fly316/PX4-Autopilot
7
0
Fork 0
mirror of https://gitee.com/mirrors_PX4/PX4-Autopilot.git synced 2026-10-14 04:33:34 +08:00
Code Issues Packages Projects Releases Wiki Activity
48,275 Commits 852 Branches 161 Tags
copilot/fix-stack-buffer-overflow
Commit Graph
46 Commits
Author SHA1 Message Date
David Sidrane 543454f12e stm32h7:ADC STM32_RCC_D3CCIPR_ADCSEL->STM32_RCC_D3CCIPR_ADCSRC 2024-01-30 18:07:57 -05:00
Silvan Fuhrer 563fd8427a boards: increase init stack size by 100B 
Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
 2023-10-02 09:37:06 +02:00
Igor Mišić c1dbe177b8 boards: move FRAM emulated sector size to the 32-byte granularity (#21204) 2023-09-20 16:50:36 -04:00
Beat Küng c95539e8ce boards: increase init stack size by 150B 
External airframes need a bit more stack due to nested configs.
 2023-06-09 21:11:11 -04:00
Daniel Agar 635daeed8a NuttX push jlink-nuttx into cmake and enable CONFIG_DEBUG_TCBINFO by default 2023-01-12 09:05:26 -05:00
Daniel Agar dc5ce9b0ce boards: NuttX increase default CONFIG_ARCH_INTERRUPTSTACK 512->768 bytes 
- during casual testing on default configs the stack was penetration was reaching ~90% which is a bit too close for comfort
 - increasing by 50% to be conservative
 2023-01-07 12:07:35 -05:00
Daniel Agar 0fbb6db6d4 boards: update all NuttX defconfig (make all_olddefconfig) 2022-12-29 12:50:37 -05:00
David Sidrane 9faa8e23e8 NuttX Upgrade CONFIG_LIB_BOARDCTL->CONFIG_BOARDCTL 2022-11-22 14:30:08 -05:00
Daniel AgarPeter van der PerkDavid Sidranealexklimaj
 		2cb4ef0629 NuttX 10.3+ upgrade (#20190) 
Co-authored-by: Peter van der Perk <peter.vanderperk@nxp.com>
Co-authored-by: David Sidrane <David.Sidrane@NscDg.com>
Co-authored-by: alexklimaj <alex@arkelectron.com>
 2022-11-20 20:28:07 -05:00
Daniel Agar 5b6e5a0968 boards: NuttX update all boards to preallocated sem holder list 
- CONFIG_SEM_PREALLOCHOLDERS=32
 - CONFIG_SEM_NNESTPRIO=16 (default)
 2022-05-31 01:41:07 -07:00
David Sidrane fd81951391 boards: STM32H7 pad to 256 bit - 32 bytes (#19724) 2022-05-27 14:04:51 -04:00
Julian Oes 9686c81f7d boards: enable flow control on CDCACM 
This enables flow control on CDCACM for the NuttX boards which fixes a
problem where HITL would stall.

The stall could happen if the hardware would be a bit too slow in
keeping up with the incoming messages. Often, this happened on arming
because the logger would take some time to log all parameters right at
the beginning.

The stall would then not recover due to NuttX bug where the rx interrupt
would not be restored correctly and instead only a slower watchdog would
release the next read. This watchdog takes 200ms which means it's hard
to impossible to get out of the situation without restarting sim and/or
PX4.  For more information about the issue, see:
apache/incubator-nuttx#3633

As a workaround, until that bug is fixed, and because it makes sense
anyway, I propose to enable FLOWCONTROL for the serial via USB.
 2021-12-21 08:01:38 +01:00
Daniel Agar a2064cceff boards: enable early MPU reset on any board potentially not using the PX4 bootloader 2021-12-01 20:13:41 -05:00
David Sidrane 947162f998 cuav_nora nsh:Remove CONFIG_RAMTRON_WRITEWAIT 2021-11-26 19:27:29 -05:00
David Sidrane 48b617ee5e cuav_nora:Set CONFIG_MKFATFS_BUFFER_ALIGMENT=32 2021-11-24 09:46:23 -05:00
Daniel Agar f5d9b01f5c NuttX build in place 
- cmake NuttX build wrapper compile in place instead of copying source tree to build directory
    - slightly faster skipping necessary copying (depending on system)
    - allows debugging in place
    - easier to work directly in NuttX following official documentation
    - simplifies overall build which should make it easier to resolve any remaining NuttX dependency issues in the build system
 - the downside is switching back and forth between different builds always require rebuilding NuttX, but I think this is worth the improved developer experience
 - also no longer builds px4io and bootloader in every single build, for most users these rarely change and we're wasting a lot of build time
 2021-11-15 18:47:38 -05:00
Daniel Agar a8c3bcca32 boards: disable CONFIG_STM32H7_SPI_DMATHRESHOLD 2021-11-08 19:20:47 -05:00
David Sidrane 38e2e6a01f Use NuttX MPU Reset (#18283) 
* NuttX with MPU reset backports

* Use NuttX MPU reset
 2021-10-25 18:05:31 -04:00
Daniel Agar 40e5477edb NuttX boards fix mkfatfs and rcS logic 2021-09-01 15:16:00 -04:00
David Sidrane bb913ae11a system_load:Track Dynamic PID hash 2021-08-13 14:22:00 -04:00
David Sidrane 51b1cf774c cuav_nora: Update bootloader defconfig NuttX 10.1.0+ 2021-08-13 14:22:00 -04:00
David Sidrane b8aa6ccaa1 cuav_nora: Update nsh defconfig NuttX 10.1.0+ 2021-08-13 14:22:00 -04:00
David Sidrane 07e38563ba cuav_nora: Disable OTG_ID_GPIO 2021-05-05 20:48:06 +02:00
Daniel Agar 565c644b2e boards: CUAV keep Nora and X7pro in sync 2021-04-05 12:54:41 -04:00
David Sidrane df201342bb cuav nora:Add remaining SRAM4 & DTCM to heap 2021-04-03 14:13:23 -04:00
Daniel Agar 6874e9fba0 boards: NuttX disable all NSH memory debug commands (mb, mh, mw) by default 
- closes https://github.com/PX4/PX4-Autopilot/issues/17062
 2021-03-30 09:23:43 -04:00
Daniel Agar e77bffe582 boards: STM32H7 remove CONFIG_MM_REGIONS=3 2021-03-26 17:40:44 -04:00
David Sidrane ba3a099775 cuav nora:Properly configure BDMA 2021-03-23 05:52:27 -07:00
David Sidrane 3581099c09 Revert "boards: disable BDMA on STM32H7 for now" 
This reverts commit f0d1f1d679.
 2021-03-23 05:52:27 -07:00
David Sidrane 4f3d74b9d3 cuav nora:Enable ADC3 in support of temperature sensing 2021-03-19 15:48:47 +01:00
Daniel Agar 440e72e697 boards: cuav nora/x7pro don't have low speed external (LSE) oscillator 2021-03-09 10:49:57 -05:00
Daniel Agar a0b9b44ff6 boards: stm32h7 set CONFIG_SDMMC1 consistently 2021-03-09 09:37:05 -05:00
Daniel Agar 8f0918a16b boards: remove unused linker __param section 2021-02-08 23:22:48 -05:00
CUAVcaijie e30b8495b8 Enable x7pro and nora spi4 DMA 2021-01-29 21:30:12 -05:00
Daniel Agar f0d1f1d679 boards: disable BDMA on STM32H7 for now 2021-01-28 21:16:23 +01:00
Daniel Agar 1ec10bfcc6 boards: disable CONFIG_ARMV7M_LAZYFPU again (#16573) 
- this was causing hard faults on the CUAV Nora and possibly other boards, disabling everywhere until we fully understand the root cause
 2021-01-17 22:40:21 -05:00
Daniel Agar cb74cb8692 boards: enable CONFIG_ARMV7M_LAZYFPU everywhere 2021-01-12 09:04:38 +01:00
CUAV_gitfishup e399dbc440 boards: CUAV Nora support cuav_neo_v2_pro and disable CONFIG_STM32H7_BDMA 2020-11-13 09:45:57 -05:00
Daniel Agar c60743b306 boards: NuttX increase file name max 32 -> 40 2020-11-08 12:51:59 -05:00
Daniel Agar 233949a377 NuttX upgrade to 10.0.0+ defconfig changes 2020-10-28 14:25:25 -04:00
David Sidrane 9bd88c34a9 cuav_nora: Updates for NuttX 9.1.0+ External schedule_note 2020-09-16 21:32:04 -04:00
David Sidrane 2745ffe946 cuav_nora:Add support for DMA on SPI6 2020-09-16 21:32:04 -04:00
David Sidrane 93e3b52515 cuav_nora Updates for NuttX 9.1.0- 2020-09-16 21:32:04 -04:00
gitfishup f3579e473b boards: CUAV Nora enable UAVCAN 2020-09-01 21:16:17 -04:00
Daniel Agar 2c3441aa90 boards: reduce CONFIG_NFILE_DESCRIPTORS 15 -> 12 
- reduced now that calibration uses uORB::Subscription
 - can likely be reduced further (perhaps < 8) with additional testing
 2020-08-21 10:12:13 -04:00
Daniel Agar 6937dbc5fd boards: add CUAV Nora support 2020-08-12 13:02:16 -04:00