lib/matrix: inline common Vector3f operators

PX4 ROS2 msg conformity and explicit topics
- .msg files are PascalCase - topics are still either per msg or explicitly listed in TOPICS - compatible structs are still generated (eg struct msg_s), but ROS2 style px4::msg::Msg is also available
2026-05-28 04:00:04 +08:00 · 2022-01-21 12:53:26 -05:00 · 2022-01-21 09:32:30 -05:00
1115 changed files with 20552 additions and 29676 deletions
@@ -60,8 +60,6 @@ pipeline {
                     "holybro_kakutef7_default",
                     "holybro_pix32v5_default",
                     "matek_h743-slim",
-                     "matek_gnss-m9n-f4_canbootloader",
-                     "matek_gnss-m9n-f4_default",
                     "modalai_fc-v1_default",
                     "modalai_fc-v1_rtps",
                     "modalai_fc-v2_default",
@@ -73,8 +73,10 @@ pipeline {
                }
              }
              post {
+                failure {
+                  sh 'cat /tmp/pyserial_spy_file.txt'
+                }
                always {
-                  sh 'cat /tmp/pyserial_spy_file.txt || true'
                  sh './platforms/nuttx/Debug/jlink_gdb_backtrace_simple.sh build/cubepilot_cubeorange_test/cubepilot_cubeorange_test.elf || true'
                }
              }
@@ -143,8 +145,10 @@ pipeline {
                }
              }
              post {
+                failure {
+                  sh 'cat /tmp/pyserial_spy_file.txt'
+                }
                always {
-                  sh 'cat /tmp/pyserial_spy_file.txt || true'
                  sh './platforms/nuttx/Debug/jlink_gdb_backtrace_simple.sh build/cuav_x7pro_test/cuav_x7pro_test.elf || true'
                }
              }
@@ -213,8 +217,10 @@ pipeline {
                }
              }
              post {
+                failure {
+                  sh 'cat /tmp/pyserial_spy_file.txt'
+                }
                always {
-                  sh 'cat /tmp/pyserial_spy_file.txt || true'
                  sh './platforms/nuttx/Debug/jlink_gdb_backtrace_simple.sh build/px4_fmu-v3_test/px4_fmu-v3_test.elf || true'
                }
              }
@@ -282,8 +288,10 @@ pipeline {
                }
              }
              post {
+                failure {
+                  sh 'cat /tmp/pyserial_spy_file.txt'
+                }
                always {
-                  sh 'cat /tmp/pyserial_spy_file.txt || true'
                  sh './platforms/nuttx/Debug/jlink_gdb_backtrace_simple.sh build/px4_fmu-v4_test/px4_fmu-v4_test.elf || true'
                }
              }
@@ -352,8 +360,10 @@ pipeline {
                }
              }
              post {
+                failure {
+                  sh 'cat /tmp/pyserial_spy_file.txt'
+                }
                always {
-                  sh 'cat /tmp/pyserial_spy_file.txt || true'
                  sh './platforms/nuttx/Debug/jlink_gdb_backtrace_simple.sh build/px4_fmu-v4pro_test/px4_fmu-v4pro_test.elf || true'
                }
              }
@@ -442,8 +452,10 @@ pipeline {
                }
              }
              post {
+                failure {
+                  sh 'cat /tmp/pyserial_spy_file.txt'
+                }
                always {
-                  sh 'cat /tmp/pyserial_spy_file.txt || true'
                  sh './platforms/nuttx/Debug/jlink_gdb_backtrace_simple.sh build/px4_fmu-v5_debug/px4_fmu-v5_debug.elf || true'
                }
              }
@@ -524,8 +536,10 @@ pipeline {
                }
              }
              post {
+                failure {
+                  sh 'cat /tmp/pyserial_spy_file.txt'
+                }
                always {
-                  sh 'cat /tmp/pyserial_spy_file.txt || true'
                  sh './platforms/nuttx/Debug/jlink_gdb_backtrace_simple.sh build/px4_fmu-v5_stackcheck/px4_fmu-v5_stackcheck.elf || true'
                }
              }
@@ -594,8 +608,10 @@ pipeline {
                }
              }
              post {
+                failure {
+                  sh 'cat /tmp/pyserial_spy_file.txt'
+                }
                always {
-                  sh 'cat /tmp/pyserial_spy_file.txt || true'
                  sh './platforms/nuttx/Debug/jlink_gdb_backtrace_simple.sh build/px4_fmu-v5_test/px4_fmu-v5_test.elf || true'
                }
              }
@@ -664,8 +680,10 @@ pipeline {
                }
              }
              post {
+                failure {
+                  sh 'cat /tmp/pyserial_spy_file.txt'
+                }
                always {
-                  sh 'cat /tmp/pyserial_spy_file.txt || true'
                  sh './platforms/nuttx/Debug/jlink_gdb_backtrace_simple.sh build/nxp_fmuk66-v3_test/nxp_fmuk66-v3_test.elf || true'
                }
              }
@@ -775,7 +793,7 @@ void checkStatus() {
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "top once"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "uavcan status" || true'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "uorb status" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "uorb top -1 -a" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "uorb top -1 -a"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "ver all"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "work_queue status"'
  // stop logger
@@ -791,7 +809,7 @@ void resetParameters() {
 void runTests() {

  // test loading a range of airframes
-  sh './Tools/HIL/test_airframes.sh `find /dev/serial -name *usb-*` 1000 1001 2100 3000 4001 6001 8001 10016'
+  sh './Tools/HIL/test_airframes.sh `find /dev/serial -name *usb-*` 1000 1001 2100 3000 4001 4018 6001 8001 10016'

  resetParameters()

@@ -844,7 +862,7 @@ void runTests() {
 void printTopics() {
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "ls /obj"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "uorb status"'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "uorb top -1 -a" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "uorb top -1 -a"'

  // these are for casually inspecting the system, output failure doesn't matter
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener actuator_armed" || true'
@@ -861,7 +879,7 @@ void printTopics() {
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener cpuload" || true'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener distance_sensor" || true'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener ekf2_timestamps" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_gps_status" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener ekf_gps_drift" || true'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener esc_status" || true'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_attitude" || true'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_baro_bias" || true'
@@ -36,7 +36,6 @@ jobs:
          holybro_kakuteh7,
          holybro_pix32v5,
          matek_h743-slim,
-          matek_gnss-m9n-f4,
          modalai_fc-v1,
          modalai_fc-v2,
          mro_ctrl-zero-f7,
@@ -31,6 +31,11 @@ CONFIG:
      buildType: RelWithDebInfo
      settings:
        CONFIG: px4_sitl_test
+    px4_ros2_default:
+      short: px4_ros2
+      buildType: RelWithDebInfo
+      settings:
+        CONFIG: px4_ros2_default
    px4_io-v2_default:
      short: px4_io-v2
      buildType: MinSizeRel
@@ -196,16 +201,6 @@ CONFIG:
      buildType: MinSizeRel
      settings:
        CONFIG: matek_h743-slim_default
-    matek_gnss-m9n-f4_canbootloader:
-      short: matek_gnss-m9n-f4_canbootloader
-      buildType: MiniSizeRel
-      settings:
-        CONFIG: matek_m9nf4can_canbootloader
-    matek_gnss-m9n-f4_default:
-      short: matek_gnss-m9n-f4_default
-      buildType: MiniSizeRel
-      settings:
-        CONFIG: matek_gnss-m9n-f4_default
    modalai_fc-v1_default:
      short: modalai_fc-v1
      buildType: MinSizeRel
@@ -6,7 +6,7 @@
        "C_Cpp.autoAddFileAssociations": false,
        "C_Cpp.clang_format_fallbackStyle": "none",
        "C_Cpp.default.browse.limitSymbolsToIncludedHeaders": true,
-        "C_Cpp.default.cppStandard": "c++14",
+        "C_Cpp.default.cppStandard": "c++17",
        "C_Cpp.default.cStandard": "c11",
        "C_Cpp.formatting": "Disabled",
        "C_Cpp.intelliSenseEngine": "Default",
@@ -121,6 +121,7 @@
                "variant": "cpp",
                "vector": "cpp"
        },
+        "ros.distro": "foxy",
        "search.exclude": {
                "${workspaceFolder}/build": true
        },
@@ -136,5 +137,7 @@
        "yaml.schemas": {
                "${workspaceFolder}/validation/module_schema.yaml": "${workspaceFolder}/src/modules/*/module.yaml"
        },
-        "cortex-debug.openocdPath": "${env:PICO_SDK_PATH}/../openocd/src/openocd"       // Added for rp2040
+        "python.autoComplete.extraPaths": [
+                "/opt/ros/foxy/lib/python3.8/site-packages"
+        ]
 }
@@ -101,6 +101,8 @@

 cmake_minimum_required(VERSION 3.2 FATAL_ERROR)

+cmake_policy(SET CMP0058 NEW)
+
 set(PX4_SOURCE_DIR "${CMAKE_CURRENT_SOURCE_DIR}" CACHE FILEPATH "PX4 source directory" FORCE)
 set(PX4_BINARY_DIR "${CMAKE_CURRENT_BINARY_DIR}" CACHE FILEPATH "PX4 binary directory" FORCE)

@@ -124,12 +126,6 @@ define_property(GLOBAL PROPERTY PX4_MODULE_LIBRARIES
                 BRIEF_DOCS "PX4 module libs"
                 FULL_DOCS "List of all PX4 module libraries"
                 )
-
-define_property(GLOBAL PROPERTY PX4_KERNEL_MODULE_LIBRARIES
-                 BRIEF_DOCS "PX4 kernel side module libs"
-                 FULL_DOCS "List of all PX4 kernel module libraries"
-                 )
-
 define_property(GLOBAL PROPERTY PX4_MODULE_PATHS
                 BRIEF_DOCS "PX4 module paths"
                 FULL_DOCS "List of paths to all PX4 modules"
@@ -138,30 +134,40 @@ define_property(GLOBAL PROPERTY PX4_SRC_FILES
                 BRIEF_DOCS "src files from all PX4 modules & libs"
                 FULL_DOCS "SRC files from px4_add_{module,library}"
                 )
-
+define_property(GLOBAL PROPERTY PX4_PUBLICATIONS
+                 BRIEF_DOCS "PX4 publication topics"
+                 FULL_DOCS "List of topics published by PX4 modules"
+                 )
+define_property(GLOBAL PROPERTY PX4_SUBSCRIPTIONS
+                 BRIEF_DOCS "PX4 subscription topics"
+                 FULL_DOCS "List of topics subscribed by PX4 modules"
+                 )
 #=============================================================================
 # configuration
 #

-set(CONFIG "px4_sitl_default" CACHE STRING "desired configuration")
+# default to px4_ros2_default if building within a ROS2 colcon environment
+if((DEFINED ENV{COLCON_PREFIX_PATH}) AND (DEFINED ENV{ROS_VERSION}))
+	if("$ENV{ROS_VERSION}" MATCHES "2")
+		message(STATUS "ROS_VERSION: $ENV{ROS_VERSION}")
+		set(CONFIG "px4_ros2_default" CACHE STRING "desired configuration") # TODO
+	endif()
+endif()
+
+if(NOT CONFIG)
+	set(CONFIG "px4_sitl_default" CACHE STRING "desired configuration")
+endif()

 include(px4_add_module)
 set(config_module_list)
-set(config_kernel_list)

 # Find Python
-# If using catkin, Python 2 is found since it points
-# to the Python libs installed with the ROS distro
-if (NOT CATKIN_DEVEL_PREFIX)
-	find_package(PythonInterp 3)
-	# We have a custom error message to tell users how to install python3.
-	if (NOT PYTHONINTERP_FOUND)
-		message(FATAL_ERROR "Python 3 not found. Please install Python 3:\n"
-			"    Ubuntu: sudo apt install python3 python3-dev python3-pip\n"
-			"    macOS: brew install python")
-	endif()
-else()
-	find_package(PythonInterp REQUIRED)
+find_package(PythonInterp 3)
+# We have a custom error message to tell users how to install python3.
+if(NOT PYTHONINTERP_FOUND)
+	message(FATAL_ERROR "Python 3 not found. Please install Python 3:\n"
+		"    Ubuntu: sudo apt install python3 python3-dev python3-pip\n"
+		"    macOS: brew install python")
 endif()

 option(PYTHON_COVERAGE "Python code coverage" OFF)
@@ -197,10 +203,6 @@ set_property(GLOBAL PROPERTY PX4_MODULE_CONFIG_FILES)
 include(platforms/${PX4_PLATFORM}/cmake/px4_impl_os.cmake)
 list(APPEND CMAKE_MODULE_PATH ${PX4_SOURCE_DIR}/platforms/${PX4_PLATFORM}/cmake)

-if(EXISTS "${PX4_SOURCE_DIR}/platforms/${PX4_PLATFORM}/cmake/init.cmake")
-	include(init)
-endif()
-
 # CMake build type (Debug Release RelWithDebInfo MinSizeRel Coverage)
 if(NOT CMAKE_BUILD_TYPE)
 	if(${PX4_PLATFORM} STREQUAL "nuttx")
@@ -236,7 +238,7 @@ project(px4 CXX C ASM)

 set(package-contact "px4users@googlegroups.com")

-set(CMAKE_CXX_STANDARD 14)
+set(CMAKE_CXX_STANDARD 17)
 set(CMAKE_CXX_STANDARD_REQUIRED ON)
 set(CMAKE_C_STANDARD 11)
 set(CMAKE_C_STANDARD_REQUIRED ON)
@@ -252,6 +254,10 @@ else()
 	SET(BUILD_SHARED_LIBS OFF)
 endif()

+if(EXISTS "${PX4_SOURCE_DIR}/platforms/${PX4_PLATFORM}/cmake/init.cmake")
+	include(init)
+endif()
+
 #=============================================================================

 # gold linker - use if available (posix only for now)
@@ -321,13 +327,6 @@ if(NOT PX4_CHIP)
 	message(FATAL_ERROR "px4_os_determine_build_chip() needs to set PX4_CHIP")
 endif()

-#=============================================================================
-# build flags
-#
-include(px4_add_common_flags)
-px4_add_common_flags()
-px4_os_add_flags()
-
 #=============================================================================
 # board cmake init (optional)
 #
@@ -335,6 +334,13 @@ if(EXISTS ${PX4_BOARD_DIR}/cmake/init.cmake)
 	include(${PX4_BOARD_DIR}/cmake/init.cmake)
 endif()

+#=============================================================================
+# build flags
+#
+include(px4_add_common_flags)
+px4_add_common_flags()
+px4_os_add_flags()
+
 #=============================================================================
 # message, and airframe generation
 #
@@ -412,13 +418,17 @@ endif()
 # subdirectories
 #
 add_library(parameters_interface INTERFACE)
-add_library(kernel_parameters_interface INTERFACE)

 include(px4_add_library)
 add_subdirectory(src/lib EXCLUDE_FROM_ALL)

-add_subdirectory(platforms/${PX4_PLATFORM}/src/px4)
-add_subdirectory(platforms EXCLUDE_FROM_ALL)
+add_subdirectory(platforms/${PX4_PLATFORM}/src/px4 EXCLUDE_FROM_ALL)
+
+if(${PX4_PLATFORM} MATCHES "ros2") # TODO: fix
+	add_subdirectory(platforms/common/work_queue EXCLUDE_FROM_ALL)
+else()
+	add_subdirectory(platforms EXCLUDE_FROM_ALL)
+endif()

 if(EXISTS "${PX4_BOARD_DIR}/CMakeLists.txt")
 	add_subdirectory(${PX4_BOARD_DIR})
@@ -435,17 +445,131 @@ add_subdirectory(src/lib/metadata EXCLUDE_FROM_ALL)

 # must be the last module before firmware
 add_subdirectory(src/lib/parameters EXCLUDE_FROM_ALL)
-
-if(${PX4_PLATFORM} STREQUAL "nuttx" AND NOT CONFIG_BUILD_FLAT)
-target_link_libraries(parameters_interface INTERFACE usr_parameters)
-target_link_libraries(kernel_parameters_interface INTERFACE parameters)
-else()
 target_link_libraries(parameters_interface INTERFACE parameters)
-endif()

 # firmware added last to generate the builtin for included modules
 add_subdirectory(platforms/${PX4_PLATFORM})

+
+set(PX4_ORB_TOPIC_COUNT 0)
+
+if(${PX4_PLATFORM} MATCHES "ros2") # TODO: fix
+
+	configure_file(${CMAKE_SOURCE_DIR}/build/px4_fmu-v5x_default/uORBTopics.cpp ${CMAKE_BINARY_DIR}/uORBTopics.cpp COPYONLY)
+	configure_file(${CMAKE_SOURCE_DIR}/build/px4_fmu-v5x_default/uORBTopics.hpp ${CMAKE_BINARY_DIR}/uORBTopics.hpp COPYONLY)
+
+	set(PX4_ORB_TOPIC_COUNT 1)
+
+else()
+
+	get_property(publications GLOBAL PROPERTY PX4_PUBLICATIONS)
+	get_property(subscriptions GLOBAL PROPERTY PX4_SUBSCRIPTIONS)
+
+	# TODO: for now combine subsriptions and publications for complete topic list
+	list(APPEND publications ${subscriptions})
+
+	list(SORT publications)
+	list(REMOVE_DUPLICATES publications)
+
+	set(pub_all_topics)
+	set(PX4_MSG_TYPE_ID)
+	set(PX4_MSG_TOPIC_ID)
+	set(PX4_MSG_TOPIC_ID_STRING)
+	set(PX4_MSG_TOPIC_ORB_ID)
+
+	set(PX4_ORB_DECLARE_STR)
+	set(PX4_ORB_DEFINE_STR)
+	set(PX4_ORB_HEADER_INCLUDE_STR)
+
+
+	foreach(pub ${publications})
+		#message(STATUS "pub: ${pub}")
+		string(REPLACE " /" ";" pub ${pub})
+
+		list(GET pub 0 pub_type)
+		list(GET pub 1 pub_topic)
+
+		string(REPLACE "::" ";" pub_type_split ${pub_type})
+		list(GET pub_type_split 2 pub_type_simple_lower)
+
+		# Pascal case to snake case (PubType -> pub_type)
+		string(REGEX REPLACE "(.)([A-Z][a-z]+)" "\\1_\\2" pub_type_simple_lower "${pub_type_simple_lower}")
+		string(REGEX REPLACE "([a-z0-9])([A-Z])" "\\1_\\2" pub_type_simple_lower "${pub_type_simple_lower}")
+		string(TOLOWER "${pub_type_simple_lower}" pub_type_simple_lower)
+
+		#message(STATUS "pub: Type: ${pub_type}, Topic: ${pub_topic} (${pub_type_simple_lower})")
+
+
+
+
+		# pub_type to include path (eg px4::msg::VehicleStatus => px4/msg/vehicle_status.hpp)
+		#  temporary create px4/msg/vehicle_status.hpp which simply includes <uORB/topics/vehicle_status.h>
+
+
+
+
+		list(APPEND pub_all_topics ${pub_topic})
+
+		list(APPEND PX4_MSG_TYPE_ID ${pub_type})
+
+		#list(APPEND PX4_MSG_TOPIC_ID ${pub_topic})
+		set(PX4_MSG_TOPIC_ID "${PX4_MSG_TOPIC_ID}\t${pub_topic},\n")
+		#set(PX4_MSG_TOPIC_ID_STRING "${PX4_MSG_TOPIC_ID_STRING}\t"case ORB_ID::${pub_topic}: return \"${pub_topic}\";"\n")
+		set(PX4_MSG_TOPIC_ORB_ID "${PX4_MSG_TOPIC_ORB_ID}\tORB_ID(${pub_topic}),\n")
+
+		list(APPEND PX4_MSG_TOPIC_ID_STRING
+			"case ORB_ID::${pub_topic}: return \"${pub_topic}\";\n"
+		)
+
+		# PX4_MSG_TYPE_ID
+		# PX4_MSG_TOPIC_ID
+
+		# .h  ORB_DECLARE(actuator_controls_0);
+		# .c  ORB_DEFINE(actuator_controls_0, struct actuator_controls_s, 48, __orb_actuator_controls_fields, static_cast<uint8_t>(ORB_ID::actuator_controls_0));
+
+
+		set(PX4_ORB_DECLARE_STR
+			"${PX4_ORB_DECLARE_STR}ORB_DECLARE(${pub_topic});\n")
+
+		# ORB_DEFINE(actuator_armed, struct actuator_armed_s, 16, __orb_actuator_armed_fields, static_cast<uint8_t>(ORB_ID::actuator_armed));
+		set(PX4_ORB_DEFINE_STR
+			"${PX4_ORB_DEFINE_STR}ORB_DEFINE(${pub_topic}, ${pub_type}, px4_embedded::${pub_type_simple_lower}_s::SIZE_NO_PADDING, px4_embedded::${pub_type_simple_lower}_s::FIELDS, static_cast<uint8_t>(ORB_ID::${pub_topic}));\n")
+
+		set(PX4_ORB_HEADER_INCLUDE_STR
+			"${PX4_ORB_HEADER_INCLUDE_STR}#include <uORB/topics/${pub_type_simple_lower}.h>\n")
+
+		math(EXPR PX4_ORB_TOPIC_COUNT "${PX4_ORB_TOPIC_COUNT}+1")
+
+	endforeach()
+	list(REMOVE_DUPLICATES PX4_MSG_TYPE_ID)
+	#list(REMOVE_DUPLICATES PX4_MSG_TOPIC_ID)
+
+	#message(STATUS "PX4_MSG_TYPE_ID: ${PX4_MSG_TYPE_ID}")
+	#message(STATUS "PX4_MSG_TOPIC_ID: ${PX4_MSG_TOPIC_ID}")
+
+	if(PX4_ORB_TOPIC_COUNT GREATER 0)
+		configure_file(uORBTopics.cpp.in ${CMAKE_BINARY_DIR}/uORBTopics.cpp)
+		configure_file(uORBTopics.hpp.in ${CMAKE_BINARY_DIR}/uORBTopics.hpp)
+	endif()
+
+	# .hpp enum ORB_ID
+	# .cpp struct orb_metadat ORB_ID() array
+
+	foreach(f ${msg_files})
+		#message(STATUS "MSG: ${f}")
+	endforeach()
+endif()
+
+if(PX4_ORB_TOPIC_COUNT GREATER 0)
+	add_library(uorb_msgs ${uorb_headers} ${CMAKE_BINARY_DIR}/uORBTopics.cpp ${CMAKE_BINARY_DIR}/uORBTopics.hpp)
+	add_dependencies(uorb_msgs prebuild_targets uorb_headers)
+endif()
+
+if(${PX4_PLATFORM} MATCHES "ros2") # TODO: fix
+	ament_target_dependencies(uorb_msgs rclcpp std_msgs)
+	rosidl_target_interfaces(uorb_msgs ${PROJECT_NAME} "rosidl_typesupport_cpp")
+endif()
+
 #=============================================================================
 # uORB graph generation: add a custom target 'uorb_graph'
 #
@@ -473,17 +597,13 @@ include(doxygen)
 include(metadata)
 include(package)

-# print size
-add_custom_target(size
-	COMMAND size $<TARGET_FILE:px4>
-	DEPENDS px4
-	WORKING_DIRECTORY ${PX4_BINARY_DIR}
-	USES_TERMINAL
-	)
-
 # install python requirements using configured python
 add_custom_target(install_python_requirements
 	COMMAND ${PYTHON_EXECUTABLE} -m pip install --requirement ${PX4_SOURCE_DIR}/Tools/setup/requirements.txt
 	DEPENDS ${PX4_SOURCE_DIR}/Tools/setup/requirements.txt
 	USES_TERMINAL
 )
+
+if(EXISTS "${PX4_SOURCE_DIR}/platforms/${PX4_PLATFORM}/cmake/finalize.cmake")
+	include(finalize)
+endif()
@@ -17,6 +17,8 @@ menu "Toolchain"
            bool "posix"
        config PLATFORM_QURT
            bool "qurt"
+        config PLATFORM_ROS2
+            bool "ros2"
    endchoice

    config BOARD_PLATFORM
@@ -24,6 +26,7 @@ menu "Toolchain"
        default "nuttx" if PLATFORM_NUTTX
        default "posix" if PLATFORM_POSIX
        default "qurt" if PLATFORM_QURT
+        default "ros2" if PLATFORM_ROS2

    config BOARD_LOCKSTEP
        bool "Force enable lockstep"
@@ -118,11 +121,6 @@ config BOARD_CRYPTO
    help
        Enable PX4 Crypto Support. Select the implementation under drivers

-config BOARD_PROTECTED
-    bool "Memory protection"
-    help
-        Enable memory protection via MPU/MMU
-
 menu "Serial ports"

    config BOARD_SERIAL_URT6
@@ -479,7 +479,7 @@ clang-tidy-quiet: px4_sitl_default-clang
 # TODO: Fix cppcheck errors then try --enable=warning,performance,portability,style,unusedFunction or --enable=all
 cppcheck: px4_sitl_default
 	@mkdir -p "$(SRC_DIR)"/build/cppcheck
-	@cppcheck -i"$(SRC_DIR)"/src/examples --enable=performance --std=c++14 --std=c99 --std=posix --project="$(SRC_DIR)"/build/px4_sitl_default/compile_commands.json --xml-version=2 2> "$(SRC_DIR)"/build/cppcheck/cppcheck-result.xml > /dev/null
+	@cppcheck -i"$(SRC_DIR)"/src/examples --enable=performance --std=c++17 --std=c99 --std=posix --project="$(SRC_DIR)"/build/px4_sitl_default/compile_commands.json --xml-version=2 2> "$(SRC_DIR)"/build/cppcheck/cppcheck-result.xml > /dev/null
 	@cppcheck-htmlreport --source-encoding=ascii --file="$(SRC_DIR)"/build/cppcheck/cppcheck-result.xml --report-dir="$(SRC_DIR)"/build/cppcheck --source-dir="$(SRC_DIR)"/src/

 shellcheck_all:
@@ -8,5 +8,8 @@
 # disable circuit breaker for airspeed sensor
 param set-default CBRK_AIRSPD_CHK 162128

+set MAV_TYPE 12
+param set MAV_TYPE ${MAV_TYPE}
+
 set MIXER_FILE etc/mixers-sitl/uuv_x_sitl.main.mix
 set MIXER custom
@@ -8,5 +8,8 @@
 # disable circuit breaker for airspeed sensor
 param set-default CBRK_AIRSPD_CHK 162128

+set MAV_TYPE 12
+param set MAV_TYPE ${MAV_TYPE}
+
 set MIXER_FILE etc/mixers-sitl/uuv_x_sitl.main.mix
 set MIXER custom
@@ -67,3 +67,4 @@ param set-default PWM_MAIN_FUNC7 107
 param set-default PWM_MAIN_FUNC8 108

 set MIXER skip
+
@@ -44,8 +44,6 @@ param set-default MIS_TAKEOFF_ALT 30
 param set-default NAV_ACC_RAD 15
 param set-default NAV_DLL_ACT 2

-param set-default FW_USE_NPFG 1
-
 param set-default RWTO_TKOFF 1

 set MIXER_FILE etc/mixers-sitl/plane_sitl.main.mix
@@ -10,7 +10,7 @@
 # param set-default SYS_CTRL_ALLOC 1
 param set-default CA_AIRFRAME 2

-param set-default CA_ROTOR_COUNT 5
+param set-default CA_ROTOR_COUNT 4
 param set-default CA_ROTOR0_PX 0.1515
 param set-default CA_ROTOR0_PY 0.245
 param set-default CA_ROTOR0_KM 0.05
@@ -23,9 +23,6 @@ param set-default CA_ROTOR2_KM -0.05
 param set-default CA_ROTOR3_PX -0.1515
 param set-default CA_ROTOR3_PY 0.1875
 param set-default CA_ROTOR3_KM -0.05
-param set-default CA_ROTOR4_AX 1.0
-param set-default CA_ROTOR4_AZ 0.0
-param set-default CA_ROTOR4_PX 0.2

 param set-default CA_SV_CS_COUNT 3
 param set-default CA_SV_CS0_TYPE 1
@@ -80,5 +77,7 @@ param set-default VT_FW_MOT_OFFID 1234
 param set-default VT_B_TRANS_DUR 8
 param set-default VT_TYPE 2

+set MAV_TYPE 22
+
 set MIXER_FILE etc/mixers-sitl/standard_vtol_sitl.main.mix
 set MIXER custom
@@ -7,8 +7,6 @@

 . ${R}etc/init.d/rc.vtol_defaults

-param set-default MAV_TYPE 20
-
 # param set-default SYS_CTRL_ALLOC 1
 param set-default CA_AIRFRAME 4

@@ -80,5 +78,7 @@ param set-default VT_TYPE 0

 param set-default WV_EN 0

+set MAV_TYPE 20
+
 set MIXER_FILE etc/mixers-sitl/quad_x_vtol.main.mix
 set MIXER custom
@@ -7,8 +7,6 @@

 . ${R}etc/init.d/rc.vtol_defaults

-param set-default MAV_TYPE 21
-
 # param set-default SYS_CTRL_ALLOC 1
 param set-default CA_AIRFRAME 3

@@ -90,5 +88,7 @@ param set-default VT_MOT_ID 1234
 param set-default VT_TILT_TRANS 0.6
 param set-default VT_TYPE 1

+set MAV_TYPE 21
+
 set MIXER_FILE etc/mixers-sitl/tiltrotor_sitl.main.mix
 set MIXER custom
@@ -51,5 +51,7 @@ param set-default RC_MAP_AUX1 8
 param set-default RC_MAP_AUX2 9
 param set-default RC_MAP_AUX3 10

+set MAV_TYPE 22
+
 set MIXER_FILE etc/mixers-sitl/standard_vtol_sitl.main.mix
 set MIXER custom
@@ -37,4 +37,6 @@ param set-default PWM_MAIN_FUNC2 201
 param set-default PWM_MAIN_FUNC6 101
 param set-default PWM_MAIN_FUNC7 101

+set MAV_TYPE 10
+
 set MIXER_FILE skip
@@ -37,4 +37,6 @@ param set-default PWM_MAIN_FUNC2 101
 param set-default PWM_MAIN_FUNC6 102
 param set-default PWM_MAIN_FUNC7 102

+set MAV_TYPE 10
+
 set MIXER_FILE skip
@@ -10,8 +10,6 @@

 . ${R}etc/init.d/rc.rover_defaults

-param set-default MAV_TYPE 10
-
 param set-default GND_L1_DIST 5
 param set-default GND_SP_CTRL_MODE 1
 param set-default GND_SPEED_D 3
@@ -35,4 +33,6 @@ param set-default CBRK_AIRSPD_CHK 162128
 param set-default GND_MAX_ANG 0.6
 param set-default GND_WHEEL_BASE 3.0

+set MAV_TYPE 10
+
 set MIXER_FILE etc/mixers-sitl/rover_ackermann_sitl.main.mix
@@ -47,4 +47,6 @@ param set-default CA_R_REV 3
 param set-default PWM_MAIN_FUNC1 101
 param set-default PWM_MAIN_FUNC2 102

+set MAV_TYPE 11
+
 set MIXER skip
@@ -9,8 +9,6 @@

 . ${R}etc/init.d/rc.mc_defaults

-param set-default MAV_TYPE 13
-
 param set-default MC_PITCHRATE_P 0.1
 param set-default MC_PITCHRATE_I 0.05
 param set-default MC_PITCH_P 6.0
@@ -26,4 +24,6 @@ param set-default TRIG_MODE 4
 param set-default MNT_MODE_IN 4
 param set-default MNT_DO_STAB 2

+set MAV_TYPE 13
+
 set MIXER hexa_x
@@ -7,8 +7,6 @@

 . ${R}etc/init.d/rc.mc_defaults

-param set-default MAV_TYPE 13
-
 param set-default MC_PITCHRATE_P 0.0800
 param set-default MC_PITCHRATE_I 0.0400
 param set-default MC_PITCHRATE_D 0.0010
@@ -28,4 +26,6 @@ param set-default MNT_MODE_IN 4
 param set-default MNT_MODE_OUT 2
 param set-default MAV_PROTO_VER 2

+set MAV_TYPE 13
+
 set MIXER hexa_x
@@ -7,8 +7,6 @@

 . ${R}etc/init.d/rc.mc_defaults

-param set-default MAV_TYPE 13
-
 param set-default SYS_CTRL_ALLOC 1

 param set-default MC_PITCHRATE_P 0.0800
@@ -60,5 +58,7 @@ param set-default PWM_MAIN_FUNC4 104
 param set-default PWM_MAIN_FUNC5 105
 param set-default PWM_MAIN_FUNC6 106

+set MAV_TYPE 13
+
 set MIXER skip
 set MIXER_AUX none
@@ -10,7 +10,7 @@ fi

 if [ ! -f replay_params.txt ]; then
 	echo "Creating $(pwd)/replay_params.txt"
-	ulog_params -i "${replay}" -l ' ' | grep -e '^EKF2' > replay_params.txt
+	ulog_params -i "${replay}" -d ' ' | grep -e '^EKF2' > replay_params.txt
 fi

 publisher_rules_file="orb_publisher.rules"
@@ -21,7 +21,6 @@ ignore_others: false
 EOF

 param set SDLOG_DIRS_MAX 7
-param set SDLOG_PROFILE 3

 # apply all params before ekf starts, as some params cannot be changed after startup
 replay tryapplyparams
@@ -24,6 +24,7 @@ fi

 # initialize script variables
 set IO_PRESENT                  no
+set MAV_TYPE                    none
 set MIXER                       none
 set MIXER_AUX                   none
 set MIXER_FILE                  none
@@ -233,7 +234,7 @@ fi

 if param greater -s MNT_MODE_IN -1
 then
-	gimbal start
+	vmount start
 fi

 if param greater -s TRIG_MODE 0
@@ -39,26 +39,6 @@ param set-default FW_RR_P 0.3

 param set-default RWTO_TKOFF 1

-param set-default CA_AIRFRAME 1
-param set-default CA_ROTOR_COUNT 1
-param set-default CA_ROTOR0_PX 0.3
-param set-default CA_SV_CS_COUNT 4
-param set-default CA_SV_CS0_TRQ_R 0.5
-param set-default CA_SV_CS0_TYPE 2
-param set-default CA_SV_CS1_TRQ_P 1.0
-param set-default CA_SV_CS1_TYPE 3
-param set-default CA_SV_CS2_TRQ_Y 1.0
-param set-default CA_SV_CS2_TYPE 4
-param set-default CA_SV_CS3_TYPE 10
-
-param set-default HIL_ACT_REV 2
-param set-default HIL_ACT_FUNC1 201
-param set-default HIL_ACT_FUNC2 202
-param set-default HIL_ACT_FUNC3 203
-param set-default HIL_ACT_FUNC4 101
-param set-default HIL_ACT_FUNC5 204
-param set-default HIL_ACT_FUNC6 400
-
 param set SYS_HITL 1

 # disable some checks to allow to fly
@@ -36,5 +36,4 @@ param set-default MC_PITCHRATE_P 0.19
 param set-default MC_PITCHRATE_I 0.05
 param set-default MC_PITCHRATE_D 0.004
 param set-default MC_YAW_P 4
-
 set MIXER quad_w
@@ -15,23 +15,6 @@ set MIXER quad_x

 param set SYS_HITL 1

-param set-default CA_ROTOR_COUNT 4
-param set-default CA_ROTOR0_PX 0.15
-param set-default CA_ROTOR0_PY 0.15
-param set-default CA_ROTOR1_PX -0.15
-param set-default CA_ROTOR1_PY -0.15
-param set-default CA_ROTOR2_PX 0.15
-param set-default CA_ROTOR2_PY -0.15
-param set-default CA_ROTOR2_KM -0.05
-param set-default CA_ROTOR3_PX -0.15
-param set-default CA_ROTOR3_PY 0.15
-param set-default CA_ROTOR3_KM -0.05
-
-param set-default HIL_ACT_FUNC1 101
-param set-default HIL_ACT_FUNC2 102
-param set-default HIL_ACT_FUNC3 103
-param set-default HIL_ACT_FUNC4 104
-
 # disable some checks to allow to fly
 # - with usb
 param set-default CBRK_USB_CHK 197848
@@ -61,37 +61,6 @@ param set-default VT_MOT_ID 1234
 param set-default VT_FW_MOT_OFFID 1234
 param set-default VT_TYPE 2

-param set-default CA_AIRFRAME 2
-param set-default CA_ROTOR_COUNT 5
-param set-default CA_ROTOR0_PX 0.15
-param set-default CA_ROTOR0_PY 0.15
-param set-default CA_ROTOR1_PX -0.15
-param set-default CA_ROTOR1_PY -0.15
-param set-default CA_ROTOR2_PX 0.15
-param set-default CA_ROTOR2_PY -0.15
-param set-default CA_ROTOR2_KM -0.05
-param set-default CA_ROTOR3_PX -0.15
-param set-default CA_ROTOR3_PY 0.15
-param set-default CA_ROTOR3_KM -0.05
-param set-default CA_ROTOR4_AX 1.0
-param set-default CA_ROTOR4_AZ 0.0
-param set-default CA_ROTOR4_PX 0.2
-
-param set-default CA_SV_CS_COUNT 3
-param set-default CA_SV_CS1_TRQ_R 0.5
-param set-default CA_SV_CS1_TYPE 2
-param set-default CA_SV_CS2_TRQ_P 1.0
-param set-default CA_SV_CS2_TYPE 3
-
-param set-default HIL_ACT_FUNC1 101
-param set-default HIL_ACT_FUNC2 102
-param set-default HIL_ACT_FUNC3 103
-param set-default HIL_ACT_FUNC4 104
-param set-default HIL_ACT_FUNC5 105
-param set-default HIL_ACT_FUNC6 201
-param set-default HIL_ACT_FUNC7 202
-param set-default HIL_ACT_FUNC8 203
-

 param set SYS_HITL 1

@@ -104,7 +73,7 @@ param set-default CBRK_SUPPLY_CHK 894281
 param set-default COM_PREARM_MODE 0
 param set-default CBRK_IO_SAFETY 22027

-param set-default MAV_TYPE 22
+set MAV_TYPE 22

 set MIXER standard_vtol_hitl

@@ -17,23 +17,6 @@ set PWM_OUT 1234

 param set UAVCAN_ENABLE 0

-param set-default CA_ROTOR_COUNT 4
-param set-default CA_ROTOR0_PX 0.15
-param set-default CA_ROTOR0_PY 0.15
-param set-default CA_ROTOR1_PX -0.15
-param set-default CA_ROTOR1_PY -0.15
-param set-default CA_ROTOR2_PX 0.15
-param set-default CA_ROTOR2_PY -0.15
-param set-default CA_ROTOR2_KM -0.05
-param set-default CA_ROTOR3_PX -0.15
-param set-default CA_ROTOR3_PY 0.15
-param set-default CA_ROTOR3_KM -0.05
-
-param set-default HIL_ACT_FUNC1 101
-param set-default HIL_ACT_FUNC2 102
-param set-default HIL_ACT_FUNC3 103
-param set-default HIL_ACT_FUNC4 104
-
 # set SYS_HITL to 2 to start the SIH and avoid sensors startup
 param set SYS_HITL 2

@@ -17,26 +17,6 @@ set PWM_OUT 1234

 param set UAVCAN_ENABLE 0

-param set-default CA_AIRFRAME 1
-param set-default CA_ROTOR_COUNT 1
-param set-default CA_ROTOR0_PX 0.3
-param set-default CA_SV_CS_COUNT 4
-param set-default CA_SV_CS0_TRQ_R 0.5
-param set-default CA_SV_CS0_TYPE 2
-param set-default CA_SV_CS1_TRQ_P 1.0
-param set-default CA_SV_CS1_TYPE 3
-param set-default CA_SV_CS2_TRQ_Y 1.0
-param set-default CA_SV_CS2_TYPE 4
-param set-default CA_SV_CS3_TYPE 10
-
-param set-default HIL_ACT_REV 2
-param set-default HIL_ACT_FUNC1 201
-param set-default HIL_ACT_FUNC2 202
-param set-default HIL_ACT_FUNC3 203
-param set-default HIL_ACT_FUNC4 101
-param set-default HIL_ACT_FUNC5 204
-param set-default HIL_ACT_FUNC6 400
-
 # set SYS_HITL to 2 to start the SIH and avoid sensors startup
 param set-default SYS_HITL 2

@@ -26,28 +26,8 @@ param set-default VT_FW_DIFTHR_SC 0.3
 param set-default MPC_MAN_Y_MAX 60
 param set-default MC_PITCH_P 5

-param set-default CA_AIRFRAME 4
-param set-default CA_ROTOR_COUNT 2
-param set-default CA_ROTOR0_KM -0.05
-param set-default CA_ROTOR0_PY 0.2
-param set-default CA_ROTOR1_KM -0.05
-param set-default CA_ROTOR1_PY -0.2
-param set-default CA_SV_CS_COUNT 2
-param set-default CA_SV_CS0_TRQ_P 0.3
-param set-default CA_SV_CS0_TRQ_Y 0.3
-param set-default CA_SV_CS0_TYPE 5
-param set-default CA_SV_CS1_TRQ_P 0.3
-param set-default CA_SV_CS1_TRQ_Y -0.3
-param set-default CA_SV_CS1_TYPE 6
-
-param set-default HIL_ACT_FUNC1 101
-param set-default HIL_ACT_FUNC2 102
-param set-default HIL_ACT_FUNC5 202
-param set-default HIL_ACT_FUNC6 201
-param set-default HIL_ACT_REV 32
-
 param set-default MAV_TYPE 19
-
+set MAV_TYPE 19
 set MIXER vtol_tailsitter_duo_sat

 set PWM_OUT 1234
@@ -24,38 +24,13 @@

 . ${R}etc/init.d/rc.vtol_defaults

-param set-default CA_AIRFRAME 2
-param set-default CA_ROTOR_COUNT 5
-param set-default CA_ROTOR0_PX 0.15
-param set-default CA_ROTOR0_PY 0.15
-param set-default CA_ROTOR1_PX -0.15
-param set-default CA_ROTOR1_PY -0.15
-param set-default CA_ROTOR2_PX 0.15
-param set-default CA_ROTOR2_PY -0.15
-param set-default CA_ROTOR2_KM -0.05
-param set-default CA_ROTOR3_PX -0.15
-param set-default CA_ROTOR3_PY 0.15
-param set-default CA_ROTOR3_KM -0.05
-param set-default CA_ROTOR4_AX 1.0
-param set-default CA_ROTOR4_AZ 0.0
-param set-default CA_ROTOR4_PX 0.2
-param set-default CA_SV_CS_COUNT 4
-param set-default CA_SV_CS0_TYPE 1
-param set-default CA_SV_CS0_TRQ_R -0.5
-param set-default CA_SV_CS1_TYPE 2
-param set-default CA_SV_CS1_TRQ_R 0.5
-param set-default CA_SV_CS2_TYPE 3
-param set-default CA_SV_CS2_TRQ_P 1.0
-param set-default CA_SV_CS3_TRQ_Y 1.0
-param set-default CA_SV_CS3_TYPE 4

 param set-default PWM_AUX_DIS5 950

 param set-default VT_TYPE 2
 param set-default VT_MOT_ID 1234
 param set-default VT_FW_MOT_OFFID 1234
-
-param set-default MAV_TYPE 22
+set MAV_TYPE 22

 set MIXER quad_x
 set MIXER_AUX vtol_AAERT
@@ -19,6 +19,7 @@

 . ${R}etc/init.d/rc.vtol_defaults

+
 param set-default MAV_TYPE 19

 param set-default MC_ROLL_P 6
@@ -37,6 +38,7 @@ param set-default VT_IDLE_PWM_MC  1080
 param set-default VT_ELEV_MC_LOCK 0
 param set-default VT_MOT_ID 12
 param set-default VT_TYPE 0
+set MAV_TYPE 19

 set MIXER vtol_tailsitter_duo

@@ -23,7 +23,6 @@

 . ${R}etc/init.d/rc.vtol_defaults

-param set-default MAV_TYPE 21

 param set-default MC_ROLL_P 7
 param set-default MC_ROLLRATE_P 0.19
@@ -46,6 +45,7 @@ param set-default VT_TILT_TRANS 0.5
 param set-default VT_TILT_FW 0.9
 param set-default VT_ELEV_MC_LOCK 0
 param set-default VT_TYPE 1
+set MAV_TYPE 21

 set MIXER firefly6
 set MIXER_AUX firefly6
@@ -13,33 +13,13 @@

 . ${R}etc/init.d/rc.vtol_defaults

-param set-default MAV_TYPE 20
-
-param set-default CA_AIRFRAME 4
-param set-default CA_ROTOR_COUNT 4
-param set-default CA_ROTOR0_PX 0.15
-param set-default CA_ROTOR0_PY 0.15
-param set-default CA_ROTOR1_PX -0.15
-param set-default CA_ROTOR1_PY -0.15
-param set-default CA_ROTOR2_PX 0.15
-param set-default CA_ROTOR2_PY -0.15
-param set-default CA_ROTOR2_KM -0.05
-param set-default CA_ROTOR3_PX -0.15
-param set-default CA_ROTOR3_PY 0.15
-param set-default CA_ROTOR3_KM -0.05
-param set-default CA_SV_CS_COUNT 2
-param set-default CA_SV_CS0_TRQ_P 0.5
-param set-default CA_SV_CS0_TRQ_Y 0.5
-param set-default CA_SV_CS0_TYPE 5
-param set-default CA_SV_CS1_TRQ_P 0.5
-param set-default CA_SV_CS1_TRQ_Y -0.5
-param set-default CA_SV_CS1_TYPE 6

 param set-default PWM_MAIN_MAX 2000

 param set-default VT_MOT_ID 1234
 param set-default VT_IDLE_PWM_MC  1080
 param set-default VT_TYPE 0
+set MAV_TYPE 20

 set MIXER quad_x_vtol

@@ -22,13 +22,13 @@

 . ${R}etc/init.d/rc.vtol_defaults

-param set-default MAV_TYPE 20
-
 param set-default PWM_MAIN_MAX 2000

 param set-default VT_IDLE_PWM_MC  1080
 param set-default VT_TYPE 0

+set MAV_TYPE 20
+
 set MIXER quad_+_vtol

 set PWM_OUT 1234
@@ -52,6 +52,7 @@ param set-default VT_MOT_ID 1234
 param set-default VT_FW_MOT_OFFID 1234
 param set-default VT_IDLE_PWM_MC 1080
 param set-default VT_TYPE 2
+set MAV_TYPE 22

 set MIXER quad_x
 set MIXER_AUX vtol_AAERT
@@ -41,6 +41,7 @@ param set-default VT_FW_MOT_OFFID 1234
 param set-default VT_F_TRANS_THR 0.75
 param set-default VT_IDLE_PWM_MC 1080
 param set-default VT_TYPE 2
+set MAV_TYPE 22

 set MIXER quad_x
 set MIXER_AUX vtol_delta
@@ -33,6 +33,7 @@ param set-default VT_MOT_ID 1234
 param set-default VT_FW_MOT_OFFID 1234
 param set-default VT_IDLE_PWM_MC 1080
 param set-default VT_TYPE 2
+set MAV_TYPE 22

 set MIXER quad_x
 set MIXER_AUX vtol_AAVVT
@@ -46,6 +46,7 @@ param set-default VT_IDLE_PWM_MC 1080
 param set-default VT_MOT_ID 1234
 param set-default VT_FW_MOT_OFFID 1234
 param set-default VT_TYPE 2
+set MAV_TYPE 22

 set MIXER quad_x
 set MIXER_AUX vtol_AAERT
@@ -77,6 +77,8 @@ param set-default VT_TRANS_MIN_TM 5
 param set-default VT_TRANS_TIMEOUT    30
 param set-default VT_TYPE 2

+set MAV_TYPE 22
+
 set MIXER quad_x
 set MIXER_AUX vtol_AAERT

@@ -13,8 +13,6 @@

 . ${R}etc/init.d/rc.vtol_defaults

-param set-defualt MAV_TYPE 21
-
 param set-default PWM_AUX_DISARM 1000
 param set-default PWM_AUX_MAX 2000
 param set-default PWM_AUX_MIN 1000
@@ -30,6 +28,7 @@ param set-default VT_TILT_MC 0.08
 param set-default VT_TILT_TRANS 0.5
 param set-default VT_ELEV_MC_LOCK 0
 param set-default VT_TYPE 1
+set MAV_TYPE 21

 set MIXER claire
 set MIXER_AUX claire
@@ -22,8 +22,6 @@

 . ${R}etc/init.d/rc.vtol_defaults

-param set-defualt MAV_TYPE 21
-
 param set-default CBRK_AIRSPD_CHK 162128

 param set-default FW_ARSP_MODE 1
@@ -66,6 +64,7 @@ param set-default VT_TRANS_MIN_TM 1.2
 param set-default VT_TRANS_P2_DUR 1.3
 param set-default VT_ELEV_MC_LOCK 0
 param set-default VT_TYPE 1
+set MAV_TYPE 21

 set MIXER vtol_convergence

@@ -22,8 +22,6 @@

 . ${R}etc/init.d/rc.vtol_defaults

-param set-default MAV_TYPE 22
-
 param set-default BAT1_CAPACITY 23000
 param set-default BAT1_N_CELLS 4
 param set-default BAT1_R_INTERNAL 0.0025
@@ -136,6 +134,7 @@ param set-default VT_TRANS_TIMEOUT 22
 param set-default VT_F_TRANS_RAMP 4

 param set-default COM_RC_OVERRIDE 0
+set MAV_TYPE 22

 set MIXER deltaquad
 set MIXER_AUX pass
@@ -23,8 +23,6 @@

 . ${R}etc/init.d/rc.vtol_defaults

-param set-default MAV_TYPE 22
-
 param set-default BAT1_N_CELLS 6

 param set-default FW_AIRSPD_MAX 30
@@ -96,6 +94,8 @@ param set-default VT_PSHER_RMP_DT 2
 param set-default VT_TRANS_MIN_TM 4
 param set-default VT_TYPE 2

+set MAV_TYPE 22
+
 set MIXER babyshark
 set MIXER_AUX pass

@@ -27,37 +27,11 @@

 . ${R}etc/init.d/rc.vtol_defaults

-param set-default MAV_TYPE 21
-
 param set-default VT_IDLE_PWM_MC 1100
 param set-default VT_TYPE 1
 param set-default VT_MOT_ID 1234
 param set-default VT_FW_MOT_OFFID 24
-
-param set-default CA_AIRFRAME 3
-param set-default CA_ROTOR_COUNT 4
-param set-default CA_ROTOR0_PX 0.15
-param set-default CA_ROTOR0_PY 0.15
-param set-default CA_ROTOR0_TILT 1
-param set-default CA_ROTOR1_PX -0.15
-param set-default CA_ROTOR1_PY -0.15
-param set-default CA_ROTOR1_TILT 2
-param set-default CA_ROTOR2_PX 0.15
-param set-default CA_ROTOR2_PY -0.15
-param set-default CA_ROTOR2_KM -0.05
-param set-default CA_ROTOR2_TILT 3
-param set-default CA_ROTOR3_PX -0.15
-param set-default CA_ROTOR3_PY 0.15
-param set-default CA_ROTOR3_KM -0.05
-param set-default CA_ROTOR3_TILT 4
-param set-default CA_SV_CS_COUNT 4
-param set-default CA_SV_CS1_TRQ_R 0.5
-param set-default CA_SV_CS1_TYPE 2
-param set-default CA_SV_CS2_TRQ_P 1.0
-param set-default CA_SV_CS2_TYPE 3
-param set-default CA_SV_CS3_TRQ_Y 1.0
-param set-default CA_SV_CS3_TYPE 4
-param set-default CA_SV_TL_COUNT 4
+set MAV_TYPE 21

 set MIXER quad_x
 set MIXER_AUX vtol_TTTTAAER
@@ -31,6 +31,7 @@ param set-default PWM_AUX_DIS5 950
 param set-default VT_TYPE 2
 param set-default VT_MOT_ID 12345678
 param set-default VT_FW_MOT_OFFID 12345678
+set MAV_TYPE 22

 set MIXER octo_cox
 set MIXER_AUX vtol_AAERT
@@ -19,26 +19,12 @@

 . ${R}etc/init.d/rc.vtol_defaults

-param set-default MAV_TYPE 19
-
 param set-default VT_ELEV_MC_LOCK 0
 param set-default VT_MOT_COUNT 2
 param set-default VT_TYPE 0

-param set-default CA_AIRFRAME 4
-param set-default CA_ROTOR_COUNT 2
-param set-default CA_ROTOR0_KM -0.05
-param set-default CA_ROTOR0_PY 0.2
-param set-default CA_ROTOR1_KM -0.05
-param set-default CA_ROTOR1_PY -0.2
-param set-default CA_SV_CS_COUNT 2
-param set-default CA_SV_CS0_TRQ_P 0.5
-param set-default CA_SV_CS0_TRQ_Y 0.5
-param set-default CA_SV_CS0_TYPE 5
-param set-default CA_SV_CS1_TRQ_P 0.5
-param set-default CA_SV_CS1_TRQ_Y -0.5
-param set-default CA_SV_CS1_TYPE 6
-
+param set-default MAV_TYPE 19
+set MAV_TYPE 19
 set MIXER vtol_tailsitter_duo

 set PWM_OUT 1234
@@ -18,7 +18,4 @@

 . ${R}etc/init.d/rc.mc_defaults

-# MAV_TYPE_TRICOPTER 15
-param set-default MAV_TYPE 15
-
 set MIXER tri_y_yaw+
@@ -18,7 +18,4 @@

 . ${R}etc/init.d/rc.mc_defaults

-# MAV_TYPE_TRICOPTER 15
-param set-default MAV_TYPE 15
-
 set MIXER tri_y_yaw-
@@ -17,9 +17,7 @@
 #

 . ${R}etc/init.d/rc.mc_defaults
-
-# MAV_TYPE_COAXIAL 3
-param set-default MAV_TYPE 3
+set MIXER coax

 param set-default MC_ROLLRATE_P 0.17
 param set-default MC_ROLLRATE_I 0.05
@@ -38,9 +36,6 @@ param set-default PWM_MAIN_RATE 400

 param set-default RTL_RETURN_ALT 30
 param set-default RTL_DESCEND_ALT 10
-
-set MIXER coax
-
 # This is the gimbal pass mixer
 set MIXER_AUX pass

@@ -20,7 +20,7 @@
 . ${R}etc/init.d/rc.mc_defaults

 # Configure as helicopter (number 4 defined in commander_helper.cpp)
-param set-default MAV_TYPE 4
+set MAV_TYPE 4

 set MIXER blade130

@@ -41,6 +41,5 @@ param set-default FW_R_LIM 40
 param set-default FW_P_LIM_MAX 25
 param set-default FW_P_LIM_MIN -5
 param set-default FW_P_RMAX_NEG 20
-
 set MIXER TF-G2
 set MIXER_AUX pass
@@ -24,5 +24,8 @@ param set-default MAV_0_CONFIG 102
 param set-default GPS_UBX_DYNMODEL 8
 param set-default SER_TEL2_BAUD 9600

+set MAV_TYPE 8
+param set MAV_TYPE ${MAV_TYPE}
+
 set MIXER IO_pass
 set MIXER_AUX pass
@@ -23,18 +23,6 @@

 . ${R}etc/init.d/rc.fw_defaults

-param set-default CA_AIRFRAME 1
-param set-default CA_ROTOR_COUNT 1
-param set-default CA_ROTOR0_PX 0.3
-param set-default CA_SV_CS_COUNT 4
-param set-default CA_SV_CS0_TRQ_R -0.5
-param set-default CA_SV_CS1_TRQ_R 0.5
-param set-default CA_SV_CS1_TYPE 2
-param set-default CA_SV_CS2_TRQ_P 1.0
-param set-default CA_SV_CS2_TYPE 3
-param set-default CA_SV_CS3_TRQ_Y 1.0
-param set-default CA_SV_CS3_TYPE 4
-
 param set-default PWM_AUX_RATE 50
 param set-default PWM_MAIN_RATE 50

@@ -26,7 +26,7 @@
 # @board px4_fmu-v2 exclude
 #

-. ${R}etc/init.d/rc.mc_defaults
+set VEHICLE_TYPE mc

 param set-default NAV_ACC_RAD 2

@@ -39,7 +39,6 @@ param set-default PWM_MAIN_RATE 400

 param set-default RTL_DESCEND_ALT 10
 param set-default RTL_RETURN_ALT 30
-
 set MIXER dodeca_top_cox
 set MIXER_AUX dodeca_bottom_cox

@@ -41,6 +41,9 @@ param set-default FW_RR_P 0.04

 param set-default PWM_MAIN_DISARM 1000

+# Configure this as plane.
+set MAV_TYPE 1
+
 # Set mixer.
 set MIXER fw_generic_wing

@@ -21,16 +21,3 @@
 #

 . ${R}etc/init.d/rc.mc_defaults
-
-param set-default CA_ROTOR_COUNT 4
-param set-default CA_ROTOR0_PX 0.15
-param set-default CA_ROTOR0_PY 0.15
-param set-default CA_ROTOR1_PX -0.15
-param set-default CA_ROTOR1_PY -0.15
-param set-default CA_ROTOR2_PX 0.15
-param set-default CA_ROTOR2_PY -0.15
-param set-default CA_ROTOR2_KM -0.05
-param set-default CA_ROTOR3_PX -0.15
-param set-default CA_ROTOR3_PY 0.15
-param set-default CA_ROTOR3_KM -0.05
-
@@ -0,0 +1,39 @@
+#!/bin/sh
+#
+# @name S500 with control allocation
+#
+# @type Quadrotor x
+# @class Copter
+#
+# @maintainer Silvan Fuhrer
+#
+# @board px4_fmu-v2 exclude
+#
+
+. ${R}etc/init.d/rc.mc_defaults
+
+set MIXER skip
+set MIXER_AUX none
+
+param set-default SYS_CTRL_ALLOC 1
+
+param set-default CA_AIRFRAME 0
+
+param set-default CA_ROTOR_COUNT 4
+param set-default CA_ROTOR0_PX 0.177
+param set-default CA_ROTOR0_PY 0.177
+param set-default CA_ROTOR0_KM 0.05
+param set-default CA_ROTOR1_PX -0.177
+param set-default CA_ROTOR1_PY -0.177
+param set-default CA_ROTOR1_KM 0.05
+param set-default CA_ROTOR2_PX 0.177
+param set-default CA_ROTOR2_PY -0.177
+param set-default CA_ROTOR2_KM -0.05
+param set-default CA_ROTOR3_PX -0.177
+param set-default CA_ROTOR3_PY 0.177
+param set-default CA_ROTOR3_KM -0.05
+
+param set-default PWM_MAIN_FUNC1 101
+param set-default PWM_MAIN_FUNC2 102
+param set-default PWM_MAIN_FUNC3 103
+param set-default PWM_MAIN_FUNC4 104
@@ -24,6 +24,8 @@

 set MIXER quad_s250aq

+set MAV_TYPE 2
+
 param set-default ATT_BIAS_MAX 0

 param set-default CBRK_IO_SAFETY 22027
@@ -46,7 +46,7 @@ param set-default COM_RC_LOSS_T 3


 # ekf2
-param set-default EKF2_AID_MASK 33
+param set-default EKF2_AID_MASK 35
 param set-default EKF2_BARO_DELAY 0
 param set-default EKF2_BARO_NOISE 2.0

@@ -147,7 +147,7 @@ param set-default MPC_Z_VEL_P 0.27


 # gimbal configuration
-param set-default MNT_MODE_IN 0
+param set-default MNT_MODE_IN 1
 param set-default MNT_MODE_OUT 1
 param set-default MNT_MAN_PITCH 2
 param set-default MNT_RC_IN_MODE 1
@@ -164,8 +164,6 @@ param set-default RC_MAP_AUX2       5
 param set-default RC_MAP_AUX3       10
 param set-default RC_MAP_AUX4       8
 param set-default RC_MAP_FLTMODE    6
-param set-default RC_MAP_RETURN_SW  7
-
 param set-default RC1_TRIM          1000


@@ -21,7 +21,10 @@
 # @board cuav_x7pro exclude
 #

-. ${R}etc/init.d/rc.mc_defaults
+set VEHICLE_TYPE mc
+set MIXER quad_x
+set PWM_OUT 1234
+

 # Attitude & rate gains
 param set-default MC_ROLLRATE_D 0.0013
@@ -21,7 +21,10 @@
 # @maintainer Hyon Lim <lim@uvify.com>
 #

-. ${R}etc/init.d/rc.mc_defaults
+set VEHICLE_TYPE mc
+set MIXER quad_x
+set PWM_OUT 1234
+

 # Attitude & rate gains
 param set-default MC_ROLLRATE_D 0.0013
@@ -24,6 +24,10 @@

 . ${R}etc/init.d/rc.mc_defaults

+
+# Configure this as Quadrotor
+# set MAV_TYPE 14
+
 # Set mixer
 set MIXER tilt_quad
 set MIXER_AUX tilt_quad
@@ -48,6 +48,8 @@ param set-default NAV_ACC_RAD 0.5
 param set-default PWM_MAIN_DISARM 1500
 param set-default PWM_MAIN_MAX 2000
 param set-default PWM_MAIN_MIN 1000
+# Configure this as rover
+set MAV_TYPE 10

 # Set mixer
 set MIXER rover_generic
@@ -76,6 +76,9 @@ param set-default RBCLW_SER_CFG 104
 # Start this driver after setting parameters, because the driver uses some of those parameters.
 # roboclaw start /dev/ttyS3

+# Configure this as rover
+set MAV_TYPE 10
+
 # Set mixer
 set MIXER generic_diff_rover

@@ -65,6 +65,9 @@ param set-default PWM_MAIN_MIN4 970
 # Enable Airspeed check circuit breaker because Rovers will have no airspeed sensor
 param set-default CBRK_AIRSPD_CHK 162128

+# Configure this as rover
+set MAV_TYPE 10
+
 # Set mixer
 set MIXER rover_diff_and_servo

@@ -16,4 +16,7 @@
 # disable circuit breaker for airspeed sensor
 param set-default CBRK_AIRSPD_CHK 162128

+set MAV_TYPE 12
+param set MAV_TYPE ${MAV_TYPE}
+
 set MIXER uuv_x
@@ -16,4 +16,7 @@
 # disable circuit breaker for airspeed sensor
 param set-default CBRK_AIRSPD_CHK 162128

+set MAV_TYPE 12
+param set MAV_TYPE ${MAV_TYPE}
+
 set MIXER uuv_x
@@ -23,26 +23,6 @@

 . ${R}etc/init.d/rc.mc_defaults

-# MAV_TYPE_HEXAROTOR 13
-param set-default MAV_TYPE 13
-
-param set-default CA_ROTOR_COUNT 6
-param set-default CA_ROTOR0_PX 0.0
-param set-default CA_ROTOR0_PY 0.5
-param set-default CA_ROTOR0_KM -0.05
-param set-default CA_ROTOR1_PX 0.0
-param set-default CA_ROTOR1_PY -0.5
-param set-default CA_ROTOR2_PX 0.43
-param set-default CA_ROTOR2_PY -0.25
-param set-default CA_ROTOR2_KM -0.05
-param set-default CA_ROTOR3_PX -0.43
-param set-default CA_ROTOR3_PY 0.25
-param set-default CA_ROTOR4_PX 0.43
-param set-default CA_ROTOR4_PY 0.25
-param set-default CA_ROTOR5_PX -0.43
-param set-default CA_ROTOR5_PY -0.25
-param set-default CA_ROTOR5_KM -0.05
-
 set MIXER hexa_x

 # Need to set all 8 channels
@@ -27,8 +27,9 @@

 . ${R}etc/init.d/rc.mc_defaults

-# MAV_TYPE_HEXAROTOR 13
-param set-default MAV_TYPE 13
+set MIXER hexa_x
+set PWM_OUT 12345678
+

 ###############################################
 # Attitude & rate gains
@@ -119,7 +120,3 @@ param set-default MAV_1_MODE 2
 param set-default MAV_1_FORWARD 1
 param set-default MAV_1_RATE 800000
 param set-default SER_TEL2_BAUD 921600
-
-
-set MIXER hexa_x
-set PWM_OUT 12345678
@@ -0,0 +1,52 @@
+#!/bin/sh
+#
+# @name Hex X with control allocation
+#
+# @type Hexarotor x
+# @class Copter
+#
+# @maintainer Silvan Fuhrer
+#
+# @board px4_fmu-v2 exclude
+#
+
+. ${R}etc/init.d/rc.mc_defaults
+
+param set-default SYS_CTRL_ALLOC 1
+
+param set-default CA_AIRFRAME 0
+param set-default CA_ROTOR_COUNT 6
+
+param set-default CA_ROTOR0_PX 0.0
+param set-default CA_ROTOR0_PY 0.275
+param set-default CA_ROTOR0_KM -0.05
+
+param set-default CA_ROTOR1_PX 0.0
+param set-default CA_ROTOR1_PY -0.275
+param set-default CA_ROTOR1_KM 0.05
+
+param set-default CA_ROTOR2_PX 0.238
+param set-default CA_ROTOR2_PY -0.1375
+param set-default CA_ROTOR2_KM -0.05
+
+param set-default CA_ROTOR3_PX -0.238
+param set-default CA_ROTOR3_PY 0.1375
+param set-default CA_ROTOR3_KM 0.05
+
+param set-default CA_ROTOR4_PX 0.238
+param set-default CA_ROTOR4_PY 0.1375
+param set-default CA_ROTOR4_KM 0.05
+
+param set-default CA_ROTOR5_PX -0.238
+param set-default CA_ROTOR5_PY -0.1375
+param set-default CA_ROTOR5_KM -0.05
+
+param set-default PWM_MAIN_FUNC1 101
+param set-default PWM_MAIN_FUNC2 102
+param set-default PWM_MAIN_FUNC3 103
+param set-default PWM_MAIN_FUNC4 104
+param set-default PWM_MAIN_FUNC5 105
+param set-default PWM_MAIN_FUNC6 106
+
+set MIXER skip
+set MIXER_AUX none
@@ -23,26 +23,6 @@

 . ${R}etc/init.d/rc.mc_defaults

-# MAV_TYPE_HEXAROTOR 13
-param set-default MAV_TYPE 13
-
-param set-default CA_ROTOR_COUNT 6
-param set-default CA_ROTOR0_PX 0.5
-param set-default CA_ROTOR0_PY 0.0
-param set-default CA_ROTOR0_KM -0.05
-param set-default CA_ROTOR1_PX -0.5
-param set-default CA_ROTOR1_PY 0.0
-param set-default CA_ROTOR2_PX -0.25
-param set-default CA_ROTOR2_PY -0.43
-param set-default CA_ROTOR2_KM -0.05
-param set-default CA_ROTOR3_PX 0.25
-param set-default CA_ROTOR3_PY 0.43
-param set-default CA_ROTOR4_PX 0.25
-param set-default CA_ROTOR4_PY -0.43
-param set-default CA_ROTOR5_PX -0.25
-param set-default CA_ROTOR5_PY 0.43
-param set-default CA_ROTOR5_KM -0.05
-
 set MIXER hexa_+

 # Need to set all 8 channels
@@ -25,31 +25,6 @@

 . ${R}etc/init.d/rc.mc_defaults

-# MAV_TYPE_OCTOROTOR 14
-param set-default MAV_TYPE 14
-
-param set-default CA_ROTOR_COUNT 8
-param set-default CA_ROTOR0_KM -0.05
-param set-default CA_ROTOR0_PX 0.46
-param set-default CA_ROTOR0_PY 0.19
-param set-default CA_ROTOR1_KM -0.05
-param set-default CA_ROTOR1_PX -0.46
-param set-default CA_ROTOR1_PY -0.19
-param set-default CA_ROTOR2_PX 0.19
-param set-default CA_ROTOR2_PY 0.46
-param set-default CA_ROTOR3_PX -0.46
-param set-default CA_ROTOR3_PY 0.19
-param set-default CA_ROTOR4_PX 0.46
-param set-default CA_ROTOR4_PY -0.19
-param set-default CA_ROTOR5_PX -0.19
-param set-default CA_ROTOR5_PY -0.46
-param set-default CA_ROTOR6_KM -0.05
-param set-default CA_ROTOR6_PX 0.19
-param set-default CA_ROTOR6_PY -0.46
-param set-default CA_ROTOR7_KM -0.05
-param set-default CA_ROTOR7_PX -0.19
-param set-default CA_ROTOR7_PY 0.46
-
 set MIXER octo_x

 set PWM_OUT 12345678
@@ -25,9 +25,6 @@

 . ${R}etc/init.d/rc.mc_defaults

-# MAV_TYPE_OCTOROTOR 14
-param set-default MAV_TYPE 14
-
 set MIXER octo_+

 set PWM_OUT 12345678
@@ -72,6 +72,7 @@ px4_add_romfs_files(
 	4015_holybro_s500
 	4016_holybro_px4vision
 	4017_nxp_hovergames
+	4018_s500_ctrlalloc
 	4019_x500_v2
 	4030_3dr_solo
 	4031_3dr_quad
@@ -99,6 +100,7 @@ px4_add_romfs_files(
 	# [6000, 6999] Hexarotor x"
 	6001_hexa_x
 	6002_draco_r
+	6003_hexa_x_ctrlalloc

 	# [7000, 7999] Hexarotor +"
 	7001_hexa_+
@@ -7,9 +7,6 @@

 set VEHICLE_TYPE airship

-# MAV_TYPE_AIRSHIP 7
-param set-default MAV_TYPE 7
-
 #
 # This is the gimbal pass mixer.
 #
@@ -7,9 +7,6 @@

 set VEHICLE_TYPE fw

-# MAV_TYPE_FREE_BALLOON 8
-param set-default MAV_TYPE 8
-
 #
 # Default parameters for balloon UAVs.
 #
@@ -7,9 +7,6 @@

 set VEHICLE_TYPE rover

-# MAV_TYPE_SURFACE_BOAT 11
-param set-default MAV_TYPE 11
-
 #
 # Default parameters for UGVs.
 #
@@ -7,9 +7,6 @@

 set VEHICLE_TYPE fw

-# MAV_TYPE_FIXED_WING 1
-param set-default MAV_TYPE 1
-
 #
 # Default parameters for fixed wing UAVs.
 #
@@ -7,9 +7,6 @@

 set VEHICLE_TYPE mc

-# MAV_TYPE_QUADROTOR 2
-param set-default MAV_TYPE 2
-
 if param compare IMU_GYRO_RATEMAX 400
 then
 	param set-default IMU_GYRO_RATEMAX 800
@@ -7,9 +7,6 @@

 set VEHICLE_TYPE rover

-# MAV_TYPE_GROUND_ROVER 10
-param set-default MAV_TYPE 10
-
 #
 # Default parameters for UGVs.
 #
@@ -130,13 +130,6 @@ then
 	fi
 fi

-# SHT3x temperature and hygrometer sensor, external I2C
-if param compare -s SENS_EN_SHT3X 1
-then
-	sht3x start -X
-	sht3x start -X -a 0x45
-fi
-
 # TE MS4525 differential pressure sensor external I2C
 if param compare -s SENS_EN_MS4525 1
 then
@@ -149,26 +142,6 @@ then
 	ms5525_airspeed start -X
 fi

-# IR-LOCK sensor external I2C
-if param compare -s SENS_EN_IRLOCK 1
-then
-	irlock start -X
-fi
-
-# SPL06 sensor external I2C
-if param compare -s SENS_EN_SPL06 1
-then
-	spl06 -X start
-	spl06 -X -a 0x77 start
-fi
-
-# PCF8583 counter (RPM sensor)
-if param compare -s SENS_EN_PCF8583 1
-then
-	pcf8583 start -X
-	pcf8583 start -X -a 0x51
-fi
-
 # probe for optional external I2C devices
 if param compare SENS_EXT_I2C_PRB 1
 then
@@ -7,9 +7,6 @@

 set VEHICLE_TYPE uuv

-# MAV_TYPE_SUBMARINE 12
-param set-default MAV_TYPE 12
-
 param set-default PWM_MAIN_MAX 1950
 param set-default PWM_MAIN_MIN 1050
 param set-default PWM_MAIN_DISARM 1500
@@ -12,9 +12,19 @@ if [ $VEHICLE_TYPE = fw ]
 then
 	if [ $MIXER = none ]
 	then
-		echo "FW mixer undefined"
+		# Set default mixer for fixed wing if not defined.
+		set MIXER AERT
 	fi

+	if [ $MAV_TYPE = none ]
+	then
+		# Set a default MAV_TYPE = 1 if not defined.
+		set MAV_TYPE 1
+	fi
+
+	# Set the mav type parameter.
+	param set MAV_TYPE ${MAV_TYPE}
+
 	# Load mixer and configure outputs.
 	. ${R}etc/init.d/rc.interface

@@ -32,6 +42,41 @@ then
 		echo "MC mixer undefined"
 	fi

+	if [ $MAV_TYPE = none ]
+	then
+		# Set a default MAV_TYPE = 2 if not defined.
+		set MAV_TYPE 2
+
+		# Use mixer to detect vehicle type
+		if [ $MIXER = coax ]
+		then
+			set MAV_TYPE 3
+		fi
+		if [ $MIXER = hexa_x -o $MIXER = hexa_+ ]
+		then
+			set MAV_TYPE 13
+		fi
+		if [ $MIXER = hexa_cox ]
+		then
+			set MAV_TYPE 13
+		fi
+		if [ $MIXER = octo_x -o $MIXER = octo_+ ]
+		then
+			set MAV_TYPE 14
+		fi
+		if [ $MIXER = octo_cox -o $MIXER = octo_cox_w ]
+		then
+			set MAV_TYPE 14
+		fi
+		if [ $MIXER = tri_y_yaw- -o $MIXER = tri_y_yaw+ ]
+		then
+			set MAV_TYPE 15
+		fi
+	fi
+
+	# Set the mav type parameter.
+	param set MAV_TYPE ${MAV_TYPE}
+
 	# Load mixer and configure outputs.
 	. ${R}etc/init.d/rc.interface

@@ -46,9 +91,19 @@ if [ $VEHICLE_TYPE = rover ]
 then
 	if [ $MIXER = none ]
 	then
-		echo "rover mixer undefined"
+		# Set default mixer for UGV if not defined.
+		set MIXER rover_generic
 	fi

+	if [ $MAV_TYPE = none ]
+	then
+		# Set a default MAV_TYPE = 10 if not defined.
+		set MAV_TYPE 10
+	fi
+
+	# Set the mav type parameter.
+	param set MAV_TYPE ${MAV_TYPE}
+
 	# Load mixer and configure outputs.
 	. ${R}etc/init.d/rc.interface

@@ -66,6 +121,25 @@ then
 		echo "VTOL mixer undefined"
 	fi

+	if [ $MAV_TYPE = none ]
+	then
+		# Set a default MAV_TYPE = 19 if not defined.
+		set MAV_TYPE 19
+
+		# Use mixer to detect vehicle type.
+		if [ $MIXER = firefly6 ]
+		then
+			set MAV_TYPE 21
+		fi
+		if [ $MIXER = quad_x_pusher_vtol ]
+		then
+			set MAV_TYPE 22
+		fi
+	fi
+
+	# Set the mav type parameter.
+	param set MAV_TYPE ${MAV_TYPE}
+
 	# Load mixer and configure outputs.
 	. ${R}etc/init.d/rc.interface

@@ -83,6 +157,15 @@ then
 		echo "Airship mixer undefined"
 	fi

+	if [ $MAV_TYPE = none ]
+	then
+		# Set a default MAV_TYPE = 7 if not defined.
+		set MAV_TYPE 7
+	fi
+
+	# Set the mav type parameter.
+	param set MAV_TYPE ${MAV_TYPE}
+
 	# Load mixer and configure outputs.
 	. ${R}etc/init.d/rc.interface

@@ -100,11 +183,19 @@ then
 		echo "UUV mixer undefined"
 	fi

+	if [ $MAV_TYPE = none ]
+	then
+		# Set default MAV_TYPE to submarine if not defined
+		set MAV_TYPE 12
+	fi
+
+	param set MAV_TYPE ${MAV_TYPE}
 	# Load mixer and configure outputs.
 	. ${R}etc/init.d/rc.interface

 	# Start standard vtol apps.
 	. ${R}etc/init.d/rc.uuv_apps
+
 fi


@@ -7,9 +7,6 @@

 set VEHICLE_TYPE vtol

-# MAV_TYPE_VTOL_RESERVED2 22
-param set-default MAV_TYPE 22
-
 param set-default MIS_TAKEOFF_ALT 20
 param set-default MIS_YAW_TMT 10

@@ -29,6 +29,7 @@ set IOFW "/etc/extras/px4_io-v2_default.bin"
 set IO_PRESENT no
 set LOGGER_ARGS ""
 set LOGGER_BUF 8
+set MAV_TYPE none
 set MIXER none
 set MIXER_AUX none
 set MIXER_FILE none
@@ -485,11 +486,11 @@ else
 	. ${R}etc/init.d/rc.thermal_cal

 	#
-	# Start gimbal to control mounts such as gimbals, disabled by default.
+	# Start vmount to control mounts such as gimbals, disabled by default.
 	#
 	if param greater -s MNT_MODE_IN -1
 	then
-		gimbal start
+		vmount start
 	fi

 	# Check for flow sensor
@@ -572,6 +573,7 @@ unset IO_PRESENT
 unset IOFW
 unset LOGGER_ARGS
 unset LOGGER_BUF
+unset MAV_TYPE
 unset MIXER
 unset MIXER_AUX
 unset MIXER_FILE
@@ -1,7 +1,5 @@
 Mixer for Tailsitter with x motor configuration and elevons
 ===========================================================
-# @board px4_fmu-v2 exclude
-# @board omnibus_f4sd exclude

 This file defines a single mixer for tailsitter with motors in X configuration.  All controls
 are mixed 100%.
@@ -35,6 +35,7 @@ do
 	${DIR}/run_nsh_cmd.py --device ${SERIAL_DEVICE} --cmd 'param set MAV_0_CONFIG 101' || true
 	${DIR}/run_nsh_cmd.py --device ${SERIAL_DEVICE} --cmd 'param set MAV_1_CONFIG 102' || true
 	${DIR}/run_nsh_cmd.py --device ${SERIAL_DEVICE} --cmd 'param set MAV_2_CONFIG 103' || true
+	${DIR}/run_nsh_cmd.py --device ${SERIAL_DEVICE} --cmd 'param set MAV_3_CONFIG 104' || true

 	# enable all GPS
 	${DIR}/run_nsh_cmd.py --device ${SERIAL_DEVICE} --cmd 'param set GPS_1_CONFIG 201' || true
@@ -39,7 +39,7 @@ function spawn_model() {

 	echo "Spawning ${MODEL}_${N} at ${X} ${Y}"

-	gz model --spawn-file=/tmp/${MODEL}_${N}.sdf --model-name=${MODEL}_${N} -x ${X} -y ${Y} -z 0.83
+	gz model --spawn-file=/tmp/${MODEL}_${N}.sdf --model-name=${MODEL}_${N} -x ${X} -y ${Y} -z 0.0

 	popd &>/dev/null

@@ -150,7 +150,7 @@ simulator,CONFIG_MODULES_SIMULATOR=y
 temperature_compensation,CONFIG_MODULES_TEMPERATURE_COMPENSATION=y
 uuv_att_control,CONFIG_MODULES_UUV_ATT_CONTROL=y
 uuv_pos_control,CONFIG_MODULES_UUV_POS_CONTROL=y
-gimbal,CONFIG_MODULES_GIMBAL=y
+vmount,CONFIG_MODULES_VMOUNT=y
 vtol_att_control,CONFIG_MODULES_VTOL_ATT_CONTROL=y
 bl_update,CONFIG_SYSTEMCMDS_BL_UPDATE=y
 dmesg,CONFIG_SYSTEMCMDS_DMESG=y
@@ -330,11 +330,9 @@ def get_mixers(yaml_config, output_functions, verbose):
        option = select_param + '==' + str(type_index)
        mixer_config = {
                'option': option,
-                'help-url': 'https://docs.px4.io/master/en/config/actuators.html',
            }
-        for optional in ['type', 'title']:
-            if optional in current_type:
-                mixer_config[optional] = current_type[optional]
+        if 'type' in current_type:
+            mixer_config['type'] = current_type['type']
        actuators = []
        for actuator_conf in current_type['actuators']:
            actuator = {
@@ -7,8 +7,7 @@ import os
 import math
 import matplotlib.pyplot as plt
 import numpy as np
-
-from scipy.signal import medfilt
+import scipy as sp

 from pyulog import *

@@ -66,7 +65,7 @@ def resampleWithDeltaX(x,y):
    return resampledX,resampledY

 def median_filter(data):
-    return medfilt(data, 31)
+    return sp.signal.medfilt(data, 31)

 parser = argparse.ArgumentParser(description='Reads in IMU data from a static thermal calibration test and performs a curve fit of gyro, accel and baro bias vs temperature')
 parser.add_argument('filename', metavar='file.ulg', help='ULog input file')
@@ -16,7 +16,7 @@ class ModuleDocumentation(object):
    valid_categories = ['driver', 'estimator', 'controller', 'system',
                        'communication', 'command', 'template', 'simulation', 'autotune']
    valid_subcategories = ['', 'distance_sensor', 'imu', 'airspeed_sensor',
-                           'magnetometer', 'baro', 'optical_flow', 'rpm_sensor']
+                           'magnetometer', 'baro', 'optical_flow']

    max_line_length = 80 # wrap lines that are longer than this

@@ -268,14 +268,10 @@ for serial_command in serial_commands:
                default_port_str = port_config['default'][i]
            else:
                default_port_str = port_config['default']
-
            if default_port_str != "":
                if default_port_str not in serial_ports:
                    raise Exception("Default Port {:} not found for {:}".format(default_port_str, serial_command['label']))
-
-                if default_port_str in dict(board_ports).keys():
-                    default_port = serial_ports[default_port_str]['index']
-
+                default_port = serial_ports[default_port_str]['index']

        commands.append({
            'command': serial_command['command'],
@@ -192,7 +192,7 @@ elif [ "$program" == "ignition" ] && [ -z "$no_sim" ]; then
 		ignition_headless=""
 	fi
 	source "$src_path/Tools/setup_ignition.bash" "${src_path}" "${build_path}"
-	ign gazebo --force-version 5 ${verbose} ${ignition_headless} -r "${src_path}/Tools/simulation-ignition/worlds/${model}.world"&
+	ign gazebo ${verbose} ${ignition_headless} -r "${src_path}/Tools/simulation-ignition/worlds/${model}.world"&
 elif [ "$program" == "flightgear" ] && [ -z "$no_sim" ]; then
 	echo "FG setup"
 	cd "${src_path}/Tools/flightgear_bridge/"
@@ -56,21 +56,6 @@ def get_N_colors(N, s=0.8, v=0.9):
        hex_out.append("#"+"".join(map(lambda x: format(x, '02x'), rgb)))
    return hex_out

-def topic_filename(topic):
-    MSG_PATH = 'msg/'
-
-    file_list = os.listdir(MSG_PATH)
-    msg_files = [file.replace('.msg', '') for file in file_list if file.endswith(".msg")]
-
-    if topic in msg_files:
-        return topic
-    else:
-        for msg_file in msg_files:
-            with open(f'{MSG_PATH}/{msg_file}.msg') as f:
-                ret = re.findall(f'^# TOPICS.*{topic}.*',f.read(),re.MULTILINE)
-                if len(ret) > 0:
-                    return msg_file
-    return "no_file"

 class PubSub(object):
    """ Collects either publication or subscription information for nodes
@@ -694,7 +679,8 @@ class OutputJSON(object):
            node['type'] = 'topic'
            node['color'] = topic_colors[topic]
            # url is opened when double-clicking on the node
-            node['url'] = 'https://github.com/PX4/PX4-Autopilot/blob/master/msg/'+topic_filename(topic)+'.msg'
+            # TODO: does not work for multi-topics
+            node['url'] = 'https://github.com/PX4/PX4-Autopilot/blob/master/msg/'+topic+'.msg'
            nodes.append(node)

        data['nodes'] = nodes
--- a/Show More
+++ b/Show More
Author	SHA1	Message	Date
Daniel Agar	61778511ea	lib/matrix: inline common Vector3f operators	2022-01-21 12:53:26 -05:00
Daniel Agar	56de0e27d8	PX4 ROS2 msg conformity and explicit topics - .msg files are PascalCase - topics are still either per msg or explicitly listed in TOPICS - compatible structs are still generated (eg struct msg_s), but ROS2 style px4::msg::Msg is also available	2022-01-21 09:32:30 -05:00