Beat Küng
673de86553
cubepilot/cubeorange: disable system_time and motor_ramp to reduce flash
2021-09-11 14:08:41 -04:00
Beat Küng
c5c80e31b6
boards: remove DIRECT_INPUT_TIMER_CHANNELS from board_config.h
2021-09-08 16:10:24 -04:00
Beat Küng
a8e75d174c
boards: remove BOARD_HAS_PWM and use DIRECT_PWM_OUTPUT_CHANNELS
2021-09-08 16:10:24 -04:00
Daniel Agar
5eddf32cd3
boards: cubepilot_cubeorange only start ADSB mavlink if console not present
...
- cubepilot_cubeorange_test has the console enabled (used for test rack and bench debugging)
2021-09-06 11:52:58 -04:00
Sander Swart
dbb0974b0c
Removed TEL3 from cube orange default.cmake as it is used for the built in ADS-B receiver
2021-09-06 09:51:38 +02:00
Sander Swart
bce1c06174
Added new line at the end of the file as per code style
2021-09-06 09:51:38 +02:00
Sander Swart
223410e17a
Enable Cube Orange built in ADS-B receiver by default
2021-09-06 09:51:38 +02:00
Daniel Agar
476e050000
boards: cubepilot_cubeorange_test disable unused modules to save flash
2021-09-05 23:18:28 -04:00
Daniel Agar
40e5477edb
NuttX boards fix mkfatfs and rcS logic
2021-09-01 15:16:00 -04:00
Daniel Agar
9e0fa8e82b
boards: set SENS_TEMP_ID defaults
2021-09-01 15:16:00 -04:00
Daniel Agar
a819a7b7c4
boards: cube orange fully clear any existing MPU configuration as soon as possible
2021-09-01 08:53:05 +02:00
Daniel Agar
ab1c90d831
boards: cubeorange/cubeyellow use amber LED for armed state
2021-08-28 09:15:41 -04:00
Daniel Agar
f59b54abd7
boards: io-v2 increase idle thread stack 280 -> 316 bytes
2021-08-25 21:32:05 +02:00
David Sidrane
bb913ae11a
system_load:Track Dynamic PID hash
2021-08-13 14:22:00 -04:00
David Sidrane
64bf02384f
cubepilot_cubeyellow: Update nsh defconfig NuttX 10.1.0+
2021-08-13 14:22:00 -04:00
David Sidrane
281a238bb0
cubepilot_cubeyellow: Update test defconfig NuttX 10.1.0+
2021-08-13 14:22:00 -04:00
David Sidrane
9c1752bf4d
cubepilot_io-v2: Update nsh defconfig NuttX 10.1.0+
2021-08-13 14:22:00 -04:00
David Sidrane
d9da05bd02
cubepilot_cubeorange: Update bootloader defconfig NuttX 10.1.0+
2021-08-13 14:22:00 -04:00
David Sidrane
2a4b4824e5
cubepilot_cubeorange: Update nsh defconfig NuttX 10.1.0+
2021-08-13 14:22:00 -04:00
David Sidrane
f5b22d8832
cubepilot_cubeorange: Update test defconfig NuttX 10.1.0+
2021-08-13 14:22:00 -04:00
David Sidrane
ec61512cdf
NuttX inits null console
2021-08-13 14:22:00 -04:00
Beat Küng
0e1f3a2d62
px4_add_board: infer VENDOR, MODEL & LABEL from cmake file name
2021-08-03 10:36:25 +02:00
Daniel Agar
774ad80ba0
systemcmds/tests: split out microbenchmarks and remove obsolete tests
...
- reorganize Jenkins HIL tests
2021-07-18 18:02:33 -04:00
Daniel Agar
c5b1fe86ca
delete deprecated BAT_* parameters
2021-07-08 22:19:12 -04:00
David Sidrane
05bdef867d
Track NuttX syslog change
2021-06-16 17:07:47 +02:00
echoG
6bc09138c1
Adding BatMon smart battery as a module and refactoring SMBUS based SBS 1.1 spec to a library
2021-06-09 12:17:45 -04:00
Daniel Agar
5f775b508f
boards: enable CONFIG_OTG_ID_GPIO_DISABLE on all F7/H7
2021-06-01 15:19:15 -04:00
David Sidrane
32e92ba817
Revert:Pull downs - bad levels cause motor spins
2021-06-01 15:18:47 -04:00
Jukka Laitinen
071eaef884
Adjust paths to bootloader include files for boards
...
Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>
2021-05-26 12:57:37 -07:00
Daniel Agar
c3884b5bc1
fake_imu (formally fake_gyro) updates for testing gyro filtering
...
- fake_imu now publishes sine sweeps over 10 seconds
- accel is also published so that fake IMU can be selected when the only option
2021-05-17 20:26:25 -04:00
David Sidrane
4da1ec1146
cubepilot_cubeyellow: Initalize PWM as input with Pull Downs
2021-05-05 20:48:06 +02:00
David Sidrane
1a5741f984
cubepilot_cubeorange: Initalize PWM as input with Pull Downs
2021-05-05 20:48:06 +02:00
Daniel Agar
58b40fbbb9
boards: move testing to dedicated test variants
2021-04-14 09:21:31 +02:00
Alex Mikhalev
1f4960d480
boards: cubeorange enable pwm_input
...
Signed-off-by: Alex Mikhalev <alex@corvus-robotics.com>
2021-04-07 21:34:44 -04:00
Daniel Agar
ad934b4911
icm20948 i2c passthrough driver for ak09916 magnetometer (Here+ GPS/compass)
...
- include icm20948 on most boards by default
- create more test variants for default boards near flash limit (cuav_nora_test, cuav_x7pro_test, holybro_durandal-v1_test)
2021-04-04 21:18:16 -04:00
Daniel Agar
43da43ddc6
boards: cubepilot cubeorange Add remaining SRAM4 & DTCM to heap
2021-04-03 14:13:23 -04:00
Daniel Agar
6874e9fba0
boards: NuttX disable all NSH memory debug commands (mb, mh, mw) by default
...
- closes https://github.com/PX4/PX4-Autopilot/issues/17062
2021-03-30 09:23:43 -04:00
Daniel Agar
631d1647d3
boards: minimize unnecessary differences in default variants
2021-03-28 14:46:47 -04:00
Daniel Agar
e77bffe582
boards: STM32H7 remove CONFIG_MM_REGIONS=3
2021-03-26 17:40:44 -04:00
David Sidrane
cdcff35760
cubepilot cubeorange:Enable ADC3 in support of temperature sensing
2021-03-19 15:48:47 +01:00
David Sidrane
7bc2393936
cubepilot cubeorange:Enable ADC3 in support of temperature sensing
2021-03-19 15:48:47 +01:00
Daniel Agar
be58db1ec9
boards: cubepilot_cubeorange_console add gyro_fft
2021-03-16 00:49:45 -04:00
Daniel Agar
4b99bd2077
boards: remove optional external ADIS IMUs to save flash
2021-03-15 13:37:24 -04:00
Daniel Agar
2257c3767e
simple gyro auto calibration module
2021-03-15 09:46:47 +01:00
Daniel Agar
f8eaa6e46b
ROMFS handle bl_update generically
...
- include all available legacy bootloaders
2021-03-11 00:38:18 +01:00
Daniel Agar
4d288512b5
add board architecture specific init defaults
2021-03-09 19:59:41 +01:00
Daniel Agar
a0b9b44ff6
boards: stm32h7 set CONFIG_SDMMC1 consistently
2021-03-09 09:37:05 -05:00
Daniel Agar
19de1e57e3
gyro_fft promote to modules and include on all boards
2021-03-05 10:56:54 -05:00
Beat Küng
7e33d03470
drivers: remove tap_esc
...
- it's not used anymore
- it would need a refactoring to use mixer_module
2021-02-25 09:28:37 -05:00
Daniel Agar
414f9f81d9
move fake GPS to standalone module
2021-02-20 14:13:36 -05:00
