ci: remove ignores

Signed-off-by: Ramon Roche <mrpollo@gmail.com>

.github/workflows/build_all_targets.yml

@@ -16,11 +16,13 @@ on:
       - 'release/**'
     paths-ignore:
       - 'docs/**'
+      - '.github/**'
   pull_request:
     branches:
-      - '**'
+      - '*'
     paths-ignore:
       - 'docs/**'
+      - '.github/**'
 
 jobs:
   group_targets:

.github/workflows/checks.yml

@@ -9,7 +9,7 @@ on:
       - '.github/**'
   pull_request:
     branches:
-      - '**'
+    - '*'
     paths-ignore:
       - 'docs/**'
       - '.github/**'

.github/workflows/clang-tidy.yml

@@ -9,7 +9,7 @@ on:
       - '.github/**'
   pull_request:
     branches:
-      - '**'
+    - '*'
     paths-ignore:
       - 'docs/**'
       - '.github/**'

.github/workflows/compile_macos.yml

@@ -6,23 +6,18 @@ on:
     - 'main'
     paths-ignore:
       - 'docs/**'
-      - '.github/**'
   pull_request:
     branches:
-      - '**'
+      - '*'
     paths-ignore:
       - 'docs/**'
-      - '.github/**'
 
 jobs:
   build:
-    runs-on: macos-14
+    runs-on: macos-latest
     strategy:
       matrix:
-        config: [
-          px4_fmu-v5_default,
-          px4_sitl
-          ]
+        config: [px4_fmu-v5_default, px4_sitl]
     steps:
     - name: install Python 3.10
       uses: actions/setup-python@v5
@@ -32,8 +27,7 @@ jobs:
     - uses: actions/checkout@v4
 
     - name: setup
-      run: |
-        ./Tools/setup/macos.sh
+      run: ./Tools/setup/macos.sh; ./Tools/setup/macos.sh
 
     - name: Prepare ccache timestamp
       id: ccache_cache_timestamp
@@ -41,14 +35,12 @@ jobs:
       run: |
         string(TIMESTAMP current_date "%Y-%m-%d-%H;%M;%S" UTC)
         message("::set-output name=timestamp::${current_date}")
-
     - name: ccache cache files
       uses: actions/cache@v4
       with:
         path: ~/.ccache
         key: macos_${{matrix.config}}-ccache-${{steps.ccache_cache_timestamp.outputs.timestamp}}
         restore-keys: macos_${{matrix.config}}-ccache-
-
     - name: setup ccache
       run: |
           mkdir -p ~/.ccache
@@ -65,3 +57,7 @@ jobs:
           ccache -z
           make ${{matrix.config}}
           ccache -s
+
+    - name: Setup tmate session
+      if: ${{ failure() }}
+      uses: mxschmitt/action-tmate@v3

.github/workflows/compile_ubuntu.yml

@@ -12,7 +12,7 @@ on:
       - '.github/**'
   pull_request:
     branches:
-      - '**'
+      - '*'
     paths-ignore:
       - 'docs/**'
       - '.github/**'

.github/workflows/dev_container.yml

@@ -15,7 +15,7 @@ on:
       - '.github/**'
   pull_request:
     branches:
-      - '**'
+      - '*'
     paths-ignore:
       - 'docs/**'
       - '.github/**'

.github/workflows/docs_deploy.yml

@@ -1,6 +1,18 @@
 name: Docs - Deploy PX4 User Guide
 
 on:
+  push:
+    branches:
+      - 'main'
+      - 'release/**'
+    paths:
+      - 'docs/en/**'
+  pull_request:
+    branches:
+      - '*'
+    paths:
+      - 'docs/en/**'
+
   # Allows you to run this workflow manually from the Actions tab
   workflow_dispatch:
 
@@ -67,21 +79,16 @@ jobs:
 
       - name: Deploy
         run: |
-          git clone --single-branch --branch main --depth 1 https://${{ secrets.PX4BUILTBOT_PERSONAL_ACCESS_TOKEN }}@github.com/PX4/docs.px4.io.git
-          # make it an orphan branch
+          git clone --single-branch --branch main https://${{ secrets.PX4BUILTBOT_PERSONAL_ACCESS_TOKEN }}@github.com/PX4/docs.px4.io.git
+          rm -rf docs.px4.io/${BRANCH_NAME}
+          mkdir -p docs.px4.io/${BRANCH_NAME}
+          cp -r ~/_book/* docs.px4.io/${BRANCH_NAME}/
           cd docs.px4.io
-          CURRENT_DATETIME=$(date +'%Y%m%d_%H_%M')
-          git checkout --orphan "${CURRENT_DATETIME}_main"
-          rm -rf ${BRANCH_NAME}
-          mkdir -p ${BRANCH_NAME}
-          cp -r ~/_book/* ${BRANCH_NAME}/
           git config --global user.name "${{ secrets.PX4BUILDBOT_USER }}"
           git config --global user.email "${{ secrets.PX4BUILDBOT_EMAIL }}"
-          git add .
+          git add ${BRANCH_NAME}
           git commit -a -m "PX4 docs build update (vitepress) `date`"
-          # push branch as backup
-          git push origin "${CURRENT_DATETIME}_main"
-          # Now make main from backup and push updated
-          git branch -D main
-          git checkout -b main
+          #git add .
+          #git commit --amend -m "PX4 docs build update (vitepress) `date`"
+          #git commit --allow-empty -m "Empty commit to force rebuild"
           git push origin main -f

.github/workflows/docs_deploy_aws.yml

@@ -1,114 +0,0 @@
-name: Docs - Deploy PX4 User Guide to AWS
-
-on:
-  push:
-    branches:
-      - "main"
-      - "release/**"
-    paths:
-      - "docs/en/**"
-      - "docs/zh/**"
-      - "docs/uk/**"
-      - "docs/ko/**"
-  pull_request:
-    paths:
-      - "docs/en/**"
-      - "docs/zh/**"
-      - "docs/uk/**"
-      - "docs/ko/**"
-
-permissions:
-  contents: read
-  actions: read
-  id-token: write # for AWS OIDC
-
-concurrency:
-  group: docs-deploy
-  cancel-in-progress: false
-
-jobs:
-  build:
-    runs-on: [runs-on,runner=8cpu-linux-x64,image=ubuntu24-full-x64,"run-id=${{ github.run_id }}",spot=false,extras=s3-cache]
-    outputs:
-      branchname: ${{ steps.set-branch.outputs.branchname }}
-      releaseversion: ${{ steps.set-version.outputs.releaseversion }}
-    steps:
-      - uses: runs-on/action@v1
-
-      - name: Checkout
-        uses: actions/checkout@v4
-
-      - id: set-branch
-        run: echo "branchname=${GITHUB_HEAD_REF:-${GITHUB_REF#refs/heads/}}" >> $GITHUB_OUTPUT
-
-      - id: set-version
-        run: |
-          branch="${{ steps.set-branch.outputs.branchname }}"
-          if [[ "$branch" == "main" ]]; then
-            version="main"
-          else
-            version="v${branch#release/}"
-          fi
-          echo "releaseversion=$version" >> $GITHUB_OUTPUT
-
-      - name: Setup Node
-        uses: actions/setup-node@v4
-        with:
-          node-version: 20
-          cache: npm
-          cache-dependency-path: ./docs/yarn.lock
-
-      - name: Install dependencies
-        run: yarn install --frozen-lockfile --cwd ./docs
-
-      - name: Build with VitePress
-        working-directory: ./docs
-        env:
-          BRANCH_NAME: ${{ steps.set-version.outputs.releaseversion }}
-        run: |
-          npm run docs:build_ubuntu
-          touch .vitepress/dist/.nojekyll
-          npm run docs:sitemap
-
-      - name: Upload artifact
-        if: ${{ github.event_name == 'push' || (github.event_name == 'pull_request' && github.event.pull_request.merged) || github.event_name == 'workflow_dispatch' }}
-        uses: actions/upload-artifact@v4
-        with:
-          name: px4_docs_build
-          path: docs/.vitepress/dist/
-          retention-days: 1
-
-  deploy:
-    if: ${{ github.event_name == 'push' || (github.event_name == 'pull_request' && github.event.pull_request.merged) || github.event_name == 'workflow_dispatch' }}
-    needs: build
-    runs-on: ubuntu-latest
-
-    steps:
-      - name: Download Artifact
-        uses: actions/download-artifact@v4
-        with:
-          name: px4_docs_build
-          path: ~/_book
-
-      - name: Configure AWS from OIDC
-        uses: aws-actions/configure-aws-credentials@v4
-        with:
-          role-to-assume: ${{ secrets.AWS_ROLE_ARN }}
-          aws-region: us-west-2
-
-      - name: Sanity check AWS credentials
-        run: aws sts get-caller-identity
-
-      - name: Upload HTML with short cache
-        run: |
-          aws s3 sync ~/_book/ s3://px4-docs/${{ needs.build.outputs.releaseversion }}/ \
-            --delete \
-            --exclude "*" --include "*.html" \
-            --cache-control "public, max-age=60"
-
-      - name: Upload assets with long cache
-        run: |
-          aws s3 sync ~/_book/ s3://px4-docs/${{ needs.build.outputs.releaseversion }}/ \
-            --delete \
-            --exclude "*.html" \
-            --cache-control "public, max-age=86400, immutable"

.github/workflows/ekf_functional_change_indicator.yml

@@ -3,7 +3,7 @@ name: EKF Change Indicator
 on:
   pull_request:
     branches:
-      - '**'
+    - '*'
     paths-ignore:
       - 'docs/**'
       - '.github/**'

.github/workflows/failsafe_sim.yml

@@ -9,7 +9,7 @@ on:
       - '.github/**'
   pull_request:
     branches:
-      - '**'
+    - '*'
     paths-ignore:
       - 'docs/**'
       - '.github/**'
@@ -43,7 +43,6 @@ jobs:
         run: |
           git clone https://github.com/emscripten-core/emsdk.git _emscripten_sdk
           cd _emscripten_sdk
-          git checkout 4.0.15
           ./emsdk install latest
           ./emsdk activate latest
 

.github/workflows/flash_analysis.yml

@@ -14,7 +14,7 @@ on:
       - '.github/**'
   pull_request:
     branches:
-      - '**'
+      - '*'
     paths-ignore:
       - 'docs/**'
       - '.github/**'

.github/workflows/mavros_mission_tests.yml

@@ -9,7 +9,7 @@ on:
       - '.github/**'
   pull_request:
     branches:
-      - '**'
+    - '*'
     paths-ignore:
       - 'docs/**'
       - '.github/**'

.github/workflows/mavros_offboard_tests.yml

@@ -9,7 +9,7 @@ on:
       - '.github/**'
   pull_request:
     branches:
-    - '**'
+    - '*'
     paths-ignore:
       - 'docs/**'
       - '.github/**'

.github/workflows/nuttx_env_config.yml

@@ -9,7 +9,7 @@ on:
       - '.github/**'
   pull_request:
     branches:
-      - '**'
+    - '*'
     paths-ignore:
       - 'docs/**'
       - '.github/**'

.github/workflows/python_checks.yml

@@ -9,7 +9,7 @@ on:
       - '.github/**'
   pull_request:
     branches:
-    - '**'
+    - '*'
     paths-ignore:
       - 'docs/**'
       - '.github/**'

.github/workflows/ros_integration_tests.yml

@@ -11,11 +11,13 @@ on:
     - 'main'
     paths-ignore:
       - 'docs/**'
+      - '.github/**'
   pull_request:
     branches:
-      - '**'
+    - '*'
     paths-ignore:
       - 'docs/**'
+      - '.github/**'
 
 jobs:
   build:
@@ -31,12 +33,6 @@ jobs:
     - name: Git Ownership Workaround
       run: git config --system --add safe.directory '*'
 
-    - name: Update ROS Keys
-      run: |
-        sudo rm /etc/apt/sources.list.d/ros2.list && \
-        sudo curl -sSL https://raw.githubusercontent.com/ros/rosdistro/master/ros.key -o /usr/share/keyrings/ros-archive-keyring.gpg && \
-        echo "deb [arch=$(dpkg --print-architecture) signed-by=/usr/share/keyrings/ros-archive-keyring.gpg] http://packages.ros.org/ros2/ubuntu $(. /etc/os-release && echo $UBUNTU_CODENAME) main" | sudo tee /etc/apt/sources.list.d/ros2.list > /dev/null
-
     - name: Install gazebo
       run: |
         apt update && apt install -y gazebo11 libgazebo11-dev gstreamer1.0-plugins-bad gstreamer1.0-plugins-base gstreamer1.0-plugins-good gstreamer1.0-plugins-ugly libgstreamer-plugins-base1.0-dev
@@ -85,7 +81,7 @@ jobs:
         . /opt/ros/galactic/setup.bash
         mkdir -p /opt/px4_ws/src
         cd /opt/px4_ws/src
-        git clone --recursive --branch release/1.16 https://github.com/Auterion/px4-ros2-interface-lib.git
+        git clone --recursive https://github.com/Auterion/px4-ros2-interface-lib.git
         cd ..
         # Copy messages to ROS workspace
         "${PX4_DIR}/Tools/copy_to_ros_ws.sh" "$(pwd)"

.github/workflows/ros_translation_node.yml

@@ -8,7 +8,7 @@ on:
       - '.github/**'
   pull_request:
     branches:
-      - '**'
+    - '*'
     paths-ignore:
       - 'docs/**'
       - '.github/**'

.github/workflows/sitl_tests.yml

@@ -14,7 +14,7 @@ on:
       - '.github/**'
   pull_request:
     branches:
-      - '**'
+    - '*'
     paths-ignore:
       - 'docs/**'
       - '.github/**'

.vscode/cmake-variants.yaml

@@ -301,11 +301,6 @@ CONFIG:
       buildType: MinSizeRel
       settings:
         CONFIG: holybro_durandal-v1_default
-    holybro_kakuteh7-wing_default:
-      short: holybro_kakuteh7-wing
-      buildType: MinSizeRel
-      settings:
-        CONFIG: holybro_kakuteh7-wing_default
     matek_h743-slim_default:
       short: matek_h743-slim
       buildType: MinSizeRel

ROMFS/px4fmu_common/init.d-posix/airframes/4009_gz_r1_rover

@@ -37,8 +37,8 @@ param set-default RO_YAW_P 5
 
 # Rover Position Control Parameters
 param set-default RO_SPEED_LIM 2
-param set-default RO_SPEED_I 0.01
-param set-default RO_SPEED_P 0.1
+param set-default RO_SPEED_I 0.5
+param set-default RO_SPEED_P 1
 
 # Pure Pursuit parameters
 param set-default PP_LOOKAHD_GAIN 1

ROMFS/px4fmu_common/init.d-posix/px4-rc.gzsim

@@ -28,15 +28,11 @@ else
     exit 1
 fi
 
-# Look for an already running world
-get_gz_world() {
-	gz_world=$( ${gz_command} topic -l | grep -m 1 -e "^/world/.*/clock" | sed 's/\/world\///g; s/\/clock//g' )
-}
-
 # If not standalone
 if [ -z "${PX4_GZ_STANDALONE}" ]; then
 
-	get_gz_world
+	# Look for an already running world
+	gz_world=$( ${gz_command} topic -l | grep -m 1 -e "^/world/.*/clock" | sed 's/\/world\///g; s/\/clock//g' )
 
 	# shellcheck disable=SC2153
 	if [ -z "${gz_world}" ] && [ -n "${PX4_GZ_WORLD}" ]; then
@@ -70,13 +66,6 @@ fi
 
 # Wait for Gazebo world to be ready before proceeding
 check_scene_info() {
-
-	get_gz_world
-
-	if [ -n "${PX4_GZ_STANDALONE}" ] && [ -n "${gz_world}" ]; then
-		PX4_GZ_WORLD=${gz_world}
-	fi
-
 	SERVICE_INFO=$(${gz_command} service -i --service "/world/${PX4_GZ_WORLD}/scene/info" 2>&1)
 	if echo "$SERVICE_INFO" | grep -q "Service providers"; then
 		return 0

ROMFS/px4fmu_common/init.d-posix/rcS

@@ -190,9 +190,6 @@ param set-default SYS_FAILURE_EN 1
 # does not go below 50% by default, but failure injection can trigger failsafes.
 param set-default COM_LOW_BAT_ACT 3
 
-# set default IP to localhost
-param set-default UXRCE_DDS_AG_IP 2130706433  # 127.0.0.1
-
 
 # Adapt timeout parameters if simulation runs faster or slower than realtime.
 if [ -n "$PX4_SIM_SPEED_FACTOR" ]; then
@@ -317,7 +314,7 @@ then
 	uxrce_dds_port="$PX4_UXRCE_DDS_PORT"
 fi
 
-uxrce_dds_client start -t udp -p $uxrce_dds_port $uxrce_dds_ns
+uxrce_dds_client start -t udp -h 127.0.0.1 -p $uxrce_dds_port $uxrce_dds_ns
 
 if param greater -s MNT_MODE_IN -1
 then
@@ -340,7 +337,11 @@ then
 	gyro_calibration start
 fi
 
-payload_deliverer start
+# Payload deliverer module if gripper is enabled
+if param compare -s PD_GRIPPER_EN 1
+then
+	payload_deliverer start
+fi
 
 if param compare -s ICE_EN 1
 then

ROMFS/px4fmu_common/init.d/airframes/50001_aion_robotics_r1_rover

@@ -37,14 +37,14 @@ param set-default RO_JERK_LIM 5
 param set-default RO_MAX_THR_SPEED 1.9
 
 # Rover Rate Control Parameters
-param set-default RO_YAW_RATE_I 0.1
+param set-default RO_YAW_RATE_I 0.01
 param set-default RO_YAW_RATE_P 0.1
 param set-default RO_YAW_RATE_LIM 250
 param set-default RO_YAW_ACCEL_LIM 600
 param set-default RO_YAW_DECEL_LIM 600
 
 # Rover Attitude Control Parameters
-param set-default RO_YAW_P 2.5
+param set-default RO_YAW_P 5
 
 # Rover Position Control Parameters
 param set-default RO_SPEED_LIM 1.6

ROMFS/px4fmu_common/init.d/rcS

@@ -560,7 +560,11 @@ else
 		px4flow start -X &
 	fi
 
-	payload_deliverer start
+	# Payload deliverer module if gripper is enabled
+	if param compare -s PD_GRIPPER_EN 1
+	then
+		payload_deliverer start
+	fi
 
 	if param compare -s ICE_EN 1
 	then

Tools/setup/macos.sh

@@ -42,8 +42,6 @@ else
 		echo "Installing PX4 general dependencies (homebrew px4-dev)"
 		brew tap PX4/px4
 		brew install px4-dev
-		# lock down gcc to v9 for v1.16 branch
-		brew install gcc-arm-none-eabi
 		brew install ncurses
 		brew install python-tk
 	fi

boards/ark/fmu-v6x/default.px4board

@@ -76,7 +76,6 @@ CONFIG_MODULES_MC_POS_CONTROL=y
 CONFIG_MODULES_MC_RATE_CONTROL=y
 CONFIG_MODULES_NAVIGATOR=y
 CONFIG_NUM_MISSION_ITMES_SUPPORTED=1000
-CONFIG_MODULES_PAYLOAD_DELIVERER=y
 CONFIG_MODULES_RC_UPDATE=y
 CONFIG_MODULES_ROVER_POS_CONTROL=y
 CONFIG_MODULES_SENSORS=y

boards/ark/fmu-v6x/encrypted_logs.px4board

@@ -6,8 +6,3 @@ CONFIG_DRIVERS_SW_CRYPTO=y
 # CONFIG_EKF2_AUX_GLOBAL_POSITION is not set
 CONFIG_PUBLIC_KEY0="../../../Tools/test_keys/key0.pub"
 CONFIG_PUBLIC_KEY1="../../../Tools/test_keys/rsa2048.pub"
-CONFIG_MODULES_FW_ATT_CONTROL=n
-CONFIG_MODULES_FW_AUTOTUNE_ATTITUDE_CONTROL=n
-CONFIG_MODULES_FW_POS_CONTROL=n
-CONFIG_MODULES_FW_RATE_CONTROL=n
-CONFIG_MODULES_VTOL_ATT_CONTROL=n

boards/ark/fmu-v6x/src/board_config.h

@@ -127,9 +127,6 @@
 #define SPI6_nRESET_EXTERNAL1       /* PF10 */ (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTF|GPIO_PIN10)
 #define SPI6_RESET(on_true)          px4_arch_gpiowrite(SPI6_nRESET_EXTERNAL1, !(on_true))
 
-// ADIS16507 hardware reset
-#define GPIO_ADIS16507_RESET(reset) SPI6_RESET(reset)
-
 /* I2C busses */
 
 /* Devices on the onboard buses.

boards/ark/fpv/default.px4board

@@ -56,12 +56,9 @@ CONFIG_MODULES_MC_HOVER_THRUST_ESTIMATOR=y
 CONFIG_MODULES_MC_POS_CONTROL=y
 CONFIG_MODULES_MC_RATE_CONTROL=y
 CONFIG_MODULES_NAVIGATOR=y
-CONFIG_MODULES_PAYLOAD_DELIVERER=y
-CONFIG_NUM_MISSION_ITMES_SUPPORTED=1000
 CONFIG_MODULES_RC_UPDATE=y
 CONFIG_MODULES_SENSORS=y
 CONFIG_MODULES_UXRCE_DDS_CLIENT=y
-CONFIG_MODULES_VTOL_ATT_CONTROL=y
 CONFIG_SYSTEMCMDS_ACTUATOR_TEST=y
 CONFIG_SYSTEMCMDS_BSONDUMP=y
 CONFIG_SYSTEMCMDS_DMESG=y

boards/ark/fpv/encrypted_logs.px4board

@@ -5,8 +5,3 @@ CONFIG_DRIVERS_SW_CRYPTO=y
 # CONFIG_EKF2_AUX_GLOBAL_POSITION is not set
 CONFIG_PUBLIC_KEY0="../../../Tools/test_keys/key0.pub"
 CONFIG_PUBLIC_KEY1="../../../Tools/test_keys/rsa2048.pub"
-CONFIG_MODULES_FW_ATT_CONTROL=n
-CONFIG_MODULES_FW_AUTOTUNE_ATTITUDE_CONTROL=n
-CONFIG_MODULES_FW_POS_CONTROL=n
-CONFIG_MODULES_FW_RATE_CONTROL=n
-CONFIG_MODULES_VTOL_ATT_CONTROL=n

boards/ark/fpv/nuttx-config/include/board_dma_map.h

@@ -34,25 +34,75 @@
 #pragma once
 
 // DMAMUX1 Using at most 8 Channels on DMA1 --------   Assigned
-#define DMAMAP_SPI1_RX    DMAMAP_DMA12_SPI1RX_0     // 1 DMA1:37 IIM-42653
-#define DMAMAP_SPI1_TX    DMAMAP_DMA12_SPI1TX_0     // 2 DMA1:38 IIM-42653
-#define DMAMAP_USART1_RX  DMAMAP_DMA12_USART1RX_0   // 3 DMA1:41 GPS1
-#define DMAMAP_USART1_TX  DMAMAP_DMA12_USART1TX_0   // 4 DMA1:42 GPS1
-#define DMAMAP_USART6_RX  DMAMAP_DMA12_USART6RX_0   // 5 DMA1:71 RC
-#define DMAMAP_USART6_TX  DMAMAP_DMA12_USART6TX_0   // 6 DMA1:72 RC
-// Timer 4 (DMAMAP_DMA12_TIM4UP_0)                  // 7 DMA1:32 TIM4UP/TIM4CH1-4
-// Timer 5 (DMAMAP_DMA12_TIM5UP_0)                  // 8 DMA1:50 TIM5UP/TIM5CH1-4
+//                                                     V
+
+// Timer 4 Channel 1                               /* DMA1:29 TIM4CH1 */
+
+#define DMAMAP_SPI1_RX    DMAMAP_DMA12_SPI1RX_0   /* 1 DMA1:37 IIM-42653 */
+#define DMAMAP_SPI1_TX    DMAMAP_DMA12_SPI1TX_0   /* 2 DMA1:38 IIM-42653 */
+
+//#define DMAMAP_SPI2_RX    DMAMAP_DMA12_SPI2RX_0  /* 3 DMA1:39 ICM-42688-P */
+//#define DMAMAP_SPI2_TX    DMAMAP_DMA12_SPI2TX_0  /* 4 DMA1:40 ICM-42688-P */
+
+#define DMAMAP_USART1_RX  DMAMAP_DMA12_USART1RX_0 /*  DMA1:41  GPS1 */
+#define DMAMAP_USART1_TX  DMAMAP_DMA12_USART1TX_0 /*  DMA1:42  GPS1 */
+
+//#define DMAMAP_USART3_RX  DMAMAP_DMA12_USART3RX_0 /*  DMA1:45 DEBUG */
+//#define DMAMAP_USART3_TX  DMAMAP_DMA12_USART3TX_0 /*  DMA1:46 DEBUG */
+
+// Timer 8 Channel 1                               /* DMA1:47 TIM8CH1 */
+// Timer 8 Channel 2                               /* DMA1:48 TIM8CH2 */
+// Timer 8 Channel 3                               /* DMA1:49 TIM8CH3 */
+// Timer 8 Channel 4                               /* DMA1:50 TIM8CH4 */
+
+// Timer 5 Channel 1                               /* DMA1:55 TIM5CH1 */
+// Timer 5 Channel 2                               /* DMA1:56 TIM5CH2 */
+// Timer 5 Channel 3                               /* DMA1:57 TIM5CH3 */
+// Timer 5 Channel 4                               /* DMA1:58 TIM5CH4 */
+
+// #define DMAMAP_UART4_RX   DMAMAP_DMA12_UART4RX_0  /*  DMA1:63 UART4 */
+// #define DMAMAP_UART4_TX   DMAMAP_DMA12_UART4TX_0  /*  DMA1:64 UART4 */
+
+#define DMAMAP_USART6_RX  DMAMAP_DMA12_USART6RX_0 /* 5 DMA1:71 RC */
+// #define DMAMAP_USART6_TX  DMAMAP_DMA12_USART6TX_0 /* 6 DMA1:72 RC */
+
+// Assigned in timer_config.cpp
+
+// Timer 4                                          /* 7 DMA1:32 TIM4UP */
+// Timer 5                                          /* 8 DMA1:50 TIM5UP */
 
 // DMAMUX2 Using at most 8 Channels on DMA2 --------   Assigned
-#define DMAMAP_USART2_RX  DMAMAP_DMA12_USART2RX_1   // 1 DMA2:43 VTX
-#define DMAMAP_UART5_RX   DMAMAP_DMA12_UART5RX_1    // 2 DMA2:65 VTX
-#define DMAMAP_UART5_TX   DMAMAP_DMA12_UART5TX_1    // 3 DMA2:66 VTX
-#define DMAMAP_UART7_RX   DMAMAP_DMA12_UART7RX_1    // 4 DMA2:79 TELEM1
-#define DMAMAP_UART7_TX   DMAMAP_DMA12_UART7TX_1    // 5 DMA2:80 TELEM1
-#define DMAMAP_USART3_RX  DMAMAP_DMA12_USART3RX_1   // 6 DMA2:45 DEBUG
-#define DMAMAP_USART3_TX  DMAMAP_DMA12_USART3TX_1   // 7 DMA2:46 DEBUG
-// available
+//                                                     V
+
+// Timer 4 Channel 1                               /* DMA2:29 TIM4CH1 */
+
+#define DMAMAP_USART2_RX  DMAMAP_DMA12_USART2RX_1   /* 3 DMA2:43 TELEM3 */
+#define DMAMAP_USART2_TX  DMAMAP_DMA12_USART2TX_1   /* 4 DMA2:44 TELEM3 */
+
+#define DMAMAP_USART3_RX  DMAMAP_DMA12_USART3RX_1   /* 3 DMA2:45 DEBUG */
+#define DMAMAP_USART3_TX  DMAMAP_DMA12_USART3TX_1   /* 4 DMA2:46 DEBUG */
+
+// Timer 8 Channel 1                                 /* DMA2:47 TIM8CH1 */
+// Timer 8 Channel 2                                 /* DMA2:48 TIM8CH2 */
+// Timer 8 Channel 3                                 /* DMA2:49 TIM8CH3 */
+// Timer 8 Channel 4                                 /* DMA2:50 TIM8CH4 */
+
+// Timer 5 Channel 1                                 /* DMA2:55 TIM5CH1 */
+// Timer 5 Channel 2                                 /* DMA2:56 TIM5CH2 */
+// Timer 5 Channel 3                                 /* DMA2:57 TIM5CH3 */
+// Timer 5 Channel 4                                 /* DMA2:58 TIM5CH4 */
+
+//#define DMAMAP_SPI3_RX    DMAMAP_DMA12_SPI3RX_1     /* 1 DMA2:61 BMI088 */
+//#define DMAMAP_SPI3_TX    DMAMAP_DMA12_SPI3TX_1     /* 2 DMA2:62 BMI088 */
+
+#define DMAMAP_UART5_RX   DMAMAP_DMA12_UART5RX_1    /* 5 DMA2:65 TELEM2 */
+#define DMAMAP_UART5_TX   DMAMAP_DMA12_UART5TX_1    /* 6 DMA2:66 TELEM2 */
+
+#define DMAMAP_UART7_RX   DMAMAP_DMA12_UART7RX_1    /* 7 DMA1:79 TELEM1 */
+#define DMAMAP_UART7_TX   DMAMAP_DMA12_UART7TX_1    /* 8 DMA1:80 TELEM1 */
 
 // DMAMUX2 Using at most 8 Channels on BDMA --------   Assigned
-#define DMAMAP_SPI6_RX    DMAMAP_BDMA_SPI6_RX       // 1 BDMA:11 SPI J11
-#define DMAMAP_SPI6_TX    DMAMAP_BDMA_SPI6_TX       // 2 BDMA:12 SPI J11
+//                                                     V
+
+#define DMAMAP_SPI6_RX    DMAMAP_BDMA_SPI6_RX       /* 1 BDMA:11 SPI J11 */
+#define DMAMAP_SPI6_TX    DMAMAP_BDMA_SPI6_TX       /* 2 BDMA:12 SPI J11 */

boards/ark/fpv/nuttx-config/nsh/defconfig

@@ -260,6 +260,8 @@ CONFIG_USART1_TXDMA=y
 CONFIG_USART2_BAUD=57600
 CONFIG_USART2_RXBUFSIZE=600
 CONFIG_USART2_RXDMA=y
+CONFIG_USART2_TXBUFSIZE=1500
+CONFIG_USART2_TXDMA=y
 CONFIG_USART3_BAUD=57600
 CONFIG_USART3_RXBUFSIZE=180
 CONFIG_USART3_RXDMA=y
@@ -270,7 +272,6 @@ CONFIG_USART6_BAUD=57600
 CONFIG_USART6_RXBUFSIZE=600
 CONFIG_USART6_RXDMA=y
 CONFIG_USART6_TXBUFSIZE=1500
-CONFIG_USART6_TXDMA=y
 CONFIG_USBDEV=y
 CONFIG_USBDEV_BUSPOWERED=y
 CONFIG_USBDEV_MAXPOWER=500

boards/corvon/743v1/bootloader.px4board

@@ -1,3 +0,0 @@
-CONFIG_BOARD_TOOLCHAIN="arm-none-eabi"
-CONFIG_BOARD_ARCHITECTURE="cortex-m7"
-CONFIG_BOARD_ROMFSROOT=""

boards/corvon/743v1/default.px4board

@@ -1,85 +0,0 @@
-CONFIG_BOARD_TOOLCHAIN="arm-none-eabi"
-CONFIG_BOARD_ARCHITECTURE="cortex-m7"
-CONFIG_BOARD_SERIAL_URT6="/dev/ttyS5"
-CONFIG_BOARD_SERIAL_GPS1="/dev/ttyS2"
-CONFIG_BOARD_SERIAL_TEL1="/dev/ttyS0"
-CONFIG_BOARD_SERIAL_TEL2="/dev/ttyS1"
-CONFIG_BOARD_SERIAL_TEL3="/dev/ttyS3"
-CONFIG_BOARD_SERIAL_TEL4="/dev/ttyS6"
-CONFIG_BOARD_SERIAL_RC="/dev/ttyS4"
-CONFIG_DRIVERS_ADC_BOARD_ADC=y
-CONFIG_DRIVERS_BAROMETER_DPS310=y
-CONFIG_DRIVERS_CDCACM_AUTOSTART=y
-CONFIG_COMMON_DIFFERENTIAL_PRESSURE=y
-CONFIG_DRIVERS_DIFFERENTIAL_PRESSURE_ASP5033=y
-CONFIG_DRIVERS_DIFFERENTIAL_PRESSURE_AUAV=y
-CONFIG_DRIVERS_DIFFERENTIAL_PRESSURE_ETS=y
-CONFIG_DRIVERS_DIFFERENTIAL_PRESSURE_MS4515=y
-CONFIG_DRIVERS_DSHOT=y
-CONFIG_DRIVERS_GPS=y
-CONFIG_DRIVERS_IMU_BOSCH_BMI088=y
-CONFIG_DRIVERS_IMU_BOSCH_BMI270=y
-CONFIG_COMMON_MAGNETOMETER=y
-CONFIG_DRIVERS_PPS_CAPTURE=y
-CONFIG_DRIVERS_PWM_OUT=y
-CONFIG_COMMON_RC=y
-CONFIG_DRIVERS_RC_INPUT=y
-CONFIG_DRIVERS_TAP_ESC=y
-CONFIG_COMMON_TELEMETRY=y
-CONFIG_DRIVERS_UAVCAN=y
-CONFIG_BOARD_UAVCAN_INTERFACES=1
-CONFIG_MODULES_BATTERY_STATUS=y
-CONFIG_MODULES_COMMANDER=y
-CONFIG_MODULES_CONTROL_ALLOCATOR=y
-CONFIG_MODULES_DATAMAN=y
-CONFIG_MODULES_EKF2=y
-CONFIG_MODULES_ESC_BATTERY=y
-CONFIG_MODULES_EVENTS=y
-CONFIG_MODULES_FLIGHT_MODE_MANAGER=y
-CONFIG_MODULES_FW_ATT_CONTROL=y
-CONFIG_MODULES_FW_AUTOTUNE_ATTITUDE_CONTROL=y
-CONFIG_MODULES_FW_POS_CONTROL=y
-CONFIG_MODULES_FW_RATE_CONTROL=y
-CONFIG_MODULES_GYRO_CALIBRATION=y
-CONFIG_MODULES_GYRO_FFT=y
-CONFIG_MODULES_LAND_DETECTOR=y
-CONFIG_MODULES_LANDING_TARGET_ESTIMATOR=y
-CONFIG_MODULES_LOAD_MON=y
-CONFIG_MODULES_LOCAL_POSITION_ESTIMATOR=y
-CONFIG_MODULES_LOGGER=y
-CONFIG_MODULES_MAG_BIAS_ESTIMATOR=y
-CONFIG_MODULES_MANUAL_CONTROL=y
-CONFIG_MODULES_MAVLINK=y
-CONFIG_MODULES_MC_ATT_CONTROL=y
-CONFIG_MODULES_MC_AUTOTUNE_ATTITUDE_CONTROL=y
-CONFIG_MODULES_MC_HOVER_THRUST_ESTIMATOR=y
-CONFIG_MODULES_MC_POS_CONTROL=y
-CONFIG_MODULES_MC_RATE_CONTROL=y
-CONFIG_MODULES_NAVIGATOR=y
-CONFIG_MODULES_PAYLOAD_DELIVERER=y
-CONFIG_MODULES_RC_UPDATE=y
-CONFIG_MODULES_SENSORS=y
-CONFIG_MODULES_TEMPERATURE_COMPENSATION=y
-CONFIG_MODULES_UXRCE_DDS_CLIENT=y
-CONFIG_MODULES_VTOL_ATT_CONTROL=y
-CONFIG_SYSTEMCMDS_ACTUATOR_TEST=y
-CONFIG_SYSTEMCMDS_DMESG=y
-CONFIG_SYSTEMCMDS_DUMPFILE=y
-CONFIG_SYSTEMCMDS_FAILURE=y
-CONFIG_SYSTEMCMDS_GPIO=y
-CONFIG_SYSTEMCMDS_HARDFAULT_LOG=y
-CONFIG_SYSTEMCMDS_I2CDETECT=y
-CONFIG_SYSTEMCMDS_NSHTERM=y
-CONFIG_SYSTEMCMDS_PARAM=y
-CONFIG_SYSTEMCMDS_PERF=y
-CONFIG_SYSTEMCMDS_REBOOT=y
-CONFIG_SYSTEMCMDS_SD_BENCH=y
-CONFIG_SYSTEMCMDS_SD_STRESS=y
-CONFIG_SYSTEMCMDS_SYSTEM_TIME=y
-CONFIG_SYSTEMCMDS_TOP=y
-CONFIG_SYSTEMCMDS_TOPIC_LISTENER=y
-CONFIG_SYSTEMCMDS_TUNE_CONTROL=y
-CONFIG_SYSTEMCMDS_UORB=y
-CONFIG_SYSTEMCMDS_USB_CONNECTED=y
-CONFIG_SYSTEMCMDS_VER=y
-CONFIG_SYSTEMCMDS_WORK_QUEUE=y

boards/corvon/743v1/firmware.prototype

@@ -1,13 +0,0 @@
-{
-    "board_id": 1188,
-    "magic": "PX4FWv1",
-    "description": "Firmware for the CORVON743v1 board",
-    "image": "",
-    "build_time": 0,
-    "summary": "CORVON743v1",
-    "version": "0.1",
-    "image_size": 0,
-    "image_maxsize": 1835008,
-    "git_identity": "",
-    "board_revision": 0
-}

boards/corvon/743v1/init/rc.board_defaults

@@ -1,24 +0,0 @@
-#!/bin/sh
-#
-# board specific defaults
-#------------------------------------------------------------------------------
-param set-default BAT1_A_PER_V 40
-param set-default BAT1_N_CELLS 4
-param set-default BAT1_V_CHARGED 4.2
-param set-default BAT1_V_DIV 21.2
-param set-default BAT1_V_EMPTY 3.2
-
-param set-default SYS_HAS_MAG 1
-param set-default PWM_MAIN_TIM0 -4
-param set-default RC_INPUT_PROTO -1
-
-param set-default IMU_GYRO_CUTOFF 80
-param set-default SYS_AUTOSTART 4001
-param set-default MC_PITCHRATE_K 0.4
-param set-default MC_ROLLRATE_K 0.35
-param set-default MC_YAWRATE_K 1.2
-param set-default MC_YAWRATE_MAX 360
-param set-default MAV_TYPE 2
-param set-default CA_AIRFRAME 0
-param set-default CA_ROTOR_COUNT 4
-param set-default CBRK_SUPPLY_CHK 894281

boards/corvon/743v1/init/rc.board_extras

@@ -1,7 +0,0 @@
-#!/bin/sh
-#
-# board specific extras init
-#------------------------------------------------------------------------------
-
-# enable onboard OSD chip
-# atxxxx start -s

boards/corvon/743v1/init/rc.board_sensors

@@ -1,18 +0,0 @@
-#!/bin/sh
-#
-# board specific sensors init
-#------------------------------------------------------------------------------
-
-board_adc start
-
-# # Internal SPI bus BMI088 accel/gyro
-bmi088 -s -b 2 -A -R 6 start
-bmi088 -s -b 2 -G -R 6 start
-
-# # Internal SPI bus BMI270 accel/gyro
-bmi270 -s -b 2 -R 0 start
-
-# Internal baro
-dps310 -I start -a 118
-
-ist8310 -I -R 2 start

boards/corvon/743v1/nuttx-config/bootloader/defconfig

@@ -1,85 +0,0 @@
-#
-# This file is autogenerated: PLEASE DO NOT EDIT IT.
-#
-# You can use "make menuconfig" to make any modifications to the installed .config file.
-# You can then do "make savedefconfig" to generate a new defconfig file that includes your
-# modifications.
-#
-# CONFIG_DEV_CONSOLE is not set
-# CONFIG_DISABLE_PSEUDOFS_OPERATIONS is not set
-# CONFIG_SPI_EXCHANGE is not set
-# CONFIG_STM32H7_SYSCFG is not set
-CONFIG_ARCH="arm"
-CONFIG_ARCH_BOARD_CUSTOM=y
-CONFIG_ARCH_BOARD_CUSTOM_DIR="../../../../boards/corvon/743v1/nuttx-config"
-CONFIG_ARCH_BOARD_CUSTOM_DIR_RELPATH=y
-CONFIG_ARCH_BOARD_CUSTOM_NAME="px4"
-CONFIG_ARCH_CHIP="stm32h7"
-CONFIG_ARCH_CHIP_STM32H743VI=y
-CONFIG_ARCH_CHIP_STM32H7=y
-CONFIG_ARCH_INTERRUPTSTACK=768
-CONFIG_ARMV7M_BASEPRI_WAR=y
-CONFIG_ARMV7M_ICACHE=y
-CONFIG_ARMV7M_MEMCPY=y
-CONFIG_ARMV7M_USEBASEPRI=y
-CONFIG_BOARDCTL=y
-CONFIG_BOARDCTL_RESET=y
-CONFIG_BOARD_ASSERT_RESET_VALUE=0
-CONFIG_BOARD_INITTHREAD_PRIORITY=254
-CONFIG_BOARD_LATE_INITIALIZE=y
-CONFIG_BOARD_LOOPSPERMSEC=95150
-CONFIG_BOARD_RESET_ON_ASSERT=2
-CONFIG_CDCACM=y
-CONFIG_CDCACM_IFLOWCONTROL=y
-CONFIG_CDCACM_PRODUCTID=0x004b
-CONFIG_CDCACM_PRODUCTSTR="CORVON743v1"
-CONFIG_CDCACM_RXBUFSIZE=600
-CONFIG_CDCACM_TXBUFSIZE=12000
-CONFIG_CDCACM_VENDORID=0x3162
-CONFIG_CDCACM_VENDORSTR="CORVON"
-CONFIG_DEBUG_FULLOPT=y
-CONFIG_DEBUG_SYMBOLS=y
-CONFIG_DEBUG_TCBINFO=y
-CONFIG_DEFAULT_SMALL=y
-CONFIG_EXPERIMENTAL=y
-CONFIG_FDCLONE_DISABLE=y
-CONFIG_FDCLONE_STDIO=y
-CONFIG_HAVE_CXX=y
-CONFIG_HAVE_CXXINITIALIZE=y
-CONFIG_IDLETHREAD_STACKSIZE=750
-CONFIG_INIT_ENTRYPOINT="bootloader_main"
-CONFIG_INIT_STACKSIZE=3194
-CONFIG_LIBC_FLOATINGPOINT=y
-CONFIG_LIBC_LONG_LONG=y
-CONFIG_LIBC_STRERROR=y
-CONFIG_MEMSET_64BIT=y
-CONFIG_MEMSET_OPTSPEED=y
-CONFIG_PREALLOC_TIMERS=50
-CONFIG_PTHREAD_STACK_MIN=512
-CONFIG_RAM_SIZE=245760
-CONFIG_RAM_START=0x20010000
-CONFIG_RAW_BINARY=y
-CONFIG_SIG_DEFAULT=y
-CONFIG_SIG_SIGALRM_ACTION=y
-CONFIG_SIG_SIGUSR1_ACTION=y
-CONFIG_SIG_SIGUSR2_ACTION=y
-CONFIG_SPI=y
-CONFIG_STACK_COLORATION=y
-CONFIG_START_DAY=30
-CONFIG_START_MONTH=11
-CONFIG_STDIO_BUFFER_SIZE=32
-CONFIG_STM32H7_BKPSRAM=y
-CONFIG_STM32H7_DMA1=y
-CONFIG_STM32H7_OTGFS=y
-CONFIG_STM32H7_PROGMEM=y
-CONFIG_STM32H7_TIM1=y
-CONFIG_SYSTEMTICK_HOOK=y
-CONFIG_SYSTEM_CDCACM=y
-CONFIG_TASK_NAME_SIZE=24
-CONFIG_TTY_SIGINT=y
-CONFIG_TTY_SIGINT_CHAR=0x03
-CONFIG_TTY_SIGTSTP=y
-CONFIG_USBDEV=y
-CONFIG_USBDEV_BUSPOWERED=y
-CONFIG_USBDEV_MAXPOWER=500
-CONFIG_USEC_PER_TICK=1000

boards/corvon/743v1/nuttx-config/include/board.h

@@ -1,426 +0,0 @@
-/************************************************************************************
- * nuttx-configs/px4_fmu-v6u/include/board.h
- *
- *   Copyright (C) 2016-2019 Gregory Nutt. All rights reserved.
- *   Authors: David Sidrane <david.sidrane@nscdg.com>
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- * 3. Neither the name NuttX nor the names of its contributors may be
- *    used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ************************************************************************************/
-#ifndef __NUTTX_CONFIG_CORVON743V1_INCLUDE_BOARD_H
-#define __NUTTX_CONFIG_CORVON743V1_INCLUDE_BOARD_H
-
-/************************************************************************************
- * Included Files
- ************************************************************************************/
-
-#include "board_dma_map.h"
-
-#include <nuttx/config.h>
-
-#ifndef __ASSEMBLY__
-# include <stdint.h>
-#endif
-
-#include "stm32_rcc.h"
-#include "stm32_sdmmc.h"
-
-/************************************************************************************
- * Pre-processor Definitions
- ************************************************************************************/
-
-/* Clocking *************************************************************************/
-/* The CORVON743V1  board provides the following clock sources:
- *
- *   X1: 8 MHz crystal for HSE
- *
- * So we have these clock source available within the STM32
- *
- *   HSI: 64 MHz RC factory-trimmed
- *   HSE:  8 MHz crystal for HSE
- */
-
-#define STM32_BOARD_XTAL        8000000ul
-
-#define STM32_HSI_FREQUENCY     16000000ul
-#define STM32_LSI_FREQUENCY     32000
-#define STM32_HSE_FREQUENCY     STM32_BOARD_XTAL
-#define STM32_LSE_FREQUENCY     32768
-
-/* Main PLL Configuration.
- *
- * PLL source is HSE = 8,000,000
- *
- * PLL_VCOx = (STM32_HSE_FREQUENCY / PLLM) * PLLN
- * Subject to:
- *
- *     1 <= PLLM <= 63
- *     4 <= PLLN <= 512
- *   150 MHz <= PLL_VCOL <= 420MHz
- *   192 MHz <= PLL_VCOH <= 836MHz
- *
- * SYSCLK  = PLL_VCO / PLLP
- * CPUCLK  = SYSCLK / D1CPRE
- * Subject to
- *
- *   PLLP1   = {2, 4, 6, 8, ..., 128}
- *   PLLP2,3 = {2, 3, 4, ..., 128}
- *   CPUCLK <= 480 MHz
- */
-
-#define STM32_BOARD_USEHSE
-
-#define STM32_PLLCFG_PLLSRC      RCC_PLLCKSELR_PLLSRC_HSE
-
-/* PLL1, wide 4 - 8 MHz input, enable DIVP, DIVQ, DIVR
- *
- *   PLL1_VCO = (8,000,000 / 1) * 120 = 960 MHz
- *
- *   PLL1P = PLL1_VCO/2  = 960 MHz / 2   = 480 MHz
- *   PLL1Q = PLL1_VCO/4  = 960 MHz / 4   = 240 MHz
- *   PLL1R = PLL1_VCO/8  = 960 MHz / 8   = 120 MHz
- */
-
-#define STM32_PLLCFG_PLL1CFG    (RCC_PLLCFGR_PLL1VCOSEL_WIDE | \
-				 RCC_PLLCFGR_PLL1RGE_4_8_MHZ | \
-				 RCC_PLLCFGR_DIVP1EN | \
-				 RCC_PLLCFGR_DIVQ1EN | \
-				 RCC_PLLCFGR_DIVR1EN)
-#define STM32_PLLCFG_PLL1M       RCC_PLLCKSELR_DIVM1(1)
-#define STM32_PLLCFG_PLL1N       RCC_PLL1DIVR_N1(120)
-#define STM32_PLLCFG_PLL1P       RCC_PLL1DIVR_P1(2)
-#define STM32_PLLCFG_PLL1Q       RCC_PLL1DIVR_Q1(4)
-#define STM32_PLLCFG_PLL1R       RCC_PLL1DIVR_R1(8)
-
-#define STM32_VCO1_FREQUENCY     ((STM32_HSE_FREQUENCY / 1) * 120)
-#define STM32_PLL1P_FREQUENCY    (STM32_VCO1_FREQUENCY / 2)
-#define STM32_PLL1Q_FREQUENCY    (STM32_VCO1_FREQUENCY / 4)
-#define STM32_PLL1R_FREQUENCY    (STM32_VCO1_FREQUENCY / 8)
-
-/* PLL2 */
-
-#define STM32_PLLCFG_PLL2CFG     (RCC_PLLCFGR_PLL2VCOSEL_WIDE | \
-				  RCC_PLLCFGR_PLL2RGE_4_8_MHZ | \
-				  RCC_PLLCFGR_DIVP2EN | \
-				  RCC_PLLCFGR_DIVQ2EN | \
-				  RCC_PLLCFGR_DIVR2EN)
-#define STM32_PLLCFG_PLL2M       RCC_PLLCKSELR_DIVM2(2)
-#define STM32_PLLCFG_PLL2N       RCC_PLL2DIVR_N2(48)
-#define STM32_PLLCFG_PLL2P       RCC_PLL2DIVR_P2(2)
-#define STM32_PLLCFG_PLL2Q       RCC_PLL2DIVR_Q2(2)
-#define STM32_PLLCFG_PLL2R       RCC_PLL2DIVR_R2(2)
-
-#define STM32_VCO2_FREQUENCY     ((STM32_HSE_FREQUENCY / 2) * 48)
-#define STM32_PLL2P_FREQUENCY    (STM32_VCO2_FREQUENCY / 2)
-#define STM32_PLL2Q_FREQUENCY    (STM32_VCO2_FREQUENCY / 2)
-#define STM32_PLL2R_FREQUENCY    (STM32_VCO2_FREQUENCY / 2)
-
-/* PLL3 */
-
-#define STM32_PLLCFG_PLL3CFG    (RCC_PLLCFGR_PLL3VCOSEL_WIDE | \
-				 RCC_PLLCFGR_PLL3RGE_4_8_MHZ | \
-				 RCC_PLLCFGR_DIVQ3EN)
-#define STM32_PLLCFG_PLL3M      RCC_PLLCKSELR_DIVM3(2)
-#define STM32_PLLCFG_PLL3N      RCC_PLL3DIVR_N3(48)
-#define STM32_PLLCFG_PLL3P      RCC_PLL3DIVR_P3(2)
-#define STM32_PLLCFG_PLL3Q      RCC_PLL3DIVR_Q3(4)
-#define STM32_PLLCFG_PLL3R      RCC_PLL3DIVR_R3(2)
-
-#define STM32_VCO3_FREQUENCY    ((STM32_HSE_FREQUENCY / 2) * 48)
-#define STM32_PLL3P_FREQUENCY   (STM32_VCO3_FREQUENCY / 2)
-#define STM32_PLL3Q_FREQUENCY   (STM32_VCO3_FREQUENCY / 4)
-#define STM32_PLL3R_FREQUENCY   (STM32_VCO3_FREQUENCY / 2)
-
-/* SYSCLK = PLL1P = 480MHz
- * CPUCLK = SYSCLK / 1 = 480 MHz
- */
-
-#define STM32_RCC_D1CFGR_D1CPRE  (RCC_D1CFGR_D1CPRE_SYSCLK)
-#define STM32_SYSCLK_FREQUENCY   (STM32_PLL1P_FREQUENCY)
-#define STM32_CPUCLK_FREQUENCY   (STM32_SYSCLK_FREQUENCY / 1)
-
-/* Configure Clock Assignments */
-
-/* AHB clock (HCLK) is SYSCLK/2 (240 MHz max)
- * HCLK1 = HCLK2 = HCLK3 = HCLK4 = 240
- */
-
-#define STM32_RCC_D1CFGR_HPRE   RCC_D1CFGR_HPRE_SYSCLKd2        /* HCLK  = SYSCLK / 2 */
-#define STM32_ACLK_FREQUENCY    (STM32_CPUCLK_FREQUENCY / 2)    /* ACLK in D1, HCLK3 in D1 */
-#define STM32_HCLK_FREQUENCY    (STM32_CPUCLK_FREQUENCY / 2)    /* HCLK in D2, HCLK4 in D3 */
-#define STM32_BOARD_HCLK        STM32_HCLK_FREQUENCY            /* same as above, to satisfy compiler */
-
-/* APB1 clock (PCLK1) is HCLK/2 (120 MHz) */
-
-#define STM32_RCC_D2CFGR_D2PPRE1  RCC_D2CFGR_D2PPRE1_HCLKd2       /* PCLK1 = HCLK / 2 */
-#define STM32_PCLK1_FREQUENCY     (STM32_HCLK_FREQUENCY/2)
-
-/* APB2 clock (PCLK2) is HCLK/2 (120 MHz) */
-
-#define STM32_RCC_D2CFGR_D2PPRE2  RCC_D2CFGR_D2PPRE2_HCLKd2       /* PCLK2 = HCLK / 2 */
-#define STM32_PCLK2_FREQUENCY     (STM32_HCLK_FREQUENCY/2)
-
-/* APB3 clock (PCLK3) is HCLK/2 (120 MHz) */
-
-#define STM32_RCC_D1CFGR_D1PPRE   RCC_D1CFGR_D1PPRE_HCLKd2        /* PCLK3 = HCLK / 2 */
-#define STM32_PCLK3_FREQUENCY     (STM32_HCLK_FREQUENCY/2)
-
-/* APB4 clock (PCLK4) is HCLK/4 (120 MHz) */
-
-#define STM32_RCC_D3CFGR_D3PPRE   RCC_D3CFGR_D3PPRE_HCLKd2       /* PCLK4 = HCLK / 2 */
-#define STM32_PCLK4_FREQUENCY     (STM32_HCLK_FREQUENCY/2)
-
-/* Timer clock frequencies */
-
-/* Timers driven from APB1 will be twice PCLK1 */
-
-#define STM32_APB1_TIM2_CLKIN   (2*STM32_PCLK1_FREQUENCY)
-#define STM32_APB1_TIM3_CLKIN   (2*STM32_PCLK1_FREQUENCY)
-#define STM32_APB1_TIM4_CLKIN   (2*STM32_PCLK1_FREQUENCY)
-#define STM32_APB1_TIM5_CLKIN   (2*STM32_PCLK1_FREQUENCY)
-#define STM32_APB1_TIM6_CLKIN   (2*STM32_PCLK1_FREQUENCY)
-#define STM32_APB1_TIM7_CLKIN   (2*STM32_PCLK1_FREQUENCY)
-#define STM32_APB1_TIM12_CLKIN  (2*STM32_PCLK1_FREQUENCY)
-#define STM32_APB1_TIM13_CLKIN  (2*STM32_PCLK1_FREQUENCY)
-#define STM32_APB1_TIM14_CLKIN  (2*STM32_PCLK1_FREQUENCY)
-
-/* Timers driven from APB2 will be twice PCLK2 */
-
-#define STM32_APB2_TIM1_CLKIN   (2*STM32_PCLK2_FREQUENCY)
-#define STM32_APB2_TIM8_CLKIN   (2*STM32_PCLK2_FREQUENCY)
-#define STM32_APB2_TIM15_CLKIN  (2*STM32_PCLK2_FREQUENCY)
-#define STM32_APB2_TIM16_CLKIN  (2*STM32_PCLK2_FREQUENCY)
-#define STM32_APB2_TIM17_CLKIN  (2*STM32_PCLK2_FREQUENCY)
-
-/* Kernel Clock Configuration
- *
- * Note: look at Table 54 in ST Manual
- */
-
-/* I2C123 clock source */
-
-#define STM32_RCC_D2CCIP2R_I2C123SRC RCC_D2CCIP2R_I2C123SEL_HSI
-
-/* I2C4 clock source */
-
-#define STM32_RCC_D3CCIPR_I2C4SRC    RCC_D3CCIPR_I2C4SEL_HSI
-
-/* SPI123 clock source */
-
-#define STM32_RCC_D2CCIP1R_SPI123SRC RCC_D2CCIP1R_SPI123SEL_PLL2
-
-/* SPI45 clock source */
-
-#define STM32_RCC_D2CCIP1R_SPI45SRC  RCC_D2CCIP1R_SPI45SEL_PLL2
-
-/* SPI6 clock source */
-
-#define STM32_RCC_D3CCIPR_SPI6SRC    RCC_D3CCIPR_SPI6SEL_PLL2
-
-/* USB 1 and 2 clock source */
-
-#define STM32_RCC_D2CCIP2R_USBSRC    RCC_D2CCIP2R_USBSEL_PLL3
-
-/* ADC 1 2 3 clock source */
-
-#define STM32_RCC_D3CCIPR_ADCSEL     RCC_D3CCIPR_ADCSEL_PLL2
-
-/* FDCAN 1 clock source */
-
-#define STM32_RCC_D2CCIP1R_FDCANSEL  RCC_D2CCIP1R_FDCANSEL_HSE   /* FDCAN 1 2 clock source */
-
-#define STM32_FDCANCLK               STM32_HSE_FREQUENCY
-
-/* FLASH wait states
- *
- *  ------------ ---------- -----------
- *  Vcore        MAX ACLK   WAIT STATES
- *  ------------ ---------- -----------
- *  1.15-1.26 V     70 MHz    0
- *  (VOS1 level)   140 MHz    1
- *                 210 MHz    2
- *  1.05-1.15 V     55 MHz    0
- *  (VOS2 level)   110 MHz    1
- *                 165 MHz    2
- *                 220 MHz    3
- *  0.95-1.05 V     45 MHz    0
- *  (VOS3 level)    90 MHz    1
- *                 135 MHz    2
- *                 180 MHz    3
- *                 225 MHz    4
- *  ------------ ---------- -----------
- */
-
-#define BOARD_FLASH_WAITSTATES 2
-
-/* SDMMC definitions ********************************************************/
-
-/* Init 480kHz, freq = PLL1Q/(2*div)  div =  PLL1Q/(2*freq) */
-
-#define STM32_SDMMC_INIT_CLKDIV     (300 << STM32_SDMMC_CLKCR_CLKDIV_SHIFT)
-
-/* 20 MHz Max for now - more reliable on some boards than 25 MHz
- * 20 MHz = PLL1Q/(2*div), div =  PLL1Q/(2*freq), div = 6 = 240 / 40
- */
-
-#if defined(CONFIG_STM32H7_SDMMC_XDMA) || defined(CONFIG_STM32H7_SDMMC_IDMA)
-#  define STM32_SDMMC_MMCXFR_CLKDIV   (6 << STM32_SDMMC_CLKCR_CLKDIV_SHIFT)
-#else
-#  define STM32_SDMMC_MMCXFR_CLKDIV   (100 << STM32_SDMMC_CLKCR_CLKDIV_SHIFT)
-#endif
-#if defined(CONFIG_STM32H7_SDMMC_XDMA) || defined(CONFIG_STM32H7_SDMMC_IDMA)
-#  define STM32_SDMMC_SDXFR_CLKDIV    (6 << STM32_SDMMC_CLKCR_CLKDIV_SHIFT)
-#else
-#  define STM32_SDMMC_SDXFR_CLKDIV    (100 << STM32_SDMMC_CLKCR_CLKDIV_SHIFT)
-#endif
-
-#define STM32_SDMMC_CLKCR_EDGE      STM32_SDMMC_CLKCR_NEGEDGE
-
-/* LED definitions ******************************************************************/
-/* The board has two, LED_GREEN a Green LED and LED_BLUE a Blue LED,
- * that can be controlled by software.
- *
- * If CONFIG_ARCH_LEDS is not defined, then the user can control the LEDs in any way.
- * The following definitions are used to access individual LEDs.
- */
-
-/* LED index values for use with board_userled() */
-
-#define BOARD_LED1        0
-#define BOARD_LED2        1
-#define BOARD_LED3        2
-#define BOARD_NLEDS       3
-
-#define BOARD_LED_RED     BOARD_LED1
-#define BOARD_LED_GREEN   BOARD_LED2
-#define BOARD_LED_BLUE    BOARD_LED3
-
-/* LED bits for use with board_userled_all() */
-
-#define BOARD_LED1_BIT    (1 << BOARD_LED1)
-#define BOARD_LED2_BIT    (1 << BOARD_LED2)
-#define BOARD_LED3_BIT    (1 << BOARD_LED3)
-
-/* If CONFIG_ARCH_LEDS is defined, the usage by the board port is defined in
- * include/board.h and src/stm32_leds.c. The LEDs are used to encode OS-related
- * events as follows:
- *
- *
- *   SYMBOL                     Meaning                      LED state
- *                                                        Red   Green Blue
- *   ----------------------  --------------------------  ------ ------ ----*/
-
-#define LED_STARTED        0 /* NuttX has been started   OFF    OFF   OFF  */
-#define LED_HEAPALLOCATE   1 /* Heap has been allocated  OFF    OFF   ON   */
-#define LED_IRQSENABLED    2 /* Interrupts enabled       OFF    ON    OFF  */
-#define LED_STACKCREATED   3 /* Idle stack created       OFF    ON    ON   */
-#define LED_INIRQ          4 /* In an interrupt          N/C    N/C   GLOW */
-#define LED_SIGNAL         5 /* In a signal handler      N/C    GLOW  N/C  */
-#define LED_ASSERTION      6 /* An assertion failed      GLOW   N/C   GLOW */
-#define LED_PANIC          7 /* The system has crashed   Blink  OFF   N/C  */
-#define LED_IDLE           8 /* MCU is is sleep mode     ON     OFF   OFF  */
-
-/* Thus if the Green LED is statically on, NuttX has successfully booted and
- * is, apparently, running normally.  If the Red LED is flashing at
- * approximately 2Hz, then a fatal error has been detected and the system
- * has halted.
- */
-
-/* Alternate function pin selections ************************************************/
-
-#define GPIO_USART1_RX   GPIO_USART1_RX_2   /* PA10 */
-#define GPIO_USART1_TX   GPIO_USART1_TX_2   /* PA9  */
-
-#define GPIO_USART2_RX   GPIO_USART2_RX_1   /* PA3  */
-#define GPIO_USART2_TX   GPIO_USART2_TX_1   /* PA2  */
-
-#define GPIO_USART3_RX   GPIO_USART3_RX_3   /* PD9  */
-#define GPIO_USART3_TX   GPIO_USART3_TX_3   /* PD8  */
-
-#define GPIO_UART4_RX    GPIO_UART4_RX_2    /* PA1  */
-#define GPIO_UART4_TX    GPIO_UART4_TX_2    /* PA0  */
-
-#define GPIO_USART6_RX   GPIO_USART6_RX_1   /* PC7  */
-#define GPIO_USART6_TX   GPIO_USART6_TX_1   /* PC6  */
-
-#define GPIO_UART7_RX    GPIO_UART7_RX_3    /* PE7  */
-#define GPIO_UART7_TX    GPIO_UART7_TX_3    /* PE8  */
-
-
-#define GPIO_UART8_RX    GPIO_UART8_RX_1    /* PE0  */
-#define GPIO_UART8_TX    GPIO_UART8_TX_1    /* PE1  */
-
-
-/* CAN
- *
- * CAN1 is routed to transceiver.
- */
-
-#define GPIO_CAN1_RX     GPIO_CAN1_RX_2      /* PB8  */
-#define GPIO_CAN1_TX     GPIO_CAN1_TX_2      /* PB9  */
-
-/* SPI
- *
-
- */
-
-#define ADJ_SLEW_RATE(p) (((p) & ~GPIO_SPEED_MASK) | (GPIO_SPEED_2MHz))
-
-//#define GPIO_SPI1_MISO   GPIO_SPI1_MISO_1               /* PA6  */
-//#define GPIO_SPI1_MOSI   GPIO_SPI1_MOSI_1               /* PA7  */
-//#define GPIO_SPI1_SCK    ADJ_SLEW_RATE(GPIO_SPI1_SCK_1) /* PA5 */
-
-#define GPIO_SPI2_MISO   GPIO_SPI2_MISO_2               /* PC2  */
-#define GPIO_SPI2_MOSI   GPIO_SPI2_MOSI_3               /* PC3 */
-#define GPIO_SPI2_SCK    ADJ_SLEW_RATE(GPIO_SPI2_SCK_5) /* PD3  */
-
-
-
-/* I2C
- *
-
- *
- */
-
-#define GPIO_I2C1_SCL GPIO_I2C1_SCL_1       /* PB6  */
-#define GPIO_I2C1_SDA GPIO_I2C1_SDA_1       /* PB7  */
-
-#define GPIO_I2C1_SCL_GPIO                  (GPIO_OUTPUT | GPIO_OPENDRAIN | GPIO_SPEED_50MHz | GPIO_OUTPUT_SET | GPIO_PORTB | GPIO_PIN6)
-#define GPIO_I2C1_SDA_GPIO                  (GPIO_OUTPUT | GPIO_OPENDRAIN | GPIO_SPEED_50MHz | GPIO_OUTPUT_SET | GPIO_PORTB | GPIO_PIN7)
-
-#define GPIO_I2C2_SCL GPIO_I2C2_SCL_1       /* PB10 */
-#define GPIO_I2C2_SDA GPIO_I2C2_SDA_1       /* PB11 */
-
-#define GPIO_I2C2_SCL_GPIO                  (GPIO_OUTPUT | GPIO_OPENDRAIN | GPIO_SPEED_50MHz | GPIO_OUTPUT_SET | GPIO_PORTB | GPIO_PIN10)
-#define GPIO_I2C2_SDA_GPIO                  (GPIO_OUTPUT | GPIO_OPENDRAIN | GPIO_SPEED_50MHz | GPIO_OUTPUT_SET | GPIO_PORTB | GPIO_PIN11)
-
-# define PROBE_INIT(mask)
-# define PROBE(n,s)
-# define PROBE_MARK(n)
-
-#endif  /*__NUTTX_CONFIG_CORVON743V1_INCLUDE_BOARD_H  */

boards/corvon/743v1/nuttx-config/include/board_dma_map.h

@@ -1,36 +0,0 @@
-/****************************************************************************
- *
- *   Copyright (c) 2021 PX4 Development Team. All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- * 3. Neither the name PX4 nor the names of its contributors may be
- *    used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ****************************************************************************/
-
-#pragma once
-#define DMAMAP_SPI2_RX    DMAMAP_DMA12_SPI2RX_0 /* DMA1:39 */
-#define DMAMAP_SPI2_TX    DMAMAP_DMA12_SPI2TX_0 /* DMA1:40 */

boards/corvon/743v1/nuttx-config/nsh/defconfig

@@ -1,245 +0,0 @@
-#
-# This file is autogenerated: PLEASE DO NOT EDIT IT.
-#
-# You can use "make menuconfig" to make any modifications to the installed .config file.
-# You can then do "make savedefconfig" to generate a new defconfig file that includes your
-# modifications.
-#
-# CONFIG_DEV_CONSOLE is not set
-# CONFIG_DISABLE_ENVIRON is not set
-# CONFIG_DISABLE_PSEUDOFS_OPERATIONS is not set
-# CONFIG_DISABLE_PTHREAD is not set
-# CONFIG_MMCSD_HAVE_CARDDETECT is not set
-# CONFIG_MMCSD_HAVE_WRITEPROTECT is not set
-# CONFIG_MMCSD_MMCSUPPORT is not set
-# CONFIG_MMCSD_SPI is not set
-# CONFIG_NSH_DISABLEBG is not set
-# CONFIG_NSH_DISABLESCRIPT is not set
-# CONFIG_NSH_DISABLE_CAT is not set
-# CONFIG_NSH_DISABLE_CD is not set
-# CONFIG_NSH_DISABLE_CP is not set
-# CONFIG_NSH_DISABLE_DATE is not set
-# CONFIG_NSH_DISABLE_DF is not set
-# CONFIG_NSH_DISABLE_ECHO is not set
-# CONFIG_NSH_DISABLE_ENV is not set
-# CONFIG_NSH_DISABLE_EXEC is not set
-# CONFIG_NSH_DISABLE_EXIT is not set
-# CONFIG_NSH_DISABLE_EXPORT is not set
-# CONFIG_NSH_DISABLE_FREE is not set
-# CONFIG_NSH_DISABLE_GET is not set
-# CONFIG_NSH_DISABLE_HELP is not set
-# CONFIG_NSH_DISABLE_ITEF is not set
-# CONFIG_NSH_DISABLE_KILL is not set
-# CONFIG_NSH_DISABLE_LOOPS is not set
-# CONFIG_NSH_DISABLE_LS is not set
-# CONFIG_NSH_DISABLE_MKDIR is not set
-# CONFIG_NSH_DISABLE_MKFATFS is not set
-# CONFIG_NSH_DISABLE_MOUNT is not set
-# CONFIG_NSH_DISABLE_MV is not set
-# CONFIG_NSH_DISABLE_PRINTF is not set
-# CONFIG_NSH_DISABLE_PS is not set
-# CONFIG_NSH_DISABLE_PSSTACKUSAGE is not set
-# CONFIG_NSH_DISABLE_PWD is not set
-# CONFIG_NSH_DISABLE_RM is not set
-# CONFIG_NSH_DISABLE_RMDIR is not set
-# CONFIG_NSH_DISABLE_SEMICOLON is not set
-# CONFIG_NSH_DISABLE_SET is not set
-# CONFIG_NSH_DISABLE_SLEEP is not set
-# CONFIG_NSH_DISABLE_SOURCE is not set
-# CONFIG_NSH_DISABLE_TEST is not set
-# CONFIG_NSH_DISABLE_TIME is not set
-# CONFIG_NSH_DISABLE_UMOUNT is not set
-# CONFIG_NSH_DISABLE_UNSET is not set
-# CONFIG_NSH_DISABLE_USLEEP is not set
-CONFIG_ARCH="arm"
-CONFIG_ARCH_BOARD_CUSTOM=y
-CONFIG_ARCH_BOARD_CUSTOM_DIR="../../../../boards/corvon/743v1/nuttx-config"
-CONFIG_ARCH_BOARD_CUSTOM_DIR_RELPATH=y
-CONFIG_ARCH_BOARD_CUSTOM_NAME="px4"
-CONFIG_ARCH_CHIP="stm32h7"
-CONFIG_ARCH_CHIP_STM32H743VI=y
-CONFIG_ARCH_CHIP_STM32H7=y
-CONFIG_ARCH_INTERRUPTSTACK=768
-CONFIG_ARCH_STACKDUMP=y
-CONFIG_ARMV7M_BASEPRI_WAR=y
-CONFIG_ARMV7M_DCACHE=y
-CONFIG_ARMV7M_DTCM=y
-CONFIG_ARMV7M_ICACHE=y
-CONFIG_ARMV7M_MEMCPY=y
-CONFIG_ARMV7M_USEBASEPRI=y
-CONFIG_BOARDCTL_RESET=y
-CONFIG_BOARD_ASSERT_RESET_VALUE=0
-CONFIG_BOARD_CRASHDUMP=y
-CONFIG_BOARD_LOOPSPERMSEC=95150
-CONFIG_BOARD_RESET_ON_ASSERT=2
-CONFIG_BUILTIN=y
-CONFIG_CDCACM=y
-CONFIG_CDCACM_IFLOWCONTROL=y
-CONFIG_CDCACM_PRODUCTID=0x0036
-CONFIG_CDCACM_PRODUCTSTR="CORVON743v1"
-CONFIG_CDCACM_RXBUFSIZE=6000
-CONFIG_CDCACM_TXBUFSIZE=12000
-CONFIG_CDCACM_VENDORID=0x1B8C
-CONFIG_CDCACM_VENDORSTR="CORVON"
-CONFIG_DEBUG_FULLOPT=y
-CONFIG_DEBUG_HARDFAULT_ALERT=y
-CONFIG_DEBUG_MEMFAULT=y
-CONFIG_DEBUG_SYMBOLS=y
-CONFIG_DEFAULT_SMALL=y
-CONFIG_DEV_FIFO_SIZE=0
-CONFIG_DEV_PIPE_MAXSIZE=1024
-CONFIG_DEV_PIPE_SIZE=70
-CONFIG_EXPERIMENTAL=y
-CONFIG_FAT_DMAMEMORY=y
-CONFIG_FAT_LCNAMES=y
-CONFIG_FAT_LFN=y
-CONFIG_FAT_LFN_ALIAS_HASH=y
-CONFIG_FDCLONE_STDIO=y
-CONFIG_FS_BINFS=y
-CONFIG_FS_CROMFS=y
-CONFIG_FS_FAT=y
-CONFIG_FS_FATTIME=y
-CONFIG_FS_PROCFS=y
-CONFIG_FS_PROCFS_INCLUDE_PROGMEM=y
-CONFIG_FS_PROCFS_MAX_TASKS=64
-CONFIG_FS_PROCFS_REGISTER=y
-CONFIG_FS_ROMFS=y
-CONFIG_GRAN=y
-CONFIG_GRAN_INTR=y
-CONFIG_HAVE_CXX=y
-CONFIG_HAVE_CXXINITIALIZE=y
-CONFIG_I2C=y
-CONFIG_I2C_RESET=y
-CONFIG_IDLETHREAD_STACKSIZE=750
-CONFIG_INIT_ENTRYPOINT="nsh_main"
-CONFIG_INIT_STACKSIZE=3194
-CONFIG_IOB_NBUFFERS=24
-CONFIG_IOB_NCHAINS=24
-CONFIG_LIBC_FLOATINGPOINT=y
-CONFIG_LIBC_LONG_LONG=y
-CONFIG_LIBC_MAX_EXITFUNS=1
-CONFIG_LIBC_STRERROR=y
-CONFIG_MEMSET_64BIT=y
-CONFIG_MEMSET_OPTSPEED=y
-CONFIG_MMCSD=y
-CONFIG_MMCSD_SDIO=y
-CONFIG_MMCSD_SDIOWAIT_WRCOMPLETE=y
-CONFIG_MM_IOB=y
-CONFIG_MM_REGIONS=4
-CONFIG_NAME_MAX=40
-CONFIG_NSH_ARCHINIT=y
-CONFIG_NSH_ARGCAT=y
-CONFIG_NSH_BUILTIN_APPS=y
-CONFIG_NSH_CMDPARMS=y
-CONFIG_NSH_CROMFSETC=y
-CONFIG_NSH_LINELEN=128
-CONFIG_NSH_MAXARGUMENTS=15
-CONFIG_NSH_NESTDEPTH=8
-CONFIG_NSH_QUOTE=y
-CONFIG_NSH_ROMFSETC=y
-CONFIG_NSH_ROMFSSECTSIZE=128
-CONFIG_NSH_STRERROR=y
-CONFIG_NSH_VARS=y
-CONFIG_OTG_ID_GPIO_DISABLE=y
-CONFIG_PIPES=y
-CONFIG_PREALLOC_TIMERS=50
-CONFIG_PRIORITY_INHERITANCE=y
-CONFIG_PTHREAD_MUTEX_ROBUST=y
-CONFIG_PTHREAD_STACK_MIN=512
-CONFIG_RAM_SIZE=245760
-CONFIG_RAM_START=0x20010000
-CONFIG_RAW_BINARY=y
-CONFIG_RTC_DATETIME=y
-CONFIG_SCHED_HPWORK=y
-CONFIG_SCHED_HPWORKPRIORITY=249
-CONFIG_SCHED_HPWORKSTACKSIZE=1280
-CONFIG_SCHED_INSTRUMENTATION=y
-CONFIG_SCHED_INSTRUMENTATION_EXTERNAL=y
-CONFIG_SCHED_INSTRUMENTATION_SWITCH=y
-CONFIG_SCHED_LPWORK=y
-CONFIG_SCHED_LPWORKPRIORITY=50
-CONFIG_SCHED_LPWORKSTACKSIZE=1632
-CONFIG_SCHED_WAITPID=y
-CONFIG_SDMMC1_SDIO_PULLUP=y
-CONFIG_SEM_PREALLOCHOLDERS=32
-CONFIG_SERIAL_TERMIOS=y
-CONFIG_SIG_DEFAULT=y
-CONFIG_SIG_SIGALRM_ACTION=y
-CONFIG_SIG_SIGUSR1_ACTION=y
-CONFIG_SIG_SIGUSR2_ACTION=y
-CONFIG_SIG_SIGWORK=4
-CONFIG_STACK_COLORATION=y
-CONFIG_START_DAY=30
-CONFIG_START_MONTH=11
-CONFIG_STDIO_BUFFER_SIZE=256
-CONFIG_STM32H7_ADC1=y
-CONFIG_STM32H7_ADC3=y
-CONFIG_STM32H7_BBSRAM=y
-CONFIG_STM32H7_BBSRAM_FILES=5
-CONFIG_STM32H7_BDMA=y
-CONFIG_STM32H7_BKPSRAM=y
-CONFIG_STM32H7_DMA1=y
-CONFIG_STM32H7_DMA2=y
-CONFIG_STM32H7_DMACAPABLE=y
-CONFIG_STM32H7_FLASH_OVERRIDE_I=y
-CONFIG_STM32H7_I2C1=y
-CONFIG_STM32H7_I2C2=y
-CONFIG_STM32H7_I2C_DYNTIMEO=y
-CONFIG_STM32H7_I2C_DYNTIMEO_STARTSTOP=10
-CONFIG_STM32H7_OTGFS=y
-CONFIG_STM32H7_PROGMEM=y
-CONFIG_STM32H7_RTC=y
-CONFIG_STM32H7_RTC_HSECLOCK=y
-CONFIG_STM32H7_RTC_MAGIC_REG=1
-CONFIG_STM32H7_SAVE_CRASHDUMP=y
-CONFIG_STM32H7_SDMMC1=y
-CONFIG_STM32H7_SERIALBRK_BSDCOMPAT=y
-CONFIG_STM32H7_SERIAL_DISABLE_REORDERING=y
-CONFIG_STM32H7_SPI2=y
-CONFIG_STM32H7_SPI2_DMA=y
-CONFIG_STM32H7_SPI2_DMA_BUFFER=4096
-CONFIG_STM32H7_SPI_DMATHRESHOLD=8
-CONFIG_STM32H7_TIM1=y
-CONFIG_STM32H7_TIM3=y
-CONFIG_STM32H7_TIM4=y
-CONFIG_STM32H7_TIM8=y
-CONFIG_STM32H7_UART4=y
-CONFIG_STM32H7_UART7=y
-CONFIG_STM32H7_UART8=y
-CONFIG_STM32H7_USART1=y
-CONFIG_STM32H7_USART2=y
-CONFIG_STM32H7_USART3=y
-CONFIG_STM32H7_USART6=y
-CONFIG_STM32H7_USART_BREAKS=y
-CONFIG_STM32H7_USART_INVERT=y
-CONFIG_STM32H7_USART_SINGLEWIRE=y
-CONFIG_STM32H7_USART_SWAP=y
-CONFIG_SYSTEM_CDCACM=y
-CONFIG_SYSTEM_NSH=y
-CONFIG_TASK_NAME_SIZE=24
-CONFIG_UART4_BAUD=57600
-CONFIG_UART4_RXBUFSIZE=600
-CONFIG_UART4_TXBUFSIZE=1500
-CONFIG_UART7_BAUD=57600
-CONFIG_UART7_RXBUFSIZE=600
-CONFIG_UART7_TXBUFSIZE=1500
-CONFIG_UART8_BAUD=57600
-CONFIG_UART8_RXBUFSIZE=600
-CONFIG_UART8_TXBUFSIZE=1500
-CONFIG_USART1_BAUD=57600
-CONFIG_USART1_RXBUFSIZE=600
-CONFIG_USART1_TXBUFSIZE=1500
-CONFIG_USART2_BAUD=57600
-CONFIG_USART2_RXBUFSIZE=600
-CONFIG_USART2_TXBUFSIZE=1500
-CONFIG_USART3_BAUD=57600
-CONFIG_USART3_RXBUFSIZE=600
-CONFIG_USART3_TXBUFSIZE=1500
-CONFIG_USART6_BAUD=57600
-CONFIG_USART6_RXBUFSIZE=600
-CONFIG_USART6_TXBUFSIZE=1500
-CONFIG_USBDEV=y
-CONFIG_USBDEV_BUSPOWERED=y
-CONFIG_USBDEV_MAXPOWER=500
-CONFIG_USEC_PER_TICK=1000
-CONFIG_WATCHDOG=y

boards/corvon/743v1/nuttx-config/scripts/bootloader_script.ld

@@ -1,213 +0,0 @@
-/****************************************************************************
- * scripts/script.ld
- *
- *   Copyright (C) 2016, 2019 Gregory Nutt. All rights reserved.
- *   Author: Gregory Nutt <gnutt@nuttx.org>
- *
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- * 3. Neither the name NuttX nor the names of its contributors may be
- *    used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ****************************************************************************/
-
-/* The Durandal-v1 uses an STM32H743II has 2048Kb of main FLASH memory.
- * The flash memory is partitioned into a User Flash memory and a System
- * Flash memory. Each of these memories has two banks:
- *
- *   1) User Flash memory:
- *
- *      Bank 1: Start address 0x0800:0000 to 0x080F:FFFF with 8 sectors, 128Kb each
- *      Bank 2: Start address 0x0810:0000 to 0x081F:FFFF with 8 sectors, 128Kb each
- *
- *   2) System Flash memory:
- *
- *      Bank 1: Start address 0x1FF0:0000 to 0x1FF1:FFFF with 1 x 128Kb sector
- *      Bank 1: Start address 0x1FF4:0000 to 0x1FF5:FFFF with 1 x 128Kb sector
- *
- *   3) User option bytes for user configuration, only in Bank 1.
- *
- * In the STM32H743II, two different boot spaces can be selected through
- * the BOOT pin and the boot base address programmed in the BOOT_ADD0 and
- * BOOT_ADD1 option bytes:
- *
- *   1) BOOT=0: Boot address defined by user option byte BOOT_ADD0[15:0].
- *      ST programmed value: Flash memory at 0x0800:0000
- *   2) BOOT=1: Boot address defined by user option byte BOOT_ADD1[15:0].
- *      ST programmed value: System bootloader at 0x1FF0:0000
- *
- * The Durandal has a Switch on board, the BOOT0 pin is at ground so by default,
- * the STM32 will boot to address 0x0800:0000 in FLASH unless the swiutch is
- * drepresed, then the boot will be from 0x1FF0:0000
- *
- * The STM32H743ZI also has 1024Kb of data SRAM.
- * SRAM is split up into several blocks and into three power domains:
- *
- *   1) TCM SRAMs are dedicated to the Cortex-M7 and are accessible with
- *      0 wait states by the Cortex-M7 and by MDMA through AHBS slave bus
- *
- *      1.1) 128Kb of DTCM-RAM beginning at address 0x2000:0000
- *
- *           The DTCM-RAM is organized as 2 x 64Kb DTCM-RAMs on 2 x 32 bit
- *           DTCM ports. The DTCM-RAM could be used for critical real-time
- *           data, such as interrupt service routines or stack / heap memory.
- *           Both DTCM-RAMs can be used in parallel (for load/store operations)
- *           thanks to the Cortex-M7 dual issue capability.
- *
- *      1.2)  64Kb of ITCM-RAM beginning at address 0x0000:0000
- *
- *           This RAM is connected to ITCM 64-bit interface designed for
- *           execution of critical real-times routines by the CPU.
- *
- *   2) AXI SRAM (D1 domain) accessible by all system masters except BDMA
- *      through D1 domain AXI bus matrix
- *
- *      2.1) 512Kb of SRAM beginning at address 0x2400:0000
- *
- *   3) AHB SRAM (D2 domain) accessible by all system masters except BDMA
- *      through D2 domain AHB bus matrix
- *
- *      3.1) 128Kb of SRAM1 beginning at address 0x3000:0000
- *      3.2) 128Kb of SRAM2 beginning at address 0x3002:0000
- *      3.3)  32Kb of SRAM3 beginning at address 0x3004:0000
- *
- *      SRAM1 - SRAM3 are one contiguous block: 288Kb at address 0x3000:0000
- *
- *   4) AHB SRAM (D3 domain) accessible by most of system masters
- *      through D3 domain AHB bus matrix
- *
- *      4.1)  64Kb of SRAM4 beginning at address 0x3800:0000
- *      4.1)   4Kb of backup RAM beginning at address 0x3880:0000
- *
- * When booting from FLASH, FLASH memory is aliased to address 0x0000:0000
- * where the code expects to begin execution by jumping to the entry point in
- * the 0x0800:0000 address range.
- */
-
-MEMORY
-{
-	itcm  (rwx) : ORIGIN = 0x00000000, LENGTH =   64K
-	flash (rx)  : ORIGIN = 0x08000000, LENGTH = 2048K
-	dtcm1 (rwx) : ORIGIN = 0x20000000, LENGTH =   64K
-	dtcm2 (rwx) : ORIGIN = 0x20010000, LENGTH =   64K
-	sram  (rwx) : ORIGIN = 0x24000000, LENGTH =  512K
-	sram1 (rwx) : ORIGIN = 0x30000000, LENGTH =  128K
-	sram2 (rwx) : ORIGIN = 0x30020000, LENGTH =  128K
-	sram3 (rwx) : ORIGIN = 0x30040000, LENGTH =   32K
-	sram4 (rwx) : ORIGIN = 0x38000000, LENGTH =   64K
-	bbram (rwx) : ORIGIN = 0x38800000, LENGTH =    4K
-}
-
-OUTPUT_ARCH(arm)
-EXTERN(_vectors)
-ENTRY(_stext)
-
-/*
- * Ensure that abort() is present in the final object.  The exception handling
- * code pulled in by libgcc.a requires it (and that code cannot be easily avoided).
- */
-EXTERN(abort)
-EXTERN(_bootdelay_signature)
-
-SECTIONS
-{
-	.text : {
-		_stext = ABSOLUTE(.);
-		*(.vectors)
-		. = ALIGN(32);
-		/*
-		This signature provides the bootloader with a way to delay booting
-		*/
-		_bootdelay_signature = ABSOLUTE(.);
-		FILL(0xffecc2925d7d05c5)
-		. += 8;
-		*(.text .text.*)
-		*(.fixup)
-		*(.gnu.warning)
-		*(.rodata .rodata.*)
-		*(.gnu.linkonce.t.*)
-		*(.glue_7)
-		*(.glue_7t)
-		*(.got)
-		*(.gcc_except_table)
-		*(.gnu.linkonce.r.*)
-		_etext = ABSOLUTE(.);
-
-	} > flash
-
-	/*
-	 * Init functions (static constructors and the like)
-	 */
-	.init_section : {
-		_sinit = ABSOLUTE(.);
-		KEEP(*(.init_array .init_array.*))
-		_einit = ABSOLUTE(.);
-	} > flash
-
-
-	.ARM.extab : {
-		*(.ARM.extab*)
-	} > flash
-
-	__exidx_start = ABSOLUTE(.);
-	.ARM.exidx : {
-		*(.ARM.exidx*)
-	} > flash
-	__exidx_end = ABSOLUTE(.);
-
-	_eronly = ABSOLUTE(.);
-
-	.data : {
-		_sdata = ABSOLUTE(.);
-		*(.data .data.*)
-		*(.gnu.linkonce.d.*)
-		CONSTRUCTORS
-		_edata = ABSOLUTE(.);
-	} > sram AT > flash
-
-	.bss : {
-		_sbss = ABSOLUTE(.);
-		*(.bss .bss.*)
-		*(.gnu.linkonce.b.*)
-		*(COMMON)
-		. = ALIGN(4);
-		_ebss = ABSOLUTE(.);
-	} > sram
-
-	/* Stabs debugging sections. */
-	.stab 0 : { *(.stab) }
-	.stabstr 0 : { *(.stabstr) }
-	.stab.excl 0 : { *(.stab.excl) }
-	.stab.exclstr 0 : { *(.stab.exclstr) }
-	.stab.index 0 : { *(.stab.index) }
-	.stab.indexstr 0 : { *(.stab.indexstr) }
-	.comment 0 : { *(.comment) }
-	.debug_abbrev 0 : { *(.debug_abbrev) }
-	.debug_info 0 : { *(.debug_info) }
-	.debug_line 0 : { *(.debug_line) }
-	.debug_pubnames 0 : { *(.debug_pubnames) }
-	.debug_aranges 0 : { *(.debug_aranges) }
-}

boards/corvon/743v1/nuttx-config/scripts/script.ld

@@ -1,228 +0,0 @@
-/****************************************************************************
- * scripts/script.ld
- *
- *   Copyright (C) 2020 Gregory Nutt. All rights reserved.
- *   Author: Gregory Nutt <gnutt@nuttx.org>
- *
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- * 3. Neither the name NuttX nor the names of its contributors may be
- *    used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ****************************************************************************/
-
-/* The board uses an STM32H743II and has 2048Kb of main FLASH memory.
- * The flash memory is partitioned into a User Flash memory and a System
- * Flash memory. Each of these memories has two banks:
- *
- *   1) User Flash memory:
- *
- *      Bank 1: Start address 0x0800:0000 to 0x080F:FFFF with 8 sectors, 128Kb each
- *      Bank 2: Start address 0x0810:0000 to 0x081F:FFFF with 8 sectors, 128Kb each
- *
- *   2) System Flash memory:
- *
- *      Bank 1: Start address 0x1FF0:0000 to 0x1FF1:FFFF with 1 x 128Kb sector
- *      Bank 1: Start address 0x1FF4:0000 to 0x1FF5:FFFF with 1 x 128Kb sector
- *
- *   3) User option bytes for user configuration, only in Bank 1.
- *
- * In the STM32H743II, two different boot spaces can be selected through
- * the BOOT pin and the boot base address programmed in the BOOT_ADD0 and
- * BOOT_ADD1 option bytes:
- *
- *   1) BOOT=0: Boot address defined by user option byte BOOT_ADD0[15:0].
- *      ST programmed value: Flash memory at 0x0800:0000
- *   2) BOOT=1: Boot address defined by user option byte BOOT_ADD1[15:0].
- *      ST programmed value: System bootloader at 0x1FF0:0000
- *
- * There's a switch on board, the BOOT0 pin is at ground so by default,
- * the STM32 will boot to address 0x0800:0000 in FLASH unless the switch is
- * drepresed, then the boot will be from 0x1FF0:0000
- *
- * The STM32H743ZI also has 1024Kb of data SRAM.
- * SRAM is split up into several blocks and into three power domains:
- *
- *   1) TCM SRAMs are dedicated to the Cortex-M7 and are accessible with
- *      0 wait states by the Cortex-M7 and by MDMA through AHBS slave bus
- *
- *      1.1) 128Kb of DTCM-RAM beginning at address 0x2000:0000
- *
- *           The DTCM-RAM is organized as 2 x 64Kb DTCM-RAMs on 2 x 32 bit
- *           DTCM ports. The DTCM-RAM could be used for critical real-time
- *           data, such as interrupt service routines or stack / heap memory.
- *           Both DTCM-RAMs can be used in parallel (for load/store operations)
- *           thanks to the Cortex-M7 dual issue capability.
- *
- *      1.2)  64Kb of ITCM-RAM beginning at address 0x0000:0000
- *
- *           This RAM is connected to ITCM 64-bit interface designed for
- *           execution of critical real-times routines by the CPU.
- *
- *   2) AXI SRAM (D1 domain) accessible by all system masters except BDMA
- *      through D1 domain AXI bus matrix
- *
- *      2.1) 512Kb of SRAM beginning at address 0x2400:0000
- *
- *   3) AHB SRAM (D2 domain) accessible by all system masters except BDMA
- *      through D2 domain AHB bus matrix
- *
- *      3.1) 128Kb of SRAM1 beginning at address 0x3000:0000
- *      3.2) 128Kb of SRAM2 beginning at address 0x3002:0000
- *      3.3)  32Kb of SRAM3 beginning at address 0x3004:0000
- *
- *      SRAM1 - SRAM3 are one contiguous block: 288Kb at address 0x3000:0000
- *
- *   4) AHB SRAM (D3 domain) accessible by most of system masters
- *      through D3 domain AHB bus matrix
- *
- *      4.1)  64Kb of SRAM4 beginning at address 0x3800:0000
- *      4.1)   4Kb of backup RAM beginning at address 0x3880:0000
- *
- * When booting from FLASH, FLASH memory is aliased to address 0x0000:0000
- * where the code expects to begin execution by jumping to the entry point in
- * the 0x0800:0000 address range.
- */
-
-MEMORY
-{
-	ITCM_RAM  (rwx) : ORIGIN = 0x00000000, LENGTH =   64K
-	FLASH      (rx) : ORIGIN = 0x08020000, LENGTH = 1792K
-
-	DTCM1_RAM (rwx) : ORIGIN = 0x20000000, LENGTH =   64K
-	DTCM2_RAM (rwx) : ORIGIN = 0x20010000, LENGTH =   64K
-	AXI_SRAM  (rwx) : ORIGIN = 0x24000000, LENGTH =  512K /* D1 domain AXI bus */
-	SRAM1     (rwx) : ORIGIN = 0x30000000, LENGTH =  128K /* D2 domain AHB bus */
-	SRAM2     (rwx) : ORIGIN = 0x30020000, LENGTH =  128K /* D2 domain AHB bus */
-	SRAM3     (rwx) : ORIGIN = 0x30040000, LENGTH =   32K /* D2 domain AHB bus */
-	SRAM4     (rwx) : ORIGIN = 0x38000000, LENGTH =   64K /* D3 domain */
-	BKPRAM    (rwx) : ORIGIN = 0x38800000, LENGTH =    4K
-}
-
-OUTPUT_ARCH(arm)
-EXTERN(_vectors)
-ENTRY(_stext)
-
-/*
- * Ensure that abort() is present in the final object.  The exception handling
- * code pulled in by libgcc.a requires it (and that code cannot be easily avoided).
- */
-EXTERN(abort)
-EXTERN(_bootdelay_signature)
-
-SECTIONS
-{
-	.text : {
-		_stext = ABSOLUTE(.);
-		*(.vectors)
-		. = ALIGN(32);
-		/*
-		This signature provides the bootloader with a way to delay booting
-		*/
-		_bootdelay_signature = ABSOLUTE(.);
-		FILL(0xffecc2925d7d05c5)
-		. += 8;
-		*(.text .text.*)
-		*(.fixup)
-		*(.gnu.warning)
-		*(.rodata .rodata.*)
-		*(.gnu.linkonce.t.*)
-		*(.glue_7)
-		*(.glue_7t)
-		*(.got)
-		*(.gcc_except_table)
-		*(.gnu.linkonce.r.*)
-		_etext = ABSOLUTE(.);
-
-	} > FLASH
-
-	/*
-	 * Init functions (static constructors and the like)
-	 */
-	.init_section : {
-		_sinit = ABSOLUTE(.);
-		KEEP(*(.init_array .init_array.*))
-		_einit = ABSOLUTE(.);
-	} > FLASH
-
-
-	.ARM.extab : {
-		*(.ARM.extab*)
-	} > FLASH
-
-	__exidx_start = ABSOLUTE(.);
-	.ARM.exidx : {
-		*(.ARM.exidx*)
-	} > FLASH
-	__exidx_end = ABSOLUTE(.);
-
-	_eronly = ABSOLUTE(.);
-
-	.data : {
-		_sdata = ABSOLUTE(.);
-		*(.data .data.*)
-		*(.gnu.linkonce.d.*)
-		CONSTRUCTORS
-		_edata = ABSOLUTE(.);
-
-		/* Pad out last section as the STM32H7 Flash write size is 256 bits. 32 bytes */
-		. = ALIGN(16);
-		FILL(0xffff)
-		. += 16;
-	} > AXI_SRAM AT > FLASH  = 0xffff
-
-	.bss : {
-		_sbss = ABSOLUTE(.);
-		*(.bss .bss.*)
-		*(.gnu.linkonce.b.*)
-		*(COMMON)
-		. = ALIGN(4);
-		_ebss = ABSOLUTE(.);
-	} > AXI_SRAM
-
-	/* Emit the the D3 power domain section for locating BDMA data */
-
-	.sram4_reserve (NOLOAD) :
-	{
-		*(.sram4)
-		. = ALIGN(4);
-		_sram4_heap_start = ABSOLUTE(.);
-	} > SRAM4
-
-	/* Stabs debugging sections. */
-	.stab 0 : { *(.stab) }
-	.stabstr 0 : { *(.stabstr) }
-	.stab.excl 0 : { *(.stab.excl) }
-	.stab.exclstr 0 : { *(.stab.exclstr) }
-	.stab.index 0 : { *(.stab.index) }
-	.stab.indexstr 0 : { *(.stab.indexstr) }
-	.comment 0 : { *(.comment) }
-	.debug_abbrev 0 : { *(.debug_abbrev) }
-	.debug_info 0 : { *(.debug_info) }
-	.debug_line 0 : { *(.debug_line) }
-	.debug_pubnames 0 : { *(.debug_pubnames) }
-	.debug_aranges 0 : { *(.debug_aranges) }
-}

boards/corvon/743v1/src/CMakeLists.txt

@@ -1,68 +0,0 @@
-############################################################################
-#
-#   Copyright (c) 2021 PX4 Development Team. All rights reserved.
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions
-# are met:
-#
-# 1. Redistributions of source code must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-# 2. Redistributions in binary form must reproduce the above copyright
-#    notice, this list of conditions and the following disclaimer in
-#    the documentation and/or other materials provided with the
-#    distribution.
-# 3. Neither the name PX4 nor the names of its contributors may be
-#    used to endorse or promote products derived from this software
-#    without specific prior written permission.
-#
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
-# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
-# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
-# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
-# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
-# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
-# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
-# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-# POSSIBILITY OF SUCH DAMAGE.
-#
-############################################################################
-if("${PX4_BOARD_LABEL}" STREQUAL  "bootloader")
-	add_library(drivers_board
-		bootloader_main.c
-		usb.c
-	)
-	target_link_libraries(drivers_board
-		PRIVATE
-			nuttx_arch
-			nuttx_drivers
-			bootloader
-	)
-	target_include_directories(drivers_board PRIVATE ${PX4_SOURCE_DIR}/platforms/nuttx/src/bootloader/common)
-
-else()
-	add_library(drivers_board
-		i2c.cpp
-		init.c
-		led.c
-		sdio.c
-		spi.cpp
-		timer_config.cpp
-		usb.c
-	)
-	add_dependencies(drivers_board arch_board_hw_info)
-
-	target_link_libraries(drivers_board
-		PRIVATE
-			arch_io_pins
-			arch_spi
-			arch_board_hw_info
-			drivers__led
-			nuttx_arch
-			nuttx_drivers
-			px4_layer
-	)
-endif()

boards/corvon/743v1/src/board_config.h

@@ -1,197 +0,0 @@
-/****************************************************************************
- *
- *   Copyright (c) 2021 PX4 Development Team. All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- * 3. Neither the name PX4 nor the names of its contributors may be
- *    used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ****************************************************************************/
-
-/**
- * @file board_config.h
- *
- * Board internal definitions
- */
-
-#pragma once
-
-/****************************************************************************************************
- * Included Files
- ****************************************************************************************************/
-
-#include <px4_platform_common/px4_config.h>
-#include <nuttx/compiler.h>
-#include <stdint.h>
-
-#include <stm32_gpio.h>
-
-/****************************************************************************************************
- * Definitions
- ****************************************************************************************************/
-
-// #define FLASH_BASED_PARAMS
-
-
-/* LEDs are driven with push open drain to support Anode to 5V or 3.3V */
-
-#  define GPIO_nLED_RED         /* PE5   */  (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_50MHz|GPIO_OUTPUT_SET|GPIO_PORTE|GPIO_PIN5)
-#  define GPIO_nLED_GREEN       /* PE6   */  (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_50MHz|GPIO_OUTPUT_SET|GPIO_PORTE|GPIO_PIN6)
-#  define GPIO_nLED_BLUE        /* PE4   */  (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_50MHz|GPIO_OUTPUT_SET|GPIO_PORTE|GPIO_PIN4)
-
-#  define BOARD_HAS_CONTROL_STATUS_LEDS      1
-#  define BOARD_OVERLOAD_LED     LED_RED
-#  define BOARD_ARMED_STATE_LED  LED_BLUE
-
-
-/*
- * ADC channels
- *
- * These are the channel numbers of the ADCs of the microcontroller that
- * can be used by the Px4 Firmware in the adc driver
- */
-
-/* ADC defines to be used in sensors.cpp to read from a particular channel */
-#define SYSTEM_ADC_BASE STM32_ADC1_BASE
-#define ADC1_CH(n)                  (n)
-
-/* Define GPIO pins used as ADC N.B. Channel numbers must match below  */
-#define PX4_ADC_GPIO  \
-	/* PC0  */  GPIO_ADC123_INP10, \
-	/* PC1  */  GPIO_ADC123_INP11
-
-
-/* Define Channel numbers must match above GPIO pin IN(n)*/
-#define ADC_BATTERY_VOLTAGE_CHANNEL     /* PC0  */  ADC1_CH(10)
-#define ADC_BATTERY_CURRENT_CHANNEL     /* PC1  */  ADC1_CH(11)
-
-
-#define ADC_CHANNELS \
-	((1 << ADC_BATTERY_VOLTAGE_CHANNEL) | \
-	 (1 << ADC_BATTERY_CURRENT_CHANNEL))
-
-
-/* Define Battery 1 Voltage Divider and A per V
- */
-
-// #define BOARD_BATTERY1_V_DIV         (11.0f)     /* measured with the provided PM board */
-// #define BOARD_BATTERY1_A_PER_V       (40.0f)
-// #define BOARD_BATTERY2_V_DIV         (11.0f)     /* measured with the provided PM board */
-
-
-/* PWM
- */
-#define DIRECT_PWM_OUTPUT_CHANNELS   10
-#define DIRECT_INPUT_TIMER_CHANNELS  10
-
-#define BOARD_HAS_PWM  DIRECT_PWM_OUTPUT_CHANNELS
-
-
-/* USB OTG FS
- *
- * PA8  OTG_FS_VBUS VBUS sensing
- */
-
-#define GPIO_OTGFS_VBUS         /* PA8 */ (GPIO_INPUT|GPIO_PULLDOWN|GPIO_SPEED_100MHz|GPIO_PORTA|GPIO_PIN8)
-
-
-/* High-resolution timer */
-#define HRT_TIMER               2  /* use timer8 for the HRT */
-#define HRT_TIMER_CHANNEL       1  /* use capture/compare channel 3 */
-
-
-/* RC Serial port */
-#define RC_SERIAL_PORT          "/dev/ttyS4"
-#define BOARD_SUPPORTS_RC_SERIAL_PORT_OUTPUT
-
-/* SD Card */
-#define SDIO_SLOTNO             0  /* Only one slot */
-#define SDIO_MINOR              0
-
-/* This board provides a DMA pool and APIs */
-#define BOARD_DMA_ALLOC_POOL_SIZE 5120
-
-/* This board provides the board_on_reset interface */
-#define BOARD_HAS_ON_RESET 1
-
-#define PX4_GPIO_INIT_LIST { \
-		PX4_ADC_GPIO, \
-		GPIO_CAN1_TX, \
-		GPIO_CAN1_RX, \
-	}
-
-#define BOARD_ENABLE_CONSOLE_BUFFER
-
-#define FLASH_BASED_PARAMS
-
-#define BOARD_NUM_IO_TIMERS 4
-
-
-__BEGIN_DECLS
-
-/****************************************************************************************************
- * Public Types
- ****************************************************************************************************/
-
-/****************************************************************************************************
- * Public data
- ****************************************************************************************************/
-
-#ifndef __ASSEMBLY__
-
-/****************************************************************************************************
- * Public Functions
- ****************************************************************************************************/
-
-/****************************************************************************
- * Name: stm32_sdio_initialize
- *
- * Description:
- *   Initialize SDIO-based MMC/SD card support
- *
- ****************************************************************************/
-
-int stm32_sdio_initialize(void);
-
-/****************************************************************************************************
- * Name: stm32_spiinitialize
- *
- * Description:
- *   Called to configure SPI chip select GPIO pins for the board.
- *
- ****************************************************************************************************/
-
-extern void stm32_spiinitialize(void);
-
-extern void stm32_usbinitialize(void);
-
-extern void board_peripheral_reset(int ms);
-
-#include <px4_platform_common/board_common.h>
-
-#endif /* __ASSEMBLY__ */
-
-__END_DECLS

boards/corvon/743v1/src/bootloader_main.c

@@ -1,75 +0,0 @@
-/****************************************************************************
- *
- *   Copyright (c) 2021 PX4 Development Team. All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- * 3. Neither the name PX4 nor the names of its contributors may be
- *    used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ****************************************************************************/
-
-/**
- * @file bootloader_main.c
- *
- * FMU-specific early startup code for bootloader
-*/
-
-#include "board_config.h"
-#include "bl.h"
-
-#include <nuttx/config.h>
-#include <nuttx/board.h>
-#include <chip.h>
-#include <stm32_uart.h>
-#include <arch/board/board.h>
-#include "arm_internal.h"
-#include <px4_platform_common/init.h>
-
-extern int sercon_main(int c, char **argv);
-
-__EXPORT void board_on_reset(int status) {}
-
-__EXPORT void stm32_boardinitialize(void)
-{
-	/* configure USB interfaces */
-	stm32_usbinitialize();
-}
-
-__EXPORT int board_app_initialize(uintptr_t arg)
-{
-	return 0;
-}
-
-void board_late_initialize(void)
-{
-	sercon_main(0, NULL);
-}
-
-extern void sys_tick_handler(void);
-void board_timerhook(void)
-{
-	sys_tick_handler();
-}

boards/corvon/743v1/src/hw_config.h

@@ -1,135 +0,0 @@
-/****************************************************************************
- *
- *   Copyright (C) 2021 PX4 Development Team. All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- * 3. Neither the name PX4 nor the names of its contributors may be
- *    used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ****************************************************************************/
-
-#pragma once
-
-/****************************************************************************
- * 10-8--2016:
- *  To simplify the ripple effect on the tools, we will be using
- *  /dev/serial/by-id/<asterisk>PX4<asterisk> to locate PX4 devices. Therefore
- *  moving forward all Bootloaders must contain the prefix "PX4 BL "
- *  in the USBDEVICESTRING
- *  This Change will be made in an upcoming BL release
- ****************************************************************************/
-/*
- * Define usage to configure a bootloader
- *
- *
- * Constant                example          Usage
- * APP_LOAD_ADDRESS     0x08004000            - The address in Linker Script, where the app fw is org-ed
- * BOOTLOADER_DELAY     5000                  - Ms to wait while under USB pwr or bootloader request
- * BOARD_FMUV2
- * INTERFACE_USB        1                     - (Optional) Scan and use the USB interface for bootloading
- * INTERFACE_USART      1                     - (Optional) Scan and use the Serial interface for bootloading
- * USBDEVICESTRING      "PX4 BL FMU v2.x"     - USB id string
- * USBPRODUCTID         0x0011                - PID Should match defconfig
- * BOOT_DELAY_ADDRESS   0x000001a0            - (Optional) From the linker script from Linker Script to get a custom
- *                                               delay provided by an APP FW
- * BOARD_TYPE           9                     - Must match .prototype boad_id
- * _FLASH_KBYTES        (*(uint16_t *)0x1fff7a22) - Run time flash size detection
- * BOARD_FLASH_SECTORS  ((_FLASH_KBYTES == 0x400) ? 11 : 23) - Run time determine the physical last sector
- * BOARD_FLASH_SECTORS   11                   - Hard coded zero based last sector
- * BOARD_FLASH_SIZE     (_FLASH_KBYTES*1024)-   Total Flash size of device, determined at run time.
- *                         (1024 * 1024)      - Hard coded Total Flash of device - The bootloader and app reserved will be deducted
- *                                              programmatically
- *
- * BOARD_FIRST_FLASH_SECTOR_TO_ERASE  2        - Optional sectors index in the flash_sectors table  (F4 only), to begin erasing.
- *                                               This is to allow sectors to be reserved for app fw usage. That will NOT be erased
- *                                               during a FW upgrade.
- *                                               The default is 0, and selects the first sector to be erased, as the 0th entry in the
- *                                               flash_sectors table. Which is the second physical sector of FLASH in the device.
- *                                               The first physical sector of FLASH is used by the bootloader, and is not defined
- *                                               in the table.
- *
- * APP_RESERVATION_SIZE (BOARD_FIRST_FLASH_SECTOR_TO_ERASE * 16 * 1024) - Number of bytes reserved by the APP FW. This number plus
- *                                                                        BOOTLOADER_RESERVATION_SIZE  will be deducted from
- *                                                                        BOARD_FLASH_SIZE to determine the size of the App FW
- *                                                                        and hence the address space of FLASH to erase and program.
- * USBMFGSTRING            "PX4 AP"            - Optional USB MFG string (default is '3D Robotics' if not defined.)
- * SERIAL_BREAK_DETECT_DISABLED                -  Optional prevent break selection on Serial port from entering or staying in BL
- *
- * * Other defines are somewhat self explanatory.
- */
-
-/* Boot device selection list*/
-#define USB0_DEV       0x01
-#define SERIAL0_DEV    0x02
-#define SERIAL1_DEV    0x04
-
-#define APP_LOAD_ADDRESS               0x08020000
-#define BOOTLOADER_DELAY               5000
-#define INTERFACE_USB                  1
-#define INTERFACE_USB_CONFIG           "/dev/ttyACM0"
-#define BOARD_VBUS                     MK_GPIO_INPUT(GPIO_OTGFS_VBUS)
-
-//#define USE_VBUS_PULL_DOWN
-#define INTERFACE_USART                1
-#define INTERFACE_USART_CONFIG         "/dev/ttyS0,115200"
-#define BOOT_DELAY_ADDRESS             0x000001a0
-#define BOARD_TYPE                     1188
-#define BOARD_FLASH_SECTORS            (14)
-#define BOARD_FLASH_SIZE               (16 * 128 * 1024)
-#define APP_RESERVATION_SIZE 	       (1 * 128 * 1024)
-
-#define OSC_FREQ                       8
-
-#define BOARD_PIN_LED_ACTIVITY         GPIO_nLED_BLUE // BLUE
-#define BOARD_PIN_LED_BOOTLOADER       GPIO_nLED_GREEN // GREEN
-#define BOARD_LED_ON                   0
-#define BOARD_LED_OFF                  1
-
-#define SERIAL_BREAK_DETECT_DISABLED   1
-
-#if !defined(ARCH_SN_MAX_LENGTH)
-# define ARCH_SN_MAX_LENGTH 12
-#endif
-
-#if !defined(APP_RESERVATION_SIZE)
-#  define APP_RESERVATION_SIZE 0
-#endif
-
-#if !defined(BOARD_FIRST_FLASH_SECTOR_TO_ERASE)
-#  define BOARD_FIRST_FLASH_SECTOR_TO_ERASE 1
-#endif
-
-#if !defined(USB_DATA_ALIGN)
-# define USB_DATA_ALIGN
-#endif
-
-#ifndef BOOT_DEVICES_SELECTION
-#  define BOOT_DEVICES_SELECTION USB0_DEV|SERIAL0_DEV|SERIAL1_DEV
-#endif
-
-#ifndef BOOT_DEVICES_FILTER_ONUSB
-#  define BOOT_DEVICES_FILTER_ONUSB USB0_DEV|SERIAL0_DEV|SERIAL1_DEV
-#endif

boards/corvon/743v1/src/i2c.cpp

@@ -1,39 +0,0 @@
-/****************************************************************************
- *
- *   Copyright (C) 2021 PX4 Development Team. All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- * 3. Neither the name PX4 nor the names of its contributors may be
- *    used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ****************************************************************************/
-
-#include <px4_arch/i2c_hw_description.h>
-
-constexpr px4_i2c_bus_t px4_i2c_buses[I2C_BUS_MAX_BUS_ITEMS] = {
-	initI2CBusExternal(1),
-	initI2CBusInternal(2),
-};

boards/corvon/743v1/src/init.c

@@ -1,208 +0,0 @@
-/****************************************************************************
- *
- *   Copyright (c) 2021 PX4 Development Team. All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- * 3. Neither the name PX4 nor the names of its contributors may be
- *    used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ****************************************************************************/
-
-/**
- * @file init.c
- *
- * FMU-specific early startup code. This file implements the
- * board_app_initialize() function that is called early by nsh during startup.
- *
- * Code here is run before the rcS script is invoked; it should start required
- * subsystems and perform board-specific initialisation.
- */
-
-#include "board_config.h"
-
-#include <syslog.h>
-
-#include <nuttx/config.h>
-#include <nuttx/board.h>
-#include <nuttx/sdio.h>
-#include <nuttx/mmcsd.h>
-#include <arch/board/board.h>
-#include "arm_internal.h"
-
-#include <drivers/drv_hrt.h>
-#include <drivers/drv_board_led.h>
-#include <systemlib/px4_macros.h>
-#include <px4_arch/io_timer.h>
-#include <px4_platform_common/init.h>
-#include <px4_platform/gpio.h>
-#include <px4_platform/board_dma_alloc.h>
-
-# if defined(FLASH_BASED_PARAMS)
-#  include <parameters/flashparams/flashfs.h>
-#endif
-
-__BEGIN_DECLS
-extern void led_init(void);
-extern void led_on(int led);
-extern void led_off(int led);
-__END_DECLS
-
-/************************************************************************************
- * Name: board_peripheral_reset
- *
- * Description:
- *
- ************************************************************************************/
-__EXPORT void board_peripheral_reset(int ms)
-{
-	UNUSED(ms);
-}
-
-/************************************************************************************
- * Name: board_on_reset
- *
- * Description:
- * Optionally provided function called on entry to board_system_reset
- * It should perform any house keeping prior to the rest.
- *
- * status - 1 if resetting to boot loader
- *          0 if just resetting
- *
- ************************************************************************************/
-__EXPORT void board_on_reset(int status)
-{
-	for (int i = 0; i < DIRECT_PWM_OUTPUT_CHANNELS; ++i) {
-		px4_arch_configgpio(PX4_MAKE_GPIO_INPUT(io_timer_channel_get_as_pwm_input(i)));
-	}
-
-	/*
-	 * On resets invoked from system (not boot) ensure we establish a low
-	 * output state on PWM pins to disarm the ESC and prevent the reset from potentially
-	 * spinning up the motors.
-	 */
-	if (status >= 0) {
-		up_mdelay(100);
-	}
-}
-
-/************************************************************************************
- * Name: stm32_boardinitialize
- *
- * Description:
- *   All STM32 architectures must provide the following entry point.  This entry point
- *   is called early in the initialization -- after all memory has been configured
- *   and mapped but before any devices have been initialized.
- *
- ************************************************************************************/
-__EXPORT void stm32_boardinitialize(void)
-{
-	/* Reset PWM first thing */
-	board_on_reset(-1);
-
-	/* configure LEDs */
-	board_autoled_initialize();
-
-	/* configure pins */
-	const uint32_t gpio[] = PX4_GPIO_INIT_LIST;
-	px4_gpio_init(gpio, arraySize(gpio));
-
-	/* configure SPI interfaces */
-	stm32_spiinitialize();
-
-	/* configure USB interfaces */
-	stm32_usbinitialize();
-
-}
-
-/****************************************************************************
- * Name: board_app_initialize
- *
- * Description:
- *   Perform application specific initialization.  This function is never
- *   called directly from application code, but only indirectly via the
- *   (non-standard) boardctl() interface using the command BOARDIOC_INIT.
- *
- * Input Parameters:
- *   arg - The boardctl() argument is passed to the board_app_initialize()
- *         implementation without modification.  The argument has no
- *         meaning to NuttX;
- *
- * Returned Value:
- *   Zero (OK) is returned on success; a negated errno value is returned on
- *   any failure to indicate the nature of the failure.
- *
- ****************************************************************************/
-__EXPORT int board_app_initialize(uintptr_t arg)
-{
-	/* Need hrt running before using the ADC */
-	px4_platform_init();
-
-	/* configure the DMA allocator */
-	if (board_dma_alloc_init() < 0) {
-		syslog(LOG_ERR, "[boot] DMA alloc FAILED\n");
-	}
-
-	/* initial LED state */
-	drv_led_start();
-	led_off(LED_RED);
-	led_off(LED_BLUE);
-
-	if (board_hardfault_init(2, true) != 0) {
-		led_on(LED_BLUE);
-	}
-
-#ifdef CONFIG_MMCSD
-	int ret = stm32_sdio_initialize();
-
-	if (ret != OK) {
-		led_on(LED_BLUE);
-		return ret;
-	}
-
-#endif
-
-// TODO：internal flash store parameters
-#if defined(FLASH_BASED_PARAMS)
-	static sector_descriptor_t params_sector_map[] = {
-		{15, 128 * 1024, 0x081E0000},
-		{0, 0, 0},
-	};
-
-	/* Initialize the flashfs layer to use heap allocated memory */
-	int result = parameter_flashfs_init(params_sector_map, NULL, 0);
-
-	if (result != OK) {
-		syslog(LOG_ERR, "[boot] FAILED to init params in FLASH %d\n", result);
-		led_on(LED_RED);
-	}
-
-#endif
-
-	/* Configure the HW based on the manifest */
-	px4_platform_configure();
-
-	return OK;
-}

boards/corvon/743v1/src/led.c

@@ -1,114 +0,0 @@
-/****************************************************************************
- *
- *   Copyright (c) 2021 PX4 Development Team. All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- * 3. Neither the name PX4 nor the names of its contributors may be
- *    used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ****************************************************************************/
-
-/**
- * @file led.c
- *
- * LED backend.
- */
-
-#include <px4_platform_common/px4_config.h>
-
-#include <stdbool.h>
-
-#include "chip.h"
-#include "stm32_gpio.h"
-#include "board_config.h"
-
-#include <nuttx/board.h>
-#include <arch/board/board.h>
-
-/*
- * Ideally we'd be able to get these from arm_internal.h,
- * but since we want to be able to disable the NuttX use
- * of leds for system indication at will and there is no
- * separate switch, we need to build independent of the
- * CONFIG_ARCH_LEDS configuration switch.
- */
-__BEGIN_DECLS
-extern void led_init(void);
-extern void led_on(int led);
-extern void led_off(int led);
-extern void led_toggle(int led);
-__END_DECLS
-
-#  define xlat(p) (p)
-static uint32_t g_ledmap[] = {
-	GPIO_nLED_GREEN,   // Indexed by BOARD_LED_GREEN
-	GPIO_nLED_BLUE,    // Indexed by BOARD_LED_BLUE
-	GPIO_nLED_RED,     // Indexed by BOARD_LED_RED
-};
-
-__EXPORT void led_init(void)
-{
-	/* Configure LED GPIOs for output */
-	for (size_t l = 0; l < (sizeof(g_ledmap) / sizeof(g_ledmap[0])); l++) {
-		if (g_ledmap[l] != 0) {
-			stm32_configgpio(g_ledmap[l]);
-		}
-	}
-}
-
-static void phy_set_led(int led, bool state)
-{
-	/* Drive Low to switch on */
-	if (g_ledmap[led] != 0) {
-		stm32_gpiowrite(g_ledmap[led], !state);
-	}
-}
-
-static bool phy_get_led(int led)
-{
-	/* If Low it is on */
-	if (g_ledmap[led] != 0) {
-		return !stm32_gpioread(g_ledmap[led]);
-	}
-
-	return false;
-}
-
-
-__EXPORT void led_on(int led)
-{
-	phy_set_led(xlat(led), true);
-}
-
-__EXPORT void led_off(int led)
-{
-	phy_set_led(xlat(led), false);
-}
-
-__EXPORT void led_toggle(int led)
-{
-	phy_set_led(xlat(led), !phy_get_led(xlat(led)));
-}

boards/corvon/743v1/src/sdio.c

@@ -1,177 +0,0 @@
-/****************************************************************************
- *
- *   Copyright (C) 2014, 2016 Gregory Nutt. All rights reserved.
- *   Author: Gregory Nutt <gnutt@nuttx.org>
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- * 3. Neither the name NuttX nor the names of its contributors may be
- *    used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ****************************************************************************/
-
-/****************************************************************************
- * Included Files
- ****************************************************************************/
-
-#include <nuttx/config.h>
-#include <board_config.h>
-
-#include <stdbool.h>
-#include <stdio.h>
-#include <debug.h>
-#include <errno.h>
-
-#include <nuttx/sdio.h>
-#include <nuttx/mmcsd.h>
-
-#include "chip.h"
-#include "board_config.h"
-#include "stm32_gpio.h"
-#include "stm32_sdmmc.h"
-
-#ifdef CONFIG_MMCSD
-
-
-/****************************************************************************
- * Pre-processor Definitions
- ****************************************************************************/
-
-/* Card detections requires card support and a card detection GPIO */
-
-#define HAVE_NCD   1
-#if !defined(GPIO_SDMMC1_NCD)
-#  undef HAVE_NCD
-#endif
-
-/****************************************************************************
- * Private Data
- ****************************************************************************/
-
-static FAR struct sdio_dev_s *sdio_dev;
-#ifdef HAVE_NCD
-static bool g_sd_inserted = 0xff; /* Impossible value */
-#endif
-
-/****************************************************************************
- * Private Functions
- ****************************************************************************/
-
-/****************************************************************************
- * Name: stm32_ncd_interrupt
- *
- * Description:
- *   Card detect interrupt handler.
- *
- ****************************************************************************/
-
-#ifdef HAVE_NCD
-static int stm32_ncd_interrupt(int irq, FAR void *context)
-{
-	bool present;
-
-	present = !stm32_gpioread(GPIO_SDMMC1_NCD);
-
-	if (sdio_dev && present != g_sd_inserted) {
-		sdio_mediachange(sdio_dev, present);
-		g_sd_inserted = present;
-	}
-
-	return OK;
-}
-#endif
-
-/****************************************************************************
- * Public Functions
- ****************************************************************************/
-
-/****************************************************************************
- * Name: stm32_sdio_initialize
- *
- * Description:
- *   Initialize SDIO-based MMC/SD card support
- *
- ****************************************************************************/
-
-int stm32_sdio_initialize(void)
-{
-	int ret;
-
-#ifdef HAVE_NCD
-	/* Card detect */
-
-	bool cd_status;
-
-	/* Configure the card detect GPIO */
-
-	stm32_configgpio(GPIO_SDMMC1_NCD);
-
-	/* Register an interrupt handler for the card detect pin */
-
-	stm32_gpiosetevent(GPIO_SDMMC1_NCD, true, true, true, stm32_ncd_interrupt);
-#endif
-
-	/* Mount the SDIO-based MMC/SD block driver */
-	/* First, get an instance of the SDIO interface */
-
-	finfo("Initializing SDIO slot %d\n", SDIO_SLOTNO);
-
-	sdio_dev = sdio_initialize(SDIO_SLOTNO);
-
-	if (!sdio_dev) {
-		syslog(LOG_ERR, "[boot] Failed to initialize SDIO slot %d\n", SDIO_SLOTNO);
-		return -ENODEV;
-	}
-
-	/* Now bind the SDIO interface to the MMC/SD driver */
-
-	finfo("Bind SDIO to the MMC/SD driver, minor=%d\n", SDIO_MINOR);
-
-	ret = mmcsd_slotinitialize(SDIO_MINOR, sdio_dev);
-
-	if (ret != OK) {
-		syslog(LOG_ERR, "[boot] Failed to bind SDIO to the MMC/SD driver: %d\n", ret);
-		return ret;
-	}
-
-	finfo("Successfully bound SDIO to the MMC/SD driver\n");
-
-#ifdef HAVE_NCD
-	/* Use SD card detect pin to check if a card is g_sd_inserted */
-
-	cd_status = !stm32_gpioread(GPIO_SDMMC1_NCD);
-	finfo("Card detect : %d\n", cd_status);
-
-	sdio_mediachange(sdio_dev, cd_status);
-#else
-	/* Assume that the SD card is inserted.  What choice do we have? */
-
-	sdio_mediachange(sdio_dev, true);
-#endif
-
-	return OK;
-}
-
-#endif /* CONFIG_MMCSD */

boards/corvon/743v1/src/spi.cpp

@@ -1,47 +0,0 @@
-/****************************************************************************
- *
- *   Copyright (C) 2021 PX4 Development Team. All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- * 3. Neither the name PX4 nor the names of its contributors may be
- *    used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ****************************************************************************/
-
-#include <px4_arch/spi_hw_description.h>
-#include <drivers/drv_sensor.h>
-#include <nuttx/spi/spi.h>
-
-
-constexpr px4_spi_bus_t px4_spi_buses[SPI_BUS_MAX_BUS_ITEMS] = {
-	initSPIBus(SPI::Bus::SPI2, {
-		initSPIDevice(DRV_GYR_DEVTYPE_BMI088, SPI::CS{GPIO::PortD, GPIO::Pin5}),
-		initSPIDevice(DRV_ACC_DEVTYPE_BMI088, SPI::CS{GPIO::PortD, GPIO::Pin4}),
-		initSPIDevice(DRV_IMU_DEVTYPE_BMI270, SPI::CS{GPIO::PortA, GPIO::Pin15}),
-	}),
-};
-
-static constexpr bool unused = validateSPIConfig(px4_spi_buses);

boards/corvon/743v1/src/timer_config.cpp

@@ -1,56 +0,0 @@
-/****************************************************************************
- *
- *   Copyright (C) 2021 PX4 Development Team. All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- * 3. Neither the name PX4 nor the names of its contributors may be
- *    used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ****************************************************************************/
-
-#include <px4_arch/io_timer_hw_description.h>
-
-constexpr io_timers_t io_timers[MAX_IO_TIMERS] = {
-	initIOTimer(Timer::Timer1, DMA{DMA::Index1}),
-	initIOTimer(Timer::Timer3, DMA{DMA::Index1}),
-	initIOTimer(Timer::Timer4, DMA{DMA::Index1}),
-};
-
-constexpr timer_io_channels_t timer_io_channels[MAX_TIMER_IO_CHANNELS] = {
-	initIOTimerChannel(io_timers, {Timer::Timer1, Timer::Channel4}, {GPIO::PortE, GPIO::Pin14}),
-	initIOTimerChannel(io_timers, {Timer::Timer1, Timer::Channel3}, {GPIO::PortE, GPIO::Pin13}),
-	initIOTimerChannel(io_timers, {Timer::Timer1, Timer::Channel2}, {GPIO::PortE, GPIO::Pin11}),
-	initIOTimerChannel(io_timers, {Timer::Timer1, Timer::Channel1}, {GPIO::PortE, GPIO::Pin9}),
-	initIOTimerChannel(io_timers, {Timer::Timer3, Timer::Channel4}, {GPIO::PortB, GPIO::Pin1}),
-	initIOTimerChannel(io_timers, {Timer::Timer3, Timer::Channel3}, {GPIO::PortB, GPIO::Pin0}),
-	initIOTimerChannel(io_timers, {Timer::Timer4, Timer::Channel1}, {GPIO::PortD, GPIO::Pin12}),
-	initIOTimerChannel(io_timers, {Timer::Timer4, Timer::Channel2}, {GPIO::PortD, GPIO::Pin13}),
-	initIOTimerChannel(io_timers, {Timer::Timer4, Timer::Channel3}, {GPIO::PortD, GPIO::Pin14}),
-	initIOTimerChannel(io_timers, {Timer::Timer4, Timer::Channel4}, {GPIO::PortD, GPIO::Pin15}),
-};
-
-constexpr io_timers_channel_mapping_t io_timers_channel_mapping =
-	initIOTimerChannelMapping(io_timers, timer_io_channels);

boards/corvon/743v1/src/usb.c

@@ -1,78 +0,0 @@
-/****************************************************************************
- *
- *   Copyright (C) 2021 PX4 Development Team. All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- * 3. Neither the name PX4 nor the names of its contributors may be
- *    used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ****************************************************************************/
-
-/**
- * @file usb.c
- *
- * Board-specific USB functions.
- */
-
-#include "board_config.h"
-#include <nuttx/usb/usbdev.h>
-#include <nuttx/usb/usbdev_trace.h>
-#include <stm32_otg.h>
-#include <debug.h>
-
-/************************************************************************************
- * Name: stm32_usbinitialize
- *
- * Description:
- *   Called to setup USB-related GPIO pins for the board.
- *
- ************************************************************************************/
-
-__EXPORT void stm32_usbinitialize(void)
-{
-	/* The OTG FS has an internal soft pull-up */
-
-	/* Configure the OTG FS VBUS sensing GPIO, Power On, and Overcurrent GPIOs */
-
-#ifdef CONFIG_STM32H7_OTGFS
-	stm32_configgpio(GPIO_OTGFS_VBUS);
-#endif
-}
-
-/************************************************************************************
- * Name:  stm32_usbsuspend
- *
- * Description:
- *   Board logic must provide the stm32_usbsuspend logic if the USBDEV driver is
- *   used.  This function is called whenever the USB enters or leaves suspend mode.
- *   This is an opportunity for the board logic to shutdown clocks, power, etc.
- *   while the USB is suspended.
- *
- ************************************************************************************/
-__EXPORT void stm32_usbsuspend(FAR struct usbdev_s *dev, bool resume)
-{
-	uinfo("resume: %d\n", resume);
-}

boards/cuav/7-nano/default.px4board

@@ -20,7 +20,6 @@ CONFIG_DRIVERS_GPS=y
 CONFIG_DRIVERS_IMU_BOSCH_BMI088=y
 CONFIG_DRIVERS_IMU_INVENSENSE_ICM20948=y
 CONFIG_DRIVERS_IMU_INVENSENSE_IIM42652=y
-CONFIG_DRIVERS_IMU_INVENSENSE_IIM42653=y
 CONFIG_COMMON_INS=y
 CONFIG_COMMON_LIGHT=y
 CONFIG_COMMON_MAGNETOMETER=y

boards/cuav/7-nano/init/rc.board_sensors

@@ -12,17 +12,10 @@ else
 fi
 
 iim42652 -s -R 22 start
-
 bmi088 -A -R 29 -s start
-if ! bmi088 -G -R 29 -s start
-then
-	iim42653 -s -b 2 -R 22 start
-fi
+bmi088 -G -R 29 -s start
 
-if ! ist8310 -I -R 18 start
-then
-	iis2mdc -I -R 37 start
-fi
+ist8310 -I -R 18 start
 
 bmp581 -s start
 icp201xx -I start

boards/cuav/7-nano/src/spi.cpp

@@ -42,7 +42,6 @@ constexpr px4_spi_bus_t px4_spi_buses[SPI_BUS_MAX_BUS_ITEMS] = {
 	initSPIBus(SPI::Bus::SPI2, {
 		initSPIDevice(DRV_GYR_DEVTYPE_BMI088, SPI::CS{GPIO::PortG, GPIO::Pin2}, SPI::DRDY{GPIO::PortG, GPIO::Pin3}),
 		initSPIDevice(DRV_ACC_DEVTYPE_BMI088, SPI::CS{GPIO::PortH, GPIO::Pin5}, SPI::DRDY{GPIO::PortA, GPIO::Pin10}),
-		initSPIDevice(DRV_IMU_DEVTYPE_IIM42653, SPI::CS{GPIO::PortD, GPIO::Pin12}, SPI::DRDY{GPIO::PortA, GPIO::Pin10}),
 	}, {GPIO::PortI, GPIO::Pin11}),
 	// initSPIBus(SPI::Bus::SPI3,{
 	// 	// no devices

boards/hkust/nxt-dual/default.px4board

@@ -17,7 +17,6 @@ CONFIG_COMMON_DIFFERENTIAL_PRESSURE=y
 CONFIG_COMMON_DISTANCE_SENSOR=y
 CONFIG_DRIVERS_DSHOT=y
 CONFIG_DRIVERS_GPS=y
-CONFIG_DRIVERS_OSD_MSP_OSD=y
 CONFIG_DRIVERS_IMU_BOSCH_BMI088=y
 CONFIG_DRIVERS_IRLOCK=y
 CONFIG_COMMON_LIGHT=y

boards/holybro/kakuteh7-wing/bootloader.px4board

@@ -1,3 +0,0 @@
-CONFIG_BOARD_TOOLCHAIN="arm-none-eabi"
-CONFIG_BOARD_ARCHITECTURE="cortex-m7"
-CONFIG_BOARD_ROMFSROOT=""

boards/holybro/kakuteh7-wing/default.px4board

@@ -1,77 +0,0 @@
-CONFIG_BOARD_TOOLCHAIN="arm-none-eabi"
-CONFIG_BOARD_ARCHITECTURE="cortex-m7"
-CONFIG_BOARD_SERIAL_GPS1="/dev/ttyS0"
-CONFIG_BOARD_SERIAL_GPS2="/dev/ttyS1"
-CONFIG_BOARD_SERIAL_TEL1="/dev/ttyS2"
-CONFIG_BOARD_SERIAL_TEL2="/dev/ttyS3"
-CONFIG_BOARD_SERIAL_TEL3="/dev/ttyS5"
-CONFIG_BOARD_SERIAL_RC="/dev/ttyS4"
-CONFIG_BOARD_CONSTRAINED_FLASH=y
-CONFIG_DRIVERS_ADC_BOARD_ADC=y
-CONFIG_DRIVERS_BAROMETER_BMP280=y
-CONFIG_DRIVERS_BAROMETER_GOERTEK_SPA06=y
-CONFIG_DRIVERS_BATT_SMBUS=y
-CONFIG_DRIVERS_CDCACM_AUTOSTART=y
-CONFIG_COMMON_DIFFERENTIAL_PRESSURE=y
-CONFIG_COMMON_DISTANCE_SENSOR=y
-CONFIG_DRIVERS_DSHOT=y
-CONFIG_DRIVERS_GPS=y
-CONFIG_DRIVERS_IMU_INVENSENSE_ICM42688P=y
-CONFIG_DRIVERS_OSD_ATXXXX=y
-CONFIG_COMMON_LIGHT=y
-CONFIG_COMMON_MAGNETOMETER=y
-CONFIG_DRIVERS_PWM_OUT=y
-CONFIG_DRIVERS_RC_INPUT=y
-CONFIG_COMMON_TELEMETRY=y
-CONFIG_DRIVERS_TONE_ALARM=y
-CONFIG_DRIVERS_UAVCAN=y
-CONFIG_BOARD_UAVCAN_TIMER_OVERRIDE=7
-CONFIG_MODULES_AIRSPEED_SELECTOR=y
-CONFIG_MODULES_BATTERY_STATUS=y
-CONFIG_MODULES_COMMANDER=y
-CONFIG_MODULES_CONTROL_ALLOCATOR=y
-CONFIG_MODULES_DATAMAN=y
-CONFIG_MODULES_EKF2=y
-CONFIG_MODULES_ESC_BATTERY=y
-CONFIG_MODULES_EVENTS=y
-CONFIG_MODULES_FLIGHT_MODE_MANAGER=y
-CONFIG_MODULES_FW_ATT_CONTROL=y
-CONFIG_MODULES_FW_AUTOTUNE_ATTITUDE_CONTROL=y
-CONFIG_MODULES_FW_POS_CONTROL=y
-CONFIG_MODULES_FW_RATE_CONTROL=y
-CONFIG_MODULES_GIMBAL=y
-CONFIG_MODULES_GYRO_CALIBRATION=y
-CONFIG_MODULES_GYRO_FFT=y
-CONFIG_MODULES_LAND_DETECTOR=y
-CONFIG_MODULES_LANDING_TARGET_ESTIMATOR=y
-CONFIG_MODULES_LOAD_MON=y
-CONFIG_MODULES_LOGGER=y
-CONFIG_MODULES_MAG_BIAS_ESTIMATOR=y
-CONFIG_MODULES_MANUAL_CONTROL=y
-CONFIG_MODULES_MAVLINK=y
-CONFIG_MODULES_MC_ATT_CONTROL=y
-CONFIG_MODULES_MC_AUTOTUNE_ATTITUDE_CONTROL=y
-CONFIG_MODULES_MC_HOVER_THRUST_ESTIMATOR=y
-CONFIG_MODULES_MC_POS_CONTROL=y
-CONFIG_MODULES_MC_RATE_CONTROL=y
-CONFIG_MODULES_NAVIGATOR=y
-CONFIG_NUM_MISSION_ITMES_SUPPORTED=1000
-CONFIG_MODULES_RC_UPDATE=y
-CONFIG_MODULES_SENSORS=y
-CONFIG_MODULES_VTOL_ATT_CONTROL=y
-CONFIG_SYSTEMCMDS_BSONDUMP=y
-CONFIG_SYSTEMCMDS_DMESG=y
-CONFIG_SYSTEMCMDS_HARDFAULT_LOG=y
-CONFIG_SYSTEMCMDS_MFT=y
-CONFIG_SYSTEMCMDS_NSHTERM=y
-CONFIG_SYSTEMCMDS_PARAM=y
-CONFIG_SYSTEMCMDS_REBOOT=y
-CONFIG_SYSTEMCMDS_SD_BENCH=y
-CONFIG_SYSTEMCMDS_SYSTEM_TIME=y
-CONFIG_SYSTEMCMDS_TOP=y
-CONFIG_SYSTEMCMDS_TOPIC_LISTENER=y
-CONFIG_SYSTEMCMDS_TUNE_CONTROL=y
-CONFIG_SYSTEMCMDS_UORB=y
-CONFIG_SYSTEMCMDS_USB_CONNECTED=y
-CONFIG_SYSTEMCMDS_VER=y
-CONFIG_SYSTEMCMDS_WORK_QUEUE=y

boards/holybro/kakuteh7-wing/firmware.prototype

@@ -1,13 +0,0 @@
-{
-    "board_id": 1105,
-    "magic": "PX4FWv1",
-    "description": "Firmware for the Holybro KakuteH7-Wing board",
-    "image": "",
-    "build_time": 0,
-    "summary": "KAKUTEH7-WING",
-    "version": "0.1",
-    "image_size": 0,
-    "image_maxsize": 1703936,
-    "git_identity": "",
-    "board_revision": 0
-}

boards/holybro/kakuteh7-wing/init/rc.board_defaults

@@ -1,13 +0,0 @@
-#!/bin/sh
-#
-# board specific defaults
-#------------------------------------------------------------------------------
-
-
-param set-default BAT1_V_DIV 18.1
-param set-default BAT2_V_DIV 18.1
-
-param set-default BAT1_A_PER_V 36.367515152
-param set-default BAT2_A_PER_V 36.367515152
-
-param set-default OSD_ATXXXX_CFG 1

boards/holybro/kakuteh7-wing/init/rc.board_sensors

@@ -1,20 +0,0 @@
-#!/bin/sh
-#
-# PX4 FMUv6C specific board sensors init
-#------------------------------------------------------------------------------
-board_adc start
-
-# Internal SPI bus ICM42688p
-icm42688p -R 2 -s start
-
-# Internal baro
-if ! bmp280 -I -b 4 -q start
-then
-	spa06 -I -b 4 start
-fi
-
-# MAX7456 OSD
-if ! param compare OSD_ATXXXX_CFG 0
-then
-	atxxxx start -s
-fi

boards/holybro/kakuteh7-wing/nuttx-config/Kconfig

@@ -1,17 +0,0 @@
-#
-# For a description of the syntax of this configuration file,
-# see misc/tools/kconfig-language.txt.
-#
-config BOARD_HAS_PROBES
-	bool "Board provides GPIO or other Hardware for signaling to timing analyze."
-	default y
-	---help---
-		This board provides GPIO FMU-CH1-5, CAP1-6 as PROBE_1-11 to provide timing signals from selected drivers.
-
-config BOARD_USE_PROBES
-	bool "Enable the use the board provided FMU-CH1-5, CAP1-6 as PROBE_1-11"
-	default n
-	depends on BOARD_HAS_PROBES
-
-	---help---
-		Select to use GPIO FMU-CH1-5, CAP1-6  to provide timing signals from selected drivers.

boards/holybro/kakuteh7-wing/nuttx-config/bootloader/defconfig

@@ -1,91 +0,0 @@
-#
-# This file is autogenerated: PLEASE DO NOT EDIT IT.
-#
-# You can use "make menuconfig" to make any modifications to the installed .config file.
-# You can then do "make savedefconfig" to generate a new defconfig file that includes your
-# modifications.
-#
-# CONFIG_DEV_CONSOLE is not set
-# CONFIG_DISABLE_PSEUDOFS_OPERATIONS is not set
-# CONFIG_SPI_EXCHANGE is not set
-# CONFIG_STM32H7_SYSCFG is not set
-CONFIG_ARCH="arm"
-CONFIG_ARCH_BOARD_CUSTOM=y
-CONFIG_ARCH_BOARD_CUSTOM_DIR="../../../../boards/holybro/kakuteh7-wing/nuttx-config"
-CONFIG_ARCH_BOARD_CUSTOM_DIR_RELPATH=y
-CONFIG_ARCH_BOARD_CUSTOM_NAME="px4"
-CONFIG_ARCH_CHIP="stm32h7"
-CONFIG_ARCH_CHIP_STM32H743VI=y
-CONFIG_ARCH_CHIP_STM32H7=y
-CONFIG_ARCH_INTERRUPTSTACK=512
-CONFIG_ARMV7M_BASEPRI_WAR=y
-CONFIG_ARMV7M_ICACHE=y
-CONFIG_ARMV7M_MEMCPY=y
-CONFIG_ARMV7M_USEBASEPRI=y
-CONFIG_BOARDCTL=y
-CONFIG_BOARDCTL_RESET=y
-CONFIG_BOARD_ASSERT_RESET_VALUE=0
-CONFIG_BOARD_INITTHREAD_PRIORITY=254
-CONFIG_BOARD_LATE_INITIALIZE=y
-CONFIG_BOARD_LOOPSPERMSEC=95150
-CONFIG_BOARD_RESET_ON_ASSERT=2
-CONFIG_CDCACM=y
-CONFIG_CDCACM_IFLOWCONTROL=y
-CONFIG_CDCACM_PRODUCTID=0x0050
-CONFIG_CDCACM_PRODUCTSTR="PX4 BL KakuteH7-Wing"
-CONFIG_CDCACM_RXBUFSIZE=600
-CONFIG_CDCACM_TXBUFSIZE=12000
-CONFIG_CDCACM_VENDORID=0x3162
-CONFIG_CDCACM_VENDORSTR="Holybro"
-CONFIG_DEBUG_FULLOPT=y
-CONFIG_DEBUG_SYMBOLS=y
-CONFIG_DEBUG_TCBINFO=y
-CONFIG_DEFAULT_SMALL=y
-CONFIG_EXPERIMENTAL=y
-CONFIG_FDCLONE_DISABLE=y
-CONFIG_FDCLONE_STDIO=y
-CONFIG_HAVE_CXX=y
-CONFIG_HAVE_CXXINITIALIZE=y
-CONFIG_IDLETHREAD_STACKSIZE=750
-CONFIG_INIT_ENTRYPOINT="bootloader_main"
-CONFIG_INIT_STACKSIZE=3194
-CONFIG_LIBC_FLOATINGPOINT=y
-CONFIG_LIBC_LONG_LONG=y
-CONFIG_LIBC_STRERROR=y
-CONFIG_MEMSET_64BIT=y
-CONFIG_MEMSET_OPTSPEED=y
-CONFIG_PREALLOC_TIMERS=50
-CONFIG_PTHREAD_STACK_MIN=512
-CONFIG_RAM_SIZE=245760
-CONFIG_RAM_START=0x20010000
-CONFIG_RAW_BINARY=y
-CONFIG_SERIAL_TERMIOS=y
-CONFIG_SIG_DEFAULT=y
-CONFIG_SIG_SIGALRM_ACTION=y
-CONFIG_SIG_SIGUSR1_ACTION=y
-CONFIG_SIG_SIGUSR2_ACTION=y
-CONFIG_SPI=y
-CONFIG_STACK_COLORATION=y
-CONFIG_START_DAY=30
-CONFIG_START_MONTH=11
-CONFIG_STDIO_BUFFER_SIZE=32
-CONFIG_STM32H7_BKPSRAM=y
-CONFIG_STM32H7_DMA1=y
-CONFIG_STM32H7_DMA2=y
-CONFIG_STM32H7_OTGFS=y
-CONFIG_STM32H7_PROGMEM=y
-CONFIG_STM32H7_SERIAL_DISABLE_REORDERING=y
-CONFIG_STM32H7_TIM1=y
-CONFIG_STM32H7_USART1=y
-CONFIG_SYSTEMTICK_HOOK=y
-CONFIG_SYSTEM_CDCACM=y
-CONFIG_TASK_NAME_SIZE=24
-CONFIG_TTY_SIGINT=y
-CONFIG_TTY_SIGINT_CHAR=0x03
-CONFIG_TTY_SIGTSTP=y
-CONFIG_USART1_RXBUFSIZE=600
-CONFIG_USART1_TXBUFSIZE=300
-CONFIG_USBDEV=y
-CONFIG_USBDEV_BUSPOWERED=y
-CONFIG_USBDEV_MAXPOWER=500
-CONFIG_USEC_PER_TICK=1000

boards/holybro/kakuteh7-wing/nuttx-config/include/board.h

@@ -1,503 +0,0 @@
-/************************************************************************************
- *
- *   Copyright (C) 2016-2019 Gregory Nutt. All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- * 3. Neither the name NuttX nor the names of its contributors may be
- *    used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ************************************************************************************/
-#pragma once
-
-/************************************************************************************
- * Included Files
- ************************************************************************************/
-
-#include "board_dma_map.h"
-
-#include <nuttx/config.h>
-
-#ifndef __ASSEMBLY__
-# include <stdint.h>
-#endif
-
-#include "stm32_rcc.h"
-#include "stm32_sdmmc.h"
-
-/************************************************************************************
- * Pre-processor Definitions
- ************************************************************************************/
-
-/* Clocking *************************************************************************/
-/* The px4_fmu-v6C  board provides the following clock sources:
- *
- *   X1: 16 MHz crystal for HSE
- *
- * So we have these clock source available within the STM32
- *
- *   HSI: 16 MHz RC factory-trimmed
- *   HSE: 16 MHz crystal for HSE
- */
-
-#define STM32_BOARD_XTAL        16000000ul
-
-#define STM32_HSI_FREQUENCY     16000000ul
-#define STM32_LSI_FREQUENCY     32000
-#define STM32_HSE_FREQUENCY     STM32_BOARD_XTAL
-#define STM32_LSE_FREQUENCY     32768
-
-/* Main PLL Configuration.
- *
- * PLL source is HSE = 16,000,000
- *
- * PLL_VCOx = (STM32_HSE_FREQUENCY / PLLM) * PLLN
- * Subject to:
- *
- *     1 <= PLLM <= 63
- *     4 <= PLLN <= 512
- *   150 MHz <= PLL_VCOL <= 420MHz
- *   192 MHz <= PLL_VCOH <= 836MHz
- *
- * SYSCLK  = PLL_VCO / PLLP
- * CPUCLK  = SYSCLK / D1CPRE
- * Subject to
- *
- *   PLLP1   = {2, 4, 6, 8, ..., 128}
- *   PLLP2,3 = {2, 3, 4, ..., 128}
- *   CPUCLK <= 480 MHz
- */
-
-#define STM32_BOARD_USEHSE
-
-#define STM32_PLLCFG_PLLSRC      RCC_PLLCKSELR_PLLSRC_HSE
-
-/* PLL1, wide 4 - 8 MHz input, enable DIVP, DIVQ, DIVR
- *
- *   PLL1_VCO = (16,000,000 / 1) * 60 = 960 MHz
- *
- *   PLL1P = PLL1_VCO/2  = 960 MHz / 2   = 480 MHz
- *   PLL1Q = PLL1_VCO/4  = 960 MHz / 4   = 240 MHz
- *   PLL1R = PLL1_VCO/8  = 960 MHz / 8   = 120 MHz
- */
-
-#define STM32_PLLCFG_PLL1CFG    (RCC_PLLCFGR_PLL1VCOSEL_WIDE | \
-				 RCC_PLLCFGR_PLL1RGE_4_8_MHZ | \
-				 RCC_PLLCFGR_DIVP1EN | \
-				 RCC_PLLCFGR_DIVQ1EN | \
-				 RCC_PLLCFGR_DIVR1EN)
-#define STM32_PLLCFG_PLL1M       RCC_PLLCKSELR_DIVM1(1)
-#define STM32_PLLCFG_PLL1N       RCC_PLL1DIVR_N1(60)
-#define STM32_PLLCFG_PLL1P       RCC_PLL1DIVR_P1(2)
-#define STM32_PLLCFG_PLL1Q       RCC_PLL1DIVR_Q1(4)
-#define STM32_PLLCFG_PLL1R       RCC_PLL1DIVR_R1(8)
-
-#define STM32_VCO1_FREQUENCY     ((STM32_HSE_FREQUENCY / 1) * 60)
-#define STM32_PLL1P_FREQUENCY    (STM32_VCO1_FREQUENCY / 2)
-#define STM32_PLL1Q_FREQUENCY    (STM32_VCO1_FREQUENCY / 4)
-#define STM32_PLL1R_FREQUENCY    (STM32_VCO1_FREQUENCY / 8)
-
-/* PLL2 */
-
-#define STM32_PLLCFG_PLL2CFG     (RCC_PLLCFGR_PLL2VCOSEL_WIDE | \
-				  RCC_PLLCFGR_PLL2RGE_4_8_MHZ | \
-				  RCC_PLLCFGR_DIVP2EN | \
-				  RCC_PLLCFGR_DIVQ2EN | \
-				  RCC_PLLCFGR_DIVR2EN)
-#define STM32_PLLCFG_PLL2M       RCC_PLLCKSELR_DIVM2(4)
-#define STM32_PLLCFG_PLL2N       RCC_PLL2DIVR_N2(48)
-#define STM32_PLLCFG_PLL2P       RCC_PLL2DIVR_P2(2)
-#define STM32_PLLCFG_PLL2Q       RCC_PLL2DIVR_Q2(2)
-#define STM32_PLLCFG_PLL2R       RCC_PLL2DIVR_R2(2)
-
-#define STM32_VCO2_FREQUENCY     ((STM32_HSE_FREQUENCY / 4) * 48)
-#define STM32_PLL2P_FREQUENCY    (STM32_VCO2_FREQUENCY / 2)
-#define STM32_PLL2Q_FREQUENCY    (STM32_VCO2_FREQUENCY / 2)
-#define STM32_PLL2R_FREQUENCY    (STM32_VCO2_FREQUENCY / 2)
-
-/* PLL3 */
-
-#define STM32_PLLCFG_PLL3CFG    (RCC_PLLCFGR_PLL3VCOSEL_WIDE | \
-				 RCC_PLLCFGR_PLL3RGE_4_8_MHZ | \
-				 RCC_PLLCFGR_DIVQ3EN)
-#define STM32_PLLCFG_PLL3M      RCC_PLLCKSELR_DIVM3(4)
-#define STM32_PLLCFG_PLL3N      RCC_PLL3DIVR_N3(48)
-#define STM32_PLLCFG_PLL3P      RCC_PLL3DIVR_P3(2)
-#define STM32_PLLCFG_PLL3Q      RCC_PLL3DIVR_Q3(4)
-#define STM32_PLLCFG_PLL3R      RCC_PLL3DIVR_R3(2)
-
-#define STM32_VCO3_FREQUENCY    ((STM32_HSE_FREQUENCY / 4) * 48)
-#define STM32_PLL3P_FREQUENCY   (STM32_VCO3_FREQUENCY / 2)
-#define STM32_PLL3Q_FREQUENCY   (STM32_VCO3_FREQUENCY / 4)
-#define STM32_PLL3R_FREQUENCY   (STM32_VCO3_FREQUENCY / 2)
-
-/* SYSCLK = PLL1P = 480MHz
- * CPUCLK = SYSCLK / 1 = 480 MHz
- */
-
-#define STM32_RCC_D1CFGR_D1CPRE  (RCC_D1CFGR_D1CPRE_SYSCLK)
-#define STM32_SYSCLK_FREQUENCY   (STM32_PLL1P_FREQUENCY)
-#define STM32_CPUCLK_FREQUENCY   (STM32_SYSCLK_FREQUENCY / 1)
-
-/* Configure Clock Assignments */
-
-/* AHB clock (HCLK) is SYSCLK/2 (240 MHz max)
- * HCLK1 = HCLK2 = HCLK3 = HCLK4 = 240
- */
-
-#define STM32_RCC_D1CFGR_HPRE   RCC_D1CFGR_HPRE_SYSCLKd2        /* HCLK  = SYSCLK / 2 */
-#define STM32_ACLK_FREQUENCY    (STM32_CPUCLK_FREQUENCY / 2)    /* ACLK in D1, HCLK3 in D1 */
-#define STM32_HCLK_FREQUENCY    (STM32_CPUCLK_FREQUENCY / 2)    /* HCLK in D2, HCLK4 in D3 */
-#define STM32_BOARD_HCLK        STM32_HCLK_FREQUENCY            /* same as above, to satisfy compiler */
-
-/* APB1 clock (PCLK1) is HCLK/2 (120 MHz) */
-
-#define STM32_RCC_D2CFGR_D2PPRE1  RCC_D2CFGR_D2PPRE1_HCLKd2       /* PCLK1 = HCLK / 2 */
-#define STM32_PCLK1_FREQUENCY     (STM32_HCLK_FREQUENCY/2)
-
-/* APB2 clock (PCLK2) is HCLK/2 (120 MHz) */
-
-#define STM32_RCC_D2CFGR_D2PPRE2  RCC_D2CFGR_D2PPRE2_HCLKd2       /* PCLK2 = HCLK / 2 */
-#define STM32_PCLK2_FREQUENCY     (STM32_HCLK_FREQUENCY/2)
-
-/* APB3 clock (PCLK3) is HCLK/2 (120 MHz) */
-
-#define STM32_RCC_D1CFGR_D1PPRE   RCC_D1CFGR_D1PPRE_HCLKd2        /* PCLK3 = HCLK / 2 */
-#define STM32_PCLK3_FREQUENCY     (STM32_HCLK_FREQUENCY/2)
-
-/* APB4 clock (PCLK4) is HCLK/4 (120 MHz) */
-
-#define STM32_RCC_D3CFGR_D3PPRE   RCC_D3CFGR_D3PPRE_HCLKd2       /* PCLK4 = HCLK / 2 */
-#define STM32_PCLK4_FREQUENCY     (STM32_HCLK_FREQUENCY/2)
-
-/* Timer clock frequencies */
-
-/* Timers driven from APB1 will be twice PCLK1 */
-
-#define STM32_APB1_TIM2_CLKIN   (2*STM32_PCLK1_FREQUENCY)
-#define STM32_APB1_TIM3_CLKIN   (2*STM32_PCLK1_FREQUENCY)
-#define STM32_APB1_TIM4_CLKIN   (2*STM32_PCLK1_FREQUENCY)
-#define STM32_APB1_TIM5_CLKIN   (2*STM32_PCLK1_FREQUENCY)
-#define STM32_APB1_TIM6_CLKIN   (2*STM32_PCLK1_FREQUENCY)
-#define STM32_APB1_TIM7_CLKIN   (2*STM32_PCLK1_FREQUENCY)
-#define STM32_APB1_TIM12_CLKIN  (2*STM32_PCLK1_FREQUENCY)
-#define STM32_APB1_TIM13_CLKIN  (2*STM32_PCLK1_FREQUENCY)
-#define STM32_APB1_TIM14_CLKIN  (2*STM32_PCLK1_FREQUENCY)
-
-/* Timers driven from APB2 will be twice PCLK2 */
-
-#define STM32_APB2_TIM1_CLKIN   (2*STM32_PCLK2_FREQUENCY)
-#define STM32_APB2_TIM8_CLKIN   (2*STM32_PCLK2_FREQUENCY)
-#define STM32_APB2_TIM15_CLKIN  (2*STM32_PCLK2_FREQUENCY)
-#define STM32_APB2_TIM16_CLKIN  (2*STM32_PCLK2_FREQUENCY)
-#define STM32_APB2_TIM17_CLKIN  (2*STM32_PCLK2_FREQUENCY)
-
-/* Kernel Clock Configuration
- *
- * Note: look at Table 54 in ST Manual
- */
-
-/* I2C123 clock source */
-
-#define STM32_RCC_D2CCIP2R_I2C123SRC RCC_D2CCIP2R_I2C123SEL_HSI
-
-/* I2C4 clock source */
-
-#define STM32_RCC_D3CCIPR_I2C4SRC    RCC_D3CCIPR_I2C4SEL_HSI
-
-/* SPI123 clock source */
-
-#define STM32_RCC_D2CCIP1R_SPI123SRC RCC_D2CCIP1R_SPI123SEL_PLL2
-
-/* SPI45 clock source */
-
-#define STM32_RCC_D2CCIP1R_SPI45SRC  RCC_D2CCIP1R_SPI45SEL_PLL2
-
-/* SPI6 clock source */
-
-#define STM32_RCC_D3CCIPR_SPI6SRC    RCC_D3CCIPR_SPI6SEL_PLL2
-
-/* USB 1 and 2 clock source */
-
-#define STM32_RCC_D2CCIP2R_USBSRC    RCC_D2CCIP2R_USBSEL_PLL3
-
-/* UART clock selection */
-/* reset to default to overwrite any changes done by any bootloader */
-
-#define STM32_RCC_D2CCIP2R_USART234578_SEL RCC_D2CCIP2R_USART234578SEL_RCC
-#define STM32_RCC_D2CCIP2R_USART16_SEL     RCC_D2CCIP2R_USART16SEL_RCC
-
-/* ADC 1 2 3 clock source */
-
-#define STM32_RCC_D3CCIPR_ADCSRC     RCC_D3CCIPR_ADCSEL_PLL2
-
-/* FDCAN 1 2 clock source */
-
-#define STM32_RCC_D2CCIP1R_FDCANSEL  RCC_D2CCIP1R_FDCANSEL_HSE   /* FDCAN 1 2 clock source */
-
-#define STM32_FDCANCLK               STM32_HSE_FREQUENCY
-
-/* FLASH wait states
- *
- *  ------------ ---------- -----------
- *  Vcore        MAX ACLK   WAIT STATES
- *  ------------ ---------- -----------
- *  1.15-1.26 V     70 MHz    0
- *  (VOS1 level)   140 MHz    1
- *                 210 MHz    2
- *  1.05-1.15 V     55 MHz    0
- *  (VOS2 level)   110 MHz    1
- *                 165 MHz    2
- *                 220 MHz    3
- *  0.95-1.05 V     45 MHz    0
- *  (VOS3 level)    90 MHz    1
- *                 135 MHz    2
- *                 180 MHz    3
- *                 225 MHz    4
- *  ------------ ---------- -----------
- */
-
-#define BOARD_FLASH_WAITSTATES 2
-
-/* SDMMC definitions ********************************************************/
-
-/* Init 400kHz, freq = PLL1Q/(2*div)  div =  PLL1Q/(2*freq) */
-
-#define STM32_SDMMC_INIT_CLKDIV     (300 << STM32_SDMMC_CLKCR_CLKDIV_SHIFT)
-
-/* 25 MHz Max for now, 25 mHZ = PLL1Q/(2*div), div =  PLL1Q/(2*freq)
- * div = 4.8 = 240 / 50, So round up to 5 for default speed 24 MB/s
- */
-
-#if defined(CONFIG_STM32H7_SDMMC_XDMA) || defined(CONFIG_STM32H7_SDMMC_IDMA)
-#  define STM32_SDMMC_MMCXFR_CLKDIV   (5 << STM32_SDMMC_CLKCR_CLKDIV_SHIFT)
-#else
-#  define STM32_SDMMC_MMCXFR_CLKDIV   (100 << STM32_SDMMC_CLKCR_CLKDIV_SHIFT)
-#endif
-#if defined(CONFIG_STM32H7_SDMMC_XDMA) || defined(CONFIG_STM32H7_SDMMC_IDMA)
-#  define STM32_SDMMC_SDXFR_CLKDIV    (5 << STM32_SDMMC_CLKCR_CLKDIV_SHIFT)
-#else
-#  define STM32_SDMMC_SDXFR_CLKDIV    (100 << STM32_SDMMC_CLKCR_CLKDIV_SHIFT)
-#endif
-
-#define STM32_SDMMC_CLKCR_EDGE      STM32_SDMMC_CLKCR_NEGEDGE
-
-/* LED definitions ******************************************************************/
-/* The PX4 FMUV6C board has three, LED_GREEN a Green LED, LED_BLUE a Blue LED and
- * LED_RED a Red LED, that can be controlled by software.
- *
- * If CONFIG_ARCH_LEDS is not defined, then the user can control the LEDs in any way.
- * The following definitions are used to access individual LEDs.
- */
-
-/* LED index values for use with board_userled() */
-
-/* LED definitions ******************************************************************/
-/* The px4_fmu-v6c board has three, LED_GREEN a Green LED, LED_BLUE a Blue LED and
- * LED_RED a Red LED, that can be controlled by software.
- *
- * If CONFIG_ARCH_LEDS is not defined, then the user can control the LEDs in any way.
- * The following definitions are used to access individual LEDs.
- */
-
-/* LED index values for use with board_userled() */
-
-#define BOARD_LED1        0
-#define BOARD_LED2        1
-#define BOARD_LED3        2
-#define BOARD_NLEDS       3
-
-#define BOARD_LED_RED     BOARD_LED1
-#define BOARD_LED_GREEN   BOARD_LED2
-#define BOARD_LED_BLUE    BOARD_LED3
-
-/* LED bits for use with board_userled_all() */
-
-#define BOARD_LED1_BIT    (1 << BOARD_LED1)
-#define BOARD_LED2_BIT    (1 << BOARD_LED2)
-#define BOARD_LED3_BIT    (1 << BOARD_LED3)
-
-/* If CONFIG_ARCH_LEDS is defined, the usage by the board port is defined in
- * include/board.h and src/stm32_leds.c. The LEDs are used to encode OS-related
- * events as follows:
- *
- *
- *   SYMBOL                     Meaning                      LED state
- *                                                        Red   Green Blue
- *   ----------------------  --------------------------  ------ ------ ----*/
-
-#define LED_STARTED        0 /* NuttX has been started   OFF    OFF   OFF  */
-#define LED_HEAPALLOCATE   1 /* Heap has been allocated  OFF    OFF   ON   */
-#define LED_IRQSENABLED    2 /* Interrupts enabled       OFF    ON    OFF  */
-#define LED_STACKCREATED   3 /* Idle stack created       OFF    ON    ON   */
-#define LED_INIRQ          4 /* In an interrupt          N/C    N/C   GLOW */
-#define LED_SIGNAL         5 /* In a signal handler      N/C    GLOW  N/C  */
-#define LED_ASSERTION      6 /* An assertion failed      GLOW   N/C   GLOW */
-#define LED_PANIC          7 /* The system has crashed   Blink  OFF   N/C  */
-#define LED_IDLE           8 /* MCU is is sleep mode     ON     OFF   OFF  */
-
-/* Thus if the Green LED is statically on, NuttX has successfully booted and
- * is, apparently, running normally.  If the Red LED is flashing at
- * approximately 2Hz, then a fatal error has been detected and the system
- * has halted.
- */
-
-/* Alternate function pin selections ************************************************/
-
-#define GPIO_USART1_RX   GPIO_USART1_RX_2    /* PA10 */
-#define GPIO_USART1_TX   GPIO_USART1_TX_3    /* PB6 */
-
-#define GPIO_USART2_RX   GPIO_USART2_RX_2   /* PD6   */
-#define GPIO_USART2_TX   GPIO_USART2_TX_2   /* PD5   */
-
-#define GPIO_USART3_RX   GPIO_USART3_RX_3   /* PD9   */
-#define GPIO_USART3_TX   GPIO_USART3_TX_3   /* PD8   */
-
-#define GPIO_UART5_RX    GPIO_UART5_RX_3    /* PD2  */
-#define GPIO_UART5_TX    GPIO_UART5_TX_1    /* PB13 */
-
-#define GPIO_USART6_RX   GPIO_USART6_RX_1   /* PC7 */
-#define GPIO_USART6_TX   GPIO_USART6_TX_1   /* PC6  */
-
-#define GPIO_UART7_RX    GPIO_UART7_RX_3    /* PE7  */
-#define GPIO_UART7_TX    GPIO_UART7_TX_3    /* PE8  */
-#define GPIO_UART7_RTS   GPIO_UART7_RTS_1   /* PE9  */
-#define GPIO_UART7_CTS   (GPIO_UART7_CTS_1 | GPIO_PULLDOWN) /* PE10 */
-
-#define GPIO_UART8_RX    GPIO_UART8_RX_1    /* PE0 */
-#define GPIO_UART8_TX    GPIO_UART8_TX_1    /* PE1 */
-
-
-/* CAN
- *
- * CAN1 is routed to transceiver.
- */
-#define GPIO_CAN1_RX     GPIO_CAN1_RX_3     /* PD0  */
-#define GPIO_CAN1_TX     GPIO_CAN1_TX_3     /* PD1  */
-
-/* SPI
- *
- * SPI1, SPI 3 for sensors
- * SPI2 for OSD
- */
-
-#define ADJ_SLEW_RATE(p) (((p) & ~GPIO_SPEED_MASK) | (GPIO_SPEED_2MHz))
-
-#define GPIO_SPI1_MISO   GPIO_SPI1_MISO_1               /* PA6  */
-#define GPIO_SPI1_MOSI   GPIO_SPI1_MOSI_1               /* PA7  */
-#define GPIO_SPI1_SCK    ADJ_SLEW_RATE(GPIO_SPI1_SCK_1) /* PA5  */
-
-#define GPIO_SPI2_MISO   GPIO_SPI2_MISO_2               /* PC2  */
-#define GPIO_SPI2_MOSI   GPIO_SPI2_MOSI_3               /* PC3  */
-#define GPIO_SPI2_SCK    ADJ_SLEW_RATE(GPIO_SPI2_SCK_5) /* PD3  */
-
-#define GPIO_SPI3_MISO   GPIO_SPI3_MISO_2               /* PC11  */
-#define GPIO_SPI3_MOSI   GPIO_SPI3_MOSI_2               /* PC12  */
-#define GPIO_SPI3_SCK    ADJ_SLEW_RATE(GPIO_SPI3_SCK_2) /* PC10  */
-
-
-/*
- * I2C
- *
- */
-
-#define GPIO_I2C1_SCL GPIO_I2C1_SCL_2       /* PB8  */
-#define GPIO_I2C1_SDA GPIO_I2C1_SDA_1       /* PB7  */
-
-#define GPIO_I2C1_SCL_GPIO                  (GPIO_OUTPUT | GPIO_OPENDRAIN |GPIO_SPEED_50MHz | GPIO_OUTPUT_SET | GPIO_PORTB | GPIO_PIN8)
-#define GPIO_I2C1_SDA_GPIO                  (GPIO_OUTPUT | GPIO_OPENDRAIN |GPIO_SPEED_50MHz | GPIO_OUTPUT_SET | GPIO_PORTB | GPIO_PIN7)
-
-#define GPIO_I2C2_SCL GPIO_I2C2_SCL_1       /* PB10 */
-#define GPIO_I2C2_SDA GPIO_I2C2_SDA_1       /* PB11*/
-
-#define GPIO_I2C2_SCL_GPIO                  (GPIO_OUTPUT | GPIO_OPENDRAIN |GPIO_SPEED_50MHz | GPIO_OUTPUT_SET | GPIO_PORTB | GPIO_PIN10)
-#define GPIO_I2C2_SDA_GPIO                  (GPIO_OUTPUT | GPIO_OPENDRAIN |GPIO_SPEED_50MHz | GPIO_OUTPUT_SET | GPIO_PORTB | GPIO_PIN11)
-
-#define GPIO_I2C4_SCL GPIO_I2C4_SCL_1       /* PD12 */
-#define GPIO_I2C4_SDA GPIO_I2C4_SDA_1       /* PD13 */
-
-#define GPIO_I2C4_SCL_GPIO                  (GPIO_OUTPUT | GPIO_OPENDRAIN | GPIO_SPEED_50MHz | GPIO_OUTPUT_SET | GPIO_PORTD | GPIO_PIN12)
-#define GPIO_I2C4_SDA_GPIO                  (GPIO_OUTPUT | GPIO_OPENDRAIN | GPIO_SPEED_50MHz | GPIO_OUTPUT_SET | GPIO_PORTD | GPIO_PIN13)
-
-/* SDMMC2
- *
- *      VDD 3.3
- *      GND
- *      SDMMC2_CK                           PC1
- *      SDMMC2_CMD                          PD7
- *      SDMMC2_D0                           PB14
- *      SDMMC2_D1                           PB15
- *      SDMMC2_D2                           PB3
- *      SDMMC2_D3                           PB4
- */
-
-#define GPIO_SDMMC2_CK   GPIO_SDMMC2_CK_2  /* PC1  */
-#define GPIO_SDMMC2_CMD  GPIO_SDMMC2_CMD_1 /* PD7  */
-//      GPIO_SDMMC2_D0   No Remap          /* PB14 */
-//      GPIO_SDMMC2_D1   No Remap          /* PB15 */
-#define GPIO_SDMMC2_D2   GPIO_SDMMC2_D2_2  /* PB3  */
-//      GPIO_SDMMC2_D3    No Remap         /* PB4  */
-
-/* USB
- *
- *      OTG_FS_DM                           PA11
- *      OTG_FS_DP                           PA12
- *      VBUS                                PA9
- */
-
-
-/* Board provides GPIO or other Hardware for signaling to timing analyzer */
-
-#if defined(CONFIG_BOARD_USE_PROBES)
-# include "stm32_gpio.h"
-# define PROBE_N(n) (1<<((n)-1))
-# define PROBE_1    (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTA|GPIO_PIN8)   /* PA8  AUX1 */
-# define PROBE_2    (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTE|GPIO_PIN11)  /* PE11 AUX2 */
-# define PROBE_3    (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTE|GPIO_PIN13)  /* PE13 AUX3 */
-# define PROBE_4    (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTE|GPIO_PIN14)  /* PE14 AUX4 */
-# define PROBE_5    (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTD|GPIO_PIN14)  /* PD14 AUX5 */
-# define PROBE_6    (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTD|GPIO_PIN15)  /* PD15 AUX6 */
-# define PROBE_7    (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTA|GPIO_PIN0)   /* PA0  AUX7 */
-# define PROBE_8    (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTA|GPIO_PIN2)   /* PA1  AUX8 */
-
-# define PROBE_INIT(mask) \
-	do { \
-		if ((mask)& PROBE_N(1)) { stm32_configgpio(PROBE_1); } \
-		if ((mask)& PROBE_N(2)) { stm32_configgpio(PROBE_2); } \
-		if ((mask)& PROBE_N(3)) { stm32_configgpio(PROBE_3); } \
-		if ((mask)& PROBE_N(4)) { stm32_configgpio(PROBE_4); } \
-		if ((mask)& PROBE_N(5)) { stm32_configgpio(PROBE_5); } \
-		if ((mask)& PROBE_N(6)) { stm32_configgpio(PROBE_6); } \
-		if ((mask)& PROBE_N(7)) { stm32_configgpio(PROBE_7); } \
-		if ((mask)& PROBE_N(8)) { stm32_configgpio(PROBE_8); } \
-	} while(0)
-
-# define PROBE(n,s)  do {stm32_gpiowrite(PROBE_##n,(s));}while(0)
-# define PROBE_MARK(n) PROBE(n,false);PROBE(n,true)
-#else
-# define PROBE_INIT(mask)
-# define PROBE(n,s)
-# define PROBE_MARK(n)
-#endif

boards/holybro/kakuteh7-wing/nuttx-config/include/board_dma_map.h

@@ -1,81 +0,0 @@
-/****************************************************************************
- *
- *   Copyright (c) 2025 PX4 Development Team. All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- * 3. Neither the name PX4 nor the names of its contributors may be
- *    used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ****************************************************************************/
-
-#pragma once
-
-// DMAMUX1 Using at most 8 Channels on DMA1 --------   Assigned
-//                                                     V
-
-#define DMAMAP_SPI1_RX    DMAMAP_DMA12_SPI1RX_0     /* 1 DMA1:37  */
-#define DMAMAP_SPI1_TX    DMAMAP_DMA12_SPI1TX_0     /* 2 DMA1:38  */
-
-#define DMAMAP_SPI3_RX    DMAMAP_DMA12_SPI3RX_0     /* 3 DMA1:39 FRAM */
-#define DMAMAP_SPI3_TX    DMAMAP_DMA12_SPI3TX_0     /* 4 DMA1:40 FRAM */
-
-// TODO
-//#define DMAMAP_USART1_RX  DMAMAP_DMA12_USART1RX_0 /*  DMA1:41  GPS1 */
-//#define DMAMAP_USART1_TX  DMAMAP_DMA12_USART1TX_0 /*  DMA1:42  GPS1 */
-
-//#define DMAMAP_USART2_RX  DMAMAP_DMA12_USART2RX_0 /*  DMA1:43 Telem3 */
-//#define DMAMAP_USART2_TX  DMAMAP_DMA12_USART2TX_0 /*  DMA1:44 Telem3 */
-
-//#define DMAMAP_USART3_RX  DMAMAP_DMA12_USART3RX_0 /*  DMA1:45 DEBUG */
-//#define DMAMAP_USART3_TX  DMAMAP_DMA12_USART3TX_0 /*  DMA1:46 DEBUG */
-
-//#define DMAMAP_UART4_RX   DMAMAP_DMA12_UART4RX_0  /*  DMA1:63 EXT2 */
-//#define DMAMAP_UART4_TX   DMAMAP_DMA12_UART4TX_0  /*  DMA1:64 EXT2 */
-
-//#define DMAMAP_USART6_RX  DMAMAP_DMA12_USART6RX_0   /* 5 DMA1:71 PX4IO */
-//#define DMAMAP_USART6_TX  DMAMAP_DMA12_USART6TX_0   /* 6 DMA1:72 PX4IO */
-
-// Assigned in timer_config.cpp
-
-// TODO
-// Timer 4                                          /* 7 DMA1:32 TIM4UP */
-// Timer 5                                          /* 8 DMA1:50 TIM5UP */
-
-// DMAMUX2 Using at most 8 Channels on DMA2 --------   Assigned
-//                                                     V
-
-// TODO
-#define DMAMAP_USART3_RX  DMAMAP_DMA12_USART3RX_1   /* 1 DMA2:45  */
-#define DMAMAP_USART3_TX  DMAMAP_DMA12_USART3TX_1   /* 2 DMA2:46  */
-
-#define DMAMAP_UART5_RX   DMAMAP_DMA12_UART5RX_1    /* 3 DMA2:65  */
-#define DMAMAP_UART5_TX   DMAMAP_DMA12_UART5TX_1    /* 4 DMA2:66  */
-
-//#define DMAMAP_USART6_RX  DMAMAP_DMA12_USART6RX_1   /* 5 DMA2:71  */
-//#define DMAMAP_USART6_TX  DMAMAP_DMA12_USART6TX_1   /* 6 DMA2:72  */
-
-#define DMAMAP_UART7_RX   DMAMAP_DMA12_UART7RX_1    /* 7 DMA1:79  */
-#define DMAMAP_UART7_TX   DMAMAP_DMA12_UART7TX_1    /* 8 DMA1:80  */

boards/holybro/kakuteh7-wing/nuttx-config/nsh/defconfig

@@ -1,270 +0,0 @@
-#
-# This file is autogenerated: PLEASE DO NOT EDIT IT.
-#
-# You can use "make menuconfig" to make any modifications to the installed .config file.
-# You can then do "make savedefconfig" to generate a new defconfig file that includes your
-# modifications.
-#
-# CONFIG_DISABLE_ENVIRON is not set
-# CONFIG_DISABLE_PSEUDOFS_OPERATIONS is not set
-# CONFIG_DISABLE_PTHREAD is not set
-# CONFIG_MMCSD_HAVE_CARDDETECT is not set
-# CONFIG_MMCSD_HAVE_WRITEPROTECT is not set
-# CONFIG_MMCSD_MMCSUPPORT is not set
-# CONFIG_MMCSD_SPI is not set
-# CONFIG_NSH_DISABLEBG is not set
-# CONFIG_NSH_DISABLESCRIPT is not set
-# CONFIG_NSH_DISABLE_CAT is not set
-# CONFIG_NSH_DISABLE_CD is not set
-# CONFIG_NSH_DISABLE_CP is not set
-# CONFIG_NSH_DISABLE_DATE is not set
-# CONFIG_NSH_DISABLE_DF is not set
-# CONFIG_NSH_DISABLE_ECHO is not set
-# CONFIG_NSH_DISABLE_ENV is not set
-# CONFIG_NSH_DISABLE_EXEC is not set
-# CONFIG_NSH_DISABLE_EXIT is not set
-# CONFIG_NSH_DISABLE_EXPORT is not set
-# CONFIG_NSH_DISABLE_FREE is not set
-# CONFIG_NSH_DISABLE_GET is not set
-# CONFIG_NSH_DISABLE_HELP is not set
-# CONFIG_NSH_DISABLE_ITEF is not set
-# CONFIG_NSH_DISABLE_KILL is not set
-# CONFIG_NSH_DISABLE_LOOPS is not set
-# CONFIG_NSH_DISABLE_LS is not set
-# CONFIG_NSH_DISABLE_MKDIR is not set
-# CONFIG_NSH_DISABLE_MKFATFS is not set
-# CONFIG_NSH_DISABLE_MOUNT is not set
-# CONFIG_NSH_DISABLE_MV is not set
-# CONFIG_NSH_DISABLE_PS is not set
-# CONFIG_NSH_DISABLE_PSSTACKUSAGE is not set
-# CONFIG_NSH_DISABLE_PWD is not set
-# CONFIG_NSH_DISABLE_RM is not set
-# CONFIG_NSH_DISABLE_RMDIR is not set
-# CONFIG_NSH_DISABLE_SEMICOLON is not set
-# CONFIG_NSH_DISABLE_SET is not set
-# CONFIG_NSH_DISABLE_SLEEP is not set
-# CONFIG_NSH_DISABLE_SOURCE is not set
-# CONFIG_NSH_DISABLE_TEST is not set
-# CONFIG_NSH_DISABLE_TIME is not set
-# CONFIG_NSH_DISABLE_UMOUNT is not set
-# CONFIG_NSH_DISABLE_UNSET is not set
-# CONFIG_NSH_DISABLE_USLEEP is not set
-CONFIG_ARCH="arm"
-CONFIG_ARCH_BOARD_CUSTOM=y
-CONFIG_ARCH_BOARD_CUSTOM_DIR="../../../../boards/holybro/kakuteh7-wing/nuttx-config"
-CONFIG_ARCH_BOARD_CUSTOM_DIR_RELPATH=y
-CONFIG_ARCH_BOARD_CUSTOM_NAME="px4"
-CONFIG_ARCH_CHIP="stm32h7"
-CONFIG_ARCH_CHIP_STM32H743VI=y
-CONFIG_ARCH_CHIP_STM32H7=y
-CONFIG_ARCH_INTERRUPTSTACK=768
-CONFIG_ARCH_STACKDUMP=y
-CONFIG_ARMV7M_BASEPRI_WAR=y
-CONFIG_ARMV7M_DCACHE=y
-CONFIG_ARMV7M_DTCM=y
-CONFIG_ARMV7M_ICACHE=y
-CONFIG_ARMV7M_MEMCPY=y
-CONFIG_ARMV7M_USEBASEPRI=y
-CONFIG_ARM_MPU_EARLY_RESET=y
-CONFIG_BOARDCTL_RESET=y
-CONFIG_BOARD_ASSERT_RESET_VALUE=0
-CONFIG_BOARD_CRASHDUMP=y
-CONFIG_BOARD_LOOPSPERMSEC=95751
-CONFIG_BOARD_RESET_ON_ASSERT=2
-CONFIG_BUILTIN=y
-CONFIG_CDCACM=y
-CONFIG_CDCACM_IFLOWCONTROL=y
-CONFIG_CDCACM_PRODUCTID=0x0051
-CONFIG_CDCACM_PRODUCTSTR="PX4 KakuteH7-Wing"
-CONFIG_CDCACM_RXBUFSIZE=600
-CONFIG_CDCACM_TXBUFSIZE=12000
-CONFIG_CDCACM_VENDORID=0x3162
-CONFIG_CDCACM_VENDORSTR="Holybro"
-CONFIG_DEBUG_FULLOPT=y
-CONFIG_DEBUG_HARDFAULT_ALERT=y
-CONFIG_DEBUG_MEMFAULT=y
-CONFIG_DEBUG_SYMBOLS=y
-CONFIG_DEBUG_TCBINFO=y
-CONFIG_DEFAULT_SMALL=y
-CONFIG_DEV_FIFO_SIZE=0
-CONFIG_DEV_PIPE_MAXSIZE=1024
-CONFIG_DEV_PIPE_SIZE=70
-CONFIG_EXPERIMENTAL=y
-CONFIG_FAT_DMAMEMORY=y
-CONFIG_FAT_LCNAMES=y
-CONFIG_FAT_LFN=y
-CONFIG_FAT_LFN_ALIAS_HASH=y
-CONFIG_FDCLONE_STDIO=y
-CONFIG_FS_BINFS=y
-CONFIG_FS_CROMFS=y
-CONFIG_FS_FAT=y
-CONFIG_FS_FATTIME=y
-CONFIG_FS_PROCFS=y
-CONFIG_FS_PROCFS_INCLUDE_PROGMEM=y
-CONFIG_FS_PROCFS_MAX_TASKS=64
-CONFIG_FS_PROCFS_REGISTER=y
-CONFIG_FS_ROMFS=y
-CONFIG_GRAN=y
-CONFIG_GRAN_INTR=y
-CONFIG_HAVE_CXX=y
-CONFIG_HAVE_CXXINITIALIZE=y
-CONFIG_I2C=y
-CONFIG_I2C_RESET=y
-CONFIG_IDLETHREAD_STACKSIZE=750
-CONFIG_INIT_ENTRYPOINT="nsh_main"
-CONFIG_INIT_STACKSIZE=3194
-CONFIG_IOB_NBUFFERS=24
-CONFIG_IOB_NCHAINS=24
-CONFIG_LIBC_FLOATINGPOINT=y
-CONFIG_LIBC_LONG_LONG=y
-CONFIG_LIBC_MAX_EXITFUNS=1
-CONFIG_LIBC_STRERROR=y
-CONFIG_MEMSET_64BIT=y
-CONFIG_MEMSET_OPTSPEED=y
-CONFIG_MMCSD=y
-CONFIG_MMCSD_SDIO=y
-CONFIG_MMCSD_SDIOWAIT_WRCOMPLETE=y
-CONFIG_MM_IOB=y
-CONFIG_MM_REGIONS=4
-CONFIG_MTD=y
-CONFIG_MTD_BYTE_WRITE=y
-CONFIG_MTD_PARTITION=y
-CONFIG_MTD_PROGMEM=y
-CONFIG_MTD_RAMTRON=y
-CONFIG_NAME_MAX=40
-CONFIG_NSH_ARCHINIT=y
-CONFIG_NSH_ARGCAT=y
-CONFIG_NSH_BUILTIN_APPS=y
-CONFIG_NSH_CMDPARMS=y
-CONFIG_NSH_CROMFSETC=y
-CONFIG_NSH_LINELEN=128
-CONFIG_NSH_MAXARGUMENTS=15
-CONFIG_NSH_NESTDEPTH=8
-CONFIG_NSH_QUOTE=y
-CONFIG_NSH_ROMFSETC=y
-CONFIG_NSH_ROMFSSECTSIZE=128
-CONFIG_NSH_STRERROR=y
-CONFIG_NSH_VARS=y
-CONFIG_OTG_ID_GPIO_DISABLE=y
-CONFIG_PIPES=y
-CONFIG_PREALLOC_TIMERS=50
-CONFIG_PRIORITY_INHERITANCE=y
-CONFIG_PTHREAD_MUTEX_ROBUST=y
-CONFIG_PTHREAD_STACK_MIN=512
-CONFIG_RAMTRON_EMULATE_PAGE_SHIFT=5
-CONFIG_RAMTRON_EMULATE_SECTOR_SHIFT=5
-CONFIG_RAMTRON_SETSPEED=y
-CONFIG_RAM_SIZE=245760
-CONFIG_RAM_START=0x20010000
-CONFIG_RAW_BINARY=y
-CONFIG_READLINE_CMD_HISTORY=y
-CONFIG_READLINE_TABCOMPLETION=y
-CONFIG_RTC_DATETIME=y
-CONFIG_SCHED_HPWORK=y
-CONFIG_SCHED_HPWORKPRIORITY=249
-CONFIG_SCHED_HPWORKSTACKSIZE=1280
-CONFIG_SCHED_INSTRUMENTATION=y
-CONFIG_SCHED_INSTRUMENTATION_EXTERNAL=y
-CONFIG_SCHED_INSTRUMENTATION_SWITCH=y
-CONFIG_SCHED_LPWORK=y
-CONFIG_SCHED_LPWORKPRIORITY=50
-CONFIG_SCHED_LPWORKSTACKSIZE=1632
-CONFIG_SCHED_WAITPID=y
-CONFIG_SEM_PREALLOCHOLDERS=32
-CONFIG_SERIAL_IFLOWCONTROL_WATERMARKS=y
-CONFIG_SERIAL_TERMIOS=y
-CONFIG_SIG_DEFAULT=y
-CONFIG_SIG_SIGALRM_ACTION=y
-CONFIG_SIG_SIGUSR1_ACTION=y
-CONFIG_SIG_SIGUSR2_ACTION=y
-CONFIG_SIG_SIGWORK=4
-CONFIG_STACK_COLORATION=y
-CONFIG_START_DAY=30
-CONFIG_START_MONTH=11
-CONFIG_STDIO_BUFFER_SIZE=256
-CONFIG_STM32H7_ADC1=y
-CONFIG_STM32H7_ADC3=y
-CONFIG_STM32H7_BBSRAM=y
-CONFIG_STM32H7_BBSRAM_FILES=5
-CONFIG_STM32H7_BDMA=y
-CONFIG_STM32H7_BKPSRAM=y
-CONFIG_STM32H7_DMA1=y
-CONFIG_STM32H7_DMA2=y
-CONFIG_STM32H7_DMACAPABLE=y
-CONFIG_STM32H7_FLOWCONTROL_BROKEN=y
-CONFIG_STM32H7_I2C1=y
-CONFIG_STM32H7_I2C2=y
-CONFIG_STM32H7_I2C4=y
-CONFIG_STM32H7_I2C_DYNTIMEO=y
-CONFIG_STM32H7_I2C_DYNTIMEO_STARTSTOP=10
-CONFIG_STM32H7_OTGFS=y
-CONFIG_STM32H7_PROGMEM=y
-CONFIG_STM32H7_RTC=y
-CONFIG_STM32H7_RTC_HSECLOCK=y
-CONFIG_STM32H7_RTC_MAGIC_REG=1
-CONFIG_STM32H7_SAVE_CRASHDUMP=y
-CONFIG_STM32H7_SDMMC2=y
-CONFIG_STM32H7_SERIALBRK_BSDCOMPAT=y
-CONFIG_STM32H7_SERIAL_DISABLE_REORDERING=y
-CONFIG_STM32H7_SPI1=y
-CONFIG_STM32H7_SPI1_DMA=y
-CONFIG_STM32H7_SPI1_DMA_BUFFER=1024
-CONFIG_STM32H7_SPI2=y
-CONFIG_STM32H7_SPI3=y
-CONFIG_STM32H7_SPI3_DMA=y
-CONFIG_STM32H7_SPI3_DMA_BUFFER=1024
-CONFIG_STM32H7_TIM12=y
-CONFIG_STM32H7_TIM1=y
-CONFIG_STM32H7_TIM4=y
-CONFIG_STM32H7_TIM5=y
-CONFIG_STM32H7_TIM15=y
-CONFIG_STM32H7_TIM3=y
-CONFIG_STM32H7_TIM2=y
-CONFIG_STM32H7_TIM8=y
-CONFIG_STM32H7_TIM17=y
-CONFIG_STM32H7_UART5=y
-CONFIG_STM32H7_UART7=y
-CONFIG_STM32H7_UART8=y
-CONFIG_STM32H7_USART1=y
-CONFIG_STM32H7_USART2=y
-CONFIG_STM32H7_USART3=y
-CONFIG_STM32H7_USART6=y
-CONFIG_STM32H7_USART_BREAKS=y
-CONFIG_STM32H7_USART_INVERT=y
-CONFIG_STM32H7_USART_SINGLEWIRE=y
-CONFIG_STM32H7_USART_SWAP=y
-CONFIG_SYSTEM_CDCACM=y
-CONFIG_SYSTEM_NSH=y
-CONFIG_TASK_NAME_SIZE=24
-CONFIG_UART5_TXBUFSIZE=3000
-CONFIG_UART7_BAUD=57600
-CONFIG_UART7_IFLOWCONTROL=y
-CONFIG_UART7_OFLOWCONTROL=y
-CONFIG_UART7_RXBUFSIZE=600
-CONFIG_UART7_RXDMA=y
-CONFIG_UART7_TXBUFSIZE=3000
-CONFIG_UART7_TXDMA=y
-CONFIG_UART8_BAUD=57600
-CONFIG_UART8_RXBUFSIZE=600
-CONFIG_UART8_TXBUFSIZE=1500
-CONFIG_UART8_SERIAL_CONSOLE=y
-CONFIG_USART1_BAUD=57600
-CONFIG_USART1_RXBUFSIZE=600
-CONFIG_USART1_TXBUFSIZE=1500
-CONFIG_USART2_BAUD=57600
-CONFIG_USART2_RXBUFSIZE=600
-CONFIG_USART2_TXBUFSIZE=3000
-CONFIG_USART3_BAUD=57600
-CONFIG_USART3_RXBUFSIZE=180
-CONFIG_USART3_RXDMA=y
-CONFIG_USART3_TXBUFSIZE=1500
-CONFIG_USART3_TXDMA=y
-CONFIG_USART6_BAUD=57600
-CONFIG_USART6_RXBUFSIZE=600
-CONFIG_USART6_TXBUFSIZE=1500
-CONFIG_USBDEV=y
-CONFIG_USBDEV_BUSPOWERED=y
-CONFIG_USBDEV_MAXPOWER=500
-CONFIG_USEC_PER_TICK=1000
-CONFIG_WATCHDOG=y
-CONFIG_WQUEUE_NOTIFIER=y

boards/holybro/kakuteh7-wing/nuttx-config/scripts/bootloader_script.ld

@@ -1,215 +0,0 @@
-/****************************************************************************
- * scripts/script.ld
- *
- *   Copyright (C) 2016, 2019 Gregory Nutt. All rights reserved.
- *   Author: Gregory Nutt <gnutt@nuttx.org>
- *
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- * 3. Neither the name NuttX nor the names of its contributors may be
- *    used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ****************************************************************************/
-
-/* The KakuteH7 uses an STM32H743VI has 2048Kb of main FLASH memory.
- * The flash memory is partitioned into a User Flash memory and a System
- * Flash memory. Each of these memories has two banks:
- *
- *   1) User Flash memory:
- *
- *      Bank 1: Start address 0x0800:0000 to 0x080F:FFFF with 8 sectors, 128Kb each
- *      Bank 2: Start address 0x0810:0000 to 0x081F:FFFF with 8 sectors, 128Kb each
- *
- *   2) System Flash memory:
- *
- *      Bank 1: Start address 0x1FF0:0000 to 0x1FF1:FFFF with 1 x 128Kb sector
- *      Bank 1: Start address 0x1FF4:0000 to 0x1FF5:FFFF with 1 x 128Kb sector
- *
- *   3) User option bytes for user configuration, only in Bank 1.
- *
- * In the STM32H743VI, two different boot spaces can be selected through
- * the BOOT pin and the boot base address programmed in the BOOT_ADD0 and
- * BOOT_ADD1 option bytes:
- *
- *   1) BOOT=0: Boot address defined by user option byte BOOT_ADD0[15:0].
- *      ST programmed value: Flash memory at 0x0800:0000
- *   2) BOOT=1: Boot address defined by user option byte BOOT_ADD1[15:0].
- *      ST programmed value: System bootloader at 0x1FF0:0000
- *
- * The KakuteH7 has a switch on board, the BOOT0 pin is at ground so by default,
- * the STM32 will boot to address 0x0800:0000 in FLASH unless the switch is
- * depressed, then the boot will be from 0x1FF0:0000
- *
- * The STM32H743VI also has 1024Kb of data SRAM.
- * SRAM is split up into several blocks and into three power domains:
- *
- *   1) TCM SRAMs are dedicated to the Cortex-M7 and are accessible with
- *      0 wait states by the Cortex-M7 and by MDMA through AHBS slave bus
- *
- *      1.1) 128Kb of DTCM-RAM beginning at address 0x2000:0000
- *
- *           The DTCM-RAM is organized as 2 x 64Kb DTCM-RAMs on 2 x 32 bit
- *           DTCM ports. The DTCM-RAM could be used for critical real-time
- *           data, such as interrupt service routines or stack / heap memory.
- *           Both DTCM-RAMs can be used in parallel (for load/store operations)
- *           thanks to the Cortex-M7 dual issue capability.
- *
- *      1.2)  64Kb of ITCM-RAM beginning at address 0x0000:0000
- *
- *           This RAM is connected to ITCM 64-bit interface designed for
- *           execution of critical real-times routines by the CPU.
- *
- *   2) AXI SRAM (D1 domain) accessible by all system masters except BDMA
- *      through D1 domain AXI bus matrix
- *
- *      2.1) 512Kb of SRAM beginning at address 0x2400:0000
- *
- *   3) AHB SRAM (D2 domain) accessible by all system masters except BDMA
- *      through D2 domain AHB bus matrix
- *
- *      3.1) 128Kb of SRAM1 beginning at address 0x3000:0000
- *      3.2) 128Kb of SRAM2 beginning at address 0x3002:0000
- *      3.3)  32Kb of SRAM3 beginning at address 0x3004:0000
- *
- *      SRAM1 - SRAM3 are one contiguous block: 288Kb at address 0x3000:0000
- *
- *   4) AHB SRAM (D3 domain) accessible by most of system masters
- *      through D3 domain AHB bus matrix
- *
- *      4.1)  64Kb of SRAM4 beginning at address 0x3800:0000
- *      4.1)   4Kb of backup RAM beginning at address 0x3880:0000
- *
- * When booting from FLASH, FLASH memory is aliased to address 0x0000:0000
- * where the code expects to begin execution by jumping to the entry point in
- * the 0x0800:0000 address range.
- *
- * The bootloader uses the first sector of the flash, which is 128K in length.
- */
-
-MEMORY
-{
-	itcm  (rwx) : ORIGIN = 0x00000000, LENGTH =   64K
-	flash (rx)  : ORIGIN = 0x08000000, LENGTH =  128K
-	dtcm1 (rwx) : ORIGIN = 0x20000000, LENGTH =   64K
-	dtcm2 (rwx) : ORIGIN = 0x20010000, LENGTH =   64K
-	sram  (rwx) : ORIGIN = 0x24000000, LENGTH =  512K
-	sram1 (rwx) : ORIGIN = 0x30000000, LENGTH =  128K
-	sram2 (rwx) : ORIGIN = 0x30020000, LENGTH =  128K
-	sram3 (rwx) : ORIGIN = 0x30040000, LENGTH =   32K
-	sram4 (rwx) : ORIGIN = 0x38000000, LENGTH =   64K
-	bbram (rwx) : ORIGIN = 0x38800000, LENGTH =    4K
-}
-
-OUTPUT_ARCH(arm)
-EXTERN(_vectors)
-ENTRY(_stext)
-
-/*
- * Ensure that abort() is present in the final object.  The exception handling
- * code pulled in by libgcc.a requires it (and that code cannot be easily avoided).
- */
-EXTERN(abort)
-EXTERN(_bootdelay_signature)
-
-SECTIONS
-{
-	.text : {
-		_stext = ABSOLUTE(.);
-		*(.vectors)
-		. = ALIGN(32);
-		/*
-		This signature provides the bootloader with a way to delay booting
-		*/
-		_bootdelay_signature = ABSOLUTE(.);
-		FILL(0xffecc2925d7d05c5)
-		. += 8;
-		*(.text .text.*)
-		*(.fixup)
-		*(.gnu.warning)
-		*(.rodata .rodata.*)
-		*(.gnu.linkonce.t.*)
-		*(.glue_7)
-		*(.glue_7t)
-		*(.got)
-		*(.gcc_except_table)
-		*(.gnu.linkonce.r.*)
-		_etext = ABSOLUTE(.);
-
-	} > flash
-
-	/*
-	 * Init functions (static constructors and the like)
-	 */
-	.init_section : {
-		_sinit = ABSOLUTE(.);
-		KEEP(*(.init_array .init_array.*))
-		_einit = ABSOLUTE(.);
-	} > flash
-
-
-	.ARM.extab : {
-		*(.ARM.extab*)
-	} > flash
-
-	__exidx_start = ABSOLUTE(.);
-	.ARM.exidx : {
-		*(.ARM.exidx*)
-	} > flash
-	__exidx_end = ABSOLUTE(.);
-
-	_eronly = ABSOLUTE(.);
-
-	.data : {
-		_sdata = ABSOLUTE(.);
-		*(.data .data.*)
-		*(.gnu.linkonce.d.*)
-		CONSTRUCTORS
-		_edata = ABSOLUTE(.);
-	} > sram AT > flash
-
-	.bss : {
-		_sbss = ABSOLUTE(.);
-		*(.bss .bss.*)
-		*(.gnu.linkonce.b.*)
-		*(COMMON)
-		. = ALIGN(4);
-		_ebss = ABSOLUTE(.);
-	} > sram
-
-	/* Stabs debugging sections. */
-	.stab 0 : { *(.stab) }
-	.stabstr 0 : { *(.stabstr) }
-	.stab.excl 0 : { *(.stab.excl) }
-	.stab.exclstr 0 : { *(.stab.exclstr) }
-	.stab.index 0 : { *(.stab.index) }
-	.stab.indexstr 0 : { *(.stab.indexstr) }
-	.comment 0 : { *(.comment) }
-	.debug_abbrev 0 : { *(.debug_abbrev) }
-	.debug_info 0 : { *(.debug_info) }
-	.debug_line 0 : { *(.debug_line) }
-	.debug_pubnames 0 : { *(.debug_pubnames) }
-	.debug_aranges 0 : { *(.debug_aranges) }
-}

boards/holybro/kakuteh7-wing/nuttx-config/scripts/script.ld

@@ -1,228 +0,0 @@
-/****************************************************************************
- * scripts/script.ld
- *
- *   Copyright (C) 2016, 2019 Gregory Nutt. All rights reserved.
- *   Author: Gregory Nutt <gnutt@nuttx.org>
- *
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- * 3. Neither the name NuttX nor the names of its contributors may be
- *    used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ****************************************************************************/
-
-/* The KakuteH7 uses an STM32H743VI has 2048Kb of main FLASH memory.
- * The flash memory is partitioned into a User Flash memory and a System
- * Flash memory. Each of these memories has two banks:
- *
- *   1) User Flash memory:
- *
- *      Bank 1: Start address 0x0800:0000 to 0x080F:FFFF with 8 sectors, 128Kb each
- *      Bank 2: Start address 0x0810:0000 to 0x081F:FFFF with 8 sectors, 128Kb each
- *
- *   2) System Flash memory:
- *
- *      Bank 1: Start address 0x1FF0:0000 to 0x1FF1:FFFF with 1 x 128Kb sector
- *      Bank 1: Start address 0x1FF4:0000 to 0x1FF5:FFFF with 1 x 128Kb sector
- *
- *   3) User option bytes for user configuration, only in Bank 1.
- *
- * In the STM32H743VI, two different boot spaces can be selected through
- * the BOOT pin and the boot base address programmed in the BOOT_ADD0 and
- * BOOT_ADD1 option bytes:
- *
- *   1) BOOT=0: Boot address defined by user option byte BOOT_ADD0[15:0].
- *      ST programmed value: Flash memory at 0x0800:0000
- *   2) BOOT=1: Boot address defined by user option byte BOOT_ADD1[15:0].
- *      ST programmed value: System bootloader at 0x1FF0:0000
- *
- * The KakuteH7 has a switch on board, the BOOT0 pin is at ground so by default,
- * the STM32 will boot to address 0x0800:0000 in FLASH unless the switch is
- * depressed, then the boot will be from 0x1FF0:0000
- *
- * The STM32H743VI also has 1024Kb of data SRAM.
- * SRAM is split up into several blocks and into three power domains:
- *
- *   1) TCM SRAMs are dedicated to the Cortex-M7 and are accessible with
- *      0 wait states by the Cortex-M7 and by MDMA through AHBS slave bus
- *
- *      1.1) 128Kb of DTCM-RAM beginning at address 0x2000:0000
- *
- *           The DTCM-RAM is organized as 2 x 64Kb DTCM-RAMs on 2 x 32 bit
- *           DTCM ports. The DTCM-RAM could be used for critical real-time
- *           data, such as interrupt service routines or stack / heap memory.
- *           Both DTCM-RAMs can be used in parallel (for load/store operations)
- *           thanks to the Cortex-M7 dual issue capability.
- *
- *      1.2)  64Kb of ITCM-RAM beginning at address 0x0000:0000
- *
- *           This RAM is connected to ITCM 64-bit interface designed for
- *           execution of critical real-times routines by the CPU.
- *
- *   2) AXI SRAM (D1 domain) accessible by all system masters except BDMA
- *      through D1 domain AXI bus matrix
- *
- *      2.1) 512Kb of SRAM beginning at address 0x2400:0000
- *
- *   3) AHB SRAM (D2 domain) accessible by all system masters except BDMA
- *      through D2 domain AHB bus matrix
- *
- *      3.1) 128Kb of SRAM1 beginning at address 0x3000:0000
- *      3.2) 128Kb of SRAM2 beginning at address 0x3002:0000
- *      3.3)  32Kb of SRAM3 beginning at address 0x3004:0000
- *
- *      SRAM1 - SRAM3 are one contiguous block: 288Kb at address 0x3000:0000
- *
- *   4) AHB SRAM (D3 domain) accessible by most of system masters
- *      through D3 domain AHB bus matrix
- *
- *      4.1)  64Kb of SRAM4 beginning at address 0x3800:0000
- *      4.1)   4Kb of backup RAM beginning at address 0x3880:0000
- *
- * When booting from FLASH, FLASH memory is aliased to address 0x0000:0000
- * where the code expects to begin execution by jumping to the entry point in
- * the 0x0800:0000 address range.
- */
-
-MEMORY
-{
-	ITCM_RAM  (rwx) : ORIGIN = 0x00000000, LENGTH =   64K
-	FLASH      (rx) : ORIGIN = 0x08020000, LENGTH = 1664K /* params in last two sectors */
-
-	DTCM1_RAM (rwx) : ORIGIN = 0x20000000, LENGTH =   64K
-	DTCM2_RAM (rwx) : ORIGIN = 0x20010000, LENGTH =   64K
-	AXI_SRAM  (rwx) : ORIGIN = 0x24000000, LENGTH =  512K /* D1 domain AXI bus */
-	SRAM1     (rwx) : ORIGIN = 0x30000000, LENGTH =  128K /* D2 domain AHB bus */
-	SRAM2     (rwx) : ORIGIN = 0x30020000, LENGTH =  128K /* D2 domain AHB bus */
-	SRAM3     (rwx) : ORIGIN = 0x30040000, LENGTH =   32K /* D2 domain AHB bus */
-	SRAM4     (rwx) : ORIGIN = 0x38000000, LENGTH =   64K /* D3 domain */
-	BKPRAM    (rwx) : ORIGIN = 0x38800000, LENGTH =    4K
-}
-
-OUTPUT_ARCH(arm)
-EXTERN(_vectors)
-ENTRY(_stext)
-
-/*
- * Ensure that abort() is present in the final object.  The exception handling
- * code pulled in by libgcc.a requires it (and that code cannot be easily avoided).
- */
-EXTERN(abort)
-EXTERN(_bootdelay_signature)
-
-SECTIONS
-{
-	.text : {
-		_stext = ABSOLUTE(.);
-		*(.vectors)
-		. = ALIGN(32);
-		/*
-		This signature provides the bootloader with a way to delay booting
-		*/
-		_bootdelay_signature = ABSOLUTE(.);
-		FILL(0xffecc2925d7d05c5)
-		. += 8;
-		*(.text .text.*)
-		*(.fixup)
-		*(.gnu.warning)
-		*(.rodata .rodata.*)
-		*(.gnu.linkonce.t.*)
-		*(.glue_7)
-		*(.glue_7t)
-		*(.got)
-		*(.gcc_except_table)
-		*(.gnu.linkonce.r.*)
-		_etext = ABSOLUTE(.);
-
-	} > FLASH
-
-	/*
-	 * Init functions (static constructors and the like)
-	 */
-	.init_section : {
-		_sinit = ABSOLUTE(.);
-		KEEP(*(.init_array .init_array.*))
-		_einit = ABSOLUTE(.);
-	} > FLASH
-
-
-	.ARM.extab : {
-		*(.ARM.extab*)
-	} > FLASH
-
-	__exidx_start = ABSOLUTE(.);
-	.ARM.exidx : {
-		*(.ARM.exidx*)
-	} > FLASH
-	__exidx_end = ABSOLUTE(.);
-
-	_eronly = ABSOLUTE(.);
-
-	.data : {
-		_sdata = ABSOLUTE(.);
-		*(.data .data.*)
-		*(.gnu.linkonce.d.*)
-		CONSTRUCTORS
-		_edata = ABSOLUTE(.);
-
-		/* Pad out last section as the STM32H7 Flash write size is 256 bits. 32 bytes */
-		. = ALIGN(16);
-		FILL(0xffff)
-		. += 16;
-	} > AXI_SRAM AT > FLASH  = 0xffff
-
-	.bss : {
-		_sbss = ABSOLUTE(.);
-		*(.bss .bss.*)
-		*(.gnu.linkonce.b.*)
-		*(COMMON)
-		. = ALIGN(4);
-		_ebss = ABSOLUTE(.);
-	} > AXI_SRAM
-
-	/* Emit the the D3 power domain section for locating BDMA data */
-
-	.sram4_reserve (NOLOAD) :
-	{
-		*(.sram4)
-		. = ALIGN(4);
-		_sram4_heap_start = ABSOLUTE(.);
-	} > SRAM4
-
-	/* Stabs debugging sections. */
-	.stab 0 : { *(.stab) }
-	.stabstr 0 : { *(.stabstr) }
-	.stab.excl 0 : { *(.stab.excl) }
-	.stab.exclstr 0 : { *(.stab.exclstr) }
-	.stab.index 0 : { *(.stab.index) }
-	.stab.indexstr 0 : { *(.stab.indexstr) }
-	.comment 0 : { *(.comment) }
-	.debug_abbrev 0 : { *(.debug_abbrev) }
-	.debug_info 0 : { *(.debug_info) }
-	.debug_line 0 : { *(.debug_line) }
-	.debug_pubnames 0 : { *(.debug_pubnames) }
-	.debug_aranges 0 : { *(.debug_aranges) }
-}

boards/holybro/kakuteh7-wing/src/CMakeLists.txt

@@ -1,74 +0,0 @@
-############################################################################
-#
-#   Copyright (c) 2016 PX4 Development Team. All rights reserved.
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions
-# are met:
-#
-# 1. Redistributions of source code must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-# 2. Redistributions in binary form must reproduce the above copyright
-#    notice, this list of conditions and the following disclaimer in
-#    the documentation and/or other materials provided with the
-#    distribution.
-# 3. Neither the name PX4 nor the names of its contributors may be
-#    used to endorse or promote products derived from this software
-#    without specific prior written permission.
-#
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
-# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
-# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
-# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
-# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
-# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
-# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
-# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-# POSSIBILITY OF SUCH DAMAGE.
-#
-############################################################################
-if("${PX4_BOARD_LABEL}" STREQUAL  "bootloader")
-	add_compile_definitions(BOOTLOADER)
-	add_library(drivers_board
-		bootloader_main.c
-		init.c
-		usb.c
-		timer_config.cpp
-	)
-	target_link_libraries(drivers_board
-		PRIVATE
-			nuttx_arch # sdio
-			nuttx_drivers # sdio
-			px4_layer #gpio
-			arch_io_pins # iotimer
-			bootloader
-	)
-	target_include_directories(drivers_board PRIVATE ${PX4_SOURCE_DIR}/platforms/nuttx/src/bootloader/common)
-
-else()
-	add_library(drivers_board
-		can.c
-		i2c.cpp
-		init.c
-		led.c
-		sdio.c
-		spi.cpp
-		timer_config.cpp
-		usb.c
-	)
-	add_dependencies(drivers_board arch_board_hw_info)
-
-	target_link_libraries(drivers_board
-		PRIVATE
-			arch_io_pins
-			arch_spi
-			arch_board_hw_info
-			drivers__led # drv_led_start
-			nuttx_arch # sdio
-			nuttx_drivers # sdio
-			px4_layer
-	)
-endif()

boards/holybro/kakuteh7-wing/src/board_config.h

@@ -1,273 +0,0 @@
-/****************************************************************************
- *
- *   Copyright (c) 2022 PX4 Development Team. All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- * 3. Neither the name PX4 nor the names of its contributors may be
- *    used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ****************************************************************************/
-
-/**
- * @file board_config.h
- *
- * PX4FMU-v6c internal definitions
- */
-
-#pragma once
-
-/****************************************************************************************************
- * Included Files
- ****************************************************************************************************/
-
-#include <px4_platform_common/px4_config.h>
-#include <nuttx/compiler.h>
-#include <stdint.h>
-
-
-#include <stm32_gpio.h>
-
-/****************************************************************************************************
- * Definitions
- ****************************************************************************************************/
-
-#undef TRACE_PINS
-
-/* PX4FMU GPIOs ***********************************************************************************/
-
-
-/* LEDs are driven with push pull Anodes to 3.3V */
-
-#define GPIO_nLED_RED        /* PC14 */  (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_50MHz|GPIO_OUTPUT_SET|GPIO_PORTC|GPIO_PIN14)
-#define GPIO_nLED_BLUE       /* PC15 */  (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_50MHz|GPIO_OUTPUT_SET|GPIO_PORTC|GPIO_PIN15)
-
-#define BOARD_HAS_CONTROL_STATUS_LEDS      1
-#define BOARD_OVERLOAD_LED     LED_RED
-#define BOARD_ARMED_STATE_LED  LED_BLUE
-
-/*
- * ADC channels
- *
- * These are the channel numbers of the ADCs of the microcontroller that
- * can be used by the Px4 Firmware in the adc driver
- */
-
-/* ADC defines to be used in sensors.cpp to read from a particular channel */
-
-#define ADC1_CH(n)                  (n)
-
-/* N.B. there is no offset mapping needed for ADC3 because */
-#define ADC3_CH(n)                  (n)
-
-/* We are only use ADC3 for REV/VER. */
-
-/* Define GPIO pins used as ADC N.B. Channel numbers must match below  */
-
-#define PX4_ADC_GPIO  \
-	/* PC4  */  GPIO_ADC12_INP4, \
-	/* PC5  */  GPIO_ADC12_INP8, \
-	/* PA2  */  GPIO_ADC12_INP14, \
-	/* PA3  */  GPIO_ADC12_INP15, \
-	/* PA4  */  GPIO_ADC12_INP18, \
-	/* PC0  */  GPIO_ADC123_INP10 \
-
-/* Define Channel numbers must match above GPIO pin IN(n)*/
-#define ADC_BATTERY1_CURRENT_CHANNEL            /* PC4 */  ADC1_CH(4)
-#define ADC_BATTERY1_VOLTAGE_CHANNEL            /* PC5 */  ADC1_CH(8)
-#define ADC_BATTERY2_CURRENT_CHANNEL            /* PA2 */  ADC1_CH(14)
-#define ADC_BATTERY2_VOLTAGE_CHANNEL            /* PA3 */  ADC1_CH(15)
-#define ADC_SCALED_V5_CHANNEL                   /* PA4 */  ADC1_CH(18)
-#define ADC_RSSI_IN_CHANNEL                     /* PC0  */  ADC3_CH(10)
-
-#define ADC_CHANNELS \
-	((1 << ADC_BATTERY1_CURRENT_CHANNEL) | \
-	 (1 << ADC_BATTERY1_VOLTAGE_CHANNEL) | \
-	 (1 << ADC_BATTERY2_CURRENT_CHANNEL) | \
-	 (1 << ADC_BATTERY2_VOLTAGE_CHANNEL) | \
-	 (1 << ADC_SCALED_V5_CHANNEL) | \
-	 (1 << ADC_RSSI_IN_CHANNEL       ))
-
-#define SYSTEM_ADC_BASE STM32_ADC1_BASE
-
-#define BOARD_NUMBER_BRICKS 2
-
-#define GPIO_nVDD_BRICK1_VALID          (1) /* Brick 1 Is Chosen */
-#define GPIO_nVDD_BRICK2_VALID          (0) /* Brick 2 Is Chosen  */
-
-/*
- * PWM
- */
-#define DIRECT_PWM_OUTPUT_CHANNELS 14
-#define BOARD_NUM_IO_TIMERS 6
-
-/*
- * UAVCAN
- */
-#define UAVCAN_NUM_IFACES_RUNTIME  1
-
-#define GPIO_VDD_3V3_SENSORS_EN         /* PB2  */ (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_SET|GPIO_PORTB|GPIO_PIN2)
-
-#define GPIO_VTX_9V_EN                  /* PE3  */ (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_SET|GPIO_PORTE|GPIO_PIN3)
-
-#define GPIO_CAM_SWITCH                 /* PC13 */ (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTC|GPIO_PIN13)
-
-/* Define True logic Power Control in arch agnostic form */
-
-#define VDD_3V3_SENSORS_EN(on_true)       px4_arch_gpiowrite(GPIO_VDD_3V3_SENSORS_EN, (on_true))
-
-#define VTX_9V_EN(on_true)                px4_arch_gpiowrite(GPIO_VTX_9V_EN, (on_true))
-
-#define CAM_SWITCH_CAM1                   px4_arch_gpiowrite(GPIO_CAM_SWITCH, false) // low is CAM1
-#define CAM_SWITCH_CAM2                   px4_arch_gpiowrite(GPIO_CAM_SWITCH, true)  // high is CAM2
-
-/* Tone alarm output */
-
-#define TONE_ALARM_TIMER        17  /* Timer 17 */
-#define TONE_ALARM_CHANNEL      1  /* PB9 GPIO_TIM4_CH4OUT_1 */
-
-#define GPIO_BUZZER_1           /* PB9 */ (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTB|GPIO_PIN9)
-
-#define GPIO_TONE_ALARM_IDLE    GPIO_BUZZER_1
-#define GPIO_TONE_ALARM        GPIO_TIM17_CH1OUT_1
-
-/* USB OTG FS
- *
- * PA9  OTG_FS_VBUS VBUS sensing
- */
-#define GPIO_OTGFS_VBUS         /* PA9 */ (GPIO_INPUT|GPIO_PULLDOWN|GPIO_SPEED_100MHz|GPIO_PORTA|GPIO_PIN9)
-
-/* High-resolution timer */
-#define HRT_TIMER               8  /* use timer8 for the HRT */
-#define HRT_TIMER_CHANNEL       3  /* use capture/compare channel 3 */
-
-/* PWM input driver */
-//#define PWMIN_TIMER                       8
-//#define PWMIN_TIMER_CHANNEL    /* TIM8CH2 */ 2
-//#define GPIO_PWM_IN            /* PC7 */ GPIO_TIM8_CH2IN_1
-
-#define HRT_PPM_CHANNEL         /* TIM8CH2 */  2  /* use capture/compare channel 2 */
-#define GPIO_PPM_IN             /* PC7 */ GPIO_TIM8_CH2IN_1
-
-#define RC_SERIAL_PORT                     "/dev/ttyS4" // USART6
-#define RC_SERIAL_PORT_SHARED_PPM_PIN_GPIO_RX             GPIO_USART6_RX
-
-#define SDIO_SLOTNO                    0  /* Only one slot */
-#define SDIO_MINOR                     0
-
-/* SD card bringup does not work if performed on the IDLE thread because it
- * will cause waiting.  Use either:
- *
- *  CONFIG_BOARDCTL=y, OR
- *  CONFIG_BOARD_INITIALIZE=y && CONFIG_BOARD_INITTHREAD=y
- */
-
-#if defined(CONFIG_BOARD_INITIALIZE) && !defined(CONFIG_BOARDCTL) && \
-   !defined(CONFIG_BOARD_INITTHREAD)
-#  warning SDIO initialization cannot be perfomed on the IDLE thread
-#endif
-
-/* By Providing BOARD_ADC_USB_CONNECTED (using the px4_arch abstraction)
- * this board support the ADC system_power interface, and therefore
- * provides the true logic GPIO BOARD_ADC_xxxx macros.
- */
-#define BOARD_ADC_USB_CONNECTED (px4_arch_gpioread(GPIO_OTGFS_VBUS))
-
-
-#define BOARD_ADC_SERVO_VALID     (1)
-
-#define BOARD_ADC_BRICK1_VALID  (1)
-#define BOARD_ADC_BRICK2_VALID  (1)
-
-#define BOARD_ADC_SERVO_VALID   (1)
-
-
-/* This board provides a DMA pool and APIs */
-#define BOARD_DMA_ALLOC_POOL_SIZE 5120
-
-/* This board provides the board_on_reset interface */
-
-#define BOARD_HAS_ON_RESET 1
-
-#define PX4_GPIO_INIT_LIST { \
-		PX4_ADC_GPIO,                     \
-		GPIO_CAN1_TX,                     \
-		GPIO_CAN1_RX,                     \
-		GPIO_VDD_3V3_SENSORS_EN,          \
-		GPIO_TONE_ALARM_IDLE,             \
-		GPIO_PPM_IN,                      \
-		GPIO_VTX_9V_EN,                   \
-		GPIO_CAM_SWITCH,                  \
-	}
-
-#define BOARD_ENABLE_CONSOLE_BUFFER
-
-#define FLASH_BASED_PARAMS
-
-__BEGIN_DECLS
-
-/****************************************************************************************************
- * Public Types
- ****************************************************************************************************/
-
-/****************************************************************************************************
- * Public data
- ****************************************************************************************************/
-
-#ifndef __ASSEMBLY__
-
-/****************************************************************************************************
- * Public Functions
- ****************************************************************************************************/
-
-/****************************************************************************
- * Name: stm32_sdio_initialize
- *
- * Description:
- *   Initialize SDIO-based MMC/SD card support
- *
- ****************************************************************************/
-
-int stm32_sdio_initialize(void);
-
-/****************************************************************************************************
- * Name: stm32_spiinitialize
- *
- * Description:
- *   Called to configure SPI chip select GPIO pins for the PX4FMU board.
- *
- ****************************************************************************************************/
-
-extern void stm32_spiinitialize(void);
-
-extern void stm32_usbinitialize(void);
-
-extern void board_peripheral_reset(int ms);
-
-#include <px4_platform_common/board_common.h>
-
-#endif /* __ASSEMBLY__ */
-
-__END_DECLS

boards/holybro/kakuteh7-wing/src/bootloader_main.c

@@ -1,75 +0,0 @@
-/****************************************************************************
- *
- *   Copyright (c) 2019-2021 PX4 Development Team. All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- * 3. Neither the name PX4 nor the names of its contributors may be
- *    used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ****************************************************************************/
-
-/**
- * @file bootloader_main.c
- *
- * FMU-specific early startup code for bootloader
-*/
-
-#include "board_config.h"
-#include "bl.h"
-
-#include <nuttx/config.h>
-#include <nuttx/board.h>
-#include <chip.h>
-#include <stm32_uart.h>
-#include <arch/board/board.h>
-#include "arm_internal.h"
-#include <px4_platform_common/init.h>
-
-extern int sercon_main(int c, char **argv);
-
-__EXPORT void board_on_reset(int status) {}
-
-__EXPORT void stm32_boardinitialize(void)
-{
-	/* configure USB interfaces */
-	stm32_usbinitialize();
-}
-
-__EXPORT int board_app_initialize(uintptr_t arg)
-{
-	return 0;
-}
-
-void board_late_initialize(void)
-{
-	sercon_main(0, NULL);
-}
-
-extern void sys_tick_handler(void);
-void board_timerhook(void)
-{
-	sys_tick_handler();
-}

boards/holybro/kakuteh7-wing/src/can.c

@@ -1,132 +0,0 @@
-/****************************************************************************
- *
- *   Copyright (C) 2012 PX4 Development Team. All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- * 3. Neither the name PX4 nor the names of its contributors may be
- *    used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ****************************************************************************/
-
-/**
- * @file can.c
- *
- * Board-specific CAN functions.
- */
-
-#include <errno.h>
-#include <debug.h>
-
-#include <nuttx/can/can.h>
-#include <arch/board/board.h>
-
-
-#if !defined(CONFIG_CAN)
-__EXPORT
-uint16_t board_get_can_interfaces(void)
-{
-	return 0x1;
-}
-
-#else
-
-#include "chip.h"
-#include "arm_internal.h"
-
-#include "chip.h"
-#include "stm32_can.h"
-#include "board_config.h"
-
-/************************************************************************************
- * Pre-processor Definitions
- ************************************************************************************/
-/* Configuration ********************************************************************/
-
-#if defined(CONFIG_STM32_CAN1) && defined(CONFIG_STM32_CAN2)
-#  warning "Both CAN1 and CAN2 are enabled.  Assuming only CAN1."
-#  undef CONFIG_STM32_CAN2
-#endif
-
-#ifdef CONFIG_STM32_CAN1
-#  define CAN_PORT 1
-#else
-#  define CAN_PORT 2
-#endif
-
-/************************************************************************************
- * Private Functions
- ************************************************************************************/
-
-/************************************************************************************
- * Public Functions
- ************************************************************************************/
-int can_devinit(void);
-
-/************************************************************************************
- * Name: can_devinit
- *
- * Description:
- *   All STM32 architectures must provide the following interface to work with
- *   examples/can.
- *
- ************************************************************************************/
-
-int can_devinit(void)
-{
-	static bool initialized = false;
-	struct can_dev_s *can;
-	int ret;
-
-	/* Check if we have already initialized */
-
-	if (!initialized) {
-		/* Call stm32_caninitialize() to get an instance of the CAN interface */
-
-		can = stm32_caninitialize(CAN_PORT);
-
-		if (can == NULL) {
-			canerr("ERROR:  Failed to get CAN interface\n");
-			return -ENODEV;
-		}
-
-		/* Register the CAN driver at "/dev/can0" */
-
-		ret = can_register("/dev/can0", can);
-
-		if (ret < 0) {
-			canerr("ERROR: can_register failed: %d\n", ret);
-			return ret;
-		}
-
-		/* Now we are initialized */
-
-		initialized = true;
-	}
-
-	return OK;
-}
-
-#endif

boards/holybro/kakuteh7-wing/src/hw_config.h

@@ -1,128 +0,0 @@
-/*
- * hw_config.h
- *
- *  Created on: May 17, 2015
- *      Author: david_s5
- */
-
-#ifndef HW_CONFIG_H_
-#define HW_CONFIG_H_
-
-/****************************************************************************
- * 10-8--2016:
- *  To simplify the ripple effect on the tools, we will be using
- *  /dev/serial/by-id/<asterisk>PX4<asterisk> to locate PX4 devices. Therefore
- *  moving forward all Bootloaders must contain the prefix "PX4 BL "
- *  in the USBDEVICESTRING
- *  This Change will be made in an upcoming BL release
- ****************************************************************************/
-/*
- * Define usage to configure a bootloader
- *
- *
- * Constant                example          Usage
- * APP_LOAD_ADDRESS     0x08004000            - The address in Linker Script, where the app fw is org-ed
- * BOOTLOADER_DELAY     5000                  - Ms to wait while under USB pwr or bootloader request
- * BOARD_FMUV2
- * INTERFACE_USB        1                     - (Optional) Scan and use the USB interface for bootloading
- * INTERFACE_USART      1                     - (Optional) Scan and use the Serial interface for bootloading
- * USBDEVICESTRING      "PX4 BL FMU v2.x"     - USB id string
- * USBPRODUCTID         0x0011                - PID Should match defconfig
- * BOOT_DELAY_ADDRESS   0x000001a0            - (Optional) From the linker script from Linker Script to get a custom
- *                                               delay provided by an APP FW
- * BOARD_TYPE           9                     - Must match .prototype boad_id
- * _FLASH_KBYTES        (*(uint16_t *)0x1fff7a22) - Run time flash size detection
- * BOARD_FLASH_SECTORS  ((_FLASH_KBYTES == 0x400) ? 11 : 23) - Run time determine the physical last sector
- * BOARD_FLASH_SECTORS   11                   - Hard coded zero based last sector
- * BOARD_FLASH_SIZE     (_FLASH_KBYTES*1024)-   Total Flash size of device, determined at run time.
- *                         (1024 * 1024)      - Hard coded Total Flash of device - The bootloader and app reserved will be deducted
- *                                              programmatically
- *
- * BOARD_FIRST_FLASH_SECTOR_TO_ERASE  2        - Optional sectors index in the flash_sectors table  (F4 only), to begin erasing.
- *                                               This is to allow sectors to be reserved for app fw usage. That will NOT be erased
- *                                               during a FW upgrade.
- *                                               The default is 0, and selects the first sector to be erased, as the 0th entry in the
- *                                               flash_sectors table. Which is the second physical sector of FLASH in the device.
- *                                               The first physical sector of FLASH is used by the bootloader, and is not defined
- *                                               in the table.
- *
- * APP_RESERVATION_SIZE (BOARD_FIRST_FLASH_SECTOR_TO_ERASE * 16 * 1024) - Number of bytes reserved by the APP FW. This number plus
- *                                                                        BOOTLOADER_RESERVATION_SIZE  will be deducted from
- *                                                                        BOARD_FLASH_SIZE to determine the size of the App FW
- *                                                                        and hence the address space of FLASH to erase and program.
- * USBMFGSTRING            "PX4 AP"            - Optional USB MFG string (default is '3D Robotics' if not defined.)
- * SERIAL_BREAK_DETECT_DISABLED                -  Optional prevent break selection on Serial port from entering or staying in BL
- *
- * * Other defines are somewhat self explanatory.
- */
-
-/* Boot device selection list*/
-#define USB0_DEV       0x01
-#define SERIAL0_DEV    0x02
-#define SERIAL1_DEV    0x04
-
-#define APP_LOAD_ADDRESS               0x08020000
-#define BOOTLOADER_DELAY               5000
-#define INTERFACE_USB                  1
-#define INTERFACE_USB_CONFIG           "/dev/ttyACM0"
-#define BOARD_VBUS                     MK_GPIO_INPUT(GPIO_OTGFS_VBUS)
-
-//#define USE_VBUS_PULL_DOWN
-#define INTERFACE_USART                1
-#define INTERFACE_USART_CONFIG         "/dev/ttyS0,115200"
-#define BOOT_DELAY_ADDRESS             0x000001a0
-#define BOARD_TYPE                     1105
-#define BOARD_FLASH_SECTORS            (14)
-#define BOARD_FLASH_SIZE               (16 * 128 * 1024)
-#define APP_RESERVATION_SIZE           (2 * 128 * 1024)
-
-#define OSC_FREQ                       16
-
-#define BOARD_PIN_LED_ACTIVITY         GPIO_nLED_BLUE // BLUE
-#define BOARD_PIN_LED_BOOTLOADER       GPIO_nLED_RED // RED
-#define BOARD_LED_ON                   0
-#define BOARD_LED_OFF                  1
-
-#define SERIAL_BREAK_DETECT_DISABLED   1
-
-/*
- * Uncommenting this allows to force the bootloader through
- * a PWM output pin. As this can accidentally initialize
- * an ESC prematurely, it is not recommended. This feature
- * has not been used and hence defaults now to off.
- *
- * # define BOARD_FORCE_BL_PIN_OUT         (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_SET|GPIO_PORTE|GPIO_PIN14)
- * # define BOARD_FORCE_BL_PIN_IN          (GPIO_INPUT|GPIO_PULLUP|GPIO_PORTE|GPIO_PIN11)
- *
- * # define BOARD_POWER_PIN_OUT           (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_SET|GPIO_PORTA|GPIO_PIN4)
- * # define BOARD_POWER_ON                 1
- * # define BOARD_POWER_OFF                0
- * # undef  BOARD_POWER_PIN_RELEASE        // Leave pin enabling Power - un comment to release (disable power)
- *
-*/
-
-#if !defined(ARCH_SN_MAX_LENGTH)
-# define ARCH_SN_MAX_LENGTH 12
-#endif
-
-#if !defined(APP_RESERVATION_SIZE)
-#  define APP_RESERVATION_SIZE 0
-#endif
-
-#if !defined(BOARD_FIRST_FLASH_SECTOR_TO_ERASE)
-#  define BOARD_FIRST_FLASH_SECTOR_TO_ERASE 1
-#endif
-
-#if !defined(USB_DATA_ALIGN)
-# define USB_DATA_ALIGN
-#endif
-
-#ifndef BOOT_DEVICES_SELECTION
-#  define BOOT_DEVICES_SELECTION USB0_DEV|SERIAL0_DEV|SERIAL1_DEV
-#endif
-
-#ifndef BOOT_DEVICES_FILTER_ONUSB
-#  define BOOT_DEVICES_FILTER_ONUSB USB0_DEV|SERIAL0_DEV|SERIAL1_DEV
-#endif
-
-#endif /* HW_CONFIG_H_ */

boards/holybro/kakuteh7-wing/src/i2c.cpp

@@ -1,43 +0,0 @@
-/****************************************************************************
- *
- *   Copyright (C) 2020 PX4 Development Team. All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- * 3. Neither the name PX4 nor the names of its contributors may be
- *    used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ****************************************************************************/
-
-#include <px4_arch/i2c_hw_description.h>
-
-#include <lib/drivers/device/Device.hpp>
-#include <px4_platform_common/i2c.h>
-
-constexpr px4_i2c_bus_t px4_i2c_buses[I2C_BUS_MAX_BUS_ITEMS] = {
-	initI2CBusExternal(1),
-	initI2CBusExternal(2),
-	initI2CBusInternal(4),
-};

boards/holybro/kakuteh7-wing/src/init.c

@@ -1,273 +0,0 @@
-/****************************************************************************
- *
- *   Copyright (c) 2012-2022 PX4 Development Team. All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- * 3. Neither the name PX4 nor the names of its contributors may be
- *    used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ****************************************************************************/
-
-/**
- * @file init.c
- *
- * PX4FMU-specific early startup code.  This file implements the
- * board_app_initialize() function that is called early by nsh during startup.
- *
- * Code here is run before the rcS script is invoked; it should start required
- * subsystems and perform board-specific initialization.
- */
-
-/****************************************************************************
- * Included Files
- ****************************************************************************/
-
-#include "board_config.h"
-
-#include <stdbool.h>
-#include <stdio.h>
-#include <string.h>
-#include <debug.h>
-#include <errno.h>
-#include <syslog.h>
-
-#include <nuttx/config.h>
-#include <nuttx/board.h>
-#include <nuttx/spi/spi.h>
-#include <nuttx/sdio.h>
-#include <nuttx/mmcsd.h>
-#include <nuttx/analog/adc.h>
-#include <nuttx/mm/gran.h>
-#include <chip.h>
-#include <stm32_uart.h>
-#include <arch/board/board.h>
-#include "arm_internal.h"
-
-#include <drivers/drv_hrt.h>
-#include <drivers/drv_board_led.h>
-#include <systemlib/px4_macros.h>
-#include <px4_arch/io_timer.h>
-#include <px4_platform_common/init.h>
-#include <px4_platform/gpio.h>
-#include <px4_platform/board_determine_hw_info.h>
-#include <px4_platform/board_dma_alloc.h>
-
-# if defined(FLASH_BASED_PARAMS)
-#  include <parameters/flashparams/flashfs.h>
-#endif
-
-
-/****************************************************************************
- * Pre-Processor Definitions
- ****************************************************************************/
-
-/* Configuration ************************************************************/
-
-/*
- * Ideally we'd be able to get these from arm_internal.h,
- * but since we want to be able to disable the NuttX use
- * of leds for system indication at will and there is no
- * separate switch, we need to build independent of the
- * CONFIG_ARCH_LEDS configuration switch.
- */
-__BEGIN_DECLS
-extern void led_init(void);
-extern void led_on(int led);
-extern void led_off(int led);
-__END_DECLS
-
-
-/************************************************************************************
- * Name: board_peripheral_reset
- *
- * Description:
- *
- ************************************************************************************/
-__EXPORT void board_peripheral_reset(int ms)
-{
-	/* off */
-	VTX_9V_EN(false);
-	VDD_3V3_SENSORS_EN(false);
-
-	board_control_spi_sensors_power(false, 0xffff);
-
-	usleep(ms * 1000);
-	syslog(LOG_DEBUG, "reset done, %d ms\n", ms);
-
-	/* re-enable power */
-	board_control_spi_sensors_power(true, 0xffff);
-	VDD_3V3_SENSORS_EN(true);
-	VTX_9V_EN(true);
-
-	CAM_SWITCH_CAM1;
-}
-
-/************************************************************************************
- * Name: board_on_reset
- *
- * Description:
- * Optionally provided function called on entry to board_system_reset
- * It should perform any house keeping prior to the rest.
- *
- * status - 1 if resetting to boot loader
- *          0 if just resetting
- *
- ************************************************************************************/
-__EXPORT void board_on_reset(int status)
-{
-	for (int i = 0; i < DIRECT_PWM_OUTPUT_CHANNELS; ++i) {
-		px4_arch_configgpio(io_timer_channel_get_gpio_output(i));
-	}
-
-	/*
-	 * On resets invoked from system (not boot) ensure we establish a low
-	 * output state on PWM pins to disarm the ESC and prevent the reset from potentially
-	 * spinning up the motors.
-	 */
-	if (status >= 0) {
-		up_mdelay(100);
-	}
-}
-
-/************************************************************************************
- * Name: stm32_boardinitialize
- *
- * Description:
- *   All STM32 architectures must provide the following entry point.  This entry point
- *   is called early in the initialization -- after all memory has been configured
- *   and mapped but before any devices have been initialized.
- *
- ************************************************************************************/
-
-__EXPORT void
-stm32_boardinitialize(void)
-{
-	board_on_reset(-1); /* Reset PWM first thing */
-
-	/* configure LEDs */
-
-	board_autoled_initialize();
-
-	/* configure pins */
-
-	const uint32_t gpio[] = PX4_GPIO_INIT_LIST;
-	px4_gpio_init(gpio, arraySize(gpio));
-
-	/* configure USB interfaces */
-
-	stm32_usbinitialize();
-}
-
-/****************************************************************************
- * Name: board_app_initialize
- *
- * Description:
- *   Perform application specific initialization.  This function is never
- *   called directly from application code, but only indirectly via the
- *   (non-standard) boardctl() interface using the command BOARDIOC_INIT.
- *
- * Input Parameters:
- *   arg - The boardctl() argument is passed to the board_app_initialize()
- *         implementation without modification.  The argument has no
- *         meaning to NuttX; the meaning of the argument is a contract
- *         between the board-specific initalization logic and the the
- *         matching application logic.  The value cold be such things as a
- *         mode enumeration value, a set of DIP switch switch settings, a
- *         pointer to configuration data read from a file or serial FLASH,
- *         or whatever you would like to do with it.  Every implementation
- *         should accept zero/NULL as a default configuration.
- *
- * Returned Value:
- *   Zero (OK) is returned on success; a negated errno value is returned on
- *   any failure to indicate the nature of the failure.
- *
- ****************************************************************************/
-
-__EXPORT int board_app_initialize(uintptr_t arg)
-{
-#if !defined(BOOTLOADER)
-
-	/* Need hrt running before using the ADC */
-
-	px4_platform_init();
-
-	stm32_spiinitialize();
-
-	board_spi_reset(10, 0xffff);
-
-	/* configure the DMA allocator */
-
-	if (board_dma_alloc_init() < 0) {
-		syslog(LOG_ERR, "[boot] DMA alloc FAILED\n");
-	}
-
-#  if defined(SERIAL_HAVE_RXDMA)
-	// set up the serial DMA polling at 1ms intervals for received bytes that have not triggered a DMA event.
-	static struct hrt_call serial_dma_call;
-	hrt_call_every(&serial_dma_call, 1000, 1000, (hrt_callout)stm32_serial_dma_poll, NULL);
-#  endif
-
-	/* initial LED state */
-	drv_led_start();
-	led_off(LED_RED);
-	led_off(LED_BLUE);
-
-	if (board_hardfault_init(2, true) != 0) {
-		led_on(LED_RED);
-	}
-
-#  ifdef CONFIG_MMCSD
-	int ret = stm32_sdio_initialize();
-
-	if (ret != OK) {
-		led_on(LED_RED);
-	}
-
-#  endif /* CONFIG_MMCSD */
-
-#if defined(FLASH_BASED_PARAMS)
-	static sector_descriptor_t params_sector_map[] = {
-		{14, 128 * 1024, 0x081C0000},
-		{15, 128 * 1024, 0x081E0000},
-		{0, 0, 0},
-	};
-
-	/* Initialize the flashfs layer to use heap allocated memory */
-	int result = parameter_flashfs_init(params_sector_map, NULL, 0);
-
-	if (result != OK) {
-		syslog(LOG_ERR, "[boot] FAILED to init params in FLASH %d\n", result);
-		led_on(LED_AMBER);
-	}
-
-#endif
-
-	/* Configure the HW based on the manifest */
-
-	px4_platform_configure();
-#endif
-	return OK;
-}

boards/holybro/kakuteh7-wing/src/led.c

@@ -1,235 +0,0 @@
-/****************************************************************************
- *
- *   Copyright (c) 2013 PX4 Development Team. All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- * 3. Neither the name PX4 nor the names of its contributors may be
- *    used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ****************************************************************************/
-
-/**
- * @file led.c
- *
- * PX4FMU LED backend.
- */
-
-#include <px4_platform_common/px4_config.h>
-
-#include <stdbool.h>
-
-#include "chip.h"
-#include "stm32_gpio.h"
-#include "board_config.h"
-
-#include <nuttx/board.h>
-#include <arch/board/board.h>
-
-/*
- * Ideally we'd be able to get these from arm_internal.h,
- * but since we want to be able to disable the NuttX use
- * of leds for system indication at will and there is no
- * separate switch, we need to build independent of the
- * CONFIG_ARCH_LEDS configuration switch.
- */
-__BEGIN_DECLS
-extern void led_init(void);
-extern void led_on(int led);
-extern void led_off(int led);
-extern void led_toggle(int led);
-__END_DECLS
-
-#ifdef CONFIG_ARCH_LEDS
-static bool nuttx_owns_leds = true;
-//                                B  R  S  G
-//                                0  1  2  3
-static const uint8_t xlatpx4[] = {1, 2, 4, 0};
-#  define xlat(p) xlatpx4[(p)]
-static uint32_t g_ledmap[] = {
-	GPIO_nLED_GREEN,   // Indexed by BOARD_LED_GREEN
-	GPIO_nLED_BLUE,    // Indexed by BOARD_LED_BLUE
-	GPIO_nLED_RED,     // Indexed by BOARD_LED_RED
-	GPIO_nSAFETY_SWITCH_LED_OUT,  // Indexed by LED_SAFETY by xlatpx4
-};
-
-#else
-
-#  define xlat(p) (p)
-static uint32_t g_ledmap[] = {
-	GPIO_nLED_BLUE,                     // Indexed by LED_BLUE
-	GPIO_nLED_RED,                      // Indexed by LED_RED, LED_AMBER
-	0,                                  // Indexed by LED_SAFETY (defaulted to an input)
-	0,                                  // Indexed by LED_GREEN
-};
-
-#endif
-
-__EXPORT void led_init(void)
-{
-	for (size_t l = 0; l < (sizeof(g_ledmap) / sizeof(g_ledmap[0])); l++) {
-		if (g_ledmap[l] != 0) {
-			stm32_configgpio(g_ledmap[l]);
-		}
-	}
-}
-
-static void phy_set_led(int led, bool state)
-{
-	/* Drive Low to switch on */
-
-	if (g_ledmap[led] != 0) {
-		stm32_gpiowrite(g_ledmap[led], !state);
-	}
-}
-
-static bool phy_get_led(int led)
-{
-	/* If Low it is on */
-	if (g_ledmap[led] != 0) {
-		return !stm32_gpioread(g_ledmap[led]);
-	}
-
-	return false;
-}
-
-__EXPORT void led_on(int led)
-{
-	phy_set_led(xlat(led), true);
-}
-
-__EXPORT void led_off(int led)
-{
-	phy_set_led(xlat(led), false);
-}
-
-__EXPORT void led_toggle(int led)
-{
-	phy_set_led(xlat(led), !phy_get_led(xlat(led)));
-}
-
-#ifdef CONFIG_ARCH_LEDS
-/****************************************************************************
- * Public Functions
- ****************************************************************************/
-
-/****************************************************************************
- * Name: board_autoled_initialize
- ****************************************************************************/
-
-void board_autoled_initialize(void)
-{
-	led_init();
-}
-
-/****************************************************************************
- * Name: board_autoled_on
- ****************************************************************************/
-
-void board_autoled_on(int led)
-{
-	if (!nuttx_owns_leds) {
-		return;
-	}
-
-	switch (led) {
-	default:
-		break;
-
-	case LED_HEAPALLOCATE:
-		phy_set_led(BOARD_LED_BLUE, true);
-		break;
-
-	case LED_IRQSENABLED:
-		phy_set_led(BOARD_LED_BLUE, false);
-		phy_set_led(BOARD_LED_GREEN, true);
-		break;
-
-	case LED_STACKCREATED:
-		phy_set_led(BOARD_LED_GREEN, true);
-		phy_set_led(BOARD_LED_BLUE, true);
-		break;
-
-	case LED_INIRQ:
-		phy_set_led(BOARD_LED_BLUE, true);
-		break;
-
-	case LED_SIGNAL:
-		phy_set_led(BOARD_LED_GREEN, true);
-		break;
-
-	case LED_ASSERTION:
-		phy_set_led(BOARD_LED_RED, true);
-		phy_set_led(BOARD_LED_BLUE, true);
-		break;
-
-	case LED_PANIC:
-		phy_set_led(BOARD_LED_RED, true);
-		break;
-
-	case LED_IDLE : /* IDLE */
-		phy_set_led(BOARD_LED_RED, true);
-		break;
-	}
-}
-
-/****************************************************************************
- * Name: board_autoled_off
- ****************************************************************************/
-
-void board_autoled_off(int led)
-{
-	if (!nuttx_owns_leds) {
-		return;
-	}
-
-	switch (led) {
-	default:
-		break;
-
-	case LED_SIGNAL:
-		phy_set_led(BOARD_LED_GREEN, false);
-		break;
-
-	case LED_INIRQ:
-		phy_set_led(BOARD_LED_BLUE, false);
-		break;
-
-	case LED_ASSERTION:
-		phy_set_led(BOARD_LED_RED, false);
-		phy_set_led(BOARD_LED_BLUE, false);
-		break;
-
-	case LED_PANIC:
-		phy_set_led(BOARD_LED_RED, false);
-		break;
-
-	case LED_IDLE : /* IDLE */
-		phy_set_led(BOARD_LED_RED, false);
-		break;
-	}
-}
-
-#endif /* CONFIG_ARCH_LEDS */

boards/holybro/kakuteh7-wing/src/sdio.c

@@ -1,177 +0,0 @@
-/****************************************************************************
- *
- *   Copyright (C) 2014, 2016 Gregory Nutt. All rights reserved.
- *   Author: Gregory Nutt <gnutt@nuttx.org>
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- * 3. Neither the name NuttX nor the names of its contributors may be
- *    used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ****************************************************************************/
-
-/****************************************************************************
- * Included Files
- ****************************************************************************/
-
-#include <nuttx/config.h>
-#include <board_config.h>
-
-#include <stdbool.h>
-#include <stdio.h>
-#include <debug.h>
-#include <errno.h>
-
-#include <nuttx/sdio.h>
-#include <nuttx/mmcsd.h>
-
-#include "chip.h"
-#include "board_config.h"
-#include "stm32_gpio.h"
-#include "stm32_sdmmc.h"
-
-#ifdef CONFIG_MMCSD
-
-
-/****************************************************************************
- * Pre-processor Definitions
- ****************************************************************************/
-
-/* Card detections requires card support and a card detection GPIO */
-
-#define HAVE_NCD   1
-#if !defined(GPIO_SDMMC1_NCD)
-#  undef HAVE_NCD
-#endif
-
-/****************************************************************************
- * Private Data
- ****************************************************************************/
-
-static FAR struct sdio_dev_s *sdio_dev;
-#ifdef HAVE_NCD
-static bool g_sd_inserted = 0xff; /* Impossible value */
-#endif
-
-/****************************************************************************
- * Private Functions
- ****************************************************************************/
-
-/****************************************************************************
- * Name: stm32_ncd_interrupt
- *
- * Description:
- *   Card detect interrupt handler.
- *
- ****************************************************************************/
-
-#ifdef HAVE_NCD
-static int stm32_ncd_interrupt(int irq, FAR void *context)
-{
-	bool present;
-
-	present = !stm32_gpioread(GPIO_SDMMC1_NCD);
-
-	if (sdio_dev && present != g_sd_inserted) {
-		sdio_mediachange(sdio_dev, present);
-		g_sd_inserted = present;
-	}
-
-	return OK;
-}
-#endif
-
-/****************************************************************************
- * Public Functions
- ****************************************************************************/
-
-/****************************************************************************
- * Name: stm32_sdio_initialize
- *
- * Description:
- *   Initialize SDIO-based MMC/SD card support
- *
- ****************************************************************************/
-
-int stm32_sdio_initialize(void)
-{
-	int ret;
-
-#ifdef HAVE_NCD
-	/* Card detect */
-
-	bool cd_status;
-
-	/* Configure the card detect GPIO */
-
-	stm32_configgpio(GPIO_SDMMC1_NCD);
-
-	/* Register an interrupt handler for the card detect pin */
-
-	stm32_gpiosetevent(GPIO_SDMMC1_NCD, true, true, true, stm32_ncd_interrupt);
-#endif
-
-	/* Mount the SDIO-based MMC/SD block driver */
-	/* First, get an instance of the SDIO interface */
-
-	finfo("Initializing SDIO slot %d\n", SDIO_SLOTNO);
-
-	sdio_dev = sdio_initialize(SDIO_SLOTNO);
-
-	if (!sdio_dev) {
-		syslog(LOG_ERR, "[boot] Failed to initialize SDIO slot %d\n", SDIO_SLOTNO);
-		return -ENODEV;
-	}
-
-	/* Now bind the SDIO interface to the MMC/SD driver */
-
-	finfo("Bind SDIO to the MMC/SD driver, minor=%d\n", SDIO_MINOR);
-
-	ret = mmcsd_slotinitialize(SDIO_MINOR, sdio_dev);
-
-	if (ret != OK) {
-		syslog(LOG_ERR, "[boot] Failed to bind SDIO to the MMC/SD driver: %d\n", ret);
-		return ret;
-	}
-
-	finfo("Successfully bound SDIO to the MMC/SD driver\n");
-
-#ifdef HAVE_NCD
-	/* Use SD card detect pin to check if a card is g_sd_inserted */
-
-	cd_status = !stm32_gpioread(GPIO_SDMMC1_NCD);
-	finfo("Card detect : %d\n", cd_status);
-
-	sdio_mediachange(sdio_dev, cd_status);
-#else
-	/* Assume that the SD card is inserted.  What choice do we have? */
-
-	sdio_mediachange(sdio_dev, true);
-#endif
-
-	return OK;
-}
-
-#endif /* CONFIG_MMCSD */

boards/holybro/kakuteh7-wing/src/spi.cpp

@@ -1,52 +0,0 @@
-/****************************************************************************
- *
- *   Copyright (C) 2020, 2022 PX4 Development Team. All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- * 3. Neither the name PX4 nor the names of its contributors may be
- *    used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ****************************************************************************/
-
-#include <px4_arch/spi_hw_description.h>
-#include <drivers/drv_sensor.h>
-#include <nuttx/spi/spi.h>
-
-constexpr px4_spi_bus_t px4_spi_buses[SPI_BUS_MAX_BUS_ITEMS] = {
-
-	initSPIBus(SPI::Bus::SPI1, {
-		initSPIDevice(DRV_ACC_DEVTYPE_BMI088, SPI::CS{GPIO::PortC, GPIO::Pin8}),
-		initSPIDevice(DRV_GYR_DEVTYPE_BMI088, SPI::CS{GPIO::PortC, GPIO::Pin9})
-	}),
-	initSPIBus(SPI::Bus::SPI2, {
-		initSPIDevice(DRV_OSD_DEVTYPE_ATXXXX, SPI::CS{GPIO::PortB, GPIO::Pin12}),
-	}),
-	initSPIBus(SPI::Bus::SPI3, {
-		initSPIDevice(DRV_IMU_DEVTYPE_ICM42688P, SPI::CS{GPIO::PortE, GPIO::Pin12}),
-	}),
-};
-
-static constexpr bool unused = validateSPIConfig(px4_spi_buses);

boards/holybro/kakuteh7-wing/src/timer_config.cpp

@@ -1,64 +0,0 @@
-/****************************************************************************
- *
- *   Copyright (C) 2012 PX4 Development Team. All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- * 3. Neither the name PX4 nor the names of its contributors may be
- *    used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ****************************************************************************/
-
-#include <px4_arch/io_timer_hw_description.h>
-
-
-constexpr io_timers_t io_timers[MAX_IO_TIMERS] = {
-	initIOTimer(Timer::Timer1, DMA{DMA::Index1}),
-	initIOTimer(Timer::Timer4, DMA{DMA::Index1}),
-	initIOTimer(Timer::Timer5, DMA{DMA::Index1}),
-	initIOTimer(Timer::Timer15),
-	initIOTimer(Timer::Timer3),
-	initIOTimer(Timer::Timer2),
-};
-
-constexpr timer_io_channels_t timer_io_channels[MAX_TIMER_IO_CHANNELS] = {
-	initIOTimerChannel(io_timers, {Timer::Timer1, Timer::Channel1}, {GPIO::PortA, GPIO::Pin8}),
-	initIOTimerChannel(io_timers, {Timer::Timer1, Timer::Channel2}, {GPIO::PortE, GPIO::Pin11}),
-	initIOTimerChannel(io_timers, {Timer::Timer1, Timer::Channel3}, {GPIO::PortE, GPIO::Pin13}),
-	initIOTimerChannel(io_timers, {Timer::Timer1, Timer::Channel4}, {GPIO::PortE, GPIO::Pin14}),
-	initIOTimerChannel(io_timers, {Timer::Timer4, Timer::Channel3}, {GPIO::PortD, GPIO::Pin14}),
-	initIOTimerChannel(io_timers, {Timer::Timer4, Timer::Channel4}, {GPIO::PortD, GPIO::Pin15}),
-	initIOTimerChannel(io_timers, {Timer::Timer5, Timer::Channel1}, {GPIO::PortA, GPIO::Pin0}),
-	initIOTimerChannel(io_timers, {Timer::Timer5, Timer::Channel2}, {GPIO::PortA, GPIO::Pin1}),
-	initIOTimerChannel(io_timers, {Timer::Timer15, Timer::Channel1}, {GPIO::PortE, GPIO::Pin5}),
-	initIOTimerChannel(io_timers, {Timer::Timer15, Timer::Channel2}, {GPIO::PortE, GPIO::Pin6}),
-	initIOTimerChannel(io_timers, {Timer::Timer3, Timer::Channel2}, {GPIO::PortB, GPIO::Pin5}),
-	initIOTimerChannel(io_timers, {Timer::Timer3, Timer::Channel3}, {GPIO::PortB, GPIO::Pin0}),
-	initIOTimerChannel(io_timers, {Timer::Timer3, Timer::Channel4}, {GPIO::PortB, GPIO::Pin1}),
-	initIOTimerChannel(io_timers, {Timer::Timer2, Timer::Channel1}, {GPIO::PortA, GPIO::Pin15}),
-};
-
-constexpr io_timers_channel_mapping_t io_timers_channel_mapping =
-	initIOTimerChannelMapping(io_timers, timer_io_channels);

boards/holybro/kakuteh7-wing/src/usb.c

@@ -1,105 +0,0 @@
-/****************************************************************************
- *
- *   Copyright (C) 2016 PX4 Development Team. All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- * 3. Neither the name PX4 nor the names of its contributors may be
- *    used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ****************************************************************************/
-
-/**
- * @file usb.c
- *
- * Board-specific USB functions.
- */
-
-/************************************************************************************
- * Included Files
- ************************************************************************************/
-
-#include <px4_platform_common/px4_config.h>
-
-#include <sys/types.h>
-#include <stdint.h>
-#include <stdbool.h>
-#include <debug.h>
-
-#include <nuttx/usb/usbdev.h>
-#include <nuttx/usb/usbdev_trace.h>
-
-#include <arm_internal.h>
-#include <chip.h>
-#include <stm32_gpio.h>
-#include <stm32_otg.h>
-#include "board_config.h"
-
-/************************************************************************************
- * Definitions
- ************************************************************************************/
-
-/************************************************************************************
- * Private Functions
- ************************************************************************************/
-
-/************************************************************************************
- * Public Functions
- ************************************************************************************/
-
-/************************************************************************************
- * Name: stm32_usbinitialize
- *
- * Description:
- *   Called to setup USB-related GPIO pins for the PX4FMU board.
- *
- ************************************************************************************/
-
-__EXPORT void stm32_usbinitialize(void)
-{
-	/* The OTG FS has an internal soft pull-up */
-
-	/* Configure the OTG FS VBUS sensing GPIO, Power On, and Overcurrent GPIOs */
-
-#ifdef CONFIG_STM32H7_OTGFS
-	stm32_configgpio(GPIO_OTGFS_VBUS);
-#endif
-}
-
-/************************************************************************************
- * Name:  stm32_usbsuspend
- *
- * Description:
- *   Board logic must provide the stm32_usbsuspend logic if the USBDEV driver is
- *   used.  This function is called whenever the USB enters or leaves suspend mode.
- *   This is an opportunity for the board logic to shutdown clocks, power, etc.
- *   while the USB is suspended.
- *
- ************************************************************************************/
-
-__EXPORT void stm32_usbsuspend(FAR struct usbdev_s *dev, bool resume)
-{
-	uinfo("resume: %d\n", resume);
-}

boards/modalai/voxl2/target/voxl-px4-start

@@ -59,19 +59,12 @@ fi
 
 param select /data/px4/param/parameters
 
-# Change defaults before loading in updated parameters from the file
+# Load in all of the parameters that have been saved in the file
+param load
 
 # This was the default pre-v1.16.0 and for folks relying on that
 # we set it up here
 param set-default EKF2_EV_CTRL 15
-# Shouldn't need to do it separately with qshell but set-default
-# implementation needs to be updated to set it on DSP as well. Until
-# then need to do it as a separate step.
-qshell param set-default EKF2_EV_CTRL 15
-
-# Load in all of the parameters that have been saved in the file
-# after updating any default values
-param load
 
 # IMU (accelerometer / gyroscope)
 if [ "$PLATFORM" == "M0104" ]; then

boards/px4/fmu-v6xrt/default.px4board

@@ -32,8 +32,6 @@ CONFIG_DRIVERS_IMU_INVENSENSE_IIM42652=y
 CONFIG_COMMON_INS=y
 CONFIG_COMMON_LIGHT=y
 CONFIG_COMMON_MAGNETOMETER=y
-CONFIG_DRIVERS_MAGNETOMETER_BOSCH_BMM350=y
-CONFIG_DRIVERS_MAGNETOMETER_LIS2MDL=y
 CONFIG_DRIVERS_OSD_MSP_OSD=y
 CONFIG_DRIVERS_POWER_MONITOR_INA226=y
 CONFIG_DRIVERS_POWER_MONITOR_INA228=y

boards/px4/fmu-v6xrt/init/rc.board_sensors

@@ -85,43 +85,19 @@ else
 	fi
 fi
 
-if ver hwtypecmp V6XRT000 V6XRT001
-then
-	# Internal SPI bus ICM42686p (hard-mounted)
-	icm42688p -6 -R 12 -b 1 -s start
+# Internal SPI bus ICM42686p (hard-mounted)
+icm42688p -6 -R 12 -b 1 -s start
 
-	# Internal on IMU SPI BMI088
-	bmi088 -A -R 4 -s start
-	bmi088 -G -R 4 -s start
+# Internal on IMU SPI BMI088
+bmi088 -A -R 4 -s start
+bmi088 -G -R 4 -s start
 
-	# Internal on IMU SPI bus ICM42688p
-	icm42688p -R 6 -b 2 -s start
-fi
+# Internal on IMU SPI bus ICM42688p
+icm42688p -R 6 -b 2 -s start
 
-if ver hwtypecmp V6XRT002
-then
-	# Internal SPI bus icm45686 (hard-mounted)
-	icm45686 -R 12 -b 1 -s start
+# Internal magnetometer on I2c
+bmm150 -I start
 
-	# Internal on IMU SPI BMI088
-	bmi088 -A -R 4 -s start
-	bmi088 -G -R 4 -s start
-
-	# Internal on IMU SPI bus icm45686
-	icm45686 -R 6 -b 2 -s start
-fi
-
-if ver hwtypecmp V6XRT000
-then
-	# Internal magnetometer on I2c
-	bmm150 -I start
-fi
-
-if ver hwtypecmp V6XRT001 V6XRT002
-then
-	# Internal magnetometer on I2c
-	bmm350 -I start
-fi
 
 # External compass on GPS1/I2C1 (the 3rd external bus): standard Holybro Pixhawk 4 or CUAV V5 GPS/compass puck (with lights, safety button, and buzzer)
 ist8310 -X -b 1 -R 10 start

boards/px4/fmu-v6xrt/src/board_config.h

@@ -297,10 +297,9 @@
 #define GPIO_HW_VER_SENSE     /* GPIO_AD_23 GPIO9 Pin 22 */  ADC_GPIO(5, 22)
 #define HW_INFO_INIT_PREFIX   "V6XRT"
 
-#define BOARD_NUM_SPI_CFG_HW_VERSIONS 3 // Rev 0, 1 & 2
+#define BOARD_NUM_SPI_CFG_HW_VERSIONS 2 // Rev 0 & 1
 #define V6XRT_0             HW_FMUM_ID(0x0)  // First Release
 #define V6XRT_1             HW_FMUM_ID(0x1)  // Next Release
-#define V6XRT_2             HW_FMUM_ID(0x2)  // Next Release
 
 #define BOARD_I2C_LATEINIT 1 /* See Note about SE550 Eanable */
 

boards/px4/fmu-v6xrt/src/spi.cpp

@@ -81,26 +81,6 @@ constexpr px4_spi_bus_all_hw_t px4_spi_buses_all_hw[BOARD_NUM_SPI_CFG_HW_VERSION
 			initSPIConfigExternal(SPI::CS{GPIO::Port6, GPIO::Pin8}, SPI::DRDY{GPIO::Port1, GPIO::Pin7}), /* GPIO_LPSR_08 GPIO6_IO08  GPIO_EMC_B1_07  GPIO1_IO07*/
 		}),
 	}),
-
-	initSPIFmumID(V6XRT_2, {
-		initSPIBus(SPI::Bus::LPSPI1, {
-			initSPIDevice(DRV_IMU_DEVTYPE_ICM45686, SPI::CS{GPIO::Port2, GPIO::Pin11}, SPI::DRDY{GPIO::Port3, GPIO::Pin19}), /* GPIO_EMC_B2_01 GPIO2_IO11, GPIO_AD_20, GPIO3_IO19 */
-		}, {GPIO::Port2, GPIO::Pin1}), // Power GPIO_EMC_B1_33  GPIO2_IO01
-
-		initSPIBus(SPI::Bus::LPSPI2, {
-			initSPIDevice(DRV_IMU_DEVTYPE_ICM45686, SPI::CS{GPIO::Port3, GPIO::Pin24}, SPI::DRDY{GPIO::Port2, GPIO::Pin7}), /* GPIO_AD_25 GPIO3_IO24, GPIO_EMC_B1_39 GPIO2_IO07 */
-		}, {GPIO::Port1, GPIO::Pin22}), // Power GPIO_EMC_B1_22  GPIO1_IO22
-
-		initSPIBus(SPI::Bus::LPSPI3, {
-			initSPIDevice(DRV_GYR_DEVTYPE_BMI088, SPI::CS{GPIO::Port2, GPIO::Pin18}, SPI::DRDY{GPIO::Port2, GPIO::Pin28}), /* GPIO_EMC_B2_08 GPIO2_IO18, GPIO_EMC_B2_18 GPIO2_IO28 */
-			initSPIDevice(DRV_ACC_DEVTYPE_BMI088, SPI::CS{GPIO::Port2, GPIO::Pin15}),                                      /* GPIO_EMC_B2_05 GPIO2_IO15 */
-		}, {GPIO::Port1, GPIO::Pin14}), // Power GPIO_EMC_B1_14  GPIO1_IO14
-
-		initSPIBusExternal(SPI::Bus::LPSPI6, {
-			initSPIConfigExternal(SPI::CS{GPIO::Port6, GPIO::Pin9}, SPI::DRDY{GPIO::Port1, GPIO::Pin5}), /* GPIO_LPSR_09 GPIO6_IO09 GPIO_EMC_B1_05 GPIO1_IO05*/
-			initSPIConfigExternal(SPI::CS{GPIO::Port6, GPIO::Pin8}, SPI::DRDY{GPIO::Port1, GPIO::Pin7}), /* GPIO_LPSR_08 GPIO6_IO08  GPIO_EMC_B1_07  GPIO1_IO07*/
-		}),
-	}),
 };
 
 static constexpr bool unused = validateSPIConfig(px4_spi_buses_all_hw);

cmake/gtest/CMakeLists.txt.in

@@ -1,4 +1,4 @@
-cmake_minimum_required(VERSION 3.5)
+cmake_minimum_required(VERSION 2.8.4)
 
 project(googletest-download NONE)
 

docs/.vitepress/config.mjs

@@ -8,7 +8,7 @@ import tabsPlugin from "@red-asuka/vitepress-plugin-tabs";
 
 // https://vitepress.dev/reference/site-config
 export default defineConfig({
-  title: "PX4 Guide (v1.16)",
+  title: "PX4 Guide (main)",
   description: "PX4 User and Developer Guide",
   base: process.env.BRANCH_NAME
     ? "/" + process.env.BRANCH_NAME + "/"
@@ -31,7 +31,6 @@ export default defineConfig({
       tabsPlugin(md); //https://github.com/Red-Asuka/vitepress-plugin-tabs
     },
   },
-  cleanUrls: true,
 
   vite: {
     plugins: [
@@ -198,14 +197,11 @@ export default defineConfig({
         text: "Version",
         items: [
           { text: "main", link: "https://docs.px4.io/main/en/" },
-          {
-            text: "v1.16 (stable)",
-            link: "https://docs.px4.io/v1.16/en/",
-          },
-          { text: "v1.15", link: "https://docs.px4.io/v1.15/en/" },
+          { text: "v1.15 (stable)", link: "https://docs.px4.io/v1.15/en/" },
           { text: "v1.14", link: "https://docs.px4.io/v1.14/en/" },
           { text: "v1.13", link: "https://docs.px4.io/v1.13/en/" },
           { text: "v1.12", link: "https://docs.px4.io/v1.12/en/" },
+          { text: "v1.11", link: "https://docs.px4.io/v1.11/en/" },
         ],
       },
     ],

docs/.vitepress/theme/index.js

@@ -37,10 +37,6 @@ export default {
     //Tabs: https://github.com/Red-Asuka/vitepress-plugin-tabs
     app.component("Tab", Tab);
     app.component("Tabs", Tabs);
-    // Global build time variable
-    app.config.globalProperties.$buildTime = JSON.stringify(
-      new Date().toISOString()
-    );
   },
 
   // to support medium zoom: https://github.com/vuejs/vitepress/issues/854

docs/en/SUMMARY.md

@@ -1,7 +1,9 @@
 - [Introduction](index.md)
+
   - [Basic Concepts](getting_started/px4_basic_concepts.md)
 
 - [Multicopters](frames_multicopter/index.md)
+
   - [Features](features_mc/index.md)
     - [Flight Modes](flight_modes_mc/index.md)
       - [Position Mode (MC)](flight_modes_mc/position.md)
@@ -54,6 +56,7 @@
     - [DJI F450 (CUAV v5 nano)](frames_multicopter/dji_f450_cuav_5nano.md)
 
 - [Planes (Fixed-Wing)](frames_plane/index.md)
+
   - [Assembly](assembly/assembly_fw.md)
   - [Config/Tuning](config_fw/index.md)
     - [Auto-tune](config/autotune_fw.md)
@@ -81,6 +84,7 @@
     - [Wing Wing Z84 (Pixracer)](frames_plane/wing_wing_z84.md)
 
 - [VTOL](frames_vtol/index.md)
+
   - [Assembly](assembly/assembly_vtol.md)
   - [VTOL Config/Tuning](config_vtol/index.md)
     - [Auto-tune](config/autotune_vtol.md)
@@ -105,6 +109,7 @@
   - [Complete Vehicles](complete_vehicles_vtol/index.md)
 
 - [Operations](config/operations.md)
+
   - [Safety](config/safety_intro.md)
     - [Safety Configuration (Failsafes)](config/safety.md)
     - [Failsafe Simulation](config/safety_simulation.md)
@@ -125,6 +130,7 @@
     - [QGroundControl Flight-Readiness Status](flying/pre_flight_checks.md)
 
 - [Hardware Selection & Setup](hardware/drone_parts.md)
+
   - [Flight Controllers (Autopilots)](flight_controller/index.md)
     - [Flight Controller Selection](getting_started/flight_controller_selection.md)
     - [Pixhawk Series](flight_controller/pixhawk_series.md)
@@ -175,7 +181,6 @@
       - [Holybro Kakute H7v2](flight_controller/kakuteh7v2.md)
       - [Holybro Kakute H7mini](flight_controller/kakuteh7mini.md)
       - [Holybro Kakute H7](flight_controller/kakuteh7.md)
-      - [Holybro Kakute H7 Wing](flight_controller/kakuteh7-wing.md)
       - [Holybro Durandal](flight_controller/durandal.md)
         - [Wiring Quickstart](assembly/quick_start_durandal.md)
       - [Holybro Pix32 v5](flight_controller/holybro_pix32_v5.md)
@@ -327,7 +332,6 @@
     - [FrSky Telemetry](peripherals/frsky_telemetry.md)
     - [TBS Crossfire (CRSF) Telemetry](telemetry/crsf_telemetry.md)
     - [Satellite Comms (Iridium/RockBlock)](advanced_features/satcom_roadblock.md)
-
   - [Power Systems](power_systems/index.md)
     - [Battery Estimation Tuning](config/battery.md)
     - [Battery Chemistry Overview](power_systems/battery_chemistry.md)
@@ -394,6 +398,7 @@
     - [Full Parameter Reference](advanced_config/parameter_reference.md)
 
 - [Other Vehicles](airframes/index.md)
+
   - [Airships (experimental)](frames_airship/index.md)
   - [Autogyros (experimental)](frames_autogyro/index.md)
     - [ThunderFly Auto-G2 (Holybro pix32)](frames_autogyro/thunderfly_auto_g2.md)
@@ -835,9 +840,8 @@
   - [Terminology/Notation](contribute/notation.md)
   - [Licenses](contribute/licenses.md)
 - [Releases](releases/index.md)
-  - [main (alpha)](https://docs.px4.io/main/en/releases/main.html)
-  - [1.16 (stable)](releases/1.15.md)
-  - [1.15](releases/1.15.md)
+  - [main (alpha)](releases/main.md)
+  - [1.15 (stable)](releases/1.15.md)
   - [1.14](releases/1.14.md)
   - [1.13](releases/1.13.md)
   - [1.12](releases/1.12.md)

docs/en/_sidebar.md

@@ -1,8 +1,10 @@
 <!-- GENERATED CONTENT: DO NOT EDIT -->
 - [Introduction](/index.md)
+
   - [Basic Concepts](/getting_started/px4_basic_concepts.md)
 
 - [Multicopters](/frames_multicopter/index.md)
+
   - [Features](/features_mc/index.md)
     - [Flight Modes](/flight_modes_mc/index.md)
       - [Position Mode (MC)](/flight_modes_mc/position.md)
@@ -55,6 +57,7 @@
     - [DJI F450 (CUAV v5 nano)](/frames_multicopter/dji_f450_cuav_5nano.md)
 
 - [Planes (Fixed-Wing)](/frames_plane/index.md)
+
   - [Assembly](/assembly/assembly_fw.md)
   - [Config/Tuning](/config_fw/index.md)
     - [Auto-tune](/config/autotune_fw.md)
@@ -82,6 +85,7 @@
     - [Wing Wing Z84 (Pixracer)](/frames_plane/wing_wing_z84.md)
 
 - [VTOL](/frames_vtol/index.md)
+
   - [Assembly](/assembly/assembly_vtol.md)
   - [VTOL Config/Tuning](/config_vtol/index.md)
     - [Auto-tune](/config/autotune_vtol.md)
@@ -106,6 +110,7 @@
   - [Complete Vehicles](/complete_vehicles_vtol/index.md)
 
 - [Operations](/config/operations.md)
+
   - [Safety](/config/safety_intro.md)
     - [Safety Configuration (Failsafes)](/config/safety.md)
     - [Failsafe Simulation](/config/safety_simulation.md)
@@ -126,6 +131,7 @@
     - [QGroundControl Flight-Readiness Status](/flying/pre_flight_checks.md)
 
 - [Hardware Selection & Setup](/hardware/drone_parts.md)
+
   - [Flight Controllers (Autopilots)](/flight_controller/index.md)
     - [Flight Controller Selection](/getting_started/flight_controller_selection.md)
     - [Pixhawk Series](/flight_controller/pixhawk_series.md)
@@ -160,7 +166,7 @@
       - [AirMind MindPX](/flight_controller/mindpx.md)
       - [AirMind MindRacer](/flight_controller/mindracer.md)
       - [ARK Electronics ARKV6X](/flight_controller/ark_v6x.md)
-      - [ARK FPV Flight Controller](/flight_controller/ark_fpv.md)
+      - [ARK FPV Flight Controller](/flight_controller/ark_fpv.md) 
       - [ARK Pi6X Flow Flight Controller](/flight_controller/ark_pi6x.md)
       - [CUAV X7](/flight_controller/cuav_x7.md)
       - [CUAV Nora](/flight_controller/cuav_nora.md)
@@ -176,7 +182,6 @@
       - [Holybro Kakute H7v2](/flight_controller/kakuteh7v2.md)
       - [Holybro Kakute H7mini](/flight_controller/kakuteh7mini.md)
       - [Holybro Kakute H7](/flight_controller/kakuteh7.md)
-      - [Holybro Kakute H7 Wing](/flight_controller/kakuteh7-wing.md)
       - [Holybro Durandal](/flight_controller/durandal.md)
         - [Wiring Quickstart](/assembly/quick_start_durandal.md)
       - [Holybro Pix32 v5](/flight_controller/holybro_pix32_v5.md)
@@ -249,7 +254,7 @@
     - [GNSS (GPS)](/gps_compass/index.md)
       - [ARK GPS (CAN)](/dronecan/ark_gps.md)
       - [ARK SAM GPS](/gps_compass/ark_sam_gps.md)
-      - [ARK TESEO GPS](/dronecan/ark_teseo_gps.md)
+      - [ARK TESEO GPS](/dronecan/ark_teseo_gps.md) 
       - [CUAV NEO 3 GPS](/gps_compass/gps_cuav_neo_3.md)
       - [CUAV NEO 3 Pro GPS (CAN)](/gps_compass/gps_cuav_neo_3pro.md)
       - [CUAV NEO 3X GPS (CAN)](/gps_compass/gps_cuav_neo_3x.md)
@@ -322,13 +327,10 @@
         - [ARK Electron Microhard Serial Telemetry Radio](/telemetry/ark_microhard_serial.md)
         - [Holybro Microhard P900 Telemetry Radio](/telemetry/holybro_microhard_p900_radio.md)
       - [CUAV P8 Telemetry Radio](/telemetry/cuav_p8_radio.md)
-      - [J.Fi Wireless Telemetry Module](/telemetry/jfi_telemetry.md)
       - [HolyBro XBP9X - Discontinued](/telemetry/holybro_xbp9x_radio.md)
-
     - [FrSky Telemetry](/peripherals/frsky_telemetry.md)
     - [TBS Crossfire (CRSF) Telemetry](/telemetry/crsf_telemetry.md)
     - [Satellite Comms (Iridium/RockBlock)](/advanced_features/satcom_roadblock.md)
-
   - [Power Systems](/power_systems/index.md)
     - [Battery Estimation Tuning](/config/battery.md)
     - [Battery Chemistry Overview](/power_systems/battery_chemistry.md)
@@ -395,6 +397,7 @@
     - [Full Parameter Reference](/advanced_config/parameter_reference.md)
 
 - [Other Vehicles](/airframes/index.md)
+
   - [Airships (experimental)](/frames_airship/index.md)
   - [Autogyros (experimental)](/frames_autogyro/index.md)
     - [ThunderFly Auto-G2 (Holybro pix32)](/frames_autogyro/thunderfly_auto_g2.md)
@@ -709,10 +712,6 @@
         - [YawEstimatorStatus](/msg_docs/YawEstimatorStatus.md)
         - [VehicleStatusV0](/msg_docs/VehicleStatusV0.md)
     - [MAVLink Messaging](/middleware/mavlink.md)
-      - [Adding Messages](/mavlink/adding_messages.md)
-      - [Streaming Messages](/mavlink/streaming_messages.md)
-      - [Receiving Messages](/mavlink/receiving_messages.md)
-      - [Custom MAVLink Messages](/mavlink/custom_messages.md)
       - [Standard Modes Protocol](/mavlink/standard_modes.md)
     - [uXRCE-DDS (PX4-ROS 2/DDS Bridge)](/middleware/uxrce_dds.md)
   - [Modules & Commands](/modules/modules_main.md)
@@ -836,9 +835,8 @@
   - [Terminology/Notation](/contribute/notation.md)
   - [Licenses](/contribute/licenses.md)
 - [Releases](/releases/index.md)
-  - [main (alpha)](/https://docs.px4.io/main/en/releases/main.html)
-  - [1.16 (stable)](/releases/1.15.md)
-  - [1.15](/releases/1.15.md)
+  - [main (alpha)](/releases/main.md)
+  - [1.15 (stable)](/releases/1.15.md)
   - [1.14](/releases/1.14.md)
   - [1.13](/releases/1.13.md)
-  - [1.12](/releases/1.12.md)
+  - [1.12](/releases/1.12.md)

docs/en/actuators/index.md

@@ -3,9 +3,10 @@
 This section contains topics about the core actuators used for flight control (ESC/motors, and servos), and how they are assigned to the flight controller outputs, configured, and calibrated.
 
 - [Actuator Allocation](../config/actuators.md) — Configure flight controller outputs for specific functions and ESC/servo types.
+
 - [ESCs & Motors](../peripherals/esc_motors.md) — ESCs such as [DShot](../peripherals/dshot.md) (recommended) and DroneCAN.
 - [ESC Calibration](../advanced_config/esc_calibration.md) — Calibration for PWM ESC (not required for DShot/CAN ESC/servos).
 
 ## See Also
 
-- [Peripherals](../peripherals/index.md) - includes non-core actuators such as grippers, parachutes, etc.
+- [Peripherals](../peripherals/index.md) - includes non-core actuators such as grippers, parachutes, etc. 

docs/en/flight_controller/kakuteh7-wing.md

@@ -1,86 +0,0 @@
-# Holybro Kakute H7 V2
-
-:::warning
-PX4 does not manufacture this (or any) autopilot.
-Contact the [manufacturer](https://holybro.com/) for hardware support or compliance issues.
-:::
-
-The [Holybro Kakute H743 Wing](https://holybro.com/products/kakute-h743-wing) is a fully featured flight controller specifically aimed at fixed-wing and VTOL applications. It has the STM32 H743 Processor running at 480 MHz and CAN Bus support, along with dual camera support & switch, ON/OFF Pit Switch, 5V, 6V/8V, 9V/12 BEC, and plug-and-play GPS, CAN, I2C ports.
-
-
-::: info
-This flight controller is [manufacturer supported](../flight_controller/autopilot_manufacturer_supported.md).
-:::
-
-## Where to Buy
-
-The board can be bought from one of the following shops (for example):
-
-- [Holybro](https://holybro.com/products/kakute-h743-wing)
-
-
-## Connectors and Pins
-
-| Pin              | Function                          | PX4 default                |
-| ---------------- | --------------------------------- | -------------------------- |
-| GPS 1            | USART1 and I2C1                   | GPS1                       |
-| R2, T2           | USART2 RX and TX                  | GPS2                       |
-| R3, T3           | USART3 RX and TX                  | TELEM1                     |
-| R5, T5           | USART5 RX and TX                  | TELEM2                     |
-| R6, T6           | USART6 RX and TX                  | RC (PPM, SBUS, etc.) input |
-| R7, T7, RTS, CTS | UART7 RX and TX with flow control | TELEM3                     |
-| R8, T8           | UART8 RX and TX                   | Console                    |
-| Buz-, Buz+       | Piezo buzzer                      |                            |
-| M1 to M14        | Motor signal outputs              |                            |
-
-<a id="bootloader"></a>
-
-## PX4 Bootloader Update
-
-The board comes pre-installed with [Betaflight](https://github.com/betaflight/betaflight/wiki).
-Before the PX4 firmware can be installed, the _PX4 bootloader_ must be flashed.
-Download the [holybro_kakuteh7-wing.hex](https://github.com/PX4/PX4-Autopilot/raw/main/docs/assets/flight_controller/kakuteh7-wing/holybro_kakuteh7-wing_bootloader.hex) bootloader binary and read [this page](../advanced_config/bootloader_update_from_betaflight.md) for flashing instructions.
-
-## Building Firmware
-
-To [build PX4](../dev_setup/building_px4.md) for this target:
-
-```
-make holybro_kakuteh7-wing_default
-```
-
-## Installing PX4 Firmware
-
-::: info
-KakuteH7-wing is supported with PX4 master & PX4 v1.16 or newer..
-Prior to that release you will need to manually build and install the firmware.
-:::
-
-Firmware can be manually installed in any of the normal ways:
-
-- Build and upload the source:
-
-  ```
-  make holybro_kakuteh7-wing_default upload
-  ```
-
-- [Load the firmware](../config/firmware.md) using _QGroundControl_.
-  You can use either pre-built firmware or your own custom firmware.
-
-## Serial Port Mapping
-
-| UART   | Device     | Port                  | Default function |
-| ------ | ---------- | --------------------- | ---------------- |
-| USART1 | /dev/ttyS0 | GPS 1                 | GPS1             |
-| USART2 | /dev/ttyS1 | R2, T2                | GPS2             |
-| USART3 | /dev/ttyS2 | R3, T3                | TELEM1           |
-| UART5  | /dev/ttyS3 | R5, T5                | TELEM2           |
-| USART6 | /dev/ttyS4 | R6, (T6)              | RC input         |
-| UART7  | /dev/ttyS5 | R7, T7, RTS, CTS      | TELEM3           |
-| UART8  | /dev/ttyS6 | R8, T8                | Console          |
-
-## Debug Port
-
-### System Console
-
-UART8 RX and TX are configured for use as the [System Console](../debug/system_console.md).

docs/en/index.md

@@ -9,6 +9,14 @@ Developed by world-class developers from industry and academia, and supported by
 
 :::tip
 This guide contains everything you need to assemble, configure, and safely fly a PX4-based vehicle. Interested in contributing? Check out the [Development](development/development.md) section.
+
+:::
+
+:::warning
+This guide is for the _development_ version of PX4 (`main` branch).
+Use the **Version** selector to find the current _stable_ version.
+
+Documented changes since the stable release are captured in the evolving [release note](releases/main.md).
 :::
 
 ## How Do I Get Started?
@@ -89,7 +97,7 @@ You can access these from the Languages menu (top right):
 
 ![Language Selector](../assets/vuepress/language_selector.png)
 
-<!--@include: _contributors.md -->
+<!--@include: _contributors.md-->
 
 ## License
 
@@ -108,6 +116,7 @@ Select the links below to display the calendar in your timezone (and to add it t
 
 :::tip
 The calendar default timezone is Central European Time (CET).
+
 :::
 
 <iframe src="https://calendar.google.com/calendar/embed?title=Dronecode%20Calendar&amp;mode=WEEK&amp;height=600&amp;wkst=1&amp;bgcolor=%23FFFFFF&amp;src=linuxfoundation.org_g21tvam24m7pm7jhev01bvlqh8%40group.calendar.google.com&amp;color=%23691426&amp;ctz=Europe%2FZurich" style="border-width:0" width="800" height="600" frameborder="0" scrolling="no"></iframe>
@@ -128,5 +137,3 @@ The PX4 flight stack is hosted under the governance of the [Dronecode Project](h
 <a href="https://www.linuxfoundation.org/projects" style="padding:20px;"><img src="https://mavlink.io/assets/site/logo_linux_foundation.png" alt="Linux Foundation Logo" width="80px" /></a>
 
 <div style="padding:10px">&nbsp;</div>
-
-Doc build time: {{ $buildTime }}

docs/en/peripherals/gripper.md

@@ -38,7 +38,7 @@ MAVLink applications, such as ground stations, can also control the gripper usin
 
 PX4 gripper support is tied to the package delivery feature, which must be enabled and configured in order to be able to use a gripper.
 
-1. Ensure your board has the Payload Deliverer module enabled: CONFIG_MODULES_PAYLOAD_DELIVERER.
+1. Set [PD_GRIPPER_EN](../advanced_config/parameter_reference.md#PD_GRIPPER_EN) parameter to 1 (reboot required after change).
 1. Set [PD_GRIPPER_TYPE](../advanced_config/parameter_reference.md#PD_GRIPPER_TYPE) to match your gripper.
    For example, set to `Servo` for a [Servo Gripper](gripper_servo.md).