894bea5c
cmake: NuttX debug skip SVD print if not found
2020-10-29 15:07:47 -04:00
Daniel Agar
216a0eb3a0
cmake: NuttX redirect libapps build stdout to log file
2020-10-29 15:07:47 -04:00
David Sidrane
8797823333
px4_init:Split out console init to create null device to be used in non PX4 platform bsp (bootloadres)
2020-10-28 14:25:25 -04:00
David Sidrane
021bc284c1
nxp:imxrt ADC track Rev02 of ref manual change made in upstream
2020-10-28 14:25:25 -04:00
David Sidrane
850e068aa3
Nuttx 10.0.0+
2020-10-28 14:25:25 -04:00
Matthias Grob
4378254182
Fix NuttX build under Cygwin
...
after NuttX 9.1.0+ upgrade #15139
2020-10-23 06:56:31 -07:00
CUAVcaijie
70b67ddbff
Add a USB ardupilot * type
2020-10-17 11:36:36 -04:00
David Sidrane
78221ee3d2
s32k1xx:Add PWM LED Support
2020-10-15 12:52:38 -07:00
David Sidrane
37e711c3fd
s32k1xx:io_timer: Enable output channels
2020-10-15 12:52:38 -07:00
Jari van Ewijk
61f9996d6b
S32K1XX: Report right MCU version
2020-10-15 12:52:38 -07:00
Jari van Ewijk
35dce9aff6
NXP UCANS32K: Add Support for PWM
...
S32K1XX HRT: Allow any channel of any FTM timer to be used
NXP UCANS32K: Enable additional FlexTimers and use FTM5 for HRT
NXP UCANS32K - Change FTM clocksource to system oscillator
NXP UCANS32K - Only need one FlexTimer and channel for PWM output
NXP UCANS32K will have only one PWM header by default
S32K1XX support FlexTimers beyond FTM3
S32K1XX io_timer.c - replace references to Kinetis
S32K1XX io_timer.c correct register names
S32K1XX input_capture.c and pwm_servo.c replace references to Kinetis
2020-10-15 12:52:38 -07:00
PX4 BuildBot
22a817d1fc
Update submodule nuttx to latest Wed Oct 14 19:20:05 EDT 2020
...
- nuttx in PX4/Firmware (8c8f594b24bddbb69c95772d80d51d3d62f4ad39): https://github.com/PX4/NuttX/commit/724aa6c1d3dda6cbb86f1461a79d2827870ece47
- nuttx current upstream: https://github.com/PX4/NuttX/commit/19c831f409c9d8e51e8b41e531cf658f2175a2e9
- Changes: https://github.com/PX4/NuttX/compare/724aa6c1d3dda6cbb86f1461a79d2827870ece47...19c831f409c9d8e51e8b41e531cf658f2175a2e9
19c831f 2020-10-14 David Sidrane - [BACKPORT] kinetis:flexcan fixed compile error clock_systimespec->clock_systime_timespec
2020-10-14 20:25:54 -04:00
David Sidrane
6416abc817
Nuttx with kinetis BP tix for socketcan
2020-10-14 09:50:24 -04:00
David Sidrane
17ada7cf32
Nuttx with arm stack fix backport
2020-10-12 19:56:00 -04:00
Daniel Agar
08bf71b73d
drivers/tone_alarm and tune_control small improvements/cleanup
...
- drivers/tone_alarm: move to ModuleBase and purge CDev (/dev/tone_alarm0)
- drivers/tone_alarm: only run on tune_control publication (or scheduled note) rather than continuously
- drivers/tone_alarm: use HRT to schedule tone stop (prevents potential disruption)
- msg/tune_control: add tune_id numbering
- systemcmds/tune_control: add "error" special case tune_id
- move all tune_control publication to new uORB::PublicationQueued<>
- start tone_alarm immediately after board defaults are loaded to fix potential startup issues
- for SITL (or other boards with no TONE output) print common messages (startup, error, etc)
2020-10-05 21:39:26 -04:00
Daniel Agar
23aa9ac70f
cmake nuttx add STM32H7 debug helpers
2020-10-02 11:31:18 -04:00
David Sidrane
529d816a39
px4_fmu-v6x:Support ETM Hardware Trace
2020-09-28 10:59:39 -04:00
PX4 BuildBot
b5df4f76cc
Update submodule nuttx to latest Sat Sep 26 15:30:26 UTC 2020
...
- nuttx in PX4/Firmware (59f5b841a6646a7ae514ae1139ba18c3f787ceb3): https://github.com/PX4/NuttX/commit/a8b7ca869e08e0ca58f20ae1e5732220ef98846f
- nuttx current upstream: https://github.com/PX4/NuttX/commit/0fe69f6cc0a6f202b61ff81be0560cafb8f3a89d
- Changes: https://github.com/PX4/NuttX/compare/a8b7ca869e08e0ca58f20ae1e5732220ef98846f...0fe69f6cc0a6f202b61ff81be0560cafb8f3a89d
0fe69f6cc0 2020-09-25 David Sidrane - [BACKPORT] stm32f7:serial Bug Fix: Ensure next buffer is processed
2020-09-26 09:47:03 -07:00
Daniel Agar
0a607bdc67
boards: CUAV CAN_GPS v1.2 cannode (stm32f412) with UAVCAN bootloader
2020-09-23 14:30:54 -04:00
Daniel Agar
e4a408bc55
cmake nuttx build modify copied nuttx repo .git to point to actual git dir
...
- this fixes builds that contain a px4io and use the Makefile generator rather than Ninja
2020-09-21 12:39:29 -04:00
Daniel Agar
940dc9cca0
cmake NuttX build fix path to git dir
...
- this relative path was incorrect for the px4io when using the Makefile generator and built for inclusion within another build (eg px4_fmu-v5_default)
2020-09-18 21:18:36 -04:00
David Sidrane
c948d41284
up_cxxinitialize:is now automatic in task start
2020-09-16 21:32:04 -04:00
David Sidrane
df30f29a55
NuttX/Make.defs.in Support PROBEs
2020-09-16 21:32:04 -04:00
David Sidrane
fbf110f6be
Use EXTRAFLAGS instead of EXTRADEFINES
2020-09-16 21:32:04 -04:00
David Sidrane
b2a31e15da
common:board_crashdump.c track upstream API change
2020-09-16 21:32:04 -04:00
David Sidrane
c49c767d78
NuttX add compiler dependent: disable no-stringop-truncation
2020-09-16 21:32:04 -04:00
David Sidrane
4d64065422
NuttX:Make.defs.in fix macro to not kill flock
2020-09-16 21:32:04 -04:00
David Sidrane
852d5ceb22
NuttX CMakeLists build .version file in build
2020-09-16 21:32:04 -04:00
David Sidrane
68e3fd9f37
cpuload Updates for NuttX 9.1.0-
2020-09-16 21:32:04 -04:00
David Sidrane
b32aab2d0f
platform Updates for NuttX 9.1.0-
2020-09-16 21:32:04 -04:00
David Sidrane
c57024e6bb
NuttX 9.1.0-
2020-09-16 21:32:04 -04:00