split drivers/rc_input per protocol

.ci/Jenkinsfile-hardware

@@ -755,11 +755,9 @@ void runTests() {
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "top once"'
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "work_queue status"'
 
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "sensors stop"' // ignore irrelevant sensor timeouts during test
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "ostest"'
   sh './Tools/HIL/reboot.py --device `find /dev/serial -name *usb-*`' // reboot after ostest
 
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "sensors stop"' // ignore irrelevant sensor timeouts during test
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "commander_tests" || true'
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "controllib_test"'
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "lightware_laser_test"'

.github/workflows/compile_nuttx.yml

@@ -54,7 +54,6 @@ jobs:
           nxp_fmuk66-e,
           nxp_fmuk66-v3,
           nxp_fmurt1062-v1,
-          nxp_mr-canhubk3,
           nxp_ucans32k146,
           omnibus_f4sd,
           px4_fmu-v2,

.github/workflows/mavros_mission_tests.yml

@@ -59,13 +59,13 @@ jobs:
       run: |
           export
           ulimit -a
-    - name: Build PX4 and sitl_gazebo-classic
+    - name: Build PX4 and sitl_gazebo
       env:
         PX4_CMAKE_BUILD_TYPE: ${{matrix.config.build_type}}
       run: |
         ccache -z
         make px4_sitl_default
-        make px4_sitl_default sitl_gazebo-classic
+        make px4_sitl_default sitl_gazebo
         ccache -s
 
     - name: Core dump settings

.github/workflows/mavros_offboard_tests.yml

@@ -54,13 +54,13 @@ jobs:
       run: |
           export
           ulimit -a
-    - name: Build PX4 and sitl_gazebo-classic
+    - name: Build PX4 and sitl_gazebo
       env:
         PX4_CMAKE_BUILD_TYPE: ${{matrix.config.build_type}}
       run: |
         ccache -z
         make px4_sitl_default
-        make px4_sitl_default sitl_gazebo-classic
+        make px4_sitl_default sitl_gazebo
         ccache -s
 
     - name: Core dump settings

.github/workflows/sitl_tests.yml

@@ -74,14 +74,14 @@ jobs:
     - name: Build SITL Gazebo
       env:
         PX4_CMAKE_BUILD_TYPE: ${{matrix.config.build_type}}
-      run: make px4_sitl_default sitl_gazebo-classic
-    - name: ccache post-run sitl_gazebo-classic
+      run: make px4_sitl_default sitl_gazebo
+    - name: ccache post-run sitl_gazebo
       run: ccache -s
     - name: Build MAVSDK tests
       env:
         PX4_CMAKE_BUILD_TYPE: ${{matrix.config.build_type}}
         DONT_RUN: 1
-      run: make px4_sitl_default sitl_gazebo-classic mavsdk_tests
+      run: make px4_sitl_default gazebo mavsdk_tests
     - name: ccache post-run mavsdk_tests
       run: ccache -s
 

.gitignore

@@ -47,6 +47,8 @@ GTAGS
 *.files
 *.includes
 
+Tools/jlink-nuttx.so
+
 # CLion ignores
 .idea
 cmake-build-*/

.gitmodules

@@ -10,9 +10,9 @@
 	path = Tools/simulation/jmavsim/jMAVSim
 	url = https://github.com/PX4/jMAVSim.git
 	branch = main
-[submodule "Tools/simulation/gazebo-classic/sitl_gazebo-classic"]
-	path = Tools/simulation/gazebo-classic/sitl_gazebo-classic
-	url = https://github.com/PX4/PX4-SITL_gazebo-classic.git
+[submodule "Tools/simulation/gazebo/sitl_gazebo"]
+	path = Tools/simulation/gazebo/sitl_gazebo
+	url = https://github.com/PX4/PX4-SITL_gazebo.git
 	branch = main
 [submodule "src/drivers/gps/devices"]
 	path = src/drivers/gps/devices

.vscode/.gitignore

@@ -4,7 +4,6 @@ compile_commands.json
 
 # generated by cmake
 launch.json
-c_cpp_properties.json
 
 # C/C++ extension does some local caching in this folder
 ipch/

.vscode/c_cpp_properties.json

@@ -3,18 +3,14 @@
         {
             "name": "PX4",
             "includePath": [
-                "${workspaceFolder}/**",
+                "${workspaceFolder}/**"
             ],
             "defines": [],
             "macFrameworkPath": [],
             "configurationProvider": "ms-vscode.cmake-tools",
             "cppStandard": "c++14",
-            "cStandard": "c11",
-            "forcedInclude": [
-                 "@PX4_BINARY_DIR@/px4_boardconfig.h",
-                 "@PX4_SOURCE_DIR@/platforms/common/include/px4_platform_common/defines.h"
-                 ]
+            "cStandard": "c11"
         }
     ],
     "version": 4
-}
+}

.vscode/cmake-variants.yaml

@@ -266,16 +266,6 @@ CONFIG:
       buildType: MinSizeRel
       settings:
         CONFIG: nxp_fmuk66-v3_default
-    nxp_mr-canhubk3_default:
-      short: nxp_mr-canhubk3_default
-      buildType: MinSizeRel
-      settings:
-        CONFIG: nxp_mr-canhubk3_default
-    nxp_mr-canhubk3_fmu:
-      short: nxp_mr-canhubk3_fmu
-      buildType: MinSizeRel
-      settings:
-        CONFIG: nxp_mr-canhubk3_fmu
     raspberrypi_pico_default:
       short: raspberrypi_pico
       buildType: MinSizeRel

.vscode/tasks.json

@@ -49,6 +49,49 @@
                 "group": "test"
             }
         },
+        {
+            "label": "jmavsim build",
+            "type": "shell",
+            "command": "ant create_run_jar copy_res",
+            "options": {
+                "cwd": "${workspaceFolder}/Tools/simulation/jmavsim/jMAVSim"
+            },
+            "presentation": {
+                "echo": true,
+                "reveal": "never",
+                "revealProblems": "onProblem",
+                "focus": false,
+                "panel": "dedicated",
+                "showReuseMessage": false,
+                "clear": false,
+                "close": true
+            },
+            "problemMatcher": []
+        },
+        {
+            "label": "jmavsim",
+            "type": "shell",
+            "dependsOn": "jmavsim build",
+            "command": "java -Djava.ext.dirs= -jar jmavsim_run.jar -r 250 -lockstep -tcp localhost:4560 -qgc",
+            "options": {
+                "cwd": "${workspaceFolder}/Tools/simulation/jmavsim/jMAVSim/out/production",
+                "env": {
+                    "PX4_SIM_SPEED_FACTOR": "1"
+                }
+            },
+            "isBackground": true,
+            "presentation": {
+                "echo": true,
+                "reveal": "never",
+                "revealProblems": "onProblem",
+                "focus": false,
+                "panel": "dedicated",
+                "showReuseMessage": false,
+                "clear": false,
+                "close": true
+            },
+            "problemMatcher": []
+        },
         {
             "label": "jmavsim kill",
             "type": "shell",
@@ -67,9 +110,9 @@
             "dependsOn":["px4_sitl_cleanup"]
         },
         {
-            "label": "gazebo-classic build",
+            "label": "gazebo build",
             "type": "shell",
-            "command": "make px4_sitl_default sitl_gazebo-classic",
+            "command": "make px4_sitl_default sitl_gazebo",
             "options": {
                 "cwd": "${workspaceFolder}"
             },
@@ -86,18 +129,18 @@
             "problemMatcher": [],
         },
         {
-            "label": "gazebo-classic start",
+            "label": "gazebo start",
             "type": "shell",
-            "dependsOn": "gazebo-classic build",
+            "dependsOn": "gazebo build",
             "options": {
                 "cwd": "${workspaceFolder}",
                 "env": {
-                    "GAZEBO_PLUGIN_PATH": "${workspaceFolder}/build/px4_sitl_default/build_gazebo-classic",
-                    "GAZEBO_MODEL_PATH": "${workspaceFolder}/Tools/simulation/gazebo-classic/sitl_gazebo-classic/models",
+                    "GAZEBO_PLUGIN_PATH": "${workspaceFolder}/build/px4_sitl_default/build_gazebo",
+                    "GAZEBO_MODEL_PATH": "${workspaceFolder}/Tools/simulation/gazebo/sitl_gazebo/models",
                     "PX4_SIM_SPEED_FACTOR": "1"
                 }
             },
-            "command": "gzserver --verbose ${workspaceFolder}/Tools/simulation/gazebo-classic/sitl_gazebo-classic/worlds/empty.world",
+            "command": "gzserver --verbose ${workspaceFolder}/Tools/simulation/gazebo/sitl_gazebo/worlds/empty.world",
             "isBackground": true,
             "presentation": {
                 "echo": true,
@@ -128,18 +171,18 @@
             ]
         },
         {
-            "label": "gazebo-classic",
+            "label": "gazebo",
             "type": "shell",
-            "dependsOn": "gazebo-classic start",
+            "dependsOn": "gazebo start",
             "options": {
                 "cwd": "${workspaceFolder}",
                 "env": {
-                    "GAZEBO_PLUGIN_PATH": "${workspaceFolder}/build/px4_sitl_default/build_gazebo-classic",
-                    "GAZEBO_MODEL_PATH": "${workspaceFolder}/Tools/simulation/gazebo-classic/sitl_gazebo-classic/models",
+                    "GAZEBO_PLUGIN_PATH": "${workspaceFolder}/build/px4_sitl_default/build_gazebo",
+                    "GAZEBO_MODEL_PATH": "${workspaceFolder}/Tools/simulation/gazebo/sitl_gazebo/models",
                     "PX4_SIM_SPEED_FACTOR": "1"
                 }
             },
-            "command": "gz model --verbose --spawn-file=${workspaceFolder}/Tools/simulation/gazebo-classic/sitl_gazebo-classic/models/iris/iris.sdf --model-name=iris -x 1.01 -y 0.98 -z 0.83",
+            "command": "gz model --verbose --spawn-file=${workspaceFolder}/Tools/simulation/gazebo/sitl_gazebo/models/iris/iris.sdf --model-name=iris -x 1.01 -y 0.98 -z 0.83",
             "isBackground": false,
             "presentation": {
                 "echo": true,
@@ -194,7 +237,7 @@
             "dependsOn":["ign gazebo kill"]
         },
         {
-            "label": "gazebo-classic kill",
+            "label": "gazebo kill",
             "type": "shell",
             "command": "pkill -9 -f gzserver || true",
             "presentation": {

CMakeLists.txt

@@ -282,10 +282,7 @@ if(${PX4_PLATFORM} STREQUAL "posix")
 	set(CMAKE_POSITION_INDEPENDENT_CODE ON)
 	set(CMAKE_ENABLE_EXPORTS ON)
 
-	if(CMAKE_BUILD_TYPE MATCHES "Coverage")
-		include(coverage)
-	endif()
-
+	include(coverage)
 	include(sanitizers)
 
 	# Define GNU standard installation directories

Kconfig

@@ -174,8 +174,8 @@ menu "Serial ports"
     config BOARD_SERIAL_WIFI
         string "WIFI tty port"
 
-    config BOARD_SERIAL_EXT2
-        string "EXT2 tty port"
+    config BOARD_SERIAL_PPB
+        string "PPB (Pixhawk Payload Bus) tty port"
 endmenu
 
 menu "drivers"
@@ -195,6 +195,5 @@ source "src/examples/Kconfig"
 endmenu
 
 menu "platforms"
-depends on PLATFORM_QURT || PLATFORM_POSIX
 source "platforms/common/Kconfig"
 endmenu

Makefile

@@ -324,6 +324,10 @@ px4io_update:
 	cp build/cubepilot_io-v2_default/cubepilot_io-v2_default.bin boards/cubepilot/cubeyellow/extras/cubepilot_io-v2_default.bin
 	git status
 
+jlink-nuttx:
+	$(CC) -shared -fPIC platforms/nuttx/NuttX/nuttx/tools/jlink-nuttx.c -o Tools/jlink-nuttx.so
+
+
 bootloaders_update: ark_fmu-v6x_bootloader cuav_nora_bootloader cuav_x7pro_bootloader cubepilot_cubeorange_bootloader holybro_durandal-v1_bootloader holybro_kakuteh7_bootloader matek_h743_bootloader matek_h743-mini_bootloader matek_h743-slim_bootloader modalai_fc-v2_bootloader mro_ctrl-zero-classic_bootloader mro_ctrl-zero-h7_bootloader mro_ctrl-zero-h7-oem_bootloader mro_pixracerpro_bootloader px4_fmu-v6c_bootloader px4_fmu-v6u_bootloader px4_fmu-v6x_bootloader
 	git status
 
@@ -388,17 +392,17 @@ tests_coverage:
 
 
 rostest: px4_sitl_default
-	@$(MAKE) --no-print-directory px4_sitl_default sitl_gazebo-classic
+	@$(MAKE) --no-print-directory px4_sitl_default sitl_gazebo
 
 tests_integration: px4_sitl_default
-	@$(MAKE) --no-print-directory px4_sitl_default sitl_gazebo-classic
+	@$(MAKE) --no-print-directory px4_sitl_default sitl_gazebo
 	@$(MAKE) --no-print-directory px4_sitl_default mavsdk_tests
 	@"$(SRC_DIR)"/test/mavsdk_tests/mavsdk_test_runner.py --speed-factor 20 test/mavsdk_tests/configs/sitl.json
 
 tests_integration_coverage:
 	@$(MAKE) clean
 	@$(MAKE) --no-print-directory px4_sitl_default PX4_CMAKE_BUILD_TYPE=Coverage
-	@$(MAKE) --no-print-directory px4_sitl_default sitl_gazebo-classic
+	@$(MAKE) --no-print-directory px4_sitl_default sitl_gazebo
 	@$(MAKE) --no-print-directory px4_sitl_default mavsdk_tests
 	@"$(SRC_DIR)"/test/mavsdk_tests/mavsdk_test_runner.py --speed-factor 20 test/mavsdk_tests/configs/sitl.json
 	@mkdir -p coverage
@@ -408,13 +412,13 @@ tests_mission: rostest
 	@"$(SRC_DIR)"/test/rostest_px4_run.sh mavros_posix_tests_missions.test
 
 rostest_run: px4_sitl_default
-	@$(MAKE) --no-print-directory px4_sitl_default sitl_gazebo-classic
+	@$(MAKE) --no-print-directory px4_sitl_default sitl_gazebo
 	@"$(SRC_DIR)"/test/rostest_px4_run.sh $(TEST_FILE) mission:=$(TEST_MISSION) vehicle:=$(TEST_VEHICLE)
 
 tests_mission_coverage:
 	@$(MAKE) clean
 	@$(MAKE) --no-print-directory px4_sitl_default PX4_CMAKE_BUILD_TYPE=Coverage
-	@$(MAKE) --no-print-directory px4_sitl_default sitl_gazebo-classic PX4_CMAKE_BUILD_TYPE=Coverage
+	@$(MAKE) --no-print-directory px4_sitl_default sitl_gazebo PX4_CMAKE_BUILD_TYPE=Coverage
 	@"$(SRC_DIR)"/test/rostest_px4_run.sh mavros_posix_test_mission.test mission:=VTOL_mission_1 vehicle:=standard_vtol
 	@$(MAKE) --no-print-directory px4_sitl_default generate_coverage
 
@@ -489,7 +493,7 @@ validate_module_configs:
 
 # Cleanup
 # --------------------------------------------------------------------
-.PHONY: clean submodulesclean submodulesupdate distclean
+.PHONY: clean submodulesclean submodulesupdate gazeboclean distclean
 
 clean:
 	@[ ! -d "$(SRC_DIR)/build" ] || find "$(SRC_DIR)/build" -mindepth 1 -maxdepth 1 -type d -exec sh -c "echo {}; cmake --build {} -- clean || rm -rf {}" \; # use generated build system to clean, wipe build directory if it fails
@@ -507,7 +511,10 @@ submodulesupdate:
 	@git submodule update --init --recursive --jobs 4
 	@git fetch --all --tags --recurse-submodules=yes --jobs=4
 
-distclean:
+gazeboclean:
+	@rm -rf ~/.gazebo/*
+
+distclean: gazeboclean
 	@git submodule deinit --force $(SRC_DIR)
 	@rm -rf "$(SRC_DIR)/build"
 	@git clean --force -X "$(SRC_DIR)/msg/" "$(SRC_DIR)/platforms/" "$(SRC_DIR)/posix-configs/" "$(SRC_DIR)/ROMFS/" "$(SRC_DIR)/src/" "$(SRC_DIR)/test/" "$(SRC_DIR)/Tools/"
@@ -547,14 +554,6 @@ check_px4: $(call make_list,nuttx,"px4") \
 check_nxp: $(call make_list,nuttx,"nxp") \
 	sizes
 
-# helpers for running olddefconfig (nuttx) and px4_savedefconfig on all boards
-.PHONY: all_oldconfig all_px4_savedefconfig
-all_oldconfig:
-	@for targ in $(ALL_CONFIG_TARGETS); do $(MAKE) $$targ oldconfig; done
-
-all_px4_savedefconfig:
-	@for targ in $(ALL_CONFIG_TARGETS); do $(MAKE) $$targ px4_savedefconfig; done
-
 .PHONY: failsafe_web run_failsafe_web_server
 failsafe_web:
 	@if ! command -v emcc; then echo -e "Install emscripten first: https://emscripten.org/docs/getting_started/downloads.html\nAnd source the env: source <path>/emsdk_env.sh"; exit 1; fi

ROMFS/px4fmu_common/init.d-posix/airframes/10017_jmavsim_iris

@@ -1,32 +0,0 @@
-#!/bin/sh
-#
-# @name 3DR Iris Quadrotor SITL jMAVSim
-#
-# @type Quadrotor Wide
-#
-# @maintainer Julian Oes <julian@oes.ch>
-#
-
-. ${R}etc/init.d/rc.mc_defaults
-
-param set-default CA_AIRFRAME 0
-
-param set-default CA_ROTOR_COUNT 4
-param set-default CA_ROTOR0_PX 0.1515
-param set-default CA_ROTOR0_PY 0.245
-param set-default CA_ROTOR0_KM 0.05
-param set-default CA_ROTOR1_PX -0.1515
-param set-default CA_ROTOR1_PY -0.1875
-param set-default CA_ROTOR1_KM 0.05
-param set-default CA_ROTOR2_PX 0.1515
-param set-default CA_ROTOR2_PY -0.245
-param set-default CA_ROTOR2_KM -0.05
-param set-default CA_ROTOR3_PX -0.1515
-param set-default CA_ROTOR3_PY 0.1875
-param set-default CA_ROTOR3_KM -0.05
-
-param set-default PWM_MAIN_FUNC1 101
-param set-default PWM_MAIN_FUNC2 102
-param set-default PWM_MAIN_FUNC3 103
-param set-default PWM_MAIN_FUNC4 104
-

ROMFS/px4fmu_common/init.d-posix/airframes/10018_gazebo-classic_iris_foggy_lidar

@@ -1,33 +0,0 @@
-#!/bin/sh
-#
-# @name 3DR Iris Quadrotor SITL (foggy_lidar)
-#
-# @type Quadrotor Wide
-#
-
-. ${R}etc/init.d/rc.mc_defaults
-
-
-param set-default CA_AIRFRAME 0
-
-param set-default CA_ROTOR_COUNT 4
-param set-default CA_ROTOR0_PX 0.1515
-param set-default CA_ROTOR0_PY 0.245
-param set-default CA_ROTOR0_KM 0.05
-param set-default CA_ROTOR1_PX -0.1515
-param set-default CA_ROTOR1_PY -0.1875
-param set-default CA_ROTOR1_KM 0.05
-param set-default CA_ROTOR2_PX 0.1515
-param set-default CA_ROTOR2_PY -0.245
-param set-default CA_ROTOR2_KM -0.05
-param set-default CA_ROTOR3_PX -0.1515
-param set-default CA_ROTOR3_PY 0.1875
-param set-default CA_ROTOR3_KM -0.05
-
-param set-default PWM_MAIN_FUNC1 101
-param set-default PWM_MAIN_FUNC2 102
-param set-default PWM_MAIN_FUNC3 103
-param set-default PWM_MAIN_FUNC4 104
-
-param set-default EKF2_RNG_A_HMAX 10
-

ROMFS/px4fmu_common/init.d-posix/airframes/10018_iris_foggy_lidar

@@ -0,0 +1,11 @@
+#!/bin/sh
+#
+# @name 3DR Iris Quadrotor SITL (foggy_lidar)
+#
+# @type Quadrotor Wide
+#
+
+. ${R}etc/init.d-posix/airframes/10016_iris
+
+param set-default EKF2_RNG_A_HMAX 10
+

ROMFS/px4fmu_common/init.d-posix/airframes/10040_quadx

@@ -41,3 +41,4 @@ param set-default PWM_MAIN_FUNC3 103
 param set-default PWM_MAIN_FUNC4 104
 
 param set SIH_VEHICLE_TYPE 0
+

ROMFS/px4fmu_common/init.d-posix/airframes/1010_gazebo-classic_iris_opt_flow

@@ -1,47 +0,0 @@
-#!/bin/sh
-#
-# @name 3DR Iris Quadrotor SITL (Optical Flow)
-#
-# @type Quadrotor Wide
-#
-
-. ${R}etc/init.d/rc.mc_defaults
-
-
-param set-default CA_AIRFRAME 0
-
-param set-default CA_ROTOR_COUNT 4
-param set-default CA_ROTOR0_PX 0.1515
-param set-default CA_ROTOR0_PY 0.245
-param set-default CA_ROTOR0_KM 0.05
-param set-default CA_ROTOR1_PX -0.1515
-param set-default CA_ROTOR1_PY -0.1875
-param set-default CA_ROTOR1_KM 0.05
-param set-default CA_ROTOR2_PX 0.1515
-param set-default CA_ROTOR2_PY -0.245
-param set-default CA_ROTOR2_KM -0.05
-param set-default CA_ROTOR3_PX -0.1515
-param set-default CA_ROTOR3_PY 0.1875
-param set-default CA_ROTOR3_KM -0.05
-
-param set-default PWM_MAIN_FUNC1 101
-param set-default PWM_MAIN_FUNC2 102
-param set-default PWM_MAIN_FUNC3 103
-param set-default PWM_MAIN_FUNC4 104
-
-# EKF2
-param set-default EKF2_AID_MASK 2
-param set-default EKF2_GPS_CTRL 0
-param set-default EKF2_EVP_NOISE 0.05
-param set-default EKF2_EVA_NOISE 0.05
-
-# LPE: Flow-only mode
-param set-default LPE_FUSION 242
-param set-default LPE_FAKE_ORIGIN 1
-
-param set-default MPC_ALT_MODE 2
-
-param set-default SENS_FLOW_ROT 6
-param set-default SENS_FLOW_MINHGT 0.7
-param set-default SENS_FLOW_MAXHGT 3.0
-param set-default SENS_FLOW_MAXR 2.5

ROMFS/px4fmu_common/init.d-posix/airframes/1010_iris_opt_flow

@@ -0,0 +1,25 @@
+#!/bin/sh
+#
+# @name 3DR Iris Quadrotor SITL (Optical Flow)
+#
+# @type Quadrotor Wide
+#
+
+. ${R}etc/init.d-posix/airframes/10016_iris
+
+# EKF2
+param set-default EKF2_AID_MASK 2
+param set-default EKF2_GPS_CTRL 0
+param set-default EKF2_EVP_NOISE 0.05
+param set-default EKF2_EVA_NOISE 0.05
+
+# LPE: Flow-only mode
+param set-default LPE_FUSION 242
+param set-default LPE_FAKE_ORIGIN 1
+
+param set-default MPC_ALT_MODE 2
+
+param set-default SENS_FLOW_ROT 6
+param set-default SENS_FLOW_MINHGT 0.7
+param set-default SENS_FLOW_MAXHGT 3.0
+param set-default SENS_FLOW_MAXR 2.5

ROMFS/px4fmu_common/init.d-posix/airframes/1011_gazebo-classic_iris_irlock

@@ -1,38 +0,0 @@
-#!/bin/sh
-#
-# @name 3DR Iris Quadrotor SITL (irlock)
-#
-# @type Quadrotor Wide
-#
-
-. ${R}etc/init.d/rc.mc_defaults
-
-
-param set-default CA_AIRFRAME 0
-
-param set-default CA_ROTOR_COUNT 4
-param set-default CA_ROTOR0_PX 0.1515
-param set-default CA_ROTOR0_PY 0.245
-param set-default CA_ROTOR0_KM 0.05
-param set-default CA_ROTOR1_PX -0.1515
-param set-default CA_ROTOR1_PY -0.1875
-param set-default CA_ROTOR1_KM 0.05
-param set-default CA_ROTOR2_PX 0.1515
-param set-default CA_ROTOR2_PY -0.245
-param set-default CA_ROTOR2_KM -0.05
-param set-default CA_ROTOR3_PX -0.1515
-param set-default CA_ROTOR3_PY 0.1875
-param set-default CA_ROTOR3_KM -0.05
-
-param set-default PWM_MAIN_FUNC1 101
-param set-default PWM_MAIN_FUNC2 102
-param set-default PWM_MAIN_FUNC3 103
-param set-default PWM_MAIN_FUNC4 104
-
-# enable fusion of landing target velocity
-param set-default LTEST_MODE 1
-param set-default PLD_HACC_RAD 0.1
-param set-default RTL_PLD_MD 2
-
-# Start up Landing Target Estimator module
-landing_target_estimator start

ROMFS/px4fmu_common/init.d-posix/airframes/1011_iris_irlock

@@ -0,0 +1,16 @@
+#!/bin/sh
+#
+# @name 3DR Iris Quadrotor SITL (irlock)
+#
+# @type Quadrotor Wide
+#
+
+. ${R}etc/init.d-posix/airframes/10016_iris
+
+# enable fusion of landing target velocity
+param set-default LTEST_MODE 1
+param set-default PLD_HACC_RAD 0.1
+param set-default RTL_PLD_MD 2
+
+# Start up Landing Target Estimator module
+landing_target_estimator start

ROMFS/px4fmu_common/init.d-posix/airframes/1012_gazebo-classic_iris_rplidar

@@ -1,33 +0,0 @@
-#!/bin/sh
-#
-# @name 3DR Iris Quadrotor SITL (rplidar)
-#
-# @type Quadrotor Wide
-#
-
-. ${R}etc/init.d/rc.mc_defaults
-
-
-param set-default CA_AIRFRAME 0
-
-param set-default CA_ROTOR_COUNT 4
-param set-default CA_ROTOR0_PX 0.1515
-param set-default CA_ROTOR0_PY 0.245
-param set-default CA_ROTOR0_KM 0.05
-param set-default CA_ROTOR1_PX -0.1515
-param set-default CA_ROTOR1_PY -0.1875
-param set-default CA_ROTOR1_KM 0.05
-param set-default CA_ROTOR2_PX 0.1515
-param set-default CA_ROTOR2_PY -0.245
-param set-default CA_ROTOR2_KM -0.05
-param set-default CA_ROTOR3_PX -0.1515
-param set-default CA_ROTOR3_PY 0.1875
-param set-default CA_ROTOR3_KM -0.05
-
-param set-default PWM_MAIN_FUNC1 101
-param set-default PWM_MAIN_FUNC2 102
-param set-default PWM_MAIN_FUNC3 103
-param set-default PWM_MAIN_FUNC4 104
-
-param set-default LPE_FUSION 242
-

ROMFS/px4fmu_common/init.d-posix/airframes/1012_iris_rplidar

@@ -0,0 +1,11 @@
+#!/bin/sh
+#
+# @name 3DR Iris Quadrotor SITL (rplidar)
+#
+# @type Quadrotor Wide
+#
+
+. ${R}etc/init.d-posix/airframes/10016_iris
+
+param set-default LPE_FUSION 242
+

ROMFS/px4fmu_common/init.d-posix/airframes/1015_gazebo-classic_iris_obs_avoid

@@ -1,34 +0,0 @@
-#!/bin/sh
-#
-# @name 3DR Iris Quadrotor SITL (Obstacle Avoidance)
-#
-# @type Quadrotor Wide
-#
-
-. ${R}etc/init.d/rc.mc_defaults
-
-
-param set-default CA_AIRFRAME 0
-
-param set-default CA_ROTOR_COUNT 4
-param set-default CA_ROTOR0_PX 0.1515
-param set-default CA_ROTOR0_PY 0.245
-param set-default CA_ROTOR0_KM 0.05
-param set-default CA_ROTOR1_PX -0.1515
-param set-default CA_ROTOR1_PY -0.1875
-param set-default CA_ROTOR1_KM 0.05
-param set-default CA_ROTOR2_PX 0.1515
-param set-default CA_ROTOR2_PY -0.245
-param set-default CA_ROTOR2_KM -0.05
-param set-default CA_ROTOR3_PX -0.1515
-param set-default CA_ROTOR3_PY 0.1875
-param set-default CA_ROTOR3_KM -0.05
-
-param set-default PWM_MAIN_FUNC1 101
-param set-default PWM_MAIN_FUNC2 102
-param set-default PWM_MAIN_FUNC3 103
-param set-default PWM_MAIN_FUNC4 104
-
-param set-default COM_OBS_AVOID 1
-param set-default MPC_XY_CRUISE 5.0
-

ROMFS/px4fmu_common/init.d-posix/airframes/1015_iris_obs_avoid

@@ -0,0 +1,12 @@
+#!/bin/sh
+#
+# @name 3DR Iris Quadrotor SITL (Obstacle Avoidance)
+#
+# @type Quadrotor Wide
+#
+
+. ${R}etc/init.d-posix/airframes/10016_iris
+
+param set-default COM_OBS_AVOID 1
+param set-default MPC_XY_CRUISE 5.0
+

ROMFS/px4fmu_common/init.d-posix/airframes/1017_gazebo-classic_iris_opt_flow_mockup

@@ -1,40 +0,0 @@
-#!/bin/sh
-#
-# @name 3DR Iris Quadrotor SITL (Optical Flow)
-#
-# @type Quadrotor Wide
-#
-
-. ${R}etc/init.d/rc.mc_defaults
-
-
-param set-default CA_AIRFRAME 0
-
-param set-default CA_ROTOR_COUNT 4
-param set-default CA_ROTOR0_PX 0.1515
-param set-default CA_ROTOR0_PY 0.245
-param set-default CA_ROTOR0_KM 0.05
-param set-default CA_ROTOR1_PX -0.1515
-param set-default CA_ROTOR1_PY -0.1875
-param set-default CA_ROTOR1_KM 0.05
-param set-default CA_ROTOR2_PX 0.1515
-param set-default CA_ROTOR2_PY -0.245
-param set-default CA_ROTOR2_KM -0.05
-param set-default CA_ROTOR3_PX -0.1515
-param set-default CA_ROTOR3_PY 0.1875
-param set-default CA_ROTOR3_KM -0.05
-
-param set-default PWM_MAIN_FUNC1 101
-param set-default PWM_MAIN_FUNC2 102
-param set-default PWM_MAIN_FUNC3 103
-param set-default PWM_MAIN_FUNC4 104
-
-# EKF2
-param set-default EKF2_AID_MASK 2
-param set-default EKF2_GPS_CTRL 0
-
-# LPE: Flow-only mode
-param set-default LPE_FUSION 242
-param set-default LPE_FAKE_ORIGIN 1
-
-param set-default MPC_ALT_MODE 2

ROMFS/px4fmu_common/init.d-posix/airframes/1017_iris_opt_flow_mockup

@@ -0,0 +1,18 @@
+#!/bin/sh
+#
+# @name 3DR Iris Quadrotor SITL (Optical Flow)
+#
+# @type Quadrotor Wide
+#
+
+. ${R}etc/init.d-posix/airframes/10016_iris
+
+# EKF2
+param set-default EKF2_AID_MASK 2
+param set-default EKF2_GPS_CTRL 0
+
+# LPE: Flow-only mode
+param set-default LPE_FUSION 242
+param set-default LPE_FAKE_ORIGIN 1
+
+param set-default MPC_ALT_MODE 2

ROMFS/px4fmu_common/init.d-posix/airframes/1018_iris_vision_velocity

@@ -0,0 +1,13 @@
+#!/bin/sh
+#
+# @name 3DR Iris Quadrotor SITL (Vision Velocity)
+#
+# @type Quadrotor Wide
+#
+
+. ${R}etc/init.d-posix/airframes/10016_iris
+
+# EKF2: Vision velocity and heading
+param set-default EKF2_AID_MASK 272
+param set-default EKF2_EV_DELAY 5
+param set-default EKF2_GPS_CTRL 0

ROMFS/px4fmu_common/init.d-posix/airframes/1019_gazebo-classic_iris_dual_gps

@@ -1,33 +0,0 @@
-#!/bin/sh
-#
-# @name 3DR Iris Quadrotor SITL (Dual GPS)
-#
-# @type Quadrotor Wide
-#
-
-. ${R}etc/init.d/rc.mc_defaults
-
-
-param set-default CA_AIRFRAME 0
-
-param set-default CA_ROTOR_COUNT 4
-param set-default CA_ROTOR0_PX 0.1515
-param set-default CA_ROTOR0_PY 0.245
-param set-default CA_ROTOR0_KM 0.05
-param set-default CA_ROTOR1_PX -0.1515
-param set-default CA_ROTOR1_PY -0.1875
-param set-default CA_ROTOR1_KM 0.05
-param set-default CA_ROTOR2_PX 0.1515
-param set-default CA_ROTOR2_PY -0.245
-param set-default CA_ROTOR2_KM -0.05
-param set-default CA_ROTOR3_PX -0.1515
-param set-default CA_ROTOR3_PY 0.1875
-param set-default CA_ROTOR3_KM -0.05
-
-param set-default PWM_MAIN_FUNC1 101
-param set-default PWM_MAIN_FUNC2 102
-param set-default PWM_MAIN_FUNC3 103
-param set-default PWM_MAIN_FUNC4 104
-
-# EKF2: Multi GPS blending
-param set-default SENS_GPS_MASK 7

ROMFS/px4fmu_common/init.d-posix/airframes/1019_iris_dual_gps

@@ -0,0 +1,11 @@
+#!/bin/sh
+#
+# @name 3DR Iris Quadrotor SITL (Dual GPS)
+#
+# @type Quadrotor Wide
+#
+
+. ${R}etc/init.d-posix/airframes/10016_iris
+
+# EKF2: Multi GPS blending
+param set-default SENS_GPS_MASK 7

ROMFS/px4fmu_common/init.d-posix/airframes/1031_gazebo-classic_plane_cam

@@ -1,81 +0,0 @@
-#!/bin/sh
-#
-# @name Plane SITL with camera
-#
-
-. ${R}etc/init.d/rc.fw_defaults
-
-param set-default EKF2_MAG_ACCLIM 0
-param set-default EKF2_MAG_YAWLIM 0
-
-param set-default FW_LND_AIRSPD_SC 1
-param set-default FW_LND_ANG 8
-
-param set-default FW_L1_PERIOD 12
-
-param set-default FW_PR_P 0.9
-param set-default FW_PR_FF 0.5
-param set-default FW_PR_I 0.5
-param set-default TRIM_PITCH -0.15
-
-param set-default FW_PSP_OFF 2
-param set-default FW_P_LIM_MIN -15
-
-param set-default FW_RR_FF 0.5
-param set-default FW_RR_P 0.3
-param set-default FW_RR_I 0.5
-
-param set-default FW_YR_FF 0.5
-param set-default FW_YR_P 0.6
-param set-default FW_YR_I 0.5
-
-param set-default FW_SPOILERS_LND 0.4
-
-param set-default FW_THR_MAX 0.6
-param set-default FW_THR_MIN 0.05
-param set-default FW_THR_TRIM 0.25
-
-param set-default FW_T_CLMB_MAX 8
-param set-default FW_T_SINK_MAX 2.7
-param set-default FW_T_SINK_MIN 2.2
-
-param set-default FW_W_EN 1
-
-param set-default MIS_LTRMIN_ALT 30
-param set-default MIS_TAKEOFF_ALT 30
-
-param set-default NAV_ACC_RAD 15
-param set-default NAV_DLL_ACT 2
-
-param set-default RWTO_TKOFF 1
-
-param set-default CA_AIRFRAME 1
-
-param set-default CA_ROTOR_COUNT 1
-param set-default CA_ROTOR0_PX 0.3
-
-param set-default CA_SV_CS_COUNT 6
-param set-default CA_SV_CS0_TRQ_R -0.5
-param set-default CA_SV_CS0_TYPE 1
-param set-default CA_SV_CS1_TRQ_R 0.5
-param set-default CA_SV_CS1_TYPE 2
-param set-default CA_SV_CS2_TRQ_P 1.0
-param set-default CA_SV_CS2_TYPE 3
-param set-default CA_SV_CS3_TRQ_Y 1.0
-param set-default CA_SV_CS3_TYPE 4
-param set-default CA_SV_CS4_TYPE 9
-param set-default CA_SV_CS5_TYPE 10
-param set-default PWM_MAIN_FUNC3 204
-param set-default PWM_MAIN_FUNC4 205
-param set-default PWM_MAIN_FUNC5 101
-param set-default PWM_MAIN_FUNC6 201
-param set-default PWM_MAIN_FUNC7 202
-param set-default PWM_MAIN_FUNC8 203
-param set-default PWM_MAIN_FUNC9 206
-param set-default PWM_MAIN_REV 256
-
-# Camera trigger interface is MAVLink
-param set-default TRIG_INTERFACE 3
-
-# Distance trigger mode enabled
-param set-default TRIG_MODE 4

ROMFS/px4fmu_common/init.d-posix/airframes/1031_plane_cam

@@ -0,0 +1,12 @@
+#!/bin/sh
+#
+# @name Plane SITL with camera
+#
+
+. ${R}etc/init.d-posix/airframes/1030_plane
+
+# Camera trigger interface is MAVLink
+param set-default TRIG_INTERFACE 3
+
+# Distance trigger mode enabled
+param set-default TRIG_MODE 4

ROMFS/px4fmu_common/init.d-posix/airframes/1032_gazebo-classic_plane_catapult

@@ -1,78 +0,0 @@
-#!/bin/sh
-#
-# @name Plane SITL with catapult
-#
-
-. ${R}etc/init.d/rc.fw_defaults
-
-param set-default EKF2_MAG_ACCLIM 0
-param set-default EKF2_MAG_YAWLIM 0
-
-param set-default FW_LND_AIRSPD_SC 1
-param set-default FW_LND_ANG 8
-
-param set-default FW_L1_PERIOD 12
-
-param set-default FW_PR_P 0.9
-param set-default FW_PR_FF 0.5
-param set-default FW_PR_I 0.5
-param set-default TRIM_PITCH -0.15
-
-param set-default FW_PSP_OFF 2
-param set-default FW_P_LIM_MIN -15
-
-param set-default FW_RR_FF 0.5
-param set-default FW_RR_P 0.3
-param set-default FW_RR_I 0.5
-
-param set-default FW_YR_FF 0.5
-param set-default FW_YR_P 0.6
-param set-default FW_YR_I 0.5
-
-param set-default FW_SPOILERS_LND 0.4
-
-param set-default FW_THR_MAX 0.6
-param set-default FW_THR_MIN 0.05
-param set-default FW_THR_TRIM 0.25
-
-param set-default FW_T_CLMB_MAX 8
-param set-default FW_T_SINK_MAX 2.7
-param set-default FW_T_SINK_MIN 2.2
-
-param set-default FW_W_EN 1
-
-param set-default MIS_LTRMIN_ALT 30
-param set-default MIS_TAKEOFF_ALT 30
-
-param set-default NAV_ACC_RAD 15
-param set-default NAV_DLL_ACT 2
-
-param set-default RWTO_TKOFF 1
-
-param set-default CA_AIRFRAME 1
-
-param set-default CA_ROTOR_COUNT 1
-param set-default CA_ROTOR0_PX 0.3
-
-param set-default CA_SV_CS_COUNT 6
-param set-default CA_SV_CS0_TRQ_R -0.5
-param set-default CA_SV_CS0_TYPE 1
-param set-default CA_SV_CS1_TRQ_R 0.5
-param set-default CA_SV_CS1_TYPE 2
-param set-default CA_SV_CS2_TRQ_P 1.0
-param set-default CA_SV_CS2_TYPE 3
-param set-default CA_SV_CS3_TRQ_Y 1.0
-param set-default CA_SV_CS3_TYPE 4
-param set-default CA_SV_CS4_TYPE 9
-param set-default CA_SV_CS5_TYPE 10
-param set-default PWM_MAIN_FUNC3 204
-param set-default PWM_MAIN_FUNC4 205
-param set-default PWM_MAIN_FUNC5 101
-param set-default PWM_MAIN_FUNC6 201
-param set-default PWM_MAIN_FUNC7 202
-param set-default PWM_MAIN_FUNC8 203
-param set-default PWM_MAIN_FUNC9 206
-param set-default PWM_MAIN_REV 256
-
-param set-default RWTO_TKOFF 0
-

ROMFS/px4fmu_common/init.d-posix/airframes/1032_plane_catapult

@@ -0,0 +1,9 @@
+#!/bin/sh
+#
+# @name Plane SITL with catapult
+#
+
+. ${R}etc/init.d-posix/airframes/1030_plane
+
+param set-default RWTO_TKOFF 0
+

ROMFS/px4fmu_common/init.d-posix/airframes/1036_malolo

@@ -57,3 +57,4 @@ param set-default PWM_MAIN_FUNC7 202
 param set-default PWM_MAIN_FUNC8 203
 param set-default PWM_MAIN_FUNC9 206
 param set-default PWM_MAIN_REV 256
+

ROMFS/px4fmu_common/init.d-posix/airframes/1038_gazebo-classic_glider

@@ -1,78 +0,0 @@
-#!/bin/sh
-#
-# @name Plane SITL with catapult
-#
-
-. ${R}etc/init.d/rc.fw_defaults
-
-param set-default EKF2_MAG_ACCLIM 0
-param set-default EKF2_MAG_YAWLIM 0
-
-param set-default FW_LND_AIRSPD_SC 1
-param set-default FW_LND_ANG 8
-
-param set-default FW_L1_PERIOD 12
-
-param set-default FW_PR_P 0.9
-param set-default FW_PR_FF 0.5
-param set-default FW_PR_I 0.5
-param set-default TRIM_PITCH -0.15
-
-param set-default FW_PSP_OFF 2
-param set-default FW_P_LIM_MIN -15
-
-param set-default FW_RR_FF 0.5
-param set-default FW_RR_P 0.3
-param set-default FW_RR_I 0.5
-
-param set-default FW_YR_FF 0.5
-param set-default FW_YR_P 0.6
-param set-default FW_YR_I 0.5
-
-param set-default FW_SPOILERS_LND 0.4
-
-param set-default FW_THR_MAX 0.6
-param set-default FW_THR_MIN 0.05
-param set-default FW_THR_TRIM 0.25
-
-param set-default FW_T_CLMB_MAX 8
-param set-default FW_T_SINK_MAX 2.7
-param set-default FW_T_SINK_MIN 2.2
-
-param set-default FW_W_EN 1
-
-param set-default MIS_LTRMIN_ALT 30
-param set-default MIS_TAKEOFF_ALT 30
-
-param set-default NAV_ACC_RAD 15
-param set-default NAV_DLL_ACT 2
-
-param set-default RWTO_TKOFF 1
-
-param set-default CA_AIRFRAME 1
-
-param set-default CA_ROTOR_COUNT 1
-param set-default CA_ROTOR0_PX 0.3
-
-param set-default CA_SV_CS_COUNT 6
-param set-default CA_SV_CS0_TRQ_R -0.5
-param set-default CA_SV_CS0_TYPE 1
-param set-default CA_SV_CS1_TRQ_R 0.5
-param set-default CA_SV_CS1_TYPE 2
-param set-default CA_SV_CS2_TRQ_P 1.0
-param set-default CA_SV_CS2_TYPE 3
-param set-default CA_SV_CS3_TRQ_Y 1.0
-param set-default CA_SV_CS3_TYPE 4
-param set-default CA_SV_CS4_TYPE 9
-param set-default CA_SV_CS5_TYPE 10
-param set-default PWM_MAIN_FUNC3 204
-param set-default PWM_MAIN_FUNC4 205
-param set-default PWM_MAIN_FUNC5 101
-param set-default PWM_MAIN_FUNC6 201
-param set-default PWM_MAIN_FUNC7 202
-param set-default PWM_MAIN_FUNC8 203
-param set-default PWM_MAIN_FUNC9 206
-param set-default PWM_MAIN_REV 256
-
-param set-default FW_THR_TRIM 0.0
-param set-default RWTO_TKOFF 0

ROMFS/px4fmu_common/init.d-posix/airframes/1038_glider

@@ -0,0 +1,9 @@
+#!/bin/sh
+#
+# @name Plane SITL with catapult
+#
+
+. ${R}etc/init.d-posix/airframes/1030_plane
+
+param set-default FW_THR_TRIM 0.0
+param set-default RWTO_TKOFF 0

ROMFS/px4fmu_common/init.d-posix/airframes/1039_flightgear_rascal

@@ -1,65 +0,0 @@
-#!/bin/sh
-#
-# @name Plane SITL
-#
-
-. ${R}etc/init.d/rc.fw_defaults
-
-param set-default FW_LND_AIRSPD_SC 1.1
-param set-default FW_LND_ANG 5
-param set-default FW_LND_FL_PMIN 9.5
-param set-default FW_LND_FL_PMAX 20
-param set-default FW_LND_FLALT 5
-
-param set-default FW_L1_PERIOD 25
-
-param set-default FW_PR_FF 0.40
-param set-default FW_PR_I 0.05
-param set-default FW_PR_P 0.05
-
-param set-default FW_R_TC 0.45
-param set-default FW_RR_FF 0.40
-param set-default FW_RR_I 0.132
-param set-default FW_RR_P 0.085
-
-param set-default FW_W_EN 1
-
-param set-default MIS_LTRMIN_ALT 30
-param set-default MIS_TAKEOFF_ALT 20
-param set-default MIS_DIST_1WP 2500
-param set-default MIS_DIST_WPS 10000
-
-param set-default NAV_ACC_RAD 15
-param set-default NAV_DLL_ACT 2
-
-param set-default RWTO_TKOFF 1
-
-param set-default RWTO_MAX_PITCH 20
-
-param set-default RWTO_PSP 8
-param set-default RWTO_AIRSPD_SCL 1.8
-
-param set-default CA_AIRFRAME 1
-
-param set-default CA_ROTOR_COUNT 1
-param set-default CA_ROTOR0_PX 0.3
-
-param set-default CA_SV_CS_COUNT 6
-param set-default CA_SV_CS0_TRQ_R -0.5
-param set-default CA_SV_CS0_TYPE 1
-param set-default CA_SV_CS1_TRQ_R 0.5
-param set-default CA_SV_CS1_TYPE 2
-param set-default CA_SV_CS2_TRQ_P 1.0
-param set-default CA_SV_CS2_TYPE 3
-param set-default CA_SV_CS3_TRQ_Y 1.0
-param set-default CA_SV_CS3_TYPE 4
-param set-default CA_SV_CS4_TYPE 9
-param set-default CA_SV_CS5_TYPE 10
-param set-default PWM_MAIN_FUNC3 204
-param set-default PWM_MAIN_FUNC4 205
-param set-default PWM_MAIN_FUNC5 101
-param set-default PWM_MAIN_FUNC6 201
-param set-default PWM_MAIN_FUNC7 202
-param set-default PWM_MAIN_FUNC8 203
-param set-default PWM_MAIN_FUNC9 206
-param set-default PWM_MAIN_REV 256

ROMFS/px4fmu_common/init.d-posix/airframes/1043_gazebo-classic_standard_vtol_drop

@@ -1,93 +0,0 @@
-#!/bin/sh
-#
-# @name Standard VTOL
-#
-# @type Standard VTOL
-#
-
-. ${R}etc/init.d/rc.vtol_defaults
-
-# TODO: Enable motor failure detection when the
-# VTOL no longer reports 0A for all ESCs in SITL
-param set-default FD_ACT_EN 0
-param set-default FD_ACT_MOT_TOUT 500
-
-param set-default CA_AIRFRAME 2
-
-param set-default CA_ROTOR_COUNT 5
-param set-default CA_ROTOR0_PX 0.1515
-param set-default CA_ROTOR0_PY 0.245
-param set-default CA_ROTOR0_KM 0.05
-param set-default CA_ROTOR1_PX -0.1515
-param set-default CA_ROTOR1_PY -0.1875
-param set-default CA_ROTOR1_KM 0.05
-param set-default CA_ROTOR2_PX 0.1515
-param set-default CA_ROTOR2_PY -0.245
-param set-default CA_ROTOR2_KM -0.05
-param set-default CA_ROTOR3_PX -0.1515
-param set-default CA_ROTOR3_PY 0.1875
-param set-default CA_ROTOR3_KM -0.05
-param set-default CA_ROTOR4_AX 1.0
-param set-default CA_ROTOR4_AZ 0.0
-param set-default CA_ROTOR4_PX 0.2
-
-param set-default CA_SV_CS_COUNT 3
-param set-default CA_SV_CS0_TYPE 1
-param set-default CA_SV_CS0_TRQ_R -0.5
-param set-default CA_SV_CS1_TYPE 2
-param set-default CA_SV_CS1_TRQ_R 0.5
-param set-default CA_SV_CS2_TYPE 3
-param set-default CA_SV_CS2_TRQ_P 1.0
-param set-default PWM_MAIN_FUNC1 101
-param set-default PWM_MAIN_FUNC2 102
-param set-default PWM_MAIN_FUNC3 103
-param set-default PWM_MAIN_FUNC4 104
-param set-default PWM_MAIN_FUNC5 105
-param set-default PWM_MAIN_FUNC6 201
-param set-default PWM_MAIN_FUNC7 202
-param set-default PWM_MAIN_FUNC8 203
-
-param set-default FW_L1_PERIOD 12
-param set-default FW_PR_FF 0.2
-param set-default FW_PR_P 0.9
-param set-default FW_PSP_OFF 2
-param set-default FW_P_LIM_MIN -15
-param set-default FW_RR_FF 0.1
-param set-default FW_RR_P 0.3
-param set-default FW_THR_TRIM 0.25
-param set-default FW_THR_MAX 0.6
-param set-default FW_THR_MIN 0.05
-param set-default FW_T_CLMB_MAX 8
-param set-default FW_T_SINK_MAX 2.7
-param set-default FW_T_SINK_MIN 2.2
-
-param set-default MC_ROLLRATE_P 0.3
-param set-default MC_YAW_P 1.6
-
-param set-default MIS_TAKEOFF_ALT 10
-
-param set-default MPC_ACC_HOR_MAX 2
-param set-default MPC_XY_P 0.8
-param set-default MPC_XY_VEL_P_ACC 3
-param set-default MPC_XY_VEL_I_ACC 4
-param set-default MPC_XY_VEL_D_ACC 0.1
-
-param set-default NAV_ACC_RAD 5
-
-param set-default VT_FWD_THRUST_EN 4
-param set-default VT_F_TRANS_THR 0.75
-param set-default VT_MOT_ID 1234
-param set-default VT_FW_MOT_OFFID 1234
-param set-default VT_B_TRANS_DUR 8
-param set-default VT_TYPE 2
-
-
-# Gimbal
-param set-default PWM_MAIN_FUNC9 420
-param set-default PWM_MAIN_FUNC10 421
-param set-default PWM_MAIN_FUNC11 422
-
-param set-default RC_MAP_AUX1 8
-param set-default RC_MAP_AUX2 9
-param set-default RC_MAP_AUX3 10
-

ROMFS/px4fmu_common/init.d-posix/airframes/1043_standard_vtol_drop

@@ -0,0 +1,18 @@
+#!/bin/sh
+#
+# @name Standard VTOL
+#
+# @type Standard VTOL
+#
+
+. ${R}etc/init.d-posix/airframes/1040_standard_vtol
+
+# Gimbal
+param set-default PWM_MAIN_FUNC9 420
+param set-default PWM_MAIN_FUNC10 421
+param set-default PWM_MAIN_FUNC11 422
+
+param set-default RC_MAP_AUX1 8
+param set-default RC_MAP_AUX2 9
+param set-default RC_MAP_AUX3 10
+

ROMFS/px4fmu_common/init.d-posix/airframes/1044_gazebo-classic_plane_lidar

@@ -1,78 +0,0 @@
-#!/bin/sh
-#
-# @name Plane SITL with downward facing LIDAR.
-#
-
-. ${R}etc/init.d/rc.fw_defaults
-
-param set-default EKF2_MAG_ACCLIM 0
-param set-default EKF2_MAG_YAWLIM 0
-
-param set-default FW_LND_AIRSPD_SC 1
-param set-default FW_LND_ANG 8
-
-param set-default FW_L1_PERIOD 12
-
-param set-default FW_PR_P 0.9
-param set-default FW_PR_FF 0.5
-param set-default FW_PR_I 0.5
-param set-default TRIM_PITCH -0.15
-
-param set-default FW_PSP_OFF 2
-param set-default FW_P_LIM_MIN -15
-
-param set-default FW_RR_FF 0.5
-param set-default FW_RR_P 0.3
-param set-default FW_RR_I 0.5
-
-param set-default FW_YR_FF 0.5
-param set-default FW_YR_P 0.6
-param set-default FW_YR_I 0.5
-
-param set-default FW_SPOILERS_LND 0.4
-
-param set-default FW_THR_MAX 0.6
-param set-default FW_THR_MIN 0.05
-param set-default FW_THR_TRIM 0.25
-
-param set-default FW_T_CLMB_MAX 8
-param set-default FW_T_SINK_MAX 2.7
-param set-default FW_T_SINK_MIN 2.2
-
-param set-default FW_W_EN 1
-
-param set-default MIS_LTRMIN_ALT 30
-param set-default MIS_TAKEOFF_ALT 30
-
-param set-default NAV_ACC_RAD 15
-param set-default NAV_DLL_ACT 2
-
-param set-default RWTO_TKOFF 1
-
-param set-default CA_AIRFRAME 1
-
-param set-default CA_ROTOR_COUNT 1
-param set-default CA_ROTOR0_PX 0.3
-
-param set-default CA_SV_CS_COUNT 6
-param set-default CA_SV_CS0_TRQ_R -0.5
-param set-default CA_SV_CS0_TYPE 1
-param set-default CA_SV_CS1_TRQ_R 0.5
-param set-default CA_SV_CS1_TYPE 2
-param set-default CA_SV_CS2_TRQ_P 1.0
-param set-default CA_SV_CS2_TYPE 3
-param set-default CA_SV_CS3_TRQ_Y 1.0
-param set-default CA_SV_CS3_TYPE 4
-param set-default CA_SV_CS4_TYPE 9
-param set-default CA_SV_CS5_TYPE 10
-param set-default PWM_MAIN_FUNC3 204
-param set-default PWM_MAIN_FUNC4 205
-param set-default PWM_MAIN_FUNC5 101
-param set-default PWM_MAIN_FUNC6 201
-param set-default PWM_MAIN_FUNC7 202
-param set-default PWM_MAIN_FUNC8 203
-param set-default PWM_MAIN_FUNC9 206
-param set-default PWM_MAIN_REV 256
-
-
-param set-default FW_LND_USETER 1

ROMFS/px4fmu_common/init.d-posix/airframes/1044_plane_lidar

@@ -0,0 +1,9 @@
+#!/bin/sh
+#
+# @name Plane SITL with downward facing LIDAR.
+#
+
+. ${R}etc/init.d-posix/airframes/1030_plane
+
+param set-default FW_LND_USETER 1
+

ROMFS/px4fmu_common/init.d-posix/airframes/4002_gz_x500_depth

@@ -1,48 +0,0 @@
-#!/bin/sh
-#
-# @name Gazebo x500 depth
-#
-# @type Quadrotor
-#
-
-. ${R}etc/init.d/rc.mc_defaults
-
-PX4_SIMULATOR=${PX4_SIMULATOR:=gz}
-PX4_GZ_WORLD=${PX4_GZ_WORLD:=default}
-PX4_SIM_MODEL=${PX4_SIM_MODEL:=x500_depth}
-
-param set-default CA_AIRFRAME 0
-param set-default CA_ROTOR_COUNT 4
-
-param set-default CA_ROTOR0_PX 0.13
-param set-default CA_ROTOR0_PY 0.22
-param set-default CA_ROTOR0_KM  0.05
-
-param set-default CA_ROTOR1_PX -0.13
-param set-default CA_ROTOR1_PY -0.20
-param set-default CA_ROTOR1_KM  0.05
-
-param set-default CA_ROTOR2_PX 0.13
-param set-default CA_ROTOR2_PY -0.22
-param set-default CA_ROTOR2_KM -0.05
-
-param set-default CA_ROTOR3_PX -0.13
-param set-default CA_ROTOR3_PY 0.20
-param set-default CA_ROTOR3_KM -0.05
-
-param set-default SIM_GZ_FUNC1 101
-param set-default SIM_GZ_FUNC2 102
-param set-default SIM_GZ_FUNC3 103
-param set-default SIM_GZ_FUNC4 104
-
-param set-default SIM_GZ_MIN1 150
-param set-default SIM_GZ_MIN2 150
-param set-default SIM_GZ_MIN3 150
-param set-default SIM_GZ_MIN4 150
-
-param set-default SIM_GZ_MAX1 1000
-param set-default SIM_GZ_MAX2 1000
-param set-default SIM_GZ_MAX3 1000
-param set-default SIM_GZ_MAX4 1000
-
-param set-default MPC_THR_HOVER 0.60

ROMFS/px4fmu_common/init.d-posix/airframes/CMakeLists.txt

@@ -1,6 +1,6 @@
 ############################################################################
 #
-#   Copyright (c) 2020-2023 PX4 Development Team. All rights reserved.
+#   Copyright (c) 2020 PX4 Development Team. All rights reserved.
 #
 # Redistribution and use in source and binary forms, with or without
 # modification, are permitted provided that the following conditions
@@ -32,60 +32,54 @@
 ############################################################################
 
 px4_add_romfs_files(
+	10016_iris
+	10018_iris_foggy_lidar
+	10019_omnicopter
+	10030_px4vision
+	10040_quadx
+	10041_airplane
+	10042_xvert
+	1010_iris_opt_flow
+	1010_iris_opt_flow.post
+	1011_iris_irlock
+	1012_iris_rplidar
+	1013_iris_vision
+	1013_iris_vision.post
+	1015_iris_obs_avoid
+	1015_iris_obs_avoid.post
+	1017_iris_opt_flow_mockup
+	1018_iris_vision_velocity
+	1019_iris_dual_gps
+	1021_uuv_hippocampus
+	1022_uuv_bluerov2_heavy
+	1030_plane
+	1031_plane_cam
+	1032_plane_catapult
+	1033_rascal
+	1034_rascal-electric
+	1035_techpod
+	1036_malolo
+	1037_believer
+	1038_glider
+	1039_advanced_plane
+	1040_standard_vtol
+	1041_tailsitter
+	1042_tiltrotor
+	1043_standard_vtol_drop
+	1044_plane_lidar
+	1060_rover
+	1061_r1_rover
+	1062_tf-r1
+	1070_boat
+	3010_quadrotor_x
+	3011_hexarotor_x
 
-	1010_gazebo-classic_iris_opt_flow
-	1010_gazebo-classic_iris_opt_flow.post
-	1011_gazebo-classic_iris_irlock
-	1012_gazebo-classic_iris_rplidar
-	1013_gazebo-classic_iris_vision
-	1013_gazebo-classic_iris_vision.post
-	1015_gazebo-classic_iris_obs_avoid
-	1015_gazebo-classic_iris_obs_avoid.post
-	1017_gazebo-classic_iris_opt_flow_mockup
-	1019_gazebo-classic_iris_dual_gps
-	1021_gazebo-classic_uuv_hippocampus
-	1022_gazebo-classic_uuv_bluerov2_heavy
-	1030_gazebo-classic_plane
-	1031_gazebo-classic_plane_cam
-	1032_gazebo-classic_plane_catapult
-	1033_jsbsim_rascal
-	1034_flightgear_rascal-electric
-	1035_gazebo-classic_techpod
-	1036_jsbsim_malolo
-	1037_gazebo-classic_believer
-	1038_gazebo-classic_glider
-	1039_gazebo-classic_advanced_plane
-	1040_gazebo-classic_standard_vtol
-	1041_gazebo-classic_tailsitter
-	1042_gazebo-classic_tiltrotor
-	1043_gazebo-classic_standard_vtol_drop
-	1044_gazebo-classic_plane_lidar
-	1060_gazebo-classic_rover
-	1061_gazebo-classic_r1_rover
-	1062_flightgear_tf-r1
-	1070_gazebo-classic_boat
+	4001_x500
 
-	2507_gazebo-classic_cloudship
+	17001_tf-g1
+	17002_tf-g2
+	2507_cloudship
 
-	3010_jsbsim_quadrotor_x
-	3011_jsbsim_hexarotor_x
-
-	4001_gz_x500
-	4002_gz_x500_depth
-
-	6011_gazebo-classic_typhoon_h480
-	6011_gazebo-classic_typhoon_h480.post
-
-	10016_gazebo-classic_iris
-	10017_jmavsim_iris
-	10018_gazebo-classic_iris_foggy_lidar
-	10019_gazebo-classic_omnicopter
-	10030_gazebo-classic_px4vision
-
-	10040_sihsim_quadx
-	10041_sihsim_airplane
-	10042_sihsim_xvert
-
-	17001_flightgear_tf-g1
-	17002_flightgear_tf-g2
+	6011_typhoon_h480
+	6011_typhoon_h480.post
 )

ROMFS/px4fmu_common/init.d-posix/px4-rc.simulator

@@ -6,8 +6,6 @@ param set-default IMU_INTEG_RATE 250
 
 if [ "$PX4_SIMULATOR" = "sihsim" ] || [ "$(param show -q SYS_AUTOSTART)" -eq "0" ]; then
 
-	echo "INFO  [init] SIH simulator"
-
 	if simulator_sih start; then
 
 		sensor_baro_sim start
@@ -21,33 +19,16 @@ if [ "$PX4_SIMULATOR" = "sihsim" ] || [ "$(param show -q SYS_AUTOSTART)" -eq "0"
 
 elif [ "$PX4_SIMULATOR" = "gz" ]; then
 
-	# source generated gz_env.sh for IGN_GAZEBO_RESOURCE_PATH
-	if [ -f ./gz_env.sh ]; then
-		. ./gz_env.sh
+	# source generated gazebo_env.sh for IGN_GAZEBO_RESOURCE_PATH
+	if [ -f ./gazebo_env.sh ]; then
+		. ./gazebo_env.sh
 
-	elif [ -f ../gz_env.sh ]; then
-		. ../gz_env.sh
+	elif [ -f ../gazebo_env.sh ]; then
+		. ../gazebo_env.sh
 	fi
 
-	# "gz sim" only avaiilable in Garden and later
-	GZ_SIM_VERSIONS=$(gz sim --versions 2>&1)
-	if [ $? -eq 0 ] && [ "${GZ_SIM_VERSIONS}" != "" ]
-	then
-		# "gz sim" from Garden on
-		gz_command="gz"
-		gz_sub_command="sim"
-	else
-		IGN_GAZEBO_VERSIONS=$(ign gazebo --versions 2>&1)
-		if [ $? -eq 0 ] && [ "${IGN_GAZEBO_VERSIONS}" != "" ]
-		then
-			# "ign gazebo" for Fortress and earlier
-			gz_command="ign"
-			gz_sub_command="gazebo"
-		else
-			echo "ERROR [init] Gazebo gz and ign commands unavailable"
-			exit 1
-		fi
-	fi
+	gz_command="ign" # "ign" before garden
+	gz_sub_command="gazebo" # "gazebo" before garden
 
 	# look for running ${gz_command} gazebo world
 	gz_world=$( ${gz_command} topic -l | grep -m 1 -e "/world/.*/clock" | sed 's/\/world\///g; s/\/clock//g' )
@@ -60,8 +41,8 @@ elif [ "$PX4_SIMULATOR" = "gz" ]; then
 		${gz_command} ${gz_sub_command} --verbose=1 -r -s "${PX4_GZ_WORLDS}/${PX4_GZ_WORLD}.sdf" &
 
 		if [ -z "${HEADLESS}" ]; then
-			# HEADLESS not set, starting gui
-			${gz_command} ${gz_sub_command} -g &
+			# HEADLESS not set, starting ign gazebo gui
+			${gz_command} gazebo -g &
 		fi
 
 	else
@@ -90,7 +71,7 @@ elif [ "$PX4_SIMULATOR" = "gz" ]; then
 			sensor_mag_sim start
 
 		else
-			echo "ERROR [init] gz_bridge failed to start"
+			echo "ERROR [init] gazebo failed to start"
 			exit 1
 		fi
 
@@ -103,7 +84,7 @@ elif [ "$PX4_SIMULATOR" = "gz" ]; then
 			sensor_mag_sim start
 
 		else
-			echo "ERROR [init] gz_bridge failed to start"
+			echo "ERROR [init] gazebo failed to start"
 			exit 1
 		fi
 
@@ -111,13 +92,13 @@ elif [ "$PX4_SIMULATOR" = "gz" ]; then
 
 		echo "WARN  [init] PX4_GZ_MODEL_NAME or PX4_GZ_MODEL not set using PX4_SIM_MODEL."
 
-		if gz_bridge start -m "${PX4_SIM_MODEL#*gz_}" -w "${PX4_GZ_WORLD}" -i "${px4_instance}"; then
+		if gz_bridge start -m "${PX4_SIM_MODEL}" -w "${PX4_GZ_WORLD}" -i "${px4_instance}"; then
 			sensor_baro_sim start
 			sensor_gps_sim start
 			sensor_mag_sim start
 
 		else
-			echo "ERROR [init] gz_bridge failed to start"
+			echo "ERROR [init] gazebo failed to start"
 			exit 1
 		fi
 
@@ -126,20 +107,6 @@ elif [ "$PX4_SIMULATOR" = "gz" ]; then
 		exit 1
 	fi
 
-elif [ "$PX4_SIM_MODEL" = "jmavsim_iris" ] || [ "$(param show -q SYS_AUTOSTART)" -eq "10017" ]; then
-
-	echo "INFO  [init] jMAVSim simulator"
-
-	if jps | grep -i jmavsim; then
-		kill "$(jps | grep -i jmavsim | awk '{print $1}')" || true
-		sleep 1
-	fi
-
-	param set IMU_INTEG_RATE 250
-	./jmavsim_run.sh -l -r 250 &
-
-	simulator_mavlink start -h localhost $((4560+px4_instance))
-
 else
 	# otherwise start simulator (mavlink) module
 	simulator_tcp_port=$((4560+px4_instance))
@@ -150,15 +117,15 @@ else
 	if [ -z "${PX4_SIM_HOSTNAME}" ]; then
 
 		if [ -z "${PX4_SIM_HOST_ADDR}" ]; then
-			echo "INFO  [init] PX4_SIM_HOSTNAME: localhost"
+			echo "PX4 SIM HOST: localhost"
 			simulator_mavlink start -c $simulator_tcp_port
 		else
-			echo "INFO  [init] PX4_SIM_HOSTNAME: ${PX4_SIM_HOST_ADDR}"
+			echo "PX4 SIM HOST: ${PX4_SIM_HOST_ADDR}"
 			simulator_mavlink start -t "${PX4_SIM_HOST_ADDR}" "${simulator_tcp_port}"
 		fi
 
 	else
-		echo "INFO  [init] PX4_SIM_HOSTNAME: ${PX4_SIM_HOSTNAME}"
+		echo "PX4 SIM HOST: ${PX4_SIM_HOSTNAME}"
 		simulator_mavlink start -h "${PX4_SIM_HOSTNAME}" "${simulator_tcp_port}"
 	fi
 

ROMFS/px4fmu_common/init.d/rc.fw_apps

@@ -18,7 +18,6 @@ control_allocator start
 #
 # Start attitude controller.
 #
-fw_rate_control start
 fw_att_control start
 fw_pos_control_l1 start
 airspeed_selector start

ROMFS/px4fmu_common/init.d/rc.sensors

@@ -101,24 +101,12 @@ then
 	pmw3901 -S start
 fi
 
-# vl53l0x i2c distance sensor
-if param compare -s SENS_EN_VL53L0X 1
-then
-	vl53l0x start -X
-fi
-
 # vl53l1x i2c distance sensor
 if param compare -s SENS_EN_VL53L1X 1
 then
 	vl53l1x start -X
 fi
 
-# tf02 pro i2c distance sensor
-if param compare -s SENS_EN_TF02PRO 1
-then
-	tf02pro start -X
-fi
-
 # ADIS16448 spi external IMU
 if param compare -s SENS_EN_ADIS164X 1
 then

ROMFS/px4fmu_common/init.d/rc.vtol_apps

@@ -35,7 +35,6 @@ then
 	mc_autotune_attitude_control start
 fi
 
-fw_rate_control start vtol
 fw_att_control start vtol
 fw_pos_control_l1 start vtol
 fw_autotune_attitude_control start vtol

ROMFS/px4fmu_common/init.d/rcS

@@ -29,7 +29,6 @@ set LOGGER_ARGS ""
 set LOGGER_BUF 8
 set PARAM_FILE ""
 set PARAM_BACKUP_FILE ""
-set RC_INPUT_ARGS ""
 set SDCARD_AVAILABLE no
 set SDCARD_EXT_PATH /fs/microsd/ext_autostart
 set SDCARD_FORMAT no
@@ -350,7 +349,6 @@ else
 			simulator_sih start
 			sensor_baro_sim start
 			sensor_mag_sim start
-			sensor_gps_sim start
 		fi
 
 	else
@@ -412,8 +410,10 @@ else
 	#
 	. ${R}etc/init.d/rc.serial
 
-	# Must be started after the serial config is read
-	rc_input start $RC_INPUT_ARGS
+	if param compare -s RC_PPM_EN 1
+	then
+		ppm_in start
+	fi
 
 	#
 	# Play the startup tune (if not disabled or there is an error)
@@ -545,7 +545,6 @@ unset LOGGER_ARGS
 unset LOGGER_BUF
 unset PARAM_FILE
 unset PARAM_BACKUP_FILE
-unset RC_INPUT_ARGS
 unset SDCARD_AVAILABLE
 unset SDCARD_EXT_PATH
 unset SDCARD_FORMAT

Tools/setup/ubuntu.sh

@@ -14,6 +14,7 @@ set -e
 INSTALL_NUTTX="true"
 INSTALL_SIM="true"
 INSTALL_ARCH=`uname -m`
+INSTALL_SIM_JAMMY="false"
 
 # Parse arguments
 for arg in "$@"
@@ -25,6 +26,11 @@ do
 	if [[ $arg == "--no-sim-tools" ]]; then
 		INSTALL_SIM="false"
 	fi
+
+	if [[ $arg == "--sim_jammy" ]]; then
+		INSTALL_SIM_JAMMY="true"
+	fi
+
 done
 
 # detect if running in docker
@@ -65,7 +71,9 @@ elif [[ "${UBUNTU_RELEASE}" == "18.04" ]]; then
 elif [[ "${UBUNTU_RELEASE}" == "20.04" ]]; then
 	echo "Ubuntu 20.04"
 elif [[ "${UBUNTU_RELEASE}" == "22.04" ]]; then
-	echo "Ubuntu 22.04"
+	echo "Ubuntu 22.04, simulation build off by default." 
+	echo "Use --sim_jammy to enable simulation build."
+	INSTALL_SIM=$INSTALL_SIM_JAMMY
 fi
 
 
@@ -217,7 +225,7 @@ if [[ $INSTALL_SIM == "true" ]]; then
 	# Set Java 11 as default
 	sudo update-alternatives --set java $(update-alternatives --list java | grep "java-$java_version")
 
-	# Install Gazebo classic
+	# Gazebo
 	if [[ "${UBUNTU_RELEASE}" == "18.04" ]]; then
 		gazebo_version=9
 		gazebo_packages="gazebo$gazebo_version libgazebo$gazebo_version-dev"
@@ -254,17 +262,6 @@ if [[ $INSTALL_SIM == "true" ]]; then
 		# fix VMWare 3D graphics acceleration for gazebo
 		echo "export SVGA_VGPU10=0" >> ~/.profile
 	fi
-
-	# Install Gazebo
-	if [[ "${UBUNTU_RELEASE}" == "22.04" ]]; then
-		sudo sh -c 'echo "deb http://packages.osrfoundation.org/gazebo/ubuntu-stable `lsb_release -cs` main" > /etc/apt/sources.list.d/gazebo-stable.list'
-		wget http://packages.osrfoundation.org/gazebo.key -O - | sudo apt-key add -
-		# Update list, since new gazebo-stable.list has been added
-		sudo apt-get update -y --quiet
-		sudo DEBIAN_FRONTEND=noninteractive apt-get -y --quiet --no-install-recommends install \
-			ignition-fortress \
-			;
-	fi
 fi
 
 if [[ $INSTALL_NUTTX == "true" ]]; then

Tools/simulation/flightgear/sitl_run.sh

@@ -22,7 +22,7 @@ echo build_path: $build_path
 rootfs="$build_path/rootfs" # this is the working directory
 mkdir -p "$rootfs"
 
-export PX4_SIM_MODEL=flightgear_${model}
+export PX4_SIM_MODEL=${model}
 
 echo "FG setup"
 cd "${src_path}/Tools/simulation/flightgear/flightgear_bridge/"

Tools/simulation/gazebo/setup_gazebo.bash

@@ -16,9 +16,9 @@ SRC_DIR=$1
 BUILD_DIR=$2
 
 # setup Gazebo env and update package path
-export GAZEBO_PLUGIN_PATH=$GAZEBO_PLUGIN_PATH:${BUILD_DIR}/build_gazebo-classic
-export GAZEBO_MODEL_PATH=$GAZEBO_MODEL_PATH:${SRC_DIR}/Tools/simulation/gazebo-classic/sitl_gazebo-classic/models
-export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:${BUILD_DIR}/build_gazebo-classic
+export GAZEBO_PLUGIN_PATH=$GAZEBO_PLUGIN_PATH:${BUILD_DIR}/build_gazebo
+export GAZEBO_MODEL_PATH=$GAZEBO_MODEL_PATH:${SRC_DIR}/Tools/simulation/gazebo/sitl_gazebo/models
+export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:${BUILD_DIR}/build_gazebo
 
 echo -e "GAZEBO_PLUGIN_PATH $GAZEBO_PLUGIN_PATH"
 echo -e "GAZEBO_MODEL_PATH $GAZEBO_MODEL_PATH"

Tools/simulation/gazebo/sitl_multiple_run.sh

@@ -1,10 +1,10 @@
 #!/bin/bash
 # run multiple instances of the 'px4' binary, with the gazebo SITL simulation
-# It assumes px4 is already built, with 'make px4_sitl_default sitl_gazebo-classic'
+# It assumes px4 is already built, with 'make px4_sitl_default gazebo'
 
 # The simulator is expected to send to TCP port 4560+i for i in [0, N-1]
 # For example gazebo can be run like this:
-#./Tools/simulation/gazebo-classic/sitl_multiple_run.sh -n 10 -m iris
+#./Tools/simulation/gazebo/sitl_multiple_run.sh -n 10 -m iris
 
 function cleanup() {
 	pkill -x px4
@@ -35,7 +35,7 @@ function spawn_model() {
 	pushd "$working_dir" &>/dev/null
 	echo "starting instance $N in $(pwd)"
 	$build_path/bin/px4 -i $N -d "$build_path/etc" >out.log 2>err.log &
-	python3 ${src_path}/Tools/simulation/gazebo-classic/sitl_gazebo-classic/scripts/jinja_gen.py ${src_path}/Tools/simulation/gazebo-classic/sitl_gazebo-classic/models/${MODEL}/${MODEL}.sdf.jinja ${src_path}/Tools/simulation/gazebo-classic/sitl_gazebo-classic --mavlink_tcp_port $((4560+${N})) --mavlink_udp_port $((14560+${N})) --mavlink_id $((1+${N})) --gst_udp_port $((5600+${N})) --video_uri $((5600+${N})) --mavlink_cam_udp_port $((14530+${N})) --output-file /tmp/${MODEL}_${N}.sdf
+	python3 ${src_path}/Tools/simulation/gazebo/sitl_gazebo/scripts/jinja_gen.py ${src_path}/Tools/simulation/gazebo/sitl_gazebo/models/${MODEL}/${MODEL}.sdf.jinja ${src_path}/Tools/simulation/gazebo/sitl_gazebo --mavlink_tcp_port $((4560+${N})) --mavlink_udp_port $((14560+${N})) --mavlink_id $((1+${N})) --gst_udp_port $((5600+${N})) --video_uri $((5600+${N})) --mavlink_cam_udp_port $((14530+${N})) --output-file /tmp/${MODEL}_${N}.sdf
 
 	echo "Spawning ${MODEL}_${N} at ${X} ${Y}"
 
@@ -69,7 +69,7 @@ num_vehicles=${NUM_VEHICLES:=3}
 world=${WORLD:=empty}
 target=${TARGET:=px4_sitl_default}
 vehicle_model=${VEHICLE_MODEL:="iris"}
-export PX4_SIM_MODEL=gazebo-classic_${vehicle_model}
+export PX4_SIM_MODEL=${vehicle_model}
 
 echo ${SCRIPT}
 SCRIPT_DIR="$( cd "$( dirname "${BASH_SOURCE[0]}" )" && pwd )"
@@ -84,7 +84,7 @@ pkill -x px4 || true
 
 sleep 1
 
-source ${src_path}/Tools/simulation/gazebo-classic/setup_gazebo.bash ${src_path} ${src_path}/build/${target}
+source ${src_path}/Tools/simulation/gazebo/setup_gazebo.bash ${src_path} ${src_path}/build/${target}
 
 # To use gazebo_ros ROS2 plugins
 if [[ -n "$ROS_VERSION" ]] && [ "$ROS_VERSION" == "2" ]; then
@@ -94,7 +94,7 @@ else
 fi
 
 echo "Starting gazebo"
-gzserver ${src_path}/Tools/simulation/gazebo-classic/sitl_gazebo-classic/worlds/${world}.world --verbose $ros_args &
+gzserver ${src_path}/Tools/simulation/gazebo/sitl_gazebo/worlds/${world}.world --verbose $ros_args &
 sleep 5
 
 n=0
@@ -126,7 +126,7 @@ else
 
 		m=0
 		while [ $m -lt ${target_number} ]; do
-			export PX4_SIM_MODEL=gazebo-classic_${target_vehicle}
+			export PX4_SIM_MODEL=${target_vehicle}
 			spawn_model ${target_vehicle}${LABEL} $n $target_x $target_y
 			m=$(($m + 1))
 			n=$(($n + 1))

Tools/simulation/gazebo/sitl_run.sh

@@ -67,7 +67,7 @@ fi
 # be running from last time
 pkill -x gazebo || true
 
-export PX4_SIM_MODEL=gazebo-classic_${model}
+export PX4_SIM_MODEL=${model}
 export PX4_SIM_WORLD=${world}
 
 SIM_PID=0
@@ -75,27 +75,31 @@ SIM_PID=0
 if [ -x "$(command -v gazebo)" ]; then
 	# Get the model name
 	model_name="${model}"
+	# Check if a 'modelname-gen.sdf' file exist for the models using jinja and generating the SDF files
+	if [ -f "${src_path}/Tools/simulation/gazebo/sitl_gazebo/models/${model}/${model}-gen.sdf" ]; then
+		model_name="${model}-gen"
+	fi
 
 	# Set the plugin path so Gazebo finds our model and sim
-	source "$src_path/Tools/simulation/gazebo-classic/setup_gazebo.bash" "${src_path}" "${build_path}"
+	source "$src_path/Tools/simulation/gazebo/setup_gazebo.bash" "${src_path}" "${build_path}"
 	if [ -z $PX4_SITL_WORLD ]; then
 		#Spawn predefined world
 		if [ "$world" == "none" ]; then
-			if [ -f ${src_path}/Tools/simulation/gazebo-classic/sitl_gazebo-classic/worlds/${model}.world ]; then
+			if [ -f ${src_path}/Tools/simulation/gazebo/sitl_gazebo/worlds/${model}.world ]; then
 				echo "empty world, default world ${model}.world for model found"
-				world_path="${src_path}/Tools/simulation/gazebo-classic/sitl_gazebo-classic/worlds/${model}.world"
+				world_path="${src_path}/Tools/simulation/gazebo/sitl_gazebo/worlds/${model}.world"
 			else
 				echo "empty world, setting empty.world as default"
-				world_path="${src_path}/Tools/simulation/gazebo-classic/sitl_gazebo-classic/worlds/empty.world"
+				world_path="${src_path}/Tools/simulation/gazebo/sitl_gazebo/worlds/empty.world"
 			fi
 		else
 			#Spawn empty world if world with model name doesn't exist
-			world_path="${src_path}/Tools/simulation/gazebo-classic/sitl_gazebo-classic/worlds/${world}.world"
+			world_path="${src_path}/Tools/simulation/gazebo/sitl_gazebo/worlds/${world}.world"
 		fi
 	else
-		if [ -f ${src_path}/Tools/simulation/gazebo-classic/sitl_gazebo-classic/worlds/${PX4_SITL_WORLD}.world ]; then
+		if [ -f ${src_path}/Tools/simulation/gazebo/sitl_gazebo/worlds/${PX4_SITL_WORLD}.world ]; then
 			# Spawn world by name if exists in the worlds directory from environment variable
-			world_path="${src_path}/Tools/simulation/gazebo-classic/sitl_gazebo-classic/worlds/${PX4_SITL_WORLD}.world"
+			world_path="${src_path}/Tools/simulation/gazebo/sitl_gazebo/worlds/${PX4_SITL_WORLD}.world"
 		else
 			# Spawn world from environment variable with absolute path
 			world_path="$PX4_SITL_WORLD"