Silvan Fuhrer c26b699f8a tiltrotor: reduce BACKTRANS_THROTTLE_DOWNRAMP_DUR_S from 1 to 0.5s ...

This affects how soon after a backtransition the vehicle has the
full hover controller running again. Specifically it reduces the
duration of the ramp down of the motors prior to tilting them.

Signed-off-by: Silvan Fuhrer <silvan@auterion.com>

2023-06-27 10:11:41 +02:00

..

airship_att_control

VTOL: remove virtual actuator_controls and instead use virtual torque/thrust topics

2023-03-16 11:55:45 +01:00

airspeed_selector

AirspeedValidator: disable innovation checks if lpos invalid

2023-05-08 21:46:45 -04:00

attitude_estimator_q

…

battery_status

…

camera_feedback

Use gimbal attitude for the camera feedback when available

2022-11-14 09:26:14 -05:00

commander

HealthAndArmingChecks: disallow arming via parameter

2023-06-22 13:17:47 +02:00

control_allocator

fix control_allocator: correct PRINT_MODULE_USAGE_NAME

2023-04-13 07:46:09 +02:00

dataman

fix copyright header year range

2023-01-14 09:16:16 -05:00

ekf2

ekf2: update auto-generated code to SymForce 0.9.0

2023-06-26 14:10:54 -04:00

esc_battery

…

events

…

flight_mode_manager

MC_auto: avoid yaw step if previous setpoint is NAN

2023-05-12 13:42:09 +02:00

fw_att_control

FWAttitudeController: params: increases parameter ranges

2023-06-02 10:23:46 +02:00

fw_autotune_attitude_control

VTOL: remove virtual actuator_controls and instead use virtual torque/thrust topics

2023-03-16 11:55:45 +01:00

fw_pos_control

FW TECS: reduce default for FW_T_I_GAIN_THR to more appropriate 0.05

2023-06-02 10:23:46 +02:00

fw_rate_control

FWRateController: use param find for VT_DIFTHR_EN as pure FW build doesn't have VTOL module built

2023-06-19 10:59:20 +02:00

gimbal

gimbal: make device ID a clear out argument

2023-05-08 07:06:37 +02:00

gyro_calibration

create Welford mean Vector with covariance and improve precision with Kahan summation (#20676)

2022-11-30 14:50:13 -05:00

gyro_fft

…

land_detector

mc land detect: use z_deriv and vz for vert movement check

2023-03-21 09:22:58 -04:00

landing_target_estimator

fix(precland): Improved log messages (#21289)

2023-03-13 08:39:31 +01:00

load_mon

…

local_position_estimator

Switch manual_control_setpoint.z scaling from [0,1] to [-1,1]

2022-11-28 19:25:55 +01:00

logger

logger: restart on file write error

2023-06-08 09:52:49 +02:00

mag_bias_estimator

…

manual_control

ManualControlSelectorTest: adapt to using input validity flag

2023-05-23 17:24:17 +02:00

mavlink

mavlink stream: Heartbeat system status should neglect the actuator_armed.lockdown flag in HIL, since this is always enabled for HIL.

2023-06-16 14:21:32 +02:00

mc_att_control

AttitudeControl: remove unnecessary scope operator

2023-04-15 21:57:40 +02:00

mc_autotune_attitude_control

VTOL: remove virtual actuator_controls and instead use virtual torque/thrust topics

2023-03-16 11:55:45 +01:00

mc_hover_thrust_estimator

…

mc_pos_control

mc_pos_control_params: clarify maximum vertical velocity parameters

2023-06-26 17:01:20 +02:00

mc_rate_control

FW Rate Controller: allow to enable/disable yaw axis in Acro (#21566)

2023-05-26 15:09:29 +02:00

muorb

VOXL2 board support updates (#21426)

2023-04-19 11:21:02 -04:00

navigator

Navigator: Mission: improve survey mission resume

2023-06-20 14:38:03 +02:00

payload_deliverer

VTOL: remove virtual actuator_controls and instead use virtual torque/thrust topics

2023-03-16 11:55:45 +01:00

px4iofirmware

NuttX 10.3+ upgrade (#20190)

2022-11-20 20:28:07 -05:00

rc_update

rc_update: throttle trim centering fix for reverse channel

2023-06-06 17:22:33 +02:00

replay

replay: fix replay msg ids larger than 128 (#20865)

2023-01-11 09:13:53 -05:00

rover_pos_control

VTOL: remove virtual actuator_controls and instead use virtual torque/thrust topics

2023-03-16 11:55:45 +01:00

sensors

Use accel of the same instance or primary baro for gyro instances that do not have valid temperature readings in temperature calibration data, use primary baro for magnetometers without valid temperature.

2023-06-07 12:07:29 -04:00

simulation

Support quadtailsitter in SITL

2023-05-29 12:25:20 +02:00

temperature_compensation

param save: Add a blocking API for param saves to be used from shell.

2023-06-21 08:19:52 +02:00

uuv_att_control

VTOL: remove virtual actuator_controls and instead use virtual torque/thrust topics

2023-03-16 11:55:45 +01:00

uuv_pos_control

VTOL: remove virtual actuator_controls and instead use virtual torque/thrust topics

2023-03-16 11:55:45 +01:00

uxrce_dds_client

Micro-XRCE-DDS-Client: update submodule

2023-06-19 16:05:36 -04:00

vtol_att_control

tiltrotor: reduce BACKTRANS_THROTTLE_DOWNRAMP_DUR_S from 1 to 0.5s

2023-06-27 10:11:41 +02:00

Kconfig

…