fly316/PX4-Autopilot
7
0
Fork 0
mirror of https://gitee.com/mirrors_PX4/PX4-Autopilot.git synced 2026-11-09 20:11:36 +08:00
Code Issues Packages Projects Releases Wiki Activity
40,170 Commits 852 Branches 161 Tags
dev/socketcan-nuttx-10.3.0
Commit Graph
164 Commits
Author SHA1 Message Date
JacobCrabill 02891125fd boards: Fix CONFIG_DISABLE_PTHREAD 
Previously, the default was 'n'.  Now, the default is based on
CONFIG_DEFAULT_SMALL, so to re-enable, it must be set to 'n' in
defconfig.
 2022-04-12 15:57:21 -07:00
JacobCrabill d6c505ad96 boards: Fix cpuload breakage from nuttx-10.3.0 
Add CONFIG_SCHED_INTSTRUMENTATION_SWITCH=y to all boards with
CONFIG_SCHED_INTSTRUMENTATION=y
 2022-04-12 15:57:21 -07:00
JacobCrabill 88100f516d boards: Changes for nuttx-10.3.0 
sed -i 's/arm_arch.h/arm_internal.h/g'
 2022-04-12 15:57:21 -07:00
JacobCrabill e37382edcb boards: Update NuttX configs for NuttX 10.3.0 
Rename USER_ENTRYPOINT -> INIT_ENTRYPOINT
Rename USERMAIN_STACKSIZE -> INIT_STACKSIZE
 2022-04-12 15:57:21 -07:00
Julian Oes 490a0c473b Rename vmount to gimbal 2022-02-07 19:21:15 -05:00
Beat Küng 92769bd2b2 dshot: remove BOARD_DSHOT_MOTOR_ASSIGNMENT & handle timer channel gaps 2022-01-21 20:41:15 -05:00
Daniel Agar d077ca15fb delete PWM_SERVO_SET, PWM_SERVO_SET_MODE, systemcmds/motor_ramp, and pwm_out test 2022-01-10 09:51:11 -05:00
Daniel Agar df44df2df6 delete systemcmds/esc_calib 
- this is redundant with commander esc_calibration
 2022-01-10 09:51:11 -05:00
Daniel Agar daa925137c boards: move default battery calibration defines to parameter defaults 2022-01-10 09:49:36 -05:00
Daniel Agar e835a7c4ea boards: enable readline history and tab completion on newer boards 2022-01-03 10:44:32 -05:00
Julian Oes 9686c81f7d boards: enable flow control on CDCACM 
This enables flow control on CDCACM for the NuttX boards which fixes a
problem where HITL would stall.

The stall could happen if the hardware would be a bit too slow in
keeping up with the incoming messages. Often, this happened on arming
because the logger would take some time to log all parameters right at
the beginning.

The stall would then not recover due to NuttX bug where the rx interrupt
would not be restored correctly and instead only a slower watchdog would
release the next read. This watchdog takes 200ms which means it's hard
to impossible to get out of the situation without restarting sim and/or
PX4.  For more information about the issue, see:
apache/incubator-nuttx#3633

As a workaround, until that bug is fixed, and because it makes sense
anyway, I propose to enable FLOWCONTROL for the serial via USB.
 2021-12-21 08:01:38 +01:00
Daniel Agar 8185e2a384 boards: board_app_initialize() don't return early on failure 
- depending on the situation we're more likely to get actionable user
feedback by allowing boot to complete rather than silently failing
 2021-12-09 20:41:54 -05:00
Daniel Agar a2064cceff boards: enable early MPU reset on any board potentially not using the PX4 bootloader 2021-12-01 20:13:41 -05:00
David Sidrane 5fd321ec43 modalai_fc-v2 nsh:Remove CONFIG_RAMTRON_WRITEWAIT 2021-11-26 19:27:29 -05:00
David Sidrane 9a9eb35ea8 modalai_fc-v1 nsh:Remove CONFIG_RAMTRON_WRITEWAIT 2021-11-26 19:27:29 -05:00
David Sidrane b1b948f4bc modalai_fc-v2:Set CONFIG_MKFATFS_BUFFER_ALIGMENT=32 2021-11-24 09:46:23 -05:00
David Sidrane 6327953fe9 modalai_fc-v1:Set CONFIG_MKFATFS_BUFFER_ALIGMENT=32 2021-11-24 09:46:23 -05:00
Beat Küng 4c03def6e9 boards: add CONTROL_ALLOCATOR + ACTUATOR_TEST 2021-11-23 12:40:22 -05:00
Daniel Agar f5d9b01f5c NuttX build in place 
- cmake NuttX build wrapper compile in place instead of copying source tree to build directory
    - slightly faster skipping necessary copying (depending on system)
    - allows debugging in place
    - easier to work directly in NuttX following official documentation
    - simplifies overall build which should make it easier to resolve any remaining NuttX dependency issues in the build system
 - the downside is switching back and forth between different builds always require rebuilding NuttX, but I think this is worth the improved developer experience
 - also no longer builds px4io and bootloader in every single build, for most users these rarely change and we're wasting a lot of build time
 2021-11-15 18:47:38 -05:00
Daniel Agar 2d816e0b3e [WIP] manual_control selector hacks 2021-11-09 16:05:25 +01:00
Daniel Agar a8c3bcca32 boards: disable CONFIG_STM32H7_SPI_DMATHRESHOLD 2021-11-08 19:20:47 -05:00
Daniel Agar bffcdd6fad boards: modalai_fc-v2 fix bootloader board type 2021-11-04 15:43:29 -04:00
bresch 6ec9ab11f2 add fw auto-tune module to board configs 2021-10-25 13:41:31 +02:00
mcsauder 21163d859e Whitespace cleanup. 2021-10-19 13:29:26 -04:00
Beat Küng faf481df31 modalai/fc-v2: remove unused DIRECT_PWM_CAPTURE_CHANNELS define 2021-10-18 18:45:19 -04:00
Peter van der Perk 05d71c8118 Kconfig fix CI issues after rebase 2021-10-07 10:09:01 -04:00
Peter van der Perk ed5fee1a72 Backport #18311 mc atune 2021-10-07 10:09:01 -04:00
Peter van der Perk 454c907b7d Kconfig backport #18327 mag_bias 2021-10-07 10:09:01 -04:00
Peter van der Perk 36191e649a Kconfig backport #18289 and other flash size fixes 2021-10-07 10:09:01 -04:00
Peter van der Perk 60790f7112 Backport boards: modalai_fc-v1 update default.cmake (#18202) 2021-10-07 10:09:01 -04:00
Peter van der Perk 33fd65e5fe [Kconfig] Fix regressions found by bloaty and cleanup unused cmake 2021-10-07 10:09:01 -04:00
Peter van der Perk 892d673b45 [Kconfig] fix flash overflow test builds 2021-10-07 10:09:01 -04:00
Peter van der Perk efc91d2b69 [Kconfig] Fixed inclusion of microbench bydefault when TESTING was enabled 
Added full optimization option
 2021-10-07 10:09:01 -04:00
Peter van der Perk b3e799e277 [Kconfig] Add all distance sensors 2021-10-07 10:09:01 -04:00
Peter van der Perk 21e6547ac7 [Kconfig] Toolchain & platform fixes, SITL still broken 2021-10-07 10:09:01 -04:00
Peter van der Perk 6af0477733 [Kconfig] Gnerate px4board from old cmake 
Added make updateconfig to update all config when default's have changed
Added cmake to px4board conversion script
 2021-10-07 10:09:01 -04:00
Daniel Agar bbfaa4694c boards: cleanup serial RX DMA hrt_call_every 
- remove ts_to_abstime dependency
 2021-10-06 14:39:59 -04:00
Daniel Agar 51758bd7e6 boards: delete unused variants 2021-10-05 23:14:04 -04:00
Daniel Agar c271a9e3e6 add sd_stress to all boards and run on test rack 2021-10-04 17:38:31 -04:00
Julian Oes 397b1ed8d6 Add sd_stress command 2021-10-04 17:38:31 -04:00
Daniel Agar 6d78054f50 mavlink USB auto start/stop on boards with VBUS 
- no longer start sercon or mavlink usb by default
 - on USB connection (VBUS) monitor serial USB at low rate and start Mavlink if there's a HEARTBEAT or nshterm on 3 consecutive carriage returns
 - the mavlink USB instance is automatically stopped and serdis executed if USB is disconnected
 - skipping Mavlink USB (and sercon) saves a considerable amount of memory on older boards
 2021-10-03 15:32:54 -04:00
bresch 1443f773da mbe: add module to targets 2021-10-02 21:25:21 -04:00
bresch 5874b1f87c mc atune: add module to all targets 
- adjust flash constrianed targets to fit
 2021-10-02 18:12:05 -04:00
m4v3r a238965228 boards: modalai_fc-v1 update default.cmake (#18202) 
- makes TELEM/SERIAL-4 (VOXL-Flight J1009) work
 2021-09-09 09:03:21 -04:00
Beat Küng c5c80e31b6 boards: remove DIRECT_INPUT_TIMER_CHANNELS from board_config.h 2021-09-08 16:10:24 -04:00
Beat Küng a8e75d174c boards: remove BOARD_HAS_PWM and use DIRECT_PWM_OUTPUT_CHANNELS 2021-09-08 16:10:24 -04:00
Daniel Agar 40e5477edb NuttX boards fix mkfatfs and rcS logic 2021-09-01 15:16:00 -04:00
David Sidrane bb913ae11a system_load:Track Dynamic PID hash 2021-08-13 14:22:00 -04:00
David Sidrane 8cdea33074 modalai_fc-v2: Update bootloader defconfig NuttX 10.1.0+ 2021-08-13 14:22:00 -04:00
David Sidrane 02ef9dc188 modalai_fc-v2: Update nsh defconfig NuttX 10.1.0+ 2021-08-13 14:22:00 -04:00