543454f12e
stm32h7:ADC STM32_RCC_D3CCIPR_ADCSEL->STM32_RCC_D3CCIPR_ADCSRC
2024-01-30 18:07:57 -05:00
563fd8427a
boards: increase init stack size by 100B
...
Signed-off-by: Silvan Fuhrer <silvan@auterion.com >
2023-10-02 09:37:06 +02:00
c1dbe177b8
boards: move FRAM emulated sector size to the 32-byte granularity ( #21204 )
2023-09-20 16:50:36 -04:00
3d61ab84c4
Cannode add ability to get node ID after boot. Fix ARK CAN OPT_WAIT_FOR_GETNODEINFO_JUMPER_GPIO_INVERT
2023-08-30 11:40:01 -04:00
c95539e8ce
boards: increase init stack size by 150B
...
External airframes need a bit more stack due to nested configs.
2023-06-09 21:11:11 -04:00
9e5420bbbd
microdds_client: rename to uxrce_dds_client
...
| | old version | new version (second proposal) |
|-|-|-|
| module name | `microdds_client` | **`uxrce_dds_client`** |
| strings / comments about the module | non consistent | **UXRCE-DDS Client** |
| menuconfig option | `MODULES_MICRODDS_CLIENT` | **`MODULES_UXRCE_DDS_CLIENT`** |
| module parameters group name | `Micro XRCE-DDS` | **UXRCE-DDS Client** |
| module parameters name prefix | `XRCE_DDS_` | `UXRCE_DDS_` |
| module class name | `MicroddsClient` | **`UxrceddsClient`** |
|`init.d/rcS` whenever the module is mentioned | `microdds` | **`uxrce_dds`** |
| main doc page name | XRCE-DDS (PX4-FastDDS Bridge) | **uXRCE-DDS (PX4-micro XRCE-DDS Bridge)**|
| environment variable to have custom namespace in simulation | PX4_MICRODDS_NS | **PX4_UXRCE_DDS_NS** |
Signed-off-by: Beniamino Pozzan <beniamino.pozzan@phd.unipd.it >
2023-05-03 11:51:53 -07:00
82fd2987c9
fw pos control: revert name until we delineate this module a bit more ( #21442 )
2023-04-13 17:00:04 +02:00
6ec2b902cc
ROMFS: only copy bootloader binary if systemcmds/bl_update included
2023-03-16 09:43:56 -04:00
ea97a38b2b
Initial Cannode PWM Support ( #19748 )
...
* Add uavcannode esc/servo pwm control pipeline
* Remove cannode rc.interface with mixer purge
* Cannode add Kconfig options to reduce flash usage
2023-03-15 11:20:07 -04:00
3e200bca0d
fw_pos_control_l1: renaming to fw_path_navigation, l1 control is not used anymore, use a more generic naming.
2023-02-09 17:51:55 +01:00
3822ef1519
boards: update all in tree bootloaders
2023-01-19 17:25:39 -05:00
45912066d2
fix copyright header year range
2023-01-14 09:16:16 -05:00
635daeed8a
NuttX push jlink-nuttx into cmake and enable CONFIG_DEBUG_TCBINFO by default
2023-01-12 09:05:26 -05:00
e6c4416250
update all px4board kconfig
2023-01-07 21:53:01 -05:00
dc5ce9b0ce
boards: NuttX increase default CONFIG_ARCH_INTERRUPTSTACK 512->768 bytes
...
- during casual testing on default configs the stack was penetration was reaching ~90% which is a bit too close for comfort
- increasing by 50% to be conservative
2023-01-07 12:07:35 -05:00
21e88f64b4
Add new fixed wing rate control module (fw_rate_control)
...
* Fixedwing rate control into a separate module
* Start fw_rate_control for vtol
* Move over airspeed related parameters to fw_rate_control
Co-authored-by: Silvan Fuhrer <silvan@auterion.com >
2023-01-04 11:14:00 -05:00
0fbb6db6d4
boards: update all NuttX defconfig (make all_olddefconfig)
2022-12-29 12:50:37 -05:00
c2f15f5957
boards: update all px4boards (make all_px4_savedefconfig)
2022-12-29 12:50:37 -05:00
f2cd7667dc
systemcmds/bsondump: new command line utility (extracted from parameters)
2022-12-21 10:14:00 -05:00
41fa53605c
boards: rebuild STM32H7 bootloaders and px4-io-v2
2022-12-09 11:02:21 -05:00
9faa8e23e8
NuttX Upgrade CONFIG_LIB_BOARDCTL->CONFIG_BOARDCTL
2022-11-22 14:30:08 -05:00
2cb4ef0629
NuttX 10.3+ upgrade ( #20190 )
...
Co-authored-by: Peter van der Perk <peter.vanderperk@nxp.com >
Co-authored-by: David Sidrane <David.Sidrane@NscDg.com >
Co-authored-by: alexklimaj <alex@arkelectron.com >
2022-11-20 20:28:07 -05:00
8f25acd428
sih remove gps and use standalone sensor_gps_sim
2022-09-09 18:00:50 -04:00
bfe0d71a21
sih remove baro and use standalone sensor_baro_sim
2022-09-09 18:00:50 -04:00
c5336abba2
sih remove mag and use standalone sensor_mag_sim
2022-09-09 18:00:50 -04:00
15fece7e14
delete SYS_CTRL_ALLOC
2022-09-09 09:14:09 -04:00
bcdd2203d3
delete systemcmds/motor_test and msg/test_motor.msg
2022-09-09 09:14:09 -04:00
d3312f955f
delete systemcmds/pwm
2022-09-09 09:14:09 -04:00
5dd1e5a018
delete systemcmds/mixer
2022-09-09 09:14:09 -04:00
4040e4cdf2
simulation organization and cleanup
...
- new modules/simulation directory to collect all simulators and related modules
- new Tools/simulation directory to collect and organize scattered simulation submodules, scripts, etc
- simulation module renamed to simulator_mavlink
- sih renamed to simulator_sih (not a great name, but I wanted to be clear it was a simulator)
- ignition_simulator renamed to simulator_ignition_bridge
- large sitl_target.cmake split by simulation option and in some cases pushed to appropriate modules
- sitl targets broken down to what's actually available (eg jmavsim only has 1 model and 1 world)
- new Gazebo consistently referred to as Ignition for now (probably the least confusing thing until we fully drop Gazebo classic support someday)
2022-08-25 09:10:03 -04:00
f929017618
boards: link missing arch_io_pins lib
2022-07-31 11:19:20 -04:00
cfa8b451c7
cuav-nora: changed brick to compatible with cuav noraplus
2022-06-24 10:03:43 -05:00
32544452f0
drivers: Sagetech MXS transponder support
...
Co-authored-by: Megan McCormick <megan.mccormick@sagetech.com >
Co-authored-by: Chuck Faber <chuck.faber@sagetech.com >
2022-06-20 18:16:07 -04:00
4cc3e78558
Add mag bias estimator to CAN GPS units with IMUs
...
- run `sensors` hub to process sensor_mag and publish vehicle_magnetometer
- update uavcannode to use vehicle_magnetometer
2022-06-19 15:46:36 -04:00
5b6e5a0968
boards: NuttX update all boards to preallocated sem holder list
...
- CONFIG_SEM_PREALLOCHOLDERS=32
- CONFIG_SEM_NNESTPRIO=16 (default)
2022-05-31 01:41:07 -07:00
132a07f53c
boards: test boards add NuttX ostest and run on Jenkins test rack
2022-05-29 13:41:16 -04:00
479b52fd02
Update all H7 Bootloders
2022-05-27 14:25:25 -04:00
fd81951391
boards: STM32H7 pad to 256 bit - 32 bytes ( #19724 )
2022-05-27 14:04:51 -04:00
adc6472480
cuav/x7pro/test.px4board: disable module to reduce flash
2022-05-10 08:57:39 +02:00
7bb789cb23
boards: update bootloaders to latest
2022-04-25 22:39:25 -04:00
490a0c473b
Rename vmount to gimbal
2022-02-07 19:21:15 -05:00
700c13cdff
Remove linking of arch_io_pins into drivers_board
...
This goes the other way around; arch_io_pins is using the pin
definitions from drivers_board, so the drivers_board needs to be linked
into arch_io_pins
Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae >
2022-01-27 12:42:40 -05:00
df44df2df6
delete systemcmds/esc_calib
...
- this is redundant with commander esc_calibration
2022-01-10 09:51:11 -05:00
6d0339ba0c
I2CSPIDriverBase: sensor start failure ERROR if internal, WARN if external
2021-12-28 11:05:35 -05:00
9686c81f7d
boards: enable flow control on CDCACM
...
This enables flow control on CDCACM for the NuttX boards which fixes a
problem where HITL would stall.
The stall could happen if the hardware would be a bit too slow in
keeping up with the incoming messages. Often, this happened on arming
because the logger would take some time to log all parameters right at
the beginning.
The stall would then not recover due to NuttX bug where the rx interrupt
would not be restored correctly and instead only a slower watchdog would
release the next read. This watchdog takes 200ms which means it's hard
to impossible to get out of the situation without restarting sim and/or
PX4. For more information about the issue, see:
apache/incubator-nuttx#3633
As a workaround, until that bug is fixed, and because it makes sense
anyway, I propose to enable FLOWCONTROL for the serial via USB.
2021-12-21 08:01:38 +01:00
8185e2a384
boards: board_app_initialize() don't return early on failure
...
- depending on the situation we're more likely to get actionable user
feedback by allowing boot to complete rather than silently failing
2021-12-09 20:41:54 -05:00
3160e7a3cd
Jenkins: run calib_udelay on test rack
2021-12-05 19:42:10 -05:00
a2064cceff
boards: enable early MPU reset on any board potentially not using the PX4 bootloader
2021-12-01 20:13:41 -05:00
8172a561ca
cuav_x7pro nsh:Remove CONFIG_RAMTRON_WRITEWAIT
2021-11-26 19:27:29 -05:00
947162f998
cuav_nora nsh:Remove CONFIG_RAMTRON_WRITEWAIT
2021-11-26 19:27:29 -05:00
David Sidrane