drivers/device/nuttx/I2C: add transfer failure details

2026-06-04 21:20:05 +08:00 · 2022-04-20 15:08:37 -04:00
321 changed files with 2241 additions and 14064 deletions
@@ -52,7 +52,6 @@ pipeline {
                     "cuav_x7pro_default",
                     "cubepilot_cubeorange_default",
                     "cubepilot_cubeyellow_default",
-                     "diatone_mamba-f405-mk2_default",
                     "freefly_can-rtk-gps_canbootloader",
                     "freefly_can-rtk-gps_default",
                     "holybro_can-gps-v1_canbootloader",
@@ -102,11 +101,9 @@ pipeline {
                     "px4_fmu-v5_uavcanv0periph",
                     "px4_fmu-v5_uavcanv1",
                     "px4_fmu-v5x_default",
-                     "px4_fmu-v6c_default",
                     "px4_fmu-v6u_default",
                     "px4_fmu-v6x_default",
                     "px4_io-v2_default",
-                     "sky-drones_smartap-airlink_default",
                     "spracing_h7extreme_default",
                     "uvify_core_default"
            ],
@@ -30,7 +30,6 @@ jobs:
          cuav_x7pro,
          cubepilot_cubeorange,
          cubepilot_cubeyellow,
-          diatone_mamba-f405-mk2,
          freefly_can-rtk-gps,
          holybro_can-gps-v1,
          holybro_durandal-v1,
@@ -60,10 +59,8 @@ jobs:
          px4_fmu-v4pro,
          px4_fmu-v5,
          px4_fmu-v5x,
-          px4_fmu-v6c,
          px4_fmu-v6u,
          px4_fmu-v6x,
-          sky-drones_smartap-airlink,
          spracing_h7extreme,
          uvify_core
          ]
@@ -9,5 +9,3 @@ launch.json
 ipch/

 browse.vc.db*
-
-*.log
@@ -325,13 +325,12 @@ px4io_update: px4_io-v2_default cubepilot_io-v2_default
 	cp build/px4_io-v2_default/px4_io-v2_default.bin boards/px4/fmu-v5/extras/px4_io-v2_default.bin
 	cp build/px4_io-v2_default/px4_io-v2_default.bin boards/px4/fmu-v5x/extras/px4_io-v2_default.bin
 	cp build/px4_io-v2_default/px4_io-v2_default.bin boards/px4/fmu-v6x/extras/px4_io-v2_default.bin
-	cp build/px4_io-v2_default/px4_io-v2_default.bin boards/px4/fmu-v6c/extras/px4_io-v2_default.bin
 	# cubepilot_io-v2_default
 	cp build/cubepilot_io-v2_default/cubepilot_io-v2_default.bin boards/cubepilot/cubeorange/extras/cubepilot_io-v2_default.bin
 	cp build/cubepilot_io-v2_default/cubepilot_io-v2_default.bin boards/cubepilot/cubeyellow/extras/cubepilot_io-v2_default.bin
 	git status

-bootloaders_update: cuav_nora_bootloader cuav_x7pro_bootloader cubepilot_cubeorange_bootloader holybro_durandal-v1_bootloader holybro_kakuteh7_bootloader matek_h743-slim_bootloader modalai_fc-v2_bootloader mro_ctrl-zero-classic_bootloader mro_ctrl-zero-h7_bootloader mro_ctrl-zero-h7-oem_bootloader mro_pixracerpro_bootloader px4_fmu-v6c_bootloader px4_fmu-v6u_bootloader px4_fmu-v6x_bootloader
+bootloaders_update: cuav_nora_bootloader cuav_x7pro_bootloader cubepilot_cubeorange_bootloader holybro_durandal-v1_bootloader matek_h743-slim_bootloader modalai_fc-v2_bootloader mro_ctrl-zero-h7_bootloader mro_ctrl-zero-h7-oem_bootloader mro_pixracerpro_bootloader px4_fmu-v6u_bootloader px4_fmu-v6x_bootloader
 	git status

 .PHONY: coverity_scan
@@ -88,7 +88,7 @@ unset BOARD_RC_SENSORS
 # Check for flow sensor
 if param compare SENS_EN_PX4FLOW 1
 then
-	px4flow start -X &
+	px4flow start -X
 fi

 uavcannode start
@@ -61,8 +61,6 @@ param set-default HIL_ACT_FUNC6 400

 param set SYS_HITL 1

-param set UAVCAN_ENABLE 0
-
 # disable some checks to allow to fly
 # - with usb
 param set-default CBRK_USB_CHK 197848
@@ -15,8 +15,6 @@ set MIXER quad_x

 param set SYS_HITL 1

-param set UAVCAN_ENABLE 0
-
 param set-default CA_ROTOR_COUNT 4
 param set-default CA_ROTOR0_PX 0.15
 param set-default CA_ROTOR0_PY 0.15
@@ -94,8 +94,6 @@ param set-default HIL_ACT_FUNC8 203

 param set SYS_HITL 1

-param set UAVCAN_ENABLE 0
-
 # disable some checks to allow to fly
 # - with usb
 param set-default CBRK_USB_CHK 197848
@@ -7,8 +7,8 @@
 #
 # @output MAIN1 motor 1
 # @output MAIN2 motor 2
-# @output MAIN3 motor 3
-# @output MAIN4 motor 4
+# @output MAIN3 motor 4
+# @output MAIN4 motor 5
 # @output MAIN5 elevon left
 # @output MAIN6 elevon right
 # @output MAIN7 canard surface
@@ -13,7 +13,7 @@

 . ${R}etc/init.d/rc.vtol_defaults

-param set-default MAV_TYPE 21
+param set-defualt MAV_TYPE 21

 param set-default PWM_AUX_DISARM 1000
 param set-default PWM_AUX_MAX 2000
@@ -22,7 +22,7 @@

 . ${R}etc/init.d/rc.vtol_defaults

-param set-default MAV_TYPE 21
+param set-defualt MAV_TYPE 21

 param set-default CBRK_AIRSPD_CHK 162128

@@ -101,6 +101,12 @@ then
 	pmw3901 -S start
 fi

+# Check for px4flow sensor
+if param compare -s SENS_EN_PX4FLOW 1
+then
+	px4flow start -X
+fi
+
 # vl53l1x i2c distance sensor
 if param compare -s SENS_EN_VL53L1X 1
 then
@@ -129,31 +135,13 @@ fi
 # Sensirion SDP3X differential pressure sensor external I2C
 if param compare -s SENS_EN_SDP3X 1
 then
-	if ! sdp3x start -X
+	if ! sdp3x_airspeed start -X
 	then
 		# try another common address
-		sdp3x start -X -a 0x22
+		sdp3x_airspeed start -X -a 0x22
 	fi
 fi

-# TE MS4515 differential pressure sensor external I2C
-if param compare -s SENS_EN_MS4515 1
-then
-	ms4515 start -X
-fi
-
-# TE MS4525DO differential pressure sensor external I2C
-if param compare -s SENS_EN_MS4525DO 1
-then
-	ms4525do start -X
-fi
-
-# TE MS5525DSO differential pressure sensor external I2C
-if param compare -s SENS_EN_MS5525DS 1
-then
-	ms5525dso start -X
-fi
-
 # SHT3x temperature and hygrometer sensor, external I2C
 if param compare -s SENS_EN_SHT3X 1
 then
@@ -161,6 +149,18 @@ then
 	sht3x start -X -a 0x45
 fi

+# TE MS4525 differential pressure sensor external I2C
+if param compare -s SENS_EN_MS4525 1
+then
+	ms4525_airspeed start -X
+fi
+
+# TE MS5525 differential pressure sensor external I2C
+if param compare -s SENS_EN_MS5525 1
+then
+	ms5525_airspeed start -X
+fi
+
 # IR-LOCK sensor external I2C
 if param compare -s SENS_EN_IRLOCK 1
 then
@@ -198,3 +198,9 @@ then
 	# start last (wait for possible icm20948 passthrough mode)
 	ak09916 -X -q start
 fi
+
+###############################################################################
+#                            End Optional drivers                             #
+###############################################################################
+
+sensors start
@@ -405,7 +405,6 @@ else
 			battery_status start
 		fi

-		sensors start
 		commander start
 	fi

@@ -509,12 +508,6 @@ else
 		gyro_calibration start
 	fi

-	# Check for px4flow sensor
-	if param compare -s SENS_EN_PX4FLOW 1
-	then
-		px4flow start -X &
-	fi
-
 	#
 	# Optional board supplied extras: rc.board_extras
 	#
@@ -16,15 +16,15 @@ if board_adc start
 then
 fi

-if sdp3x start -X
+if sdp3x_airspeed start -X
 then
 fi

-if ms5525dso start -X
+if ms5525_airspeed start -X
 then
 fi

-if ms4525do start -X
+if ms4525_airspeed start -X
 then
 fi

@@ -11,7 +11,7 @@ from pyulog import ULog
 from analysis.detectors import InAirDetector, PreconditionError
 from analysis.metrics import calculate_ecl_ekf_metrics
 from analysis.checks import perform_ecl_ekf_checks
-from analysis.post_processing import get_gps_check_fail_flags
+from analysis.post_processing import get_estimator_check_flags

 def analyse_ekf(
        ulog: ULog, check_levels: Dict[str, float], multi_instance: int = 0,
@@ -40,11 +40,6 @@ def analyse_ekf(
    except:
        raise PreconditionError('could not find estimator_status instance', multi_instance)

-    try:
-        estimator_status_flags = ulog.get_dataset('estimator_status_flags', multi_instance).data
-    except:
-        raise PreconditionError('could not find estimator_status_flags instance', multi_instance)
-
    try:
        _ = ulog.get_dataset('estimator_innovations', multi_instance).data
    except:
@@ -66,14 +61,14 @@ def analyse_ekf(
        'in_air_transition_time': round(in_air.take_off + in_air.log_start, 2),
        'on_ground_transition_time': round(in_air.landing + in_air.log_start, 2)}

-    gps_fail_flags = get_gps_check_fail_flags(estimator_status)
+    control_mode, innov_flags, gps_fail_flags = get_estimator_check_flags(estimator_status)

    sensor_checks, innov_fail_checks = find_checks_that_apply(
-        estimator_status_flags, estimator_status,
+        control_mode, estimator_status,
        pos_checks_when_sensors_not_fused=pos_checks_when_sensors_not_fused)

    metrics = calculate_ecl_ekf_metrics(
-        ulog, estimator_status_flags, innov_fail_checks, sensor_checks, in_air, in_air_no_ground_effects,
+        ulog, innov_flags, innov_fail_checks, sensor_checks, in_air, in_air_no_ground_effects,
        multi_instance, red_thresh=red_thresh, amb_thresh=amb_thresh)

    check_status, master_status = perform_ecl_ekf_checks(
@@ -83,12 +78,12 @@ def analyse_ekf(


 def find_checks_that_apply(
-    estimator_status_flags: dict, estimator_status: dict, pos_checks_when_sensors_not_fused: bool = False) ->\
+    control_mode: dict, estimator_status: dict, pos_checks_when_sensors_not_fused: bool = False) ->\
        Tuple[List[str], List[str]]:
    """
    finds the checks that apply and stores them in lists for the std checks and the innovation
    fail checks.
-    :param estimator_status_flags:
+    :param control_mode:
    :param estimator_status:
    :param b_pos_only_when_sensors_fused:
    :return: a tuple of two lists that contain strings for the std checks and for the innovation
@@ -102,7 +97,7 @@ def find_checks_that_apply(
    innov_fail_checks.append('posv')

    # Magnetometer Sensor Checks
-    if (np.amax(estimator_status_flags['cs_yaw_align']) > 0.5):
+    if (np.amax(control_mode['yaw_aligned']) > 0.5):
        sensor_checks.append('mag')

        innov_fail_checks.append('magx')
@@ -111,14 +106,13 @@ def find_checks_that_apply(
        innov_fail_checks.append('yaw')

    # Velocity Sensor Checks
-    if (np.amax(estimator_status_flags['cs_gps']) > 0.5):
+    if (np.amax(control_mode['using_gps']) > 0.5):
        sensor_checks.append('vel')
-        innov_fail_checks.append('velh')
-        innov_fail_checks.append('velv')
+        innov_fail_checks.append('vel')

    # Position Sensor Checks
-    if (pos_checks_when_sensors_not_fused or (np.amax(estimator_status_flags['cs_gps']) > 0.5)
-        or (np.amax(estimator_status_flags['cs_ev_pos']) > 0.5)):
+    if (pos_checks_when_sensors_not_fused or (np.amax(control_mode['using_gps']) > 0.5)
+        or (np.amax(control_mode['using_evpos']) > 0.5)):
        sensor_checks.append('pos')
        innov_fail_checks.append('posh')

@@ -134,7 +128,7 @@ def find_checks_that_apply(
        innov_fail_checks.append('hagl')

    # optical flow sensor checks
-    if (np.amax(estimator_status_flags['cs_opt_flow']) > 0.5):
+    if (np.amax(control_mode['using_optflow']) > 0.5):
        innov_fail_checks.append('ofx')
        innov_fail_checks.append('ofy')

@@ -123,8 +123,7 @@ def perform_sensor_innov_checks(
                                              ('magy', 'magy_fail_percentage', 'mag'),
                                              ('magz', 'magz_fail_percentage', 'mag'),
                                              ('yaw', 'yaw_fail_percentage', 'yaw'),
-                                              ('velh', 'vel_fail_percentage', 'vel'),
-                                              ('velv', 'vel_fail_percentage', 'vel'),
+                                              ('vel', 'vel_fail_percentage', 'vel'),
                                              ('posh', 'pos_fail_percentage', 'pos'),
                                              ('tas', 'tas_fail_percentage', 'tas'),
                                              ('hagl', 'hagl_fail_percentage', 'hagl'),
@@ -11,7 +11,7 @@ import numpy as np
 from analysis.detectors import InAirDetector

 def calculate_ecl_ekf_metrics(
-        ulog: ULog, estimator_status_flags: Dict[str, float], innov_fail_checks: List[str],
+        ulog: ULog, innov_flags: Dict[str, float], innov_fail_checks: List[str],
        sensor_checks: List[str], in_air: InAirDetector, in_air_no_ground_effects: InAirDetector,
        multi_instance: int = 0, red_thresh: float = 1.0, amb_thresh: float = 0.5) -> Tuple[dict, dict, dict, dict]:

@@ -20,7 +20,7 @@ def calculate_ecl_ekf_metrics(
        red_thresh=red_thresh, amb_thresh=amb_thresh)

    innov_fail_metrics = calculate_innov_fail_metrics(
-        estimator_status_flags, innov_fail_checks, in_air, in_air_no_ground_effects)
+        innov_flags, innov_fail_checks, in_air, in_air_no_ground_effects)

    imu_metrics = calculate_imu_metrics(ulog, multi_instance, in_air_no_ground_effects)

@@ -90,10 +90,10 @@ def calculate_sensor_metrics(


 def calculate_innov_fail_metrics(
-        estimator_status_flags: dict, innov_fail_checks: List[str], in_air: InAirDetector,
+        innov_flags: dict, innov_fail_checks: List[str], in_air: InAirDetector,
        in_air_no_ground_effects: InAirDetector) -> dict:
    """
-    :param estimator_status_flags:
+    :param innov_flags:
    :param innov_fail_checks:
    :param in_air:
    :param in_air_no_ground_effects:
@@ -103,18 +103,17 @@ def calculate_innov_fail_metrics(
    innov_fail_metrics = dict()

    # calculate innovation check fail metrics
-    for signal_id, signal, result in [('posv', 'reject_ver_pos', 'hgt_fail_percentage'),
-                                      ('magx', 'reject_mag_x', 'magx_fail_percentage'),
-                                      ('magy', 'reject_mag_y', 'magy_fail_percentage'),
-                                      ('magz', 'reject_mag_z', 'magz_fail_percentage'),
-                                      ('yaw', 'reject_yaw', 'yaw_fail_percentage'),
-                                      ('velh', 'reject_hor_vel', 'vel_fail_percentage'),
-                                      ('velv', 'reject_ver_vel', 'vel_fail_percentage'),
-                                      ('posh', 'reject_hor_pos', 'pos_fail_percentage'),
-                                      ('tas', 'reject_airspeed', 'tas_fail_percentage'),
-                                      ('hagl', 'reject_hagl', 'hagl_fail_percentage'),
-                                      ('ofx', 'reject_optflow_x', 'ofx_fail_percentage'),
-                                      ('ofy', 'reject_optflow_y', 'ofy_fail_percentage')]:
+    for signal_id, signal, result in [('posv', 'posv_innov_fail', 'hgt_fail_percentage'),
+                                      ('magx', 'magx_innov_fail', 'magx_fail_percentage'),
+                                      ('magy', 'magy_innov_fail', 'magy_fail_percentage'),
+                                      ('magz', 'magz_innov_fail', 'magz_fail_percentage'),
+                                      ('yaw', 'yaw_innov_fail', 'yaw_fail_percentage'),
+                                      ('vel', 'vel_innov_fail', 'vel_fail_percentage'),
+                                      ('posh', 'posh_innov_fail', 'pos_fail_percentage'),
+                                      ('tas', 'tas_innov_fail', 'tas_fail_percentage'),
+                                      ('hagl', 'hagl_innov_fail', 'hagl_fail_percentage'),
+                                      ('ofx', 'ofx_innov_fail', 'ofx_fail_percentage'),
+                                      ('ofy', 'ofy_innov_fail', 'ofy_fail_percentage')]:

        # only run innov fail checks, if they apply.
        if signal_id in innov_fail_checks:
@@ -126,7 +125,7 @@ def calculate_innov_fail_metrics(
                in_air_detector = in_air

            innov_fail_metrics[result] = calculate_stat_from_signal(
-                estimator_status_flags, 'estimator_status_flags', signal, in_air_detector,
+                innov_flags, 'estimator_status', signal, in_air_detector,
                lambda x: 100.0 * np.mean(x > 0.5))

    return innov_fail_metrics
@@ -153,7 +152,7 @@ def calculate_imu_metrics(ulog: ULog, multi_instance, in_air_no_ground_effects:

            if vehicle_imu_status_data['accel_device_id'][0] == estimator_status_data['accel_device_id'][0]:

-                for signal, result in [('gyro_coning_vibration', 'imu_coning'),
+                for signal, result in [('delta_angle_coning_metric', 'imu_coning'),
                                       ('gyro_vibration_metric', 'imu_hfgyro'),
                                       ('accel_vibration_metric', 'imu_hfaccel')]:

@@ -7,6 +7,115 @@ from typing import Tuple

 import numpy as np

+
+def get_estimator_check_flags(estimator_status: dict) -> Tuple[dict, dict, dict]:
+    """
+    :param estimator_status:
+    :return:
+    """
+    control_mode = get_control_mode_flags(estimator_status)
+    innov_flags = get_innovation_check_flags(estimator_status)
+    gps_fail_flags = get_gps_check_fail_flags(estimator_status)
+    return control_mode, innov_flags, gps_fail_flags
+
+
+def get_control_mode_flags(estimator_status: dict) -> dict:
+    """
+    :param estimator_status:
+    :return:
+    """
+
+    control_mode = dict()
+    # extract control mode metadata from estimator_status.control_mode_flags
+    # 0 - true if the filter tilt alignment is complete
+    # 1 - true if the filter yaw alignment is complete
+    # 2 - true if GPS measurements are being fused
+    # 3 - true if optical flow measurements are being fused
+    # 4 - true if a simple magnetic yaw heading is being fused
+    # 5 - true if 3-axis magnetometer measurement are being fused
+    # 6 - true if synthetic magnetic declination measurements are being fused
+    # 7 - true when the vehicle is airborne
+    # 8 - true when wind velocity is being estimated
+    # 9 - true when baro height is being fused as a primary height reference
+    # 10 - true when range finder height is being fused as a primary height reference
+    # 11 - true when range finder height is being fused as a primary height reference
+    # 12 - true when local position data from external vision is being fused
+    # 13 - true when yaw data from external vision measurements is being fused
+    # 14 - true when height data from external vision measurements is being fused
+    # 15 - true when synthetic sideslip measurements are being fused
+    # 16 - true true when the mag field does not match the expected strength
+    # 17 - true true when the vehicle is operating as a fixed wing vehicle
+    # 18 - true when the magnetometer has been declared faulty and is no longer being used
+    # 19 - true true when airspeed measurements are being fused
+    # 20 - true true when protection from ground effect induced static pressure rise is active
+    # 21 - true when rng data wasn't ready for more than 10s and new rng values haven't changed enough
+    # 22 - true when yaw (not ground course) data from a GPS receiver is being fused
+    # 23 - true when the in-flight mag field alignment has been completed
+    # 24 - true when local earth frame velocity data from external vision measurements are being fused
+    # 25 - true when we are using a synthesized measurement for the magnetometer Z component
+    control_mode['tilt_aligned'] = ((2 ** 0 & estimator_status['control_mode_flags']) > 0) * 1
+    control_mode['yaw_aligned'] = ((2 ** 1 & estimator_status['control_mode_flags']) > 0) * 1
+    control_mode['using_gps'] = ((2 ** 2 & estimator_status['control_mode_flags']) > 0) * 1
+    control_mode['using_optflow'] = ((2 ** 3 & estimator_status['control_mode_flags']) > 0) * 1
+    control_mode['using_magyaw'] = ((2 ** 4 & estimator_status['control_mode_flags']) > 0) * 1
+    control_mode['using_mag3d'] = ((2 ** 5 & estimator_status['control_mode_flags']) > 0) * 1
+    control_mode['using_magdecl'] = ((2 ** 6 & estimator_status['control_mode_flags']) > 0) * 1
+    control_mode['airborne'] = ((2 ** 7 & estimator_status['control_mode_flags']) > 0) * 1
+    control_mode['estimating_wind'] = ((2 ** 8 & estimator_status['control_mode_flags']) > 0) * 1
+    control_mode['using_barohgt'] = ((2 ** 9 & estimator_status['control_mode_flags']) > 0) * 1
+    control_mode['using_rnghgt'] = ((2 ** 10 & estimator_status['control_mode_flags']) > 0) * 1
+    control_mode['using_gpshgt'] = ((2 ** 11 & estimator_status['control_mode_flags']) > 0) * 1
+    control_mode['using_evpos'] = ((2 ** 12 & estimator_status['control_mode_flags']) > 0) * 1
+    control_mode['using_evyaw'] = ((2 ** 13 & estimator_status['control_mode_flags']) > 0) * 1
+    control_mode['using_evhgt'] = ((2 ** 14 & estimator_status['control_mode_flags']) > 0) * 1
+    control_mode['fuse_beta'] = ((2 ** 15 & estimator_status['control_mode_flags']) > 0) * 1
+    control_mode['mag_field_disturbed'] = ((2 ** 16 & estimator_status['control_mode_flags']) > 0) * 1
+    control_mode['fixed_wing'] = ((2 ** 17 & estimator_status['control_mode_flags']) > 0) * 1
+    control_mode['mag_fault'] = ((2 ** 18 & estimator_status['control_mode_flags']) > 0) * 1
+    control_mode['fuse_aspd'] = ((2 ** 19 & estimator_status['control_mode_flags']) > 0) * 1
+    control_mode['gnd_effect'] = ((2 ** 20 & estimator_status['control_mode_flags']) > 0) * 1
+    control_mode['rng_stuck'] = ((2 ** 21 & estimator_status['control_mode_flags']) > 0) * 1
+    control_mode['gps_yaw'] = ((2 ** 22 & estimator_status['control_mode_flags']) > 0) * 1
+    control_mode['mag_aligned_in_flight'] = ((2 ** 23 & estimator_status['control_mode_flags']) > 0) * 1
+    control_mode['ev_vel'] = ((2 ** 24 & estimator_status['control_mode_flags']) > 0) * 1
+    control_mode['synthetic_mag_z'] = ((2 ** 25 & estimator_status['control_mode_flags']) > 0) * 1
+    return control_mode
+
+def get_innovation_check_flags(estimator_status: dict) -> dict:
+    """
+    :param estimator_status:
+    :return:
+    """
+
+    innov_flags = dict()
+    # innovation_check_flags summary
+    # 0 - true if velocity observations have been rejected
+    # 1 - true if horizontal position observations have been rejected
+    # 2 - true if true if vertical position observations have been rejected
+    # 3 - true if the X magnetometer observation has been rejected
+    # 4 - true if the Y magnetometer observation has been rejected
+    # 5 - true if the Z magnetometer observation has been rejected
+    # 6 - true if the yaw observation has been rejected
+    # 7 - true if the airspeed observation has been rejected
+    # 8 - true if synthetic sideslip observation has been rejected
+    # 9 - true if the height above ground observation has been rejected
+    # 10 - true if the X optical flow observation has been rejected
+    # 11 - true if the Y optical flow observation has been rejected
+    innov_flags['vel_innov_fail'] = ((2 ** 0 & estimator_status['innovation_check_flags']) > 0) * 1
+    innov_flags['posh_innov_fail'] = ((2 ** 1 & estimator_status['innovation_check_flags']) > 0) * 1
+    innov_flags['posv_innov_fail'] = ((2 ** 2 & estimator_status['innovation_check_flags']) > 0) * 1
+    innov_flags['magx_innov_fail'] = ((2 ** 3 & estimator_status['innovation_check_flags']) > 0) * 1
+    innov_flags['magy_innov_fail'] = ((2 ** 4 & estimator_status['innovation_check_flags']) > 0) * 1
+    innov_flags['magz_innov_fail'] = ((2 ** 5 & estimator_status['innovation_check_flags']) > 0) * 1
+    innov_flags['yaw_innov_fail'] = ((2 ** 6 & estimator_status['innovation_check_flags']) > 0) * 1
+    innov_flags['tas_innov_fail'] = ((2 ** 7 & estimator_status['innovation_check_flags']) > 0) * 1
+    innov_flags['sli_innov_fail'] = ((2 ** 8 & estimator_status['innovation_check_flags']) > 0) * 1
+    innov_flags['hagl_innov_fail'] = ((2 ** 9 & estimator_status['innovation_check_flags']) > 0) * 1
+    innov_flags['ofx_innov_fail'] = ((2 ** 10 & estimator_status['innovation_check_flags']) > 0) * 1
+    innov_flags['ofy_innov_fail'] = ((2 ** 11 & estimator_status['innovation_check_flags']) > 0) * 1
+    return innov_flags
+
+
 def get_gps_check_fail_flags(estimator_status: dict) -> dict:
    """
    :param estimator_status:
@@ -29,12 +29,12 @@
    ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
    POSSIBILITY OF SUCH DAMAGE.

-File: mc_wind_estimator_tuning.py
+File: drag_replay.py
 Author: Mathieu Bresciani <mathieu@auterion.com>
 License: BSD 3-Clause
 Description:
    Find the best ballistic and momentum drag coefficients for wind estimation
-    using flight test data from a `.ulg` file.
+    using EKF2 replay data.
    NOTE: this script currently assumes no wind.
 """

@@ -191,7 +191,7 @@ if __name__ == '__main__':

    # Parse arguments
    parser = argparse.ArgumentParser(
-        description='Estimate the ballistic and momentum drag coefficients of a multirotor using a ULog file')
+        description='Estimate mag biases from ULog file')

    # Provide parameter file path and name
    parser.add_argument('logfile', help='Full ulog file path, name and extension', type=str)
@@ -11,7 +11,7 @@ import numpy as np
 from matplotlib.backends.backend_pdf import PdfPages
 from pyulog import ULog

-from analysis.post_processing import magnetic_field_estimates_from_states, get_gps_check_fail_flags
+from analysis.post_processing import magnetic_field_estimates_from_states, get_estimator_check_flags
 from plotting.data_plots import TimeSeriesPlot, InnovationPlot, ControlModeSummaryPlot, \
    CheckFlagsPlot
 from analysis.detectors import PreconditionError
@@ -33,11 +33,6 @@ def create_pdf_report(ulog: ULog, multi_instance: int, output_plot_filename: str
    except:
        raise PreconditionError('could not find estimator_status instance', multi_instance)

-    try:
-        estimator_status_flags = ulog.get_dataset('estimator_status_flags', multi_instance).data
-    except:
-        raise PreconditionError('could not find estimator_status_flags instance', multi_instance)
-
    try:
        estimator_states = ulog.get_dataset('estimator_states', multi_instance).data
    except:
@@ -73,13 +68,12 @@ def create_pdf_report(ulog: ULog, multi_instance: int, output_plot_filename: str
    except:
        raise PreconditionError('could not find innovation data')

-    gps_fail_flags = get_gps_check_fail_flags(estimator_status)
+    control_mode, innov_flags, gps_fail_flags = get_estimator_check_flags(estimator_status)

    status_time = 1e-6 * estimator_status['timestamp']
-    status_flags_time = 1e-6 * estimator_status_flags['timestamp']

    b_finishes_in_air, b_starts_in_air, in_air_duration, in_air_transition_time, \
-    on_ground_transition_time = detect_airtime(estimator_status_flags, status_flags_time)
+    on_ground_transition_time = detect_airtime(control_mode, status_time)

    with PdfPages(output_plot_filename) as pdf_pages:

@@ -179,9 +173,9 @@ def create_pdf_report(ulog: ULog, multi_instance: int, output_plot_filename: str

        # plot control mode summary A
        data_plot = ControlModeSummaryPlot(
-            status_flags_time, estimator_status_flags, [['cs_tilt_align', 'cs_yaw_align'],
-            ['cs_gps', 'cs_opt_flow', 'cs_ev_pos'], ['cs_baro_hgt', 'cs_gps_hgt',
-             'cs_rng_hgt', 'cs_ev_hgt'], ['cs_mag_hdg', 'cs_mag_3d', 'cs_mag_dec']],
+            status_time, control_mode, [['tilt_aligned', 'yaw_aligned'],
+            ['using_gps', 'using_optflow', 'using_evpos'], ['using_barohgt', 'using_gpshgt',
+             'using_rnghgt', 'using_evhgt'], ['using_magyaw', 'using_mag3d', 'using_magdecl']],
            x_label='time (sec)', y_labels=['aligned', 'pos aiding', 'hgt aiding', 'mag aiding'],
            annotation_text=[['tilt alignment', 'yaw alignment'], ['GPS aiding', 'optical flow aiding',
             'external vision aiding'], ['Baro aiding', 'GPS aiding', 'rangefinder aiding',
@@ -194,7 +188,7 @@ def create_pdf_report(ulog: ULog, multi_instance: int, output_plot_filename: str
        # plot control mode summary B
        # construct additional annotations for the airborne plot
        airborne_annotations = list()
-        if np.amin(np.diff(estimator_status_flags['cs_in_air'])) > -0.5:
+        if np.amin(np.diff(control_mode['airborne'])) > -0.5:
            airborne_annotations.append(
                (on_ground_transition_time, 'air to ground transition not detected'))
        else:
@@ -203,7 +197,7 @@ def create_pdf_report(ulog: ULog, multi_instance: int, output_plot_filename: str
        if in_air_duration > 0.0:
            airborne_annotations.append(((in_air_transition_time + on_ground_transition_time) / 2,
                                         'duration = {:.1f} sec'.format(in_air_duration)))
-        if np.amax(np.diff(estimator_status_flags['cs_in_air'])) < 0.5:
+        if np.amax(np.diff(control_mode['airborne'])) < 0.5:
            airborne_annotations.append(
                (in_air_transition_time, 'ground to air transition not detected'))
        else:
@@ -211,7 +205,7 @@ def create_pdf_report(ulog: ULog, multi_instance: int, output_plot_filename: str
                (in_air_transition_time, 'in-air at {:.1f} sec'.format(in_air_transition_time)))

        data_plot = ControlModeSummaryPlot(
-            status_flags_time, estimator_status_flags, [['cs_in_air'], ['cs_wind']],
+            status_time, control_mode, [['airborne'], ['estimating_wind']],
            x_label='time (sec)', y_labels=['airborne', 'estimating wind'], annotation_text=[[], []],
            additional_annotation=[airborne_annotations, []],
            plot_title='EKF Control Status - Figure B', pdf_handle=pdf_pages)
@@ -220,15 +214,15 @@ def create_pdf_report(ulog: ULog, multi_instance: int, output_plot_filename: str

        # plot innovation_check_flags summary
        data_plot = CheckFlagsPlot(
-            status_flags_time, estimator_status_flags, [['reject_hor_vel', 'reject_hor_pos'], ['reject_ver_vel', 'reject_ver_pos',
-                                                                               'reject_hagl'],
-                                       ['reject_mag_x', 'reject_mag_y', 'reject_mag_z',
-                                        'reject_yaw'], ['reject_airspeed'], ['reject_sideslip'],
-                                       ['reject_optflow_x',
-                                        'reject_optflow_y']], x_label='time (sec)',
+            status_time, innov_flags, [['vel_innov_fail', 'posh_innov_fail'], ['posv_innov_fail',
+                                                                               'hagl_innov_fail'],
+                                       ['magx_innov_fail', 'magy_innov_fail', 'magz_innov_fail',
+                                        'yaw_innov_fail'], ['tas_innov_fail'], ['sli_innov_fail'],
+                                       ['ofx_innov_fail',
+                                        'ofy_innov_fail']], x_label='time (sec)',
            y_labels=['failed', 'failed', 'failed', 'failed', 'failed', 'failed'],
            y_lim=(-0.1, 1.1),
-            legend=[['vel NE', 'pos NE'], ['vel D', 'hgt absolute', 'hgt above ground'],
+            legend=[['vel NED', 'pos NE'], ['hgt absolute', 'hgt above ground'],
                    ['mag_x', 'mag_y', 'mag_z', 'yaw'], ['airspeed'], ['sideslip'],
                    ['flow X', 'flow Y']],
            plot_title='EKF Innovation Test Fails', annotate=False, pdf_handle=pdf_pages)
@@ -350,33 +344,33 @@ def create_pdf_report(ulog: ULog, multi_instance: int, output_plot_filename: str
        data_plot.close()


-def detect_airtime(estimator_status_flags, status_flags_time):
+def detect_airtime(control_mode, status_time):
    # define flags for starting and finishing in air
    b_starts_in_air = False
    b_finishes_in_air = False
    # calculate in-air transition time
-    if (np.amin(estimator_status_flags['cs_in_air']) < 0.5) and (np.amax(estimator_status_flags['cs_in_air']) > 0.5):
-        in_air_transtion_time_arg = np.argmax(np.diff(estimator_status_flags['cs_in_air']))
-        in_air_transition_time = status_flags_time[in_air_transtion_time_arg]
-    elif (np.amax(estimator_status_flags['cs_in_air']) > 0.5):
-        in_air_transition_time = np.amin(status_flags_time)
+    if (np.amin(control_mode['airborne']) < 0.5) and (np.amax(control_mode['airborne']) > 0.5):
+        in_air_transtion_time_arg = np.argmax(np.diff(control_mode['airborne']))
+        in_air_transition_time = status_time[in_air_transtion_time_arg]
+    elif (np.amax(control_mode['airborne']) > 0.5):
+        in_air_transition_time = np.amin(status_time)
        print('log starts while in-air at ' + str(round(in_air_transition_time, 1)) + ' sec')
        b_starts_in_air = True
    else:
        in_air_transition_time = float('NaN')
        print('always on ground')
    # calculate on-ground transition time
-    if (np.amin(np.diff(estimator_status_flags['cs_in_air'])) < 0.0):
-        on_ground_transition_time_arg = np.argmin(np.diff(estimator_status_flags['cs_in_air']))
-        on_ground_transition_time = status_flags_time[on_ground_transition_time_arg]
-    elif (np.amax(estimator_status_flags['cs_in_air']) > 0.5):
-        on_ground_transition_time = np.amax(status_flags_time)
+    if (np.amin(np.diff(control_mode['airborne'])) < 0.0):
+        on_ground_transition_time_arg = np.argmin(np.diff(control_mode['airborne']))
+        on_ground_transition_time = status_time[on_ground_transition_time_arg]
+    elif (np.amax(control_mode['airborne']) > 0.5):
+        on_ground_transition_time = np.amax(status_time)
        print('log finishes while in-air at ' + str(round(on_ground_transition_time, 1)) + ' sec')
        b_finishes_in_air = True
    else:
        on_ground_transition_time = float('NaN')
        print('always on ground')
-    if (np.amax(np.diff(estimator_status_flags['cs_in_air'])) > 0.5) and (np.amin(np.diff(estimator_status_flags['cs_in_air'])) < -0.5):
+    if (np.amax(np.diff(control_mode['airborne'])) > 0.5) and (np.amin(np.diff(control_mode['airborne'])) < -0.5):
        if ((on_ground_transition_time - in_air_transition_time) > 0.0):
            in_air_duration = on_ground_transition_time - in_air_transition_time
        else:
@@ -130,7 +130,8 @@ CONFIG_SCHED_LPWORKSTACKSIZE=1632
 CONFIG_SCHED_WAITPID=y
 CONFIG_SDCLONE_DISABLE=y
 CONFIG_SDIO_BLOCKSETUP=y
-CONFIG_SEM_PREALLOCHOLDERS=32
+CONFIG_SEM_NNESTPRIO=8
+CONFIG_SEM_PREALLOCHOLDERS=0
 CONFIG_SERIAL_IFLOWCONTROL_WATERMARKS=y
 CONFIG_SERIAL_TERMIOS=y
 CONFIG_SIG_DEFAULT=y
@@ -173,7 +174,7 @@ CONFIG_STM32_SPI1=y
 CONFIG_STM32_SPI2=y
 CONFIG_STM32_SPI4=y
 CONFIG_STM32_SPI4_DMA=y
-CONFIG_STM32_SPI4_DMA_BUFFER=512
+CONFIG_STM32_SPI4_DMA_BUFFER=1024
 CONFIG_STM32_SPI_DMA=y
 CONFIG_STM32_SPI_DMATHRESHOLD=8
 CONFIG_STM32_TIM10=y
@@ -105,7 +105,8 @@ CONFIG_SCHED_LPWORK=y
 CONFIG_SCHED_LPWORKPRIORITY=50
 CONFIG_SCHED_LPWORKSTACKSIZE=1632
 CONFIG_SCHED_WAITPID=y
-CONFIG_SEM_PREALLOCHOLDERS=32
+CONFIG_SEM_NNESTPRIO=8
+CONFIG_SEM_PREALLOCHOLDERS=0
 CONFIG_SERIAL_TERMIOS=y
 CONFIG_SIG_DEFAULT=y
 CONFIG_SIG_SIGALRM_ACTION=y
@@ -107,7 +107,8 @@ CONFIG_SCHED_LPWORK=y
 CONFIG_SCHED_LPWORKPRIORITY=50
 CONFIG_SCHED_LPWORKSTACKSIZE=1632
 CONFIG_SCHED_WAITPID=y
-CONFIG_SEM_PREALLOCHOLDERS=32
+CONFIG_SEM_NNESTPRIO=8
+CONFIG_SEM_PREALLOCHOLDERS=0
 CONFIG_SERIAL_TERMIOS=y
 CONFIG_SIG_DEFAULT=y
 CONFIG_SIG_SIGALRM_ACTION=y
@@ -107,7 +107,8 @@ CONFIG_SCHED_LPWORK=y
 CONFIG_SCHED_LPWORKPRIORITY=50
 CONFIG_SCHED_LPWORKSTACKSIZE=1632
 CONFIG_SCHED_WAITPID=y
-CONFIG_SEM_PREALLOCHOLDERS=32
+CONFIG_SEM_NNESTPRIO=8
+CONFIG_SEM_PREALLOCHOLDERS=0
 CONFIG_SERIAL_TERMIOS=y
 CONFIG_SIG_DEFAULT=y
 CONFIG_SIG_SIGALRM_ACTION=y
@@ -61,10 +61,10 @@ fi
 # Sensirion SDP3X differential pressure sensor external I2C
 if param compare -s SENS_EN_SDP3X 1
 then
-	if ! sdp3x start -X
+	if ! sdp3x_airspeed start -X
 	then
 		# try another common address
-		sdp3x start -X -a 0x22
+		sdp3x_airspeed start -X -a 0x22
 	fi
 fi

@@ -75,16 +75,16 @@ then
 	sht3x start -X -a 0x45
 fi

-# TE MS4525DO differential pressure sensor external I2C
-if param compare -s SENS_EN_MS4525DO 1
+# TE MS4525 differential pressure sensor external I2C
+if param compare -s SENS_EN_MS4525 1
 then
-	ms4525do start -X
+	ms4525_airspeed start -X
 fi

-# TE MS5525DSO differential pressure sensor external I2C
-if param compare -s SENS_EN_MS5525DS 1
+# TE MS5525 differential pressure sensor external I2C
+if param compare -s SENS_EN_MS5525 1
 then
-	ms5525dso start -X
+	ms5525_airspeed start -X
 fi

 # IR-LOCK sensor external I2C
@@ -107,7 +107,8 @@ CONFIG_SCHED_LPWORK=y
 CONFIG_SCHED_LPWORKPRIORITY=50
 CONFIG_SCHED_LPWORKSTACKSIZE=1632
 CONFIG_SCHED_WAITPID=y
-CONFIG_SEM_PREALLOCHOLDERS=32
+CONFIG_SEM_NNESTPRIO=8
+CONFIG_SEM_PREALLOCHOLDERS=0
 CONFIG_SERIAL_TERMIOS=y
 CONFIG_SIG_DEFAULT=y
 CONFIG_SIG_SIGALRM_ACTION=y
@@ -140,7 +140,8 @@ CONFIG_SCHED_WAITPID=y
 CONFIG_SDCLONE_DISABLE=y
 CONFIG_SDMMC1_SDIO_MODE=y
 CONFIG_SDMMC1_SDIO_PULLUP=y
-CONFIG_SEM_PREALLOCHOLDERS=32
+CONFIG_SEM_NNESTPRIO=8
+CONFIG_SEM_PREALLOCHOLDERS=0
 CONFIG_SERIAL_IFLOWCONTROL_WATERMARKS=y
 CONFIG_SERIAL_TERMIOS=y
 CONFIG_SIG_DEFAULT=y
@@ -11,7 +11,7 @@ lps22hb -s start

 lsm303agr -s -R 4 start

-ms4515 -I -b 3 start
+ms4525_airspeed -T 4515 -I -b 3 start

 if ! param greater SENS_EN_PMW3901 0
 then
@@ -162,7 +162,8 @@ CONFIG_SCHED_WAITPID=y
 CONFIG_SDCLONE_DISABLE=y
 CONFIG_SDMMC1_SDIO_MODE=y
 CONFIG_SDMMC1_SDIO_PULLUP=y
-CONFIG_SEM_PREALLOCHOLDERS=32
+CONFIG_SEM_NNESTPRIO=8
+CONFIG_SEM_PREALLOCHOLDERS=0
 CONFIG_SERIAL_TERMIOS=y
 CONFIG_SIG_DEFAULT=y
 CONFIG_SIG_SIGALRM_ACTION=y
@@ -126,7 +126,8 @@ CONFIG_SCHED_LPWORKPRIORITY=50
 CONFIG_SCHED_LPWORKSTACKSIZE=1632
 CONFIG_SCHED_WAITPID=y
 CONFIG_SDCLONE_DISABLE=y
-CONFIG_SEM_PREALLOCHOLDERS=32
+CONFIG_SEM_NNESTPRIO=8
+CONFIG_SEM_PREALLOCHOLDERS=0
 CONFIG_SERIAL_TERMIOS=y
 CONFIG_SIG_DEFAULT=y
 CONFIG_SIG_SIGALRM_ACTION=y
@@ -125,7 +125,8 @@ CONFIG_SCHED_LPWORKPRIORITY=50
 CONFIG_SCHED_LPWORKSTACKSIZE=1632
 CONFIG_SCHED_WAITPID=y
 CONFIG_SDCLONE_DISABLE=y
-CONFIG_SEM_PREALLOCHOLDERS=32
+CONFIG_SEM_NNESTPRIO=8
+CONFIG_SEM_PREALLOCHOLDERS=0
 CONFIG_SERIAL_TERMIOS=y
 CONFIG_SIG_DEFAULT=y
 CONFIG_SIG_SIGALRM_ACTION=y
@@ -108,7 +108,8 @@ CONFIG_SCHED_LPWORK=y
 CONFIG_SCHED_LPWORKPRIORITY=50
 CONFIG_SCHED_LPWORKSTACKSIZE=1632
 CONFIG_SCHED_WAITPID=y
-CONFIG_SEM_PREALLOCHOLDERS=32
+CONFIG_SEM_NNESTPRIO=8
+CONFIG_SEM_PREALLOCHOLDERS=0
 CONFIG_SERIAL_TERMIOS=y
 CONFIG_SIG_DEFAULT=y
 CONFIG_SIG_SIGALRM_ACTION=y
@@ -139,7 +139,8 @@ CONFIG_SCHED_LPWORKSTACKSIZE=1632
 CONFIG_SCHED_WAITPID=y
 CONFIG_SDCLONE_DISABLE=y
 CONFIG_SDMMC1_SDIO_PULLUP=y
-CONFIG_SEM_PREALLOCHOLDERS=32
+CONFIG_SEM_NNESTPRIO=8
+CONFIG_SEM_PREALLOCHOLDERS=0
 CONFIG_SERIAL_IFLOWCONTROL_WATERMARKS=y
 CONFIG_SERIAL_TERMIOS=y
 CONFIG_SIG_DEFAULT=y
@@ -111,7 +111,6 @@ MEMORY
 {
 	ITCM_RAM  (rwx) : ORIGIN = 0x00000000, LENGTH =   64K
 	FLASH      (rx) : ORIGIN = 0x08020000, LENGTH = 1920K
-
 	DTCM1_RAM (rwx) : ORIGIN = 0x20000000, LENGTH =   64K
 	DTCM2_RAM (rwx) : ORIGIN = 0x20010000, LENGTH =   64K
 	AXI_SRAM  (rwx) : ORIGIN = 0x24000000, LENGTH =  512K /* D1 domain AXI bus */
@@ -187,12 +186,7 @@ SECTIONS
 		*(.gnu.linkonce.d.*)
 		CONSTRUCTORS
 		_edata = ABSOLUTE(.);
-
-		/* Pad out last section as the STM32H7 Flash write size is 256 bits. 32 bytes */
-		. = ALIGN(16);
-		FILL(0xffff)
-		. += 16;
-	} > AXI_SRAM AT > FLASH  = 0xffff
+	} > AXI_SRAM AT > FLASH

 	.bss : {
 		_sbss = ABSOLUTE(.);
@@ -138,7 +138,8 @@ CONFIG_SCHED_LPWORKSTACKSIZE=1632
 CONFIG_SCHED_WAITPID=y
 CONFIG_SDCLONE_DISABLE=y
 CONFIG_SDMMC1_SDIO_PULLUP=y
-CONFIG_SEM_PREALLOCHOLDERS=32
+CONFIG_SEM_NNESTPRIO=8
+CONFIG_SEM_PREALLOCHOLDERS=0
 CONFIG_SERIAL_IFLOWCONTROL_WATERMARKS=y
 CONFIG_SERIAL_TERMIOS=y
 CONFIG_SIG_DEFAULT=y
@@ -111,7 +111,6 @@ MEMORY
 {
 	ITCM_RAM  (rwx) : ORIGIN = 0x00000000, LENGTH =   64K
 	FLASH      (rx) : ORIGIN = 0x08020000, LENGTH = 1920K
-
 	DTCM1_RAM (rwx) : ORIGIN = 0x20000000, LENGTH =   64K
 	DTCM2_RAM (rwx) : ORIGIN = 0x20010000, LENGTH =   64K
 	AXI_SRAM  (rwx) : ORIGIN = 0x24000000, LENGTH =  512K /* D1 domain AXI bus */
@@ -187,12 +186,7 @@ SECTIONS
 		*(.gnu.linkonce.d.*)
 		CONSTRUCTORS
 		_edata = ABSOLUTE(.);
-
-		/* Pad out last section as the STM32H7 Flash write size is 256 bits. 32 bytes */
-		. = ALIGN(16);
-		FILL(0xffff)
-		. += 16;
-	} > AXI_SRAM AT > FLASH  = 0xffff
+	} > AXI_SRAM AT > FLASH

 	.bss : {
 		_sbss = ABSOLUTE(.);
@@ -140,7 +140,8 @@ CONFIG_SCHED_LPWORKSTACKSIZE=1632
 CONFIG_SCHED_WAITPID=y
 CONFIG_SDCLONE_DISABLE=y
 CONFIG_SDMMC1_SDIO_PULLUP=y
-CONFIG_SEM_PREALLOCHOLDERS=32
+CONFIG_SEM_NNESTPRIO=8
+CONFIG_SEM_PREALLOCHOLDERS=0
 CONFIG_SERIAL_IFLOWCONTROL_WATERMARKS=y
 CONFIG_SERIAL_TERMIOS=y
 CONFIG_SIG_DEFAULT=y
@@ -187,12 +187,7 @@ SECTIONS
 		*(.gnu.linkonce.d.*)
 		CONSTRUCTORS
 		_edata = ABSOLUTE(.);
-
-		/* Pad out last section as the STM32H7 Flash write size is 256 bits. 32 bytes */
-		. = ALIGN(16);
-		FILL(0xffff)
-		. += 16;
-	} > AXI_SRAM AT > FLASH  = 0xffff
+	} > AXI_SRAM AT > FLASH

 	.bss : {
 		_sbss = ABSOLUTE(.);
@@ -138,7 +138,8 @@ CONFIG_SCHED_LPWORKSTACKSIZE=1632
 CONFIG_SCHED_WAITPID=y
 CONFIG_SDCLONE_DISABLE=y
 CONFIG_SDMMC1_SDIO_PULLUP=y
-CONFIG_SEM_PREALLOCHOLDERS=32
+CONFIG_SEM_NNESTPRIO=8
+CONFIG_SEM_PREALLOCHOLDERS=0
 CONFIG_SERIAL_IFLOWCONTROL_WATERMARKS=y
 CONFIG_SERIAL_TERMIOS=y
 CONFIG_SIG_DEFAULT=y
@@ -4,7 +4,6 @@ CONFIG_DRIVERS_IRLOCK=n
 CONFIG_DRIVERS_PCA9685=n
 CONFIG_DRIVERS_PCA9685_PWM_OUT=n
 CONFIG_DRIVERS_RPM=n
-CONFIG_EXAMPLES_FAKE_GPS=n
 CONFIG_MODULES_ATTITUDE_ESTIMATOR_Q=n
 CONFIG_MODULES_LOCAL_POSITION_ESTIMATOR=n
 CONFIG_MODULES_ROVER_POS_CONTROL=n
@@ -141,7 +141,8 @@ CONFIG_SCHED_WAITPID=y
 CONFIG_SDCLONE_DISABLE=y
 CONFIG_SDMMC1_SDIO_MODE=y
 CONFIG_SDMMC1_SDIO_PULLUP=y
-CONFIG_SEM_PREALLOCHOLDERS=32
+CONFIG_SEM_NNESTPRIO=8
+CONFIG_SEM_PREALLOCHOLDERS=0
 CONFIG_SERIAL_IFLOWCONTROL_WATERMARKS=y
 CONFIG_SERIAL_TERMIOS=y
 CONFIG_SIG_DEFAULT=y
@@ -1,47 +0,0 @@
-CONFIG_BOARD_TOOLCHAIN="arm-none-eabi"
-CONFIG_BOARD_ARCHITECTURE="cortex-m4"
-CONFIG_BOARD_CONSTRAINED_FLASH=y
-CONFIG_BOARD_NO_HELP=y
-CONFIG_BOARD_CONSTRAINED_MEMORY=y
-CONFIG_BOARD_EXTERNAL_METADATA=y
-CONFIG_BOARD_SERIAL_GPS1="/dev/ttyS2"
-CONFIG_BOARD_SERIAL_TEL2="/dev/ttyS1"
-CONFIG_DRIVERS_ADC_BOARD_ADC=y
-CONFIG_DRIVERS_BAROMETER_BMP280=y
-CONFIG_DRIVERS_DSHOT=y
-CONFIG_DRIVERS_GPS=y
-CONFIG_DRIVERS_IMU_INVENSENSE_ICM20602=y
-CONFIG_DRIVERS_IMU_INVENSENSE_MPU6000=y
-CONFIG_DRIVERS_IMU_INVENSENSE_MPU9250=y
-CONFIG_DRIVERS_MAGNETOMETER_AKM_AK8963=y
-CONFIG_DRIVERS_MAGNETOMETER_HMC5883=y
-CONFIG_DRIVERS_OSD=y
-CONFIG_DRIVERS_PWM_OUT=y
-CONFIG_DRIVERS_RC_INPUT=y
-CONFIG_MODULES_ATTITUDE_ESTIMATOR_Q=y
-CONFIG_MODULES_BATTERY_STATUS=y
-CONFIG_MODULES_COMMANDER=y
-CONFIG_MODULES_CONTROL_ALLOCATOR=y
-CONFIG_MODULES_DATAMAN=y
-CONFIG_MODULES_EKF2=n
-CONFIG_MODULES_FLIGHT_MODE_MANAGER=y
-CONFIG_MODULES_LAND_DETECTOR=y
-CONFIG_MODULES_LOGGER=y
-CONFIG_MODULES_MANUAL_CONTROL=y
-CONFIG_MODULES_MAVLINK=y
-CONFIG_MODULES_MC_ATT_CONTROL=y
-CONFIG_MODULES_MC_HOVER_THRUST_ESTIMATOR=y
-CONFIG_MODULES_MC_POS_CONTROL=y
-CONFIG_MODULES_MC_RATE_CONTROL=y
-CONFIG_MODULES_NAVIGATOR=y
-CONFIG_MODULES_RC_UPDATE=y
-CONFIG_MODULES_SENSORS=y
-CONFIG_SYSTEMCMDS_DMESG=y
-CONFIG_SYSTEMCMDS_MFT=y
-CONFIG_SYSTEMCMDS_MIXER=y
-CONFIG_SYSTEMCMDS_MTD=y
-CONFIG_SYSTEMCMDS_NSHTERM=y
-CONFIG_SYSTEMCMDS_PARAM=y
-CONFIG_SYSTEMCMDS_PWM=y
-CONFIG_SYSTEMCMDS_REBOOT=y
-CONFIG_SYSTEMCMDS_VER=y
@@ -1,13 +0,0 @@
-{
-    "board_id": 42,
-    "magic": "MAMBAF405MK2",
-    "description": "Firmware for the MambaF405Mk2 board",
-    "image": "",
-    "build_time": 0,
-    "summary": "PX4/MambaF405",
-    "version": "0.1",
-    "image_size": 0,
-    "image_maxsize": 1032192,
-    "git_identity": "",
-    "board_revision": 0
-}
@@ -1,18 +0,0 @@
-#!/bin/sh
-#
-# board specific defaults
-#------------------------------------------------------------------------------
-
-# system_power unavailable
-param set-default CBRK_SUPPLY_CHK 894281
-
-# Disable safety switch by default
-param set-default CBRK_IO_SAFETY 22027
-
-# use the Q attitude estimator, it works w/o mag or GPS.
-param set-default SYS_MC_EST_GROUP 3
-param set-default ATT_ACC_COMP 0
-param set-default ATT_W_ACC 0.4000
-param set-default ATT_W_GYRO_BIAS 0.0000
-
-param set-default SYS_HAS_MAG 0
@@ -1,9 +0,0 @@
-#!/bin/sh
-#
-# Mamba F405 MK2 specific board extras init
-#------------------------------------------------------------------------------
-
-if ! param compare OSD_ATXXXX_CFG 0
-then
-	atxxxx start -s
-fi
@@ -1,25 +0,0 @@
-#!/bin/sh
-#
-# Mamba F405 MK2 specific board sensors init
-#------------------------------------------------------------------------------
-
-board_adc start
-
-if ! mpu6000 -R 6 -s start
-then
-	# some boards such as the Hobbywing XRotor F4 G2 use the ICM-20602
-	icm20602 -s -R 6 start
-fi
-
-if ! hmc5883 -T -X start
-then	
-	if mpu9250_i2c -X -b 2 -a 0x68 -R 28 start; then
-		sleep 1 # wait for mpu9250 to be configured with bypass enabled
-		ak8963 -X -b 2 -R 30 start # -R 34
-		sleep 1
-		mpu9250_i2c stop
-		ak8963 -X -b 2 -R 30 start # -R 34
-	fi
-fi
-
-bmp280 -X -b 2 start
@@ -1,327 +0,0 @@
-/************************************************************************************
- * nuttx-configs/diatone_mamba-f405-mk2/include/board.h
- * include/arch/board/board.h
- *
- *   Copyright (C) 2012 Gregory Nutt. All rights reserved.
- *   Author: Gregory Nutt <gnutt@nuttx.org>
- *
- *   Copyright (c) 2018 PX4 Development Team. All rights reserved.
- *   Author: Nathan Tsoi <nathan@vertile.com>
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- * 3. Neither the name NuttX nor the names of its contributors may be
- *    used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ************************************************************************************/
-
-#ifndef __CONFIG_MAMBAF405MK2_INCLUDE_BOARD_H
-#define __CONFIG_MAMBAF405MK2_INCLUDE_BOARD_H
-
-/************************************************************************************
- * Included Files
- ************************************************************************************/
-#include "board_dma_map.h"
-
-#include <nuttx/config.h>
-
-#ifndef __ASSEMBLY__
-# include <stdint.h>
-#endif
-
-#include "stm32_rcc.h"
-#include "stm32_sdio.h"
-#include "stm32.h"
-
-/************************************************************************************
- * Definitions
- ************************************************************************************/
-
-/* Clocking *************************************************************************/
-/* The mambaf405mk2 board features a single 8MHz crystal.  Space is provided
- * for a 32kHz RTC backup crystal, but it is not stuffed.
- *
- * This is the canonical configuration:
- *   System Clock source           : PLL (HSE)
- *   SYSCLK(Hz)                    : 168000000    Determined by PLL configuration
- *   HCLK(Hz)                      : 168000000    (STM32_RCC_CFGR_HPRE)
- *   AHB Prescaler                 : 1            (STM32_RCC_CFGR_HPRE)
- *   APB1 Prescaler                : 4            (STM32_RCC_CFGR_PPRE1)
- *   APB2 Prescaler                : 2            (STM32_RCC_CFGR_PPRE2)
- *   HSE Frequency(Hz)             : 8000000      (STM32_BOARD_XTAL)
- *   PLLM                          : 8            (STM32_PLLCFG_PLLM)
- *   PLLN                          : 336          (STM32_PLLCFG_PLLN)
- *   PLLP                          : 2            (STM32_PLLCFG_PLLP)
- *   PLLQ                          : 7            (STM32_PLLCFG_PLLQ)
- *   Main regulator output voltage : Scale1 mode  Needed for high speed SYSCLK
- *   Flash Latency(WS)             : 5
- *   Prefetch Buffer               : OFF
- *   Instruction cache             : ON
- *   Data cache                    : ON
- *   Require 48MHz for USB OTG FS, : Enabled
- *   SDIO and RNG clock
- */
-
-/* HSI - 16 MHz RC factory-trimmed
- * LSI - 32 KHz RC
- * HSE - On-board crystal frequency is 8MHz
- * LSE - 32.768 kHz
- */
-
-#define STM32_BOARD_XTAL        8000000ul
-
-#define STM32_HSI_FREQUENCY     16000000ul
-#define STM32_LSI_FREQUENCY     32000
-#define STM32_HSE_FREQUENCY     STM32_BOARD_XTAL
-#define STM32_LSE_FREQUENCY     32768
-
-/* Main PLL Configuration.
- *
- * PLL source is HSE
- * PLL_VCO = (STM32_HSE_FREQUENCY / PLLM) * PLLN
- *         = (8,000,000 / 8) * 336
- *         = 336,000,000
- * SYSCLK  = PLL_VCO / PLLP
- *         = 336,000,000 / 2 = 168,000,000
- * USB OTG FS, SDIO and RNG Clock
- *         =  PLL_VCO / PLLQ
- *         = 48,000,000
- */
-
-#define STM32_PLLCFG_PLLM       RCC_PLLCFG_PLLM(8)
-#define STM32_PLLCFG_PLLN       RCC_PLLCFG_PLLN(336)
-#define STM32_PLLCFG_PLLP       RCC_PLLCFG_PLLP_2
-#define STM32_PLLCFG_PLLQ       RCC_PLLCFG_PLLQ(7)
-
-#define STM32_SYSCLK_FREQUENCY  168000000ul
-
-/* AHB clock (HCLK) is SYSCLK (168MHz) */
-
-#define STM32_RCC_CFGR_HPRE     RCC_CFGR_HPRE_SYSCLK  /* HCLK  = SYSCLK / 1 */
-#define STM32_HCLK_FREQUENCY    STM32_SYSCLK_FREQUENCY
-#define STM32_BOARD_HCLK        STM32_HCLK_FREQUENCY  /* same as above, to satisfy compiler */
-
-/* APB1 clock (PCLK1) is HCLK/4 (42MHz) */
-
-#define STM32_RCC_CFGR_PPRE1    RCC_CFGR_PPRE1_HCLKd4     /* PCLK1 = HCLK / 4 */
-#define STM32_PCLK1_FREQUENCY   (STM32_HCLK_FREQUENCY/4)
-
-/* Timers driven from APB1 will be twice PCLK1 */
-
-#define STM32_APB1_TIM2_CLKIN   (2*STM32_PCLK1_FREQUENCY)
-#define STM32_APB1_TIM3_CLKIN   (2*STM32_PCLK1_FREQUENCY)
-#define STM32_APB1_TIM4_CLKIN   (2*STM32_PCLK1_FREQUENCY)
-#define STM32_APB1_TIM5_CLKIN   (2*STM32_PCLK1_FREQUENCY)
-#define STM32_APB1_TIM6_CLKIN   (2*STM32_PCLK1_FREQUENCY)
-#define STM32_APB1_TIM7_CLKIN   (2*STM32_PCLK1_FREQUENCY)
-#define STM32_APB1_TIM12_CLKIN  (2*STM32_PCLK1_FREQUENCY)
-#define STM32_APB1_TIM13_CLKIN  (2*STM32_PCLK1_FREQUENCY)
-#define STM32_APB1_TIM14_CLKIN  (2*STM32_PCLK1_FREQUENCY)
-
-/* APB2 clock (PCLK2) is HCLK/2 (84MHz) */
-
-#define STM32_RCC_CFGR_PPRE2    RCC_CFGR_PPRE2_HCLKd2     /* PCLK2 = HCLK / 2 */
-#define STM32_PCLK2_FREQUENCY   (STM32_HCLK_FREQUENCY/2)
-
-/* Timers driven from APB2 will be twice PCLK2 */
-
-#define STM32_APB2_TIM1_CLKIN   (2*STM32_PCLK2_FREQUENCY)
-#define STM32_APB2_TIM8_CLKIN   (2*STM32_PCLK2_FREQUENCY)
-#define STM32_APB2_TIM9_CLKIN   (2*STM32_PCLK2_FREQUENCY)
-#define STM32_APB2_TIM10_CLKIN  (2*STM32_PCLK2_FREQUENCY)
-#define STM32_APB2_TIM11_CLKIN  (2*STM32_PCLK2_FREQUENCY)
-
-/* Timer Frequencies, if APBx is set to 1, frequency is same to APBx
- * otherwise frequency is 2xAPBx.
- * Note: TIM1,8-11 are on APB2, others on APB1
- */
-
-#define BOARD_TIM1_FREQUENCY    STM32_APB2_TIM1_CLKIN
-#define BOARD_TIM2_FREQUENCY    STM32_APB1_TIM2_CLKIN
-#define BOARD_TIM3_FREQUENCY    STM32_APB1_TIM3_CLKIN
-#define BOARD_TIM4_FREQUENCY    STM32_APB1_TIM4_CLKIN
-#define BOARD_TIM5_FREQUENCY    STM32_APB1_TIM5_CLKIN
-#define BOARD_TIM6_FREQUENCY    STM32_APB1_TIM6_CLKIN
-#define BOARD_TIM7_FREQUENCY    STM32_APB1_TIM7_CLKIN
-#define BOARD_TIM8_FREQUENCY    STM32_APB2_TIM8_CLKIN
-#define BOARD_TIM9_FREQUENCY    STM32_APB2_TIM9_CLKIN
-#define BOARD_TIM10_FREQUENCY   STM32_APB2_TIM10_CLKIN
-#define BOARD_TIM11_FREQUENCY   STM32_APB2_TIM11_CLKIN
-#define BOARD_TIM12_FREQUENCY   STM32_APB1_TIM12_CLKIN
-#define BOARD_TIM13_FREQUENCY   STM32_APB1_TIM13_CLKIN
-#define BOARD_TIM14_FREQUENCY   STM32_APB1_TIM14_CLKIN
-
-/* SDIO dividers.  Note that slower clocking is required when DMA is disabled
- * in order to avoid RX overrun/TX underrun errors due to delayed responses
- * to service FIFOs in interrupt driven mode.  These values have not been
- * tuned!!!
- *
- * SDIOCLK=48MHz, SDIO_CK=SDIOCLK/(118+2)=400 KHz
- */
-
-#define SDIO_INIT_CLKDIV        (118 << SDIO_CLKCR_CLKDIV_SHIFT)
-
-/* DMA ON:  SDIOCLK=48MHz, SDIO_CK=SDIOCLK/(1+2)=16 MHz
- * DMA OFF: SDIOCLK=48MHz, SDIO_CK=SDIOCLK/(2+2)=12 MHz
- */
-
-#ifdef CONFIG_STM32_SDIO_DMA
-#  define SDIO_MMCXFR_CLKDIV    (1 << SDIO_CLKCR_CLKDIV_SHIFT)
-#else
-#  define SDIO_MMCXFR_CLKDIV    (2 << SDIO_CLKCR_CLKDIV_SHIFT)
-#endif
-
-/* DMA ON:  SDIOCLK=48MHz, SDIO_CK=SDIOCLK/(1+2)=16 MHz
- * DMA OFF: SDIOCLK=48MHz, SDIO_CK=SDIOCLK/(2+2)=12 MHz
- */
-
-#ifdef CONFIG_STM32_SDIO_DMA
-#  define SDIO_SDXFR_CLKDIV     (1 << SDIO_CLKCR_CLKDIV_SHIFT)
-#else
-#  define SDIO_SDXFR_CLKDIV     (2 << SDIO_CLKCR_CLKDIV_SHIFT)
-#endif
-
-/* LED definitions ******************************************************************/
-/* If CONFIG_ARCH_LEDS is not defined, then the user can control the LEDs in any
- * way.  The following definitions are used to access individual LEDs.
- */
-
-/* LED index values for use with stm32_setled() */
-
-#define BOARD_LED1        0
-//#define BOARD_LED2        1
-#define BOARD_NLEDS       1
-
-#define BOARD_LED_BLUE    BOARD_LED1
-//#define BOARD_LED_RED     BOARD_LED2
-
-/* LED bits for use with stm32_setleds() */
-
-#define BOARD_LED1_BIT    (1 << BOARD_LED1)
-#define BOARD_LED2_BIT    (1 << BOARD_LED2)
-
-/* If CONFIG_ARCH_LEDs is defined, then NuttX will control the 2 LEDs on board the
- * omnibusf4sd.  The following definitions describe how NuttX controls the LEDs:
- */
-
-#define LED_STARTED       0  /* LED1 */
-#define LED_HEAPALLOCATE  1  /* LED2 */
-#define LED_IRQSENABLED   2  /* LED1 */
-#define LED_STACKCREATED  3  /* LED1 + LED2 */
-#define LED_INIRQ         4  /* LED1 */
-#define LED_SIGNAL        5  /* LED2 */
-#define LED_ASSERTION     6  /* LED1 + LED2 */
-#define LED_PANIC         7  /* LED1 + LED2 */
-
-/* Alternate function pin selections ************************************************/
-
-/* UART1:
- *
- * PA10 (RX) and PA9 (TX) are broken out on J5
- */
-
-#define GPIO_USART1_RX GPIO_USART1_RX_1
-#define GPIO_USART1_TX GPIO_USART1_TX_1
-
-/* USART3:
- *
- * PC10 (TX) and PC11 (RX) are broken out on J4
- *
- * However, this port is shared with SPI3 which contains the BMP280 and MAX7456
- *
- * The Silkscreen pin labeled SCL is TX
- *                           MISO is RX
- */
-//#define GPIO_USART3_RX	GPIO_USART3_RX_2
-//#define GPIO_USART3_TX	GPIO_USART3_TX_2
-
-/* UART4:
- *
- * PA0 (TX) -- Labeled RSSI on the silkscreen is only broken out on a test pad
- *             on the pro version. It's on a 2.54mm header on other versions
- * PA1 (RX) -- Motor 5 out
- */
-#define GPIO_UART4_RX	GPIO_UART4_RX_1
-#define GPIO_UART4_TX	GPIO_UART4_TX_1
-
-/* UART6:
- *
- * PC6 (TX) and PC7 (RX) are broken out on J10
- */
-
-#define GPIO_USART6_RX GPIO_USART6_RX_1
-#define GPIO_USART6_TX GPIO_USART6_TX_1
-
-/* SPI1:
- *  MPU6000
- *  CS: PA4 -- configured in board_config.h
- *  CLK: PA5
- *  MISO: PA6
- *  MOSI: PA7
- */
-
-#define GPIO_SPI1_SCK  GPIO_SPI1_SCK_1
-#define GPIO_SPI1_MISO GPIO_SPI1_MISO_1
-#define GPIO_SPI1_MOSI GPIO_SPI1_MOSI_1
-
-/* SPI2:
- *  SD Card
- *  CS: PB12 -- configured in board_config.h
- *  CLK: PB13
- *  MISO: PB14
- *  MOSI: PB15
- */
-
-#define GPIO_SPI2_SCK	  GPIO_SPI2_SCK_2
-#define GPIO_SPI2_MISO	GPIO_SPI2_MISO_1
-#define GPIO_SPI2_MOSI	GPIO_SPI2_MOSI_1
-
-/* SPI3:
- *  BMP280
- *  CS: PB3 -- configured in board_config.h
- *  CLK: PC10
- *  MISO: PC11
- *  MOSI: PC12
- */
-
-#define GPIO_SPI3_SCK  GPIO_SPI3_SCK_2
-#define GPIO_SPI3_MISO GPIO_SPI3_MISO_2
-#define GPIO_SPI3_MOSI GPIO_SPI3_MOSI_2
-
-/*
- * I2C (external)
- *
- * SCL: PB10
- * SDA: PB11
- *
- * TODO:
- *   The optional _GPIO configurations allow the I2C driver to manually
- *   reset the bus to clear stuck slaves.  They match the pin configuration,
- *   but are normally-high GPIOs.
- */
-#define GPIO_I2C2_SCL		GPIO_I2C2_SCL_1
-#define GPIO_I2C2_SDA		GPIO_I2C2_SDA_1
-
-#endif  /* __CONFIG_OMNIBUSF4SD_INCLUDE_BOARD_H */
@@ -1,94 +0,0 @@
-/****************************************************************************
- *
- *   Copyright (c) 2020 PX4 Development Team. All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- * 3. Neither the name PX4 nor the names of its contributors may be
- *    used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ****************************************************************************/
-
-#pragma once
-
-/*
-|    DMA1    | Stream 0         | Stream 1         | Stream 2         | Stream 3         | Stream 4         | Stream 5         | Stream 6         | Stream 7         |
-|------------|------------------|------------------|------------------|------------------|------------------|------------------|------------------|------------------|
-| Channel 0  | SPI3_RX_1        | -                | SPI3_RX_2        | SPI2_RX          | SPI2_TX          | SPI3_TX_1        | -                | SPI3_TX_2        |
-| Channel 1  | I2C1_RX          | -                | TIM7_UP_1        |  -               | TIM7_UP_2        | I2C1_RX_1        | I2C1_TX          | I2C1_TX_1        |
-| Channel 2  | TIM4_CH1         | -                | I2C4_RX          | TIM4_CH2         | -                | I2C4_RX          | TIM4_UP          | TIM4_CH3         |
-| Channel 3  | -                | TIM2_UP_1        | I2C3_RX_1        | I2C2_EXT_RX      | I2C3_TX          | TIM2_CH1         | TIM2_CH2         | TIM2_UP_2        |
-|            |                  |   TIM2_CH3       |                  |                  |                  |                  |   TIM2_CH4_1     |   TIM2_CH4_2     |
-| Channel 4  | UART5_RX         | USART3_RX        | UART4_RX         | USART3_TX_1      | UART4_TX         | USART2_RX        | USART2_TX        | UART5_TX         |
-| Channel 5  | UART8_TX         | UART7_TX         | TIM3_CH4         | UART7_RX         | TIM3_CH1         | TIM3_CH2         | UART8_RX         | TIM3_CH3         |
-|            |                  |                  |   TIM3_UP        |                  |   TIM3_TRIG      |                  |                  |                  |
-| Channel 6  | TIM5_CH3         | TIM5_CH4_1       | TIM5_CH1         | TIM5_CH4_2       | TIM5_CH2         | -                | TIM5_UP_2        | -                |
-|            |   TIM5_UP_1      |   TIM5_TRIG_1    |                  |   TIM5_TRIG_2    |                  |                  |                  |                  |
-| Channel 7  | -                | TIM6_UP          | I2C2_RX          | I2C2_RX_1        | USART3_TX_2      | DAC1             | DAC2             | I2C2_TX          |
-|            |                  |                  |                  |                  |                  |                  |                  |                  |
-| Usage      |                  | TIM2_UP_1        | TIM3_UP          | SPI2_RX          | SPI2_TX          |                  |                  |                  |
-
-
-|    DMA2    | Stream 0         | Stream 1         | Stream 2         | Stream 3         | Stream 4         | Stream 5         | Stream 6         | Stream 7         |
-|------------|------------------|------------------|------------------|------------------|------------------|------------------|------------------|------------------|
-| Channel 0  | ADC1_1           | SAI1_A           | TIM8_CH1_1       | SAI1_A_1         | ADC1_2           | SAI1_B_1         | TIM1_CH1_1       | -                |
-|            |                  |                  |   TIM8_CH2_1     |                  |                  |                  |   TIM1_CH2_1     |                  |
-|            |                  |                  |   TIM8_CH3_1     |                  |                  |                  |   TIM1_CH3_1     |                  |
-| Channel 1  | -                | DCMI_1           | ADC2_1           | ADC2_2           | SAI1_B           | SPI6_TX          | SPI6_RX          | DCMI_2           |
-| Channel 2  | ADC3_1           | ADC3_2           | -                | SPI5_RX_1        | SPI5_TX_1        | CRYP_OUT         | CRYP_IN          | HASH_IN          |
-| Channel 3  | SPI1_RX_1        | -                | SPI1_RX_2        | SPI1_TX_1        | -                | SPI1_TX_2        | -                | QUADSPI          |
-| Channel 4  | SPI4_RX_1        | SPI4_TX_1        | USART1_RX_1      | SDIO             | -                | USART1_RX_2      | SDIO             | USART1_TX        |
-| Channel 5  | -                | USART6_RX_1      | USART6_RX_2      | SPI4_RX_2        | SPI4_TX_2        | -                | USART6_TX_1      | USART6_TX_2      |
-| Channel 6  | TIM1_TRIG_1      | TIM1_CH1_2       | TIM1_CH2_2       | TIM1_CH1         | TIM1_CH4         | TIM1_UP          | TIM1_CH3_2       | -                |
-|            |                  |                  |                  |                  |   TIM1_TRIG_2    |                  |                  |                  |
-|            |                  |                  |                  |                  |   TIM1_COM       |                  |                  |                  |
-| Channel 7  | -                | TIM8_UP          | TIM8_CH1_2       | TIM8_CH2_2       | TIM8_CH3_2       | SPI5_RX_2        | SPI5_TX_2        | TIM8_CH4         |
-|            |                  |                  |                  |                  |                  |                  |                  |   TIM8_TRIG      |
-|            |                  |                  |                  |                  |                  |                  |                  |   TIM8_COM       |
-|            |                  |                  |                  |                  |                  |                  |                  |                  |
-| Usage      | SPI1_RX_1        | USART6_RX_1      | USART1_RX_1      | SPI1_TX_1        |                  |                  | SDIO             |                  |
- */
-
-// DMA1 Channel/Stream Selections
-//--------------------------------------------//---------------------------//----------------
-//      AVAILABLE                             // DMA2, Stream 0
-//      DMAMAP_TIM2_UP                        // DMA1, Stream 1, Channel 3    (DSHOT)
-//      DMAMAP_TIM3_UP                        // DMA1, Stream 2, Channel 5    (DSHOT)
-#define DMACHAN_SPI2_RX    DMAMAP_SPI2_RX     // DMA1, Stream 3, Channel 0    (SPI2 RX)
-#define DMACHAN_SPI2_TX    DMAMAP_SPI2_TX     // DMA1, Stream 4, Channel 0    (SPI2 TX)
-//      AVAILABLE                             // DMA2, Stream 5
-//      AVAILABLE                             // DMA2, Stream 6
-//      AVAILABLE                             // DMA2, Stream 7
-
-//  DMA2 Channel/Stream Selections
-//--------------------------------------------//---------------------------//----------------
-#define DMACHAN_SPI1_RX    DMAMAP_SPI1_RX_1   // DMA2, Stream 0, Channel 3    (SPI1 RX)
-#define DMAMAP_USART6_RX   DMAMAP_USART6_RX_1 // DMA2, Stream 1, Channel 4
-#define DMAMAP_USART1_RX   DMAMAP_USART1_RX_1 // DMA2, Stream 2, Channel 4
-#define DMACHAN_SPI1_TX    DMAMAP_SPI1_TX_1   // DMA2, Stream 3, Channel 3    (SPI1 TX)
-//      AVAILABLE                             // DMA2, Stream 4
-//      AVAILABLE                             // DMA2, Stream 5
-#define DMAMAP_SDIO        DMAMAP_SDIO_2      // DMA2, Stream 6, Channel 4
-//      AVAILABLE                             // DMA2, Stream 7
@@ -1,192 +0,0 @@
-#
-# This file is autogenerated: PLEASE DO NOT EDIT IT.
-#
-# You can use "make menuconfig" to make any modifications to the installed .config file.
-# You can then do "make savedefconfig" to generate a new defconfig file that includes your
-# modifications.
-#
-# CONFIG_DEV_CONSOLE is not set
-# CONFIG_MMCSD_HAVE_CARDDETECT is not set
-# CONFIG_MMCSD_HAVE_WRITEPROTECT is not set
-# CONFIG_MMCSD_MMCSUPPORT is not set
-# CONFIG_SPI_CALLBACK is not set
-# CONFIG_STM32_CCMEXCLUDE is not set
-CONFIG_ARCH="arm"
-CONFIG_ARCH_BOARD_CUSTOM=y
-CONFIG_ARCH_BOARD_CUSTOM_DIR="../../../../boards/diatone/mamba-f405-mk2/nuttx-config"
-CONFIG_ARCH_BOARD_CUSTOM_DIR_RELPATH=y
-CONFIG_ARCH_BOARD_CUSTOM_NAME="px4"
-CONFIG_ARCH_CHIP="stm32"
-CONFIG_ARCH_CHIP_STM32=y
-CONFIG_ARCH_CHIP_STM32F405RG=y
-CONFIG_ARCH_INTERRUPTSTACK=512
-CONFIG_ARMV7M_MEMCPY=y
-CONFIG_ARMV7M_USEBASEPRI=y
-CONFIG_BOARDCTL_RESET=y
-CONFIG_BOARD_CRASHDUMP=y
-CONFIG_BOARD_CUSTOM_LEDS=y
-CONFIG_BOARD_LOOPSPERMSEC=16717
-CONFIG_BOARD_RESET_ON_ASSERT=2
-CONFIG_BUILTIN=y
-CONFIG_C99_BOOL8=y
-CONFIG_CDCACM=y
-CONFIG_CDCACM_IFLOWCONTROL=y
-CONFIG_CDCACM_PRODUCTID=0x0001
-CONFIG_CDCACM_PRODUCTSTR="DiatoneMambaF405 MK2"
-CONFIG_CDCACM_RXBUFSIZE=600
-CONFIG_CDCACM_TXBUFSIZE=2000
-CONFIG_CDCACM_VENDORID=0x26ac
-CONFIG_CDCACM_VENDORSTR="Diatone"
-CONFIG_DEBUG_SYMBOLS=y
-CONFIG_DEV_FIFO_SIZE=0
-CONFIG_DEV_PIPE_SIZE=70
-CONFIG_DISABLE_MQUEUE=y
-CONFIG_DISABLE_POSIX_TIMERS=y
-CONFIG_FAT_DMAMEMORY=y
-CONFIG_FAT_LCNAMES=y
-CONFIG_FAT_LFN=y
-CONFIG_FAT_LFN_ALIAS_HASH=y
-CONFIG_FDCLONE_STDIO=y
-CONFIG_FS_BINFS=y
-CONFIG_FS_CROMFS=y
-CONFIG_FS_FAT=y
-CONFIG_FS_FATTIME=y
-CONFIG_FS_PROCFS=y
-CONFIG_FS_PROCFS_REGISTER=y
-CONFIG_FS_ROMFS=y
-CONFIG_GRAN=y
-CONFIG_GRAN_INTR=y
-CONFIG_HAVE_CXX=y
-CONFIG_HAVE_CXXINITIALIZE=y
-CONFIG_I2C=y
-CONFIG_I2C_RESET=y
-CONFIG_IDLETHREAD_STACKSIZE=750
-CONFIG_LIBC_FLOATINGPOINT=y
-CONFIG_LIBC_STRERROR=y
-CONFIG_MEMSET_64BIT=y
-CONFIG_MEMSET_OPTSPEED=y
-CONFIG_MMCSD=y
-CONFIG_MM_REGIONS=2
-CONFIG_MTD=y
-CONFIG_MTD_BYTE_WRITE=y
-CONFIG_MTD_PARTITION=y
-CONFIG_MTD_PROGMEM=y
-CONFIG_MTD_W25=y
-CONFIG_NSH_ARCHINIT=y
-CONFIG_NSH_BUILTIN_APPS=y
-CONFIG_NSH_CROMFSETC=y
-CONFIG_NSH_DISABLE_BASENAME=y
-CONFIG_NSH_DISABLE_DD=y
-CONFIG_NSH_DISABLE_DIRNAME=y
-CONFIG_NSH_DISABLE_HEXDUMP=y
-CONFIG_NSH_DISABLE_IFCONFIG=y
-CONFIG_NSH_DISABLE_IFUPDOWN=y
-CONFIG_NSH_DISABLE_LOSETUP=y
-CONFIG_NSH_DISABLE_MKFIFO=y
-CONFIG_NSH_DISABLE_MKRD=y
-CONFIG_NSH_DISABLE_PUT=y
-CONFIG_NSH_DISABLE_REBOOT=y
-CONFIG_NSH_DISABLE_TELNETD=y
-CONFIG_NSH_DISABLE_UNAME=y
-CONFIG_NSH_DISABLE_WGET=y
-CONFIG_NSH_DISABLE_XD=y
-CONFIG_NSH_FATDEVNO=0
-CONFIG_NSH_FILEIOSIZE=512
-CONFIG_NSH_LINELEN=128
-CONFIG_NSH_MAXARGUMENTS=15
-CONFIG_NSH_MMCSDSPIPORTNO=2
-CONFIG_NSH_NESTDEPTH=8
-CONFIG_NSH_READLINE=y
-CONFIG_NSH_ROMFSETC=y
-CONFIG_NSH_ROMFSSECTSIZE=128
-CONFIG_NSH_STRERROR=y
-CONFIG_NSH_VARS=y
-CONFIG_PIPES=y
-CONFIG_PREALLOC_TIMERS=50
-CONFIG_PRIORITY_INHERITANCE=y
-CONFIG_PTHREAD_STACK_MIN=512
-CONFIG_RAM_SIZE=196608
-CONFIG_RAM_START=0x20000000
-CONFIG_RAW_BINARY=y
-CONFIG_RTC_DATETIME=y
-CONFIG_SCHED_ATEXIT=y
-CONFIG_SCHED_HPWORK=y
-CONFIG_SCHED_HPWORKPRIORITY=249
-CONFIG_SCHED_HPWORKSTACKSIZE=1280
-CONFIG_SCHED_INSTRUMENTATION=y
-CONFIG_SCHED_INSTRUMENTATION_EXTERNAL=y
-CONFIG_SCHED_LPWORK=y
-CONFIG_SCHED_LPWORKPRIORITY=50
-CONFIG_SCHED_LPWORKSTACKSIZE=1632
-CONFIG_SCHED_WAITPID=y
-CONFIG_SDCLONE_DISABLE=y
-CONFIG_SEM_PREALLOCHOLDERS=32
-CONFIG_SERIAL_TERMIOS=y
-CONFIG_SIG_DEFAULT=y
-CONFIG_SIG_SIGALRM_ACTION=y
-CONFIG_SIG_SIGUSR1_ACTION=y
-CONFIG_SIG_SIGUSR2_ACTION=y
-CONFIG_SIG_SIGWORK=4
-CONFIG_STACK_COLORATION=y
-CONFIG_START_DAY=30
-CONFIG_START_MONTH=11
-CONFIG_STDIO_BUFFER_SIZE=32
-CONFIG_STM32_ADC1=y
-CONFIG_STM32_BBSRAM=y
-CONFIG_STM32_BBSRAM_FILES=5
-CONFIG_STM32_BKPSRAM=y
-CONFIG_STM32_CCMDATARAM=y
-CONFIG_STM32_DISABLE_IDLE_SLEEP_DURING_DEBUG=y
-CONFIG_STM32_DMA1=y
-CONFIG_STM32_DMA2=y
-CONFIG_STM32_FLASH_PREFETCH=y
-CONFIG_STM32_FLOWCONTROL_BROKEN=y
-CONFIG_STM32_I2C2=y
-CONFIG_STM32_I2CTIMEOMS=10
-CONFIG_STM32_I2CTIMEOTICKS=10
-CONFIG_STM32_JTAG_SW_ENABLE=y
-CONFIG_STM32_OTGFS=y
-CONFIG_STM32_PWR=y
-CONFIG_STM32_RTC=y
-CONFIG_STM32_RTC_HSECLOCK=y
-CONFIG_STM32_RTC_MAGIC_REG=1
-CONFIG_STM32_SAVE_CRASHDUMP=y
-CONFIG_STM32_SDIO=y
-CONFIG_STM32_SDIO_CARD=y
-CONFIG_STM32_SERIALBRK_BSDCOMPAT=y
-CONFIG_STM32_SERIAL_DISABLE_REORDERING=y
-CONFIG_STM32_SPI1=y
-CONFIG_STM32_SPI1_DMA=y
-CONFIG_STM32_SPI1_DMA_BUFFER=512
-CONFIG_STM32_SPI2=y
-CONFIG_STM32_SPI2_DMA=y
-CONFIG_STM32_SPI3=y
-CONFIG_STM32_SPI_DMA=y
-CONFIG_STM32_SPI_DMATHRESHOLD=8
-CONFIG_STM32_TIM1=y
-CONFIG_STM32_TIM5=y
-CONFIG_STM32_UART4=y
-CONFIG_STM32_USART1=y
-CONFIG_STM32_USART6=y
-CONFIG_STM32_USART_BREAKS=y
-CONFIG_STM32_USART_SINGLEWIRE=y
-CONFIG_STM32_WWDG=y
-CONFIG_SYSTEM_CDCACM=y
-CONFIG_SYSTEM_NSH=y
-CONFIG_TASK_NAME_SIZE=24
-CONFIG_UART4_BAUD=57600
-CONFIG_UART4_RXBUFSIZE=300
-CONFIG_UART4_TXBUFSIZE=900
-CONFIG_USART1_RXBUFSIZE=300
-CONFIG_USART1_RXDMA=y
-CONFIG_USART1_TXBUFSIZE=300
-CONFIG_USART6_BAUD=57600
-CONFIG_USART6_RXBUFSIZE=300
-CONFIG_USART6_RXDMA=y
-CONFIG_USART6_TXBUFSIZE=300
-CONFIG_USBDEV=y
-CONFIG_USBDEV_BUSPOWERED=y
-CONFIG_USBDEV_MAXPOWER=500
-CONFIG_USEC_PER_TICK=1000
-CONFIG_USERMAIN_STACKSIZE=2944
-CONFIG_USER_ENTRYPOINT="nsh_main"
@@ -1,138 +0,0 @@
-/****************************************************************************
- * configs/omnibus-f4sd/scripts/ld.script
- *
- *   Copyright (C) 2011 Gregory Nutt. All rights reserved.
- *   Author: Gregory Nutt <gnutt@nuttx.org>
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- * 3. Neither the name NuttX nor the names of its contributors may be
- *    used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ****************************************************************************/
-
-/* The STM32F405RG has 1024Kb of FLASH beginning at address 0x0800:0000 and
- * 192Kb of SRAM. SRAM is split up into three blocks:
- *
- * 1) 112Kb of SRAM beginning at address 0x2000:0000
- * 2)  16Kb of SRAM beginning at address 0x2001:c000
- * 3)  64Kb of CCM SRAM beginning at address 0x1000:0000
- *
- * When booting from FLASH, FLASH memory is aliased to address 0x0000:0000
- * where the code expects to begin execution by jumping to the entry point in
- * the 0x0800:0000 address range.
- *
- * The first 16 KiB of flash is reserved for the bootloader.
- * Paramater storage will use the next 16KiB Sector.
- */
-
-MEMORY
-{
-    flash (rx)   : ORIGIN = 0x08008000, LENGTH = 992K
-    sram (rwx)   : ORIGIN = 0x20000000, LENGTH = 128K
-    ccsram (rwx) : ORIGIN = 0x10000000, LENGTH = 64K
-}
-
-OUTPUT_ARCH(arm)
-
-ENTRY(__start)		/* treat __start as the anchor for dead code stripping */
-EXTERN(_vectors)	/* force the vectors to be included in the output */
-
-/*
- * Ensure that abort() is present in the final object.  The exception handling
- * code pulled in by libgcc.a requires it (and that code cannot be easily avoided).
- */
-EXTERN(abort)
-
-SECTIONS
-{
-	.text : {
-		_stext = ABSOLUTE(.);
-		*(.vectors)
-		*(.text .text.*)
-		*(.fixup)
-		*(.gnu.warning)
-		*(.rodata .rodata.*)
-		*(.gnu.linkonce.t.*)
-		*(.got)
-		*(.gcc_except_table)
-		*(.gnu.linkonce.r.*)
-		_etext = ABSOLUTE(.);
-
-	} > flash
-
-	/*
-	 * Init functions (static constructors and the like)
-	 */
-        .init_section : {
-                _sinit = ABSOLUTE(.);
-                KEEP(*(.init_array .init_array.*))
-                _einit = ABSOLUTE(.);
-        } > flash
-
-
-	.ARM.extab : {
-		*(.ARM.extab*)
-	} > flash
-
-	__exidx_start = ABSOLUTE(.);
-	.ARM.exidx : {
-		*(.ARM.exidx*)
-	} > flash
-	__exidx_end = ABSOLUTE(.);
-
-	_eronly = ABSOLUTE(.);
-
-	.data : {
-		_sdata = ABSOLUTE(.);
-		*(.data .data.*)
-		*(.gnu.linkonce.d.*)
-		CONSTRUCTORS
-		_edata = ABSOLUTE(.);
-	} > sram AT > flash
-
-	.bss : {
-		_sbss = ABSOLUTE(.);
-		*(.bss .bss.*)
-		*(.gnu.linkonce.b.*)
-		*(COMMON)
-		. = ALIGN(4);
-		_ebss = ABSOLUTE(.);
-	} > sram
-
-	/* Stabs debugging sections. */
-	.stab 0 : { *(.stab) }
-	.stabstr 0 : { *(.stabstr) }
-	.stab.excl 0 : { *(.stab.excl) }
-	.stab.exclstr 0 : { *(.stab.exclstr) }
-	.stab.index 0 : { *(.stab.index) }
-	.stab.indexstr 0 : { *(.stab.indexstr) }
-	.comment 0 : { *(.comment) }
-	.debug_abbrev 0 : { *(.debug_abbrev) }
-	.debug_info 0 : { *(.debug_info) }
-	.debug_line 0 : { *(.debug_line) }
-	.debug_pubnames 0 : { *(.debug_pubnames) }
-	.debug_aranges 0 : { *(.debug_aranges) }
-}
@@ -1,204 +0,0 @@
-/****************************************************************************
- *
- *   Copyright (c) 2018, 2014 PX4 Development Team. All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- * 3. Neither the name PX4 nor the names of its contributors may be
- *    used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ****************************************************************************/
-
-/**
- * @file board_config.h
- *
- * boards internal definitions
- */
-
-#pragma once
-
-/****************************************************************************************************
- * Included Files
- ****************************************************************************************************/
-
-#include <px4_platform_common/px4_config.h>
-#include <nuttx/compiler.h>
-#include <stdint.h>
-
-/****************************************************************************************************
- * Definitions
- ****************************************************************************************************/
-/* Configuration ************************************************************************************/
-
-/* omnibusf4sd GPIOs ***********************************************************************************/
-/* LEDs */
-// power - green
-// LED1 - PB5 - blue
-#define GPIO_LED1       (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_50MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTB|GPIO_PIN5)
-#define GPIO_LED_BLUE   GPIO_LED1
-
-#define BOARD_OVERLOAD_LED     LED_BLUE
-
-#define  FLASH_BASED_PARAMS
-
-/*
- * ADC channels
- *
- * These are the channel numbers of the ADCs of the microcontroller that can be used by the Px4 Firmware in the adc driver
- */
-#define ADC_CHANNELS (1 << 0) | (1 << 11) | (1 << 12)
-
-#define ADC_BATTERY_VOLTAGE_CHANNEL  11
-#define ADC_BATTERY_CURRENT_CHANNEL  13
-#define ADC_RC_RSSI_CHANNEL          12
-
-/* Define Battery 1 Voltage Divider and A per V
- */
-#define BOARD_BATTERY1_V_DIV         (11.12f)
-#define BOARD_BATTERY1_A_PER_V       (31.f)
-
-/* User GPIOs
- *
- * GPIO0-5 are the PWM servo outputs.
- * GPIO_TIM3_CH3OUT        GPIO_TIM3_CH3OUT_1 //PB0 S1_OUT D1_ST7
- * GPIO_TIM3_CH4OUT        GPIO_TIM3_CH4OUT_1 //PB1 S2_OUT D1_ST2
- * GPIO_TIM2_CH4OUT        GPIO_TIM2_CH4OUT_1 //PA3 S3_OUT D1_ST6
- * GPIO_TIM2_CH3OUT        GPIO_TIM2_CH3OUT_1 //PA2 S4_OUT D1_ST1
- * GPIO_TIM5_CH2OUT        GPIO_TIM5_CH2OUT_1 //PA1 S5_OUT
- * GPIO_TIM1_CH1OUT        GPIO_TIM1_CH1OUT_1 //PA8 S6_OUT
- */
-
-#define _MK_GPIO_INPUT(def) (((def) & (GPIO_PORT_MASK | GPIO_PIN_MASK)) | (GPIO_INPUT|GPIO_PULLUP))
-
-#define GPIO_GPIO0_INPUT             _MK_GPIO_INPUT(GPIO_TIM3_CH3IN)
-#define GPIO_GPIO1_INPUT             _MK_GPIO_INPUT(GPIO_TIM3_CH4IN)
-#define GPIO_GPIO2_INPUT             _MK_GPIO_INPUT(GPIO_TIM2_CH3IN)
-#define GPIO_GPIO3_INPUT             _MK_GPIO_INPUT(GPIO_TIM2_CH4IN)
-//#define GPIO_GPIO4_INPUT             _MK_GPIO_INPUT(GPIO_TIM5_CH2IN)
-//#define GPIO_GPIO5_INPUT             _MK_GPIO_INPUT(GPIO_TIM1_CH1IN)
-
-#define _MK_GPIO_OUTPUT(def) (((def) & (GPIO_PORT_MASK | GPIO_PIN_MASK)) | (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR))
-
-#define GPIO_GPIO0_OUTPUT            _MK_GPIO_OUTPUT(GPIO_TIM3_CH3OUT)
-#define GPIO_GPIO1_OUTPUT            _MK_GPIO_OUTPUT(GPIO_TIM3_CH4OUT)
-#define GPIO_GPIO2_OUTPUT            _MK_GPIO_OUTPUT(GPIO_TIM2_CH3OUT)
-#define GPIO_GPIO3_OUTPUT            _MK_GPIO_OUTPUT(GPIO_TIM2_CH4OUT)
-//#define GPIO_GPIO4_OUTPUT            _MK_GPIO_OUTPUT(GPIO_TIM5_CH2OUT)
-//#define GPIO_GPIO5_OUTPUT            _MK_GPIO_OUTPUT(GPIO_TIM1_CH1OUT)
-
-/* USB OTG FS
- *
- * PA9  OTG_FS_VBUS VBUS sensing
- */
-#define GPIO_OTGFS_VBUS		(GPIO_INPUT|GPIO_FLOAT|GPIO_SPEED_100MHz|GPIO_OPENDRAIN|GPIO_PORTC|GPIO_PIN5)
-
-/* PWM
- *
- * Alternatively CH3/CH4 could be assigned to UART6_TX/RX
- */
-#define DIRECT_PWM_OUTPUT_CHANNELS      4
-#define DIRECT_INPUT_TIMER_CHANNELS  4
-
-// Has pwm outputs
-#define BOARD_HAS_PWM    DIRECT_PWM_OUTPUT_CHANNELS
-
-/* High-resolution timer */
-#define HRT_TIMER                    4 // T4C1
-#define HRT_TIMER_CHANNEL            1 // use capture/compare channel 1
-
-#define HRT_PPM_CHANNEL              3 // capture/compare channel 3
-#define GPIO_PPM_IN                  (GPIO_ALT|GPIO_AF2|GPIO_PULLUP|GPIO_PORTB|GPIO_PIN8)
-
-#define RC_SERIAL_PORT               "/dev/ttyS0"
-#define BOARD_SUPPORTS_RC_SERIAL_PORT_OUTPUT
-
-/*
- * One RC_IN
- *
- * GPIO PPM_IN on PB8 T4CH3
- * SPEKTRUM_RX (it's TX or RX in Bind) on PA10 UART1
- * The FMU can drive GPIO PPM_IN as an output
- */
-// TODO?
-//#define GPIO_PPM_IN_AS_OUT            (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_SET|GPIO_PORTC|GPIO_PIN6)
-//#define SPEKTRUM_RX_AS_GPIO_OUTPUT()  px4_arch_configgpio(GPIO_PPM_IN_AS_OUT)
-//#define SPEKTRUM_RX_AS_UART()         px4_arch_configgpio(GPIO_USART1_RX)
-//#define SPEKTRUM_OUT(_one_true)       px4_arch_gpiowrite(GPIO_PPM_IN_AS_OUT, (_one_true))
-
-#define BOARD_HAS_PWM    DIRECT_PWM_OUTPUT_CHANNELS
-
-/* This board provides a DMA pool and APIs */
-#define BOARD_DMA_ALLOC_POOL_SIZE 5120
-
-#define BOARD_HAS_ON_RESET 1
-
-#define BOARD_ENABLE_CONSOLE_BUFFER
-#define BOARD_CONSOLE_BUFFER_SIZE (1024*2)
-
-
-__BEGIN_DECLS
-
-/****************************************************************************************************
- * Public Types
- ****************************************************************************************************/
-
-/****************************************************************************************************
- * Public data
- ****************************************************************************************************/
-
-#ifndef __ASSEMBLY__
-
-/****************************************************************************************************
- * Public Functions
- ****************************************************************************************************/
-
-/****************************************************************************************************
- * Name: stm32_spiinitialize
- *
- * Description:
- *   Called to configure SPI chip select GPIO pins for the PX4FMU board.
- *
- ****************************************************************************************************/
-
-extern void stm32_spiinitialize(void);
-
-
-/****************************************************************************************************
- * Name: stm32_usbinitialize
- *
- * Description:
- *   Called to configure USB IO.
- *
- ****************************************************************************************************/
-
-extern void stm32_usbinitialize(void);
-
-extern void board_peripheral_reset(int ms);
-
-#include <px4_platform_common/board_common.h>
-
-#endif /* __ASSEMBLY__ */
-
-__END_DECLS
@@ -1,38 +0,0 @@
-/****************************************************************************
- *
- *   Copyright (C) 2020 PX4 Development Team. All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- * 3. Neither the name PX4 nor the names of its contributors may be
- *    used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ****************************************************************************/
-
-#include <px4_arch/i2c_hw_description.h>
-
-constexpr px4_i2c_bus_t px4_i2c_buses[I2C_BUS_MAX_BUS_ITEMS] = {
-	initI2CBusExternal(2),
-};
@@ -1,343 +0,0 @@
-/****************************************************************************
- *
- *   Copyright (c) 2012-2018 PX4 Development Team. All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- * 3. Neither the name PX4 nor the names of its contributors may be
- *    used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ****************************************************************************/
-
-/**
- * @file init.c
- *
- * mambaf405mk2-specific early startup code.  This file implements the
- * board_app_initialize() function that is called early by nsh during startup.
- *
- * Code here is run before the rcS script is invoked; it should start required
- * subsystems and perform board-specific initialization.
- */
-
-/****************************************************************************
- * Included Files
- ****************************************************************************/
-
-#include <px4_platform_common/px4_config.h>
-#include <px4_platform_common/tasks.h>
-
-#include <stdbool.h>
-#include <stdio.h>
-#include <string.h>
-#include <debug.h>
-#include <errno.h>
-#include <syslog.h>
-
-#include <nuttx/board.h>
-#include <nuttx/spi/spi.h>
-#include <nuttx/i2c/i2c_master.h>
-#include <nuttx/mmcsd.h>
-#include <nuttx/analog/adc.h>
-#include <nuttx/mm/gran.h>
-
-#include <stm32.h>
-#include "board_config.h"
-#include <stm32_uart.h>
-
-#include <arch/board/board.h>
-
-#include <drivers/drv_hrt.h>
-#include <drivers/drv_board_led.h>
-
-#include <systemlib/px4_macros.h>
-
-#include <px4_arch/io_timer.h>
-#include <px4_platform_common/init.h>
-#include <px4_platform/board_dma_alloc.h>
-
-# if defined(FLASH_BASED_PARAMS)
-#  include <parameters/flashparams/flashfs.h>
-#endif
-
-/****************************************************************************
- * Pre-Processor Definitions
- ****************************************************************************/
-
-/*
- * Ideally we'd be able to get these from arm_internal.h,
- * but since we want to be able to disable the NuttX use
- * of leds for system indication at will and there is no
- * separate switch, we need to build independent of the
- * CONFIG_ARCH_LEDS configuration switch.
- */
-__BEGIN_DECLS
-extern void led_init(void);
-extern void led_on(int led);
-extern void led_off(int led);
-__END_DECLS
-
-/****************************************************************************
- * Protected Functions
- ****************************************************************************/
-/****************************************************************************
- * Public Functions
- ****************************************************************************/
-/************************************************************************************
- * Name: board_peripheral_reset
- *
- * Description:
- *
- ************************************************************************************/
-__EXPORT void board_peripheral_reset(int ms)
-{
-	UNUSED(ms);
-}
-
-/************************************************************************************
- * Name: board_on_reset
- *
- * Description:
- * Optionally provided function called on entry to board_system_reset
- * It should perform any house keeping prior to the rest.
- *
- * status - 1 if resetting to boot loader
- *          0 if just resetting
- *
- ************************************************************************************/
-__EXPORT void board_on_reset(int status)
-{
-	/* configure the GPIO pins to outputs and keep them low */
-	for (int i = 0; i < DIRECT_PWM_OUTPUT_CHANNELS; ++i) {
-		px4_arch_configgpio(io_timer_channel_get_gpio_output(i));
-	}
-
-	/* On resets invoked from system (not boot) insure we establish a low
-	 * output state (discharge the pins) on PWM pins before they become inputs.
-	 */
-
-	if (status >= 0) {
-		up_mdelay(400);
-	}
-}
-
-/************************************************************************************
- * Name: stm32_boardinitialize
- *
- * Description:
- *   All STM32 architectures must provide the following entry point.  This entry point
- *   is called early in the initialization -- after all memory has been configured
- *   and mapped but before any devices have been initialized.
- *
- ************************************************************************************/
-
-__EXPORT void
-stm32_boardinitialize(void)
-{
-	/* Reset all PWM to Low outputs */
-
-	board_on_reset(-1);
-
-	/* configure LEDs */
-	board_autoled_initialize();
-
-
-	/* configure ADC pins */
-	stm32_configgpio(GPIO_ADC1_IN11);	/* BATT_VOLTAGE_SENS */
-	stm32_configgpio(GPIO_ADC1_IN13);	/* BATT_CURRENT_SENS */
-	stm32_configgpio(GPIO_ADC1_IN12);	/* RSSI analog in (TX of UART4 instead) */
-
-	// TODO: power peripherals
-	///* configure power supply control/sense pins */
-	//stm32_configgpio(GPIO_PERIPH_3V3_EN);
-	//stm32_configgpio(GPIO_VDD_BRICK_VALID);
-	//stm32_configgpio(GPIO_VDD_USB_VALID);
-
-	// TODO: 3v3 Sensor?
-	///* Start with Sensor voltage off We will enable it
-	// * in board_app_initialize
-	// */
-	//stm32_configgpio(GPIO_VDD_3V3_SENSORS_EN);
-
-	// TODO: SBUS inversion? SPEK power?
-	//stm32_configgpio(GPIO_SBUS_INV);
-	//stm32_configgpio(GPIO_SPEKTRUM_PWR_EN);
-
-	// TODO: $$$ Unused?
-	//stm32_configgpio(GPIO_8266_GPIO0);
-	//stm32_configgpio(GPIO_8266_PD);
-	//stm32_configgpio(GPIO_8266_RST);
-
-	/* Safety - led don in led driver */
-
-	// TODO: unused?
-	//stm32_configgpio(GPIO_BTN_SAFETY);
-
-	// TODO: RSSI
-	//stm32_configgpio(GPIO_RSSI_IN);
-
-	stm32_configgpio(GPIO_PPM_IN);
-
-	/* configure SPI all interfaces GPIO */
-
-	stm32_spiinitialize();
-
-}
-
-/****************************************************************************
- * Name: board_app_initialize
- *
- * Description:
- *   Perform application specific initialization.  This function is never
- *   called directly from application code, but only indirectly via the
- *   (non-standard) boardctl() interface using the command BOARDIOC_INIT.
- *
- * Input Parameters:
- *   arg - The boardctl() argument is passed to the board_app_initialize()
- *         implementation without modification.  The argument has no
- *         meaning to NuttX; the meaning of the argument is a contract
- *         between the board-specific initalization logic and the the
- *         matching application logic.  The value cold be such things as a
- *         mode enumeration value, a set of DIP switch switch settings, a
- *         pointer to configuration data read from a file or serial FLASH,
- *         or whatever you would like to do with it.  Every implementation
- *         should accept zero/NULL as a default configuration.
- *
- * Returned Value:
- *   Zero (OK) is returned on success; a negated errno value is returned on
- *   any failure to indicate the nature of the failure.
- *
- ****************************************************************************/
-
-static struct spi_dev_s *spi1;
-static struct spi_dev_s *spi2;
-static struct spi_dev_s *spi3;
-
-__EXPORT int board_app_initialize(uintptr_t arg)
-{
-	px4_platform_init();
-
-	/* configure the DMA allocator */
-
-	if (board_dma_alloc_init() < 0) {
-		syslog(LOG_ERR, "DMA alloc FAILED\n");
-	}
-
-#if defined(SERIAL_HAVE_RXDMA)
-	// set up the serial DMA polling at 1ms intervals for received bytes that have not triggered a DMA event.
-	static struct hrt_call serial_dma_call;
-	hrt_call_every(&serial_dma_call, 1000, 1000, (hrt_callout)stm32_serial_dma_poll, NULL);
-#endif
-
-	/* initial LED state */
-	drv_led_start();
-	led_off(LED_BLUE);
-
-	if (board_hardfault_init(2, true) != 0) {
-		led_on(LED_BLUE);
-	}
-
-
-	/* Configure SPI-based devices */
-
-	// SPI1: MPU6000
-	spi1 = stm32_spibus_initialize(1);
-
-	if (!spi1) {
-		syslog(LOG_ERR, "[boot] FAILED to initialize SPI port 1\n");
-		led_on(LED_BLUE);
-		return -ENODEV;
-	}
-
-	/* Default SPI1 to 1MHz and de-assert the known chip selects. */
-	SPI_SETFREQUENCY(spi1, 10000000);
-	SPI_SETBITS(spi1, 8);
-	SPI_SETMODE(spi1, SPIDEV_MODE3);
-	up_udelay(20);
-
-	// SPI2: SDCard
-	/* Get the SPI port for the microSD slot */
-	spi2 = stm32_spibus_initialize(CONFIG_NSH_MMCSDSPIPORTNO);
-
-	if (!spi2) {
-		syslog(LOG_ERR, "[boot] FAILED to initialize SPI port %d\n", CONFIG_NSH_MMCSDSPIPORTNO);
-		led_on(LED_BLUE);
-		return -ENODEV;
-	}
-
-	/* Now bind the SPI interface to the MMCSD driver */
-	int result = mmcsd_spislotinitialize(CONFIG_NSH_MMCSDMINOR, CONFIG_NSH_MMCSDSLOTNO, spi2);
-
-	if (result != OK) {
-		led_on(LED_BLUE);
-		syslog(LOG_ERR, "[boot] FAILED to bind SPI port 2 to the MMCSD driver\n");
-		return -ENODEV;
-	}
-
-	up_udelay(20);
-
-
-	// SPI3: OSD / Baro
-	spi3 = stm32_spibus_initialize(3);
-
-	if (!spi3) {
-		syslog(LOG_ERR, "[boot] FAILED to initialize SPI port 3\n");
-		led_on(LED_BLUE);
-		return -ENODEV;
-	}
-
-	/* Copied from fmu-v4
-	 * Default SPI3 to 12MHz and de-assert the known chip selects.
-	 * MS5611 has max SPI clock speed of 20MHz
-	 */
-
-	// BMP280 max SPI speed is 10 MHz
-	SPI_SETFREQUENCY(spi3, 10 * 1000 * 1000);
-	SPI_SETBITS(spi3, 8);
-	SPI_SETMODE(spi3, SPIDEV_MODE3);
-	up_udelay(20);
-
-#if defined(FLASH_BASED_PARAMS)
-	static sector_descriptor_t params_sector_map[] = {
-		{1, 16 * 1024, 0x08004000},
-		{0, 0, 0},
-	};
-
-	/* Initialize the flashfs layer to use heap allocated memory */
-	result = parameter_flashfs_init(params_sector_map, NULL, 0);
-
-	if (result != OK) {
-		syslog(LOG_ERR, "[boot] FAILED to init params in FLASH %d\n", result);
-		led_on(LED_AMBER);
-		return -ENODEV;
-	}
-
-#endif
-
-	/* Configure the HW based on the manifest */
-
-	px4_platform_configure();
-
-	return OK;
-}
@@ -1,120 +0,0 @@
-/****************************************************************************
- *
- *   Copyright (c) 2018 PX4 Development Team. All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- * 3. Neither the name PX4 nor the names of its contributors may be
- *    used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ****************************************************************************/
-
-/**
- * @file led.c
- *
- * omnibusf4sd LED backend.
- */
-
-#include <px4_platform_common/px4_config.h>
-
-#include <stdbool.h>
-
-#include "stm32.h"
-#include "board_config.h"
-
-#include <nuttx/board.h>
-
-/*
- * Ideally we'd be able to get these from arm_internal.h,
- * but since we want to be able to disable the NuttX use
- * of leds for system indication at will and there is no
- * separate switch, we need to build independent of the
- * CONFIG_ARCH_LEDS configuration switch.
- */
-__BEGIN_DECLS
-extern void led_init(void);
-extern void led_on(int led);
-extern void led_off(int led);
-extern void led_toggle(int led);
-__END_DECLS
-
-static uint32_t g_ledmap[] = {
-	GPIO_LED_BLUE,
-};
-
-__EXPORT void led_init(void)
-{
-	/* Configure LED GPIOs for output */
-	for (size_t l = 0; l < (sizeof(g_ledmap) / sizeof(g_ledmap[0])); l++) {
-		stm32_configgpio(g_ledmap[l]);
-	}
-}
-
-static void phy_set_led(int led, bool state)
-{
-	/* Pull Down to switch on */
-	if (led == 0) {
-		stm32_gpiowrite(g_ledmap[led], !state);
-	}
-}
-
-__EXPORT void led_on(int led)
-{
-	phy_set_led(led, true);
-}
-
-__EXPORT void led_off(int led)
-{
-	phy_set_led(led, false);
-}
-
-__EXPORT void led_toggle(int led)
-{
-	if (led == 0) {
-		phy_set_led(led, !stm32_gpioread(g_ledmap[led]));
-	}
-}
-
-__EXPORT void board_autoled_initialize(void)
-{
-	/* Configure LED1 GPIO for output */
-	stm32_configgpio(GPIO_LED1);
-}
-
-__EXPORT void board_autoled_on(int led)
-{
-	if (led == 1) {
-		/* Pull down to switch on */
-		stm32_gpiowrite(GPIO_LED1, false);
-	}
-}
-
-__EXPORT void board_autoled_off(int led)
-{
-	if (led == 1) {
-		/* Pull up to switch off */
-		stm32_gpiowrite(GPIO_LED1, true);
-	}
-}
@@ -1,51 +0,0 @@
-/****************************************************************************
- *
- *   Copyright (C) 2018 PX4 Development Team. All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- * 3. Neither the name PX4 nor the names of its contributors may be
- *    used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ****************************************************************************/
-
-#include <px4_arch/spi_hw_description.h>
-#include <drivers/drv_sensor.h>
-#include <nuttx/spi/spi.h>
-
-constexpr px4_spi_bus_t px4_spi_buses[SPI_BUS_MAX_BUS_ITEMS] = {
-	initSPIBus(SPI::Bus::SPI1, {
-		initSPIDevice(DRV_IMU_DEVTYPE_MPU6000, SPI::CS{GPIO::PortA, GPIO::Pin4}),
-		initSPIDevice(DRV_IMU_DEVTYPE_ICM20602, SPI::CS{GPIO::PortA, GPIO::Pin4}),
-	}),
-	initSPIBus(SPI::Bus::SPI2, {
-		initSPIDevice(DRV_OSD_DEVTYPE_ATXXXX, SPI::CS{GPIO::PortB, GPIO::Pin12}),
-	}),
-	initSPIBus(SPI::Bus::SPI3, {
-		initSPIDevice(SPIDEV_FLASH(0), SPI::CS{GPIO::PortB, GPIO::Pin3}),
-	}),
-};
-
-static constexpr bool unused = validateSPIConfig(px4_spi_buses);
@@ -1,49 +0,0 @@
-/****************************************************************************
- *
- *   Copyright (C) 2018 PX4 Development Team. All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- * 3. Neither the name PX4 nor the names of its contributors may be
- *    used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ****************************************************************************/
-
-#include <px4_arch/io_timer_hw_description.h>
-
-constexpr io_timers_t io_timers[MAX_IO_TIMERS] = {
-	initIOTimer(Timer::Timer3, DMA{DMA::Index1, DMA::Stream2, DMA::Channel5}),
-	initIOTimer(Timer::Timer2, DMA{DMA::Index1, DMA::Stream1, DMA::Channel3}),
-};
-
-constexpr timer_io_channels_t timer_io_channels[MAX_TIMER_IO_CHANNELS] = {
-	initIOTimerChannel(io_timers, {Timer::Timer3, Timer::Channel3}, {GPIO::PortB, GPIO::Pin0}),
-	initIOTimerChannel(io_timers, {Timer::Timer3, Timer::Channel4}, {GPIO::PortB, GPIO::Pin1}),
-	initIOTimerChannel(io_timers, {Timer::Timer2, Timer::Channel3}, {GPIO::PortA, GPIO::Pin2}),
-	initIOTimerChannel(io_timers, {Timer::Timer2, Timer::Channel4}, {GPIO::PortA, GPIO::Pin3}),
-};
-
-constexpr io_timers_channel_mapping_t io_timers_channel_mapping =
-	initIOTimerChannelMapping(io_timers, timer_io_channels);
@@ -1,107 +0,0 @@
-/****************************************************************************
- *
- *   Copyright (C) 2018 PX4 Development Team. All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- * 3. Neither the name PX4 nor the names of its contributors may be
- *    used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ****************************************************************************/
-
-/**
- * @file usb.c
- *
- * Board-specific USB functions.
- */
-
-/************************************************************************************
- * Included Files
- ************************************************************************************/
-
-#include <px4_platform_common/px4_config.h>
-
-#include <sys/types.h>
-#include <stdint.h>
-#include <stdbool.h>
-#include <debug.h>
-
-#include <nuttx/usb/usbdev.h>
-#include <nuttx/usb/usbdev_trace.h>
-
-#include <arm_arch.h>
-#include <stm32.h>
-#include "board_config.h"
-
-/************************************************************************************
- * Definitions
- ************************************************************************************/
-
-/************************************************************************************
- * Private Functions
- ************************************************************************************/
-
-/************************************************************************************
- * Public Functions
- ************************************************************************************/
-
-/************************************************************************************
- * Name: stm32_usbinitialize
- *
- * Description:
- *   Called to setup USB-related GPIO pins for the omnibusf4sd board.
- *
- ************************************************************************************/
-
-__EXPORT void stm32_usbinitialize(void)
-{
-	/* The OTG FS has an internal soft pull-up */
-
-	/* Configure the OTG FS VBUS sensing GPIO, Power On, and Overcurrent GPIOs */
-
-#ifdef CONFIG_STM32_OTGFS
-	stm32_configgpio(GPIO_OTGFS_VBUS);
-	/* XXX We only support device mode
-	stm32_configgpio(GPIO_OTGFS_PWRON);
-	stm32_configgpio(GPIO_OTGFS_OVER);
-	*/
-#endif
-}
-
-/************************************************************************************
- * Name:  stm32_usbsuspend
- *
- * Description:
- *   Board logic must provide the stm32_usbsuspend logic if the USBDEV driver is
- *   used.  This function is called whenever the USB enters or leaves suspend mode.
- *   This is an opportunity for the board logic to shutdown clocks, power, etc.
- *   while the USB is suspended.
- *
- ************************************************************************************/
-
-__EXPORT void stm32_usbsuspend(FAR struct usbdev_s *dev, bool resume)
-{
-	uinfo("resume: %d\n", resume);
-}
@@ -122,7 +122,8 @@ CONFIG_SCHED_LPWORK=y
 CONFIG_SCHED_LPWORKPRIORITY=50
 CONFIG_SCHED_LPWORKSTACKSIZE=1632
 CONFIG_SCHED_WAITPID=y
-CONFIG_SEM_PREALLOCHOLDERS=32
+CONFIG_SEM_NNESTPRIO=8
+CONFIG_SEM_PREALLOCHOLDERS=0
 CONFIG_SERIAL_TERMIOS=y
 CONFIG_SIG_DEFAULT=y
 CONFIG_SIG_SIGALRM_ACTION=y
@@ -108,7 +108,8 @@ CONFIG_SCHED_LPWORK=y
 CONFIG_SCHED_LPWORKPRIORITY=50
 CONFIG_SCHED_LPWORKSTACKSIZE=1632
 CONFIG_SCHED_WAITPID=y
-CONFIG_SEM_PREALLOCHOLDERS=32
+CONFIG_SEM_NNESTPRIO=8
+CONFIG_SEM_PREALLOCHOLDERS=0
 CONFIG_SERIAL_TERMIOS=y
 CONFIG_SIG_DEFAULT=y
 CONFIG_SIG_SIGALRM_ACTION=y
@@ -140,7 +140,8 @@ CONFIG_SCHED_LPWORKSTACKSIZE=1632
 CONFIG_SCHED_WAITPID=y
 CONFIG_SDCLONE_DISABLE=y
 CONFIG_SDMMC1_SDIO_PULLUP=y
-CONFIG_SEM_PREALLOCHOLDERS=32
+CONFIG_SEM_NNESTPRIO=8
+CONFIG_SEM_PREALLOCHOLDERS=0
 CONFIG_SERIAL_IFLOWCONTROL_WATERMARKS=y
 CONFIG_SERIAL_TERMIOS=y
 CONFIG_SIG_DEFAULT=y
@@ -109,17 +109,16 @@

 MEMORY
 {
-	ITCM_RAM  (rwx) : ORIGIN = 0x00000000, LENGTH =   64K
-	FLASH      (rx) : ORIGIN = 0x08020000, LENGTH = 1920K
-
-	DTCM1_RAM (rwx) : ORIGIN = 0x20000000, LENGTH =   64K
-	DTCM2_RAM (rwx) : ORIGIN = 0x20010000, LENGTH =   64K
-	AXI_SRAM  (rwx) : ORIGIN = 0x24000000, LENGTH =  512K /* D1 domain AXI bus */
-	SRAM1     (rwx) : ORIGIN = 0x30000000, LENGTH =  128K /* D2 domain AHB bus */
-	SRAM2     (rwx) : ORIGIN = 0x30020000, LENGTH =  128K /* D2 domain AHB bus */
-	SRAM3     (rwx) : ORIGIN = 0x30040000, LENGTH =   32K /* D2 domain AHB bus */
-	SRAM4     (rwx) : ORIGIN = 0x38000000, LENGTH =   64K /* D3 domain */
-	BKPRAM    (rwx) : ORIGIN = 0x38800000, LENGTH =    4K
+	itcm  (rwx) : ORIGIN = 0x00000000, LENGTH =   64K
+	flash (rx)  : ORIGIN = 0x08020000, LENGTH = 1920K
+	dtcm1 (rwx) : ORIGIN = 0x20000000, LENGTH =   64K
+	dtcm2 (rwx) : ORIGIN = 0x20010000, LENGTH =   64K
+	sram  (rwx) : ORIGIN = 0x24000000, LENGTH =  512K
+	sram1 (rwx) : ORIGIN = 0x30000000, LENGTH =  128K
+	sram2 (rwx) : ORIGIN = 0x30020000, LENGTH =  128K
+	sram3 (rwx) : ORIGIN = 0x30040000, LENGTH =   32K
+	sram4 (rwx) : ORIGIN = 0x38000000, LENGTH =   64K
+	bbram (rwx) : ORIGIN = 0x38800000, LENGTH =    4K
 }

 OUTPUT_ARCH(arm)
@@ -157,7 +156,7 @@ SECTIONS
 		*(.gnu.linkonce.r.*)
 		_etext = ABSOLUTE(.);

-	} > FLASH
+	} > flash

 	/*
 	 * Init functions (static constructors and the like)
@@ -166,17 +165,17 @@ SECTIONS
 		_sinit = ABSOLUTE(.);
 		KEEP(*(.init_array .init_array.*))
 		_einit = ABSOLUTE(.);
-	} > FLASH
+	} > flash


 	.ARM.extab : {
 		*(.ARM.extab*)
-	} > FLASH
+	} > flash

 	__exidx_start = ABSOLUTE(.);
 	.ARM.exidx : {
 		*(.ARM.exidx*)
-	} > FLASH
+	} > flash
 	__exidx_end = ABSOLUTE(.);

 	_eronly = ABSOLUTE(.);
@@ -187,12 +186,7 @@ SECTIONS
 		*(.gnu.linkonce.d.*)
 		CONSTRUCTORS
 		_edata = ABSOLUTE(.);
-
-		/* Pad out last section as the STM32H7 Flash write size is 256 bits. 32 bytes */
-		. = ALIGN(16);
-		FILL(0xffff)
-		. += 16;
-	} > AXI_SRAM AT > FLASH  = 0xffff
+	} > sram AT > flash

 	.bss : {
 		_sbss = ABSOLUTE(.);
@@ -201,7 +195,7 @@ SECTIONS
 		*(COMMON)
 		. = ALIGN(4);
 		_ebss = ABSOLUTE(.);
-	} > AXI_SRAM
+	} > sram

 	/* Emit the the D3 power domain section for locating BDMA data */

@@ -210,7 +204,7 @@ SECTIONS
 		*(.sram4)
 		. = ALIGN(4);
 		_sram4_heap_start = ABSOLUTE(.);
-	} > SRAM4
+	} > sram4

 	/* Stabs debugging sections. */
 	.stab 0 : { *(.stab) }
@@ -140,7 +140,8 @@ CONFIG_SCHED_LPWORKPRIORITY=50
 CONFIG_SCHED_LPWORKSTACKSIZE=1632
 CONFIG_SCHED_WAITPID=y
 CONFIG_SDCLONE_DISABLE=y
-CONFIG_SEM_PREALLOCHOLDERS=32
+CONFIG_SEM_NNESTPRIO=8
+CONFIG_SEM_PREALLOCHOLDERS=0
 CONFIG_SERIAL_TERMIOS=y
 CONFIG_SIG_DEFAULT=y
 CONFIG_SIG_SIGALRM_ACTION=y
@@ -139,7 +139,8 @@ CONFIG_SCHED_LPWORKPRIORITY=50
 CONFIG_SCHED_LPWORKSTACKSIZE=1632
 CONFIG_SCHED_WAITPID=y
 CONFIG_SDCLONE_DISABLE=y
-CONFIG_SEM_PREALLOCHOLDERS=32
+CONFIG_SEM_NNESTPRIO=8
+CONFIG_SEM_PREALLOCHOLDERS=0
 CONFIG_SERIAL_IFLOWCONTROL_WATERMARKS=y
 CONFIG_SERIAL_TERMIOS=y
 CONFIG_SIG_DEFAULT=y
@@ -109,17 +109,16 @@

 MEMORY
 {
-	ITCM_RAM  (rwx) : ORIGIN = 0x00000000, LENGTH =   64K
-	FLASH      (rx) : ORIGIN = 0x08020000, LENGTH = 1792K /* params in last sector */
-
-	DTCM1_RAM (rwx) : ORIGIN = 0x20000000, LENGTH =   64K
-	DTCM2_RAM (rwx) : ORIGIN = 0x20010000, LENGTH =   64K
-	AXI_SRAM  (rwx) : ORIGIN = 0x24000000, LENGTH =  512K /* D1 domain AXI bus */
-	SRAM1     (rwx) : ORIGIN = 0x30000000, LENGTH =  128K /* D2 domain AHB bus */
-	SRAM2     (rwx) : ORIGIN = 0x30020000, LENGTH =  128K /* D2 domain AHB bus */
-	SRAM3     (rwx) : ORIGIN = 0x30040000, LENGTH =   32K /* D2 domain AHB bus */
-	SRAM4     (rwx) : ORIGIN = 0x38000000, LENGTH =   64K /* D3 domain */
-	BKPRAM    (rwx) : ORIGIN = 0x38800000, LENGTH =    4K
+	itcm  (rwx) : ORIGIN = 0x00000000, LENGTH =   64K
+	flash (rx)  : ORIGIN = 0x08020000, LENGTH = 1792K /* params in last sector */
+	dtcm1 (rwx) : ORIGIN = 0x20000000, LENGTH =   64K
+	dtcm2 (rwx) : ORIGIN = 0x20010000, LENGTH =   64K
+	sram  (rwx) : ORIGIN = 0x24000000, LENGTH =  512K
+	sram1 (rwx) : ORIGIN = 0x30000000, LENGTH =  128K
+	sram2 (rwx) : ORIGIN = 0x30020000, LENGTH =  128K
+	sram3 (rwx) : ORIGIN = 0x30040000, LENGTH =   32K
+	sram4 (rwx) : ORIGIN = 0x38000000, LENGTH =   64K
+	bbram (rwx) : ORIGIN = 0x38800000, LENGTH =    4K
 }

 OUTPUT_ARCH(arm)
@@ -157,7 +156,7 @@ SECTIONS
 		*(.gnu.linkonce.r.*)
 		_etext = ABSOLUTE(.);

-	} > FLASH
+	} > flash

 	/*
 	 * Init functions (static constructors and the like)
@@ -166,17 +165,17 @@ SECTIONS
 		_sinit = ABSOLUTE(.);
 		KEEP(*(.init_array .init_array.*))
 		_einit = ABSOLUTE(.);
-	} > FLASH
+	} > flash


 	.ARM.extab : {
 		*(.ARM.extab*)
-	} > FLASH
+	} > flash

 	__exidx_start = ABSOLUTE(.);
 	.ARM.exidx : {
 		*(.ARM.exidx*)
-	} > FLASH
+	} > flash
 	__exidx_end = ABSOLUTE(.);

 	_eronly = ABSOLUTE(.);
@@ -187,12 +186,7 @@ SECTIONS
 		*(.gnu.linkonce.d.*)
 		CONSTRUCTORS
 		_edata = ABSOLUTE(.);
-
-		/* Pad out last section as the STM32H7 Flash write size is 256 bits. 32 bytes */
-		. = ALIGN(16);
-		FILL(0xffff)
-		. += 16;
-	} > AXI_SRAM AT > FLASH  = 0xffff
+	} > sram AT > flash

 	.bss : {
 		_sbss = ABSOLUTE(.);
@@ -201,7 +195,7 @@ SECTIONS
 		*(COMMON)
 		. = ALIGN(4);
 		_ebss = ABSOLUTE(.);
-	} > AXI_SRAM
+	} > sram

 	/* Emit the the D3 power domain section for locating BDMA data */

@@ -210,7 +204,7 @@ SECTIONS
 		*(.sram4)
 		. = ALIGN(4);
 		_sram4_heap_start = ABSOLUTE(.);
-	} > SRAM4
+	} > sram4

 	/* Stabs debugging sections. */
 	.stab 0 : { *(.stab) }
@@ -140,7 +140,8 @@ CONFIG_SCHED_WAITPID=y
 CONFIG_SDCLONE_DISABLE=y
 CONFIG_SDMMC1_SDIO_MODE=y
 CONFIG_SDMMC1_SDIO_PULLUP=y
-CONFIG_SEM_PREALLOCHOLDERS=32
+CONFIG_SEM_NNESTPRIO=8
+CONFIG_SEM_PREALLOCHOLDERS=0
 CONFIG_SERIAL_IFLOWCONTROL_WATERMARKS=y
 CONFIG_SERIAL_TERMIOS=y
 CONFIG_SIG_DEFAULT=y
@@ -126,7 +126,8 @@ CONFIG_SCHED_LPWORK=y
 CONFIG_SCHED_LPWORKPRIORITY=50
 CONFIG_SCHED_LPWORKSTACKSIZE=1632
 CONFIG_SCHED_WAITPID=y
-CONFIG_SEM_PREALLOCHOLDERS=32
+CONFIG_SEM_NNESTPRIO=8
+CONFIG_SEM_PREALLOCHOLDERS=0
 CONFIG_SERIAL_PASSTHRU_UBLOX=y
 CONFIG_SERIAL_TERMIOS=y
 CONFIG_SIG_DEFAULT=y
@@ -130,7 +130,8 @@ CONFIG_SCHED_LPWORKSTACKSIZE=1632
 CONFIG_SCHED_WAITPID=y
 CONFIG_SDCLONE_DISABLE=y
 CONFIG_SDMMC1_SDIO_PULLUP=y
-CONFIG_SEM_PREALLOCHOLDERS=32
+CONFIG_SEM_NNESTPRIO=8
+CONFIG_SEM_PREALLOCHOLDERS=0
 CONFIG_SERIAL_IFLOWCONTROL_WATERMARKS=y
 CONFIG_SERIAL_TERMIOS=y
 CONFIG_SIG_DEFAULT=y
@@ -34,7 +34,7 @@
 *
 ****************************************************************************/

-/* The board uses an STM32H743II and has 2048Kb of main FLASH memory.
+/* The Durandal-v1 uses an STM32H743II has 2048Kb of main FLASH memory.
 * The flash memory is partitioned into a User Flash memory and a System
 * Flash memory. Each of these memories has two banks:
 *
@@ -59,8 +59,8 @@
 *   2) BOOT=1: Boot address defined by user option byte BOOT_ADD1[15:0].
 *      ST programmed value: System bootloader at 0x1FF0:0000
 *
- * There's a switch on board, the BOOT0 pin is at ground so by default,
- * the STM32 will boot to address 0x0800:0000 in FLASH unless the switch is
+ * The Durandal has a Swtich on board, the BOOT0 pin is at ground so by default,
+ * the STM32 will boot to address 0x0800:0000 in FLASH unless the swiutch is
 * drepresed, then the boot will be from 0x1FF0:0000
 *
 * The STM32H743ZI also has 1024Kb of data SRAM.
@@ -109,17 +109,16 @@

 MEMORY
 {
-	ITCM_RAM  (rwx) : ORIGIN = 0x00000000, LENGTH =   64K
-	FLASH      (rx) : ORIGIN = 0x08020000, LENGTH = 1920K
-
-	DTCM1_RAM (rwx) : ORIGIN = 0x20000000, LENGTH =   64K
-	DTCM2_RAM (rwx) : ORIGIN = 0x20010000, LENGTH =   64K
-	AXI_SRAM  (rwx) : ORIGIN = 0x24000000, LENGTH =  512K /* D1 domain AXI bus */
-	SRAM1     (rwx) : ORIGIN = 0x30000000, LENGTH =  128K /* D2 domain AHB bus */
-	SRAM2     (rwx) : ORIGIN = 0x30020000, LENGTH =  128K /* D2 domain AHB bus */
-	SRAM3     (rwx) : ORIGIN = 0x30040000, LENGTH =   32K /* D2 domain AHB bus */
-	SRAM4     (rwx) : ORIGIN = 0x38000000, LENGTH =   64K /* D3 domain */
-	BKPRAM    (rwx) : ORIGIN = 0x38800000, LENGTH =    4K
+	itcm  (rwx) : ORIGIN = 0x00000000, LENGTH =   64K
+	flash (rx)  : ORIGIN = 0x08020000, LENGTH = 1920K
+	dtcm1 (rwx) : ORIGIN = 0x20000000, LENGTH =   64K
+	dtcm2 (rwx) : ORIGIN = 0x20010000, LENGTH =   64K
+	sram  (rwx) : ORIGIN = 0x24000000, LENGTH =  512K
+	sram1 (rwx) : ORIGIN = 0x30000000, LENGTH =  128K
+	sram2 (rwx) : ORIGIN = 0x30020000, LENGTH =  128K
+	sram3 (rwx) : ORIGIN = 0x30040000, LENGTH =   32K
+	sram4 (rwx) : ORIGIN = 0x38000000, LENGTH =   64K
+	bbram (rwx) : ORIGIN = 0x38800000, LENGTH =    4K
 }

 OUTPUT_ARCH(arm)
@@ -157,7 +156,7 @@ SECTIONS
 		*(.gnu.linkonce.r.*)
 		_etext = ABSOLUTE(.);

-	} > FLASH
+	} > flash

 	/*
 	 * Init functions (static constructors and the like)
@@ -166,17 +165,17 @@ SECTIONS
 		_sinit = ABSOLUTE(.);
 		KEEP(*(.init_array .init_array.*))
 		_einit = ABSOLUTE(.);
-	} > FLASH
+	} > flash


 	.ARM.extab : {
 		*(.ARM.extab*)
-	} > FLASH
+	} > flash

 	__exidx_start = ABSOLUTE(.);
 	.ARM.exidx : {
 		*(.ARM.exidx*)
-	} > FLASH
+	} > flash
 	__exidx_end = ABSOLUTE(.);

 	_eronly = ABSOLUTE(.);
@@ -187,12 +186,7 @@ SECTIONS
 		*(.gnu.linkonce.d.*)
 		CONSTRUCTORS
 		_edata = ABSOLUTE(.);
-
-		/* Pad out last section as the STM32H7 Flash write size is 256 bits. 32 bytes */
-		. = ALIGN(16);
-		FILL(0xffff)
-		. += 16;
-	} > AXI_SRAM AT > FLASH  = 0xffff
+	} > sram AT > flash

 	.bss : {
 		_sbss = ABSOLUTE(.);
@@ -201,7 +195,7 @@ SECTIONS
 		*(COMMON)
 		. = ALIGN(4);
 		_ebss = ABSOLUTE(.);
-	} > AXI_SRAM
+	} > sram

 	/* Emit the the D3 power domain section for locating BDMA data */

@@ -210,7 +204,7 @@ SECTIONS
 		*(.sram4)
 		. = ALIGN(4);
 		_sram4_heap_start = ABSOLUTE(.);
-	} > SRAM4
+	} > sram4

 	/* Stabs debugging sections. */
 	.stab 0 : { *(.stab) }
@@ -138,7 +138,8 @@ CONFIG_SCHED_LPWORKSTACKSIZE=1632
 CONFIG_SCHED_WAITPID=y
 CONFIG_SDCLONE_DISABLE=y
 CONFIG_SDMMC2_SDIO_PULLUP=y
-CONFIG_SEM_PREALLOCHOLDERS=32
+CONFIG_SEM_NNESTPRIO=8
+CONFIG_SEM_PREALLOCHOLDERS=0
 CONFIG_SERIAL_IFLOWCONTROL_WATERMARKS=y
 CONFIG_SERIAL_TERMIOS=y
 CONFIG_SIG_DEFAULT=y
@@ -140,7 +140,8 @@ CONFIG_SCHED_LPWORKSTACKSIZE=1632
 CONFIG_SCHED_WAITPID=y
 CONFIG_SDCLONE_DISABLE=y
 CONFIG_SDMMC2_SDIO_PULLUP=y
-CONFIG_SEM_PREALLOCHOLDERS=32
+CONFIG_SEM_NNESTPRIO=8
+CONFIG_SEM_PREALLOCHOLDERS=0
 CONFIG_SERIAL_IFLOWCONTROL_WATERMARKS=y
 CONFIG_SERIAL_TERMIOS=y
 CONFIG_SIG_DEFAULT=y
@@ -109,17 +109,16 @@

 MEMORY
 {
-	ITCM_RAM  (rwx) : ORIGIN = 0x00000000, LENGTH =   64K
-	FLASH      (rx) : ORIGIN = 0x08020000, LENGTH = 1920K
-
-	DTCM1_RAM (rwx) : ORIGIN = 0x20000000, LENGTH =   64K
-	DTCM2_RAM (rwx) : ORIGIN = 0x20010000, LENGTH =   64K
-	AXI_SRAM  (rwx) : ORIGIN = 0x24000000, LENGTH =  512K /* D1 domain AXI bus */
-	SRAM1     (rwx) : ORIGIN = 0x30000000, LENGTH =  128K /* D2 domain AHB bus */
-	SRAM2     (rwx) : ORIGIN = 0x30020000, LENGTH =  128K /* D2 domain AHB bus */
-	SRAM3     (rwx) : ORIGIN = 0x30040000, LENGTH =   32K /* D2 domain AHB bus */
-	SRAM4     (rwx) : ORIGIN = 0x38000000, LENGTH =   64K /* D3 domain */
-	BKPRAM    (rwx) : ORIGIN = 0x38800000, LENGTH =    4K
+	itcm  (rwx) : ORIGIN = 0x00000000, LENGTH =   64K
+	flash (rx)  : ORIGIN = 0x08020000, LENGTH = 1920K
+	dtcm1 (rwx) : ORIGIN = 0x20000000, LENGTH =   64K
+	dtcm2 (rwx) : ORIGIN = 0x20010000, LENGTH =   64K
+	sram  (rwx) : ORIGIN = 0x24000000, LENGTH =  512K
+	sram1 (rwx) : ORIGIN = 0x30000000, LENGTH =  128K
+	sram2 (rwx) : ORIGIN = 0x30020000, LENGTH =  128K
+	sram3 (rwx) : ORIGIN = 0x30040000, LENGTH =   32K
+	sram4 (rwx) : ORIGIN = 0x38000000, LENGTH =   64K
+	bbram (rwx) : ORIGIN = 0x38800000, LENGTH =    4K
 }

 OUTPUT_ARCH(arm)
@@ -158,7 +157,7 @@ SECTIONS
 		*(.gnu.linkonce.r.*)
 		_etext = ABSOLUTE(.);

-	} > FLASH
+	} > flash

 	/*
 	 * Init functions (static constructors and the like)
@@ -167,17 +166,17 @@ SECTIONS
 		_sinit = ABSOLUTE(.);
 		KEEP(*(.init_array .init_array.*))
 		_einit = ABSOLUTE(.);
-	} > FLASH
+	} > flash


 	.ARM.extab : {
 		*(.ARM.extab*)
-	} > FLASH
+	} > flash

 	__exidx_start = ABSOLUTE(.);
 	.ARM.exidx : {
 		*(.ARM.exidx*)
-	} > FLASH
+	} > flash
 	__exidx_end = ABSOLUTE(.);

 	_eronly = ABSOLUTE(.);
@@ -188,12 +187,7 @@ SECTIONS
 		*(.gnu.linkonce.d.*)
 		CONSTRUCTORS
 		_edata = ABSOLUTE(.);
-
-		/* Pad out last section as the STM32H7 Flash write size is 256 bits. 32 bytes */
-		. = ALIGN(16);
-		FILL(0xffff)
-		. += 16;
-	} > AXI_SRAM AT > FLASH  = 0xffff
+	} > sram AT > flash

 	.bss : {
 		_sbss = ABSOLUTE(.);
@@ -202,7 +196,7 @@ SECTIONS
 		*(COMMON)
 		. = ALIGN(4);
 		_ebss = ABSOLUTE(.);
-	} > AXI_SRAM
+	} > sram

 	/* Emit the the D3 power domain section for locating BDMA data */

@@ -211,7 +205,7 @@ SECTIONS
 		*(.sram4)
 		. = ALIGN(4);
 		_sram4_heap_start = ABSOLUTE(.);
-	} > SRAM4
+	} > sram4

 	/* Stabs debugging sections. */
 	.stab 0 : { *(.stab) }
@@ -1,3 +0,0 @@
-CONFIG_BOARD_TOOLCHAIN="arm-none-eabi"
-CONFIG_BOARD_ARCHITECTURE="cortex-m7"
-CONFIG_BOARD_ROMFSROOT=""
@@ -1,107 +0,0 @@
-CONFIG_BOARD_TOOLCHAIN="arm-none-eabi"
-CONFIG_BOARD_ARCHITECTURE="cortex-m7"
-CONFIG_BOARD_SERIAL_GPS1="/dev/ttyS2"
-CONFIG_BOARD_SERIAL_TEL1="/dev/ttyS0"
-CONFIG_BOARD_SERIAL_TEL2="/dev/ttyS1"
-CONFIG_BOARD_SERIAL_TEL3="/dev/ttyS4"
-CONFIG_DRIVERS_ADC_ADS1115=y
-CONFIG_DRIVERS_ADC_BOARD_ADC=y
-CONFIG_DRIVERS_BAROMETER_DPS310=y
-CONFIG_DRIVERS_BATT_SMBUS=y
-CONFIG_DRIVERS_CAMERA_CAPTURE=y
-CONFIG_DRIVERS_CAMERA_TRIGGER=y
-CONFIG_COMMON_DIFFERENTIAL_PRESSURE=y
-CONFIG_COMMON_DISTANCE_SENSOR=y
-CONFIG_DRIVERS_DSHOT=y
-CONFIG_DRIVERS_GPS=y
-CONFIG_DRIVERS_IMU_BOSCH_BMI088=y
-CONFIG_DRIVERS_IMU_INVENSENSE_ICM20602=y
-CONFIG_DRIVERS_IMU_INVENSENSE_ICM20948=y
-CONFIG_DRIVERS_IRLOCK=y
-CONFIG_COMMON_LIGHT=y
-CONFIG_COMMON_MAGNETOMETER=y
-CONFIG_COMMON_OPTICAL_FLOW=y
-CONFIG_DRIVERS_OSD=y
-CONFIG_DRIVERS_PCA9685=y
-CONFIG_DRIVERS_PCA9685_PWM_OUT=y
-CONFIG_DRIVERS_POWER_MONITOR_INA226=y
-CONFIG_DRIVERS_PWM_OUT=y
-CONFIG_DRIVERS_PWM_OUT_SIM=y
-CONFIG_DRIVERS_RC_INPUT=y
-CONFIG_DRIVERS_ROBOCLAW=y
-CONFIG_DRIVERS_RPM=y
-CONFIG_DRIVERS_SMART_BATTERY_BATMON=y
-CONFIG_COMMON_TELEMETRY=y
-CONFIG_DRIVERS_TONE_ALARM=y
-CONFIG_DRIVERS_UAVCAN=y
-CONFIG_MODULES_AIRSPEED_SELECTOR=y
-CONFIG_MODULES_ATTITUDE_ESTIMATOR_Q=y
-CONFIG_MODULES_BATTERY_STATUS=y
-CONFIG_MODULES_CAMERA_FEEDBACK=y
-CONFIG_MODULES_COMMANDER=y
-CONFIG_MODULES_DATAMAN=y
-CONFIG_MODULES_EKF2=y
-CONFIG_MODULES_ESC_BATTERY=y
-CONFIG_MODULES_EVENTS=y
-CONFIG_MODULES_FLIGHT_MODE_MANAGER=y
-CONFIG_MODULES_FW_ATT_CONTROL=y
-CONFIG_MODULES_FW_AUTOTUNE_ATTITUDE_CONTROL=y
-CONFIG_MODULES_FW_POS_CONTROL_L1=y
-CONFIG_MODULES_GYRO_CALIBRATION=y
-CONFIG_MODULES_GYRO_FFT=y
-CONFIG_MODULES_LAND_DETECTOR=y
-CONFIG_MODULES_LANDING_TARGET_ESTIMATOR=y
-CONFIG_MODULES_LOAD_MON=y
-CONFIG_MODULES_LOCAL_POSITION_ESTIMATOR=y
-CONFIG_MODULES_LOGGER=y
-CONFIG_MODULES_MAG_BIAS_ESTIMATOR=y
-CONFIG_MODULES_MAVLINK=y
-CONFIG_MODULES_MANUAL_CONTROL=y
-CONFIG_MODULES_MC_ATT_CONTROL=y
-CONFIG_MODULES_MC_AUTOTUNE_ATTITUDE_CONTROL=y
-CONFIG_MODULES_MC_HOVER_THRUST_ESTIMATOR=y
-CONFIG_MODULES_MC_POS_CONTROL=y
-CONFIG_MODULES_MC_RATE_CONTROL=y
-CONFIG_MODULES_CONTROL_ALLOCATOR=y
-CONFIG_MODULES_NAVIGATOR=y
-CONFIG_MODULES_RC_UPDATE=y
-CONFIG_MODULES_ROVER_POS_CONTROL=y
-CONFIG_MODULES_SENSORS=y
-CONFIG_MODULES_SIH=y
-CONFIG_MODULES_TEMPERATURE_COMPENSATION=y
-CONFIG_MODULES_UUV_ATT_CONTROL=y
-CONFIG_MODULES_UUV_POS_CONTROL=y
-CONFIG_MODULES_VMOUNT=y
-CONFIG_MODULES_VTOL_ATT_CONTROL=y
-CONFIG_SYSTEMCMDS_BL_UPDATE=y
-CONFIG_SYSTEMCMDS_ACTUATOR_TEST=y
-CONFIG_SYSTEMCMDS_DMESG=y
-CONFIG_SYSTEMCMDS_DUMPFILE=y
-CONFIG_SYSTEMCMDS_ESC_CALIB=y
-CONFIG_SYSTEMCMDS_GPIO=y
-CONFIG_SYSTEMCMDS_HARDFAULT_LOG=y
-CONFIG_SYSTEMCMDS_I2CDETECT=y
-CONFIG_SYSTEMCMDS_LED_CONTROL=y
-CONFIG_SYSTEMCMDS_MFT=y
-CONFIG_SYSTEMCMDS_MIXER=y
-CONFIG_SYSTEMCMDS_MOTOR_RAMP=y
-CONFIG_SYSTEMCMDS_MOTOR_TEST=y
-CONFIG_SYSTEMCMDS_MTD=y
-CONFIG_SYSTEMCMDS_NSHTERM=y
-CONFIG_SYSTEMCMDS_PARAM=y
-CONFIG_SYSTEMCMDS_PERF=y
-CONFIG_SYSTEMCMDS_PWM=y
-CONFIG_SYSTEMCMDS_REBOOT=y
-CONFIG_SYSTEMCMDS_REFLECT=y
-CONFIG_SYSTEMCMDS_SD_BENCH=y
-CONFIG_SYSTEMCMDS_SD_STRESS=y
-CONFIG_SYSTEMCMDS_SERIAL_TEST=y
-CONFIG_SYSTEMCMDS_SYSTEM_TIME=y
-CONFIG_SYSTEMCMDS_TOP=y
-CONFIG_SYSTEMCMDS_TOPIC_LISTENER=y
-CONFIG_SYSTEMCMDS_TUNE_CONTROL=y
-CONFIG_SYSTEMCMDS_UORB=y
-CONFIG_SYSTEMCMDS_USB_CONNECTED=y
-CONFIG_SYSTEMCMDS_VER=y
-CONFIG_SYSTEMCMDS_WORK_QUEUE=y
-CONFIG_EXAMPLES_FAKE_GPS=y
@@ -1,13 +0,0 @@
-{
-    "board_id": 1022,
-    "magic": "mRo-ctrl-zero-classic",
-    "description": "Firmware for the mRo-ctrl-zero-classic board",
-    "image": "",
-    "build_time": 0,
-    "summary": "mRo-ctrl-zero-classic",
-    "version": "0.1",
-    "image_size": 0,
-    "image_maxsize": 1966080,
-    "git_identity": "",
-    "board_revision": 0
-}
@@ -1,10 +0,0 @@
-#!/bin/sh
-#
-# board specific defaults
-#------------------------------------------------------------------------------
-
-param set-default BAT1_V_DIV 10.1
-param set-default BAT1_A_PER_V 24
-
-
-safety_button start
@@ -1,18 +0,0 @@
-#!/bin/sh
-#
-# board specific sensors init
-#------------------------------------------------------------------------------
-board_adc start
-
-# Internal ICM-20602
-icm20602 -s -b 1 -R 8 start
-
-# Internal SPI bus BMI088 accel & gyro
-bmi088 -A -s -b 5 -R 8 start
-bmi088 -G -s -b 5 -R 8 start
-
-# Internal ICM-20948 (with magnetometer)
-icm20948 -s -b 1 -R 8 -M start
-
-# Interal DPS310 (barometer)
-dps310 -s -b 2 start
@@ -1,93 +0,0 @@
-#
-# This file is autogenerated: PLEASE DO NOT EDIT IT.
-#
-# You can use "make menuconfig" to make any modifications to the installed .config file.
-# You can then do "make savedefconfig" to generate a new defconfig file that includes your
-# modifications.
-#
-# CONFIG_DEV_CONSOLE is not set
-# CONFIG_DISABLE_PSEUDOFS_OPERATIONS is not set
-# CONFIG_SPI_EXCHANGE is not set
-# CONFIG_STM32H7_SYSCFG is not set
-CONFIG_ARCH="arm"
-CONFIG_ARCH_BOARD_CUSTOM=y
-CONFIG_ARCH_BOARD_CUSTOM_DIR="../../../../boards/mro/ctrl-zero-classic/nuttx-config"
-CONFIG_ARCH_BOARD_CUSTOM_DIR_RELPATH=y
-CONFIG_ARCH_BOARD_CUSTOM_NAME="px4"
-CONFIG_ARCH_CHIP="stm32h7"
-CONFIG_ARCH_CHIP_STM32H743ZIT6=y
-CONFIG_ARCH_CHIP_STM32H7=y
-CONFIG_ARCH_INTERRUPTSTACK=512
-CONFIG_ARMV7M_BASEPRI_WAR=y
-CONFIG_ARMV7M_ICACHE=y
-CONFIG_ARMV7M_MEMCPY=y
-CONFIG_ARMV7M_USEBASEPRI=y
-CONFIG_BOARDCTL_RESET=y
-CONFIG_BOARD_INITTHREAD_PRIORITY=254
-CONFIG_BOARD_LATE_INITIALIZE=y
-CONFIG_BOARD_LOOPSPERMSEC=95150
-CONFIG_BOARD_RESET_ON_ASSERT=2
-CONFIG_C99_BOOL8=y
-CONFIG_CDCACM=y
-CONFIG_CDCACM_PRODUCTID=0x1022
-CONFIG_CDCACM_PRODUCTSTR="PX4 BL mRo ControlZero Classic"
-CONFIG_CDCACM_RXBUFSIZE=600
-CONFIG_CDCACM_TXBUFSIZE=12000
-CONFIG_CDCACM_VENDORID=0x26ac
-CONFIG_CDCACM_VENDORSTR="mRo"
-CONFIG_CLOCK_MONOTONIC=y
-CONFIG_DEBUG_FULLOPT=y
-CONFIG_DEBUG_SYMBOLS=y
-CONFIG_DEFAULT_SMALL=y
-CONFIG_DISABLE_MQUEUE=y
-CONFIG_DISABLE_PTHREAD=y
-CONFIG_EXPERIMENTAL=y
-CONFIG_FDCLONE_DISABLE=y
-CONFIG_FDCLONE_STDIO=y
-CONFIG_HAVE_CXX=y
-CONFIG_HAVE_CXXINITIALIZE=y
-CONFIG_IDLETHREAD_STACKSIZE=750
-CONFIG_LIBC_FLOATINGPOINT=y
-CONFIG_LIBC_LONG_LONG=y
-CONFIG_LIBC_STRERROR=y
-CONFIG_LIB_BOARDCTL=y
-CONFIG_FS_PROCFS_MAX_TASKS=8
-CONFIG_MEMSET_64BIT=y
-CONFIG_MEMSET_OPTSPEED=y
-CONFIG_PREALLOC_TIMERS=50
-CONFIG_PTHREAD_STACK_MIN=512
-CONFIG_RAM_SIZE=245760
-CONFIG_RAM_START=0x20010000
-CONFIG_RAW_BINARY=y
-CONFIG_SDCLONE_DISABLE=y
-CONFIG_SERIAL_TERMIOS=y
-CONFIG_SIG_DEFAULT=y
-CONFIG_SIG_SIGALRM_ACTION=y
-CONFIG_SIG_SIGUSR1_ACTION=y
-CONFIG_SIG_SIGUSR2_ACTION=y
-CONFIG_SPI=y
-CONFIG_STACK_COLORATION=y
-CONFIG_START_DAY=30
-CONFIG_START_MONTH=11
-CONFIG_STDIO_BUFFER_SIZE=32
-CONFIG_STM32H7_BKPSRAM=y
-CONFIG_STM32H7_DMA1=y
-CONFIG_STM32H7_OTGFS=y
-CONFIG_STM32H7_PROGMEM=y
-CONFIG_STM32H7_SERIAL_DISABLE_REORDERING=y
-CONFIG_STM32H7_TIM1=y
-CONFIG_STM32H7_USART3=y
-CONFIG_SYSTEMTICK_HOOK=y
-CONFIG_SYSTEM_CDCACM=y
-CONFIG_TASK_NAME_SIZE=24
-CONFIG_TTY_SIGINT=y
-CONFIG_TTY_SIGINT_CHAR=0x03
-CONFIG_TTY_SIGTSTP=y
-CONFIG_USART3_RXBUFSIZE=600
-CONFIG_USART3_TXBUFSIZE=300
-CONFIG_USBDEV=y
-CONFIG_USBDEV_BUSPOWERED=y
-CONFIG_USBDEV_MAXPOWER=500
-CONFIG_USEC_PER_TICK=1000
-CONFIG_USERMAIN_STACKSIZE=2944
-CONFIG_USER_ENTRYPOINT="bootloader_main"
@@ -1,279 +0,0 @@
-/************************************************************************************
- * nuttx-config/include/board.h
- *
- *   Copyright (C) 2020 Gregory Nutt. All rights reserved.
- *   Authors: David Sidrane <david.sidrane@nscdg.com>
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- * 3. Neither the name NuttX nor the names of its contributors may be
- *    used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ************************************************************************************/
-#pragma once
-
-#include "board_dma_map.h"
-
-#include <nuttx/config.h>
-
-#ifndef __ASSEMBLY__
-# include <stdint.h>
-#endif
-
-#include "stm32_rcc.h"
-#include "stm32_sdmmc.h"
-
-/* Clocking *************************************************************************/
-/* The board provides the following clock sources:
- *
- *   X1: 24 MHz crystal for HSE
- *
- * So we have these clock source available within the STM32
- *
- *   HSI: 16 MHz RC factory-trimmed internal oscillator
- *   HSE: 24 MHz crystal for HSE
- */
-#define STM32_BOARD_XTAL        24000000ul
-
-#define STM32_HSI_FREQUENCY     16000000ul
-#define STM32_LSI_FREQUENCY     32000
-#define STM32_HSE_FREQUENCY     STM32_BOARD_XTAL
-#define STM32_LSE_FREQUENCY     0
-
-/* Main PLL Configuration.
- *
- * PLL source is HSE = 24,000,000
- *
- * PLL_VCOx = (STM32_HSE_FREQUENCY / PLLM) * PLLN
- * Subject to:
- *
- *     1 <= PLLM <= 63
- *     4 <= PLLN <= 512
- *   150 MHz <= PLL_VCOL <= 420MHz
- *   192 MHz <= PLL_VCOH <= 836MHz
- *
- * SYSCLK  = PLL_VCO / PLLP
- * CPUCLK  = SYSCLK / D1CPRE
- * Subject to
- *
- *   PLLP1   = {2, 4, 6, 8, ..., 128}
- *   PLLP2,3 = {2, 3, 4, ..., 128}
- *   CPUCLK <= 480 MHz
- */
-#define STM32_PLLCFG_PLLSRC      RCC_PLLCKSELR_PLLSRC_HSE
-
-/* PLL1, wide 4 - 8 MHz input, enable DIVP, DIVQ, DIVR
- *
- *   PLL1_VCO = (24,000,000 / 2) * 80 = 960 MHz
- *
- *   PLL1P = PLL1_VCO/2  = 960 MHz / 2   = 480 MHz
- *   PLL1Q = PLL1_VCO/4  = 960 MHz / 4   = 240 MHz
- *   PLL1R = PLL1_VCO/8  = 960 MHz / 8   = 120 MHz
- */
-#define STM32_PLLCFG_PLL1CFG    (RCC_PLLCFGR_PLL1VCOSEL_WIDE|RCC_PLLCFGR_PLL1RGE_4_8_MHZ|RCC_PLLCFGR_DIVP1EN|RCC_PLLCFGR_DIVQ1EN|RCC_PLLCFGR_DIVR1EN)
-#define STM32_PLLCFG_PLL1M       RCC_PLLCKSELR_DIVM1(2)
-#define STM32_PLLCFG_PLL1N       RCC_PLL1DIVR_N1(80)
-#define STM32_PLLCFG_PLL1P       RCC_PLL1DIVR_P1(2)
-#define STM32_PLLCFG_PLL1Q       RCC_PLL1DIVR_Q1(4)
-#define STM32_PLLCFG_PLL1R       RCC_PLL1DIVR_R1(8)
-
-#define STM32_VCO1_FREQUENCY     ((STM32_HSE_FREQUENCY / 2) * 80)
-#define STM32_PLL1P_FREQUENCY    (STM32_VCO1_FREQUENCY / 2)
-#define STM32_PLL1Q_FREQUENCY    (STM32_VCO1_FREQUENCY / 4)
-#define STM32_PLL1R_FREQUENCY    (STM32_VCO1_FREQUENCY / 8)
-
-/* PLL2 */
-#define STM32_PLLCFG_PLL2CFG     (RCC_PLLCFGR_PLL2VCOSEL_WIDE|RCC_PLLCFGR_PLL2RGE_4_8_MHZ|RCC_PLLCFGR_DIVP2EN|RCC_PLLCFGR_DIVQ2EN|RCC_PLLCFGR_DIVR2EN)
-#define STM32_PLLCFG_PLL2M       RCC_PLLCKSELR_DIVM2(4)
-#define STM32_PLLCFG_PLL2N       RCC_PLL2DIVR_N2(32)
-#define STM32_PLLCFG_PLL2P       RCC_PLL2DIVR_P2(2)
-#define STM32_PLLCFG_PLL2Q       RCC_PLL2DIVR_Q2(2)
-#define STM32_PLLCFG_PLL2R       RCC_PLL2DIVR_R2(2)
-
-#define STM32_VCO2_FREQUENCY     ((STM32_HSE_FREQUENCY / 4) * 32)
-#define STM32_PLL2P_FREQUENCY    (STM32_VCO2_FREQUENCY / 2)
-#define STM32_PLL2Q_FREQUENCY    (STM32_VCO2_FREQUENCY / 2)
-#define STM32_PLL2R_FREQUENCY    (STM32_VCO2_FREQUENCY / 2)
-
-/* PLL3 */
-#define STM32_PLLCFG_PLL3CFG    (RCC_PLLCFGR_PLL3VCOSEL_WIDE|RCC_PLLCFGR_PLL3RGE_4_8_MHZ|RCC_PLLCFGR_DIVQ3EN)
-#define STM32_PLLCFG_PLL3M      RCC_PLLCKSELR_DIVM3(4)
-#define STM32_PLLCFG_PLL3N      RCC_PLL3DIVR_N3(32)
-#define STM32_PLLCFG_PLL3P      RCC_PLL3DIVR_P3(2)
-#define STM32_PLLCFG_PLL3Q      RCC_PLL3DIVR_Q3(4)
-#define STM32_PLLCFG_PLL3R      RCC_PLL3DIVR_R3(2)
-
-#define STM32_VCO3_FREQUENCY    ((STM32_HSE_FREQUENCY / 4) * 32)
-#define STM32_PLL3P_FREQUENCY   (STM32_VCO3_FREQUENCY / 2)
-#define STM32_PLL3Q_FREQUENCY   (STM32_VCO3_FREQUENCY / 4)
-#define STM32_PLL3R_FREQUENCY   (STM32_VCO3_FREQUENCY / 2)
-
-/* SYSCLK = PLL1P = 480MHz
- * CPUCLK = SYSCLK / 1 = 480 MHz
- */
-#define STM32_RCC_D1CFGR_D1CPRE  (RCC_D1CFGR_D1CPRE_SYSCLK)
-#define STM32_SYSCLK_FREQUENCY   (STM32_PLL1P_FREQUENCY)
-#define STM32_CPUCLK_FREQUENCY   (STM32_SYSCLK_FREQUENCY / 1)
-
-/* Configure Clock Assignments */
-
-/* AHB clock (HCLK) is SYSCLK/2 (240 MHz max)
- * HCLK1 = HCLK2 = HCLK3 = HCLK4 = 240
- */
-#define STM32_RCC_D1CFGR_HPRE   RCC_D1CFGR_HPRE_SYSCLKd2        /* HCLK  = SYSCLK / 2 */
-#define STM32_ACLK_FREQUENCY    (STM32_CPUCLK_FREQUENCY / 2)    /* ACLK in D1, HCLK3 in D1 */
-#define STM32_HCLK_FREQUENCY    (STM32_CPUCLK_FREQUENCY / 2)    /* HCLK in D2, HCLK4 in D3 */
-#define STM32_BOARD_HCLK        STM32_HCLK_FREQUENCY            /* same as above, to satisfy compiler */
-
-/* APB1 clock (PCLK1) is HCLK/2 (120 MHz) */
-#define STM32_RCC_D2CFGR_D2PPRE1  RCC_D2CFGR_D2PPRE1_HCLKd2       /* PCLK1 = HCLK / 2 */
-#define STM32_PCLK1_FREQUENCY     (STM32_HCLK_FREQUENCY/2)
-
-/* APB2 clock (PCLK2) is HCLK/2 (120 MHz) */
-#define STM32_RCC_D2CFGR_D2PPRE2  RCC_D2CFGR_D2PPRE2_HCLKd2       /* PCLK2 = HCLK / 2 */
-#define STM32_PCLK2_FREQUENCY     (STM32_HCLK_FREQUENCY/2)
-
-/* APB3 clock (PCLK3) is HCLK/2 (120 MHz) */
-#define STM32_RCC_D1CFGR_D1PPRE   RCC_D1CFGR_D1PPRE_HCLKd2        /* PCLK3 = HCLK / 2 */
-#define STM32_PCLK3_FREQUENCY     (STM32_HCLK_FREQUENCY/2)
-
-/* APB4 clock (PCLK4) is HCLK/4 (120 MHz) */
-#define STM32_RCC_D3CFGR_D3PPRE   RCC_D3CFGR_D3PPRE_HCLKd2       /* PCLK4 = HCLK / 2 */
-#define STM32_PCLK4_FREQUENCY     (STM32_HCLK_FREQUENCY/2)
-
-/* Timer clock frequencies */
-
-/* Timers driven from APB1 will be twice PCLK1 */
-#define STM32_APB1_TIM2_CLKIN   (2*STM32_PCLK1_FREQUENCY)
-#define STM32_APB1_TIM3_CLKIN   (2*STM32_PCLK1_FREQUENCY)
-#define STM32_APB1_TIM4_CLKIN   (2*STM32_PCLK1_FREQUENCY)
-#define STM32_APB1_TIM5_CLKIN   (2*STM32_PCLK1_FREQUENCY)
-#define STM32_APB1_TIM6_CLKIN   (2*STM32_PCLK1_FREQUENCY)
-#define STM32_APB1_TIM7_CLKIN   (2*STM32_PCLK1_FREQUENCY)
-#define STM32_APB1_TIM12_CLKIN  (2*STM32_PCLK1_FREQUENCY)
-#define STM32_APB1_TIM13_CLKIN  (2*STM32_PCLK1_FREQUENCY)
-#define STM32_APB1_TIM14_CLKIN  (2*STM32_PCLK1_FREQUENCY)
-
-/* Timers driven from APB2 will be twice PCLK2 */
-#define STM32_APB2_TIM1_CLKIN   (2*STM32_PCLK2_FREQUENCY)
-#define STM32_APB2_TIM8_CLKIN   (2*STM32_PCLK2_FREQUENCY)
-#define STM32_APB2_TIM15_CLKIN  (2*STM32_PCLK2_FREQUENCY)
-#define STM32_APB2_TIM16_CLKIN  (2*STM32_PCLK2_FREQUENCY)
-#define STM32_APB2_TIM17_CLKIN  (2*STM32_PCLK2_FREQUENCY)
-
-/* Kernel Clock Configuration
- *  Note: look at Table 54 in ST Manual
- */
-#define STM32_RCC_D2CCIP2R_I2C123SRC RCC_D2CCIP2R_I2C123SEL_HSI  /* I2C123 clock source */
-#define STM32_RCC_D3CCIPR_I2C4SRC	   RCC_D3CCIPR_I2C4SEL_HSI	 /* I2C4 clock source */
-#define STM32_RCC_D2CCIP1R_SPI123SRC RCC_D2CCIP1R_SPI123SEL_PLL2 /* SPI123 clock source */
-#define STM32_RCC_D2CCIP1R_SPI45SRC  RCC_D2CCIP1R_SPI45SEL_PLL2  /* SPI45 clock source */
-#define STM32_RCC_D3CCIPR_SPI6SRC    RCC_D3CCIPR_SPI6SEL_PLL2    /* SPI6 clock source */
-#define STM32_RCC_D2CCIP2R_USBSRC    RCC_D2CCIP2R_USBSEL_PLL3    /* USB 1 and 2 clock source */
-#define STM32_RCC_D3CCIPR_ADCSEL     RCC_D3CCIPR_ADCSEL_PLL2     /* ADC 1 2 3 clock source */
-#define STM32_RCC_D2CCIP1R_FDCANSEL  RCC_D2CCIP1R_FDCANSEL_HSE   /* FDCAN 1 2 clock source */
-
-#define STM32_FDCANCLK               STM32_HSE_FREQUENCY
-
-/* FLASH wait states */
-#define BOARD_FLASH_WAITSTATES 2
-
-/* SDMMC definitions ********************************************************/
-/* Init 400kHz, freq = PLL1Q/(2*div)  div =  PLL1Q/(2*freq) */
-#define STM32_SDMMC_INIT_CLKDIV     (300 << STM32_SDMMC_CLKCR_CLKDIV_SHIFT)
-
-/* 25 MHz Max for now, 25 mHZ = PLL1Q/(2*div), div =  PLL1Q/(2*freq)
- * div = 4.8 = 240 / 50, So round up to 5 for default speed 24 MB/s
- */
-#if defined(CONFIG_STM32H7_SDMMC_XDMA) || defined(CONFIG_STM32H7_SDMMC_IDMA)
-#  define STM32_SDMMC_MMCXFR_CLKDIV   (5 << STM32_SDMMC_CLKCR_CLKDIV_SHIFT)
-#else
-#  define STM32_SDMMC_MMCXFR_CLKDIV   (100 << STM32_SDMMC_CLKCR_CLKDIV_SHIFT)
-#endif
-#if defined(CONFIG_STM32H7_SDMMC_XDMA) || defined(CONFIG_STM32H7_SDMMC_IDMA)
-#  define STM32_SDMMC_SDXFR_CLKDIV    (5 << STM32_SDMMC_CLKCR_CLKDIV_SHIFT)
-#else
-#  define STM32_SDMMC_SDXFR_CLKDIV    (100 << STM32_SDMMC_CLKCR_CLKDIV_SHIFT)
-#endif
-
-#define STM32_SDMMC_CLKCR_EDGE      STM32_SDMMC_CLKCR_NEGEDGE
-
-
-/* UART/USART */
-#define GPIO_USART2_RX   GPIO_USART2_RX_2       /* PD6 */
-#define GPIO_USART2_TX   GPIO_USART2_TX_2       /* PD5 */
-#define GPIO_USART2_RTS  GPIO_USART2_RTS_2      /* PD4 */
-#define GPIO_USART2_CTS  GPIO_USART2_CTS_NSS_2  /* PD3 */
-
-#define GPIO_USART3_RX   GPIO_USART3_RX_3       /* PD9 */
-#define GPIO_USART3_TX   GPIO_USART3_TX_3       /* PD8 */
-#define GPIO_USART3_RTS  GPIO_USART3_RTS_2      /* PD12 */
-#define GPIO_USART3_CTS  GPIO_USART3_CTS_NSS_2  /* PD11 */
-
-#define GPIO_UART4_RX    GPIO_UART4_RX_1        /* PA1 */
-#define GPIO_UART4_TX    GPIO_UART4_TX_1        /* PA0 */
-
-#define GPIO_USART6_RX   GPIO_USART6_RX_1       /* PC7 */
-#define GPIO_USART6_TX   GPIO_USART6_TX_2       /* PG14 */
-
-#define GPIO_UART7_RX    GPIO_UART7_RX_1        /* PE7 */
-#define GPIO_UART7_TX    GPIO_UART7_TX_1        /* PE8 */
-
-#define GPIO_UART8_RX    GPIO_UART8_RX_1        /* PE0 */
-#define GPIO_UART8_TX    GPIO_UART8_TX_1        /* PE1 */
-
-
-/* CAN */
-#define GPIO_CAN1_RX     GPIO_CAN1_RX_3     /* PD0  */
-#define GPIO_CAN1_TX     GPIO_CAN1_TX_3     /* PD1 */
-#define GPIO_CAN2_RX     GPIO_CAN2_RX_1     /* PB12 */
-#define GPIO_CAN2_TX     GPIO_CAN2_TX_1     /* PB13 */
-
-
-/* SPI */
-#define ADJ_SLEW_RATE(p) (((p) & ~GPIO_SPEED_MASK) | (GPIO_SPEED_2MHz))
-
-#define GPIO_SPI1_SCK    ADJ_SLEW_RATE(GPIO_SPI1_SCK_1) /* PA5  */
-#define GPIO_SPI1_MISO   GPIO_SPI1_MISO_1               /* PA6  */
-#define GPIO_SPI1_MOSI   GPIO_SPI1_MOSI_1               /* PA7  */
-
-#define GPIO_SPI2_SCK    ADJ_SLEW_RATE(GPIO_SPI2_SCK_3) /* PB10 */
-#define GPIO_SPI2_MISO   GPIO_SPI2_MISO_1               /* PB14 */
-#define GPIO_SPI2_MOSI   GPIO_SPI2_MOSI_1               /* PB15 */
-
-#define GPIO_SPI5_SCK    ADJ_SLEW_RATE(GPIO_SPI5_SCK_1) /* PF7  */
-#define GPIO_SPI5_MISO   GPIO_SPI5_MISO_1               /* PF8  */
-#define GPIO_SPI5_MOSI   GPIO_SPI5_MOSI_2               /* PF9  */
-
-
-/* I2C */
-#define GPIO_I2C1_SCL GPIO_I2C1_SCL_2       /* PB8  */
-#define GPIO_I2C1_SDA GPIO_I2C1_SDA_2       /* PB9  */
-
-#define GPIO_I2C3_SCL GPIO_I2C3_SCL_2       /* PH7 */
-#define GPIO_I2C3_SDA GPIO_I2C3_SDA_2       /* PH8 */
-
-#define GPIO_I2C4_SCL GPIO_I2C4_SCL_4       /* PB6 */
-#define GPIO_I2C4_SDA GPIO_I2C4_SDA_4       /* PB7 */
@@ -1,44 +0,0 @@
-/****************************************************************************
- *
- *   Copyright (c) 2021 PX4 Development Team. All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- * 3. Neither the name PX4 nor the names of its contributors may be
- *    used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ****************************************************************************/
-
-#pragma once
-
-// DMAMUX1
-#define DMAMAP_SPI1_RX    DMAMAP_DMA12_SPI1RX_0 /* DMA1:37 */
-#define DMAMAP_SPI1_TX    DMAMAP_DMA12_SPI1TX_0 /* DMA1:38 */
-
-#define DMAMAP_USART6_RX   DMAMAP_DMA12_USART6RX_1 /* DMA1:71 */
-#define DMAMAP_USART6_TX   DMAMAP_DMA12_USART6TX_1 /* DMA1:72 */
-
-#define DMAMAP_SPI5_RX    DMAMAP_DMA12_SPI5RX_0 /* DMA1:83 */
-#define DMAMAP_SPI5_TX    DMAMAP_DMA12_SPI5TX_0 /* DMA1:84 */
@@ -1,235 +0,0 @@
-#
-# This file is autogenerated: PLEASE DO NOT EDIT IT.
-#
-# You can use "make menuconfig" to make any modifications to the installed .config file.
-# You can then do "make savedefconfig" to generate a new defconfig file that includes your
-# modifications.
-#
-# CONFIG_DISABLE_ENVIRON is not set
-# CONFIG_DISABLE_PSEUDOFS_OPERATIONS is not set
-# CONFIG_MMCSD_HAVE_CARDDETECT is not set
-# CONFIG_MMCSD_HAVE_WRITEPROTECT is not set
-# CONFIG_MMCSD_MMCSUPPORT is not set
-# CONFIG_MMCSD_SPI is not set
-# CONFIG_NSH_DISABLEBG is not set
-# CONFIG_NSH_DISABLESCRIPT is not set
-# CONFIG_NSH_DISABLE_DF is not set
-# CONFIG_NSH_DISABLE_EXEC is not set
-# CONFIG_NSH_DISABLE_EXIT is not set
-# CONFIG_NSH_DISABLE_GET is not set
-# CONFIG_NSH_DISABLE_ITEF is not set
-# CONFIG_NSH_DISABLE_LOOPS is not set
-# CONFIG_NSH_DISABLE_MKFATFS is not set
-# CONFIG_NSH_DISABLE_SEMICOLON is not set
-# CONFIG_NSH_DISABLE_TIME is not set
-CONFIG_ARCH="arm"
-CONFIG_ARCH_BOARD_CUSTOM=y
-CONFIG_ARCH_BOARD_CUSTOM_DIR="../../../../boards/mro/ctrl-zero-classic/nuttx-config"
-CONFIG_ARCH_BOARD_CUSTOM_DIR_RELPATH=y
-CONFIG_ARCH_BOARD_CUSTOM_NAME="px4"
-CONFIG_ARCH_CHIP="stm32h7"
-CONFIG_ARCH_CHIP_STM32H743ZIT6=y
-CONFIG_ARCH_CHIP_STM32H7=y
-CONFIG_ARCH_INTERRUPTSTACK=512
-CONFIG_ARCH_STACKDUMP=y
-CONFIG_ARMV7M_BASEPRI_WAR=y
-CONFIG_ARMV7M_DCACHE=y
-CONFIG_ARMV7M_DTCM=y
-CONFIG_ARMV7M_ICACHE=y
-CONFIG_ARMV7M_MEMCPY=y
-CONFIG_ARMV7M_USEBASEPRI=y
-CONFIG_BOARDCTL_RESET=y
-CONFIG_BOARD_CRASHDUMP=y
-CONFIG_BOARD_LOOPSPERMSEC=95150
-CONFIG_BOARD_RESET_ON_ASSERT=2
-CONFIG_BUILTIN=y
-CONFIG_C99_BOOL8=y
-CONFIG_CDCACM=y
-CONFIG_CDCACM_PRODUCTID=0x1022
-CONFIG_CDCACM_PRODUCTSTR="mRoControlZero Classic"
-CONFIG_CDCACM_RXBUFSIZE=600
-CONFIG_CDCACM_TXBUFSIZE=12000
-CONFIG_CDCACM_VENDORID=0x26ac
-CONFIG_CDCACM_VENDORSTR="mRo"
-CONFIG_CLOCK_MONOTONIC=y
-CONFIG_DEBUG_FULLOPT=y
-CONFIG_DEBUG_HARDFAULT_ALERT=y
-CONFIG_DEBUG_MEMFAULT=y
-CONFIG_DEBUG_SYMBOLS=y
-CONFIG_DEFAULT_SMALL=y
-CONFIG_DEV_FIFO_SIZE=0
-CONFIG_DEV_PIPE_MAXSIZE=1024
-CONFIG_DEV_PIPE_SIZE=70
-CONFIG_DISABLE_MQUEUE=y
-CONFIG_EXPERIMENTAL=y
-CONFIG_FAT_DMAMEMORY=y
-CONFIG_FAT_LCNAMES=y
-CONFIG_FAT_LFN=y
-CONFIG_FAT_LFN_ALIAS_HASH=y
-CONFIG_FDCLONE_STDIO=y
-CONFIG_FS_BINFS=y
-CONFIG_FS_CROMFS=y
-CONFIG_FS_FAT=y
-CONFIG_FS_FATTIME=y
-CONFIG_FS_PROCFS=y
-CONFIG_FS_PROCFS_INCLUDE_PROGMEM=y
-CONFIG_FS_PROCFS_REGISTER=y
-CONFIG_FS_ROMFS=y
-CONFIG_GRAN=y
-CONFIG_GRAN_INTR=y
-CONFIG_HAVE_CXX=y
-CONFIG_HAVE_CXXINITIALIZE=y
-CONFIG_I2C=y
-CONFIG_I2C_RESET=y
-CONFIG_IDLETHREAD_STACKSIZE=750
-CONFIG_LIBC_FLOATINGPOINT=y
-CONFIG_LIBC_LONG_LONG=y
-CONFIG_LIBC_STRERROR=y
-CONFIG_FS_PROCFS_MAX_TASKS=64
-CONFIG_MEMSET_64BIT=y
-CONFIG_MEMSET_OPTSPEED=y
-CONFIG_MKFATFS_BUFFER_ALIGMENT=32
-CONFIG_MMCSD=y
-CONFIG_MMCSD_SDIO=y
-CONFIG_MMCSD_SDIOWAIT_WRCOMPLETE=y
-CONFIG_MM_REGIONS=4
-CONFIG_MTD=y
-CONFIG_MTD_BYTE_WRITE=y
-CONFIG_MTD_PARTITION=y
-CONFIG_MTD_PROGMEM=y
-CONFIG_MTD_RAMTRON=y
-CONFIG_NAME_MAX=40
-CONFIG_NSH_ARCHINIT=y
-CONFIG_NSH_ARGCAT=y
-CONFIG_NSH_BUILTIN_APPS=y
-CONFIG_NSH_CMDPARMS=y
-CONFIG_NSH_CROMFSETC=y
-CONFIG_NSH_DISABLE_IFCONFIG=y
-CONFIG_NSH_DISABLE_IFUPDOWN=y
-CONFIG_NSH_DISABLE_TELNETD=y
-CONFIG_NSH_LINELEN=128
-CONFIG_NSH_MAXARGUMENTS=15
-CONFIG_NSH_NESTDEPTH=8
-CONFIG_NSH_QUOTE=y
-CONFIG_NSH_ROMFSETC=y
-CONFIG_NSH_ROMFSSECTSIZE=128
-CONFIG_NSH_STRERROR=y
-CONFIG_NSH_VARS=y
-CONFIG_OTG_ID_GPIO_DISABLE=y
-CONFIG_PIPES=y
-CONFIG_PREALLOC_TIMERS=50
-CONFIG_PRIORITY_INHERITANCE=y
-CONFIG_PTHREAD_MUTEX_ROBUST=y
-CONFIG_PTHREAD_STACK_MIN=512
-CONFIG_RAMTRON_SETSPEED=y
-CONFIG_RAM_SIZE=245760
-CONFIG_RAM_START=0x20010000
-CONFIG_RAW_BINARY=y
-CONFIG_READLINE_CMD_HISTORY=y
-CONFIG_READLINE_TABCOMPLETION=y
-CONFIG_RTC_DATETIME=y
-CONFIG_SCHED_ATEXIT=y
-CONFIG_SCHED_HPWORK=y
-CONFIG_SCHED_HPWORKPRIORITY=249
-CONFIG_SCHED_HPWORKSTACKSIZE=1280
-CONFIG_SCHED_INSTRUMENTATION=y
-CONFIG_SCHED_INSTRUMENTATION_EXTERNAL=y
-CONFIG_SCHED_LPWORK=y
-CONFIG_SCHED_LPWORKPRIORITY=50
-CONFIG_SCHED_LPWORKSTACKSIZE=1632
-CONFIG_SCHED_WAITPID=y
-CONFIG_SDCLONE_DISABLE=y
-CONFIG_SDMMC1_SDIO_PULLUP=y
-CONFIG_SEM_PREALLOCHOLDERS=32
-CONFIG_SERIAL_IFLOWCONTROL_WATERMARKS=y
-CONFIG_SERIAL_TERMIOS=y
-CONFIG_SIG_DEFAULT=y
-CONFIG_SIG_SIGALRM_ACTION=y
-CONFIG_SIG_SIGUSR1_ACTION=y
-CONFIG_SIG_SIGUSR2_ACTION=y
-CONFIG_SIG_SIGWORK=4
-CONFIG_STACK_COLORATION=y
-CONFIG_START_DAY=30
-CONFIG_START_MONTH=11
-CONFIG_STDIO_BUFFER_SIZE=256
-CONFIG_STM32H7_ADC1=y
-CONFIG_STM32H7_ADC3=y
-CONFIG_STM32H7_BBSRAM=y
-CONFIG_STM32H7_BBSRAM_FILES=5
-CONFIG_STM32H7_BDMA=y
-CONFIG_STM32H7_BKPSRAM=y
-CONFIG_STM32H7_DMA1=y
-CONFIG_STM32H7_DMA2=y
-CONFIG_STM32H7_DMACAPABLE=y
-CONFIG_STM32H7_FLOWCONTROL_BROKEN=y
-CONFIG_STM32H7_I2C1=y
-CONFIG_STM32H7_I2C3=y
-CONFIG_STM32H7_I2C4=y
-CONFIG_STM32H7_I2C_DYNTIMEO=y
-CONFIG_STM32H7_I2C_DYNTIMEO_STARTSTOP=10
-CONFIG_STM32H7_OTGFS=y
-CONFIG_STM32H7_PROGMEM=y
-CONFIG_STM32H7_RTC=y
-CONFIG_STM32H7_RTC_HSECLOCK=y
-CONFIG_STM32H7_RTC_MAGIC_REG=1
-CONFIG_STM32H7_SAVE_CRASHDUMP=y
-CONFIG_STM32H7_SDMMC1=y
-CONFIG_STM32H7_SERIALBRK_BSDCOMPAT=y
-CONFIG_STM32H7_SERIAL_DISABLE_REORDERING=y
-CONFIG_STM32H7_SPI1=y
-CONFIG_STM32H7_SPI1_DMA=y
-CONFIG_STM32H7_SPI1_DMA_BUFFER=1024
-CONFIG_STM32H7_SPI2=y
-CONFIG_STM32H7_SPI5=y
-CONFIG_STM32H7_SPI5_DMA=y
-CONFIG_STM32H7_SPI5_DMA_BUFFER=1024
-CONFIG_STM32H7_SPI_DMA=y
-CONFIG_STM32H7_TIM1=y
-CONFIG_STM32H7_TIM2=y
-CONFIG_STM32H7_TIM3=y
-CONFIG_STM32H7_TIM4=y
-CONFIG_STM32H7_TIM8=y
-CONFIG_STM32H7_UART4=y
-CONFIG_STM32H7_UART7=y
-CONFIG_STM32H7_UART8=y
-CONFIG_STM32H7_USART2=y
-CONFIG_STM32H7_USART3=y
-CONFIG_STM32H7_USART6=y
-CONFIG_STM32H7_USART_BREAKS=y
-CONFIG_STM32H7_USART_INVERT=y
-CONFIG_STM32H7_USART_SINGLEWIRE=y
-CONFIG_STM32H7_USART_SWAP=y
-CONFIG_SYSTEM_CDCACM=y
-CONFIG_SYSTEM_NSH=y
-CONFIG_TASK_NAME_SIZE=24
-CONFIG_TTY_SIGINT=y
-CONFIG_TTY_SIGTSTP=y
-CONFIG_UART4_BAUD=57600
-CONFIG_UART4_RXBUFSIZE=600
-CONFIG_UART4_TXBUFSIZE=1500
-CONFIG_UART7_BAUD=57600
-CONFIG_UART7_RXBUFSIZE=600
-CONFIG_UART7_TXBUFSIZE=1500
-CONFIG_UART8_BAUD=57600
-CONFIG_UART8_RXBUFSIZE=600
-CONFIG_UART8_SERIAL_CONSOLE=y
-CONFIG_UART8_TXBUFSIZE=1500
-CONFIG_USART2_BAUD=57600
-CONFIG_USART2_IFLOWCONTROL=y
-CONFIG_USART2_OFLOWCONTROL=y
-CONFIG_USART2_RXBUFSIZE=600
-CONFIG_USART2_TXBUFSIZE=1500
-CONFIG_USART3_BAUD=57600
-CONFIG_USART3_IFLOWCONTROL=y
-CONFIG_USART3_OFLOWCONTROL=y
-CONFIG_USART3_RXBUFSIZE=600
-CONFIG_USART3_TXBUFSIZE=3000
-CONFIG_USART6_BAUD=57600
-CONFIG_USART6_RXBUFSIZE=600
-CONFIG_USART6_TXBUFSIZE=1500
-CONFIG_USBDEV=y
-CONFIG_USBDEV_BUSPOWERED=y
-CONFIG_USBDEV_MAXPOWER=500
-CONFIG_USEC_PER_TICK=1000
-CONFIG_USERMAIN_STACKSIZE=2944
-CONFIG_USER_ENTRYPOINT="nsh_main"
@@ -1,221 +0,0 @@
-/****************************************************************************
- * scripts/script.ld
- *
- *   Copyright (C) 2020 Gregory Nutt. All rights reserved.
- *   Author: Gregory Nutt <gnutt@nuttx.org>
- *
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- * 3. Neither the name NuttX nor the names of its contributors may be
- *    used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ****************************************************************************/
-
-/* The board uses an STM32H743II has 2048Kb of main FLASH memory.
- * The flash memory is partitioned into a User Flash memory and a System
- * Flash memory. Each of these memories has two banks:
- *
- *   1) User Flash memory:
- *
- *      Bank 1: Start address 0x0800:0000 to 0x080F:FFFF with 8 sectors, 128Kb each
- *      Bank 2: Start address 0x0810:0000 to 0x081F:FFFF with 8 sectors, 128Kb each
- *
- *   2) System Flash memory:
- *
- *      Bank 1: Start address 0x1FF0:0000 to 0x1FF1:FFFF with 1 x 128Kb sector
- *      Bank 1: Start address 0x1FF4:0000 to 0x1FF5:FFFF with 1 x 128Kb sector
- *
- *   3) User option bytes for user configuration, only in Bank 1.
- *
- * In the STM32H743II, two different boot spaces can be selected through
- * the BOOT pin and the boot base address programmed in the BOOT_ADD0 and
- * BOOT_ADD1 option bytes:
- *
- *   1) BOOT=0: Boot address defined by user option byte BOOT_ADD0[15:0].
- *      ST programmed value: Flash memory at 0x0800:0000
- *   2) BOOT=1: Boot address defined by user option byte BOOT_ADD1[15:0].
- *      ST programmed value: System bootloader at 0x1FF0:0000
- *
- * There's a switch on board, the BOOT0 pin is at ground so by default,
- * the STM32 will boot to address 0x0800:0000 in FLASH unless the switch is
- * drepresed, then the boot will be from 0x1FF0:0000
- *
- * The STM32H743ZI also has 1024Kb of data SRAM.
- * SRAM is split up into several blocks and into three power domains:
- *
- *   1) TCM SRAMs are dedicated to the Cortex-M7 and are accessible with
- *      0 wait states by the Cortex-M7 and by MDMA through AHBS slave bus
- *
- *      1.1) 128Kb of DTCM-RAM beginning at address 0x2000:0000
- *
- *           The DTCM-RAM is organized as 2 x 64Kb DTCM-RAMs on 2 x 32 bit
- *           DTCM ports. The DTCM-RAM could be used for critical real-time
- *           data, such as interrupt service routines or stack / heap memory.
- *           Both DTCM-RAMs can be used in parallel (for load/store operations)
- *           thanks to the Cortex-M7 dual issue capability.
- *
- *      1.2)  64Kb of ITCM-RAM beginning at address 0x0000:0000
- *
- *           This RAM is connected to ITCM 64-bit interface designed for
- *           execution of critical real-times routines by the CPU.
- *
- *   2) AXI SRAM (D1 domain) accessible by all system masters except BDMA
- *      through D1 domain AXI bus matrix
- *
- *      2.1) 512Kb of SRAM beginning at address 0x2400:0000
- *
- *   3) AHB SRAM (D2 domain) accessible by all system masters except BDMA
- *      through D2 domain AHB bus matrix
- *
- *      3.1) 128Kb of SRAM1 beginning at address 0x3000:0000
- *      3.2) 128Kb of SRAM2 beginning at address 0x3002:0000
- *      3.3)  32Kb of SRAM3 beginning at address 0x3004:0000
- *
- *      SRAM1 - SRAM3 are one contiguous block: 288Kb at address 0x3000:0000
- *
- *   4) AHB SRAM (D3 domain) accessible by most of system masters
- *      through D3 domain AHB bus matrix
- *
- *      4.1)  64Kb of SRAM4 beginning at address 0x3800:0000
- *      4.1)   4Kb of backup RAM beginning at address 0x3880:0000
- *
- * When booting from FLASH, FLASH memory is aliased to address 0x0000:0000
- * where the code expects to begin execution by jumping to the entry point in
- * the 0x0800:0000 address range.
- */
-
-MEMORY
-{
-	ITCM_RAM  (rwx) : ORIGIN = 0x00000000, LENGTH =   64K
-	FLASH      (rx) : ORIGIN = 0x08000000, LENGTH =  128K
-	DTCM1_RAM (rwx) : ORIGIN = 0x20000000, LENGTH =   64K
-	DTCM2_RAM (rwx) : ORIGIN = 0x20010000, LENGTH =   64K
-	AXI_SRAM  (rwx) : ORIGIN = 0x24000000, LENGTH =  512K /* D1 domain AXI bus */
-	SRAM1     (rwx) : ORIGIN = 0x30000000, LENGTH =  128K /* D2 domain AHB bus */
-	SRAM2     (rwx) : ORIGIN = 0x30020000, LENGTH =  128K /* D2 domain AHB bus */
-	SRAM3     (rwx) : ORIGIN = 0x30040000, LENGTH =   32K /* D2 domain AHB bus */
-	SRAM4     (rwx) : ORIGIN = 0x38000000, LENGTH =   64K /* D3 domain */
-	BKPRAM    (rwx) : ORIGIN = 0x38800000, LENGTH =    4K
-}
-
-OUTPUT_ARCH(arm)
-EXTERN(_vectors)
-ENTRY(_stext)
-
-/*
- * Ensure that abort() is present in the final object.  The exception handling
- * code pulled in by libgcc.a requires it (and that code cannot be easily avoided).
- */
-EXTERN(abort)
-EXTERN(_bootdelay_signature)
-
-SECTIONS
-{
-	.text : {
-		_stext = ABSOLUTE(.);
-		*(.vectors)
-		. = ALIGN(32);
-		/*
-		This signature provides the bootloader with a way to delay booting
-		*/
-		_bootdelay_signature = ABSOLUTE(.);
-		FILL(0xffecc2925d7d05c5)
-		. += 8;
-		*(.text .text.*)
-		*(.fixup)
-		*(.gnu.warning)
-		*(.rodata .rodata.*)
-		*(.gnu.linkonce.t.*)
-		*(.glue_7)
-		*(.glue_7t)
-		*(.got)
-		*(.gcc_except_table)
-		*(.gnu.linkonce.r.*)
-		_etext = ABSOLUTE(.);
-
-	} > FLASH
-
-	/*
-	 * Init functions (static constructors and the like)
-	 */
-	.init_section : {
-		_sinit = ABSOLUTE(.);
-		KEEP(*(.init_array .init_array.*))
-		_einit = ABSOLUTE(.);
-	} > FLASH
-
-	.ARM.extab : {
-		*(.ARM.extab*)
-	} > FLASH
-
-	__exidx_start = ABSOLUTE(.);
-	.ARM.exidx : {
-		*(.ARM.exidx*)
-	} > FLASH
-	__exidx_end = ABSOLUTE(.);
-
-	_eronly = ABSOLUTE(.);
-
-	.data : {
-		_sdata = ABSOLUTE(.);
-		*(.data .data.*)
-		*(.gnu.linkonce.d.*)
-		CONSTRUCTORS
-		_edata = ABSOLUTE(.);
-	} > AXI_SRAM AT > FLASH
-
-	.bss : {
-		_sbss = ABSOLUTE(.);
-		*(.bss .bss.*)
-		*(.gnu.linkonce.b.*)
-		*(COMMON)
-		. = ALIGN(4);
-		_ebss = ABSOLUTE(.);
-	} > AXI_SRAM
-
-	/* Stabs debugging sections. */
-	.stab 0 : { *(.stab) }
-	.stabstr 0 : { *(.stabstr) }
-	.stab.excl 0 : { *(.stab.excl) }
-	.stab.exclstr 0 : { *(.stab.exclstr) }
-	.stab.index 0 : { *(.stab.index) }
-	.stab.indexstr 0 : { *(.stab.indexstr) }
-	.comment 0 : { *(.comment) }
-	.debug_abbrev 0 : { *(.debug_abbrev) }
-	.debug_info 0 : { *(.debug_info) }
-	.debug_line 0 : { *(.debug_line) }
-	.debug_pubnames 0 : { *(.debug_pubnames) }
-	.debug_aranges 0 : { *(.debug_aranges) }
-
-	.ramfunc : {
-		_sramfuncs = .;
-		*(.ramfunc  .ramfunc.*)
-		. = ALIGN(4);
-		_eramfuncs = .;
-	} > ITCM_RAM AT > FLASH
-
-	_framfuncs = LOADADDR(.ramfunc);
-}
@@ -1,228 +0,0 @@
-/****************************************************************************
- * scripts/script.ld
- *
- *   Copyright (C) 2021 Gregory Nutt. All rights reserved.
- *   Author: Gregory Nutt <gnutt@nuttx.org>
- *
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- * 3. Neither the name NuttX nor the names of its contributors may be
- *    used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ****************************************************************************/
-
-/* The board uses an STM32H743XIH6 and has 2048Kb of main FLASH memory.
- * The flash memory is partitioned into a User Flash memory and a System
- * Flash memory. Each of these memories has two banks:
- *
- *   1) User Flash memory:
- *
- *      Bank 1: Start address 0x0800:0000 to 0x080F:FFFF with 8 sectors, 128Kb each
- *      Bank 2: Start address 0x0810:0000 to 0x081F:FFFF with 8 sectors, 128Kb each
- *
- *   2) System Flash memory:
- *
- *      Bank 1: Start address 0x1FF0:0000 to 0x1FF1:FFFF with 1 x 128Kb sector
- *      Bank 1: Start address 0x1FF4:0000 to 0x1FF5:FFFF with 1 x 128Kb sector
- *
- *   3) User option bytes for user configuration, only in Bank 1.
- *
- * In the STM32H743II, two different boot spaces can be selected through
- * the BOOT pin and the boot base address programmed in the BOOT_ADD0 and
- * BOOT_ADD1 option bytes:
- *
- *   1) BOOT=0: Boot address defined by user option byte BOOT_ADD0[15:0].
- *      ST programmed value: Flash memory at 0x0800:0000
- *   2) BOOT=1: Boot address defined by user option byte BOOT_ADD1[15:0].
- *      ST programmed value: System bootloader at 0x1FF0:0000
- *
- * There's a switch on board, the BOOT0 pin is at ground so by default,
- * the STM32 will boot to address 0x0800:0000 in FLASH unless the switch is
- * drepresed, then the boot will be from 0x1FF0:0000
- *
- * The STM32H743ZI also has 1024Kb of data SRAM.
- * SRAM is split up into several blocks and into three power domains:
- *
- *   1) TCM SRAMs are dedicated to the Cortex-M7 and are accessible with
- *      0 wait states by the Cortex-M7 and by MDMA through AHBS slave bus
- *
- *      1.1) 128Kb of DTCM-RAM beginning at address 0x2000:0000
- *
- *           The DTCM-RAM is organized as 2 x 64Kb DTCM-RAMs on 2 x 32 bit
- *           DTCM ports. The DTCM-RAM could be used for critical real-time
- *           data, such as interrupt service routines or stack / heap memory.
- *           Both DTCM-RAMs can be used in parallel (for load/store operations)
- *           thanks to the Cortex-M7 dual issue capability.
- *
- *      1.2)  64Kb of ITCM-RAM beginning at address 0x0000:0000
- *
- *           This RAM is connected to ITCM 64-bit interface designed for
- *           execution of critical real-times routines by the CPU.
- *
- *   2) AXI SRAM (D1 domain) accessible by all system masters except BDMA
- *      through D1 domain AXI bus matrix
- *
- *      2.1) 512Kb of SRAM beginning at address 0x2400:0000
- *
- *   3) AHB SRAM (D2 domain) accessible by all system masters except BDMA
- *      through D2 domain AHB bus matrix
- *
- *      3.1) 128Kb of SRAM1 beginning at address 0x3000:0000
- *      3.2) 128Kb of SRAM2 beginning at address 0x3002:0000
- *      3.3)  32Kb of SRAM3 beginning at address 0x3004:0000
- *
- *      SRAM1 - SRAM3 are one contiguous block: 288Kb at address 0x3000:0000
- *
- *   4) AHB SRAM (D3 domain) accessible by most of system masters
- *      through D3 domain AHB bus matrix
- *
- *      4.1)  64Kb of SRAM4 beginning at address 0x3800:0000
- *      4.1)   4Kb of backup RAM beginning at address 0x3880:0000
- *
- * When booting from FLASH, FLASH memory is aliased to address 0x0000:0000
- * where the code expects to begin execution by jumping to the entry point in
- * the 0x0800:0000 address range.
- */
-
-MEMORY
-{
-	ITCM_RAM  (rwx) : ORIGIN = 0x00000000, LENGTH =   64K
-	FLASH      (rx) : ORIGIN = 0x08020000, LENGTH = 1920K
-
-	DTCM1_RAM (rwx) : ORIGIN = 0x20000000, LENGTH =   64K
-	DTCM2_RAM (rwx) : ORIGIN = 0x20010000, LENGTH =   64K
-	AXI_SRAM  (rwx) : ORIGIN = 0x24000000, LENGTH =  512K /* D1 domain AXI bus */
-	SRAM1     (rwx) : ORIGIN = 0x30000000, LENGTH =  128K /* D2 domain AHB bus */
-	SRAM2     (rwx) : ORIGIN = 0x30020000, LENGTH =  128K /* D2 domain AHB bus */
-	SRAM3     (rwx) : ORIGIN = 0x30040000, LENGTH =   32K /* D2 domain AHB bus */
-	SRAM4     (rwx) : ORIGIN = 0x38000000, LENGTH =   64K /* D3 domain */
-	BKPRAM    (rwx) : ORIGIN = 0x38800000, LENGTH =    4K
-}
-
-OUTPUT_ARCH(arm)
-EXTERN(_vectors)
-ENTRY(_stext)
-
-/*
- * Ensure that abort() is present in the final object.  The exception handling
- * code pulled in by libgcc.a requires it (and that code cannot be easily avoided).
- */
-EXTERN(abort)
-EXTERN(_bootdelay_signature)
-
-SECTIONS
-{
-	.text : {
-		_stext = ABSOLUTE(.);
-		*(.vectors)
-		. = ALIGN(32);
-		/*
-		This signature provides the bootloader with a way to delay booting
-		*/
-		_bootdelay_signature = ABSOLUTE(.);
-		FILL(0xffecc2925d7d05c5)
-		. += 8;
-		*(.text .text.*)
-		*(.fixup)
-		*(.gnu.warning)
-		*(.rodata .rodata.*)
-		*(.gnu.linkonce.t.*)
-		*(.glue_7)
-		*(.glue_7t)
-		*(.got)
-		*(.gcc_except_table)
-		*(.gnu.linkonce.r.*)
-		_etext = ABSOLUTE(.);
-
-	} > FLASH
-
-	/*
-	 * Init functions (static constructors and the like)
-	 */
-	.init_section : {
-		_sinit = ABSOLUTE(.);
-		KEEP(*(.init_array .init_array.*))
-		_einit = ABSOLUTE(.);
-	} > FLASH
-
-
-	.ARM.extab : {
-		*(.ARM.extab*)
-	} > FLASH
-
-	__exidx_start = ABSOLUTE(.);
-	.ARM.exidx : {
-		*(.ARM.exidx*)
-	} > FLASH
-	__exidx_end = ABSOLUTE(.);
-
-	_eronly = ABSOLUTE(.);
-
-	.data : {
-		_sdata = ABSOLUTE(.);
-		*(.data .data.*)
-		*(.gnu.linkonce.d.*)
-		CONSTRUCTORS
-		_edata = ABSOLUTE(.);
-
-		/* Pad out last section as the STM32H7 Flash write size is 256 bits. 32 bytes */
-		. = ALIGN(16);
-		FILL(0xffff)
-		. += 16;
-	} > AXI_SRAM AT > FLASH  = 0xffff
-
-	.bss : {
-		_sbss = ABSOLUTE(.);
-		*(.bss .bss.*)
-		*(.gnu.linkonce.b.*)
-		*(COMMON)
-		. = ALIGN(4);
-		_ebss = ABSOLUTE(.);
-	} > AXI_SRAM
-
-	/* Emit the the D3 power domain section for locating BDMA data */
-
-	.sram4_reserve (NOLOAD) :
-	{
-		*(.sram4)
-		. = ALIGN(4);
-		_sram4_heap_start = ABSOLUTE(.);
-	} > SRAM4
-
-	/* Stabs debugging sections. */
-	.stab 0 : { *(.stab) }
-	.stabstr 0 : { *(.stabstr) }
-	.stab.excl 0 : { *(.stab.excl) }
-	.stab.exclstr 0 : { *(.stab.exclstr) }
-	.stab.index 0 : { *(.stab.index) }
-	.stab.indexstr 0 : { *(.stab.indexstr) }
-	.comment 0 : { *(.comment) }
-	.debug_abbrev 0 : { *(.debug_abbrev) }
-	.debug_info 0 : { *(.debug_info) }
-	.debug_line 0 : { *(.debug_line) }
-	.debug_pubnames 0 : { *(.debug_pubnames) }
-	.debug_aranges 0 : { *(.debug_aranges) }
-}
@@ -1,64 +0,0 @@
-############################################################################
-#
-#   Copyright (c) 2021 PX4 Development Team. All rights reserved.
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions
-# are met:
-#
-# 1. Redistributions of source code must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-# 2. Redistributions in binary form must reproduce the above copyright
-#    notice, this list of conditions and the following disclaimer in
-#    the documentation and/or other materials provided with the
-#    distribution.
-# 3. Neither the name PX4 nor the names of its contributors may be
-#    used to endorse or promote products derived from this software
-#    without specific prior written permission.
-#
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
-# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
-# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
-# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
-# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
-# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
-# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
-# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-# POSSIBILITY OF SUCH DAMAGE.
-#
-############################################################################
-if("${PX4_BOARD_LABEL}" STREQUAL  "bootloader")
-	add_library(drivers_board
-		bootloader_main.c
-		usb.c
-	)
-	target_link_libraries(drivers_board
-		PRIVATE
-			nuttx_arch
-			nuttx_drivers
-			bootloader
-	)
-	target_include_directories(drivers_board PRIVATE ${PX4_SOURCE_DIR}/platforms/nuttx/src/bootloader/common)
-
-else()
-	add_library(drivers_board
-		i2c.cpp
-		init.c
-		led.c
-		spi.cpp
-		timer_config.cpp
-		usb.c
-	)
-
-	target_link_libraries(drivers_board
-		PRIVATE
-			arch_spi
-			drivers__led
-			nuttx_arch
-			nuttx_drivers
-			px4_layer
-	)
-endif()
@@ -1,188 +0,0 @@
-/****************************************************************************
- *
- *   Copyright (c) 2021 PX4 Development Team. All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- * 3. Neither the name PX4 nor the names of its contributors may be
- *    used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ****************************************************************************/
-
-/**
- * @file board_config.h
- *
- * Board internal definitions
- */
-
-#pragma once
-
-#include <px4_platform_common/px4_config.h>
-#include <nuttx/compiler.h>
-#include <stdint.h>
-#include <stm32_gpio.h>
-
-/* LEDs are driven with push open drain to support Anode to 5V or 3.3V */
-#define GPIO_nLED_RED   /* PB11 */ (GPIO_OUTPUT|GPIO_OPENDRAIN|GPIO_SPEED_50MHz|GPIO_OUTPUT_SET|GPIO_PORTB|GPIO_PIN11)
-#define GPIO_nLED_GREEN /* PB1  */ (GPIO_OUTPUT|GPIO_OPENDRAIN|GPIO_SPEED_50MHz|GPIO_OUTPUT_SET|GPIO_PORTB|GPIO_PIN1)
-#define GPIO_nLED_BLUE  /* PB3  */ (GPIO_OUTPUT|GPIO_OPENDRAIN|GPIO_SPEED_50MHz|GPIO_OUTPUT_SET|GPIO_PORTB|GPIO_PIN3)
-
-#define BOARD_HAS_CONTROL_STATUS_LEDS      1
-#define BOARD_OVERLOAD_LED     LED_RED
-#define BOARD_ARMED_STATE_LED  LED_BLUE
-
-/* ADC channels */
-#define PX4_ADC_GPIO  \
-	/* PA2 */  GPIO_ADC12_INP14,  \
-	/* PA3 */  GPIO_ADC12_INP15,  \
-	/* PA4 */  GPIO_ADC12_INP18,  \
-	/* PC1 */  GPIO_ADC123_INP11
-
-/* Define Channel numbers must match above GPIO pins */
-#define ADC_BATTERY_VOLTAGE_CHANNEL       14 /* PA2 BATT_VOLT_SENS */
-#define ADC_BATTERY_CURRENT_CHANNEL       15 /* PA3 BATT_CURRENT_SENS */
-#define ADC_SCALED_V5_CHANNEL             18 /* PA4 VDD_5V_SENS */
-#define ADC_RC_RSSI_CHANNEL               11 /* PC1 */
-
-#define ADC_CHANNELS \
-	((1 << ADC_BATTERY_VOLTAGE_CHANNEL)       | \
-	 (1 << ADC_BATTERY_CURRENT_CHANNEL)       | \
-	 (1 << ADC_SCALED_V5_CHANNEL)             | \
-	 (1 << ADC_RC_RSSI_CHANNEL))
-
-/* HW has to large of R termination on ADC todo:change when HW value is chosen */
-#define BOARD_ADC_OPEN_CIRCUIT_V     (5.6f)
-
-/* CAN Silence: Silent mode control */
-#define GPIO_CAN1_SILENT_S0  /* PF5  */ (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTF|GPIO_PIN5)
-#define GPIO_CAN2_SILENT_S0  /* PF5  */ (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTF|GPIO_PIN5)
-
-/* PWM */
-#define DIRECT_PWM_OUTPUT_CHANNELS  10
-
-/* Power supply control and monitoring GPIOs */
-#define GPIO_nPOWER_IN_A                /* PB5 */ (GPIO_INPUT|GPIO_PULLUP|GPIO_PORTB|GPIO_PIN5)
-
-#define GPIO_VDD_BRICK1_VALID          GPIO_nPOWER_IN_A /* Brick 1 Is Chosen */
-#define BOARD_NUMBER_BRICKS             1
-
-#define GPIO_VDD_3V3_SPEKTRUM_POWER_EN  /* PE4  */ (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTE|GPIO_PIN4)
-
-/* Define True logic Power Control in arch agnostic form */
-#define VDD_3V3_SPEKTRUM_POWER_EN(on_true) px4_arch_gpiowrite(GPIO_VDD_3V3_SPEKTRUM_POWER_EN, (!on_true))
-#define READ_VDD_3V3_SPEKTRUM_POWER_EN()   (px4_arch_gpioread(GPIO_VDD_3V3_SPEKTRUM_POWER_EN) == 0)
-
-/* Tone alarm output */
-#define TONE_ALARM_TIMER        2  /* timer 2 */
-#define TONE_ALARM_CHANNEL      1  /* PA15 TIM2_CH1 */
-
-#define GPIO_BUZZER_1           /* PA15 */ (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTA|GPIO_PIN15)
-
-#define GPIO_TONE_ALARM_IDLE    GPIO_BUZZER_1
-#define GPIO_TONE_ALARM         GPIO_TIM2_CH1OUT_2
-
-/* USB OTG FS */
-#define GPIO_OTGFS_VBUS         /* PA9 */ (GPIO_INPUT|GPIO_PULLDOWN|GPIO_SPEED_100MHz|GPIO_PORTA|GPIO_PIN9)
-
-/* High-resolution timer */
-#define HRT_TIMER               3  /* use timer3 for the HRT */
-#define HRT_TIMER_CHANNEL       1 /* use capture/compare channel 1 */
-
-#define HRT_PPM_CHANNEL         /* T3C3 */  3  /* use capture/compare channel 3 */
-#define GPIO_PPM_IN             /* PB0 T3C3 */ GPIO_TIM3_CH3IN_1
-
-/* RC Serial port */
-#define RC_SERIAL_PORT          "/dev/ttyS3"
-
-#define GPIO_RSSI_IN            /* PC1  */ (GPIO_INPUT|GPIO_PULLUP|GPIO_PORTC|GPIO_PIN1)
-
-/* Safety Switch: Enable the FMU to control it if there is no px4io fixme:This should be BOARD_SAFETY_LED(__ontrue) */
-#define GPIO_SAFETY_SWITCH_IN              /* PC4 */ (GPIO_INPUT|GPIO_PULLUP|GPIO_PORTC|GPIO_PIN4)
-/* Enable the FMU to use the switch it if there is no px4io fixme:This should be BOARD_SAFTY_BUTTON() */
-#define GPIO_BTN_SAFETY GPIO_SAFETY_SWITCH_IN /* Enable the FMU to control it if there is no px4io */
-
-/* Power switch controls ******************************************************/
-#define SPEKTRUM_POWER(_on_true)           VDD_3V3_SPEKTRUM_POWER_EN(_on_true)
-
-/*
- * Board has a separate RC_IN
- *
- * GPIO PPM_IN on PB0 T3CH3
- * SPEKTRUM_RX (it's TX or RX in Bind) on UART6 PC7
- *   Inversion is possible in the UART and can drive GPIO_PPM_IN as an output
- */
-#define GPIO_PPM_IN_AS_OUT             (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_SET|GPIO_PORTB|GPIO_PIN0)
-#define SPEKTRUM_RX_AS_GPIO_OUTPUT()   px4_arch_configgpio(GPIO_PPM_IN_AS_OUT)
-#define SPEKTRUM_RX_AS_UART()          /* Can be left as uart */
-#define SPEKTRUM_OUT(_one_true)        px4_arch_gpiowrite(GPIO_PPM_IN_AS_OUT, (_one_true))
-
-/* By Providing BOARD_ADC_USB_CONNECTED (using the px4_arch abstraction)
- * this board support the ADC system_power interface, and therefore
- * provides the true logic GPIO BOARD_ADC_xxxx macros.
- */
-#define BOARD_ADC_USB_CONNECTED (px4_arch_gpioread(GPIO_OTGFS_VBUS))
-#define BOARD_ADC_USB_VALID     BOARD_ADC_USB_CONNECTED
-#define BOARD_ADC_SERVO_VALID   (1) /* never powers off the Servo rail */
-#define BOARD_ADC_BRICK_VALID   (px4_arch_gpioread(GPIO_VDD_BRICK1_VALID))
-
-/* This board provides a DMA pool and APIs */
-#define BOARD_DMA_ALLOC_POOL_SIZE 5120
-
-/* This board provides the board_on_reset interface */
-#define BOARD_HAS_ON_RESET 1
-
-#define BOARD_HAS_STATIC_MANIFEST 1
-
-
-#define BOARD_NUM_IO_TIMERS 3
-
-#define BOARD_DSHOT_MOTOR_ASSIGNMENT {3, 2, 1, 0, 4, 5, 6, 7};
-
-#define BOARD_ENABLE_CONSOLE_BUFFER
-
-#define PX4_GPIO_INIT_LIST { \
-		PX4_ADC_GPIO,                     \
-		GPIO_CAN1_TX,                     \
-		GPIO_CAN1_RX,                     \
-		GPIO_CAN2_TX,                     \
-		GPIO_CAN2_RX,                     \
-		GPIO_CAN1_SILENT_S0,              \
-		GPIO_CAN2_SILENT_S0,              \
-		GPIO_nPOWER_IN_A,                 \
-		GPIO_VDD_3V3_SPEKTRUM_POWER_EN,   \
-		GPIO_TONE_ALARM_IDLE,             \
-		GPIO_SAFETY_SWITCH_IN,            \
-		GPIO_OTGFS_VBUS,                  \
-	}
-
-__BEGIN_DECLS
-#ifndef __ASSEMBLY__
-
-extern void stm32_spiinitialize(void);
-extern void board_peripheral_reset(int ms);
-
-#include <px4_platform_common/board_common.h>
-#endif /* __ASSEMBLY__ */
-__END_DECLS
@@ -1,135 +0,0 @@
-/****************************************************************************
- *
- *   Copyright (C) 2020 PX4 Development Team. All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- * 3. Neither the name PX4 nor the names of its contributors may be
- *    used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ****************************************************************************/
-
-#pragma once
-
-/****************************************************************************
- * 10-8--2016:
- *  To simplify the ripple effect on the tools, we will be using
- *  /dev/serial/by-id/<asterisk>PX4<asterisk> to locate PX4 devices. Therefore
- *  moving forward all Bootloaders must contain the prefix "PX4 BL "
- *  in the USBDEVICESTRING
- *  This Change will be made in an upcoming BL release
- ****************************************************************************/
-/*
- * Define usage to configure a bootloader
- *
- *
- * Constant                example          Usage
- * APP_LOAD_ADDRESS     0x08004000            - The address in Linker Script, where the app fw is org-ed
- * BOOTLOADER_DELAY     5000                  - Ms to wait while under USB pwr or bootloader request
- * BOARD_FMUV2
- * INTERFACE_USB        1                     - (Optional) Scan and use the USB interface for bootloading
- * INTERFACE_USART      1                     - (Optional) Scan and use the Serial interface for bootloading
- * USBDEVICESTRING      "PX4 BL FMU v2.x"     - USB id string
- * USBPRODUCTID         0x0011                - PID Should match defconfig
- * BOOT_DELAY_ADDRESS   0x000001a0            - (Optional) From the linker script from Linker Script to get a custom
- *                                               delay provided by an APP FW
- * BOARD_TYPE           9                     - Must match .prototype boad_id
- * _FLASH_KBYTES        (*(uint16_t *)0x1fff7a22) - Run time flash size detection
- * BOARD_FLASH_SECTORS  ((_FLASH_KBYTES == 0x400) ? 11 : 23) - Run time determine the physical last sector
- * BOARD_FLASH_SECTORS   11                   - Hard coded zero based last sector
- * BOARD_FLASH_SIZE     (_FLASH_KBYTES*1024)-   Total Flash size of device, determined at run time.
- *                         (1024 * 1024)      - Hard coded Total Flash of device - The bootloader and app reserved will be deducted
- *                                              programmatically
- *
- * BOARD_FIRST_FLASH_SECTOR_TO_ERASE  2        - Optional sectors index in the flash_sectors table  (F4 only), to begin erasing.
- *                                               This is to allow sectors to be reserved for app fw usage. That will NOT be erased
- *                                               during a FW upgrade.
- *                                               The default is 0, and selects the first sector to be erased, as the 0th entry in the
- *                                               flash_sectors table. Which is the second physical sector of FLASH in the device.
- *                                               The first physical sector of FLASH is used by the bootloader, and is not defined
- *                                               in the table.
- *
- * APP_RESERVATION_SIZE (BOARD_FIRST_FLASH_SECTOR_TO_ERASE * 16 * 1024) - Number of bytes reserved by the APP FW. This number plus
- *                                                                        BOOTLOADER_RESERVATION_SIZE  will be deducted from
- *                                                                        BOARD_FLASH_SIZE to determine the size of the App FW
- *                                                                        and hence the address space of FLASH to erase and program.
- * USBMFGSTRING            "PX4 AP"            - Optional USB MFG string (default is '3D Robotics' if not defined.)
- * SERIAL_BREAK_DETECT_DISABLED                -  Optional prevent break selection on Serial port from entering or staying in BL
- *
- * * Other defines are somewhat self explanatory.
- */
-
-/* Boot device selection list*/
-#define USB0_DEV       0x01
-#define SERIAL0_DEV    0x02
-#define SERIAL1_DEV    0x04
-
-#define APP_LOAD_ADDRESS               0x08020000
-#define BOOTLOADER_DELAY               5000
-#define INTERFACE_USB                  1
-#define INTERFACE_USB_CONFIG           "/dev/ttyACM0"
-#define BOARD_VBUS                     MK_GPIO_INPUT(GPIO_OTGFS_VBUS)
-
-//#define USE_VBUS_PULL_DOWN
-#define INTERFACE_USART                1
-#define INTERFACE_USART_CONFIG         "/dev/ttyS0,115200"
-#define BOOT_DELAY_ADDRESS             0x000001a0
-#define BOARD_TYPE                     1024
-#define _FLASH_KBYTES                  (*(uint32_t *)0x1FF1E880)
-#define BOARD_FLASH_SECTORS            (15)
-#define BOARD_FLASH_SIZE               (_FLASH_KBYTES * 1024)
-
-#define OSC_FREQ                       24
-
-#define BOARD_PIN_LED_ACTIVITY         GPIO_nLED_RED
-#define BOARD_PIN_LED_BOOTLOADER       GPIO_nLED_RED
-#define BOARD_LED_ON                   0
-#define BOARD_LED_OFF                  1
-
-#define SERIAL_BREAK_DETECT_DISABLED   1
-
-#if !defined(ARCH_SN_MAX_LENGTH)
-# define ARCH_SN_MAX_LENGTH 12
-#endif
-
-#if !defined(APP_RESERVATION_SIZE)
-#  define APP_RESERVATION_SIZE 0
-#endif
-
-#if !defined(BOARD_FIRST_FLASH_SECTOR_TO_ERASE)
-#  define BOARD_FIRST_FLASH_SECTOR_TO_ERASE 1
-#endif
-
-#if !defined(USB_DATA_ALIGN)
-# define USB_DATA_ALIGN
-#endif
-
-#ifndef BOOT_DEVICES_SELECTION
-#  define BOOT_DEVICES_SELECTION USB0_DEV|SERIAL0_DEV|SERIAL1_DEV
-#endif
-
-#ifndef BOOT_DEVICES_FILTER_ONUSB
-#  define BOOT_DEVICES_FILTER_ONUSB USB0_DEV|SERIAL0_DEV|SERIAL1_DEV
-#endif
@@ -1,96 +0,0 @@
-/****************************************************************************
- *
- *   Copyright (c) 2019 PX4 Development Team. All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- * 3. Neither the name PX4 nor the names of its contributors may be
- *    used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ****************************************************************************/
-#pragma once
-
-
-#include "hw_description_stm_common.h"
-
-static inline constexpr uint32_t getTimerUpdateDMAMap(Timer::Timer timer, const DMA &dma)
-{
-	uint32_t dma_map = 0;
-
-	switch (timer) {
-	case Timer::Timer1:
-		dma_map = (dma.index == DMA::Index1) ? DMAMAP_DMA12_TIM1UP_0 : DMAMAP_DMA12_TIM1UP_1;
-		break;
-
-	case Timer::Timer2:
-		dma_map = (dma.index == DMA::Index1) ? DMAMAP_DMA12_TIM2UP_0 : DMAMAP_DMA12_TIM2UP_1;
-
-		break;
-
-	case Timer::Timer3:
-		dma_map = (dma.index == DMA::Index1) ? DMAMAP_DMA12_TIM3UP_0 : DMAMAP_DMA12_TIM3UP_1;
-
-		break;
-
-	case Timer::Timer4:
-		dma_map = (dma.index == DMA::Index1) ? DMAMAP_DMA12_TIM4UP_0 : DMAMAP_DMA12_TIM4UP_1;
-
-		break;
-
-	case Timer::Timer5:
-		dma_map = (dma.index == DMA::Index1) ? DMAMAP_DMA12_TIM5UP_0 : DMAMAP_DMA12_TIM5UP_1;
-
-		break;
-
-	case Timer::Timer6:
-		dma_map = (dma.index == DMA::Index1) ? DMAMAP_DMA12_TIM6UP_0 : DMAMAP_DMA12_TIM6UP_1;
-
-		break;
-
-	case Timer::Timer7:
-		dma_map = (dma.index == DMA::Index1) ? DMAMAP_DMA12_TIM7UP_0 : DMAMAP_DMA12_TIM7UP_1;
-
-		break;
-
-	case Timer::Timer8:
-		dma_map = (dma.index == DMA::Index1) ? DMAMAP_DMA12_TIM8UP_0 : DMAMAP_DMA12_TIM8UP_1;
-
-		break;
-
-	case Timer::Timer9:
-	case Timer::Timer10:
-	case Timer::Timer11:
-	case Timer::Timer12:
-	case Timer::Timer13:
-	case Timer::Timer14:
-	case Timer::Timer15:
-//		dma_map = (dma.index == DMA::Index2) ? DMAMAP_DMA12_TIM15UP_0 : DMAMAP_DMA12_TIM15UP_1;
-
-		break;
-	}
-
-	constexpr_assert(dma_map != 0, "Invalid DMA config for given timer");
-	return dma_map;
-}
@@ -1,40 +0,0 @@
-/****************************************************************************
- *
- *   Copyright (C) 2020 PX4 Development Team. All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- * 3. Neither the name PX4 nor the names of its contributors may be
- *    used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ****************************************************************************/
-
-#include <px4_arch/i2c_hw_description.h>
-
-constexpr px4_i2c_bus_t px4_i2c_buses[I2C_BUS_MAX_BUS_ITEMS] = {
-	initI2CBusExternal(1),
-	initI2CBusExternal(3),
-	initI2CBusExternal(4),
-};
--- a/Show More
+++ b/Show More