fly316/PX4-Autopilot
7
0
Fork 0
mirror of https://gitee.com/mirrors_PX4/PX4-Autopilot.git synced 2026-10-25 22:43:34 +08:00
Code Issues Packages Projects Releases Wiki Activity
48,229 Commits 852 Branches 161 Tags
purge_protocol_version
Commit Graph
28662 Commits
Author SHA1 Message Date
Julian Kent fc6b61dad1 Try 'min' for units 2021-01-18 16:26:53 +01:00
Julian Kent d99d52960e Fix default _rtl_xxx values 2021-01-18 16:26:53 +01:00
Julian Kent 5a9fe312b5 Fix test failure on rebase: set lpos valid 2021-01-18 16:26:53 +01:00
Julian Kent af8d178ae5 Fix spurious RTL triggers 
Two sources:
1. global to local conversion was sometimes giving issues, so do everything in global
2. on startup the RTL didn't check if the home position was valid before processing it
 2021-01-18 16:26:53 +01:00
Julian Kent b5f0a7ea03 Fix RangeRTL test 2021-01-18 16:26:53 +01:00
Julian Kent 5500a84b6a Add timestamp to RTL message 2021-01-18 16:26:53 +01:00
Julian Kent f169247bc2 Add RTL topics to ulog default profile 2021-01-18 16:26:53 +01:00
Julian Kent 67082ccb2b Test the vehicle type parameter usage 2021-01-18 16:26:53 +01:00
Julian Kent 100c64c790 Test the navigator side, and fix another trig edge case 2021-01-18 16:26:53 +01:00
Julian Kent a736ba2435 Minor tweak in wind handling 2021-01-18 16:26:53 +01:00
Julian Kent e847ef1a4d Add trig tests for wind calculations, and fix bugs / edge cases 2021-01-18 16:26:53 +01:00
Julian Kent 7482413005 Add Range-based RTL 2021-01-18 16:26:53 +01:00
Ricardo Marques e817fb83f5 pwm_extra: Add PWM_EXTRA parameters. 
Signed-off-by: Ricardo Marques <marques.ricardo17@gmail.com>
 2021-01-18 15:43:28 +01:00
Matthias Grob 02c0f08060 flashfs: fix alignment ambiguity 
Instead of ignoring the warnings.
Thanks to @Ole2mail and @yuhaim for the suggestions.
 2021-01-18 14:19:29 +01:00
Daniel Agar dab90f86a4 drivers/gps: limit to ublox only flash constrained targets 2021-01-18 09:30:01 +01:00
Ricardo Marques 78c05275d2 tailsitter: Fix differential thrust in FW mode. 
Signed-off-by: Ricardo Marques <marques.ricardo17@gmail.com>
 2021-01-18 09:04:27 +01:00
Daniel Agar 3abe2e82d1 mpu9250: create dedicated i2c version and delete legacy driver 
- update crazyflie and bbblue usage
 - eventually this should be merged with the SPI version after interface
changes are made
 2021-01-17 16:11:19 -05:00
David Jablonski 2ed48f041c mavlink: Templated SCALED_IMU mavlink stream 2021-01-17 12:32:51 -05:00
Matthias Grob 031bbb7f3e FlightModeManager: handle commands all the time 
Moving the command handling to a separate function that gets called
whenever a vehicle command is available to always react on commands
and not just when already a task is running.

This solves e.g. commanding an Orbit when in Staibilized.
 2021-01-17 15:46:30 +01:00
Matthias Grob df54f938ef FlightModeManager: correct setpoint struct initialization 
It is important that setpoints get initialized with NAN and not overwritten
if specifically set by a successful flight task execution. It's then
clear if any setpoints were intentionally and successfully set.
Crucial for the position controller's emergency failsafe and the
seamless setpoint handover to the next flight task.
 2021-01-17 15:46:30 +01:00
Matthias Grob 63db61a700 FlightModeManager: correct acceleration setpoint feedback naming 
The variable was never renamed correctly in this in between layer when
we switched from normalized thrust to acceleration setpoints.
 2021-01-17 15:46:30 +01:00
Daniel Agar 4d7b875ee2 flight_mode_manager: merge with flight_tasks 2021-01-17 15:46:30 +01:00
bresch eaa2ae9dc9 ekf2: add param to enable synthetic mag Z fusion mode 2021-01-17 12:06:59 +01:00
bresch 983234e29d ekf2: add param to set rng check hysteresis 2021-01-17 12:06:59 +01:00
Silvan Fuhrer 195a900ecf change default of RTL_LAND_DELAY to 0 
Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
 2021-01-17 12:05:30 +01:00
JacobCrabill 8e8497ff77 heater: px4io: Add support for heaters on IO MCU 2021-01-17 12:03:53 +01:00
Silvan Fuhrer cee4016665 Preflight checks: Airspeed checks update 
-check for valid airspeed_validated (declared valid plus updated less than 1s ago)
-added param (COM_ARM_ARSP_EN) to enable/disable check for max airspeed for arming set max
airspeed limit to half of stall airspeed

Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
 2021-01-16 10:26:55 -05:00
Beat Küng ade3871bee adc: add support for multiple sensor voltage channels 2021-01-15 10:57:20 -05:00
Beat Küng e2337a34eb system_power: add comp_5v_valid and can1_gps1_5v_valid 
And fill it in from the v5x GPIO expander.
 2021-01-15 10:57:20 -05:00
Beat Küng 704a82aaa6 gpio: extend support for /dev/gp* GPIO's 
Note that there's a small CLI interface change.
 2021-01-15 10:57:20 -05:00
Beat Küng 3e4b8763a5 nuttx: add mcp23009 gpio driver 2021-01-15 10:57:20 -05:00
Matej Frančeškin ba6a8080ea mavlink: don't respond to MAV_CMD_REQUEST_MESSAGE if component doesn't match 
PX4 is responding with NACK to MAV_CMD_REQUEST_MESSAGE from a GCS to
payload-manager which confuses a GCS.
PX4 shouldn't respond to commands that are not broadcasted or specificaly
addressed to it.
 2021-01-15 10:57:20 -05:00
Lorenz Meier a282f3df8d CLI test: Disable by default on NuttX 
First target is to enable this for POSIX tests and then later to roll them out to NuttX.
 2021-01-15 10:57:20 -05:00
Lorenz Meier 03e9e10847 Add CLI tests for basic soak testing 
This is in no way a complete test suite but is intended as a starting point to get minimal
test coverage for CLI handling tests in. This is necessary to QA the CLI handling
(e.g. removal of commands) and to ensure that we are exercising these code paths in
stack check and alike tests.
 2021-01-15 10:57:20 -05:00
Julian Oes 5ae5c03c66 mavlink: handle param4/5 from mission_item_int 
It turns out that we did not properly handle param4 and param5 if they
are transferred using mission_item_int if the frame is
MAV_FRAME_MISSION.
 2021-01-15 10:57:20 -05:00
Beat Küng 12ebbd995d bmp388: wait a bit longer to schedule first cycle after reset 2021-01-15 10:57:20 -05:00
Beat Küng 529c3112ac bmp388: quiet if startup fails (no sensor on bus) 2021-01-15 10:57:20 -05:00
Thomas df41c99b61 make failsafe handling consistent over all VTOL types 2021-01-15 09:19:07 +03:00
Thomas 38e46ff341 Rename VtolAttitudeControl::abort_front_transition(const char *reason) to VtolAttitudeControl::quadchute(const char *reason) 2021-01-15 09:19:07 +03:00
Thomas StauberandMatthias Grob 40fbfdc054 Undo make format change 
Co-authored-by: Matthias Grob <maetugr@gmail.com>
 2021-01-15 09:19:07 +03:00
Thomas 83ddb77a5f delete excess empty lines 2021-01-15 09:19:07 +03:00
Thomas b90fafd5cd Fix quadchute logic so that it also works during back transition 2021-01-15 09:19:07 +03:00
Daniel Agar e96571b45d uavcannode: GPS working on cuav_can-gps-v1 
- use sensor_gps directly from sensor rather than vehicle_gps_position (aggregated value)
 2021-01-13 22:06:46 -05:00
Daniel Agar a0d8d5ac74 sensors/vehicle_gps_position: untangle and remove unnecessary state 2021-01-13 20:17:49 -05:00
Daniel Agar bc8ec5d1f5 uavcannode: support optical_flow 2021-01-13 19:35:28 -05:00
RomanBapst f05599caff tecs: use speed derivative provided by local position 
Signed-off-by: RomanBapst <bapstroman@gmail.com>
 2021-01-13 21:21:07 +03:00
RomanBapst e546584555 tecs: moved trivial getter methods to header file 
Signed-off-by: RomanBapst <bapstroman@gmail.com>
 2021-01-13 21:21:07 +03:00
Roman BapstandMathieu Bresciani 701c105ab6 Update src/lib/tecs/TECS.cpp 
Co-authored-by: Mathieu Bresciani <brescianimathieu@gmail.com>
 2021-01-13 21:21:07 +03:00
RomanBapst fa559aef43 TECS: stop learing integrator if airspeed is not available, but don't zero it 
Signed-off-by: RomanBapst <bapstroman@gmail.com>
 2021-01-13 21:21:07 +03:00
RomanBapst d4d1c0fe01 TECS: some cosmetics 
Signed-off-by: RomanBapst <bapstroman@gmail.com>
 2021-01-13 21:21:07 +03:00