b2a81ed35b
multi diff pres sensor publication and logging
2017-08-19 22:49:29 +02:00
8db2883d84
delete unused tones
2017-08-19 09:50:41 +02:00
4462869432
Add support to new fields in command_ack
2017-08-19 09:04:52 +02:00
c200d0e9a4
Keep initialization of outgoing vehicle_command_s consistent
...
All others are initialized this way.
2017-08-19 09:04:52 +02:00
236021cc01
vmount mavlink input: fix polling for position_setpoint_triplet
...
The code was violating the rule 'every successfull poll must be followed
by an orb_copy'.
The result was a busy loop.
2017-08-17 07:47:48 +02:00
25bbe76530
FW att ctrl - Fix vehicle_attitude_setpoint timestamp logging when in stabilized ( #7803 )
2017-08-16 20:38:19 -04:00
63306ada92
FW attitude and position control minor code cleanup ( #7802 )
...
- change a little bit to make the code more readable
2017-08-16 10:51:41 -04:00
ebafa5698d
log_writer_file: register hardfault handler before opening the log file
...
hardfault_store_filename() opens and closes a file descriptor, so if we do
it before opening the log file, we need one file descriptor less
2017-08-16 16:46:56 +02:00
9e01842c6a
mavlink ulog: advertise ulog_stream topic before subscribing to ulog_stream_ack
...
This reduces the maximum number of needed file descriptors by 1 when using
ulog streaming.
2017-08-16 16:46:56 +02:00
ba150566c6
mavlink_command_sender: add some log printfs
...
This improves the printfs which will be logged. This should improve to
debug the camera triggering. The debug printfs are disabled by default.
2017-08-16 09:47:50 +02:00
31edab6d6d
mavlink_command_sender: remove unused include
2017-08-16 09:47:50 +02:00
33e67fd527
Disable PA during landing
2017-08-16 08:19:06 +02:00
e6c942033b
Disable pusher assist when descending
2017-08-16 08:19:06 +02:00
8f5293d7b0
Remove explicit pusher throttle setting
2017-08-16 08:19:06 +02:00
33efd89ef8
Disable pusher assist for quadchute failsafe
2017-08-16 08:19:06 +02:00
66bb7adc4c
simplify back transition throttle scaling
2017-08-16 03:06:13 +02:00
6b9a8daceb
Correctly name b_trans_thr and remove contraint
2017-08-16 03:06:13 +02:00
ff669ee645
Move vtol standard params
2017-08-16 03:06:13 +02:00
7a8d3c4ab2
Correctly check reverse thrust conditions
2017-08-16 03:06:13 +02:00
4396e78d12
Allow negative thrust on reverse throttle
2017-08-16 03:06:13 +02:00
01d9212a29
Widen pusher throttle constraint
2017-08-16 03:06:13 +02:00
e5a55cd142
Support negative thrust for back transition
2017-08-16 03:06:13 +02:00
59d81ee0f1
Clarify parameters
2017-08-16 03:06:13 +02:00
fbbe3d1f41
Check velocity valid and param description
2017-08-16 03:06:13 +02:00
50894e8615
VTOL control back transition ramp up time
2017-08-16 03:06:13 +02:00
560e9e88dc
Apply slew rate to reverse thrust
2017-08-16 03:06:13 +02:00
e9516db5b0
Back transition duration based on deceleration m/s/s
2017-08-16 03:06:13 +02:00
2e481867e5
Consider back transtition complete when MPC_XY_CRUISE is reached
2017-08-16 03:06:13 +02:00
1a0c23d8b3
Support thrust reversal for vtol back transition
2017-08-16 03:06:13 +02:00
f50052f290
landdetector mc: widen acceptance threshold after landing instead of arming
2017-08-15 10:30:29 +02:00
861879c6d3
Widen threshold for standard gyro consistency check
...
Without temperature compensation the default is too narrow.
2017-08-12 12:50:46 +02:00
67e470b0e1
px4fmu-v5:Use arch/polarity agnostic Power control macros
...
Use the board supplied Power control macros, in the
the board_peripheral_reset.
This abstacts the polarity from the code. Therefore changes
in signal sense can be made, just in the board config.
2017-08-12 08:02:41 +02:00
5506588a31
px4fmu-v5:Add conditional support for Test RC00 HW
...
RC00 had an active high VDD_5V_PERIPH_EN
PC01 has an active low VDD_5V_PERIPH_EN
RC00 Test hardware did not use an LTC4417
While RC00 HW is still in circulation you can build with
PX4_FMUV5_RC00 defined and BOARD_HAS_LTC4417 undefined.
The default is PX4_FMUV5_RC01 and BOARD_HAS_LTC4417 defined.
2017-08-12 08:02:41 +02:00
55a2930cdb
vmount: reduce stack size to 1900 as recommended by @bkueng (maximum used memory observed: 1552)
2017-08-11 14:37:48 +02:00
b702daf40e
vmount: virtual destructor
2017-08-11 14:37:48 +02:00
c3faf587cc
vmount: make the parameter descriptions a little nicer
2017-08-11 14:37:48 +02:00
281ee5e5af
vmount: increase stack size
2017-08-11 14:37:48 +02:00
b8d389ca4e
vmount: properly unadvertise uorb topics when stopping or re-configuring vmount. Othwerise subsequent advertise calls may fail (only ever witnessed for _mount_orientation_pub)
2017-08-11 14:37:48 +02:00
cbe3627b8c
vmount: set more sensible default parameters for the mount system and component IDs
2017-08-11 14:37:48 +02:00
89aeea7e8e
vmount: publish mount angle commands in proper order and units
2017-08-11 14:37:48 +02:00
4eb0ffc554
vmount: update control_data if already_active is true
...
control_data needs to be able to be set to nullptr in case if the input
is already active. Otherwise the output will think there's always new
requests and reset it's state.
2017-08-11 14:37:48 +02:00
73d23742ea
vmount: rate-limit the update of the outputs
...
This avoids a busy-loop if the input is listening for vehicle commands and
the output publishes vehicle commands.
2017-08-11 14:37:48 +02:00
923cdbcbfb
vmount mavlink input: process commands only if the target matches our sys & comp id
2017-08-11 14:37:48 +02:00
fd05c09447
vmount: fix param types, use int32_t
2017-08-11 14:37:48 +02:00
6e35cb002f
PX4IO interface protocol: Fix rounding error
...
Issue: This conversion test failed with gcc 7.1.1 and clang 4.0.1:
```
ERROR [tests] conversion fail: input: -0.8188, intermediate: -8187, result: -0.8187
conv FAILED
Command 'tests' failed, returned -1
```
Fix: explicit rounding
2017-08-10 03:09:33 -04:00
aa9023b72e
COM_RC_STICK_OV fix broken metadata
2017-08-09 22:28:05 +02:00
1cc7f47003
COM_FLTMODE* add param group
2017-08-09 22:28:05 +02:00
6ddd7ea8ab
RC_MAP_FAILSAFE add missing group
2017-08-09 22:28:05 +02:00
353f637e92
move SYS_FMU_TASK to px4fmu
2017-08-09 22:28:05 +02:00
928fdf34a6
sensors move THR_MDL_FAC and MOT_SLEW_MAX to px4fmu
2017-08-09 22:28:05 +02:00
Daniel Agar