fly316/PX4-Autopilot
7
0
Fork 0
mirror of https://gitee.com/mirrors_PX4/PX4-Autopilot.git synced 2026-05-02 05:04:08 +08:00
Code Issues Packages Projects Releases Wiki Activity
40,604 Commits 852 Branches 161 Tags
Commit Graph

40604 Commits

This Branch
This Branch
All Branches
Author SHA1 Message Date
Julian Oes
e15cbc3a6b Mantis: move tap_esc to extras 
This way we work around an issue where tap_esc got stuck during bootup
in a cold boot.
 2022-01-10 23:04:10 -05:00
Julian Oes
24bdf79180 ROMFS: fix debug output 2022-01-10 23:04:10 -05:00
Julian Oes
c2e0e09b2d commander: reduce PWM max again 
This is no longer required now.
 2022-01-10 23:04:10 -05:00
Julian Oes
e4763f15f6 Mantis: add RC hacks 
This changes the way RC is handled for the Mantis:
- The RC values are re-written when arriving over MAVLink. They are
  rescaled from 0..4095 to 1000..2000 and the channel bits added to
  separate channels. This makes the downstream handling easier.
- Gimbal pitch is moved from Aux1 to Aux2 as that should be the default.
- Aux3 and Aux4 are used for the photo and video trigger.
- The speed button is used as the FLTMODE channel and set to switch
  between POSCTL and ALTCTL.
 2022-01-10 23:04:10 -05:00
Julian Oes
9fe7a40673 manual_control: enable sending camera commands 2022-01-10 23:04:10 -05:00
Julian Oes
1754e25920 vmount: add param to use RC input for angular rate 
Until now RC input was translated to angles only. I added the param
MNT_RC_IN_MODE which allows the RC input to be used for angular rate.
 2022-01-10 23:04:10 -05:00
Julian Oes
f03990f015 Mantis: prevent output setup from running 
This is not required as we start tap_esc directly and load the mixer.
 2022-01-10 23:04:10 -05:00
Julian Oes
cb15728536 Mantis: save mission in RAM 
This is using a reduced number of mission items of 1000 instead of 2000
in order to fit in RAM.
 2022-01-10 23:04:10 -05:00
Julian Oes
7d09635fb6 ROMFS: add option for dataman args 
This is required for boards requiring dataman in RAM.
 2022-01-10 23:04:10 -05:00
Julian Oes
bb09646b41 ROMFS: allow the output config to be skipped 
This is required for the ATL Mantis-EDU.
 2022-01-10 23:04:10 -05:00
Julian Oes
0fbb03dee1 ROMFS: add option for startup tune volume 
Otherwise the CBRK_BUZZER param does not work as it should.
 2022-01-10 23:04:10 -05:00
Julian Oes
a50f7af3b1 Mantis: update bootloader and SYS_AUTOSTART 
This adds a check for the previous SYS_AUTOSTART id. If it is still the
old/previous SYS_AUTOSTART id, it will flash the new bootloader as well
as set the proper SYS_AUTOSTART id.
 2022-01-10 23:04:10 -05:00
Julian Oes
fa282cfe86 Mantis: make startup less loud 2022-01-10 23:04:10 -05:00
Julian Oes
880292f5d7 commander: relax RC min/max 2022-01-10 23:04:10 -05:00
Julian Oes
2b4b87571c Mantis: adapt RC calibration 
This is with a newer RC firmware.
 2022-01-10 23:04:10 -05:00
Julian Oes
aa007dadee commander: fix emergency power off 
From what I can see the CONFIG_BOARDCTL_POWEROFF is not really used
anywhere, however, the BOARD_HAS_POWER_CONTROL is something that is set,
e.g. for the Mantis, to allow power off.
 2022-01-10 23:04:10 -05:00
Julian Oes
6301fa35c1 commander: add command to power off 2022-01-10 23:04:10 -05:00
Julian Oes
4a43155e69 Mantis: remove duplicate define 2022-01-10 23:04:10 -05:00
Julian Oes
7759ffb00e Mantis: reduce power button hold time 
This is more intuitive and matches the tune.
Hopefully, it's still long enough to prevent any false positives.
 2022-01-10 23:04:10 -05:00
Julian Oes
6960600c28 Mantis: play power off tune 
To play a power off tune, I needed to convert the file to C++, so that I
could use the uORB::Publication.

The current implementation starts playing the power off sound but then
stops it as soon as the button is released.

The problem is mostly that we only get an interrupt when the button is
pressed or released but we don't seem to be able to poll it, at least
not in the current state.
 2022-01-10 23:04:10 -05:00
Julian Oes
860b23dd17 tunes: add tune to power off 
This is used by the ATL Mantis EDU to help the user realize when the
drone is powered off.
 2022-01-10 23:04:10 -05:00
Julian Oes
a21fefda48 tune_control: prevent segfault 2022-01-10 23:04:10 -05:00
Julian Oes
856e229482 ROMFS: reset the startup sound for Mantis 2022-01-10 23:04:10 -05:00
Julian Oes
1be4e35ed4 ROMFS: move startup sound further down 
This way it works for the Mantis where the tap_esc driver needs to be
running before beeping is posssible.
 2022-01-10 23:04:10 -05:00
Julian Oes
76920171c7 tap_esc: fix tunes 
This removes the redundant _play_tone flag and instead just polls the
next_note() interface to check if there is something to play.
 2022-01-10 23:04:10 -05:00
Julian Oes
de1849167d Mantis: Add upload_wifi target to upload firmware 2022-01-10 23:04:10 -05:00
Julian Oes
185e4cfd48 Mantis: set range finder limits, and min quality 
The limits might somewhat match the sensor, guessed based on the
original driver.

The quality is set so that spikes when sitting on the ground are not
used.
 2022-01-10 23:04:10 -05:00
Julian Oes
dd00e43ca3 mavlink: set signal_quality (and sane variance) 
Otherwise this distance data is actually not used at all.
 2022-01-10 23:04:10 -05:00
Julian Oes
aefbd80b53 mavlink: use optical flow limits from params 
This makes more sense than hard-coding arbitrary values.
 2022-01-10 23:04:10 -05:00
Julian Oes
f48c3a2cc6 mavlink: don't handle RC_CHANNELS 
This is a status/output but should not be an input for the autopilot.
Instead RC_CHANNELS_OVERRIDE should be used.
 2022-01-10 23:04:10 -05:00
Daniel Agar
cc1fee525a lib/sensor_calibration: handle calibration slot change on parameter update 2022-01-10 17:16:50 -05:00
Daniel Agar
ab547bb982 sensors/vehicle_angular_velocity: RPM notch don't fully disable if first harmonic frequency drops below minimum frequency 
- keep higher frequency harmonics enabled per ESC
 - cleanup timestamp handling (timeouts, etc)
 2022-01-10 14:51:29 -05:00
Daniel Agar
b58922a5d7 sensors/vehicle_angular_velocity: notch filters automatically reset on sufficient parameter change 2022-01-10 14:51:29 -05:00
Daniel Agar
7d632254be NotchFilter push initialization/reset into filter 
- this simplifies the reset by allowing a notch filter to reset as
needed
 - improves cascade initialization, on reset each filter will reset
properly from the previous
 2022-01-10 14:51:29 -05:00
Daniel Agar
2e2ac36cab
drivers/uavcan: make firmware server available on both CAN1/CAN2 always (if enabled) 
- uavcan firmware server no longer shuts down when arming (nodes might restart in flight)
 - always handle UAVCAN parameters with or without the FW server active
 - remove legacy ESC enumeration in FW server
 2022-01-10 11:13:02 -05:00
Daniel Agar
d9e7315420 sensors: automatically set initial accel/gyro calibration if stable bias available 2022-01-10 10:46:37 -05:00
Daniel Agar
e731fcdbc0
sensors (accel/gyro/mag) determine if external with device id 2022-01-10 10:31:07 -05:00
Daniel Agar
45040be669 ekf2: accel/gyro/mag sensor cal minor cleanup 
- cleanup obsolete comments
 - remove debug helpers
 - add additional variance requirements to mag bias stable (matching accel & gyro)
 2022-01-10 09:55:59 -05:00
Daniel Agar
c3ca40a98f drivers/px4io: delete monitor command 
- the px4io console isn't even connected on most flight controllers
 2022-01-10 09:51:11 -05:00
Daniel Agar
e5d49f6fff drivers/px4io: delete unused detect 2022-01-10 09:51:11 -05:00
Daniel Agar
d077ca15fb delete PWM_SERVO_SET, PWM_SERVO_SET_MODE, systemcmds/motor_ramp, and pwm_out test 2022-01-10 09:51:11 -05:00
Daniel Agar
df44df2df6 delete systemcmds/esc_calib 
- this is redundant with commander esc_calibration
 2022-01-10 09:51:11 -05:00
Daniel Agar
03bdc460d8 drivers/px4io: PWM_SERVO_GET_FAILSAFE_PWM don't get registers directly 2022-01-10 09:51:11 -05:00
Daniel Agar
d3301ba826 delete PWM_SERVO_GET_TRIM_PWM 2022-01-10 09:51:11 -05:00
Daniel Agar
8de59dad32 delete PWM_SERVO_SET_TERMINATION_FAILSAFE 2022-01-10 09:51:11 -05:00
Daniel Agar
1739ecc981 delete PWM_SERVO_SET_FORCE_FAILSAFE 2022-01-10 09:51:11 -05:00
Daniel Agar
649d3e3f55 delete PWM_SERVO_SET_DISABLE_LOCKDOWN/PWM_SERVO_GET_DISABLE_LOCKDOWN 2022-01-10 09:51:11 -05:00
Daniel Agar
b7ed4fd3e0 delete PWM_SERVO_SET_DISARMED_PWM 2022-01-10 09:51:11 -05:00
Daniel Agar
551a31ce2f delete PWM_SERVO_SET_FAILSAFE_PWM 2022-01-10 09:51:11 -05:00
Daniel Agar
daa925137c boards: move default battery calibration defines to parameter defaults 2022-01-10 09:49:36 -05:00