fly316/PX4-Autopilot
7
0
Fork 0
mirror of https://gitee.com/mirrors_PX4/PX4-Autopilot.git synced 2026-10-25 05:03:33 +08:00
Code Issues Packages Projects Releases Wiki Activity
48,229 Commits 852 Branches 161 Tags
purge_protocol_version
Commit Graph
28662 Commits
Author SHA1 Message Date
PX4 BuildBot 723e803ab9 Update submodule public_regulated_data_types to latest Sun May 16 12:39:14 UTC 2021 
- public_regulated_data_types in PX4/Firmware (b00f416229a5bcef2bdad4ec29c90e4846c701af): https://github.com/UAVCAN/public_regulated_data_types/commit/1337b1c86fee5bd3f3c3c0f1027bcf19e5c08aae
    - public_regulated_data_types current upstream: https://github.com/UAVCAN/public_regulated_data_types/commit/0a773b93ce5c94e1d2791b180058cb9897fab7e1
    - Changes: https://github.com/UAVCAN/public_regulated_data_types/compare/1337b1c86fee5bd3f3c3c0f1027bcf19e5c08aae...0a773b93ce5c94e1d2791b180058cb9897fab7e1

    0a773b9 2021-05-10 Kalyan Sriram - reg/drone: remove redundant timestamp in Velocity3Var (#117)
 2021-05-16 17:22:40 -04:00
AlexKlimaj 4a93f7cea1 Add ARK CAN GPS Board Config 2021-05-16 13:21:44 -04:00
Beat Küng 9fbbcc9c73 mavlink ATTITUDE_TARGET: send also if vehicle_attitude_setpoint is not updated 
This is the case in MC acro
 2021-05-16 13:01:20 -04:00
Beat Küng 2a84afb6a2 mavlink: avoid 'stream xy not found' warnings on CONSTRAINED_FLASH targets 
e.g.:
WARN  [mavlink] stream ADSB_VEHICLE not found
WARN  [mavlink] stream GIMBAL_DEVICE_ATTITUDE_STATUS not found
WARN  [mavlink] stream GIMBAL_MANAGER_STATUS not found
WARN  [mavlink] stream GIMBAL_DEVICE_SET_ATTITUDE not found
WARN  [mavlink] stream GPS2_RAW not found
WARN  [mavlink] stream UTM_GLOBAL_POSITION not found
ERROR [mavlink] configure_streams_to_default() failed
 2021-05-16 13:01:20 -04:00
Jonas Vautherin 5f14ee2a97 busy -> invalid item 2021-05-13 12:22:16 +02:00
Beat Küng e77b4418a5 fix logger: use free() instead of 'delete[]' for _buffer 
The allocation got changed to px4_cache_aligned_alloc
 2021-05-11 18:12:56 +02:00
Igor Mišić 05a2d4d5a9 gps: updated submodule to fix for heading 2021-05-11 08:34:23 +02:00
Igor Mišić d9e31d67aa gps: Updated timeout time for the rover with moving base 
The MB rover will wait as long as possible to compute a navigation solution, possibly lowering the navigation rate all the way to 1 Hz while doing so.
 2021-05-11 08:34:23 +02:00
Silvan Fuhrer b7e563bdbe Airspeed selector: fix in_air_fixed_wing condition 
Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
 2021-05-10 13:43:05 +02:00
Silvan Fuhrer 596da5b7d3 Airspeed selector: use module params for FW_AIRSPD_STALL 
Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
 2021-05-10 13:43:05 +02:00
Silvan Fuhrer 2f73115b54 translate ASPD_STALL to FW_AIRSPD_STALL 
Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
 2021-05-10 13:43:05 +02:00
Silvan Fuhrer bf311ed77d addressed review comments (fixes in error message and comments) 
Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
 2021-05-10 13:43:05 +02:00
Silvan Fuhrer 63a53d48e7 FW Position controller: improve parameter sanity checks (provide more feedback) 
Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
 2021-05-10 13:43:05 +02:00
Silvan Fuhrer c8ec6b3d08 Airspeed selector: remove ASPD_STALL and replace by FW_AIRSPD_STALL 
Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
 2021-05-10 13:43:05 +02:00
RomanBapst 3ac8c23dd0 commander: added prearm check for geofence violation 
- if geofence action is not none, then don't allow arming outside of geofence

Signed-off-by: RomanBapst <bapstroman@gmail.com>
 2021-05-10 10:46:49 +03:00
RomanBapst 6215e6c7ec navigator: do not emit geofence warnings if system is not armed 
Signed-off-by: RomanBapst <bapstroman@gmail.com>
 2021-05-10 10:46:49 +03:00
Daniel Agar c49c8932de commander: mag_calibration fail immediately if no mags available 2021-05-08 13:03:42 +02:00
Peter van der Perk 0c926250a2 UAVCANv1 cleanup and uORB over UAVCANV1 move to own subclass 2021-05-08 13:03:02 +02:00
Daniel Agar f15eefcc95 ekf2: selector increase status rate before potential instance change 2021-05-07 22:38:47 -04:00
Julian Oes 29730e30fa ekf2: don't timeout in HITL mode 
Otherwise ekf2 might not start if HITL isn't started within 30 seconds.
 2021-05-07 22:38:03 -04:00
Julian Oes ac97b5520c commander: assume power is fine for HITL 
This means that the preflight check indicator in QGC is green for HITL.
 2021-05-07 22:38:03 -04:00
Julian Oes 648a21f11d commander: ignore calibration in HITL 
The calibration is not found in HITL mode. Therefore, I suggest to
ignore this step and assume the calibration is fine.

This mostly fixes the preflight check indicator in QGC, arming was (for
some reason?) already possible.
 2021-05-07 22:38:03 -04:00
Hamish Willee d3fd03a014 airspeed calibration: instruct to blow into front of pitot 
... rather than across it
 2021-05-07 21:34:53 -04:00
PX4 BuildBot e265ebabc5 Update submodule ecl to latest Thu May 6 12:39:12 UTC 2021 
- ecl in PX4/Firmware (a300d32523e24df3f366a0d564b764261e1c1909): https://github.com/PX4/PX4-ECL/commit/a7b8afe420f438554ad90bcba0f1f4872325e75b
    - ecl current upstream: https://github.com/PX4/PX4-ECL/commit/29243ac5cbb5d27ac71744e88afcd786df6f748d
    - Changes: https://github.com/PX4/PX4-ECL/compare/a7b8afe420f438554ad90bcba0f1f4872325e75b...29243ac5cbb5d27ac71744e88afcd786df6f748d

    29243ac 2021-05-05 bresch - yaw_reset: reduce minimum vector length to compute yaw error
aad4840 2021-05-02 Kabir Mohammed - EKF: increase allowed difference between flow and gyro ODRs
 2021-05-06 13:53:40 -04:00
Silvan Fuhrer 08dab18a8b vtol_type: in FW, set min PWM to PWM_DEFAULT_MIN instead of PWM_MOTOR_OFF 
Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
 2021-05-06 10:20:24 +02:00
benjinne 099c2d13f6 dshot: add 3D capability 2021-05-06 08:12:07 +02:00
Daniel Agar 177ee4cbca drivers/optical_flow/paw3902: properly discard samples after mode change 
- respect mode 2 shutter requirements from datasheet (should not operate with Shutter < 0x01F4 in Mode 2)
 - sensor reset is handled by mode change
 2021-05-05 21:48:01 -04:00
Daniel Agar b1ebd16c61 ekf2: improve selector reset handling 
- handle reset count rollover (uint8_t)
 - compute full reset delta if primary estimator instance has changed or if we missed a reset
 2021-05-05 21:45:13 -04:00
Alessandro Simovic d1d5eba320 follow-me: log follow_target msg 2021-05-05 16:13:50 -04:00
Alessandro Simovic 48f3bd4078 follow-me: formatting 2021-05-05 16:13:50 -04:00
Alessandro Simovic 5f19eeaaa5 follow_target: copy also velocity fields from uorb 2021-05-05 16:13:50 -04:00
Alessandro Simovic 2d6bc9b6e0 follow_target: use actual velocity measurement 2021-05-05 16:13:50 -04:00
Alessandro Simovic 5d9b3504f7 follow-target: correctly set "updated" flag 2021-05-05 16:13:50 -04:00
Alessandro Simovic f1fca0939f follow-target: name variable correctly 2021-05-05 16:13:50 -04:00
David Sidrane 3702140e24 PWMOut:Arm once all channels are initalized. 2021-05-05 20:48:06 +02:00
David Sidrane 3d166d3279 PWM:Add Channel mask to up_pwm_servo_arm & up_pwm_servo_deinit 2021-05-05 20:48:06 +02:00
David Sidrane dd4ffb3c0c PWMOut:Fix pwm status 2021-05-05 20:48:06 +02:00
David Sidrane 44cdc52ef8 PWMOut:Use rates from single instance & init all instances channels 2021-05-05 20:48:06 +02:00
Jukka Laitinen ac6e7a1c6c FlightTaskManualAltitude: Fix double->float conversion in initialization 
This gives an error on some new compilers, e.g. riscv64-unknown-elf 10.2.0

Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>
 2021-05-05 09:31:07 +02:00
Jukka Laitinen 532f370e7d Fix implicit float to double conversions 
The both results of ?: should be of same type, and some compilers give error
on this:
	" implicit conversion from 'float' to 'double' to match other result of conditional"

Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>
 2021-05-05 09:31:07 +02:00
Daniel Agar 3ec40a5956 collision_prevention: fix CP_GO_NO_DATA parameter type 2021-05-04 16:41:32 -04:00
Matthias Grob ee87257a8d FlightModeManager: move velocity control feedback into FlightTask 
This was only handled outside because FlightTaks lived in the
multicopter position controller which produces the data that was
needed but now it doesn't make sense anymore to handle this
subscription separately.

It's better to have it inside the base task to have the data available
on task activation sucht that e.g. Altitude mode can take over smoothly
from Position mode.
 2021-05-04 16:47:48 +02:00
Matthias Grob c28533677d MulticopterLandDetector: use setpoint generation to infer decend intent 
For any normal use case where a downwards velocity setpoint is set
this works exactly the same as before.
E.g. autonomous landing, landing in Altitude or Position mode

The advantage is that the very common case where a vehicle tries
to hold a constant altitude but fails to do so e.g. during a hard brake
with too much lift the resulting downwards velocity was interpreted
as descend intent and since the vehicle already struggled to hold altitude
with low thrust and was not moving fast anymore because it was braking
this lead to a lot more false positives on certain vehicle types.

The disadvantage is that not setting a downwards velocity setpoint but
just moving the position setpoint into the ground does not result in
land detection anymore. We do not use this method of landing anymore for
quite a while. It's not recommended and I wonder if there's some rare use
case like offboard where this is done.

We could add an additional case for the specific case to land with a
position setpoint only.
 2021-05-04 16:43:33 +02:00
Matthias Grob 2e292abfff MulticopterLandDetector: Make land detection time configurable 
The tree stages used arbitrary 350, 250 300ms totally 900ms
So this changes it to each stage to a third of the parameter.
Default it is 1 second -> 333ms per stage.
 2021-05-04 16:43:33 +02:00
RomanBapst 269ce07cb5 land detector: log more states in order to facilitate debugging ground contact state 
Signed-off-by: RomanBapst <bapstroman@gmail.com>
 2021-05-04 16:43:33 +02:00
Jari NippulaandNuno Marques 04b7ee43bc protocol_splitter: Sp2Header defined as union (#17511) 
Aligned with agent_protocol_splitter to make byte access easier
for checksum generation

Co-authored-by: Nuno Marques <n.marques21@hotmail.com>
 2021-05-04 10:09:24 +02:00
RomanBapst cd4378b8c6 vtol: init boolean consistently 
Signed-off-by: RomanBapst <bapstroman@gmail.com>
 2021-05-03 18:58:26 -04:00
Thomas ab10e68a40 update Quadchute trigger from mavlink PR 1569 2021-05-03 21:44:27 +03:00
Thomas bf9758247b add VEHICLE_VTOL_STATE_QC and remove hardcoding 2021-05-03 21:44:27 +03:00
Thomas d3ddbe8db5 Allow quadchute from external command 2021-05-03 21:44:27 +03:00