6ec9ab11f2
add fw auto-tune module to board configs
2021-10-25 13:41:31 +02:00
21163d859e
Whitespace cleanup.
2021-10-19 13:29:26 -04:00
faf481df31
modalai/fc-v2: remove unused DIRECT_PWM_CAPTURE_CHANNELS define
2021-10-18 18:45:19 -04:00
05d71c8118
Kconfig fix CI issues after rebase
2021-10-07 10:09:01 -04:00
ed5fee1a72
Backport #18311 mc atune
2021-10-07 10:09:01 -04:00
454c907b7d
Kconfig backport #18327 mag_bias
2021-10-07 10:09:01 -04:00
36191e649a
Kconfig backport #18289 and other flash size fixes
2021-10-07 10:09:01 -04:00
60790f7112
Backport boards: modalai_fc-v1 update default.cmake ( #18202 )
2021-10-07 10:09:01 -04:00
33fd65e5fe
[Kconfig] Fix regressions found by bloaty and cleanup unused cmake
2021-10-07 10:09:01 -04:00
892d673b45
[Kconfig] fix flash overflow test builds
2021-10-07 10:09:01 -04:00
efc91d2b69
[Kconfig] Fixed inclusion of microbench bydefault when TESTING was enabled
...
Added full optimization option
2021-10-07 10:09:01 -04:00
b3e799e277
[Kconfig] Add all distance sensors
2021-10-07 10:09:01 -04:00
21e6547ac7
[Kconfig] Toolchain & platform fixes, SITL still broken
2021-10-07 10:09:01 -04:00
6af0477733
[Kconfig] Gnerate px4board from old cmake
...
Added make updateconfig to update all config when default's have changed
Added cmake to px4board conversion script
2021-10-07 10:09:01 -04:00
bbfaa4694c
boards: cleanup serial RX DMA hrt_call_every
...
- remove ts_to_abstime dependency
2021-10-06 14:39:59 -04:00
51758bd7e6
boards: delete unused variants
2021-10-05 23:14:04 -04:00
c271a9e3e6
add sd_stress to all boards and run on test rack
2021-10-04 17:38:31 -04:00
397b1ed8d6
Add sd_stress command
2021-10-04 17:38:31 -04:00
6d78054f50
mavlink USB auto start/stop on boards with VBUS
...
- no longer start sercon or mavlink usb by default
- on USB connection (VBUS) monitor serial USB at low rate and start Mavlink if there's a HEARTBEAT or nshterm on 3 consecutive carriage returns
- the mavlink USB instance is automatically stopped and serdis executed if USB is disconnected
- skipping Mavlink USB (and sercon) saves a considerable amount of memory on older boards
2021-10-03 15:32:54 -04:00
1443f773da
mbe: add module to targets
2021-10-02 21:25:21 -04:00
5874b1f87c
mc atune: add module to all targets
...
- adjust flash constrianed targets to fit
2021-10-02 18:12:05 -04:00
a238965228
boards: modalai_fc-v1 update default.cmake ( #18202 )
...
- makes TELEM/SERIAL-4 (VOXL-Flight J1009) work
2021-09-09 09:03:21 -04:00
c5c80e31b6
boards: remove DIRECT_INPUT_TIMER_CHANNELS from board_config.h
2021-09-08 16:10:24 -04:00
a8e75d174c
boards: remove BOARD_HAS_PWM and use DIRECT_PWM_OUTPUT_CHANNELS
2021-09-08 16:10:24 -04:00
40e5477edb
NuttX boards fix mkfatfs and rcS logic
2021-09-01 15:16:00 -04:00
bb913ae11a
system_load:Track Dynamic PID hash
2021-08-13 14:22:00 -04:00
8cdea33074
modalai_fc-v2: Update bootloader defconfig NuttX 10.1.0+
2021-08-13 14:22:00 -04:00
02ef9dc188
modalai_fc-v2: Update nsh defconfig NuttX 10.1.0+
2021-08-13 14:22:00 -04:00
5beda51fa4
modalai_fc-v1: Update nsh defconfig NuttX 10.1.0+
2021-08-13 14:22:00 -04:00
ec61512cdf
NuttX inits null console
2021-08-13 14:22:00 -04:00
0e1f3a2d62
px4_add_board: infer VENDOR, MODEL & LABEL from cmake file name
2021-08-03 10:36:25 +02:00
774ad80ba0
systemcmds/tests: split out microbenchmarks and remove obsolete tests
...
- reorganize Jenkins HIL tests
2021-07-18 18:02:33 -04:00
05bdef867d
Track NuttX syslog change
2021-06-16 17:07:47 +02:00
62fd132047
boards:Use inttypes
...
nxp_ucans32k146:Fix constant
spracing_h7extreme:Use inttypes
2021-06-16 17:07:47 +02:00
6bc09138c1
Adding BatMon smart battery as a module and refactoring SMBUS based SBS 1.1 spec to a library
2021-06-09 12:17:45 -04:00
861e15be4c
- update CDCAM_PRODUCTID to match bootloader
2021-06-03 21:38:53 -04:00
5f775b508f
boards: enable CONFIG_OTG_ID_GPIO_DISABLE on all F7/H7
2021-06-01 15:19:15 -04:00
32e92ba817
Revert:Pull downs - bad levels cause motor spins
2021-06-01 15:18:47 -04:00
51f738e54c
boards: bootloader.cmake trivial whitespace cleanup
2021-05-28 23:56:20 -04:00
e25cfaaa2f
boards: Add ModalAI Flight Core v2 initial support
2021-05-28 22:26:40 -04:00
c3884b5bc1
fake_imu (formally fake_gyro) updates for testing gyro filtering
...
- fake_imu now publishes sine sweeps over 10 seconds
- accel is also published so that fake IMU can be selected when the only option
2021-05-17 20:26:25 -04:00
1f61dcfb06
modalai_fc-v1: Disable OTG_ID_GPIO
2021-05-05 20:48:06 +02:00
310d166899
modalai_fc-v1: Initalize PWM as input with Pull Downs
2021-05-05 20:48:06 +02:00
58b40fbbb9
boards: move testing to dedicated test variants
2021-04-14 09:21:31 +02:00
a07bccc046
boards: modalai simplify defaults with new parameter defaults mechanism (AUTOCNF replacement)
2021-04-12 21:27:53 -04:00
9b7eae4043
rc: enable crsf and ghst telemetry on supported boards
...
Co-authored-by: Benjamin Linne <benjamin.linne.civ@mail.mil >
2021-04-07 08:51:49 +02:00
3261118538
boards: modalai-fc-v1 add rtps.cmake
2021-04-05 17:01:35 -04:00
ad934b4911
icm20948 i2c passthrough driver for ak09916 magnetometer (Here+ GPS/compass)
...
- include icm20948 on most boards by default
- create more test variants for default boards near flash limit (cuav_nora_test, cuav_x7pro_test, holybro_durandal-v1_test)
2021-04-04 21:18:16 -04:00
6874e9fba0
boards: NuttX disable all NSH memory debug commands (mb, mh, mw) by default
...
- closes https://github.com/PX4/PX4-Autopilot/issues/17062
2021-03-30 09:23:43 -04:00
631d1647d3
boards: minimize unnecessary differences in default variants
2021-03-28 14:46:47 -04:00
bresch