* [Docs] PX4 v1.16 Add warning for RTL mode issues in return.md
Added a warning about known issues with RTL mode during fixed-wing approaches and landings.
* Apply suggestion from @hamishwillee
* Apply suggestion from @hamishwillee
* hrt: Fix PPM input on channel 2
The CCMR1_PPM define for PPM input on channel 2 was incorrectly set to 2,
which was setting bits for channel 1 instead of channel 2. This prevented
PPM input from functioning properly on channel 2.
Changed CCMR1_PPM for channel 2 from 2 to (1 << 8), which correctly
configures the CC2S bits for input capture mode on TI2.
This fixes an issue noted in the existing code comment:
"FIXME! There is an interaction in the CCMR registers that prevents
using Chan 1 as the timer and chan 2 as the PPM"
Tested on STM32H743 with PPM input on PC7 (TIM8_CH2).
* rc_input: enable sharing serial and PPM pin
By setting RC_SERIAL_PORT_SHARED_PPM_PIN_GPIO_RX it is now possible to
use the same pin on the STM32 for PPM input as well as serial input.
* boards: Add support for Holybro KakuteH7-Wing
---------
Co-authored-by: Julian Oes <julian@oes.ch>
* Rescale throttle curve to HTE as option
* Add slew rate to hover thrust estimate
* Update docs to reflect changes
Fix formating
* mc_att_control: suggestions for hover thrust slewing
- Slower slew rate
- Move update of hover thrust estimate into main loop
- Make sure dt for slew rate is correct
- Apply parameter updates if hover thrust estimate not used
- Parameter description in metadata files
* fix: Rescaling cases order
* Rescale to HTE estimate by default
* Update src/modules/mc_pos_control/multicopter_position_control_params.c
Co-authored-by: Mathieu Bresciani <brescianimathieu@gmail.com>
* Fix hte sub name
* Update MPC_THR_CURVE description
* Swap thr curve values to make hte rescaling default for value 0
---------
Co-authored-by: Matthias Grob <maetugr@gmail.com>
Co-authored-by: Mathieu Bresciani <brescianimathieu@gmail.com>
* Updated Encrypted logs docs to reflect https://github.com/PX4/PX4-Autopilot/pull/24489
* Subedit
* Subedit the key generation bit
* Updated the docs with multiple command line args for the decryptor and added OpenSSL as a requirement
* Subedit
* Update log_encryption.md
---------
Co-authored-by: Hamish Willee <hamishwillee@gmail.com>
* ci: fix markdown flaw check ci
Signed-off-by: Ramon Roche <mrpollo@gmail.com>
* docs: fix typo
intentionally touching this file to trigger ci
Signed-off-by: Ramon Roche <mrpollo@gmail.com>
* ci: fix path error
Signed-off-by: Ramon Roche <mrpollo@gmail.com>
* ci: intentionally touch
Signed-off-by: Ramon Roche <mrpollo@gmail.com>
* ci: check if exectuion is right
Signed-off-by: Ramon Roche <mrpollo@gmail.com>
* ci: debug with tmate
Signed-off-by: Ramon Roche <mrpollo@gmail.com>
---------
Signed-off-by: Ramon Roche <mrpollo@gmail.com>
* Add vitepress tree
* Update existing workflows so they dont trigger on changes in the docs path
* Add nojekyll, package.json, LICENCE etc
* Add crowdin docs upload/download scripts
* Add docs flaw checker workflows
* Used docs prefix for docs workflows
* Crowdin obvious fixes
* ci: docs move to self hosted runner
runs on a beefy server for faster builds
Signed-off-by: Ramon Roche <mrpollo@gmail.com>
* ci: don't run build action for docs or ci changes
Signed-off-by: Ramon Roche <mrpollo@gmail.com>
* ci: update runners
Signed-off-by: Ramon Roche <mrpollo@gmail.com>
* Add docs/en
* Add docs assets and scripts
* Fix up editlinks to point to PX4 sources
* Download just the translations that are supported
* Add translation sources for zh, uk, ko
* Update latest tranlsation and uorb graphs
* update vitepress to latest
---------
Signed-off-by: Ramon Roche <mrpollo@gmail.com>
Co-authored-by: Ramon Roche <mrpollo@gmail.com>
