fly316/PX4-Autopilot
7
0
Fork 0
mirror of https://gitee.com/mirrors_PX4/PX4-Autopilot.git synced 2026-10-17 02:53:33 +08:00
Code Issues Packages Projects Releases Wiki Activity
43,859 Commits 852 Branches 161 Tags
267cb9906e90dfea4b1aebccc3a549ec60fc5a2d
Commit Graph
202 Commits
Author SHA1 Message Date
Julian Oes a9962dc44d boards: update all bootloaders 2024-05-22 18:18:55 +12:00
Jacob Dahl 70304fe715 [mavlink] Parameter to always start on USB (#22234) 
* usb: Added parameter to enable always starting mavlink on USB.

    Refactored cdcacm_init into a module and added a paramter to allow always starting mavlink on
    USB, also added a paramter to choose the mode. The current default behavior is to wait and listen
    for data on USB and auto-detect the protocol (mavlink, nsh, ublox). This results in the mavlink
    stream not starting until something else on the mavlink network sends a packet first. The new
    default behavior is to always start mavlink.

    Added parameters
    MAV_USB_ENABLE -- default 1 (always start mavlink on USB)
    MAV_USE_MODE -- default 3 (onboard)

* added 3 retries for opening serial port in mavlink, removed sleep before sercon

* added DRIVERS_CDCACM_AUTOSTART to ark-v6x default.px4board

* added CONFIG_DRIVERS_CDCACM_AUTOSTART=y to default.px4board for boards with CONFIG_CDCACM in their nsh/defconfig

* format

* remove PGA460 from COMMON_DISTANCE_SENSOR to save flash

* remove LIS2MDL from COMMON_MAGNETOMETER to save flash

* disable CONFIG_DRIVERS_CDCACM_AUTOSTART for fmu-v5 protected.px4board

* moved and renamed parameters, removed mode logic in mavlink

* changed parameter names, added mode none

* remove parameters from mavlink
 2024-05-20 12:35:29 -06:00
Matthias Grob 8579175013 Build new IO firmware binaries 2024-04-02 11:59:56 -04:00
Matthias Grob 1096384a38 px4iofirmware: don't switch to disarmed or failsafe value on disabled PWM outputs 
If the output is set to 0 then the FMU had this channel disabled/no function mapped
to it. In that case we do not want to suddenly start outputing failsafe or disarmed
signals.
 2024-03-25 19:21:54 +01:00
David Sidrane 543454f12e stm32h7:ADC STM32_RCC_D3CCIPR_ADCSEL->STM32_RCC_D3CCIPR_ADCSRC 2024-01-30 18:07:57 -05:00
Julian Oes 19b681ca1f Remove SYS_USE_IO param 
The param is not really required anymore with the actuator
configuration. Also, when it is set to 0, RC doesn't work for some
boards which would be nice to avoid.

Signed-off-by: Julian Oes <julian@oes.ch>
 2023-11-10 12:17:23 +13:00
Julian Oes aa87b2ef4d cubepilot: fix 4. Orange+ variant 
There was a missing then, and missing SPI definitions.

Signed-off-by: Julian Oes <julian@oes.ch>
 2023-10-06 08:02:03 +13:00
Silvan Fuhrer 563fd8427a boards: increase init stack size by 100B 
Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
 2023-10-02 09:37:06 +02:00
Igor Mišić c1dbe177b8 boards: move FRAM emulated sector size to the 32-byte granularity (#21204) 2023-09-20 16:50:36 -04:00
Daniel Agar 6bd13c5514 boards/cubepilot: cubeorange and cubeorangeplus include VectorNav INS 2023-09-15 16:32:40 -04:00
Julian Oes 70b48dd41c cubepilot: Add support for 4. variant of Orange+ 
This adds support for the 4. hardware variant of the CubeOrange+
featuring 3 ICM45686.

Signed-off-by: Julian Oes <julian@oes.ch>
 2023-09-05 11:07:09 -04:00
Beat Küng c95539e8ce boards: increase init stack size by 150B 
External airframes need a bit more stack due to nested configs.
 2023-06-09 21:11:11 -04:00
Beniamino Pozzan 9e5420bbbd microdds_client: rename to uxrce_dds_client 
| | old version | new version (second proposal) |
|-|-|-|
| module name | `microdds_client` | **`uxrce_dds_client`** |
| strings / comments about the module | non consistent | **UXRCE-DDS Client** |
| menuconfig option | `MODULES_MICRODDS_CLIENT` | **`MODULES_UXRCE_DDS_CLIENT`** |
| module parameters group name | `Micro XRCE-DDS` | **UXRCE-DDS Client** |
| module parameters name prefix | `XRCE_DDS_` | `UXRCE_DDS_` |
| module class name | `MicroddsClient` | **`UxrceddsClient`** |
|`init.d/rcS` whenever the module is mentioned | `microdds` | **`uxrce_dds`** |
| main doc page name | XRCE-DDS (PX4-FastDDS Bridge) | **uXRCE-DDS (PX4-micro XRCE-DDS Bridge)**|
| environment variable to have custom namespace in simulation | PX4_MICRODDS_NS | **PX4_UXRCE_DDS_NS** |

Signed-off-by: Beniamino Pozzan <beniamino.pozzan@phd.unipd.it>
 2023-05-03 11:51:53 -07:00
PX4 BuildBot b74e929877 update all px4board kconfig 2023-05-01 08:59:08 -04:00
Thomas Stastny 82fd2987c9 fw pos control: revert name until we delineate this module a bit more (#21442) 2023-04-13 17:00:04 +02:00
Julian Oes 0cfe135028 cubeorangeplus: enable bl_update 
This way the bootloader can be updated.

Signed-off-by: Julian Oes <julian@oes.ch>
 2023-04-10 15:19:25 +12:00
Julian Oes 728367a1dc cubeorange: enable bl_update 
This way the bootloader can be updated.

Signed-off-by: Julian Oes <julian@oes.ch>
 2023-04-10 15:19:25 +12:00
PX4 BuildBot 8306fb96ea boards: update all NuttX defconfigs 2023-03-24 10:03:14 -04:00
PX4 BuildBot efab9be488 update all px4board kconfig 2023-03-24 10:01:58 -04:00
Daniel Agar 6ec2b902cc ROMFS: only copy bootloader binary if systemcmds/bl_update included 2023-03-16 09:43:56 -04:00
Julian Oes 2605562a69 cubeorangeplus: add I2C4, start AK09918 
CubeOrange+ which have the ICM45686, also have the AK09918 connected
on the internal I2C4.

Signed-off-by: Julian Oes <julian@oes.ch>
 2023-03-14 08:34:28 -04:00
Julian Oes 7be3279675 cubeorangeplus: add check for SMPS support 
If NuttX is built without support for SMPS it can brick the hardware.
Therefore, I suggest that we add this additional compile-time check.

Signed-off-by: Julian Oes <julian@oes.ch>
 2023-03-13 22:54:41 -04:00
Julian Oes 36f430e385 cubeorangeplus: save some flash space 
We need to make space for drivers.

Signed-off-by: Julian Oes <julian@oes.ch>
 2023-03-13 22:53:56 -04:00
Julian Oes bee4fe9470 boards: sensor config for CubeOrange+ 
Signed-off-by: Julian Oes <julian@oes.ch>
 2023-03-13 22:53:56 -04:00
Daniel Agar b3eb563db4 boards: cubepilot_cubeorange_test restore sd_bench (used on test rack) 2023-02-13 23:53:54 -05:00
Julian Oes 5803f692b9 boards: update CubePilot+ test defconfig 
This is tracking upstream changes and making it build.

Signed-off-by: Julian Oes <julian@oes.ch>
 2023-02-13 22:36:22 -05:00
Julian Oes 01a9563955 cubeorangeplus: remove some modules to save flash 
Signed-off-by: Julian Oes <julian@oes.ch>
 2023-02-13 22:36:22 -05:00
Julian Oes 9d8fa38793 cubeorange: remove some modules to save flash 
Signed-off-by: Julian Oes <julian@oes.ch>
 2023-02-13 22:36:22 -05:00
Daniel Agar 70a7edbcd0 boards: cubepilot_cubeorange_default disable SIH simulator to save flash 2023-02-13 20:47:26 -05:00
Konrad 3e200bca0d fw_pos_control_l1: renaming to fw_path_navigation, l1 control is not used anymore, use a more generic naming. 2023-02-09 17:51:55 +01:00
Daniel Agar 3822ef1519 boards: update all in tree bootloaders 2023-01-19 17:25:39 -05:00
PX4 BuildBot 8d6a336b2c boards: update all NuttX defconfigs 2023-01-19 12:32:57 -05:00
PX4 BuildBot 898dbb96b4 update all px4board kconfig 2023-01-19 12:32:09 -05:00
Siddharth Bharat PurohitandJulian Oes 1c63d5666b boards: add support for CubeOrange+ (#20304) 
Co-authored-by: Julian Oes <julian@oes.ch>
 2023-01-17 20:55:57 -05:00
Daniel Agar 45912066d2 fix copyright header year range 2023-01-14 09:16:16 -05:00
Daniel Agar 635daeed8a NuttX push jlink-nuttx into cmake and enable CONFIG_DEBUG_TCBINFO by default 2023-01-12 09:05:26 -05:00
PX4 BuildBot e6c4416250 update all px4board kconfig 2023-01-07 21:53:01 -05:00
Daniel Agar dc5ce9b0ce boards: NuttX increase default CONFIG_ARCH_INTERRUPTSTACK 512->768 bytes 
- during casual testing on default configs the stack was penetration was reaching ~90% which is a bit too close for comfort
 - increasing by 50% to be conservative
 2023-01-07 12:07:35 -05:00
JaeyoungLimandSilvan Fuhrer 21e88f64b4 Add new fixed wing rate control module (fw_rate_control) 
* Fixedwing rate control into a separate module
* Start fw_rate_control for vtol
* Move over airspeed related parameters to fw_rate_control

Co-authored-by: Silvan Fuhrer <silvan@auterion.com>
 2023-01-04 11:14:00 -05:00
Daniel Agar 0fbb6db6d4 boards: update all NuttX defconfig (make all_olddefconfig) 2022-12-29 12:50:37 -05:00
Daniel Agar c2f15f5957 boards: update all px4boards (make all_px4_savedefconfig) 2022-12-29 12:50:37 -05:00
Daniel Agar f2cd7667dc systemcmds/bsondump: new command line utility (extracted from parameters) 2022-12-21 10:14:00 -05:00
Daniel Agar 41fa53605c boards: rebuild STM32H7 bootloaders and px4-io-v2 2022-12-09 11:02:21 -05:00
Daniel AgarPeter van der PerkDavid Sidranealexklimaj
 		2cb4ef0629 NuttX 10.3+ upgrade (#20190) 
Co-authored-by: Peter van der Perk <peter.vanderperk@nxp.com>
Co-authored-by: David Sidrane <David.Sidrane@NscDg.com>
Co-authored-by: alexklimaj <alex@arkelectron.com>
 2022-11-20 20:28:07 -05:00
Daniel Agar cea185268e msg ROS2 compatibility, microdds_client improvements (timesync, reduced code size, added topics, etc), fastrtps purge 
- update all msgs to be directly compatible with ROS2
 - microdds_client improvements
   - timesync
   - reduced code size
   - add to most default builds if we can afford it
   - lots of other little changes
 - purge fastrtps (I tried to save this multiple times, but kept hitting roadblocks)
 2022-10-19 19:36:47 -04:00
Daniel Agar b7fab39165 icm20948_i2c_passthrough: PX4_ERR is reset/configure fails and check temperature for validity 2022-09-23 19:16:10 -04:00
Daniel Agar 8f25acd428 sih remove gps and use standalone sensor_gps_sim 2022-09-09 18:00:50 -04:00
Daniel Agar bfe0d71a21 sih remove baro and use standalone sensor_baro_sim 2022-09-09 18:00:50 -04:00
Daniel Agar c5336abba2 sih remove mag and use standalone sensor_mag_sim 2022-09-09 18:00:50 -04:00
Daniel Agar bcdd2203d3 delete systemcmds/motor_test and msg/test_motor.msg 2022-09-09 09:14:09 -04:00