battery: improve remaining flight time estimation

makes the remaining flight time estimation based on SoC and it's derivative  s.t. it also works without setting battery capacity

.github/workflows/build_all_targets.yml

@@ -16,11 +16,13 @@ on:
       - 'release/**'
     paths-ignore:
       - 'docs/**'
+      - '.github/**'
   pull_request:
     branches:
-      - '**'
+      - '*'
     paths-ignore:
       - 'docs/**'
+      - '.github/**'
 
 jobs:
   group_targets:

.github/workflows/checks.yml

@@ -9,7 +9,7 @@ on:
       - '.github/**'
   pull_request:
     branches:
-      - '**'
+    - '*'
     paths-ignore:
       - 'docs/**'
       - '.github/**'

.github/workflows/clang-tidy.yml

@@ -9,7 +9,7 @@ on:
       - '.github/**'
   pull_request:
     branches:
-      - '**'
+    - '*'
     paths-ignore:
       - 'docs/**'
       - '.github/**'

.github/workflows/compile_macos.yml

@@ -9,14 +9,14 @@ on:
       - '.github/**'
   pull_request:
     branches:
-      - '**'
+    - '*'
     paths-ignore:
       - 'docs/**'
       - '.github/**'
 
 jobs:
   build:
-    runs-on: macos-14
+    runs-on: macos-latest
     strategy:
       matrix:
         config: [
@@ -32,8 +32,7 @@ jobs:
     - uses: actions/checkout@v4
 
     - name: setup
-      run: |
-        ./Tools/setup/macos.sh
+      run: ./Tools/setup/macos.sh; ./Tools/setup/macos.sh
 
     - name: Prepare ccache timestamp
       id: ccache_cache_timestamp
@@ -41,14 +40,12 @@ jobs:
       run: |
         string(TIMESTAMP current_date "%Y-%m-%d-%H;%M;%S" UTC)
         message("::set-output name=timestamp::${current_date}")
-
     - name: ccache cache files
       uses: actions/cache@v4
       with:
         path: ~/.ccache
         key: macos_${{matrix.config}}-ccache-${{steps.ccache_cache_timestamp.outputs.timestamp}}
         restore-keys: macos_${{matrix.config}}-ccache-
-
     - name: setup ccache
       run: |
           mkdir -p ~/.ccache

.github/workflows/compile_ubuntu.yml

@@ -12,7 +12,7 @@ on:
       - '.github/**'
   pull_request:
     branches:
-      - '**'
+      - '*'
     paths-ignore:
       - 'docs/**'
       - '.github/**'

.github/workflows/dev_container.yml

@@ -15,7 +15,7 @@ on:
       - '.github/**'
   pull_request:
     branches:
-      - '**'
+      - '*'
     paths-ignore:
       - 'docs/**'
       - '.github/**'

.github/workflows/docs_crowdin_download.yml

@@ -41,7 +41,7 @@ jobs:
           pull_request_base_branch_name: 'main'
           pull_request_title: New PX4 guide translations (Crowdin) - ${{ matrix.lc }}
           pull_request_body: 'New PX4 guide Crowdin translations by [Crowdin GH Action](https://github.com/crowdin/github-action) for ${{ matrix.lc }}'
-          pull_request_labels: 'Documentation 📑'
+          pull_request_labels: Documentation
           pull_request_reviewers: hamishwillee
           download_language: ${{ matrix.lc }}
         env:

.github/workflows/docs_deploy.yml

@@ -1,6 +1,18 @@
 name: Docs - Deploy PX4 User Guide
 
 on:
+  push:
+    branches:
+      - 'main'
+      - 'release/**'
+    paths:
+      - 'docs/en/**'
+  pull_request:
+    branches:
+      - '*'
+    paths:
+      - 'docs/en/**'
+
   # Allows you to run this workflow manually from the Actions tab
   workflow_dispatch:
 
@@ -67,21 +79,16 @@ jobs:
 
       - name: Deploy
         run: |
-          git clone --single-branch --branch main --depth 1 https://${{ secrets.PX4BUILTBOT_PERSONAL_ACCESS_TOKEN }}@github.com/PX4/docs.px4.io.git
-          # make it an orphan branch
+          git clone --single-branch --branch main https://${{ secrets.PX4BUILTBOT_PERSONAL_ACCESS_TOKEN }}@github.com/PX4/docs.px4.io.git
+          rm -rf docs.px4.io/${BRANCH_NAME}
+          mkdir -p docs.px4.io/${BRANCH_NAME}
+          cp -r ~/_book/* docs.px4.io/${BRANCH_NAME}/
           cd docs.px4.io
-          CURRENT_DATETIME=$(date +'%Y%m%d_%H_%M')
-          git checkout --orphan "${CURRENT_DATETIME}_main"
-          rm -rf ${BRANCH_NAME}
-          mkdir -p ${BRANCH_NAME}
-          cp -r ~/_book/* ${BRANCH_NAME}/
           git config --global user.name "${{ secrets.PX4BUILDBOT_USER }}"
           git config --global user.email "${{ secrets.PX4BUILDBOT_EMAIL }}"
-          git add .
+          git add ${BRANCH_NAME}
           git commit -a -m "PX4 docs build update (vitepress) `date`"
-          # push branch as backup
-          git push origin "${CURRENT_DATETIME}_main"
-          # Now make main from backup and push updated
-          git branch -D main
-          git checkout -b main
+          #git add .
+          #git commit --amend -m "PX4 docs build update (vitepress) `date`"
+          #git commit --allow-empty -m "Empty commit to force rebuild"
           git push origin main -f

.github/workflows/docs_deploy_aws.yml

@@ -1,114 +0,0 @@
-name: Docs - Deploy PX4 User Guide to AWS
-
-on:
-  push:
-    branches:
-      - "main"
-      - "release/**"
-    paths:
-      - "docs/en/**"
-      - "docs/zh/**"
-      - "docs/uk/**"
-      - "docs/ko/**"
-  pull_request:
-    paths:
-      - "docs/en/**"
-      - "docs/zh/**"
-      - "docs/uk/**"
-      - "docs/ko/**"
-
-permissions:
-  contents: read
-  actions: read
-  id-token: write # for AWS OIDC
-
-concurrency:
-  group: docs-deploy
-  cancel-in-progress: false
-
-jobs:
-  build:
-    runs-on: [runs-on,runner=8cpu-linux-x64,image=ubuntu24-full-x64,"run-id=${{ github.run_id }}",spot=false,extras=s3-cache]
-    outputs:
-      branchname: ${{ steps.set-branch.outputs.branchname }}
-      releaseversion: ${{ steps.set-version.outputs.releaseversion }}
-    steps:
-      - uses: runs-on/action@v1
-
-      - name: Checkout
-        uses: actions/checkout@v4
-
-      - id: set-branch
-        run: echo "branchname=${GITHUB_HEAD_REF:-${GITHUB_REF#refs/heads/}}" >> $GITHUB_OUTPUT
-
-      - id: set-version
-        run: |
-          branch="${{ steps.set-branch.outputs.branchname }}"
-          if [[ "$branch" == "main" ]]; then
-            version="main"
-          else
-            version="v${branch#release/}"
-          fi
-          echo "releaseversion=$version" >> $GITHUB_OUTPUT
-
-      - name: Setup Node
-        uses: actions/setup-node@v4
-        with:
-          node-version: 20
-          cache: npm
-          cache-dependency-path: ./docs/yarn.lock
-
-      - name: Install dependencies
-        run: yarn install --frozen-lockfile --cwd ./docs
-
-      - name: Build with VitePress
-        working-directory: ./docs
-        env:
-          BRANCH_NAME: ${{ steps.set-version.outputs.releaseversion }}
-        run: |
-          npm run docs:build_ubuntu
-          touch .vitepress/dist/.nojekyll
-          npm run docs:sitemap
-
-      - name: Upload artifact
-        if: ${{ github.event_name == 'push' || (github.event_name == 'pull_request' && github.event.pull_request.merged) || github.event_name == 'workflow_dispatch' }}
-        uses: actions/upload-artifact@v4
-        with:
-          name: px4_docs_build
-          path: docs/.vitepress/dist/
-          retention-days: 1
-
-  deploy:
-    if: ${{ github.event_name == 'push' || (github.event_name == 'pull_request' && github.event.pull_request.merged) || github.event_name == 'workflow_dispatch' }}
-    needs: build
-    runs-on: ubuntu-latest
-
-    steps:
-      - name: Download Artifact
-        uses: actions/download-artifact@v4
-        with:
-          name: px4_docs_build
-          path: ~/_book
-
-      - name: Configure AWS from OIDC
-        uses: aws-actions/configure-aws-credentials@v4
-        with:
-          role-to-assume: ${{ secrets.AWS_ROLE_ARN }}
-          aws-region: us-west-2
-
-      - name: Sanity check AWS credentials
-        run: aws sts get-caller-identity
-
-      - name: Upload HTML with short cache
-        run: |
-          aws s3 sync ~/_book/ s3://px4-docs/${{ needs.build.outputs.releaseversion }}/ \
-            --delete \
-            --exclude "*" --include "*.html" \
-            --cache-control "public, max-age=60"
-
-      - name: Upload assets with long cache
-        run: |
-          aws s3 sync ~/_book/ s3://px4-docs/${{ needs.build.outputs.releaseversion }}/ \
-            --delete \
-            --exclude "*.html" \
-            --cache-control "public, max-age=86400, immutable"

.github/workflows/docs_flaw_checker.yml

@@ -21,13 +21,13 @@ jobs:
       - name: Install Node.js
         uses: actions/setup-node@v3
         with:
-          node-version: '18'
+          node-version: '16'
 
       - name: Create logs directory
         run: |
           mkdir logs
 
-      - name: Get changed english doc files
+      - name: Get changed english files
         id: get_changed_markdown_english
         uses: tj-actions/changed-files@v35.9.2
         with:
@@ -48,10 +48,10 @@ jobs:
       - name: Run link checker
         id: link-check
         run: |
-          npm -g install markdown_link_checker_sc@0.0.138
-          markdown_link_checker_sc -r ${{ github.workspace }} -d docs -e en -f ./logs/prFiles.json -i assets -u docs.px4.io/main/ > ./logs/errorsFilteredByPrPages.md
+          npm -g install markdown_link_checker_sc@0.0.134
+          markdown_link_checker_sc -r ${{ github.workspace }} -d en -f ./docs/logs/prFiles.json -i assets -u docs.px4.io/main/ > ./docs/logs/errorsFilteredByPrPages.md
           mkdir -p ./pr
-          cp ./logs/errorsFilteredByPrPages.md ./pr/errorsFilteredByPrPages.md
+          cp ./docs/logs/errorsFilteredByPrPages.md ./pr/errorsFilteredByPrPages.md
 
       - name: Read errorsFilteredByPrPages.md file
         id: read-errors-by-page

.github/workflows/ekf_functional_change_indicator.yml

@@ -3,7 +3,7 @@ name: EKF Change Indicator
 on:
   pull_request:
     branches:
-      - '**'
+    - '*'
     paths-ignore:
       - 'docs/**'
       - '.github/**'

.github/workflows/failsafe_sim.yml

@@ -9,7 +9,7 @@ on:
       - '.github/**'
   pull_request:
     branches:
-      - '**'
+    - '*'
     paths-ignore:
       - 'docs/**'
       - '.github/**'
@@ -43,7 +43,6 @@ jobs:
         run: |
           git clone https://github.com/emscripten-core/emsdk.git _emscripten_sdk
           cd _emscripten_sdk
-          git checkout 4.0.15
           ./emsdk install latest
           ./emsdk activate latest
 

.github/workflows/flash_analysis.yml

@@ -14,7 +14,7 @@ on:
       - '.github/**'
   pull_request:
     branches:
-      - '**'
+      - '*'
     paths-ignore:
       - 'docs/**'
       - '.github/**'

.github/workflows/mavros_mission_tests.yml

@@ -9,7 +9,7 @@ on:
       - '.github/**'
   pull_request:
     branches:
-      - '**'
+    - '*'
     paths-ignore:
       - 'docs/**'
       - '.github/**'

.github/workflows/mavros_offboard_tests.yml

@@ -9,7 +9,7 @@ on:
       - '.github/**'
   pull_request:
     branches:
-    - '**'
+    - '*'
     paths-ignore:
       - 'docs/**'
       - '.github/**'

.github/workflows/nuttx_env_config.yml

@@ -9,7 +9,7 @@ on:
       - '.github/**'
   pull_request:
     branches:
-      - '**'
+    - '*'
     paths-ignore:
       - 'docs/**'
       - '.github/**'

.github/workflows/python_checks.yml

@@ -9,7 +9,7 @@ on:
       - '.github/**'
   pull_request:
     branches:
-    - '**'
+    - '*'
     paths-ignore:
       - 'docs/**'
       - '.github/**'

.github/workflows/ros_integration_tests.yml

@@ -1,127 +0,0 @@
-# NOTE: this workflow is now running on Dronecode / PX4 AWS account.
-# - If you want to keep the tests running in GitHub Actions you need to uncomment the "runs-on: ubuntu-latest" lines
-#   and comment the "runs-on: [runs-on,runner=..." lines.
-# - If you would like to duplicate this setup try setting up "RunsOn" on your own AWS account try https://runs-on.com
-
-name: ROS Integration Tests
-
-on:
-  push:
-    branches:
-    - 'main'
-    paths-ignore:
-      - 'docs/**'
-  pull_request:
-    branches:
-      - '**'
-    paths-ignore:
-      - 'docs/**'
-
-jobs:
-  build:
-    runs-on: [runs-on,runner=16cpu-linux-x64,image=ubuntu22-full-x64,"run-id=${{ github.run_id }}",spot=false]
-    container:
-      image: px4io/px4-dev-ros2-galactic:2021-09-08
-      options: --privileged --ulimit core=-1 --security-opt seccomp=unconfined
-    steps:
-    - uses: actions/checkout@v4
-      with:
-        fetch-depth: 0
-
-    - name: Git Ownership Workaround
-      run: git config --system --add safe.directory '*'
-
-    - name: Update ROS Keys
-      run: |
-        sudo rm /etc/apt/sources.list.d/ros2.list && \
-        sudo curl -sSL https://raw.githubusercontent.com/ros/rosdistro/master/ros.key -o /usr/share/keyrings/ros-archive-keyring.gpg && \
-        echo "deb [arch=$(dpkg --print-architecture) signed-by=/usr/share/keyrings/ros-archive-keyring.gpg] http://packages.ros.org/ros2/ubuntu $(. /etc/os-release && echo $UBUNTU_CODENAME) main" | sudo tee /etc/apt/sources.list.d/ros2.list > /dev/null
-
-    - name: Install gazebo
-      run: |
-        apt update && apt install -y gazebo11 libgazebo11-dev gstreamer1.0-plugins-bad gstreamer1.0-plugins-base gstreamer1.0-plugins-good gstreamer1.0-plugins-ugly libgstreamer-plugins-base1.0-dev
-
-    - name: Prepare ccache timestamp
-      id: ccache_cache_timestamp
-      shell: cmake -P {0}
-      run: |
-        string(TIMESTAMP current_date "%Y-%m-%d-%H;%M;%S" UTC)
-        message("::set-output name=timestamp::${current_date}")
-    - name: ccache cache files
-      uses: actions/cache@v4
-      with:
-        path: ~/.ccache
-        key: ros_integration_tests-${{matrix.config.build_type}}-ccache-${{steps.ccache_cache_timestamp.outputs.timestamp}}
-        restore-keys: ros_integration_tests-${{matrix.config.build_type}}-ccache-
-    - name: setup ccache
-      run: |
-        mkdir -p ~/.ccache
-        echo "base_dir = ${GITHUB_WORKSPACE}" > ~/.ccache/ccache.conf
-        echo "compression = true" >> ~/.ccache/ccache.conf
-        echo "compression_level = 6" >> ~/.ccache/ccache.conf
-        echo "max_size = 300M" >> ~/.ccache/ccache.conf
-        echo "hash_dir = false" >> ~/.ccache/ccache.conf
-        ccache -s
-        ccache -z
-
-    - name: Get and build micro-xrce-dds-agent
-      run: |
-        cd /opt
-        git clone --recursive https://github.com/eProsima/Micro-XRCE-DDS-Agent.git
-        cd Micro-XRCE-DDS-Agent
-        git checkout v2.2.1 # recent versions require cmake 3.22, but px4-dev-ros2-galactic:2021-09-08 is on 3.16
-        sed -i 's/_fastdds_tag 2.8.x/_fastdds_tag 2.8.2/g' CMakeLists.txt
-        mkdir build
-        cd build
-        cmake ..
-        make -j2
-    - name: ccache post-run micro-xrce-dds-agent
-      run: ccache -s
-
-    - name: Get and build the ros2 interface library
-      shell: bash
-      run: |
-        PX4_DIR="$(pwd)"
-        . /opt/ros/galactic/setup.bash
-        mkdir -p /opt/px4_ws/src
-        cd /opt/px4_ws/src
-        git clone --recursive --branch release/1.16 https://github.com/Auterion/px4-ros2-interface-lib.git
-        cd ..
-        # Copy messages to ROS workspace
-        "${PX4_DIR}/Tools/copy_to_ros_ws.sh" "$(pwd)"
-        rm -rf src/translation_node src/px4_msgs_old
-        colcon build --symlink-install
-    - name: ccache post-run ros workspace
-      run: ccache -s
-
-    - name: Build PX4
-      run: make px4_sitl_default
-    - name: ccache post-run px4/firmware
-      run: ccache -s
-    - name: Build SITL Gazebo
-      run: make px4_sitl_default sitl_gazebo-classic
-    - name: ccache post-run sitl_gazebo-classic
-      run: ccache -s
-
-    - name: Core dump settings
-      run: |
-        ulimit -c unlimited
-        echo "`pwd`/%e.core" > /proc/sys/kernel/core_pattern
-
-    - name: Run tests
-      shell: bash
-      run: |
-        . /opt/px4_ws/install/setup.bash
-        /opt/Micro-XRCE-DDS-Agent/build/MicroXRCEAgent udp4 localhost -p 8888 -v 0 &
-        test/ros_test_runner.py --verbose --model iris --upload --force-color
-      timeout-minutes: 45
-
-    - name: Upload failed logs
-      if: failure()
-      uses: actions/upload-artifact@v4
-      with:
-        name: failed-logs.zip
-        path: |
-          logs/**/**/**/*.log
-          logs/**/**/**/*.ulg
-          build/px4_sitl_default/tmp_ros_tests/rootfs/log/**/*.ulg

.github/workflows/ros_translation_node.yml

@@ -8,7 +8,7 @@ on:
       - '.github/**'
   pull_request:
     branches:
-      - '**'
+    - '*'
     paths-ignore:
       - 'docs/**'
       - '.github/**'

.github/workflows/sitl_tests.yml

@@ -14,7 +14,7 @@ on:
       - '.github/**'
   pull_request:
     branches:
-      - '**'
+    - '*'
     paths-ignore:
       - 'docs/**'
       - '.github/**'
@@ -116,7 +116,7 @@ jobs:
           PX4_HOME_LON: ${{matrix.config.longitude}}
           PX4_HOME_ALT: ${{matrix.config.altitude}}
           PX4_CMAKE_BUILD_TYPE: ${{matrix.config.build_type}}
-        run: test/mavsdk_tests/mavsdk_test_runner.py --speed-factor 10 --abort-early --model ${{matrix.config.model}} --upload test/mavsdk_tests/configs/sitl.json --verbose --force-color
+        run: test/mavsdk_tests/mavsdk_test_runner.py --speed-factor 10 --abort-early --model ${{matrix.config.model}} --upload test/mavsdk_tests/configs/sitl.json --verbose
         timeout-minutes: 45
 
       - name: Upload failed logs

.gitignore

@@ -108,4 +108,3 @@ src/systemcmds/topic_listener/listener_generated.cpp
 
 # colcon
 log/
-keys/

.vscode/cmake-variants.yaml

@@ -231,11 +231,6 @@ CONFIG:
       buildType: MinSizeRel
       settings:
         CONFIG: bitcraze_crazyflie_default
-    bluerobotics_navigator_default:
-      short: bluerobotics_navigator
-      buildType: MinSizeRel
-      settings:
-        CONFIG: bluerobotics_navigator_default
     cuav_can-gps-v1_default:
       short: cuav_can-gps-v1_default
       buildType: MinSizeRel
@@ -301,11 +296,6 @@ CONFIG:
       buildType: MinSizeRel
       settings:
         CONFIG: holybro_durandal-v1_default
-    holybro_kakuteh7-wing_default:
-      short: holybro_kakuteh7-wing
-      buildType: MinSizeRel
-      settings:
-        CONFIG: holybro_kakuteh7-wing_default
     matek_h743-slim_default:
       short: matek_h743-slim
       buildType: MinSizeRel

ROMFS/px4fmu_common/init.d-posix/airframes/4009_gz_r1_rover

@@ -37,8 +37,8 @@ param set-default RO_YAW_P 5
 
 # Rover Position Control Parameters
 param set-default RO_SPEED_LIM 2
-param set-default RO_SPEED_I 0.01
-param set-default RO_SPEED_P 0.1
+param set-default RO_SPEED_I 0.5
+param set-default RO_SPEED_P 1
 
 # Pure Pursuit parameters
 param set-default PP_LOOKAHD_GAIN 1

ROMFS/px4fmu_common/init.d-posix/px4-rc.gzsim

@@ -28,15 +28,11 @@ else
     exit 1
 fi
 
-# Look for an already running world
-get_gz_world() {
-	gz_world=$( ${gz_command} topic -l | grep -m 1 -e "^/world/.*/clock" | sed 's/\/world\///g; s/\/clock//g' )
-}
-
 # If not standalone
 if [ -z "${PX4_GZ_STANDALONE}" ]; then
 
-	get_gz_world
+	# Look for an already running world
+	gz_world=$( ${gz_command} topic -l | grep -m 1 -e "^/world/.*/clock" | sed 's/\/world\///g; s/\/clock//g' )
 
 	# shellcheck disable=SC2153
 	if [ -z "${gz_world}" ] && [ -n "${PX4_GZ_WORLD}" ]; then
@@ -70,13 +66,6 @@ fi
 
 # Wait for Gazebo world to be ready before proceeding
 check_scene_info() {
-
-	get_gz_world
-
-	if [ -n "${PX4_GZ_STANDALONE}" ] && [ -n "${gz_world}" ]; then
-		PX4_GZ_WORLD=${gz_world}
-	fi
-
 	SERVICE_INFO=$(${gz_command} service -i --service "/world/${PX4_GZ_WORLD}/scene/info" 2>&1)
 	if echo "$SERVICE_INFO" | grep -q "Service providers"; then
 		return 0

ROMFS/px4fmu_common/init.d-posix/rcS

@@ -126,15 +126,6 @@ then
 	set AUTOCNF yes
 fi
 
-# Allow overriding parameters via env variables: export PX4_PARAM_{name}={value}
-env | while IFS='=' read -r line; do
-  value=${line#*=}
-  name=${line%%=*}
-  case $name in
-    "PX4_PARAM_"*) param set "${name#PX4_PARAM_}" "$value" ;;
-  esac
-done
-
 # multi-instance setup
 # shellcheck disable=SC2154
 param set MAV_SYS_ID $((px4_instance+1))
@@ -190,9 +181,6 @@ param set-default SYS_FAILURE_EN 1
 # does not go below 50% by default, but failure injection can trigger failsafes.
 param set-default COM_LOW_BAT_ACT 3
 
-# set default IP to localhost
-param set-default UXRCE_DDS_AG_IP 2130706433  # 127.0.0.1
-
 
 # Adapt timeout parameters if simulation runs faster or slower than realtime.
 if [ -n "$PX4_SIM_SPEED_FACTOR" ]; then
@@ -317,7 +305,7 @@ then
 	uxrce_dds_port="$PX4_UXRCE_DDS_PORT"
 fi
 
-uxrce_dds_client start -t udp -p $uxrce_dds_port $uxrce_dds_ns
+uxrce_dds_client start -t udp -h 127.0.0.1 -p $uxrce_dds_port $uxrce_dds_ns
 
 if param greater -s MNT_MODE_IN -1
 then
@@ -340,7 +328,11 @@ then
 	gyro_calibration start
 fi
 
-payload_deliverer start
+# Payload deliverer module if gripper is enabled
+if param compare -s PD_GRIPPER_EN 1
+then
+	payload_deliverer start
+fi
 
 if param compare -s ICE_EN 1
 then

ROMFS/px4fmu_common/init.d/airframes/50001_aion_robotics_r1_rover

@@ -37,14 +37,14 @@ param set-default RO_JERK_LIM 5
 param set-default RO_MAX_THR_SPEED 1.9
 
 # Rover Rate Control Parameters
-param set-default RO_YAW_RATE_I 0.1
+param set-default RO_YAW_RATE_I 0.01
 param set-default RO_YAW_RATE_P 0.1
 param set-default RO_YAW_RATE_LIM 250
 param set-default RO_YAW_ACCEL_LIM 600
 param set-default RO_YAW_DECEL_LIM 600
 
 # Rover Attitude Control Parameters
-param set-default RO_YAW_P 2.5
+param set-default RO_YAW_P 5
 
 # Rover Position Control Parameters
 param set-default RO_SPEED_LIM 1.6

ROMFS/px4fmu_common/init.d/airframes/51001_axial_scx10_2_trail_honcho

@@ -30,12 +30,12 @@ param set-default RO_JERK_LIM 20
 param set-default RO_MAX_THR_SPEED 2.8
 
 # Rover Rate Control Parameters
-param set-default RO_YAW_RATE_I 0.1
-param set-default RO_YAW_RATE_P 0.1
-param set-default RO_YAW_RATE_LIM 120
+param set-default RO_YAW_RATE_I 0
+param set-default RO_YAW_RATE_P 0
+param set-default RO_YAW_RATE_LIM 0
 
 # Rover Attitude Control Parameters
-param set-default RO_YAW_P 2.5
+param set-default RO_YAW_P 0
 
 # Rover Position Control Parameters
 param set-default RO_SPEED_LIM 2.5

ROMFS/px4fmu_common/init.d/rc.sensors

@@ -71,6 +71,12 @@ then
 fi
 
 
+# Heater driver for temperature regulated IMUs.
+if param compare -s SENS_EN_THERMAL 1
+then
+	heater start
+fi
+
 # Teraranger one tof sensor
 if param greater -s SENS_EN_TRANGER 0
 then
@@ -226,7 +232,10 @@ then
 
 	# compasses
 	hmc5883 -T -X -q start
-	iis2mdc -X -q start
+	if ! iis2mdc -X -q start
+	then
+		lis2mdl -X -q start
+	fi
 	ist8308 -X -q start
 	ist8310 -X -q start
 	if ! lis3mdl -X -q start

ROMFS/px4fmu_common/init.d/rcS

@@ -404,14 +404,6 @@ else
 		fi
 	fi
 
-	# Heater driver for temperature regulated IMUs.
-	# The heater needs to start after px4io.
-	if param compare -s SENS_EN_THERMAL 1
-	then
-		heater start
-	fi
-
-
 	#
 	# RC update (map raw RC input to calibrate manual control)
 	#  start before commander
@@ -560,7 +552,11 @@ else
 		px4flow start -X &
 	fi
 
-	payload_deliverer start
+	# Payload deliverer module if gripper is enabled
+	if param compare -s PD_GRIPPER_EN 1
+	then
+		payload_deliverer start
+	fi
 
 	if param compare -s ICE_EN 1
 	then

Tools/cryptotools.py

@@ -0,0 +1,172 @@
+#!/usr/bin/env python3
+
+import nacl.encoding
+import nacl.signing
+import nacl.hash
+import struct
+import binascii
+import json
+import time
+import argparse
+from pathlib import Path
+import sys
+
+def make_public_key_h_file(signing_key,key_name):
+    """
+    This file generate the public key header file
+    to be included into the bootloader build.
+    """
+    public_key_c='\n'
+    for i,c in enumerate(signing_key.verify_key.encode(encoder=nacl.encoding.RawEncoder)):
+        public_key_c+= hex(c)
+        public_key_c+= ', '
+        if((i+1)%8==0):
+            public_key_c+= '\n'
+    with open(key_name+'.pub' ,mode='w') as f:
+        f.write("//Public key to verify signed binaries")
+        f.write(public_key_c)
+
+def make_key_file(signing_key, key_name):
+    """
+    Writes the key.json file.
+    Attention do not override your existing key files.
+    Do not publish your private key!!
+    """
+
+    key_file = Path(key_name+'.json')
+    if key_file.is_file():
+        print("ATTENTION: key.json already exists, are you sure you want to overwrite it?")
+        print("Remove file and run script again.")
+        print("Script aborted!")
+        sys.exit(1)
+
+    keys={}
+    keys["date"] = time.asctime()
+    keys["public"] = (signing_key.verify_key.encode(encoder=nacl.encoding.HexEncoder)).decode()
+    keys["private"] = binascii.hexlify(signing_key._seed).decode()
+    #print (keys)
+    with open(key_name+'.json', "w") as write_file:
+        json.dump(keys, write_file)
+    return keys
+
+def ed25519_sign(private_key, signee_bin):
+    """
+    This function creates the signature. It takes the private key and the binary file
+    and returns the tuple (signature, public key)
+    """
+
+    signing_key = nacl.signing.SigningKey(private_key, encoder=nacl.encoding.HexEncoder)
+
+    # Sign a message with the signing key
+    signed = signing_key.sign(signee_bin,encoder=nacl.encoding.RawEncoder)
+
+    # Obtain the verify key for a given signing key
+    verify_key = signing_key.verify_key
+
+    # Serialize the verify key to send it to a third party
+    verify_key_hex = verify_key.encode(encoder=nacl.encoding.HexEncoder)
+
+    return signed.signature, verify_key_hex
+
+
+def sign(bin_file_path, key_file_path=None, generated_key_file=None):
+    """
+    reads the binary file and the key file.
+    If the key file does not exist, it generates a
+    new key file.
+    """
+
+    with open(bin_file_path,mode='rb') as f:
+        signee_bin = f.read()
+        # Align to 4 bytes. Signature always starts at
+        # 4 byte aligned address, but the signee size
+        # might not be aligned
+        if len(signee_bin)%4 != 0:
+            signee_bin += bytearray(b'\xff')*(4-len(signee_bin)%4)
+
+    try:
+        with open(key_file_path,mode='r') as f:
+            keys = json.load(f)
+        #print(keys)
+    except:
+        print('ERROR: Key file',key_file_path,'not  found')
+        sys.exit(1)
+
+    signature, public_key = ed25519_sign(keys["private"], signee_bin)
+
+    # Do a sanity check. This type of signature is always 64 bytes long
+    assert len(signature) == 64
+
+    # Print out the signing information
+    print("Binary \"%s\" signed."%bin_file_path)
+    print("Signature:",binascii.hexlify(signature))
+    print("Public key:",binascii.hexlify(public_key))
+
+    return signee_bin + signature, public_key
+
+def generate_key(key_file):
+    """
+    Generate two files:
+      "key_file.pub" containing the public key in C-format to be included in the bootloader build
+      "key_file.json, containt both private and public key.
+    Do not leak or loose the key file. This is mandatory for signing
+    all future binaries you want to deploy!
+    """
+
+    # Generate a new random signing key
+    signing_key = nacl.signing.SigningKey.generate()
+     # Serialize the verify key to send it to a third party
+    verify_key_hex = signing_key.verify_key.encode(encoder=nacl.encoding.HexEncoder)
+    print("public key :",verify_key_hex)
+
+    private_key_hex=binascii.hexlify(signing_key._seed)
+    print("private key :",private_key_hex)
+
+    keys = make_key_file(signing_key,key_file)
+    make_public_key_h_file(signing_key,key_file)
+    return keys
+
+if(__name__ == "__main__"):
+
+    parser = argparse.ArgumentParser(description="""CLI tool to calculate and add signature to px4. bin files\n
+                                                  if given it takes an existing key file, else it generate new keys""",
+                                    epilog="Output: SignedBin.bin and a key.json file")
+    parser.add_argument("signee", help=".bin file to add signature", nargs='?', default=None)
+    parser.add_argument("signed", help="signed output .bin", nargs='?', default=None)
+
+    parser.add_argument("--key", help="key.json file", default="Tools/test_keys/test_keys.json")
+    parser.add_argument("--rdct", help="binary R&D certificate file", default=None)
+    parser.add_argument("--genkey", help="new generated key", default=None)
+    args = parser.parse_args()
+
+    # Only generate a key pair, don't sign
+    if args.genkey:
+        # Only create a key file, don't sign
+        generate_key(args.genkey)
+        print('New key file generated:',args.genkey)
+        sys.exit(0);
+
+    # Check that both signee and signed exist
+    if not args.signee or not args.signed:
+        print("ERROR: Must either provide file names for both signee and signed")
+        print("       or --genkey [key] to generate a new key pair")
+        sys.exit(1)
+
+    # Issue a warning when signing with testing key
+    if args.key=='Tools/test_keys/test_keys.json':
+        print("WARNING: Signing with PX4 test key")
+
+    # Sign the binary
+    signed, public_key = sign(args.signee, args.key, args.genkey)
+
+    with open(args.signed, mode='wb') as fs:
+        # Write signed binary
+        fs.write(signed)
+
+    # Append rdcert if given
+    try:
+        with open(args.rdct ,mode='rb') as f:
+            with open(args.signed, mode='ab') as fs:
+                fs.write(f.read())
+    except:
+        pass

Tools/decrypt_ulog.py

@@ -0,0 +1,91 @@
+#!/usr/bin/env python3
+
+import sys
+
+try:
+    from Crypto.Cipher import ChaCha20
+except ImportError as e:
+    print("Failed to import crypto: " + str(e))
+    print("")
+    print("You may need to install it using:")
+    print("    pip3 install --user pycryptodome")
+    print("")
+    sys.exit(1)
+
+from Crypto.PublicKey import RSA
+from Crypto.Cipher import PKCS1_OAEP
+from Crypto.Hash import SHA256
+from pathlib import Path
+import argparse
+
+
+if __name__ == "__main__":
+
+    parser = argparse.ArgumentParser(description="""CLI tool to decrypt an ulog file\n""")
+    parser.add_argument("ulog_file", help=".ulge/.ulgc, encrypted log file", nargs='?', default=None)
+    parser.add_argument("ulog_key", help=".ulgk, legacy encrypted key (give empty string '' to ignore for .ulge)", nargs='?', default=None)
+    parser.add_argument("rsa_key", help=".pem format key for decrypting the ulog key", nargs='?', default=None)
+
+    args = parser.parse_args()
+
+    # Check all arguments are given
+    if not args.rsa_key:
+        print('Need all arguments, the encrypted ulog file, key file (or empty string if not needed) and the key decryption key (.pem)')
+        sys.exit(1)
+
+    # Read the private RSA key to decrypt the cahcha key
+    with open(args.rsa_key, 'rb') as f:
+        r = RSA.importKey(f.read(), passphrase='')
+
+    if args.ulog_key == "":
+        key_data_filename = args.ulog_file
+        magic = "ULogEnc"
+    else:
+        key_data_filename = args.ulog_key
+        magic = "ULogKey"
+
+    with open(key_data_filename, 'rb') as f:
+        # Read the encrypted xchacha key and the nonce
+        ulog_key_header = f.read(22)
+
+        # Parse the header
+        try:
+            # magic
+            if not ulog_key_header.startswith(bytearray(magic.encode())):
+                print("Incorrect header magic")
+                raise Exception()
+            # version
+            if ulog_key_header[7] != 1:
+                print("Unsupported header version")
+                raise Exception()
+            # expected key exchange algorithm (RSA_OAEP)
+            if ulog_key_header[16] != 4:
+                print("Unsupported key algorithm")
+                raise Exception()
+            key_size = ulog_key_header[19] << 8 | ulog_key_header[18]
+            nonce_size = ulog_key_header[21] << 8 | ulog_key_header[20]
+            ulog_key_cipher = f.read(key_size)
+            nonce = f.read(nonce_size)
+        except:
+            print("Keydata format error")
+            sys.exit(1)
+
+    if magic == "ULogEnc":
+        data_offset = 22 + key_size + nonce_size
+    else:
+        data_offset = 0
+
+    # Decrypt the xchacha key
+    cipher_rsa = PKCS1_OAEP.new(r,SHA256)
+    ulog_key = cipher_rsa.decrypt(ulog_key_cipher)
+    #print(binascii.hexlify(ulog_key))
+
+    # Read and decrypt the ulog data
+    cipher = ChaCha20.new(key=ulog_key, nonce=nonce)
+
+    outfilename = Path(args.ulog_file).stem + ".ulog"
+    with open(args.ulog_file, 'rb') as f:
+        if data_offset > 0:
+            f.seek(data_offset)
+        with open(outfilename, 'wb') as out:
+            out.write(cipher.decrypt(f.read()))

Tools/docker_run.sh

@@ -5,8 +5,8 @@ if [ -z ${PX4_DOCKER_REPO+x} ]; then
 	if [[ $@ =~ .*px4_fmu.* ]]; then
 		# nuttx-px4fmu-v{1,2,3,4,5}
 		PX4_DOCKER_REPO="px4io/px4-dev-nuttx-focal:2022-08-12"
-	elif [[ $@ =~ .*navio2.* ]] || [[ $@ =~ .*raspberry.* ]] || [[ $@ =~ .*beaglebone.* ]] || [[ $@ =~ .*pilotpi.default ]] || [[ $@ =~ .*navigator.* ]]; then
-		# beaglebone_blue_default, emlid_navio2_default, px4_raspberrypi_default, scumaker_pilotpi_default, bluerobotics_navigator_default
+	elif [[ $@ =~ .*navio2.* ]] || [[ $@ =~ .*raspberry.* ]] || [[ $@ =~ .*beaglebone.* ]] || [[ $@ =~ .*pilotpi.default ]]; then
+		# beaglebone_blue_default, emlid_navio2_default, px4_raspberrypi_default, scumaker_pilotpi_default
 		PX4_DOCKER_REPO="px4io/px4-dev-armhf:2023-06-26"
 	elif [[ $@ =~ .*pilotpi.arm64 ]]; then
 		# scumaker_pilotpi_arm64

Tools/log_encryption/README.md

@@ -1,86 +0,0 @@
-# PX4 Log Encryption Tools
-
-Tools for generating encryption keys, building PX4 firmware with encrypted logs, downloading logs, and decrypting them.
-
-For more information see: https://docs.px4.io/main/en/dev_log/log_encryption.html
-
-## Usage
-
-1. **Get the board file**:
-   In order to use these tools you need to create an `encrypted_logs` target in your target board directory. For example:
-   ```bash
-   encrypted_logs.px4board
-   ```
-   Using `make menuconfig` you should enable these settings: `Blake2s hash algorithm`, `entropy pool` and `strong random number generator` and select `use interrupts` to feed timing randomness to the entropy pool.
-   Once you have generated the keys make sure you add them to the boardconfig.
-
-   ```bash
-   make <your_board_name>_encrypted_logs menuconfig
-   ```
-
-2. **Generate Keys**:
-   ```bash
-   cd PX4-Autopilot/Tools/log_encryption
-   python3 generate_keys.py
-   ```
-
-   Make sure you have the right key in your board file
-   ```CONFIG_PUBLIC_KEY1="../../../keys/public/public_key.pub"```
-
-3. **Build Firmware**:
-   ```bash
-   cd PX4-Autopilot
-
-   AND
-
-   make <your_board_name>_encrypted_logs
-
-   FOR INSTANCE
-   make_ark_fpv_encrypted_logs
-
-   Upload the custom firmware on your flight controller and record some logs
-   ```
-
-4. **Download Logs**:
-   ```bash
-   cd PX4-Autopilot/Tools/log_encryption
-
-   python3 download_logs.py /dev/ttyACM0 --baudrate 57600
-
-   OR
-
-   python3 download_logs.py udp:0.0.0.0:14550
-   ```
-
-   Addresses might need to be adjusted
-
-5. **Decrypt Logs**:
-   The easiest way to run this is to have your private key and encrypted logs in the following folders respectively:
-   ```bash
-   PX4-Autopilot/keys/private
-   PX4-Autopilot/logs/encrypted
-   ```
-   Then run:
-   ```bash
-   cd PX4-Autopilot/Tools/log_encryption
-
-   AND
-   # Uses default key + default folder
-   python3 decrypt_logs.py
-
-   OR
-   # Use --help to get all the options
-   python3 decrypt_logs.py --help
-   ```
-
-   Your decrypted logs can be found in:
-   ```bash
-   PX4-Autopilot/logs/decrypted
-   ```
-   Otherwise
-
-## Directory Structure
-
-- **`keys/`**: Encryption keys.
-- **`logs/encrypted/`**: Downloaded encrypted logs.
-- **`logs/decrypted/`**: Decrypted logs.

Tools/log_encryption/decrypt_logs.py

@@ -1,135 +0,0 @@
-#!/usr/bin/env python3
-
-import os
-import sys
-import argparse
-from pathlib import Path
-
-try:
-    from Crypto.Cipher import ChaCha20
-    from Crypto.PublicKey import RSA
-    from Crypto.Cipher import PKCS1_OAEP
-    from Crypto.Hash import SHA256
-except ImportError as e:
-    print("Failed to import crypto: " + str(e))
-    print("You may need to install it using:")
-    print("    pip3 install --user pycryptodome")
-    sys.exit(1)
-
-PX4_MAIN_DIR = os.path.abspath(os.path.join(os.path.dirname(__file__), "../.."))
-ENCRYPTED_LOGS_DIR = os.path.join(PX4_MAIN_DIR, "logs/encrypted")
-DECRYPTED_LOGS_DIR = os.path.join(PX4_MAIN_DIR, "logs/decrypted")
-DEFAULT_PRIVATE_KEY = os.path.join(PX4_MAIN_DIR, "keys/private/private_key.pem")
-
-def decrypt_log_file(ulog_file, private_key, output_folder):
-    """Decrypts a single encrypted log file (.ulge) and saves it as .ulg in the output folder."""
-
-    try:
-        # Read the private RSA key
-        with open(private_key, 'rb') as f:
-            key = RSA.import_key(f.read())
-
-        magic = "ULogEnc"
-        header_size = 22
-
-        with open(ulog_file, 'rb') as f:
-            # Encrypted .ulge file contains following sections:
-            # -------------------------
-            # | Header                |
-            # -------------------------
-            # | Wrapped symmetric key |
-            # -------------------------
-            # | Encrypted ulog data   |
-            # -------------------------
-            header = f.read(header_size)
-
-            # Parse the header
-            if not header.startswith(bytearray(magic.encode())):
-                print(f"Skipping {ulog_file}: Incorrect header magic")
-                return
-            if header[7] != 1:
-                print(f"Skipping {ulog_file}: Unsupported header version")
-                return
-            if header[16] != 4:
-                print(f"Skipping {ulog_file}: Unsupported key algorithm")
-                return
-
-            key_size = header[19] << 8 | header[18]
-            nonce_size = header[21] << 8 | header[20]
-            cipher = f.read(key_size)
-            nonce = f.read(nonce_size)
-
-        data_offset = header_size + key_size + nonce_size
-
-        # Try to decrypt the ChaCha key
-        cipher_rsa = PKCS1_OAEP.new(key, SHA256)
-        try:
-            ulog_key = cipher_rsa.decrypt(cipher)
-        except ValueError:
-            print(f"Skipping {ulog_file}: Incorrect decryption (wrong key)")
-            return
-
-        # Read and decrypt the log data
-        cipher = ChaCha20.new(key=ulog_key, nonce=nonce)
-
-        # Save decrypted log with .ulg extension
-        output_path = os.path.join(output_folder, Path(ulog_file).stem + ".ulg")
-        with open(ulog_file, 'rb') as f:
-            if data_offset > 0:
-                f.seek(data_offset)
-            with open(output_path, 'wb') as out:
-                out.write(cipher.decrypt(f.read()))
-
-        print(f"{output_path}")
-
-    except Exception as e:
-        print(f"Skipping {ulog_file}: Error occurred - {e}")
-
-
-def decrypt_all_logs(private_key_path, log_source_path=None):
-    """Decrypts all logs in the given folder or a single file."""
-
-    if log_source_path and os.path.isfile(log_source_path):
-        logs = [log_source_path]
-    else:
-        # Use default encrypted logs directory if not provided
-        folder = log_source_path if log_source_path else ENCRYPTED_LOGS_DIR
-        logs = [os.path.join(folder, f) for f in os.listdir(folder) if f.endswith(".ulge")]
-
-    if not logs:
-        print("No encrypted logs found.")
-        return
-
-    print(f"Found {len(logs)} encrypted log(s). Decrypting...")
-
-    os.makedirs(DECRYPTED_LOGS_DIR, exist_ok=True)
-
-    for log_path in logs:
-        decrypt_log_file(log_path, private_key_path, DECRYPTED_LOGS_DIR)
-
-
-if __name__ == "__main__":
-    parser = argparse.ArgumentParser(
-    description="Decrypt PX4 encrypted log files (.ulge) using a ChaCha20+RSA scheme.\n\n"
-                "Usage examples:\n"
-                "  python3 decrypt_logs.py /path/to/private_key.pem /path/to/custom_log.ulge\n"
-                "  python3 decrypt_logs.py /path/to/private_key.pem /path/to/folder_with_ulge_files\n"
-                "  python3 decrypt_logs.py                  # Uses default key + default log folder\n",
-    formatter_class=argparse.RawTextHelpFormatter
-    )
-
-    parser.add_argument("private_key", nargs="?", default=None,
-                        help="Path to the private RSA key (.pem). If omitted, uses default key.")
-    parser.add_argument("log_file_or_folder", nargs="?", default=None,
-                        help="Path to a single .ulge file or folder containing them. If omitted, uses default encrypted log folder.")
-
-
-    args = parser.parse_args()
-
-    private_key_path = args.private_key if args.private_key else DEFAULT_PRIVATE_KEY
-
-    if not os.path.exists(private_key_path):
-        print(f"Error: Private key file not found at {private_key_path}")
-        sys.exit(1)
-
-    decrypt_all_logs(private_key_path, args.log_file_or_folder)

Tools/log_encryption/download_logs.py

@@ -1,190 +0,0 @@
-#!/usr/bin/env python3
-
-import os
-import sys
-import time
-import shutil
-import threading
-from pymavlink import mavutil
-from argparse import ArgumentParser
-
-class MavlinkLogDownloader:
-    def __init__(self, connection_url, output_dir, baudrate=57600, source_system=254):
-        self.connection_url = connection_url
-        self.output_dir = output_dir
-        self.encrypted_dir = os.path.join(output_dir, "encrypted")
-        self.running = True
-
-        # Ensure directories exist
-        os.makedirs(self.output_dir, exist_ok=True)
-        os.makedirs(self.encrypted_dir, exist_ok=True)
-
-        # # Handle serial or UDP connections
-        if os.path.exists(connection_url):  # likely a serial device
-            self.mav = mavutil.mavlink_connection(connection_url, baud=baudrate, source_system=source_system)
-        else:
-            self.mav = mavutil.mavlink_connection(connection_url, source_system=source_system)
-
-
-        self.mav.WIRE_PROTOCOL_VERSION = "2.0"
-
-        # Start heartbeat thread
-        self.heartbeat_thread = threading.Thread(target=self.send_heartbeat_thread)
-        self.heartbeat_thread.daemon = True
-        self.heartbeat_thread.start()
-
-        self.mav.wait_heartbeat()
-        print(f"Heartbeat received from system {self.mav.target_system}, component {self.mav.target_component}")
-
-        # Waking up the autopilot, it is needed to ensure we get answer for log request
-        self.mav.mav.command_long_send(
-            self.mav.target_system,
-            self.mav.target_component,
-            mavutil.mavlink.MAV_CMD_REQUEST_MESSAGE,  # Command ID 512
-            0,  # Confirmation
-            mavutil.mavlink.MAVLINK_MSG_ID_AUTOPILOT_VERSION,  # param1: Message ID 148
-            0, 0, 0, 0, 0, 0  # params 2–7 are not used for this message
-        )
-
-        # Allow heartbeats to establish connection
-        time.sleep(3)
-
-
-    def send_heartbeat_thread(self):
-        while self.running:
-            self.mav.mav.heartbeat_send(
-                mavutil.mavlink.MAV_TYPE_GCS,
-                mavutil.mavlink.MAV_AUTOPILOT_GENERIC,
-                0, 0, 0
-            )
-            time.sleep(1)
-
-
-    def download_logs(self):
-        """Downloads logs to the output_dir."""
-        print("Request logs...")
-        self.mav.mav.log_request_list_send(self.mav.target_system, self.mav.target_component, 0, 0xFFFF)
-
-        log_entries = {}
-        total_logs = None
-        start_time = time.time()
-        last_entry_time = None
-
-        while True:
-            current_time = time.time()
-
-            # Case 1: If we haven't received any entries yet and we've waited more than 5 seconds
-            if not log_entries and current_time > start_time + 5:
-                print("Timed out waiting for first log entry (5s)")
-                break
-
-            # Case 2: If we have received at least one entry and it's been more than 3 seconds since the last one
-            if last_entry_time and current_time - last_entry_time > 3:
-                print(f"No new log entries received for 3 seconds. Moving on.")
-                break
-
-            # Case 3: If we've received all expected logs
-            if total_logs is not None and len(log_entries) >= total_logs:
-                print(f"Received all {total_logs} log entries.")
-                break
-
-            msg = self.mav.recv_match(type='LOG_ENTRY', blocking=True, timeout=1)
-
-            if msg and msg.id not in log_entries:
-                last_entry_time = time.time()
-                log_entries[msg.id] = msg
-
-                if total_logs is None:
-                    total_logs = msg.num_logs
-
-                print(f"Log ID: {msg.id}, Size: {msg.size} bytes, Date: {msg.time_utc} ({len(log_entries)}/{total_logs})")
-
-        if not log_entries:
-            print("No log entries found.")
-            return
-
-        for entry in log_entries.values():
-            self.download_log_file(entry)
-
-        self.classify_logs()
-
-
-    def download_log_file(self, log_entry):
-        """Downloads a log file to the output_dir."""
-        log_id = log_entry.id
-        log_size = log_entry.size
-        log_date = time.strftime("%Y-%m-%d_%H-%M-%S", time.gmtime(log_entry.time_utc))
-        output_filename = os.path.join(self.output_dir, f"log-{log_date}_{log_id}.ulg")
-
-        print(f"Downloading log {log_id} ({log_size} bytes) to {output_filename}...")
-
-        with open(output_filename, 'wb') as f:
-            self.mav.mav.log_request_data_send(self.mav.target_system, self.mav.target_component, log_id, 0, 0xFFFFFFFF)
-
-            bytes_received = 0
-            while bytes_received < log_size:
-                msg = self.mav.recv_match(type='LOG_DATA', blocking=True, timeout=5)
-                if msg:
-                    data_bytes = bytes(msg.data[:msg.count])
-                    f.write(data_bytes)
-                    bytes_received += msg.count
-                else:
-                    print("Timeout waiting for log data.")
-                    break
-
-        print(f"Finished downloading log {log_id}.")
-
-    def classify_logs(self):
-        """Classifies logs as encrypted (.ulge) based on file content."""
-        for log_file in os.listdir(self.output_dir):
-            log_path = os.path.join(self.output_dir, log_file)
-
-            if not os.path.isfile(log_path):
-                continue
-
-            # Read first 10 bytes to check for "ULogEnc"
-            with open(log_path, 'rb') as f:
-                first_bytes = f.read(10)
-
-            if b'ULogEnc' in first_bytes:
-                new_filename = log_file.replace(".ulg", ".ulge")
-                new_path = os.path.join(self.encrypted_dir, new_filename)
-                print(f"Found encrypted log: {new_path}")
-                shutil.move(log_path, new_path)
-
-
-    def cleanup(self):
-        """Stop the heartbeat thread and clean up resources."""
-        self.running = False
-        if self.heartbeat_thread.is_alive():
-            self.heartbeat_thread.join(timeout=2.0)
-
-
-def main():
-    parser = ArgumentParser(description="Download PX4 log files over MAVLink.")
-    parser.add_argument('connection_url', help="MAVLink connection URL (e.g., udp:0.0.0.0:14550, /dev/ttyACM0 --baudrate 57600)")
-    parser.add_argument('--output', '-o', default=os.path.join(os.path.dirname(__file__), "../..", "logs"), help="Output directory for log files (default: ../../logs)")
-    parser.add_argument('--baudrate', type=int, default=57600, help="Baudrate for serial connection (default: 57600)")
-    parser.add_argument('--source-system', type=int, default=254, help="MAVLink source system ID (default: 254)")
-
-
-    args = parser.parse_args()
-
-    output_dir = os.path.abspath(args.output)
-
-    print(f"Connecting to {args.connection_url}...")
-    log_downloader = MavlinkLogDownloader(
-        args.connection_url,
-        output_dir,
-        baudrate=args.baudrate,
-        source_system=args.source_system
-    )
-
-
-    try:
-        log_downloader.download_logs()
-    finally:
-        log_downloader.cleanup()
-
-if __name__ == '__main__':
-    main()

Tools/log_encryption/generate_keys.py

@@ -1,59 +0,0 @@
-import os
-import subprocess
-
-# Define the main PX4 directory (one level up from Tools)
-PX4_MAIN_DIR = os.path.abspath(os.path.join(os.path.dirname(__file__), "../.."))
-
-# Define the key folder paths
-KEY_FOLDER = os.path.join(PX4_MAIN_DIR, "keys")
-PUBLIC_KEY_FOLDER = os.path.join(KEY_FOLDER, "public")
-PRIVATE_KEY_FOLDER = os.path.join(KEY_FOLDER, "private")
-
-# Define the key file paths
-PRIVATE_KEY_PATH = os.path.join(PRIVATE_KEY_FOLDER, "private_key.pem")
-PUBLIC_KEY_DER_PATH = os.path.join(PUBLIC_KEY_FOLDER, "public_key.der")
-PUBLIC_KEY_PUB_PATH = os.path.join(PUBLIC_KEY_FOLDER, "public_key.pub")
-
-def create_key_folders():
-    """Creates key, public, and private folders if they do not exist."""
-    for folder in [KEY_FOLDER, PUBLIC_KEY_FOLDER, PRIVATE_KEY_FOLDER]:
-        if not os.path.exists(folder):
-            os.makedirs(folder)
-            print(f"Created '{folder}' directory.")
-        else:
-            print(f"'{folder}' directory already exists.")
-
-def generate_private_key():
-    """Generates a private key if it does not exist."""
-    if not os.path.exists(PRIVATE_KEY_PATH):
-        print("Generating private key...")
-        subprocess.run(["openssl", "genpkey", "-algorithm", "RSA", "-out", PRIVATE_KEY_PATH, "-pkeyopt", "rsa_keygen_bits:2048"])
-        print(f"Private key generated at: {PRIVATE_KEY_PATH}")
-    else:
-        print("Private key already exists.")
-
-def generate_public_key():
-    """Generates a public key in DER and PUB formats if they do not exist."""
-    if not os.path.exists(PUBLIC_KEY_DER_PATH):
-        print("Generating public key in DER format...")
-        subprocess.run(["openssl", "rsa", "-pubout", "-in", PRIVATE_KEY_PATH, "-outform", "DER", "-out", PUBLIC_KEY_DER_PATH])
-        print(f"Public key (DER) generated at: {PUBLIC_KEY_DER_PATH}")
-    else:
-        print("Public key (DER) already exists.")
-
-    if not os.path.exists(PUBLIC_KEY_PUB_PATH):
-        print("Generating public key in hex format...")
-        with open(PUBLIC_KEY_PUB_PATH, "w") as pub_file:
-            process = subprocess.Popen(["xxd", "-p", PUBLIC_KEY_DER_PATH], stdout=subprocess.PIPE)
-            output, _ = process.communicate()
-            hex_string = output.decode().strip().replace("\n", "")
-            formatted_hex = ", ".join(f"0x{hex_string[i:i+2]}" for i in range(0, len(hex_string), 2))
-            pub_file.write(formatted_hex)
-        print(f"Public key (hex) generated at: {PUBLIC_KEY_PUB_PATH}")
-    else:
-        print("Public key (hex) already exists.")
-
-if __name__ == "__main__":
-    create_key_folders()
-    generate_private_key()
-    generate_public_key()

Tools/module_config/output_groups_from_timer_config.py

@@ -30,12 +30,12 @@ def find_matching_brackets(brackets, s, verbose):
 
 def extract_timer(line):
     # Try format: initIOTimer(Timer::Timer5, DMA{DMA::Index1, DMA::Stream0, DMA::Channel6}),
-    search = re.search('Timer::([0-9a-zA-Z_]+)[,)]', line, re.IGNORECASE)
+    search = re.search('Timer::([0-9a-zA-Z_]+)[,\)]', line, re.IGNORECASE)
     if search:
         return search.group(1), 'generic'
 
     # NXP FlexPWM format format: initIOPWM(PWM::FlexPWM2),
-    search = re.search('PWM::Flex([0-9a-zA-Z_]+)..PWM::Submodule([0-9])[,)]', line, re.IGNORECASE)
+    search = re.search('PWM::Flex([0-9a-zA-Z_]+)..PWM::Submodule([0-9])[,\)]', line, re.IGNORECASE)
     if search:
         return (search.group(1) + '_' +  search.group(2)), 'imxrt'
 

Tools/setup/macos.sh

@@ -42,8 +42,6 @@ else
 		echo "Installing PX4 general dependencies (homebrew px4-dev)"
 		brew tap PX4/px4
 		brew install px4-dev
-		# lock down gcc to v9 for v1.16 branch
-		brew install gcc-arm-none-eabi
 		brew install ncurses
 		brew install python-tk
 	fi

Tools/setup/requirements.txt

@@ -26,4 +26,3 @@ setuptools>=39.2.0
 six>=1.12.0
 toml>=0.9
 sympy>=1.10.1
-pycryptodome

boards/airmind/mindpx-v2/src/init.c

@@ -129,7 +129,7 @@ __EXPORT void board_on_reset(int status)
  *
  * Description:
  *   All STM32 architectures must provide the following entry point.  This entry point
- *   is called early in the initialization -- after all memory has been configured
+ *   is called early in the intitialization -- after all memory has been configured
  *   and mapped but before any devices have been initialized.
  *
  ************************************************************************************/

boards/ark/can-flow-mr/src/led.c

@@ -67,7 +67,7 @@ void rgb_led(int r, int g, int b, int freqs)
 	if (!once) {
 		once = 1;
 
-		/* Enable Clock to Block */
+		/* Enabel Clock to Block */
 		modifyreg32(STM32_RCC_APB2ENR, 0, RCC_APB2ENR_TIM1EN);
 
 		/* Reload */

boards/ark/can-gps/src/led.c

@@ -67,7 +67,7 @@ void rgb_led(int r, int g, int b, int freqs)
 	if (!once) {
 		once = 1;
 
-		/* Enable Clock to Block */
+		/* Enabel Clock to Block */
 		modifyreg32(STM32_RCC_APB2ENR, 0, RCC_APB2ENR_TIM1EN);
 
 		/* Reload */

boards/ark/can-rtk-gps/src/led.c

@@ -67,7 +67,7 @@ void rgb_led(int r, int g, int b, int freqs)
 	if (!once) {
 		once = 1;
 
-		/* Enable Clock to Block */
+		/* Enabel Clock to Block */
 		modifyreg32(STM32_RCC_APB2ENR, 0, RCC_APB2ENR_TIM1EN);
 
 		/* Reload */

boards/ark/cannode/init/rc.board_sensors

@@ -107,7 +107,7 @@ icm20948_i2c_passthrough -X -q start
 hmc5883 -T -X -q start
 ist8308 -X -q start
 ist8310 -X -q start
-iis2mdc -X -q start
+lis2mdl -X -q start
 lis3mdl -X -q start
 qmc5883l -X -q start
 rm3100 -X -q start

boards/ark/cannode/src/led.c

@@ -67,7 +67,7 @@ void rgb_led(int r, int g, int b, int freqs)
 	if (!once) {
 		once = 1;
 
-		/* Enable Clock to Block */
+		/* Enabel Clock to Block */
 		modifyreg32(STM32_RCC_APB2ENR, 0, RCC_APB2ENR_TIM1EN);
 
 		/* Reload */

boards/ark/fmu-v6x/default.px4board

@@ -25,16 +25,7 @@ CONFIG_DRIVERS_IMU_INVENSENSE_IIM42652=y
 CONFIG_DRIVERS_IMU_INVENSENSE_IIM42653=y
 CONFIG_DRIVERS_IMU_MURATA_SCH16T=y
 CONFIG_COMMON_LIGHT=y
-CONFIG_DRIVERS_MAGNETOMETER_BOSCH_BMM150=y
-CONFIG_DRIVERS_MAGNETOMETER_HMC5883=y
-CONFIG_DRIVERS_MAGNETOMETER_QMC5883L=y
-CONFIG_DRIVERS_MAGNETOMETER_ISENTEK_IST8308=y
-CONFIG_DRIVERS_MAGNETOMETER_ISENTEK_IST8310=y
-CONFIG_DRIVERS_MAGNETOMETER_LIS3MDL=y
-CONFIG_DRIVERS_MAGNETOMETER_LSM303AGR=y
-CONFIG_DRIVERS_MAGNETOMETER_RM3100=y
-CONFIG_DRIVERS_MAGNETOMETER_MEMSIC_MMC5983MA=y
-CONFIG_DRIVERS_MAGNETOMETER_ST_IIS2MDC=y
+CONFIG_COMMON_MAGNETOMETER=y
 CONFIG_DRIVERS_POWER_MONITOR_INA226=y
 CONFIG_DRIVERS_POWER_MONITOR_INA228=y
 CONFIG_DRIVERS_POWER_MONITOR_INA238=y
@@ -76,7 +67,6 @@ CONFIG_MODULES_MC_POS_CONTROL=y
 CONFIG_MODULES_MC_RATE_CONTROL=y
 CONFIG_MODULES_NAVIGATOR=y
 CONFIG_NUM_MISSION_ITMES_SUPPORTED=1000
-CONFIG_MODULES_PAYLOAD_DELIVERER=y
 CONFIG_MODULES_RC_UPDATE=y
 CONFIG_MODULES_ROVER_POS_CONTROL=y
 CONFIG_MODULES_SENSORS=y

boards/ark/fmu-v6x/encrypted_logs.px4board

@@ -1,13 +0,0 @@
-CONFIG_DRIVERS_BATT_SMBUS=n
-CONFIG_DRIVERS_PX4IO=n
-CONFIG_BOARD_CRYPTO=y
-CONFIG_DRIVERS_STUB_KEYSTORE=y
-CONFIG_DRIVERS_SW_CRYPTO=y
-# CONFIG_EKF2_AUX_GLOBAL_POSITION is not set
-CONFIG_PUBLIC_KEY0="../../../Tools/test_keys/key0.pub"
-CONFIG_PUBLIC_KEY1="../../../Tools/test_keys/rsa2048.pub"
-CONFIG_MODULES_FW_ATT_CONTROL=n
-CONFIG_MODULES_FW_AUTOTUNE_ATTITUDE_CONTROL=n
-CONFIG_MODULES_FW_POS_CONTROL=n
-CONFIG_MODULES_FW_RATE_CONTROL=n
-CONFIG_MODULES_VTOL_ATT_CONTROL=n

boards/ark/fmu-v6x/nuttx-config/nsh/defconfig

@@ -84,8 +84,6 @@ CONFIG_CDCACM_RXBUFSIZE=600
 CONFIG_CDCACM_TXBUFSIZE=12000
 CONFIG_CDCACM_VENDORID=0x3185
 CONFIG_CDCACM_VENDORSTR="ARK"
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_RANDOM_POOL=y
 CONFIG_DEBUG_FULLOPT=y
 CONFIG_DEBUG_HARDFAULT_ALERT=y
 CONFIG_DEBUG_MEMFAULT=y
@@ -296,7 +294,6 @@ CONFIG_UART4_RXBUFSIZE=600
 CONFIG_UART4_TXBUFSIZE=1500
 CONFIG_UART5_IFLOWCONTROL=y
 CONFIG_UART5_OFLOWCONTROL=y
-CONFIG_UART5_RXBUFSIZE=800
 CONFIG_UART5_RXDMA=y
 CONFIG_UART5_TXBUFSIZE=10000
 CONFIG_UART5_TXDMA=y

boards/ark/fmu-v6x/src/board_config.h

@@ -127,9 +127,6 @@
 #define SPI6_nRESET_EXTERNAL1       /* PF10 */ (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTF|GPIO_PIN10)
 #define SPI6_RESET(on_true)          px4_arch_gpiowrite(SPI6_nRESET_EXTERNAL1, !(on_true))
 
-// ADIS16507 hardware reset
-#define GPIO_ADIS16507_RESET(reset) SPI6_RESET(reset)
-
 /* I2C busses */
 
 /* Devices on the onboard buses.

boards/ark/fpv/default.px4board

@@ -8,8 +8,6 @@ CONFIG_BOARD_SERIAL_TEL4="/dev/ttyS3"
 CONFIG_BOARD_SERIAL_RC="/dev/ttyS5"
 CONFIG_DRIVERS_ADC_BOARD_ADC=y
 CONFIG_DRIVERS_BAROMETER_BMP388=y
-CONFIG_DRIVERS_CAMERA_CAPTURE=y
-CONFIG_DRIVERS_CAMERA_TRIGGER=y
 CONFIG_DRIVERS_CDCACM_AUTOSTART=y
 CONFIG_COMMON_DIFFERENTIAL_PRESSURE=y
 CONFIG_COMMON_DISTANCE_SENSOR=y
@@ -27,7 +25,6 @@ CONFIG_DRIVERS_UAVCAN=y
 CONFIG_BOARD_UAVCAN_TIMER_OVERRIDE=2
 CONFIG_MODULES_AIRSPEED_SELECTOR=y
 CONFIG_MODULES_BATTERY_STATUS=y
-CONFIG_MODULES_CAMERA_FEEDBACK=y
 CONFIG_MODULES_COMMANDER=y
 CONFIG_MODULES_CONTROL_ALLOCATOR=y
 CONFIG_MODULES_DATAMAN=y
@@ -56,12 +53,9 @@ CONFIG_MODULES_MC_HOVER_THRUST_ESTIMATOR=y
 CONFIG_MODULES_MC_POS_CONTROL=y
 CONFIG_MODULES_MC_RATE_CONTROL=y
 CONFIG_MODULES_NAVIGATOR=y
-CONFIG_MODULES_PAYLOAD_DELIVERER=y
-CONFIG_NUM_MISSION_ITMES_SUPPORTED=1000
 CONFIG_MODULES_RC_UPDATE=y
 CONFIG_MODULES_SENSORS=y
 CONFIG_MODULES_UXRCE_DDS_CLIENT=y
-CONFIG_MODULES_VTOL_ATT_CONTROL=y
 CONFIG_SYSTEMCMDS_ACTUATOR_TEST=y
 CONFIG_SYSTEMCMDS_BSONDUMP=y
 CONFIG_SYSTEMCMDS_DMESG=y

boards/ark/fpv/encrypted_logs.px4board

@@ -1,12 +0,0 @@
-
-CONFIG_BOARD_CRYPTO=y
-CONFIG_DRIVERS_STUB_KEYSTORE=y
-CONFIG_DRIVERS_SW_CRYPTO=y
-# CONFIG_EKF2_AUX_GLOBAL_POSITION is not set
-CONFIG_PUBLIC_KEY0="../../../Tools/test_keys/key0.pub"
-CONFIG_PUBLIC_KEY1="../../../Tools/test_keys/rsa2048.pub"
-CONFIG_MODULES_FW_ATT_CONTROL=n
-CONFIG_MODULES_FW_AUTOTUNE_ATTITUDE_CONTROL=n
-CONFIG_MODULES_FW_POS_CONTROL=n
-CONFIG_MODULES_FW_RATE_CONTROL=n
-CONFIG_MODULES_VTOL_ATT_CONTROL=n

boards/ark/fpv/nuttx-config/include/board_dma_map.h

@@ -34,25 +34,75 @@
 #pragma once
 
 // DMAMUX1 Using at most 8 Channels on DMA1 --------   Assigned
-#define DMAMAP_SPI1_RX    DMAMAP_DMA12_SPI1RX_0     // 1 DMA1:37 IIM-42653
-#define DMAMAP_SPI1_TX    DMAMAP_DMA12_SPI1TX_0     // 2 DMA1:38 IIM-42653
-#define DMAMAP_USART1_RX  DMAMAP_DMA12_USART1RX_0   // 3 DMA1:41 GPS1
-#define DMAMAP_USART1_TX  DMAMAP_DMA12_USART1TX_0   // 4 DMA1:42 GPS1
-#define DMAMAP_USART6_RX  DMAMAP_DMA12_USART6RX_0   // 5 DMA1:71 RC
-#define DMAMAP_USART6_TX  DMAMAP_DMA12_USART6TX_0   // 6 DMA1:72 RC
-// Timer 4 (DMAMAP_DMA12_TIM4UP_0)                  // 7 DMA1:32 TIM4UP/TIM4CH1-4
-// Timer 5 (DMAMAP_DMA12_TIM5UP_0)                  // 8 DMA1:50 TIM5UP/TIM5CH1-4
+//                                                     V
+
+// Timer 4 Channel 1                               /* DMA1:29 TIM4CH1 */
+
+#define DMAMAP_SPI1_RX    DMAMAP_DMA12_SPI1RX_0   /* 1 DMA1:37 IIM-42653 */
+#define DMAMAP_SPI1_TX    DMAMAP_DMA12_SPI1TX_0   /* 2 DMA1:38 IIM-42653 */
+
+//#define DMAMAP_SPI2_RX    DMAMAP_DMA12_SPI2RX_0  /* 3 DMA1:39 ICM-42688-P */
+//#define DMAMAP_SPI2_TX    DMAMAP_DMA12_SPI2TX_0  /* 4 DMA1:40 ICM-42688-P */
+
+#define DMAMAP_USART1_RX  DMAMAP_DMA12_USART1RX_0 /*  DMA1:41  GPS1 */
+#define DMAMAP_USART1_TX  DMAMAP_DMA12_USART1TX_0 /*  DMA1:42  GPS1 */
+
+//#define DMAMAP_USART3_RX  DMAMAP_DMA12_USART3RX_0 /*  DMA1:45 DEBUG */
+//#define DMAMAP_USART3_TX  DMAMAP_DMA12_USART3TX_0 /*  DMA1:46 DEBUG */
+
+// Timer 8 Channel 1                               /* DMA1:47 TIM8CH1 */
+// Timer 8 Channel 2                               /* DMA1:48 TIM8CH2 */
+// Timer 8 Channel 3                               /* DMA1:49 TIM8CH3 */
+// Timer 8 Channel 4                               /* DMA1:50 TIM8CH4 */
+
+// Timer 5 Channel 1                               /* DMA1:55 TIM5CH1 */
+// Timer 5 Channel 2                               /* DMA1:56 TIM5CH2 */
+// Timer 5 Channel 3                               /* DMA1:57 TIM5CH3 */
+// Timer 5 Channel 4                               /* DMA1:58 TIM5CH4 */
+
+// #define DMAMAP_UART4_RX   DMAMAP_DMA12_UART4RX_0  /*  DMA1:63 UART4 */
+// #define DMAMAP_UART4_TX   DMAMAP_DMA12_UART4TX_0  /*  DMA1:64 UART4 */
+
+#define DMAMAP_USART6_RX  DMAMAP_DMA12_USART6RX_0 /* 5 DMA1:71 RC */
+// #define DMAMAP_USART6_TX  DMAMAP_DMA12_USART6TX_0 /* 6 DMA1:72 RC */
+
+// Assigned in timer_config.cpp
+
+// Timer 4                                          /* 7 DMA1:32 TIM4UP */
+// Timer 5                                          /* 8 DMA1:50 TIM5UP */
 
 // DMAMUX2 Using at most 8 Channels on DMA2 --------   Assigned
-#define DMAMAP_USART2_RX  DMAMAP_DMA12_USART2RX_1   // 1 DMA2:43 VTX
-#define DMAMAP_UART5_RX   DMAMAP_DMA12_UART5RX_1    // 2 DMA2:65 VTX
-#define DMAMAP_UART5_TX   DMAMAP_DMA12_UART5TX_1    // 3 DMA2:66 VTX
-#define DMAMAP_UART7_RX   DMAMAP_DMA12_UART7RX_1    // 4 DMA2:79 TELEM1
-#define DMAMAP_UART7_TX   DMAMAP_DMA12_UART7TX_1    // 5 DMA2:80 TELEM1
-#define DMAMAP_USART3_RX  DMAMAP_DMA12_USART3RX_1   // 6 DMA2:45 DEBUG
-#define DMAMAP_USART3_TX  DMAMAP_DMA12_USART3TX_1   // 7 DMA2:46 DEBUG
-// available
+//                                                     V
+
+// Timer 4 Channel 1                               /* DMA2:29 TIM4CH1 */
+
+#define DMAMAP_USART2_RX  DMAMAP_DMA12_USART2RX_1   /* 3 DMA2:43 TELEM3 */
+#define DMAMAP_USART2_TX  DMAMAP_DMA12_USART2TX_1   /* 4 DMA2:44 TELEM3 */
+
+#define DMAMAP_USART3_RX  DMAMAP_DMA12_USART3RX_1   /* 3 DMA2:45 DEBUG */
+#define DMAMAP_USART3_TX  DMAMAP_DMA12_USART3TX_1   /* 4 DMA2:46 DEBUG */
+
+// Timer 8 Channel 1                                 /* DMA2:47 TIM8CH1 */
+// Timer 8 Channel 2                                 /* DMA2:48 TIM8CH2 */
+// Timer 8 Channel 3                                 /* DMA2:49 TIM8CH3 */
+// Timer 8 Channel 4                                 /* DMA2:50 TIM8CH4 */
+
+// Timer 5 Channel 1                                 /* DMA2:55 TIM5CH1 */
+// Timer 5 Channel 2                                 /* DMA2:56 TIM5CH2 */
+// Timer 5 Channel 3                                 /* DMA2:57 TIM5CH3 */
+// Timer 5 Channel 4                                 /* DMA2:58 TIM5CH4 */
+
+//#define DMAMAP_SPI3_RX    DMAMAP_DMA12_SPI3RX_1     /* 1 DMA2:61 BMI088 */
+//#define DMAMAP_SPI3_TX    DMAMAP_DMA12_SPI3TX_1     /* 2 DMA2:62 BMI088 */
+
+#define DMAMAP_UART5_RX   DMAMAP_DMA12_UART5RX_1    /* 5 DMA2:65 TELEM2 */
+#define DMAMAP_UART5_TX   DMAMAP_DMA12_UART5TX_1    /* 6 DMA2:66 TELEM2 */
+
+#define DMAMAP_UART7_RX   DMAMAP_DMA12_UART7RX_1    /* 7 DMA1:79 TELEM1 */
+#define DMAMAP_UART7_TX   DMAMAP_DMA12_UART7TX_1    /* 8 DMA1:80 TELEM1 */
 
 // DMAMUX2 Using at most 8 Channels on BDMA --------   Assigned
-#define DMAMAP_SPI6_RX    DMAMAP_BDMA_SPI6_RX       // 1 BDMA:11 SPI J11
-#define DMAMAP_SPI6_TX    DMAMAP_BDMA_SPI6_TX       // 2 BDMA:12 SPI J11
+//                                                     V
+
+#define DMAMAP_SPI6_RX    DMAMAP_BDMA_SPI6_RX       /* 1 BDMA:11 SPI J11 */
+#define DMAMAP_SPI6_TX    DMAMAP_BDMA_SPI6_TX       /* 2 BDMA:12 SPI J11 */

boards/ark/fpv/nuttx-config/nsh/defconfig

@@ -82,8 +82,6 @@ CONFIG_CDCACM_RXBUFSIZE=600
 CONFIG_CDCACM_TXBUFSIZE=12000
 CONFIG_CDCACM_VENDORID=0x3185
 CONFIG_CDCACM_VENDORSTR="ARK"
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_RANDOM_POOL=y
 CONFIG_DEBUG_FULLOPT=y
 CONFIG_DEBUG_HARDFAULT_ALERT=y
 CONFIG_DEBUG_MEMFAULT=y
@@ -260,6 +258,8 @@ CONFIG_USART1_TXDMA=y
 CONFIG_USART2_BAUD=57600
 CONFIG_USART2_RXBUFSIZE=600
 CONFIG_USART2_RXDMA=y
+CONFIG_USART2_TXBUFSIZE=1500
+CONFIG_USART2_TXDMA=y
 CONFIG_USART3_BAUD=57600
 CONFIG_USART3_RXBUFSIZE=180
 CONFIG_USART3_RXDMA=y
@@ -270,7 +270,6 @@ CONFIG_USART6_BAUD=57600
 CONFIG_USART6_RXBUFSIZE=600
 CONFIG_USART6_RXDMA=y
 CONFIG_USART6_TXBUFSIZE=1500
-CONFIG_USART6_TXDMA=y
 CONFIG_USBDEV=y
 CONFIG_USBDEV_BUSPOWERED=y
 CONFIG_USBDEV_MAXPOWER=500

boards/ark/pi6x/encrypted_logs.px4board

@@ -1,6 +0,0 @@
-CONFIG_BOARD_CRYPTO=y
-CONFIG_DRIVERS_STUB_KEYSTORE=y
-CONFIG_DRIVERS_SW_CRYPTO=y
-# CONFIG_EKF2_AUX_GLOBAL_POSITION is not set
-CONFIG_PUBLIC_KEY0="../../../Tools/test_keys/key0.pub"
-CONFIG_PUBLIC_KEY1="../../../Tools/test_keys/rsa2048.pub"

boards/ark/pi6x/nuttx-config/nsh/defconfig

@@ -82,8 +82,6 @@ CONFIG_CDCACM_RXBUFSIZE=600
 CONFIG_CDCACM_TXBUFSIZE=12000
 CONFIG_CDCACM_VENDORID=0x3185
 CONFIG_CDCACM_VENDORSTR="ARK"
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_RANDOM_POOL=y
 CONFIG_DEBUG_FULLOPT=y
 CONFIG_DEBUG_HARDFAULT_ALERT=y
 CONFIG_DEBUG_MEMFAULT=y

boards/ark/septentrio-gps/src/led.c

@@ -67,7 +67,7 @@ void rgb_led(int r, int g, int b, int freqs)
 	if (!once) {
 		once = 1;
 
-		/* Enable Clock to Block */
+		/* Enabel Clock to Block */
 		modifyreg32(STM32_RCC_APB2ENR, 0, RCC_APB2ENR_TIM1EN);
 
 		/* Reload */

boards/ark/teseo-gps/src/led.c

@@ -67,7 +67,7 @@ void rgb_led(int r, int g, int b, int freqs)
 	if (!once) {
 		once = 1;
 
-		/* Enable Clock to Block */
+		/* Enabel Clock to Block */
 		modifyreg32(STM32_RCC_APB2ENR, 0, RCC_APB2ENR_TIM1EN);
 
 		/* Reload */

boards/auterion/fmu-v6s/bootloader.px4board

@@ -1,3 +0,0 @@
-CONFIG_BOARD_TOOLCHAIN="arm-none-eabi"
-CONFIG_BOARD_ARCHITECTURE="cortex-m7"
-CONFIG_BOARD_ROMFSROOT=""

boards/auterion/fmu-v6s/cmake/upload.cmake

@@ -1,49 +0,0 @@
-############################################################################
-#
-#   Copyright (c) 2023 PX4 Development Team. All rights reserved.
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions
-# are met:
-#
-# 1. Redistributions of source code must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-# 2. Redistributions in binary form must reproduce the above copyright
-#    notice, this list of conditions and the following disclaimer in
-#    the documentation and/or other materials provided with the
-#    distribution.
-# 3. Neither the name PX4 nor the names of its contributors may be
-#    used to endorse or promote products derived from this software
-#    without specific prior written permission.
-#
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
-# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
-# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
-# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
-# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
-# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
-# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
-# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-# POSSIBILITY OF SUCH DAMAGE.
-#
-############################################################################
-
-
-set(PX4_FW_NAME ${PX4_BINARY_DIR}/${PX4_BOARD_VENDOR}_${PX4_BOARD_MODEL}_${PX4_BOARD_LABEL}.px4)
-
-add_custom_target(upload_skynode_usb
-	COMMAND ${PX4_SOURCE_DIR}/Tools/auterion/upload_skynode.sh --file=${PX4_FW_NAME}
-	DEPENDS ${PX4_FW_NAME}
-	COMMENT "Uploading PX4"
-	USES_TERMINAL
-)
-
-add_custom_target(upload_skynode_wifi
-	COMMAND ${PX4_SOURCE_DIR}/Tools/auterion/upload_skynode.sh --file=${PX4_FW_NAME} --wifi
-	DEPENDS ${PX4_FW_NAME}
-	COMMENT "Uploading PX4"
-	USES_TERMINAL
-)

boards/auterion/fmu-v6s/default.px4board

@@ -1,94 +0,0 @@
-CONFIG_BOARD_TOOLCHAIN="arm-none-eabi"
-CONFIG_BOARD_ARCHITECTURE="cortex-m7"
-CONFIG_BOARD_ETHERNET=y
-CONFIG_BOARD_SERIAL_GPS1="/dev/ttyS6"
-CONFIG_BOARD_SERIAL_TEL1="/dev/ttyS0"
-CONFIG_BOARD_SERIAL_TEL2="/dev/ttyS2"
-CONFIG_BOARD_PARAM_FILE="/fs/microsd/params"
-CONFIG_DRIVERS_ADC_BOARD_ADC=y
-CONFIG_DRIVERS_BAROMETER_BMP388=y
-CONFIG_COMMON_DIFFERENTIAL_PRESSURE=y
-CONFIG_COMMON_DISTANCE_SENSOR=y
-CONFIG_DRIVERS_DSHOT=y
-CONFIG_DRIVERS_GNSS_SEPTENTRIO=y
-CONFIG_DRIVERS_GPS=y
-CONFIG_DRIVERS_IMU_BOSCH_BMI088=y
-CONFIG_BMI088_ACCELEROMETER_INT2=y
-CONFIG_COMMON_INS=y
-CONFIG_COMMON_LIGHT=y
-CONFIG_COMMON_MAGNETOMETER=y
-CONFIG_DATAMAN_PERSISTENT_STORAGE=n
-CONFIG_DRIVERS_MAGNETOMETER_BOSCH_BMM350=y
-CONFIG_DRIVERS_PWM_OUT=y
-CONFIG_DRIVERS_RC_INPUT=y
-CONFIG_DRIVERS_ROBOCLAW=y
-CONFIG_DRIVERS_UAVCAN=y
-CONFIG_BOARD_UAVCAN_INTERFACES=1
-CONFIG_BOARD_UAVCAN_TIMER_OVERRIDE=2
-CONFIG_MODULES_AIRSPEED_SELECTOR=y
-CONFIG_MODULES_BATTERY_STATUS=y
-CONFIG_MODULES_CAMERA_FEEDBACK=y
-CONFIG_MODULES_COMMANDER=y
-CONFIG_MODULES_CONTROL_ALLOCATOR=y
-CONFIG_MODULES_DATAMAN=y
-CONFIG_MODULES_EKF2=y
-CONFIG_MODULES_ESC_BATTERY=y
-CONFIG_MODULES_EVENTS=y
-CONFIG_MODULES_FLIGHT_MODE_MANAGER=y
-CONFIG_MODULES_FW_ATT_CONTROL=y
-CONFIG_MODULES_FW_AUTOTUNE_ATTITUDE_CONTROL=y
-CONFIG_MODULES_FW_POS_CONTROL=y
-CONFIG_FIGURE_OF_EIGHT=y
-CONFIG_MODULES_FW_RATE_CONTROL=y
-CONFIG_MODULES_GIMBAL=y
-CONFIG_MODULES_GYRO_CALIBRATION=y
-CONFIG_MODULES_LAND_DETECTOR=y
-CONFIG_MODULES_LANDING_TARGET_ESTIMATOR=y
-CONFIG_MODULES_LOAD_MON=y
-CONFIG_MODULES_LOGGER=y
-CONFIG_LOGGER_STACK_SIZE=4100
-CONFIG_MODULES_MAG_BIAS_ESTIMATOR=y
-CONFIG_MODULES_MANUAL_CONTROL=y
-CONFIG_MODULES_MAVLINK=y
-CONFIG_MAVLINK_DIALECT="development"
-CONFIG_MODULES_MC_ATT_CONTROL=y
-CONFIG_MODULES_MC_AUTOTUNE_ATTITUDE_CONTROL=y
-CONFIG_MODULES_MC_HOVER_THRUST_ESTIMATOR=y
-CONFIG_MODULES_MC_POS_CONTROL=y
-CONFIG_MODULES_MC_RATE_CONTROL=y
-CONFIG_MODULES_NAVIGATOR=y
-CONFIG_MODE_NAVIGATOR_VTOL_TAKEOFF=y
-CONFIG_MODULES_RC_UPDATE=y
-CONFIG_MODULES_ROVER_ACKERMANN=y
-CONFIG_MODULES_ROVER_DIFFERENTIAL=y
-CONFIG_MODULES_ROVER_MECANUM=y
-CONFIG_MODULES_SENSORS=y
-CONFIG_MODULES_SIMULATION_SIMULATOR_SIH=y
-CONFIG_MODULES_TIME_PERSISTOR=y
-CONFIG_MODULES_UXRCE_DDS_CLIENT=y
-CONFIG_MODULES_VTOL_ATT_CONTROL=y
-CONFIG_SYSTEMCMDS_ACTUATOR_TEST=y
-CONFIG_SYSTEMCMDS_BSONDUMP=y
-CONFIG_SYSTEMCMDS_DMESG=y
-CONFIG_SYSTEMCMDS_GPIO=y
-CONFIG_SYSTEMCMDS_HARDFAULT_LOG=y
-CONFIG_SYSTEMCMDS_I2C_LAUNCHER=y
-CONFIG_SYSTEMCMDS_I2CDETECT=y
-CONFIG_SYSTEMCMDS_LED_CONTROL=y
-CONFIG_SYSTEMCMDS_MFT=y
-CONFIG_SYSTEMCMDS_MFT_CFG=y
-CONFIG_SYSTEMCMDS_MTD=y
-CONFIG_SYSTEMCMDS_NETMAN=y
-CONFIG_SYSTEMCMDS_NSHTERM=y
-CONFIG_SYSTEMCMDS_PARAM=y
-CONFIG_SYSTEMCMDS_PERF=y
-CONFIG_SYSTEMCMDS_REBOOT=y
-CONFIG_SYSTEMCMDS_SD_BENCH=y
-CONFIG_SYSTEMCMDS_SD_STRESS=y
-CONFIG_SYSTEMCMDS_SERIAL_TEST=y
-CONFIG_SYSTEMCMDS_SYSTEM_TIME=y
-CONFIG_SYSTEMCMDS_TOP=y
-CONFIG_SYSTEMCMDS_TOPIC_LISTENER=y
-CONFIG_SYSTEMCMDS_UORB=y
-CONFIG_SYSTEMCMDS_VER=y
-CONFIG_SYSTEMCMDS_WORK_QUEUE=y

boards/auterion/fmu-v6s/firmware.prototype

@@ -1,13 +0,0 @@
-{
-    "board_id": 60,
-    "magic": "AutFWv1",
-    "description": "Firmware for the AutFMUv6S board",
-    "image": "",
-    "build_time": 0,
-    "summary": "AutFMUv6S",
-    "version": "0.1",
-    "image_size": 0,
-    "image_maxsize": 1966080,
-    "git_identity": "",
-    "board_revision": 0
-}

boards/auterion/fmu-v6s/init/rc.board_defaults

@@ -1,28 +0,0 @@
-#!/bin/sh
-#
-# board specific defaults
-#------------------------------------------------------------------------------
-
-# Set the backend of the dataman to SRAM
-param set-default SYS_DM_BACKEND 1
-# Set TELEM1 as default mavlink connection
-param set-default MAV_0_CONFIG 0
-# Disable logger writing to FRAM, only stream over MAVLINK
-set LOGGER_ARGS "-m mavlink"
-
-# 200kOhm/10kOhm voltage divider on V_BAT
-param set-default BAT1_V_DIV 21
-
-# Skynode: use the "custom participant", IP=10.41.10.1 config for uxrce_dds_client
-param set-default UXRCE_DDS_PTCFG 2
-param set-default UXRCE_DDS_AG_IP 170461697
-param set-default UXRCE_DDS_CFG 1000
-
-# Update default IP config if needed
-netman update_default -i eth0
-
-# Start a second NSH connected to the debug port
-nshterm /dev/ttyS3 &
-
-# Start the time_persistor to cyclically store the RTC in FRAM
-time_persistor start

boards/auterion/fmu-v6s/init/rc.board_mavlink

@@ -1,19 +0,0 @@
-#!/bin/sh
-#
-# Auterion FMUv6s specific board MAVLink startup script.
-#------------------------------------------------------------------------------
-
-if param compare MAV_S_FORWARD 1
-then
-	set S_FORWARD "-f"
-else
-	set S_FORWARD ""
-fi
-
-# TELEM1 is mapped to USART1 with flow control
-mavlink start -d /dev/ttyS0 -b 3000000 -r 290000 -m onboard_low_bandwidth -x -z $S_FORWARD
-
-# Ensure nothing else starts on TEL1
-set PRT_TEL1_ 1
-
-unset S_FORWARD

boards/auterion/fmu-v6s/init/rc.board_sensors

@@ -1,30 +0,0 @@
-#!/bin/sh
-#
-# Forward is where the MIPI and ESC connectors are
-#
-# Auterion FMUv6S specific board sensors init
-#------------------------------------------------------------------------------
-
-# For system_power and battery_status
-board_adc start
-
-# IMU3 on SPI3, ROTATION_NONE=0
-bmi088 -A -R 0 -s start
-bmi088 -G -R 0 -s start
-
-if ver hwtypecmp V6S013 V6S015
-then
-	# Revision(s) with BMM150
-	# MAG on I2C4, ROTATION_ROLL_180=8
-	bmm150 -I -R 8 start
-else
-	# Revision(s) with BMM350
-	# MAG on I2C4, ROTATION_ROLL_180=8
-	bmm350 -I -R 8 start
-fi
-
-# External compass on GPS1/I2C1 (the 3rd external bus): standard Holybro Pixhawk 4 or CUAV V5 GPS/compass puck (with lights, safety button, and buzzer)
-ist8310 -X -b 1 -R 10 start
-
-# BARO on I2C4
-bmp388 -I -b 4 -a 0x77 start

boards/auterion/fmu-v6s/multicopter.px4board

@@ -1,12 +0,0 @@
-CONFIG_COMMON_DIFFERENTIAL_PRESSURE=n
-CONFIG_MODE_NAVIGATOR_VTOL_TAKEOFF=n
-CONFIG_MODULES_AIRSPEED_SELECTOR=n
-CONFIG_MODULES_FW_ATT_CONTROL=n
-CONFIG_MODULES_FW_AUTOTUNE_ATTITUDE_CONTROL=n
-CONFIG_MODULES_FW_POS_CONTROL=n
-CONFIG_MODULES_FW_RATE_CONTROL=n
-CONFIG_MODULES_VTOL_ATT_CONTROL=n
-CONFIG_COMMON_RC=y
-CONFIG_EKF2_AUX_GLOBAL_POSITION=y
-# CONFIG_EKF2_SIDESLIP is not set
-# CONFIG_SENSORS_VEHICLE_AIRSPEED is not set

boards/auterion/fmu-v6s/nuttx-config/Kconfig

@@ -1,17 +0,0 @@
-#
-# For a description of the syntax of this configuration file,
-# see misc/tools/kconfig-language.txt.
-#
-config BOARD_HAS_PROBES
-	bool "Board provides GPIO or other Hardware for signaling to timing analyze."
-	default y
-	---help---
-		This board provides GPIO FMU-CH1-5, CAP1-6 as PROBE_1-11 to provide timing signals from selected drivers.
-
-config BOARD_USE_PROBES
-	bool "Enable the use the board provided FMU-CH1-5, CAP1-6 as PROBE_1-11"
-	default n
-	depends on BOARD_HAS_PROBES
-
-	---help---
-		Select to use GPIO FMU-CH1-5, CAP1-6  to provide timing signals from selected drivers.

boards/auterion/fmu-v6s/nuttx-config/bootloader/defconfig

@@ -1,79 +0,0 @@
-#
-# This file is autogenerated: PLEASE DO NOT EDIT IT.
-#
-# You can use "make menuconfig" to make any modifications to the installed .config file.
-# You can then do "make savedefconfig" to generate a new defconfig file that includes your
-# modifications.
-#
-# CONFIG_DEV_CONSOLE is not set
-# CONFIG_DISABLE_PSEUDOFS_OPERATIONS is not set
-# CONFIG_DISABLE_PTHREAD is not set
-# CONFIG_SPI_EXCHANGE is not set
-# CONFIG_STM32H7_SYSCFG is not set
-# CONFIG_STM32H7_USE_LEGACY_PINMAP is not set
-CONFIG_ARCH="arm"
-CONFIG_ARCH_BOARD_CUSTOM=y
-CONFIG_ARCH_BOARD_CUSTOM_DIR="../../../../boards/auterion/fmu-v6s/nuttx-config"
-CONFIG_ARCH_BOARD_CUSTOM_DIR_RELPATH=y
-CONFIG_ARCH_BOARD_CUSTOM_NAME="auterion"
-CONFIG_ARCH_CHIP="stm32h7"
-CONFIG_ARCH_CHIP_STM32H743VI=y
-CONFIG_ARCH_CHIP_STM32H7=y
-CONFIG_ARCH_INTERRUPTSTACK=768
-CONFIG_ARMV7M_BASEPRI_WAR=y
-CONFIG_ARMV7M_ICACHE=y
-CONFIG_ARMV7M_MEMCPY=y
-CONFIG_ARMV7M_USEBASEPRI=y
-CONFIG_BOARDCTL=y
-CONFIG_BOARDCTL_RESET=y
-CONFIG_BOARD_ASSERT_RESET_VALUE=0
-CONFIG_BOARD_INITTHREAD_PRIORITY=254
-CONFIG_BOARD_LATE_INITIALIZE=y
-CONFIG_BOARD_LOOPSPERMSEC=95150
-CONFIG_BOARD_RESET_ON_ASSERT=2
-CONFIG_DEBUG_FULLOPT=y
-CONFIG_DEBUG_SYMBOLS=y
-CONFIG_DEBUG_TCBINFO=y
-CONFIG_DEFAULT_SMALL=y
-CONFIG_EXPERIMENTAL=y
-CONFIG_FDCLONE_DISABLE=y
-CONFIG_FDCLONE_STDIO=y
-CONFIG_HAVE_CXX=y
-CONFIG_HAVE_CXXINITIALIZE=y
-CONFIG_IDLETHREAD_STACKSIZE=750
-CONFIG_INIT_ENTRYPOINT="bootloader_main"
-CONFIG_INIT_STACKSIZE=3194
-CONFIG_LIBC_FLOATINGPOINT=y
-CONFIG_LIBC_LONG_LONG=y
-CONFIG_LIBC_STRERROR=y
-CONFIG_MEMSET_64BIT=y
-CONFIG_MEMSET_OPTSPEED=y
-CONFIG_PREALLOC_TIMERS=50
-CONFIG_PTHREAD_MUTEX_ROBUST=y
-CONFIG_PTHREAD_STACK_MIN=512
-CONFIG_RAM_SIZE=245760
-CONFIG_RAM_START=0x20010000
-CONFIG_RAW_BINARY=y
-CONFIG_SERIAL_TERMIOS=y
-CONFIG_SIG_DEFAULT=y
-CONFIG_SIG_SIGALRM_ACTION=y
-CONFIG_SIG_SIGUSR1_ACTION=y
-CONFIG_SIG_SIGUSR2_ACTION=y
-CONFIG_SPI=y
-CONFIG_STACK_COLORATION=y
-CONFIG_START_DAY=30
-CONFIG_START_MONTH=11
-CONFIG_STDIO_BUFFER_SIZE=32
-CONFIG_STM32H7_BKPSRAM=y
-CONFIG_STM32H7_DMA1=y
-CONFIG_STM32H7_DMA2=y
-CONFIG_STM32H7_PROGMEM=y
-CONFIG_STM32H7_SERIAL_DISABLE_REORDERING=y
-CONFIG_STM32H7_TIM1=y
-CONFIG_STM32H7_USART1=y
-CONFIG_SYSTEMTICK_HOOK=y
-CONFIG_TASK_NAME_SIZE=24
-CONFIG_TTY_SIGINT=y
-CONFIG_TTY_SIGINT_CHAR=0x03
-CONFIG_TTY_SIGTSTP=y
-CONFIG_USEC_PER_TICK=1000

boards/auterion/fmu-v6s/nuttx-config/include/board.h

@@ -1,494 +0,0 @@
-/************************************************************************************
- * nuttx-configs/auterion_fmu-v6s/include/board.h
- *
- *   Copyright (C) 2016-2024 Gregory Nutt. All rights reserved.
- *   Authors: David Sidrane <david.sidrane@nscdg.com>
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- * 3. Neither the name NuttX nor the names of its contributors may be
- *    used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ************************************************************************************/
-#ifndef __NUTTX_CONFIG_PX4_FMU_V6S_INCLUDE_BOARD_H
-#define __NUTTX_CONFIG_PX4_FMU_V6S_INCLUDE_BOARD_H
-
-/************************************************************************************
- * Included Files
- ************************************************************************************/
-
-#include "board_dma_map.h"
-
-#include <nuttx/config.h>
-
-#ifndef __ASSEMBLY__
-# include <stdint.h>
-#endif
-
-#include "stm32_rcc.h"
-
-/************************************************************************************
- * Pre-processor Definitions
- ************************************************************************************/
-
-/* Clocking *************************************************************************/
-/* The auterion_fmu-v6s  board provides the following clock sources:
- *
- *   XTAL4: 24 MHz crystal for HSE
- *
- * So we have these clock source available within the STM32
- *
- *   HSI: 16 MHz RC factory-trimmed
- *   HSE: 24 MHz crystal for HSE
- */
-
-#define STM32_BOARD_XTAL        24000000ul
-
-#define STM32_HSI_FREQUENCY     16000000ul
-#define STM32_LSI_FREQUENCY     32000
-#define STM32_HSE_FREQUENCY     STM32_BOARD_XTAL
-#define STM32_LSE_FREQUENCY     32768
-
-/* Main PLL Configuration.
- *
- * PLL source is HSE = 24,000,000
- *
- * PLL_VCOx = (STM32_HSE_FREQUENCY / PLLM) * PLLN
- * Subject to:
- *
- *     1 <= PLLM <= 63
- *     4 <= PLLN <= 512
- *   150 MHz <= PLL_VCOL <= 420MHz
- *   192 MHz <= PLL_VCOH <= 836MHz
- *
- * SYSCLK  = PLL_VCO / PLLP
- * CPUCLK  = SYSCLK / D1CPRE
- * Subject to
- *
- *   PLLP1   = {2, 4, 6, 8, ..., 128}
- *   PLLP2,3 = {2, 3, 4, ..., 128}
- *   CPUCLK <= 480 MHz
- */
-
-#define STM32_BOARD_USEHSE
-
-#define STM32_PLLCFG_PLLSRC      RCC_PLLCKSELR_PLLSRC_HSE
-
-/* PLL1, wide 2 - 4 MHz input, enable DIVP, DIVQ, DIVR
- *
- *   PLL1_VCO = (24,000,000 / 12) * 450 = 900 MHz
- *
- *   PLL1P = PLL1_VCO/2  = 900 MHz /  2  = 450   MHz
- *   PLL1Q = PLL1_VCO/9  = 900 MHz /  9  = 100   MHz **used for ETH REF CLK via MCO1/2**
- *   PLL1R = PLL1_VCO/8  = 900 MHz /  8  = 112.5 MHz
- */
-
-#define STM32_PLLCFG_PLL1CFG    (RCC_PLLCFGR_PLL1VCOSEL_WIDE | \
-				 RCC_PLLCFGR_PLL1RGE_2_4_MHZ | \
-				 RCC_PLLCFGR_DIVP1EN | \
-				 RCC_PLLCFGR_DIVQ1EN | \
-				 RCC_PLLCFGR_DIVR1EN)
-#define STM32_PLLCFG_PLL1M       RCC_PLLCKSELR_DIVM1(12)
-#define STM32_PLLCFG_PLL1N       RCC_PLL1DIVR_N1(450)
-#define STM32_PLLCFG_PLL1P       RCC_PLL1DIVR_P1(2)
-#define STM32_PLLCFG_PLL1Q       RCC_PLL1DIVR_Q1(9)
-#define STM32_PLLCFG_PLL1R       RCC_PLL1DIVR_R1(8)
-
-#define STM32_VCO1_FREQUENCY     ((STM32_HSE_FREQUENCY / 12) * 450)
-#define STM32_PLL1P_FREQUENCY    (STM32_VCO1_FREQUENCY / 2)
-#define STM32_PLL1Q_FREQUENCY    (STM32_VCO1_FREQUENCY / 9)
-#define STM32_PLL1R_FREQUENCY    (STM32_VCO1_FREQUENCY / 8)
-
-/* PLL2 */
-
-#define STM32_PLLCFG_PLL2CFG     (RCC_PLLCFGR_PLL2VCOSEL_WIDE | \
-				  RCC_PLLCFGR_PLL2RGE_4_8_MHZ | \
-				  RCC_PLLCFGR_DIVP2EN | \
-				  RCC_PLLCFGR_DIVQ2EN | \
-				  RCC_PLLCFGR_DIVR2EN)
-#define STM32_PLLCFG_PLL2M       RCC_PLLCKSELR_DIVM2(6)
-#define STM32_PLLCFG_PLL2N       RCC_PLL2DIVR_N2(48)
-#define STM32_PLLCFG_PLL2P       RCC_PLL2DIVR_P2(2)
-#define STM32_PLLCFG_PLL2Q       RCC_PLL2DIVR_Q2(2)
-#define STM32_PLLCFG_PLL2R       RCC_PLL2DIVR_R2(2)
-
-#define STM32_VCO2_FREQUENCY     ((STM32_HSE_FREQUENCY / 6) * 48)
-#define STM32_PLL2P_FREQUENCY    (STM32_VCO2_FREQUENCY / 2)
-#define STM32_PLL2Q_FREQUENCY    (STM32_VCO2_FREQUENCY / 2)
-#define STM32_PLL2R_FREQUENCY    (STM32_VCO2_FREQUENCY / 2)
-
-/* PLL3 */
-
-#define STM32_PLLCFG_PLL3CFG    (RCC_PLLCFGR_PLL3VCOSEL_WIDE | \
-				 RCC_PLLCFGR_PLL3RGE_4_8_MHZ | \
-				 RCC_PLLCFGR_DIVQ3EN)
-#define STM32_PLLCFG_PLL3M      RCC_PLLCKSELR_DIVM3(6)
-#define STM32_PLLCFG_PLL3N      RCC_PLL3DIVR_N3(48)
-#define STM32_PLLCFG_PLL3P      RCC_PLL3DIVR_P3(2)
-#define STM32_PLLCFG_PLL3Q      RCC_PLL3DIVR_Q3(4)
-#define STM32_PLLCFG_PLL3R      RCC_PLL3DIVR_R3(2)
-
-#define STM32_VCO3_FREQUENCY    ((STM32_HSE_FREQUENCY / 6) * 48)
-#define STM32_PLL3P_FREQUENCY   (STM32_VCO3_FREQUENCY / 2)
-#define STM32_PLL3Q_FREQUENCY   (STM32_VCO3_FREQUENCY / 4)
-#define STM32_PLL3R_FREQUENCY   (STM32_VCO3_FREQUENCY / 2)
-
-/* SYSCLK = PLL1P = 450MHz
- * CPUCLK = SYSCLK / 1 = 450 MHz
- */
-
-#define STM32_RCC_D1CFGR_D1CPRE  (RCC_D1CFGR_D1CPRE_SYSCLK)
-#define STM32_SYSCLK_FREQUENCY   (STM32_PLL1P_FREQUENCY)
-#define STM32_CPUCLK_FREQUENCY   (STM32_SYSCLK_FREQUENCY / 1)
-
-/* Configure Clock Assignments */
-
-/* AHB clock (HCLK) is SYSCLK/2 (240 MHz max)
- * HCLK1 = HCLK2 = HCLK3 = HCLK4 = 225
- */
-
-#define STM32_RCC_D1CFGR_HPRE   RCC_D1CFGR_HPRE_SYSCLKd2        /* HCLK  = SYSCLK / 2 */
-#define STM32_ACLK_FREQUENCY    (STM32_CPUCLK_FREQUENCY / 2)    /* ACLK in D1, HCLK3 in D1 */
-#define STM32_HCLK_FREQUENCY    (STM32_CPUCLK_FREQUENCY / 2)    /* HCLK in D2, HCLK4 in D3 */
-#define STM32_BOARD_HCLK        STM32_HCLK_FREQUENCY            /* same as above, to satisfy compiler */
-
-/* APB1 clock (PCLK1) is HCLK/2 (112.5 MHz) */
-
-#define STM32_RCC_D2CFGR_D2PPRE1  RCC_D2CFGR_D2PPRE1_HCLKd2       /* PCLK1 = HCLK / 2 */
-#define STM32_PCLK1_FREQUENCY     (STM32_HCLK_FREQUENCY/2)
-
-/* APB2 clock (PCLK2) is HCLK/2 (112.5 MHz) */
-
-#define STM32_RCC_D2CFGR_D2PPRE2  RCC_D2CFGR_D2PPRE2_HCLKd2       /* PCLK2 = HCLK / 2 */
-#define STM32_PCLK2_FREQUENCY     (STM32_HCLK_FREQUENCY/2)
-
-/* APB3 clock (PCLK3) is HCLK/2 (112.5 MHz) */
-
-#define STM32_RCC_D1CFGR_D1PPRE   RCC_D1CFGR_D1PPRE_HCLKd2        /* PCLK3 = HCLK / 2 */
-#define STM32_PCLK3_FREQUENCY     (STM32_HCLK_FREQUENCY/2)
-
-/* APB4 clock (PCLK4) is HCLK/4 (112.5 MHz) */
-
-#define STM32_RCC_D3CFGR_D3PPRE   RCC_D3CFGR_D3PPRE_HCLKd2       /* PCLK4 = HCLK / 2 */
-#define STM32_PCLK4_FREQUENCY     (STM32_HCLK_FREQUENCY/2)
-
-/* Timer clock frequencies */
-
-/* Timers driven from APB1 will be twice PCLK1 */
-
-#define STM32_APB1_TIM2_CLKIN   (2*STM32_PCLK1_FREQUENCY)
-#define STM32_APB1_TIM3_CLKIN   (2*STM32_PCLK1_FREQUENCY)
-#define STM32_APB1_TIM4_CLKIN   (2*STM32_PCLK1_FREQUENCY)
-#define STM32_APB1_TIM5_CLKIN   (2*STM32_PCLK1_FREQUENCY)
-#define STM32_APB1_TIM6_CLKIN   (2*STM32_PCLK1_FREQUENCY)
-#define STM32_APB1_TIM7_CLKIN   (2*STM32_PCLK1_FREQUENCY)
-#define STM32_APB1_TIM12_CLKIN  (2*STM32_PCLK1_FREQUENCY)
-#define STM32_APB1_TIM13_CLKIN  (2*STM32_PCLK1_FREQUENCY)
-#define STM32_APB1_TIM14_CLKIN  (2*STM32_PCLK1_FREQUENCY)
-
-/* Timers driven from APB2 will be twice PCLK2 */
-
-#define STM32_APB2_TIM1_CLKIN   (2*STM32_PCLK2_FREQUENCY)
-#define STM32_APB2_TIM8_CLKIN   (2*STM32_PCLK2_FREQUENCY)
-#define STM32_APB2_TIM15_CLKIN  (2*STM32_PCLK2_FREQUENCY)
-#define STM32_APB2_TIM16_CLKIN  (2*STM32_PCLK2_FREQUENCY)
-#define STM32_APB2_TIM17_CLKIN  (2*STM32_PCLK2_FREQUENCY)
-
-/* Kernel Clock Configuration
- *
- * Note: look at Table 54 in ST Manual
- */
-
-/* I2C123 clock source */
-
-#define STM32_RCC_D2CCIP2R_I2C123SRC RCC_D2CCIP2R_I2C123SEL_HSI
-
-/* I2C4 clock source */
-
-#define STM32_RCC_D3CCIPR_I2C4SRC    RCC_D3CCIPR_I2C4SEL_HSI
-
-/* SPI123 clock source */
-
-#define STM32_RCC_D2CCIP1R_SPI123SRC RCC_D2CCIP1R_SPI123SEL_PLL2
-
-/* SPI45 clock source */
-
-#define STM32_RCC_D2CCIP1R_SPI45SRC  RCC_D2CCIP1R_SPI45SEL_PLL2
-
-/* SPI6 clock source */
-
-#define STM32_RCC_D3CCIPR_SPI6SRC    RCC_D3CCIPR_SPI6SEL_PLL2
-
-/* USB 1 and 2 clock source */
-
-#define STM32_RCC_D2CCIP2R_USBSRC    RCC_D2CCIP2R_USBSEL_PLL3
-
-/* ADC 1 2 3 clock source */
-
-#define STM32_RCC_D3CCIPR_ADCSRC     RCC_D3CCIPR_ADCSEL_PLL2
-
-/* FDCAN 1 2 clock source */
-
-#define STM32_RCC_D2CCIP1R_FDCANSEL  RCC_D2CCIP1R_FDCANSEL_HSE   /* FDCAN 1 2 clock source */
-
-#define STM32_FDCANCLK               STM32_HSE_FREQUENCY
-
-/* FLASH wait states
- *
- *  ------------ ---------- -----------
- *  Vcore        MAX ACLK   WAIT STATES
- *  ------------ ---------- -----------
- *  1.15-1.26 V     70 MHz    0
- *  (VOS1 level)   140 MHz    1
- *                 210 MHz    2
- *  1.05-1.15 V     55 MHz    0
- *  (VOS2 level)   110 MHz    1
- *                 165 MHz    2
- *                 220 MHz    3
- *  0.95-1.05 V     45 MHz    0
- *  (VOS3 level)    90 MHz    1
- *                 135 MHz    2
- *                 180 MHz    3
- *                 225 MHz    4
- *  ------------ ---------- -----------
- */
-
-#define BOARD_FLASH_WAITSTATES 2
-
-
-/* LED definitions ******************************************************************/
-/* The Auterion FMUV6S board has three, LED_GREEN a Green LED, LED_BLUE a Blue LED and
- * LED_RED a Red LED, that can be controlled by software.
- *
- * If CONFIG_ARCH_LEDS is not defined, then the user can control the LEDs in any way.
- * The following definitions are used to access individual LEDs.
- */
-
-/* LED index values for use with board_userled() */
-
-#define BOARD_LED1        0
-#define BOARD_LED2        1
-#define BOARD_LED3        2
-#define BOARD_NLEDS       3
-
-#define BOARD_LED_RED     BOARD_LED1
-#define BOARD_LED_GREEN   BOARD_LED2
-#define BOARD_LED_BLUE    BOARD_LED3
-
-/* LED bits for use with board_userled_all() */
-
-#define BOARD_LED1_BIT    (1 << BOARD_LED1)
-#define BOARD_LED2_BIT    (1 << BOARD_LED2)
-#define BOARD_LED3_BIT    (1 << BOARD_LED3)
-
-/* If CONFIG_ARCH_LEDS is defined, the usage by the board port is defined in
- * include/board.h and src/stm32_leds.c. The LEDs are used to encode OS-related
- * events as follows:
- *
- *
- *   SYMBOL                     Meaning                      LED state
- *                                                        Red   Green  Blue
- *   ----------------------  --------------------------  ------ ------ ----*/
-
-#define LED_STARTED        0 /* NuttX has been started   OFF    OFF   OFF  */
-#define LED_HEAPALLOCATE   1 /* Heap has been allocated  OFF    OFF   ON   */
-#define LED_IRQSENABLED    2 /* Interrupts enabled       OFF    ON    OFF  */
-#define LED_STACKCREATED   3 /* Idle stack created       OFF    ON    ON   */
-#define LED_INIRQ          4 /* In an interrupt          N/C    N/C   GLOW */
-#define LED_SIGNAL         5 /* In a signal handler      N/C    GLOW  N/C  */
-#define LED_ASSERTION      6 /* An assertion failed      GLOW   N/C   GLOW */
-#define LED_PANIC          7 /* The system has crashed   Blink  OFF   N/C  */
-#define LED_IDLE           8 /* MCU is is sleep mode     ON     OFF   OFF  */
-
-/* Thus if the Green LED is statically on, NuttX has successfully booted and
- * is, apparently, running normally.  If the Red LED is flashing at
- * approximately 2Hz, then a fatal error has been detected and the system
- * has halted.
- */
-
-/* Alternate function pin selections ************************************************/
-
-/* ADC1 */
-
-#define GPIO_ADC1_INP16      GPIO_ADC1_INP16_0                     /* PA0 */
-#define GPIO_ADC123_INP10    GPIO_ADC123_INP10_0                   /* PC0 */
-#define GPIO_ADC12_INP15     GPIO_ADC12_INP15_0                    /* PA3 */
-#define GPIO_ADC12_INP13     GPIO_ADC12_INP13_0                    /* PC3 */
-#define GPIO_ADC12_INP5      GPIO_ADC12_INP5_0                     /* PB1 */
-#define GPIO_ADC12_INP18     GPIO_ADC12_INP18_0                    /* PA4 */
-
-/* Trace */
-
-#define GPIO_TRACESWO GPIO_TRACESWO_0
-
-/* U[S]ARTs */
-
-
-#define GPIO_USART1_RX   GPIO_USART1_RX_2                          /* PA10 */
-#define GPIO_USART1_TX  (GPIO_USART1_TX_2 | GPIO_SPEED_25MHz)      /* PA9 */
-#define GPIO_USART1_RTS  GPIO_USART1_RTS_0                         /* PA12 */
-#define GPIO_USART1_CTS  GPIO_USART1_CTS_NSS_0                     /* PA11 */
-
-#define GPIO_USART2_RX   GPIO_USART2_RX_2                          /* PD6 */
-#define GPIO_USART2_TX  (GPIO_USART2_TX_2 | GPIO_SPEED_25MHz)      /* PD5 */
-#define GPIO_USART2_RTS  0                                         /* PD4 */
-#define GPIO_USART2_CTS  0                                         /* PD3 */
-
-#define GPIO_USART3_RX   GPIO_USART3_RX_3                          /* PD9 */
-#define GPIO_USART3_TX  (GPIO_USART3_TX_3 | GPIO_SPEED_2MHz)       /* PD8 */
-
-#define GPIO_UART4_RX    GPIO_UART4_RX_5                           /* PD0 */
-#define GPIO_UART4_TX   (GPIO_UART4_TX_5 | GPIO_SPEED_2MHz)        /* PD1 */
-
-#define GPIO_UART5_RX   (GPIO_UART5_RX_3 | GPIO_SPEED_2MHz)        /* PD2 */
-#define GPIO_UART5_TX    0    /* We did not route out the TX pin of UART5 */
-
-#define GPIO_UART7_RX    0    /* We did not route out the RX pin of UART7 */
-#define GPIO_UART7_TX   (GPIO_UART7_TX_3 | GPIO_SPEED_2MHz)        /* PE8 */
-
-#define GPIO_UART8_RX    GPIO_UART8_RX_1                           /* PE0 */
-#define GPIO_UART8_TX   (GPIO_UART8_TX_1 | GPIO_SPEED_2MHz)        /* PE1 */
-
-
-/* CAN
- *
- * CAN1 is routed to transceiver.
- */
-#define GPIO_CAN1_RX     (GPIO_CAN1_RX_2 | GPIO_SPEED_50MHz)       /* PB8 */
-#define GPIO_CAN1_TX     (GPIO_CAN1_TX_2 | GPIO_SPEED_50MHz)       /* PB9 */
-
-/* SPI
- * SPI1 is sensors1
- * SPI2 is sensors2
- * SPI3 is sensors3
- * SPI4 is FRAM
- *
- */
-
-#define GPIO_SPI1_MISO      (GPIO_SPI1_MISO_1 | GPIO_SPEED_50MHz)  /* PA6 */
-#define GPIO_SPI1_MOSI      (GPIO_SPI1_MOSI_3 | GPIO_SPEED_50MHz)  /* PD7 */
-#define GPIO_SPI1_SCK       (GPIO_SPI1_SCK_1  | GPIO_SPEED_50MHz)  /* PA5 */
-
-#define GPIO_SPI2_MISO      (GPIO_SPI2_MISO_2 | GPIO_SPEED_50MHz)  /* PC2 */
-#define GPIO_SPI2_MOSI      (GPIO_SPI2_MOSI_1 | GPIO_SPEED_50MHz)  /* PB15 */
-#define GPIO_SPI2_SCK       (GPIO_SPI2_SCK_3  | GPIO_SPEED_50MHz)  /* PB10 */
-
-
-#define GPIO_SPI3_MISO      (GPIO_SPI3_MISO_2 | GPIO_SPEED_50MHz)  /* PC11 */
-#define GPIO_SPI3_MOSI      (GPIO_SPI3_MOSI_3 | GPIO_SPEED_50MHz)  /* PB2 */
-#define GPIO_SPI3_SCK       (GPIO_SPI3_SCK_2  | GPIO_SPEED_50MHz)  /* PC10 */
-
-
-#define GPIO_SPI4_MISO     (GPIO_SPI4_MISO_2 | GPIO_SPEED_50MHz)  /* PE5 */
-#define GPIO_SPI4_MOSI     (GPIO_SPI4_MOSI_2 | GPIO_SPEED_50MHz)  /* PE6 */
-#define GPIO_SPI4_SCK      (GPIO_SPI4_SCK_2  | GPIO_SPEED_50MHz)  /* PE2 */
-
-/* I2C
- *
- *   The optional _GPIO configurations allow the I2C driver to manually
- *   reset the bus to clear stuck slaves.  They match the pin configuration,
- *   but are normally-high GPIOs.
- *
- */
-
-#define GPIO_I2C1_SCL        (GPIO_I2C1_SCL_1 | GPIO_SPEED_2MHz)         /* PB6 */
-#define GPIO_I2C1_SDA        (GPIO_I2C1_SDA_1 | GPIO_SPEED_2MHz)         /* PB7 */
-#define GPIO_I2C1_SCL_GPIO   (GPIO_OUTPUT | GPIO_OPENDRAIN |GPIO_SPEED_2MHz | GPIO_OUTPUT_SET | GPIO_PORTB | GPIO_PIN6)
-#define GPIO_I2C1_SDA_GPIO   (GPIO_OUTPUT | GPIO_OPENDRAIN |GPIO_SPEED_2MHz | GPIO_OUTPUT_SET | GPIO_PORTB | GPIO_PIN7)
-
-#define GPIO_I2C4_SCL        (GPIO_I2C4_SCL_1 | GPIO_SPEED_2MHz)         /* PD12 */
-#define GPIO_I2C4_SDA        (GPIO_I2C4_SDA_1 | GPIO_SPEED_2MHz)         /* PD13 */
-#define GPIO_I2C4_SCL_GPIO   (GPIO_OUTPUT | GPIO_OPENDRAIN | GPIO_SPEED_2MHz | GPIO_OUTPUT_SET | GPIO_PORTD | GPIO_PIN12)
-#define GPIO_I2C4_SDA_GPIO   (GPIO_OUTPUT | GPIO_OPENDRAIN | GPIO_SPEED_2MHz | GPIO_OUTPUT_SET | GPIO_PORTD | GPIO_PIN13)
-
-
-/* The STM32H7 connects MAC-to-MAC to iMX8MP
- *
- *   STM32H7  BOARD
- *   GPIO     SIGNAL       PIN NAME
- *   -------- ------------ -------------
- *   PA7     ETH_CRS_DV    CRS_DV
- *   PC1     ETH_MDC       MDC
- *   PA2     ETH_MDIO      MDIO
- *   PA1     ETH_REF_CL    X1
- *   PC4     ETH_RXD0      RX_D0
- *   PC5     ETH_RXD1      RX_D1
- *   PB11    ETH_TX_EN     TX_EN
- *   PB12    ETH_TXD0      TX_D0
- *   PB13    ETH_TXD1      TX_D1
- *
- * The PHY address is 1, since COL/PHYAD0 features a pull up.
- */
-
-#define GPIO_ETH_MDC              GPIO_ETH_MDC_0                              /* PC1 */
-#define GPIO_ETH_MDIO             GPIO_ETH_MDIO_0                             /* PA2 */
-#define GPIO_ETH_RMII_CRS_DV      GPIO_ETH_RMII_CRS_DV_0                      /* PA7 */
-#define GPIO_ETH_RMII_REF_CLK     GPIO_ETH_RMII_REF_CLK_0                     /* PA1 */
-
-#define GPIO_ETH_RMII_RXD0        GPIO_ETH_RMII_RXD0_0                        /* PC4 */
-#define GPIO_ETH_RMII_RXD1        GPIO_ETH_RMII_RXD1_0                        /* PC5 */
-
-#define GPIO_ETH_RMII_TX_EN      (GPIO_ETH_RMII_TX_EN_1 | GPIO_SPEED_100MHz)  /* PB11 */
-#define GPIO_ETH_RMII_TXD0       (GPIO_ETH_RMII_TXD0_1 | GPIO_SPEED_100MHz)   /* PB12 */
-#define GPIO_ETH_RMII_TXD1       (GPIO_ETH_RMII_TXD1_1 | GPIO_SPEED_100MHz)   /* PB13 */
-
-
-/* Board provides GPIO or other Hardware for signaling to timing analyzer */
-
-#if defined(CONFIG_BOARD_USE_PROBES)
-# include "stm32_gpio.h"
-# define PROBE_N(n) (1<<((n)-1))
-# define PROBE_1    (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTE|GPIO_PIN9)   /* PE9  AUX1 */
-# define PROBE_2    (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTE|GPIO_PIN11)  /* PE11 AUX2 */
-# define PROBE_3    (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTE|GPIO_PIN13)  /* PE13 AUX3 */
-# define PROBE_4    (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTE|GPIO_PIN14)  /* PE14 AUX4 */
-# define PROBE_5    (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTC|GPIO_PIN6)   /* PC6  AUX5 */
-# define PROBE_6    (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTB|GPIO_PIN5)   /* PB5  AUX6 */
-# define PROBE_7    (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTB|GPIO_PIN0)   /* PB0  AUX7 */
-# define PROBE_8    (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTC|GPIO_PIN9)   /* PC9  AUX8 */
-# define PROBE_9    (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTC|GPIO_PIN7)   /* PC7  CAP1 */
-
-# define PROBE_INIT(mask) \
-	do { \
-		if ((mask)& PROBE_N(1)) { stm32_configgpio(PROBE_1); } \
-		if ((mask)& PROBE_N(2)) { stm32_configgpio(PROBE_2); } \
-		if ((mask)& PROBE_N(3)) { stm32_configgpio(PROBE_3); } \
-		if ((mask)& PROBE_N(4)) { stm32_configgpio(PROBE_4); } \
-		if ((mask)& PROBE_N(5)) { stm32_configgpio(PROBE_5); } \
-		if ((mask)& PROBE_N(6)) { stm32_configgpio(PROBE_6); } \
-		if ((mask)& PROBE_N(7)) { stm32_configgpio(PROBE_7); } \
-		if ((mask)& PROBE_N(8)) { stm32_configgpio(PROBE_8); } \
-		if ((mask)& PROBE_N(9)) { stm32_configgpio(PROBE_9); } \
-	} while(0)
-
-# define PROBE(n,s)  do {stm32_gpiowrite(PROBE_##n,(s));}while(0)
-# define PROBE_MARK(n) PROBE(n,false);PROBE(n,true)
-#else
-# define PROBE_INIT(mask)
-# define PROBE(n,s)
-# define PROBE_MARK(n)
-#endif
-
-#endif  /*__NUTTX_CONFIG_PX4_FMU_V6S_INCLUDE_BOARD_H  */

boards/auterion/fmu-v6s/nuttx-config/include/board_dma_map.h

@@ -1,126 +0,0 @@
-/****************************************************************************
- *
- *   Copyright (c) 2020 PX4 Development Team. All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- * 3. Neither the name PX4 nor the names of its contributors may be
- *    used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ****************************************************************************/
-
-#pragma once
-
-/*
-FDCAN2 => no DMA, but dedicated message RAM
-ETH => has its own DMA engine
-I2C => has its own DMA engine
-
-The rest are general DMA engines:
-
-MDMA (D1): not supported by NuttX
-
-DMA1 (D2): 8 streams, mapped to DMAMUX1 requests 0-7
-
-DMA2 (D2): 8 streams, mapped to DMAMUX1 requests 8-15
-
-BDMA (D3): 8 streams, mapped to DMAMUX2 requests 0-7
-
-I2C1_RX => DMAMUX1:33 (EXT)
-I2C1_TX => DMAMUX1:34 (EXT)
-I2C4_RX => DMAMUX2:29 (BARO + MAG + EEPROM)
-I2C4_TX => DMAMUX2:30 (BARO + MAG + EEPROM)
-
-SPI3_RX => DMAMUX1:61 (IMU3 BMI088)
-SPI3_TX => DMAMUX1:62 (IMU3 BMI088)
-SPI4_RX => DMAMUX1:83 (FRAM)
-SPI4_TX => DMAMUX1:84 (FRAM)
-
-UART4_RX => DMAMUX1:63 (NSH DEBUG)
-UART4_TX => DMAMUX1:64 (NSH DEBUG)
-UART7_RX => DMAMUX1:79 (SBUS INPUT)
-UART7_RX => DMAMUX1:79 (ESC RX)
-UART8_RX => DMAMUX1:81 (GPS)
-UART8_TX => DMAMUX1:82 (GPS)
-USART3_RX => DMAMUX1:45 (EXTRAS)
-USART3_TX => DMAMUX1:46 (EXTRAS)
-
-USART1_RX => DMAMUX1:41 (MAVLINK)
-USART1_TX => DMAMUX1:42 (MAVLINK)
-USART2_RX => DMAMUX1:43 (NSH IMX)
-USART2_TX => DMAMUX1:44 (NSH IMX)
-
-(TIM1_CH1 => DMAMUX1:11)
-(TIM1_CH2 => DMAMUX1:12)
-(TIM1_CH3 => DMAMUX1:13)
-(TIM1_CH4 => DMAMUX1:14)
-TIM1_UP => DMAMUX1:15 (PWM)
-
-(TIM3_CH1 => DMAMUX1:23)
-(TIM3_CH2 => DMAMUX1:24)
-(TIM3_CH3 => DMAMUX1:25)
-(TIM3_CH4 => DMAMUX1:26)
-TIM3_UP => DMAMUX1:27 (PWM)
-
-TIM8_CH2 => DMAMUX1:48 (PPM INPUT)
-(TIM8_UP => DMAMUX1:51)
-
-*/
-
-
-
-// DMAMUX1 Using at most 8 Channels on DMA1 --------   Assigned
-//                                                     V
-
-#define DMAMAP_USART1_RX  DMAMAP_DMA12_USART1RX_0   /* 1 TELEM1 (MAVLINK) */
-#define DMAMAP_USART1_TX  DMAMAP_DMA12_USART1TX_0   /* 2 TELEM1 (MAVLINK) */
-
-#define DMAMAP_UART8_RX   DMAMAP_DMA12_UART8RX_0    /* 3 GPS1 */
-#define DMAMAP_UART8_TX   DMAMAP_DMA12_UART8TX_0    /* 4 GPS1 */
-
-#define DMAMAP_USART2_TX  DMAMAP_DMA12_USART2TX_0   /* 5 NSH IMX TX */
-#define DMAMAP_UART4_TX   DMAMAP_DMA12_UART4TX_0    /* 6 NSH DBG TX */
-
-// Assigned in timer_config.cpp
-
-// Timer 1                                          /* 7 TIM1UP */
-// Timer 3                                          /* 8 TIM3UP */
-
-
-
-// DMAMUX2 Using at most 8 Channels on DMA2 --------   Assigned
-//                                                     V
-
-#define DMAMAP_SPI3_RX    DMAMAP_DMA12_SPI3RX_1     /* 1 BMI088 */
-#define DMAMAP_SPI3_TX    DMAMAP_DMA12_SPI3TX_1     /* 2 BMI088 */
-
-#define DMAMAP_SPI4_RX    DMAMAP_DMA12_SPI4RX_1     /* 3 FRAM */
-#define DMAMAP_SPI4_TX    DMAMAP_DMA12_SPI4TX_1     /* 4 FRAM */
-
-#define DMAMAP_USART3_RX  DMAMAP_DMA12_USART3RX_1   /* 5 TELEM2 */
-#define DMAMAP_USART3_TX  DMAMAP_DMA12_USART3TX_1   /* 6 TELEM2 */
-
-#define DMAMAP_UART5_RX   DMAMAP_DMA12_UART5RX_1    /* 7 SBUS IN */
-#define DMAMAP_UART7_RX   DMAMAP_DMA12_UART7RX_1    /* 8 ESC IN */

boards/auterion/fmu-v6s/nuttx-config/nsh/defconfig

@@ -1,301 +0,0 @@
-#
-# This file is autogenerated: PLEASE DO NOT EDIT IT.
-#
-# You can use "make menuconfig" to make any modifications to the installed .config file.
-# You can then do "make savedefconfig" to generate a new defconfig file that includes your
-# modifications.
-#
-# CONFIG_DISABLE_ENVIRON is not set
-# CONFIG_DISABLE_PSEUDOFS_OPERATIONS is not set
-# CONFIG_DISABLE_PTHREAD is not set
-# CONFIG_NSH_DISABLEBG is not set
-# CONFIG_NSH_DISABLESCRIPT is not set
-# CONFIG_NSH_DISABLE_ARP is not set
-# CONFIG_NSH_DISABLE_CAT is not set
-# CONFIG_NSH_DISABLE_CD is not set
-# CONFIG_NSH_DISABLE_CP is not set
-# CONFIG_NSH_DISABLE_DATE is not set
-# CONFIG_NSH_DISABLE_DF is not set
-# CONFIG_NSH_DISABLE_ECHO is not set
-# CONFIG_NSH_DISABLE_ENV is not set
-# CONFIG_NSH_DISABLE_EXEC is not set
-# CONFIG_NSH_DISABLE_EXPORT is not set
-# CONFIG_NSH_DISABLE_FREE is not set
-# CONFIG_NSH_DISABLE_GET is not set
-# CONFIG_NSH_DISABLE_HELP is not set
-# CONFIG_NSH_DISABLE_IFCONFIG is not set
-# CONFIG_NSH_DISABLE_IFUPDOWN is not set
-# CONFIG_NSH_DISABLE_ITEF is not set
-# CONFIG_NSH_DISABLE_KILL is not set
-# CONFIG_NSH_DISABLE_LOOPS is not set
-# CONFIG_NSH_DISABLE_LS is not set
-# CONFIG_NSH_DISABLE_MKDIR is not set
-# CONFIG_NSH_DISABLE_MKFATFS is not set
-# CONFIG_NSH_DISABLE_MOUNT is not set
-# CONFIG_NSH_DISABLE_MV is not set
-# CONFIG_NSH_DISABLE_NSLOOKUP is not set
-# CONFIG_NSH_DISABLE_PS is not set
-# CONFIG_NSH_DISABLE_PSSTACKUSAGE is not set
-# CONFIG_NSH_DISABLE_PWD is not set
-# CONFIG_NSH_DISABLE_RM is not set
-# CONFIG_NSH_DISABLE_RMDIR is not set
-# CONFIG_NSH_DISABLE_SEMICOLON is not set
-# CONFIG_NSH_DISABLE_SET is not set
-# CONFIG_NSH_DISABLE_SLEEP is not set
-# CONFIG_NSH_DISABLE_SOURCE is not set
-# CONFIG_NSH_DISABLE_TELNETD is not set
-# CONFIG_NSH_DISABLE_TEST is not set
-# CONFIG_NSH_DISABLE_TIME is not set
-# CONFIG_NSH_DISABLE_UMOUNT is not set
-# CONFIG_NSH_DISABLE_UNSET is not set
-# CONFIG_NSH_DISABLE_USLEEP is not set
-# CONFIG_STM32H7_USE_LEGACY_PINMAP is not set
-CONFIG_ARCH="arm"
-CONFIG_ARCH_BOARD_CUSTOM=y
-CONFIG_ARCH_BOARD_CUSTOM_DIR="../../../../boards/auterion/fmu-v6s/nuttx-config"
-CONFIG_ARCH_BOARD_CUSTOM_DIR_RELPATH=y
-CONFIG_ARCH_BOARD_CUSTOM_NAME="auterion"
-CONFIG_ARCH_CHIP="stm32h7"
-CONFIG_ARCH_CHIP_STM32H743VI=y
-CONFIG_ARCH_CHIP_STM32H7=y
-CONFIG_ARCH_INTERRUPTSTACK=768
-CONFIG_ARCH_STACKDUMP=y
-CONFIG_ARMV7M_BASEPRI_WAR=y
-CONFIG_ARMV7M_DCACHE=y
-CONFIG_ARMV7M_DTCM=y
-CONFIG_ARMV7M_ICACHE=y
-CONFIG_ARMV7M_MEMCPY=y
-CONFIG_ARMV7M_USEBASEPRI=y
-CONFIG_ARM_MPU_EARLY_RESET=y
-CONFIG_POSIX_SPAWN_PROXY_STACKSIZE=4096
-CONFIG_BOARDCTL_RESET=y
-CONFIG_BOARD_ASSERT_RESET_VALUE=0
-CONFIG_BOARD_CRASHDUMP=y
-CONFIG_BOARD_LOOPSPERMSEC=95751
-CONFIG_BOARD_RESET_ON_ASSERT=2
-CONFIG_BUILTIN=y
-CONFIG_DEBUG_FULLOPT=y
-CONFIG_DEBUG_HARDFAULT_ALERT=y
-CONFIG_DEBUG_MEMFAULT=y
-CONFIG_DEBUG_SYMBOLS=y
-CONFIG_DEBUG_TCBINFO=y
-CONFIG_DEFAULT_SMALL=y
-CONFIG_DEV_FIFO_SIZE=0
-CONFIG_DEV_PIPE_MAXSIZE=1024
-CONFIG_DEV_PIPE_SIZE=70
-CONFIG_ETH0_PHY_LAN8742A=y
-CONFIG_EXPERIMENTAL=y
-CONFIG_FAT_DMAMEMORY=y
-CONFIG_FAT_LCNAMES=y
-CONFIG_FAT_LFN=y
-CONFIG_FAT_LFN_ALIAS_HASH=y
-CONFIG_FDCLONE_STDIO=y
-CONFIG_FSUTILS_IPCFG=y
-CONFIG_FS_BINFS=y
-CONFIG_FS_CROMFS=y
-CONFIG_FS_FAT=y
-CONFIG_FS_FATTIME=y
-CONFIG_FS_LITTLEFS=y
-CONFIG_FS_LITTLEFS_BLOCK_CYCLE=-1
-CONFIG_FS_LITTLEFS_BLOCK_SIZE_FACTOR=4
-CONFIG_FS_LITTLEFS_LOOKAHEAD_SIZE=64
-CONFIG_FS_LITTLEFS_PROGRAM_SIZE_FACTOR=1
-CONFIG_FS_PROCFS=y
-CONFIG_FS_PROCFS_INCLUDE_PROGMEM=y
-CONFIG_FS_PROCFS_MAX_TASKS=64
-CONFIG_FS_PROCFS_REGISTER=y
-CONFIG_FS_ROMFS=y
-CONFIG_GRAN=y
-CONFIG_GRAN_INTR=y
-CONFIG_HAVE_CXX=y
-CONFIG_HAVE_CXXINITIALIZE=y
-CONFIG_I2C=y
-CONFIG_I2C_RESET=y
-CONFIG_IDLETHREAD_STACKSIZE=750
-CONFIG_INIT_ENTRYPOINT="nsh_main"
-CONFIG_INIT_STACKSIZE=4000
-CONFIG_IOB_NBUFFERS=24
-CONFIG_IOB_THROTTLE=0
-CONFIG_IPCFG_BINARY=y
-CONFIG_IPCFG_CHARDEV=y
-CONFIG_IPCFG_PATH="/fs/mtd_net"
-CONFIG_LIBC_FLOATINGPOINT=y
-CONFIG_LIBC_LONG_LONG=y
-CONFIG_LIBC_MAX_EXITFUNS=1
-CONFIG_LIBC_STRERROR=y
-CONFIG_MEMSET_64BIT=y
-CONFIG_MEMSET_OPTSPEED=y
-CONFIG_MM_REGIONS=4
-CONFIG_MTD=y
-CONFIG_MTD_BYTE_WRITE=y
-CONFIG_MTD_PARTITION=y
-CONFIG_MTD_PROGMEM=y
-CONFIG_MTD_RAMTRON=y
-CONFIG_NAME_MAX=40
-CONFIG_NET=y
-CONFIG_NETDB_DNSCLIENT=y
-CONFIG_NETDB_DNSCLIENT_ENTRIES=8
-CONFIG_NETDB_DNSSERVER_NOADDR=y
-CONFIG_NETDEV_PHY_IOCTL=y
-CONFIG_NETINIT_DNS=y
-CONFIG_NETINIT_DNSIPADDR=0xA290AFE
-CONFIG_NETINIT_DRIPADDR=0xA290AFE
-CONFIG_NETINIT_IPADDR=0xA290A02
-CONFIG_NETINIT_MONITOR=n
-CONFIG_NETINIT_THREAD=y
-CONFIG_NETINIT_THREAD_PRIORITY=49
-CONFIG_NET_ARP_IPIN=y
-CONFIG_NET_ARP_SEND=y
-CONFIG_NET_BROADCAST=y
-CONFIG_NET_ETH_PKTSIZE=1518
-CONFIG_NET_ICMP=y
-CONFIG_NET_ICMP_SOCKET=y
-CONFIG_NET_NACTIVESOCKETS=16
-CONFIG_NET_SOLINGER=y
-CONFIG_NET_UDP=y
-CONFIG_NET_UDP_CHECKSUMS=y
-CONFIG_NET_UDP_WRITE_BUFFERS=y
-CONFIG_NSH_ARCHINIT=y
-CONFIG_NSH_ARGCAT=y
-CONFIG_NSH_BUILTIN_APPS=y
-CONFIG_NSH_CMDPARMS=y
-CONFIG_NSH_CROMFSETC=y
-CONFIG_NSH_LINELEN=128
-CONFIG_NSH_MAXARGUMENTS=15
-CONFIG_NSH_NESTDEPTH=8
-CONFIG_NSH_QUOTE=y
-CONFIG_NSH_ROMFSETC=y
-CONFIG_NSH_ROMFSSECTSIZE=128
-CONFIG_NSH_STRERROR=y
-CONFIG_NSH_VARS=y
-CONFIG_PIPES=y
-CONFIG_PREALLOC_TIMERS=50
-CONFIG_PRIORITY_INHERITANCE=y
-CONFIG_PTHREAD_MUTEX_ROBUST=y
-CONFIG_PTHREAD_STACK_MIN=512
-CONFIG_RAMTRON_EMULATE_PAGE_SHIFT=5
-CONFIG_RAMTRON_EMULATE_SECTOR_SHIFT=5
-CONFIG_RAMTRON_SETSPEED=y
-CONFIG_RAM_SIZE=245760
-CONFIG_RAM_START=0x20010000
-CONFIG_RAW_BINARY=y
-CONFIG_READLINE_CMD_HISTORY=y
-CONFIG_READLINE_TABCOMPLETION=y
-CONFIG_RTC_DATETIME=y
-CONFIG_SCHED_HPWORK=y
-CONFIG_SCHED_HPWORKPRIORITY=249
-CONFIG_SCHED_HPWORKSTACKSIZE=1280
-CONFIG_SCHED_INSTRUMENTATION=y
-CONFIG_SCHED_INSTRUMENTATION_EXTERNAL=y
-CONFIG_SCHED_INSTRUMENTATION_SWITCH=y
-CONFIG_SCHED_LPWORK=y
-CONFIG_SCHED_LPWORKPRIORITY=50
-CONFIG_SCHED_LPWORKSTACKSIZE=1632
-CONFIG_SEM_PREALLOCHOLDERS=32
-CONFIG_SERIAL_IFLOWCONTROL_WATERMARKS=y
-CONFIG_SERIAL_TERMIOS=y
-CONFIG_SIG_DEFAULT=y
-CONFIG_SIG_SIGALRM_ACTION=y
-CONFIG_SIG_SIGUSR1_ACTION=y
-CONFIG_SIG_SIGUSR2_ACTION=y
-CONFIG_SIG_SIGWORK=4
-CONFIG_STACK_COLORATION=y
-CONFIG_START_DAY=30
-CONFIG_START_MONTH=11
-CONFIG_STDIO_BUFFER_SIZE=256
-CONFIG_STM32H7_ADC1=y
-CONFIG_STM32H7_ADC3=y
-CONFIG_STM32H7_BBSRAM=y
-CONFIG_STM32H7_BBSRAM_FILES=5
-CONFIG_STM32H7_BDMA=y
-CONFIG_STM32H7_BKPSRAM=y
-CONFIG_STM32H7_DMA1=y
-CONFIG_STM32H7_DMA2=y
-CONFIG_STM32H7_DMACAPABLE=y
-CONFIG_STM32H7_ETHMAC=y
-CONFIG_STM32H7_FLASH_OVERRIDE_I=y
-CONFIG_STM32H7_FLOWCONTROL_BROKEN=y
-CONFIG_STM32H7_I2C1=y
-CONFIG_STM32H7_I2C4=y
-CONFIG_STM32H7_I2C_DYNTIMEO=y
-CONFIG_STM32H7_I2C_DYNTIMEO_STARTSTOP=10
-CONFIG_STM32H7_PHY_POLLING=y
-CONFIG_STM32H7_NO_PHY=y
-CONFIG_STM32H7_AUTONEG=n
-CONFIG_STM32H7_ETHFD=y
-CONFIG_STM32H7_ETH100MBPS=y
-CONFIG_STM32H7_RMII_EXTCLK=y
-CONFIG_STM32H7_PROGMEM=y
-CONFIG_STM32H7_RTC=y
-CONFIG_STM32H7_RTC_AUTO_LSECLOCK_START_DRV_CAPABILITY=y
-CONFIG_STM32H7_RTC_MAGIC_REG=1
-CONFIG_STM32H7_SAVE_CRASHDUMP=y
-CONFIG_STM32H7_SERIALBRK_BSDCOMPAT=y
-CONFIG_STM32H7_SERIAL_DISABLE_REORDERING=y
-CONFIG_STM32H7_SPI3=y
-CONFIG_STM32H7_SPI3_DMA=y
-CONFIG_STM32H7_SPI3_DMA_BUFFER=1024
-CONFIG_STM32H7_SPI4=y
-CONFIG_STM32H7_SPI4_DMA=y
-CONFIG_STM32H7_SPI4_DMA_BUFFER=4096
-CONFIG_STM32H7_TIM12=y
-CONFIG_STM32H7_TIM1=y
-CONFIG_STM32H7_TIM3=y
-CONFIG_STM32H7_UART4=y
-CONFIG_STM32H7_UART5=y
-CONFIG_STM32H7_UART7=y
-CONFIG_STM32H7_UART8=y
-CONFIG_STM32H7_USART1=y
-CONFIG_STM32H7_USART2=y
-CONFIG_STM32H7_USART3=y
-CONFIG_STM32H7_USART_BREAKS=y
-CONFIG_STM32H7_USART_INVERT=y
-CONFIG_STM32H7_USART_SINGLEWIRE=y
-CONFIG_STM32H7_USART_SWAP=y
-CONFIG_SYSTEM_DHCPC_RENEW=y
-CONFIG_SYSTEM_NSH=y
-CONFIG_SYSTEM_PING=y
-CONFIG_SYSTEM_SYSTEM=y
-CONFIG_TASK_NAME_SIZE=24
-
-CONFIG_USART1_BAUD=3000000
-CONFIG_USART1_IFLOWCONTROL=y
-CONFIG_USART1_OFLOWCONTROL=y
-CONFIG_USART1_RXBUFSIZE=1500
-CONFIG_USART1_TXBUFSIZE=10000
-CONFIG_USART1_RXDMA=y
-CONFIG_USART1_TXDMA=y
-
-CONFIG_USART2_BAUD=57600
-CONFIG_USART2_RXBUFSIZE=500
-CONFIG_USART2_TXBUFSIZE=1500
-CONFIG_USART2_TXDMA=y
-CONFIG_USART2_SERIAL_CONSOLE=y
-
-CONFIG_USART3_BAUD=57600
-CONFIG_USART3_RXBUFSIZE=600
-CONFIG_USART3_TXBUFSIZE=3000
-CONFIG_USART3_RXDMA=y
-CONFIG_USART3_TXDMA=y
-
-CONFIG_UART4_BAUD=57600
-CONFIG_UART4_RXBUFSIZE=500
-CONFIG_UART4_TXBUFSIZE=1500
-CONFIG_UART4_TXDMA=y
-
-CONFIG_UART5_BAUD=100000
-CONFIG_UART5_RXBUFSIZE=600
-CONFIG_UART5_RXDMA=y
-
-CONFIG_UART7_BAUD=115200
-CONFIG_UART7_RXBUFSIZE=600
-CONFIG_UART7_RXDMA=y
-
-CONFIG_UART8_BAUD=57600
-CONFIG_UART8_RXBUFSIZE=600
-CONFIG_UART8_TXBUFSIZE=1500
-CONFIG_UART8_RXDMA=y
-CONFIG_UART8_TXDMA=y
-
-CONFIG_USEC_PER_TICK=1000
-CONFIG_WATCHDOG=y

boards/auterion/fmu-v6s/nuttx-config/scripts/bootloader_script.ld

@@ -1,215 +0,0 @@
-/****************************************************************************
- * scripts/script.ld
- *
- *   Copyright (C) 2016, 2019 Gregory Nutt. All rights reserved.
- *   Author: Gregory Nutt <gnutt@nuttx.org>
- *
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- * 3. Neither the name NuttX nor the names of its contributors may be
- *    used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ****************************************************************************/
-
-/* The Auterion FMUV6S uses an STM32H743VI has 2048Kb of main FLASH memory.
- * The flash memory is partitioned into a User Flash memory and a System
- * Flash memory. Each of these memories has two banks:
- *
- *   1) User Flash memory:
- *
- *      Bank 1: Start address 0x0800:0000 to 0x080F:FFFF with 8 sectors, 128Kb each
- *      Bank 2: Start address 0x0810:0000 to 0x081F:FFFF with 8 sectors, 128Kb each
- *
- *   2) System Flash memory:
- *
- *      Bank 1: Start address 0x1FF0:0000 to 0x1FF1:FFFF with 1 x 128Kb sector
- *      Bank 1: Start address 0x1FF4:0000 to 0x1FF5:FFFF with 1 x 128Kb sector
- *
- *   3) User option bytes for user configuration, only in Bank 1.
- *
- * In the STM32H743VI, two different boot spaces can be selected through
- * the BOOT pin and the boot base address programmed in the BOOT_ADD0 and
- * BOOT_ADD1 option bytes:
- *
- *   1) BOOT=0: Boot address defined by user option byte BOOT_ADD0[15:0].
- *      ST programmed value: Flash memory at 0x0800:0000
- *   2) BOOT=1: Boot address defined by user option byte BOOT_ADD1[15:0].
- *      ST programmed value: System bootloader at 0x1FF0:0000
- *
- * The Auterion FMUV6S has a test point on board, the BOOT0 pin is at ground so by
- * default, the STM32 will boot to address 0x0800:0000 in FLASH unless the test
- * point is pulled to 3.3V.then the boot will be from 0x1FF0:0000
- *
- * The STM32H743VI also has 1024Kb of data SRAM.
- * SRAM is split up into several blocks and into three power domains:
- *
- *   1) TCM SRAMs are dedicated to the Cortex-M7 and are accessible with
- *      0 wait states by the Cortex-M7 and by MDMA through AHBS slave bus
- *
- *      1.1) 128Kb of DTCM-RAM beginning at address 0x2000:0000
- *
- *           The DTCM-RAM is organized as 2 x 64Kb DTCM-RAMs on 2 x 32 bit
- *           DTCM ports. The DTCM-RAM could be used for critical real-time
- *           data, such as interrupt service routines or stack / heap memory.
- *           Both DTCM-RAMs can be used in parallel (for load/store operations)
- *           thanks to the Cortex-M7 dual issue capability.
- *
- *      1.2)  64Kb of ITCM-RAM beginning at address 0x0000:0000
- *
- *           This RAM is connected to ITCM 64-bit interface designed for
- *           execution of critical real-times routines by the CPU.
- *
- *   2) AXI SRAM (D1 domain) accessible by all system masters except BDMA
- *      through D1 domain AXI bus matrix
- *
- *      2.1) 512Kb of SRAM beginning at address 0x2400:0000
- *
- *   3) AHB SRAM (D2 domain) accessible by all system masters except BDMA
- *      through D2 domain AHB bus matrix
- *
- *      3.1) 128Kb of SRAM1 beginning at address 0x3000:0000
- *      3.2) 128Kb of SRAM2 beginning at address 0x3002:0000
- *      3.3)  32Kb of SRAM3 beginning at address 0x3004:0000
- *
- *      SRAM1 - SRAM3 are one contiguous block: 288Kb at address 0x3000:0000
- *
- *   4) AHB SRAM (D3 domain) accessible by most of system masters
- *      through D3 domain AHB bus matrix
- *
- *      4.1)  64Kb of SRAM4 beginning at address 0x3800:0000
- *      4.1)   4Kb of backup RAM beginning at address 0x3880:0000
- *
- * When booting from FLASH, FLASH memory is aliased to address 0x0000:0000
- * where the code expects to begin execution by jumping to the entry point in
- * the 0x0800:0000 address range.
- *
- * The bootloader uses the first sector of the flash, which is 128K in length.
- */
-
-MEMORY
-{
-	itcm  (rwx) : ORIGIN = 0x00000000, LENGTH =   64K
-	flash (rx)  : ORIGIN = 0x08000000, LENGTH =  128K
-	dtcm1 (rwx) : ORIGIN = 0x20000000, LENGTH =   64K
-	dtcm2 (rwx) : ORIGIN = 0x20010000, LENGTH =   64K
-	sram  (rwx) : ORIGIN = 0x24000000, LENGTH =  512K
-	sram1 (rwx) : ORIGIN = 0x30000000, LENGTH =  128K
-	sram2 (rwx) : ORIGIN = 0x30020000, LENGTH =  128K
-	sram3 (rwx) : ORIGIN = 0x30040000, LENGTH =   32K
-	sram4 (rwx) : ORIGIN = 0x38000000, LENGTH =   64K
-	bbram (rwx) : ORIGIN = 0x38800000, LENGTH =    4K
-}
-
-OUTPUT_ARCH(arm)
-EXTERN(_vectors)
-ENTRY(_stext)
-
-/*
- * Ensure that abort() is present in the final object.  The exception handling
- * code pulled in by libgcc.a requires it (and that code cannot be easily avoided).
- */
-EXTERN(abort)
-EXTERN(_bootdelay_signature)
-
-SECTIONS
-{
-	.text : {
-		_stext = ABSOLUTE(.);
-		*(.vectors)
-		. = ALIGN(32);
-		/*
-		This signature provides the bootloader with a way to delay booting
-		*/
-		_bootdelay_signature = ABSOLUTE(.);
-		FILL(0xffecc2925d7d05c5)
-		. += 8;
-		*(.text .text.*)
-		*(.fixup)
-		*(.gnu.warning)
-		*(.rodata .rodata.*)
-		*(.gnu.linkonce.t.*)
-		*(.glue_7)
-		*(.glue_7t)
-		*(.got)
-		*(.gcc_except_table)
-		*(.gnu.linkonce.r.*)
-		_etext = ABSOLUTE(.);
-
-	} > flash
-
-	/*
-	 * Init functions (static constructors and the like)
-	 */
-	.init_section : {
-		_sinit = ABSOLUTE(.);
-		KEEP(*(.init_array .init_array.*))
-		_einit = ABSOLUTE(.);
-	} > flash
-
-
-	.ARM.extab : {
-		*(.ARM.extab*)
-	} > flash
-
-	__exidx_start = ABSOLUTE(.);
-	.ARM.exidx : {
-		*(.ARM.exidx*)
-	} > flash
-	__exidx_end = ABSOLUTE(.);
-
-	_eronly = ABSOLUTE(.);
-
-	.data : {
-		_sdata = ABSOLUTE(.);
-		*(.data .data.*)
-		*(.gnu.linkonce.d.*)
-		CONSTRUCTORS
-		_edata = ABSOLUTE(.);
-	} > sram AT > flash
-
-	.bss : {
-		_sbss = ABSOLUTE(.);
-		*(.bss .bss.*)
-		*(.gnu.linkonce.b.*)
-		*(COMMON)
-		. = ALIGN(4);
-		_ebss = ABSOLUTE(.);
-	} > sram
-
-	/* Stabs debugging sections. */
-	.stab 0 : { *(.stab) }
-	.stabstr 0 : { *(.stabstr) }
-	.stab.excl 0 : { *(.stab.excl) }
-	.stab.exclstr 0 : { *(.stab.exclstr) }
-	.stab.index 0 : { *(.stab.index) }
-	.stab.indexstr 0 : { *(.stab.indexstr) }
-	.comment 0 : { *(.comment) }
-	.debug_abbrev 0 : { *(.debug_abbrev) }
-	.debug_info 0 : { *(.debug_info) }
-	.debug_line 0 : { *(.debug_line) }
-	.debug_pubnames 0 : { *(.debug_pubnames) }
-	.debug_aranges 0 : { *(.debug_aranges) }
-}

boards/auterion/fmu-v6s/nuttx-config/scripts/script.ld

@@ -1,229 +0,0 @@
-/****************************************************************************
- * scripts/script.ld
- *
- *   Copyright (C) 2016, 2019 Gregory Nutt. All rights reserved.
- *   Author: Gregory Nutt <gnutt@nuttx.org>
- *
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- * 3. Neither the name NuttX nor the names of its contributors may be
- *    used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ****************************************************************************/
-
-/* The Auterion FMUV6S uses an STM32H743VI has 2048Kb of main FLASH memory.
- * The flash memory is partitioned into a User Flash memory and a System
- * Flash memory. Each of these memories has two banks:
- *
- *   1) User Flash memory:
- *
- *      Bank 1: Start address 0x0800:0000 to 0x080F:FFFF with 8 sectors, 128Kb each
- *      Bank 2: Start address 0x0810:0000 to 0x081F:FFFF with 8 sectors, 128Kb each
- *
- *   2) System Flash memory:
- *
- *      Bank 1: Start address 0x1FF0:0000 to 0x1FF1:FFFF with 1 x 128Kb sector
- *      Bank 1: Start address 0x1FF4:0000 to 0x1FF5:FFFF with 1 x 128Kb sector
- *
- *   3) User option bytes for user configuration, only in Bank 1.
- *
- * In the STM32H743VI, two different boot spaces can be selected through
- * the BOOT pin and the boot base address programmed in the BOOT_ADD0 and
- * BOOT_ADD1 option bytes:
- *
- *   1) BOOT=0: Boot address defined by user option byte BOOT_ADD0[15:0].
- *      ST programmed value: Flash memory at 0x0800:0000
- *   2) BOOT=1: Boot address defined by user option byte BOOT_ADD1[15:0].
- *      ST programmed value: System bootloader at 0x1FF0:0000
- *
- * The Auterion FMUV6S has a test point on board, the BOOT0 pin is at ground so by
- * default, the STM32 will boot to address 0x0800:0000 in FLASH unless the test
- * point is pulled to 3.3V.then the boot will be from 0x1FF0:0000
- *
- * The STM32H743VI also has 1024Kb of data SRAM.
- * SRAM is split up into several blocks and into three power domains:
- *
- *   1) TCM SRAMs are dedicated to the Cortex-M7 and are accessible with
- *      0 wait states by the Cortex-M7 and by MDMA through AHBS slave bus
- *
- *      1.1) 128Kb of DTCM-RAM beginning at address 0x2000:0000
- *
- *           The DTCM-RAM is organized as 2 x 64Kb DTCM-RAMs on 2 x 32 bit
- *           DTCM ports. The DTCM-RAM could be used for critical real-time
- *           data, such as interrupt service routines or stack / heap memory.
- *           Both DTCM-RAMs can be used in parallel (for load/store operations)
- *           thanks to the Cortex-M7 dual issue capability.
- *
- *      1.2)  64Kb of ITCM-RAM beginning at address 0x0000:0000
- *
- *           This RAM is connected to ITCM 64-bit interface designed for
- *           execution of critical real-times routines by the CPU.
- *
- *   2) AXI SRAM (D1 domain) accessible by all system masters except BDMA
- *      through D1 domain AXI bus matrix
- *
- *      2.1) 512Kb of SRAM beginning at address 0x2400:0000
- *
- *   3) AHB SRAM (D2 domain) accessible by all system masters except BDMA
- *      through D2 domain AHB bus matrix
- *
- *      3.1) 128Kb of SRAM1 beginning at address 0x3000:0000
- *      3.2) 128Kb of SRAM2 beginning at address 0x3002:0000
- *      3.3)  32Kb of SRAM3 beginning at address 0x3004:0000
- *
- *      SRAM1 - SRAM3 are one contiguous block: 288Kb at address 0x3000:0000
- *
- *   4) AHB SRAM (D3 domain) accessible by most of system masters
- *      through D3 domain AHB bus matrix
- *
- *      4.1)  64Kb of SRAM4 beginning at address 0x3800:0000
- *      4.1)   4Kb of backup RAM beginning at address 0x3880:0000
- *
- * When booting from FLASH, FLASH memory is aliased to address 0x0000:0000
- * where the code expects to begin execution by jumping to the entry point in
- * the 0x0800:0000 address range.
- */
-
-MEMORY
-{
-	ITCM_RAM  (rwx) : ORIGIN = 0x00000000, LENGTH =   64K
-	FLASH      (rx) : ORIGIN = 0x08020000, LENGTH = 1920K
-
-	DTCM1_RAM (rwx) : ORIGIN = 0x20000000, LENGTH =   64K
-	DTCM2_RAM (rwx) : ORIGIN = 0x20010000, LENGTH =   64K
-	AXI_SRAM  (rwx) : ORIGIN = 0x24000000, LENGTH =  512K /* D1 domain AXI bus */
-	SRAM1     (rwx) : ORIGIN = 0x30000000, LENGTH =  128K /* D2 domain AHB bus */
-	SRAM2     (rwx) : ORIGIN = 0x30020000, LENGTH =  128K /* D2 domain AHB bus */
-	SRAM3     (rwx) : ORIGIN = 0x30040000, LENGTH =   32K /* D2 domain AHB bus */
-	SRAM4     (rwx) : ORIGIN = 0x38000000, LENGTH =   64K /* D3 domain */
-	BKPRAM    (rwx) : ORIGIN = 0x38800000, LENGTH =    4K
-}
-
-OUTPUT_ARCH(arm)
-EXTERN(_vectors)
-ENTRY(_stext)
-
-/*
- * Ensure that abort() is present in the final object.  The exception handling
- * code pulled in by libgcc.a requires it (and that code cannot be easily avoided).
- */
-EXTERN(abort)
-EXTERN(_bootdelay_signature)
-EXTERN(board_get_manifest)
-
-SECTIONS
-{
-	.text : {
-		_stext = ABSOLUTE(.);
-		*(.vectors)
-		. = ALIGN(32);
-		/*
-		This signature provides the bootloader with a way to delay booting
-		*/
-		_bootdelay_signature = ABSOLUTE(.);
-		FILL(0xffecc2925d7d05c5)
-		. += 8;
-		*(.text .text.*)
-		*(.fixup)
-		*(.gnu.warning)
-		*(.rodata .rodata.*)
-		*(.gnu.linkonce.t.*)
-		*(.glue_7)
-		*(.glue_7t)
-		*(.got)
-		*(.gcc_except_table)
-		*(.gnu.linkonce.r.*)
-		_etext = ABSOLUTE(.);
-
-	} > FLASH
-
-	/*
-	 * Init functions (static constructors and the like)
-	 */
-	.init_section : {
-		_sinit = ABSOLUTE(.);
-		KEEP(*(.init_array .init_array.*))
-		_einit = ABSOLUTE(.);
-	} > FLASH
-
-
-	.ARM.extab : {
-		*(.ARM.extab*)
-	} > FLASH
-
-	__exidx_start = ABSOLUTE(.);
-	.ARM.exidx : {
-		*(.ARM.exidx*)
-	} > FLASH
-	__exidx_end = ABSOLUTE(.);
-
-	_eronly = ABSOLUTE(.);
-
-	.data : {
-		_sdata = ABSOLUTE(.);
-		*(.data .data.*)
-		*(.gnu.linkonce.d.*)
-		CONSTRUCTORS
-		_edata = ABSOLUTE(.);
-
-		/* Pad out last section as the STM32H7 Flash write size is 256 bits. 32 bytes */
-		. = ALIGN(16);
-		FILL(0xffff)
-		. += 16;
-	} > AXI_SRAM AT > FLASH  = 0xffff
-
-	.bss : {
-		_sbss = ABSOLUTE(.);
-		*(.bss .bss.*)
-		*(.gnu.linkonce.b.*)
-		*(COMMON)
-		. = ALIGN(4);
-		_ebss = ABSOLUTE(.);
-	} > AXI_SRAM
-
-	/* Emit the the D3 power domain section for locating BDMA data */
-
-	.sram4_reserve (NOLOAD) :
-	{
-		*(.sram4)
-		. = ALIGN(4);
-		_sram4_heap_start = ABSOLUTE(.);
-	} > SRAM4
-
-	/* Stabs debugging sections. */
-	.stab 0 : { *(.stab) }
-	.stabstr 0 : { *(.stabstr) }
-	.stab.excl 0 : { *(.stab.excl) }
-	.stab.exclstr 0 : { *(.stab.exclstr) }
-	.stab.index 0 : { *(.stab.index) }
-	.stab.indexstr 0 : { *(.stab.indexstr) }
-	.comment 0 : { *(.comment) }
-	.debug_abbrev 0 : { *(.debug_abbrev) }
-	.debug_info 0 : { *(.debug_info) }
-	.debug_line 0 : { *(.debug_line) }
-	.debug_pubnames 0 : { *(.debug_pubnames) }
-	.debug_aranges 0 : { *(.debug_aranges) }
-}

boards/auterion/fmu-v6s/performance-test.px4board

@@ -1,29 +0,0 @@
-CONFIG_BOARD_TOOLCHAIN="arm-none-eabi"
-CONFIG_BOARD_ARCHITECTURE="cortex-m7"
-CONFIG_BOARD_ETHERNET=y
-CONFIG_BOARD_SERIAL_GPS1="/dev/ttyS5"
-CONFIG_BOARD_SERIAL_TEL1="/dev/ttyS0"
-CONFIG_BOARD_SERIAL_TEL2="/dev/ttyS1"
-CONFIG_BOARD_SERIAL_TEL3="/dev/ttyS2"
-CONFIG_BOARD_ROMFSROOT="performance-test"
-CONFIG_DRIVERS_ADC_BOARD_ADC=y
-CONFIG_SYSTEMCMDS_DMESG=y
-CONFIG_SYSTEMCMDS_GPIO=y
-CONFIG_SYSTEMCMDS_HARDFAULT_LOG=y
-CONFIG_SYSTEMCMDS_I2CDETECT=y
-CONFIG_SYSTEMCMDS_LED_CONTROL=y
-CONFIG_SYSTEMCMDS_MFT=y
-CONFIG_SYSTEMCMDS_MTD=y
-CONFIG_SYSTEMCMDS_MFT_CFG=y
-CONFIG_SYSTEMCMDS_PARAM=y
-CONFIG_SYSTEMCMDS_PERF=y
-CONFIG_SYSTEMCMDS_REBOOT=y
-CONFIG_SYSTEMCMDS_SD_BENCH=y
-CONFIG_SYSTEMCMDS_SD_STRESS=y
-CONFIG_SYSTEMCMDS_SERIAL_TEST=y
-CONFIG_SYSTEMCMDS_SYSTEM_TIME=y
-CONFIG_SYSTEMCMDS_TOP=y
-CONFIG_SYSTEMCMDS_TOPIC_LISTENER=y
-CONFIG_SYSTEMCMDS_UORB=y
-CONFIG_SYSTEMCMDS_VER=y
-CONFIG_SYSTEMCMDS_WORK_QUEUE=y

boards/auterion/fmu-v6s/rover.px4board

@@ -1,16 +0,0 @@
-CONFIG_MODULES_AIRSPEED_SELECTOR=n
-CONFIG_MODULES_FLIGHT_MODE_MANAGER=n
-CONFIG_MODULES_FW_ATT_CONTROL=n
-CONFIG_MODULES_FW_AUTOTUNE_ATTITUDE_CONTROL=n
-CONFIG_MODULES_FW_POS_CONTROL=n
-CONFIG_MODULES_FW_RATE_CONTROL=n
-CONFIG_MODULES_LANDING_TARGET_ESTIMATOR=n
-CONFIG_MODULES_MC_ATT_CONTROL=n
-CONFIG_MODULES_MC_AUTOTUNE_ATTITUDE_CONTROL=n
-CONFIG_MODULES_MC_HOVER_THRUST_ESTIMATOR=n
-CONFIG_MODULES_MC_POS_CONTROL=n
-CONFIG_MODULES_MC_RATE_CONTROL=n
-CONFIG_MODULES_VTOL_ATT_CONTROL=n
-CONFIG_EKF2_AUX_GLOBAL_POSITION=y
-# CONFIG_EKF2_WIND is not set
-CONFIG_MODULES_DIFFERENTIAL_DRIVE=y

boards/auterion/fmu-v6s/src/CMakeLists.txt

@@ -1,72 +0,0 @@
-############################################################################
-#
-#   Copyright (c) 2016 PX4 Development Team. All rights reserved.
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions
-# are met:
-#
-# 1. Redistributions of source code must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-# 2. Redistributions in binary form must reproduce the above copyright
-#    notice, this list of conditions and the following disclaimer in
-#    the documentation and/or other materials provided with the
-#    distribution.
-# 3. Neither the name PX4 nor the names of its contributors may be
-#    used to endorse or promote products derived from this software
-#    without specific prior written permission.
-#
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
-# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
-# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
-# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
-# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
-# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
-# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
-# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-# POSSIBILITY OF SUCH DAMAGE.
-#
-############################################################################
-if("${PX4_BOARD_LABEL}" STREQUAL  "bootloader")
-	add_compile_definitions(BOOTLOADER)
-	add_library(drivers_board
-		bootloader_main.c
-		init.c
-		timer_config.cpp
-	)
-	target_link_libraries(drivers_board
-		PRIVATE
-			nuttx_arch # sdio
-			nuttx_drivers # sdio
-			px4_layer #gpio
-			arch_io_pins # iotimer
-			bootloader
-	)
-	target_include_directories(drivers_board PRIVATE ${PX4_SOURCE_DIR}/platforms/nuttx/src/bootloader/common)
-
-else()
-	add_library(drivers_board
-		can.c
-		i2c.cpp
-		init.c
-		led.c
-		mtd.cpp
-		spi.cpp
-		timer_config.cpp
-	)
-	add_dependencies(drivers_board arch_board_hw_info)
-
-	target_link_libraries(drivers_board
-		PRIVATE
-			arch_io_pins
-			arch_spi
-			arch_board_hw_info
-			drivers__led # drv_led_start
-			nuttx_arch # sdio
-			nuttx_drivers # sdio
-			px4_layer
-	)
-endif()

boards/auterion/fmu-v6s/src/board_config.h

@@ -1,209 +0,0 @@
-/****************************************************************************
- *
- *   Copyright (c) 2016-2022 PX4 Development Team. All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- * 3. Neither the name PX4 nor the names of its contributors may be
- *    used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ****************************************************************************/
-
-/**
- * @file board_config.h
- *
- * Auterion FMU-v6s internal definitions
- */
-
-#pragma once
-
-/****************************************************************************************************
- * Included Files
- ****************************************************************************************************/
-
-#include <px4_platform_common/px4_config.h>
-#include <nuttx/compiler.h>
-#include <stdint.h>
-
-
-#include <stm32_gpio.h>
-
-/****************************************************************************************************
- * Definitions
- ****************************************************************************************************/
-
-/* Configuration ************************************************************************************/
-
-/* FIXME: remove with BOARD_HAS_SIMPLE_HW_VERSIONING */
-#define BOARD_HAS_HW_SPLIT_VERSIONING
-#define BOARD_HAS_ONLY_EEPROM_VERSIONING
-
-#define HW_INFO_INIT_PREFIX    "V6S"
-
-
-/* Auterion FMU GPIOs ***********************************************************************************/
-/* LEDs are driven with push pull */
-#define GPIO_nLED_RED        /* PB14 */  (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_50MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTB|GPIO_PIN14)
-#define GPIO_nLED_BLUE       /* PC13 */  (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_50MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTC|GPIO_PIN13)
-#define GPIO_nLED_GREEN      /* PE3  */  (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_50MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTE|GPIO_PIN3)
-
-#define BOARD_HAS_CONTROL_STATUS_LEDS 1
-#define BOARD_OVERLOAD_LED     LED_RED
-#define BOARD_ARMED_STATE_LED  LED_BLUE
-
-
-/* SPI */
-#define BOARD_NUM_SPI_CFG_HW_VERSIONS 1
-
-
-/* I2C busses
- * Devices on the onboard buses.
- *
- * Note that these are unshifted addresses.
- */
-#define BOARD_MTD_NUM_EEPROM 1 /* MTD: imu_eeprom */
-#define PX4_I2C_BUS_MTD      4
-
-
-/* CAN */
-#define UAVCAN_NUM_IFACES_RUNTIME  1
-
-
-/*
- * ADC channels
- *
- * These are the channel numbers of the ADCs of the microcontroller that
- * can be used by the Px4 Firmware in the adc driver
- */
-#define ADC1_CH(n)                  (n)
-#define SYSTEM_ADC_BASE STM32_ADC1_BASE
-
-/* Define GPIO pins used as ADC N.B. Channel numbers must match below  */
-/* PC3_C connected to PC3 internally, which connects to GPIO_ADC12_INP13 */
-
-#define PX4_ADC_GPIO \
-	/* PB1 */ GPIO_ADC12_INP5, \
-	/* PC0 */ GPIO_ADC123_INP10, \
-	/* PC3 */ GPIO_ADC12_INP13, \
-	/* PA3 */ GPIO_ADC12_INP15, \
-	/* PA0 */ GPIO_ADC1_INP16, \
-	/* PA4 */ GPIO_ADC12_INP18
-
-/* Define Channel numbers must match above GPIO pin IN(n)
- * Note: These channel names are special, see board_common.h */
-#define ADC_BATTERY_CURRENT_CHANNEL             /* PB1 = 0 */  ADC1_CH(5)
-#define ADC_SCALED_V5_EXTERNAL_CHANNEL          /* PC0 = 1 */  ADC1_CH(10)
-#define ADC_BATTERY_VOLTAGE_CHANNEL             /* PC3 = 2 */  ADC1_CH(13)
-#define ADC_SCALED_V5_CHANNEL                   /* PA3 = 3 */  ADC1_CH(15)
-#define ADC_EXTRAS_CHANNEL                      /* PA0 = 4 */  ADC1_CH(16)
-#define ADC_SCALED_VDD_3V3_SENSORS1_CHANNEL     /* PA4 = 5 */  ADC1_CH(18)
-
-#define ADC_CHANNELS \
-	((1 << ADC_EXTRAS_CHANNEL) | \
-	 (1 << ADC_SCALED_V5_EXTERNAL_CHANNEL) | \
-	 (1 << ADC_SCALED_V5_CHANNEL) | \
-	 (1 << ADC_BATTERY_VOLTAGE_CHANNEL) | \
-	 (1 << ADC_BATTERY_CURRENT_CHANNEL) | \
-	 (1 << ADC_SCALED_VDD_3V3_SENSORS1_CHANNEL))
-
-// Definitions for drivers/adc/board_adc
-#define BOARD_ADC_USB_CONNECTED 0
-// a hack to also measure the external 5V rail
-#define ADC_SCALED_VDD_3V3_SENSORS2_CHANNEL ADC_SCALED_V5_EXTERNAL_CHANNEL
-
-
-/* PWM Timers */
-#define BOARD_NUM_IO_TIMERS 2
-#define DIRECT_PWM_OUTPUT_CHANNELS   8
-
-/* High-resolution timer */
-#define HRT_TIMER               8  /* use timer8 for the HRT */
-#define HRT_TIMER_CHANNEL       3  /* use capture/compare channel 3 */
-
-#define HRT_PPM_CHANNEL         /* T8C2 */  2  /* use capture/compare channel 1 */
-#define GPIO_PPM_IN             /* PC7  */ GPIO_TIM8_CH2IN_1
-
-/* RC Serial port (input only) */
-#define RC_SERIAL_PORT          "/dev/ttyS4"
-
-/* This board provides a DMA pool and APIs */
-#define BOARD_DMA_ALLOC_POOL_SIZE 5120
-
-/* This board provides the board_on_reset interface */
-#define BOARD_HAS_ON_RESET 1
-
-/* PD4 is ARMED
- * The GPIO will be set as input while not armed with internal pull DOWN.
- * While armed it shall be configured at a GPIO OUT set HIGH
- */
-#define GPIO_ARMED_INIT  (GPIO_INPUT|GPIO_PULLDOWN|GPIO_PORTD|GPIO_PIN4)
-#define GPIO_ARMED       (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_SET|GPIO_PORTD|GPIO_PIN4)
-#define BOARD_INDICATE_EXTERNAL_LOCKOUT_STATE(enabled)  px4_arch_configgpio((enabled) ? GPIO_ARMED : GPIO_ARMED_INIT)
-#define BOARD_GET_EXTERNAL_LOCKOUT_STATE() px4_arch_gpioread(GPIO_ARMED)
-
-/* All pins to initialize on boot */
-#define PX4_GPIO_INIT_LIST { \
-		GPIO_ARMED_INIT, \
-		PX4_ADC_GPIO,    \
-		GPIO_CAN1_TX,    \
-		GPIO_CAN1_RX,    \
-	}
-
-/* Enable the buffer for the dmesg command */
-#define BOARD_ENABLE_CONSOLE_BUFFER
-
-__BEGIN_DECLS
-
-/****************************************************************************************************
- * Public Types
- ****************************************************************************************************/
-
-/****************************************************************************************************
- * Public data
- ****************************************************************************************************/
-
-#ifndef __ASSEMBLY__
-
-/****************************************************************************************************
- * Public Functions
- ****************************************************************************************************/
-
-/****************************************************************************************************
- * Name: stm32_spiinitialize
- *
- * Description:
- *   Called to configure SPI chip select GPIO pins for the Auterion FMU board.
- *
- ****************************************************************************************************/
-
-extern void stm32_spiinitialize(void);
-
-extern void board_peripheral_reset(int ms);
-
-#include <px4_platform_common/board_common.h>
-
-#endif /* __ASSEMBLY__ */
-
-__END_DECLS

boards/auterion/fmu-v6s/src/bootloader_main.c

@@ -1,59 +0,0 @@
-/****************************************************************************
- *
- *   Copyright (c) 2019-2021 PX4 Development Team. All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- * 3. Neither the name PX4 nor the names of its contributors may be
- *    used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ****************************************************************************/
-
-/**
- * @file bootloader_main.c
- *
- * FMU-specific early startup code for bootloader
-*/
-
-#include "board_config.h"
-#include "bl.h"
-
-#include <nuttx/config.h>
-#include <nuttx/board.h>
-#include <chip.h>
-#include <stm32_uart.h>
-#include <arch/board/board.h>
-#include "arm_internal.h"
-#include <px4_platform_common/init.h>
-
-void board_late_initialize(void)
-{
-}
-
-extern void sys_tick_handler(void);
-void board_timerhook(void)
-{
-	sys_tick_handler();
-}

boards/auterion/fmu-v6s/src/can.c

@@ -1,136 +0,0 @@
-/****************************************************************************
- *
- *   Copyright (C) 2012 PX4 Development Team. All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- * 3. Neither the name PX4 nor the names of its contributors may be
- *    used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ****************************************************************************/
-
-/**
- * @file px4fmu_can.c
- *
- * Board-specific CAN functions.
- */
-
-#if !defined(CONFIG_CAN)
-
-#include <stdint.h>
-
-#include "board_config.h"
-
-
-__EXPORT
-uint16_t board_get_can_interfaces(void)
-{
-	return 0b01;
-}
-
-#else
-
-#include <errno.h>
-#include <debug.h>
-
-#include <nuttx/can/can.h>
-#include <arch/board/board.h>
-
-#include "chip.h"
-#include "arm_internal.h"
-
-#include "chip.h"
-#include "stm32_can.h"
-#include "board_config.h"
-
-/************************************************************************************
- * Pre-processor Definitions
- ************************************************************************************/
-/* Configuration ********************************************************************/
-
-#if defined(CONFIG_STM32_CAN1) && defined(CONFIG_STM32_CAN2)
-#  warning "Both CAN1 and CAN2 are enabled.  Assuming only CAN1."
-#  undef CONFIG_STM32_CAN2
-#endif
-
-#ifdef CONFIG_STM32_CAN1
-#  define CAN_PORT 1
-#else
-#  define CAN_PORT 2
-#endif
-
-/************************************************************************************
- * Private Functions
- ************************************************************************************/
-
-/************************************************************************************
- * Public Functions
- ************************************************************************************/
-int can_devinit(void);
-
-/************************************************************************************
- * Name: can_devinit
- *
- * Description:
- *   All STM32 architectures must provide the following interface to work with
- *   examples/can.
- *
- ************************************************************************************/
-
-int can_devinit(void)
-{
-	static bool initialized = false;
-	struct can_dev_s *can;
-	int ret;
-
-	/* Check if we have already initialized */
-
-	if (!initialized) {
-		/* Call stm32_caninitialize() to get an instance of the CAN interface */
-
-		can = stm32_caninitialize(CAN_PORT);
-
-		if (can == NULL) {
-			canerr("ERROR:  Failed to get CAN interface\n");
-			return -ENODEV;
-		}
-
-		/* Register the CAN driver at "/dev/can0" */
-
-		ret = can_register("/dev/can0", can);
-
-		if (ret < 0) {
-			canerr("ERROR: can_register failed: %d\n", ret);
-			return ret;
-		}
-
-		/* Now we are initialized */
-
-		initialized = true;
-	}
-
-	return OK;
-}
-#endif /* CONFIG_CAN */

boards/auterion/fmu-v6s/src/hw_config.h

@@ -1,126 +0,0 @@
-/*
- * hw_config.h
- *
- *  Created on: May 17, 2015
- *      Author: david_s5
- */
-
-#ifndef HW_CONFIG_H_
-#define HW_CONFIG_H_
-
-/****************************************************************************
- * 10-8--2016:
- *  To simplify the ripple effect on the tools, we will be using
- *  /dev/serial/by-id/<asterisk>PX4<asterisk> to locate PX4 devices. Therefore
- *  moving forward all Bootloaders must contain the prefix "PX4 BL "
- *  in the USBDEVICESTRING
- *  This Change will be made in an upcoming BL release
- ****************************************************************************/
-/*
- * Define usage to configure a bootloader
- *
- *
- * Constant                example          Usage
- * APP_LOAD_ADDRESS     0x08004000            - The address in Linker Script, where the app fw is org-ed
- * BOOTLOADER_DELAY     5000                  - Ms to wait while under USB pwr or bootloader request
- * BOARD_FMUV2
- * INTERFACE_USB        1                     - (Optional) Scan and use the USB interface for bootloading
- * INTERFACE_USART      1                     - (Optional) Scan and use the Serial interface for bootloading
- * USBDEVICESTRING      "PX4 BL FMU v2.x"     - USB id string
- * USBPRODUCTID         0x0011                - PID Should match defconfig
- * BOOT_DELAY_ADDRESS   0x000001a0            - (Optional) From the linker script from Linker Script to get a custom
- *                                               delay provided by an APP FW
- * BOARD_TYPE           9                     - Must match .prototype boad_id
- * _FLASH_KBYTES        (*(uint16_t *)0x1fff7a22) - Run time flash size detection
- * BOARD_FLASH_SECTORS  ((_FLASH_KBYTES == 0x400) ? 11 : 23) - Run time determine the physical last sector
- * BOARD_FLASH_SECTORS   11                   - Hard coded zero based last sector
- * BOARD_FLASH_SIZE     (_FLASH_KBYTES*1024)-   Total Flash size of device, determined at run time.
- *                         (1024 * 1024)      - Hard coded Total Flash of device - The bootloader and app reserved will be deducted
- *                                              programmatically
- *
- * BOARD_FIRST_FLASH_SECTOR_TO_ERASE  2        - Optional sectors index in the flash_sectors table  (F4 only), to begin erasing.
- *                                               This is to allow sectors to be reserved for app fw usage. That will NOT be erased
- *                                               during a FW upgrade.
- *                                               The default is 0, and selects the first sector to be erased, as the 0th entry in the
- *                                               flash_sectors table. Which is the second physical sector of FLASH in the device.
- *                                               The first physical sector of FLASH is used by the bootloader, and is not defined
- *                                               in the table.
- *
- * APP_RESERVATION_SIZE (BOARD_FIRST_FLASH_SECTOR_TO_ERASE * 16 * 1024) - Number of bytes reserved by the APP FW. This number plus
- *                                                                        BOOTLOADER_RESERVATION_SIZE  will be deducted from
- *                                                                        BOARD_FLASH_SIZE to determine the size of the App FW
- *                                                                        and hence the address space of FLASH to erase and program.
- * USBMFGSTRING            "PX4 AP"            - Optional USB MFG string (default is '3D Robotics' if not defined.)
- * SERIAL_BREAK_DETECT_DISABLED                -  Optional prevent break selection on Serial port from entering or staying in BL
- *
- * * Other defines are somewhat self explanatory.
- */
-
-/* Boot device selection list*/
-#define SERIAL0_DEV    0x01
-
-#define APP_LOAD_ADDRESS               0x08020000
-#define BOOTLOADER_DELAY               5000
-#define INTERFACE_USB                  0
-#define INTERFACE_USART                1
-#define INTERFACE_USART_CONFIG         "/dev/ttyS0,1500000"
-#define BOOT_DELAY_ADDRESS             0x000001a0
-#define BOARD_TYPE                     60
-#define _FLASH_KBYTES                  (*(uint32_t *)0x1FF1E880)
-#define BOARD_FLASH_SECTORS            (15)
-#define BOARD_FLASH_SIZE               (_FLASH_KBYTES * 1024)
-
-#define OSC_FREQ                       24
-
-#define BOARD_PIN_LED_ACTIVITY         GPIO_nLED_BLUE  // BLUE
-#define BOARD_PIN_LED_BOOTLOADER       GPIO_nLED_GREEN // GREEN
-#define BOARD_LED_ON                   1
-#define BOARD_LED_OFF                  0
-
-#define SERIAL_BREAK_DETECT_DISABLED   1
-
-// Connected to SAI3_RXC on i.MX8MP side, has a pulldown by default
-#define BOARD_FORCE_BL_PIN             (GPIO_INPUT|GPIO_PULLDOWN|GPIO_PORTD|GPIO_PIN3)
-#define BOARD_FORCE_BL_STATE           1
-
-/*
- * Uncommenting this allows to force the bootloader through
- * a PWM output pin. As this can accidentally initialize
- * an ESC prematurely, it is not recommended. This feature
- * has not been used and hence defaults now to off.
- *
- * # define BOARD_FORCE_BL_PIN_OUT         (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_SET|GPIO_PORTE|GPIO_PIN14)
- * # define BOARD_FORCE_BL_PIN_IN          (GPIO_INPUT|GPIO_PULLUP|GPIO_PORTE|GPIO_PIN11)
- *
- * # define BOARD_POWER_PIN_OUT           (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_SET|GPIO_PORTA|GPIO_PIN4)
- * # define BOARD_POWER_ON                 1
- * # define BOARD_POWER_OFF                0
- * # undef  BOARD_POWER_PIN_RELEASE        // Leave pin enabling Power - un comment to release (disable power)
- *
-*/
-
-#if !defined(ARCH_SN_MAX_LENGTH)
-# define ARCH_SN_MAX_LENGTH 12
-#endif
-
-#if !defined(APP_RESERVATION_SIZE)
-#  define APP_RESERVATION_SIZE 0
-#endif
-
-#if !defined(BOARD_FIRST_FLASH_SECTOR_TO_ERASE)
-#  define BOARD_FIRST_FLASH_SECTOR_TO_ERASE 1
-#endif
-
-#if !defined(USB_DATA_ALIGN)
-# define USB_DATA_ALIGN
-#endif
-
-#ifndef BOOT_DEVICES_SELECTION
-#  define BOOT_DEVICES_SELECTION SERIAL0_DEV
-#endif
-
-#ifndef BOOT_DEVICES_FILTER_ONUSB
-#  define BOOT_DEVICES_FILTER_ONUSB SERIAL0_DEV
-#endif
-
-#endif /* HW_CONFIG_H_ */

boards/auterion/fmu-v6s/src/i2c.cpp

@@ -1,39 +0,0 @@
-/****************************************************************************
- *
- *   Copyright (C) 2020 PX4 Development Team. All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- * 3. Neither the name PX4 nor the names of its contributors may be
- *    used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ****************************************************************************/
-
-#include <px4_arch/i2c_hw_description.h>
-
-constexpr px4_i2c_bus_t px4_i2c_buses[I2C_BUS_MAX_BUS_ITEMS] = {
-	initI2CBusExternal(1),
-	initI2CBusInternal(4),
-};

boards/auterion/fmu-v6s/src/init.c

@@ -1,244 +0,0 @@
-/****************************************************************************
- *
- *   Copyright (c) 2012-2022 PX4 Development Team. All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- * 3. Neither the name PX4 nor the names of its contributors may be
- *    used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ****************************************************************************/
-
-/**
- * @file init.c
- *
- * Auterion FMU-specific early startup code.  This file implements the
- * board_app_initialize() function that is called early by nsh during startup.
- *
- * Code here is run before the rcS script is invoked; it should start required
- * subsystems and perform board-specific initialization.
- */
-
-/****************************************************************************
- * Included Files
- ****************************************************************************/
-
-#include "board_config.h"
-
-#include <stdbool.h>
-#include <stdio.h>
-#include <string.h>
-#include <debug.h>
-#include <errno.h>
-
-#include <nuttx/config.h>
-#include <nuttx/board.h>
-#include <nuttx/spi/spi.h>
-#include <nuttx/sdio.h>
-#include <nuttx/mmcsd.h>
-#include <nuttx/analog/adc.h>
-#include <nuttx/mm/gran.h>
-#include <chip.h>
-#include <stm32_uart.h>
-#include <arch/board/board.h>
-#include "arm_internal.h"
-
-#include <drivers/drv_hrt.h>
-#include <drivers/drv_board_led.h>
-#include <systemlib/px4_macros.h>
-#include <px4_arch/io_timer.h>
-#include <px4_platform_common/init.h>
-#include <px4_platform_common/px4_manifest.h>
-#include <px4_platform/gpio.h>
-#include <px4_platform/board_determine_hw_info.h>
-#include <px4_platform/board_dma_alloc.h>
-
-/****************************************************************************
- * Pre-Processor Definitions
- ****************************************************************************/
-
-/* Configuration ************************************************************/
-
-/*
- * Ideally we'd be able to get these from arm_internal.h,
- * but since we want to be able to disable the NuttX use
- * of leds for system indication at will and there is no
- * separate switch, we need to build independent of the
- * CONFIG_ARCH_LEDS configuration switch.
- */
-__BEGIN_DECLS
-extern void led_init(void);
-extern void led_on(int led);
-extern void led_off(int led);
-__END_DECLS
-
-
-/************************************************************************************
- * Name: board_peripheral_reset
- *
- * Description:
- *
- ************************************************************************************/
-__EXPORT void board_peripheral_reset(int ms)
-{
-	usleep(ms * 1000);
-	syslog(LOG_DEBUG, "reset done, %d ms\n", ms);
-}
-
-/************************************************************************************
- * Name: board_on_reset
- *
- * Description:
- * Optionally provided function called on entry to board_system_reset
- * It should perform any house keeping prior to the rest.
- *
- * status - 1 if resetting to boot loader
- *          0 if just resetting
- *
- ************************************************************************************/
-__EXPORT void board_on_reset(int status)
-{
-	for (int i = 0; i < DIRECT_PWM_OUTPUT_CHANNELS; ++i) {
-		px4_arch_configgpio(io_timer_channel_get_gpio_output(i));
-	}
-
-	if (status >= 0) {
-		up_mdelay(6);
-	}
-}
-
-/************************************************************************************
- * Name: stm32_boardinitialize
- *
- * Description:
- *   All STM32 architectures must provide the following entry point.  This entry point
- *   is called early in the initialization -- after all memory has been configured
- *   and mapped but before any devices have been initialized.
- *
- ************************************************************************************/
-
-__EXPORT void
-stm32_boardinitialize(void)
-{
-	board_on_reset(-1); /* Reset PWM first thing */
-
-	/* configure LEDs */
-
-	board_autoled_initialize();
-
-	/* configure Ethernet Reference Clock */
-	/* PLLQ1 is 100MHz, we need 50MHz on MCO1 => /2 */
-	/* stm32_mco1config(RCC_CFGR_MCO1_PLL1Q, RCC_CFGR_MCO1PRE(2)); */
-
-	/* configure pins */
-
-	const uint32_t gpio[] = PX4_GPIO_INIT_LIST;
-	px4_gpio_init(gpio, arraySize(gpio));
-}
-
-/****************************************************************************
- * Name: board_app_initialize
- *
- * Description:
- *   Perform application specific initialization.  This function is never
- *   called directly from application code, but only indirectly via the
- *   (non-standard) boardctl() interface using the command BOARDIOC_INIT.
- *
- * Input Parameters:
- *   arg - The boardctl() argument is passed to the board_app_initialize()
- *         implementation without modification.  The argument has no
- *         meaning to NuttX; the meaning of the argument is a contract
- *         between the board-specific initalization logic and the the
- *         matching application logic.  The value cold be such things as a
- *         mode enumeration value, a set of DIP switch switch settings, a
- *         pointer to configuration data read from a file or serial FLASH,
- *         or whatever you would like to do with it.  Every implementation
- *         should accept zero/NULL as a default configuration.
- *
- * Returned Value:
- *   Zero (OK) is returned on success; a negated errno value is returned on
- *   any failure to indicate the nature of the failure.
- *
- ****************************************************************************/
-
-__EXPORT int board_app_initialize(uintptr_t arg)
-{
-#if !defined(BOOTLOADER)
-	/* Need hrt running before using the ADC */
-
-	px4_platform_init();
-
-	// Use the default HW_VER_REV(0x0,0x0) for Ramtron
-
-	stm32_spiinitialize();
-
-	/* Configure the HW based on the manifest */
-
-	px4_platform_configure();
-
-	if (OK == board_determine_hw_info()) {
-		syslog(LOG_INFO, "[boot] Rev 0x%1x : Ver 0x%1x %s\n", board_get_hw_revision(), board_get_hw_version(),
-		       board_get_hw_type_name());
-
-	} else {
-		syslog(LOG_ERR, "[boot] Failed to read HW revision and version\n");
-	}
-
-	/* Configure the Actual SPI interfaces (after we determined the HW version)  */
-
-	stm32_spiinitialize();
-
-	board_spi_reset(10, 0xffff);
-
-	/* Configure the DMA allocator */
-
-	if (board_dma_alloc_init() < 0) {
-		syslog(LOG_ERR, "[boot] DMA alloc FAILED\n");
-	}
-
-#  if defined(SERIAL_HAVE_RXDMA)
-	// set up the serial DMA polling at 1ms intervals for received bytes that have not triggered a DMA event.
-	static struct hrt_call serial_dma_call;
-	hrt_call_every(&serial_dma_call, 1000, 1000, (hrt_callout)stm32_serial_dma_poll, NULL);
-#  endif
-
-	/* initial LED state */
-	drv_led_start();
-	led_off(LED_RED);
-	led_on(LED_GREEN); // Indicate Power.
-	led_off(LED_BLUE);
-
-	if (board_hardfault_init(2, true) != 0) {
-		led_on(LED_RED);
-	}
-
-	if (nx_mount("/dev/mtdblock0", "/fs/microsd", "littlefs", 0, "autoformat") != 0) {
-		led_on(LED_RED);
-	}
-
-#endif /* !defined(BOOTLOADER) */
-
-	return OK;
-}

boards/auterion/fmu-v6s/src/led.c

@@ -1,235 +0,0 @@
-/****************************************************************************
- *
- *   Copyright (c) 2013 PX4 Development Team. All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- * 3. Neither the name PX4 nor the names of its contributors may be
- *    used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ****************************************************************************/
-
-/**
- * @file led.c
- *
- * PX4FMU LED backend.
- */
-
-#include <px4_platform_common/px4_config.h>
-
-#include <stdbool.h>
-
-#include "chip.h"
-#include "stm32_gpio.h"
-#include "board_config.h"
-
-#include <nuttx/board.h>
-#include <arch/board/board.h>
-
-/*
- * Ideally we'd be able to get these from arm_internal.h,
- * but since we want to be able to disable the NuttX use
- * of leds for system indication at will and there is no
- * separate switch, we need to build independent of the
- * CONFIG_ARCH_LEDS configuration switch.
- */
-__BEGIN_DECLS
-extern void led_init(void);
-extern void led_on(int led);
-extern void led_off(int led);
-extern void led_toggle(int led);
-__END_DECLS
-
-#ifdef CONFIG_ARCH_LEDS
-static bool nuttx_owns_leds = true;
-//                                B  R  S  G
-//                                0  1  2  3
-static const uint8_t xlatpx4[] = {1, 2, 4, 0};
-#  define xlat(p) xlatpx4[(p)]
-static uint32_t g_ledmap[] = {
-	GPIO_nLED_GREEN,   // Indexed by BOARD_LED_GREEN
-	GPIO_nLED_BLUE,    // Indexed by BOARD_LED_BLUE
-	GPIO_nLED_RED,     // Indexed by BOARD_LED_RED
-	GPIO_nSAFETY_SWITCH_LED_OUT,  // Indexed by LED_SAFETY by xlatpx4
-};
-
-#else
-
-#  define xlat(p) (p)
-static uint32_t g_ledmap[] = {
-	GPIO_nLED_BLUE,                     // Indexed by LED_BLUE
-	GPIO_nLED_RED,                      // Indexed by LED_RED, LED_AMBER
-	0,                                  // Indexed by LED_SAFETY (defaulted to an input)
-	GPIO_nLED_GREEN,                    // Indexed by LED_GREEN
-};
-
-#endif
-
-__EXPORT void led_init(void)
-{
-	for (size_t l = 0; l < (sizeof(g_ledmap) / sizeof(g_ledmap[0])); l++) {
-		if (g_ledmap[l] != 0) {
-			stm32_configgpio(g_ledmap[l]);
-		}
-	}
-}
-
-static void phy_set_led(int led, bool state)
-{
-	/* Drive High to switch on */
-
-	if (g_ledmap[led] != 0) {
-		stm32_gpiowrite(g_ledmap[led], state);
-	}
-}
-
-static bool phy_get_led(int led)
-{
-	/* If High it is on */
-	if (g_ledmap[led] != 0) {
-		return stm32_gpioread(g_ledmap[led]);
-	}
-
-	return false;
-}
-
-__EXPORT void led_on(int led)
-{
-	phy_set_led(xlat(led), true);
-}
-
-__EXPORT void led_off(int led)
-{
-	phy_set_led(xlat(led), false);
-}
-
-__EXPORT void led_toggle(int led)
-{
-	phy_set_led(xlat(led), !phy_get_led(xlat(led)));
-}
-
-#ifdef CONFIG_ARCH_LEDS
-/****************************************************************************
- * Public Functions
- ****************************************************************************/
-
-/****************************************************************************
- * Name: board_autoled_initialize
- ****************************************************************************/
-
-void board_autoled_initialize(void)
-{
-	led_init();
-}
-
-/****************************************************************************
- * Name: board_autoled_on
- ****************************************************************************/
-
-void board_autoled_on(int led)
-{
-	if (!nuttx_owns_leds) {
-		return;
-	}
-
-	switch (led) {
-	default:
-		break;
-
-	case LED_HEAPALLOCATE:
-		phy_set_led(BOARD_LED_BLUE, true);
-		break;
-
-	case LED_IRQSENABLED:
-		phy_set_led(BOARD_LED_BLUE, false);
-		phy_set_led(BOARD_LED_GREEN, true);
-		break;
-
-	case LED_STACKCREATED:
-		phy_set_led(BOARD_LED_GREEN, true);
-		phy_set_led(BOARD_LED_BLUE, true);
-		break;
-
-	case LED_INIRQ:
-		phy_set_led(BOARD_LED_BLUE, true);
-		break;
-
-	case LED_SIGNAL:
-		phy_set_led(BOARD_LED_GREEN, true);
-		break;
-
-	case LED_ASSERTION:
-		phy_set_led(BOARD_LED_RED, true);
-		phy_set_led(BOARD_LED_BLUE, true);
-		break;
-
-	case LED_PANIC:
-		phy_set_led(BOARD_LED_RED, true);
-		break;
-
-	case LED_IDLE : /* IDLE */
-		phy_set_led(BOARD_LED_RED, true);
-		break;
-	}
-}
-
-/****************************************************************************
- * Name: board_autoled_off
- ****************************************************************************/
-
-void board_autoled_off(int led)
-{
-	if (!nuttx_owns_leds) {
-		return;
-	}
-
-	switch (led) {
-	default:
-		break;
-
-	case LED_SIGNAL:
-		phy_set_led(BOARD_LED_GREEN, false);
-		break;
-
-	case LED_INIRQ:
-		phy_set_led(BOARD_LED_BLUE, false);
-		break;
-
-	case LED_ASSERTION:
-		phy_set_led(BOARD_LED_RED, false);
-		phy_set_led(BOARD_LED_BLUE, false);
-		break;
-
-	case LED_PANIC:
-		phy_set_led(BOARD_LED_RED, false);
-		break;
-
-	case LED_IDLE : /* IDLE */
-		phy_set_led(BOARD_LED_RED, false);
-		break;
-	}
-}
-
-#endif /* CONFIG_ARCH_LEDS */

boards/auterion/fmu-v6s/src/mtd.cpp

@@ -1,123 +0,0 @@
-/****************************************************************************
- *
- *   Copyright (C) 2020 PX4 Development Team. All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- * 3. Neither the name PX4 nor the names of its contributors may be
- *    used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ****************************************************************************/
-
-#include <nuttx/config.h>
-#include <board_config.h>
-
-#include <nuttx/spi/spi.h>
-#include <px4_platform_common/px4_manifest.h>
-
-static const px4_mft_device_t spi4 = {             // FM25V02A on FMUM native: 128K X 8, emulated as (1024 Blocks of 32)
-	.bus_type = px4_mft_device_t::SPI,
-	.devid    = SPIDEV_FLASH(0)
-};
-static const px4_mft_device_t i2c4 = {             // 24LC64T   8K 32 X 256
-	.bus_type =  px4_mft_device_t::I2C,
-	.devid    =  PX4_MK_I2C_DEVID(4, 0x50)
-};
-
-
-static const px4_mtd_entry_t fmum_fram = {
-	.device = &spi4,
-	.npart = 1,
-	.partd = {
-		{
-			.type = MTD_PARAMETERS,
-			.path = "/mnt/microsd",
-			.nblocks = (131072 / (1 << CONFIG_RAMTRON_EMULATE_SECTOR_SHIFT))
-		}
-	},
-};
-
-static const px4_mtd_entry_t fmum_eeprom = {
-	.device = &i2c4,
-	.npart = 5,
-	.partd = {
-		{
-			.type = MTD_CALDATA,
-			.path = "/fs/mtd_caldata",
-			.nblocks = 224
-		},
-		{
-			.type = MTD_MFT_VER,
-			.path = "/fs/mtd_mft_ver",
-			.nblocks = 8
-		},
-		{
-			.type = MTD_MFT_REV,
-			.path = "/fs/mtd_mft_rev",
-			.nblocks = 8
-		},
-		{
-			.type = MTD_ID,
-			.path = "/fs/mtd_id",
-			.nblocks = 8 // 256 = 32 * 8
-		},
-		{
-			.type = MTD_NET,
-			.path = "/fs/mtd_net",
-			.nblocks = 8 // 256 = 32 * 8
-		}
-	},
-};
-
-static const px4_mtd_manifest_t board_mtd_config = {
-	.nconfigs   = 2,
-	.entries = {
-		&fmum_fram,
-		&fmum_eeprom
-	}
-};
-
-static const px4_mft_entry_s mtd_mft = {
-	.type = MTD,
-	.pmft = (void *) &board_mtd_config,
-};
-
-static const px4_mft_entry_s mft_mft = {
-	.type = MFT,
-	.pmft = (void *) system_query_manifest,
-};
-
-static const px4_mft_s mft = {
-	.nmft = 2,
-	.mfts = {
-		&mtd_mft,
-		&mft_mft,
-	}
-};
-
-const px4_mft_s *board_get_manifest(void)
-{
-	return &mft;
-}

boards/auterion/fmu-v6s/src/spi.cpp

@@ -1,48 +0,0 @@
-/****************************************************************************
- *
- *   Copyright (C) 2020, 2022 PX4 Development Team. All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- * 3. Neither the name PX4 nor the names of its contributors may be
- *    used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ****************************************************************************/
-
-#include <px4_arch/spi_hw_description.h>
-#include <drivers/drv_sensor.h>
-#include <nuttx/spi/spi.h>
-
-constexpr px4_spi_bus_t px4_spi_buses[SPI_BUS_MAX_BUS_ITEMS] = {
-	initSPIBus(SPI::Bus::SPI3, {
-		initSPIDevice(DRV_GYR_DEVTYPE_BMI088, SPI::CS{GPIO::PortC, GPIO::Pin12}, SPI::DRDY{GPIO::PortD, GPIO::Pin14}),
-		initSPIDevice(DRV_ACC_DEVTYPE_BMI088, SPI::CS{GPIO::PortE, GPIO::Pin10}, SPI::DRDY{GPIO::PortD, GPIO::Pin10}),
-	}),
-	initSPIBus(SPI::Bus::SPI4, {
-		initSPIDevice(SPIDEV_FLASH(0), SPI::CS{GPIO::PortE, GPIO::Pin4})
-	}),
-};
-
-static constexpr bool unused = validateSPIConfig(px4_spi_buses);

boards/auterion/fmu-v6s/src/timer_config.cpp

@@ -1,66 +0,0 @@
-/****************************************************************************
- *
- *   Copyright (C) 2012 PX4 Development Team. All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- * 3. Neither the name PX4 nor the names of its contributors may be
- *    used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ****************************************************************************/
-
-#include <px4_arch/io_timer_hw_description.h>
-
-/* Timer allocation
- *
- * TIM1_CH1  T FMU_CH1
- * TIM1_CH2  T FMU_CH2
- * TIM1_CH3  T FMU_CH3
- * TIM1_CH4  T FMU_CH4
- *
- * TIM3_CH1  T FMU_CH5
- * TIM3_CH2  T FMU_CH6
- * TIM3_CH3  T FMU_CH7
- * TIM3_CH4  T FMU_CH8
- */
-
-constexpr io_timers_t io_timers[MAX_IO_TIMERS] = {
-	initIOTimer(Timer::Timer1, DMA{DMA::Index1}),
-	initIOTimer(Timer::Timer3, DMA{DMA::Index1}),
-};
-
-constexpr timer_io_channels_t timer_io_channels[MAX_TIMER_IO_CHANNELS] = {
-	initIOTimerChannel(io_timers, {Timer::Timer1, Timer::Channel1}, {GPIO::PortE, GPIO::Pin9}),
-	initIOTimerChannel(io_timers, {Timer::Timer1, Timer::Channel2}, {GPIO::PortE, GPIO::Pin11}),
-	initIOTimerChannel(io_timers, {Timer::Timer1, Timer::Channel3}, {GPIO::PortE, GPIO::Pin13}),
-	initIOTimerChannel(io_timers, {Timer::Timer1, Timer::Channel4}, {GPIO::PortE, GPIO::Pin14}),
-	initIOTimerChannel(io_timers, {Timer::Timer3, Timer::Channel1}, {GPIO::PortC, GPIO::Pin6}),
-	initIOTimerChannel(io_timers, {Timer::Timer3, Timer::Channel2}, {GPIO::PortB, GPIO::Pin5}),
-	initIOTimerChannel(io_timers, {Timer::Timer3, Timer::Channel3}, {GPIO::PortB, GPIO::Pin0}),
-	initIOTimerChannel(io_timers, {Timer::Timer3, Timer::Channel4}, {GPIO::PortC, GPIO::Pin9}),
-};
-
-constexpr io_timers_channel_mapping_t io_timers_channel_mapping =
-	initIOTimerChannelMapping(io_timers, timer_io_channels);

boards/auterion/fmu-v6s/zenoh.px4board

@@ -1,4 +0,0 @@
-# CONFIG_BOARD_UAVCAN_TIMER_OVERRIDE is not set
-CONFIG_DRIVERS_UAVCAN=n
-CONFIG_MODULES_UXRCE_DDS_CLIENT=n
-CONFIG_MODULES_ZENOH=y

boards/bitcraze/crazyflie/src/init.c

@@ -100,7 +100,7 @@ __END_DECLS
  *
  * Description:
  *   All STM32 architectures must provide the following entry point.  This entry point
- *   is called early in the initialization -- after all memory has been configured
+ *   is called early in the intitialization -- after all memory has been configured
  *   and mapped but before any devices have been initialized.
  *
  ************************************************************************************/

boards/bitcraze/crazyflie21/src/init.c

@@ -100,7 +100,7 @@ __END_DECLS
  *
  * Description:
  *   All STM32 architectures must provide the following entry point.  This entry point
- *   is called early in the initialization -- after all memory has been configured
+ *   is called early in the intitialization -- after all memory has been configured
  *   and mapped but before any devices have been initialized.
  *
  ************************************************************************************/

boards/bluerobotics/navigator/cmake/upload.cmake

@@ -1,53 +0,0 @@
-############################################################################
-#
-#   Copyright (c) 2020 PX4 Development Team. All rights reserved.
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions
-# are met:
-#
-# 1. Redistributions of source code must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-# 2. Redistributions in binary form must reproduce the above copyright
-#    notice, this list of conditions and the following disclaimer in
-#    the documentation and/or other materials provided with the
-#    distribution.
-# 3. Neither the name PX4 nor the names of its contributors may be
-#    used to endorse or promote products derived from this software
-#    without specific prior written permission.
-#
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
-# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
-# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
-# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
-# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
-# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
-# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
-# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-# POSSIBILITY OF SUCH DAMAGE.
-#
-############################################################################
-
-if(DEFINED ENV{AUTOPILOT_HOST})
-	set(AUTOPILOT_HOST $ENV{AUTOPILOT_HOST})
-else()
-	set(AUTOPILOT_HOST "raspberrypi")
-endif()
-
-if(DEFINED ENV{AUTOPILOT_USER})
-	set(AUTOPILOT_USER $ENV{AUTOPILOT_USER})
-else()
-	set(AUTOPILOT_USER "pi")
-endif()
-
-add_custom_target(upload
-	COMMAND rsync -arh --progress
-			${CMAKE_RUNTIME_OUTPUT_DIRECTORY} ${PX4_SOURCE_DIR}/posix-configs/rpi/navigator/*.config ${PX4_BINARY_DIR}/etc # source
-			"${AUTOPILOT_USER}@${AUTOPILOT_HOST}:/home/${AUTOPILOT_USER}/px4" # destination
-	DEPENDS px4
-	COMMENT "uploading px4"
-	USES_TERMINAL
-)

boards/bluerobotics/navigator/default.px4board

@@ -1,78 +0,0 @@
-CONFIG_PLATFORM_POSIX=y
-CONFIG_BOARD_LINUX_TARGET=y
-CONFIG_BOARD_TESTING=y
-CONFIG_BOARD_TOOLCHAIN="arm-linux-gnueabihf"
-CONFIG_BOARD_ARCHITECTURE="cortex-a53"
-CONFIG_DRIVERS_ADC_ADS1115=y
-CONFIG_DRIVERS_BATT_SMBUS=y
-CONFIG_DRIVERS_CAMERA_TRIGGER=y
-CONFIG_DRIVERS_LIGHTS_NEOPIXEL=y
-CONFIG_DRIVERS_IMU_INVENSENSE_ICM20602=y
-CONFIG_DRIVERS_BAROMETER_BMP280=y
-CONFIG_DRIVERS_GPS=y
-CONFIG_DRIVERS_MAGNETOMETER_MEMSIC_MMC5983MA=y
-CONFIG_DRIVERS_MAGNETOMETER_AKM_AK09916=y
-CONFIG_DRIVERS_PCA9685_PWM_OUT=y
-CONFIG_PCA9685_USE_EXTERNAL_CRYSTAL=y
-CONFIG_DRIVERS_RC_INPUT=y
-CONFIG_DRIVERS_SMART_BATTERY_BATMON=y
-CONFIG_COMMON_RC=y
-CONFIG_COMMON_DIFFERENTIAL_PRESSURE=y
-CONFIG_COMMON_DISTANCE_SENSOR=y
-CONFIG_MODULES_AIRSPEED_SELECTOR=y
-CONFIG_MODULES_ATTITUDE_ESTIMATOR_Q=y
-CONFIG_MODULES_BATTERY_STATUS=y
-CONFIG_MODULES_CAMERA_FEEDBACK=y
-CONFIG_MODULES_COMMANDER=y
-CONFIG_MODULES_CONTROL_ALLOCATOR=y
-CONFIG_MODULES_DATAMAN=y
-CONFIG_MODULES_EKF2=y
-CONFIG_MODULES_EVENTS=y
-CONFIG_MODULES_FLIGHT_MODE_MANAGER=y
-CONFIG_MODULES_GIMBAL=y
-CONFIG_MODULES_GYRO_CALIBRATION=y
-CONFIG_MODULES_GYRO_FFT=y
-CONFIG_MODULES_LAND_DETECTOR=y
-CONFIG_MODULES_LANDING_TARGET_ESTIMATOR=y
-CONFIG_MODULES_LOAD_MON=y
-CONFIG_MODULES_LOCAL_POSITION_ESTIMATOR=y
-CONFIG_MODULES_LOGGER=y
-CONFIG_MODULES_MAG_BIAS_ESTIMATOR=y
-CONFIG_MODULES_MAVLINK=y
-CONFIG_MODULES_MC_HOVER_THRUST_ESTIMATOR=y
-CONFIG_MODULES_NAVIGATOR=y
-CONFIG_MODULES_RC_UPDATE=y
-CONFIG_MODULES_SENSORS=y
-CONFIG_MODULES_SIMULATION_SIMULATOR_SIH=y
-CONFIG_MODULES_TEMPERATURE_COMPENSATION=y
-CONFIG_MODULES_UUV_ATT_CONTROL=y
-CONFIG_MODULES_UUV_POS_CONTROL=y
-CONFIG_MODULES_FW_ATT_CONTROL=y
-CONFIG_MODULES_FW_AUTOTUNE_ATTITUDE_CONTROL=y
-CONFIG_MODULES_FW_POS_CONTROL=y
-CONFIG_MODULES_FW_RATE_CONTROL=y
-CONFIG_MODULES_MANUAL_CONTROL=y
-CONFIG_MODULES_MC_ATT_CONTROL=y
-CONFIG_MODULES_MC_AUTOTUNE_ATTITUDE_CONTROL=y
-CONFIG_MODULES_MC_POS_CONTROL=y
-CONFIG_MODULES_MC_RATE_CONTROL=y
-CONFIG_MODULES_ROVER_POS_CONTROL=y
-CONFIG_MODULES_VTOL_ATT_CONTROL=y
-CONFIG_SYSTEMCMDS_BSONDUMP=y
-CONFIG_SYSTEMCMDS_DYN=y
-CONFIG_SYSTEMCMDS_LED_CONTROL=y
-CONFIG_SYSTEMCMDS_PARAM=y
-CONFIG_SYSTEMCMDS_PERF=y
-CONFIG_SYSTEMCMDS_SD_BENCH=y
-CONFIG_SYSTEMCMDS_SHUTDOWN=y
-CONFIG_SYSTEMCMDS_TOPIC_LISTENER=y
-CONFIG_SYSTEMCMDS_TUNE_CONTROL=y
-CONFIG_SYSTEMCMDS_UORB=y
-CONFIG_SYSTEMCMDS_VER=y
-CONFIG_SYSTEMCMDS_WORK_QUEUE=y
-CONFIG_EXAMPLES_DYN_HELLO=y
-CONFIG_EXAMPLES_FAKE_GPS=y
-CONFIG_EXAMPLES_HELLO=y
-CONFIG_EXAMPLES_PX4_MAVLINK_DEBUG=y
-CONFIG_EXAMPLES_PX4_SIMPLE_APP=y
-CONFIG_EXAMPLES_WORK_ITEM=y

boards/bluerobotics/navigator/init/rc.board_defaults

@@ -1,13 +0,0 @@
-#!/bin/sh
-#
-# board specific defaults
-#------------------------------------------------------------------------------
-
-# system_power not implemented
-param set CBRK_SUPPLY_CHK 894281
-
-# 1K + 4.7K
-param set BAT1_V_DIV 5.7
-
-# Always keep current config
-param set SYS_AUTOCONFIG 0

boards/bluerobotics/navigator/init/rc.board_extras

@@ -1,7 +0,0 @@
-#!/bin/sh
-#
-# board specific extras init
-#------------------------------------------------------------------------------
-
-rc_input start -d /dev/ttyAMA1
-rc_update start

boards/bluerobotics/navigator/init/rc.board_sensors

@@ -1,39 +0,0 @@
-#!/bin/sh
-#
-# Navigator specific board sensors init
-#------------------------------------------------------------------------------
-
-if ! mmc5983ma start -s -m 0 -R 4
-then
-	echo "mmc5983ma not found."
-fi
-
-if ! ak09916 start -I -R 6
-then
-	echo "AK09916 not found."
-fi
-
-if ! icm20602 start -s -m 0 -R 14
-then
-	echo "ICM20602 not found."
-fi
-
-if ! bmp280 start -I
-then
-	echo "bmp280 not found."
-fi
-
-if ! ads1115 start -I
-then
-	echo "ads1115 not found."
-fi
-
-if ! pca9685_pwm_out start -a 0x40 -b 4
-then
-	echo "pca9685_pwm_out not found."
-fi
-
-if ! neopixel start
-then
-	echo "neopixel not found."
-fi

boards/bluerobotics/navigator/neopixel/CMakeLists.txt

@@ -1,36 +0,0 @@
-############################################################################
-#
-#   Copyright (c) 2024 PX4 Development Team. All rights reserved.
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions
-# are met:
-#
-# 1. Redistributions of source code must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-# 2. Redistributions in binary form must reproduce the above copyright
-#    notice, this list of conditions and the following disclaimer in
-#    the documentation and/or other materials provided with the
-#    distribution.
-# 3. Neither the name PX4 nor the names of its contributors may be
-#    used to endorse or promote products derived from this software
-#    without specific prior written permission.
-#
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
-# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
-# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
-# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
-# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
-# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
-# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
-# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-# POSSIBILITY OF SUCH DAMAGE.
-#
-############################################################################
-
-px4_add_library(arch_srgbled_dma
-	srgbled_impl.cpp
-)

boards/bluerobotics/navigator/neopixel/srgbled_impl.cpp

@@ -1,157 +0,0 @@
-/****************************************************************************
- *
- *   Copyright (c) 2024 PX4 Development Team. All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- * 3. Neither the name PX4 nor the names of its contributors may be
- *    used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ****************************************************************************/
-
-/**
- * @file srgbled_impl.cpp
- *
- * Implementation of functions to control NeoPixel LEDs on the BlueRobotics Navigator for the neopixel driver.
- *
- * Definitions:
- * - BOARD_HAS_N_S_RGB_LED: Number of NeoPixel LEDs on the Navigator.
- * - BOARD_RGB_SPI_BUS: SPI bus connected to the NeoPixel data line.
- * - BOARD_RGB_SPI_FREQ: SPI bus frequency for the NeoPixel connection.
- */
-
-#include <board_config.h>
-#include <drivers/drv_neopixel.h>
-#include <px4_platform_common/i2c_spi_buses.h>
-#include <px4_platform_common/log.h>
-#include <px4_platform_common/px4_config.h>
-#include <px4_platform_common/sem.h>
-
-#if defined(BOARD_HAS_N_S_RGB_LED)
-
-#if !defined(BOARD_RGB_SPI_BUS)
-#  error  BOARD_RGB_SPI_BUS must be defined to use the NeoPixel driver implementation for the BlueRobotics Navigator
-#endif
-#if !defined(BOARD_RGB_SPI_FREQ)
-#  error  BOARD_RGB_SPI_FREQ must be defined to use the NeoPixel driver implementation for the BlueRobotics Navigator
-#endif
-
-#define LED_T0 0b11000000
-#define LED_T1 0b11110000
-
-class NavigatorLED : public device::SPI
-{
-public:
-	NavigatorLED();
-	~NavigatorLED() override = default;
-
-	int init();
-	int write(uint8_t red, uint8_t green, uint8_t blue);
-	int deinit();
-
-protected:
-	void _setup_data(uint8_t red, uint8_t green, uint8_t blue);
-
-private:
-	uint8_t _data[24];
-	px4_sem_t _sem;
-};
-
-NavigatorLED::NavigatorLED() :
-	// By default we don't use the CS line and MODE must be 0 for compatibility with Raspberry Pi
-	SPI(DRV_DEVTYPE_UNUSED, "navigator-neopixel", BOARD_RGB_SPI_BUS, 0, SPIDEV_MODE0, BOARD_RGB_SPI_FREQ)
-{
-	px4_sem_init(&_sem, 0, 1);
-}
-
-int NavigatorLED::init()
-{
-	int ret = SPI::init();
-
-	if (ret != PX4_OK) {
-		PX4_ERR("Neopixel SPI init failed");
-		return ret;
-	}
-
-	return PX4_OK;
-}
-
-void NavigatorLED::_setup_data(uint8_t red, uint8_t green, uint8_t blue)
-{
-	for (uint8_t i = 0; i < 8; i++) {
-		_data[i] = (green & (1 << (7 - i))) ? LED_T1 : LED_T0;
-	}
-
-	for (uint8_t i = 0; i < 8; i++) {
-		_data[8 + i] = (red & (1 << (7 - i))) ? LED_T1 : LED_T0;
-	}
-
-	for (uint8_t i = 0; i < 8; i++) {
-		_data[16 + i] = (blue & (1 << (7 - i))) ? LED_T1 : LED_T0;
-	}
-}
-
-int NavigatorLED::write(uint8_t red, uint8_t green, uint8_t blue)
-{
-	_setup_data(red, green, blue);
-
-	px4_sem_wait(&_sem);
-
-	int ret = transfer(_data, nullptr, sizeof(_data));
-
-	px4_sem_post(&_sem);
-
-	if (ret != PX4_OK) {
-		PX4_ERR("Failed to write data to NeoPixel %d", ret);
-	}
-
-	return ret;
-}
-
-int NavigatorLED::deinit()
-{
-	PX4_INFO("Neopixel deinitialized");
-	return PX4_OK;
-}
-
-// Neopixel driver impl
-
-NavigatorLED navigator_led;
-
-int neopixel_init(neopixel::NeoLEDData *led_data, int number_of_packages)
-{
-	return navigator_led.init();
-}
-
-int neopixel_write(neopixel::NeoLEDData *led_data, int number_of_packages)
-{
-	return navigator_led.write(led_data->R(), led_data->G(), led_data->B());
-}
-
-int neopixel_deinit()
-{
-	return navigator_led.deinit();
-}
-#endif // defined(BOARD_HAS_N_S_RGB_LED)

boards/bluerobotics/navigator/src/CMakeLists.txt

@@ -1,37 +0,0 @@
-############################################################################
-#
-#   Copyright (c) 2024 PX4 Development Team. All rights reserved.
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions
-# are met:
-#
-# 1. Redistributions of source code must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-# 2. Redistributions in binary form must reproduce the above copyright
-#    notice, this list of conditions and the following disclaimer in
-#    the documentation and/or other materials provided with the
-#    distribution.
-# 3. Neither the name PX4 nor the names of its contributors may be
-#    used to endorse or promote products derived from this software
-#    without specific prior written permission.
-#
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
-# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
-# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
-# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
-# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
-# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
-# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
-# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-# POSSIBILITY OF SUCH DAMAGE.
-#
-############################################################################
-
-add_library(drivers_board
-	i2c.cpp
-	spi.cpp
-)

boards/bluerobotics/navigator/src/board_config.h

@@ -1,66 +0,0 @@
-/****************************************************************************
- *
- *   Copyright (C) 2024 PX4 Development Team. All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- * 3. Neither the name PX4 nor the names of its contributors may be
- *    used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ****************************************************************************/
-
-/**
- * @file board_config.h
- *
- * BlueRobotics Navigator board configuration.
- */
-
-#pragma once
-
-#define BOARD_OVERRIDE_UUID "BRNAVID000000000" // must be of length 16
-#define PX4_SOC_ARCH_ID     PX4_SOC_ARCH_ID_RPI
-
-#define BOARD_MAX_LEDS 1
-
-// Neopixel config
-#define BOARD_HAS_N_S_RGB_LED 1
-#define BOARD_RGB_SPI_BUS 0
-#define BOARD_RGB_SPI_FREQ 8 * 1000 * 1000 // Emulated 800Kbps since we use 1 byte as 1 bit
-
-// I2C
-#define CONFIG_I2C 1
-#define PX4_NUMBER_I2C_BUSES    3
-
-// SPI
-#define CONFIG_SPI 1
-
-#define ADC_BATTERY_VOLTAGE_CHANNEL  3
-#define ADC_BATTERY_CURRENT_CHANNEL  2
-#define ADC_5V_RAIL_SENSE            0
-
-#define ADC_DP_V_DIV 1.0f
-
-#include <system_config.h>
-#include <px4_platform_common/board_common.h>

boards/bluerobotics/navigator/src/i2c.cpp

@@ -1,40 +0,0 @@
-/****************************************************************************
- *
- *   Copyright (C) 2024 PX4 Development Team. All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- * 3. Neither the name PX4 nor the names of its contributors may be
- *    used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ****************************************************************************/
-
-#include <px4_arch/i2c_hw_description.h>
-
-constexpr px4_i2c_bus_t px4_i2c_buses[I2C_BUS_MAX_BUS_ITEMS] = {
-	initI2CBusInternal(1),
-	initI2CBusInternal(4),
-	initI2CBusExternal(6),
-};